Corcom EMI/RFI Filter Product Overview TE Connectivity offers over 300 solutions for EMI/RFI problems associated with susceptibility, as well as compliance with international emissions standards. Corcom filters are available in a wide range of single and 3-phase designs as well as IEC inlet and power entry modules which can combine several functions to reduce cost, space and labor. Solutions are also available for DC applications and applications requiring extremely high performance with feedthrough filters and capacitors for a wide range of applications. TE Connectivity Corcom Filter Products FILTER TYPE POWER LINE FILTERS B Series K Series DK Series SERIES PERFORMANCE General Purpose Approvals UL / CSA / VDE UL / CSA / VDE UL / CSA / VDE Features General purpose RFI Filters for high General purpose RFI power line Enhanced differential mode impedance load / low current filters for high impedance loads performance K Series RFI line filters • General purpose • Well suited to applications • Higher performance line to line where pulsed, continuous and/ attenuation than the K Series • Wide variety of termination options or intermittent RFI interference is • E version meets the very low present • Meets low leakage current leakage current requirements for requirements of VDE portable • EK models meet the very low VDE portable equipment and non- equipment and non-patient medical leakage current requirements for patient care medical equipment equipment VDE portable equipment and non- • V version features same high patient care medical equipment performance with more • Available with ground line inductor cost-effective design (choke) ELECTRICAL PARAMETERS Max. voltage 250 VAC 250 VAC 250 VAC Current Ratings 1, 2, 3, 5, 10, 20 or 30A 1, 2, 3, 5, 10, 20, 30, 40 or 60A 1, 3, 6, 10 or 20A VK Models: .5 mA / 1.0 mA Leakage current each Line to Ground VB Models: .4 mA / .7 mA VDK Models: .4 mA / .7 mA @ 120VAC 60Hz / 250VAC 50Hz EB Models: .21 mA / .36 mA EK Models: .21 mA / .36 mA EDK Models: .22 mA / .38 mA Electrical Setup Single stage Single stage Dual stage MECHANICAL PARAMETERS Mounting features Screw mounting Screw mounting (flange or panel) Screw mounting Termination inputs .25 [6.3] spade terminals, .25 [6.3] spade terminals, .25 [6.3] spade terminals, 8-32 terminal bolt & nut or 8-32 terminal bolt & nut, 8-32 terminal bolt & nut or wire leads wire leads or IEC 60320-1 C14 or C20 wire leads Termination outputs .25 [6.3] spade terminals, .25 [6.3] spade terminals, .25 [6.3] spade terminals, 8-32 terminal bolt & nut or 8-32 terminal bolt & nut or 8-32 terminal bolt & nut or wire leads wire leads wire leads TYPICAL APPLICATIONS Wide band RFI suppression Universal filter for applications Universal filter for applications requiring mid-range attenuation for applications requiring low requiring improved attenuation including: attenuation including: including: • HVAC • TV / Audio / Video • TV / Audio / Video • Computing & accessories • TV / Audio / Video • Computing & accessories • Home appliances • Computing & accessories • Home appliances • Medical equipment • Home appliances • Medical equipment • Gaming machines • Medical equipment • Gaming machines • Exercise equipment • Battery charging systems • Exercise equipment • Test measurement equipment • Exercise equipment corcom.com TE Connectivity Corcom Filter Products POWER LINE FILTERS (Continued) R Series EBP, EDP, EOP Series WG Series X, Y & Z Series General Purpose Wide Range Performance UL / CSA / VDE UL / CSA / VDE UL / CSA / VDE UL / CSA / VDE Two-stage general purpose RFI PC board mountable general High performance, low cost filter Chassis or PC Board Mountable power line filter purpose RFI filters ideal for appliance equipment Power Line Filters for Emission Control • Dual T section RFI filter provides • General purpose • Cost effective premium performance • Compact chassis or PC board • Low leakage current • Tubular design mountable • Well suited for low impedance • Cost-effective • WGD, WGE and WGF versions loads where noisy RFI • Three levels of performance designed to comply with leakage environments are present • Compact size current requirements for appliances • Complete filtering solution in • Controls pulsed, continuous and/or which may be easily moved from minimal size • EDP model features enhanced intermittent interference one place to another differential mode performance • X Series for FCC Part 15J, Class B • ER model offers low leakage • Available in a variety of styles • EBP model features compact size • Y Series for EN55022, Level A current without deterioration of (less than 1” square) insertion loss • Z Series for EN55022, Level B • Medical version available in the HZ Series 250 VAC 250 VAC 250 VAC 250 VAC 1, 2, 3, 5, 10 or 20A 1, 3, 6 or 10A 16A 1, 2, 3, 4 or 6A VR Models: .4 mA / .7 mA EDP/EOP Models: .22 mA / .38 mA A, B & C Models: .76 mA / 1.27 mA .3 mA / .5 mA ER Models: .21 mA / .36 mA EBP Models: .13 mA / .21 mA D, E & F Models: .10 mA / .20 mA Single stage Single stage Single stage Single stage Screw mounting (flange or panel) PC board pins Screw-in mounting stud Screw mount or PC board pins .25 [6.3] spade terminals, PCB pins .025 [.635] square .25 [6.3] spade terminals, .25 [6.3] spade terminals or 8-32 terminal bolt & nut, wire leads or PCB pins .065[1.65] diagonal wire leads or IEC 60320-1 C14 RAST 5 header interface .25 [6.3] spade terminals, .25 [6.3] spade terminals, .25 [6.3] spade terminals or PCB pins .025 [.635] square 8-32 terminal bolt & nut or wire leads or PCB pins .065[1.65] diagonal wire leads RAST 5 header interface Universal filter for applications with Designed for PCB mounting for a Specially designed for the white RFI filter designed to bring most low impedance loads including: wide range of applications including: goods / appliance market. Offers digital equipment (including those wide band RFI suppression for many with switching power supplies) into • Motors • Gaming machines applications including: compliance with EN55022, Level A or B and FCC Part 15J, Class B • Semiconductor actuators • Cash terminals • Washing machines / dryers conducted emission limits. Ideal for • Home appliances • Office equipment all applications with limited space • Dishwashers including: • Gaming machines • Small consumer electronics • Refrigerators & freezers • Switching Power Supplies • Exercise equipment • TV / Audio / Video • Coffee Machines • Industrial single phase applications • Security systems • Computing & accessories • Hand held appliances & tools • Industrial equipment & controls • Ovens & ranges corcom.com TE Connectivity Corcom Filter Products FILTER TYPE POWER LINE FILTERS (Continued) S, V & W Series G & N Series SB Series SERIES PERFORMANCE Wide Range Performance Approvals UL / CSA / VDE UL / CSA / VDE UL / CSA / VDE Features Multipurpose Power Line RFI Filter High Performance RFI Filters for High Performance B Series RFI Line for Emission Control Switching Power Supplies For Filters increased filtering requirements • Effective when used to control • Enhanced performance version emissions in equipment using SCR • Designed to provide excellent of our popular B Series of RFI line and T2L circuits attenuation for most digital filters electronics equipment and help • S & W Series designed for high • Small size with enhanced comply with EN55022 Level A and impedance frequencies performance FCC Part 15J Class B • V Series designed for low • 30A version half the size of other • Broad frequency range of impedance frequencies 30A filters performance from 20kHz to 30MHz • Medical version available in the • Low leakage version available • Size and cost-effective solution MV Series ELECTRICAL PARAMETERS Max. voltage 250 VAC 250 VAC 250 VAC Current Ratings 3, 6, 10, 20 & 60A (60A S Series only) 6 & 10A 6, 10, 20 & 30A Leakage current each Line to Ground .3 mA / .5 mA (EG models) .75 mA / 1.25 mA (VSB models) .4 mA / .7 mA (S Series 3-10A) @ 120VAC 60Hz / 250VAC 50Hz 1.2 mA / 2.0 mA (VG & N models) .22 mA / .36 mA (ESB models) .75 mA / 1.25 mA (S Series 60A) .5 mA / .82 mA (V & W Series) .07 mA / .13 mA (MV Series) Single stage (6A models) Single stage Electrical Setup Dual stage Dual stage (10A models) MECHANICAL PARAMETERS Mounting features Screw mounting Screw mounting Screw mounting Termination inputs .25 [6.3] spade terminals or .25 [6.3] spade terminals .25 [6.3] spade terminals or terminal bolt & nut 8-32 terminal bolt & nut Termination outputs .25 [6.3] spade terminals or .25 [6.3] spade terminals .25 [6.3] spade terminals or terminal bolt & nut 8-32 terminal bolt & nut TYPICAL APPLICATIONS Multipurpose power line RFI filter Specifically designed for most digital Wide band RFI suppression for for emission control and high electronic equipment requiring a high applications requiring enhanced noise industrial environments and range of symmetric and asymmetric performance including: applications that require compliance attenuation including: • TV / Audio / Video with FCC Part 15, Subpart J and • Switching power supplies EN55022, Level A, down to 150kHz • Computing & accessories including: • Motor drives • Home appliances • Consumer electronics • Small machine tools • Medical equipment • Small machine tools • Industrial single-phase applications • Gaming machines • Food service equipment • Exercise equipment • Measurement & Instrumentation corcom.com TE Connectivity Corcom Filter Products POWER LINE FILTERS (Continued) SK Series RK Series EMC Series IK Series Wide Range Performance UL / CSA / VDE UL / CSA / VDE UL / CSA / VDE High Performance K Series RFI Line High Performance Compact Power Compact and Cost-effective Dual Single and 2-phase RFI Filters for Filters for SMPS Emission Control Line Filter Stage RFI Power Line Filters Industrial Applications • Designed to reduce conducted • Compact • Compact dual stage filter series • Excellent performance for noise to acceptable limits for applications with high interference • Single stage • Current rating up to 30A equipment that must comply with levels FCC / EN specifications • Significant differential mode • High differential mode attenuation • Designed for single or two-phase performance in the lower frequency range • Utilizes significantly higher element applications values than the general purpose K • Suitable for industrial machinery • High common mode performance • Available touch safe terminals Series provide easy connections and • Low input leakage current makes it • Ideal for switching mode power • ESK6C and VSK6C incorporate prevent inadvertent contact suitable for portable equipment supplies separate ground circuit inductor 250 VAC 250 VAC 250 VAC 500 VAC MAX. Line to Ground 3, 6, 10, 20, 30 & 40A 3, 6, 10, 15 & 20A 3, 6, 10, 15, 20 & 30A 1, 6, 16, 35, 50 & 80A .06 mA / 1.2 mA* (1 & 6A models) .4 mA / .7 mA (3-10A VSK models) .16 mA / .26 mA .21 mA / .43 mA (3-10A models) 1.7 mA / 3.2 mA* (16 - 50A models) .21 mA / .36 mA (3-10A ESK models) .73 mA / 1.52 mA (15-30A models) 5.2 mA / 9.9 mA* (80A model) .75 mA / 1.25 mA (3-10A VSK models) * 1A @ 289 VAC, 16-80A @ 277 VAC 50Hz .3 mA / .5 mA (3-10A ESK models) Single stage Dual stage Dual stage (6-80A models) Single stage Dual stage + ground choke (1A only) Screw mounting (flange or panel) Screw mounting Screw mounting Screw mounting .25 [6.3] spade terminals, .25 [6.3] spade terminals .25 [6.3] spade terminals, .25 [6.3] spade terminals or 8-32 terminal bolt & nut or DIN type terminal block and bolt/nut terminal bolt & nut, wire leads or IEC 60320-1 C14 wire leads .25 [ 6.3] spade terminals, .25 [6.3] spade terminals .25 [6.3] spade terminals, .25 [6.3] spade terminals, terminal bolt & nut or 8-32 terminal bolt & nut or wire leads or wire leads wire leads DIN type terminal block and bolt/nut Universal filter for consumer Wide band RFI suppression Wide band RFI suppression Wide band RFI filter for small to electronic applications requiring for applications requiring high for applications requiring high medium sized industrial equipment, a premium range of attenuation attenuation level including: attenuation levels including: power converters and variable speed including: motors. Provides suppression of • Consumer electronics • Consumer electronics industrial 2-phase applications with • TV / Audio / Video high RFI emissions including: • Industrial machinery equipment • Single phase industrial equipment • Computing & accessories • Transportation vehicles • Small machine tools • Inverters • Home appliances • Site applications • Home appliances • Switching power supplies • Medical equipment • Small construction machinery • Power supplies • Industrial equipment & controls • Exercise equipment corcom.com TE Connectivity Corcom Filter Products FILTER TYPE POWER LINE FILTERS (Continued) Q Series FC Series EP & VP Series SERIES PERFORMANCE Superior Performance Approvals UL / CSA / VDE UL / CSA / VDE * UL / CSA / VDE Features Highest Performance RFI Filters for Single Phase Power Line Filter for Dual Stage RFI Power Line Filters Switching Power Supplies Frequency Converters for Switching Mode Power Supplies • High attenuation for common and • Designed for frequency inverters • Dual stage filter offers high differential mode interference and variable speed motor drives insertion loss • Effective from 10kHz to 30MHz • Suitable for electronically noisy • Well suited for meeting CISPR 22 A environments and FCC Part 15J, Class B • Optimized for attenuation and size • Protects programmable logic • EP model meets very low leakage • 3 or 6A versions available controllers from RF noise on the AC current requirements with IEC inlet power line • 7 and 12A versions offer optimum • Medical version available in the • Touch safe terminals package size HQ Series ELECTRICAL PARAMETERS Max. voltage 250 VAC 250 VAC 250 VAC Current Ratings 3, 6 & 20A 6 & 10A 3, 6, 7, 10, 12 & 20A Leakage current each Line to Ground 3.9 mA / 7.0 mA (B suffix, single stage) .73 mA / 1.27 mA (VP models) .73 mA / 1.27 mA (3 & 20A VQ models) @ 120VAC 60Hz / 250VAC 50Hz 3.8 mA / 6.7 mA (no suffix, dual stage) .21 mA / .36 mA (EP models) .22 mA / .38 mA (3 & 20A EQ models) .29 mA / .51 mA (6A EQ models) Single stage (B suffix) Dual stage Electrical Setup Dual stage Dual stage (no suffix) (medical versions without y-capacitors) MECHANICAL PARAMETERS Mounting features Screw mounting (flange or panel) Screw mounting Screw mounting (flange or panel) Termination inputs .25 [6.3] spade terminals, DIN type terminals .25 [6.3] spade terminals, wire leads or IEC 60320-1 C14 wire leads, terminal bolt & nut, or IEC 60320-1 C14 Termination outputs .25 [6.3] spade terminals or DIN type terminals .25 [6.3] spade terminals, wire leads wire leads, or terminal bolt & nut TYPICAL APPLICATIONS Trouble shooter for wide banded RFI Wide band RFI suppression of Wide band attenuation for suppression of applications with very industrial single phase applications applications with very high RFI high RFI emissions including: with very high RFI emissions emissions. This filter series offers including: excellent attenuation for applications • Consumer electronics such as: • Drives with long motor-cables • Single phase industrial applications • Consumer electronics • Variable speed motor drive • Switching power supplies with applications • Single phase industrial applications transient currents • Drive motors and controllers • HVAC * VDE approvals for dual stage models up to 36A only corcom.com TE Connectivity Corcom Filter Products POWER LINE FILTERS (Continued) DC FILTERS FEEDTHROUGH FILTERS T Series AQ Series DA, DB, DC and DCP Series FFA, FFD, AFC, AFD Series Superior Performance General & High Purpose Superior Performance UL / CSA / VDE UL / CSA UL / CSA / VDE High Performance RFI Power High Frequency Power Line Filter DC filters available in a wide variety AC & DC rated feedthrough filters Line Filters for Switching Power or Power Entry Module of versions for DC system RFI issues and capacitors for highest rated Supplies performance • High common and differential • DA Series - Compact RFI Line Filter • Superior common-mode and mode performance from with DC Inlet Connection • FFA (AC rated) & FFD ( DC rated) premium differential-mode 10kHz to 1GHz feedthrough filters • DB Series - High Current DC Inlet attenuation • Available with an IEC inlet, Filter and Connectors • AFC (AC rated) & AFD (DC rated) • Smaller package sizes than the EP fuseholder and switch feedthrough capacitors • DC Series - General purpose line Series • Suitable for applications where filters for DC applications up to • Offers high reliability & • ET models with low leakage current computers are used to process 125VDC with many options performance for high frequency secret or confidential information applications • Medical versions available in the • P Series - adaptable power entry HT Series module for DC rated applications • Custom versions available 250 VAC 250 VAC 125 VDC (DA, DB) & 80VDC (DC, P) 250 VAC / 130 VDC 3, 6, 10, 15 & 20A 3, 6, 10, 15 & 20A 3, 6, 10 & 15A (DA Series) 10 to 300A (FFA/AFC/DFC) 60A (DB Series), 3 & 6A (P Series) 10 to 200A (FFD) 15, 30, 60, 100 & 125A (DA Series) .3 mA / .5 mA (ET models) 1.2 mA / 2.3 mA (3A models) .75 mA / 1.2 mA (VT models) .7 mA / 1.2 mA (6A models) Single (3-10A) & Dual stage (10-20A) Multi stage (medical versions without y-capacitors) Screw mounting Screw mounting (flange or panel) Screw mounting & snap-in Screw mounting .25 [6.3] spade terminals, Wire leads Spade terminals, PCB pins, wire Screw terminal wire leads, terminal bolt & nut, or leads, DA or DCB connector, or IEC 60320-1 C14 terminal bolt & nut .25 [ 6.3] spade terminals, Wire leads, or IEC 60320-1 C14 Spade terminals, PCB pins, wire Screw terminal wire leads, or terminal bolt & nut leads, DA or DCB connector, or terminal bolt & nut Wide band attenuation for Ideal filter series for hardened • Network routing equipment Universal applications including; applications with very high RFI applications where computers are • Servers • Servers and routers emissions including: used to process secret or confidential information. • Switching equipment • Base stations • Consumer electronics • Wireless cabinets • Transportation • Single phase industrial applications • Ethernet hubs • Telecom • Drive motors and controllers • Base stations • MRI rooms • Commercial & building equipment • Repeater stations • High current switch mode power supplies • Power supplies for all types of communications equipment • Military and aerospace corcom.com TE Connectivity Corcom Filter Products FILTER TYPE 3-PHASE FILTERS AYO Series AYA Series A Series SERIES PERFORMANCE General & High Purpose Wide Range Performance Approvals UL / CSA / VDE UL Recognized² UL / CSA / VDE Features Compact Low Current 3-phase 3-phase WYE RFI Power Line High Performance 3-phase RFI WYE RFI Filters Filters Filters for WYE Applications • For 3-phase, four wire, WYE • For 3-phase, four wire, WYE • Common mode and differential applications applications mode suppression from 50kHz to 30MHz • Filters each of the three lines plus • Cost-effective, universal 3-phase neutral filters • Optional end bell kits available to shield input and output terminals • Good for attenuation beginning at • Good attenuation over the 100kHz complete frequency range • AYP single stage for lower noise of 10kHz to 30MHz environments • Space saving design • Two different mounting styles • AYT dual stage provides highest • Low leakage current available performance ELECTRICAL PARAMETERS Max. voltage 440 VAC Phase to Phase 440 VAC Phase to Phase 440 VAC Phase to Phase 250 VAC Phase to Neutral / Ground 250 VAC Phase to Neutral / Ground 250 VAC Phase to Neutral / Ground Current Ratings 3, 6, 10 & 20A 16, 25, 36, 50, 63 & 100A 20, 30, 45 & 60A Leakage current each Line to Ground 1.62 mA / 2.82 mA 1.4 mA / 3.4 mA 2.0 mA / 3.0 mA (3 - 10A models) @ 120 VAC 60Hz / 250 VAC 50Hz @ 120 VAC 60Hz / 250 VAC 50Hz 3.5 mA / 5.5 mA (20A models) @ 120 VAC 60Hz / 250 VAC 50Hz Single stage Single stage (AYP Models) & Electrical Setup Single stage Dual stage (AYT Models) MECHANICAL PARAMETERS Mounting features Screw mounting (flange or panel) Screw mounting (flange or inserts) Screw mounting (inserts) Termination inputs .25 [6.3] spade terminals Terminal bolt & nut or Terminal bolt & nut DIN type terminals Termination outputs Terminal bolt & nut or Terminal bolt & nut .25 [6.3] spade terminals DIN type terminals TYPICAL APPLICATIONS Wide band RFI suppression for Universal filter series equipped with Wide band RFI suppression for general purpose 3-phase applications 2 different connecting versions industrial 3-phase applications with with low to middle RFI emissions including: high noise emissions (AYP models) including: and lower noise emissions (ATY • Uninterruptible power supplies models) including: • Vending machines • Industrial control systems • Large machine tools • Food service equipment • Machine tools • Customer machinery • Gaming machines • Input filter for motor drives • Small machine tools ² All models except 16AYA10, 30AYA10, 63AYA6, 63AYA6A and 100AYA6A corcom.com TE Connectivity Corcom Filter Products 3-PHASE FILTERS (Continued) FCD Series BCF Series AYC Series ADT Series Superior Performance UL Recognized UL & VDE UL Recognized³ UL Recognized 3-phase Delta External Power Line Compact 3-phase Delta RFI Filters 3-phase WYE RFI Power Line High Performance High Current Filter for Frequency Converters for Universal Applications Filters for High Noise Applications 3-phase Delta RFI Filters • Very high attenuation & high • Compact, light weight book-form • For 3-phase, four wire, WYE • Designed for very high insertion insertion loss design applications loss for Delta three phase, three wire applications • BS models optimized for very high • Insulated, high quality safety • Very high attenuation with low insertion loss terminals for input and output leakage current • Available with common or differential mode coils • BS models suitable for infeed/ • Good common and differential • Ideal for EMC troubleshooting and regenerative (ER) applications mode performance below 100kHz refurbishing in the field • Touch safe terminals provide • Touch safe terminals provide • Touch safe terminals provide easy connections and prevent easy connections and prevent easy connections and prevent inadvertent contact for safety inadvertent contact for safety inadvertent contact for safety 480 VAC Phase to Phase 480 VAC Phase to Phase 480 VAC Phase to Phase 480 VAC Phase to Phase 277 VAC Phase to Neutral / Ground 277 VAC Phase to Neutral / Ground 277 VAC Phase to Neutral / Ground 277 VAC Phase to Neutral / Ground 6 to 230A 7 to 130A 16 to 200A 63, 100, 160 & 200A Varies from .26 mA/V for 6A model 30 mA Varies from 62 / 106 mA/V for 16A 1.3A (ADT6) @ 277 VAC 50Hz to 3.25 mA/V for FCD10BS models to 111 / 192 mA/V for 200A model 2.6A (63ADT6S) refer to catalog or website for full ratings refer to catalog or website for full ratings 4.6A (100, 160, 200ADT6S) voltage drop to virtual N to PE/V @ 120 VAC 60Hz / 277 VAC 50Hz @ 277VAC 60Hz Single stage Single stage (B suffix models) & Single stage Single stage Dual stage (blank suffix models) with feedthrough capacitors Screw mounting (flange) Screw mounting (flange) Screw mounting (flange) Screw mounting (flange) DIN type terminals DIN type terminals DIN type terminals Terminal bolt & nut DIN type terminals DIN type terminals DIN type terminals Terminal bolt & nut Wide band RFI suppression for Specially suited for regeneration Wide band RFI suppression for WYE Ideal for industrial 3-phase industrial 3-phase applications with systems of returning power. Wide applications with very high applications with extremely high very high RFI emissions including: banded RFI suppression for industrial RFI emissions including: noise emissions including; 3-phase applications with very high • Machine tools • Frequency converters with very • High current motor drives RFI emissions including: long motor cables • Elevators & escalators • Spot-welding machines • 3-phase inverters & converters • Machine tools • Frequency converters • Any difficult application with very • Variable speed motor drives difficult noise suppression • Industrial cabinets • Process automation equipment • Elevators & escalators • Machine tools ² All models except 200AYC10B corcom.com TE Connectivity Corcom Filter Products FILTER TYPE POWER ENTRY MODULES SRB Series EEJ Series C Series SERIES PERFORMANCE General Purpose Wide Range Performance Approvals UL / CSA / VDE* UL / CSA / VDE UL / CSA / VDE* Features Minimum Depth, Cost-effective Cost-effective Medium Power Entry Module with Switch Shielded Power Inlet Filter Performance Power Inlet Filter • Two function power entry module Including the EJH/EJHS, EJM/EJMS • Wide range of capacitor values combining a DPST switch and an and EJS Models IEC 60320-1 inlet • Attenuates coupled EMI up to • Enhanced two element circuit 300MHz • Snap–in or flange mounting provides medium attenuation to 30MHz • Minimal to low leakage current • Available with or without a shielded versions are suitable for patient general purpose or medical grade • EJH & EJHS models feature minimal and non-patient contact medical filter leakage current suitable for patient equipment. contact medical applications • Two element circuit provides • Full range of mounting and enhanced EMI attenuation • EJM & EJMS models feature low termination options including leakage current, suitable for most • Reduce OEM wiring time with unique vertical and horizontal medical applications optional pre–connected line and orientation slide in mounts switch terminals eliminate the need for mounting • EJS models feature EEJ hardware performance in snap-in mounting ELECTRICAL PARAMETERS Max. voltage 250 VAC 250 VAC 250 VAC Current Ratings 15A* 1 to 20A 1, 3, 6, 10 or 15A* EEJ/EJS Models: .22 mA / .38 mA Varies by model from .2 µA to .24mA Leakage current each Line to Ground F models: .25 mA / .40 mA EJH Models: 2 µA / 5 µA @ 120VAC 60Hz / 250VAC 50Hz refer to catalog or website for full ratings H & non-filtered models: 2 µA / 5 µA EJM Models: .01 mA / .017 mA Electrical Setup Capacitive, 8 options available Single stage & unfiltered Single stage values from 33pF to 3300pF MECHANICAL PARAMETERS Mounting features Screw and snap-in mounting Screw and snap-in mounting Screw and snap-in mounting Termination inputs IEC 60320-1 C14 IEC 60320-1 C14 or C20 IEC 60320-1 C14 Termination outputs .25 [6.3] spade terminals, .25 [6.3] spade terminals, .187 [4.8] spade terminals (non-filtered) wire leads or PC board pins wire leads or PC board pins or .25 [6.3] spade terminals (Filtered) Available with or without pre-connected switch terminals TYPICAL APPLICATIONS Wide band RFI suppression for any Wide band RFI suppression for a Wide band RFI suppression for application with very limited space wide range of applications including: applications with limited space for the suppression unit including: including: • TV / Audio / Video • TV / Audio / Video • TV / Audio / Video • Computing & accessories • Computing & accessories • Computing & PC powers supplies • Home appliances • Home appliances • Network & cabeling systems • Medical equipment • Consumer electronics • Medical equipment • Gaming machines *15A versions are tested by UL to US and *15A versions are tested by UL to US and • Exercise equipment Canadian requirements and Canadian requirements and • Appliances are VDE approved at 10A are VDE approved at 10A corcom.com TE Connectivity Corcom Filter Products POWER ENTRY MODULES (Continued) CU Series GG & HG Series P Series EJT Series General Purpose Superior Performance UL / CSA / VDE* UL / CSA / VDE UL / CSA / VDE UL / CSA / VDE* C ompact 1U Height Switched Power Smallest Power Entry Module with Versatile Power Entry Module with High Performance Power Inlet Filter Entry Module Metric Fuse Holders Small Footprint • Superior EMI filter with IEC 60320-1 • Designed for popular 1U (1 ¾”) • Single or dual fusing • Snap-in or flange mounting inlet height rack mounted equipment • Two element circuit provides basic • Standard IEC 60321-1 C14 power • Double three element differential • Two function power entry module attenuation inlet mode circuit attenuates noise up combining a SPST switch and an to 1GHz • Available with an internal ground- • Both North American and metric IEC 60320-1 inlet circuit inductor (C versions) fusing capabilities • Up to 15A with IEC 60320-1 C14 • Snap–in, flange and flush mounting to isolate equipment chassis • Two voltage selection options • 20A rating with IEC 60320-1 C20 from power line ground at radio • Reduce OEM wiring time with frequencies • Optional DPST on/off switch • Spade terminals or wire leads optional pre–connected line and switch terminals • Multiple termination and mounting • Filter options for general purpose, styles medical and high-performance EMI filtering • Medical version as the HG Series identical to GG with dual fuse only 250 VAC 250 VAC 250 VAC 250 VAC 1, 3, 6, 10 or 15A* 1, 3, 6 & 10A 3, 6 & 10A Filtered, 10A non-filtered 1, 3, 6, 10 or 15A Filtered models: .25 mA / .40 mA HG Models: 2 µA / 5 µA H & L Models: 2 µA / 5 µA .21 mA / .36 mA Non-filtered models: 2 µA / 5 µA GG Models: .25 mA / .42 mA S & Z Models: .25 mA / .50 mA Single stage & unfiltered Single stage Single stage Dual stage (medical versions without y-capacitors) Screw and snap-in mounting Screw and snap-in mounting Screw and snap-in mounting Screw and snap-in mounting IEC 60320-1 C14 IEC 60320-1 C14 IEC 60320-1 C14 IEC 60320-1 C14 or C20 .187 [4.8] spade terminals .25 [6.3] spade terminals or .187 [4.8] spade terminals (standard) .25 [6.3] spade terminals or wire leads or .25 [6.3] spade terminals (L & Z) wire leads Available with or without pre-connected switch terminals Available with or without interconnection block for unfiltered versions Specially designed for 1U height Wide band RFI suppression for Wide band RFI suppression in over Specially designer to attenuate noise equipment racks and can be used in applications with very limited space 8000 configurations for a wide range in the high frequency range up to space limited applications including: including: of applications including: 1GHz for various electronic applications including: • Telecom • TV / Audio / Video • TV / Audio / Video • Plasma & LCD TV’s • Computing • Computing & accessories • Computing & accessories • Computing & accessories • TV / Audio / Video • Home appliances • Home appliances • Instrumentation & measurement • Consumer electronics • Medical equipment • Medical equipment *15A versions are tested by UL to US and • Gaming equipment • Gaming equipment *15A versions are tested by UL to US and Canadian requirements and Canadian requirements and • Fitness equipment • Fitness equipment are VDE approved at 10A are VDE approved at 10A • HVAC corcom.com FOR MORE INFORMATION corcom.com TE Technical Support Center Internet: te.com/help USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 Part numbers in this brochure are RoHS Compliant*, unless marked otherwise. *as defined www.te.com/leadfree te.com © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. company. All Rights Reserved. 1-1654250-1 CIS JG 08/2011 Corcom, TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this flyer, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this flyer are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.