TE CONNECTIVITY 1-1614782-4

Why buy from GID?

Quality

We are industry veterans who take pride in our work

Protection

Avoid the dangers of risky trading in the gray market

Access

Our network of suppliers is ready and at your disposal

Savings

Maintain legacy systems to prevent costly downtime

Speed

Time is of the essence, and we are respectful of yours

Details

Part Number 1-1614782-4
Manufacturer TE CONNECTIVITY
Category Resistors »  Resistor Fixed Single-Other Mounting
Price Request Quote
Lead Time Request Quote

Description

Res Thick Film 470 Ohm 10% 100W ±150ppm/°C Molded Screw Terminal Bolt-On Loose/Tray
1-1614782-4

Request a Quote

* indicates a required field.
Your Contact Information
Your Company/Organization
Your Requirement
By sending us your information, you are affirming your agreement with our Privacy Policy.
You will not receive unsolicited communications.

Our Process

Our Process: Preparation
Preparation

Once you accept your quote and confirm your order, we prepare by retrieving related parts and components from our inventory. Anything we do not currently have in stock is sourced.

Our Process: Receiving
Receiving

Upon receipt, all parts are visually inspected for damage and then photographed to document their condition. Parts acquired from vendors must meet our quality standards.

Our Process: Initial Testing
Initial Testing

Industrial computer boards and other parts we are equipped to evaluate are tested to verify functionality and discover possible damage.

Our Process: Refurbishment
Refurbishment

Industrial computer boards have all components with low MTBF numbers (such as capacitors and connectors) replaced and are washed in our PCB cleaner to remove dust and grime.

Our Process: Repair
Repair

Industrial computer boards are fully diagnosed and repaired by our engineers. Logs of the problems encountered and solutions implemented are recorded.

Our Process: Final Testing
Final Testing

Industrial computer boards have all I/O connections rigorously tested to ensure that everything is working properly before the board is certified as ready to ship.

Our Process: Shipping
Shipping

After photos are taken to document the exterior condition of the part, it is packaged and sent to the customer. ESD-safe materials are used to protect sensitive equipment on its journey.

Who We Are

Electronics Finder is a website of GID Industrial, an ISO 9001:2015-certified company that has specialized in servicing industrial computer boards and providing other industrial products for sectors including manufacturing, defense, aerospace, entertainment, healthcare, and more by utilizing our combined skills and vast international network of trusted suppliers since our founding in 2015.

Do you need a 1-1614782-4? We can help you find it at a competitive price!

Specifications

Manufacturer TE Connectivity
Manufacturers Part # 1-1614782-4
Industry Aliases BDS2A100470RK
Sub-Category Fixed Single-Other Mounting Resistors
Brand AMP
Factory Pack Quantity 50

Datasheet

Download "DDEController?Action=showdoc&DocId=Data+Sheet%7F1773308%7FA%7Fpdf%7FEnglish%7FENG_DS_1773308_A.pdf" (557 KiB)

Extracted Text

Thick Film Power Resistors Type BDS100 Series Key Features 2 � 100W in a 9.5cm footprint • Gives an impressive power density of 2 10.5W/cm � Virtually inductance-free • Inductance < 40nH � Wide resistance range: 0.47Ω to 1MΩ • Coupled with 1% tolerance gives ultimate design flexibility � Multiple terminal configurations and multi-resistor packages • The space saving solution � Partial discharge <10pC at 2kV • Guaranteeing quality, With less than 40nH inductance and a 100Watt power rating in an easy-mounting reliability and long life 38mm x 25mm Isotop case, the BDS100 offers high power density over a wide range of ohmic values (R47 – 1M0) and benefits from 10 years experience in the field. Available in 6 resistor configurations with 2 or 4 easy to connect terminals, the resistors are made from Applications quality materials for optimum reliability and stability with very low partial discharge. � Snubbing TE Connectivity can test resistors to conform to relevant customer specifications, and will (Low inductance) advise on the use of resistors for pulse energy and high voltage applications (HV designs � Balancing Resistor available). Resistors with alternative terminations or flying leads are available, and custom (Multi-resistor package) designs are welcome. This product is available via distribution. � Filter (Low inductance) � High Voltage Characteristics -Electrical � High Frequency Resistance Range: R47 - 1MO Resistance Tolerance: ± 10%, 5% (Tighter by discussion) TCR: R<1Ω ± 250ppm/°C R>1Ω ± 150ppm/°C Rated Power: Heatsink: 115°C / 100°C / 60°C 25W / 50W / 100W Capacitance: Parallel 15pF To Earth 40pF Series Inductance: 40nH (Maximum) Limiting Element Voltage: (100W or Less) 500Vdc/ac rms Isolating Voltage: (Terminal to Heatsink) 2.5kVac rms Single Shot Voltage: 1.5/50ms 4kV Insulation Resistance: (at 500V dc) >100GΩ Partial Discharge: at 2kV <10pC Heat Dissipation: Although the use of proprietary heat sinks with lower thermal resistance is acceptable, up rating is not recommended. The use of proprietary heat sink compound to improve thermal conductivity is essential. Characteristics - Environmental Endurance (Rated Power): 2000cyc. at PRated ΔR 0.25% Typ Humidity Load Life: 56 Days, 40°C, 95% RH ΔR 0.25% Typ (I.R.>10GΩ) Temperature Cycling: -55°C to +125°C, 5cycles ΔR 0.25% Typ Operating Storage Temp: -55°C to +125°C Short Term Overload: 3 x PRated (10s) ΔR 0.25% Typ Vibration: 10/500Hz ΔR 0.25% Typ Bump: 40g 4000 bumps ΔR 0.25% Typ 1773308 CIS BI 11/2011 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help and inches unless otherwise reference purposes only. specified. Values in brackets Specifications subject are standard equivalents. to change. Thick Film Power Resistors Type BDS100 Series Characteristics - Mechanical Terminal Size: M4 Terminal Torque (max.): 1.3Nm Creepage Distance: 10mm Clearance: Terminal to Heatsink 10mm Terminal to Terminal 3mm a Heatsink Surface Finish: R < 6μm Heatsink Flatness: 0.05mm Weight: 35g Dimensions M4 Nuts M4 Nuts 15.5 ±0.2 37.8 ±0.2 37.8 ±0.2 15.5 ±0.2 30 ±0.15 30 ±0.15 43 43 12 12 ø4.2 15 ±0.2 ø4.2 4.5 ±0.2 15 ±0.2 ø4.2 3.8 ±0.2 3.8 ±0.2 4.5 ±0.2 Terminal Circuit Type D (Isolated) A (Standard) 1 2 1 2 3 4 E (Network Tapped) B (Voltage Sense) 1 2 1 2 4 3 4 3 F (Network 3 Res.) C (Special) 3 4 3 1 1 2 Derating Curve Pulse Energy 100 10 80 60 0.1 40 20 0 0.1 0 20 40 60 80 100 120 0.01 0.1 1 10 Heatsink Temp. (degC) Time (msecs) How to Order BDS 2 A 100 1K0 J Common Part Circuit Type Power Dissipation Resistance Value Tolerance 0.6Ω (600mΩ) R60 BDS 2 (2 Terminal) F - 1% A: Standard 100 - 100 Watts BDS 4 (4 Terminal) J - 5% 1Ω (1000mΩ) 1R0 at 70°C B-F: See above K - 10% 1KΩ (1000Ω) 1KO 1MΩ (1000000Ω) 1MO TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this datasheet, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantabili- ty or fitness for a particular purpose. The dimensions in this datasheet are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. Power (W) 12 ±0.2 25.4 ±0.2 Energy (J) 12 ±0.2 25.4 ±0.2

Related Products

TE CONNECTIVITY
Res Thick Film 1K Ohm 10% 250W ±150ppm/°C Molded Screw Terminal Bolt-On Loo...
TE CONNECTIVITY
Res Thick Film 220 Ohm 10% 250W ±150ppm/°C Molded Screw Terminal Bolt-On Lo...
TE CONNECTIVITY
Res Thick Film 22 Ohm 10% 250W ±150ppm/°C Molded Screw Terminal Bolt-On Loo...
TE CONNECTIVITY
Res Thick Film 2.2 Ohm 10% 250W ±150ppm/°C Molded Screw Terminal Bolt-On Lo...
TE CONNECTIVITY
Res Thick Film 2.2 Ohm 10% 100W ±150ppm/°C Molded Screw Terminal Bolt-On Lo...
TE CONNECTIVITY
Res Thick Film 33 Ohm 10% 100W ±150ppm/°C Molded Screw Terminal Bolt-On Loo...

Disclaimer

Any product names, logos, brands, and other trademarks or media featured or referred to on Electronics Finder are the property of their respective owners.

GID Industrial is not an authorized distributor, reseller, or representative for the products featured on this site, and is not affiliated with, sponsored by, or endorsed by any of the manufacturers or holders of the rights to the aforementioned products.

All information on this site is displayed strictly for identification purposes and does not indicate a relationship with or an approval from any third parties.

Electronics Finder is a GID Industrial website.
GID Industrial Logo
Copyright © 2024 GID Holdings LLC, All Rights Reserved.
Page generated in 0.05 seconds.