Manufacturers
TE CONNECTIVITY 1-1623749-0
Description
Res Wirewound 27 Ohm 5% 14W 0ppm/??C to 60ppm/??C Conformal Coated AXL Loose/Tray
1-1623749-0
Part Number
1-1623749-0
Price
Request Quote
Manufacturer
TE CONNECTIVITY
Lead Time
Request Quote
Category
Resistors » Resistor Fixed Single-Through Hole
Specifications
Manufacturer
TE Connectivity
Manufacturers Part #
1-1623749-0
Industry Aliases
ER1727RJL
Sub-Category
Fixed Single-Through Hole Resistors
Brand
AMP
Factory Pack Quantity
100
Datasheet
DDEController?Action=srchrtrv&DocNm=1773212&DocType=Data+Sheet&DocLang=English&DocFormat=pdf.pdf
195 KiB
Extracted Text
High Power Resistors Type ER/ERV Series Type ER/ERV Series Characteristics - ER Series Electrical ER74 ER58 ER16 ER17 Power Rating (W) at 40°C: 3W 7W 11W 14W Power Rating (W) at 70°C: 2.5W 6W 9W 12W Resistance Range: R03-10K R05 - 20K R13-68K R20-100K Maximum Element Volts: 100V 200V 500V 750V Characteristics - ERV Series Electrical ERV74 ERV58 ERV16 A tough silicone coated power Power Rating (W) at 20°C*: 3W 7W 11W resistor. The coating and marking Power Rating (W) at 70°C*: 1.5W 3W 5W are resistant to Trichloroethene VG, Resistance Range: R10-3K9 R10-6K8 R15-27K Genklene LV Hot and Cold, Freon Maximum Element Volts: 100V 200V 500V TE, Arklone A, Flourosil E, Freon TMS, Arklone L Hot and Cold and * When mounted in the horizontal and vertical plane only - inverted mounting may result in heat damage of the PCB - Consult Technical Department Arklone F Hot. If the resistor is in contact with the PCB the maximum dissipation to avoid damage to the Characteristics - PCB may be ascertained by Environmental reference to the hot spot Temperature Category: -55°C to 200°C temperature graph. Vertical Humidity Classification: 56 days mounting style is available. The ER Standard Tolerances: ER Series < 1 ohm ± 10% ~ > 1 ohm ± 5% series is suited to a wide range of ERV Series E24 - 5% ~ E12 10% industrial, control, medical and Tolerances of down to: ± 0.5% are available consumer applications. Load Life Stability: ± 5% Temperature Coefficient*: < 1 ohm 0 ± 200ppm/°C maximum > 1 ohm 0 + 60 ppm/°C typical Key Features *Very low temperature coefficients to ± 20ppm/°C are available to special order ■ High Power Dissipation Solderability conforms to: BS 2011 Test 2.1 Ta Solder bath method (IEC 68-2-20) Wets in < 2 seconds ■ Tough Silicone Coating Termination Robustness: BS 2011 Test 2.1 Ua withstands 0.5 kg tensile load ■ Special Pulse Styles and double bend with 0.25 kg load Available Endurance - 1000hrs @ 200°C: ΔR -0 +2% Overload: 10 time rated dissipation for 5 seconds ΔR ± 0.5% ■ 0.5% Tolerance Available Humidity: 56 days/95% R.H./ +_45°C -0 +5% ■ Resistant to Most Temperature Rapid Change: ΔR ± 0.03% Solvents ■ Vertical Mount Styles Available ■ Custom Designs Welcomed Power Ratings Power Ratings ■ Widely Available via Dissipation / Ambient Temperature Hot Spot Temperature @ 40°C Distribution ER74 ER58 ER16 ER17 15 400 14 12 300 11 9 200 7 ER17 6 ER16 100 ER58 3 20 ER74 0 20 50 70 100 150 200 0 2 4 6 8 101214 16 Ambient Temperature (°C) Rating (Watts) Literature No. 1773212 Dimensions are shown for Dimensions are in Specifications subject to tycoelectronics.com Issued: 11-08 reference purposes only. millimetres unless change. passives.tycoelectronics.com otherwise specified. Watts Surface Temperature (°C) High Power Resistors Type ER/ERV Series Power Ratings (continued) Style 74 Style 58 (K) (K) VH VH 100 100 50 50 0 0 1 2 3 (W) 1 2 3 4 5 6 7 (W) Style 16 (K) VH 100 50 0 1 2 3 7 9 11 (W) Dimensions Type LD l d Type AB C ER74 13.5 6.0 38.0 0.8 ERV74 19.0 5.6 9.7 ER58 22.2 8.0 38.0 0.8 ERV58 29.0 8.0 10.6 ER16 38.1 8.0 38.0 0.8 ERV16 43.0 8.0 10.6 ER17 53.5 8.0 38.0 0.8 • Resistance measured 6mm either side of body. • Supplied in standard packs in arrays of 5 resistors with snap links for handling. Literature No. 1773212 Dimensions are shown for Dimensions are in Specifications subject to tycoelectronics.com Issued: 11-08 reference purposes only. millimetres unless change. passives.tycoelectronics.com otherwise specified. High Power Resistors Type ER/ERV Series Taping Specification Type A Max B ± 2.0 C ± 2.0 D Max ER74 13.50 76.00 88.00 1.00 ER58 22.20 86.00 98.00 1.00 ER16 38.10 82.50 100.50 - ER17 53.50 97.00 115.00 - How to Order ER 74 100R J T Common Part Power Rating Resistance Value Tolerance Pack Style at 40°C ER - Silicone T - Ammo Packed Coated 0.1 ohm D - ±0.5% 74 - 3W (100 milli ohms) R10 6P - 6mm Boot ERV - Silicone F - ±1% 58 - 7W (Boots on ERV Coated Vertical 1 ohm Only) Mount (1000 milli ohms) G - ±2% 16 - 11W 1R0 L - Loose (Standard for J - ±5% 17 - 14W 1K ohm ER16 / ER17 only) (1000) ohms) 1K0 K - ±10% ER17 not available in ERV Literature No. 1773212 Dimensions are shown for Dimensions are in Specifications subject to tycoelectronics.com Issued: 11-08 reference purposes only. millimetres unless change. passives.tycoelectronics.com otherwise specified.
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 1-1623749-0?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Related Products
Res Thin Film 4.7M Ohm 0.25% 1W ±100PPM/°C AXL Thru-Hole 1-1613079-0
Res Thin Film 4.7M Ohm 1% 1W ±50ppm/C Conformal Coated AXL Bandoliered 1-1613079-1
Res Metal Film 100K Ohm 1% 0.5W(1/2W) ??15ppm/??C Conformal Coated AXL Bandoliered 1-1613127-0
Res Metal Film 100K Ohm 0.05% 0.5W(1/2W) ??15ppm/??C Conformal Coated AXL Bandoliered 1-1613127-1
Res Metal Film 100K Ohm 0.1% 0.5W(1/2W) ±100ppm/C Conformal Coated AXL Bandoliered 1-1613127-2
Res Metal Film 100K Ohm 1% 0.5W(1/2W) ??100ppm/??C Conformal Coated AXL Bandoliered 1-1613127-3
Request a Quote
The quote request has been received
Close
Facing challenges or have inquiries? Feel free to contact us!
Call Us +1-469-283-2440
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods