SMD Professional Trimmers Type 3315 Series Type 3315 Series Characteristics - Electrical Resistance Range: 10R to 2M 1, 2, 5 in each decade Resistance Tolerance: ±20% Power Rating: 0.25W at 70°C, derating to 0 at 125°C Resolution: Essentially infinite Input Voltage: 200V dc or Power Rating, whichever is smaller Wiper Current: 100mA Electrical Angle: 210° End Resistance: 1% or 2 ohms, whichever is greater Contact Resistance Variation: 1% or 3 ohms, whichever is greater This component is an ideal choice for Insulation Resistance: 500 V DC 1000M minimum applications when miniaturisation is Dielectric Strength: 500V AC 1 minute essential. With a very small outline package (5.0 x 4.5 x 2.3mm), it is designed specifically for pick and Characteristics - place equipment. This is probably the Mechanical ultimate in a sealed miniature potentiometer eminently suited to Mechanical Angle: 240° surface mounting and hybrid systems. Operating Torque: 10mNm Special radial O ring seals and state Stop Strength: 30mNm of the art materials permit circuit Weight: 3315/3316 - 0.12 grams ~ 3317 – 0.22 grams adjustments and re-adjustments even Terminals: Solder Plated Copper Alloy after wave soldering. The 3315 is designed to withstand temperatures up to 300°C hence providing unparalleled Characteristics - safety margins, regardless of the Environmental SMD process. ITEM TEST CONDITIONS ∆R/R Operating Temperature: -55°C - +125°C - Key Features Temperature Coefficient: 100ppm/°C maximum 100R to 2M - � Supplied on STD EIA 250ppm/°C maximum 10R to 50R Embossed Tape Thermal Shock: -65°C - 125°C, 5 cycles (0.5 hrs) ≤ ±2% � Small Versatile Size Humidity: -10°C to +65°C 80 - 90% RH, ≤ ±2% 10 cycles, 240 hours. � Sealed with an O-Ring Shock: 100G, 6 directions, 3 times ≤ ±1% � Suitable for Dip and Reflow Vibration: 20G, 10 - 2000 Hz, 12 times. ≤ ±1% Soldering Soldering Heat: 260°C 10 secs / 215°C - 35 secs. ≤ ±1% � Ideal for Automatic Load Life: 70°C, rated power, 1000 hours. ≤ ±3% Placement Low Temperature Operation: -55°C, 2 hours. ≤ ±2% � Side Adjust Version Available High temperature Operation: 125°C, 250 hours. ≤ ±3% � 0.25W at 70°C Rotational Life: 100 cycles ≤ ± (2 ohm+ 3%) Seal Test: 85°C 1 minute No Leaks � Available in J Hook and Gull Wing Styles ∆R/R: Change in total resistance Derating Curve 100 80 60 40 20 0 0 20 40 60 70 80 100 120 140 Ambient Temperature (°C) When the ambient temperature exceeds 70°C, reduce the rated power and current in accordance with the derating curve shown Literature No. 1773138 Dimensions are shown for Dimensions are in millimetres Specifications subject to www.tycoelectronics.com Issued: 08-05 reference purposes only. unless otherwise specified. change. passives.tycoelectronics.com Rated Power (%) SMD Professional Trimmers Type 3315 Series Dimensions - 3315 3316 3317 Cleaning Conditions After soldering use cleaning solvents such as water or alcohol but not solvents containing CFC’s. It is recommended the component be less than 30°C prior to cleaning. Depending on flux to be applied, markings may, though a rare case, disappear or fade out at soldering. Please make sure before its use. Storage To prevent damage to the electrode, be sure to observe the following conditions for storage. Store in 25°C maximum ambient temperature, and 75% maximum ambient RH. For maximum possible shelf life do not disturb polythene sleeve until you are ready to use potentiometers. Recommend use within one year of delivery. Store where there are no harmful gasses containing sulphur or chlorine. Do not agree expose to direct sunlight or dust. How to Order 3315 X 104 M Common Part Orientation Resistance Value Tolerance The first two digits are 3315 - J Lead Termination significant figures of resistance value and the X - Terminals 1 and 3 3316 - Gull Wing third denotes the number away from the M - 20 % Termination of zeros following. sprocket holes 3317 - Side Adjust e.g. 100R: 101 1K: 102 10K: 103 100K: 104 Literature No. 1773138 Dimensions are shown for Dimensions are in millimetres Specifications subject to www.tycoelectronics.com Issued: 08-05 reference purposes only. unless otherwise specified. change. passives.tycoelectronics.com