Moulded Chip Inductor 18:12 Type 3613C Series Type 3613C Series Characteristics - Style Opening Nominal Value Inductance Self Resonant DC Allowance Measuring Q Inductance Coding Tolerance Frequency Resistance DC Frequency (min) (µH) Marking (±%) (MHz) (min) (ohms max) (mA) (MHz) 0.10 R10M ±20% 35 300 0.18 800 25.2 0.12 R12M ±20% 35 280 0.20 770 25.2 0.15 R15M ±20% 35 250 0.22 730 25.2 0.18 R18M ±20% 35 220 0.24 700 25.2 0.22 R22M ±20% 40 200 0.25 665 25.2 0.27 R27M ±20% 40 180 0.26 635 25.2 0.33 R33M ±20% 40 165 0.28 605 25.2 Specially developed for automatic 0.39 R39M ±20% 40 150 0.30 575 25.2 mounting applications, this exciting 0.47 R47M ±20% 40 145 0.32 545 25.2 range of chip inductors are ferrite 0.56 R56M ±20% 40 140 0.36 520 25.2 based and sealed in a thermoset 0.68 R68M ±20% 40 135 0.40 500 25.2 plastic body. They employ solder 0.82 R82M ±20% 40 130 0.45 475 25.2 coated copper terminations with 1.0 1R0K ±10% 50 100 0.50 450 7.96 barrier layer. Customers can therefore 1.2 1R2K ±10% 50 80 0.55 430 7.96 expect consistent quality, performance 1.5 1R5K ±10% 50 70 0.60 410 7.96 and reliability. Its smooth top surface 1.8 1R8K ±10% 50 60 0.65 390 7.96 makes it particularly well suited to pick 2.2 2R2K ±10% 50 55 0.70 380 7.96 and place equipments. 2.7 2R7K ±10% 50 50 0.75 370 7.96 3.3 3R3K ±10% 50 45 0.80 355 7.96 Truly the last word in 1812 chip 3.9 3R9K ±10% 50 40 0.90 330 7.96 inductors. 4.7 4R7K ±10% 50 35 1.00 315 7.96 5.6 5R6K ±10% 50 33 1.10 300 7.96 Key Features 6.8 6R8K ±10% 50 27 1.20 285 7.96 8.2 8R2K ±10% 50 25 1.40 270 7.96 � High Reliability 10.0 100K ±10% 50 20 1.60 250 2.52 � Small Versatile Size - 12.0 120K ±10% 50 18 2.00 225 2.52 3.2 x 4.5 mm 15.0 150K ±10% 50 17 2.50 200 2.52 � Temperature Range 18.0 180K ±10% 50 15 2.80 190 2.52 -30°C to +100°C 22.0 22OK ±10% 50 13 3.20 180 2.52 � Supplied in Standard 27.0 270K ±10% 50 12 3.60 170 2.52 Carrier Tape 33.0 330K ±10% 50 11 4.00 160 2.52 39.0 390K ±10% 50 10 4.50 150 2.52 � Suitable for Dip and Wave 47.0 470K ±10% 50 10 5.00 140 2.52 Solder 56.0 560K ±10% 50 9.0 5.50 135 2.52 � Insulation 1000M R min 68.0 680K ±10% 50 9.0 6.00 130 2.52 � Available from Stock 82.0 820K ±10% 50 8.0 7.00 120 2.52 100 101K ±10% 40 8.0 8.00 110 0.796 120 121K ±10% 40 6.0 8.00 110 0.796 150 151K ±10% 40 5.0 9.00 105 0.796 180 181K ±10% 40 5.0 9.50 102 0.796 220 221K ±10% 40 4.0 10.0 100 0.796 270 271K ±10% 40 4.0 12.0 92 0.796 330 331K ±10% 40 3.5 14.0 85 0.796 390 391K ±10% 40 3.0 18.0 80 0.796 470 471K ±10% 40 3.0 26.0 62 0.796 560 561K ±10% 30 3.0 30.0 50 0.796 680 681K ±10% 30 3.0 30.0 50 0.796 820 821K ±10% 30 2.5 35.0 30 0.796 1000 102K ±10% 20 2.5 40.0 30 0.252 5% Tolerance available on selected value ranges. Please enquire Characteristics - Environmental Insulation: 1000 M ohms Temperature Range: -30°C to +100°C Humidity Load life: ∆L/L within ±10% Vibration (see test method): ∆L/L within ±5% Literature No. 1773143 Dimensions are shown for Dimensions are in millimetres Specifications subject to www.tycoelectronics.com Issued: 01-07 reference purposes only. unless otherwise specified. change. passives.tycoelectronics.com Moulded Chip Inductor 18:12 Type 3613C Series Dimensions Test Methods Item Standard Test Method DC Superposition ∆L/L Within -10% When the allowable current was applied, the inductance was measured Characteristics with a YHP 4262A and compared with the initial value. Temperature Within 20°C When the allowable current was applied, the amount of temperature rise Rise was measured by the change in resistance. Temperature ∆L/L Within ± 5% Measurements were taken in a temperature range of -25°C to 85°C and Rise the value at +20°C was used as the standard value. Overcurrent No smoke and no fire Twice the allowable current was applied for a period of five minutes. Test Insulation Not less than 1000 M 0.3mm diameter copper wires were wound around the coils three times and Resistance measurements were taken after 250VDC was applied between the wire and the terminals for a period of 1 minute. Tensile No separation from substrate After the inductors were soldered to substrates, a force of 1.0kg was applied in both Strength Test the x and y directions for a period of 5 seconds. Stress Test No breakage After the inductors were mounted on substrates, 1-mins. 10-55-10 cycle per seconds sweeps 1.5mm stroke vibrations were applied for 2 hrs. each in the X, Y and Z directions. Drop Test No pronounced abnormality in The inductors were dropped 10 times from a height of 1.0 metre onto a concrete floor. appearance Vibration Test ∆L/L Within ± 10% After the inductors were mounted on substrates, 1-mins. 10-55-10 cycle per seconds Q Not less than 30 sweeps 1.5mm stroke vibrations were applied for 2 hours each in the X, Y and Z directions Humidity Resistance ∆L/L Within ± 10% Measurements were taken after the allowable current was applied while the inductors Load Test Q Not less than 30 were stored at 60°C ± 2°C in 90 to 95% RH for a period of 500 hours. Low Temperature ∆L/L Within ± 10% Measurements were taken after the inductors were stored at -40°C ± 2°C for period Resistance Test Q Not less than 30 1000 hours Temperature ∆L/L Within ± 10% Measurements were taken after the inductors were stored for 30 minutes, during which Cycle Test Q Not less than 30 they were subjected to 20 temperature cycles of between -25°C and +85°C. High Temperature ∆L/L Within ± 10% Measurements were taken after the allowable was applied while the inductors were stored Resistance Load Test Q Not less than 30 at 85°C for a period of 1000 hours. Test Notes The measuring method for the test data given overpage are as follows: Inductance: Direct reading from Q-meter (equivalent to YHP 4342A, jig used) Q: Direct reading from Q-meter (equivalent to YHP 4342A, jig used) Self resonant frequency: Grid Dipo Meter (equivalent to Measurement M159) DC resistance: Wheatstone bridge (equivalent to YEW 2755) Unless otherwise specified, the temperature is 20°C ± 5°C and the humidity is 65% ± 20% How to Order 3613C 1R5 K Common Part Inductance Tolerance J - ±5% 3613C - 18:12 Value Code K - ±10% Inductor (see table) M - 20% Literature No. 1773143 Dimensions are shown for Dimensions are in millimetres Specifications subject to www.tycoelectronics.com Issued: 01-07 reference purposes only. unless otherwise specified. change. passives.tycoelectronics.com