Spindle Operated Potentiometers (9mm) Type PC610 Series Type PC610 Series Characteristics - Electrical Resistance Range: 500 Ohms to 500K Ohms Resistance Values: 1,2 and 5 in each decade Resistance Laws available: Linear and Non Linear Resistance Tolerance: ± 20% End Resistance: 2% Nominal Slider Current: 50mA Power Rating, Watts: 0.05W Maximum Working Voltage: 20Vdc or ac RMS, Max. Insulation Resistance: 100 M Ohms Min at 250 Vdc Tyco specification in polymer technolo- Rotational Noise (CRV): 20 Ohms or 3% whichever is greater gy gives this small single turn Temperature Coefficient: 5% potentiometer stability, reliability and Characteristics - long life. For use in industrial Mechanical and consumer applications, this component offers durability and quality End Stop: 20mNm performance and is available with top Rotational Torque: 1 - 15mNm or side mounting versions with Mechanical Adjustment: 1 Turn - 280° ±10° alternative shafts. Soldering: 300°C (maximum 3 seconds) The PC610 is an ideal component in Weight: 3 grams approximate. toys, games, computer brightness and contrast and most suited to similar Characteristics - large volume applications where the Environmental completely automated manufacture Temperature Range: -20°C to 70°C allows attractive prices to be achieved. Temperature Storage: 1000 Hrs at 70°C The PC610 is often used without a Bump Severity: 4000 Bumps; 20G control knob with the splined tip Vibration Severity: 10 - 500Hz; 10G protruding from the facia. Rotational Life: 5,000 Operations minimum The PC610 is available with or without Load Life at 50°C: ∆R < +10% -15% after 500 hours centre detent. Key Features Dimensions PC610H � Stable High Resolution Element � Space Saving Size (Only 9.5mm Wide) � Offered in Linear and Non-Linear Laws � Vertical or Horizontal Mounting PC610V � Choice of Shaft Style � PCB Standoffs � Simple One Piece Style 3.2 How to Order PC610 H 104 B M 20 Common Part Orientation Resistance Law Shaft Style Shaft Length Resistance Value PC610 - No Detent The first two digits are F - Flatted (S)20 - 20mm Serrated H - 10mm Mounting significant figures of Height Shaft parallel PC611 - With K - Knurled (S)30 - 30mm Serrated resistance value and to PCB Detent A - Linear the third denotes the M - Pointer (S)35 - 35mm Serrated HA - 12.5mm PC612 - Special number of zeros B - Log Mounting Height Mounting Height following. N - Plain (F)15 - 15mm Flatted Shaft parallel to PCB C - Inverse Log (6.5mm) e.g. 1K: 102 P - Phillips Slot (P)15 - 15mm Slotted V - Shaft at 90° to 5K: 502 PCB S - Serrated (K)30 - 30mm Knurled 100K: 104 Literature No. 1773262 Dimensions are shown for Dimensions are in millimetres Specifications subject to www.tycoelectronics.com Issued: 10-06 reference purposes only. unless otherwise specified. change. passives.tycoelectronics.com