General Purpose High Power PCB Relays OEG T9C Series, AC Coil Power Relay n 30A, 1NO, 20A/10A 1CO n Flange mount n 1.6VA coil (cULus recognized) n 1.2VA coil (VDE approved) n 2.5kV coil - contact dielectric Typical applications HVAC, power supplies, domestic appliances, measurement and controls. Code E (1.2VA) coil Approvals 12 12 50/60 9.6 1.2 52 1.2 UL E58304; CSA LR48471; VDE REG,-Nr.A876 24 24 50/60 19.2 2.4 198 1.2 Technical data of approved types on request. 48 48 50/60 38.4 4.8 824 1.2 120 110/120 50/60 96 12 3728 1.2 Contact Data 240 240/240 50/60 192 24 14810 1.2 Contact arrangement 1 form A (NO), 1 form B (NC), 1 form C (CO) All figures are given for coil without preenergization, at ambient temperature +23°C. Rated voltage 250VAC Max. switching voltage 277VAC Insulation Data Rated current 30A (NO), 10A (NC), 20A/10A (CO) Initial dielectric strength Breaking capacity max. 7500VA between open contacts 1500V rms Contact material AgSnOInO, AgCdO between contact and coil 2500V rms Min. recommended contact load 1A, 5VDC or 12VAC Initial insulation resistance Initial contact resistance 75 mΩ at 1A at 5VDC or 12VAC 9 between insulated elements 1x10 Ω Frequency of operation, with/without load 6/300min Clearance/creepage Operate/release time max., including bounce 15/15ms between contact and coil 3.1 / 6.3mm (UL508) Tracking index of relay base 175 Contact ratings Type Load Cycles Other Data UL508 Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content AgCdO refer to the Product Compliance Support Center at 3 NO 30A, 125VAC, resistive 100x10 www.te.com/customersupport/rohssupportcenter 3 NO 20A, 28VDC, resistive 100x10 Ambient temperature NO 1hp, 277VAC 6,000 AC coil -40ºC to 85ºC 3 CO 30A(NO)/15A(NC), 125VAC, general purpose 100x10 Category of environmental protection 3 CO 10A(NO)/10A(NC), 240VAC, general purpose 100x10 IEC 61810 RTI - dust protected CO 30A(NO)/20A(NC), 240VAC, resistive 6,000 Vibration resistance (functional) 1.5mm, 10-55 Hz NC 20A, 240VAC, resistive 6,000 Shock resistance (functional) 10g for 11msec Shock resistance (destructive) 100g AgSnOInO Terminal type quick connect 3 NO 30A, 250VAC, resistive 30x10 Weight 33g 3 NO 15A, 240VAC, general purpose 100x10 Resistance to soldering heat THT NO 1hp, 120VAC 6,000 IEC 60068-2-20 250°C CO 20A(NO)/10A(NC), 250VAC, resistive 6,000 NC 1/2hp, 240VAC 6,000 Packaging/unit 250 pcs Dimensions IEC 61810 3 NO 15A, 277VAC, cos =1, 85°C 100x10 6 Mechanical endurance 5x10 ops. Coil Data Coil voltage range 12 to 240VAC Max. coil power Coil A, 1.6VA Coil E, 1.2VA Coil insulation system according UL Class F Coil versions, AC coil Coil Rated Frequency Operate Release Coil Rated coil code voltage voltage voltage resistance power VAC HZ VAC, 60HZ VAC, 60HZ Ω±10% VA Code A (1.6VA) coil 12 12 50/60 9.6 1.2 36 1.6 24 24 50/60 19.2 2.4 136 1.6 48 48 50/60 38.4 4.8 548 1.6 120 110/120 50/60 96 12 2800 1.6 240 220/240 50/60 192 24 11500 1.6 277 250/277 50/60 221.6 27.7 15625 1.6 1 03-2018, Rev. 0318 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2014 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions General Purpose High Power PCB Relays OEG OEG T9C Series, AC Coil Power Relay (Continued) Terminal assignment 1 form A 1 form B 1 form C Product code structure Typical product code T9C P 1 A 5 4 -24 Type T9C Power Relay T9C AC coil Enclosure P Dust protected (flange mount) Contact arrangement 1 1 form A (1 NO); 2 1 form B (1 NC) 5 1 form C (1 CO); Coil input A AC voltage, 1.6VA E AC voltage, 1.2VA Mounting and termination 5 Flanged mounting; 4.75 mm (.187) QC for coil and 6.35mm (.250in) QC for contacts Contact material 2 AgCdO 4 AgSnOInO Coil voltage Coil code: please refer to coil versions table Product Code Contact arrangement Contact material Coil voltage Part Number T9CP1A52-12 1 form A (NO) AgCdO 12 VAC 1649341-3 T9CP1A52-24 24 VAC 1649341-1 T9CP1A52-48 48 VAC 1649341-4 T9CP1A52-120 120 VAC 1649341-5 T9CP1A52-240 240 VAC 1649341-6 T9CP5A52-12 1 form C (CO) 12 VAC 1-1649341-1 T9CP5A52-24 24 VAC 1-1649341-2 T9CP5A52-48 48 VAC 1-1649341-3 T9CP5A52-120 120 VAC 1-1649341-4 T9CP5A52-240 240 VAC 1-1649341-5 T9CP1A54-12 1 form A (NO) AgSnInO 12 VAC 1649341-7 T9CP1A54-24 24 VAC 1649341-8 T9CP1A54-48 48 VAC 1649341-9 T9CP1A54-120 120 VAC 1-1649341-0 T9CP1A54-240 240 VAC 1649341-2 T9CP2A54-120 1 form B (NC) 120 VAC 2-1649341-5 T9CP2A54-240 240 VAC 2-1649341-4 T9CP5A54-12 1 form C (CO) 12 VAC 1-1649341-6 T9CP5A54-24 24 VAC 1-1649341-7 T9CP5A54-48 48 VAC 1-1649341-8 T9CP5A54-120 120 VAC 1-1649341-9 T9CP5A54-208 208 VAC 2-1649341-6 T9CP5A54-240 240 VAC 2-1649341-0 T9CP5A54-277 277 VAC 2-1649341-7 Note. This list represents the most common types and does not show all variants covered by this datasheet, other types on request. 2 03-2018, Rev. 0318 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section, www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are © 2014 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions