TE CONNECTIVITY 1-413985-0

RF Coax Connectors SMB Connectors SMB Connectors are avail- Product Facts able in commercial and ■ SMB offers snap-fit coupling high rel versions. They are for quick connect/disconnect ideally suited for circuit ■ Choice of Commercial or miniaturization and are High Rel Connectors offered in a wide range of configurations including ■ 50 and 75 Ω MIL-Type plugs, right-angle plugs, connectors available jacks, bulkhead jacks and ■ Straight plugs and jacks are adapters, as well as printed completely crimp terminated circuit board and solder jacks. ■ Fast easy cable assembly Termination costs are kept ■ Low VSWR to a minimum using plugs ■ Standard military, commer- and jacks with a crimp cen- cial or Tyco Electronics ter contact and hex crimp tooling outer braid. Both hand held ■ Listed under the Component tooling and pneumatic Program of Underwriters bench-mounted tooling is Laboratories Inc., available. Easily assembled R File No. E81956 right-angle plugs have a hex crimp on the outer ■ PC Board soldered connec- braid ferrule and bifurcated tors are recognized under solder center contacts. the Component Program of Underwriters Tyco Electronics’ 75 Ohm BT R Laboratories Inc., 43 SMB Connectors feature File No. E81956 unique spring mating with snap-fit couplings for quick ■ Certified by Canadian connect/disconnect. These Standards R connectors are designed Association to be intermateable with File No. LR 7189 75 Ohm SMB MIL-C-39012 connectors. They also fea- ture reliable dual crimp cable terminations. Packaging — All connectors are packaged individually unless otherwise noted under the “Military No. and/or Comments” column in the connector specifications chart. Between Series Adapters For SMB Between Series Adapters, please see pages 251-260. 176 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connector Specifications Electrical Characteristics Environmental Characteristics Impedance — 50 ohms and 75 ohms, nominal Temperature Rating — –65°C to +165°C Frequency Range — 0 to 4.0 GHz Corrosion (salt spray) — MIL-STD-202, Method 101, test condition B, 5% salt solution Voltage Rating (VRMS) — Sea Level 70,000 Feet Vibration High Frequency — MIL-STD-202, Method 204, test condition B 50 ohm connectors for RG 178/U series cable 300 75 (15 G’s) 50 ohm connectors for RG 316/U series cable 400 100 1 75 ohm connectors for RG 179/U series cable 300 75 Shock — MIL-STD-202, Method 213, test condition B, 75 G’s at 6 milliseconds, ⁄ 2 75 ohm connectors for RG 195/U series cable 500 125 sine Insulations Resistance — 1000 megohms min. Thermal Shock — MIL-STD-202, Method 107, test condition B, except high tem- perature shall be +85°C. High temperature shall be +200°C for connectors using Contact Resistance — (milliohms max.) After 200°C cables. Initial Environment Moisture Resistance — MIL-STD-202, Method 106, when interface gasket is Center contact 6.0 8.0 used. No measurements of high humidity. Insulation resistance shall be 200 Outer contact 1.0 1.5 megohms minimum within five minutes after removal from humidity. Braid to body 1.0 N/A Durability Test — Conducted per MIL-C-39012 Reg. Para. 3.15, Method Para. 4.6.12 Contact Current Rating — 1.5 amps DC max. Voltage Standing Wave Ratio (VSWR0 — to 4.0 GHz or 80% of upper cutoff frequency of the cable, whichever is lower. Materials Body, Body Components and Male Contacts — Brass, half hard, per QQ-B-626, Alloy 360, Zinc per QQ-Z-363 Mating Engagement Cable Female Contacts — Beryllium copper per QQ-C-530, heat treated per MIL-H-7199 Straight Right-Angle Insulators — TFE fluorocarbon per ASTM D 1710, Type 1, Grade 1 RG 178/U Series 1.30 + .04F 1.45 + .06F Lockwashers — Phosphor bronze per QQ-B-750 RG 316/U Series 1.25 + .04F 1.35 + .04F Crimp Ferrule — Annealed copper alloy per WW-T-799 F=GHz, does not apply to 75 ohm connectors. Gaskets — Silicone rubber per ZZ-R-765, Class 11B, Grade 65-75 RF High Potential Withstanding Voltage Plating Frequency — 5 MHZ Center Contacts — 0.00127 [.000050] min. Gold per MIL-G-452048 Type 1, Leakage Current — N/A Grade C, Class 1, over 0.00254 [.000100] min. nickel per QQ-N-290 50 ohm connectors for RG 178/U series cable 675 VRMS Other Metal Parts — Gold, Nickel or Solder plated to meet the Finish and 50 ohm connectors for RG 316/U series cable 950 VRMS Corrosion requirements of MIL-C-39012 75 ohm connectors for RG 179/U series cable 950 VRMS 75 ohm connectors for RG 195/U series cable 1225 VRMS RF Leakage — –55 dB min. at 2-3 GHz Insertion Loss — .30dB max. at 3 GHz Mechanical Characteristics Engagement Forces — 14 lbs. [62.3 N] maximum engagement initially. After 500 matings, 14 lbs. [62.3 N] maximum engagement and 2 lbs. [8.8 N] minimum disengagement for all of SMBs. Cable Attachment — Straight Connectors — Crimp, both center contact and braid Right-Angle Connectors — Crimp on braid and bifurcated solder center contact Durability — 500 cycles per MIL-C-39012 Contact Captivation — When captivated, the contacts will withstand 4.0 lbs. minimum axial force. Cable Retention — When properly assembled to the compatible braided coaxial cable, the retention is equal to the breaking strength of the cable. Marking — Per MIL-STD-130 177 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 50 Ohm Straight Plugs 6.35 Max. [.250] 21.10 Max. [.830] Center Outer Other RG/U Part Contact Contact Metal Parts Dielectric Style Cable No. Plating Plating Plating 178, 178A, 178B, Gold Gold Nickel PTFE MIL Type 413985-6 196, 196A Gold Gold Gold PTFE MIL Type 413985-1 Gold Gold Nickel PTFE MIL Type 413985-3 174, 316, Gold Nickel Nickel PTFE MIL Type 413985-7 188, 188A Gold Gold Nickel PTFE Die Cast 414946-1 Gold Nickel Nickel PTFE Die Cast 5414946-2 Gold Gold Nickel PTFE MIL Type 1-413985-1 179, 179A, 179B, 161, 187, 187A, Gold Gold Nickel PTFE Die Cast 5414946-5 BELDEN 9221 Gold Nickel Nickel PTFE Die Cast 5414946-6 Gold Gold Gold PTFE MIL Type 413985-2 Gold Gold Nickel PTFE MIL Type 413985-4 RG 316, 188 Double Braid Gold Gold Nickel PTFE Die Cast 5414946-3 Gold Nickel Nickel PTFE MIL Type 413985-8 MIL Type Die Cast Right-Angle Plugs 13.71 Max. 13.71 [.540] [.540] Max. 6.35 Dia. [.250] 13.21 Max. [.520] 6.35 Dia. [.250] 13.21 [.520] Max. Center Outer Other RG/U Part Contact Contact Metal Parts Dielectric Style Cable No. Plating Plating Plating Gold Gold Gold PTFE MIL Type 414002-7 178, 178A, 178B, Gold Gold Nickel PTFE MIL Type 414002-8 196, 196A Gold Gold Nickel PTFE Die Cast 5414363-8 Gold Gold Gold PTFE MIL Type 414002-1 Gold Gold Nickel PTFE MIL Type 414002-3 174, 316, 188, 188A 179, 179A, 179B Gold Nickel Nickel PTFE MIL Type 414002-5 161, 187, 187A Gold Gold Nickel PTFE Die Cast 5414363-3 BELDEN 9221 Gold Nickel Nickel PTFE Die Cast 5414363-5 Gold Gold Gold PTFE MIL Type 414002-2 RG 316, Gold Gold Nickel PTFE MIL Type 414002-4 188 Double Braid Gold Gold Nickel PTFE Die Cast 5414363-4 BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 178 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 50 Ohm (Continued) Commercial Jack MIL Type Jack Straight Jacks 5.56 Hex. [.219] 25.40 [1.000] Die Cast Brass Center RG/U Body Jack Contact Dielectric Style Cable Plating Part No. Plating 178, 178A, 178B, 196, 196A Gold Nickel PTFE MIL Type 5414170-2 Gold Nickel PTFE MIL Type 5414170-1 174, 316, 188, 188A Gold Nickel PTFE Die Cast 414948-1 RD 316, 188 Double Braid Gold Nickel PTFE Commercial 414948-3 Bulkhead Jacks 6.35 Hex. [.250 ] 5/4.88 Dia. [.197/.192] 28.60 [1.120] Center Bulkhead RG/U Body Contact Dielectric Style Jack. Cable Plating Plating Part No. Gold Nickel PTFE Commercial 5415006-1 174, 316, 2.08/2.01 188,188A Gold Nickel PTFE Commercial 5228217-1 [.082/.079] RD 316, 188 Double Braid Gold Nickel PTFE Commercial 5415006-2 Maximum Panel Thickness 2.36 [.093] Recommended Panel Cutout for Bulkhead Jack and Adapter Bulkhead Jack Adapter (Jack-Jack) 6.35 Hex. [.250] 17.53 Max. [.690] Center Body Type Contact Dielectric Style Part No. Plating Plating Gold Nickel PTFE MIL Type 228553-1 Jack-To-Jack Gold Gold PTFE MIL Type 228553-2 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 179 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 50 Ohm (Continued) PC Board Vertical Jacks 5.08 [.200] Ş 1.60 2.54 [.063] [.100] 4 Plcs. A 5.08 [.200] Ş 1.19 [.047] B Recommended PC Board Layout Jacks Center Body Dim. Dim. Part Type Contact Dielectric Style Plating A B No. Plating 7.62 3.94 –– Gold Gold PTFE MIL Type 413990-1 .300 .155 7.62 3.94 –– Gold Nickel PTFE MIL Type 413990-2 .300 .155 10.16 2.54 –– Gold Nickel PTFE MIL Type 414612-2 .400 .100 3.94 Brass, 8.25 –– Gold Tin Max. PTFE 5221111-1 .155 Stamped .325 PC Board Vertical Plugs ± 0.20 11.53 ± .008 [.454 ] 6.35 ± 0.13 6.32 3.94 [.250] ± .005 [.249] [.155 ] Sq. ± 0.05 5.08 Ş 1.60 2.54 4 Plcs. 0.64 ± .002 [.200 ] [.063] [.100] A [.025] B ± 0.05 1.02 Typ. Ş 6.35 5.08 ± .002 [.040 ] [.250] Ş 1.19 [.200] [.047] ± 0.03 Ş 0.97 ± .001 [.038 ] Recommended 1.42 Typ. [.056] PC Board Layout Plugs Center Recommended Body Dim. Dim. Part Type Contact Dielectric PC Board Style Plating A B No. Plating Layout Low Profile (Plug) 3.94 7.62 Gold Nickel PTFE B MIL Type 415774-1 Mated Pair .155 300 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 180 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 50 Ohm (Continued) PC Board, Right-Angle Jacks Jack Low Profile Jack with Standoff Pads Bulkhead Jack 12.70 13.46 19.87 A [.500] [.530] A [.782] A B B B Jacks Center Interface PCB Recommended Dim. Dim. Part Type Contact Body Leg Dielectric Style PC Board AB No. Plating Plating Plating Layout 7.11 3.94 PTFE Gold Gold Gold MIL Type A 413996-2 .280 .155 7.11 3.94 PTFE Gold Nickel Nickel MIL Type A 413996-4 .280 .155 Low Profile 7.11 2.79 PTFE Gold Gold Gold Die Cast A 415340-1 .280 .110 8.76 2.79 PTFE Gold Gold Gold Die Cast A 415672-1 .345 .110 8.51 3.94 PTFE Gold Gold Gold MIL Type A 414026-2 .335 .155 8.76 3.94 PTFE Gold Nickel Nickel MIL Type A 414026-3 .345 .155 With 8.76 3.94 PTFE Gold Nickel Tin-Lead Die Cast A 5414337-1 Standoff Pads .345 .155 8.76 2.79 PTFE Gold Nickel Nickel Die Cast B 5415379-1* .345 .110 8.51 3.94 PTFE Gold Nickel Nickel Die Cast A 415381-1� .335 .155 7.67 2.79 PTFE Bulkhead Gold Gold Gold Die Cast A 414963-1 .302 .110 9.78 3.94 Brass, Commercial Gold Nickel Tin Polypropylene C 5228435-1 .385 .155 Stamped 7.67 2.79 PTFE Bulkhead Gold Gold Gold Die Cast A 1274330-1 .302 .110 * 5 leg design 5.08 PC Board, [.200] 5.08 5.08 Right-Angle Plug Ş 1.75 [.200] [.200] 2.54 2.54 Ş 1.32 2.54 [.069] [.100] [.100] [.100] [.052] 4 Plcs. 1.75 Dia. 5 Plcs. [.069] Min. 13.46 (4 Holes) A [.530] 5.08 5.08 5.08 [.200] 1.24 Dia. [.200] [.200] ± 0.05 Ş 1.24 [.049] Min. ± .002 [.049 ] A B C B 6.35 Dia. Recommended [.250] PC Board Layouts Plugs Center Interface PCB Recommended Dim. Dim. Part Contact Body Leg Dielectric Style PC Board AB No. Plating Plating Plating Layout 8.76 2.79 Gold Nickel Nickel PTFE Die Cast B 415380-1* .345 .110 8.76 3.94 Gold Nickel Tin PTFE Die Cast A 5414338-1 .345 .155 * 5 leg design Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 181 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 50 Ohm (Continued) Bulkhead PC Board Jack, Solder Receptacle Kits 5/4.88 [.197/.192] Dia. 6.35 3.71 Hex. [.250] [.146] 2.08/2.01 [.082/.079] 16.0 Maximum Panel Thickness 2.36 [.093] Max. [.630] Recommended Panel Cutout Kit Includes Lockwasher Center Kit and Jam Nut Body Type Contact Dielectric Style Part Plating Plating No. Front Mount Gold Nickel PTFE MIL Type 228216-1* Lockwasher and Jam Nut Rear Mount Gold Nickel PTFE MIL Type 228215-1* *includes Jam Nut and Lockwasher Part No. Part No. 415001-2 414969-2 SMB Receptacle Jack 4.45 6.99 [.175] [.275] 1.02 2.92 [.040] 3.18 [.115] [.125] 3.45 [.136] 3.68 Ref. Plane Dia. [.145] 6.35 ± 0.13 0.97 Hex Dia. [.250] ± .001 [.038 ] 10-32 UNEF-2A Center Body Type Contact Dielectric Style Part No. Plating Plating Front Mount Gold Nickel PTFE MIL Type 414895-1 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 182 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, Mini 75 Ohm Mini 75 ohm SMB connec- Product Facts tors are ideally suited for ■ Industry standard for minia- circuit miniaturization in ture 75 ohm SMB communication, broadband ■ SMB offers snap-fit and switching equipment coupling for quick as well as a variety of other connect/disconnect applications. ■ Suitable for high density They offer the same low applications consistent mating/unmating force as Tyco Electronics ■ Fast easy cable assembly standard SMB products and ■ Low VSWR therefore, outer contact resistance values are main- ■ Connectors offer consistent tained from connector to mating and unmating forces connector. ■ Straight plugs and jacks are Standard military, commer- completely crimp termi- cial or Tyco Electronics tool- nated ing can be used to ■ Low cost terminate these products. Electrical Characteristics Cost effective assembly of Impedance — 75 ohms the straight plugs is com- Frequency Range — 0 to 4.0 GHz pleted with a crimp center Insulation Resistance — 1000 megohms contact and hex crimp on Contact Current Rating — 1.5 amps DC max. the outer braid. Right-angle plugs have a hex crimp on Mechanical Characteristics the outer braid ferrule and Engagement Forces — Initial—14.0 lbs. [62.3 N] maximum engagement. bifurcated solder center After 500 matings, 14.0 lbs. [62.3 N] maximum engagement. contacts. Durability—500 cycles Environmental Characteristics Temperature Rating — -65°C to +165°C 183 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, Mini 75 Ohm (Continued) Straight Plug Ş 1.73 [.068] Ş 6.35 [.250] Ş 2.64 [.104] 17.78 Ref. [.700] Center Contact Outer Contact Body RG Cable Part No. Plating Plating Plating 179, 187 Gold Gold Nickel 5415487-1 179, 187 Gold Nickel Nickel 5415487-2 RD 179 Gold Nickel Nickel 5415487-3 Right-Angle Plug 13.7 Max. [.539] 10.21 Ref. [.402] Ş 6.35 [.250] ± 0.25 16.0 9.78 Ref. ± .010 [.630] [.385 ] Center Contact Outer Contact Body RG Cable Part No. Plating Plating Plating 179, 187 Gold Nickel Nickel 5415484-1 179, 187 Gold Gold Nickel 5415484-2 RD 179 Gold Gold Nickel 5415484-3 Bulkhead Jack 22.86 Max. [.900] ± 0.05 Ş 3.66 ± .002 [.144 ] Ş 5.03 [.198] 4.52 [.178] Recommended PC Board Layout 9.7 10.92 [0.38] [.430] 6.35 Hex. [.250] Center Contact Body RG Cable Part No. Plating Plating 179, 187 Gold Nickel 415500-1 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 184 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, Mini 75 Ohm (Continued) ± 0.08 5.08 ± 0.18 ± .003 Vertical PC Board Jacks 7.62 [.200 ] ± 0.08 2.54 ± .007 [.300 ] ± .003 [.100 ] ± 0.08 Ş 0.71 ± .003 ± 0.08 [.028 ] 5.08 Ş 3.67 Max. ± .003 [.200 ] [.145] ± 0.08 Ş 1.32 ± .003 [.052 ] 4 Plcs. Recommended PC Board Layout Leg Center Contact Body Part No. Length Plating Plating 2.11 Gold Gold Flash 415504-2 .083 3.05 Gold Gold 415504-3 .120 3.05 Gold Gold Flash 415504-4 .120 3.18 5.54 Right-Angle PC Board [.125] [.218] ± 0.08 5.08 Jacks ± .003 ± 0.08 [.200 ] 2.54 ± .003 [.100 ] ± 0.25 7.95 ± 0.08 Ş 0.71 ± .010 [.313 ] ± .003 ± 0.08 [.028 ] 5.08 14.1 ± .003 [.200 ] [.555] ± 0.08 Ş 1.32 ± .003 [.052 ] 4 Plcs. Recommended Ş 3.71 Max. PC Board Layout [.146] Leg Center Contact Body Part No. Length Plating Plating 2.79 Gold Gold 415490-1 .110 2.79 Gold Nickel 415490-2 .110 2.11 Gold Gold 415490-3 .083 2.11 Gold Nickel 415490-4 .083 4.50 2.79 Right-Angle PC Board [.177] [.110] Bulkhead Jacks ± 0.08 5.08 ± .003 ± 0.08 [.200 ] 2.54 ± .003 [.100 ] ± 0.08 Ş 0.71 ± 0.08 19.94 ± .003 5.08 [.028 ] ± .003 [.785] [.200 ] 2.36 Max. ± 0.08 Ş 1.32 11.18 [.093] ± .003 [.052 ] [.440] Panel 4 Plcs. Thickness Recommended PC Board Layout Ş 3.71 Max. [.146] Leg Center Contact Body Part No. Length Plating Plating 2.79 Gold Nickel 415377-1 .110 2.79 Gold Gold 415377-2 .110 2.79 Note: Part Numbers are RoHS Gold Gold 415377-5* .110 compliant except: � Indicates non-RoHS compliant. *Isolated. 185 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) Product Facts ■ Widely used in data transmission and telecom- munication applications ■ BT 43 connector developed from the SMB range and feature snap-on and latching variant ■ Most BT 43 connectors are available as fully crimped connectors. ■ BT 43 and 75 Ω connectors available in solder and crimp versions The Tyco Electronics range Female center contacts — Specifications Copper Alloy of 75 ohm SMB (SMZ) Max working voltage (dc) — 500 V connectors are designed Male center contacts — Max proof voltage (dc) — 1.5 kV Copper Alloy to meet the increasing Contact resistance (inner) — demands of the Outer contacts — BeCu 5 milliohm Telecommunications Plating — Contact resistance (outer) — market, and are designed Contacts and critical surfaces — Gold 1 milliohm Other parts — Nickel in accordance with Bodies and other parts — Brass BS9210 F0022. Insulators — P.T.F.E. 186 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) Straight Plugs, Snap-On 30.5 Assembled [1.20] 28.0 [1.10] 20.4 8.8 [0.80] Dia. [0.35] Termination Method Cable Type Body Plating Part No. Inner Outer RG 179B/U Crimp Crimp Selective Gold 1311097-1 BT2002 Crimp Crimp Selective Gold 1311098-1 29.9 Straight Plugs, Latching, Assembly [1.18] Crimp/Crimp 27.8 9.6 Dia. [1.09] [0.38] Cable Type Body Plating Part No RG 179B/U Selective Gold 1311099-1 BT2003 Selective Gold 1311100-1 BT2002 Selective Gold 1311101-1 BT2001 Selective Gold 1311696-1 BT3002, TZC75024 Selective Gold 1311102-1 RG 59B/U, Selective Gold 1313507-1 RG 140/U, URM90 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 187 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) 17.93 Right-Angle Socket, Max. [0.71] Snap-On, Solder/Crimp 21.67 Max. [0.85] 16.86 [0.66] 10.16 Max. Max. [0.40] Cable Type Body Plating Part No RG 179B/U Selective Gold 1311103-1 BT3002, TZC75024 Selective Gold 1311104-1 23.0 Right-Angle Socket, Ref. [0.91] Latching, Solder/Crimp 21.0 Ref. [0.83] 16.3 Ref. [0.64] 9.9 Ref. [0.39] Cable Type Body Plating Part No RG 179B/U Selective Gold 1311106-1 BT2003 Selective Gold 1311698-1 BT3002, TZC75024 Selective Gold 1311111-1 RG 59B/U, RG 140/U Selective Gold 1313508-1 30.4 Straight Free Plug, Assembled [1.20] Crimp/Crimp 20.2 [0.80] 5.60 8.82 Dia. [0.22] [0.35] Cable Type Body Plating Part No RG 179B/U Selective Gold 1408041-1 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 188 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) 30.8 Assembled Straight Bulkhead Plug [1.21] 28.5 [1.12] 10.8 [0.43] 3.0 Max [0.12] Panel 8.4 5.6 [0.33] [0.22] Dia. 7.5 [0.30] Mounting Detail Termination Method Cable Type Body Plating Part No. Inner Outer RG 179B/U Crimp Crimp Selective Gold 1311120-1 BT500B, BT2003, Crimp Crimp Selective Gold 1311701-1 BT2003A BT3002, TZC75024 Crimp Crimp Selective Gold 1311122-1 32.1 Assembled Length [1.26] ± 0.05 10.75 ± .002 [0.42 ] ± 0.10 9.50 7.50 ± .004 A/F [0.37 ] [0.30] 8.00 Dia. Panel Cut Out [0.31] Termination Method Cable Type Body Plating Part No. Inner Outer 3M: 043, 031C, Crimp Crimp Selective Gold 1313511-1 CS4456, Gore: GCX 20.4 Right-Angle Bulkhead Plug, [0.80] Solder/Crimp 16.7 Ref. [0.66] 21.5 Ref. [0.85] 10.1 Ref. [0.40] Cable Type Body Plating Part No RG 179B/U Selective Gold 1311115-1 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 189 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) 30.4 Assembled DDF Plug, [1.20] Crimp/Crimp 27.9 [1.10] 10.3 Dia. [0.41] Cable Type Body Plating Part No RG 179B/U Selective Gold 1327083-1 BT2003 Selective Gold 1311117-1 BT2002 Selective Gold 1311700-1 B2001 Selective Gold 1313883-1 BT3002, TZC75024 Selective Gold 1311118-1 RG 59B/U, RG 140/U, Selective Gold 1313887-1 URM90 DDF Plug, Crimp/Crimp 7.54 Ref. [0.30] 27.8 Ref. [1.09] Cable Type Body Plating Part No RD179, 124431 (Filotex), 1366 (Orebro), K02253D-1, Selective Gold 1314422-1 K02253-2 (Shuner) PC Board Plug 43/1D PC Board Plug 43/1E 11.4 13.2 [0.45] [0.52] 5.08 6.20 3.80 5.08 9.5 5.08 Dia. [0.20] 5.08 [0.24] [0.15] [0.20] [0.37] [0.20] [0.20] 15.0 0.90 [0.59] Dia. 6.5 [0.04] 1.70 Dia. 1.20 Dia. 1.70 Dia. [0.26] 1.20 Dia. [0.07] 4 Holes [0.05] 1 Hole [0.067] 4 Holes Sq. [0.047] 1 Hole Mounting Detail Mounting Detail Body Plating Part No. Body Plating Part No. Selective Gold 1311125-1 Selective Gold 1314103-1 Right-Angle PC Board Plug 22.14 5.08 [.872] [.200] 5.08 ± 0.10 Ş 1.20 Ş 8.35 [.200] Min. ± .004 [.047] [.329 ] 5/16-32 Ş 1.70 Min. UNEF 14.00 [.067] 4 Holes [.551] Ş 6.22 2.54 2.54 [.245] [.100] [.100] 3/8 Across Flats Ş 8.21 ± 0.10 2.90 Mounting Detail Panel Cutout Detail [.323] ± .004 [.114 ] Part No. 1314102-1 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 190 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connectors, 75 Ohm BT 43 (SMZ) (Continued) 17.1 Straight Adapter 17.0 [0.67] 7.5 Plug-Plug [0.67] [0.30] 11.0 Dia. [0.43] 8.0 Dia. 8.7 [0.31] A/F 2.2 Max. [0.34] [0.09] Panel Mounting Detail Part No. 1313364-1 Part No. 1311127-1 Body Plating Part No. Selective Gold 1313364-1 Selective Gold 1311127-1 37.4 Tester 430A [1.47] 11.1 8.8 Dia. Dia. [0.44] [0.35] Body Plating Part No. Selective Plating 6-1311703-1 100.0 Extraction Tool 65A [3.94] 10.0 Dia. [0.39] Part No. 1311164-1� Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 191 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMB Connector Crimp Tooling 50 Ω/75 Ω Commercial Connector Tooling MIL Type Connector Tooling Center Contact Crimp Tooling Braid Crimp Tooling Center Contact Crimp Tooling Braid Crimp Tooling MIL-C- Dies for Dies for RG/U Dies for MIL-C- 22520/2-01 Tyco Electronics Tyco Electronics Cable Tyco Electronics 22520/5-01 DANIELS* DANIELS* DANIELS Hex Die Selector Tool PRO-CRIMPER PRO-CRIMPER PRO-CRIMPER Tool Hand Positioner Hand Across Position Hand Tool Hand Tool Hand Tool DANIELS* Hex Tool Number Tool Flats DANIELS* Position Number Crimp Die Positioner Number Position Number Position 178, 178A, Female-K699 Female-K699 2.67 178B, 196, 58489-1 4 58489-1 A&B Y624 AFM8 4 58483-1 A HX4-1637 Male-K727 Male-K727 .105 196A Double Braid Female-K699 3.25 —— —— —— AFM8 4 58483-1 B HX4-1637 178, 196 Male-K727 .128 174, 316 Female-K699 Female-K699 3.25 58489-1 4 58489-1 A Y444 AFM8 4 58483-1 B HX4-1637 188, 188A Male-K727 Male-K727 .128 Double Braid Y196 3.84 174, 316, 58489-1 Female-K699 4 58489-1 C AFM8 Female-K699 4 58483-1 C HX4-1637 Location A .151 188 Double Braid Y196 3.25 174, 316, 58489-1 Male-K727 4 58489-1 C AFM8 Solder — 58483-1 B HX4-1637 Location A .128 188 179, 179A 179B, 161, 3.25 58489-1 Female-K699 4 58489-1 A Y444 AFM8 Female-K699 4 58483-1 B HX4-1637 187, 187A, .128 BELDEN 9221 179, 179A 179B, 161, 3.25 58489-1 Male-K727 4 58489-1 A Y444 — Solder — 58483-1 B HX4-1637 187, 187A, .128 BELDEN 9221 180, 180A 3.84 —— —— —— — Solder — 58483-1 C HX4-1637 180B .151 Mini SMB 75 ohm 179, 187 — Female-K699 — 58483-1 B HX4-1637 — — — — — — — Solder 179, 187 — Center — 58483-1 B HX4-1637 — — — — — — — Contact Note: All 75 ohm SMB connectors have a solder center contact. Note: Equivalent military tool part numbers– M22520/5-37 – DANIELS Die Set Y138 M22520/5-01 – DANIELS Hand Tool HX4 M22520/5-41 – DANIELS Die Set Y140 * DANIELS Manufacturing Corporation Telephone: 407-855-6161 M22520/5-33 – DANIELS Die Set Y136 M22520/5-03 – DANIELS Die Set Y196 6103 Anno Avenue FAX: 407-855-6884 M22520/2-01 – DANIELS Hand Tool AFM8 Orlando, Florida 32809 BELDEN is a trademark of Belden Wire and Cable Company. DANIELS is a trademark of Daniels Manufacturing Corporation. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 192 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208