Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Contact System Chapter 3 – Issued 3-2010. Introduction AMP MCP offers High Reliability for Long Term Use The AMP MCP (Multiple Con- AMP MCP Contacts AMP MCP Connectors tact Point) Connector System � Basic material (CuNiSi) with � High reliability status is designed for electronic high current capacity supported for long term use and electrical applications in � 3 redundant contact points � High vibration level motor vehicles. (1.5 mm type), 4 contact supported It fullfils all requirements for points (2.8 mm/6.3 mm � Perfect design to avoid a connector system for use type), 6 contact points quality problems, reduce in automobiles and covers a (9.5 mm type) manufacturing and service wide range of applications. � Good guiding inside the cost cavity � Integrated secondary � Protected contact spring locking device delivered in due to the closed box pre-locked position � Overstress protection of the � Wire-to-wire sealed and contact springs unsealed connectors (SWS) � Steel box with secondary � Wire-to-board sealed and locking possibility from four unsealed connectors (SWS) sides � Polarisation, several keyings SUPERSEDED � Protected locking lance � Locking mechanism for smaller connectors/mating aid for higher numbers of NOT the LATEST ways REVISION All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-1 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 Chapter 3 – Issued 3-2010. Engineering Notes All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-2 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 Contact Systems Chapter 3 – Issued 3-2010. Introduction The AMP MCP Contact The Main Advantages � Protection of the contact System is mainly used in the of the Body are: springs automotive industry. Each � Several contact points � No over elongation of the contact consists of a flat contact springs possible � Large range of wire sizes receptacle, which mates 2 under normal circum- (from 0.2 mm at AMP MCP with a flat tab. Every contact 2 stances 1.5K up to 16.0 mm at has got a steel spring and a � No possibility to connect AMP MCP 9.5) copper alloy body. from the rear side � Base material with very high The two-piece contact design � Protection against current capability means that the electrical and mechanical damage � High vibrational load mechanical properties are � Good guiding in the cavity separated. One end of the Tabs and receptacles can be � Secondary locking possible contact body is crimped to applied in both sealed and (from 4 directions) wire and the other end mates unsealed connectors. with the matching tab. The � Assembly into housing closed spring has got several fully-automatically AMP MCP contacts can functions and also different be fast and economically In addition there are usually advantages for the complete arranged to the lead using two lances on the steel to contact system. Tyco Electronics application spring. These serve to lock tooling. the contact securely in the housing. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-3 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Contact System Chapter 3 – Issued 3-2010. Receptacle Contacts (for 0.6 mm Tab Thickness) Technical Features Contact Material: CuNiSi Top Spring: Stainless Steel 0.25 2.7 Contact Finish: Tin plated, selective silver plated, selective gold plated 10.6 Wire Size Range: 2 2 0.20–0.35 mm , 0.5–1.0 mm , 2 19.8 >1.0–1.5 mm (FLR Cable) Current Carrying Capacity: up to 20 Ampere (at 20 °C ambient temperature) Temperature Range: 3.4 2.3 –40 °C ... +130 °C (tin plated) –40 °C ... +140 °C (silver plated) –40 °C ... +150 °C (gold plated) Modular Dimensions (Centerline): 2 0.2–1.5 mm SRC: – 4.0 x 4.0 mm – 4.0 x 3.5 mm (Staggered) 2 0.2–1.5 mm SWS: Contact Resistance: Dimension of Male Contacts: Product Group Drawing: +0.2 +0.07 – 4.0 x 4.0 mm New State �2 m� 1.5 x 0.6 mm 1241436 –0.1 –0.03 – 4.0 x 3.5 mm (Staggered) Mating Force: Max. 6 N Extraction Tool: Product Specification: � Mating Cycles: Part No. 1-1579007-1 108-18716 Unmating Force: Max. 6 N up to 10 cycles (tin plated) Application Specification: up to 50 cycles (silver plated) � 114-18386 up to 100 cycles (gold plated) ) Mating Cycles are depending on various technical influences and must be clarified in each individual case. Standard Receptacle Contacts (SRC) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.20–0.35 – 1.1–1.4 -1 / -2 1241372 10,000 1241373 500 x-1528194-x 1.4–2.1 -1 / -2 1241374 8,000 1241375 500 x-1528195-x 2063524-1 0.5–1.0 – ��� �� ��� �� max. 2 x 1.6 -1 / -2 1241376 6,000 1241377 500 x-1528388-x >1.0–1.5> – 2.2–2.4 -1 1534334 7,500 1534335 500 x-1528312-x – Receptacle Contacts Single Wire Sealing System (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.20–0.35 – 1.1–1.4 -1 / -2 / -3 1241378 4,500 1241379 500 x-1528122-x 2063524-1 0.5–1.0 – 1.4–2.1 -1 / -2 / -3 / 1-xxx-2 1241380 4,500 1241381 500 x-1528324-x >1.0–1.5> – 2.2–2.4 -1 / -3 1418884 4,500 1418885 500 x-1530008-x – � � ) Material and Finish: Notes: ) The pre- and suffix for the �� applicators depends on the 1-xxx-1 = CuNiSi, pre-tin plated ) Double Crimp applied termination equipment. 1-xxx-2 = CuNiSi, selective gold plated 1-xxx-3 = CuNiSi, selective silver plated 1-xxx-2 = CuNiSi, min. 1.27 µm selective gold plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-4 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Contact System Chapter 3 – Issued 3-2010. Receptacle Contacts (for 0.8 mm Tab Thickness) Technical Features Contact Material: CuNiSi Top Spring: Stainless Steel 0.25 2.7 Contact Finish: Tin plated, selective silver plated, selective gold plated 10.6 Wire Size Range: 2 2 0.20–0.35 mm , 0.5–1.0 mm , 2 19.8 >1.0–1.5 mm (FLR Cable) Current Carrying Capacity: up to 20 Ampere (at 20 °C ambient temperature) Temperature Range: 3.4 2.3 –40 °C ... +130 °C (tin plated) –40 °C ... +140 °C (silver plated) –40 °C ... +150 °C (gold plated) Modular Dimensions (Centerline): 2 0.2–1.5 mm SRC: – 4.0 x 4.0 mm – 4.0 x 3.5 mm (Staggered) 2 0.2–1.5 mm SWS: Contact Resistance: Dimension of Male Contacts: Product Group Drawing: +0.2 ±0.03 – 4.0 x 4.0 mm New State �2 m� 1.5 x 0.8 mm 1241436 –0.1 – 4.0 x 3.5 mm (Staggered) Mating Force: Max. 6 N Extraction Tool: Product Specification: � Mating Cycles: Part No. 1-1579007-1 108-18716 Unmating Force: Max. 6 N up to 10 cycles (tin plated) Application Specification: up to 50 cycles (silver plated) � 114-18386 up to 100 cycles (gold plated) ) Mating Cycles are depending on various technical influences and must be clarified in each individual case. Standard Receptacle Contacts (SRC) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.5–1.0 – 1.4–2.1 -1 1418408 8,000 1418409 500 x-1528195-x 2063524-1 >1.0–1.5> – 2.2–2.4 -1 1418410 7,500 1418411 500 x-1528312-x – Receptacle Contacts Single Wire Sealing System (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.20–0.35 – 1.15–1.40 -1 1534160 4,500 1534161 500 x-1528122-x 2063524-1 0.5–1.0 – 1.4–2.1 -1 1534162 4,500 1534163 500 x-1528324-x >1.0–1.5> – 2.2–2.4 -1 1718558 4,500 1718559 500 x-1530008-x – � � ) Material and Finish: ) The pre- and suffix for the applicators depends on the 1-xxx-1 = CuNiSi, pre-tin plated applied termination equipment. 1-xxx-2 = CuNiSi, selective gold plated 1-xxx-3 = CuNiSi, selective silver plated 1-xxx-2 = CuNiSi, min. 1.27 µm selective gold plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-5 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Contact System Chapter 3 – Issued 3-2010. Tab Contacts Tabs 1.6 x 0.6 mm with Steel Top Spring, Mates with 22.4 AMP MCP 1.5K Contact System 5.7 0.32 1.6 Product Specification: 0.4 108-18331 Spring 1 Application Specification: 114-18082 1.2 0.6 8.0 5.7 Standard Tab Contacts (STC) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 1) 1) 0.2–0.5 – 1.15–1.60 -1 / -2 / -3 963898 7,000 963899 500 x-1528061-x 2063265-1 1) 1) 0.5–1.0 – 1.4–2.1 -1 / -2 / -3 963900 6,000 963901 500 x-1528256-x Tab Contacts Single Wire Sealing System (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 1) 1) 0.2–0.5 – 1.15–1.60 -1 / -2 / -3 963902 4,000 963903 500 x-1528281-x 2063265-1 1) 1) 0.5–1.0 – 1.4–2.1 -1 / -2 / -3 963904 4,000 963905 500 x-1528054-x � � Remarks: ) Material and Finish: ) The pre- and suffix for the 1) = With Spring 1 applicators depends on the xxx-1 = CuSn4, pre-tin plated applied termination equipment. xxx-2 = CuFe2, pre-tin plated xxx-3 = CuSn4, gold plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-6 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Contact System Chapter 3 – Issued 3-2010. Tab Contacts Tabs 1.6 x 0.6 mm with Modified Steel Top Spring, 22.4 Mates with 5.7 AMP MCP 1.5K 0.32 Contact System 1.6 0.6 Extraction Tool: Spring 2 Part No. 539960-1 Product Group Drawing: 1355055 Product Specification: 0.8 0.6 108-18331 Application Specification: 114-18082 8.0 5.7 Standard Tab Contacts with Modified Spring (STC) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 2) 2) 0.2–0.5 – 1.15–1.60 -2 / -3 964265 7,500 964266 500 x-1528091-x 3) 2) 3) 3) 2) 3) 0.5–1.0 – 1.4–2.1 -2 / -3 969079 5,500 969080 500 x-1528096-x 2063409-1 2) 2) 0.5–1.0 – 1.4–2.1 -1 / -2 / -3 964267 6,000 964268 500 x-1528092-x 2) 2) 1.5 – 2.2–2.4 -1 / -2 / -3 1241846 1 4,000 1241847 1 500 x-1528123-x – Tab Contacts Single Wire Sealing System with Modified Spring (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 2) 2) 0.2–0.5 – 1.2–1.6 -2 / -3 969028 4,000 969029 500 x-1528068-x 539663-2 2) 2) 0.5–1.0 – 1.4–2.1 -2 / -3 964269 4,000 964270 500 x-1528261-x � � Remarks: ) Material and Finish: ) The pre- and suffix for the applicators depends on the 2) = With Spring 1 (shown on Page 3-4) or Spring 2 xxx-1 = CuSn4, pre-tin plated 3) = For Double and Single Termination applied termination equipment. xxx-2 = CuFe2, pre-tin plated xxx-3 = CuSn4, gold plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-7 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Contact System Chapter 3 – Issued 3-2010. Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for AMP MCP 1.5K Contact System (Cavity Diameter 3.6 mm) � 2.6 � 3.9 4.3 7.8 Insulation Package Diameter Color Part Number Quantity (mm) 0.9–1.2 Green 1718705-10 10,000 Red 964971-1 10,000 1.2–1.6 Blue 1394133-12 10,000 1.4–1.9 Gray 963530-1 10,000 1.9–2.4 Yellow 964972-1 10,000 White 963531-1 10,000 Sealing Plug Natural 1394132-12 10,000 Contact Cavity of Housing � 3.6 +1.5 1.5 Sealing Plug All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-8 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Contact System Chapter 3 – Issued 3-2010. Receptacle Contacts Technical Features Material: 20.2 Contact: CuNiSi Tabs: CuSn4, CuFe2 Top Spring: Stainless Steel Contact Finish: 0.32 Tin plated, selective silver plated, 4.4 selective gold plated Wire Size Range: 2 2 0.2–0.5 mm , 0.5–1.0 mm , 2 2 max. 0.3 1.0–2.5 mm , 2.5–4.0 mm Single Wires (FLR) Current Carrying Capacity: up to 40 Ampere (at 20 °C ambient temperature) � Mating Force : 3.1 Max. 6 N � Unmating Force : Max. 5 N Modular Dimensions (Centerline) 2 0.35–2.5 mm SRC: – 5.0 x 5.5 mm � Temperature Range: Product Specification: – 5.0 x 5.0 mm (Staggered) Mating Cycles: 2 2.5–4.0 mm SRC: up to 20 cycles (tin plated) –40 °C ... +130 °C (tin plated) 108-18513 – 5.5 x 5.5 mm up to 50 cycles (silver plated) –40 °C ... +140 °C (silver plated) Application Specification: – 5.0 x 5.5 mm (Staggered) up to 100 cycles (gold plated) –40 °C ... +150 °C (gold plated) 2 114-18148 2.5–4.0 mm SWS: Dimension of Male Contacts: Contact Resistance: – 7.2 x 7.2 mm ±0.1 ±0.03 Product Group Drawing: 2.8 x 0.8 mm New State �2 m� – 6.0 x 7.2 mm (Staggered) ±0.1 ±0.03 3.0 x 0.8 mm 1355036 Extraction Tool: Part No. 1579007-1 � ) Steel Tab, see Specifications � ) Mating Cycles are depending on various technical influences and must be clarified in each individual case. Standard Receptacle Contacts (SRC) Insulation Diameter Part Numbers Wire Size Material (mm) Range � Strip Package Loose- Package Hand Tool and Finish � � 2 Applicator (mm ) FLK FLR Form Quantity Piece Quantity Complete 0.2–0.5 – 1.2–1.4 1-xxx-1 / 1-xxx-3 968880 4,500 968895 500 x-1528381-x 2119158-1 0.5–1.0 – 1.4–2.1 1-xxx-1 / 1-xxx-2 / 1-xxx-3 968849 4,500 968872 500 x-1528115-x 2063534-1 1.0–2.5 – 2.2–3.0 1-xxx-1 / 1-xxx-2 / 1-xxx-3 968851 3,500 968873 500 x-1528033-x 2063532-1 2.5–4.0 – 3.0–3.7 1-xxx-1 / 1-xxx-3 968853 2,700 968874 500 x-1528430-x Receptacle Contacts Single Wire Sealing System (SWS) Insulation Diameter Part Numbers Wire Size Material (mm) Range � Strip Package Loose- Package Hand Tool and Finish � � 2 Applicator (mm ) FLK FLR Form Quantity Piece Quantity Complete 0.35 – 1.2–1.4 1-xxx-1 / 1-xxx-3 968882 4,500 968896 500 x-1426162-x 2063623-1 0.5–1.0 – 1.4–2.1 1-xxx-1 / 1-xxx-2 / 1-xxx-3 968855 3,500 968875 500 x-1528017-x 2063624-1 1.0–2.5 – 2.2–3.0 1-xxx-1 / 1-xxx-3 968857 4,000 968876 500 x-1528066-x 2063523-1 2.5–4.0 – 3.0–3.7 1-xxx-1 / 1-xxx-3 968859 2,500 968877 500 x-1528067-x � � ) Material and Finish: 1-xxx-1 = CuNiSi, pre-tin plated ) The pre- and suffix for the 1-xxx-2 = CuNiSi, selective gold plated applicators depends on the 1-xxx-3 = CuNiSi, selective silver plated applied termination equipment. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-9 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Contact System Chapter 3 – Issued 3-2010. Lanceless Receptacle Contacts Technical Features Material: Contact: CuNiSi Tab: CuSn4, CuFe2 20.2 Top Spring: Stainless Steel Contact Finish: Tin plated Wire Size Range: 2 2 0.2–0.5 mm , >0.5–1.0 mm , 0.32 2 2 >1.0–2.5 mm , >2.5–4.0 mm 4.4 Single Wires (FLR) Current Carrying Capacity: up to 40 Ampere (at 20 °C ambient temperature) max. 0.3 Temperature Range: –40 °C ... +130 °C (tin plated) –40 °C ... +140 °C (silver plated) –40 °C ... +150 °C (gold plated) Modular Dimensions 3.1 (Centerline): 2 0.35–2.5 mm SRC: – 5.0 x 5.5 mm – 5.0 x 5.0 mm (Staggered) 2 2.5–4.0 mm SRC: – 5.5 x 5.5 mm – 5.0 x 5.5 mm (Staggered) � Mating Force : Max. 6 N Contact Resistance: Dimension of Male Contacts: Product Specification: � Unmating Force : ±0.1 ±0.03 New State �2 m� 2.8 x 0.8 mm 108-18513 ±0.1 ±0.03 Max. 5 N 3.0 x 0.8 mm � Application Specification: Mating Cycles: Extraction Tool: 114-18148 up to 20 cycles (tin plated) up to 50 cycles (silver plated) Extraction possible without tool Product Group Drawing: up to 100 cycles (gold plated) � 1719458 ) Steel Tab, see Specifications � ) Mating Cycles are depending on various technical influences and must be clarified in each individual case. Lanceless Receptacle Contacts Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.2–0.5 – 1.2–1.4 1-xxx-1 1355876 4,500 – – On request – >0.5–1.0> – 1.4–2.1 1-xxx-1 1355833 4,500 – – On request – >1.0–2.5> – 2.2–3.0 1-xxx-1 1355877 3,500 – – On request – >2.5–4.0> – 3.0–3.7 1-xxx-1 1355880 2,700 – – On request � ) Material and Finish: 1-xxx-1 = CuNiSi, pre-tin plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-10 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8K Contact System Chapter 3 – Issued 3-2010. Receptacle Contacts Technical Features Contact Material: 19.0 / 20.0 CuNiSi Top Spring: Stainless Steel Contact Finish: 0.32 Tin plated, selective silver plated, 4.4 selective gold plated Wire Size Range: 2 2 0.20–0.35 mm , 0.5–1.0 mm , 2 >1.0–2.5 mm (FLR Cable) 10.4 Current Carrying Capacity: up to 34 Ampere (at 20 °C ambient temperature) Temperature Range: –40 °C ... +130 °C (tin plated) 4.2 3.1 –40 °C ... +140 °C (silver plated) –40 °C ... +150 °C (gold plated) Modular Dimensions (Centerline): 2 0.35–2.5 mm SRC: – 5.0 x 5.5 mm – 5.0 x 5.0 mm (Staggered) 2 0.35–2.5 mm SWS: – 6.0 x 6.0 mm Contact Resistance: Dimension of Male Contacts: Product Group Drawing: – 5.0 x 5.5 mm (Staggered) ±0.1 ±0.03 New State �2 m� 2.8 x 0.8 mm 1241437 � ±0.1 ±0.03 Mating Cycles: 2.8 x 0.6 mm Mating Force: Max. 10 N Product Specification: ±0.1 ±0.03 3.0 x 0.8 mm up to 10 cycles (tin plated) ±0.1 ±0.03 Unmating Force: Max. 7 N 108-18717 3.0 x 0.6 mm up to 50 cycles (silver plated) up to 100 cycles (gold plated) Application Specification: Extraction Tool: 114-18387 Part No. 1579007-1 � ) Mating Cycles are depending on various technical influences and must be clarified in each individual case. Standard Receptacle Contacts (SRC) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.20–0.35 – 1.1–1.4 -1 / -2 1241386 4,000 1241387 500 x-1528196-x 0.5–1.0 – 1.4–2.1 -1 / -2 1241388 3,500 1241389 500 x-1528097-x 2063531-1 >1.0–2.5> – 2.2–3.0 -1 / -2 1241390 3,500 1241391 500 x-1528001-x Receptacle Contacts Single Wire Sealing System (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.20–0.35 1.3–1.5 1.1–1.4 -1 / -2 / -3 1241392 3,500 1241393 500 x-1528001-x 0.5–1.0 2.0–2.7 1.4–2.1 -1 / -2 / -3 1241394 3,500 1241395 500 x-1528101-x 2063526-1 >1.0–2.5> 2.2–3.0 2.2–3.0 -1 / -2 / -3 1241396 3,500 1241397 500 x-1528026-x � � ) Material and Finish: ) The pre- and suffix for the applicators depends on the xxx-1 = CuNiSi, pre-tin plated applied termination equipment. xxx-2 = CuNiSi, selective gold plated xxx-3 = CuNiSi, selective silver plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-11 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Contact System Chapter 3 – Issued 3-2010. Tab Contacts Tabs 2.8 x 0.8 mm with Steel Top Spring, Mates with AMP MCP 2.8 25.5 – 28.6 Contact System 0.32 2.8 Extraction Tool: Part No. 1-1579007-6 Product Group Drawing: 0.85 1355052 Product Specification: 108-18063 Application Specification: 9.5 6.0 0.8 114-18051 1.4 Standard Tab Contacts Part Numbers Insulation Diameter Wire Size Material Hand Range � Strip Package Loose- Package FLK FLR and Finish � � 2 Applicator Tool (mm ) Form Quantity Piece Quantity (mm) (mm) Complete 1-xxx-1 / 1-xxx-2 / 1-xxx-3 / 0.2–0.5 – 1.15–1.60 963860 4,000 963861 500 x-1528859-x 734538-1 2-xxx-1 / 2-xxx-2 / 2-xxx-3 / 1-xxx-1 / 1-xxx-2 / 1-xxx-3 / 0.5–1.0 – 1.4–2.0 962841 4,000 963745 500 x-1528315-x 2063490-1 2-xxx-1 / 2-xxx-2 / 2-xxx-3 / 1-xxx-1 / 1-xxx-2 / 1-xxx-3 / 1.5–2.5 – 2.1–2.9 962842 3,500 963746 500 x-1528305-x 2063490-1 2-xxx-1 / 2-xxx-2 / 2-xxx-3 / 1-xxx-1 / 1-xxx-2 / 4.0 – 3.4–3.7 968946 2,700 968965 500 x-1528430-x – 2-xxx-1 / 2-xxx-2 / 3-xxx-1 / Tab Contacts with Single Wire Sealing System Part Numbers Insulation Diameter Wire Size Material Hand Range � Strip Package Loose- Package and Finish FLK FLR � � 2 Applicator Tool (mm ) Form Quantity Piece Quantity (mm) (mm) Complete 0.2–0.5 – max. 2.1 1-xxx-1 / 1-xxx-3 965982 3,500 965983 500 x-1528406-x 734538-1 1-xxx-1 / 1-xxx-2 / 1-xxx-3 / 0.5–1.0 – max. 2.1 962915 3,500 963748 500 x-1528452-x 2063490-1 2-xxx-1 / 2-xxx-2 / 2-xxx-3 / 1-xxx-1 / 1-xxx-2 / 1-xxx-3 / 1.5–2.5 – max. 3.0 962916 3,500 963749 500 x-1528316-x 2063490-1 2-xxx-1 / 2-xxx-2 / 2-xxx-3 / 1-xxx-1 / 1-xxx-2 / 4.0 – max. 3.7 968947 3,500 968966 500 x-1528067-x – 2-xxx-1 / 2-xxx-2 / 3-xxx-1 / � � ) Material and Finish: ) The pre- and suffix for the applicators depends on the 1-xxx-1 = CuSn, pre-tin plated 2-xxx-1 = CuFe, pre-tin plated applied termination equipment. 1-xxx-2 = CuSn, selective silver plated 2-xxx-2 = CuFe, selective silver plated 1-xxx-3 = CuSn, selective gold plated 2-xxx-3 = CuFe, selective gold plated 3-xxx-1 = CuSn, pre-tin plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-12 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8K Contact System Chapter 3 – Issued 3-2010. Tab Contacts Tabs 2.8 x 0.8 mm, with Modified Steel Top Spring, 24.2 – 25.0 Mates with AMP MCP 2.8/ 2.8K Contact System 0.32 2.8 Extraction Tool: Part No. 1-1579007-6 0.85 Product Group Drawing: 1355364 Product Specification: 108-18063 9.5 6.0 0.8 Application Specification: 114-18051 0.8 Standard Tab Contacts with Modified Spring (STC) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.2–0.5 – 1.15–1.60 1-xxx-3 / 2-xxx-1 964292 4,000 964291 500 x-1528004-x 0.5–1.0 – 1.4–2.1 1-xxx-3 / 2-xxx-1 / 2-xxx-2 964294 4,000 964293 500 x-1528097-x 2063533-1 1.25–2.50 – 2.2–3.0 1-xxx-3 / 2-xxx-1 / 2-xxx-2 964296 3,300 964295 500 x-1528001-x Tab Contacts Single Wire Sealing System with Modified Spring (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.2–0.5 – 1.15–1.60 1-xxx-3 / 2-xxx-1 964298 3,500 964297 500 x-1528025-x 0.5–1.0 – 1.4–2.1 1-xxx-3 / 2-xxx-1 / 4-xxx-1 964300 3,500 964299 500 x-1528101-x 2063435-1 1.25–2.50 – 2.2–3.0 1-xxx-3 / 2-xxx-1 964302 3,500 964301 500 x-1528026-x � ) Material and Finish: � ) The pre- and suffix for the 1-xxx-3 = CuSn, selective gold plated applicators depends on the 2-xxx-1 = CuFe, pre-tin plated applied termination equipment. 2-xxx-2 = CuFe, pre-silver plated 4-xxx-1 = CuNi, plain All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-13 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Contact System Chapter 3 – Issued 3-2010. Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for AMP MCP 2.8 Contact System 4.3 (Two Cavity Diameters) A � 3.4 7.8 Function Relevant Example for Wire Size, Diameter Cavity Insulation FLR Insulation Part Package Color A Size Diameter according ISO 6722 Number Quantity � � (mm) 2 (mm) (mm ) 828904-1 1,000 A 1.2–2.1 (0.35–1.00) Blue 5.6 828904-2 10,000 A 2.2–3.0 (1.5–2.5) White 5.6 828905-1 10,000 B 3.0–3.7 (2.5–4.0) Green 7.2 828985-1 5,000 A Sealing Plug Natural 5.6 828922-1 10,000 B Sealing Plug Brown 7.2 828986-1 5,000 For correct use see Application Specification 114-18148. Cavity Size A Cavity Size B Contact Cavity of Housing Contact Cavity of Housing � 5.2 � 6.45 Sealing Plug Sealing Plug All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-14 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8K Contact System Chapter 3 – Issued 3-2010. Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for AMP MCP 2.8K Contact System (Cavity Diameter 5.2 mm) � 3.4 � 5.65 4.3 7.8 Wire Size Range Insulation 2 Package (mm ) Diameter Color Part Number Quantity (mm) FLK FLR 0.35 0.35–1.00 1.2–2.1 Blue 963294-1 5,000 0.5–1.0 1.5 2.0–2.7 Red-Brown 963293-1 5,000 1.5 2.5 2.7–3.0 Yellow 963292-1 5,000 Natural 828922-1 10,000 – – Sealing Plug Green 828922-2 10,000 Contact Cavity of Housing � 5.2 +1.5 Sealing Plug 1.5 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-15 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 Chapter 3 – Issued 3-2010. Engineering Notes All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-16 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 6.3/4.8K Contact System Chapter 3 – Issued 3-2010. Receptacle Contacts Technical Features Contact Material: CuNiSi Top Spring: Stainless Steel Contact Finish: 0.4 6.9 Tin plated, selective silver plated Wire Size Range: 2 2 0.2–0.5 mm , 0.5–1.0 mm , 2 2 >1.0–2.5 mm , >2.5–4.0 mm , 2 >4.0–6.0 mm 10.6 Current Carrying Capacity: 19.0 / 20.0 up to 40 Ampere (at 20 °C ambient temperature) Temperature Range: –40 °C ... +130 °C (tin plated) –40 °C ... +140 °C (silver plated) 4.9 4.1 –40 °C ... +140 °C (tin-silver) Modular Dimensions (Centerline): 2 0.2–6.0 mm SRC: – 6.0 x 8.0 mm 2 0.2–4.0 mm SWS: – 9.0 x 9.0 mm – 8.0 x 9.0 mm (Staggered) � Mating Force: max. 16 N Product Group Drawing: Mating Cycles: Dimension of Male Contacts: up to 10 cycles (tin plated) 1241438 Unmating Force: max. 11 N ±0.1 ±0.03 4.8 x 0.8 mm up to 10 cycles (silver plated) ±0.1 ±0.03 5.8 x 0.8 mm Extraction Tool: Product Specification: ±0.1 ±0.03 6.3 x 0.8 mm Part No. 1-1579007-3 108-18718 � Contact Resistance: Application Specification: ) Mating Cycles are depending on various New State �2 m� technical influences and must be clarified in each individual case. 114-18388 Standard Receptacle Contacts (SRC) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.2–0.5 – 1.1–1.6 -1 1241400 1,800 1241401 500 x-1530002-x 0.5–1.0 – 1.4–2.1 -1 / -3 1241402 1,800 1241403 500 x-1528206-x 2063567-1 >1.0–2.5> – 2.2–3.0 -1 / -3 1241404 2,000 1241405 500 x-1528095-x >2.5–4.0> 3.3–4.5 – -1 / -3 1241406 2,000 1241407 500 x-1528298-x 2119159-1 >4.0–6.0> – 3.4–4.3 -1 1241408 1,800 1241409 500 x-1528895-x Receptacle Contacts Single Wire Sealing System (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.2–0.5 1.3–2.3 1.1–1.6 -1 1241410 1,500 1241411 500 x-1528513-x 2063625-1 0.5–1.0 2.0–2.7 1.4–2.1 -1 / -3 1241412 1,500 1241413 500 x-1528342-x >1.0–2.5> 2.7–3.7 2.2–3.0 -1 / -3 1241414 1,500 1241415 500 x-1528231-x 2063626-1 >2.5–4.0> 4.1–4.5 3.4–3.7 -1 / -3 1241416 1,500 1241417 500 x-1530003-x >4.0–6.0> – 4.0–4.5 -4 1241418 1,500 1241419 500 x-1528947-x 2063627-1 � � ) Material and Finish: xxx-1 = CuNiSi, pre-tin plated ) The pre- and suffix for the xxx-3 = CuNiSi, selective silver plated applicators depends on the xxx-4 = CuNiSi, tin-silver pre- plated applied termination equipment. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-17 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 6.3/4.8K Contact System Chapter 3 – Issued 3-2010. Tab Contacts Tabs 5.8 x 0.8 mm with Steel Top Spring, Mates with 26.5 – 30.5 AMP MCP 6.3/4.8K Contact System 0.38 5.8 Extraction Tool: Part No. 1-1579007-6 1.4 Product Group Drawing: 1241895 Product Specification: 9.5 6.0 108-18064 0.8 Application Specification: 114-18052 1.6 Standard Tab Contacts (STC) Part Numbers Insulation Diameter Wire Size (mm) Material Hand Tool Range � Strip Package Loose- Package and Finish 2 Applicator 539635-1 (mm ) Form Quantity Piece Quantity FLK FLR with Die Set 1-xxx-1 / 1-xxx-2 / 1.5–2.5 2.4–3.7 – 962845 1,700 963740 500 On request 2-xxx-1 / 2-xxx-2 / 1-xxx-1 / 1-xxx-2 / 3.0–4.0 3.3–4.5 – 962846 1,800 963741 500 On request 539759-2 2-xxx-1 / 2-xxx-2 / 1-xxx-1 / 1-xxx-2 / 0.5–1.0 – 1.4–2.1 963734 1,700 963737 500 On request 2-xxx-1 / 2-xxx-2 / �� �� 734688-1 1-xxx-1 / 1-xxx-2 / �� �� 1.5–2.5 – 2.2–3.0 963735 1,800 963738 500 On request 539623-1 2-xxx-1 / 2-xxx-2 / for 2.5 1-xxx-1 / 1-xxx-2 / �� �� > 2.5–4.0 > – 2.7–3.7 963736 1,800 963739 500 On request 539623-1 2-xxx-1 / 2-xxx-2 / 0.2–0.5 – 1.15–1.60 1-xxx-1 / 2-xxx-1 / 965984 2,000 965985 500 – – 4.0–6.0 4.0–5.2 – 1-xxx-1 / 2-xxx-1 / 968050 1,500 968051 500 On request – Tab Contacts Single Wire Sealing System (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Hand Tool Range � Strip Package Loose- Package and Finish 2 Applicator 539635-1 (mm ) Form Quantity Piece Quantity FLK FLR with Die Set 1-xxx-1 / 1-xxx-2 / 0.5–1.0 – 1.4–2.1 962917 1,500 963742 500 On request 2-xxx-1 / 2-xxx-2 / 1-xxx-1 / 1-xxx-2 / 1.5–2.5 – 2.2–3.0 962918 1,500 963743 500 On request 539757-2 2-xxx-1 / 2-xxx-2 / 1-xxx-1 / 1-xxx-2 / > 2.5–4.0 > – 2.7–3.7 962919 1,500 963744 500 On request 2-xxx-1 / 2-xxx-2 / � Remarks: ) Material and Finish: �� ) Hand Tool complete 1-xxx-1 = CuSn, pre-tin plated 2-xxx-1 = CuFe, pre-tin plated 1-xxx-2 = CuSn, selective silver plated 2-xxx-2 = CuFe, selective silver plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-18 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 6.3/4.8K Contact System Chapter 3 – Issued 3-2010. Tab Contacts Tabs 5.8 x 0.8 mm, with Modified Steel Top Spring, 25.2 – 27.2 Mates with AMP MCP 6.3/4.8K Contact System 5.8 0.38 1.6 Extraction Tool: Part No. 1-1579007-6 Product Group Drawing: 1394011 Product Specification: 9.5 6.0 108-18064 0.8 Application Specification: 114-18052 1.6 Standard Tab Contacts with Modified Spring (STC) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.2–0.5 – 1.15–1.60 -1 969007 1,800 969008 500 x-1528296-x 0.5–1.0 – 1.4–2.1 -1 964304 1,800 964303 500 x-1528093-x 2063536-1 > 1.0–2.5 > – 2.2–3.0 -1 / -3 964306 1,900 964305 500 x-1528094-x > 2.5–4.0 > 3.3–4.5 3.3–4.5 -1 964308 1,800 964307 500 x-1530004-x Tab Contacts Single Wire Sealing System with Modified Spring (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.5–1.0 – 1.4–2.1 -1 964310 1,500 964309 500 x-1528437-x > 1.0–2.5 > – 2.2–3.0 -1 964312 1,400 964311 500 x-1528444-x 2063560-1 > 2.5–4.0 > – 2.7–3.7 -1 964314 1,300 964313 500 x-1528439-x � � ) Material and Finish: ) The pre- and suffix for the applicators depends on the xxx-1 = CuFe, pre-tin plated applied termination equipment. xxx-3 = CuSn, selective gold plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-19 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 6.3/4.8K Contact System Chapter 3 – Issued 3-2010. Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for AMP MCP 6.3/4.8K Contact System (Cavity Diameter see below) A � 6.0 8.5 Insulation Diameter Diameter A Package Color Part Number (mm) (mm) Quantity 1.4–2.1 Blue 8.2 963243-1 2,500 2.2–3.0 White 8.2 963244-1 2,500 3.4–3.7 Yellow 8.2 963245-1 2,500 Sealing Plug Black 8.1 100132-1 1,000 Cavity shown from Top (Contact Engaging Side) AMP MCP 6.3/4.8K TAB 5.8 x 0.8 mm TAB 5.8 x 0.8 mm 7.9 7.2 6.9 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-20 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 6.3/4.8K Contact System Chapter 3 – Issued 3-2010. Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for AMP MCP 6.3/4.8K Contact System (Cavity Diameter 8.5 mm) � 6.0 � 9.0 4.3 8.0 Insulation Diameter Package Color Part Number (mm) Quantity 2.0–2.7 White 1394511-1 10,000 3.4–3.7 Blue 1394512-1 10,000 4.0–4.5 Green 1719043-1 10,000 Sealing Plug Transparent 967652-1 20,000 Contact Cavity of Housing for Single Wire Seals and Sealing Plug � 8.5 +1.0 Sealing Plug 1.0 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-21 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 Chapter 3 – Issued 3-2010. Engineering Notes All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-22 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 9.5 Contact System Chapter 3 – Issued 3-2010. Lanceless Receptacle Contacts Technical Features Material: 38.2 Contact: CuNiSi Tabs: CuSn4, CuFe2 Top Spring: Stainless Steel Contact Finish: Tin plated 11.7 Wire Size Range: 2 6.0–10.0 mm Current Carrying Capacity: up to 80 Ampere max. 0.5 (at 20 °C ambient temperature) Temperature Range: –40 °C ... +130 °C (tin plated) � Mating Cycles: up to 10 cycles (tin plated) 6.2 Modular Dimensions (Centerline): 2 6.0–10.0 mm SRC: – 12.7 x 9.5 mm – 12.7 x 8.5 mm (Staggered) Contact Resistance: New State �4 m� Mating Force: Unmating Force: Product Specification: Max. 35 N Max. 15 N 108-18630 Extraction Tool: Extraction possible without tool Application Specification: 114-18269 � ) Mating Cycles are depending on various technical influences and must be clarified in each individual case. Lanceless Receptacle Contacts Part Numbers Insulation Diameter Wire Size (mm) Material Hand Tool Range � Strip Package Loose- Package and Finish 2 Applicator 539783-1 (mm ) Form Quantity Piece Quantity FLK FLR with Die Set 539783-5 for 6 mm 6.0–10.0 4.6–6.6 – 1-xxx-1 1355849 600 – – On request 539783-6 for 10 mm � ) Material and Finish: 1-xxx-1 = CuNiSi, pre-tin plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-23 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 9.5 Contact System Chapter 3 – Issued 3-2010. Receptacle Contacts Technical Features 38.2 Material: Contact: CuNiSi Tabs: CuSn4, CuFe2 Top Spring: Stainless Steel Contact Finish: 11.7 Tin plated, selective silver plated Wire Size Range: max. 0.5 2 2 6.0–10.0 mm , >10.0–16.0 mm Current Carrying Capacity: up to 100 Ampere (at 20 °C ambient temperature) Temperature Range: –40 °C ... +130 °C (tin plated) –40 °C ... +140 °C (silver plated) 6.2 � Mating Cycles: up to 10 cycles (tin plated) up to 50 cycles (silver plated) Modular Dimensions (Centerline): 2 Contact Resistance: Extraction Tool: Product Specification: 6.0–10.0 mm SRC: – 12.7 x 9.5 mm New State �4 m� Part No. 539971-1 108-18630 – 12.7 x 8.5 mm (Staggered) Mating Force: Product Group Drawing: Application Specification: 2 10.0–16.0 mm SRC: Max. 35 N 1355037 for tab 9.5 x 1.2 114-18269 – 12.7 x 10.5 mm (ISO 8092 standard) Unmating Force: – 12.7 x 19.0 mm (Staggered) 1241994 for tab 9.5 x 0.8 2 Max. 15 N 6.0–10.0 mm SWS: – 16.0 x 16.0 mm � – 16.0 x 14.0 mm (Staggered) ) Mating Cycles are depending on various technical influences and must be clarified in each individual case. Standard Receptacle Contacts (SRC) Part Numbers Insulation Diameter Wire Size (mm) Material Hand Tool Range � Strip Package Loose- Package and Finish 2 Applicator 539783-1 (mm ) Form Quantity Piece Quantity FLK FLR with Die Set �� �� 3.0–6.0 4.0–5.2 – 1-xxx-1 1718386 0 600 1719385 500 – – 539783-5 for 6 mm 1-xxx-1 967588 600 929150 500 On request 539783-6 for 10 mm 6.0–10.0 4.6–6.6 – 539783-5 for 6 mm �� �� 1-xxx-1 1241930 0 500 12419380 500 On request 539783-6 for 10 mm >10.0–16.0> 7.1–8.1 – 1-xxx-1 / 1-xxx-2 967589 500 929151 500 On request 539783-7 Receptacle Contacts Single Wire Sealing System (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Hand Tool Range Strip Package Loose- Package and Finish 2 Applicator 539783-1 (mm ) Form Quantity Piece Quantity FLK FLR with Die Set CuNiSi, 539783-8 for 6 mm 6.0–10.0 4.6–6.6 – 1-967590-1 500 1-929152-1 500 On request pre-tin plated 539783-9 for 10 mm CuNiSi, >10.0–16.0> 7.1–8.1 – 1-967591-1 500 1-929153-1 500 On request 1-539783-0 pre-tin plated � �� ) Material and Finish: ) For Tab 9.5 x 0.8 mm 1-xxx-1 = CuNiSi, pre-tin plated 1-xxx-2 = CuNiSi, selective silver plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-24 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 9.5 Contact System Chapter 3 – Issued 3-2010. Tab Contacts Tabs 9.5 x 1.2 mm with Steel Top Spring, 45.5 Mates with AMP MCP 9.5 Contact System 0.58 9.5 Extraction Tool: Part No. 1-1579007-7 18.0 11.2 max. 0.5 1.2 Standard Tab Contacts (STC) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 2.5–4.0 3.3–4.7 – -1 / -2 963764 700 963765 500 On request 734532-1 4.0–6.0 4.0–5.2 – -1 / -2 963766 700 963767 500 6.0–10.0 4.7–6.6 – -1 / -2 / -3 963768 700 963769 500 On request 734533-1 Tab Contacts Single Wire Sealing System (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range � Strip Package Loose- Package and Finish 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 2.5–4.0 4.0–4.5 – -1 / -2 963770 550 963771 500 On request – 4.0–6.0 4.7–5.3 – -1 / -2 963772 550 963773 500 6.0–10.0 6.2–6.6 – -1 / -2 963774 550 963775 500 On request – � ) Material and Finish: -1 = CuSn, pre-tin plated -2 = CuFe, pre-tin plated -3 = CuSn0.15, pre-tin plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-25 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 9.5 Contact System Chapter 3 – Issued 3-2010. Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for AMP MCP 9.5 16.5 Contact System A � 17.5 10.5 Wire Size Insulation Dimension Package Range Diameter Color Part Number A Quantity 2 (mm ) (mm) (mm) 6.0 4.6–5.2 Violet 1355437-1 4,000 10.0 10.0 5.8–6.6 Blue 1355437-2 4,000 10.0 16.0 7.1–8.1 Red 1355437-3 4,000 10.8 – Sealing Plug – – – – Contact Cavity of Housing � 15.0 Sealing Plug All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-26 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP Housing and Connectors Chapter 3 – Issued 3-2010. Introduction The AMP MCP Connector AMP MCP Connectors System offers receptacle and � High reliability status � Wire-to-wire sealed and tab housings with capability supported for long term use unsealed connectors (SWS) for waterproofing and resist- � High vibration level � Wire-to-board sealed and ance to conditions of extreme supported unsealed connectors (SWS) vibration. � Perfect design to avoid � Polarisation, several keyings The system is designed for quality problems, reduce � Locking mechanism for electronic and electrical ap- manufacturing and service smaller connectors/mating plications in motor vehicles, cost aid for higher numbers of where vibrations and mecha- � Integrated secondary ways nical stress, in the long term, locking device delivered in can affect the quality on the pre-locked position contact system. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-27 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 1.5K Receptacle Housings Technical Features No. of Positions: 32 (22+10) Positions Housing Material: 22 Position: PBT/ASA-GF20 10 Position: PBT-GF10 Wire Size Range: 2 AMP MCP 1.5K: 0.2–1.5 mm 2 AMP MCP 2.8K: 0.2–2.5 mm 2 AMP MCP 4.8K: 0.2–4.0 mm Product Specification: 108-18950 29.0 Application Specification: 114-18619-001 96.0 25.0 21.4 23.0 8.7 Receptacle Housings with 22 Pos. and 10 Pos. AMP MCP Part Numbers No. of Keying Housing Receptacle Housing, Receptacle Housing, Cover Mating PCB Header Positions Options Color 22 Positions 10 Positions and Lever Right-Angle Black / Slider Right 1534180-1 1534181-1 1534184-1 1534046-1 22+10 – Black / Slider Left 1534180-2 1534181-1 1534184-2 1534046-1 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-28 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 1.5K Receptacle Housings Technical Features No. of Positions: 32 (22+10) Positions Housing Material: 22 Position: PBT/ASA-GF20 10 Position: PBT-GF10 Wire Size Range: 2 AMP MCP 1.5K: 0.2–1.5 mm 2 AMP MCP 2.8K: 0.2–2.5 mm 2 AMP MCP 4.8K: 0.2–4.0 mm Product Specification: 29.0 108-18950 Application Specification: 114-18619-001 14.0 96.0 25.0 21.4 23.0 8.7 Receptacle Housings with 22 Pos. and 10 Pos. AMP MCP Part Numbers No. of Keying Housing Receptacle Housing, Receptacle Housing, Cover Mating PCB Header Positions Options Color 22 Positions 10 Positions and Lever Right-Angle 22+10 – Black 1534399-1 1534181-1 – 1534046-1 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-29 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 1.5K Receptacle Housings Technical Features No. of Positions: 38 (22+16) Positions Housing Material: 22 Position: PBT/ASA-GF20 10 Position: PBT-GF10 Wire Size Range: 2 AMP MCP 1.5K: 0.2–1.5 mm 2 AMP MCP 2.8K: 0.2–2.5 mm 2 AMP MCP 4.8K: 0.2–4.0 mm Product Specification: 108-18950 29.0 Application Specification: 114-18619-001 96.0 25.0 21.4 16.6 8.7 Receptacle Housings with 22 Pos. AMP MCP + 16 Pos. MQS (Micro Quadlok) Part Numbers No. of Keying Housing Receptacle Housing, Receptacle Housing, Cover Mating PCB Header Positions Options Color 22 Positions 16 Positions and Lever Right-Angle Black / Slider Right 1534180-1 1534579-1 1534184-1 1534531-1 22+16 – Black / Slider Left 1534180-2 1534579-1 1534184-2 1534531-1 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-30 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 1.5K Receptacle Housings Technical Features No. of Positions: 38 (22+16) Positions Housing Material: 22 Position: PBT/ASA-GF20 10 Position: PBT-GF10 Wire Size Range: 2 AMP MCP 1.5K: 0.2–1.5 mm 2 AMP MCP 2.8K: 0.2–2.5 mm 2 AMP MCP 4.8K: 0.2–4.0 mm Product Specification: 108-18950 29.0 Application Specification: 114-18619-001 14.0 96.0 25.0 21.4 16.6 8.7 Receptacle Housings with 22 Pos. AMP MCP + 16 Pos. MQS (Micro Quadlok) Part Numbers No. of Keying Housing Receptacle Housing, Receptacle Housing, Cover Mating PCB Header Positions Options Color 22 Positions 10 Positions and Lever Right-Angle 22+16 – Black 1534399-1 1534579-1 – 1534531-1 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-31 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 1.5K/2.8 Receptacle Housings Technical Features No. of Positions: 12 Positions Assembly 37.7 23.0 Housing Material: PA 66 GF Wire Size Range: 2 4x 2.5 mm FLR Max. 26.7 2 8x 1.5 mm FLR Max. Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-1 dependent on the contact 28.0 12.4 Product Specification: 108-20243 4.7 Application Specification: 4.2 411-20071 5.5 Unsealed Mixed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header A Black 284853-1 1,000 � � 284858-1 with CPA – A 284858-3 Black 284853-2 1,000 without CPA 12 B Gray 284853-3 1,000 � � 284858-2 with CPA – B 284858-4 Gray 284853-4 1,000 without CPA � ) CPA = Connector Position Assurance. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-32 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 1.5K/2.8 Receptacle Housings Technical Features No. of Positions: 20 Positions Assembly 55.0 Housing Material: PA 66 GF Wire Size Range: 2 4x 2.5 mm FLR Max. 2 25.65 16x 1.5 mm FLR Max. Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-1 dependent on the contact 44.8 Product Specification: 108-20243 Application Specification: 411-20071 21.05 23.0 Unsealed Mixed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header A Black 284875-1 600 � � 284879-1 with CPA – A 284879-3 Black 284875-2 600 without CPA 20 B Gray 284875-3 600 � � 284879-2 with CPA – B 284879-4 Gray 284875-4 600 without CPA � ) CPA = Connector Position Assurance. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-33 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 1.5K Receptacle Insert Technical Features No. of Positions: 9 Positions 37.2 4.2 Housing Material: PBT-GF20 Wire Size Range: 2 1.5 mm FLR Max. Product Specification: 23.5 108-18957 Application Specification: 114-18663 AMP MCP 1.5K Receptacle Insert Part Numbers No. of Keying Housing Receptacle Positions Options Color Used with Carrier Insert 1-1718485-1 A Black 1718490-1 1-1718485-2 9 1-1718485-3 B Natural 1718490-2 1-1718485-4 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-34 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 1.5K Receptacle Insert Technical Features No. of Positions: 18 Positions 37.2 8.4 Housing Material: PBT-GF20 Wire Size Range: 2 1.5 mm FLR Max. Product Specification: 23.5 108-18957 Application Specification: 114-18663 AMP MCP 1.5K Receptacle Insert Part Numbers No. of Keying Housing Receptacle Positions Options Color Used with Carrier Insert 1-1718484-1 1-1718484-2 1-1718484-3 1-1718484-4 18 – Black 1718489-1 1-1718485-1 1-1718485-2 1-1718485-3 1-1718485-4 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-35 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 2.8 Receptacle Insert Technical Features No. of Positions: 37.2 8.4 7 Positions Housing Material: PBT-GF20 Wire Size Range: 2 2.5 mm FLR Max. 23.5 Product Specification: 108-18957 Application Specification: 114-18663 AMP MCP 2.8 Receptacle Insert Part Numbers No. of Keying Housing Receptacle Positions Options Color Used with Carrier Insert 1-1718484-1 1-1718484-2 7 – Natural 1718488-1 1-1718484-3 1-1718484-4 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-36 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed (Carrier) Housings for AMP MCP 1.5K Receptacle Inserts Technical Features No. of Positions: 36 Positions Housing Material: PBT/ASA-GF30 27.0 Wire Size Range: 2 1.5 mm FLR Max. with receptacle insert Part No. 1718489 and Part No. 1718490 Product Specification: 45.2 108-18957 Application Specification: 114-18663 29.5 Unsealed (Carrier) Housings for AMP MCP 1.5K Receptacle Inserts Part Numbers No. of Keying Housing Carrier 9 Pos. Insert 9 Pos. Insert Mating Mating Positions Options Color with Lever Key A Key B Tab Housing Tab Header A Brown 1-1718485-1 1-1718492-1 1-1670615-1 � B Purple 1-1718485-2 1-1718492-2 ) 36 1718490-1 1718490-2 � C Emerald Green 1-1718485-3 1-1718492-3 ) � D Water Blue 1-1718485-4 1-1718492-4 ) � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-37 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed (Carrier) Housings for AMP MCP 1.5K and AMP MCP 2.8 Receptacle Inserts Technical Features No. of Positions: 25 Positions Housing Material: PBT/ASA-GF30 27.0 Wire Size Range (with Receptacle Insert): Part No. 1718488-1 2 2.5 mm FLR Max. (7x) Part No. 1718489-1 2 1.5 mm FLR Max. (18x) 45.2 Product Specification: 108-18957 Application Specification: 114-18663 29.5 Unsealed (Carrier) Housings for AMP MCP 1.5K and AMP MCP 2.8 Receptacle Inserts Part Numbers No. of Keying Housing Carrier 7 Position 18 Position Mating Mating Positions Options Color with Lever Insert Insert Tab Housing Tab Header A Brown 1-1718484-1 1-1718491-1 1-1670615-2 � B Purple 1-1718484-2 1-1718491-2 ) 25 1718488-1 1718489-1 � C Emerald Green 1-1718484-3 1-1718491-3 ) � D Water Blue 1-1718484-4 1-1718491-4 ) � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-38 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 2.8 Receptacle Housings with Secondary Locking Technical Features 5.5 No. of Positions: 3–21 Positions Housing Material: PA 66 GF13 16.0 21.0 26.0 31.0 5.0 41.0 Material and Finish 36.0 Headers: CuSn, tin plated Wire Size Range: 2 2.5 mm FLR Max. 2 4.0 mm FLR Max. (3 pos. only) 23.5 26.0 Product Group Drawing: 1355073 for 3–21 positions 28.0 9.7 Product Specification: 27.5 108-18619-3 Application Specification: 6-, 9-, 12-, 15-, 18- 3 Positions, and 21 Positions, 114-18221-3 5.5 Coding A Coding A AMP MCP 2.8 Receptacle Housings with Secondary Locking Part Numbers No. of Keying Housing Receptacle Package Mating Mating PCBHeader Positions Options Color Housing Quantity Tab Housing Right-Angle 3 Black 1-968976-9 – 1-968977-9 �� �� � � 6 Blue 8-968970-1 – 1-965641-1 �� �� � � 9 Yellow 8-968971-1 – 1-967626-1 �� �� � � 12 A Green 8-968972-1 – 1-967627-1 �� �� � � 15 Violet 8-968973-1 – 1-967628-1 � � 18 Gray 8-968974-1 – 1-967629-1 �� �� � � 21 Brown 8-968975-1 – 1-967630-1 3 Gray 2-968976-9 – 2-968977-9 6 Natural 7-968970-1 – 2-965641-1 9 Natural 7-968971-1 – 2-967626-1 6 Pos. 966140-5, Black 12 B Natural 7-968972-1 – 2-967627-1 15 Natural 7-968973-1 – 2-967628-1 9 Pos. 966140-4, Black 18 Natural 7-968974-1 – – 12 Pos. 966140-3, Black 21 Natural 7-968975-1 – 2-967630-1 15 Pos. 966140-2, Black 3 Blue 3-968976-9 – 3-968977-9 18 Pos. 966140-1, Black 6 Blue 6-968970-1 – 3-965641-1 21 Pos. 966140-6, Black 9 Blue 6-968971-1 – 3-967626-1 12 C Blue 6-968972-1 – 3-967627-1 15 Blue 6-968973-1 – 3-967628-1 18 Blue 6-968974-1 – – 21 Blue 6-968975-1 – 3-967630-1 6 Violet 5-968970-1 – 4-965641-1 9 Violet 5-968971-1 – 4-967626-1 12 D Violet 5-968972-1 – 4-967627-1 15 Violet 5-968973-1 – 4-967628-1 18 Violet 5-968974-1 – – �� ) Other colors available. See Product Group Drawing 1355072. �� ) Other colors available. See Product Group Drawing 1355073. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-39 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Receptacle Housings for AMP MCP 2.8 Contacts Technical Features No. of Positions: 4, 6, 10 and 14 Positions 39.2 Housing Material: PBT-GF10 Wire Size Range: 2 4.0 mm FLR Max. 26.25 Extraction Tool: Part No. 929039-1 Interface Drawing: 114-18792 – 4 Positions 114-18793 – 6 Positions 12.9 114-18795 – 10 Positions 114-18754 – 14 Positions n x 6 = (24) Product Specification: 108-94219 Application Specification: –– Receptacle Housings Part Numbers No. of Keying Housing � � � � Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header 4 A Black 1-1670876-1 – 6 A Black 1-1670877-1 – 10 B Natural 2-1670879-1 – –– C Blue 3-1719844-1 – 14 G Orange 7-1719844-1 – H Pink 8-1719844-1 – � ) Other Colors and Codings on request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-40 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 2.8 Receptacle Housings with Secondary Locking Technical Features Applications: Connection to switch No. of Positions: 10 Positions Housing Material: 23.5 PA 66 GF13 Material and Finish Headers: CuSn, tin plated 19.3 Wire Size Range: 33.5 2 2.5 mm FLR Max. 5.5 Product Group Drawing: 1355073 for 3–21 positions Product Specification: 7.4 108-18619-3 Application Specification: 114-18221-3 AMP MCP 2.8 Receptacle Housings with Secondary Locking Part Numbers No. of Keying Housing Receptacle Package Mating Mating PCBHeader Positions Options Color Housing Quantity Tab Housing Right-Angle 10 A Black 1418994-1 – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-41 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 2.8 Receptacle Housings Technical Features Application: 13.97 Connection to tachograph No. of Positions: 16 Positions (2 � 8) Housing Material: 5.08 28.9 PA 66 GF13 Wire Size Range: 2 2.5 mm FLR Max. Extraction Tool: 5.08 23.5 Part No. 1579007-1 28.4 Product Group Drawing: 929092 Product Specification: 108-18619-3 Application Specification: 114-18221-3 AMP MCP 2.8 Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header 2 x 8 – Black 929092-1 – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-42 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 6.3 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 6.3 Receptacle Housings with Secondary Locking Technical Features No. of Positions: 4 Positions Housing Material: PBT-GF10 25.0 Wire Size Range: 2 6.0 mm FLR Max. Extraction Tool: Part No. 1-1579007-3 Product Group Drawing: 24.0 1241438 Product Specification: –– Application Specification: –– 22.8 AMP MCP 6.3 Receptacle Housings with Secondary Locking Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header A Black 1534404-1 – – – 4 B Gray 1534404-2 – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-43 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 9.5 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed AMP MCP 9.5 Receptacle Housings with Secondary Locking Technical Features No. of Positions: 2 Positions Housing Material: PA 66 GF13 35.6 Wire Size Range: 2 10.0 mm FLK Max. Extraction Tool: Part No. 539971-1 Product Specification: –– 30.0 46.0 Application Specification: –– AMP MCP 9.5 Receptacle Housings with Secondary Locking Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header A Black 1355289-1 – 1355290-1 – B Gray 1355289-2 – – – 2 C Blue 1355289-3 – – – D Yellow/Green 1355289-4 – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-44 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 1.5 mm/2.8 mm Tab Housings Technical Features No. of Positions: 12 Positions Assembly 34.8 22.7 Housing Material: PA 66 GF Wire Size Range: 2 4x 2.5 mm FLR Max. 38.7 2 8x 1.5 mm FLR Max. Extraction Tools: Part No. 1-1539960-1 Part No. 1-1579007-6 dependent on the contact 30.0 15.1 Product Specification: 108-20243 Application Specification: 4.7 411-20071 4.2 5.5 Unsealed Tab Housings Part Numbers No. of Keying Housing Tab Package Mating Mating Positions Options Color Housing Quantity Receptacle Housing PCB Header A Panel Hook Black 284858-1 900 284853-1 on Left Side – A 284853-2 Panel Hook Black 284858-3 900 on Right Side 12 B Panel Hook Gray 284858-2 900 284853-3 on Left Side – B 284853-4 Panel Hook Gray 284858-4 900 on Right Side All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-45 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 1.5 mm/2.8 mm Tab Housings Technical Features No. of Positions: 51.6 22.55 20 Positions Assembly Housing Material: PA 66 GF Wire Size Range: 2 4x 2.5 mm FLR Max. 2 16x 1.5 mm FLR Max. 38.7 Extraction Tools: Part No. 1-1539960-1 Part No. 1-1579007-6 dependent on the contact Product Specification: 108-20243 Application Specification: 411-20071 48.8 15.6 Unsealed Tab Housings Part Numbers No. of Keying Housing Tab Package Mating Mating Positions Options Color Housing Quantity Receptacle Housing PCB Header A Panel Hook Black 284879-1 450 284875-1 on Left Side – A 284875-2 Panel Hook Black 284879-3 450 on Right Side 20 B Panel Hook Gray 284879-2 450 284875-3 on Left Side – B 284875-4 Panel Hook Gray 284879-4 450 on Right Side All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-46 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 1.5 mm and 2.8 mm Tab Housings Technical Features No. of Positions: 44.5 25 Positions Housing Material: PBT-GF10 Wire Size Range: 2 7x 2.5 mm FLR Max. 2 18x 1.5 mm FLR Max. 43.1 Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-2 dependent on the contact Product Specification: 108-18957 Application Specification: 114-18663 27.5 Unsealed Tab Housings Part Numbers No. of Keying Housing Mating Tab Positions Options Color Carrier 7 Position 18 Position Housing with Lever Insert Insert A Black 1-1718491-1 1-1718484-1 B Gray 1-1718491-2 1-1718484-2 25 1718488-1 1718489-1 C Light Blue 1-1718491-3 1-1718484-3 D Yellow Green 1-1718491-4 1-1718484-4 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-47 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 1.5 mm and 2.8 mm Tab Housings Technical Features No. of Positions: 44.5 36 Positions Housing Material: PBT-GF10 Wire Size Range: 2 1.5 mm FLR Max. 39.6 Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-2 dependent on the contact Product Specification: 108-18957 Application Specification: 114-18663 27.5 Unsealed Tab Housings Part Numbers No. of Keying Housing Mating Tab Positions Options Color Carrier 9 Pos. Insert 9 Pos. Insert 18 Position Housing with Lever Key A Key B Insert A Brown 1-1718492-1 1-1718484-1 B Purple 1-1718492-2 1-1718484-2 36 1718490-1 1718490-2 1718489-1 C Emerald Green 1-1718492-3 1-1718484-3 D Water Blue 1-1718492-4 1-1718484-4 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-48 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 2.8 mm Tab Housings with Optional Secondary Locking Technical Features 6-, 9-, 12-, 15-, 18- No. of Positions: and 21 Positions, Coding A 3–21 Positions 42.0 Housing Material: PA 66 GF13 Locking Device: PBT ASA-GF30 27.5 3 Positions, Wire Size Range: 35.5 Coding A 2 2.5 mm FLR Max. 12.4 Product Group Drawing: 1355072 for 6–21 positions Product Specification: 5.0 108-18619-3 Application Specification: 27.5 114-18051 5.5 17 .5 22.5 27.5 32.5 37.5 42.5 Unsealed 2.8 mm Tab Housings with Optional Secondary Locking Part Numbers No. of Keying Housing Tab Package Secondary Package Mating Positions Options Color Housing Quantity Locking Device Quantity Receptacle Housing 3 Black 1-968977-9 – 1-968976-9 � � 6 Blue 1-965641-1 – 8-968970-1 � � 9 Yellow 1-967626-1 – 8-968971-1 � � 12 A Green 1-967627-1 – 8-968972-1 6 Position � � 15 Violet 1-967628-1 – Blue: – 8-968973-1 968271-1 � � 18 Gray 1-967629-1 – 8-968974-1 � � 21 Brown 1-967630-1 – 8-968975-1 9 Position 3 Gray 2-968977-9 – 2-968976-9 Yellow: – 6 Natural 2-965641-1 – 7-968970-1 967631-1 9 Natural 2-967626-1 – 7-968971-1 12 B Natural 2-967627-1 – 7-968972-1 12 Position Green: – 15 Natural 2-967628-1 – 7-968973-1 967632-1 18 Natural – – 7-968974-1 21 Natural 2-967630-1 – 7-968975-1 15 Position 3 Blue 3-968977-9 – 3-968976-9 Violet: – 6 Blue 3-965641-1 – 967633-1 6-968970-1 9 Blue 3-967626-1 – 6-968971-1 12 C Blue 3-967627-1 – 18 Position 6-968972-1 Gray: – 15 Blue 3-967628-1 – 6-968973-1 967634-1 18 Blue – – 6-968974-1 21 Blue 3-967630-1 – 6-968975-1 21 Position 6 Violet 4-965641-1 – 5-968970-1 Brown: – 967635-1 9 Violet 4-967626-1 – 5-968971-1 12 D Violet 4-967627-1 – 5-968972-1 15 Violet 4-967628-1 – 5-968973-1 18 Violet – – 5-968974-1 � ) Other colors available. See Product Group Drawing 1355072. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-49 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 2.8 mm Tab Housings for Potential Distribution for Wall or Panel Mounting Technical Features No. of Positions: 44.7 21 Pos. on One Electrical Level 2 x 9 Pos. on Two Electrical Level Housing Material: PBT-GF10 Material and Finish: 22.0 CuSn4, tin plated Product Specification: 108-18879 Application Specification: –– 33.7 Unsealed 2.8 mm Tab Housings for Potential Distribution for Wall or Panel Mounting Part Numbers No. of Keying Housing Tab Package Mating Mating Positions Options Color Housing Quantity Receptacle Housing PCB Header A Brown 1-1394765-1 – 8-968975-1 – 21 B Natural 2-1394765-1 – 7-968975-1 – B Natural 2-1394766-1 – 7-968975-1 – 2 x 9 C Blue 3-1394766-1 – 6-968975-1 – 2 x 9 C Blue 3-1394766-2 – 6-968975-1 – 120 � All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-50 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 2.8 mm Tab Housings for Potential Distribution for Wall or Panel Mounting Technical Features No. of Positions: 44.7 21 Pos. on One Electrical Level Housing Material: PBT-GF10 22.0 Material and Finish: CuSn4, tin plated Product Specification: 108-18879 Application Specification: 62.4 –– 33.7 Unsealed 2.8 mm Tab Housings for Potential Distribution for Wall or Panel Mounting Part Numbers No. of Keying Housing Tab Package Mating Mating Positions Options Color Housing Quantity Receptacle Housing PCB Header 21 A Brown 1534188-1 – 8-968975-1 – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-51 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 9.5 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 9.5 mm Tab Housings with Secondary Locking Technical Features No. of Positions: 2 Positions Housing Material: PA 66 GF13 40.0 Wire Size Range: 2 10.0 mm FLK Max. Extraction Tool: Part No. 1-1579007-7 Product Specification: –– 30.6 66.0 Application Specification: –– Unsealed 9.5 mm Tab Housings with Secondary Locking Part Numbers No. of Keying Housing Tab Package Mating Mating Positions Options Color Housing Quantity Receptacle Housing PCB Header A Black 1355290-1 – 1355289-1 – � B Gray ) – 1355289-2 – 2 � C Blue ) – 1355289-3 – � D Yellow/Green ) – 1355289-4 – � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-52 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 1.5 mm Housings – Printed Circuit Board Headers Technical Features No. of Positions: 92.8 16.3 32 Positions Housing Material: PBT-GF20 18.0 24.3 Material and Finish: CuSn4, tin plated Product Specification: 108-18950 Application Specification: 97.8 114-18619-001 4.0 4.2 4.2 4.95 4.0 5.5 5.5 8.5 32 Positions Printed Circuit Board Headers Part Numbers No. of Keying Housing PCB Header Mating Positions Options Color Right-Angle Receptacle Housing 1534180 32 A Black 1534046-1 1534181 1534399 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-53 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 1.5 mm Housings – Printed Circuit Board Headers Technical Features No. of Positions: 58.5 36 Positions Housing Material: PBT-GF20 Material and Finish: 29.9 CuSn, tin plated Product Specification: 108-18957 Application Specification: –– 27.5 Unsealed 1.5 mm Housings – Printed Circuit Board Headers Part Numbers No. of Housing Vertical Package Mating Positions Color PCB Header Quantity Receptacle Housing 1-1718485-1 +0-1718489-1+ 36 Brown 1-1670615-1 – +0-1718490-1+ +0-1718490-2+ All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-54 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 1.5 mm Housings – Printed Circuit Board Headers Technical Features 92.8 16.3 No. of Positions: 38 Positions Housing Material: PBT-GF20 18.0 24.3 Material and Finish: CuSn4, tin plated CuFe4, tin plated Product Specification: –– 97.8 Application Specification: –– 2.54 4.2 4.2 4.95 2.54 5.5 5.5 8.5 38 Positions Printed Circuit Board Headers Part Numbers No. of Keying Housing PCB Header Mating Positions Options Color Right-Angle Receptacle Housing 1534180 38 A Black 1534531-1 1534579 1534399 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-55 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed Mixed 1.5 mm/2.8 mm Housings – Printed Circuit Board Headers Technical Features No. of Positions: 58.5 25 Positions Housing Material: PBT-GF20 Material and Finish: 29.9 CuSn, tin plated Product Specification: 108-18957 Application Specification: –– 27.5 Unsealed Mixed Housings – Printed Circuit Board Headers Part Numbers No. of Housing Vertical Package Mating Positions Color PCB Header Quantity Receptacle Housing 1-1718485-1 25 Black 1-1670615-2 – +0-1718488-1+ +0-1718489-1+ All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-56 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 2.8 mm Housings – Vertical PC Board Headers Technical Features 20.3 5.0 No. of Positions: 6–21 Positions 5.5 Housing Material: 25.7 PA 66 GF13 Material and Finish Headers: CuSn4, tin plated 30.5 (silver plated on request) Wire Size Range: 2 2.5 mm FLR Max. Product Group Drawing: 966140 Product Specification: 40.0 6-, 9-, 12-, 15-, 18- 108-18619-3 and 21 Positions, Application Specification: Coding A 114-18051 Unsealed 2.8 mm Housings – PC Board Headers Part Numbers No. of Housing � Mating Right-Angle Package Mating Positions Color PCB Header Quantity Receptacle Housing 8-968970-1 Packed in 8-968971-1 plastic anti-static tray 8-968972-1 and corrugated box 8-968973-1 8-968974-1 6 966140-5 8-968975-1 9 966140-4 7-968970-1 �� �� 12 966140-3 7-968971-1 Black – 15 966140-2 7-968972-1 18 966140-1 7-968973-1 �� �� 21 966140-6 7-968974-1 7-968975-1 Packed in 6-968970-1 non anti-static tray 6-968971-1 and corrugated box 6-968972-1 6-968973-1 6 9-966140-5 6-968974-1 9 9-966140-4 6-968975-1 �� �� 12 9-966140-3 5-968970-1 Black – 15 9-966140-2 5-968971-1 18 9-966140-1 5-968972-1 �� �� 21 9-966140-6 5-968973-1 �� ) Silver plated on request. �� ) Other codings available. See Product Group Drawing 966140. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-57 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Unsealed 2.8 mm Housings – Printed Circuit Board Headers Technical Features No. of Positions: 18 Positions Housing Material: PA 66 GF13 5.5 24.7 26.0 31.0 Material and Finish: Part No. 967116-1 CuSn, tin plated Part No. 967116-2 Mating Area: Silver plated 20.7 5.0 Solder Area: Tin plated 27.5 Product Specification: 24.2 108-18619-3 37.7 Application Specification: –– Unsealed 2.8 mm Housings – Printed Circuit Board Headers Part Numbers No. of Housing Vertical Package Mating Positions Color PCB Header Quantity Receptacle Housing 967116-1 18 Black –– 967116-2 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-58 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 2.8 Receptacle Housings Technical Features No. of Positions: 6.0 2 Positions Housing Material: PA 66 GF13 22.7 Wire Size Range: 2 2.5 mm FLR Max. Extraction Tool: Part No. 1579007-1 dependent on the contact 25.0 Product Specification: 108-18699-1 (Rec. Housing) Application Specification: 114-18148-1 (Rec. Housing) 33.0 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header A Black 1-1355200-1 – 1-966867-1 – 2 Natural 2-1355200-1 – 1-966867-2 – B Black 2-1355200-2 – 1-966867-2 – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-59 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed Receptacle Housings for AMP MCP 2.8 mm and Sensor Flat Contacts Technical Features No. of Positions: 2 Positions Housing Material: PA 66 GF13 Wire Size Range: 2 2.5 mm FLR Max. 5.0 Extraction Tool: Part No. 1-1579007-2 Product Specification: 108-18519 Application Specification: –– 35.2 27.8 16.6 Sealed Receptacle Housings for AMP MCP 2.8 and Sensor Flat Contacts Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header A Black 968899-1 – – – B Gray 968899-2 – – – 2 C Natural 968899-3 – – – Z Blue 968899-4 – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-60 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed Receptacle Housings for AMP MCP 2.8 Contacts Technical Features No. of Positions: 16.6 2, 3, 4 and 5 Positions Housing Material: PA 66 GF30 Wire Size Range: 2 2.5 mm FLR Max. 31.75 Extraction Tool: Part No. 929039-1 Interface Drawing: 114-18251-011 Product Specification: 27.8 108-18981 Application Specification: n x 5 –– n = acc. No. of Positions 2/3/4 and 5 Sealed Receptacle Housings Part Numbers No. of Keying Housing � � � � Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header 2 A Black 1-1718626-1 – 3 A Black 1-1718627-1 – –– 4 A Black 1-1718628-1 – 5 A Black 1-1718629-1 – � ) Other Colors and Codings on request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-61 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 9.5 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 9.5 Receptacle Housings Technical Features No. of Positions: 2 Positions Housing Material: PA 66 GF13 Wire Size Range: 2 16.0 mm FLK Max. Extraction Tool: Part No. 539971-1 Product Specification: 59.0 108-18809 Application Specification: 114-18501 56.9 38.0 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header 1394026-2 2 – Black 1355328-1 – – 1394026-1 (with Sealing for Wall Mounting) All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-62 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed Receptacle Housings for AMP MCP 2.8 and Sensor Flat Contacts Technical Features No. of Positions: 3 Positions Housing Material: PA 66 GF13 Wire Size Range: 2 2.5 mm FLR Max. Extraction Tool: 5.0 Part No. 1-1579007-2 Product Specification: 108-18519 Application Specification: –– 35.2 27.6 19.9 Sealed Receptacle Housings for AMP MCP 2.8 and Sensor Flat Contacts Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header A Black 968925-1 – – – B Gray 968925-2 – – – 3 C Natural 968925-3 – – – Z Blue 968925-4 – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-63 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 2.8 Receptacle Housings Technical Features No. of Positions: 5.5 4–6 Positions Housing Material: PBT-GF Wire Size Range: 29.8 2 2.5 mm FLR Max. 5.5 Product Specification: 108-20274 Application Specification: –– 31.5 26.4 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Cover Housing Quantity Tab Housing PCB Header 6 A Gray 1745078-1 400 – – – 4 A Black 1745078-2 400 – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-64 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 2.8 Receptacle Housings Technical Features No. of Positions: 9 Positions Housing Material: PBT-GF Wire Size Range: 38.0 2 2.5 mm FLR Max. Product Specification: 108-15403 Application Specification: 411-15726 Interface Specification: 1801318 28.0 44.0 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Cover Housing Quantity Tab Housing PCB Header Black 1801286-1 – 9 – Gray 1801286-3 – 953717-1 1534238-1 – Purple 1801286-6 – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-65 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 2.8 Receptacle Housings Technical Features No. of Positions: 15 Positions Housing Material: PBT-GF 38.0 Wire Size Range: 2 2.5 mm FLR Max. Product Specification: 108-15403 Application Specification: 411-15726 Interface Specification: 1801287 28.0 59.0 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Cover Housing Quantity Tab Housing PCB Header Black 1801326-1 – Gray 1801326-3 – 15 – Green 1801326-4 –––– Brown 1801326-5 – Purple 1801326-6 – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-66 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 1.5K/2.8 Receptacle Housings Technical Features No. of Positions: 45.8 26.6 12 Positions Housing Material: PA 66 GF Wire Size Range: 2 4x 2.5 mm FLR Max. 34.6 2 8x 1.0 mm FLR Max. Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-1 dependent on the contact 32.0 13.6 Product Specification: 108-20242 5.0 Application Specification: 5.2 411-20073 6.0 Sealed Mixed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header A 284844-1 & 284844-3 Black 284848-1 500 – � � with CPA 1745045-1 A Black 284848-3 500 284844-1 & 284844-3 – 12 without CPA B Gray 284848-2 500 � � 284844-2 with CPA – B 284844-4 Gray 284848-4 500 without CPA � ) CPA = Connector Position Assurance. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-67 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 2.8 Receptacle Housings Technical Features No. of Positions: 10 Positions Housing Material: PBT-GF 34.0 Wire Size Range: 2 2.5 mm FLR Max. Product Specification: 108-18923 51.8 33.5 Application Specification: 114-18631 47.5 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Cover Housing Quantity Tab Housing PCB Header A Black 1718156-1 – 10 1718495-1 – – B Gray 1718156-2 – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-68 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 2.8 Receptacle Housings Technical Features No. of Positions: 16 Positions Housing Material: PBT-GF 34.0 Wire Size Range: 2 2.5 mm FLR Max. Product Specification: 108-18923 66.8 33.5 Application Specification: 114-18631 62.5 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Cover Housing Quantity Tab Housing PCB Header A Black 1718149-1 – 16 1718155-1 – – B Gray 1718149-2 – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-69 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 1.5K/2.8 Receptacle Housings Technical Features No. of Positions: 73.1 35.7 20–24 Positions Housing Material: PA 66 GF Wire Size Range: 34.5 2 8x 2.5 mm FLR Max. 2 16x 1.0 mm FLR Max. Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-1 dependent on the contact 5.4 Product Specification: 5.5 5.0 108-20262 6.0 Application Specification: 411-20100 12.0 Sealed Mixed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Cover Housing Quantity Tab Housing PCB Header A (Slide Right) Black 1745043-1 320 20 – 1745044-1 – A (Slide Left)n Black 1745043-2 320 A (Slide Right) Gray 1745043-3 320 24 – 1745044-2 – A (Slide Left)n Gray 1745043-4 320 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-70 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 2.8 Receptacle Housings Technical Features No. of Positions: 15 Positions Housing Material: 40.0 PBT-GF20 Extraction Tool: Part No. 1579007-1 Wire Size Range: 2 2.5 mm FLR Max. 50.7 37.0 AWG 12 TXL Max. Product Specification: 108-18696 Application Specification: 114-18376 59.2 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Mating Positions Options Color Housing Quantity Tab Housing PCB Header A Black 1-1534126-1 – 1703799-1 � 15 B Natural 2-1534126-1 – 9-1394049-1 ) � C Blue 3-1534126-1 – ) � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-71 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 1.5K/2.8/6.3 Receptacle Housings Technical Features No. of Positions: 22 Positions Housing Material: PBT-GF30 38.6 Wire Size Range: 16x AMP MCP 1.5K 2 1.5 mm FLR Max. 6x AMP MCP 2.8 2 2.5 mm FLR Max. 51.7 37.0 AWG 12 TXL Max. Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-1 dependent on the contact Product Specification: 108-94025 37.0 Application Specification: 114-18993 57.85 Sealed Mixed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Positions Options Color Cover Housing Quantity Tab Housing A Black 1-1823440-2 – 1-1823449-2 � � B Gray )– ) � 18 ) � � C Blue )– ) � � D Green )– ) � A Black 1-1823440-3 – ) � B Gray 2-1823440-3 – ) 22 2112452-1 � C Blue 3-1823440-3 – ) � D Green 4-1823440-3 – ) � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-72 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 2.8 Receptacle Housings Technical Features No. of Positions: 21 Positions Housing Material: PBT-GF20 43.7 Wire Size Range: 2 2.5 mm FLR Max. AWG 12 TXL Max. Extraction Tool: Part No. 1579007-1 60.2 37.0 Product Specification: 108-18696 Application Specification: 114-18376 69.2 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Tab Housing Mating Positions Options Color Cover Housing Quantity with Flange Vertical PCB Header A Black 1-1534127-1 – 1-2112162-1 1534238-1 � � B Natural 2-1534127-1 – ) ) 9-1394050-1 21 � � C Blue 3-1534127-1 – ) ) � � D Violet 4-1534127-1 – ) ) � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-73 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K/2.8/6.3 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 1.5K/2.8/6.3 Receptacle Housings Technical Features No. of Positions: 29 Positions Housing Material: PBT-GF30 43.75 Wire Size Range: 26x AMP MCP 1.5K 2 1.5 mm FLR Max. 2x AMP MCP 2.8 2 2.5 mm FLR Max. 61.5 37.3 1x AMP MCP 4.8K/6.3 2 6.0 mm FLR Max. Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-1 Part No. 1-1579007-3 dependent on the contact Product Specification: 108-94215 Application Specification: 76.5 114-94011 Sealed Mixed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Positions Options Color Cover Housing Quantity Tab Housing A Black 1-1823402-1 – B Gray 2-1823402-1 – � � 29 ) ) C Blue 3-1823402-1 – � D Green )– � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-74 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K/2.8/6.3 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 1.5K/2.8/6.3 Receptacle Housings Technical Features No. of Positions: 26 Positions Housing Material: 41.7 PBT-GF30 Wire Size Range: 12x AMP MCP 1.5K 2 1.5 mm FLR Max. 12x AMP MCP 2.8 78.95 44.0 2 2.5 mm FLR Max. 2x AMP MCP 4.8K/6.3 2 6.0 mm FLR Max. Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-1 Part No. 1-1579007-3 dependent on the contact Product Specification: 108-94214 Application Specification: 92.5 114-94010 Sealed Mixed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Positions Options Color Cover Housing Quantity Tab Housing 1-2112041-1 26 A Black 1-2112035-1 – 2112046-1 1-2112041-2 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-75 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 1.5K Receptacle Housings Technical Features No. of Positions: 46 Positions Housing Material: PBT-GF20 43.5 Extraction Tool: Part No. 1-1579007-1 Wire Size Range: 2 1.5 mm FLR Max. 86.0 34.4 AWG 16 TXL Max. Product Specification: 108-94216 Application Specification: 114-94012 103.0 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Positions Options Color Cover Housing Quantity Tab Header � 46 A Black 1-2112231-1 – 2112233-1 ) � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-76 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 1.5K/2.8 Receptacle Housings Technical Features No. of Positions: 62 Positions Housing Material: 46.0 PBT-GF20 Wire Size Range: 6x AMP MCP 1.5K 2 1.5 mm FLR Max. AWG 16 TXL Max. 102.5 44.0 56x AMP MCP 2.8 2 2.5 mm FLR Max. AWG 12 TXL Max. Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-1 dependent on the contact Product Specification: 108-18946 Application Specification: 114-18660 120.5 Sealed Mixed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCBHeader Positions Options Color Cover Housing Tab Housing Straight 90° Angled A Black 1-1418883-1 1-1718324-1 1-1418362-1 1-1418362-3 62 B Gray 2-1418883-1 1418882-1 2-1718324-1 2-1418362-1 2-1418362-3 C Blue 3-1418883-1 – – – A Black 1-1823498-1 – – – B Gray 2-1823498-1 – – – � � 62 1823500-1 C Blue 3-1823498-1 – – – D Green 4-1823498-1 – – – � ) UL 94 V-0 rated. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-77 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 2.8 Receptacle Housings Technical Features No. of Positions: 39 Positions Housing Material: 46.0 PBT-GF20 Wire Size Range: AMP MCP 2.8 2 2.5 mm FLR Max. AWG 12 TXL Max. 102.5 44.0 Extraction Tool: Part No. 1579007-1 Product Specification: 108-18946 Application Specification: 114-18660 120.5 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCBHeader Positions Options Color Cover Housing Tab Housing Straight 90° Angled 39 E Emerald Green 5-1718321-3 1418882-1 5-1718323-1 5-1418363-1 5-1418363-3 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-78 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 2.8/6.3 Receptacle Housings Technical Features No. of Positions: 31 Positions Housing Material: 46.0 PBT-GF20 Wire Size Range: 27x AMP MCP 2.8 2 2.5 mm FLR Max./ AWG 12 TXL Max. 4x AMP MCP 4.8K/6.3 102.5 44.0 2 6.0 mm FLR Max. Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-3 dependent on the contact Product Specification: 108-18946 Application Specification: 114-18660 120.5 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCBHeader Positions Options Color Cover Housing Tab Housing Straight 90° Angled � � � 31 A Bourdeaux 1-1564297-6 1418882-1 ) ) ) � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-79 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Sealed AMP MCP 1.5K Receptacle Housings Technical Features No. of Positions: 92 Positions Housing Material: 44.15 PBT-GF20 Extraction Tool: Part No. 1-1579007-1 Wire Size Range: 118.0 46.6 2 1.5 mm FLR Max. AWG 16 TXL Max. Product Specification: 108-18893 Application Specification: 114-18598 133.5 Sealed Receptacle Housings Part Numbers No. of Keying Housing Receptacle Package Mating Positions Options Color Cover Housing Quantity Tab Header 92 A Black 1703998-1 – 1703997-1 1-1452228-9 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-80 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 2.8 mm Tab Housings Technical Features No. of Positions: 48.7 15 Positions Housing Material: PBT-GF20 Wire Size Range: 2 2.5 mm FLR Max. AWG 12 TXL Max. Extraction Tool: Part No. 1-1579007-6 Product Specification: 57.2 108-18696 Application Specification: 114-18376 57.0 43.4 Sealed 2.8 mm Tab Housings Part Numbers No. of Keying Housing Tab Locking Mating Positions Options Color Cover Adapter Housing Slide Receptacle Housing A Black 1703799-1 1-1534126-1 � 15 B Natural ) 9-1394049-1 1703806-1 1703804-1 2-1534126-1 � C Blue ) 3-1534126-1 � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-81 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 1.5 mm/2.8 mm Tab Housings Technical Features No. of Positions: 22 Positions 48.4 Housing Material: PBT-GF30 Wire Size Range: 2 1.5 mm FLR Max. 2 2.5 mm FLR Max. AWG 12 TXL Max. Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-6 dependent on the contact Product Specification: 108-94025 Application Specification: 114-18993 49.0 37.6 Sealed Mixed Tab Housings Part Numbers No. of Keying Housing Tab Locking Mating Positions Options Color Cover Adapter Housing Slide Receptacle Housing A Black 1-1823449-2 1-1823440-2 � � � 18 B Gray ) ) 1703806-1 1703804-1 ) � � C Blue ) ) � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-82 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 2.8 mm Tab Housings Technical Features No. of Positions: 66.6 21 Positions Housing Material: PBT-GF30 Wire Size Range: 2 2.5 mm FLR Max. AWG 12 TXL Max. Extraction Tool: Part No. 1-1579007-6 Product Specification: 108-18696 Application Specification: 114-18376 51.55 45.4 Sealed Tab Housings Part Numbers No. of Keying Housing Tab Housing Locking Mating Positions Options Color Cover with Flange Slide Receptacle Housing A Black 1-2112162-1 1-1534127-1 � B Natural ) 2-1534127-1 2112166-1 21 2112167-1 � (2.5 mm) C Blue ) 3-1534127-1 � D Violet ) 4-1534127-1 � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-83 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K/2.8/6.3 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 1.5 mm/2.8 mm/6.3 mm Tab Housings Technical Features No. of Positions: 92.0 26 Positions Housing Material: PBT-GF30 Wire Size Range: 2 12x 1.0 mm FLR Max. 2 12x 2.5 mm FLR Max. AWG 12 TXL Max. 2 4x 6.0 mm FLR Max. Extraction Tools: 77.9 Part No. 1-1579007-1 Part No. 1-1579007-3 Part No. 1-1579007-6 dependent on the contact Product Specification: 108-94214 62.75 Application Specification: 114-94010 50.45 Sealed Mixed Tab Housings Part Numbers No. of Keying Housing Tab Housing Locking Mating Positions Options Color Cover with Flange Slide Receptacle Housing 1-2112045-1 26 A Black 1-2112041-1 1-2112041-2 2112046-1 1-2112035-1 (2.5 mm) All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-84 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 1.5 mm/2.8 mm Tab Housings Technical Features No. of Positions: 113.25 62 Positions Housing Material: PBT-GF20 Wire Size Range: 45.8 2 56x 1.5 mm FLR Max. 2 6x 2.5 mm FLR Max. AWG 12 TXL Max. Extraction Tools: Part No. 1-1579007-1 Part No. 1-1579007-6 dependent on the contact Product Specification: 85.6 108-18946 Application Specification: 114-18660 70.7 Sealed Tab Housings Part Numbers No. of Keying Housing Tab Locking Mating Positions Options Color Cover Adapter Housing Slide Receptacle Housing A Black 1-1718324-1 1-1418883-1 1718329-1 62 B Gray 2-1718324-1 1418882-1 1813123-1 1718328-1 2-1418883-1 1813123-2 C Blue – 3-1418883-1 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-85 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 2.8 mm Tab Housings Technical Features No. of Positions: 113.25 39 Positions Housing Material: PBT-GF20 Wire Size Range: 45.8 2 2.5 mm FLR Max. AWG 12 TXL Max. Extraction Tool: Part No. 1-1579007-6 Product Specification: 108-18946 Application Specification: 85.8 114-18660 70.7 Sealed 2.8 mm Tab Housings Part Numbers No. of Keying Housing Tab Locking Mating Positions Options Color Cover Adapter Housing Slide Receptacle Housing 1718329-1 39 E Emerald Green 5-1718323-1 1418882-1 1813123-1 1718328-1 5-1718321-3 1813123-2 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-86 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 2.8 mm Tab Housings Technical Features No. of Positions: 2 Positions 17.1 Housing Material: PA 66 GF13 Wire Size Range: 2 6.0 2.5 mm FLR Max. Product Specification: 108-18180 (Tab Housing) Application Specification: 114-18131 (Tab Housing) 48.5 70.7 21.8 Sealed Tab Housings Part Numbers No. of Keying Housing Tab Package Mating Mating Positions Options Color Housing Quantity Receptacle Housing PCB Header A Black 1-966867-1 – 1-1355200-1 – 2 B Dark Brown 1-966867-2 – 2-1355200-1 – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-87 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 1.5 mm/2.8 mm Tab Housings Technical Features No. of Positions: 41.8 25.2 12 Positions Housing Material: PA 66 GF Wire Size Range: 2 4x 2.5 mm FLR Max. 2 49.4 8x 1.0 mm FLR Max. Extraction Tools: Part No. 1- 539960-1 Part No. 1-1579007-6 dependent on the contact Product Specification: 34.0 12.6 108-20242 Application Specification: 5.0 411-20073 5.2 6.0 Sealed Tab Housings Part Numbers No. of Keying Housing Tab Package Mating Mating Positions Options Color Housing Quantity Receptacle Housing PCB Header A Panel Hook Black 284844-1 500 284848-1 on Left Side – A 284848-3 Panel Hook Black 284844-3 500 on Right Side 12 B Panel Hook Gray 284844-2 500 284848-2 on Left Side – B 284848-4 Panel Hook Gray 284844-4 500 on Right Side All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-88 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 1.5 mm/2.8 mm Tab Housings Technical Features 42.6 21.5 No. of Positions: 12 Positions Housing Material: PA 66 GF Wire Size Range: 40.5 2 4x 2.5 mm FLR Max. 2 8x 1.5 mm FLR Max. Extraction Tools: Part No. 1- 539960-1 32.5 12.5 Part No. 1-1579007-6 dependent on the contact Product Specification: 5.2 108-20264 5.0 Application Specification: 6.0 –– 33.6 74.8 Sealed Tab Housings Part Numbers No. of Keying Housing Tab Housing Package Mating Mating Positions Options Color with Flange Quantity Receptacle Housing PCB Header 12 A Black 1745045-1 350 284848-1 – All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-89 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K and 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 1.5 mm/2.8 mm Tab Housings Technical Features 34.3 64.6 No. of Positions: 20–24 Positions Housing Material: PA 66 GF Wire Size Range: 49.2 2 8x 2.5 mm FLR Max. 2 16x 1.0 mm FLR Max. Extraction Tools: Part No. 1- 539960-1 Part No. 1-1579007-6 47.0 21.6 dependent on the contact Product Specification: 108-20262 5.4 Application Specification: 5.5 5.0 411-20100 6.0 12.0 Sealed Mixed Tab Housings Part Numbers No. of Keying Housing Tab Housing Package Mating Mating Positions Options Color with Flange Quantity Receptacle Housing PCB Header 1745043-1 20 A Black 1745044-1 225 – 1745043-2 1745043-3 24 A Gray 1745044-2 225 – 1745043-4 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-90 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 9.5 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 9.5 mm Tab Housings Technical Features No. of Positions: 2 Positions 57.6 36.6 Housing Material: PBT-GF13 Wire Size Range: 2 10.0 mm FLK Max. Extraction Tool: Part No. 1-1579007-7 Product Specification: 108-18809 Application Specification: 83.9 114-18501 Sealed 9.5 mm Tab Housings Part Numbers No. of Keying Housing Tab Package Mating Mating Positions Options Color Housing Quantity Receptacle Housing PCB Header 1394026-2 – 2 – Black 1355328-1 – 1394026-1 (with Sealing for Wall Mounting) All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-91 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 2.8 mm Tab Housings – Printed Circuit Board Headers Technical Features No. of Positions: 21 Positions Housing Material: PBT-GF20 44.15 Material and Finish: CuSn, silver plated Product Specification: 108-18696 5.5 Application Specification: 38.0 –– 5.0 63.0 76.0 Sealed Tab Housings – Printed Circuit Board Headers Part Numbers No. of Housing Vertical Package Mating Positions Color PCB Header Quantity Receptacle Housing 21 Black 1534238-1 – 1-1534127-1 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-92 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 2.8 mm Tab Housings – Printed Circuit Board Headers Technical Features No. of Positions: 39 Positions Housing Material: 44.8 PBT-GF20 Material and Finish: CuSn, silver plated Product Specification: 108-18946 Application Specification: 114-18660 57.6 48.0 132.0 Sealed Mixed Tab Housings – Printed Circuit Board Headers Part Numbers No. of Keying Housing Vertical Angled Mating Positions Options Color PCB Header PCB Header Receptacle Housing 39 E Emerald Green 5-1418363-1 5-1418363-3 5-1718321-3 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-93 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K/2.8 Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 1.5 mm/2.8 mm Tab Housings – Printed Circuit Board Headers Technical Features No. of Positions: 62 Positions Housing Material: 44.8 PBT-GF20 Material and Finish: CuSn, silver plated Product Specification: 108-18946 Application Specification: 114-18660 57.6 57.6 132.0 Sealed Mixed Tab Housings – Printed Circuit Board Headers Part Numbers No. of Keying Housing Vertical Angled Mating Positions Options Color PCB Header PCB Header Receptacle Housing A Black 1-1418362-1 1-1418362-3 1-1418883-1 & 1-1823498-1 62 B Gray 2-1418362-1 2-1418362-3 2-1418883-1 & 2-1823498-1 � � C Blue ) ) 3-1418883-1 � ) On request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-94 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 AMP MCP 1.5K Housings and Connectors Chapter 3 – Issued 3-2010. Sealed 1.5 mm Tab Housings – Printed Circuit Board Headers 0No. of Positions: 92 Positions Housing Material: 120.0 PBT-GF20 Material and Finish: CuSn, silver plated Product Specification: 48.0 108-94174 Application Specification: 114-18963 38.3 Sealed Tab Housings – Printed Circuit Board Headers Part Numbers No. of Keying Housing Vertical Package Mating Positions Options Color PCB Header Quantity Receptacle Housing 92 A Black 1-1452228-9 – 1703998-1 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-95 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 Chapter 3 – Issued 3-2010. Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 100132-1 3-20 828922-1 3-14, 3-15 2-962918-1 3-18 1-963743-1 3-18 284844-1 3-67, 3-88 828922-2 3-15 2-962918-2 3-18 1-963743-2 3-18 284844-2 3-67, 3-88 828985-1 3-14 1-962919-1 3-18 2-963743-1 3-18 284844-3 3-67, 3-88 828986-1 3-14 1-962919-2 3-18 2-963743-2 3-18 284844-4 3-67, 3-88 929039-1 3-40, 3-61 2-962919-1 3-18 1-963744-1 3-18 284848-1 3-67, 3-88, 929092-1 3-42 2-962919-2 3-18 1-963744-2 3-18 3-89 1-929150-1 3-24 963243-1 3-20 2-963744-1 3-18 284848-2 3-67, 3-88 1-929151-1 3-24 963244-1 3-20 2-963744-2 3-18 284848-3 3-67, 3-88 1-929151-2 3-24 963245-1 3-20 1-963745-1 3-12 284848-4 3-67, 3-88 1-929152-1 3-24 963292-1 3-15 1-963745-2 3-12 284853-1 3-32, 3-45 1-929153-1 3-24 963293-1 3-15 1-963745-3 3-12 284853-2 3-32, 3-45 953717-1 3-65 963294-1 3-15 2-963745-1 3-12 284853-3 3-32, 3-45 1-962841-1 3-12 963530-1 3-80 2-963745-2 3-12 284853-4 3-32, 3-45 1-962841-2 3-12 963531-1 3-80 2-963745-3 3-12 284858-1 3-32, 3-45 1-962841-3 3-12 1-963734-1 3-18 1-963746-1 3-12 284858-2 3-32, 3-45 2-962841-1 3-12 1-963734-2 3-18 1-963746-2 3-12 284858-3 3-32, 3-45 2-962841-2 3-12 2-963734-1 3-18 1-963746-3 3-12 284858-4 3-32, 3-45 2-962841-3 3-12 2-963734-2 3-18 2-963746-1 3-12 284875-1 3-33, 3-46 1-962842-1 3-12 1-963735-1 3-18 2-963746-2 3-12 284875-2 3-33, 3-46 1-962842-2 3-12 1-963735-2 3-18 2-963746-3 3-12 284875-3 3-33, 3-46 1-962842-3 3-12 2-963735-1 3-18 1-963748-1 3-12 284875-4 3-33, 3-46 2-962842-1 3-12 2-963735-2 3-18 1-963748-2 3-12 284879-1 3-33, 3-46 2-962842-2 3-12 1-963736-1 3-18 1-963748-3 3-12 284879-2 3-33, 3-46 2-962842-3 3-12 1-963736-2 3-18 2-963748-1 3-12 284879-3 3-33, 3-46 1-962845-1 3-18 2-963736-1 3-18 2-963748-2 3-12 284879-4 3-33, 3-46 1-962845-2 3-18 2-963736-2 3-18 2-963748-3 3-12 539623-1 3-18 2-962845-1 3-18 1-963737-1 3-18 1-963749-1 3-12 539635-1 3-18 2-962845-2 3-18 1-963737-2 3-18 1-963749-2 3-12 539663-2 3-70 1-962846-1 3-18 2-963737-1 3-18 1-963749-3 3-12 539757-2 3-18 1-962846-2 3-18 2-963737-2 3-18 2-963749-1 3-12 539759-2 3-18 2-962846-1 3-18 1-963738-1 3-18 2-963749-2 3-12 539783-1 3-23, 3-24 2-962846-2 3-18 1-963738-2 3-18 2-963749-3 3-12 539783-5 3-23, 3-24 1-962915-1 3-12 2-963738-1 3-18 963764-1 3-25 539783-6 3-23, 3-24 1-962915-2 3-12 2-963738-2 3-18 963764-2 3-25 539783-7 3-24 1-962915-3 3-12 1-963739-1 3-18 963765-1 3-25 539783-8 3-24 2-962915-1 3-12 1-963739-2 3-18 963765-2 3-25 539783-9 3-24 2-962915-2 3-12 2-963739-1 3-18 963766-1 3-25 1-539783-0 3-24 2-962915-3 3-12 2-963739-2 3-18 963766-2 3-25 539960-1 3-70, 3-45, 1-962916-1 3-12 1-963740-1 3-18 963767-1 3-25 3-46, 3-88, 1-962916-2 3-12 1-963740-2 3-18 963767-2 3-25 3-89, 3-90 1-962916-3 3-12 2-963740-1 3-18 963768-1 3-25 539971-1 3-24, 3-44, 2-962916-1 3-12 2-963740-2 3-18 963768-2 3-25 3-62 2-962916-2 3-12 1-963741-1 3-18 963768-3 3-25 734532-1 3-25 2-962916-3 3-12 1-963741-2 3-18 963769-1 3-25 734533-1 3-25 1-962917-1 3-18 2-963741-1 3-18 963769-2 3-25 734538-1 3-12 1-962917-2 3-18 2-963741-2 3-18 963769-3 3-25 734688-1 3-18 2-962917-1 3-18 1-963742-1 3-18 963770-1 3-25 828904-1 3-14 2-962917-2 3-18 1-963742-2 3-18 963770-2 3-25 828904-2 3-14 1-962918-1 3-18 2-963742-1 3-18 963771-1 3-25 828905-1 3-14 1-962918-2 3-18 2-963742-2 3-18 963771-2 3-25 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-96 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 Chapter 3 – Issued 3-2010. Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 963772-1 3-25 964267-3 3-70 964313-1 3-19 1-967630-1 3-39, 3-49 963772-2 3-25 964268-1 3-70 964314-1 3-19 2-967630-1 3-39, 3-49 963773-1 3-25 964268-2 3-70 964971-1 3-80 3-967630-1 3-39, 3-49 963773-2 3-25 964268-3 3-70 964972-1 3-80 967631-1 3-49 963774-1 3-25 964269-2 3-70 1-965641-1 3-39, 3-49 967632-1 3-49 963774-2 3-25 964269-3 3-70 2-965641-1 3-39, 3-49 967633-1 3-49 963775-1 3-25 964270-2 3-70 3-965641-1 3-39, 3-49 967634-1 3-49 963775-2 3-25 964270-3 3-70 4-965641-1 3-39, 3-49 967635-1 3-49 1-963860-1 3-12 1-964291-3 3-13 1-965982-1 3-12 967652-1 3-21 1-963860-2 3-12 2-964291-1 3-13 1-965982-3 3-12 1-968050-1 3-18 1-963860-3 3-12 1-964292-3 3-13 1-965983-1 3-12 2-968050-1 3-18 2-963860-1 3-12 2-964292-1 3-13 1-965983-3 3-12 1-968051-1 3-18 2-963860-2 3-12 1-964293-3 3-13 1-965984-1 3-18 2-968051-1 3-18 2-963860-3 3-12 2-964293-1 3-13 2-965984-1 3-18 968271-1 3-49 1-963861-1 3-12 2-964293-2 3-13 1-965985-1 3-18 1-968849-1 3-90 1-963861-2 3-12 1-964294-3 3-13 2-965985-1 3-18 1-968849-2 3-90 1-963861-3 3-12 2-964294-1 3-13 966140-1 3-39, 3-57 1-968849-3 3-90 2-963861-1 3-12 2-964294-2 3-13 966140-2 3-39, 3-57 1-968851-1 3-90 2-963861-2 3-12 1-964295-3 3-13 966140-3 3-39, 3-57 1-968851-2 3-90 2-963861-3 3-12 2-964295-1 3-13 966140-4 3-39, 3-57 1-968851-3 3-90 963898-1 3-60 2-964295-2 3-13 966140-5 3-39, 3-57 1-968853-1 3-90 963898-2 3-60 1-964296-3 3-13 966140-6 3-39, 3-57 1-968853-3 3-90 963898-3 3-60 2-964296-1 3-13 9-966140-1 3-57 1-968855-1 3-90 963899-1 3-60 2-964296-2 3-13 9-966140-2 3-57 1-968855-2 3-90 963899-2 3-60 1-964297-3 3-13 9-966140-3 3-57 1-968855-3 3-90 963899-3 3-60 2-964297-1 3-13 9-966140-4 3-57 1-968857-1 3-90 963900-1 3-60 1-964298-3 3-13 9-966140-5 3-57 1-968857-3 3-90 963900-2 3-60 2-964298-1 3-13 9-966140-6 3-57 1-968859-1 3-90 963900-3 3-60 1-964299-3 3-13 1-966867-1 3-59, 3-87 1-968859-3 3-90 963901-1 3-60 2-964299-1 3-13 1-966867-2 3-59, 3-87 1-968872-1 3-90 963901-2 3-60 4-964299-1 3-13 967116-1 3-58 1-968872-2 3-90 963901-3 3-60 1-964300-3 3-13 967116-2 3-58 1-968872-3 3-90 963902-1 3-60 2-964300-1 3-13 1-967588-1 3-24 1-968873-1 3-90 963902-2 3-60 4-964300-1 3-13 1-967589-1 3-24 1-968873-2 3-90 963902-3 3-60 1-964301-3 3-13 1-967589-2 3-24 1-968873-3 3-90 963903-1 3-60 2-964301-1 3-13 1-967590-1 3-24 1-968874-1 3-90 963903-2 3-60 1-964302-3 3-13 1-967591-1 3-24 1-968874-3 3-90 963903-3 3-60 2-964302-1 3-13 1-967626-1 3-39, 3-49 1-968875-1 3-90 963904-1 3-60 964303-1 3-19 2-967626-1 3-39, 3-49 1-968875-2 3-90 963904-2 3-60 964304-1 3-19 3-967626-1 3-39, 3-49 1-968875-3 3-90 963904-3 3-60 964305-1 3-19 4-967626-1 3-39, 3-49 1-968876-1 3-90 963905-1 3-60 964305-3 3-19 1-967627-1 3-39, 3-49 1-968876-3 3-90 963905-2 3-60 964306-1 3-19 2-967627-1 3-39, 3-49 1-968877-1 3-90 963905-3 3-60 964306-3 3-19 3-967627-1 3-39, 3-49 1-968877-3 3-90 964265-2 3-70 964307-1 3-19 4-967627-1 3-39, 3-49 1-968880-1 3-90 964265-3 3-70 964308-1 3-19 1-967628-1 3-39, 3-49 1-968880-3 3-90 964266-2 3-70 964309-1 3-19 2-967628-1 3-39, 3-49 1-968882-1 3-90 964266-3 3-70 964310-1 3-19 3-967628-1 3-39, 3-49 1-968882-3 3-90 964267-1 3-70 964311-1 3-19 4-967628-1 3-39, 3-49 1-968895-1 3-90 964267-2 3-70 964312-1 3-19 1-967629-1 3-39, 3-49 1-968895-3 3-90 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-97 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 Chapter 3 – Issued 3-2010. Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 1-968896-1 3-90 7-968972-1 3-39, 3-49, 1241376-1 3-40 1241402-1 3-17 1-968896-3 3-90 3-57 1241376-2 3-40 1241402-3 3-17 968899-1 3-60 8-968972-1 3-39, 3-49, 1241377-1 3-40 1241403-1 3-17 968899-2 3-60 3-57 1241377-2 3-40 1241403-3 3-17 968899-3 3-60 5-968973-1 3-39, 3-49, 1241378-1 3-40 1241404-1 3-17 968899-4 3-60 3-57 1241378-2 3-40 1241404-3 3-17 968925-1 3-63 6-968973-1 3-39, 3-49, 1241378-3 3-40 1241405-1 3-17 968925-2 3-63 3-57 1241379-1 3-40 1241405-3 3-17 968925-3 3-63 7-968973-1 3-39, 3-49, 1241379-2 3-40 1241406-1 3-17 968925-4 3-63 3-57 1241379-3 3-40 1241406-3 3-17 1-968946-1 3-12 8-968973-1 3-39, 3-49, 1241380-1 3-40 1241407-1 3-17 1-968946-2 3-12 3-57 1241380-2 3-40 1241407-3 3-17 2-968946-1 3-12 5-968974-1 3-39, 3-49 1241380-3 3-40 1241408-1 3-17 2-968946-2 3-12 6-968974-1 3-39, 3-49, 1-1241380-2 3-40 1241409-1 3-17 3-968946-1 3-12 3-57 1241381-1 3-40 1241410-1 3-17 1-968947-1 3-12 7-968974-1 3-39, 3-49, 1241381-2 3-40 1241411-1 3-17 1-968947-2 3-12 3-57 1241381-3 3-40 1241412-1 3-17 2-968947-1 3-12 8-968974-1 3-39, 3-49, 1-1241381-2 3-40 1241412-3 3-17 2-968947-2 3-12 3-57 1241386-1 3-11 1241413-1 3-17 3-968947-1 3-12 6-968975-1 3-39, 3-49, 1241386-2 3-11 1241413-3 3-17 1-968965-1 3-12 3-50, 3-57 1241387-1 3-11 1241414-1 3-17 1-968965-2 3-12 7-968975-1 3-39, 3-49, 1241387-2 3-11 1241414-3 3-17 2-968965-1 3-12 3-50, 3-57 1241388-1 3-11 1241415-1 3-17 2-968965-2 3-12 8-968975-1 3-39, 3-49, 1241388-2 3-11 1241415-3 3-17 3-50, 3-51, 1241389-1 3-11 1241416-1 3-17 3-968965-1 3-12 1-968966-1 3-12 3-57 1241389-2 3-11 1241416-3 3-17 1-968966-2 3-12 1-968976-9 3-39, 3-49 1241390-1 3-11 1241417-1 3-17 2-968966-1 3-12 2-968976-9 3-39, 3-49 1241390-2 3-11 1241417-3 3-17 2-968966-2 3-12 3-968976-9 3-39, 3-49 1241391-1 3-11 1241418-4 3-17 3-968966-1 3-12 1-968977-9 3-39, 3-49 1241391-2 3-11 1241419-4 3-17 5-968970-1 3-39, 3-49, 2-968977-9 3-39, 3-49 1241392-1 3-11 1241846-1 3-70 3-57 3-968977-9 3-39, 3-49 1241392-2 3-11 1241846-2 3-70 6-968970-1 3-39, 3-49, 969007-1 3-19 1241392-3 3-11 1241846-3 3-70 3-57 969008-1 3-19 1241393-1 3-11 1241847-1 3-70 7-968970-1 3-39, 3-49, 969028-2 3-70 1241393-2 3-11 1241847-2 3-70 3-57 969028-3 3-70 1241393-3 3-11 1241847-3 3-70 8-968970-1 3-39, 3-49, 969029-2 3-70 1241394-1 3-11 1-1241930-1 3-24 3-57 969029-3 3-70 1241394-2 3-11 1-1241938-1 3-24 5-968971-1 3-39, 3-49, 969079-2 3-70 1241394-3 3-11 1-1355200-1 3-59, 3-87 3-57 969079-3 3-70 1241395-1 3-11 2-1355200-1 3-59, 3-87 6-968971-1 3-39, 3-49, 969080-2 3-70 1241395-2 3-11 2-1355200-2 3-59 3-57 969080-3 3-70 1241395-3 3-11 1355289-1 3-44, 3-52 7-968971-1 3-39, 3-49, 1241372-1 3-40 1241396-1 3-11 1355289-2 3-44, 3-52 3-57 1241372-2 3-40 1241396-2 3-11 1355289-3 3-44, 3-52 8-968971-1 3-39, 3-49, 1241373-1 3-40 1241396-3 3-11 1355289-4 3-44, 3-52 3-57 1241373-2 3-40 1241397-1 3-11 1355290-1 3-44, 3-52 5-968972-1 3-39, 3-49, 1241374-1 3-40 1241397-2 3-11 1355328-1 3-62, 3-91 3-57 1241374-2 3-40 1241397-3 3-11 1355437-1 3-26 6-968972-1 3-39, 3-49, 1241375-1 3-40 1241400-1 3-17 1355437-2 3-26 3-57 1241375-2 3-40 1241401-1 3-17 1355437-3 3-26 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-98 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 Chapter 3 – Issued 3-2010. Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 1-1355833-1 3-10 2-1534127-1 3-73, 3-83 1-1579007-6 3-83, 3-84, 1718488-1 3-36, 3-38, 1-1355849-1 3-23 3-1534127-1 3-73, 3-83 3-85, 3-86, 3-47, 3-56 1-1355876-1 3-10 4-1534127-1 3-73, 3-83 3-88, 3-89, 1718489-1 3-35, 3-38, 1-1355877-1 3-10 1534160-1 3-50 3-90 3-47, 3-48, 1-1355880-1 3-10 1534161-1 3-50 1-1579007-7 3-25, 3-51, 3-54, 3-56 1394026-1 3-62, 3-91 1534162-1 3-50 3-91 1718490-1 3-34, 3-37, 1394026-2 3-62, 3-91 1534163-1 3-50 1-1670615-1 3-37, 3-54 3-48, 3-54 9-1394049-1 3-71, 3-81 1534180-1 3-28, 3-30 1-1670615-2 3-38, 3-56 1718490-2 3-34, 3-37, 9-1394050-1 3-73 1534180-2 3-28, 3-30 1-1670876-1 3-40 3-48, 3-54 1394132-1 3-80 1534181-1 3-28, 3-29 1-1670877-1 3-40 1-1718491-1 3-38, 3-47 1394133-1 3-80 1534184-1 3-28, 3-30 2-1670879-1 3-40 1-1718491-2 3-38, 3-47 1394511-1 3-21 1534184-2 3-28, 3-30 1703799-1 3-71, 3-81 1-1718491-3 3-38, 3-47 1394512-1 3-21 1534188-1 3-51 1703804-1 3-81, 3-82 1-1718491-4 3-38, 3-47 1-1394765-1 3-50 1534238-1 3-65, 3-73, 1703806-1 3-81, 3-82 1-1718492-1 3-37, 3-48 2-1394765-1 3-50 3-92 1703997-1 3-80 1-1718492-2 3-37, 3-48 2-1394766-1 3-50 1534334-1 3-40 1703998-1 3-80, 3-95 1-1718492-3 3-37, 3-48 3-1394766-1 3-50 1534335-1 3-40 1718149-1 3-69 1-1718492-4 3-37, 3-48 3-1394766-2 3-50 1534399-1 3-29, 3-31 1718149-2 3-69 1718495-1 3-68 1-1418362-1 3-77, 3-94 1534404-1 3-43 1718155-1 3-69 1718558-1 3-50 1-1418362-3 3-77, 3-94 1534404-2 3-43 1718156-1 3-68 1718559-1 3-50 2-1418362-1 3-77, 3-94 1534531-1 3-30, 3-31, 1718156-2 3-68 1-1718626-1 3-61 2-1418362-3 3-77, 3-94 3-55 5-1718321-3 3-78, 3-86, 1-1718627-1 3-61 5-1418363-1 3-78, 3-93 1534579-1 3-30, 3-31 3-93 1-1718628-1 3-61 5-1418363-3 3-78, 3-93 1-1564297-6 3-79 5-1718323-1 3-78, 3-86 1-1718629-1 3-61 1418408-1 3-50 1-1718324-1 3-77, 3-85 1718705-1 3-80 1579007-1 3-90, 3-11, 1418409-1 3-50 3-32, 3-33, 2-1718324-1 3-77, 3-85 1719043-1 3-21 1418410-1 3-50 3-42, 3-59, 1718328-1 3-85, 3-86 1-1719385-1 3-24 1418411-1 3-50 3-67, 3-70, 1718329-1 3-85, 3-86 3-1719844-1 3-40 1418882-1 3-77, 3-78, 3-71, 3-72, 1-1718386-1 3-24 7-1719844-1 3-40 3-79, 3-85, 3-73, 3-74, 1-1718484-1 3-35, 3-36, 8-1719844-1 3-40 3-86 3-75, 3-77, 3-38, 3-47, 1745043-1 3-70, 3-90 1-1418883-1 3-77, 3-85, 3-78, 3-79 3-48 1745043-2 3-70, 3-90 3-94 1-1579007-1 3-40, 3-50, 1-1718484-2 3-35, 3-36, 1745043-3 3-70, 3-90 2-1418883-1 3-77, 3-85, 3-32, 3-33, 3-38, 3-47, 1745043-4 3-70, 3-90 3-94 3-47, 3-48, 3-48 1745044-1 3-70, 3-90 3-1418883-1 3-77, 3-85, 3-67, 3-70, 1-1718484-3 3-35, 3-36, 1745044-2 3-70, 3-90 3-94 3-72, 3-74, 3-38, 3-47, 1745045-1 3-67, 3-89 1418884-1 3-40 3-75, 3-76, 3-48 1745078-1 3-64 1418884-3 3-40 3-77, 3-80, 1-1718484-4 3-35, 3-36, 1745078-2 3-64 1418885-1 3-40 3-82, 3-84, 3-38, 3-47, 1801286-1 3-65 1418885-3 3-40 3-85 3-48 1801286-3 3-65 1418994-1 3-41 1-1579007-2 3-47, 3-48, 1-1718485-1 3-34, 3-35, 1801286-6 3-65 1-1452228-9 3-80, 3-95 3-60, 3-63 3-37, 3-54, 1801326-1 3-66 1534046-1 3-28, 3-29, 1-1579007-3 3-17, 3-43, 3-56 1801326-3 3-66 3-53 3-74, 3-75, 1-1718485-2 3-34, 3-35, 1801326-4 3-66 1-1534126-1 3-71, 3-81 3-79, 3-84 3-37 1801326-5 3-66 2-1534126-1 3-71, 3-81 1-1579007-6 3-12, 3-13, 1-1718485-3 3-34, 3-35, 1801326-6 3-66 3-1534126-1 3-71, 3-81 3-17, 3-19, 3-37 1813123-1 3-85, 3-86 1-1534127-1 3-73, 3-83, 3-45, 3-46, 1-1718485-4 3-34, 3-35, 1813123-2 3-85, 3-86 3-92 3-81, 3-82 3-37 1-1823402-1 3-74 All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-99 Section Catalog 1307998-2. Revised 12-2009. AMP MCP Interconnection System Main Catalog 1654400-1 Chapter 3 – Issued 3-2010. Numerical Index Part Number Page Part Number Page Part Number Page 2-1823402-1 3-74 2063435-1 3-13 2063626-1 3-17 3-1823402-1 3-74 2063490-1 3-12 2063627-1 3-17 1-1823440-2 3-72, 3-82 2063523-1 3-90 1-2112035-1 3-75, 3-84 1-1823440-3 3-72 2063524-1 3-40, 3-50 1-2112041-1 3-75, 3-84 2-1823440-3 3-72 2063526-1 3-11 1-2112041-2 3-75, 3-84 3-1823440-3 3-72 2063531-1 3-11 1-2112045-1 3-84 4-1823440-3 3-72 2063532-1 3-90 2112046-1 3-75, 3-84 1-1823449-2 3-72, 3-82 2063533-1 3-13 1-2112162-1 3-73, 3-83 1-1823498-1 3-77, 3-94 2063534-1 3-90 2112166-1 3-83 2-1823498-1 3-77, 3-94 2063536-1 3-19 2112167-1 3-83 3-1823498-1 3-77 2063560-1 3-19 1-2112231-1 3-76 4-1823498-1 3-77 2063567-1 3-17 2112233-1 3-76 1823500-1 3-77 2063623-1 3-9 2112452-1 3-72 2063265-1 3-60 2063624-1 3-9 2119158-1 3-90 2063409-1 3-70 2063625-1 3-17 2119159-1 3-17 Disclaimer While Tyco Electronics and its affiliates referenced herein have made every reasonable effort to ensure the accuracy of the information contained in this catalog, Tyco Electronics cannot assure that this information is error free. For this reason, Tyco Electronics does not make any representation or offer any guarantee that such information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information at any time. Tyco Electronics expressly disclaims any implied warranty regarding the information contained herein, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics’ only obligations are those stated in Tyco Electronics’ Standard Terms and Conditions of Sale. Tyco Electronics will in no case be liable for any incidental, indirect or consequential damages arising from or in connection with, including, but not limited to, the sale, resale, use or misuse of its products. Users should rely on their own judgment to evaluate the suitability of a product for a certain purpose and test each product for its intended application. In case of any potential ambiguities or questions, please don’t hesitate to contact us for clarification. www.tycoelectronics.com www.tycoelectronics.com/automotive AMP, AMP MCP, TE (Logo) and Tyco Electronics are trademarks of the Tyco Electronics Group of Companies and its Licensors. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3-100