TE Connectivity Catalog 82012 Revised 4-12 Ribbon Cable Interconnect Solutions Ribbon Cable Interconnect Solutions te.com © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 82012 LUG Printer ?M 04/2012 TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners. Ribbon Cable Interconnect Solutions Ribbon Cable Connector Selection Guide .025" [0.64 mm] .039" [1.00 mm] Cable Pitch Cable Pitch Mates to .078" [2 mm] Mates to .050" x .100" Mates to .100" x .100" Solders to 2-Row Pin Header 2-Row Pin Header x .078" [2 mm] .075" x .100" Grid Grid 2-Row Pin Header 4-Row PCB Layout Pages 10 and 11 Page 15 Grid See 5176264, 5178751 Series and Part Number 1775109 (Not in this Catalog) System 50 Ultra ATA Bus System 50 Receptacles Receptacles Paddleboard Pages 8-11 Pages 13-15 Page 12 2 mm Receptacle Connectors Pages 16 and 17 .050" [1.27 mm] Cable Pitch Mates to .50" x .50" Mates to .050" x .050" Mates to .050" x .050" Micro-MaTch Micro-MaTch Micro-MaTch Solders directly to Female Top Entry, Female Side Entry, Female Top Entry 2.54mm x 1.27mm 215079 Series, 215460 Series, SMD, 188275 Series, Staggered 2 row PCB Connector PCB Connector PCB Connector PCB Footprint Page 8 Page 9 Page 10 Paddle Board Male-on-Wire Male-on-Wire Male-on-Wire Connector, 215083 Series, 215083 Series, 215083 Series, 215570 Series, Page 12 Page 12 Page 12 Page 13 .050" [1.27 mm] Cable Pitch (Continued) Mates to 50" x 50" Mates to 50" x 50" Right-Angle Vertical Headers Headers 50/50 Grid 50/50 Grid Receptacle Receptacle Connector with or Connectors without latch without latch 2 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Connector Selection Guide Ribbon Cable Connector Selection Guide Ribbon Cable Interconnect Solutions Ribbon Cable Connector Selection Guide (Continued) .050" [1.27 mm] Cable Pitch (Continued) Mates to .100" x .100" Mates to .100" x .100" Mates to .100" x .100" Novo Type Female 3-Row Eurocard 2-Row Universal or Socket Connector Type C & R Low-Profile Headers Pages 48-51 See Catalog 82721 Pages 75-96 622 and 636 609 Series Universal I/O EUROLATCH Novo Series Female Female Pin Connectors Receptacles Connectors Socket Connectors Socket Connectors Pages 45 and 46 Page 47 Pages 48-51 Pages 52 and 53 Pages 54 and 55 .050" [1.27 mm] Cable Pitch (Continued) Mates to Solders to 2-Row DIP Sockets .050" x .100" or Solders to PCB 4-Row PCB Footprint .100" x .100" .100" x .300" .100" x .600" Footprint Footprint Footprint 622 and Solder 609 Series TE Connectivity TE Connectivity TE Connectivity 636 Series Transition DIP Plugs DIP Plugs DIP Plugs DIP Plugs DIP Plugs Connectors Page 56 Page 58 Page 59 Page 60 Page 57 Page 61 3 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Introduction Disclaimer While TE has made every reasonable effort to ensure the accuracy of the information in this catalog, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the informa- tion is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information Restriction on the use of Hazardous Substances Getting the Information You Need contained herein at any time without (RoHS) Our comprehensive on-line RoHS Customer Support Center notice. TE expressly disclaims all implied warranties regarding the information provides a forum to answer your questions and support your At TE Connectivity, we’re ready to support your RoHS require- contained herein, including, but not RoHS needs. A RoHS FAQ (Frequently Asked Questions) is ments. We’ve assessed more than 1.5 million end items/com- limited to, any implied warranties of available with links to more detailed information. You can also ponents for RoHS compliance, and issued new part numbers merchantability or fitness for a particular submit RoHS questions and receive a response within 24 hours where any change was required to eliminate the restricted mate- purpose. The dimensions in this catalog during a normal work week. The Support Center also provides: rials. Part numbers in this catalog are identified as: are for reference purposes only and
Cross-Reference from are subject to change without notice. RoHS Compliant — Part numbers in this catalog are RoHS Specifications are subject to change Non-compliant to Compliant Products Compliant, unless marked otherwise. These products comply without notice. Consult TE for the latest with European Union Directive 2002/95/EC as amended 1
Ability to browse RoHS dimensions and design specifications. January 2006 that restricts the use of lead, mercury, cadmium, Compliant Products in our © 2012, 2009, 1999, 1998, 1996, 1995, hexavalent chromium, PBB, and PBDE in certain electrical and on-line catalog RoHS 1993, 1992, 1989, 1988, 1986, 1985, electronic products sold into the EU as of 1 July 2006.
Downloadable Technical Data 1983, 1982, 1977, 1976, 1974 and 1973 Customer NOTE: For purposes of this Catalog, included within the defini- Customer Information Tyco Electronics Corporation. tion of RoHS Compliant are products that are clearly “Out of All Rights Reserved. Presentation Support Scope” of the RoHS Directive such as hand tools and other AMP, AMPLIMITE, AMPMODU, CHAMP,
More detailed information non-electrical accessories. EUROLATCH, TE Connectivity and the regarding the definitions Center TE connectivity (logo) are trademarks NOTE: Information regarding RoHS compliance is provided used above of the TE Connectivity Ltd. family of based on reasonable inquiry of our suppliers and represents our
So whatever your questions when it comes to RoHS, we companies. current actual knowledge based on the information provided by have the answers at www.te.com/leadfree Other logos, product and Company our suppliers. This information is subject to change. For latest names mentioned herein may be compliance status, refer to our website referenced at right. trademarks of their respective owners. 4 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Introduction (Continued) 2 2 Mass termination capabili- Ribbon Cable Solutions are ductor and the .015 [0.38 ] board and board-to-board ties of the ribbon cable available on three separate posts on .050 x .100 [1.27 x interconnections. Its design connectors have helped cable centerline spacings. 2.54] grid. Also available in prevents the traditional make ribbon cable, and They include: paddleboard configurations. failure mode in tin-plated particularly .050 [0.127] connections, fretting corro- .025 [0.64] Centerlines 2.0 mm [.079] ribbon centerline cable, popular sion. An additional position-  System 50 receptacles cable receptacles feature within the Electronics ing spring in the female part  System 50 paddleboards contacts on a true 2.0 mm Industry. The ability to termi- absorbs relative movements  Pin headers [.079 in.] mating grid for nate up to 64 conductors caused by vibrations and 1.0 mm [.039 in.] pitch .039 [1.00] Centerlines simultaneously, without thermal expansion between ribbon cable. Select  2.0 mm receptacles stripping or otherwise pre- male and female contacts. configurations are available  Breakaway pin headers paring the cable, presents By preventing movements between 8 and 50-positions. obvious labor savings. on the contact spot, a gas .050 [1.27] Centerlines Receptacles feature tight connection can be  50/50 Grid connectors Ribbon Cable Connectors insulation displacement guaranteed under all  Micro-MaTch connectors are wire-to-board devices contacts (IDC). circumstances.  Novo Receptacle used to make the transition 50/50 Grid connectors connectors between cable and pc Novo receptacles feature Although AMPMODU 50/50  DIP plugs board circuitry. They find two rows of contacts on Grid Vertical Headers and  EUROLATCH receptacle heavy use within equipment .100 x .100 [2.54 x 2.54] Receptacles are designed connectors per DIN to connect one board to centers on selected sizes for parallel board-to-board 41612 and IEC 603-2 another or one subsystem of 10 thru 64-positions stacking in high density  Pin Headers to another. The connectors and mate with .025 [0.64] applications, Right-angle are also used in input/out- square or round posts. The System 50 ribbon cable board-to-board and cable- put applications, connecting Novo tuning-fork contact receptacles will terminate to-board applications are different pieces of equipment. offers a military-approved cable on .025 [0.64] center- also possible since the design, at an affordable lines. They are available in vertical receptacles also cost. Polarization options select sizes from 20 thru mate with non-latching include military, center and 100-positions, and accept right-angle headers and the military, or dual bar. wire size range 30 AWG vertical headers also mate 2 [0.05 mm ] solid or with non-latching cable con- DIP (Dual In-Line Package) stranded wire and 32 AWG nectors. plugs provide a permanent 2 [0.03 mm ] stranded pvc connection of ribbon cable Micro-Match connectors insulated wire. Housing and to a pc board or mating Miniaturization and the trend cover are made of high tem- to DIP sockets. Using the towards higher density of perature tolerant thermo- same centerline dimensions electronic functions on a plastic material, black, UL as DIP integrated circuits, substrate led to the intro- 94V-0 rated. A single mating DIP plugs offer space duction of Micro-MaTch. The beam, phosphor bronze efficiency and a low profile system offers a range of contact provides the inter- of .253 [6.43]. board and wire connectors, connect between the con- enabling a variety of wire-to- Need more information? Call Technical Support at the numbers listed below. Technical Support is staffed with specialists well versed in all TE products. They can provide you with:  Technical Support  Catalogs  Technical Documents  Product Samples  TE Authorized Distributor Locations 5 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Table of Contents Ribbon Cable Connector Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2, 3 .025 [0.64] Centerline Ribbon Cable Connectors System 50 Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12 Cable-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 9, 12 Board-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 11 Ultra ATA Bus Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-15 .039 [1.00] Centerline Ribbon Cable Connectors 2 mm [.079] Receptacle Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16, 17 AMPMODU 50/50 Grid Connector System Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Board-to-Board Vertical Receptacles and Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Board-to-Board Vertical Receptacles, Double Row, .050 x .050 [1.27 x 1.27] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Board-to-Board Vertical Headers, Double Row, .050 x .050 [1.27 x 1.27] Centers . . . 21 Recommended PC Board Layouts for Vertical Connectors . . . . . . . . . . . . . . . . . . . . . 22 Board-to-Board Right-Angle Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Board-to-Board Right-Angle Headers, Double Row, .050 x .050 [1.27 x 1.27] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Cable-to-Board Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Cable-to-Board Receptacle Connectors, Double Row, .050 x .050 [1.27 x 1.27] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Terminating Covers for Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Application Tooling for Cable Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Technical Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Micro-MaTch Connector System Miniature Connector System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 System Overview/Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Applications (3 Dimensions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Applications (2 Dimensions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Female-on-Board Connector, Top Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Female-on-Board Connector, Side Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Female-on-Board Connector Surface Mount Device (SMD) . . . . . . . . . . . . . . . . . . . . . 36 Male-on-Board Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Male-on-Wire Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Paddle Board Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Crimp On Snap In (COSI) Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Specials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42, 43 Lead Assembly and Sample Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 .050 [1.27] Centerline Ribbon Cable Connectors Universal I/O Pin Connectors without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Universal I/O Pin Connectors with Slotted Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . 46 EUROLATCH Receptacles 64-Position (Three-Row Housings, Two Rows Loaded) . . . . 47 Novo Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48-51 Military Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Center and Military Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . 50 Dual Polarized, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series . . . 52, 53 Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series . . . . . . . . . 54, 55 DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series . . . . . . . . . . . . . . . . . . . . . . . . 56 DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series . . . . . . . . . . . . . . . . . . . . . . . . 57 6 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Table of Contents (Continued) .050 [1.27] Centerline Ribbon Cable Connectors (Continued) DIP Plugs, .100 x .100 [2.54 x 2.54] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 DIP Plugs, .100 x .300 [2.54 x 7.62] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 DIP Plugs, .100 x .600 [2.54 x 15.24] Centers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 4-Row PCB Solder Transition Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 1-Row Horizontal Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Accessories Flexible Pull Tabs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Universal I/O Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Military Polarizers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Keying Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Strain Relief for 622 Series DIP Plugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Pull Loops, Permanent (For Receptacles and Pin Connectors) . . . . . . . . . . . . . . . . . . . 66 Strain Relief for Universal I/O without Mounting Ears . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Strain Relief for 609 Series (Tulip Contact) Female Socket Connectors . . . . . . . . . . . . . 67 Strain Relief for Novo and Ultra ATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Strain Relief for 2 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Strain Relief for 622 and 636 Series Female Socket Connectors . . . . . . . . . . . . . . . . . . 69 Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70-74 Low Profile Headers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75-83 Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76, 77 Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines and “Kinked” Solder Tails for PCB Retention . . . . . . . . . . . . . . . . . . . 78, 79 IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches, Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . 80, 81 IDC Low Profile Ejection Style Pin Headers, Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82, 83 Universal Ejection Style Pin Headers and Pinless Headers Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-86 Universal Ejection Style Pin Headers, ACTION PIN Contacts, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . 87, 88 Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines, Right-Angle . . . . . . . . . . . . . . . . . . . . . . . . . 89-91 Universal Ejection Style Pinless Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92, 93 Universal Ejection Style Pin Headers, with PCT Housing, .100 x .100 [2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End) . . . . . . . . . . . . . . . . 94, 95 Latches for Ejection Style Universal Pin Headers and Pinless Headers . . . . . . . . . . . . . 96 Cable Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97, 98 Part Number Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 7 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable Product Facts  Preassembled housing and cover  One-step termination  End and daisy chain termination  Positive end latching of connector to universal header  Terminates 30 AWG 2 [0.05 mm ] solid or stranded and 32 AWG 2 [0.03 mm ] stranded .025 [0.64] centerline ribbon cable with PVC insulation  Connectors are RoHS compliant  Recognized under the Component Program of the Underwriters R Laboratories, Inc. UL File No. E28476  Certified by the Canadian Standards R Association, The System 50 Ribbon conductors with PVC cable on the .050 x .100 File No. LR 7189 [1.27 x 2.54] grid. The Cable connector is a insulation. contacts are plated with receptacle connector that The housing and cover 30 gold duplex plating. The will terminate ribbon cable are of a high temperature latching feature is located on .025 [0.64] centerlines. tolerant thermoplastic on the receptacle, not the It is available in select sizes (black) with a UL 94V-0 header, and saves board from 10 to 100 positions rating. A phosphor bronze space and eliminates future and will accommodate 30 single mating beam contact problems of “latch height 2 AWG [0.05 mm ] solid or provides the interconnect compatibility.” stranded and 32 AWG between the conductor and 2 the .015 [0.38] square posts [0.03 mm ] stranded 8 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .025 [0.64] Centerline Ribbon Cable Connectors System 50 Cable-to-Board Connectors .025 [0.64] Centerline Ribbon Cable Connectors System 50 Cable-to-Board Connectors Ribbon Cable Interconnect Solutions System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable (Continued) Double Row Receptacle .254 .228 [6.45] [5.79] .580 [14.73] Before Termination A Cover .054 B [1.37] C Latch .100 [2.54] .198 [5.03] .228 [5.80] .246 [6.25] .430 Material and Finish [10.92] Contact .335 Housing — Black thermoplastic, [8.51] UL 94V-0 rated Latches — Stainless steel Housing Contacts — Phosphor bronze, plated .102 30 microinch gold over nickel with tin [2.59] Position #1 in termination area E Indicator F .100 Related Product Data [2.54] .050 Typ. Mateable Connectors — [1.27] D See AMP Catalog 82178 See Part Numbers 104068 and 104069 Dimensions No. of Part Number Series on pages 10 and 11 Pos. ABCD E F Mates with Posts — .015 [0.38] .510 .445 .225 .200 .096 .294 10 2-111196-5 12.95 11.30 5.72 5.08 2.44 7.47 square, .125 [3.18] long, on .050 x .100 [1.27 x 2.54] grid .610 .545 .325 .300 .146 .394 14 2-111196-6 15.49 13.84 8.26 7.62 3.71 10.01 .660 .595 .375 .350 .171 .444 16 2-111196-7 16.76 15.11 9.52 8.89 4.34 11.28 Technical Documents .760 .695 .475 .450 .221 .544 20 1-111196-8 Product Specification 19.30 17.65 12.07 11.43 5.61 13.82 108-1109 .860 .795 .575 .550 .271 .644 24 2-111196-8 20.32 20.19 14.61 13.97 6.88 16.36 Application Specification 114-25029 .910 .845 .625 .600 .296 .694 26 2-111196-9 23.11 21.46 15.88 15.24 7.52 17.63 1.010 .945 .725 .700 .346 .794 30 1-111196-9 25.65 24.00 18.42 17.78 8.79 20.17 1.110 1.045 .825 .800 .396 .894 34 3-111196-0 28.19 26.54 20.96 20.32 10.06 22.71 1.260 1.195 .975 .950 .471 1.044 40 2-111196-0 32.00 30.35 34.54 24.13 11.96 26.52 1.360 1.295 1.075 1.050 .521 1.144 44 3-111196-1 34.54 32.89 27.31 26.67 13.23 29.06 1.510 1.445 1.225 1.200 .596 1.294 50 2-111196-1 38.35 36.70 31.12 30.48 15.14 32.87 1.760 1.695 1.475 1.450 .721 1.544 60 2-111196-2 44.70 43.05 37.47 36.83 18.31 39.22 1.860 1.795 1.575 1.550 .771 1.644 64 3-111196-2 47.24 45.59 40.00 39.37 19.58 41.76 1.960 1.895 1.675 1.650 .821 1.744 68 3-111196-4 49.78 48.13 42.55 41.91 20.85 44.30 2.060 1.995 1.775 1.750 .871 1.844 72 2-111196-3 52.32 50.67 45.08 44.45 22.12 46.84 2.260 2.195 1.975 1.950 .971 2.044 80 3-111196-3 57.40 55.75 50.17 49.53 24.66 51.92 2.760 2.695 2.475 2.450 1.221 2.544 100 2-111196-4 70.10 68.45 62.87 62.23 31.01 64.62 See Application Specification for termination tooling. Note: All part numbers are RoHS compliant. 9 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions System 50 Board-to-Board Connectors, Through-Hole Headers .015 Shrouded, [0.38] Double Row Vertical .390 [9.91] .055* [1.40] .060 [1.52] Circuit Identification 2 Plc. Feature** A .050 Typ. [1.27] .092 [2.34] .100 [2.54] Material and Finish .344 Housing — Black thermoplastic, .284 [8.74] [7.21] UL 94V-0 rated Contacts — Copper alloy, plated .000030 [0.00076] gold in mating area, .000150 [0.00381] tin on solder posts, .100 with entire contact underplated .000050 [2.54] [0.00127] nickel Related Product Data Mateable Receptacles — page 9 Technical Documents Product Specification 108-1093 Application Specification 114-25031 No. of Dim. Part No. of Dim. Part Positions A Number Positions A Number .380 .980 10 5-104068-2 34 6-104068-3 9.65 24.89 .430 1.130 12 5-104068-8 40 5-104068-4 10.92 28.70 .480 1.230 14 5-104068-9 44 6-104068-4 12.19 31.24 .530 1.380 16 6-104068-0 50 5-104068-5 13.46 35.05 .630 1.630 20 5-104068-1 60 5-104068-6 16.00 41.40 .730 1.830 24 6-104068-1 68 6-104068-8 18.54 46.48 .780 1.930 26 6-104068-2 72 6-104068-5 19.81 49.02 .880 2.130 30 5-104068-3 80 6-104068-6 22.35 54.10 2.630 **Point of measurement for gold thickness. 100 6-104068-7 66.80 **Circuit identification feature omitted on 8, 10, 12 and 14 position headers. Note: All part numbers are RoHS compliant. 10 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .025 [0.64] Centerline Ribbon Cable Connectors System 50 Board-to-Board Connectors .025 [0.64] Centerline Ribbon Cable Connectors System 50 Board-to-Board Connectors Ribbon Cable Interconnect Solutions System 50 Board-to-Board Connectors, Through-Hole Headers (Continued) .100 Shrouded, [2.54] Double Row at Post Tips Right-Angle .055* [1.40] .160 [4.06] at Post Tips .540 .408 [13.72] [10.36] Hold down post .060 Circuit Identification [1.52] Feature** 2 Plc. .100 A [2.54] Material and Finish Housing — Black thermoplastic, UL 94V-0 rated Contacts — Copper alloy, plated .000030 [0.00076] gold in mating area, .000150 [0.00381] tin on solder posts, .050 with entire contact underplated .000050 Typ. [1.27] [0.00127] nickel .350 .290 Related Product Data [8.89] [7.37] Mateable Receptacles — page 9 .100 [2.54] Technical Documents Product Specification Note 2 108-1093 Note 1 Application Specification 114-25031 No. of Dim. Part No. of Dim. Part Positions A Number Positions A Number .330 1.130 8 5-104069-8 40 5-104069-6 8.38 28.70 .380 1.380 10 5-104069-4 50 5-104069-2 9.65 35.05 .630 1.630 20 5-104069-1 60 5-104069-7 16.00 41.40 .730 1.830 24 6-104069-2 68 6-104069-8 18.54 46.80 .780 1.930 26 6-104069-3 72 6-104069-6 19.81 49.02 .880 2.130 30 5-104069-5 80 5-104069-3 22.35 54.10 .980 2.630 34 6-104069-4 100 6-104069-7 24.89 66.80 **Point of measurement for gold thickness. **Circuit identification feature omitted on 8, 10, 12 and 14 position headers. Notes: 1. Hold down posts located as shown for 16 through 100 position headers. Notes: 2. Hold down posts located as shown for 8 through 14 and 60 through 100 position headers. Notes: 3. All part numbers are RoHS compliant. 11 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions System 50 Cable-to-Board Connectors, .025 [0.64] Centerline Ribbon Cable A Paddleboard .273 Material and Finish [6.93] .340 (Terminated) .050 Housing — LCP thermoplastic, [8.64] [1.27] UL 94V-0 rated, black (Unterminated) Position 1 .168 Cover — Polyester, UL 94V-0 rated, Indicator [4.27] black .100 Contacts — Phosphor bronze, plated [2.54] .020 .000100 [0.00245] min. tin over .000050 [0.51] .008 .050 .024 .075 [0.00127] min. nickel underplating Typ. Typ. Typ. [0.20] [1.27] [0.61] [1.91] Typ. B .304 .045 [7.72] [1.19] Technical Documents Ref. Product Specification 108-1109 .040 .030 Application Specification [1.02] Standoffs .118 [0.76] 114-25040 [3.00] (Various Locations) B B .050 .031 .050 .031 Typ. Typ. Typ. Typ. [1.27] [0.79] [1.27] [0.79] .304 .304 [7.72] [7.72] .075 .075 Typ. Typ. [1.91] [1.91] Printed Circuit Board Hole Layout #1 Printed Circuit Board Hole Layout #2 Dimensions Dimensions No. of PCB Kinked No. of PCB Kinked Pos. Layout Legs Pos. Layout Legs AB AB .436 .200 1.286 1.050 10 1 5111595-1 44 2 1-5111595-0 11.07 5.08 32.66 26.67 .536 .300 1.336 1.100 14 1 5111595-2 46 1 1-5111595-7 13.61 7.62 33.93 27.94 .586 .350 1.436 1.200 16 2 5111595-3 50 1 1-5111595-1 14.88 8.89 36.47 30.48 .686 .450 1.686 1.450 20 2 5111595-4 60 2 1-5111595-2 17.42 11.43 42.82 36.83 .786 .550 1.786 1.550 24 2 5111595-5 64 2 1-5111595-3 19.96 13.97 45.36 39.37 .836 .600 1.886 1.650 26 1 5111595-6 68 2 1-5111595-9 21.23 15.24 47.90 41.91 .886 .650 1.986 1.750 28 2 2-5111595-0 72 2 1-5111595-4 22.50 16.51 50.44 44.45 .936 .700 2.186 1.950 30 1 5111595-7 80 2 1-5111595-5 23.77 17.78 55.52 40.53 1.036 .800 2.686 2.450 34 1 5111595-8 100 2 1-5111595-6 26.31 20.32 68.22 62.23 1.186 .950 See Application Specification for termination tooling. 40 2 5111595-9 30.12 24.13 Note: All part numbers are RoHS compliant. 12 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .025 [0.64] Centerline Ribbon Cable Connectors System 50 Cable-to-Board Connectors .025 [0.64] Centerline Ribbon Cable Connectors Ultra ATA Bus Connectors Ribbon Cable Interconnect Solutions Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable Product Facts  IDC termination  Backward compatible with current IDE Interfaces  Improved signal integrity: 1 to 1 signal to ground ratio  Improved crosstalk when compared to existing IDE Cable Assembly  Color coded connectors for “System board,” and “Master HDD” and “Slave HDD”  Cable impedance 80 ohms  Up to 3 connectors per cable assembly  15 microinches gold plating  Recognized under the Component Program of the Underwriters R Laboratories, Inc. Ultra ATA is the next genera- The new connectors are UL File No. E28476 tion IDE (Integrated Drive color coded to identify:  Certified by the Electronics) bus. The current 1. system board connector Canadian Standards R IDE bus has a maximum 2. primary or master hard Association, data transfer rate of about drive connector File No. LR 7189 16.5 MB/second. As the bus 3. slave drive connector  Terminates 30 AWG solid or speeds and disk drive per- Standard Issues stranded PVC insulated 80 formances increase, the conductor ribbon cable cable assembly between The Ultra ATA cable per- the motherboard and hard formance specification is drive becomes a limiting part of the Small Form factor in data transfer from Factor Committee No. 8049. the drive. Compaq Computer and Western Digital are the The Ultra ATA connector major sponsors of the and cable assembly from standard. TE provide the customer with improved electrical Contacts Available: performance by creating a  80 position IDC contact 1:1 signal-to-ground ratio. terminations The connector design incor-  40 signal contacts porates an IDC bus bar to  40 ground terminations to common the 40 additional special IDC bus bar ground signals. The cable is .025" centerline PVC ribbon cable. The connector is fully backward compatible with existing 40-position headers with pin 20 removed on motherboards and disk drives. 13 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable (Continued) Related Product Data .420 .492 Strain Relief — Part Number 499252- [10.67] Max. [12.50] 1 Mateable Headers — page 15 Terminated View 2.186 Material & Finish .240 [55.52] [6.10] Housing and Cover — Cover Ground Thermoplastic, UL 94 V-0 rated, color Bus Bar per table .610 Ref. Contacts — Phosphor bronze, plated [15.49] Signal Housing gold per table on mating end, .000050 Contacts [0.00127]min. tin in wire termination Pos. No. 1 area, over .000050 [0.00127] min nickel Indicator Optional Center* on entire contact. Contact Polarizer Bar Technical Documents .100 Product Specification Circuit 20 .100 1.90 [2.54] Molded Shut 108-1740 [2.54] [48.26] Application Specification Color Coded Position 1 Position 1 Position 1 114-40056 Conductor No. 1 See Application Specification for termination tooling. Pin 34 Accessories Conductor Cut per SFF-8049 Strain Relief — page 68 Keying Plug — page 64 Pull Loops — page 66 Pull Tabs — page 63 Configuration A “System” Board “Master” or “Slave” Connector “Primary” Connector Connector Configuration B “System” Board “Slave” “Master” or Connector “Primary” Connector Connector *Center & Military Polarized Military Polarized Connector Type Housing Cover Housing Cover 15μ" Gold 15μ" Gold Color Color Color Color “System” Board 1658619-2 Blue Black 1658618-2 Blue Black “Primary” or “Master” 1658619-1 Black Black 1658618-1 Black Black “Slave” 1658619-3 Gray Black 1658618-3 Gray Black Notes: 1. All connectors are “ODD GROUND” configuration, ie. all odd cable conductors are grounded. “EVEN GROUND” connectors are not available. See Customer Drawings for detailed electrical connection descriptions. 2. All part numbers are RoHS compliant. 14 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .025 [0.64] Centerline Ribbon Cable Connectors Ultra ATA Bus Connectors Odd Gnd .025 [0.64] Centerline Ribbon Cable Connectors Ultra ATA Bus Connectors Ribbon Cable Interconnect Solutions Ultra ATA Bus Connectors, .025 [0.64] Centerline Ribbon Cable (Continued) Universal Headers — Pin 20 Omitted Ultra ATA Compatible Headers Post Housing Latch Part Contact Finish Solder Tail Comments Type Material Type Number (Plating Code) Length .110 Vertical Nylon or PBT Long 5111824-9 D 2.79 .123 Vertical Nylon or PBT Short 6489700-1 B PP 3.12 Legend: PP — Polarization Peg Low Profile Headers — Pin 20 Omitted Post Housing Latch Part Contact Finish Solder Tail Housing Type Material Type Number (Plating Code) Length Color .120 Vertical Nylon None 1888188-1 A Black 3.05 .120 Vertical Nylon None 1888188-2 B Black 3.05 .122 Vertical Nylon 6T None 2-1734161-4 C Black 3.10 .122 Vertical Nylon 6T None 2-1734161-5 C Blue 3.10 .110 Vertical Nylon None 1734162-2 C Black 2.79 .110 Vertical Nylon None 1734162-4 C Blue 2.79 Plating Code A — Duplex plated, gold flash on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel. Plating Code B — Duplex plated, gold flash over palladium-nickel, .000015 [0.00038] min. total on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel or .000015 [0.00038] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel. Plating Code C — Gold flash over nickel underplate on entire post. Plating Code D — Duplex plated, gold flash over palladium-nickel, .000030 [0.00076] min. total on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel or .000015 [0.00038] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel. Note: All part numbers are RoHS compliant. 15 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions 2.0 mm [.079] Receptacle Connectors Product Facts  True hard metric 2.0 x 2.0 [.079 x .079] mating grid for 1.0 [.039] pitch ribbon cable  Wide selection of configurations, 8-50 positions  Insulation displacement (IDC), beryllium copper contacts, duplex plated gold-over-nickel  Top/bottom single beam contact orientation  UL 94V-0 rated thermo- plastic components  Assemblies are furnished preassembled with termination covers  Optional polarization  Optional strain relief available  Connector assemblies packaged for ease of handling and protection  Recognized under the Component Program The 2.0 [.079] receptacle in the mating area and of the Underwriters R connector family features 0.00254 [.000100] min. Laboratories, Inc. contacts on a true 2.0 x 2.0 tin on termination end, all UL File No. E28476 [.079 x .079] mating grid over 0.00127 [.000050]  Certified by the for 1.0 [.039] pitch 28 AWG nickel underplating. Contact Canadian Standards R ribbon cable. A variety of mating area is 1.54 [.061] Association, configurations are available from the face of the housing File No. LR 7189 from 8 through 50 positions. and they accept 0.50mm This small, compact [.0197] round or square connector is finding wide posts. Performance Data acceptance throughout the Durability — 150 cycles Housings are made of electronic industry, particu- UL 94V-0 rated polyester Termination Resistance — larly in the smaller laptop 25 milliohms max. with optional center bar and notebook type comput- polarization. Complete Mating Force — ers with 63.5 [2.5] drives. 1.67 N max. per contact assemblies are furnished Other areas of application preassembled with termina- Unmating Force — include point-of-sale termi- 0.14 N min. per contact tion covers. The complete nals, fax machines, photo- assembly presents a com- Operating Temperature — copiers, printers, consumer -65°C to +105°C pact design only 5.2 [.203] electronics, and other com- wide over the termination Technical Documents puter peripheral equipment. cover by 4 [.157] deep by Product Specification These receptacles feature 4 [.157] wide mating end. 108-1372 insulation displacement Terminated height is 8.48 Application Specification contacts (IDC) with a [.334]. Optional strain relief 114-40038 top/bottom single-beam available. Assemblies are contact orientation. packaged for ease of Contacts are beryllium handling and protection. copper, duplex plated 0.00076 [.000030] gold 16 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .039 [1.00] Centerline Ribbon Cable Connectors .079 [2.00] Receptacle Connectors .039 [1.00] Centerline Ribbon Cable Connectors .079 [2.00] Receptacle Connectors METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions 2.0 mm [.079] Receptacle Connectors, Non-Polarized and Center Polarized Bar Material and Finish A Housing and Termination Cover — UL 94V-0 rated polyester, black 5.16 Contacts — Beryllium copper, duplex [.203] plated 0.00076 [.000030] min. gold on mating end, 0.00013 [.000005] min. Optional Center Polarizer Bar gold on termination end, all underplated 0.00127 [.000050] min. nickel 2 Note: Accepts 0.08-0.09mm [28 AWG] ribbon cable, PVC insulated 1.00 [.039] pitch. See Application Specification for details. 1.54 10.24 [.061] [.403] Technical Documents Product Specification 108-1372 5.00 4.000 Position Number [.197] [.1575] 1 Indicator Application Specification 114-40038 B Mateable Connectors — pages 9 and 12, or see Application Specification Position Number 1 ± 0.05 1.90 for header requirements ± .002 2.00 [.075 ] [.079] Typ. Accessories 8.48 [.334] Pull Loops — page 66 Keying Plugs — page 64 2.00 [.079] Strain Relief — page 68 Typ. Terminated View,Typical Dimensions No. of Center Non-Polarized Positions Polarized AB 13.18 8.41 8 3-111623-0 2-111626-4 .519 .331 15.16 10.41 10 1-111623-8 1-111626-7 .597 .410 17.15 12.40 12 3-111623-1 — .675 .488 19.18 14.40 14 1-111623-9 1-111626-8 .755 .567 21.18 16.41 16 2-111623-0 2-111626-5 .834 .646 25.17 20.40 20 2-111623-1 1-111626-9 .991 803 27.18 22.40 22 2-111623-9 — 1.070 .882 29.18 24.41 24 2-111623-7 2-111626-6 1.149 .961 31.17 26.42 26 2-111623-2 2-111626-7 1.227 1.040 35.18 30.40 30 2-111623-3 — 1.385 1.197 39.17 34.42 34 2-111623-8 2-111626-0 1.542 1.355 45.19 40.41 40 2-111623-4 2-111626-1 1.779 1.591 49.17 44.40 44 2-111623-5 2-111626-2 1.936 1.748 55.17 50.39 50 2-111623-6 2-111626-3 2.172 1.984 Note: All part numbers are RoHS compliant. 17 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions AMPMODU 50/50 Grid Connector System Right-Angle Headers, Board-to-Board (Page 24) Vertical Headers, Board-to-Board (Page 21) Receptacles, Cable-to-Board, With Latch (Page 26) Vertical Receptacles, Board-to-Board (Page 20) Receptacles, Cable-to-Board Without Latch Vertical Headers, (Page 26) Board-to-Board (Page 21) Vertical Headers, Board-to-Board (Page 21): .250 [6.35] Stack Height .320 [8.13] Stack Height .390 [9.91] Stack Height Vertical Receptacles, Board-to-Board (Page 20) Produced under a Quality Management System certified to ISO 9001 A copy of the certificate is available upon request. 18 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 ISO 9001 Certified Board-to-Board Vertical Receptacles and Headers Board-to-Board Vertical Receptacles and Headers Ribbon Cable Interconnect Solutions Board-to-Board Vertical Receptacles and Headers Product Facts  Surface-mount products for parallel board-to-board applications, as well as right-angle board-to-board and cable-to-board applications  High density .050 x .050 [1.27x1.27] centerline grid  Three board-to-board stack heights: .250 [6.35], .320 [8.13] and .390 [9.91]  Non-protrusive metallic holddowns  Reliable dual beam receptacle contacts for redundant contact  Duplex plated receptacle and post contacts; gold plated on mating areas, tin plated on tails  Compatible with standard surface-mount processing (VPR and IR)  Receptacle and header allow for drainage of AMPMODU 50/50 Grid PC boards and allow holddown characteristics processing fluids Vertical Headers and surface mounting to both and packaging methods  Tape and reel packaging Receptacles are designed sides of the board. In result in a system that is available. Contact for parallel board-to-board addition to providing compatible with robotic TE for details stacking in high density retention during processing, assembly.  Polarized header and applications. the holddowns are soldered The headers and receptacles receptacle assemblies during reflow and therefore Right-angle board-to-board feature polarization to provide  Sizes of 10, 20, 30, 40, 50, and cable-to-board prevent misalignment. long-term strain relief for 60, 70, 80 and 100 positions applications are also the solder joints. Three Board Stack Heights possible, since the vertical  Recognized under the receptacles also mate with AMPMODU 50/50 Grid Component Program of non-latching right-angle Vertical Headers and Underwriters headers (page 24) and the Receptacles are designed Laboratories Inc., .250±.006 R vertical headers also mate to be compatible with File No. E28476 [6.35±0.15] with non-latching cable standard surface-mount  Certified by connectors. processes; IR (infrared) and Canadian Standards VPR (vapor phase reflow). Association Available are double row, R The surface-mount File No. LR7189 vertical shrouded headers connectors have been and receptacles in sizes designed so that ranging from 10 through dimensioning, tolerances, 100 positions (in 10 position .320±.006 referenced datums, increments). [8.13±0.15] Parallel board-to-board stack heights of .250 [6.35], Non-Protrusive .320 [8.13] and .390 [9.91] Metallic Holddowns are achievable by selection of the appropriate header. The receptacle is the same for all three stack height headers. .390±.006 [9.91±0.15] Non-protrusive metallic holddowns are designed for use in .062 [1.57] or thicker 19 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Board-to-Board Vertical Receptacles, Double Row, .050 x .050 [1.27 x 1.27] Centerline A .028 .120 [0.71] [3.05] .050 Material and Finish [1.27] Housing—Glass-filled thermoplastic, black, 94V-0 rated Polarizing Tab Contacts—Copper alloy; duplex plated (For Polarization to Mating Header) .000030 [0.00076] gold in mating area, .000150 [0.00381] tin on solder tail, with entire contact underplated .000050 [0.00127] nickel Holddown—Copper alloy; plated .187 .050 .000150 [0.00381] tin over .000050 [4.75] [1.27] [0.00127] nickel .050 [1.27] Related Product Data Mating Headers — pages 21 and 24 PC Board Layouts — page 22 Performance Specifications — page 29 Technical Documents — page 29 Product Specification 108-1332 Application Specification Receptacle 114-7010 No. of Dimension Part Numbers Pos. A Packaging — Tube or Tape and Reel Tube Tape and Reel* No Hold Down w/Vacuum Cover 10 .266 [6.75] 5-104652-1 5-147384-1 5-147413-1 20 .516 [13.11] 5-104652-2 5-147384-2 5-147413-3 30 .766 [19.46] 5-104652-3 5-147384-3 5-147413-4 40 1.016 [25.81] 5-104652-4 5-147384-4 — 50 1.266 [32.16] 5-104652-5 5-147384-5 5-147413-2 60 1.516 [38.51] 5-104652-6 5-147384-6 — 70 1.766 [44.86] 5-104652-7 5-147384-7 — 80 2.016 [51.21] 5-104652-8 5-147384-8 — 100 2.516 [63.91] 6-104652-0 5-147384-9 — * Parts packaged in tape and reel have vacuum pick and place cover. See PC Board Layout on page 22. Note: All part numbers are RoHS compliant. 20 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Vertical Receptacles, Double Row Vertical Headers, Double Row Ribbon Cable Interconnect Solutions Board-to-Board Vertical Headers, Double Row, .050 x .050 [1.27 x 1.27] Centerline .050 [1.27] .225 [5.71] .050 [1.27] A .2255 [5.728] For .250 [6.35] Mated Height .050 .030 [1.27] [0.76] A For .320 [8.13] Mated Height .2975 [7.557] .030 .050 [0.76] [1.27] A .3675 [9.335] For .390 [9.91] Mated Height .050 .030 [1.27] [0.76] Material and Finish Related Product Data Technical Documents — page 29 Housing—Glass-filled thermoplastic, Mating Receptacles — pages 20 and Product Specification 108-1332 black, 94V-0 rated 26 (without latch only) Application Specification Contacts—Copper alloy; duplex plated PC Board Layouts — page 22 114-7010 .000030 [0.00076] gold in mating area, Performance Specifications — page Packaging — Tube or Tape and Reel .000150 [0.00381] tin on solder tail, 29 with entire contact underplated .000050 [0.00127] nickel Holddown—Copper alloy; plated .000150 [0.00381] tin over .000050 [0.00127] nickel Header Part Numbers .250 [6.35] Mated Height .320 [8.13] Mated Height .390 [9.91] Mated Height No. of Dimension Pos. A Tape & Reel* Tubes Tubes Tubes Tape & Reel* Tape & Reel* Hold Down No Hold Down Hold Down No Hold Down 10 .372 [9.44] 5-104655-1 5-147381-1 5-147121-1 5-104656-1 5-147382-1 5-104693-1 — 5-147383-1 20 .622 [15.79] 5-104655-3 5-147381-2 5-147121-2 5-104656-2 5-147382-2 5-104693-2 — 5-147383-2 30 .872 [22.14] 5-104655-4 5-147381-3 — 5-104656-3 5-147382-3 5-104693-3 — 5-147383-3 40 1.122 [28.49] 5-104655-5 5-147381-4 — 5-104656-4 5-147382-4 5-104693-4 — 5-147383-4 50 1.372 [34.84] 5-104655-6 5-147381-5 — 5-104656-5 5-147382-5 5-104693-5 — 5-147383-5 60 1.622 [41.19] 5-104655-7 5-147381-6 — 5-104656-6 5-147382-6 5-104693-6 — 5-147383-6 70 1.872 [47.54] 5-104655-8 5-147381-7 — 5-104656-7 5-147382-7 5-104693-7 — 5-147383-7 80 2.122 [53.89] 5-104655-9 5-147381-8 — 5-104656-8 5-147382-8 5-104693-8 — 5-147383-8 90 2.372 [60.24] ——— 5-104656-9 — 5-104693-9 —— 100 2.622 [66.59] 6-104655-1 5-147381-9 — 6-104656-0 5-147382-9 6-104693-0 5-147503-1 5-147383-9 *Parts packaged in tape and reel have vacuum pick and place cover. See PC Board Layout on page 22. Note: All part numbers are RoHS compliant. 21 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Recommended PC Board Layouts for Vertical Connectors Headers .029 [0.74] .050 [1.27] B Spaces at .050 [1.27] = C .162 [4.11] .010 [0.25] 4 Plc. C of Pattern L Detail A .182 .047 [4.62] [1.19] .091 .061 2 Plc. [2.31] [1.54] Detail A D Receptacles .029 [0.74] .050 [1.27] .110 B Spaces at .050 [1.27] = C [2.79] C of Pattern L .130 [3.30] Detail A .065 [1.65] .060 [1.52] D Receptacle Dimensions Header Dimensions No. of Pos. BC D B C D 10 4 .200 [5.08] .320 [8.12] 4 .200 [5.08] .322 [8.17] 20 9 .450 [11.43] .570 [14.48] 9 .450 [11.43] .572 [14.52] 30 14 .700 [17.78] .820 [20.83] 14 .700 [17.78] .822 [20.87] 40 19 .950 [24.13] 1.070 [27.19] 19 .950 [24.13] 1.072 [27.22] 50 24 1.200 [30.48] 1.320 [33.53] 24 1.200 [30.48] 1.322 [33.57] 60 29 1.450 [36.83] 1.570 [39.88] 29 1.450 [36.83] 1.572 [39.92] 70 34 1.700 [43.18] 1.820 [46.23] 34 1.700 [43.18] 1.822 [46.27] 80 39 1.950 [49.53] 2.070 [52.58] 39 1.950 [49.53] 2.072 [52.62] 90 44 2.200 [55.88] 2.320 [58.93] 44 2.200 [55.88] 2.322 [58.97] 100 49 2.450 [62.23] 2.570 [65.28] 49 2.450 [62.23] 2.572 [65.32] Note: Refer to TE Customer Drawings for additional PC board layout information and dimensional tolerances. 22 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Recommended PC Board Layouts Board-to-Board Right-Angle Headers Ribbon Cable Interconnect Solutions Board-to-Board Right-Angle Headers Product Facts  Surface-mount products for right-angle board-to-board and cable-to-board applications  Double-row, right-angle shrouded headers  High density .050 x .050 [1.27 x 1.27] centerline grid  Latching and non-latching versions available  Non-protrusive metallic holddowns  Metallic tabs, when soldered to PC board pad, provide added mechanical support  Duplex plated post contacts; gold plated on mating area, tin plated on tails  Compatible with standard surface-mount processing (VPR and IR)  Standoffs on header housings allow for drainage AMPMODU 50/50 Grid design as those used in the of processing fluids Right-Angle Headers will vertical headers (page 21)  All headers are polarized accommodate a variety of and receptacles (page 20).  Sizes of 10, 20, 30, 40, 50, high density packaging There are also metallic tabs 60, 70, 80 and 100 positions applications; right-angle that are soldered to the sur- board-to-board applications faces of the PC board pads  Recognized under the when mated with vertical for added support. Component Program of receptacles (page 20) and Underwriters AMPMODU 50/50 Grid right-angle cable-to-board R Laboratories Inc., Right-Angle Headers are applications when mated File No. E28476 available in double-row, in with cable connectors either latching or non-  Certified by Canadian (page 26). The small latching versions, and in Standards .050 x .050 [1.27 x 1.27] sizes ranging from 10 Association R centerline contact spacing through 100 positions (in 10 File No. LR7189 allows efficient use of the position increments). The PC board area. latching version provides Mechanical support of the positive retention when headers to the PC board is mated with the latching provided by non-protrusive cable connector (page 26). metallic holddowns All headers feature polariza- designed for .062 [1.57] or tion to help prevent mis- thicker PC boards. These alignment during mating. holddowns are of the same 23 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Board-to-Board Right-Angle Headers, Double Row, .050 x .050 [1.27 x 1.27] Centerline Non-Latching Header A .050 [1.27] Typ. .050 [1.27] .213 [5.41] Latching Header .352 .050 [8.94] [1.27] .430 [10.92] .029 [0.74] .047 Dia Typ [1.19] Material and Finish Plated-Thru Hole .065 (2 Plc) [1.65] B Spaces at Housing — Liquid crystal polymer, Typ. .025 black, 94V-0 rated = C [0.64] .140 Contacts — Copper alloy; duplex [3.56] plated .000030 [0.00076] gold in mating area, .000150 [0.000381] tin on solder tail, with entire contact under- .085 .340 .305 plated .000050 [0.00127] nickel [2.16] [8.64] [7.75] Holddown — Copper alloy; plated .0000150 [0.00381] tin over .000050 .190 [0.00127] nickel [4.83] .175 (2 Plc) [4.45] .063 .100 [1.57] [2.54] .136 Related Product Data (2 Plc) Min [3.45] Mating Receptacles — pages 20 (2 Plc) D and 26 Recommended PC Board Layout Performance Specifications — Note: Refer to TE Customer Drawings for additional PC board page 29 layout information and dimensional tolerances. Technical Documents — page 29 Product Specification 108-1443 Application Specification 114-7010 Header Dimensions No. of Part Numbers Packaging — Tube Pos. AB C D Latching Non-Latching 10 .630 [16.00] 9 .225 [5.72] .550 [13.97] 5-104895-1 5-104894-1 20 .880 [22.35] 19 .475 [12.07] .800 [20.32] 5-104895-2 5-104894-2 30 1.130 [28.70] 29 .725 [18.42] 1.050 [26.67] 5-104895-3 5-104894-3 40 1.380 [35.05] 39 .975 [24.77] 1.300 [33.02] 5-104895-4 5-104894-4 50 1.630 [41.40] 49 1.225 [31.12] 1.550 [39.37] 5-104895-5 5-104894-5 60 1.880 [47.75] 59 1.475 [37.47] 1.800 [45.72] 5-104895-6 5-104894-6 70 2.130 [54.10] 69 1.725 [43.82] 2.050 [52.07] 5-104895-7 5-104894-7 80 2.380 [60.45] 79 1.975 [50.17] 2.300 [58.42] 5-104895-8 5-104894-8 100 2.880 [73.15] 99 2.475 [62.87] 2.800 [71.12] 6-104895-0 6-104894-0 Note: All part numbers are RoHS compliant. 24 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Right-Angle Headers, Double Row, Latching and Non-Latching Cable-to-Board Connectors Ribbon Cable Interconnect Solutions Cable-to-Board Connectors Product Facts  Double-row receptacle connectors provide cable- to-board connection capabilities for vertical headers (non-latching) and right-angle headers (latching and non-latching)  IDC (Insulation Displacement Crimp) mass termination of solid or stranded round conductor .050 [1.27] centerline ribbon cable with PVC or polyethylene insulation  Accommodates ribbon cable conductor sizes of 28 AWG 2 [0.08-0.09 mm ] and 30 2 AWG [0.05 mm ] and insulation diameters up to .036 [0.91] maximum  Reliable single beam receptacle contact design  Duplex plated receptacle contacts; gold plated in mating area, tin in These double-row cable stranded round conductor mounted right-angle header. termination area connectors, with a .050 x ribbon cable with conductor The cable connector without  Terminating covers (sold .050 [1.27 x 1.27] centerline sizes of 28 AWG [0.08-0.09 a metal latch features separately) provide both 2 contact spacing, provide mm ] and 30 AWG [0.05 polarization to help prevent strain relief and protection 2 cable-to-board connection mm ] and a maximum mismating. All connectors to the termination area capabilities for the insulation diameter of .036 are available in sizes  Sizes of 10, 20, 30, 40, 50, AMPMODU 50/50 Grid [0.91]. During termination, ranging from 10 through 60, 70, 80 and 100 positions Connector System. Cable the terminating covers, 100 positions (in 10 position  Connectors available with or connectors without a latch which must be purchased increments). without metal latch will mate with the vertical separately, assist in guiding headers (page 21), while the wire into the IDC  Connectors without latches cable connectors with or contacts, then provide are polarized to help without a latch can be used strain relief when fully prevent mismating to mate with the right-angle seated. Actual termination  Recognized under the headers (page 24). is accomplished with the TE Component Program of manual tooling shown on The cable connectors Underwriters page 28. feature reliable single- Laboratories Inc., R beam IDC (insulation The latching version of File No. E28476 displacement crimp) the cable connector is  Certified by Canadian contacts which are duplex equipped with a metal latch Standards plated with .000030 which provides positive R Association [0.00076] gold. These retention of the receptacle File No. LR7189 contacts can be mass cable connector when terminated to either solid or mated with a surface- 25 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Cable-to-Board Receptacle Connectors, Double Row, .050 x .050 [1.27 x 1.27] Centerline A Material and Finish Housing — Thermoplastic, black, 94V-0 rated Latch — Stainless steel Contacts — Phosphor bronze; duplex .280 [7.11] plated .000030 [0.00076] minimum gold in mating area, .000150 [0.00381] .627 minimum tin on solder tail, with entire [15.94] contact underplated .000050 [0.00127] .690 [17.56] minimum nickel Related Product Data Mating Headers — pages 21 and 24 (latching) D Terminating Covers (Must be .120 Purchased Separately, 2 Required [3.05] per Connector) — page 27 Termination Tooling — page 28 Performance Specifications — page 29 .050 B Spaces at [1.27] .050 [1.27] = C Typ Technical Documents — page 29 Product Specification 108-1443 .284 .327 [7.21] [8.31] Application Specification .050 408-9817, 408-9909 [1.27] Packaging — Tube Receptacle Dimensions No. of Part Numbers Pos. AB C D With Latch Without Latch 10 .578 [14.68] 4 .200 [5.08] .266 [6.76] 5-104892-1 5-104893-1 20 .828 [21.03] 9 .450 [11.43] .516 [13.11] 5-104892-2 5-104893-2 30 1.078 [27.38] 14 .700 [17.78] .766 [19.46] 5-104892-3 5-104893-3 40 1.328 [33.73] 19 .950 [24.13] 1.016 [25.81] 5-104892-4 5-104893-4 50 1.578 [40.08] 24 1.200 [30.48] 1.266 [32.16] 5-104892-5 5-104893-5 60 1.828 [46.43] 29 1.450 [36.83] 1.516 [38.51] 5-104892-6 5-104893-6 70 2.078 [52.78] 34 1.700 [43.18] 1.766 [44.86] 5-104892-7 5-104893-7 80 2.328 [59.13] 39 1.950 [49.53] 2.016 [51.21] 5-104892-8 5-104893-8 100 2.828 [71.83] 49 2.450 [62.23] 2.516 [63.91] 6-104892-0 6-104893-0 Note: All part numbers are RoHS compliant. 26 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Receptacle Connectors, Double Row, With and Without Latch Cable Conncetor Terminating Cover, Double Row Ribbon Cable Interconnect Solutions Terminating Covers for Cable Connectors Material Glass-filled thermoplastic, A black, 94V-0 rated .191 Related Product Data [4.85] Connectors used with Covers — page 26 Termination Tooling — page 28 Technical Documents — page 29 .277 Product Specification 108-1443 [7.04] Application Specification 408-9817, 408-9909 Packaging — Plastic bag No. of Dimension Terminator Cover Pos. A Part Numbers 10 .565 [14.35] 104891-1 20 .815 [20.70] 104891-2 30 1.065 [27.05] 104891-3 40 1.315 [33.82] 104891-4 50 1.565 [39.75] 104891-5 60 1.815 [46.10] 104891-6 70 2.065 [52.45] 104891-7 80 2.315 [58.80] 104891-8 100 2.815 [71.50] 1-104891-0 Note: Terminating covers must be purchased separately, two are required for each cable connector. Note: All part numbers are RoHS compliant. 27 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Application Tooling for Cable Connectors The Manual Miniature Application Frame Assembly 91295-1, equipped with a Cover Closing Kit 543518-1, is used for the IDC termina- tion of ribbon cable to the cable connectors shown on page 26. Prior to termination, the covers must be partially assembled onto a connec- tor housing, the cable inserted between the cov- ers and contacts and the covers preclosed by hand, clamping the cable in place. In the Manual Miniature Application Frame Assembly, the covers are fully seated to complete the mass termination and pro- Manual Miniature Application Frame Assembly 91295-1 with Cover Closing Kit 543518-1 vide strain relief for the completed connection. For tooling information, call Technical Support Center 1-800-522-6752. Note: Refer to TE Instruction Sheets 408-9817 (Frame Assembly 91295-1) and 408-9909 (Cover Closing Kit 543518-1) for complete termination/tooling information. Note: All part numbers are RoHS compliant. 28 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 IDC (Insulation Displacement Crimp) Tooling Performance Specifications/ Technical Documents Ribbon Cable Interconnect Solutions Performance Specifications Board-to-Board Connectors, Vertical and Right-Angle Mating Force — 6.4 oz (1.78 N] max. per contact Unmating Force — 1.0 oz [0.28 N] min. per contact Durability — Tested to 200 cycles min. Current Rating — (30°C T rise): .5 ampere per contact Operating Temperature Range — -65°C to +105°C Termination Resistance — 16 milliohms max. (initial) Insulation Resistance — 5000 megohms min. (initial) Dielectric Withstanding Voltage — 300 VAC Cable-to-Board Connectors Mating Force — 6.4 oz (1.78 N] max. per contact Unmating Force Without Latch — .5 oz [0.14 N] min. per contact Durability — Tested to 200 cycles min. Current Rating — (10°C T rise); .5 ampere per contact Operating Temperature Range — -65°C to +105°C Termination Resistance — 25 milliohms max. (initial and final) Insulation Resistance — 5000 megohms min. (initial) Dielectric Withstanding Voltage — 300 VAC Technical Documents Various technical documents are available for your use: Product Specifications describe technical performance characteristics and verification tests. They are intended for the Design, Component and Quality Engineer. 108-1332 AMPMODU 50/50 Grid Vertical Board-to-Board Connectors 108-1443 AMPMODU 50/50 Grid Right-Angle Board-to-Board and Cable Connectors Application Specifications describe requirements for using the product in its intended application and/or crimping information. They are intended for the Packaging and Design Engineer and the Machine Setup Person. 114-7010 AMPMODU 50/50 Grid Connector System Instruction Sheets provide instructions for assembling or applying the product. They are intended for the Manufacturing Assembler or Operator. 408-9817 Manual Miniature Application Frame Assembly 91295-1 408-9909 Cover Closing Kit 543518-1 Note: All part numbers are RoHS compliant. 29 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Features/ Benefits
Available in 2 to 20 positions
Applicable Wire: 20~28 AWG
Wire connectors supplied on-tape and suitable for mass termination of 2 28 AWG [0.08 mm to 2 0.09 mm ] ribbon cable
Tin plated contact design
Guaranteed minimum contact force of 2.0 N
Fretting corrosion proof thanks to additional positioning spring member
Full range of application tooling from hand tool to fully automated equipment Miniaturization and the relative movements caused optimization of both func- trend towards higher den- by vibrations/thermal tions and also leads to sity of electronic functions expansion between male relatively simple contact on a substrate led to the and female contacts are shapes. introduction of smaller absorbed. By preventing Because of their shapes interconnection systems. movements on the contact contacts can be post- The Micro-MaTch connector spot, a gas tight connection plated, leaving no bare family, with it’s contact can be guaranteed under edges in the contact and spacing of 1.27 mm, fully all circumstances. wire slot area. The contact complies with the electronic The contact spring is spring system features an packaging requirements of located in the board con- additional spring member — today and the future. The nector and not in the cable the positioning spring — system offers a range of connector, which is usually which compensates posi- board and wire connectors, the case. The counter part, tional tolerances. In this way enabling a variety of wire-to- incorporated in the cable the contact spring can be board and board-to-board connector, is a simple pin, fully optimized for its basic 1 interconnections. either with an insulation dis- function, so that the rela- The Micro-MaTch contact placement section, suitable tively high contact force, 2 concept shown on this page for the mass-termination of required for tin plated is essentially different from cable or with a kinked sol- contact systems, can be 3 other systems available. der leg to be soldered onto guaranteed under all By its design the traditional a PC Board. The separation circumstances. failure mode in tin plated of these two basic functions 1. Contact Pin The Micro-MaTch contact connections, fretting corro- of the contact system — spring system is absolutely 2. Contact Spring sion, is prevented. Due to contact force generation fretting corrosion proof by an additional positioning and wire termination — 3. Positioning its design. spring in the female part, enables the independent 30 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Micro-MaTch Miniature Connector System Micro-MaTch Miniature Connector System Overview Technical Data Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Overview Technical Data Technical Data Centerline: 1.27 mm (staggered) Number of Positions: 4, 6, 8, 10, 12, 14, 16, 18, 20, and some 24 positions Contact Material: Phosphor bronze Contact Finish: Tin over Nickel Housing Material: Thermoplastic polyester, red, glass-filled For surface mount versions polyamide 4.6 Flammability rating: per UL 94 V-0 UL-recognized: File E28476 Vol. 23 Section 4 Contact Resistance: 10 MΩ max. Insulation Resistance: 1.000 MΩ min. Nominal Voltage: 230 V Current Rating: 1.5 A max. Temperature Range: -40° C to +105° C (operating) Mating Force: 5N max. per contact Unmating Force: 1N min. per contact Minimum Contact Force: 2N min. Product Specification: 108-19052 Application Specification: 114-19016, 114-19051 RoHS Compliance Code: Always RoHS compliant (directive 2002/95/EC) for all types Lead-free Process Capable: Wave solder capable to 265° C for through hole versions reflow solder capable to 260° C for SMD versions PC Board Connectors PC Board Thickness: 1.6 mm nominal PC Board Hole Diameter: 0.8 mm for solder connectors Ribbon Connectors Cable Type: Ribbon cable, UL Style 2651 Conductor Spacing: 1.27 mm (.050") 2 Conductor Diameter: Solid 0.30 mm diameter Stranded 0.08 mm 7 x 0.12 - 0.13 mm (other diameters and/or configurations on request) Insulation Type: semi-rigid PVC Insulation Diameter: 0.9 ± 0.1 mm Discrete Wire (COSI) Connectors Cable Type : AWG 28-24 and 24-20 31 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Applications (3 Dimensions) Male Connectors COSI Part Number 338095 Male-on-Wire Male-on-Board Paddle Board Part Number 338096 Part Number 215083 Part Number 215464 Part Number 338097 Part Number 215570 Female Connectors 123 Female Top Entry Part Number 215079 4 5/6 7 Female Side Entry Part Number 215460 8910 SMD Top Entry Part Number 188275 Image Description (see also page 33) 1 Wire-to-Board through hole 2 Board-to-Board through hole 3 Wire-to-Board (discrete wire), through hole 4 Wire-to-Board right angle, through hole 5 Board-to-Board right angle, through hole 6 Board-to-Board right angle, through hole 7 Wire-to-Board right angle (discrete wire), through hole 8 Wire-to-Board surface mount 9 Board-to-Board surface mount, through hole 10 Wire-to-Board (discrete wire), surface mount 32 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Micro-MaTch Miniature Connector System Applications (3 Dimensions) Micro-MaTch Miniature Connector System Applications (2 Dimensions) Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Applications (2 Dimensions) Male Connectors COSI Part Number 338095 Male-on-Wire Male-on-Board Paddle Board Part Number 338096 Part Number 215083 Part Number 215464 Part Number 338097 Part Number 215570 Female Connectors 123 A A A C B B B C Female Top Entry C C Part Number 215079 4 6 7 A 5 AC B E C A B B G E A C B D D F C Female Side Entry C C Part Number 215460 D 8910 A A A C B B B SMD Top Entry D D D Part Number 188275 Dimensions (mm) Image A (max) B (max) C D (max) E (max) F(max) G (max) 1 5.2 7.5 2.54 — ——— 2 5.2 6.2 2.54 — ——— 3 5.2 9.7 2.54 — ——— 4 8.4 5.9 2.54 1.5 —— — 5 5.2 5.9 2.54 1.5 7.0 1.6 — 6 5.2 5.9 2.54 1.5 — — 2.8 7 5.2 5.9 2.54 1.5 10.6 —— 8 5.2 8.5 — 7.1 —— — 9 5.2 7.1 2.54 7.1 —— — 10 5.2 10.7 — 7.1 —— — 33 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Female-on-Board Connector, Top Entry 1.5 [.059] 5.1 Max. 4.0 [.200] [.157] This connector version incorporates the patented Micro-MaTch contact spring system and is designed to be soldered onto PC 1.9 Boards with a nominal thick- 3.1 [.074] [.122] ness of 1.6 mm. The solder legs are 1.27 indented, providing firm [.050] retention of the connector A before and during the B Max. soldering operations. As polarization is accom- 1.40 plished directly between the 1.80 2.54 [.055] [.100] [.071] Micro-MaTch male connec- tors and the PC Board, this top entry female connector does not have any polariz- ing features. Therefore, the orientation of the connector 1.27 on the PC Board is irrele- [.050] 1.50 Hole for 0.80 vant. [.059] Polarization Pin [.031] 2.54 [.100] Typical Hole Pattern Not Solder Side Shown Notes: 1. Connectors are always sideways mounted onto an adhesive tape. 2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm. 3. At additional charge a special packaging option is available: 250 connectors on a reel with a diameter of 250 mm, packed in a dedicated dispenser box. Mates with: Dimensions (mm) Part Numbers No. of Positions X-338095-X A B 2500 Connectors/Reel 250 Connectors/Box X-215083-X 4 3.81 7.1 215079-4 7-215079-4 X-215464-X 6 6.35 9.7 215079-6 7-215079-6 X-338728-X 8 8.89 12.2 215079-8 7-215079-8 10 11.43 14.7 1-215079-0 8-215079-0 12 13.97 17.3 1-215079-2 8-215079-2 14 16.51 19.8 1-215079-4 8-215079-4 16 19.05 22.4 1-215079-6 8-215079-6 18 21.59 24.9 1-215079-8 8-215079-8 20 24.13 27.4 2-215079-0 9-215079-0 34 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Micro-MaTch Miniature Connector System — Female-on-Board Connector, Top Entry Micro-MaTch Miniature Connector System — Female-on-Board Connector, Side Entry METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Female-on-Board Connector, Side Entry B 3.1 Max. [0.12] 5.8 This connector version is [0.23] identical to the top entry version with two exceptions: 3.85
The solder legs are 2.54 5.3 [0.15] Max. [0.09] [0.21] parallel to the mating face of the connector instead of perpendicular.
It's housing is polarized, so that polarization is accomplished directly 0.90 between the two mating [.039] 1.27 connectors. Proper [.050] orientation of the 2.54 connectors on the PC [.100] A Board is relevant here. 2.54 [0.09] 1.27 0.80 Nom. [0.05] [0.03] 2.54 (N-1)x1.27 [0.09] Recommended PCB Hole Layout Not Solder Side Shown Notes: 1. Connectors are always sideways mounted onto an adhesive tape. 2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm. 3. At additional charge a special packaging option is available: 250 connectors on a reel with a diameter of 250 mm, packed in a dedicated dispenser box. Mates with: Dimensions (mm) Part Numbers No. of Positions X-338095-X A B 2500 Connectors/Reel 250 Connectors/Box X-215083-X 4 3.81 7.1 (1500) 215460-4 (1500) 7-215460-4 X-215464-X 6 6.35 9.7 215460-6 7-215460-6 X-338728-X 8 8.89 12.2 215460-8 7-215460-8 10 11.43 14.7 1-215460-0 8-215460-0 12 13.97 17.3 1-215460-2 8-215460-2 14 16.51 19.8 1-215460-4 8-215460-4 16 19.05 22.4 1-215460-6 8-215460-6 18 21.59 24.9 1-215460-8 8-215460-8 20 24.13 27.4 2-215460-0 9-215460-0 35 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Female-on-Board Connector Surface Mount Device (SMD) Tape for Vacuum P&P 1.90 1.27 [.075] This SMD connector version [.050] is designed for standard A=(N-1)*1.27 reflow and infrared solder processes (“FULL SMD”). 0.5B-2.5 Polarization is accom- 5.0 5.0 plished by the housing, [.197] [.197] therefor no polarization holes in the PC Board are required. The contact is designed with an additional spring to com- pensate for differences in thermal expansion between 7.0 B [.276] housing and PCB. Due to this feature, tension on A solder joints is prevented. 2.54 5.0 [.100] 1.50 [.197] [.059] 3.00 Minimum 1.50 [.118] Solder Path Length [.059] Recommended PCB Layout Top View Notes: 1. To enable automatic Pick & Placement, connectors are always packed in embossed tape according EIA481 specification. 2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm. 3. Connectors are supplied with or without a feature for vacuum Pick & Placement. 4. For this connector no additional solder hold down is required. Mates with: Dimensions (mm) Part Numbers No. of Positions X-338095-X A B 2500 Connectors/Reel 250 Connectors/Box X-215083-X 4 3.81 7.1 188275-4 7-188275-4 X-215464-X 6 6.35 9.7 188275-6 7-188275-6 X-338728-X 8 8.89 12.2 188275-8 7-188275-8 10 11.43 14.7 1-188275-0 8-188275-0 12 13.97 17.3 1-188275-2 8-188275-2 14 16.51 19.8 1-188275-4 8-188275-4 16 19.05 22.4 1-188275-6 8-188275-6 18 21.59 24.9 1-188275-8 8-188275-8 20 24.13 27.4 2-188275-0 9-188275-0 36 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Micro-MaTch Miniature Connector System — Female-on-Board Connector Surface Mount Device (SMD) Micro-MaTch Miniature Connector System — Male-on-Board Connector METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions P Ma ic gr eo H -M eaa dT _ c1 h2M _H in eila vtC ud re Bd Co (Cn on nte inc uteo dr ) System — Male-on-Board Connector A 5.00 [.197] A A This male connector version is designed to be soldered onto PC Boards with a nom- B 2.54 inal thickness of 1.6 mm. [.100] 1.27 [.050] The solder legs are indented for firm retention of the connector in the PC Board. 6.75 [.266] The connector housing features a polarizing pin 7.10 [.280] on one end for proper orientation of this connector version. Section A-A 0.80 [.031] 2.54 1.27 [.100] [.050] 2.54 [.100] Typical Hole Pattern Not Solder Side Shown Notes: 1. To enable automatic Pick & Placement, connectors are always packed in embossed tape according EIA481 specification. 2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm. 3. Connectors are supplied with or without a feature for vacuum Pick & Placement. 4. For this connector no additional solder hold down is required. Dimensions (mm) Part Numbers No. of Positions Mates with: A B 2500 Connectors/Reel 250 Connectors/Box X-338095-X 4 3.81 8.2 215464-4 7-215464-4 X-215083-X 6 6.35 10.7 215464-6 7-215464-6 X-215464-X 8 8.89 13.3 215464-8 7-215464-8 X-338728-X 10 11.43 15.8 1-215464-0 8-215464-0 12 13.97 18.3 1-215464-2 8-215464-2 14 16.51 20.8 1-215464-4 8-215464-4 16 19.05 23.4 1-215464-6 8-215464-6 18 21.59 25.9 1-215464-8 8-215464-8 20 24.13 28.4 2-215464-0 9-215464-0 37 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Male-on-Wire Connector A A For the wire connection, a well-known type blade with a single slot is used. The A Max. insides of the slots are tin B Max. plated for stable and reliable connections. 5.10 C Max. [.201] The connector is supplied with a pre-assembled cover, providing excellent position- ing of the ribbon cable before and during the insulation displacement 10.20 [.402] process. After termination the cover is held in place by each individual contact in addi- Section A-A tion to two plastic latches at both ends of the connector. Remark: The Micro-MaTch Male-on-Wire connector is specifically designed to be disengaged from its counterpart by pulling the cable in the appropriate direction. Notes: 1. Connectors are always sideways mounted onto an adhesive tape. 2. Standard packaging quantity is 2500 connectors on a reel with a diameter of 600 mm. 3. At additional charge a special packaging option is available: 250 diameter of 250 mm, packed in a dedicated dispenser box. Mates with: Dimensions (mm) Part Numbers No. of Positions X-215079-X A B C 2500 Connectors/Reel 250 Connectors/Box X-215460-X 4 8.6 5.4 3.81 215083-4 7-215083-4 X-188275-X 6 11.1 8.0 6.35 215083-6 7-215083-6 X-215079-X 8 3.6 10.5 8.89 215083-8 7-215083-8 X-338068-X 10 16.2 13.0 11.43 1-215083-0 8-215083-0 X-338069-X 12 18.7 15.6 13.97 1-215083-2 8-215083-2 X-338070-X 14 21.3 18.1 16.51 1-215083-4 8-215083-4 X-100411-X 16 23.8 20.7 19.05 1-215083-6 8-215083-6 X-188431-X 18 26.3 23.2 21.59 1-215083-8 8-215083-8 20 28.9 25.7 24.13 2-215083-0 9-215083-0 24 34.0 30.8 29.21 2-215083-4 9-215083-4 38 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Micro-MaTch Miniature Connector System — Male-on-Wire Connector 6.8 Micro-MaTch Miniature Connector System — Paddle Board Connector METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Paddle Board Connector A 5.00 [.197] A A Direct soldering of a ribbon cable onto a PC Board is B a very difficult job with the 2.54 [.100] smaller sizes of ribbon 1.27 [.050] cable. If such a permanent cable connection is required, the application can be facilitated by using 6.75 this connector type. [.266] The Paddle Board connec- 7.10 [.280] tor is applied to the ribbon cable with the same appli- cation tooling, available Section A-A for the termination of the Male-on-Wire connector. The solder legs are 0.80 indented and provide [.031] mechanical retention of the connector/cable assembly in the PC Board before and during soldering. This Paddle Board connec- 2.54 1.27 tor version is designed to [.100] [.050] be soldered onto PC 2.54 [.100] Boards with a nominal thick- ness of 1.6 mm. Typical Hole Pattern Not Solder Side Shown Notes: 1. To enable automatic Pick & Placement, connectors are always packed in embossed tape according EIA481 specification. 2. Standard packaging quantity is 900 pcs on a reel with a diameter of 330 mm. 3. Connectors are supplied with or without a feature for vacuum Pick & Placement. 4. For this connector no additional solder hold down is required. No mate — direct soldering Dimensions (mm) Part Numbers No. of Positions of ribbon cable onto the A B C 2500 Connectors/Reel 250 Connectors/Box PC Board 4 8.6 5.4 3.81 215570-4 7-215570-4 6 11.1 8.0 6.35 215570-6 7-215570-6 8 3.6 10.5 8.89 215570-8 7-215570-8 10 16.2 13.0 11.43 1-215570-0 8-215570-0 12 18.7 15.6 13.97 1-215570-2 8-215570-2 14 21.3 18.1 16.51 1-215570-4 8-215570-4 16 23.8 20.7 19.05 1-215570-6 8-215570-6 18 26.3 23.2 21.59 1-215570-8 8-215570-8 20 28.9 25.7 24.13 2-215570-0 9-215570-0 24 34.0 30.8 29.21 2-215570-4 — 39 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Crimp On Snap In (COSI) Connector C 2.54 [.100] 1.27 [.050] 2.65 [.104] Basic Part Number 338095 B Max. and Contacts Part Numbers 5.10 338096 and 338097 Max. A Max. [.201] This crimp version for dis- crete Wire-to-Board applica- tions is fully compatible with 9.10 all female connectors of the 0.82 Max. [.358] [.032] Micro-MaTch family. 12.40 Max. [.488] Insulation and wire crimp barrel are copies of the well proven AMPLIMITE contacts. After mating with a Micro-MaTch female connector the contacts are 0.70 fully protected by isolating [.027] plastics. Contacts are made of a pre-tinned phosphor 6.00 Ref. [.236] bronze. Contacts are supplied in a range for 24-20 AWG and 28-24 AWG. For repair oper- 0.40 0.20 [.016] ations an extraction tool is [.008] available; Part Number 0.25 Cut Off [.010] Max. 734873-1. 8.65 Max. [.341] Notes: 1. Contacts can be crimped using a G-terminator or mini stripper crimper based applicator. 2. For the contacts on strip the standard packaging quantity is 15.000 pcs on a reel with a diameter of 600 mm. 3. For repair/service contacts are packaged 750 pcs. Per reel, to be used with handtools. 4. The housings are bulk packed in a box with a packaging quantity varying from 200 to 900 pcs per box. Mates with: Wire Size Range Part Number Insulation Diameter 2 X-338095-X (mm) (mm ) (AWG) Large reel, 15.000 Small reel, 750 0.08-0.20 28-24 0.76-1.00 338096-1 1-338096-1 0.20-0.50 24-20 1.27-1.52 338097-1 1-338097-1 Mates with: Dimensions (mm) Part Numbers No. of Positions X-215079-X A B C 2500 Connectors/Reel 250 Connectors/Box X-215460-X 4 7.2 8.4 3.81 338095-4 900 X-188275-X 6 9.8 10.9 6.35 338095-6 700 X-215079-X 8 12.3 13.5 8.89 338095-8 500 X-338068-X 10 14.9 16.0 11.43 1-338095-0 450 X-338069-X 12 17.4 18.5 13.97 1-338095-2 400 X-338670-X 14 19.9 21.1 16.51 1-338095-4 350 X-100411-X 16 22.5 23.6 19.05 1-338095-6 300 X-188431-X 18 25.0 26.2 21.59 1-338095-8 250 20 27.6 28.7 24.13 2-338095-0 200 40 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Micro-MaTch Miniature Connector System — Crimp On Snap In (COSI) Connector Micro-MaTch Miniature Connector System — Specials Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System — Specials SMC Connector Part Number 100411 This connector type enables a solderless application to the printed circuit board. Contact is made on the surface of the PCB, enabling the use of paperphenol and epoxy boards with both drilled and punched holes. This connector is suit- able for both Wire-to-Board as Board-to-Board connections. Because this connector is mounted on the solder side, the components of both PCB’s in a parallel Board-to-Board application, will be in the same direction. By this, the stack- ing of two or more PCB’s is possible. Application tooling available on request. Mates with: X-215464-X X-215083-X X-338095-X Locking Latch Part Numbers 338068/338069/338070 For Wire-to-Board applications this feature provides an audible click during mating. This feature is available for the standard Micro-MaTch female connectors. Cross reference is made by base part number x-338068-x instead of x-215079-x, x-338069-x instead of x-188275-x and x-338070-x instead of x-215460-x (standard large reel packaging only). Mates with: X-338095-X X-338728-X X-215464-X X-215083-X In-board SMD Part Number 188431 This connector is only tooled in 20 position (9-188431-0) and packaged in embossed tape according to EIA481 standards. The connectors are equipped with a feature for vacuum Pick & Placement. It enables the mounting of a PCB with the solder side direct behind e.g. a display. It is also possible to obtain a parallel BTB application with an extreme low PCB distance of 4.2 mm. Mates with: X-338095-X X-338728-X X-215464-X X-215083-X Male SMD Part Number 338728 This connector enables the possibility to have a full SMD to SMD Board-to-Board application. It mates with all Micro-MaTch female connectors, and will be packaged according EIA 481 standard. Consult TE for more information. Mates with: X-215079-X X-338070-X X-215460-X X-188431-X X-188275-X X-338068-X X-338069-X 41 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Application Tooling Pistol Handgrip Tooling. This is a Standard Pistol Handgrip Part Pistol Handgrip Adapter Set Part handtool for terminating Micro-MaTch Number 734155-1. This basic tool can Number 734024-1. This adapter can Male-on-Wire and Paddle Board con- be used for Micro-MaTch and other be used for Micro-MaTch terminations, nectors. Meant for small quantities or applications. together with the pistol handgrip. repair services. Pistol handgrip and adapter must be ordered separately. Bench Press Tooling Part Number Bench Press Part Number 91085-2. Bench Press Tool Set Part Number 733280-3. This complete tool includes This basic press is a hand operated 733278-2. This tool set is designed a Micro-MaTch dedicated tool set version. This press can also be especially for Micro-MaTch. It fits both mounted on the bench press 654173-2. obtained in a pneumatically operated pneumatically and hand operated press. version; Part Number 91112-3. COSI Hand Tooling Part Number G-terminator Part Number 677-499-1. Applicators for G-terminator. 734870-1 for 24-20 AWG, and Part Part Number 677894-1 for AWG 28- Number 734870-2 for 28-24 AWG. 24 (Part Number 338096-1) and These dedicated tools can be obtained Part Number 677895-1 for AWG 24- for services/repair applications. 20 (Part Number 338097-1). 42 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Micro-MaTch Miniature Connector System Application Tooling Micro-MaTch Miniature Connector System Application Tooling Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Application Tooling (Continued) Semiautomatic Tooling Part Number 677410-1. This tool can be used for Micro-MaTch lead end and for daisy chain assembly applications. Semiautomatic Tooling Part Number 677412-5 for Micro-MaTch only and Part Number 1-677412-0 for both Micro-MaTch and other ribbon cables. This machine can be used for lead end assemblies. Connector Dispenser Part Number 677463-1. The dispenser accepts the Micro-MaTch standard reels (2500 pcs/reel). It automatically removes the pre-set connector quantity from the reel and drops it in a separate box. Quantity can easily be programmed by the user. 43 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Micro-MaTch Miniature Connector System Lead Assembly It is possible to deliver custom made Micro-MaTch lead assemblies, both cable end assemblies and daisy- chain assemblies, in all positions between 4 and 20 in all required cable lengths. All leads are 100% electrically tested on shortcut and connection before shipment. A flexible 7 stranded cable is used for easy assembly. Special cable on request. For order information contact TE. Micro-MaTch Miniature Connector System Sample Box Sample Box Part Number 1377074-1 This box includes samples of all connector types within the Micro-MaTch family, examples of leads, printed circuit boards and a CD-ROM. The CD-ROM includes an electronic version of this catalogue, an animation of the contact principle and CAD files of all connector types. This sample box is an aid in visualizing the variety of applications where Micro-MaTch can be implemented. 44 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Micro-MaTch Miniature Connector System Lead Assembly and Sample Box .050 [1.27] Centerline Ribbon Cable Connectors Universal I/O Pin Connectors without Mounting Ears Ribbon Cable Interconnect Solutions P Ua ng iv ee H rs ea aldI_ /1 O2P _iH neC lv oC nd nB ed ct(o Cr os ntw inu it eh d)out Mounting Ears Material and Finish Housing and Cover — Flame retardant UL 94V-0 rated thermoplastic, black Contacts — Phosphor bronze, .000100 [0.00254] min. tin on termination end, .000030 [0.00762] min. gold on mating end, both over .000050 [0.00127] min. nickel Without Latches With Latches Technical Documents Product Specification 108-1336 Application Specification 114-7011 Instruction Sheets B 408-9720 408-6939
Recognized under the ±.015 0.754 ±0.36 [19.15 ] Component Program of the Underwriters R Laboratories, Inc. UL File No. E28476
Certified by the A Canadian Standards R Pin Length .240 Association, [6.10] File No. LR 7189 .330 [8.38] Accessories Strain Relief — page 67 Ejector Latch — page 63 Pins On Centerlines Position No.1 .100 Military Polarizer — page 63 Indicator [2.54] Terminates 26 and 28 AWG solid or stranded ribbon cable. See Application Dimensions Part Numbers of Connectors with: No. of Specification for cable requirements. Positions 1 2 AB No Latches Short Latches Long Latches .992 1.072 3,4 10 1-111446-4 1-111492-5 1-111504-4 25.20 27.23 Related Product Data 1.192 1.272 3,4 14 1-111446-5 1-111492-6 1-111504-5 30.28 32.31 Mateable Receptacles Novo — 1.292 1.372 pages 48-51 16 1-111446-6 1-111492-7 1-111504-6 32.82 34.85 Female Socket Connectors — 1.492 1.572 20 1-111446-8 — 1-111504-7 pages 52-55 37.90 39.93 1.692 1.772 24 1-111446-9 1-111492-9 1-111504-8 42.98 45.01 1.792 1.872 26 2-111446-0 2-111492-0 — 45.52 47.55 1.992 2.072 30 2-111446-1 2-111492-1 2-111504-0 50.60 52.63 2.192 2.272 34 2-111446-2 2-111492-2 — 55.68 57.71 2.492 2.572 40 2-111446-3 2-111492-3 — 63.30 65.33 2.692 2.772 44 2-111446-4 2-111492-4 2-111504-3 68.38 70.41 2.992 3.072 50 1-111446-7 2-111492-5 — 76.00 78.03 3.492 3.572 60 2-111446-5 2-111492-6 — 88.70 90.73 3.692 3.772 64 2-111446-6 — 2-111504-6 93.78 95.81 1 Use short latch versions when mating connectors without strain reliefs are used. 2 Use long latch versions when mating connectors with strain reliefs are used. Note: All part numbers are RoHS 3 No slot on end with position No. 1 indicator for 10 and 14-position connectors. compliant. 4 No slot for snap-in polarizer on end with position No. 1 indicator for 10 and 14-position connectors. 45 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Universal I/O Pin Connectors with Slotted Mounting Ears Material and Finish Housing and Cover — Flame retardant UL 94V-0 rated thermoplastic, black Contacts — Phosphor bronze, .000100 [0.00254] min. tin on termination end, .000030 [0.00762] min. gold on mating end, both over .000050 [0.00127] min. nickel Without Latches With Latches Technical Documents Product Specification 108-1336 Application Specification 114-7011 B Instruction Sheets 408-9720 408-6939 ± .015 .754
Recognized under the ± 0.36 [19.15 ] Component Program of the Underwriters R Laboratories, Inc. UL File No. E28476 A
Certified by the Pin Length Canadian Standards R .240 [6.10] Association, File No. LR 7189 .330 [8.38] Accessories Ejector Latch — page 63 Pins On Centerlines Military Polarizer — page 63 .100 [2.54] Position No.1 Indicator Terminates 26 and 28 AWG solid or stranded ribbon cable. See Application Specification for cable requirements. Dimensions Part Numbers of Connectors with: No. of Positions 1 2 AB No Latches Short Latches Long Latches .992 1.476 3,4 10 5111448-1 1-111494-5 1-111506-6 Related Product Data 25.20 37.49 Mateable Receptacles Novo — 1.192 1.676 3,4 14 —— — 30.28 42.57 pages 48-51 1.292 1.776 Female Socket Connectors — 16 5111448-3 — 1-111506-8 32.82 45.11 pages 52-55 1.492 1.976 20 5111448-4 1-111494-8 — 37.90 50.19 1.692 2.176 24 5111448-5 1-111494-9 2-111506-0 42.98 55.27 1.792 2.276 26 —— 2-111506-1 45.52 57.81 1.992 2.476 30 5111448-7 2-111494-0 — 50.60 62.89 2.192 2.676 34 5111448-8 2-111494-1 — 55.68 67.97 2.492 2.976 40 5111448-9 2-111494-2 2-111506-4 63.30 75.59 2.692 3.176 44 — 2-111494-3 2-111506-5 68.38 80.67 2.992 3.476 50 — 2-111494-4 1-111506-4 76.00 88.29 3.492 3.976 60 — 2-111494-5 — 88.70 100.99 3.692 4.176 64 1-5111448-3 2-111494-6 — 93.78 106.07 1 Use short latch versions when mating connectors without strain reliefs are used. 2 Use long latch versions when mating connectors with strain reliefs are used. Note: All part numbers are RoHS 3 No slot on end with position No. 1 indicator for 10 and 14-position connectors. compliant. 4 No slot for snap-in polarizer on end with position No. 1 indicator for 10 and 14-position connectors. 46 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .050 [1.27] Centerline Ribbon Cable Connectors Universal I/O Pin Connectors with Slotted Mounting Ears .050 [1.27] Centerline Ribbon Cable Connectors EUROLATCH Receptacles 64-Position METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions EUROLATCH Receptacles, 64-Position (Three-Row Housings, Two Rows Loaded) 78.74 3.48 Housing Assembly with Row A [3.100] [.137] Cover (Preassembled) 10.49 8.46 8.46 [.413] [.333] [.333] Row B 84.89 Row C [3.342] Housing Cover Assembly 89.92 [3.54] 94.74 [3.730] Material and Finish Housing and Cover — UL 94V-0 rated thermoplastic, black Contacts — Phosphor bronze, duplex plated 0.00076 [.000030] gold on post/pin mating end, 0.00254-0.00508 [.000100-.000200] tin on termination 6.35 end, with entire contact underplated [.250] 0.00127 [.000050] nickel. 10.95 14.43 [.431] [.568] Related Product Data 18.57 [.731] Mateable Pin Connectors — Eurocard Type C and Type R— Selection Guide 82650, See Catalog 82721 Terminated Ribbon Cable — 84.66 [3.333] Part Number 2-57040-2 or Part Number 2-57034-5 (64 conductor) Application Tooling — pages 70-74 Technical Documents Product Specifications 2.54 108-46003 EUROLATCH Receptacles [.100] DIN 41612 1.27 IEC 603-2 [.050] Instruction Sheet 2.79 Dia. Dia. 408-9156 [.110] (2 Holes)
Recognized under the Component Program of the Underwriters R Laboratories, Inc. UL File No. E28476
Certified by the Canadian Standards R Association, File No. LR 7189 Contact Receptacle Rows Kit No. Loaded (Preassembled) A and C 746603-4 Note: All part numbers are RoHS compliant. 47 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Novo Connectors Product Facts
.100 x .100 [2.54 x 2.54] mating grid for .050 [1.27] pitch ribbon cable
Tuning fork contact offers a military approved design, at an economical cost
Polarization options include military, center and military, and dual bar
Choice of duplex gold plating on contact mating area
Insulation displacement contacts for fast, economical mass terminations
Contact design provides uniform latching of contacts and housing with connector cover
Housing, cover and strain relief made of UL 94V-0 rated thermoplastic material Novo receptacles offer a Housings are made of
Selected 10 thru 64-position dual contact interface with UL 94V-0 thermoplastic configurations available all normal force created by material and feature military, metal-to-metal contact. This military and center, and
Accepts wire size range 2 provides a higher degree of dual bar polarization. 28-26 AWG [0.08-0.15 mm ], contact reliability. solid or stranded Optional accessories Novo receptacles feature include a snap-on strain
Snap-on strain relief and two rows of contacts on relief and pull loops. choice of pull loops .100 x .100 [2.54 x 2.54] available Novo receptacles can be centerlines in select sizes terminated to .050 [1.27]
One-step termination with from 10 to 64 positions. pitch ribbon cable by a Novo tooling 2 Contacts mate with .025 wide variety of one-step 2
Recognized under the [0.64 ] or round posts with application tooling. Component Program .245 [6.22] max. and .175 Assemblies are packaged of the Underwriters [4.45] min. lengths. The R in tubes for ease of handling, Laboratories, Inc. Novo tuning fork contact protection and termination. UL File No. E28476 offers a military-approved design, and at a lower cost.
Certified by the Canadian Standards R Contacts are made of Association, phosphor bronze and File No. LR 7189 are available in a choice of duplex .000015 [0.00038] or .000030 [0.00076] gold in the mating area, and .000100 [0.00254] tin in the termination area, with the entire contact underplated with .000050 [0.00127] nickel. 48 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .050 [1.27] Centerline Ribbon Cable Connectors Novo Connectors .050 [1.27] Centerline Ribbon Cable Connectors Novo Connectors Ribbon Cable Interconnect Solutions Novo Receptacles, Military Polarized* .100 x .100 [2.54 x 2.54] Centers .460 C Housing Assembly with [11.68] .135 .100 Cover (Preassembled) and [3.43] [2.54] Strain Relief (Optional) .240 [6.10] .100 [2.54] Housing Cover Assembly Position No. 1 • Index Slot .329 Contacts mate with .025 [0.64] sq. [8.36] .422 .464 or round pins with .245 [6.22] max. .570 [10.72] [11.79] and .175 [4.45] min. lengths. [14.48] .629 Ref. Ref. .650 Ref. [15.98] [16.51] Ref. .093 Ref. [2.36] Material and Finish Housing, Cover & Strain Relief — Terminated UL 94V-0 rated thermoplastic, black with Cover Contacts — Phosphor bronze, duplex B plated (See chart below) Terminated .106 with Cover A [2.69] and Strain Relief Related Product Data Mateable Pin Headers — Universal — pages 84-95 Low Profile — pages 76-83 .100 There is no polarization slot on • [2.54] this end of 10- and 14-position Mateable Universal I/O Pin receptacles. Connectors — pages 45 and 46 Housing Assembly and Cover Dimensions No. of Contact Strain Relief Receptacle Accessories Pos. Plating Part No. (Preassembled) AB C 1 Pull Tabs — page 63 Duplex 499252-5 1658620-1 .450 .680 .400 10 2 11.43 17.27 10.16 Keying Plug — page 64 Duplex 499252-5 1658623-1 1 Duplex 499252-9 1658620-2 Pull Loops — page 66 .650 .880 .600 14 2 16.51 22.35 15.24 Duplex 499252-9 1658623-2 Strain Relief Dimensional 1 Duplex 499252-8 1658620-3 Information — page 68 .750 .980 .700 16 2 19.05 24.89 17.78 Duplex 499252-8 1658623-3 Application Tooling — pages 70-74 1 Duplex 499252-2 1658620-4 .950 1.180 .900 20 2 24.13 29.97 22.86 Duplex 499252-2 1658623-4 1 Technical Documents Duplex 1-499252-0 1658620-5 1.150 1.380 1.100 24 2 29.21 35.05 27.94 Duplex 1-499252-0 1658623-5 Product Specifications 1 108-40000 Novo and Novo Stackable Duplex 499252-3 1658620-6 1.250 1.480 1.200 26 2 Receptacles; 108-40004 Ribbon Cable, 31.75 37.59 30.48 Duplex 499252-3 1658623-6 PVC Insulated 1 Duplex 1-499252-2 1658620-7 1.450 1.680 1.400 30 2 Application Specification 36.83 42.67 35.56 Duplex 1-499252-2 1658623-7 114-40005 Ribbon Cable Connectors 1 Duplex 499252-6 1658620-8 1.650 1.880 1.600 34 2 Instruction Sheets 41.91 47.75 40.64 Duplex 499252-6 1658623-8 Instructional material covering operation, 1 Duplex 499252-1 1658620-9 1.950 2.180 1.900 40 setup, maintenance, repair, etc. is included 2 49.53 55.37 48.26 Duplex 499252-1 1658623-9 with each machine, tool or die set. If this 1 Duplex 499252-4 1-1658620-0 2.450 2.680 2.400 material is required prior to receiving 50 2 62.23 68.07 60.96 Duplex 499252-4 1-1658623-0 your tooling, call TE at the numbers 1 Duplex 499252-7 — 2.950 3.180 2.900 listed below for the applicable docu- 60 2 74.93 80.77 73.66 Duplex 499252-7 — ments. 1 Duplex 1-499252-3 1-1658620-2 3.150 3.380 3.100 64 2 80.01 85.85 78.74 Duplex 1-499252-3 — 1 .000015 [0.00038] gold or gold flash over palladium-nickel .000015 [0.00038] min. total on post/pin mating end, .000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel. 2 .000030 [0.00076] gold or gold flash over palladium-nickel .000030 [0.00076] min. total on post/pin mating end, .000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel. Note: These receptacles include a housing assembly and cover (preassembled). Strain reliefs may be purchased sep- *These receptacles can be used in arately using the component part nos. listed above. applications requiring non-polariza- All part numbers are RoHS compliant. tion, as well as military polarization. 49 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Novo Receptacles, Center and Military Polarized* .100 x .100 [2.54 x 2.54] Centers .140 C .460 [3.56] .100 .135 [11.68] Housing Assembly with [2.54] [3.43] Cover (Preassembled) and Strain Relief (Optional) .240 [6.10] .100 Polarization [2.54] Bar .130 D D Housing Cover [3.30] Assembly Position No. 1 • Index Slot .329 .422 .464 Contacts mate with .025 [0.64] sq. [8.36] [10.72] [11.79] or round pins with .245 [6.22] max. .570 .650 Ref. Ref. .629 [14.48] and .175 [4.45] min. lengths. [16.51] [15.98] Ref. Ref. Ref. .093 [2.36] Material and Finish Housing, Cover & Strain Relief — Terminated with Cover UL 94V-0 rated thermoplastic, black Contacts — Phosphor bronze, duplex B Terminated plated (See chart below) with Cover A .106 and Strain Relief .100 [2.69] [2.54] Related Product Data Mateable Pin Headers — There is no polarization slot on Universal — pages 84-95 • this end of 10- and 14-position Low Profile — pages 76-83 receptacles. Mateable Universal I/O Pin Housing Assembly and Cover Connectors — pages 45 and 46 Dimensions No. of Contact Strain Relief Receptacle Pos. Plating Part No. (Preassembled) AB CD Accessories 1 Duplex 499252-5 1658621-1 .450 .680 .400 .275 10 Pull Tabs — page 63 11.43 17.27 10.16 6.99 2 Duplex 499252-5 1658622-1 Keying Plug — page 64 1 Duplex 499252-9 1658621-2 .650 .880 .600 .375 14 Pull Loops — page 66 16.51 22.35 15.24 9.53 2 Duplex 499252-9 1658622-2 1 Strain Relief — page 68 Duplex 499252-8 1658621-3 .750 .980 .700 .425 16 19.05 24.89 17.78 10.80 2 Application Tooling — pages 70-74 Duplex 499252-8 1658622-3 1 Duplex 499252-2 1658621-4 .950 1.180 .900 .525 20 24.13 29.97 22.86 13.34 2 Duplex 499252-2 1658622-4 Technical Documents 1 Duplex 1-499252-0 1658621-5 1.150 1.380 1.100 .625 24 29.21 35.05 27.94 15.88 2 Product Specifications Duplex 1-499252-0 1658622-5 108-40000 Novo and Novo Stackable 1 Duplex 499252-3 1658621-6 1.250 1.480 1.200 .675 26 Receptacles; 108-40004 Ribbon Cable, 31.75 37.59 30.48 17.15 2 Duplex 499252-3 1658622-6 PVC Insulated 1 Duplex 1-499252-2 1658621-7 1.450 1.680 1.400 .775 30 Application Specification 36.83 42.67 35.56 19.69 2 Duplex 1-499252-2 1658622-7 114-40005 Novo Receptacles 1 Duplex 499252-6 1658621-8 1.650 1.880 1.600 .875 34 Instruction Sheets 41.91 47.75 40.64 22.23 2 Duplex 499252-6 1658622-8 Instructional material covering operation, 1 Duplex 499252-1 1658621-9 1.950 2.180 1.900 1.025 setup, maintenance, repair, etc. is included 40 49.53 55.37 48.26 26.04 2 Duplex 499252-1 1658622-9 with each machine, tool or die set. If this 1 Duplex 499252-4 1-1658621-0 2.450 2.680 2.400 1.275 material is required prior to receiving 50 62.23 68.07 60.96 32.39 2 Duplex 499252-4 1-1658622-0 your tooling, call TE at the numbers 1 Duplex 499252-7 1-1658621-1 listed below for the applicable docu- 2.950 3.180 2.900 1.525 60 74.93 80.77 73.66 38.74 2 ments. Duplex 499252-7 1-1658622-1 1 Duplex 1-499252-3 1-1658621-2 3.150 3.380 3.100 1.625 64 80.01 85.85 78.74 41.28 2 Duplex 1-499252-3 1-1658622-2 1 .000015 [0.00038] gold or gold flash over palladium-nickel .000015 [0.00038] min. total on post/pin mating end, .000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel. 2 .000030 [0.00076] gold or gold flash over palladium-nickel .000030 [0.00076] min. total on post/pin mating end, .000100-.000200 [0.00254-0.00508] tin on termination end, with entire contact underplated .000050 [0.00127] nickel. *These receptacles can be used Note: These receptacles include a housing assembly and cover (preassembled). Strain reliefs may be purchased sep- in applications requiring center arately using the component part nos. listed above. polarization. All part numbers are RoHS compliant. 50 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .050 [1.27] Centerline Ribbon Cable Connectors Novo Connectors .050 [1.27] Centerline Ribbon Cable Connectors Novo Connectors Ribbon Cable Interconnect Solutions Novo Receptacles, Dual Polarized, .100 x .100 [2.54 x 2.54] Centers .140 Housing Assembly with .460 C .100 [3.56] .135 [11.68] Recessed Cover [2.54] [3.43] (Preassembled) and Strain Relief (Optional) .240 [6.10] .100 [2.54] .140 .190 Housing Cover [3.56] [4.83] Assembly Material and Finish Position No. 1 Index Slot Housing, Cover & Strain Relief — UL 94V-0 rated thermoplastic, black Contacts — Phosphor bronze, duplex plated .000030 [0.00076] gold or gold .329 .422 .464 flash over palladium-nickel .000030 [8.36] [10.72] [11.79] .570 .650 [0.00076] min. total on post/pin mating Ref. Ref. .629 [14.48] [16.51] end, .000100-.000200 [0.00254- [15.98] Ref. Ref. Ref. 0.00508] tin on termination end, with .093 entire contact underplated .000050 [2.36] [0.00127] nickel. Terminated with Cover Related Product Data B Terminated Mateable Pin Headers — with Cover A Universal — pages 84-95 .106 and Strain Relief .100 Low Profile — pages 76-83 [2.69] [2.54] Mateable Universal I/O Pin Connectors — pages 45 and 46 Accessories Housing Assembly and Cover Pull Tabs — page 63 Keying Plug — page 64 Pull Loops — page 66 Strain Relief — page 68 Application Tooling — pages 70-74 Dimensions No. of Strain Relief Receptacle Pos. Part No. (Preassembled) ABC Technical Documents .450 .680 .400 10 499252-5 1658624-1 Product Specifications 11.43 17.27 10.16 108-40000 Novo and Novo Stackable .650 .880 .600 14 499252-9 1658624-2 Receptacles; 108-40004 Ribbon Cable, 16.51 22.35 15.24 PVC Insulated .750 .980 .700 16 499252-8 1658624-3 19.05 24.89 17.78 Application Specification 114-40005 Novo Receptacles .950 1.180 .900 20 499252-2 1658624-4 24.13 29.97 22.86 Instruction Sheets 1.150 1.380 1.100 Instructional material covering operation, 24 1-499252-0 1658624-5 29.21 35.05 27.94 setup, maintenance, repair, etc. is included 1.250 1.480 1.200 26 499252-3 1658624-6 with each machine, tool or die set. If this 31.75 37.59 30.48 material is required prior to receiving 1.450 1.680 1.400 30 1-499252-2 1658624-7 your tooling, call TE at the numbers listed 36.83 42.67 35.56 below for the applicable documents. 1.650 1.880 1.600 34 499252-6 1658624-8 41.91 47.75 40.64 1.950 2.180 1.900 40 499252-1 1658624-9 49.53 55.37 48.26 2.450 2.680 2.400 50 499252-4 1-1658624-0 62.23 68.07 60.96 3.150 3.380 3.100 64 1-499252-3 1-1658624-2 80.01 85.85 78.74 Note: All part numbers are RoHS compliant. 51 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 METRIC Dimensions are millimeters over inches Ribbon Cable Interconnect Solutions Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series Technical Data Color — 622 Series, Blue; 636 Series, Black Contact Material — 622 Series, Beryllium copper; 636 Series, Phosphor bronze Contact Plating — 622 Series, .000030 [0.00076] min. gold on mating end, .000100-.000200 [0.00254- 0.00508] tin on termination end, both over .000050 [0.00127] nickel under- plate; 636 Series, .000015 [0.00038] min. gold on mating end, .000100- .000200 [0.00254-0.00508] tin on termination end, both over .000050 [0.00127] nickel underplate. Housing Material — Glass-filled thermoplastic, UL 94V-0 rated Cable — 26-28 AWG solid or stranded, PVC insulated ribbon cable Mateable Connectors — Universal and Low Profile Pin Headers — pages 76-95 Universal I/O Ribbon Cable Connectors — pages 45 and 46 Polarization — Military and center polarized only
Recognized under the Component Program of the Underwriters R Laboratories, Inc. UL File No. E60980
Certified by the Canadian Standards R Association, File No. LR 92984 Application Tooling Die — 1437000-9 [T&B# 779-2151 ref.] Handtool — 1437000-6 [T&B# 779-2100 ref.] Bench Press (Manual) — 1437001-4 [T&B# 779-3200 ref.] Bench Press Platen — 5-1437000-6 [T&B# 779-3130 ref.] Bench Press Base Plate — 6-1437000-4 [T&B# 779-3151 ref.] Accessories Strain Relief — page 69 Pull Loops — page 66 Keying Plug — page 64 52 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .050 [1.27] Centerline Ribbon Cable Connectors Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series .050 [1.27] Centerline Ribbon Cable Connectors Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series Ribbon Cable Interconnect Solutions Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 622 and 636 Series (Continued) 622 Series Part Numbers Connector Connector No.of Dimensions Only w/ Strain Relief Pos. A BC T&B T&B TE Connectivity TE Connectivity (Reference Only) (Reference Only) .477 .200 .075 6 1658527-2 622-0630LF 1-1658527-9 622-0641LF 12.12 5.08 1.91 .677 .400 .126 10 1658527-3 622-1030LF 1658527-4 622-1041LF 17.20 10.16 3.20 .777 .500 .150 12 2-1658527-0 622-1230LF —— 19.74 12.70 3.81 .877 .600 .150 14 1658527-5 622-1430LF 2-1658527-2 622-1441LF 22.28 15.24 3.81 .977 .700 .150 16 1658527-6 622-1630LF 1658527-7 622-1641LF 24.82 17.78 3.81 1.177 .900 .150 20 2-1658527-3 622-2030LF 1658527-8 622-2041LF 29.90 22.86 3.81 1.377 1.100 .150 24 — — 2-1658527-5 622-2441LF 34.98 27.94 3.81 1.477 1.200 .150 26 1658527-9 622-2630LF 1-1658527-0 622-2641LF 37.52 30.48 3.81 1.677 1.400 .150 30 —— 2-1658527-7 622-3041LF 42.60 35.56 3.81 1.877 1.600 .150 34 —— 2-1658527-8 622-3441LF 47.68 40.64 3.81 2.177 1.900 .150 40 1-1658527-2 622-4030LF 1-1658527-3 622-4041LF 55.30 48.26 3.81 2.677 2.400 .150 50 1-1658527-4 622-5030LF 1-1658527-5 622-5041LF 68.00 60.96 3.81 3.377 3.100 .150 64 —— 3-1658527-2 622-6441LF 85.78 78.74 3.81 Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the “LF” suffix. 636 Series Part Numbers Connector Connector No.of Dimensions Only w/ Strain Relief Pos. AB C T&B T&B TE Connectivity TE Connectivity (Reference Only) (Reference Only) .477 .200 .075 6 1-1658528-0 636-0630LF —— 12.12 5.08 1.91 .677 .400 .126 10 1-1658528-1 636-1030LF 1658528-2 636-1041LF 17.20 10.16 3.20 .877 .600 .150 14 1-1658528-2 636-1430LF —— 22.28 15.24 3.81 .977 .700 .150 16 1-1658528-4 636-1630LF 1658528-5 636-1641LF 24.82 17.78 3.81 1.177 .900 .150 20 1-1658528-5 636-2030LF 1658528-4 636-2041LF 29.90 22.86 3.81 1.377 1.100 .150 24 1-1658528-6 636-2430LF —— 34.98 27.94 3.81 1.477 1.200 .150 26 1-1658528-7 636-2630LF —— 37.52 30.48 3.81 1.877 1.600 .150 34 —— 1658528-6 636-3441LF 47.68 40.64 3.81 2.177 1.900 .150 40 —— 1-1658528-9 636-4041LF 55.30 48.26 3.81 2.677 2.400 .150 50 2-1658528-0 636-5030LF 1658528-8 636-5041LF 68.00 60.96 3.81 3.377 3.100 .150 64 —— 2-1658528-3 636-6441LF 85.78 78.74 3.81 Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the Note: All part numbers are RoHS “LF” suffix. compliant. 53 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 METRIC Dimensions are millime- ters over inches Ribbon Cable Interconnect Solutions Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series Technical Data Color — Blue Contact Material — Beryllium copper Dual Slot IDC Design Contact Plating — .000030 [0.00076] min. gold on mating end, .000100- .000200 [0.00254-0.00508] tin on termination end, both over .000050 [0.00127] nickel underplate. Housing Material — Glass-filled thermoplastic, UL 94V-0 rated Cable — 28-30 AWG solid or stranded, PVC insulated ribbon cable Mateable Connectors — Universal and Low Profile Pin Optional Center Headers — pages 76-95 Polarization Universal I/O Ribbon Cable Connectors — pages 45 and 46 Polarization — Military only or military and center polarized
Recognized under the Component Program of the Underwriters 3.30 R Laboratories, Inc. [.130] UL File No. E60980
Certified by the Canadian Standards R Association, File No. LR 92984 Application Tooling Die — 1437000-9 [T&B# 779-2151 ref.] Standard Socket Connector Handtool — Without Strain Relief 1437000-6 [T&B# 779-2100 ref.] Bench Press (Manual) — 1437001-4 [T&B# 779-3200 ref.] Bench Press Platen — 5-1437000-6 [T&B# 779-3130 ref.] Bench Press Base Plate — 6-1437000-4 [T&B# 779-3151 ref.] Accessories Strain Relief — page 67 Pull Loops — page 66 Keying Plug — page 64 Note: All part numbers are RoHS compliant. 54 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .050 [1.27] Centerline Ribbon Cable Connectors Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series .050 [1.27] Centerline Ribbon Cable Connectors Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series Ribbon Cable Interconnect Solutions Female Socket Connectors, .100 x .100 [2.54 x 2.54] Centers, 609 Series (Continued) 609 Series, Military Polarized Part Numbers Connector Connector No.of Dimensions Only w/ Strain Relief Pos. A BC T&B T&B TE Connectivity TE Connectivity (Reference Only) (Reference Only) .476 .200 .392 6 2-1658526-5 609-0600MLF —— 12.09 5.08 9.96 .676 .400 .592 10 1658526-3 609-1000MLF —— 17.17 10.16 15.04 .976 .700 .892 16 —— 1-1658526-0 609-1601MLF 24.79 17.78 22.66 1.176 .900 1.092 20 3-1658526-0 609-2000MLF —— 29.87 22.86 27.74 1.476 1.200 1.392 26 3-1658526-5 609-2600MLF —— 37.49 30.48 35.36 2.176 1.900 2.092 40 4-1658526-1 609-4000MLF —— 55.27 48.26 53.14 2.676 2.400 2.592 50 4-1658526-3 609-5000MLF 2-1658526-2 609-5001MLF 67.97 60.96 65.84 Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the “LF” suffix. 609 Series, Military and Center Polarized Part Numbers Connector Connector No.of Dimensions Only w/ Strain Relief Pos. AB C T&B T&B TE Connectivity TE Connectivity (Reference Only) (Reference Only) .476 .200 .392 6 1658526-1 609-0630LF 1658526-2 609-0641LF 12.09 5.08 9.96 .676 .400 .592 10 1658526-4 609-1030LF 1658526-5 609-1041LF 17.17 10.16 15.04 .876 .600 .792 14 1658526-8 609-1430LF 1658526-9 609-1441LF 22.25 15.24 20.12 .976 .700 .892 16 2-1658526-9 609-1630LF 1-1658526-1 609-1641LF 24.79 17.78 22.66 1.176 .900 1.092 20 1-1658526-2 609-2030LF 1-1658526-3 609-2041LF 29.87 22.86 27.74 1.376 1.100 1.292 24 1-1658526-4 609-2430LF —— 34.95 27.94 32.82 1.476 1.200 1.392 26 1-1658526-5 609-2630LF 1-1658526-6 609-2641LF 37.49 30.48 35.36 1.876 1.600 1.792 34 1-1658526-8 609-3430LF 1-1658526-9 609-3441LF 47.65 40.64 45.52 1.976 1.700 1.892 36 3-1658526-8 609-3630LF 4-1658526-0 609-3641LF 50.19 43.18 48.06 2.176 1.900 2.092 40 2-1658526-0 609-4030LF 2-1658526-1 609-4041LF 55.27 48.26 53.14 2.676 2.400 2.592 50 2-1658526-3 609-5030LF 2-1658526-4 609-5041LF 67.97 60.96 65.84 3.376 3.100 3.292 64 4-1658526-4 609-6430LF 4-1658526-5 609-6441LF 85.75 78.74 83.62 Note: Order by TE Part Number only. Original non-RoHS compliant T&B number may be determined by dropping the “LF” suffix. Note: All part numbers are RoHS compliant. 55 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series Technical Data Color — Blue Contact Material — Beryllium copper Contact Plating — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel underplate. .280 [7.1] Contact Design — Dual slot, barrel shaped (“tulip”) IDC with solder tail A Housing Material — Glass-filled .100 thermoplastic, UL 94V-0 rated [2.54] Cable — 28-30 AWG solid or stranded, PVC insulated ribbon cable .319 Before Mateable Connectors — [8.1] Crimping .100 x .100 DIP sockets .008 x .024 [0.2 x 0.6] Application Tooling Die — .100 .100 [2.54] B 1-1437000-3 [T&B# 779-2153 ref.] [2.54] Handtool — 1437000-6 [T&B# 779-2100 ref.] Bench Press (Manual) — 1437001-4 [T&B# 779-3200 ref.] Bench Press Platen — 5-1437000-6 [T&B# 779-3130 ref.] Bench Press Base Plate — 6-1437000-7 [T&B# 779-3153 ref.] Part Numbers Dimensions No.of T&B Pos. AB TE Connectivity (Reference Only) .512 .200 6 1437006-4 609-0653 13.00 5.08 .713 .400 10 1437006-7 609-1053 18.11 10.16 .913 .600 14 1-1437006-0 609-1453 23.19 15.24 1.010 .700 16 1-1437006-3 609-1653 25.65 17.78 1.213 .900 20 1-1437006-6 609-2053 30.81 22.86 1.512 1.200 26 2-1437006-1 609-2653 38.40 30.48 1.913 1.600 34 2-1437006-4 609-3453 48.59 40.64 Note: Order by TE Part Number only. All part numbers listed above are found on TE customer drawing 1437006-4. Note: All part numbers are RoHS compliant. 56 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .050 [1.27] Centerline Ribbon Cable Connectors DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 609 Series .050 [1.27] Centerline Ribbon Cable Connectors DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series Ribbon Cable Interconnect Solutions DIP Plugs, .100 x .100 [2.54 x 2.54] Centers, 622 Series 7.57 Technical Data (.298) Color — Blue Contact Material — Beryllium copper Contact Plating — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel underplate. Contact Design — Single slot, flat, tuning fork style IDC with solder tail Housing Material — Glass-filled thermoplastic, UL 94V-0 rated Cable — 26-28 AWG solid or stranded, PVC insulated ribbon cable Mateable Connectors — .100 x .100 DIP sockets Application Tooling Die — 1-1437000-3 [T&B# 779-2153 ref.] Handtool — 1437000-6 [T&B# 779-2100 ref.] Bench Press (Manual) — 1437001-4 [T&B# 779-3200 ref.] Bench Press Platen — Part Numbers 6-1437000-1 [T&B# 779-3133 ref.] Dimensions No.of T&B Pos. Bench Press Base Plate — AB TE Connectivity (Reference Only) 6-1437000-7 [T&B# 779-3153 ref.] .506 .200 6 1658525-4 622-0653LF 12.85 5.08 .606 .300 8 1658525-5 622-0853LF Accessories 15.39 7.62 Strain Relief — page 65 .706 .400 10 1658525-6 622-1053LF 17.93 10.16 .906 .600 14 1658525-7 622-1453LF 23.01 15.24 1.006 .700 16 1658525-8 622-1653LF 25.55 17.78 1.206 .900 20 1658525-9 622-2053LF 30.63 22.86 1.406 1.100 24 1-1658525-0 622-2453LF 35.71 27.94 1.506 1.200 26 1658525-1 622-2653LF 38.25 30.48 1.906 1.600 34 1658525-2 622-3453LF 48.41 40.64 2.006 1.700 36 1-1658525-2 622-3653LF 50.95 43.18 2.206 1.900 40 1-1658525-3 622-4053LF 56.03 48.26 2.706 2.400 50 1658525-3 622-5053LF 68.73 60.96 3.206 2.900 60 1-1658525-5 622-6053LF 81.43 73.66 3.406 3.100 64 1-1658525-6 622-6453LF 86.51 78.74 Notes: Order by TE Part Number only. All part numbers are RoHS compliant. 57 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions DIP Plugs, .100 x .100 [2.54 x 2.54] Centers B Housing Assembly with Cover (Preassembled) C .050 [1.27] .278 [7.06] .100 [2.54] A .050 [1.27] A .050 Material and Finish [1.27] Housing and Cover — Black thermoplastic, UL 94V-0 rated Contacts — Phosphor bronze, plated .000005 [0.000127] min. gold in termi- .396* [10.06] nation area, .000100 [0.00254] min. tin on solder tails, both over .000050 [0.00127] nickel on entire contact Contact Design — Flat, tuning fork style IDC .113 .156 [2.87] [3.96] .100 .019 Related Product Data [2.54] .013 [0.48] C Application Tooling — pages 70-74 [0.33] *Height of connector after .100 termination is .253 [6.43] ref. [2.54] Technical Documents Product Specification 108-1538 DIP Plug Instruction Sheets Instructional material covering operation, setup, maintenance, repair, etc. is included with each machine, tool or die set. If this material is required prior to receiving your tooling, call TE at the numbers listed below for the applicable documents. Dimensions No. of DIP Plugs With Retention Pos. (Preassembled) Legs Mateable Connectors — ABC For Connectors without Retention .450 .680 .400 10 2-746610-1 1-111382-4 11.43 17.27 10.16 Legs — .100 x .100 DIP Sockets .650 .880 .600 14 2-746610-2 — 16.51 22.35 15.24 .750 .980 .700 16 1-746610-4 1-111382-6 19.05 24.89 17.78 .950 1.180 .900 20 1-746610-5 1-111382-7 24.13 29.97 22.86 1.150 1.380 1.100 24 2-746610-3 — 29.21 35.05 27.94 1.250 1.480 1.200 26 1-746610-6 1-111382-8 31.75 37.59 30.48 1.450 1.680 1.400 30 1-746610-7 — 36.83 42.67 35.56 C 1.650 1.880 1.600 .100 34 1-746610-8 1-111382-9 41.91 47.75 40.64 [2.54] 1.950 2.180 1.900 40 1-746610-9 — 49.53 55.37 48.26 2.150 2.380 2.100 44 2-746610-6 — 54.61 60.45 53.34 .035 .100 Dia. 2.450 2.680 2.400 [0.89] [2.54] 50 2-746610-0 2-111382-0 62.23 68.07 60.96 (After Plating) 2.950 3.180 2.900 60 2-746610-4 — 74.93 80.77 73.66 3.150 3.380 3.100 PCB Layout 64 2-746610-5 — 80.01 85.85 78.74 Notes: All plug kits include a housing assembly and cover (preassembled). All part numbers are RoHS compliant. 58 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .050 [1.27] Centerline Ribbon Cable Connectors DIP Plugs, .100 x .100 [2.54 x 2.54] Centers .050 [1.27] Centerline Ribbon Cable Connectors DIP Plugs, .100 x .300 [2.54 x 7.62] Centers Ribbon Cable Interconnect Solutions DIP Plugs, .100 x .300 [2.54 x 7.62] Centers Housing Assembly with Cover (Preassembled) Material and Finish Housing and Cover — Black thermo- plastic, UL 94V-0 rated Contacts — Phosphor bronze, plated .000050 [0.00127] nickel underplate on entire contact, .000005 [0.000127] min. gold on termination (IDC) end. See table for leg finish. Contact Design — Flat, tuning fork style IDC Related Product Data Application Tooling — pages 70-74 Technical Documents Product Specification 108-1538 DIP Plug Ribbon Cable Requirements — 28 AWG stranded or 26, 28 and 30 AWG solid wire Dimensions No. of Contact DIP Plugs Pos. Plating (Preassembled) ABC 1 Duplex 746611-7 .350 .488 .300 2 8 Duplex — 8.89 12.40 7.62 3 Duplex 5746613-1 1 Duplex 746611-8 .650 .788 .600 2 14 Duplex 5746612-2 16.51 20.02 15.24 3 Duplex 5746613-2 .300 1 Duplex 746611-6 [7.62] .750 .888 .700 2 16 Duplex 5746612-3 19.05 22.56 17.78 3 Duplex 5746613-3 1 Duplex 746611-9 .850 .988 .800 2 18 Duplex — 21.59 25.10 20.32 3 Duplex — 1 Recommended Mounting Duplex 1-746611-0 Hole Pattern .950 1.088 .900 2 20 Duplex — 24.13 27.64 22.86 (for .094-.125 [2.39-3.18] 3 Duplex — thick pc boards) 1 .000030 [0.00076] gold on leg 2 .000015 [0.00038] gold on leg 3 .000100 [0.00254] tin on leg Note: All part numbers are RoHS compliant. 59 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions DIP Plugs, .100 x .600 [2.54 x 15.24] Centers Housing Assembly with Cover (Preassembled) Material and Finish Housing and Cover — Black thermo- plastic, UL 94V-0 rated Contacts — Phosphor bronze, plated .000050 [0.00127] nickel underplate on entire contact, .000005 [0.000127] min. gold on termination (IDC) end. See table for leg finish. Contact Design — Flat, tuning fork style IDC Related Product Data Application Tooling — pages 70-74 Technical Documents Product Specification 108-1538 DIP Plug Ribbon Cable Requirements — 28 AWG stranded or 26, 28 and 30 AWG solid wire Dimensions No. of Contact DIP Plugs Pos. Plating (Preassembled) ABC 1.150 1.288 1.100 1 24 Duplex 5746615-1 29.21 32.72 27.94 1.350 1.488 1.300 1 28 Duplex 5746615-2 34.29 37.80 33.02 1.950 2.088 1.900 1 40 Duplex 5746615-3 49.53 53.04 48.26 1 .000015 [0.00038] gold on leg Recommended Mounting Hole Pattern (for .094-.125 [2.39-3.18] thick pc boards) Note: All part numbers are RoHS compliant. 60 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .050 [1.27] Centerline Ribbon Cable Connectors DIP Plugs, .100 x .600 [2.54 x 15.24] Centers .050 [1.27] Centerline Ribbon Cable Connectors 4-Row PCB Solder Transition Connectors Ribbon Cable Interconnect Solutions 4-Row PCB Solder Transition Connectors Technical Data Color — Blue Contact Material — Beryllium copper Contact Plating — .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel underplate. Contact Design — Dual slot, barrel shaped (“tulip”) IDC with solder tail Housing Material — Glass-filled thermoplastic, UL 94V-0 rated Cable — 28-30 AWG solid or stranded, PVC insulated ribbon cable Application Tooling Die — 1-1437000-3 [T&B# 779-2153 ref] Handtool — 1437000-6 [T&B# 779-2100 ref] Bench Press (Manual) — 1437001-4 [T&B# 779-3200 ref] Bench Press Platen — 609 Series, Military Polarized 5-1437000-6 [T&B# 779-3130 ref] Bench Press Base Plate — Part Numbers No.of Dimensions 6-1437000-7 [T&B# 779-3153 ref] .100 Tail Length .156 Tail Length Pos. AB TE Connectivity T&B TE Connectivity T&B (Reference Only) (Reference Only) .710 .450 10 6437006-5 609-1003LF —— 18.03 11.43 .910 .650 14 6437006-8 609-1403LF 6437006-9 609-1443LF 23.11 16.51 1.010 .750 16 1-6437006-1 609-1603LF —— 25.65 19.05 1.210 .950 20 —— 1-6437006-5 609-2043LF 30.73 24.13 1.510 1.250 26 1-6437006-8 609-2603LF 2-6437006-0 609-2643LF 38.35 31.75 1.910 1.650 34 2-6437006-2 609-3403LF 2-6437006-3 609-3443LF 48.51 41.91 2.410 2.150 44 2-6437006-9 609-4403LF —— 61.21 54.61 2.710 2.450 50 —— 3-6437006-2 609-5043LF 68.83 62.23 Notes: Order by TE Part Number only. All part numbers listed above are found on TE Customer Drawing 6437006-5. Note: All part numbers are RoHS compliant. 61 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions 1-Row Horizontal Receptacles A B 1.35 1.25 Pitch [.053] 1.40 [.049] [.055] 2.80 3.00 [.110] [.118] Optional Mounting Boss 3.40 4.20 [.134] [.165] Material and Finish Housing — Black PPS, UL 94V-0 rated Contacts — Phosphor bronze, 0.05 post tin plated over nickel underplate 0.50 0.80 C [.002] [.020] [.031] 0.70 1.30 Min. [.028] [.051] 3.40 [.134] 0.70 Min. [.028] Ø 0.80 [.031] 1.35 0.50 [.053] [.020] A PCB Mounting Layout 1.25 Fine Pitch (FP) - 1-Row Horizontal Receptacles Part Numbers Dimensions No. of With Mounting Bosses Without Mounting Bosses Pos. ABC Tape Bag Tape Bag 6.45 3.75 5.45 4 3-175637-4 3-174638-4 3-175629-4 3-174903-4 .254 .148 .215 7.70 5.00 6.70 5 3-175637-5 3-174638-5 3-175629-5 3-174903-5 .303 .197 .264 8.95 6.25 7.95 6 3-175637-6 3-174638-6 3-175629-6 3-174903-6 .352 .246 .313 10.20 7.50 9.20 7 3-175637-7 3-174638-7 3-175629-7 3-174903-7 .402 .295 .362 2.35 Slot Key 11.45 8.75 10.45 8 3-175637-8 3-174638-8 3-175629-8 3-174903-8 .451 .345 .411 13.95 11.25 12.95 10 4-175637-0 4-174638-0 4-175629-0 4-174903-0 .549 .443 .510 22.70 20.00 21.70 17 — 4-174638-7 4-175629-7 4-174903-7 .894 .787 .854 26.45 23.75 25.45 20 — 5-174638-0 — 5-174903-0 1.041 .935 1.002 Note: All part numbers are RoHS compliant. 62 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .050 [1.27] Centerline Ribbon Cable Connectors 1-Row Horizontal Receptacles Accessories Ribbon Cable Interconnect Solutions A A Ac c cc c ce e es s ss s so o or r ri i ie e es s s ( (C Co on nt tiin nu ue ed d) ) Approximate Installed Height of Flexible Pull Tabs Part Number 120623-1 Above Connector Dimensions No. of Material and Finish Positions CH Nylon, black .680 1.806 10 17.27 45.87 .880 1.749 Part Number 120623-1 14 22.35 44.42 .980 1.721 16 24.89 43.71 Related Product Data 1.180 1.664 Novo Connectors — pages 48-51 20 29.97 42.27 Ultra ATA Bus Connectors — 1.380 1.607 24 pages 13-15 35.05 40.82 1.480 1.578 26 37.59 40.08 1.680 1.521 30 42.67 38.63 1.880 1.464 34 47.75 37.19 1.980 1.436 36 50.29 36.47 2.180 1.379 40 55.37 35.03 H 2.380 1.322 44 60.45 33.58 2.680 1.236 50 68.07 31.39 3.180 1.094 60 80.77 27.79 3.380 1.037 64 85.85 26.34 C Note: Cannot be used together with a strain relief. Universal I/O Latches Material and Finish ±.002 .236 .108 Polyester, black ±0.05 Dimensions [5.99] [2.74 ] Mates to Part Receptacles Number FG .416 .768 Related Product Data Without Strain Relief 111451-1 10.57 19.51 Universal I/O Pin Connectors — F .576 .928 With Strain Relief 111451-3 pages 45 and 46 14.63 23.57 Latch Removal Tool Part Number 91269-1 G .335 Military Polarizers [8.51] .134 [3.40] Material and Finish Thermoplastic, black Break Line Related Product Data Throw-Away Tab Universal I/O Pin Connectors — Part Numbers: pages 45 and 46 Break Line 499991-2 (packaged, 50 per bag) 499991-3 (packaged, 1000 per box) The snap-in polarizer .335 .134 [8.51] provides military polarization. [3.40] Note: All part numbers are RoHS compliant. 63 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Accessories (Continued) Keying Plugs Material and Finish Thermoplastic, see table for color Keying Plug Plug (Installed in Contact) Typical Application Key Plug 111620-1 There are ten key plugs on a comb .500 .245 .029 [12.70] [6.22] [0.58] .185 [4.70] Polarizing Key 1-1437023-2 Receptacle Catalog Keying Plug Style Color Connector Series Pages Part Number 2 mm 16, 17 111620-1 Comb Black Rcpt. Connectors 1-1437023-2 609 Series Female 54, 55 Single Blue Socket Connectors T&B 609-0000 (Ref.) 1-1437023-2 622 Series Female 52, 53 Single Blue Socket Connectors T&B 609-0000 (Ref.) 1-1437023-2 636 Series Female 52, 53 Single Blue Socket Connectors T&B 609-0000 (Ref.) Order by TE Part Number only. Note: All part numbers are RoHS compliant. 64 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Accessories Accessories Ribbon Cable Interconnect Solutions Accessories (Continued) Keying Plugs (Continued) Material and Finish Thermoplastic, see table for color Receptacle Catalog Keying Plug Style Color Connector Series Pages Part Number 499712-1 Single Novo Part Number 499712-1 48-51 Black Connectors 104072-1 Comb 499712-1 Single Ultra ATA Bus 13-15 Black Connectors 104072-1 Comb Order by TE Part Number only. Key Plug (Plugs into Contact) Alternate Configuration Keying Plug Part No. 104072-1 (10 Keying Plugs per Comb) Note: All part numbers are RoHS compliant. 65 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Accessories (Continued) Pull Loops, Permanent (for Receptacles and Pin Connectors) Material and Finish Natural color PVC, 94-VTM-1 rating (thin material) Related Product Data Use with: Female Socket Connectors — pages 52-55 Ultra ATA Bus Connectors — pages 13-15 2 mm Receptacle Connectors — pages 16 and 17 Novo Connectors — pages 48-51 Note: This pull loop is installed manually between the cover and strain relief, and cannot be used without strain relief. No. of Positions Dimension Pull Loop Female Socket Ultra ATA 2 mm Novo A Part No. Conns. Bus Conns. Rcpt. Conns. Conns. .44 10 — 12, 14, 16 10 5088450-2 11.18 .64 14 — 20 14 5088450-3 16.26 .74 16 — 22 16 5088450-4 18.80 .88 20 — 24, 26 20 5088450-5 22.35 1.08 24 —— 24 5088450-6 27.43 1.18 26 — 30, 34, 40 26 5088450-7 29.97 1.38 30 —— 30 1-5088450-2 35.05 1.58 34 — 44 34 5088450-8 40.13 1.82 40 40 50 40 5088450-9 46.23 2.32 50 —— 50 1-5088450-0 58.93 2.80 60 —— 60 1-5088450-1 71.12 Note: All part numbers are RoHS compliant. 66 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Accessories Accessories Ribbon Cable Interconnect Solutions Accessories (Continued) ±.004 .313 C Strain Relief for Universal Dimensions No. of Part ±0.10 [7.95 ] Pos. Number AB C I/O Pin Connectors Without Typ. .520 .766 .940 Mounting Ears 10 111547-1 13.21 19.46 23.88 .720 .966 1.140 A ±.002 .098 14 111547-2 .330 18.29 24.54 28.96 Material and Finish ±0.05 [2.49 ] [8.38] .820 1.066 1.240 2 Plc. Glass-filled polyester, black Typ. 16 111547-3 20.83 27.08 31.50 1.020 1.266 1.440 20 111547-4 Related Product Data 25.91 32.16 36.58 B Universal I/O Pin Connectors — 1.220 1.466 1.640 24 111547-5 30.99 37.24 41.66 page 45 1.320 1.566 1.740 26 111547-6 33.53 39.78 44.20 1.520 1.766 1.940 30 111547-7 38.61 44.86 49.28 1.720 1.966 2.140 34 111547-8 43.69 49.94 54.36 2.020 2.266 2.440 40 111547-9 51.31 57.56 61.98 2.220 2.466 2.640 44 1-111547-0 56.39 62.64 67.06 2.520 2.766 2.940 50 1-111547-1 64.01 70.26 74.68 3.020 3.266 3.440 60 1-111547-2 76.71 82.96 87.38 3.220 3.466 3.640 64 1-111547-3 81.79 88.04 92.56 Strain Relief for 609 Series (Tulip Contact) Female Socket Connectors Material and Finish Glass-filled polyester, blue Part Number No. of Dimension Type T&B Pos. A TE Connectivity (Ref. Only) Related Product Data .472 Female Socket Connectors — 6 Standard 2-1437020-1 609-0631 11.99 page 54 and 55 Heavy Duty 3-1437020-7 609-1031HD .240 .672 10 A [6.10] 17.07 Standard 3-1437020-5 609-1031 Heavy Duty 5-1437020-1 609-1431HD .872 14 22.15 Standard 4-1437020-9 609-1431 Heavy Duty 6-1437020-6 609-1631HD .972 16 24.69 Standard 6-1437020-4 609-1631 Heavy Duty 8-1437020-6 609-2031HD 1.172 20 29.77 Standard 8-1437020-4 609-2031 .565 1.372 [14.35] 24 Standard 9-1437020-4 609-2431 34.85 Heavy Duty 1-1437021-2 609-2631HD 1.472 26 37.39 Standard Version Standard 1-1437021-0 609-2631 Heavy Duty 3-1437021-2 609-3431HD 1.872 34 47.55 Standard 3-1437021-0 609-3431 .240 A [6.10] Heavy Duty 5-1437021-5 609-4031HD 2.172 40 55.17 Standard 5-1437021-3 609-4031 Heavy Duty 8-1437021-1 609-5031HD 2.672 50 67.87 Standard 7-1437021-9 609-5031 3.372 64 Heavy Duty 1-1437022-3 609-6431HD 85.65 Note: Heavy duty part numbers are listed on TE customer drawing .570 3-1437020-7. Standard part numbers are listed on TE customer [14.46] drawing 2-1437020-1. All part numbers are RoHS compliant. Heavy Duty Version 67 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Accessories (Continued) A Strain Relief for Novo and Dimensions No. of Part Pos. Number AB Ultra ATA Bus Connectors .534 .690 10 499252-5 13.56 17.53 Material and Finish .734 .890 14 499252-9 18.64 22.61 Glass-filled polyester, black .240 .834 .990 B 16 499252-8 [6.10] 21.18 25.15 Related Product Data 1.034 1.190 .186 .106 20 499252-2 26.26 30.23 Novo Connectors — pages 48-51 [4.72] [2.69] 1.234 1.390 Ref. Ultra ATA Bus Connectors — 24 1-499252-0 31.34 35.31 pages 13-15 .581 1.334 1.490 26 499252-3 [14.76] 33.88 37.85 Ref. 1.534 1.690 30 1-499252-2 38.96 42.93 1.734 1.890 34 499252-6 44.04 48.01 2.034 2.190 40 499252-1* 51.66 55.63 2.234 2.390 44 1-499252-1 56.74 60.71 2.534 2.690 50 499252-4 64.36 68.33 3.034 3.190 60 499252-7 77.06 81.03 3.234 3.390 64 1-499252-3 82.14 86.11 *Ultra ATA Strain Relief is 499252-1 only. Strain Relief for 2 mm Dimensions No. of Part Receptacle Connectors Pos. Number AB .440 .314 8 1-111614-6 11.18 7.98 .015 .130 Material and Finish Rad. Typ. .518 .392 [0.38] [3.30] 10 111614-1 Glass-filled polyester, black 13.16 9.96 B .596 .470 Typ. 12 1-111614-7 15.14 11.94 .132 Related Product Data [3.35] .201 .676 .550 Typ. A 14 111614-2 Typ. [5.11] 2 mm Receptacle Connectors — 17.17 13.97 pages 16 and 17 .755 .629 16 111614-3 19.18 15.98 .276 .912 .786 [7.01] 20 111614-4 23.16 19.96 Typ. .161 Typ. .991 .865 [4.09] 22 1-111614-5 .030 25.17 21.97 Typ. .056 [0.76] .139 Typ. .020 Typ. 1.070 .944 [1.42] Typ. [3.53] 24 111614-5 [0.51] .082 27.18 23.98 Typ. [2.08] .040 1.148 1.022 26 111614-6 Typ. [1.02] 29.16 25.96 1.306 1.180 30 111614-7 33.17 29.97 1.463 1.337 34 111614-8 37.16 33.96 1.700 1.574 40 111614-9 43.18 39.98 1.857 1.731 44 1-111614-0 47.17 43.97 2.093 1.967 50 1-111614-1 53.16 49.96 Note: All part numbers are RoHS compliant. 68 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Accessories Accessories Ribbon Cable Interconnect Solutions Accessories (Continued) Strain Relief for 622 and 636 Series Female Socket A Connectors Material and Finish Glass-filled PBT, see table for color .236 [6.00] Related Product Data Female Socket Connectors — pages 52 and 53 .555 [14.10] Part Number No. of Dimension Color T&B Pos. C TE Connectivity (Ref. Only) Blue 2-1437023-9 622-0631 .477 6 12.12 Black 1-1437026-9 636-0631 Blue 4-1437023-7 622-1031 .677 10 17.20 Black 3-1437026-9 636-1031 Blue 7-1437023-1 622-1431 .877 14 22.28 Black 6-1437026-6 636-1431 Blue 8-1437023-9 622-1631 .977 16 24.82 Black 8-1437026-5 636-1631 Blue 1437024-5 622-2031 1.177 20 29.90 Black 1437027-7 636-2031 Blue 1-1437024-6 622-2431 1.377 24 34.98 Black 5-1437011-3 636-2431 Blue 2-1437024-8 622-2631 1.477 26 37.52 Black 3-1437027-4 636-2631 Blue 4-1437024-0 622-3031 1.677 30 42.60 Black 6-1437011-6 636-3031 Blue 5-1437024-3 622-3431 1.877 34 47.68 Black 8-1437027-0 636-3431 Blue 8-1437024-3 622-4031 2.177 40 55.30 Black 3-1437028-4 636-4031 Blue 1-1437025-2 622-5031 2.677 50 68.00 Black 6-1437028-8 636-5031 3.177 60 Black 9-1437028-5 636-6031 80.70 Blue 4-1437025-0 622-6431 3.377 64 85.78 Black 1437029-2 636-6431 Note: These part numbers are listed on TE customer drawing 1-1437026-9. Note: All part numbers are RoHS compliant. 69 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Ribbon Cable Assembly Machines (R-CAM) Product Facts
Terminates 28 AWG [0.08 mm2] .050 [1.27] centerline and 30 AWG [0.05 mm2] .025 [0.64] centerline cable to a variety of connectors
Automatic in-process electrical testing — tests all circuits for opens, shorts and high-voltage breakdown (up to 1,000 volts for receptacles, 800 volts for card edge connectors and 300 volts for .025 [0.64] centerline connectors); rejects cable assemblies failing any of these tests
Operated by a user-friendly, interactive touchscreen — or a keyboard on the R-CAM 4
Self-diagnostics shut down the machine when a malfunction occurs, pinpoint the malfunction, and identify it on the screen
Produced under a Quality Management System The R-CAM 4, pictured machine and connector 50 or 60 Hz. Model 4 oper- certified to ISO 9001 above, is the newest fully style. The purpose of this ates at 120 or 220 VAC, 50- A copy of the automatic Ribbon Cable test is to detect gaps that 60 Hz, single phase, 15A. certificate is available Assembly Machine for may have been created dur- upon request. The R-CAM 2A and 3A producing and testing ing assembly that could require a minimum air sup- daisy-chained ribbon cable eventually short out when ply of 80 psi [5.52 bar] at assemblies. Enhancements in use. If an assembly fails 3 8 scfm [0.0038m /s]. The of this model include the any of these tests, the R-CAM 4 requires 80 psi capability to process pre- machine will shear the [5.52 bar] at 12 scfm manufactured slit-and-twist cable off at that point and 3 [0.0057 m /s]. cable and the ability to automatically discard it into produce assemblies with up an alternate bin. to 10 connectors. Need more information? These machines are pro- For more information, The R-CAM 2A, 3A, and grammed and operated specifically about tooling, 4 terminate 28 AWG with an interactive touch- 2 call TE at the numbers listed [0.08 mm ], .050 [1.27] screen that allows operators below. centerline cable to a variety to access manual, set-up, of connectors. The R-CAM 4 run, and edit modes will also terminate 30 AWG through easy-to-follow 2 [0.05 mm ] .025 [0.64] cen- menu-driven prompts. terline cable. Self-diagnostics shut All of the R-CAM models down the machine if a automatically perform an malfunction — such as in-process electrical test of misloaded connectors or all circuits for opens and incorrectly fed cable — shorts. In addition, all mod- is detected, pinpoint the els automatically test the malfunction, and identify it assembly for high-voltage on the touchscreen. breakdown up to 1,000 Models 2A and 3A are avail- volts, depending on the able in 120 or 220 VAC, 8 A, 70 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 ISO 9001 Certified Application Tooling Application Tooling Ribbon Cable Interconnect Solutions Comparison of R-CAM 2A, R-CAM 3A and R-CAM 4 Machine Model R-CAM 2A R-CAM 3A R-CAM 4 Part Number* 760700- 761900- 318800- 2 2 2 28 AWG [0.08 mm ], 28 AWG [0.08 mm ], 28 AWG [0.08 mm ], .050 [1.27] centerline .050 [1.27] centerline .050 [1.27] centerline and Cable Size 2 30 AWG [0.05 mm ], .025 [0.64] centerline Maximum cable length of 48 [1 220] Maximum cable length of 105 [2 665] Maximum cable length of 100 [2 540] Produces one- to four-connector assem- Produces one- or two-connector assem- Produces one- to 10-connector assem- blies with unterminated tail lengths up to blies with unterminated tail lengths up to blies with unterminated tail lengths up to 12 [305] 24 [610] 24 [610] Cable Assembly Configurations Trailing connectors can be oriented up or Trailing connectors can be oriented up or Trailing connectors can be oriented up or (Refer to page 73) down down down Automatically processes and tests — — assemblies produced with pre- manufactured slit-and-twist cable Depending on cable lengths, can apply Depending on cable lengths, can apply Depending on cable lengths, can apply Production Rates and test up to 1 670 connectors per hour and test up to 2 000 connectors per hour and test up to 1 050 connectors per hour (Refer to page 72) 108 [2 745] W x 54 [1 370] D x 48 [1 220] W x 48 [1 220] D x 68 [1 730] W x 58 [1 475] D x Size 60 [1 525] H; 750 lb [340 kg] 62 [1 575] H; 630 lb [286 kg] 72 [1 830] H; 1 300 lb [590 kg] Operated and programmed by a Operated and programmed by a Operated and programmed by a touchscreen touchscreen touchscreen or a keyboard Parameters for up to 130 cable assem- Parameters for up to 150 cable assem- Parameters for up to 1 000 cable assem- Programmable blies can be retained in memory blies can be retained in memory blies can be retained in memory Another menu displays production totals Another menu displays production totals — or a log of the machine events or a log of the machine events Automatically stops after each or three Automatically stops when either a con- Automatically stops each time a consecutive assemblies are rejected, as secutive number of assemblies or a malfunction is detected Testing programmed by the operator percentage of the batch run are rejected, as programmed by the operator Requires an average of 25 minutes, Requires an average of 15 minutes, Requires an average of 20 minutes to Changeover depending on assembly size depending on assembly size 1 hour, depending on assembly size and type *Note: Machine may require accessories. Before ordering, contact TE at the numbers listed below. 71 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Typical Production Rates (Assemblies/Hour) Length Machine Connectors Model Per Assembly 4 [100] 8 [205] 24 [160] 48 [1 220] 100 [2 540] 1 665 620 —— — 2 570 500 405 300 — R-CAM 2A 3 475 460 375 280 — 4— 420 360 255 — R-CAM 3A 2 1 075 950 780 660 500 4 — 275 265 255 — 5 — 205 200 190 — R-CAM 4 6— 170 165 160 — 10 —— — 115 105 Note: Actual production rates may vary depending on the cable assembly configuration. Available Tooling Note: Call TE at the numbers listed below for part numbers or availability. Number of Positions Tooling for Connectors  R-CAM 2A R-CAM 3A R-CAM 4 Ultra Novo Receptacles —— 40 AMPLIMITE .050 Series Connectors —— 68 Plugs 68 and 80 (Lead and Trail Modules) AMPLIMITE HDF-20 D-Sub. 15, 25, 37 9, 15, 25, 37 Receptacles 68 and 80 (Lead Module Only) .100 x .100 DIP Plugs One End Only, 20–64 One End Only, 10–64 Available in future 20–50 Card Edge Connectors* 20–64 10–64 (10–64 Available in future) Novo Receptacles* 20–64 10–64 10-64 2 mm Receptacles — 12–50 — Universal I/O Pin Connectors One End Only, 20–64 — Trail Module Only * Supplied with the R-CAM 2A and R-CAM 3A only.  Reel fed version.  Order Connector Specific Tooling Packages / Feed Shear Tooling separately. Products Applied AMPLIMITE HDF-20 D-Sub. Plugs AMPLIMITE HDF-20 D-Sub. Receptacles .100 x .100 DIP Plugs Card Edge Connectors Novo Receptacles 2 mm Receptacles Universal I/O Pin Connectors Pre-manufactured Slit-and-Twist Cable (R-CAM 4 only) Note: For more product information, call TE at the numbers listed below. 72 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Application Tooling Application Tooling Ribbon Cable Interconnect Solutions Cable Assembly Configurations R-CAM 2A 2.70 to 8 [70 to 205] end-to-end 2.70 to 48 [70 to 1 220] end-to-end 0 to 8 1.50 Min. [0 to 205] [35 Min.] center-to-center R-CAM 3A 1.74 to 105 [45 to 2 665] end-to-end 0 to 24 1.74 to 105 [0 to 610] [45 to 2 665] end-to-end 0 to 24 1.74 to 105 [0 to 610] [45 to 2 665] end-to-end R-CAM 4 1.60 to 100 [40 to 2 540] center-to-end 1.60 to 100 [40 to 2 540] center-to-center 0 to 24 1.60 Min. 1.25 Min. 3 Min. [0 to 610] [40 Min.] [30 Min.] [75 Min.] center-to-center center-to-center center-to-center 73 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Application Tooling Manual Arbor Frame Assembly, Hand Tool Kit—Part No. 768340-1 Part No. 91085-2 Terminating kit for .050 [1.27] centerline ribbon cable with 2 28 or 26 AWG [0.08 or 0.15 mm ] stranded or solid, or Bench frame for applying a 2 30 AWG [0.05 mm ] solid conductors. Includes commercial variety of IDC connectors, grade hand tool with ratchet control for complete termination including AMPMODU MT cycle, base assembly, bench-mount, tooling sets for stan- and CHAMP. Features dard and Novo receptacles, card edge connectors and D- adjustable ram and handle, Sub HDF low-profile connectors, and a carrying case. and a slide base. Tooling is mounted to the ram and into the tracks of the base plate. Tooling Instruction Sheets 408-7777—Manual Arbor Frame Assembly 408-6732—Pneumatic Auto-Cycle Assembly 408-9828—Hand Tool Kit 768340-1 for Connector-Specific Kits Pneumatic Foot Pedal Unit Pneumatic Auto-Cycle Part No. 91112-2 Unit, Part No. 91112-3 Foot pedal indicates cycle— Basically an air-powered features adjustable ram and version of Manual Arbor cycle time. Frame Assembly 91085-2. Features adjustable ram and cycle time, and auto- matic cycling when the lower assembly is slid into the frame to the rear of the base plate. Includes a guard around the frame opening. 74 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Application Tooling Low Profile Headers Ribbon Cable Interconnect Solutions Low Profile Headers Product Facts
Available in selected positions 10 thru 60
Flame retardant, thermoplastic housings, 94V-0 rated
Vertical and right-angle versions available in double row configurations
Available in .025 [0.64] square drawn wire posts
Wash out clearance for flux removal
Mates with Ribbon Cable Connectors
Available with and without eject latches
Available with and without “kinked” soldertails for PCB retention Performance Technical Documents
Headers are recognized Characteristics Product Specifications under the Component 108-40018 Electrical Program of Underwriters Laboratories Inc. Insulation Resistance — R 5,000 megohms minimum initial File No. E28476 Dielectric Withstanding Voltage —
Headers are certified by 1,000 V rms at sea level Canadian Standards Current — 1 ampere maximum Association, R per contact File No. LR 7189 Operating Voltage — 250 VAC
Low profile IDC headers are recognized under the Environmental Component Program of Operating Temperature — Underwriters -65°C to +105°C R Laboratories Inc. File No. E60980, Vol. 5 75 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines +.000 -.010 Vertical PCB Mount A +0.00 [ ] -0.25 .045 .025 [0.64] Square Post [1.14] (Mating End) B Pin 1 .015 .130 .165 .010 [3.30] 0.38 [4.19] [ ] 0.25 .360 [9.14] ± .001 .025 .100 ± 0.03 [0.64 ] [2.54] Material and Finish Typ. Pin 2 Housing — Glass-filled nylon, UL 94V-0 rated, black Posts — Brass, plated as follows: Plating A — Duplex plated, gold flash ± .001 .025 over palladium-nickel, .000030 ± 0.03 [0.64 ] [0.00076] min. total on mating surfaces, .000100 [0.00254] min. tin on solder .041 .388 area, with entire post underplated [1.04] [9.86] ± .015 .120 .000050 [0.00127] min. nickel ± 0.38 [3.05 ] or .000030 [0.00076] min. gold on .240 mating surfaces, .000100 [0.00254] [6.10] min. tin on solder area, with entire post underplated .000050 [0.00127] min. .100 nickel [2.54] ± .010 .185 .185 Typ. ± 0.25 [4.70] Plating B — Duplex plated, gold flash [4.70 ] over palladium-nickel, .000015 [0.00038] min. total on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel .100 Typ. [2.54] or .000015 [0.00038] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel .100 [2.54] ± .003 .035 ± 0.08 [0.89 ] Related Product Data Dia. Typ. Electrical Characteristics — Recommended PC Board Hole Layout page 75 For Manual Insertion Mateable Connectors — AMPMODU Wire-Applied Receptacles AMPMODU Board Mount Receptacles Dimensions Post Plating/Part Nos. No. of Short Point Wire-Applied Pos. AB Plating A Plating B Connectors 10 .800 [20.32] .400 [10.16] 5103309-1 5103308-1 Novo Receptacles and Female 14 1.000 [25.40] .600 [15.24] 5103309-2 5103308-2 Socket Connectors, 609, 622 and 16 1.100 [27.94] .700 [17.78] 5103309-3 5103308-3 636 Series — 20 1.300 [33.02] .900 [22.86] 5103309-5 5103308-5 pages 48-55 24 1.500 [38.10] 1.100 [27.94] — 1-5103308-3 26 1.600 [40.64] 1.200 [30.48] 5103309-6 5103308-6 34 2.000 [50.80] 1.600 [40.64] 5103309-7 5103308-7 40 2.300 [58.42] 1.900 [48.26] 5103309-8 5103308-8 50 2.800 [71.12] 2.400 [60.96] 1-5103309-0 1-5103308-0 60 3.300 [83.82] 2.900 [73.66] — 1-5103308-2 Note: All part numbers are RoHS compliant. 76 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Low Profile Headers Low Profile Headers Ribbon Cable Interconnect Solutions Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Right-Angle PCB Mount Position No.1 .025 [0.64] Square Post Indicator (Mating End) • .388 [9.86] .165 [4.19] ± .001 .025 Typ. ± 0.03 [0.64 ] +.000 Material and Finish -.010 A +0.00 Housing — Glass-filled nylon, [ ] -0.25 Pin 1 UL 94V-0 rated, black B Posts — Brass, plated as follows: .240 .100 Plating A — Duplex plated, gold flash [6.09] .130 [2.54] Typ. over palladium-nickel, .000030 [3.31] [0.00076] min. total on mating surfaces, ± .001 .025 .000100 [0.00254] min. tin on solder .360 ± 0.03 [.635 ] [9.14] area, with entire post underplated Typ. +.020 .000050 [0.00127] min. nickel .135 -.010 +0.51 or .000030 [0.00076] min. gold on 3.42 [ ] -0.25 mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post .015 ± .010 .185 .185 underplated .000050 [0.00127] min. .010 Typ. ± 0.25 [4.69 ] [4.69] .100 0.38 nickel Pin 2 Typ. [ ] [2.54] 0.25 .123 Plating B — Duplex plated, gold flash [3.12] over palladium-nickel, .000015 [0.00038] min. total on mating surfaces, .000100 [0.00254] min. tin on solder .100 area, with entire post underplated Typ. [2.54] .000050 [0.00127] min. nickel or .000015 [0.00038] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post .100 ± .003 .035 underplated .000050 [0.00127] min. ± 0.08 [2.54] [0.89 ] nickel Dia. Typ. Recommended PC Board Hole Layout Related Product Data For Manual Insertion Electrical Characteristics — page 75 Mateable Connectors — AMPMODU Wire-Applied Receptacles Short Point Wire-Applied Dimensions Post Plating/Part Nos. Connectors No. of Pos. AB Plating A Plating B Novo Receptacles and Female 10 .800 [20.32] .400 [10.16] 5103311-1 5103310-1 Socket Connectors, 609, 622 and 636 Series — pages 48-55 14 1.000 [25.40] .600 [15.24] 5103311-2 5103310-2 16 1.100 [27.94] .700 [17.78] 5103311-3 5103310-3 20 1.300 [33.02] .900 [22.86] 5103311-5 5103310-5 26 1.600 [40.64] 1.200 [30.48] 5103311-6 5103310-6 34 2.000 [50.80] 1.600 [40.64] 5103311-7 5103310-7 40 2.300 [58.42] 1.900 [48.26] 5103311-8 5103310-8 50 2.800 [71.12] 2.400 [60.96] 1-5103311-0 1-5103310-0 60 3.300 [83.82] 2.900 [73.66] 1-5103311-2 — Note: All part numbers are RoHS compliant. 77 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines & “Kinked” Solder Tails for PCB Retention Vertical PCB Mount +.005 -.010 .025 [0.64] Square Post A +0.13 [ ] -0.25 .045 (Mating End) with Board [1.14] Retention Feature B Pin 1 .025 .130 .165 .020 [3.30] [4.19] 0.64 [ ] 0.51 .360 [9.14] .100 Material and Finish .025±.001 [2.54] [0.64±0.03] Housing — Glass-filled PPA, Typ. UL 94V-0 rated, black Pin 2 Posts — Brass, plated as follows: ± .001 .025 Plating — Duplex plated, gold flash ± 0.03 [0.64 ] over palladium-nickel, .000015 [0.00038] min. total on mating surfaces, .041 .000100 [0.00254] min. tin on solder ± .015 .120 [1.04] .388 area, with entire post underplated ± 0.38 [3.05 ] [9.86] .000050 [0.00127] min. nickel .240 or .000015 [0.00038] min. gold on [6.10] mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post .100 underplated .000050 [0.00127] min. [2.54] nickel .185 .185 2 Plcs. [4.69] [4.69] 2 Plcs. Related Product Data .100 Typ. Electrical Characteristics — [2.54] page 75 Mateable Connectors — AMPMODU Wire-Applied Receptacles .100 AMPMODU Board Mount ± .003 [2.54] .040 ± 0.08 [1.02 ] Receptacles Dia. Typ. Short Point Wire-Applied Connectors Recommended PC Board Hole Layout Novo Receptacles and Female For Manual Insertion Socket Connectors, 609, 622 and 636 Series — pages 48-55 Dimensions No. of Post Plating Pos. Part Nos. AB 10 .800 [20.32] .400 [10.16] 5104338-1 14 1.000 [25.40] .600 [15.24] 5104338-2 16 1.100 [27.94] .700 [17.78] 5104338-3 20 1.300 [33.02] .900 [22.86] 5104338-4 24 1.500 [38.10] 1.100 [27.94] 5104338-5 26 1.600 [40.64] 1.200 [30.48] 5104338-6 34 2.000 [50.80] 1.600 [40.64] 5104338-7 40 2.300 [58.42] 1.900 [48.26] 5104338-8 50 2.800 [71.12] 2.400 [60.96] 5104338-9 60 3.300 [83.82] 2.900 [73.66] 1-5104338-0 Note: All part numbers are RoHS compliant. 78 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Low Profile Headers Low Profile Headers Ribbon Cable Interconnect Solutions Low Profile Pin Headers, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines & “Kinked” Solder Tails for PCB Retention (Continued) Position No.1 Right-Angle PCB Mount Indicator .025 [0.64] Square Post (Mating End) with Board • Retention Feature .388 [9.86] .165 ±.001 .025 [4.19] Typ. ±0.03 [0.64 ] +.005 -.010 A +0.13 Pin 1 [ ] -0.25 .045 2 Plcs. B [1.14] .240 .130 [6.09] Typ. Material and Finish [3.30] .100 Housing — Glass-filled PPA, [2.54] .025±.001 .360 UL 94V-0 rated, black [.635±0.03] +.020 [9.14] .125 Typ. Posts — Brass, plated as follows: -.010 +0.51 3.18 [ ] Plating — Duplex plated, gold flash -0.25 over palladium-nickel, .000015 .025 [0.00038] min. total on mating surfaces, .020 .185 .185 0.64 .000100 [0.00254] min. tin on solder 2 Plcs. [4.69] [ ] 0.51 [4.69] .100 area, with entire post underplated 2 Plcs. Pin 2 [2.54] .000050 [0.00127] min. nickel .123 [3.12] or .000015 [0.00038] min. gold on mating surfaces, .000100 [0.00254] .100 min. tin on solder area, with entire post Typ. [2.54] underplated .000050 [0.00127] min. nickel Related Product Data .100 [2.54] Electrical Characteristics — .040±.003 [1.02±0.08] page 75 Dia. Typ. Mateable Connectors — Recommended PC Board Hole Layout AMPMODU Wire-Applied For Manual Insertion Receptacles Short Point Wire-Applied Connectors Novo Receptacles and Female Socket Connectors, 609, 622 and 636 Series — pages 48-55 Dimensions No. of Post Plating Pos. Part Nos. AB 10 .800 [20.32] .400 [10.16] 5104340-1 14 1.000 [25.40] .600 [15.24] 5104340-2 16 1.100 [27.94] .700 [17.78] 5104340-3 20 1.300 [33.02] .900 [22.86] 5104340-4 24 1.500 [38.10] 1.100 [27.94] 5104340-5 34 2.000 [50.80] 1.600 [40.64] 5104340-7 40 2.300 [58.42] 1.900 [48.26] 5104340-8 50 2.800 [71.12] 2.400 [60.96] 5104340-9 Note: All part numbers are RoHS compliant. 79 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches, Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines Vertical PCB Mount .025 [0.64] Square Post B Pin 2 (Mating End) .362 ± .006 .254 [9.19] ± 0.15 [6.45 ] .100 Pin 1 [2.54] Position #1 Indicator ± .001 .025 ± 0.03 [0.64 ] ± .001 .025 ± .012 .888 ± 0.03 Material and Finish [0.64 ] ± 0.30 [22.56 ] Latching Latch For Long Height Housing — Glass-filled PBT, Eject Latch .575 UL 94V-0 rated, black Long ± .012 [14.61] .728 Posts — Brass or phosphor bronze, ± 0.30 .427 [18.49 ] Short Housing [10.85] For Short plated as follows: ± .006 .404 Eject Latch ± 0.15 Plating — Duplex plated, gold flash [10.26 ] ± .007 over palladium-nickel, .000030 .237 ± 0.18 [6.02 ] [0.00076] min. total on mating surfaces, .000100 [0.00254] min. tin on solder Post area, with entire post underplated ± .015 .102 .000050 [0.00127] min. nickel A Ø .031 ± 0.38 [2.59 ] Max. [0.79] or .000030 [0.00076] min. gold on mating surfaces, .000100 [0.00254] .100 min. tin on solder area, with entire post [2.54] underplated .000050 [0.00127] min. nickel .100 ± .003 Ø .035 Related Product Data [2.54] ± 0.08 [0.89 ] Electrical Characteristics — page 75 Recommended PC Board Layout Mateable Connectors — Novo Receptacles and Female Socket Connectors, 609, 622 and 636 Series — pages 48-55 Part Numbers Dimensions No. of Pin Header with Short Latches Pin Header with Long Latches Pos. AB (Mates with Receptacles (Mates with Receptacles without Strain Relief) with Strain Relief) .800 .400 10 1761608-3 1761606-3 20.32 10.16 1.000 .600 14 1761608-5 1761606-5 25.40 15.24 1.100 .700 16 1761608-6 1761606-6 27.94 17.78 1.300 .900 20 1761608-7 1761606-7 33.02 22.86 1.500 1.100 24 1761608-8 1761606-8 38.10 27.94 1.600 1.200 26 1761608-9 1761606-9 40.64 30.48 1.800 1.400 30 — 1-1761606-0 45.72 35.56 2.000 1.600 34 1-1761608-1 1-1761606-1 50.80 40.64 2.300 1.900 40 1-1761608-3 1-1761606-3 58.42 48.26 2.800 2.400 50 1-1761608-5 1-1761606-5 71.12 60.96 3.300 2.900 60 1-1761608-6 1-1761606-6 83.82 73.66 Note: All part numbers are RoHS compliant. 80 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 IDC Low Profile Headers IDC Low Profile Headers Ribbon Cable Interconnect Solutions IDC Low Profile Ejection Style Pin Headers with Die Cast Ejection Latches, Military and Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Right-Angle PCB Mount .025 [0.64] Square Post B (Mating End) Pin 2 .362 ± .006 .254 [9.19] ± 0.15 [6.45 ] .100 Pin 1 [2.54] Latching Height ± .001 .025 Position #1 Indicator .575 ± 0.03 Long [0.64 ] [14.61] Material and Finish .427 Short ± .001 .025 [10.85] ± 0.03 [0.64 ] Housing — Glass-filled PBT, ± .012 .888 Latch UL 94V-0 rated, black ± 0.30 [22.56 ] For Long Posts — Brass or phosphor bronze, U Eject Latch plated as follows: ± .012 .728 ± .007 Housing .237 Plating — Duplex plated, gold flash ± 0.30 [18.49 ] .030 ± 0.18 ± .006 [6.02 ] .404 over palladium-nickel, .000030 For Short [0.76] ± 0.15 [10.26 ] Eject Latch [0.00076] min. total on mating surfaces, .000100 [0.00254] min. tin on solder area, with entire post underplated .000050 [0.00127] min. nickel Post .100 ± .010 U .102 or .000030 [0.00076] min. gold on [2.54] ± 0.25 [2.59 ] mating surfaces, .000100 [0.00254] A Ø .031 Max. min. tin on solder area, with entire post [0.79] Section U-U underplated .000050 [0.00127] min. nickel .100 [2.54] Related Product Data Electrical Characteristics — page 75 .100 ± .003 Ø .035 [2.54] Mateable Connectors — ± 0.08 [0.89 ] Novo Receptacles and Female Socket Connectors, 609, 622 and Recommended PC Board Layout 636 Series — pages 48-55 Part Numbers Dimensions No. of Pin Header with Short Latches Pin Header with Long Latches Pos. AB (Mates with Receptacles (Mates with Receptacles without Strain Relief) with Strain Relief) .800 .400 10 1761609-3 1761607-3 20.32 10.16 1.000 .600 14 1761609-5 1761607-5 25.40 15.24 1.100 .700 16 1761609-6 1761607-6 27.94 17.78 1.300 .900 20 1761609-7 1761607-7 33.02 22.86 1.600 1.200 26 1761609-9 1761607-9 40.64 30.48 2.000 1.600 34 1-1761609-1 1-1761607-1 50.80 40.64 2.300 1.900 40 1-1761609-3 1-1761607-3 58.42 48.26 2.800 2.400 50 1-1761609-5 1-1761607-5 71.12 60.96 3.300 2.900 60 1-1761609-6 1-1761607-6 83.82 73.66 Note: All part numbers are RoHS compliant. 81 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions IDC Low Profile Ejection Style Pin Headers, Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines .013 B Vertical PCB Mount [0.33] Pin 2 .025 [0.64] Square Post (Mating End) + .010 + .005 .252 .350 – .004 – .010 + 0.25 + 0.13 [6.40 ] [8.89 ] – 0.10 – 0.25 .100 Pin 1 [2.54] A ± .001 .025 ± .001 Eject Latches .025 ± 0.03 [0.63 ] ± 0.03 Not Shown in [0.63 ] Top and Side View for Clarity U ± .020 .826 Long ± 0.51 [20.98 ] ± .020 .665 Short ± .010 ± 0.51 .240 Material and Finish [16.89 ] .350 ± 0.25 [6.10 ] .013 [8.89] Housing and Eject Latches — [0.33] PBT, UL 94V-0 rated, blue Posts — Phosphor bronze, plated as ± .006 .576 Long follows: ± 0.15 [14.62 ] Ø .031 ± .015 ± .006 Position #1 Indicator U .419 C Plating — Duplex plated, .000030 Short [0.79] ± 0.38 ± 0.15 [ ] [10.64 ] With Latches Max. [0.00076] min. gold on mating surfaces, .000100 [0.00254] min. tin on solder A Section U-U ± .001 .025 area, with entire post underplated ± 0.03 [0.63 ] U .000050 [0.00127] min. nickel .350 .013 Related Product Data [8.89] [0.33] Electrical Characteristics — page 75 Mateable Connectors — Position #1 Indicator U Novo Receptacles and Female Without Latches Socket Connectors, 609, 622 and .100 636 Series — pages 48-55 [2.54] .100 ± .003 Ø .035 [2.54] ± 0.08 [0.89 ] Recommended PC Board Layout Part Numbers Dim. C Dimensions No. of Pin Header Pin Header with Short Latches Pin Header with Long Latches (Soldertail Pos. AB without (Mates with Receptacles (Mates with Receptacles Length) Latches without Strain Relief) with Strain Relief) 10 1.250 [31.75] .400 [10.16] 1761693-3 1761685-3 1761686-3 14 1.450 [36.83] .600 [15.24]—— 1761686-5 16 1.550 [39.37] .700 [17.78] — 1761685-6 1761686-6 20 1.750 [44.45] .900 [22.86] — 1761685-7 1761686-7 24 1.950[49.53] 1.100 [27.94] 1761693-8 1761685-8 1761686-8 .102 26 2.050 [52.07] 1.200 [30.48] — 1761685-9 1761686-9 2.59 30 2.250 [57.15] 1.400 [35.56] — 1-1761685-0 — 34 2.450 [62.23] 1.600 [40.64] 1-1761693-1 1-1761685-1 1-1761686-1 40 2.750 [69.85] 1.900 [48.26] — 1-1761685-3 1-1761686-3 50 3.250 [82.55] 2.400 [60.96] — 1-1761685-5 1-1761686-5 60 3.750 [95.25] 2.900 [73.66] 1-1761693-6 1-1761685-6 — 10 1.250 [31.75] .400 [10.16] 1761694-3 1761687-3 — 14 1.450 [36.83] .600 [15.24]—— — 16 1.550 [39.37] .700 [17.78]—— — 20 1.750 [44.45] .900 [22.86] — 1761687-7 1761688-7 .165 24 1.950[49.53] 1.100 [27.94]—— 1761688-8 4.19 26 2.050 [52.07] 1.200 [30.48] 1761694-9 1761687-9 1761688-9 34 2.450 [62.23] 1.600 [40.64] — 1-1761687-1 1-1761688-1 40 2.750 [69.85] 1.900 [48.26] — 1-1761687-3 — 50 3.250 [82.55] 2.400 [60.96]—— 1-1761688-5 Note: All part numbers are RoHS compliant. 82 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 IDC Low Profile Headers IDC Low Profile Headers Ribbon Cable Interconnect Solutions IDC Low Profile Ejection Style Pin Headers, Center Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Right-Angle PCB Mount B .025 [0.64] Square Post .013 [0.33] Pin 2 (Mating End) + .010 + .005 .252 .350 – .004 – .010 + 0.25 + 0.13 [6.40 ] [8.89 ] – 0.10 – 0.25 .100 Pin 1 [2.54] A ± .001 .025 Eject Latches ± 0.03 [0.63 ] Not Shown in ± .001 .025 ± .020 .826 Top and Side ± 0.03 [0.63 ] ± 0.51 U [20.98 ] View for Clarity Material and Finish Long ± .020 .665 Housing and Eject Latches — .030 ± 0.51 [16.89 ] PBT, UL 94V-0 rated, blue .350 [0.76] .013 Short [8.89] .100 Posts — Phosphor bronze, plated as [0.33] [2.54] follows: ± .006 ± .010 Plating — Duplex plated, .000030 .576 .240 Long ± 0.15 ± 0.25 [14.62 ] [6.10 ] [0.00076] min. gold on mating surfaces, ± .006 Position #1 Indicator .419 U ± .015 .000100 [0.00254] min. tin on solder Short ± 0.15 C Ø .031 [10.64 ] ± 0.38 With Latches [ ] area, with entire post underplated [0.79] Max. .000050 [0.00127] min. nickel A Section U-U ± .001 .025 ± 0.03 [0.63 ] U Related Product Data Electrical Characteristics — .350 .013 page 75 [8.89] [0.33] Mateable Connectors — Novo Receptacles and Female Socket Connectors, 609, 622 and Position #1 Indicator U 636 Series — pages 48-55 Without Latches .100 [2.54] .100 ± .003 Ø .035 [2.54] ± 0.08 [0.89 ] Recommended PC Board Layout Part Numbers Dim. C Dimensions No. of Pin Header with Long Latches (Soldertail Pos. AB (Mates with Receptacles Length) with Strain Relief) 16 1.550 [39.37] .700 [17.78] 1761690-6 24 1.950[49.53] 1.100 [27.94] 1761690-8 .102 26 2.050 [52.07] 1.200 [30.48] 1761690-9 2.59 30 2.250 [57.15] 1.400 [35.56] 1-1761690-0 60 3.750 [95.25] 2.900 [73.66] 1-1761690-6 10 1.250 [31.75] .400 [10.16] 1761692-3 .165 34 2.450 [62.23] 1.600 [40.64] 1-1761692-1 4.19 40 2.750 [69.85] 1.900 [48.26] 1-1761692-3 Note: All part numbers are RoHS compliant. 83 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines Vertical PCB Mount .025 [0.64] Sq. Posts .100 Pin 2 [2.54] (Mating End) .150 [3.81] .165 .190 .240 Ø .025 .253 [4.19] [4.83] [6.10] [0.64] [6.43] .100 [2.54] .336 .315 [8.53] [8.00] .150 .050 .107 [3.81] .289 [1.27] [2.72] A [7.34] .110 .025 or [2.79] B [0.64] .155 Pin Header Pin 1 [3.94] C with Latches Solder Tail Position No.1 Indicator .025 .096 Dia. [0.64] [2.44] 2 Plc. • Pin Header .106 .549 [2.74] without Latches [13.94] Material and Finish D .195 Housing & Latches—Black PBT or [4.95] nylon, UL 94V-0 rated Contacts — Brass; duplex plated (See chart, page 85) Related Product Data Mateable Receptacles — Dimensions No. of pages 48-55 Positions AB C D E F Accessories — .700 1.100 1.260 .860 1.100 .400 10 17.78 27.94 32.00 21.84 27.94 10.16 Snap-In Polarizer — page 63 .900 1.300 1.460 1.060 1.300 .600 14 22.86 33.02 37.08 26.92 33.02 15.24 1.000 1.400 1.560 1.180 1.400 .700 Technical Documents 16 25.40 35.56 39.62 29.46 35.56 17.78 Product Specifications 1.200 1.600 1.760 1.360 1.800 .900 20 108-40018 Pin Headers 30.48 40.64 44.70 34.54 40.64 22.86 1.400 1.800 1.960 1.560 1.800 1.100 24 35.56 45.72 49.78 39.62 45.72 27.94 1.500 1.900 2.060 1.660 1.900 1.200 26 38.10 48.26 52.32 42.16 48.26 30.48 1.700 2.100 2.260 1.860 2.100 1.400 30 43.18 53.34 57.40 47.24 53.34 35.56 1.900 2.300 2.460 2.060 2.300 1.600 34 48.26 58.42 62.48 52.32 58.42 40.64 2.200 2.600 2.760 2.360 2.600 1.900 40 55.88 66.04 70.10 59.94 66.04 48.26 2.700 3.100 3.260 2.860 3.100 2.400 50 68.58 78.74 82.80 72.64 78.74 60.98 3.200 3.600 3.760 3.360 3.600 2.900 60 81.28 91.44 95.50 85.34 91.44 73.66 3.400 3.800 3.960 3.560 3.800 3.100 64 86.36 96.52 100.58 90.42 96.52 78.74 Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization), located as shown. Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown. Notes: 3. For information regarding latch/pin header applications and for ordering latches separately, refer to page 96. 84 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Military, Center and Dual Polarized, Vertical Mount Universal Ejection Style Pin Headers Military, Center and Dual Polarized, Vertical Mount Universal Ejection Style Pin Headers Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Vertical PCB Mount Pin Header w/ Pin Header w/ Contact Pin Header Short Latches Long Latches .025 [0.64] Sq. Posts Soldertail No. of Finish without (Mates with AMP-LATCH (Mates with AMP-LATCH Length Positions (Plating Latches Receptacles without Receptacles with (Mating End) (Continued) Code) Strain Relief) Strain Relief) A 5102153-1 5499910-1 5499922-1 10 B 5102154-1 5499160-1 5499206-1 A 5102153-2 5499910-2 5499922-2 14 B 5102154-2 5499160-2 5499206-2 A 5102153-3 5499910-3 5499922-3 16 B 5102154-3 5499160-3 5499206-3 A 5102153-4 5499910-4 5499922-4 20 B 5102154-4 5499160-4 5499206-4 A 5102153-5 5499910-5 5499922-5 24 B 5102154-5 — 5499206-5 A 5102153-6 5499910-6 5499922-6 26 B 5102154-6 5499160-6 5499206-6 .110 2.79 A 5102153-7 5499910-7 5499922-7 30 B 5102154-7 — 5499206-7 A 5102153-8 5499910-8 5499922-8 34 B 5102154-8 5499160-8 5499206-8 A 5102153-9 5499910-9 5499922-9 40 B 5102154-9 5499160-9 5499206-9 A 1-5102153-0 1-5499910-0 1-5499922-0 50 B 1-5102154-0 1-5499160-0 1-5499206-0 A— — 1-5499922-1 60 B 1-5102154-1 — 1-5499206-1 A 1-5102153-2 — 1-5499922-2 64 B 1-5102154-2 1-5499160-2 1-5499206-2 A 5102155-1 — 5499923-1 10 B 5102156-1 5499374-1 5102321-1 A— — — 14 B 5102156-2 5499374-2 5102321-2 A 5102155-3 — 5499923-3 16 B 5102156-3 — 5102321-3 A— — 5499923-4 20 B 5102156-4 5499374-4 5102321-4 A— — 5499923-5 24 B 5102156-5 5499374-5 5102321-5 A 5102155-6 — 5499923-6 26 B 5102156-6 5499374-6 5102321-6 .155 3.94 A— — 5499923-7 30 B 5102156-7 — 5102321-7 A 5102155-8 5499911-8 5499923-8 34 B 5102156-8 5499374-8 5102321-8 A 5102155-9 5499911-9 5499923-9 40 B 5102156-9 5499374-9 5102321-9 A 1-5102155-0 — 1-5499923-0 50 B 1-5102156-0 1-5499374-0 1-5102321-0 A— — 1-5499923-1 60 B 1-5102156-1 — 1-5102321-1 A 1-5102155-2 — 1-5499923-2 64 B 1-5102156-2 — 1-5102321-2 Plating Code A — Gold flash over palladium-nickel plate, .000015 [0.00038] min. total on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000015 [0.00038] min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min. nickel underplate. Plating Code B — Gold flash over palladium-nickel plate, .000030 [0.00076] min. total on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000030 [0.00076] min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min. nickel underplate. Note: All part numbers are RoHS compliant. 85 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Mounting Information E 4-24 self-tapping screws .106 F Dia. [2.88] and 2-56 bolts and nuts (For Nut & Bolt are available for mounting .100 hardware) [2.54] straight-thru pin headers .100 .116 of pc boards. Typical appli- [2.54] Dia. [2.95] cations and part nos. for (For Self-Tapping ordering this hardware are Screw hardware) .060 presented below. [1.52] .350 .035 [8.89] Dia. [0.89] Position No. 1 Recommended Mounting Hole Pattern For Vertical PCB Mount Headers PC board thicknesses are : .062 [1.57] for .110 [2.79] long posts, .125 [3.18] for .155 [3.94] long posts. Latch (See Note at left.) 2-56 Bolt & Nut (2 Each Req‘d.) .256 4-24 [6.50] Self-Tapping Screw (2 Req‘d.) Note: 2-56 bolts and nuts may be used to mount pin headers with and without latches. If latches are to be Pin Header Mounting using 4-24 Self-Tapping Screws: Pin Header Mounting with 2-56 Bolts and Nuts: used, the bolts must be positioned in Part No. 19156-1 (for .062 [1.57] Thick PC Board) Part No. 746383-1 (Bolt Only) the pin header before the latches are Part No. 19156-2 (for .093 [2.36] Thick PC Board) Kit No. 102198-1 (Bolt and Nut, 2 Each per Kit) installed. Part No. 19156-3 (for .125 [3.18] Thick PC Board) Note: All part numbers are RoHS compliant. 86 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Military, Center and Dual Polarized, Vertical Mount Universal Ejection Style Pin Headers Military, Center and Dual Polarized Universal Ejection Style Pin Headers with ACTION PIN Contacts Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers with ACTION PIN Contacts, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines .100 Vertical PCB Mount [2.54] .150 .025 [0.64] Sq. Posts [3.81] .165 .190 .253 (Mating End) [4.19] [4.83] [6.43] Pin 2 .336 .315 [8.53] [8.00] .150 .050 [3.81] [1.27] A Pin 1 B C .240 [6.10] .030 Pin Header [0.76] without Latches .025 Material and Finish [0.64] .107 .174 .610 Tail or Housing — Black PBT or nylon, [2.72] [4.42] [15.49] Length .289 UL 94V-0 rated [7.34] Contacts—Copper alloy; duplex plated .025 (See chart, page 88) [0.64] Position No. 1 Indicator Related Product Data Mateable Receptacles — .549 pages 48-55 [13.9] Accessories — Snap-In Polarizer — page 63 Technical Documents .025 Product Specifications [0.64] 108-40019 Pin Headers with ACTION PIN Contacts Dimensions No. of Application Specification Positions AB C D E 114-40020 AMP-LATCH Universal .700 1.100 1.260 1.100 .400 Headers with ACTION PIN Contacts 10 17.78 27.94 32.00 27.94 10.16 .900 1.300 1.460 1.300 .600 14 22.86 33.02 37.08 33.02 15.24 1.000 1.400 1.560 1.400 .700 16 25.40 35.56 39.62 35.56 17.78 1.200 1.600 1.760 1.600 .900 20 30.48 40.64 44.70 40.64 22.86 1.400 1.800 1.960 1.800 1.100 24 35.56 45.72 49.78 45.72 27.94 1.500 1.900 2.060 1.900 1.200 26 38.10 48.26 52.32 48.26 30.48 1.700 2.100 2.260 2.100 1.400 30 43.18 53.34 57.40 53.34 35.56 1.900 2.300 2.460 2.300 1.600 34 48.26 58.42 62.48 58.42 40.64 2.200 2.600 2.760 2.600 1.900 40 55.88 66.04 70.10 66.04 48.26 2.700 3.100 3.260 3.100 2.400 50 68.58 78.74 82.80 78.74 60.96 3.200 3.600 3.760 3.600 2.900 60 81.28 91.44 95.50 91.44 73.66 3.400 3.800 3.960 3.800 3.100 64 86.36 96.52 100.58 96.52 78.74 Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap- in polarizer (military polarization), located as shown. Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown. Notes: 3. For information regarding latch/pin header applications and for ordering latches separately, refer to page 96. 87 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers with ACTION PIN Contacts, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Contact Pin Header Tail No. of Finish (without Length Positions (Plating Code) Latches) 10 1658694-6 14 1658694-7 16 1658694-8 20 1658694-1 24 1658694-9 .174 26 B 1658694-2 [4.42] 30 1-1658694-0 34 1-1658694-1 40 1658694-3 50 1658694-4 64 1658694-5 10 1658695-2 14 1658695-3 16 1658695-4 20 1658695-5 .610 26 B 1658695-6 [15.49] 34 1658695-1 40 1658695-7 50 1658695-8 60 1658695-9 Plating Code B — Gold flash over palladium-nickel plate, .000030 [0.00076] min. total on the mating surfaces, .000100 [0.00254] min. tin plate on the tails, over .000050 [0.00127] min nickel underplate or .000030 [0.00076] min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the tails, over .000050 [0.00127] min. nickel underplate. Mounting Information D 4-24 self-tapping screws E and 2-56 bolts and nuts .106 Dia. .100 are available for mounting [2.69] [2.54] straight-thru pin headers .100 of pc boards. Typical appli- [2.54] cations and part nos. for .060 ordering this hardware are [1.52] presented on page 86. .350 * [8.89] Position No. 1 Recommended Mounting Hole Pattern For Vertical PCB Mount Header With ACTION PIN Contacts *For .080 [2.03] min. thick PCB refer to Application Specification 114-40020 for hole size and finish recommendations. Note: All part numbers are RoHS compliant. 88 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Military, Center and Dual Polarized Universal Ejection Style Pin Headers with ACTION PIN Contacts Military, Center and Dual Polarized, Right-Angle Universal Ejection Style Pin Headers Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines .100 Right-Angle PCB Mount Pin 2 [2.54] .025 [0.64] Sq. Posts .150 .165 [3.81] .253 .190 (Mating End) [4.19] [6.43] [4.83] .336 .315 [8.53] [8.00] .150 .050 [3.81] [1.27] A B C Pin 1 .025 Pos. No. 1 Indicator [0.64] .096 Pin Header [2.44] with Latches .549 [13.94] .108 [2.74] .195 [4.95] D .025 Dia. .038 [0.64] [0.97] .100 .110 .155 [2.54] [2.79] or [3.94] .240 Pin Header Typ. Typ. [6.10] without Latches .100 [2.54] Solder Tail Material and Finish Housing & Latches — Black PBT or .025 nylon, UL 94V-0 rated .107 .289 [0.64] [2.72] [7.34] Contacts — Brass; duplex plated (See chart, page 90) Related Product Data Dimensions No. of Positions AB C D E F Mateable Receptacles — .700 1.100 1.260 .860 .860 .400 pages 48-55 10 17.78 27.94 32.00 21.84 21.84 10.16 Accessories — .900 1.300 1.460 1.060 1.060 .600 14 Snap-In Polarizer — page 63 22.86 33.02 37.08 26.92 26.92 15.24 1.000 1.400 1.560 1.180 1.180 .700 16 25.40 35.56 39.62 29.46 29.46 17.78 Technical Documents 1.200 1.600 1.760 1.380 1.380 .900 20 30.48 40.64 44.70 34.54 34.54 22.86 Product Specifications 1.400 1.800 1.960 1.560 1.560 1.100 108-40018 Pin Headers 24 35.56 45.72 49.78 39.62 39.62 27.94 1.500 1.900 2.060 1.660 1.660 1.200 26 38.10 48.26 52.32 42.16 42.16 30.48 1.700 2.100 2.260 1.860 1.860 1.400 30 43.18 53.34 57.40 47.24 47.24 35.56 1.900 2.300 2.460 2.060 2.060 1.600 34 48.26 58.42 62.48 52.32 52.32 40.64 2.200 2.600 2.760 2.360 2.360 1.900 40 55.88 66.04 70.10 59.94 59.94 48.26 2.700 3.100 3.260 2.860 2.860 2.400 50 68.58 78.74 82.80 72.64 72.64 60.98 3.200 3.600 3.760 3.360 3.360 2.900 60 81.28 91.44 95.50 85.34 85.34 73.66 3.400 3.800 3.960 3.560 3.560 3.100 64 86.36 96.52 100.58 90.42 90.42 78.74 Notes: 1. Pin headers in 10- and 14-position sizes have only one slot for snap-in polarizer (military polarization), located as shown. Notes: 2. Pin headers in 10-position size have only slot for dual polarization, located as shown. 89 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Right-Angle PCB Mount Pin Header w/ Pin Header w/ Contact Pin Header Short Latches Long Latches .025 [0.64] Sq. Posts Soldertail No. of Finish without (Mates with (Mates with Length Positions (Plating Latches Receptacles without Receptacles with (Mating End) (Continued) Code) Strain Relief) Strain Relief) A 5102159-1 5499913-1 5499786-1 10 B 5102160-1 5499345-1 5499141-1 A 5102159-2 5499913-2 5499786-2 14 B— 5499345-2 5499141-2 A 5102159-3 5499913-3 — 16 B 5102160-3 — 5499141-3 A 5102159-4 5499913-4 5499786-4 20 B 5102160-4 — 5499141-4 A— 5499913-5 5499786-5 24 B 5102160-5 5499345-5 — A 5102159-6 5499913-6 5499786-6 26 B 5102160-6 — 5499141-6 .110 2.79 A 5102159-7 5499913-7 — 30 B —— 5499141-7 A 5102159-8 5499913-8 5499786-8 34 B 5102160-8 — 5499141-8 A 5102159-9 5499913-9 5499786-9 40 B 5102160-9 5499345-9 5499141-9 A 1-5102159-0 1-5499913-0 1-5499786-0 50 B 1-5102160-0 1-5499345-0 1-5499141-0 A 1-5102159-1 1-5499913-1 1-5499786-1 60 B 1-5102160-1 — 1-5499141-1 A 1-5102159-2 — 1-5499786-2 64 B 1-5102160-2 — 1-5499141-2 A— — — 10 B 5102162-1 — 5102322-1 A 5102161-2 — 5499925-2 14 B 5102162-2 — 5102322-2 A— — — 16 B— — 5102322-3 A 5102161-4 5499914-4 — 20 B— — 5102322-4 A 5102161-5 — 5499925-5 24 B 5102162-5 — 5102322-5 A— — — 26 B— — 5102322-6 .155 3.94 A 5102161-7 —— 30 B 5102162-7 —— A 5102161-8 5499914-8 — 34 B 5102162-8 — 5102322-8 A— — — 40 B— 5499376-9 — A— — 1-5499925-0 50 B 1-5102162-0 —— A— — — 60 B 1-5102162-1 —— A— — — 64 B 1-5102162-2 —— Plating Code A — Gold flash over palladium-nickel plate, .000015 [0.00038] min. total on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000015 [0.00038] min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min. nickel underplate. Plating Code B — Gold flash over palladium-nickel plate, .000030 [0.00076] min. total on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min nickel underplate or .000030 [0.00076] min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min. nickel underplate. Note: All part numbers are RoHS compliant. 90 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Military, Center and Dual Polarized, Right-Angle Universal Ejection Style Pin Headers Military, Center and Dual Polarized, Right-Angle Universal Ejection Style Pin Headers Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Mounting Information No mounting hardware is supplied by TE. E .106 F Dia. [2.69] .100 .100 [2.54] [2.54] .029 .230 [0.74] .035 Dia. Typ. [5.84] [0.89] Position No.1 Recommended Mounting Hole Pattern For Right-Angle PCB Mount Headers PC board thicknesses are : .062 [1.57] for .110 [2.79] long posts, .125 [3.18] for .155 [3.94] long posts. 91 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Universal Ejection Style Pinless Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines Vertical PCB Mount Pin 2 .025 [0.64] Sq. Posts .100 Dia. (without latches) [2.54] E 2 Holes .100 [2.54] .150 .050 [3.81] [1.27] C Pin 1 Position No.1 Indicator Pinless Header Material and Finish • Housing — Black PBT or nylon, .549 UL 94V-0 rated [13.9] Related Product Data .315 Mateable Receptacles — [8.00] B pages 48-55 A .096 Accessories — Dia. [2.44] Snap-In Polarizer — page 63 2 Holes Technical Documents Product Specifications 108-40018 Pin Headers Dimensions Pinless Header Part Nos. No. of Pos. AB C E Press-Fit Clearance-Fit 1.260 .860 1.100 .400 10 499726-1 102142-6 32.00 21.84 27.94 10.16 1.460 1.060 1.300 .600 14 — 102142-8 37.08 26.92 33.02 15.24 1.560 1.160 1.400 .700 16 — 102142-9 39.62 29.46 35.56 17.78 1.760 1.360 1.600 .900 20 — 102142-1 44.70 34.54 40.64 22.86 1.960 1.560 1.800 1.100 24 — 1-102142-0 49.78 39.62 45.72 27.94 2.060 1.660 1.900 1.200 26 — 102142-2 52.32 42.16 48.26 30.48 2.460 2.060 2.300 1.600 34 499726-8 102142-3 62.48 52.32 58.42 40.64 2.760 2.360 2.600 1.900 40 499726-9 102142-4 70.10 59.94 66.04 48.26 3.260 2.860 3.100 2.400 50 1-499726-0 102142-5 82.80 72.64 78.74 60.96 3.760 3.360 3.600 2.900 60 1-499726-1 102142-7 95.50 85.34 91.44 73.66 3.960 3.560 3.800 3.100 64 1-499726-2 1-102142-3 100.58 90.42 96.52 78.74 Notes: 1. 10- and 14-position pinless headers have only one slot for snap-in polarizer (military polarization). 2. 10-position pinless headers have only one slot for dual polarization. 3. For information regarding latch/pin header applications and for ordering latches separately, refer to page 96. All part numbers are RoHS compliant. Note: All part numbers are RoHS compliant. 92 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Military, Center and Dual Polarized Universal Ejection Style Pinless Headers Military, Center and Dual Polarized Universal Ejection Style Pinless Headers Ribbon Cable Interconnect Solutions Universal Ejection Style Pinless Headers, Military, Center and Dual Polarized, .100 x .100 [2.54 x 2.54] Centerlines (Continued) Installation of Press-Fit Pinless Headers FORCE FORCE Insertion Instructions: 1. Place pinless header over preinstalled posts Steel Block so that post tips start into (Centered over Header) header cavities. 2. With bottom of pc board supported, place steel block over header. Steel block must be wider and Pinless Header longer than header so that it covers all four sides .025 .529 Sq. Posts of the header. However, [0.64] [13.44] Preinstalled in for headers with latches PC Board pre-assembled, the steel block must not interfere with the latches. 3. Apply an even, centered PC Board force on steel block until header bottoms on pc board. If posts are longer than .545 [13.84], they may be forced against the steel block before the header is fully seated. In this situation, extreme Insertion Force: 60 lb. [267 N] max. caution must be taken so Retention Force: 20 lb. [89 N] min. that posts are not dam- aged or pushed out of TE recommends the use of a typical manual frame assembly for insertion of the pc board. pinless headers.The frame assembly and steel block are not supplied by TE. 93 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers with PCT Housing, .100 x .100 [2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End) C .200 .195 [5.08] [4.95] .549 .040 [13.94] [1.02] .110 [2.79] .025 [0.64] Position No.1 Vertical PCB Mount Indicator A B Pin 1 D .250 .289 [6.35] .150 [7.34] .050 [3.81] .240 [1.27] .110 .100 [6.10] [2.79] [2.54] .315 .340 [8.00] [8.64] Right-Angle PCB Mount .100 .100 [2.54] .165 .100 [2.54] [4.19] .129 Ø .025 [2.54] Material and Finish [3.28] [0.64] .150 [3.81] Housing — Red PCT, UL 94V-0 rated Pin 2 .350 Contacts — Brass; Gold flash over pal- E [8.89] ladium-nickel plate, .000030 [0.00076] min. total on the mating surfaces, Vertical .000100 [0.00254] min. tin plate on the soldertails, over .000050 [0.00127] min. nickel underplate or .000030 [0.00076] min. gold on the mating surfaces, .000100 [0.00254] min. tin plate on C the soldertails, over .000050 [0.00127] .040 .200 .195 min. nickel underplate [1.02] [5.08] [4.95] Related Product Data .549 [13.94] .110 Dia. Mateable Receptacles — 2 Plc. [2.79] pages 48-55 .096 [2.44] Accessories — .025 Snap-In Polarizer — page 63 [0.64] Position No.1 Indicator Technical Documents A Product Specifications Pin 1 108-40018 Pin Headers B .250 .289 [6.35] [7.34] D .240 .050 .150 [6.10] .100 [1.27] [3.81] [2.54] .110 .315 .340 [2.79] [8.00] [8.64] .100 [2.54] .100 .151 .165 [2.54] .129 [3.84] Ø .025 [4.19] [3.28] .150 [0.64] .100 [3.81] .350 [2.54] Pin 2 E [8.89] Right-Angle 94 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 .100 x .100 [2.54 x 2.54], .025 [0.64] Sq. Posts (Mating End) Universal Ejection Style Pin Headers with PCT Housing • • .100 x .100 [2.54 x 2.54], .025 [0.64] Sq. Posts (Mating End) Universal Ejection Style Pin Headers with PCT Housing Ribbon Cable Interconnect Solutions Universal Ejection Style Pin Headers with PCT Housing, .100 x .100 [2.54 x 2.54] Centerlines, .025 [0.64] Sq. Posts (Mating End) (Continued) Part Numbers Vertical Right-Angle Dimensions No. of Pin Header Pin Header Pos. AB CD E (without (without Latches) Latches) 1.260 1.100 .860 .700 .400 10 5111008-1 — 32.00 27.94 21.84 17.78 10.16 1.460 1.300 1.060 .900 .600 14 — 5111105-2 37.08 33.02 26.92 22.86 15.24 1.560 1.400 1.160 1.000 .700 16 — 5111105-3 39.62 35.56 29.46 25.40 17.78 1.760 1.600 1.360 1.200 .900 20 — 5111105-4 44.70 40.64 34.54 30.48 22.86 1.960 1.800 1.560 1.400 1.100 24 5111008-5 5111105-5 49.78 40.64 39.62 35.56 27.94 2.060 1.900 1.660 1.500 1.200 26 — 5111105-6 52.32 48.26 42.16 38.10 30.48 2.260 2.100 1.860 1.700 1.400 30 5111008-7 5111105-7 57.40 53.34 47.24 43.18 35.56 2.460 2.300 2.060 1.900 1.600 34 5111008-8 5111105-8 62.48 58.42 52.32 48.26 40.64 2.760 2.600 2.360 2.200 1.900 40 5111008-9 5111105-9 70.10 66.04 59.94 55.88 48.26 3.260 3.100 2.860 2.700 2.400 50 1-5111008-0 1-5111105-0 82.80 78.74 72.64 68.58 60.98 3.760 3.600 3.360 3.200 2.900 60 1-5111008-1 1-5111105-1 95.50 91.44 85.34 81.28 73.66 3.960 3.800 3.560 3.400 3.100 64 1-5111008-2 1-5111105-2 100.58 96.52 90.42 86.36 78.74 .106 Dia. Position No. 1 [2.69] Dia. .100 B Typ. [2.54] .100 .070 .090 C of Holes [2.54] Typ. L [1.78] [2.29] Typ. .060 .110 [1.52] .035 [2.79] [0.89] C of Holes L of Stencil Pattern After Plating Recommended PC Board Mounting Pattern for Vertical Header .106 Dia. Position No. 1 [2.69] Dia. C Typ. .100 .100 .070 .090 [2.54] Typ. [2.54] [1.78] [2.29] C of Holes Typ. L .475 Max.* .035 .110 .029 [12.07] [0.89] [2.79] [.736] After Plating of Stencil Pattern C of Holes L Board Edge Recommended Pc Board Mounting Pattern for Right-Angle Header *Max. distance from edge of PC board for daisy chain applications Note: All part numbers are RoHS compliant. 95 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Latches for Ejection Style Universal Pin Headers and Pinless Headers Latch/Pin Header Applications Latches for use with Novo Receptacles and Female Socket Connectors, 609, 622 & 636 Series 1 1..0 07 95 2 Material [[2 27 7..3 71 2]] Red PCT, UL 94V-0 Rated .265 .576 [6.73] [14.63] Figure 1 — Use Long Latch for AMP-LATCH Novo Receptacles with Strain Relief & Female Socket Connectors with Strain Relief Long Latch Part No. 111338-1 (See Figure 1) .895 .416 [22.73] [10.57] .175 [4.45] Short Latch Part No. 111293-1 (See Figure 2) Figure 2 — Use Short Latch for AMP-LATCH Novo Receptacles without Strain Relief & Female Socket Connectors without Strain Relief Material Material Black thermoplastic, UL 94V-0 Rated Black thermoplastic, UL 94V-0 Rated .576 [14.63] .475 .561 [12.07] [14.25] .185 Ref. [4.70] .691 Ref. [17.55] Long Latch Part No. 102320-1 (See Figure 1) .416 [10.57] ± .008 .140 ± 0.20 [3.56 ] Special Long Latch Part No. 1825851-1 for AMPMODU Mod IV Housing with Center Polarization Key Short Latch Part No. 102312-1 (See Figure 2) Note: All part numbers are RoHS compliant. 96 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Latches for Ejection Style Pin Headers and Pinless Headers Cable Solutions Ribbon Cable Interconnect Solutions Cable Solutions .100 [2.54] Centerline, IDC Ribbon Cable, PVC Insulation Product Specifications Voltage Rating — 300 Volts B UL Recognized — AWM Style 2651 A CSA — Available on request .050 Typ. [1.27] C .010 Edge Mark .100 [0.25] [2.54] Typ. Insulation — Gray Flame Retardant Flexible PVC .007 [0.17] Minimum Insulation Thickness Temperature Rating — –20°C to +105°C Flammability — UL: VW1 Dimensions Dimensions No. of Part No. of Part Conductors Number Conductors Number AB C AB C 24 AWG 7/32 Tinned Copper 24 AWG 7/32 Overcoated Tinned Copper 2 .100 [2.54] .200 [5.08] .044 [1.12] 57746-2 2 .100 [2.54] .200 [5.08] .044 [1.12] 57747-2 5 .400 [10.16] .500 [12.70] .044 [1.12] 57746-5 5 .400 [10.16] .500 [12.70] .044 [1.12] 57747-5 10 .900 [22.86] 1.000 [25.40] .044 [1.12] 1-57746-0 10 .900 [22.86] 1.000 [25.40] .044 [1.12] 1-57747-0 15 1.400 [35.56] 1.500 [38.10] .044 [1.12] 1-57746-5 15 1.400 [35.56] 1.500 [38.10] .044 [1.12] 1-57747-5 20 1.900 [48.26] 2.000 [50.80] .044 [1.12] 2-57746-0 20 1.900 [48.26] 2.000 [50.80] .044 [1.12] 2-57747-0 25 2.400 [60.96] 2.500 [63.50] .044 [1.12] 2-57746-5 25 2.400 [60.96] 2.500 [63.50] .044 [1.12] 2-57747-5 28 2.700 [68.58] 2.800 [71.12] .044 [1.12] 2-57746-8 28 2.700 [68.58] 2.800 [71.12] .044 [1.12] 2-57747-8 26 AWG 7/34 Tinned Copper 22 AWG 7/30 Tinned Copper 2 .100 [2.54] .200 [5.08] .039 [0.99] 57744-2 2 .100 [2.54] .200 [5.08] .051 [1.30] 57748-2 5 .400 [10.16] .500 [12.70] .039 [0.99] 57744-5 5 .400 [10.16] .500 [12.70] .051 [1.30] 57748-5 10 .900 [22.86] 1.000 [25.40] .039 [0.99] 1-57744-0 10 .900 [22.86] 1.000 [25.40] .051 [1.30] 1-57748-0 15 1.400 [35.56] 1.500 [38.10] .039 [0.99] 1-57744-5 15 1.400 [35.56] 1.500 [38.10] .051 [1.30] 1-57748-5 20 1.900 [48.26] 2.000 [50.80] .039 [0.99] 2-57744-0 20 1.900 [48.26] 2.000 [50.80] .051 [1.30] 2-57748-0 25 2.400 [60.96] 2.500 [63.50] .039 [0.99] 2-57744-5 25 2.400 [60.96] 2.500 [63.50] .051 [1.30] 2-57748-5 28 2.700 [68.58] 2.800 [71.12] .039 [0.99] 2-57744-8 28 2.700 [68.58] 2.800 [71.12] .051 [1.30] 2-57748-8 26 AWG 7/34 Overcoated Tinned Copper 2 .100 [2.54] .200 [5.08] .039 [0.99] 57745-2 5 .400 [10.16] .500 [12.70] .039 [0.99] 57745-5 10 .900 [22.86] 1.000 [25.40] .039 [0.99] 1-57745-0 15 1.400 [35.56] 1.500 [38.10] .039 [0.99] 1-57745-5 20 1.900 [48.26] 2.000 [50.80] .039 [0.99] 2-57745-0 25 2.400 [60.96] 2.500 [63.50] .039 [0.99] 2-57745-5 28 2.700 [68.58] 2.800 [71.12] .039 [0.99] 2-57745-8 Other Conductor Counts Available on Request. Contact MADISON CABLE (1-877-MADISON), a Division of TE, for engineer- ing questions or for order placement of this cable. 97 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Ribbon Cable Interconnect Solutions Cable Solutions (Continued) .156 [3.96] Centerline, Flat Ribbon Cable, PVC Insulation Product Specifications Voltage Rating — 300 Volts B UL Recognized — AWM Style 2651 A CSA — Available on request .078 Typ. [1.98] C .010 Edge Mark .156 [0.25] [3.96] Typ. Insulation — Gray Flame Retardant Flexible PVC .007 [0.17] Minimum Insulation Thickness Temperature Rating — –20°C to +105°C Flammability — UL: VW1 Dimensions No. of Part Conductors Number AB C 22 AWG 7/30 Tinned Copper 2 .156 [3.96] .312 [7.92] .051 [1.30] 57750-2 5 .624 [15.85] .780 [19.81] .051 [1.30] 57750-5 10 1.404 [35.66] 1.560 [39.62] .051 [1.30] 1-57750-0 15 2.184 [55.47] 2.340 [59.44] .051 [1.30] 1-57750-5 20 2.964 [75.29] 3.120 [79.25] .051 [1.30] 2-57750-0 24 3.588 [91.14] 3.744 [95.10] .051 [1.30] 2-57750-4 18 AWG 7/26 Tinned Copper 2 .156 [3.96] .312 [7.92] .068 [1.73] 57752-2 5 .624 [15.85] .780 [19.81] .068 [1.73] 57752-5 10 1.404 [35.66] 1.560 [39.62] .068 [1.73] 1-57752-0 15 2.184 [55.47] 2.340 [59.44] .068 [1.73] 1-57752-5 20 2.964 [75.29] 3.120 [79.25] .068 [1.73] 2-57752-0 24 3.588 [91.14] 3.744 [95.10] .068 [1.73] 2-57752-4 Other Conductor Counts Available on Request. Contact MADISON CABLE (1-877-MADISON), a Division of TE, for engineer- ing questions or for order placement of this cable. 98 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 Cable Solutions Ribbon Cable Interconnect Solutions Part Number Index Note: This index lists all cataloged parts Part No. Page Part No. Page Part No. Page by base no. only. Complete part nos. (with 19156 86 188275 36 1761608 80 prefixes and/or suffixes) are shown on the 57034 47 188431 41 1761609 81 page(s) indicated. 57040 47 215079 32, 33, 34 1761685 82 57744 97 215083 38 1761686 82 57745 97 215083 32, 33, 38 1761687 82 57746 97 215460 35 1761688 82 57747 97 215460 32, 33, 35 1761690 83 57748 97 215464 32, 33, 37 1761692 83 57750 98 215570 32, 33, 39 1761693 82 57752 98 338068 41 1761694 82 100411 41 338069 41 1825851 96 102142 92 338070 41 1888188 15 102198 86 338095 32, 33, 40 5088450 66 102312 96 338096 32, 33, 40 5102153 85 102320 96 338097 32, 33, 40 5102154 85 104068 9, 10 338728 41 5102155 85 104069 9, 11 499252 14, 49, 50, 51, 68 5102156 85 104069 11 499712 65 5102159 90 104072 65 499726 92 5102160 90 104652 20 499991 63 5102161 90 104655 21 746383 86 5102162 90 104656 21 746603 47 5102321 85 104693 21 746610 58 5102322 90 104891 27 746611 59 5103308 76 104892 26 1377074 44 5103309 76 104893 26 1437006 56 5103310 77 104894 24 1437011 69 5103311 77 104895 24 1437020 67 5104338 78 111196 9 1437021 67 5104340 79 111293 96 1437022 67 5111008 95 111338 96 1437023 64, 69 5111105 95 111382 58 1437024 69 5111448 46 111446 45 1437025 69 5111595 12 111451 63 1437026 69 5111824 15 111492 45 1437027 69 5499141 90 111494 46 1437028 69 5499160 85 111504 45 1437029 69 5499206 85 111506 46 1499252 68 5499345 90 111547 67 1658525 57 5499374 85 111614 68 1658526 55 5499376 90 111620 64 1658527 53 5499786 90 111623 17 1658528 53 5499910 85 111626 17 1658618 14 5499911 85 120623 63 1658619 14 5499913 90 147121 21 1658620 49 5499914 90 147381 21 1658621 50 5499922 85 147382 21 1658622 50 5499923 85 147383 21 1658623 49 5499925 90 147384 20 1658624 51 5746612 59 147413 20 1658694 88 5746613 59 147503 21 1658695 88 5746615 60 174638 62 1734161 15 6437006 61 174903 62 1734162 15 6489700 15 175629 62 1761606 80 175637 62 1761607 81 99 Catalog 82012 Dimensions are shown for Dimensions are in inches Canada: +1 (905) 475-6222 UK: +44 (0) 800-267666 Revised 4-12 reference purposes only. and millimeters unless Mexico/C. Am.: +52 (0) 55-1106-0800 France: +33 (0) 1-3420-8686 Specifications subject otherwise specified. Latin/S. Am.: +54 (0) 11-4733-2200 Netherlands: +31 (0) 73-6246-999 www.te.com to change. USA: +1 (800) 522-6752 Germany: +49 (0) 6251-133-1999 China: +86 (0) 400-820-6015 TE Connectivity Catalog 82012 Revised 4-12 Ribbon Cable Interconnect Solutions Ribbon Cable Interconnect Solutions te.com © 2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved. 82012 LUG PDF 04/2012 TE Connectivity and the TE connectivity (logo) are trademarks. Other logos, product and/or company names might be trademarks of their respective owners.