TE CONNECTIVITY 1060256-1
Description
Conn SMC RCP 0Hz to 10GHz 50Ohm Solder ST Thru-Hole Gold
1060256-1
Part Number
1060256-1
Price
Request Quote
Manufacturer
TE CONNECTIVITY
Lead Time
Request Quote
Category
Connectors » Connector RF
Specifications
Manufacturer
TE Connectivity
Manufacturers Part #
1060256-1
Lead Time
9 Week Lead Time
Industry Aliases
1060256-1
Sub-Category
RF Connectors
Brand
Raychem Wire and Tubing
Factory Pack Quantity
1
Datasheet
DDEController?Action=srchrtrv&DocNm=1307191_SMC_Connectors&DocType=Catalog+Section&DocLang=English.pdf
279 KiB
Extracted Text
RF Coax Connectors SMC Connectors Product Facts ■ Three-piece designs ■ Fast, clean cable assembly ■ Connector bodies preassembled ■ Solderless termination —no danger of heat damage ■ Center conductor and braid terminated with same tool ■ Low noise level ■ Miniature screw-on coupling ■ PTFE dielectric The SMC Connector is Materials Mechanical Characteristics miniature and light-weight, Mating/Unmating — 10-32 threaded Brass — QQ-B-626 especially designed for coupling Beryllium Copper — QQ-C-530 use in critical applications Cable Attachment — Crimp type, Copper — QQ-C-576 where limited space and both center contact and braid PTFE Insulation — MIL-P-19468 vibration are of major Coupling Nut Retention — concern. 35 lb [156 N] min. Plating Cable Retention — 20 lb [89 N] min., This connector is designed Gold — MIL-G-45204 GR-174 cable in accordance with the Durability — 500 cycles per Electrical Characteristics requirements of Specification MIL-C-39012 MIL-C-39012, Class II, Nominal Impedance — 50 ohms Category B to assure Working Voltage — 335 volts rms Environmental Characteristics the highest standards of Frequency Range — 0 to 10 GHz Temperature Range — electrical and mechanical Insulation Resistance — 1000 –65°C to +85°C performance. It has a con- megohms min. Vibration — MIL-STD-1344, Method stant impedance of 50 ohms, Contact Resistance — 2005, Condition IV a voltage rating of 350 volts Outer Contact — 1 milliohms Salt Spray — MIL-STD-1344, Method and provides excellent Center Contact — 1001, Condition B operation at frequencies Straight Connectors — 6 milliohms Temperature Cycling — Right-Angle Connectors — up to 10 GHz. It also has a MIL-STD-1344, Method 1003, 12 milliohms threaded coupling and can Condition A (except low temperature Dielectric Withstanding Voltage — be used with a wide range is –65°C) 1000 volts rms of miniature coaxial cable RF Leakage — –60 dB min., between sizes including RG 174, 2 and 3 GHz 197, 187, 188 and 316. RF Insertion Loss — Straight Connectors — 0.25 dB max. at 4 GHz Right-Angle Connectors — 0.50 dB max. at 4 GHz Corona Level — 250 volts min. at 70,000 ft [21 336 m] 193 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMC Connectors (Continued) Straight Plugs 26.00 26.00 Ref. Ref. [1.022] [1.022] 16.90 13.80 13.80 Ref. Ref. Ref. [.667] [.545] 9.50 [.545] 9.50 3.90 [.375] [.375] [.155] 3.90 3.90 Cable Cable Ref. Ref. Ref. [.155] [.155] Ref. Plane Ref. Plane Ref. Cable Reference Reference Plane Ref. Plane Plane Plane SMC SMC SMC Plug Plug Plug 5.50 5.50 5.90 5.90 Hex. 5.90 Hex. Hex. 5.50 [.218] [.218] Hex. Hex. [.234] Hex. [.234] [.234] [.218] Part No. 1060220-1 Part No. 1060221-1 Part No. 1060163-1 Crimp Crimp Clamp Cable RG/U Part No. Attachment Cable 178, 178A, 178B Crimp 1060220-1 196, 196A 174, 316 Crimp 1060221-1 188, 188A 174, 316 Clamp 1060163-1 188, 188A Straight Jacks 24.20 6.00 Across Nom. [.953] [.236] Flats 10-32, UNF-2A Clamp Nut Sub-Assembly Cable RG/U Part No. Attachment Cable 174, 316 Clamp 1311638-1 188, 188A Bulkhead Feedthrough Contact 3.18 5.94 [.125] [.234] Cable Jacks 4.37 Ferrule [.172] Plug Assembly Recommended Strip Length Ş 4.88–5.00 Lockwasher Nut [.192–.197] Cable Customer Supplied 2.01–2.08 19.80 Max. [.079–.082] [.780] 6.35 Hex. [.250] Suggested Panel Cutout Assembled View Cable RG/U Part No. Attachment Cable 174, 316 Crimp 51751-1 188, 188A Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 194 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors SMC Connectors (Continued) Ş 0.90 Press-In Panel Jacks, 1.00 [.035] [.039] Straight Terminal 3.50 5.05 [.138] [.199] 5.20 4.50 [.205] [.177] 5.00 2.00 [.197] [.079] 16.50 [.650] Part No. 1460470-1 1.00 Right-Angle Cable Plug Ref. 14.60 [.040] Ref. 6.40 [.575] [.250] SMC Plug 15.10 Ref. [.594] 5.90 Cable Hex. [.234] Ref. Plane Ref. Plane 5.50 Hex. 6.50 [.218] Ref. [.256] Cable RG/U Part No. Attachment Cable 174, 316 Clamp 1060183-1 188, 188A PC Board Jack Receptacles Straight Right-Angle 11.00 5.10 Typ. 1.00 [.432] [.200] .190-32, UNF-2A Dia. [.038] 3.90 Ref. 3.90 [.152] SMC Jack 6.30 [.155] [.250] 1.00 Sq. 0.50 1.80 [.040] Typ. Typ. [.020] [.070] 3.20 3.90 6.40 [.125] Sq. 1.00 Sq. [.155] 6.20 [.250] [.040] 4 Plcs. [.243] 2.50 1.30 Typ. [.100] 14.20 [.050] 7.40 1.00 Ref. Dia. Ref. [.563] 5.10 [.293] [.038] Typ. 11.40 1.80 [.200] Ref. Plane Typ. [.448] [.070] .190-32, UNF-2A Part No. 1060256-1 7.10 SMC Jack [.280] Part No. 1060259-1 + 0.08 Ş 1.30 Ş 1.70 – 0.00 4 Plcs. [.051] + .003 [.067 ] – .000 2.54 5.08 [.100] 2.54 [.200] [.100] 5.08 [.200] Rcommended PC Board Layout Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 195 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 1060256-1?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
Manufacturers







What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods