SPECIFICATION CONTROL DRAWING 10612 2-13-18 77 OHM, AWG 24, 19 STRANDS OF AWG 36, OPTIMIZED SHIELD, Date: DATA BUS CABLE, MIL-STD-1553 CHEMINAX K Revision: THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS DIMENSIONS ARE NOMINAL VALUES IN INCHES, UNLESS OTHERWISE CHARACTERISTIC IMPEDANCE 77 ± 5 ohms, Method C at 1 MHz DESIGNATED. MUTUAL CAPACITANCE 30.0 pF/ft. (98.4 pF/m) (maximum) ATTENUATION 1.4 dB/100 ft. (4.59 dB/100 m) (maximum) at 1 MHz SURFACE TRANSFER IMPEDANCE 100 milliohms/meter (maximum) CONDUCTORS (Per SAE AS85485) at 30 MHz AWG 24, 19 Strands of AWG 36, .0250 ADDITIONAL REQUIREMENTS Silver-Coated High- (.635 mm) Strength Copper Alloy COMPONENT WIRE PRIOR TO CABLING (Test procedures per SAE AS22759) DIELECTRICS CONDUCTOR RESISTANCE 26.5 ohms/1000 ft. (86.9 ohms/km) (nominal) .048 ± .002 Radiation-Crosslinked, (1.22 ± .05 mm) Modified ETFE CROSSLINKING PROOF TEST 300 ± 3°C for 1 hour, Colors - Light Blue/White .500 inch (12.7 mm) mandrel, .032 .375 lb (170 g), 2.5 kV dielectric test FILLERS (.813 mm) INSULATION (DIELECTRIC) Radiation-Crosslinked, ELONGATION 50% (minimum) Modified ETFE 2 2 TENSILE STRENGTH 5000 lbf/in (34.5 N/mm ) (minimum) INSULATION FLAWS SPARK TEST 3.0 kV (rms) IMPULSE TEST 8.0 kV (peak) INSULATION RESISTANCE 5000 megohms for 1000 ft. (1524 megohms-km) (minimum) SHIELD LOW TEMPERATURE-COLD BEND -65 ± 3°C for 4 hours, .113 AWG 38, .750 inch (19.1 mm) mandrel, (2.87 mm) Tin-Coated Copper, 1.00 lb (454 g), 2.5 kV dielectric test Optimized SHRINKAGE 200 ± 3°C for 1 hour, .125 inch (3.18 mm) (maximum) in 12 inches (305 mm) FINISHED CABLE (Test procedures per NEMA WC 27500, unless otherwise specified) BLOCKING 200°C for 6 hours CABLE LAY LENGTH .75 inch (19.1 mm) (minimum), 1.25 inches (31.8 mm) (maximum) .129 (3.28 mm) JACKET CROSSLINKED VERIFICATION 300 ± 5°C for 6 hours, (nominal) Radiation-Crosslinked, 6.00 inch (152 mm) mandrel .137 (3.48 mm) Modified ETFE FLAMMABILITY 3 seconds (maximum); (maximum) (Method B of Spec 1200) 3 inches (76.2 mm) (maximum); no flaming of facial tissue JACKET ELONGATION 50% (minimum) 2 2 TENSILE STRENGTH 5000 lbf/in (34.5 N/mm ) (minimum) JACKET FLAWS SPARK TEST 1.0 kV (rms) IMPULSE TEST 6.0 kV (peak) JACKET THICKNESS .008 inch (.203 mm) (nominal) LOW TEMPERATURE-COLD BEND -55 ± 5°C for 4 hours, 6.00 inch (152 mm) mandrel VOLTAGE WITHSTAND 1000 volts (rms) (minimum) (DIELECTRIC) WEIGHT 15.9 lbs/1000 ft. (23.7 kg/km) (maximum) The conductor AWG size and outer jacket color will be appended to the part number. Unless otherwise specified, outer jacket color will CABLE IDENTIFICATION: Outer jacket shall be marked in contrasting color at 12 be white designated by a "-9" in accordance with MIL-STD-681, inch (305 mm) (nominal) intervals between marks as follows: "10612 RAYCHEM" (e.g. 10612-24-9). ENGINEERING REFERENCE Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the TEMPERATURE RATING 150°C (maximum) purchase order. Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Cheminax, Raychem, TE Connectivity, and TE connectivity (logo) are trademarks. Raychem Wire & Cable THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. 501 Oakside Avenue REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. Redwood City, California 94063-3800 © 2009-2018 TE Connectivity Ltd. family of companies. All Rights Reserved. Phone: 1-800-522-6752 Fax: 1-650-361-6297