TE CONNECTIVITY 10VV1
Specifications
Manufacturer
TE Connectivity
Manufacturers Part #
10VV1
Industry Aliases
6609043-3, 10VV1
Sub-Category
Power Line Filters
Brand
Corcom
Factory Pack Quantity
12
Datasheet

DDEController?Action=showdoc&DocId=Catalog+Section%7F1654001_CORCOM_PRODUCT_GUIDE_V_W_SERIES%7F0611%7Fpdf%7FEnglish%7FENG_CS_1654001_CORCOM_PRODUCT_GUIDE_V_W_SERIES_0611.pdf
202 KiB
Extracted Text
Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Multipurpose Power Line RFI Filter for Emission Control V and W Series UL Recognized CSA Certified VV1 / VW1 VDE ApprovedE VV6 / VW6 Both the V and W series are effective to control Specifications 2 emissions in equipment using SCR and T L circuits Maximum leakage current each Line to Ground: for compliance with FCC Part 15, Subpart J and @ 120 VAC 60 Hz: .5 mA EN55022, Level A, down to 150kHz @250 VAC 50 Hz: .82 mA Hipot rating (one minute): Line to Ground: 2250 VDC V Series Line to Line: 1450 VDC • Offers an N = 3 (“T”) Line to Ground impedance to Rated Voltage (max): 250 VAC common mode and an N = 5 “Dbl. Pi”) impedance for Line to Line differential mode interference Operating Frequency: 50/60 Hz • Designed for susceptibility use when equipment Rated Current: 3 to 20A* impedance at RF frequencies is low Operating Ambient Temperature Range (at rated current I ): -10°C to +40°C W Series r In an ambient temperature (T ) higher than +40°C a • Offers an N = 4 (“Dbl. L”) Line to Ground the maximum operating current (I ) is calculated as o impedance for common mode and an N=5 (“Dbl. follows: I = I (85-Ta)/45 o r Pi”) impedance for Line to Line differential mode interference Electrical Schematics • Designed for use when equipment impedance at V Series RF frequencies is high LINE LOAD • Two stage construction provides excellent suppression at high frequencies Ordering Information 20 V V 6 W Series (3, 6 & 10A) LINE LOAD Input / Output Style 1 – .250 [6.3] spade terminals 6 – Threaded bolt 7 – IEC inlet* (line side) .250 [6.3] spade terminals W Series (20A) (load side) LINE LOAD V or W Series Leakage current designation V – Standard Current Rating B20VW7, 20A model tested by Underwriters Laboratories 3, 6, 10 or 20A to US and Canadian requirements and is VDE approved at 16A, 250VAC *IEC 60320-1 C20 inlet mates with C19 connector 86 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change. RFI Power Line Filters Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Multipurpose Power Line RFI Filter for Emission Control (continued) Case Styles (continued) V and W Series VW7 Threaded inserts Available Part Numbers 3VV1 3VW1 2.25 6VV1 3VW1 B 57.15 10VV1 10VW1 20VV1 20VW1 1 20VV6 20VW6 .047 ± .010 1.19 ± .25 20VW7* 5.33 ± .025 135.38 ± .635 A C Case Styles V1 / W1 (3, 6 & 10A) Recommended Panel Cutout B .157 Dia. 2.30 3.98 58.42 D E 1.22 1.60 C L 30.99 40.46 C A .75 19.05 .219 Mounting Plane R 5.56 2.12 53.85 V1 / W1 (20A) Case Dimensions A B CD E Part No. E D B 3VV1, 3VW1 6VV1, 6VW1 2.00 50.8 10VV1, 10VW1 A C 20VV1, 20VW1 V6 / W6 20VV6, 20VW6 20VW7 E D B 2.00 50.8 A C *20VW7, 20A model tested by Underwriters Laboratories to US and Canadian requirements and is VDE approved at 16A, 250VAC 87 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change. Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Multipurpose Power Line RFI Filter for Emission Control (continued) V and W Series Performance Data Typical Insertion Loss Measured in closed 50 Ohm system Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) 3VV 6VV 10VV 20VV db db db db 100 100 100 100 90 90 90 90 80 80 80 80 70 70 70 70 60 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 10 10 0 0 0 0 0.1 1 10 30 0.1 1 10 30 0.1 1 10 30 0.1 1 10 30 Frequency in MHz Frequency in MHz Frequency in MHz Frequency in MHz 3VW 6VW 10VW 20VW db db db db 100 100 100 100 90 90 90 90 80 80 80 80 70 70 70 70 60 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 10 10 0 0 0 0 0.1 1 10 30 0.1 1 10 30 0.1 1 10 30 0.1 1 10 30 Frequency in MHz Frequency in MHz Frequency in MHz Frequency in MHz Minimum Insertion Loss Measured in closed 50 Ohm system Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) 88 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change.
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the 10VV1?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods