Commoning Block One- and Two-Line Commoning Block One- and two-line commoning blocks are designed to provide multiple pair outputs for each input pair. Advantages • Easy to Install: Toolless insulation displacement contacts using pivot connectors terminate by hand. No wire stripping necessary. • Minimizes space requirements: Low profile design fits into applications where space is limited. • Versatile: Designed for signal and low-power applications. Can be re-used thousands of times. Accommodates 22 - 26 AWG solid copper wires. • High-performance: Category 5 compliant transmission. • UL Listed • Available pre-installed in boxes Applications • Home telephone wiring • Wire pair terminations • Demarcation points • Star wiring • VOIP Product Overview One-Line Commoning Block One line in, 11 lines out Part number 1116338-1 1116338-2 with grease filled pivots 2-1116338-2 in housing, grease filled pivot Two-Line Commoning Block Two lines in, 5 lines out, each row Part number 1116339-1 1116339-2 with grease filled pivots 2-1116339-2 in housing, grease filled pivot Installation Summary Instructions: PML D33049 Commoning Block Assemblies 111638 (1 line all pairs common) 111639 (2 lines each row pairs common) Use unstripped solid copper wire pair sizes 24 through 22 AWG with maximum insulation diameter of 1.52mm (.060 inches). 1. Mount commoning block to flat, dry, non-metallic surface. 2. Lift end of stuffer. 3. Insert tip wire into hole “T” and ring wire into hole “R” until each bottoms out. 4. Hold wires in place and push down on stuffer. Wire removal: Lift end of stuffer until it stops. Pull straight back on wire. Trim 6.4mm (.75 inches) off wire before reterminating. Tyco Electronics Corporation 8000 Purfoy Road TE (logo) and Tyco Electronics are trademarks. Other trademarks used are the property of their respective owners. Fuquay Varina, NC 27526-9349 Tel: 919-557-8900 While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this document, Tyco Electronics Fax: 919-557-8498 does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the www.tycoelectronics.com information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information www.us.telecomosp.com contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimen- sions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change © 2010 Tyco Electronics Corporation. All rights reserved. without notice. Consult Tyco Electronics for the latest dimensions and design specifications. F421.07/10