Catalog 1308242 Revised 3-03 Relays, Contactors, Timers, Transformers and Circuit Breakers For General Purpose Applications Relays, Contactors, Timers, AGASTAT TYCO ELECTRONICS CORPORATION WWW.TYCOELECTRONICS.COM Transformers and Circuit Breakers AXICOM For General Purpose Applications Catalog 1308242 Revised 3-03 KILOVAC OEG P&B PRODUCTS UNLIMITED SCHRACK This page intentionally left blank. Relays, Contactors, Timers, Transformers and Circuit Breakers for General Purpose Industrial & Commercial Applications This technical databook includes specification information for a broad selection of components. Electrome- chanical relays, contactors, timers, solid state relays, input/output modules, sensors, protective relays, magnetic circuit breakers, thermal circuit breakers and transformers are all described in the databook. Locating a product in this databook Immediately following this introductory page is an alphanumeric index of the product series in this databook. This is helpful if you already know the series designator of the product for which you are seeking specifications. The index is followed by a selector guide that provides a brief overview of the various series in our extensive product line. This is intended to help you quickly determine which product series may be best suited for a given application. The selector guide also lists the page number in the databook where much more detailed specifications for each series may be found. Need more help selecting a product series? The body of this databook is divided into 14 major product categories. Each section begins with an alphanumeric index of the product series contained therein. Additionally, a "question tree" is included on the first or second page of several sections to help in narrowing your search to product series that may be appropropriate for a given application. While by no means definitive, these tools can prove to be an effective starting point. Finding out more details If you need additional specification information , please contact Tyco Electronics Technical Support (see inside back cover for Technical Support contact information.) Information about our products also can be found on our website at http://relays.tycoelectronics.com. Our website is updated more frequently than the printed technical databook, so you may find information there which is more current than our databook. Note regarding product availability This databook lists a broad range of products which are available with varying leadtimes. Some are normally maintained in stock for immediate delivery. Many other products are available within what would be considered “normal” leadtimes for our industry. However, there may be extended leadtimes for some non- stock items. Additionally, there are minimum quantity requirements. You should consult with your Tyco Electronics authorized distributor or sales engineer regarding availability and minimum order requirements before specifying a particular non-stock model. Changes in specifications/availability We constantly endeavor to enhance the quality of our products and update our product offering; therefore, specifications and product availability are subject to change without notice. Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this databook, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties (and all express warranties, except as otherwise stated in this databook) regarding the information contained herein, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. It is recommended that you test any new or replacement product before incorporating into a system. The dimensions in this databook are for reference purposes only and are subject to change without notice. Dimensions are in inches over (millimeters), unless otherwise specified. Specifications are subject to change without notice. Consult Tyco Electronics at 1-800-522-6752 for latest dimensions and design specifications, or use the global contact list shown on inside back cover. AGASTAT, AMP, AXICOM, CII, HARTMAN, KILOVAC, OEG, P&B, POTTER & BRUMFIELD, PRODUCTS UNLIMITED, SCHRACK and TYCO are trademarks. Other products, logos and company names mentioned herein © 2003 by Tyco Electronics Corporation. may be trademarks of their respective owners. All rights reserved. i Catalog 1308242 Issued 3-03 PRODUCT INDEX Alphanumeric Index Series Type Page Series Type Page Model 2000 ................. Definite Purpose Contactor ...................................................... 828 0409 (Hi-Inrush) .......... 10A, One-pole PC Board Relay ................................................. 488 0410 .............................. 16A, One-pole PC Board Relay ................................................. 491 Model 93-3100 ............ Definite Purpose Contactor ...................................................... 834 Model 96-3100 ............ Definite Purpose Contactor ...................................................... 830 0419 .............................. Relay w/Dust Cover .................................................................... 745 0429 (Hi-Inrush) .......... 10A, One-pole PC Board Relay ................................................. 457 Model 96-3186 ............ Definite Purpose Contactor ...................................................... 838 0430 .............................. 10-16A, One- or Two-pole PC Board Relay ............................ 495 Model 98-3100 ............ Definite Purpose Contactor ...................................................... 832 136 ................................ Traffic Light (Flash Transfer) Relay ......................................... 916 Model A-3100 ............. Definite Purpose Contactor ...................................................... 840 MT ................................ Relay w/Dust Cover .................................................................... 742 159/160 ......................... Mercury-Wetted Reed Relays .................................................. 308 190 ................................ DPDT, THT Low-signal PC Board Relay .................................. 331 MT2 .............................. DPDT, THT Low-signal PC Board Relay .................................. 335 MT4 .............................. 4PDT, THT Low-signal PC Board Relay ................................... 337 2100 .............................. Miniature Electropneumatic Timer ........................................ 1254 2IO ................................ Mtg. Board for Standard I/O Modules .................................. 1114 OAC .............................. Standard AC Output Module ................................................... 1110 OACM .......................... Slim Line AC Output Module ................................................... 1118 2IOM ............................ Mtg. Board for Slim Line I/O Modules .................................. 1122 38 .................................. Power Relay ................................................................................ 818 ODC .............................. Standard DC Output Module ................................................... 1110 ODCM .......................... Slim Line DC Output Module ................................................... 1118 3RP15 ........................... Programmable Time Delay Relay ........................................... 1207 4000 .............................. 5-30VA Transformer, Wire Leads, Class II ............................. 204 OJ/OJE ........................ 3-10A, One-pole PC Board Relay ............................................. 422 OL ................................. SPST-NO & DPST-NO, Dry Reed Relay .................................. 304 4000 .............................. 10-30VA Transformer, QC Terminals, Class II ........................ 205 4000 .............................. 20-40VA Transformer, Plate Mount, Class II .......................... 206 OMI/OMIH .................. 16A, One-pole PC Board Relay ................................................. 458 OMI 2 ........................... 5A, Two-pole PC Board Relay .................................................. 460 4000 .............................. 40-50VA Transformer, Wire Leads, Class II ........................... 207 4000 .............................. 40-50VA Transformer, QC Terminals, Class II ........................ 208 OMIF ............................ 20A, One-pole PC Board Relay ................................................. 466 OMIT ............................ 10A, One-pole PC Board Relay ................................................. 464 4000 .............................. 60-75VA Transformer, Wire Leads, Class II ........................... 209 4000 .............................. 60-75VA Transformer, QC Terminals, Class II ........................ 210 OMR ............................. SPST-NO & DPST-NO, Dry Reed Relay .................................. 306 ORWH .......................... 10A, One-pole PC Board Relay ................................................. 438 4700 .............................. 60-150VA Transformer, Wire Leads, UL 508 ........................... 211 48K ............................... Programmable Time Delay Relay ........................................... 1210 OSA .............................. 3-5A, Two-pole PC Board Relay ............................................... 470 OSZ .............................. 16A, One-pole PC Board Relay ................................................. 472 491 ................................ 20A AC Coil PCB or Panel Mt. Relay ......................................... 509 57 .................................. Transformer Relay for HVAC .................................................... 212 OUAZ ........................... SPDT, THT Low-signal PC Board Relay .................................. 319 OUDH ........................... 10A, One-pole PC Board Relay ................................................. 432 600 ................................ 3-15A, One-pole PC Board Relay ............................................. 497 7000 .............................. Electropneumatic Timer .......................................................... 1248 OZ/OZF ......................... 16A, One-pole PC Board Relay ................................................. 462 P1 (V23026) ................. SPDT, SMT or THT Low-signal PC Board Relay .................... 314 9100 .............................. Power Relay ................................................................................ 816 9400 .............................. Power Relay ................................................................................ 814 P2 (V23079) ................. DPDT, SMT or THT Low-signal PC Board Relay .................... 325 P25 ............................... Definite Purpose Contactor ...................................................... 820 AGASTAT Timer Accessories ........................................................................................ 1206 AGASTAT Timer Terms and Definitions ....................................................................... 1204 P30/P40 ........................ Definite Purpose Contactor ...................................................... 823 P31/P41 ........................ Definite Purpose Contactor ...................................................... 826 AGASTAT Timer Timing Modes ..................................................................................... 1205 Agency Approval Information ............................................................................................. iv PB ................................. 10A, One-pole PC Board Relay ................................................. 426 PCD/PCDF ................... 15A, One-pole PC Board Relay ................................................. 424 Card E (V23057) .......... 8A, One-pole PC Board Relay ................................................... 480 CB ................................. Discrete Function Time Delay Relay ..................................... 1228 PCE ............................... 10A, One-pole PC Board Relay ................................................. 436 PCF ............................... 25A DC Coil PCB Relay ................................................................ 502 CD ................................. Discrete Function Time Delay Relay ..................................... 1222 CG ................................. Discrete Function Time Delay Relay ..................................... 1220 PCG .............................. 5A, Two-pole PC Board Relay .................................................. 493 PCH .............................. 5-10A, One-pole PC Board Relay ............................................. 418 CH ................................. Discrete Function Time Delay Relay ..................................... 1226 CK ................................. Discrete Function Time Delay Relay ..................................... 1224 PCI ................................ 3A, Two-pole PC Board Relay .................................................. 468 PCJ ............................... 5A, One-pole PC Board Relay ................................................... 416 CL ................................. Discrete Function Time Delay Relay ..................................... 1231 CN1 .............................. Discrete Function Time Delay Relay ..................................... 1219 PCK .............................. 16A, One-pole PC Board Relay ................................................. 478 PCKWK ........................ Magnetic Latching Relay .......................................................... 904 CNM5 ........................... Programmable Time Delay Relay ........................................... 1215 CNS .............................. Programmable Time Delay Relay ........................................... 1213 PCL/PCLH .................... Relay w/Dust Cover .................................................................... 713 PCN .............................. 3A, One-pole PC Board Relay ................................................... 407 CNT .............................. Programmable Time Delay Relay ........................................... 1211 Contact Forms & Material .................................................................................................... iv PE ................................. 5A, One-pole PC Board Relay ................................................... 403 PE - Latching .............. Magnetic Latching Relay .......................................................... 902 CR ................................. Discrete Function Time Delay Relay ..................................... 1230 CS ................................. Voltage Sensor .......................................................................... 1302 PM ................................ Power Relay ................................................................................ 809 PMA/PMB ................... Three Phase Power Quality Monitor ..................................... 1305 CU ................................. Discrete Function Time Delay Relay ..................................... 1231 D2N (V23105 ) ............. DPDT, THT Low-signal PC Board Relay .................................. 333 PRD .............................. Power Relay ................................................................................ 811 PT ................................. Relay w/Dust Cover .................................................................... 717 FP2 ............................... DPDT, THT Low-signal PC Board Relay .................................. 323 FT2/FU2 ........................ DPDT, SMT or THT Low-signal PC Board Relay .................... 327 P&B Time Delay Relay Terms & Definitions ................................................................ 1202 P&B Time Delay Relay External Resistor Guide .......................................................... 1203 FX2 ............................... DPDT, THT Low-signal PC Board Relay .................................. 329 GP ................................. Control Relay ............................................................................... 917 R10-R ........................... Immersion-Cleanable Relay ...................................................... 703 R10 ............................... Relay w/Dust Cover .................................................................... 703 High Performance Relay Product Overview ................................................................ 1401 IAC ............................... Standard AC Input Modules ................................................... 1110 RE ................................. 6A, One-pole PC Board Relay ................................................... 405 RM2/3/5/6/7 ................. Relay w/Dust Cover .................................................................... 733 IACM ............................ Slim Line AC Input Modules .................................................... 1118 IDC ............................... Standard DC Input Modules ................................................... 1110 RM C/D ........................ Power Relay ................................................................................ 805 RP II/1 .......................... 8-16A, One-pole PC Board Relay ............................................. 484 IDCM ............................ Slim Line DC Input Modules .................................................... 1118 IF (V23077) ................... 16A, One-pole PC Board Relay ................................................. 489 RP II/2 .......................... 8A, Two-pole PC Board Relay .................................................. 482 RP3SL (Hi-Inrush) ...... 16A, One-pole PC Board Relay ................................................. 486 IM ................................. DPDT, SMT or THT Low-signal PC Board Relay .................... 321 JWD/JWS ................... SPST-NO – DPDT, Dry Reed Relay .......................................... 303 RT - AC Coil ................ 8-16A, One- or two-pole PC Board Relay ............................... 448 RT - DC Coil ................ 8-16A, One- or two-pole PC Board Relay ............................... 446 K10 ............................... Relay w/Dust Cover .................................................................... 720 KA ................................. Open Relay ................................................................................... 737 RT - Sensitive ............ 10A, One-pole PC Board Relay ................................................. 451 RT - Hi-Inrush ............ 16A, One-pole PC Board Relay ................................................. 455 KBP .............................. Mechanical Latching Relay ...................................................... 910 KH/KHA ....................... Relay w/Dust Cover .................................................................... 709 RT - Hi-Temp ............. 10-16A, One-pole PC Board Relay ........................................... 453 RT - Latching .............. Magnetic Latching Relay .......................................................... 906 KHS .............................. Hermetically Sealed Relay ........................................................ 709 KRP–3–H ..................... Relay w/Dust Cover .................................................................... 739 RY II .............................. 8A, One-pole PC Board Relay ................................................... 412 S86R/S87R ................... Power Relay ................................................................................ 807 KR–E ............................ Hermetically Sealed Relay ........................................................ 737 KRP/KRPA ................... Relay w/Dust Cover .................................................................... 737 S89R/S90R ................... Impulse Relay .............................................................................. 912 SCB .............................. Discrete Function Time Delay Relay ..................................... 1235 KU/KUP ........................ Open Relay or Relay w/Dust Cover .......................................... 723 KUE/KUEP ................... Open Relay or Relay w/Dust Cover .......................................... 723 SCE ............................... Discrete Function Time Delay Relay ..................................... 1239 SCF ............................... Programmable Time Delay Relay ........................................... 1218 KUGP ........................... Relay w/Dust Cover .................................................................... 723 KUHP ........................... Power Relay ................................................................................ 803 SDAS-01 ...................... Current Monitor ........................................................................ 1307 SDT .............................. 10A, One-pole PC Board Relay ................................................. 474 KUIP ............................. Relay w/Dust Cover .................................................................... 723 KUL ............................... Magnetic Latching Relay .......................................................... 908 SDT-R .......................... 5-10A, One-pole PC Board Relay ............................................. 476 Selector Guide ........................................................................................................................ v KUM/KUMP ................ Open Relay or Relay w/Dust Cover .......................................... 723 KUP93 .......................... Relay w/Dust Cover .................................................................... 731 SNR (V23092) .............. 6A, One-pole PC Board Relay ................................................... 409 Socket Usage Guide .......................................................................................................... 749 MD0 ............................. Discrete Function Time Delay Relay ..................................... 1233 MDR ............................. Rotary Relay (High Shock Resistance) ................................... 914 SR2 (V23047) ............... 2 Pole Relay w/ Forcibly Guided Contacts .............................. 603 SR4 D/M ...................... 4 Pole Relay w/ Forcibly Guided Contacts .............................. 606 Micro K (V23086) ........ Single or Dual 20A Automotive Relay .................................... 1002 ML ................................ Magnetic Latching Control Relay ............................................ 917 SR6 (V23050) ............... 6 Pole Relay w/ Forcibly Guided Contacts .............................. 609 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: ii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCT INDEX Series Type Page SR6D/M ....................... 4 Pole Relay w/ Forcibly Guided Contacts .............................. 607 SR6S ............................ Sensitive 6 Pole Relay w/ Forcibly Guided Contacts ............ 611 Circuit Breakers .........................101-124 SR6Z ............................. 6 Pole Relay w/ Forcibly Guided ContactsModule ................ 613 1 SRC .............................. Discrete Function Time Delay Relay ..................................... 1237 SRUDH ......................... 12A, One-pole PC Board Relay ................................................. 442 SRUUH ......................... 15A, One-pole PC Board Relay ................................................. 444 SSC .............................. Discrete Function Time Delay Relay ..................................... 1234 SSF ............................... Programmable Time Delay Relay ........................................... 1217 Transformers ..............................201-212 2 SSR .............................. Solid State Relay, Paired SCR Output ................................... 1104 SSRD ............................ Dual Solid State Relay ............................................................. 1106 SSRQ ............................ Quad Solid State Relay ............................................................ 1108 SSRT ............................ Solid State Relay, Triac Output .............................................. 1102 SST ............................... Discrete Function Time Delay Relay ..................................... 1238 STA .............................. Discrete Function Time Delay Relay ..................................... 1236 Low-signal PC Board Relays ....301-338 3 T7C ............................... 5-12A, One-pole PC Board Relay ............................................. 440 T7N ............................... 10A, One-pole PC Board Relay ................................................. 434 T72M ............................ Single 20A Automotive Relay .................................................. 1005 T73 ................................ 10A, One-pole PC Board Relay ................................................. 430 T75 ................................ 8-14A, One-pole PC Board Relay ............................................. 414 Mid-Range PC Board Relays ...401-498 T77 ................................ 3-10A, One-pole PC Board Relay ............................................. 420 4 T81 ................................ SPDT, THT Low-signal PC Board Relay .................................. 318 T9A ............................... 30A DC Coil PCB or Panel Mt. Relay ......................................... 506 T90 ................................ 30A DC Coil PCB Relay ................................................................ 504 T92 ................................ 30A AC or DC Coil PCB or Panel Mt. Relay .............................. 511 TR ................................. Timing Control Relay .................................................................. 917 Power PC Board Relays ............501-512 5 Track Mount System .......................................................................................................... 747 TSC ............................... SPDT, THT Low-signal PC Board Relay .................................. 316 U/UB (V23148 ) ........... 7A, One-pole PC Board Relay ................................................... 428 V23026 (P1) ................. SPDT, SMT or THT Low-signal PC Board Relay .................... 314 V23047 (SR2) ............... 2 Pole Relay w/ Forcibly Guided Contacts .............................. 603 Relays with V23050 (SR6) ............... 6 Pole Relay w/ Forcibly Guided Contacts .............................. 609 6 Forcibly-Guided Contacts .........601-614 V23057 (Card E) .......... 8A, One-pole PC Board Relay ................................................... 480 V23077 (IF) ................... 16A, One-pole PC Board Relay ................................................. 489 V23079 (P2) ................. DPDT, SMT or THT Low-signal PC Board Relay .................... 325 V23086 (Micro K) ........ Single or Dual 20A Automotive Relay .................................... 1002 Plug-in/Panel Mount V23092 (SNR) .............. 6A, One-pole PC Board Relay ................................................... 409 V23105 (D2N) .............. DPDT, THT Low-signal PC Board Relay .................................. 333 7 General Purpose Relays ...........701-752 V23148 (U/UB) ............ 7A, One-pole PC Board Relay ................................................... 428 V2R ............................... 20A Automotive Motor Reversing Module ........................... 1012 VCA .............................. Single Phase Undervoltage Relay ......................................... 1303 VF4 ............................... 40A Automotive Relay .............................................................. 1017 Power Relays & Definite VF7 ............................... 70A Automotive Relay .............................................................. 1021 8 VFM .............................. 20A Automotive Relay .............................................................. 1014 Purpose Contactors...................801-942 VKP .............................. 40A Automotive Relay .............................................................. 1007 VMA ............................. Single Phase Undervoltage Relay ......................................... 1304 VTF ............................... Automotive Flasher Module .................................................... 1024 VTM-1 .......................... Discrete Function Timing Module .......................................... 1240 Latching, Impulse, Rotary & VTM1 ........................... Discrete Function Timing Module .......................................... 1241 9 Special Application Relays ......901-920 VTM2 ........................... Discrete Function Timing Module .......................................... 1244 VTM3 ........................... Discrete Function Timing Module .......................................... 1245 VTM4 ........................... Discrete Function Timing Module .......................................... 1246 VTM7 ........................... Discrete Function Timing Module .......................................... 1247 VTMA1 ......................... Discrete Function Timing Module .......................................... 1242 Automotive Relays .................1001-1026 VTMR1 ......................... Discrete Function Timing Module .......................................... 1243 10 W6 ................................ Magnetic Circuit Breaker .......................................................... 119 W9 ................................ Magnetic Circuit Breaker .......................................................... 119 W23 .............................. Thermal Circuit Breaker ............................................................ 116 W28 .............................. Thermal Circuit Breaker ............................................................ 110 Solid State Relays & W31 .............................. Thermal Circuit Breaker ............................................................ 116 11 Input/Output Modules ...........1101-1126 W33 .............................. Thermal Circuit Breaker ............................................................ 114 W51 .............................. Thermal Circuit Breaker ............................................................ 112 W54 .............................. Thermal Circuit Breaker ............................................................ 105 W57 .............................. Thermal Circuit Breaker ............................................................ 103 Time Delay Relays & W58 .............................. Thermal Circuit Breaker ............................................................ 107 WD25 ........................... Paralleling (Synch Check) Relay ............................................ 1308 12 Modules...................................1201-1256 WD2759 ....................... Over/Undervoltage Relay ........................................................ 1308 WD32 ........................... Reverse Power Relay ............................................................... 1308 WD47 ........................... Phase Sequence Relay ............................................................ 1308 WD5051 ....................... 1 or 3-Phase Overcurrent Relay ............................................. 1308 Sensors, Monitors & WD81OU ...................... Over/Underfrequency Relay ................................................... 1308 13 Protective Relays ...................1301-1322 Mature and Low Volume Products Some product series are not described in the databook, as they may not represent High Performance Relays & the most effective solution for many new design requirements. However, many of the non-cataloged products are still available for sale. Contact a Tyco Electronics 14 Contactors (overview) ...........1401-1412 Technical Specialist (see inside back cover) for more details about AGASTAT, AXICOM, CII, HARTMAN, KILOVAC, OEG, P&B, PRODUCTS UNLIMITED, SCHRACK or TYCO relay or circuit breaker products that you cannot find in this databook. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: iii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 REFERENCE INFORMATION Contact Designators and Materials / Agency Approvals Contact Forms Design Sequence Symbol Form Design Sequence Symbol Form SPST-NO Make (1) A SPDT-NO Center OFF K 1 SPST-NO Double Make (1) X SPST-NC Break (1) B 1 (DM) 1 SPDT Break(1) - Make (2) C SPST Double Break (1) Y 2 1 (DB) 1 2 SPDT-NC-NO Double Break (1) Z SPDT Make (1) before D 2 1 1 Break (2) (DB-DM) Double Make (2) SPDT Break (1) - Make (2) 3 E SPST-NO Double Make U 2 (DM) (B-M-B) before Break (3) 1 P&B Numbers for Contact Arrangements To simplify the listing of contact arrangements, P&B standard relays carry arrangements; for example: a PM17 relay has a 4PDT (four-pole-double- code numbers to designate the various contact forms listed in the follow- throw) contact arrangement. ing table. These numerals are used as abbreviations of the switching Contact Code and NARM Designator 1—1A SPST-NO 29—8C 8PDT 62—1A + 2C SPST-NO + DPDT 2—1B SPST-NC 30—9A 9PST-NO 63—1B + 2C SPST-NC + DPDT 3—1X SPST-NO-DM 31—9B 9PST-NC 64—2B + 1C DPST-NC + SPDT 4—1Y SPST-NC-DB 32—9C 9PDT 65—1A + 1B + 1C SPST-NO + SPST-NC 5—1C SPDT 33—10A 10PST-NO + SPDT 6—1Z SPDT-NC-NO (DM-DB) 34—10B 10PST-NC 67—3A + 1B 3PST-NO + SPST-NC 7—2A DPST-NO 35—10C 10PDT 68—3A + 1C 3PST-NO + SPDT 8—2B DPST-NC 36—11A 11PST-NO 69—3B + 1C 3PST-NC + SPDT 9—2X DPST-NO-DM 37—11B 11PST-NC 70—3A + 3B 3PST-NO + 3PST-NC 10—2Y DPST-NC-DB 38—11C 11PDT 71—2A + 2C DPST-NO + DPDT 11—2C DPDT 39—12A 12PST-NO 72—2B + 2C DPST-NC + DPDT 12—3A 3PST-NO 40—12B 12PST-NC 73—1A + 3C SPST-NO + 3PDT 13—3B 3PST-NC 41—12C 12PDT 74—3A + 2C 3PST-NO + DPDT 14—3C 3PDT 42—3X 3PST-NO-DM 75—1B + 3C SPST-NC + 3PDT 15—4A 4PST-NO 43—2X + 1Y DPST-NO-DM + SPST-NC-DB 76—1A + 3B SPST-NO + 3PST-NC 16—4B 4PST-NC 44—2X DPST-NO-DM 77—1A + 1B + 2C SPST-NO + SPST-NC 17—4C 4PDT 45—1X + 2Y SPST-NO-DM + DPST-NC-DB + DPDT 18—5A 5PST-NO 46—3Y 3PST-NC-DB 78—1A + 2B + 1C SPST-NO + DPST-NC 19—5B 5PST-NC 47—4X 4PST-NO-DM + SPDT 20—5C 5PDT 48—2X + 2Y 2PST-NO-DM + 2PST-NC-DB 79—2A + 1B + 1C DPST-NO + SPST-NC 21—6A 6PST-NO 49—4Y 4PST-NC-DB + SPDT 22—6B 6PST-NC 50—1A + 1B SPST-NO + SPST-NC 80—2A + 6B DPST-NO + 6PST-NC 23—6C 6PDT 51—1A + 1C SPST-NO + SPDT 81—4A + 4B 4PST-NO + 4PST-NC 24—7A 7PST-NO 52—1B + 1C SPST-NC + SPDT 82—2A + 4C DPST-NO + 4PDT 25—7B 7PST-NC 58—1A + 2B SPST-NO + DPST-NC 83—4A + 1B 4PST-NO + SPST-NC 26—7C 7PDT 59—2A + 1B DPST-NO + SPST-NC 84—4A + 2B 4PST-NO-DPST-NC 27—8A 8PST-NO 60—2A + 2B DPST-NO + DPST-NC 85—3A + 2B 3PST-NO-DPST-NC 28—8B 8PST-NC 61—2A + 1C DPST-NO + SPDT SP—Single Pole 3P—Three Pole SB—Single Break ST—Single Throw DM—Double Make NC—Normally Closed DP—Double Pole 4P—Four Pole DB—Double Break DT—Double Throw NO—Normally Open CO stands for changeover, a term sometimes used for a double throw configuration. Common Contact Material Abbreviations Used in this Databook Ag is silver. AgSnO is silver-tin oxide. PdCu is palladium-copper alloy. AgCdO is silver-cadmium oxide. Au is gold. PdNi is palladium-nickel alloy. AgNi 0.15 is fine grain silver. AuAgNi is gold-silver-nickel alloy. Rh is rhodium. AgNi or AgNi 20 is silver-nickel alloy. AuPtAg is gold-platinum-silver alloy. Ru is ruthenium. AgPd is silver-palladium alloy. AuRh is gold-rhodium alloy. W is tungsten. AgSn is silver-tin alloy. Hg is mercury. Logos of Various Approval Agencies/Laboratories Used in this Databook - UL Recognized for USA. - CSA Certification. - TUV Approved. - Factory Mutual Approved. .. TUV Rheinland - UL Recognized for Canada. - CSA Component Acceptance. - Demko Approved. - Kema-Keur Certification. - UL Recognized for USA & Canada. - VDE Approved - CECC Approved. - UL Listed. - VDE Component Mark - SEV Approved. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: iv specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Circuit Breakers P&B P&B P&B P&B P&B Series W57 W54 W58 W28 W51 Type Thermal Thermal Thermal Thermal Thermal Features • Compact design • Quick connect or screw • Quick connect or screw • Replaces slow blow glass • Rocker actuated breaker/ • Quick connect terminals terminals terminals cartridge fuse and holder switch • Button extends • Button extends • Button extends • Snap-in mounting • Convenient, snap-in mounting for visible trip for visible trip for visible trip • Button provides visible trip • Optional indicator light indication indication indication indication • Quick connect terminals • Push-to-reset operation • Push-to-reset operation • Push-to-reset operation • Push-to-reset or switchable • Push-to-reset operation • Optional protective boot • Optional protective boot version Approximate Size and Weight .575" x 1.378" x 1.22"d .575" x 1.15" x .889"d .66" x 1.38" x 1.38"d .54" x .63" x 1.54"d .598" x 1.311" x 1.232"d (per pole) (14.6 x 29.2 x 22.6d) (14.6 x 35.0 x 31.0d) (16.8 x 34.9 x 34.9d) (13.7 x 15.9 x 39.0d) (15.2 x 33.3 x 31.3d) .9 oz. (25g) .5 oz. (14.3g) 1.5 oz. (43g) .35 oz. (10g) .37 oz. (10.5g) No. of Poles 1 1 1 1 1 Circuit Function Series Trip Series Trip Series Trip Series Trip Series Trip Current Rating 5-40 Amps 4-20 Amps 1-30 Amps 0.5-20 Amps 5-20 Amps Max. Operating 50VDC 50VDC 50VDC 32VDC 50VDC Voltage 250VAC 250VAC 250VAC 250VAC 125 or 250VAC (model dependent) Trip Time at 1-4A Models – 0.5-2A Models – 200% of Rating 5 to 30 Sec. 4 to 40 Sec. 10 to 45 Sec. 4.5 to 28 Sec. 4 to 40 Sec. 5-30A Models – 3-15A Models – 6 to 30 Sec. 2.2 to 15 Sec. Interrupt 1,000A 1,000A 2,000A @ 50VDC 1,000A @ 32VDC 1,000A Capacity 1,000A @ 250VAC or 250VAC Terminal .250" (6.35) .250" (6.35) .250" (6.35) .250" (6.35) .250" (6.35) Options Quick Connect Quick Connect, Quick Connect, Quick Connect Quick Connect or #8-32 Screw #6-32 Screw (Do not solder) PC terminals Mounting 3/8"–24 Threaded Bushing, 3/8"–24 Threaded Bushing, 7/16"–28 Threaded Snaps into 5/8" (15.9) Snaps into Options M11–1.0 Threaded Bushing or M11–1.0 Threaded Bushing or Bushing, panel cutout from .531 x 1.122" M12–1.0 Threaded Bushing M12–1.0 Threaded Bushing 15/32”–32 Threaded the front (13.5 x 28.5) Bushing panel cutout from the front Page Number 103 105 107 110 112 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: v specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Circuit Breakers P&B P&B P&B P&B P&B Series W33 W23 W31 W6 W9 Type Thermal Thermal Thermal Magnetic Magnetic Features • Rocker actuator in various • Push/pull actuation for • Toggle actuation • Compact design • Variety of time delay options colors manual on/off and reset for manual on/off and reset • Variety of time delay options • Toggle actuation • Convenient, snap-in • Toggle actuation for manual on/off and reset mounting for manual on/off and reset • Optional aux. switch • Optional lighted rockers • Optional aux. switch • Models with aux. switch available • Designed to meet IEC and VDE requirements Approximate Size and Weight .98" x 1.89" x 1.72"d .69" x 1.38" x 1.6"d .69" x 1.38" x 1.6"d .75" x 2.0" x 1.64"d .75" x 2.5" x 2.1"d (per pole) (24.9 x 48.0 x 43.8d) (17.5 x 34.9 x 40.6d) (17.5 x 34.9 x 40.6d) (19.1 x 50.8 x 42.1d) (19.1 x 63.5 x 53.0d) 1.2 oz. (35g) 2 oz. (57g) 2 oz. (57g) 2.5 oz. (71g) 2.5 oz. (71g) No. of Poles 1 or 2 1 1 1 through 4 1 through 4 Circuit Function Series Trip, both poles Series Trip Series Trip Series Trip w/ or Series Trip w/ or or w/o Aux. Switch w/o Aux. Switch Series Trip, one pole; Switch only, one pole Current Rating 5-20 Amps 1-50 Amps 1-50 Amps .25-50 Amps .25-50 Amps Max. Operating 50VDC 50VDC 50VDC 65VDC 65VDC Voltage 250VAC 250VAC 250VAC 277VAC 277VAC 480VAC 3Ş-Wye 480VAC 3Ş-Wye Trip Time at 10 to 45 Sec. 1-3A Models – 1-3A Models – 30ms to 150 Sec. 30ms to 150 Sec. 200% of Rating 11 to 30 Sec. 11 to 30 Sec. depending upon trip curve depending upon trip curve 5-50A Models – 5-50A Models – specified. specified. 6 to 22 Sec. 6 to 22 Sec. Interrupt 1,000A @ 50VDC 1-25A Models – 1-25A Models – 0.25-20A Models – 2,000A @ 65VDC Capacity 2,000A @ 250VAC 2,000A @ 50VDC 2,000A @ 50VDC 2,000A @ 65VDC 5,000A @ 277VAC 1,000A @ 250VAC 1,000A @ 250VAC 5,000A @ 277VAC or 480VAC, 3Ş-Wye 30-50A Models – 30-50A Models – or 480VAC, 3Ş-Wye 1,000A @ 50VDC 1,000A @ 50VDC 21-50A Models – or 250VAC or 250VAC 2,000A @ 65VDC 2,500A @ 277VAC Terminal .250" (6.35) #8-32 Screw #8-32 Screw .250" (6.35) #10-32 Stud Options Quick Connect, Quick Connect, Solder #10-32 Screw Mounting Snaps into 3/8"–24 Threaded 15/32"–32 Threaded #6-32 Tapped Holes, #6-32 Tapped Holes, Options .875 x 1.75" Bushing Bushing M3 Tapped Holes M3 Tapped Holes (22.2 x 44.5) panel cutout from the front Page Number 114 116 116 119 119 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: vi specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Transformers PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS UNLIMITED UNLIMITED UNLIMITED UNLIMITED UNLIMITED Series 4000 4000 4000 4000 4000 Type Class II UL1585 Class II UL1585 Class II UL1585 Class II UL1585 Class II UL1585 Transformer Transformer Transformer Transformer Transformer Inherently Inherently Inherently Inherently Inherently Energy Limited Energy Limited Energy Limited Energy Limited Energy Limited VA Rating 5, 10, 20 & 30VA 10, 20 & 30VA 20 & 40VA 40 & 50VA 40 & 50VA Terminal Options Wire Leads WIre Leads Quick Connect Quick Connect Wire Leads & Screws Mounting Options Foot or Panel Foot or Panel Plate Foot or Panel Foot or Panel Agency Approval Page Number 204 205 206 207 208 Transformers PRODUCTS PRODUCTS PRODUCTS PRODUCTS PRODUCTS UNLIMITED UNLIMITED UNLIMITED UNLIMITED UNLIMITED Series 4000 4700 57 4000 4700 Type Class II UL1585 UL506 Transformer Class II UL1585 UL506 Transformer Transformer Transformer Transformer Relay Non-Inherently Energy Limited Non-Inherently Energy Limited Non-Fused Non-Fused Inherently Energy Limited Secondary Fusing Required Secondary Fusing Required (Opt. integral fuse or breaker) 9100 or 9400 Series (Opt. integral fuse or breaker) Relay VA Rating 60 & 75VA 60 & 75VA 60, 100 & 150VA 60, 100 & 150VA 40VA Terminal Options Wire Leads Quick Connect Wire Leads and Screws Quick Connect Wire Leads (optional Quick Connects) Mounting Options Foot or Panel Foot or Panel Foot Foot Plate Agency Approval Page Number 209 210 211 211 212 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: vii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Low-Signal Printed Circuit Board Relays OEG OEG P&B P&B P&B AXICOM OEG Series JWS JWD OL OMR 159/160 V23026 TSC Features • 10W rating • 10W rating • 10W rating • 10W rating • 10W rating • 1A rating • 1A rating • Dry reed relay • Dry reed relay • Dry reed relay • Dry reed relay • Hg wetted reed • Miniature relay • Miniature relay • Plastic dust cover • Open or with relay • SIP configuration • DIP configuration • Sealed case • Meets FCC Part 68 • Molded package • Molded package • Consult factory for plastic dust cover • Fast operating • Through-hole or isolation wave solderable speed • Wave solderable • Wave solderable surface mount • Sealed, immerssion and immersion and immersion and immersion • No contact bounce • Low coil power cleanable case cleanable model • Single, dual and cleanable cleanable requirement • Sensitive coil bifilar coils • Latching or non- • Single-side stable latching or bistable contacts Approximate .80" x .26" x .31"h .77" x .30" x .32"h .795" x .31" x .26"h .8" x .32" x .35"h .4" x .535" x 1.56"h .51" x .31" x .27"h .49" x .29" x .39"h Dimensions (20.2 x 7.9 x 6.6h) (20.3 x 8.0 x 9.0h) (10.2 x 13.6 x 39.6h) (20.3 x 6.6 x 7.8h) (19.6 x 7.62 x 8.0h) (13 x 7.9 x 6.9h) (12.5 x 7.5 x 10.0h) 0.08 oz. (2g) 0.08 oz. (2g) 0.07 oz. (2g) 0.16 oz. (4.5g) 1 oz. (28g) 0.06 oz. (1.7g) 0.1 oz. (3g) Contact 1 Form A 1 Form A, 1 Form B 1 Form A, 1 Form A, 1 Form C, 1 Form C 1 Form C Arrangements 2 Form A 2 Form A 1 Form D 1 Form C, 2 Form A Contact Ru Ru Rh & Ru Rh & Ru Hg RhAu overlay Au overlay Material PdNi AgNi Maximum 10W 10W 10W 10W 2A 1A, AC or DC 1A, AC or DC Contact Form A & B 125VAC, 150VDC 30VDC, 120VAC Rating 3W 60VA, 30W 24W or 120VA Form C resistive resistive 8 8 9 8 8 8 7 Expected 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 5 x 10 Ops. Mechanical Life 6 6 9 6 6 5 5 Expected 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 2.5 x 10 @ 0.4A, 1 x 10 Electrical 125VAC 6 Life at 3 x 10 @ 1A, Rated Load 24VDC Nominal 5-24VDC 5-24VDC 6-24VDC 5-24VDC 2.2-9,000 ohms 5-24VDC 5-24VDC Coil Voltage Nominal 50-272mW 50-288mW 100-270mW 100-280mW 20-115mW 67-128mW 150mW Coil Power Mounting PC board PC board PC board PC board PC board PC board PC board Options (THT and SMT) Sockets / — Fits 14-pin — — — — — Connectors IC socket Page Number 303 303 304 306 308 314 316 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: viii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Low-Signal Printed Circuit Board Relays OEG AXICOM AXICOM P&B AXICOM AXICOM AXICOM Series T81 OUAZ IM FP2 V23079 FT2/FU2 FX2 Features • 0.5 - 1A rating • 0.5 - 1A rating • 2A rating • 2A rating • 2A rating • 2A rating • 2A rating • Miniature, high • Miniature, high • Ultraminiature relay • Low profile relay • Vertical mount • Vertical mount • Vertical mount density package density package • High sensitivity coil • High sensitivity coil • High dielectric • High dielectric • Latching and non- • Tape sealed, • Tape sealed, • High mechanical • High mechanical • Latching and non- version latching versions immersion immersion shock resistance shock resistance latching versions • Meets FCC Part 68 • Meets FCC Part 68 cleanable case cleanable case • Low coil power • Latching and non- • Meets FCC Part 68 insulation insulation • Sensitive coil option • Sensitive coil option requirement latching versions insulation • Sealed immersion • Sealed immersion • Meets FCC Part 68 • Meets FCC Part 68 • Sealed immersion • Sealed immersion cleanable case cleanable case isolation isolation cleanable case cleanable case Approximate .61" x .45" x .43"h .61" x .45" x .43"h .393" x .236" x .222"h .574" x .35" x .196"h .574" x .283" x .389"h .590" x .295" x .377"h .587" x .283" x .421"h Dimensions (15.4 x 11.4 x 11.0h) (15.4 x 11.4 x 11.0h) (10 x 6 x 5.65h) (14.02 x 9.02 x 5.0h) (14.6 x 7.2 x 9.9h) (15.0 x 7.5 x 9.6h) (14.9 x 7.3 x 10.7h) 0.14 oz. (4g) 0.14 oz. (4g) 0.03 oz. (.75g) 0.08 oz. (2g) 0.084 oz. (2.5g) 0.12 oz. (3g) 0.1 oz. (2.5g) Contact 1 Form C 1 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C Arrangements Contact Au overlay Au overlay Au overlay Au overlay Au overlay Au overlay PdRu Material AgPd AgPd PdRu AgNi AgNi AgNi Maximum 1A @ 24VDC or 1A @ 24VDC or 2A, AC or DC 2A, AC or DC 2A, AC or DC 2A, AC or DC 2A, AC or DC Contact 0.5A @ 120VAC, 120VAC, 250VAC, 220VDC 125VDC, 250VAC 220VDC, 250VAC 125VDC, 250VAC 220VDC, 250VAC Rating resistive resistive 60W or 62.5VA, 30W or 62.5VA, 60W or 60VA, 30W or 62.5VA, 60W or 62.5VA, resistive resistive resistive resistive resistive 6 6 8 8 8 8 8 Expected 5 x 10 Ops. 5 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. Mechanical Life 5 5 5 5 5 5 5 Expected 1.5 x 10 @ 1A, 1 x 10 @ 1A 5 x 10 @ 1A, 3 x 10 @ 1.25A, 2 x 10 @ 2A, 1 x 10 @ 1.25A, 5 x 10 @ 2A, Electrical 24VDC 30VDC 24VDC 30VDC 24VDC 30VDC 5 5 Life at 1 x 10 @ 0.5A, 1 x 10 @ 2A, Rated Load 120VAC 30VDC Nominal 3-24VDC 5-24VDC 1.5-24VDC 3-48VDC 3-48VDC 3-48VDC 3-48VDC Coil Voltage Nominal (standard) 450mW (standard) 450mW 100-200mW 80-200mW 70-140mW 200-300mW 80-300mW Coil Power (sensitive) 200mW (sensitive) 200mW Mounting PC board, PC board, PC board PC board PC board PC board PC board Options Socket Socket (THT and SMT) (THT) (THT and SMT) (THT and SMT) (THT) Sockets / Fits 12-pin IC socket Fits 12-pin IC socket — — — — — Connectors Page Number 318 319 321 323 325 327 329 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: ix specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Low-Signal PC Board Relays Mid-Range PC Board Relays P&B AXICOM AXICOM AXICOM SCHRACK SCHRACK OEG Series 190 V23105 MT2 MT4 PE RE PCN Features • 2A rating • 3A rating • 1.25A rating • 1.25A rating • 5A rating • 6A rating • 3A rating • Mini DIP relay • Mini DIP relay • Miniature, telecom • Miniature, telecom • Sensitive coil • Sensitive coil • Ultra slim .197" • Various coil • High sensitivity coil relay relay • Flux-tight case for • DIP cofiguration (5mm) package sensitivity options • Sealed immersion • Meets FCC Part 68 • Meets FCC Part 68 wave soldering • 4kV coil-to-contact • Sensitive coil • Sealed immersion cleanable case isolation isolation • Class F coil isolation • 3kV coil-to-contact cleanable case • Meets FCC Part 68 • Sealed, immersion • Sealed, immersion • Immersion isolation • Meets FCC Part 68 insulation cleanable case cleanable case cleanable case with • Immersion insulation knock-off nib cleanable case • VDE 0110 Approximate .807" x .398" x .453"h .795" x .394" x .45"h .795" x .393" x .433"h .795" x .582" x .433"h .79" x .39" x .39"h .79" x .39" x .42"h .79" x .197" x .492"h Dimensions (20.5 x 10.1 x 11.5h) (20.2 x 10.0 x 11.43h) (20.2 x 10.0 x 11.0h) (20.2 x 14.8 x 11.0h) (20 x 10 x 10h) (20 x 10 x 10.6h) (20 x 5 x 12.5h) 0.21 oz. (6g) 0.2 oz. (6g) 0.18 oz. (5g) 0.25 oz. (7g) 0.18 oz. (5g) 0.18 oz. (5g) 0.1 oz. (3g) Contact 2 Form C 2 Form C 2 Form C 4 Form C 1 Form C 1 Form A 1 Form A Arrangements Contact Au overlay Ag Au overlay Au overlay AgNi Au overlay AgNi AgNi 90/10 AgCdO or AgNi Material AgNi Au overlay AgNi Maximum 2A, AC or DC 3A, AC or DC 1.25A, AC or DC 1.25A, AC or DC 5A @ 250VAC 6A @ 250VAC 3A @ 250VAC Contact 125VDC, 125VAC 250VDC, 230VAC 150VAC or VDC 150VAC or VDC Rating 60W or 62.5VA, 60W or 120VA, 30W or 62.5VA, 30W or 62.5VA, resistive resistive resistive resistive 6 6 8 8 6 7 7 Expected 15 x 10 Ops. 15 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 15 x 10 Ops. 3 x 10 Ops. 2 x 10 Ops. Mechanical Life 5 5 5 5 5 5 5 Expected 1 x 10 @ 1.8A, 1 x 10 @ 2A, 2 x 10 @ 1.25A, 2 x 10 @ 1.25A, 1 x 10 5 x 10 1 x 10 Electrical 30VDC 30VDC 24VDC 24VDC Life at Rated Load Nominal 3-48VDC 3-48VDC 4.5-48VDC 4.5-48VDC 5-48VDC 5-48VDC 5-24VDC Coil Voltage Nominal 150-500mW 150-500mW 150-550mW 300mW 200mW 200mW 120mW Coil Power Mounting PC board PC board PC board PC board PC board PC board PC board Options Sockets / Fits 16-pin Fits 16-pin Fits 16-pin — — — — Connectors IC Socket IC Socket IC Socket Page Number 331 333 335 337 403 405 407 º Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: x specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range Printed Circuit Board Relays SCHRACK OEG OEG OEG SCHRACK P&B P&B PCJ PCH OJ/OJE V23092 (SNR) RY II T75 T77 Series • 8A rating • 5A rating • 5-10A rating • 3 - 10A rating Features • 6A rating • 8 - 14A rating • 3 - 10A rating • Slim profile for high • Small size relay • Small size • Ultra slim .197" • Meets international • Meets international • Small size specifications density mount • 1 Form C contact • 4,000 Vrms coil-to- (5mm) package specifications • 4,000 Vrms coil-to- • 200mW coil arrangement contact breakdown • Low coil power • Sensitive coil • Sensitive coil contact breakdown • Low profile design • 4,000Vrms coil-to- • 4,000 Vrms coil-to- • Sealed or flux tight • Sealed or flux tight requirement • Low profile design contact breakdown contact breakdown case • Immersion • Flux-tight or • Immersion case washable case • UL508 • UL873 • Sensitive models cleanable case cleanable case • Class F coil • UL Class F coil available • DIN mount module insulation available available .80 x .28 x .59h .78 x .39 x.60 .72" x .39" x .57"h .20" x 1.1" x .59"h 1.12" x .40" x .48"h 1.12" x .39" x .59"h .72" x .39" x .57"h Approximate (28.5 x 10.1 x 12.3h) (20.4 x 7 x 15h) (19.8 x 9.9 x 15.2h) (18.2 x 10.0 x 14.7h) Dimensions (5 x 28 x 15h) (28.5 x 10 x 15h) (18.2 x 10.0 x 14.7h) .14 oz (4g) .25 oz (7g) 0.36 oz. (9g) 0.21 oz. (6g) 0.28 oz. (8g) 0.65 oz. (18.5g) 0.36 oz. (9g) 1 Form A 1 Form C 1 Form A Contact 1 Form A, 1 Form A, 1 Form A, 1 Form A 1 Form C Arrangements 1 Form C 1 Form C AgNi AgSnO Ag AgSnO, AgCdO, AgNi 0.15, AgCdO Ag Contact au plated AgNi0.15, Ag Alloy Ag Alloy Material Au plated AgSnO, AgNi 90/10 AgSnO 5A @ 250VAC or 10A @ 125VAC (NO) 3A @ 28VDC or 6A, 25VAC 8A @ 250VAC 14A @ 120VAC, 3A @ 28VDC or Maximum 28VDC 5A @ 277VAC or 250VAC Contact resistive 250VAC resistive 30VDC (NO) 5A @ 28VDC or 10A @ 240 VAC 10A @ 28VDC or Rating 3A @ 277VAC or 120VAC 250VAC 8A @ 24VDC 30VDC (NC) 10A @ 28VDC or resistive 120VAC 7 6 6 7 7 7 7 5 x 10 Ops. 5 x 10 Ops. 1 x 10 Ops. 2 x 10 Ops. 3 x 10 Ops. 2 x 10 Ops. 1 x 10 Ops. Expected Mechanical Life 5 5 5 5 4 4 5 1 x 10 1 x 10 1 x 10 5 x 10 1 x 10 5 x 10 1 x 10 Expected Electrical Life at Rated Load 5-24VDC 5-48VDC 5-48VDC 12-24VDC 5-48VDC 3-60VDC 3-24VDC Nominal Coil Voltage 200mW 200-400mW 200-450mW Nominal 210mW 220mW 230mW 200-450mW Coil Power PC board PC board PC board PC board PC board PC board PC board Mounting Options — — — — — — — Sockets / Connectors 416 418 422 409 412 414 420 Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xi specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range Printed Circuit Board Relays SCHRACK OEG OEG SCHRACK P&B P&B OEG PCD/PCDF PB V23148 (U/UB) T73 OUDH T7N PCE Series • 7A rating • 10A rating Features • 10-15A rating • 10A rating • 10A rating • 10A rating • 10A rating • Low-profile relay • Miniature relay • Standard or • Low-profile relay • Low-profile relay • Low-profile relay • Low-profile relay latching type • Flux tight or sealed • Sensitive coil • Low complexity • Sealed case • UL Class F coil • UL Class F coil • Sealed or flux tight design • Sensitive version • UL508 case standard standard case available • Class A coil • Flux tight case • Class F coil • Immersion • Immersion • Available with quick • Available Class F • 2kV or 4kV insulation standard insulation standard cleanable sealed cleanable sealed dieleectric options connect terminals coil insulation case case for load • Sealed case .90" x .63" x .40"h .59" x .59" x .79"h .64" x .84" x .59"h .88" x .69" x .61"h .88" x .69" x .61"h .87" x .63" x .65"h .87" x .63" x .65"h Approximate (16.2 x 21.2 x 14.9h) (22.3 x 17.6 x 15.5h) Dimensions (23.0 x 16.1 x 10.2h) (15.0 x 15.0 x 20.0h) (22.3 x 17.6 x 15.5h) (22.0 x 16.0 x 16.4h) (22.0 x 16.0 x 16.4h) 0.35 oz. (10g) 0.2 oz. (5.4g) 0.34 oz. (9.5g) 0.42 oz. (12g) 0.42 oz. (12g) 0.38 oz. (11g) 0.38 oz. (11g) Contact 1 Form A 1 Form A 1 Form A, 1 Form B, 1 Form A, 1 Form A, 1 Form A, 1 Form A, 1 Form C 1 Form C Arrangements 1 Form C 1 Form C 1 Form C AgSnO AgNi 90/10 AgNi 0.15 AgCdO Ag Alloy AgCdO AgCdO, Contact Material AgSnO 15A @ 125VAC (QC 10A @ 240VAC (NO) 7A @ 250VAC or 10A @ 120VAC 10A @ 120VAC 10A @ 240VAC 10A @ 250VAC Maximum 24VDC 6A @ 24VDC Contact version only) 3A @ 240VAC (NC) 6A @ 24VDC or 28VDC or 28VDC 10A @ 28VDC or resistive Rating 250VAC resistive 7 7 7 6 7 7 7 1 x 10 Ops. 5 x 10 Ops. 2 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. Expected Mechanical Life 4 5 5 5 5 5 5 1 x 10 1 x 10 at 6A, 240VAC 5 x 10 at 7A (NO) 1 x 10 1 x 10 1 x 10 Ops. 1 x 10 Ops. Expected Electrical (NO) 4 2.5 x 10 at 10A, Life at Rated Load 240VAC (NO) 5-48VDC 6-24VDC 6-48VDC 3-48VDC 5-48VDC 3-48VDC 6-48VDC Nominal Coil Voltage Nominal 200-250mW 360mW 330-800mW 450-660mW 450-660mW 360mW 360mW Coil Power PC board PC board PC board PC board PC board PC board, PC board, Mounting Options Socket Socket — — — — — PC terminals PC terminals Sockets / Connectors (10A rated) (10A rated) 424 426 428 430 432 434 436 Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range Printed Circuit Board Relays OEG OEG P&B/SCHRACK SCHRACK SCHRACK P&B OEG ORWH T7C SRUDH SRUUH RT (DC) RT (AC) RT (Sens.) Series • 10A rating • 15A rating • 8-16A rating • 8-16A rating • 10A rating Features • 5-12A rating • 12A rating • Low-profile relay • Compact design • Compact design • Compact design • Immersion • Immersion • Sensitive coil • Flux-tight or sealed • 1,500 Vrms coil-to- cleanable or flux- cleanable or flux- • Immersion • 1,500 Vrms coil-to- • 1,500 Vrms coil-to- case contact breakdown contact breakdown contact breakdown tight case tight case cleanable or flux- • Immersion • Low profile case • Low profile case tight case • Immersion • Immersion cleanable or flux- cleanable or flux- cleanable or flux- • 10mm coil-to- • 10mm coil-to- • Low profile case tight case contact spacing for contact spacing for • 10mm coil-to- tight case tight case • UL Class F coil 5kV isolation 5kV isolation contact spacing for 5kV isolation standard .75" x .61" x .6"h .80" x .65" x .81"h .80" x .65" x .81"h .80" x .65" x .81"h 1.14" x .50" x .62"h 1.14" x .50" x .62"h 1.14" x .50" x .62"h Approximate (20.3 x 16.5 x 20.6h) (20.3 x 16.5 x 20.6h) (29 x 12.7 x 15.7h) (29 x 12.7 x 15.7h) (29 x 12.7 x 15.7h) Dimensions (20.3 x 16.5 x 20.6h) (20.3 x 16.5 x 20.6h) 0.33 oz. (9.5g) 0.42 oz. (12g) 0.42 oz. (12g) 0.42 oz. (12g) 0.42 oz. (12g) 0.42 oz. (12g) 0.42 oz. (12g) Contact 1 Form A, 1 Form A, 1 Form A, 1 Form A, 1 Form A, 2 Form A, 1 Form A, 2 Form A, 1 Form A, 1 Form C 1 Form C 1 Form C, 2 Form C 1 Form C, 2 Form C 1 Form C Arrangements 1 Form C 1 Form C AgCdO AgCdO, Ag AgCdO AgCdO AgNi 90/10 AgNi 90/10 AgNi 90/10 Contact Material 10A @ 277VAC or 10A @ 240VAC or 10A @ 240VAC or 10A @ 240VAC or 16A, AC or DC 16A, AC or DC 10A, AC Maximum 28VDC (NO) 28VDC 250VAC, 30VDC 250VAC, 30VDC 250VAC Contact 28VDC 28VDC 15A @ 120VAC (NO) 12A @ 120VAC 12A @ 120VAC 15A @ 120VAC (16A version) (16A version) Rating 10A/6A @ 250VAC or 28VDC (NO/NC) 7 7 7 7 7 7 7 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. Expected Mechanical Life 5 5 4 4 5 5 5 1 x 10 Ops. at 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 5 x 10 5 x 10 1.5 x 10 Expected 10A @ 250VAC (NO) (16A version) (16A version) Electrical Life at Rated Load 3-48VDC 3-48VDC 6-48VDC 3-48VDC 5-110VDC 24-230VAC 5-60VDC Nominal Coil Voltage Nominal 360mW 360mW 360mW 360-510mW 400mW .75VA 250mW Coil Power PC board, PC board, PC board, PC board, PC board, PC board, PC board, Mounting Socket Socket Socket Socket Socket Options Socket Socket PC terminals PC terminals PC terminals PC terminals Screw terminals, Screw terminals, Screw terminals, Sockets / (10A rated) (10A rated) PC terminals PC terminals PC terminals Connectors (10A rated) (10A rated) 438 440 442 442 446 448 451 Page Number Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xiii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range Printed Circuit Board Relays SCHRACK SCHRACK OEG SCHRACK OEG OEG OEG Series RTH (Hi-temp) RT (Hi-inrush) OMI/OMIH OMI 2 pole OZ/OZF 0429 OMIT Features • 10-16A rating • 16A rating • 16A rating • 10-16A rating • 5A rating • 20A rating • 10A rating • High-temp version • Handles inrush • 5,000 Vrms coil-to- • 5,000 Vrms coil-to- • 5,000 Vrms coil-to- • Handles inrush • 5,000 Vrms coil-to- for up to 105°C currents to 80A currents to 80A contact breakdown contact breakdown contact breakdown contact breakdown • Immersion • Immersion • Sealed or flux-tight • Sealed or flux-tight • Flux-tight or sealed • Flux-tight case • Flux-tight or sealed cleanable or flux- cleanable or flux- • Low profile case case case case case tight case tight case • 16A type available • TV-8 rating available • 8mm coil-to-contact • TV-5 rating • Low profile case • Low profile case spacing for 4kV (OMIH) (OZT) • 10mm coil-to- • 10mm coil-to- • Quick connect isolation contact spacing for contact spacing for terminal available 5kV isolation 5kV isolation for load (OZF) Approximate 1.14" x .50" x .62"h 1.14" x .50" x .62"h 1.15 x .50 x .81h 1.15 x .50 x .81h 1.15 x .50 x .81h 1.12" x .49" x .59"h 1.15 x .50 x .81h Dimensions (29 x 12.7 x 15.7h) (29 x 12.7 x 15.7h) (28.5 x 12.5 x 15.0h) (29.2 x 12.8 x 20.6h) (29.2 x 12.8 x 20.6h) (29.2 x 12.8 x 20.6h) (29.2 x 12.8 x 20.6h) 0.42 oz. (12g) 0.42 oz. (12g) .46 oz (13g) .46 oz (13g) .46 oz (13g) 0.35 oz. (10g) .46 oz (13g) Contact 1 Form A, 1 Form A 1 Form A, 2 Form A, 1 Form A, 1 Form A 1 Form A, Arrangements 1 Form C, 1 Form C 2 Form C 1 Form C 1 Form C Contact AgNi 90/10 AgNi 90/10, Ag Alloy (OMI) Ag Alloy Ag Alloy AgSnO AgSnO Material AgSnO with W prerun AgSnO (OMIH) AgSnO Maximum 16A, AC 16A, AC 10A @ 240VAC or 5A @ 240VAC or 20A @ 120VAC, 10A, AC 10A @ 240VAC, Contact 250VAC 250VAC 250VAC 24VDC (OMI) 24VDC 16A @ 240VAC, TV-5 @ 120VAC, Rating (standard coil version) 80A for 20ms TV-8 @ 120VAC 80A for 20ms 10A @ 30VDC 10A, AC 16A @ 240VAC or 250VAC 24VDC (OMIH) (sensitive coil version) 7 7 6 7 7 7 7 Expected 1 x 10 Ops. 3 x 10 Ops. 1 x 10 1 x 10 1 x 10 5 x 10 Ops. 1 x 10 Mechanical Life 5 5 4 5 5 5 5 Expected 2.5 x 10 1 x 10 1 x 10 1 x 10 1 x 10 5 x 10 1 x 10 Electrical (Hi-performance Life at contact) Rated Load Nominal 9-24VDC 12-60VDC 6-60VDC 5-48VDC 3-48VDC 5-48VDC 5-48VDC Coil Voltage Nominal 400mW (standard) 400mW 480mW 540mW (Sensitive) 540mW (Sensitive) 540mW (Sensitive) 540mW (Sensitive) Coil Power 250mW (sensitive) 720mW (Standard) 720mW (Standard) 720mW (Standard) 720mW (Standard) Mounting PC board, PC board, PC board, PC board, PC board, PC board, PC board, Options Socket Socket Socket Socket Quick connect (for Socket Socket load), Socket Sockets / Screw terminals, Screw terminals, Screw terminals, Screw terminals, Screw terminals, Screw terminals, Screw terminals, Connectors PC terminals PC terminals PC terminals PC terminals PC terminals PC terminals PC terminals Page Number 453 455 458 460 462 455 464 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xiv specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range Printed Circuit Board Relays OEG OEG OEG OEG OEG OEG OEG Series OMIF PCI OSZ SDT SDT–R OSA PCK Features • 20A rating • 3A rating • TV-3/4 rating • TV-8 rating • 10A/TV-5 rating • TV-8/TV-5 rating • 16A rating • Flux-tight case • Slim design • 4,000 Vrms coil-to- • 4,000 Vrms coil-to- • Standard or • Flux-tight case • 5,000 Vrms coil-to- • 5,000 Vrms coil-to- • Sealed or flux- • Low profile case contact breakdown contact breakdown sensitive coil contact breakdown contact breakdown tight case • Sealed or flux-tight • Sealed or flux-tight • 4,000 Vrms coil-to- • 3,000 Vrms coil-to- • Quick connect • Quick connect • Magnetic blowout contact breakdown case case contact breakdown terminals for load terminals for load option for DC loads • Flux-tight case • Flux-tight case • Handles audio speaker loads Approximate 1.14" x .50" x .96"h .945" x .394" x .984"h .96" x .508" x .976"h .96" x .409" x .984"h .945" x .394" x .984"h .96" x .508" x .976"h .866 x .417 x 1.05h Dimensions (29.2 x 12.8 x 24.5h) (24 x 10 x 25h) (24.4 x 12.9 x 24.8h) (24.4 x 12.9 x 24.8h) (24.4 x 10.4 x 25h) (24 x 10.4 x 25h) (22 x 10.6 x 26.7h) 0.53 oz. (15g) 0.41 oz. (10.5g) 0.46 oz. (13g) 0.39 oz. (11g) 0.39 oz. (11g) 0.46 oz. (13g) .46 oz (13g) Contact 1 Form A 2 Form A 1 Form A 1 Form A 1 Form A 2 Form A 1 Form A Arrangements Contact AgSnO Ag Alloy AgSnO AgSnO AgSnO AgSnO (DM5 type) AgSnO Material AG-GS Alloy (DM3) Maximum 20A @ 125VAC, 3A @ 120VAC or TV-8 @ 120VAC (UL) TV-5 @ 120VAC (UL) TV-8 @ 120VAC (UL) TV-3 @ 120VAC (UL) 16A @ 250VAC or Contact 16A @ 240VAC, 24VDC TV-4 @ 120VAC (CSA) 16A @ 120VAC or 10A @ 250VAC or 10A @ 250VAC or 24VDC Rating 16A @ 24VDC 24VDC 30VDC 30VDC (Std. Coil) 5A @ 120VAC or 30VDC (DM5) TV-5 @ 120VAC (UL) 3A @ 120VAC or 5A @ 250VAC or 30VDC (Sens. Coil) 24VDC (DM3) 7 7 7 7 7 7 6 Expected 1 x 10 Ops. 1 x 10 Ops. 1 x 10 1 x 10 1 x 10 1 x 10 Ops. 2 x 10 Mechanical Life 5 5 5 5 5 5 5 Expected 1 x 10 1 x 10 1 x 10 1 x 10 1 x 10 1 x 10 1 x 10 Electrical 4 4 4 Life at 2.5 x 10 2.5 x 10 2.5 x 10 Rated Load at TV-8 at TV-5 at TV-5 or TV-8 Nominal 12-24VDC 5-24VDC 5-48VDC 5-48VDC 5-48VDC 5-48VDC 5-24VDC Coil Voltage Nominal 540mW 350mW 540mW 540mW 540mW 250mW (Sensitive) 500mW Coil Power 540mW (Standard) Mounting PC board, PC board PC board PC board PC board PC board PC board Options Socket Sockets / Screw terminals, — — — — — — Connectors PC terminals Page Number 466 468 472 474 476 470 478 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xv specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range Printed Circuit Board Relays SCHRACK SCHRACK SCHRACK SCHRACK SCHRACK SCHRACK SCHRACK Series V23057 (Card E) RP II/2 RP II/1 RP 3 SL 0409 V23077 (IF) 0410 Features • 8A rating • 8A rating • 120A inrush rating • 500A inrush rating • 16 rating • 8-16A rating • 16A rating • Horizontal or vertical • Slim design • Slim design • 16A rating • 10A rating • Quick connect • Quick connect version • Sealed or flux- • Standard and • Flux-tight case terminals for load • Sealed or flux- terminals for load • Single or bifurcated tight case tight case latching types • 4,000 Vrms coil-to- • 4,000 Vrms coil-to- • 4,000 Vrms coil-to- contacts • 4,000 Vrms coil-to- • Sealed or flux-tight contact breakdown contact breakdown • 4,000 Vrms coil-to- contact breakdown • 4,000 Vrms coil-to- contact breakdown contact breakdown case • Flux-tight case • Form X model contact breakdown • 4,000 Vrms coil-to- provides 3mm • Washable case contact breakdown contact gap • Flux-tight case Approximate 1.10" x .984" x .425"h 1.14" x .496" x 1.0"h 1.14" x .496" x 1.0"h 1.12" x .48" x .996"h .96" x .409" x .984"h 1.594" x .52" x 1.14"h 1.594" x .492" x 1.12"h Dimensions (28.0 x 25.0 x 10.8h) (29.0 x 12.6 x 25.5h) (28.5 x 12.2 x 25.3h) (24.4 x 10.4 x 25h) (40.5 x 13.2 x 29h) (29.0 x 12.6 x 25.5h) (40.5 x 12.5 x 28.5h) 0.28 oz. (8g) 0.63 oz. (18g) 0.63 oz. (18g) 0.63 oz. (18g) 0.35 oz. (10g) 0.92 oz. (26g) 0.85 oz. (24g) Contact 1 Form A. 2 Form A, 1 Form A, 1 Form A 1 Form A 1 Form A, 1 Form A, 1 Form B, Arrangements 1 Form C 2 Form C 1 Form B, 1 Form C 1 Form X (only VDE) Contact AgNi 0.15, AgCdO, AgCdO, AgSnO AgCdO with AgCdO AgSnO, Material AgNi 20, AgCdO AgNi 0.15 W prerun AgNi 0.15 AgNi (1 Form X only) Maximum 8A @ 250VAC 8A @ 250VAC 16A @ 250VAC 120A peak inrush 500A peak inrush 16A @ 250VAC 16A @ 250VAC Contact 16A @ 250VAC 10A @ 250VAC 12A @ 250VAC Rating 5A @ 250VAC with 8A @ 250VAC TV-8 @ 120VAC AgNi 0.15 7 7 7 7 7 7 7 Expected 2 x 10 Ops. 2 x 10 Ops. 3 x 10 Ops. 3 x 10 3 x 10 3 x 10 1 x 10 Mechanical Life 5 5 5 5 5 5 5 Expected 2.5 x 10 1 x 10 1.5 x 10 2 x 10 2.5 x 10 1 x 10 (Form A) 1 x 10 (Form A) 5 Electrical (AgCdO) (AgCdO) 1.5 x 10 (Form B) 4 4 4 Life at 2.5 x 10 5 x 10 (Form B) 3 x 10 (Form X) Rated Load at TV-8 Nominal 6-60VDC 5-110VDC 5-60VDC 6-60VDC 6-48VDC 5-110VDC 6-60VDC Coil Voltage Nominal 450-500mW 500mW 500mW - 1.5W 820mW 360mW 500mW 360mW Coil Power Mounting PC board PC board, PC board PC board PC board PC board, PC board Options Socket Socket Sockets / — Screw terminals, — — — Screw terminals, — Connectors PC terminals PC terminals Page Number 480 482 484 486 488 489 491 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xvi specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Mid-Range P. C. Board Relays Power Printed Circuit Board Relays P&B P&B OEG SCHRACK P&B OEG P&B P&B 491 T92 Series PCG 0430 600 PCF T90 T9A • 30A rating Features • TV-5 rating • 15A rating • 25A rating • 30A rating • 20A rating • 10-16A rating • 30A rating • QC and PC • Two pole unit can • 4,000 Vrms coil- • 4,000 Vrms coil- • Sensitive coil • 5,000Vrms coil- • Less than 1W • QC and PC break both sides to-contact • Unsealed dust to-contact terms. terms. to-contact coil power • Meets UL 873 / of the AC line breakdown breakdown cover or sealed breakdown requirement • Meets UL 873 / • PC board or • Flux-tight case case • Flux-tight case UL 508 spacings UL 508 spacings • Plastic dust cover • Class F insulation • Optional flanged panel mount • PC board, bracket • Range of contact • Quick connect • Open, dust cover • Optional flanged • Ideal for HVAC / materials, ratings terminals for load case for panel case for panel or panel mount or immersion mounting appliance apps. • 3mm contact gap cleanable case mounting • 8mm spacing version w/ or w/o magnetic blowout 1.26" x 1.08" x 1.10"h 2.06" x 1.36" x 1.21"h Approximate 1.11" x .56" x .98"h 1.15 x .51 x .81h 1.25" x .775" x 1.2"h 1.2" x .63" x 1.04"h 1.20" x .95" x .67"h 1.27" x 1.08" x 1.10"h (52.3 x 34.5 x 30.7h) Dimensions (28.2 x 14.2 x 24.9h) (31.8 x 19.7 x 30.5h) (30.4 x 16.0 x 26.5h) (32.3 x 27.4 x 27.9h) (32.5 x 27.4 x 27.9h) (29.2 x 12.9 x 20.6h) (30.5 x 24.1 x 16.9h) 1.2 oz. (33g) 3 oz. (86g) 0.63 oz. (18g) .46 oz (13g) 1.6 oz. (45g) .99 oz. (28g) 0.9 oz. (26g) .9 oz. (26g) 1 Form A, 1 Form B 2 Form A, Contact 2 Form A 1 Form A through 1 Form A, 1 Form B, 1 Form A 1 Form A, 1 Form A, 2 Form C Arrangements 1 Form C 1 Form C 1 Form C 2 Form C 1 Form C Au flashed AgCd, AgCdO AgCdO Contact AgSnO AgCdO or AuAg, AgCdO, AgSnO AgCdO AgCdO Material Au flashed Coin Ag, AgCu 3 Fine Ag, AgCd, Pd 20A @ 240VAC 30A @ 277VAC Maximum TV-5 @ 120VAC 16A @ 250VAC From 15A @ 150VAC 25A @ 250VAC 30A @ 240VAC 30A @ 240VAC 20A @ 28VDC Contact 8A @ 250VAC for AgCdO 23A @ 277VAC 20A @ 28VDC 20A @ 28VDC (1 pole types) 20A @ 28VDC 10A @ 277VAC 10A @ 600VAC Rating 5A @ 250VAC 10A @ 250 VAC to 2A @ 28VDC 6A @ 277VAC 10A @ 277VAC TV10A @ 120VAC for Pd 98LRA/22FLA @ 98LRA/22FLA @ (2 pole types) 2 HP @ 240VAC 120VAC 2.5 HP @ 240VAC (Form A) 120VAC 1 HP @ 120VAC 2 HP @ 240VAC 2 HP @ 240VAC (Form A) (Form A) 6 7 7 7 7 7 5 7 1 x 10 Ops. 5 x 10 Ops. Expected 1 x 10 Ops. 2.5 x 10 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. Mechanical Life 5 5 5 5 5 5 5 5 1 x 10 1 x 10 Ops. Expected 1 x 10 at 5A 2.5 x 10 1 x 10 1 x 10 1 x 10 1 x 10 4 Electrical 5 x 10 at 8A except 4 5 Life at 2.5 x 10 at TV-5 1.5 x 10 for Rated Load 3mm gap type 12-110VDC Nominal 5-48VDC 3-48VDC 6-48VDC 5-110VDC 12-220VAC 12-110VDC 5-110VDC 24-240VAC Coil Voltage 24-230VAC 1.7W (DC) Nominal 540mW 110mW (3-5A types) 900mW 900mW, 2.0VA 1.0W (DC) 850-930mW 4.0VA (AC) Coil Power 1.8VA (AC) 240mW (15A types) 1.0W PC board Mounting PC board PC board PC board PC board, PC board, PC board, PC board Panel mount Panel mount Options Bracket, Panel mount Panel — Sockets / — — — — — — — Connectors 509 511 Page Number 493 495 497 502 504 506 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xvii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Relays with Forcibly Guided Contacts SCHRACK SCHRACK SCHRACK SCHRACK SCHRACK SCHRACK SR6D/M Series V23047 (SR2M) SR4 SR6-Sensitive SR6Z V23050 (SR6) • 8A rating • 8A rating Features • 6A rating • 8A rating • 8A rating • 8A rating • Forcibly guided • Forcibly guided • Forcibly guided • Forcibly guided • Forcibly guided • Forcibly guided contacts contacts contacts contacts contacts contacts • Four poles • Two poles • Four poles • Six poles • Six poles • Six poles • Compact size • Larger spacings for • Use for emergency • Use for emergency • Sensitive, polarized • DIN mount module increased isolation shutoff; machine, • Use for emergency coil • Use for emergency shutoff; machine, shutoff; machine, • Use for emergency elevator,escalator, elevator,escalator, • Use for emergency shutoff; machine, shutoff; machine, light barrier control elevator,escalator, shutoff; machine, elevator,escalator, light barrier control light barrier control elevator,escalator, elevator,escalator, light barrier control light barrier control light barrier control 2.165" x .65" x .63"h Approximate 1.14" x .50" x 1.0"h 1.57" x .51" x .63"h 2.17" x .65" x .63"h 1.81" x 3.42" x .2.12"h 2.17" x .65" x .63"h (40 x 13 x 16h) (55 x 16.5 x 16h) Dimensions (29 x 12.7 x 25.4h) (55.0 x 16.5 x 16.0h) (55.0 x 16.5 x 16.0h) (46 x 87 x 54h) 1.06 oz. (30g) 0.6 oz. (18g) 0.56 oz. (16g) 1.01 oz. (30g) 3.17 oz. (90g) 1.01 oz. (30g) 2 Form A + 2 Form B, Contact 1 Form A + 1 Form B, 2 Form A + 2 Form B, 4 Form A + 2 Form B, 4 Form A + 2 Form B, 4 Form A + 2 Form B, 3 Form A + 1 Form B 3 Form A + 1 Form B Arrangements 2 Form C 3 Form A + 3 Form B, 3 Form A + 3 Form B, 3 Form A + 3 Form B, 5 Form A + 1 Form B 5 Form A + 1 Form B 5 Form A + 1 Form B AgNi Contact AgNi AgNi AgNi AgNi AgNi Material 8A @ 250VAC Maximum 6A @ 250VAC 8A @ 250VAC 8A @ 250VAC 8A @ 250VAC 8A @ 250VAC Contact Rating 7 7 7 7 7 7 1 x 10 Ops. Expected 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. Mechanical Life — Expected — — — — — Electrical Life at Rated Load 5-110VDC 5-110VDC Nominal 5-110VDC 5-110VDC 5-48VDC 24VDC, 24VAC/VDC, Coil Voltage 115VAC/VDC, 230VAC 800mW 1.2W Nominal 700mW 1.2W 800mW — Coil Power PC board PC board Mounting PC board, PC board PC board PC board Options Socket — — Sockets / Screw terminals, — — — Connectors PC terminals 607 Page Number 603 606 611 613 609 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xviii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Plug-in / Panel Mount Relays P&B P&B OEG SCHRACK P&B P&B SCHRACK Series R10 KHA/KHS PCL(H) PT K10 KUP RM2/3/7 Features • 0 - 7.5A rating • 0 - 5A rating • 3-15A rating • 6 - 12A rating • 15A rating • 10A rating • 10-16A rating • Up to 8 poles • Compact package • Compact package • Low profile • Compact package • Open or enclosed • Mechanical • Highly sensitive • 2PDT & 4PDT • One through four • DPDT, 3PDT & •DPDT • Plain or bracket indicator standard coils available • Smoked dust cover poles 4PDT • Smoked dust cover mount dust covers • Plain or bracket • Many contact • Various mounting • Smoked dust cover • Mechanical • Various mounting • Optional indicator mount dust covers options configurations • AC and DC coils indicator configurations lamp and push-to- • Several socket • Various case, • Indicator lamp • Manual test with • AC and DC coils test button styles terminal and available locking tab option • Several socket mounting styles • Hermetically sealed • AC and DC coils styles case option Approximate 1.17" x .74" x 1.18"h 1.11" x .86" x 1.28"h 1.08 x .83 x 1.32h .886" x 1.1" x 1.14"h 1.11" x .86" x 1.28"h 1.53" x 1.41" x 1.91"h 1.52" x 1.40" x 1.91"h Dimensions (29.6 x 18.7 x 30.2h) (28.2 x 21.8 x 34.9h) (27.5 x 21.2 x 33.6h) (22.5 x 28 x 29h) (28.2 x 21.8 x 34.9h) (38.9 x 35.7 x 48.4h) (38.5 x 35.5 x 48.4h) 1.0 oz. (28g) 1.6 oz. (45g) 1.13 oz (32g) 1.06 oz. (30g) 1.8 oz. (51g) 3 oz. (85g) 3.2 oz. (92g) Contact 1 Form C to 2 Form C, 1 Form A through 2 Form C, 3 Form C 2 Form C 1 Form A to 2 Form C, Arrangements 8 Form C 4 Form C 4 Form C 4 Form C 4 Form C 3 Form C Contact AgCdO, Ag, Ag, AgCdO, AuAgNi, Ag (4 pole only), AgNi 90/10, AgCdO Ag AgCdO Material Au overlay Ag Au overlay Ag, Ag Alloy Au plated AgNi 90/10 AgCdO Au diffused Ag Maximum Dry circuit to 7.5A Dry circuit to 5A 3A to 15A 12A@240VAC (DPDT) 15A @ 30VDC or 5A @ 28VDC or 16A @ 400VAC Contact @ 28VDC or 115VAC @ 28VDC or 240VAC @ 250VAC or 24VDC 8A@240VAC (3PDT) 120VAC 240VAC (RM2/7) Rating 1/8HP @ 110-120VAC 1/10HP @ resistive 6A@240VAC (4PDT) 10A @ 277VAC 10A @ 28VDC or 10A @ 400VAC 1/6HP @ 220-240VAC 120-240VAC 1/3HP @ 120VAC 240VAC (RM3) 1/2HP @ 240VAC 1/3HP @ 120VAC 1/2HP @ 250-600VAC 8 7 8 7 7 7 7 Expected 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 3 x 10 Ops. (DC coil) 1 x 10 Ops. 1 x 10 Ops. 2 x 10 Ops. 7 Mechanical Life 2 x 10 Ops. (AC coil) 4 5 5 5 5 5 5 Expected 2 x 10 1 x 10 1 x 10 1 x 10 1 x 10 1 x 10 1 x 10 5 Electrical to 6 x 10 Life at Rated Load Nominal 3-115VDC 6-110VDC 6-110VDC 6-220VDC 6-110VDC 6-110VDC 6-220VDC Coil Voltage 6-115VAC 6-240VAC 6-240VAC 6-230VAC 6-240VAC 6-240VAC 6-400VAC Nominal 36mW to 1.6W (DC) 0.9W (DC) 0.9 - 1W (DC) 0.75W (DC) 0.9W (DC) 1.2-1.8W (DC) 1.2-1.6W (DC) Coil Power 1.5VA (AC) 1.2VA (AC) 1.4VA (AC) 1VA (AC) 1.2VA (AC) 2.0-2.75VA (AC) 2.3-2.8VA (AC) Mounting Socket, Socket, Socket, Socket, Socket, Socket, Socket, Options Panel mount, Panel mount, Panel mount, PC board Panel mount, Panel mount, Panel mount PC board PC board PC board PC board PC board Sockets / Screw terminal, Screw terminal, Screw terminal, Screw terminal, Screw terminal, Screw terminal, Screw terminal, Connectors Solder terminal, Solder terminal, Solder terminal, Solder terminal, Solder terminal, Solder terminal, Solder terminal, PC terminal PC terminal PC terminal PC terminal PC terminal PC terminal, PC terminal, Quick connect Quick connect terminal terminal Page Number 703 709 713 717 720 723 733 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xix specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Plug-in / Panel Mount Relays P&B P&B P&B P&B SCHRACK P&B P&B Series KUP93 KUEP KUIP KUGP RM5/6 KUMP KRPA/KRP Features • 10A rating • 10-16A rating • 15A rating • 3-10A rating • 10A rating • 10A rating • 10A rating • Designed primarily • Switches DC • 8mm coil-to- • 3mm contact gap • Mechanical • Open or enclosed • Octal-type plug contact spacing indicator standard • Plain or bracket for HVAC industry • Dust cover currents. • 8mm coil-to- contact • Accepted pin • Magnetic blowout • Plain or bracket spacing • Optional push-to- mount dust covers • Optional indicator mount dust covers test button • Optional indicator pattern for HVAC lamp • Plain or bracket • Plain or bracket • Plain dust cover mount dust covers • Several socket mount dust cover • 3mm contact gap lamp and push-to- styles • Plain or bracket test button • Optional indicator • Several socket lamp styles mount dust cover • Several socket • Several socket styles styles Approximate 1.53" x 1.41" x 1.91"h 1.53" x 1.41" x 1.91"h 1.53" x 1.41" x 1.91"h 1.53" x 1.41" x 1.91"h 1.52" x 1.40" x 1.91"h 1.53" x 1.41" x 1.91"h 1.41" x 1.41" x 2.00"h Dimensions (38.9 x 35.7 x 48.4h) (38.5 x 35.5 x 48.4h) (38.9 x 35.7 x 48.4h) (38.9 x 35.7 x 48.4h) (35.7 x 35.7 x 50.8h) (38.9 x 35.7 x 48.4h) (38.9 x 35.7 x 48.4h) 3 oz. (85g) 3 oz. (85g) 3 oz. (85g) 3 oz. (85g) 3.2 oz. (92g) 3 oz. (85g) 3 oz. (85g) Contact 3 Form C 1 Form X, 2 Form A, 1 Form A to 1 Form A, 2 Form A, 2 Form A 1 Form A to 1 Form C to Arrangements 3 Form C 3 Form A 3 Form C 3 Form C 2 Form C 3 Form A, 1 Form X Contact Ag AgCdO Ag, AgCdO AgCdO AgCdO AgCdO Ag Material AgCdO AgCdO Maximum 3A @ 32VDC or 10A @ 150VDC (1X) 5A @ 28VDC or 5A @ 28VDC or 16A @ 400VAC 15A @ 277VAC 5A @ 28VDC or Contact 240VAC (RM5) 10A @ 28VDC or 250VAC 120VAC 5A @ 150VDC (2A) 240VAC Rating 5A @ 28VDC or 3A @ 150VDC (2C) 10A @ 28VDC or 10A @ 28VDC or 10A @ 400VAC 240VAC 10A @ 28VDC or 240VAC (RM6) 1/3HP @ 120VAC 240VAC 240VAC 240VAC 10A @ 28VDC or 1/3HP @ 120VAC 1/3HP @ 120VAC 1/2HP @ 250-600VAC 1/3HP @ 120VAC 1/2HP @ 250-600VAC 240VAC 1/2HP @ 240VAC 1/2HP @ 250-600VAC 7 7 7 7 7 7 7 Expected 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 2 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. Mechanical Life 5 5 5 5 5 5 5 Expected 1 x 10 1 x 10 1 x 10 1 x 10 1 x 10 1 x 10 1 x 10 Electrical Life at Rated Load Nominal 6-110VDC 6-110VDC 6-110VDC 6-110VDC 6-220VDC 6-110VDC 6-110VDC Coil Voltage 6-240VAC 6-400VAC 6-240VAC 6-240VAC 6-240VAC 6-240VAC 6-240VAC Nominal 1.2W (DC) 1.2-1.8W (DC) 1.2W (DC) 1.8W (DC) 1.6W (DC) 1.2W (DC) 1.2W (DC) Coil Power 2.0-2.7VA (AC) 2.8VA (AC) 2.7VA (AC) 2.0-2.7VA (AC) 2.0VA (AC) 2.0-2.7VA (AC) 2.7VA (AC) Mounting Socket, Socket, Socket, Socket Socket Socket, Socket, Options Panel mount, Panel mount, Panel mount, Panel mount Panel mount, PC board PC board PC board PC board Sockets / Screw terminal, Screw terminal, Screw terminal, PC terminal Screw terminal Screw terminal, Screw terminal, Connectors Solder terminal, Solder terminal, Solder terminal, Solder terminal, Solder terminal, PC terminal, PC terminal PC terminal, PC terminal, PC terminal, Quick connect Quick connect Quick connect Quick connect terminal terminal terminal terminal Page Number 731 723 723 723 733 723 737 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xx specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Plug-in / Panel Mount Relays Power Relay SCHRACK SCHRACK P&B P&B P&B SCHRACK P&B Series MT KR–E KA KRP–3H RM8 0419 KUHP Features • 10A rating • 10A rating • 20A rating • 16A rating • 10A rating • 25A rating • 20 - 30A rating • Lockable push-to- • Hermetically sealed • Compact, open- • Available as open • Enclosed • Compatible with • Various mounting steel case for use style relay relay or with dust RAST 5 connector test button • Integral mechanical options • Octal-type plug in hazardous • Ruggedly cover and octal- indicator standard • 3mm contact gap • 3,750Vrms coil-to- locations constructed type plug • 4,000Vrms coil-to- • Optional LED, • Bracket mount case contact breakdown protection and • Octal-type plug • Cost effective • 2,500Vrms coil-to- contact breakdown • Highly efficient for • Designed for timing modules contact breakdown • Mechanical switching light European domestic power loads appliances indicator Approximate 1.40" x 1.40" x 2.24"h 1.44" x 1.66" x 2.12"h 1.92" x 1.47" x 1.38"h 1.53" x 1.41" x 2.28"h 1.52" x 1.40" x 1.91"h 1.85" x .98" x 1.85"h 1.53" x 1.41" x 1.91"h Dimensions (36.6 x 42.2 x 53.8h) (48.8 x 37.3 x 34.9h) (38.9 x 35.7 x 57.9h) (47 x 24 x 47h) (35.5 x 35.5 x 57h) (38.5 x 35.5 x 48.4h) (38.9 x 35.7 x 48.4h) 2.82 oz. (80g) 4.8 oz. (136g) 1.7 oz. (48g) - KA 2 oz. (57g) 3.2 oz. (92g) 3.2 oz. (92g) 3.2 oz. (92g) Contact 2 Form C, 1 Form A to 1 Form A to 1 Form X 2 Form C 2 Form A 1 Form C to Arrangements 3 Form C 3 Form C 3 Form C 2 Form C Contact AgNi 90/10 Ag Ag AgCdO AgCdO AgCdO, AgCdO Material AgCdO AgCdO AgNi Au overlay AgNi 90/10 Maximum 10A @ 250VAC 5A @ 28VDC or 5A @ 120VAC 20A @ 120VAC 25A @ 250VAC 16A @ 250VAC (1C) 30A @ 240VAC Contact 120VAC 10A @ 120VAC 1HP @ 120/240VAC (4A @ 250VAC for 2HP @ 240VAC 25A @ 28VDC Rating bifurcated contacts) 10A @ 28VDC or 6A @ 240VAC 1.5HP @ 120VAC 1HP @ 120VAC 240VAC 1/6HP @ 120VAC 1/2HP @ 240VAC (2C) 20A @ 240VAC 1/4HP @ 120VAC 1/6HP @ 120VAC 1/3HP @ 240VAC or 28VDC 3/4HP @ 120VAC 7 7 6 6 7 7 7 Expected 2 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 2.5 x 10 Ops. 2 x 10 Ops. 2 x 10 Ops. 1 x 10 Ops. Mechanical Life 5 5 5 5 5 4 5 Expected 3 x 10 1 x 10 1 x 10 1 x 10 3 x 10 1 x 10 (AC coil) 1 x 10 Electrical 5 Life at 2.5 x 10 (DC coil) Rated Load Nominal 6-220VDC 6-110VDC 6-110VDC 6-110VDC 12-24VDC 12-24VDC 12-24VDC Coil Voltage 6-240VAC 6-240VAC 6-240VAC 110-400VAC, 50 Hz. 6-230VAC 24-115VAC 24-120VAC Nominal 1.2W (DC) 1.2W (DC) 1.2W (DC) 1.2W (DC) 1.2W (DC) 1.3W (DC) 1.2W (DC) Coil Power 2.0VA (AC) 2.0VA (AC) 2.0VA (AC) 2.0-2.5VA (AC) 2.3VA (AC) 2.8VA (AC) 2.7VA (AC) Mounting Socket Panel mount Socket, Panel mount Socket Panel mount Panel mount Options Panel mount Sockets / Screw terminal — Screw terminal — Screw terminal Screw terminal, — Connectors Solder terminal, PC terminal, Quick connect terminal Page Number 742 737 737 737 733 745 803 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxi specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Power Relays & Definite Purpose Contactors PRODUCTS PRODUCTS PRODUCTS SCHRACK P&B P&B P&B UNLIMITED UNLIMITED UNLIMITED 9400 9100 38 Series RM C/D S86/S87 PM PRD • 3-12FLA rating Features • 20A rating • 10-50A rating • 8-12FLA rating • 35A rating • 30A rating • 25A rating • Used extensively in • Used extensively in • Used extensively in • Enclosed • Economical • 4PDT • High inrush HVAC applications switching in a capacity HVAC applications HVAC applications • Optional push-to- • High dielectric • Double make and • Single and double • Potential motor test button, LED compact package strength • Available with pole models • Choice of two magnetic blowouts double break starting relay indicator and • Screw or quick contacts • Multi-positional • Various mounting protection diode mounting brackets connect terminals • Optional auxiliary mounting switch • Various mounting postions and • Bracket mount case • Dust cover bracket options brackets • 2,500Vrms coil-to- available • Custom-built to contact breakdown customer specs 1.84" x 1.26" x 1.5"h 2.11" x 1.83" x 2.36"h 2.03" x 1.82" x 1.82"h Approximate 1.52" x 1.40" x 1.91"h 1.31" x 2.07" x 2.42"h 3.39" x 2.66" x 2.72"h 3.38" x 2.51" x 2.50"h (53.6 x 46.5 x 60.1h) Dimensions (33.3 x 52.6 x 61.5h) (85.7 x 63.8 x 63.5h) (46.8 x 32.1 x 38.1h) (51.6 x 46.2 x 46.2h) (38.5 x 35.5 x 48.4h) (86.2 x 67.5 x 69.1h) 2.9 oz. (82g) 6.1 oz. (173g) 5.8 oz. (164g) 3.2 oz. (92g) 2.9 oz. (82g) 14 oz. (397g) 10 oz. (284g) 1 Form X, 1 Form Y, 1 Form A through 1 Form B Contact 1 Form X, 1 Form C, 4 Form C 1 Form A to 2 Form C, including Arrangements 2 Form C 2 Form C 1 Form Z, 1 Form C ! Form Z (jumpered 1 Form X) mixed forms Fine Ag (pilot), Ag, AgCdO Contact AgCdO Ag, AgCdO Ag, Fine Ag, Material AgCdO AgCdO AgAlloy AuAlloy (pilot) 12FLA/60LRA @ 12FLA/60LRA @ 35A @ 277VAC, Maximum 30A @ 250VAC 20A @ 277VAC 25A @ 277VAC 50A @ 277VAC 125VAC Contact 1HP @ 125VAC 30A @ 277VAC 125VAC inductive 10A @ 28VDC 8FLA/48LRA @ 6FLA/35LRA @ Rating 2HP @ 250VAC 1HP @ 240VAC 20A @ 125VDC 250/277VAC 1.5HP @ 120VAC 240/277VAC 25A @ 240/277VAC, 25A @ 240/277VAC, 2HP @ 250VAC resistive (Form A) resistive (Form X) 6 6 6 6 5 7 7 1 x 10 Ops. 1 x 10 Ops. 7.5 x 10 Ops. Expected 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 2 x 10 Ops. Mechanical Life 5 4 5 5 4 5 5 1 x 10 1 x 10 2.5 x 10 Expected 4.5 x 10 5 x 10 1 x 10 1 x 10 (inductive load) Electrical (inductive load) 5 5 2.5 x 10 2.5 x 10 Life at (resistive load) Rated Load (resistive load) 12-24VDC 12-24VDC 130-495VAC Nominal 6-220VDC 6-125VDC 6-125VDC 6-110VDC 24-277VAC Coil Voltage 12-240VAC 6-480VAC 6-277VAC 24-400VAC 12-20VAC 3.0W (DC) 5.75W (DC) 5VA Nominal 1.2W (DC) 1.13-4.5W (DC) 4.4W (DC) 2.0W (DC) 9.5VA (AC) Coil Power 4.0VA (AC) 9.8VA (AC) 4.0VA (AC) 2.8VA (AC) 14VA (AC) Panel mount Panel mount Panel mount Mounting Panel mount Panel mount Panel mount Panel mount Options — — — Sockets / — — — — Connectors 814 816 818 Page Number 805 807 809 811 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Power Relays & Definite Purpose Contactors PRODUCTS PRODUCTS PRODUCTS PRODUCTS P&B P&B P&B UNLIMITED UNLIMITED UNLIMITED UNLIMITED Series 96-3100 93-3100 P25 P30/P40 P31/P41 Mod. 2000 98-3100 Features • 25FLA rating • 16 - 40FLA rating • 25-30FLA rating • 20-40FLA rating • 20-40FLA rating • 50-60FLA rating • 30 - 40FLA rating • 1 or 2 pole • 3 pole • Control 3Ş loads • P30 switches 30A • P31 is 3 pole • 1 or 2 pole • 3 pole • Field replaceable • P40 switches 40A • P41 is 4 pole • New design is • Robust design • Arc cover standard • Arc cover standard • Arc cover standard • Convenient contacts • Field replaceable • Universal mounting small, lightweight on 40FLA types, • Optional auxiliary contacts plate • Enclosed case and on 40FLA types, optional on others mounting plate optional on others • Optional auxiliary switch • Optional auxiliary • Various terminal plastic base for • Convenient • Universal options quiet operation • Convenient mounting plate switches switch mounting plate mounting plate • Universal mounting • Design permits • Optional auxiliary plate direct access to switches mounting holes • Manual test button .. .. .. TUV Rheinland TUV Rheinland TUV Rheinland Approximate 2.1" x 3.3" x 2.541"h 2.75" x 3.75" x 3.56"h 2.50" x 3.80" x 3.33"h 2.55" x 3.80" x 3.98"h 2.63" x 3.80" x 2.87"h 2.125" x 3" x 2.125"h 2.375" x 3.75" x 3"h Dimensions (64.8 x 96.5 x 63.5h) (67.3 x 96.5 x 101.1h) (64.8 x 96.5 x 72.9h) (54.0 x 76.2 x 54.0h) (53.3 x 83.8 x 64.5h) (60.3 x 95.2 x 76.2h) (69.9 x 95.2 x 90.5h) 8 oz. (227g) 32 oz. (910g) 14 oz. (397g) 28oz. (794g) 18oz. (510g) 4.9 oz. (140g) 16 oz. (455g) Contact 1 Form X w/ or w/o 3 Form X 3 Form X and 3 Form X to 3 Form X to 1 Form X w/ or w/o 3 Form X Arrangements 2 Form X + 1 Form Y 4 Form X shunt, 2 Form X shunt, 2 Form X 4 Form Y Contact AgCdO AgCdO AgCdO AgCdO AgCdO AgCdO AgCdO Material Maximum 40FLA/240LRA @ 60FLA/360LRA @ 25FLA/100LRA @ (P30) 30FLA/120LRA 40FLA/160LRA @ 30FLA/150LRA @ 40FLA/240LRA @ Contact 600VAC @ 600VAC 600VAC 277VAC 240/277VAC 240/277VAC 240VAC Rating 40FLA/200LRA @ 60FLA/300LRA @ 30A res. @ 600VAC 40A res. @ 600VAC 50A res. @ 600VAC 40A res. @ 277VAC 40FLA/200LRA @ (P40) 40FLA/160LRA 480VAC 480VAC 480VAC 40FLA/160LRA @ 60FLA/240LRA @ @ 600VAC 40FLA/160LRA @ 600VAC 600VAC 600VAC 50A res. @ 600VAC 50A res. @ 600VAC 75A res. @ 600VAC 50A res. @ 600VAC 6 5 5 6 Expected — — 2 x 10 Ops. (DC coil) 2 x 10 Ops. (DC coil) 5 x 10 Ops 5 x 10 Ops. — 6 7 Mechanical Life 5 x 10 Ops. (AC coil) 1 x 10 Ops. (AC coil) 5 5 5 5 Expected — — 5 x 10 2 x 10 2 x 10 2 x 10 — Electrical Life at Rated Load Nominal 24-277VAC 24-480VAC 12-24VDC 21-120VDC 12 & 24VDC 24-277VAC 24-480VAC Coil Voltage 120-240VAC 24-277VAC Nominal 5.25-7.0VA 14.0VA 4.8W (DC) 7.5W (DC) 8W 6VA 5.0VA Coil Power 10VA (AC) 12VA (AC) Mounting Panel mount Panel mount Panel mount Panel mount Panel mount Panel mount Panel mount Options Sockets / — — — — — — — Connectors Page Number 830 834 820 823 826 828 832 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxiii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Power Relays & Definite Purpose Contactors Latching, Impulse, Rotary & Special Application Relays PRODUCTS PRODUCTS PRODUCTS SCHRACK OEG SCHRACK P&B UNLIMITED UNLIMITED UNLIMITED Series 93-3100 96-3186 A-3100 PE (latching) PCKWK RT (latching) KUL Features • 25-40FLA rating • 120FLA rating • 5A rating • 16A rating • 16A rating • 75-90FLA rating • 10A rating • 4 pole • 3 pole • 3 pole • Magentic latching • Magentic latching • Magentic latching • Magentic latching • Arc cover standard • Arc cover standard relay relay relay • Arc cover standard relay on 40FLA types, • Convenient • Convenient • Single coil • Dual coil • Single or dual coil • Single or dual coil optional on others mounting plate mounting plate • Sockets available • Convenient • Optional auxiliary • Optional auxiliary mounting plate switches switches • Optional auxiliary switches Approximate 3.05" x 3.75" x 2.63"h 3.75" x 5.0" x 4.06"h 4.625" x 6.375" x 5.0"h .787" x .394" x .394"h .957" x .457" x 1.05"h 1.14" x .50" x .62"h 1.53" x 1.41" x 2.16"h Dimensions (77.6 x 95.2 x 66.9h) (117.5 x 161.9 x 127h) (20 x 20 x 10h) (24.3 x 11.6 x 26.7h) (29 x 12.7 x 15.7h) (95.2 x 127 x 103h) (38.9 x 35.7 x 54.8h) 24 oz. (683g) 64 oz. (1,820g) 128 oz. (3,640g) .18 oz. (5g) .49 oz. (14g) .46 oz. (13g) 3.4 oz. (96g) Contact 4 Form X 3 Form X 3 Form X 1 Form C 1 Form A 1 Form C, 2 Form C 1 Form C, 2 Form C, Arrangements 3 Form C Contact AgCdO AgCdO AgCdO AgNi 90/10 AgSnO AgNi 90/10 Ag Material AgCdO Maximum 40FLA/240LRA @ 90FLA/540LRA @ 120FLA/720LRA @ 5A @ 250VAC 16A @ 277VAC 16A @ 240VAC 5A @ 28VDC or Contact 240/277VAC 240VAC (1 pole) 240VAC 240VAC Rating 40FLA/200LRA @ 90FLA/450LRA @ 120FLA/600LRA @ 8A @ 240VAC 10A @ 28VDC or 480VAC 480VAC (2 pole) 480VAC 240VAC 40FLA/160LRA @ 90FLA/360LRA @ 120FLA/480LRA @ 1/4HP @ 120VAC 600VAC 600VAC 600VAC 1/3HP @ 250-600VAC 50A res. @ 600VAC 120A res. @ 600VAC 150A res. @ 600VAC 6 6 6 7 Expected — — — 5 x 10 Ops. 5 x 10 Ops. 5 x 10 Ops. (1 pole) 1 x 10 Ops. 6 Mechanical Life 2 x 10 Ops. (2 pole) 5 5 4 5 Expected — — — 1 x 10 1 x 10 1 x 10 (1 pole) 1 x 10 4 Electrical 3 x 10 (2 pole) Life at Rated Load Nominal 24-480VAC 24-480VAC 24-480VAC 32-24VDC 312VDC 5-24VDC 12-48VDC Coil Voltage 24-240VAC Nominal 9.0-9.5VA 27.0VA 40.0-48.0VA 360mW 1,800mW (set) 400mW (1 coil) 1.6W (DC dual coil) Coil Power 800mW (reset) 600mW (2 coil) 1.2W (DC single coil) Mounting Panel mount Panel mount Panel mount PC board PC board PC board Socket Options Sockets / — — — — — — Screw terminal, Connectors Solder terminal, PC terminal, Quick connect terminal Page Number 836 838 840 902 904 906 908 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxiv specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Latching, Impulse, Rotary & Special Application Relays AGASTAT AGASTAT AGASTAT P&B P&B P&B P&B Series KB-KBP S89/S90 MDR 136 GP ML TR Features • 10A rating • 10A rating • 10A rating • 10 - 20A rating • 10A rating • 20A rating • 10A rating • Dual coil, • Low cost, bistable, • Rotary relay • Traffic control (flash • Control relay • Magnetic latching • On- delay timing control relay control relay mechanical latching impulse relay • Withstands high- transfer) relay • Articulated design relay • Optional dust cover impact shock blows • Clear plastic dust produces wide • Articulated design • Articulated design produces wide produces wide • Available as an with plug-in base with no contact cover with 8- contact gap open relay or in a • Up to 4 poles chatter position Jones plug • Plastic dust cover contact gap contact gap • Plastic dust cover • Plastic dust cover clear dust cover • Latching & non- • CALTRANS and • Optional mag. with plug-in base latching types NEMA approved blow-out • Optional mag. • Optional mag. blow-out blow-out • Up to 5 poles • Up to 24 poles • Sockets available • Sockets available • Sockets available • Sockets available Approximate 1.78" x 2.41" x 3.56"h 2.70" x 2.00" x 2.42"h 2.63" x 2.63" x 3.13"h 2.375" x 1.75" x 2.8"h 1.77" x 1.77" x 4.3"h 1.77" x 1.77" x 4.3"h 1.77" x 1.77" x 4.3"h Dimensions (45.0 x 45.0 x 109.0h) (45.0 x 45.0 x 109.0h) (45.2 x 61.1 x 90.4h) (68.6 x 50.8 x 61.5h) (66.7 x 66.7 x 79.5h) (60.3 x 44.4 x 71.1h) (45.0 x 45.0 x 109.0h) 10.8 oz. (306g) 7.8 oz. (241g) 32 oz. (900g) 11 oz. (312g) 10.3 oz. (288g) 10.3 oz. (288g) 10.3 oz. (288g) Contact 2 Form C to 1 Form A to 4 Form C to 2 Form C 4 Form C 4 Form C 4 Form C Arrangements 5 Form C 4 Form C 24 Form C Contact AgCdO Ag Ag AgPd Ag Plated Ag Plated Ag Plated Material AgCdO AgCdO Maximum 10A @ 120VAC (S89) 15A @ 250VAC 10A @ 115VAC 20A Tungsten @ 10A @ 120VAC 10A @ 120VAC 10A @ 120VAC Contact 1/2 HP @ 125VAC 3A @ 28VDC 120VAC Rating (S90) 20A @ 277VAC 800mA @ 125VDC 2 HP @ 250VAC 8 8 5 5 6 8 Expected 5 x 10 Ops. 1 x 10 Ops. — 5 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. Mechanical Life 4 4 5 6 6 6 Expected 5 x 10 5 x 10 — 2.5 x 10 1 x 10 1 x 10 1 x 10 Electrical Life at Rated Load Nominal 12-110VDC 6-24VDC 28-125VDC 120VAC 12-250VDC 12-250VDC 24-215VDC Coil Voltage 24-220VAC 120VAC 24-240VAC 24-240VAC 115-440VAC 24-220VAC Nominal 2.7W (DC) 6.33W (DC) 5.1-21.8W 10VA 6W 6W 6W Coil Power 6VA 6VA 5.3-7.8VA (AC) 9VA (AC) 6VA Mounting Socket Panel mount, Panel mount Socket Socket Socket Socket Options Socket Sockets / Screw terminal, Screw terminal — 8-position Screw terminal Screw terminal Screw terminal Connectors Solder terminal Jones plug Page Number 910 912 914 916 917 917 917 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxv specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Automotive Relays TYCO TYCO TYCO TYCO TYCO TYCO TYCO TYCO ELECTRONICS ELECTRONICS ELECTRONICS ELECTRONICS ELECTRONICS ELECTRONICS ELECTRONICS ELECTRONICS V23086 T72M VKP V2R VFM Series VF4 VF7 VTF •20A rating • 40A rating •20A rating Features • 20A rating •20A rating • 40A rating • 70A rating • 279W rating • Micro-miniature •Miniature PC • PC board relay •Motor reversing •Miniature relay • Plug-in or PC • Plug-in or PC • Turn signal, hazard, board relay • Available open or contact PC board relay for plug-in or PC board mountable board mountable or combination • 60% less volume •Sealed case with sealed case arragement board mounting relay relay versions •105°C Ambient • Various contact •Sealed case than comparable •Plastic enclosure • Various enclosure • 1 Form A contact • Flash rate not relays arrangements •Miniature PC •Various contact options arrangement sensitive to load • Minimum PCB board relay • Sealed case arrangements • Various contact • Optional current real estate •105°C ambient arrangements mounting bracket • Electronic timing • Optional with relay output mounting bracket • Meets applicable U.S. standards .472" x .508" x .39"h .89" x .65" x .67"h .911" x .748" x .715"h 1.46" x .65" x .67"h .610" x .906" x 1.02"h Approximate 1.12" x 1.12" x .987"h 1.04" x 1.04" x .992"h 1.12" x 1.12" x 1.6"h (22.5 x 16.5 x 17h) (23.1 x 19.0 x 18.2h) (37.1 x 16.5 x 17h) Dimensions (12.0 x 12.9 x 9.9h) (15.5 x 23 x 26h) (28.5 x 28.5 x 25.1h) (26.5 x 26.5 x 25.2h) (28.5 x 28.5 x 40.5h) 0.14 oz. (4g) 0.4 oz. (12g) 0.7 oz. (20g) 0.9 oz. (25g) 0.7 oz. (19.8g) 1.1 oz. (31g) 1.1 oz. (31g) 1.3 oz. (37g) 1 Form C 1 Form C 1 Form A, 2 x 1 Form C 1 Form A, Contact 1 Form A, 1 Form A 1 Form A 1 Form C (H-Bridge) Arrangements 1 Form C 1 Form C AgNi 0.15 AgNi 0.15 AgNi 0.15 AgNi 0.15 AgSnO Contact AgSnO AgNi 0.15 PdCu AgSnO PdCu, AgSnO Material AgSnO AgNi 0.15 AgNi 0.15 AgCu AgSnO 20A @ 14VDC 20A @ 14VDC 40A @ 14VDC 20A @ 14VDC 20A @ 14VDC Contact 40A @ 14VDC 70A @ 14VDC 55W to 275W Rating @ 85°C (Lamp) (Form A only, nominal coil voltage) 7 7 7 7 7 7 7 7 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. Expected 1 x 10 Ops. 1 x 10 Ops. 1 x 10 Ops. Mech. Life 5 5 5 5 5 5 5 6 6 1 x 10 1 x 10 1 x 10 1 x 10 1 x 10 Expected 1 x 10 1 x 10 1 x 10 - 3 x 10 Electrical (Load dependent) Life at Rated Load 12VDC 12 & 24VDC 12 & 24VDC 12VDC 12VDC Nominal 12 & 24VDC 12VDC 12VDC Coil Voltage .55W .8W 1.6W .64W 1.6W Nominal 1.6W-1.81W 2.0W 1.6W .91W Coil Power PC board PC board PC board PC board Plug-in Mounting PC board, Plug-in, Bracket Plug-in Options Plug-in, Bracket – — — — PC terminal socket, Sockets / PC terminal socket, Wiring harness style PC terminal socket, Connectors wiring harness wiring harness style connector wiring harness style style connector connector with or connector with or without bracket without bracket 1002 1005 1007 1012 1014 Page Number 1017 1021 1024 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxvi specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Solid State Relays & Input/Output Modules P&B P&B P&B P&B P&B P&B P&B P&B Series SSRT SSR SSRD IDC ODC SSRQ IAC OAC Features • 10 - 25A rating • 25 - 125A rating • 25-40A rating • 20A rating per • 0.05A output • 5A output rating • 0.05A output • 3A output • “Hockey Puck” • “Hockey Puck” per output rating rating output rating • AC output package package • Two independent • Four independent • AC input module module • DC input module • DC output • LED indicator • LED indicator solid state relays • Industry standard module solid state relays • Industry standard • Industry standard • Triac output • Inverse parallel in one “Hockey in one “Hockey 0.6" (15.2mm) 0.6" (15.2mm) 0.6" (15.2mm) • Industry standard • AC & DC input SCR output Puck” package wide package 0.6" (15.2mm) Puck” package wide package wide package • AC & DC input • Inverse parallel • Triac output • Series operation • Series operation • Series operation wide package SCR output compatible • Series operation compatible compatible compatible Approximate 1.75" x 2.25" x .87"h 1.75" x 2.25" x .87"h 1.75" x 2.25" x .89"h 1.7" x .60" x 1.25"h 1.7" x .60" x 1.25"h 1.75" x 2.3" x .85"h 1.7" x .60" x 1.25"h 1.7" x .60" x 1.25"h Dimensions (44.4 x 57.2 x 22h) (44.4 x 57.2 x 22h) (44.4 x 57.2 x 22.6h) (44.4 x 58.4 x 21.6h) (43.2 x 15.2 x 31.8h) (43.2 x 15.2 x 31.8h) (43.2 x 15.2 x 31.8h) (43.2 x 15.2 x 31.8h) 3.5 oz. (98g) 3.5 oz. (98g) 3.5 oz. (98g) 1.48 oz. (42g) 1.48 oz. (42g) 3.5 oz. (98g) 1.48 oz. (42g) 1.48 oz. (42g) Switch 1 Form A 1 Form A (2) x 1 Form A 1 Form A 1 Form A (4) x 1 Form A 1 Form A 1 Form A Arrangement (sinking) (sinking) Coupling Optical Optical Optical Optical Optical Optical Optical Optical Input 3-32VDC 3-32VDC 4-15VDC 3.3-32VDC 5VDC 4-15VDC 18-36VAC/VDC 5VDC 90-280VAC 90-280VAC 90-140VAC/VDC 15VDC 4-32VDC 15VDC 10-60VDC 24VDC 180-280VAC/VDC 24VDC Output Zero Zero, Zero, Zero, Random Zero Random Random Switching Random Random Random Min. Output .1A .05 or .1A .1A .15A >0 .05A >0 .01A Current (model dependent) Max. Output 25A 125A 40A 20A 0.05A 3A to 5A 0.05A 1A @ 250V Current 3A @ 60V Min. Output 24V 24 or 48V 24V 24V >0 24V >0 3V Voltage (model dependent) Max. Output 280V 280 or 660V 280V 280V 30V 280V 30V 60V, Voltage (model dependent) 250V Output Type AC AC AC AC DC AC DC DC Terminals Screw Screw Quick connect Printed circuit Printed circuit Quick connect Printed circuit Printed circuit Mounting Chassis mount Chassis mount Chassis mount Mounting board Mounting board Chassis mount Mounting board Mounting board Page Number 1102 1104 1106 1110 1110 1108 1110 1110 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxvii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Solid State Input/Output Modules Time Delay Relays P&B P&B P&B P&B P&B AGASTAT Series IACM OACM IDCM ODCM Series 3RP1 48K Features • 0.05A output • 5A output rating • 0.05A output • 3A output rating Features • 3A rating • 10A rating rating • Slim line AC output rating • Slim line DC output • Programmable time • Programmable time • Slim line AC input module • Slim line DC input module delay relay delay relay module • Only 0.4" (10.2mm) module • Only 0.4" (10.2mm) • Universal or fixed • Universal input • Only 0.4" (10.2mm) wide package • Only 0.4" (10.2mm) wide package input voltage voltage wide package • Series operation wide package • Series operation • Fits 35 mm DIN • LED status • Series operation compatible • Series operation compatible track indicators compatible compatible • Consult factory for • 1/16 DIN style VDE file enclosure Approximate 1.7" x .4" x 1.0"h 1.7" x .4" x 1.0"h 1.7" x .4" x 1.0"h 1.7" x .4" x 1.0"h Approximate 4.02" x .886" x 3.39"h 1.89" x 1.89" x 2.73"h Dimensions (43.2 x 10.2 x 25.4h) (43.2 x 10.2 x 25.4h) (43.2 x 10.2 x 25.4h) (43.2 x 10.2 x 25.4h) Dimensions (102 x 22.5 x 86h) (48.0 x 48.0 x 69.3h) 0.9 oz. (25.5g) 0.9 oz. (25.5g) 0.9 oz. (25.5g) 0.9 oz. (25.5g) 5.3 oz. (150g) 5.0 oz. (142g) Switch 1 Form A 1 Form A 1 Form A 1 Form A Contact Arrang. 1 Form C, 2 Form C Arrangement (sinking) (sinking) 2 Form C Coupling Optical Optical Optical Optical Contact 3A @ 250VAC 10A @ 30VDC or Rating 120/240VAC Input 18-36VAC/VDC 5VDC 3.3-32VDC 5VDC Mode of Programmable: Programmable 90-140VAC/VDC 15VDC 4-32VDC 15VDC Operation 8 -16 timing functions 8 functions (11-pin) 180-280VAC/VDC 24VDC 10-60VDC 24VDC or 4 functions (8-pin) 3-15VDC 3-15VDC Delay On or Delay On Output Switching Random Zero, Random Random Delay Time 0.05 sec. to 100 hr. 0.1 sec. to 10 hr. Random Minimum >0 .05A >0 .01A Type of Control Rotary switches & Knob & Output Current Potentiometer Adj. Rotary switches Maximum 0.05A 3A to 5A 0.05A 3A Maximum ±1% ±0.5% ± 0.02 sec. Output Current Repeatability Minimum >0 24V >0 3V Precision Tolerance Overall Accuracy Output Voltage ±5% ±1.0% ± 0.02 sec. Maximum 30V 280V 30V 60V Output Voltage Output Type DC AC DC DC Temp. Range -25°C to +60°C -25°C to +60°C Terminals Printed circuit Printed circuit Printed circuit Printed circuit Input 24-240VAC/VDC; 24-240VAC; Voltage 24VAC/VDC. 110VAC; 24-125VDC; 24VAC/VDC. 220VAC 120VAC Mounting Mounting board Mounting board Mounting board Mounting board Mounting DIN Mount Plug-in Page Number 1118 1118 1118 1118 Page Number 1207 1210 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxviii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Time Delay Relays & Modules P&B P&B AGASTAT AGASTAT P&B P&B P&B Series CNT CNS CNM5 SSF SCF CN1 CG Features • 10A rating • 10A rating • 10A rating • 10A rating • 10A rating • 10A rating • 10A rating • Programmable • Programmable • Economical, • Programmable • Programmable • Economical single • Top of the line P&B timer/counter time delay relay programmable time time delay module time delay relay function (on delay) non-programmable • Digital display • Universal input delay relay with replaceable • Slim plug-in time delay relay time delay relays • Universal input voltage • Digital accuracy relay package with • Digital accuracy • Extended timing voltage • 1/16 DIN style • LED shows status • Universal input mating socket • LED shows status ranges • 1/16 DIN style enclosure • 1/16 DIN style voltage • 1/16 DIN style enclosure enclosure enclosure Approximate 1.88" x 1.88" x 2.83"h 1.88" x 1.88" x 2.83"h 1.88" x 1.88" x 2.83"h 3.81" x 2.19" x 2.67"h 2.84" x 1.42" x 3.53"h 1.88" x 1.88" x 2.83"h 2.41" x 1.78" x 2.94"h Dimensions (47.8 x 47.8 x 71.9h) (47.8 x 47.8 x 71.9h) (47.8 x 47.8 x 71.9h) (97 x 56 x 68h) (72 x 36 x 90h) (47.8 x 47.8 x 71.9h) (61.1 x 45.2 x 74.6h) 4.3 oz. (122g) 4.3 oz. (122g) 4.3 oz. (122g) 5.5 oz. (156g) 3.5 oz. (99g) 4.3 oz. (122g) 8 oz. (227g) Contact Arrang. 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C Contact 10A @ 30VDC or 10A @ 30VDC or 10A @ 30VDC or 10A @ 28VDC or 5 or 10A @ 28VDC or 10A @ 30VDC or 10A @ 240VAC Rating 277VAC 277VAC 277VAC 120VAC 120VAC 277VAC Mode of Programmable: Programmable: Programmable: Programmable Programmable On Delay Delay on Operate Operation 10 timing functions 8 functions (11-pin) 5 timing functions 4 functions 4 functions Delay on Release 2 counting functions 4 functions (8-pin) Interval On Delay Time 0.1 sec. to 9,990 hr. 0.1 sec. to 100 min. 0.1 sec. to 9,990 hr. 0.1 sec. to 10 hr. 0.1 sec. to 10 hr. 0.1 sec. to 9,990 hr. 1 min. to 50 min. Type of Control Thumbwheel DIP switches & Thumbwheel Recessed Recessed dials and Thumbwheel Potentiometer Adj. switches Potentiometer Adj. switches & Rotary Potentiometer Adj. Potentiometer Adj. switches switch Maximum ±0.1% ± 0.05 sec. ±0.2% ±0.05% ± 0.04 sec. ±1% ± 0.01 sec. ±1% ± 0.01 sec. ±0.05% ± 0.04 sec. ±0.5% (AC) Repeatability ±0.1% (DC) Precision Tolerance Tolerance Tolerance Overall Accuracy Overall Accuracy Tolerance Tolerance ±0.1% ± 0.05 sec. Min. spec. at min.; ±0.05% ± 0.04 sec. ±3% ± 0.01 sec. ±3% ± 0.01 sec. ±0.05% ± 0.04 sec. +0, -10% at min. +20%, -0 at max. +10%, -0 at max. Temp. Range -10°C to +55°C -10°C to +55°C -10°C to +55°C -30°C to +65°C -30°C to +65°C -10°C to +55°C -10°C to +55°C Input 12VDC 24-240VAC/VDC 120VAC 24-125VDC 12-125VDC 120VAC 12-24VDC Voltage 24-240VAC/VDC 24-240VAC or 24-240VAC 120-240VAC User-selectable Mounting Plug-in Plug-in Plug-in DIN-mount or Plug-in Plug-in Plug-in panel mount Page Number 1211 1213 1215 1217 1218 1219 1220 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxix specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Time Delay Relays & Modules P&B P&B AGASTAT P&B P&B P&B P&B MD0 Series CD CK CB CR CL/CU CH Features • 10A rating • 5A rating • 10A rating • 10A rating • 10A rating • 10A rating • 10A rating • Specification grade • Ideal for many • Broad line • Economical for • Recycle timer allows • Compact package • Wide range of is well-suited for • Subminiature demanding • Wide choice of industrial volume independent control package applications functions applications of ON and OFF many OEM applications applications • On-delay timer • Broad temperature • Extremely versatile • Dependable timing • Various timing delays • Universal input range ranges • Time as low as • Various mounting cycles options voltage 0.1 sec. 1.05" x .85" x 2.75"h Approximate 2.41" x 1.78" x 2.94"h 2.41" x 1.78" x 2.94"h 2.41" x 1.78" x 2.94"h 2.41" x 1.78" x 3.56"h 1.53" x 1.41" x 1.91"h 2.41" x 1.78" x 2.94"h Dimensions (38.9 x 35.7 x 48.4h) (26.7 x 21.6 x 69.8h) (61.1 x 45.2 x 74.6h) (61.1 x 45.2 x 74.6h) (61.1 x 45.2 x 74.6h) (61.1 x 45.2 x 74.6h) (61.1 x 45.2 x 90.4h) 4 oz. (96g) 8 oz. (227g) 6 oz. (170g) 6 oz. (170g) 6 oz. (170g) 3.5 oz. (99g) 6 oz. (170g) 2 Form C, Contact 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C Arrang. 4 Form C 5A @ 30VDC Contact 10A @ 240VAC 10A @ 240VAC 10A @ 240VAC 10A @ 240VAC 10A @ 28VDC 10A @ 240VAC Rating or 240VAC or 240VAC On Delay Mode of Delay on Operate Delay on Operate Delay on Operate Recycle Timer Delay on Operate Delay on Operate Operation Delay on Release Delay on Release Delay on Release Delay on Release Interval On Interval On Interval On Delay on Dropout Delay Time 0.1 sec. to 120 sec. 0.1 sec. to 10 hr. 0.1 sec. to 180 sec. 0.1 sec. to 180 sec. 1 sec. to 180 sec. 0.1 sec. to 100 min. 0.1 sec. to 180 sec. Type of Fixed, Potentiometer Adj. Fixed, Fixed, Fixed, Potentiometer Adj. Potentiometer Adj. Control Potentiometer Adj., Potentiometer Adj., Potentiometer Adj., Potentiometer Adj. Ext. Res. Adj. Ext. Res. Adj. Ext. Res. Adj. Maximum ±3% ±0.5% ±1% ±2% ±2% ±2% ±2% Repeatability Precision Tolerance Overall Accuracy Tolerance Tolerance Tolerance Tolerance Tolerance ±1% ± 0.02 sec. ±5% (fixed only) Min. specified delay Min. specified delay Min. specified delay ±5%(fixed only) ±5% (fixed only) time or less at min,; time or less at min,; time or less at min,; -0, +20% at max. -0, +30% at max. -0, +20% at max. (knob) ±5% (fixed) Temp. Range -10°C to +40°C -25°C to +60°C -40°C to +55°C -10°C to +55°C -10°C to +55°C -10°C to +55°C -10°C to +55°C 12-125VDC Input 12-110VDC 12-24VDC 12-24VDC 24VDC 12-24VDC 24VDC Voltage 24-120VAC 24-240VAC 24-120VAC 24-120VAC 24-240VAC 24-120VAC 120VAC Plug-in Mounting Plug-in Plug-in Plug-in Plug-in Plug-in Plug-in 1233 Page Number 1222 1224 1228 1230 1231 1226 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxx specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Time Delay Relays & Modules AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT Series SCE VTM-1 VTM1 SSC SCB/SCC STA SRC SST • 1A rating • 1A rating Features • 10A rating • 10A rating • 10A rating • 10A rating • 10A rating • 10A rating • Specification • Specification • On Delay timing • Specification • Specification • Specification • Specification • Industrial grade grade module grade grade grade • Wide choice of grade grade • True Off Delay • In-line timing • Solid state output • Choose from 13 • Choose from 13 • Choose from 13 • Repeat cycle functions module switch different timing different timing timer • 9 different timing • 6 different timing different timing ranges • Solid state output • External Res. ranges ranges ranges • Choose from 13 ranges switch adjustable • Premium different timing • LED indicators • Universal input components • Space-saving ranges voltage • Premium quick connect plug-in terminals components Approximate 1.97" x 1.97" x 3.25"h 2.13" x 2.65" x 0.76"h 2.0" x 2.0" x 1.25"h 1.97" x 1.97" x 3.25"h 1.97" x 1.97" x 3.25"h 1.5" x 1.39" x 3.045"h 1.97" x 1.97" x 3.25"h 2.0" x 2.0" x 3.2"h (54 x 67 x 19h) (50.8 x 50.8 x 31.8h) Dimensions (50 x 50 x 83h) (50 x 50 x 83h) (50 x 50 x 83h) (50.8 x 50.8 x 81.3h) (50 x 50 x 83h) (38 x 35 x 77h) 4 oz. (112g) 3 oz. (84g) 4 oz. (112g) 4 oz. (112g) 4 oz. (112g) 4.2 oz. (119g) 5.3 oz. (149g) 4 oz. (112g) Contact. 1 Form C, 1 Form A 1 Form A 2 Form C 2 Form C 2 Form C 2 Form C 2 Form C Arrang. 2 Form C Contact 10A @ 120/240VAC 1A @ 240VAC/VDC 1A @ 240VAC/VDC 10A @ 28VDC or 10A @ 28VDC or 10A @ 28VDC or 10A @ 28VDC or 10A @ 120/240VAC Rating 120VAC 120VAC 120VAC (1 pole) or 120VAC 5A @ 120/240VAC Mode of True Off Delay On Delay On Delay On Delay On Delay On Delay Repeat Cycle On Delay, Off Delay, Operation Off Delay Off Delay Interval, One Shot, Off Delay Interval Interval Interval Repeat Cycle Accum. On Delay 1 sec. to 1,000 sec. 0.5 sec. to 60 min. Delay Time 0.1 sec. to 10 hr. 0.1 sec. to 10 hr. 0.1 sec. to 60 min. 0.1 sec. to 120 min. 0.1 sec. to 10 min. 0.1 sec. to 10 hr. Ext. Res. Adj. Ext. Res. Adj. Type of Fixed, Fixed, Potentiometer Adj. Fixed, Fixed, Potentiometer Adj. Control Potentiometer Adj., Potentiometer Adj., Potentiometer Adj., Potentiometer Adj., Ext. Res. Adj. Ext. Res. Adj. Ext. Res. Adj. ±1% Maximum ±1% ±0.004 sec. ±0.5% ±0.004 sec. ±1% ±0.004 sec. ±1% ±1% ±2% ±0.5% ±0.004 sec. Repeatability Overall Accuracy Overall Accuracy Precision Overall Accuracy Overall Accuracy Overall Accuracy Overall Accuracy Overall Accuracy Overall Accuracy ±5% ±2% ±2% at ±5.25% ±2% ±2% ±2.25% ±5% R = 1 megohm -30°C to +65°C -40°C to +65°C Temp. Range -30°C to +65°C -30°C to +65°C (SCB) -30°C to +65°C -23°C to +54°C -30°C to +65°C -30°C to +65°C Input 24-125VDC 24-240 VAC/VDC 12-120VAC/VDC 12-120VDC 12-120VDC 12-120VDC 12-120VDC 12-120VDC or 12VDC Voltage 24-240VAC 24-240VAC 24-240VAC 24-120VAC 24-120VAC 24-240VAC Mounting Plug-in Panel mount Panel Mount Plug-in Plug-in Plug-in Plug-in Plug-in Page Number 1239 1240 1241 1234 1235 1236 1237 1238 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxxi specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Time Delay Relays & Modules AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT AGASTAT 7000 2100 Series VTMA1 VTMR1 VTM3 VTM4 VTM7 VTM2 Features • 1A rating • 20A rating • 10A rating • 1A rating • 8A rating • 1A rating • 1A rating • 1A rating • Electropneumatic • Miniature • On Delay timing •On Delay timing • Interval timing • One Shot timing • Repeat cycle • Off Delay timing electropneumatic timing module time delay relay module module module module module • Calibrated timing time delay relay • Solid state output •Electromechanical • Solid state output • Solid state output • Independently • Solid state output adjustable on and head • Knob or key adj. switch relay output switch switch switch • Front terminals • Hermetically • Internal •Internal • External Res. • External Res. off times • External Res. • Solid state output • Optional auxiliary sealed, high potentiometer potentiometer adjustable adjustable adjustable switches shock and switch vibration option • External Res. • Many options adjustable 4.52" x 2.57" x 2.83"h 1.52" x 1.52" x 4.26"h Approximate 2.0" x 2.0" x 1.25"h 2.0" x 2.0" x 1.25"h 2.0" x 2.0" x 1.25"h 2.0" x 2.0" x 1.25"h 2.0" x 2.0" x 1.25"h 2.0" x 2.0" x 1.25"h (38.6 x 38.6 x 108.2h) Dimensions (50.8 x 50.8 x 31.8h) (114.8 x 65.3 x 71.9h) (50.8 x 50.8 x 31.8h) (50.8 x 50.8 x 31.8h) (50.8 x 50.8 x 31.8h) (50.8 x 50.8 x 31.8h) (50.8 x 50.8 x 31.8h) 36 oz. (1.02kg) 17 oz. (482g) 4 oz. (112g) 4 oz. (112g) 4 oz. (112g) 4 oz. (112g) 4 oz. (112g) 4 oz. (112g) 2 Form C, 2 Form C Contact. 1 Form A 1 Form C 1 Form A 1 Form A 1 Form A 1 Form A Arrang. 4 Form C 20A @ 120/240VAC 10A @ 120VAC or Contact 1A @ 240VAC/VDC 8A @ 120VAC 1A @ 240VAC/VDC 1A @ 240VAC/VDC 1A @ 240VAC/VDC 1A @ 240VAC/VDC Rating 15A @ 30VDC 30VDC On Delay, On Delay, Mode of On Delay On Delay Interval One Shot Repeat Cycle Off Delay Off Delay Operation Off Delay, (Latching On Delay-Off Delay Interval) Delay Time 0.5 sec. to 60 min. 0.1 sec. to 60 min. 0.03 to 180 sec. 0.5 sec. to 60 min. 15 to 300 sec. 0.5 sec. to 60 min. 0.5 sec. to 60 min. 0.5 sec. to 60 min. Type of Ext. Res. Adj. Knob Knob Potentiometer Adj. Potentiometer Adj. Ext. Res. Adj. Ext. Res. Adj. Ext. Res. Adj. Control ±5-8% (temp. Maximum ±1% ±5-15% (model & ±5% ±5% ±1% ±1% ±1% delay dependent) dependent) Repeatability Precision Overall Accuracy Overall Accuracy Overall Accuracy Overall Accuracy Overall Accuracy Overall Accuracy — — -0%,+10% at Max. -0%,+10% at Max. ±2% at ±2% at ±2% at ±2% at R = 1 megohm -30%,+10% at Min. -30%,+10% at Min. R = 1 megohm R = 1 megohm R = 1 megohm -55°C to +85°C Temp. Range -40°C to +65°C -29°C to +74°C -40°C to +65°C -40°C to +65°C -40°C to +65°C -40°C to +65°C -40°C to +65°C 12-550VAC 120-240VAC Input 24-240VAC/VDC 120VAC 12-120VAC/VDC 12-120VAC/VDC 12-120VAC/VDC 12-120VAC/VDC Voltage 28-550VDC 12-125VDC Panel Mount Panel Mount Mounting Panel Mount Panel Mount Panel Mount Panel Mount Panel Mount Panel Mount 1248 1254 Page Number 1242 1243 1245 1246 1247 1244 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxxii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Sensors, Monitors & Protective Relays P&B AGASTAT AGASTAT AGASTAT P&B KILOVAC KILOVAC Series CS WD25 WD2759 VCA VMA PMA/PMB SDAS-01 Features • Single phase • Single phase • Single phase • Three phase • Single phase • Paralleling (snych • Overvoltage/ voltage sensor check) relay undervoltage undervoltage undervoltage power quality current sensor • Functions as either relay relay monitor • AC current sensor • Checks synchroniza- relay an overvoltage or tion of two circuits • User adjustable • Fixed pick-up and • Fixed pick-up and • Monitors voltage, is offered in both an undervoltage internal internal phase imbalance, overcurrent and for voltage, phase sensing voltages, sensor relationship and number of phases, potentiometer potentiometer phase sequence, undercurrent types • Choice of fixed adjustable drop-out adjustable drop-out phase loss. • Inductive coupling frequency over and under- pick-up and knob • Adjustable setpoints voltage setpoints, • Compact design • Locking • Start-up delay and to power line adjustable drop-out potentiometer locking • Potentiometer • Single dead bus, and time delays. or knob adjustable double dead bus potentiometer adjustable pick-up and drop- options. and generator to out generator types 2.41" x 1.78" x 2.94"h 2.95" x 2.87" x 4.41"h 2.95" x 2.87" x 4.41"h Approximate 2.0" x 2.0" x 1.25"h 1.94" x 1.94" x 3.25"h 3.85" x 2.18" x 5.31"h 1.53" x 1.41" x 2.72"h Dimensions (61.1 x 42.2 x 76.6h) (50.8 x 50.8 x 31.8h) (49 x 49 x 83h) (98 x 55 x 135h) (38.9 x 35.7 x 70.6h) (75 x 73 x 112h) (75 x 73 x 112h) 8 oz. (227g) 14.4 oz. (400g) 14.4 oz. (400g) 3.2 oz. (90.7g) 6 oz. (168g) 24 oz. (625g) 3.2 oz. (90g) Contact / Switch 2 Form C 1 Form C 2 Form C 1 Form A + 1 Form C 2 Form C 2 Form C 1 Form C for undervoltage and 1 Arrangement Form C for overvoltage Contact / Switch 10A @ 28VDC 5A @ 120VAC or 5A @ 120VAC or 7A @ 250VAC 7A @ 250VAC 8A @ 250VAC 2A @ 28VDC or Rating or 120VAC 3A @ 30VDC 3A @ 30VDC 3A @ 30VDC 1A @ 120VAC 30VDC 30VDC Monitor / Sense 16 to 140VAC or VDC 120VAC or 240VAC, 15 to 240VAC or VDC 110 to 600VAC in 1.5 to 15A AC 120 to 480VAC, 120 to 480VAC, Range or in various ranges nominal nominal nominal in various ranges various ranges Threshold 575VAC, Max. 700VAC, Max. 40-400 Hz. 50-400 Hz. Temperature -10°C to +55°C -23°C to +55°C -10°C to +55°C -10°C to +60°C -25°C to +70°C -40°C to +60°C -40°C to +60°C Range Terminals Octal plug Quick Connect Octal plug Screws Quick connect Screws Screws Mounting Options Socket DIN-rail or Panel DIN-rail or Panel Panel Socket DIN-rail, Panel or Socket Machine Tool Rail (with optional adapter plate) Sockets Screw terminal — — — Screw terminal — Screw terminal, Solder terminal, PC terminal, Quick connect terminal Page Number 1302 1308-1309 1308 & 1310 1303 1304 1305 1307 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxxiii specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SELECTOR GUIDE Sensors, Monitors & Protective Relays KILOVAC KILOVAC KILOVAC KILOVAC Series WD32 WD47 WD5051 WD81OU • One and three • Over/ Features • Reverse power • Phase sequence relay relay phase overcurrent underfrequency relay relay • Monitors the • Monitors the direction of power correct phase • Nominal sensing • User selectable current, instanta- nominal frequency, from AC generators rotation and loss of • Adjustable trip set phase. neous over current underfrequency (IOC) setpoint, time (UF) trip set, and time delay • No adjustments or calibration over current (TOC) overfrequency (OF) setpoint and time trip set, UF time necessary. overcurrent time delay and OF time delay are user delay. Need Protective Relays in Steel Cases? configured. Our steel-cased protective relays are not desribed in this technical databook as they do not represent Approximate 2.95" x 2.87" x 4.41"h 2.95" x 2.87" x 4.41"h 2.95" x 2.87" x 4.41"h 2.95" x 2.87" x 4.41"h the most cost-effective solution for many design (75 x 73 x 112h) (75 x 73 x 112h) Dimensions (75 x 73 x 112h) (75 x 73 x 112h) 14.4 oz. (400g) 14.4 oz. (400g) 14.4 oz. (400g) 14.4 oz. (400g) requirements. While the plastic-cased WD... series products are more appropriate for many new industrial applications, we still offer our steel- 1 Form C for IOC 1 Form C for UF Contact / Switch 2 Form C 2 Form C Arrangement and and cased protective relays. For details on KILOVAC 1 Form C for TOC 1 Form C for OF steel-cased protective relays, consult technical support (see inside back cover) or visit our website at www.tycoelectronics.com. Contact / Switch 5A @ 120VAC or 5A @ 120VAC or 5A @ 120VAC or 5A @ 120VAC or 30VDC 30VDC Rating 30VDC 30VDC 1, 3, 6 or 8A 50, 60 or 400 Hz., Monitor / Sense 120 to 480VAC, 120 to 480VAC, Looking for high performance relay Range or nominal nominal 40-400 Hz. nominal 1000 Hz.,Max. Threshold 575VAC, Max. 575VAC, Max. products? 40-400 Hz. 50-400 Hz. 20 to 480VAC, 575VAC, Max. 5A, nominal Our KILOVAC high voltage relays; HARTMAN and -40°C to +60°C -40°C to +60°C Temperature -40°C to +60°C -40°C to +60°C KILOVAC high performance power relays, sensors Range and contactors; and CII high performance signal level relays, timers, sensors and solenoids are not Screws Screws Terminals Screws Screws described in detail in this technical databook. We have included an overview of those product lines in section 14 beginning on page 1401. For detailed information on our broad high performance relay Mounting Options DIN-rail or Panel DIN-rail or Panel DIN-rail or Panel DIN-rail or Panel product line, consult technical support (see inside back cover) or visit our website at www.tycoelectronics.com. Sockets — — — — Page Number 1308 & 1311 1308 & 1312 1308 & 1313 1308 & 1314 Specifications and/or agency recognitions do not necessarily apply to all models within a particular series. When multiple ratings are listed, no individual rating may be exceeded by the combination of others. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: xxxiv specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 CIRCUIT BREAKERS Alphanumeric Index Series Type Page Circuit Breakers ...................... 101-124 1 W6............................. Magnetic Circuit Breaker .................. 119 W9............................. Magnetic Circuit Breaker .................. 119 W23........................... Thermal Circuit Breaker .................... 116 W28........................... Thermal Circuit Breaker .................... 110 Transformers...................................... 5-18 2 W31........................... Thermal Circuit Breaker .................... 116 W33........................... Thermal Circuit Breaker .................... 114 W51........................... Thermal Circuit Breaker .................... 112 Low-signal PC Board Relays .......... 5-18 3 W54........................... Thermal Circuit Breaker .................... 105 W57........................... Thermal Circuit Breaker .................... 103 W58........................... Thermal Circuit Breaker .................... 107 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ................ 22-35 5 NOTE: A question tree that may help you in selecting an appropriate circuit breaker for your application can be found on the next page. Relays with 6 Forcibly-Guided Contacts.............. 36-79 Plug-in/Panel Mount 7 General Purpose Relays................ 80-88 Power Relays & Definite 8 Purpose Contactors...................... 89-131 Latching, Impulse & 9 Rotary Relays ...............................149-154 Automotive Relays ......................141-148 10 Solid State Relays & 11 Input/Output Modules ................195-207 Time Delay Relays & 12 Counters ........................................208-232 Sensors & Monitors ...................233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 101 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 CIRCUIT BREAKERS P&B Circuit Breaker Question Tree This guide helps the user select one or more circuit breaker series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, the user must assume ultimate responsibility for determining the suitability of a breaker for a particular application. What general type of breaker do you need? Thermal Circuit Breaker Magnetic Circuit Breaker • Typically less expensive • Typically more expensive • Trip point varies with ambient temperature • Temperature stable over a wide range • One-pole and two-pole models are offered. • Available with different time delays before tripping • One through four poles. Pushbutton Actuator W23 Series Compact size Push-pull actuation for manual on/off and reset. One pole. Screw terminals. W6 Series Toggle actuator standard, rocker optional. W28 Series (-X version) Quick connect or screw terminals. Push-to-reset actuation. Compact unit can replace slow-blow glass cartridge fuse and holder. One pole. Quick connect terminals. Standard size W54 Series W9 Series Push-to-reset actuation. Toggle actuation. One pole. Quick connect, PC board or screw terminals. Stud terminals. W57 Series Push-to-reset actuation. Compact size. One pole. Quick connect or PC board terminals. W58 Series Push-to-reset actuation. One pole. Quick connect or screw terminals. Toggle Actuator W31 Series Toggle actuation for manual on/off and reset. One pole. Screw terminals. Rocker Actuator W28 Series (-S version) Rocker actuation for manual on/off and reset. Compact unit can replace slow-blow glass cartridge fuse and holder. One pole. Quick connect terminals. W33 Series Rocker actuation for manual on/off and reset. One or two pole. Optional indicator lamp. Quick connect terminals. W51 Series Rocker actuation for manual on/off and reset. One pole. Optional indicator lamp. Quick connect or PC board terminals. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 102 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B W57 series Compact, Push To Reset Only Thermal Circuit Breaker Interrupt Capacity: 1,000 amps in accordance with UL standard 1077. Features Resettable Overload Capacity: Ten times rated current. • New, compact, design. Reset Time: 60 seconds. • 4 to 20 amp ratings. • Cannot be manually tripped. • Button extends for visual trip indication. • Push button to reset breaker. • Numerous mounting and termination options. Typical Resistance vs. Current Rating @ +25°C Current Typical Current Typical Agency Approvals Rating Resistance Rating Resistance in Amps in Ohms in Amps in Ohms W57 series is UL 1077 Recognized as Supplementary Protectors, File E69543, for Canada and the United States. 4.0 0.062 10.0 0.025 5.0 0.050 12.0 0.021 Users should thoroughly review the technical data before selecting a product part 6.0 0.042 15.0 0.017 number. It is recommended that users also sek out the pertinent approvals files of 7.0 0.036 20.0 0.012 the agencies/laboratories and review them to ensure the product meets the 8.0 0.031 requirements for a given application. Electrical Data @ 25°C Calibration: Will continuously carry 100% of rating. Mechanical/Environmental Data May trip between 101% and 134%, but must trip at 135% of rating within one hour at +25°C. Operating Temperature Range: 0°C to +60°C. Dielectric Strength: 1,500VAC (60 seconds). Termination: .250” (6.35mm) quick connects. Insulation Resistance: 100 megohms. Mounting: Various options. See Ordering Information and drawings. Maximum Operating Voltages: 50VDC; 250VAC, 50/60 Hz. Approximate Weight: 0.5 oz. (14.3g). Outline Dimensions Time vs. Current Trip Curve @ +25°C 1000 .465 .889 .457 Overload Trip Times (11.8) (22.6) (11.6) 100% No Trip 900 135% Trip in 1 hour 200% 4.0 - 40.0 Sec. 800 300% 1.2 - 12.0 Sec. .303 1.15 .689 400% 0.6 - 5.0 Sec. (7.7) 700 (29.2) (17.5) 500% 0.4 - 2.8 Sec. 600% 0.3 - 1.8 Sec. 600 SEE MOUNTING 500 SEE TERMINAL DRAWINGS BUSHING AND FOR DETAIL MOUNTING HARDWARE 400 .031 .102 DRAWINGS FOR DETAIL (.8) (2.6) 300 .575 (14.6) 200 135 100 Optional Protective Boot 0 .1 1 10 100 1000 10,000 Silicone rubber boot is bonded to integral alumimum nut. Time In Seconds 1-1423696-5 Black boot for W57 with 3/8”-24 bushing. .63 DIA. Ambient Compensation Table (16.0) 1-1423696-7 Clear boot for W57 with .622 Ambient Rating Correction Factor 3/8”-24 bushing. To use this chart: Divide the breaker (15.8) Temperature rating by the correction factor to in °C 3-6A Models 7-20A Models determine the compensated rating. 10 .80 .80 1-1423696-4 Calculate the overloads in terms of 20 .90 .90 Black boot for W57 with the compensated rating to use the 25 1.00 1.00 M11 X 1.0 bushing. published trip curve. .70 DIA. 30 1.10 1.05 Do not use these devices outside (17.8) 1-1423696-6 40 1.25 1.15 their specified operating temperature Clear boot for W57 with 50 1.61 1.25 ranges. .799 M11 X 1.0 bushing. 60 2.15 1.40 (20.3) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 103 specified. Refer to inside back cover. Load Current As A Percent Of Breaker Rating Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B W 57 -X B 1A4A1 0 -4 1. Designator: W = Circuit breaker 2. Series Number: 57 = Compact, Single Pole, Push-to-Reset, Thermal Model 3. Circuit Function: X = Series Trip 4. Button: A = White, plain, no rate marking C = White with black rate marking (vertical) B = White with red rate marking (vertical) 5. Mounting Bushing: 1 = 9.8mm x 9.6mm long, plastic 6 = 3/8” (one side flat) x 10.5mm) long, metal 2 = 3/8” (one side flat) x 10.5mm) long, plastic 7 = 10.8mm x 12.6mm long, metal 6. Terminals: A = Quick connect .250” (6.35mm) straight 7. Mounting Hardware: 4 = Metal knurled nut/hex nut 5 = Plastic knurled nut 12 = Metal knurled nut 99 = None 8. Mounting Hardware Packaging: A = Assembled to bushing B = Bulk unassembled C = No mounting hardware. 9. Maximum Operating Voltage (AC): 1 = 250VAC 10. Nameplate: 0 = None 11. Specify Amp Rating: 4 5 6 7 8 10 121520 Our authorized distributors are more likely to stock the following items for immediate delivery. W57-XB1A4A10-5 W57-XB1A4A10-15 W57-XB1A7A10-5 W57-XB1A7A10-15 W57-XB1A4A10-10 W57-XB1A4A10-20 W57-XB1A7A10-10 W57-XB1A7A10-20 ORDERING NOTE: Many options illustrated below are not listed in the “Ordering Information” chart above. Options denoted by “Special” or “Special Order” in their descriptions are only offered on a special order basis. Additionally, mounting hardware can be ordered separately. These options are subject to extended leadtimes and significant minimum order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information regarding these options. Mounting Bushings and Recommended Panel Cutouts .346 .346 +.008, -.0 .480 +.008, -.0 .441+.008, -.0 (8.8) .059 (8.8 +.2, -.0) (12.2 +.2, -.0) .059 (11.2+.2, -.0) .059 (1.5) (1.5) (1.5) .394+.008, -.0 .433 +.008, -.0 .386 .413 .382 +.008, -.0 (10.0+.2, -.0) (11.0 +.2, -.0) (9.8) (10.5) (9.7 +.2, -.0) .378 .378 .413 (9.6) (9.6) (10.5) Standard Option 1 – M11 X 1.0 Thread Standard Option 2 & 6 – 3/8” - 24UNF Thread Standard Option 7 – M12 X 1.0 Thread .441+.008, -.0 .630±.005 .382 +.008, -.0 (11.2+.2, -.0) (16±.13) .059 .059 (9.7 +.2, -.0) (1.5) (1.5) .543±.005 .394+.008, -.0 .386 .303 .311 +.008, -.0 (13.8±.13) (10.0+.2, -.0) (9.8) (7.7) (7.9 +.2, -.0) .378 .413 (9.6) (10.5) Special Order – M11 X 1.0 Thread Special Order – Snap In Option Special Order – 3/8” - 24UNF Thread Termination Options .154 ± .01 .098 ± .01 .126 (3.9 ± 0.3) .181 .126 (2.5 ± 0.3) (3.2) .181 (4.6) .071 (1.8) DIA. (3.2) (4.6) Standard Special Special Special Special Special Special .250 QC .250 QC .250 QC .250 QC/PCB .250 QC .250 QC/PCB .250 QC Straight Straight 45° 90° 270° 90 ° 270 ° (small hole) Mounting Hardware Options Optional Nameplates .740 DIA. .740 DIA. .945 DIA. .590 DIA. .551 DIA. .854 DIA. (18.8) (24.0) (15.0) (14.0) (18.8) (21.7) 2 X .059 DIA. (1.5) .102 .079 .126 84¡ .126 56¡ (2.0) (3.2) (3.2) (2.6) .016 (.4) THICK .016 (.4) THICK Standard Standard Special Special Special Special Knurled Nut Hex Nut Integrated Integrated Knurled Nut Embossed Silver Printing Knurled Nut with Small Holes Aluminum On Black Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 104 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B W54 series Push To Reset Only Thermal Circuit Breaker Interrupt Capacity: 1,000 amps in accordance with UL standard 1077. Features Resettable Overload Capacity: Ten times rated current. • New design. Reset Time: 60 seconds. • 5 to 40 amp ratings. (35A and 40A models will not be submitted for UL). • Cannot be manually tripped. • Button extends for visual trip indication. • Push button to reset breaker. Typical Resistance vs. Current Rating @25°C • Numerous mounting and termination options. Current Typical Current Typical Rating Resistance Rating Resistance in Amps in Ohms in Amps in Ohms Agency Approvals 5.0 0.050 15.0 0.017 W54 series (except 35A and 40A models) is UL 1077 Recognized as 6.0 0.042 20.0 0.012 Supplementary Protectors, File E69543, for Canada and the United 7.0 0.036 25.0 0.010 States. 8.0 0.031 30.0 0.008 10.0 0.025 35.0 0.007 Users should thoroughly review the technical data before selecting a product part 12.0 0.021 40.0 0.006 number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Electrical Data @ 25°C Calibration: Will continuously carry 100% of rating. Mechanical/Environmental Data May trip between 101% and 134%, but must trip at 135% of Operating Temperature Range: 0°C to +60°C. rating within one hour at +25°C. Termination: .250” (6.35mm) quick connects or #8-32 screws. Dielectric Strength: 1,500VAC (60 seconds). Mounting: Various options. See Ordering Information and drawings. Insulation Resistance: 100 megohms. Approximate Weight: 0.9 oz. (25.0g). Maximum Operating Voltages: 50VDC; 250VAC . Time vs. Current Trip Curve @ +25°C Outline Dimensions 1000 Overload Trip Times .118 DIA .465 1.22 .638 (3.0) (11.8) (31.0) (16.2) 100% No Trip 900 135% Trip in 1 hour 200% 5.0 - 30.0 Sec. 800 300% 1.8 - 7.6 Sec. 400% 1.0 - 4.5 Sec. .303 700 .846 1.378 500% 0.6 - 3.0 Sec. (7.7) (35.0) (21.5) 600% 0.4 - 2.2 Sec. 600 500 SEE MOUNTING SEE TERMINAL DRAWINGS BUSHING AND FOR DETAIL 400 MOUNTING HARDWARE .031 .102 DRAWINGS FOR DETAIL (.8) (2.6) 300 .575 200 (14.6) 135 100 0 .1 1 10 100 1000 10,000 Optional Protective Boot Time In Seconds Silicone rubber boot is bonded to integral alumimum nut. 1-1423696-5 Black boot for W54 with 3/8”-24 bushing. .63 DIA. Ambient Compensation Table (16.0) 1-1423696-7 Ambient Rating Correction Factor Clear boot for W54 with .622 To use this chart: Divide the breaker Temperature 3/8”-24 bushing. (15.8) rating by the correction factor to in °C 4-8A Models 9-30A Models determine the compensated rating. 10 .90 .80 Calculate the overloads in terms of 1-1423696-4 20 .98 .90 the compensated rating to use the Black boot for W54 with 25 1.00 1.00 published trip curve. M11 X 1.0 bushing. 30 1.10 1.05 Do not use these devices outside .70 DIA. 40 1.25 1.15 (17.8) their specified operating temperature 1-1423696-6 50 1.61 1.31 ranges. Clear boot for W54 with 60 2.00 1.55 .799 M11 X 1.0 bushing. (20.3) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 105 specified. Refer to inside back cover. Load Current As A Percent Of Breaker Rating Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B W 54 -X B 1A4A1 0 -5 1. Designator: W = Circuit breaker 2. Series Number: 54 = Single Pole, Push-to-Reset, Thermal Model 3. Circuit Function: X = Series Trip 4. Button: A = White, plain, no rate marking C = White with black rate marking (vertical) B = White with red rate marking (vertical) 5. Mounting Bushing: 1 = 9.8mm x 12.6mm long, metal 4 = 10.8mm x 12.6mm long, metal 2 = 3/8” (one side flat) x 10mm) long, metal 7 = 3/8” (one side flat) x 10mm) long, plastic 6. Terminals: A = Quick connect .250” (6.35mm) straight C = #8-32 screw 90° (screws installed) 7. Mounting Hardware: 4 = Metal knurled nut/hex nut 5 = Plastic knurled nut 12 = Metal knurled nut 99 = None 8. Mounting Hardware Packaging: A = Assembled to bushing B = Bulk unassembled C = No mounting hardware 9. Maximum AC Operating Voltage: 1 = 250VAC 10. Nameplate: 0 = None 11. Specify Amp Rating: 5 7 10 15 25 35* 6 8 12 20 30 40* *Not UL Our authorized distributors are more likely to stock the following items for immediate delivery. W54-XB1A4A10-5 W54-XB1A4A10-20 W54-XB1A4A10-10 W54-XB1A4A10-25 W54-XB1A4A10-15 W54-XB1A4A10-30 Mounting Bushings and Recommended Panel Cutouts .346 .441+.008, -.0 .346 +.008, -.0 (8.8) .630±.005 (11.2+.2, -.0) (8.8 +.2, -.0) (16±.13) .059 .059 (1.5) (1.5) .543±.005 .382 +.008, -.0 .394+.008, -.0 .386 (13.8±.13) (9.7 +.2, -.0) (10.0+.2, -.0) (9.8) .496 .394 (12.6) (10.0) Standard Option 1 – M11 X 1.0 Thread Standard Option 2 & 7 – 3/8” - 24UNF Thread Special Order – Snap In Option .480 +.008, -.0 .441+.008, -.0 (12.2 +.2, -.0) (11.2+.2, -.0) .157 .157 (4.0) (4.0) .394+.008, -.0 .413 .433 +.008, -.0 .386 (10.0+.2, -.0) (10.5) (11.0 +.2, -.0) (9.8) .496 .496 (12.6) (12.6) Special Order – M11 X 1.0 Thread Standard Option 4 – M12 X 1.0 Thread Termination Options Optional Nameplates .945 DIA. .854 DIA. (24.0) (21.7) .098 ± .01 .181 (2.5 ± 0.3) .181 (4.6) (4.6) Standard Special Special Special Special Standard .016 (.4) THICK .016 (.4) THICK .250 QC .250 QC .250 QC .250 QC/PCB #8-32 Screw #8-32 Screw Straight 45° 90° 270° 45° 90° Special Special Embossed Silver Printing Aluminum On Black Mounting Hardware Options .740 DIA. .740 DIA. ORDERING NOTE: .590 DIA. .551 DIA. (18.8) (15.0) (14.0) (18.8) Many options illustrated here are not listed in the “Ordering 2 X .059 DIA. Information” chart above. Options denoted by “Special” or “Special (1.5) Order” in their descriptions are only offered on a special order basis. Additionally, mounting hardware can be ordered separately. These options are subject to extended leadtimes and significant minimum .102 .079 .126 84¡ .126 56¡ (2.0) (3.2) (3.2) (2.6) order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information Standard Standard Special Special regarding these options. Knurled Nut Hex Nut Integrated Integrated Knurled Nut Knurled Nut with Small Holes Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 106 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B W58 series Push To Reset Only Thermal Circuit Breaker Features Maximum Resistance vs. Current Rating @ +25°C • 0.5 amp to 30 amp ratings. Current Maximum Current Maximum • Cannot be manually tripped. Rating Resistance Rating Resistance • Button extends for visual trip indication. in Amps in Ohms in Amps in Ohms • Push button to reset breaker. 0.5 5.0 8 0.020 • Termination is screw or .250” QC. 1 1.35 9 0.020 2 0.32 10 0.014 3 0.18 12 0.010 4 0.10 15 0.010 Agency Approvals 5 0.026 20 0.005 W58 Series is UL 1077 Recognized as Supplementary Protectors, File 6 0.026 25 0.006 E69543, and CSA Certified as Appliance Component Protectors, File 7 0.020 30* 0.004 LR15734. *No UL/CSA Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Electrical Data @ +25°C Mechanical/Environmental Data Calibration: Breaker will continuously carry 100% of rated load. It may trip Shock: Withstands to 10g. between 101% and 145% of rated load, but must trip at Endurance Cycling: Over 1,000 cycles at 200% of rated load. 145% at 25°C. Vibration: Withstands to 10g at 10-55 Hz. Dielectric Strength: Over 1,500 volts RMS. Weight: Less than 1 1/2 oz. (42.5g). Maximum Operating Voltages: 50VDC; 250VAC. Interrupt Capacity: 2,000 amps at 50VDC (0.5 - 30 amp models). 1,000 amps at 250VAC (0.5 - 30 amp models). Note: 30 0amp model not UL or CSA. Resettable Overload Capacity: Ten times rated current. Time vs. Current Trip Curve @ +25°C Ambient Compensation Chart 1000 1.40 (A) All 5-30 Amp Models (B) All 1-4 Amp Models Overload Trip Times Overload Trip Times 900 1.30 100% No Trip 100% No Trip (A) 145% Trip in 1 hour 145% Trip in 1 hour 1.20 800 200% 6.0-30 Sec. 200% 10-45 Sec. 400% 1.6-4.5 Sec. 400% 3.0-14.0 Sec. 1.10 600% 0.60-1.7 Sec. 600% 1.4-7.0 Sec. 700 800% 0.25-0.90 Sec. 800% 0.75-4.3 Sec. 1000% 0.15-0.65 Sec. 1000% 0.50-3.4 Sec. 1.00 600 0.90 500 0.80 (B) 400 0.70 300 0.60 –20 –10 0 102030405060 200 Ambient Temperature In Degrees Centigrade (°C) 100 0 To use this chart: Read up from the ambient .1 1 10 100 1000 temperature to the curve, and across to find a correction Time In Seconds factor. Multiply the breaker rating by the correction factor to determine the compensated rating. Calculate the overloads in terms of the compensated rating to use the published trip curve. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 107 specified. Refer to inside back cover. Load Current As A Percent Of Breaker Rating Correction Factor Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B W 58 -X B 1A4A -5 1. Designator: W = Circuit breaker 2. Series Number: 58 = Single Pole, Push-to-Reset 3. Circuit Function: X = Series Trip 4. Button: A = White, plain, no rate marking, no trip band E = White with red rate marking no trip band B = White with red rate marking, red trip band F = White with black rate marking, no trip band C = White with black rate marking, red trip band 5. Mounting Bushing: 1 = 7/16” x .500” (12.70mm) long 4 = 15/32” x .300” (7.62mm) long, black 6 = 3/8” x .465” (11.81mm) long, round 6. Terminals: A = Quick connect .250” (6.35mm) straight C = 6/32 screw 90° (screws installed) D = 6/32 screw 90° (screws bulk packed) 7. Mounting Hardware: 4 = Knurled nut/hex nut 15 = Two hex nuts/lock washer 6 = Knurled nut/hex nut/lock washer 99 = No mtg. hardware supplied (Use C, Step #8) 12 = Knurled nut/lock washer Note: For other hardware combinations, order separately. See mounting hardware Ordering Information table. 8. Mounting Hardware Packaging: A = Assembled to bushing B = Bulk unassembled C = No mounting hardware 9. Specify Amp Rating: 0.5 3 6 9 15 30* 1 4710 20 2 5812 25 *Not UL or CSA Stock Items – Authorized distributors are more likely to stock the following items. W58-XB1A4A-1 W58-XB1A4A-6 W58-XB1A4A-15 W58-XC4C12A-2 W58-XC4C12A-15 W58-XB1A4A-2 W58-XB1A4A-7 W58-XB1A4A-20 W58-XC4C12A-3 W58-XC4C12A-20 W58-XB1A4A-3 W58-XB1A4A-8 W58-XB1A4A-25 W58-XC4C12A-5 W58-XC4C12A-25 W58-XB1A4A-4 W58-XB1A4A-10 W58-XB1A4A-30 W58-XC4C12A-7 W58-XC4C12A-30 W58-XB1A4A-5 W58-XB1A4A-12 W58-XC4C12A-1 W58-XC4C12A-10 Outline Dimensions Terminal Options .250 (6.35) x .032 (.81) .050 MAX. QUICK CONNECT TERMINALS .440 1.375 (1.27) (11.18) (34.93) CLOSED POSITION .415 (10.54) CODES 1 & 4 .425 .425 (10.80) .850 .312±.005 1.375 1.375 (10.80) 15 (7.92±.13) (21.59) (34.93) (34.93) .250 .850 (6.35) (21.59) .440 CODE 6 A (11.18) SEE TERMINAL DRAWINGS SEE MOUNTING FOR DETAIL BUSHING AND .187 MOUNTING HARDWARE DRAWINGS FOR DETAIL (4.75) .281 MAX. (7.14) OPEN POSITION .660 .312 TYP. (16.76) (7.92) BUTTON .156 C & D .85 (3.96) (21.6) #6-32 SCREW & LOCK WASHER ASSEMBLY Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com 108 reference purposes only. (millimeters) unless otherwise subject to change. Technical support: specified. Refer to inside back cover. R P E R K E A S E S R T B Catalog 1308242 Issued 3-03 P&B Mounting Hardware Pal Nut Disc Hex Nut Knurled Nut Lockwasher ALTERNATE TEETH TWISTED IN OPPOSITE DIRECTIONS BLACK ETCHED LETTERS .078 (1.98) HIGH, BOLD FACE STRAIGHT KNURL 24 PITCH A A A FLAT B .937 AB .013 (23.80) (.33) B B Mounting Bushing Mounting Hardware Dimensions Type 1 Dim. Hex. Knurled L/W Pal Recommended Cutout 3/8” .556 .562 .562 .562 .440 - .450 DIA. A. 7/16” .625 .625 .540 .625 (17.3 - 17.7) 15/32” .556 .625 .600 .625 3/8” .085 .078 .018 .140 7/16-28 THREAD B. 7/16” .078 .125 .022 .111 (SILVER) 15/32” .078 .125 .018 .090 Type 4 .300 Mounting Hardware Ordering Information (7.62) Mounting Push to .470 - .480 DIA. (18.5 - 18.9) Bushing Knurl Hex Pal Reset Code Nut Nut Nut Washer Disc 1 55-010A 55-011A 16S086B 88-021B 33-012A 15/32-32 THREAD 4 • 55-001B 16S086C 88-002A 33-012C (BLACK) 6 55-008A 55-001D 16S086A 88-006K 33-012B Type 6 • 55-010B (silver) 55-010E (black) .465 (11.81) .370 - .380 DIA. (15.0 - 15.3) 3/8-24 THREAD (SILVER) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 109 specified. Refer to inside back cover. O T I R U E C S R E I T C Catalog 1308242 Issued 3-03 P&B W28 series Switchable or Push to Reset Fuseholder-Type Thermal Circuit Breaker Note: VDE, Demko, Semko not available on 16A and 20A W28 only. Switch/Breaker Push-to-Reset Breaker Features Resettable Overload Capacity: Six times rated current for 0.25 through 2 amp models. Ten times rated current for • Switchable version combines on-off switch and circuit protection in a 3 through 20 amp models. single unit. Reset Time: 180 seconds max. for 0.25 through 2 amp models. 10 to 60 • Approved to many international standards (push to reset type). • Replaces slow blow glass cartridge fuse. seconds for 3 through 20 amp models. • Labor-saving snap-in mounting. • Button extends for visual trip indication on push to reset model. • Rocker on switchable model moves to “overload” position upon trip. Agency Approvals Typical Resistance vs. Current Rating @ +25°C W28 series is UL 1077 Recognized as Supplementary Protectors, File Current Typical Current Typical E69543, and CSA Certified as Appliance Component Protectors, File Rating Resistance Rating Resistance LR15734. W28 breakers have been issued Certificate of Suitability in Amps in Ohms in Amps in Ohms CS2190N as supplementary Equipment Protectors by the Energy 0.25 14.0 8.0 0.016 Authority of New South Wales, Australia. W28 breakers are also 0.50 3.55 9.0 0.014 DEMKO (Denmark) and SEV (Switzerland) approved. VDE approved 0.75 2.0 10.0 0.011 for use in office equipment and provides 8mm isolation. 16 amp and 1.0 0.89 11.0 0.01 20 amp models do not have VDE, DEMKO and SEV approvals at 2.0 0.17 12.0 0.009 present. W28-S is UL 1077 Recognized, and CSA Certified for models 3.0 0.069 13.0 0.009 up to and including 15 amps. 4.0 0.043 14.0 0.007 Users should thoroughly review the technical data before selecting a product part 5.0 0.030 15.0 0.007 number. It is recommended that users also seek out the pertinent approvals files of 6.0 0.026 16.0 0.007 the agencies/laboratories and review them to ensure the product meets the 7.0 0.017 20.0 0.006 requirements for a given application. Electrical Data @ 25°C Mechanical/Environmental Data Calibration: Will continuously carry 100% of rating. Endurance Cycling(switchable type): Typically 30,000 operations at 3-20 amp models – may trip between 101% and 134%, but 100% of rating. must trip at 135% of rating within one hour at +25°C. Termination: .250” (6.35mm) quick connects. Soldering to terminals is 0.25-2 amp models – may trip between 101% and 174%, but not recommended. must trip at 175% of rating within one hour at +25°C. Mounting: Snaps into panel from front. See Recommended Panel Cutouts. Dielectric Strength: Over 1,500 volts RMS. Approximate Weight: 0.35 oz. (10g). Maximum Operating Voltages: 32VDC; 250VAC, 50/60 Hz. Interrupt Capacity: 1,000 amps at 250VAC, 50/60 Hz. and 32VDC in accordance with UL standard 1077. Time vs. Current Trip Curve @ +25°C Ambient Compensation Chart 1.40 1000 (A) All 3-20 Amp Models (B) All 0.25-2 Amp Models 1.30 Overload Trip Times Overload Trip Times 900 100% No Trip 100% No Trip 1.20 135% Trip in 1 hour 175% Trip in 1 hour 800 200% 2.2-15.0 Sec. 200% 4.5-28.0 Sec. 1.10 400% 0.55-1.8 Sec. 400% 1.0-6.5 Sec. 600% 0.27-0.7 Sec. 600% 0.4-4.0 Sec. 700 800% 0.17-0.45 Sec. 1.00 (A) 1000% 0.12-0.3 Sec. 600 0.90 500 0.80 0.70 400 (B) 0.60 300 –20 –10 0 102030405060 Ambient Temperature In Degrees Centigrade (°C) 200 175 135 To use this chart: Read up from the ambient 100 temperature to the curve, and across to find a correction factor. Multiply the breaker rating by the 0 correction factor to determine the compensated .1 1 10 100 1000 rating. Calculate the overloads in terms of the compensated rating to use the published trip curve. Time In Seconds Do not use these devices outside their specified operating temperature ranges. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 110 specified. Refer to inside back cover. Load Current As A Percent Of Breaker Rating Correction Factor Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B W28 -X Q 1 A -5 1. Designator: W = Circuit breaker 2. Series Number: 28 = Single Pole Fuseholder Type 3. Circuit Function: X = Series Trip, Push-to-Reset Button S = Series Trip, Switchable Rocker 4. Terminal Type and Mounting: Q = .250” (6.35mm) Quick Connect will mount in .032”-.062” (.813mm – 1.574mm) thick panel. T = .250” (6.35mm) Quick Connect will mount in .075”-.105” (1.905mm – 2.667mm) thick panel. For panel thicknesses other than above, order “Q” type and 55-025B Internal Tooth Push-On Lockwasher. 5. Bezel Color: 1 = Black with White Rate Marking † 11 = Black with No Rate Marking 2 = Red with Black Rate Marking † 21 = Red with No Rate Marking † Not available with Circuit Function “S” . B = Black with White “Reset” Marked On Bezel (No Rate Marking) † Consult factory for other bezel colors. 6. Button Color: A = Black B = Red Consult factory for other button colors. 7. Amp Rating: 0.25† 1† 4 7 10 13 16 0.50† 2† 5 8 11 14 20* † Not available with Circuit Function “S” . 0.75† 3 6 9 12 15 * Contact factory for availability. Stock Items – Authorized distributors are more likely to stock the following items. W28-XQ1A-0.25 W28-XQ1A-2 W28-XQ1A-6 W28-XQ1A-12 W28-XT1A-12 W28-XQ1A-0.50 W28-XQ1A-3 W28-XQ1A-7 W28-XQ1A-15 W28-XQ1A-0.75 W28-XQ1A-4 W28-XQ1A-8 W28-XQ1A-20 W28-XQ1A-1 W28-XQ1A-5 W28-XQ1A-10 W28-XT1A-10 Outline Dimensions Push-to-Reset Type Switchable Type 1.535 MAX. .19 .76 MAX. (38.99) (4.83) (19.31) ROCKER POSITION DURING OVERLOAD I I .54 MAX. (TRIP) CONDITION .76 MAX. (13.716) (19.31) O O .325 MAX. (8.26) .37 AMP RATING AMP RATING (9.4) .625 MAX. (15.875) .250 x .032 (6.35 x .813) QUICK CONNECT TERMINALS Recommended Panel Cutouts .570-.575 .540-.550 (14.478-14.605) (13.716-13.970) .970 DIA. (25.64) .625-.635 .625-.635 .625-.635 (15.875-16.129) (15.875-16.129) (15.875-16.129) 55-025B INTERNAL TOOTH PUSH-ON LOCKWASHER Note: 1. Soldering to terminals is not recommended. For panels greater than .105” (2.67) thickness 2. Recommended Panel Thickness: Style Q: .032” - .062” (.813 mm - 1.574 mm) Style T: .075” - .105” (1.905 mm - 2.667 mm) 3. Internal tooth push-on washer available for panel thickness not covered above. Part No. 55-025B. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 111 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B W51 series Rocker-Actuated Thermal Circuit Breaker/Power Switch With Optional Indicator Lamp Interrupt Capacity: 1,000 amps in accordance with UL standard 1077. Features Resettable Overload Capacity: Ten times rated current. • Compact, trip-free, rocker-actuated design. Switch Endurance Cycling: Typically 6,000 operations at 100% of rating. • 5 to 20 amp ratings. Reset Time: 60 seconds. • Provides circuit protection and power switching in a single unit. • Available with optional indicator lamp. • Snaps into the same cutout as many common power switches. • Various color, marking and termination options. Typical Resistance vs. Current Rating @ +25°C Agency Approvals Current Typical Current Typical Rating Resistance Rating Resistance W51 series is UL 1077 Recognized as Supplementary Protectors, File in Amps in Ohms in Amps in Ohms E69543, for Canada and the United States. 5.0 0.050 10.0 0.025 Users should thoroughly review the technical data before selecting a product part 6.0 0.042 15.0 0.017 number. It is recommended that users also seek out the pertinent approvals files of 7.0 0.036 20.0 0.0125 the agencies/laboratories and review them to ensure the product meets the 8.0 0.031 requirements for a given application. Electrical Data @ 25°C Mechanical/Environmental Data Calibration: Will continuously carry 100% of rating. May trip between 101% and 134%, but must trip at 135% of Operating Temperature Range: 0°C to +60°C. rating within one hour at +25°C. Termination: .250” (6.35mm) quick connects, solder terminals or right Dielectric Strength: 1,500VAC (60 seconds). angle PC terminals. Insulation Resistance: 100 megohms. Mounting: Snaps into 1.122 x .531 (28.5 x 13.5) panel cutout. Maximum Operating Voltages: 50VDC; 125 or 250VAC, 50/60 Hz. (model Approximate Weight: 0.37 oz. (10.5g). dependent). Time vs. Current Trip Curve @ +25°C Outline Dimensions 1000 Overload Trip Times .598 1.260 (15.2) .118 (32.0) 100% No Trip 900 (3.0) .394 135% Trip in 1 hour .827 (10.0) (21.0) 200% 4.0 - 40.0 Sec. 800 300% 1.2 - 12.0 Sec. 400% 0.6 - 5.0 Sec. 700 500% 0.4 - 2.8 Sec. 600% 0.3 - 1.8 Sec. .079 600 .858 (2.0) (21.8) 500 1.232 (31.3) 400 300 .315 (8.0) .354 200 (9.0) .25 .031 135 (6.35) TYP. (0.8) 100 .394 TYP. 1.098 (10.0) (27.9) 0 .504 .1 1 10 100 1000 10,000 1.311 (12.8) (33.3) Time In Seconds Ambient Compensation Table Recommended Panel Cutout Ambient Rating Correction Factor To use this chart: Divide the breaker Temperature SUGGESTED .531 rating by the correction factor to in °C 5-6A Models 7-20A Models PANEL CUTOUT (13.5) determine the compensated rating. 10 .80 .80 Calculate the overloads in terms of 20 .90 .90 the compensated rating to use the 1.122 25 1.00 1.00 (28.5) published trip curve. 30 1.10 1.05 Do not use these devices outside 40 1.25 1.15 their specified operating temperature Panel Thickness 50 1.61 1.25 ranges. W51 series circuit breakers accommodate panel thicknesses 60 2.15 1.40 from 0.030 in. to 0.118 in. (0.75 mm - 3.0 mm). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 112 specified. Refer to inside back cover. Load Current As A Percent Of Breaker Rating Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B W 51 -A 121 B 1 -5 1. Designator: W = Circuit breaker 2. Series Number: 51 = Switchable, Single Pole, Rocker-Actuated Thermal Model 3. Terminals: A = Quick connect .250” (6.35mm) straight C = Printed Circuit - right angle 4. Breaker Style & Base Color: 1 = Angular button design (see drawing below), black base color B = Countoured button design (see drawing below), black base color 5. Rocker Color: 1 = Amber (translucent) 2 = Red (translucent) 3 = Green (translucent) 4 = White (opaque - for use on non-illuminated models) 5 = Black (opaque - for use on non-illuminated models) 6 = Red (opaque - for use on non-illuminated models) 7 = Gray (opaque - for use on non-illuminated models) 8 = Black (opaque) with red (translucent) indicator (only available on model with contoured button) 9 = Black (opaque) with green (translucent) indicator (only available on model with contoured button) 6. Maximum Operating Voltage (AC): 1 = 125VAC 2 = 250VAC 7. Light: A = Non-illuminated B = Illuminated 8. Marking option: 0 = No marking 2 = RESET/OFF molded (only available on model with contoured button) 1 = RESET/OFF printed 9. Specify Amp Rating: 5 678 10 15 20 Our authorized distributors are more likely to stock the following items for immediate delivery. W51-A121B1-5 W51-A121B1-15 W51-A122B1-5 W51-A122B1-15 W51-A152A1-5 W51-A152A1-15 W51-A121B1-10 W51-A121B1-20 W51-A122B1-10 W51-A122B1-20 W51-A152A1-10 W51-A152A1-20 ORDERING NOTE: Some options illustrated below are not listed in the “Ordering Information” chart above. Options denoted by “Special” or “Special Order” in their descriptions are only offered on a special order basis. Other base and button colors and intermediate amp ratings are also available on a special order basis. All special order items are subject to extended leadtimes and significant minimum order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information regarding items with these options. Case Styles Marking Options For Contoured For Angular Button Design Button Design (Printed) (Molded) Standar Standard - d - Standard - Standar Standard - d - RESET/OFF RESET/OFF No Marking RESET/OFF RESET/OFF Printed on Molded into Bezel bezel Contoured Button Angular Button Design Design Terminal Types .205 .298 .374 (5.2) .250 (7.55) (9.5) (6.35) .25 (6.35) .504 .157 X .098 .25 .393 (12.8) (4.0 x 2.5) (6.35) .098 X .157 (10.0) .601 .156 (2.5 x 4.0) .393 (15.26) (3.95) .66 (10.0) TERMINAL THICKNESS .032 (16.76) FOR ALL TYPES (.81) Standard – Special Or Special Order - der - Standard – .250 Quick Connect Solder Solder Right Angle PC Terminal T Terminal erminal Terminal Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 113 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B W33 series One- and Two-Pole, Switchable Thermal Circuit Breaker / Power Switch With Optional Indicator Lamp Features Electrical Data @ 25°C • Combines on/off switch and circuit protection in a single unit. Calibration: Breaker will continuously carry 100% of rated load. It may trip • 2 to 20 amp ratings (<2A types available as special order). between 101% and 135%, but must trip at 135% within one • One or two pole sensing. hour at +25°C. • Lighted or non-lighted rocker actuator in various colors. Dielectric Strength: Over 2,000 volts RMS. • Convenient, snap-in mounting. Maximum Operating Voltages: 50VDC; 250VAC to 400 Hz. • Optional auxiliary switch available. Interrupt Capacity: 1,000 amps at 50VDC; 250VAC, 60 Hz. and • Trip-free operation. 125/250VAC, 400 Hz. 1,500 amps at 125/250VAC, 60 Hz. Resettable Overload Capacity: Ten times rated current. Agency Approvals Mechanical/Environmental Data W33 series is UL 1077 Recognized as Supplementary Protectors, File Termination: Poles 1&2: .250” (6.35mm) quick connect/solder terminals. E69543, and CSA Certified as Appliance Component Protectors, File Opt. Aux. Sw.: .110”(2.79mm) quick connect terminals. LR15734. Mounting: Snaps into panel from front. Actuator: Rocker or lighted rocker. Users should thoroughly review the technical data before selecting a product part Shock: 30g tested to IEC 68-2-27, test Ea. number. It is recommended that users also seek out the pertinent approvals files of Vibration: 8g tested to IEC 68-2-6, test Fc. the agencies/laboratories and review them to ensure the product meets the Switch Endurance Cycling: 50,000 operations at rated load. requirements for a given application. 1,000 operations at 200% rated load. Ambient Compensation Chart Time vs. Current Trip Curve @ +25°C 1.40 1000 All Models 1.30 Overload Trip Times 900 100% No Trip 1.20 135% Trip in 1 hour 800 200% 3.0 - 33 Sec. 1.10 400% 0.6 - 10 Sec. 700 1.00 600% 0.34 - 5 Sec. 800% 0.25 - 2.2 Sec. 600 0.90 1000% 0.20 - 0.6 Sec. 0.80 500 0.70 400 0.60 –20 –10 0 102030405060 300 Ambient Temperature In Degrees Centigrade (°C) 200 To use this chart: Read up from the ambient 100 temperature to the curve, and across to find a correction factor. Multiply the breaker rating by the 0 correction factor to determine the compensated .1 1 10 100 1000 rating. Calculate the overloads in terms of the Time In Seconds compensated rating to use the published trip curve. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 114 specified. Refer to inside back cover. Load Current As A Percent Of Breaker Rating Correction Factor Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B W 33 -S 1N1Q -20 1. Designator: W = Circuit breaker 2. Series Number: 33 = Two pole, rocker actuated 3. Circuit Function: S = Pole 1 – Switch only; Pole 2 – Series trip overload sensing. T = Poles 1 & 2 – Series trip overload sensing. SS = Same as S with auxiliary switch on pole 1. TS = Same as T with auxiliary switch on pole 1. D = 2 Pole switching. 4. Rocker Color: 1 = Black. 2 = White. 3 = Red. 4 = Amber. 5 = Smoke. 5. Light (available only with White, Red, Amber and Smoke rocker colors): A = 24VDC (Incandescent). B = 120VAC (Neon with resistor). C = 240VAC (Neon with resistor). N = No light. 6. Marking: 1 = International I/O. 2 = Contrasting I/O stamp (white toggle with black stamp). 7. Termination: Q = .250” x .032” (6.35 x .813mm) quick connect / solder terminals. 8. Amp Rating: 2 5 7 10 12 15 16 20 Consult factory for availability of ratings <2A Stock Items – Authorized distributors are more likely to stock the following items. W33-S1N1Q-5 W33-S4B1Q-10 W33-T4B1Q-5 W33-S1N1Q-15 W33-S4B1Q-15 W33-T4B1Q-10 W33-S1N1Q-20 W33-T2N1Q-20 W33-T4B1Q-15 Outline Dimensions Schematic LINE SIDE POLE POLE ROCKER 2 1 .980 1.724 .850 (24.89) (43.79) (21.59) I 1.690 (42.93) 1.890 (48.01) 1.120 0 (28.45) .250 PANEL CLAMPING LOAD SIDE (6.35) ARRANGEMENT .412 (10.46) NEON - AC INCANDESCENT - DC FITS .875 x 1.750 (22.22 x 44.45) PANEL OPENING FROM .032” - .250”(.813mm - 6.35mm) THICK Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 115 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B W23/W31 series Toggle or Push/Pull Actuator Thermal Circuit Breaker W23 W31 Maximum Resistance vs. Current Rating @ +25°C Features • 0.5 amp to 50 amp ratings may be used as on/off switch. Current Maximum • Cannot be reset against overload. Rating Resistance • W23 has visible trip indicator. in Amps in Ohms ± 30% • Screw termination. 1 .61 • Trip-free operation. 5 .03 10 .01 15 .006 Agency Approvals 20 .004 W23 and W31 are UL 1077 Recognized as Supplementary Protectors. 30 .003 File E69543, and CSA Certified as Appliance Component Protectors, 40 .002 50 .002 File LR15734. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Electrical Data @ +25°C Mechanical/Environmental Data Calibration: Will continuously carry 100% of rating, may trip between Endurance Cycling: More than 6,000 cycles at 100% of rating, or 10,000 101% and 134% of rating at 25°C. Must trip at 135% in mechanical cycles. one hour. Humidity: Will meet requirements of MIL-STD-202, Method 106. Maximum Operating Voltages: 50VDC or 250VAC (to 400 Hz). Salt Spray: Will meet requirements of MIL-STD-202, Method 101, Test Interrupting Capacity: Condition B. With 4X Max. Series Fuse Protection Termination: Two #8-32 screw terminals. 0.5-50 amp models — 1000 amps at 240VAC. Mounting: W23 — Threaded bushing, 3/8” (9.53mm) diameter. 30-50 amp models — 1000 amps at 50VDC. W31 — Threaded bushing, 15/32” (11.91mm) diameter, with or Without 4X Max. Series Fuse Protection without anti-rotation flats. 0.5-25 amp models — 2000 amps at 50VDC. Weight: Less than 2 oz. (57g). 10-20 amp models — 2000 amps at 120VAC. Resettable Overload Capacity: Ten times rated current. Dielectric Strength: Over 1,500 volts RMS. Time Vs. Current Trip Curve @ +25°C Ambient Compensation Chart 1.40 1000 (A) All 5-50 Amp Models (B) All 0.5-4 Amp Models 1.30 Overload Trip Times Overload Trip Times 900 100% No Trip 100% No Trip 1.20 (A) 135% Trip in 1 hour 135% Trip in 1 hour 800 200% 6.0-22 Sec. 200% 11-30 Sec. 1.10 400% 1.0-3.0 Sec. 400% 2.0-8.0 Sec. 600% 0.45-1.5 Sec. 600% 1.0-5.5 Sec. 700 800% 0.3-0.8 Sec. 800% 0.6-4.0 Sec. 1.00 1000% 0.25-0.6 Sec. 1000% 0.4-2.5 Sec. 600 0.90 500 0.80 (B) 400 0.70 0.60 300 –20 –10 0 102030405060 200 Ambient Temperature In Degrees Centigrade (°C) 100 0 To use this chart: Read up from the ambient .1 1 10 100 1000 temperature to the curve, and across to find a correction factor. Multiply the breaker rating by the correction factor Time In Seconds to determine the compensated rating. Calculate the overloads in terms of the compensated rating to use the published trip curve. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 116 specified. Refer to inside back cover. Load Current As A Percent Of Breaker Rating Correction Factor Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B W 23 -X 1A1 G -5 1. Designator: W = Circuit breaker 2. Series Number: 23 = Single pole, push/pull 3. Circuit Function: X = Series trip 4. Button: 1 = Black with white amp rate marking and white trip band. 5. Mounting Bushing: A = 3/8”-24 threaded bushing .375” (9.53mm) long, silver color 6. Terminals (See drawings for relative terminal positions): 1 = Screw terminals situated 90° to each other with #8-32 screws and washers installed. 3 = Screw terminals situtated parallel to each other pointing upward with #8-32 screws and washers installed. 7. Mounting Hardware: A = Knurled nut/hex nut installed G = Two hex nuts/lockwasher installed Z = No mounting hardware supplied 8. Amp Rating: 0.5 3 7.5 20 35 1 4 10 25 40 2 5 15 30 50 Stock Items – Authorized distributors are more likely to stock the following items. W23-X1A1G-1 W23-X1A1G-7.50 W23-X1A1G-25 W23-X1A1G-50 W23-X1A1G-2 W23-X1A1G-10 W23-X1A1G-30 W23-X1A1G-3 W23-X1A1G-15 W23-X1A1G-35 W23-X1A1G-5 W23-X1A1G-20 W23-X1A1G-40 Ordering Information Typical Part No. B W 31 -X 2M1 G -5 1. Designator: W = Circuit breaker 2. Series Number: 31 = Single pole, toggle actuator 3. Circuit Function: X = Series trip 4. Mounting Bushing: 1 = 15/32”-32 threaded bushing .320” (8.13mm) long, round, silver color 2 = 15/32”-32 threaded bushing .320” (8.13mm) long, double “D” , silver color 5. Toggle: M = Silver color metal toggle, round, with amp rate marking on end 6. Terminals (See drawing for relative terminal positions): 1 = Screw terminals situated 90° to each other with #8-32 screws and washers installed. 5 = Screw terminals situated parallel to each other pointing downward with #8-32 screws and washers installed. 7. Mounting Hardware: A = Knurled nut/hex nut intalled G = Two hex nuts/lockwasher installed Z = No mounting hardware supplied 8. Amp Rating: 0.5 3 7.5 20 35 1 4 10 25 40 2 5 15 30 50 Stock Items – Authorized distributors are more likely to stock the following items. W31-X2M1G-1 W31-X2M1G-10 W31-X2M1G-35 W31-X2M1G-2 W31-X2M1G-15 W31-X2M1G-40 W31-X2M1G-3 W31-X2M1G-20 W31-X2M1G-50 W31-X2M1G-5 W31-X2M1G-25 W31-X2M1G-7.50 W31-X2M1G-30 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 117 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B W23 Outline Dimensions Terminal Style 3 Terminal Style 1 .046 (1.17) #8-32 SCREWS RESET BUTTON IN “ON” POSITION WITH WASHERS WHITE INDICATOR NOT VISIBLE .690 (17.53) 3/8-24 THREADED BUSHING AMP RATING 45° 45° .250 (6.35) .56 .56 (14.2) (14.22) 1.384 .315 Dia. 5 (35.15) (8.00) 0.9 .46 (2.29) (11.7) .03 MAX. .388 (.76) (9.86) .570 1.600 (14.48) (40.64) inches 1.890 All dimensions are given as .046 (mm) (48.01) (1.17) 2.035 (51.69) Mounting Hardware Suggested Mounting Holes Lockwasher Hex Nut Knurled Nut (88-006B - Silver Color) (55-001D - Silver Color) (55-008A - Silver Color) ALTERNATE TEETH TWISTED IN OPPOSITE DIRECTIONS STRAIGHT KNURL .562 .562 .375-.386 (14.27) (9.53-9.80) (14.27) .078 .018 .545 – .567 .085 (1.98) (.46) (2.16) (13.84 – 14.40) W31 Outline Dimensions Terminal Style 1 Terminal Style 5 #8-32 SCREWS WITH WASHERS .03 MAX .690 (.76) AMP RATING (17.53) 15/32-32 THREADED BUSHING “ON” POSITION 45° .09 (2.3) .46 5 (11.7) 1.384 30° (35.15) REF. .56 .56 (14.2) (14.2) .335 (8.51) 45° “OFF” POSITION 1.600 .380 .625 (40.64) (9.65) (15.88) .046 .046 ANTI-ROTATION (1.17) 2.035 FLATS (1.17) (51.69) Mounting Hardware Suggested Mounting Holes Hex Nut Lockwasher Knurled Nut (55-001B - Silver Color) (88-002B - Silver Color) (55-010B - Silver Color) ALTERNATE TEETH TWISTED IN OPPOSITE DIRECTIONS STRAIGHT KNURL .635 .470 .470 .600 (15.24) (16.13) (11.94) (11.94) .125 .018 .385 .545 – .567 .078 (3.18) (.46) (9.78) (1.98) (13.84 – 14.40) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 118 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B W6/W9 series Magnetic Hydraulic Circuit Breakers Features Typical Resistance and Impedance • Designed for the international market. UL Recognized, CSA Certified, DC 50/60 Hz. 400 Hz. Current Resistance Impedance Impedance and VDE approved. (Amps) (Ohms) (Ohms) (Ohms) • Ratings to 50 amps. 0.2 90 90 180 • Heavy duty #10-32 stud connections. (W9) 1.0 1.2 1.2 2.0 • Quick-connect or screw terminals. (W6) 2.0 0.28 0.28 0.50 • Optional 10 amp auxiliary switch. 5.0 0.04 0.04 0.05 • Several delay curve options. 10.0 0.013 0.013 0.025 • Trip-free operation. 20.0 0.004 0.005 0.0065 30.0 0.0027 0.004 0.004 40.0 0.002 0.002 0.003 Agency Approvals 50.0 0.0015 0.0015 0.0025 UL: Recognized as Supplementary Protector under UL 1077. File Tolerance: 0.1 - 4.99 ± 15%; 5 - 9.99 ± 20%; 10 - 15 ± 25%; 16 - 30 ± 50%. E69543. CSA: Certified as a Supplementary Protector. File LR15734. Mechanical/Environmental Data VDE: Approved to VDE 0642/EN 60 934 (Circuit Breakers for Equipment) Operating Temperature: -40°C to +85°C. License No. 73782. Humidity: Meets requirements of Mil-STD-202 method 103. Shock: Tested per Mil-STD-202, method 213, test condition C Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of (100g @ 6 ms). the agencies/laboratories and review them to ensure the product meets the Vibration:Tested per Mil-STD-202, method 201, 10-55 Hz., 0.06" (1.52mm) requirements for a given application. total excursion in 2 planes. Fungus And Moisture Resistance: Special moisture resistant finish applied to all ferrous parts. Plastic parts are made of inherently Electrical Data fungus resistant material. Auxiliary Switch: See Auxiliary Switch Ratings Table 2 for details. Marking: W6 units have ON and OFF molded on the rocker of rocker actuated units (rocker actuated VDE units have international Calibration: Breakers will hold 100% of rated current. Breakers may trip between 101% and 124% of rated load (149% for 400 Hz. “1” and “0”). W9 units have ON and OFF molded into the area at the base of the toggle. International “1” and “0” symbols are units and 134% for AC/DC units). Breakers must trip at 125% of rated load and above (150% for 400 Hz. units and marked on the toggle for both W6 and W9. Mounting: Units are mounted with two #6-32 screws from the front of the 135% for AC/DC units). Dielectric Strength: 50/60 or 400 Hz., 1500V: DC, 1100V. panel. Metric models for use with M3 x 0.5 screws are available. To maintain published performance specifications, Insulation Resistance: 100 Megohms at 500VDC. Endurance: 10,000 on/off cycles - 6000 at rated load, 4000 at no load. units should not be mounted more than 90° from their normal upright position. Units tested at six cycles per minute, 1 second on and 9 seconds off at 25°C ambient. Weight: Approximately 2.5 ounces per pole. Approvals and Ratings Table 1 W6 Series UL/CSA (All Circuit Functions) W6 Series VDE (Circuit Function X) Current Interrupting Current Interrupting Maximum Frequency Phase Rating Capacity Maximum Frequency Phase Rating Capacity Voltage (Hz) (Amps) (Amps) Voltage (Hz) (Amps) (Amps) 65 DC - 0.2 - 50 2,000 65 DC - 0.2-50 2,000 277 50/60 1 0.2 - 20 5,000 250 50/60 1 0.2-30 5,000 277 50/60 1 21 - 50 2,500 250 50/60 1 31-50 2,000 277/480 50/60 3Ş-Wye 0.2 - 20 5,000 415/240 50/60 3Ş 0.2-30 5,000 250 400 1 0.2 - 20 2,500 250 400 1 21 - 50 1,250 250 400 3Ş-Wye 0.2 - 20 2,500 W9 Series UL/CSA (All Circuit Functions) W9 Series VDE (Circuit Function X) Current Interrupting Current Interrupting Maximum Frequency Phase Rating Capacity Maximum Frequency Phase Rating Capacity Voltage (Hz) (Amps) (Amps) Voltage (Hz) (Amps) (Amps) 65 DC - 0.2 - 50 2,000 65 DC - 0.2-50 2,000 277 50/60 1 0.2 - 50 5,000 250 50/60 1 0.2-30 5,000 277/480 50/60 3Ş-Wye 0.2 - 20 5,000 250 50/60 1 31-50 2,000 250 400 1 0.2 - 50 2,500 415/240 50/60 3Ş 0.2-30 5,000 250 400 3Ş-Wye 0.2 - 50 2,500 Approvals and Ratings Table 2 UL/CSA Switch Voltage Current Terminals Number 50/60 Hz. (Amps) WxTxL A 125 10 .093 x .020 x .250 (2.36 x .51 x 6.40) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 119 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Time vs. Current Trip Curves For W6 Series and W9 Series AC 50/60 Hz. DC & 50/60 Hz. 400 Hz. CURVE 0 NON-TIME DELAY CURVE 2 AC VOLTAGE 50/60 Hz. CURVE 3 AC VOLTAGE 50/60 Hz. 10,000 10,000 10,000 TRIP TIMES OVERLOAD TRIP TIMES OVERLOAD TRIP TIMES OVERLOAD @ 50/60 Hz. & DC @ 400 Hz. (SEC.) (SEC.) 1000 1000 1000 125% 10 - 150 125% 100 ms max. May Trip 125% 1 - 15 150% 55 ms max. 100 ms max. 200% 2.2 - 20 200% .15 - 1.5 100 100 100 200% 30 ms max. 30 ms max. 400% .2 - 2 400% .03 - .25 600% .03 - .75 400% 15 ms max. 15 ms max. 600% .007 - .15 10 10 10 600% 12 ms max. 12 ms max. 800% .007 - .15 800% .003 - .08 1000% .005 - .04 800% 12 ms max. 12 ms max. 1000% .003 - .04 1 1 1 .1 .1 .1 .01 .01 .01 .001 .001 .001 100 200 300 400 500 600 700 800 900 1000 1100 1200 100 200 300 400 500 600 700 800 900 1000 1100 1200 100 200 300 400 500 600 700 800 900 1000 1100 1200 0 0 0 125 150 125 150 125 150 LOAD CURRENT AS A PERCENT LOAD CURRENT AS A PERCENT LOAD CURRENT AS A PERCENT OF BREAKER RATING OF BREAKER RATING OF BREAKER RATING MOTOR START CURVE 12 HIGH INRUSH 50/60 Hz. CURVE 13 HIGH INRUSH 50/60 Hz. CURVE 10 HIGH INRUSH 50/60 Hz. AC 10,000 10,000 10,000 OVERLOAD TRIP TIMES OVERLOAD TRIP TIMES OVERLOAD TRIP TIMES (SEC.) (SEC.) (SEC.) 1000 1000 1000 125% 40 - 500 200% 9 - 100 125% 10 - 150 125% .8 - 30 400% 2 - 20 200% 3 - 25 200% .15 - 2.5 100 100 100 600% .8 - 10 400% .5 - 2.5 400% .03 - .3 800% .1 - 4.5 600% .15 - 1 1000% .009 - 2 600% .02 - .15 10 10 10 800% .015 - .7 800% .009 - .12 1000% .009 - .35 1000% .009 - .09 1 1 1 .1 .1 .1 .01 .01 .01 .001 .001 .001 100 200 300 400 500 600 700 800 900 1000 1100 1200 100 200 300 400 500 600 700 800 900 1000 1100 1200 100 200 300 400 500 600 700 800 900 1000 1100 1200 0 0 0 125 150 125 150 125 150 LOAD CURRENT AS A PERCENT LOAD CURRENT AS A PERCENT LOAD CURRENT AS A PERCENT OF BREAKER RATING OF BREAKER RATING OF BREAKER RATING DC CURVE 3 DC VOLTAGE CURVE 53 DC HIGH INRUSH CURVE 2 DC VOLTAGE 10,000 10,000 10,000 OVERLOAD TRIP TIMES OVERLOAD TRIP TIMES OVERLOAD TRIP TIMES (SEC.) (SEC.) (SEC.) 1000 1000 1000 125% 80 - 700 125% .6 - 7 125% 2 - 55 200% 15 - 150 200% .16 - 1.5 400% 2 - 20 200% .60 - 8 100 100 100 600% .70 - 10 400% .1 - 1.5 400% .03 - .25 800% .10 - 3 600% .01 - .13 600% .02 - .5 1000% .01 - .1 10 10 10 800% .004 - .05 800% .004 - .05 1000% .004 - .025 1000% .003 - .015 1 1 1 .1 .1 .1 .01 .01 .01 .001 .001 .001 100 200 300 400 500 600 700 800 900 1000 1100 1200 100 200 300 400 500 600 700 800 900 1000 1100 1200 100 200 300 400 500 600 700 800 900 1000 1100 1200 0 0 0 125 150 125 150 125 150 LOAD CURRENT AS A PERCENT LOAD CURRENT AS A PERCENT LOAD CURRENT AS A PERCENT OF BREAKER RATING OF BREAKER RATING OF BREAKER RATING AC/DC AC 400 Hz. CURVE 34 DC, 50/60 Hz. STANDARD DELAY CURVE 2 AC VOLTAGE 400 Hz. CURVE 3 AC VOLTAGE 400 Hz. 10,000 10,000 10,000 OVERLOAD TRIP TIMES OVERLOAD TRIP TIMES OVERLOAD TRIP TIMES (SEC.) (SEC.) (SEC.) 1000 1000 1000 135% 1 - 90 150% .55 - 5.5 150% 5 - 60 200% .60 - 20 200% 2.2 - 20 200% .18 - 2 100 100 100 400% .095 - 2 400% .02 - .2 400% .3 - 3.2 600% .02 - .95 600% .006 - .075 600% .01 - .17 10 800% .002 - .45 10 10 800% .006 - .06 800% .004 - .05 1000% .002 - .09 1000% .004 - .035 1000% .005 - .045 1 1 1 .1 .1 .1 .01 .01 .01 .001 .001 .001 100 200 300 400 500 600 700 800 900 1000 1100 1200 100 200 300 400 500 600 700 800 900 1000 1100 1200 100 200 300 400 500 600 700 800 900 1000 1100 1200 0 0 0 125 150 125 150 LOAD CURRENT AS A PERCENT 125 150 LOAD CURRENT AS A PERCENT LOAD CURRENT AS A PERCENT 135 OF BREAKER RATING OF BREAKER RATING OF BREAKER RATING Note: For instantaneous curves for all voltages refer to Curve 0 Non-Time Delay under the AC 50/60 Hz. heading. Pulse Tolerance Specifications Pulse tolerance is defined as a single pulse of a half sine Pulse Tolerance Value Time wave (1/2 cycle or 8 milliseconds) that will not trip the Delay Inertia breaker. An inertia wheel for increased pulse tolerance is Voltage Curve Standard Delay available by specifying “P” after the time delay curve number in the ordering information. The table at right lists 27.5 18 pulse tolerance values of standard and inertia delay models. AC 3 6 18 50/60 Hz. 10 18 30 12 18 30 13 18 30 AC 2 6.5 18 400 Hz. 3 5.5 18 To determine pulse tolerance multiply breaker rating by value in table. For example, a 2A breaker with time delay curve 3 has a standard pulse tolerance of 12A (2A x 6). The same breaker with an inertia delay has a pulse tolerance of 36A (2A x 18). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 120 specified. Refer to inside back cover. TIME IN SECONDS TIME IN SECONDS TIME IN SECONDS TIME IN SECONDS TIME IN SECONDS TIME IN SECONDS TIME IN SECONDS TIME IN SECONDS TIME IN SECONDS TIME IN SECONDS TIME IN SECONDS TIME IN SECONDS Catalog 1308242 Issued 3-03 P&B Ordering Information W6 Series Typical Part No. B Q 2- W 67- X2 1 20 1. Circuit Breaker Mounting: W = #6-32 mounting threads. M = M3.0 x 0.5 mounting threads. 2. Number of Poles: 67 = Single pole 68 = Two pole 69 = Three pole 70 = Four pole 3. Circuit Function: (Only X is VDE approved) A = Series trip with auxiliary switch (.093” QC) X = Series trip 4. Actuator: (One actuator per pole) 1 = Black toggle 3 = Black rocker 5 = Red rocker 9 = Red toggle 2 = White toggle 4 = White rocker 6 = Grey rocker 5. Termination: Q = .250” QC (DIN 46 244) [25A Max. VDE] S = #8-32 screw [30A Max. VDE] T = #10-32 screw [50A Max. VDE] Note: “T” termination must be used for all ratings of 31 amps or above. 6. Maximum Line Voltage: (See Table 1 for current ranges) UL/CSA 1 = 277VAC, 50/60 Hz. VDE 1 = 250VAC, 415/240VAC TYPES 2 = 277/480 TYPES 5 = 65VDC 3 = 250VAC, 400 Hz. 7 = AC/DC 250VAC, 415/240VAC, 65VDC 5 = 65VDC (Delay curve 34 must be specified.) 7 = AC/DC 277VAC or 65VDC (Delay curve 34 must be specified.) 7. Time Delay Curve: 0 = Instantaneous 10 = AC high inrush (Motor start) Notes: Curves may be specified with increased pulse tolerance for 1/2 cycle by 2 = Standard delay 12 = AC high inrush version of #2 adding "P" after curve, See delay curve section for availability and details. 3 = Short delay 13 = AC high inrush version of #3 53 = DC high inrush 34 = Combination AC/DC standard delay 8. Amp Rating: 0.20 0.50 1.0 2.0 3.0 4.0 6.0 7.5 9.0 11.0 15.0 25.0 35.0 45.0 Consult factory for 0.25 0.75 1.5 2.5 3.5 5.0 7.0 8.0 10.0 12.0 20.0 30.0 40.0 50.0 other values. 9. VDE Approval: Blank = UL/CSA approved breaker V = VDE approved breaker without auxiliary switch Authorized distributors are more likely to stock the following items. W67-A2Q12-5 W67-X2Q12-5 W67-X2Q13-1 W67-X2Q13-25 W67-X2Q52-15 W68-X2Q12-5 W68-X2Q12-30 W69-X2Q12-15 W67-A2Q12-10 W67-X2Q12-7 W67-X2Q13-2 W67-X2Q13-30 W67-X2Q52-20 W68-X2Q12-7 W68-X2Q13-15 W69-X2Q12-20 W67-X2Q10-3 W67-X2Q12-10 W67-X2Q13-3 W67-X2Q50-5 W67-X2Q52-30 W68-X2Q12-10 W68-X2Q110-10 W69-X2Q12-25 W67-X2Q10-5 W67-X2Q12-15 W67-X2Q13-10 W67-X2Q50-10 W67-X2Q110-15 W68-X2Q12-15 W68-X2Q110-20 W69-X2Q12-30 W67-X2Q12-2 W67-X2Q12-20 W67-X2Q13-15 W67-X2Q52-5 W67-X2Q110-20 W68-X2Q12-20 W69-X2Q12-5 W69-X2Q110-20 W67-X2Q12-3 W67-X2Q12-30 W67-X2Q13-20 W67-X2Q52-10 W68-X2Q12-3 W68-X2Q12-25 W69-X2Q12-10 W69-X2Q110-30 Ordering Information W9 Series Typical Part No. B W 1 1 2- 20 91- X 1. Circuit Breaker Mounting: W = #6-32 mounting threads. M = M3.0 x 0.5 mounting threads. 2. Number of Poles: 91 = Single pole 92 = Two pole 93 = Three pole 94 = Four pole 3. Circuit Function: (Only X is VDE approved) A = Series trip with auxiliary switch (.093” QC) X = Series trip 4. Actuator: (One actuator per pole): 1 = Black toggle 2 = White toggle 5. Maximum Line Voltage: (See Table 1 for current ranges) UL/CSA 1 = 277VAC, 50/60 Hz. VDE 1 = 250VAC, 415/240VAC TYPES 2 = 277/480 TYPES 5 = 65VDC 3 = 250VAC, 400 Hz. 7 = AC/DC 250VAC, 415/240VAC, 65VDC 5 = 65VDC (Delay curve 34 must be specified.) 7 = AC/DC 277VAC or 65VDC (Delay curve 34 must be specified.) 6. Time Delay Curve: 0 = Instantaneous 10 = AC high inrush (Motor start) Notes: Curves may be specified with increased pulse tolerance for 1/2 cycle 2 = Standard delay 12 = AC high inrush version of #2 by adding "P" after curve. See delay curve section for availability and details. 3 = Short delay 13 = AC high inrush version of #3 53 = DC high inrush 34 = Combination AC/DC standard delay 7. Amp Rating: 0.20 0.75 2.0 3.5 6.0 8.0 11.0 20.0 35.0 50.0 0.25 1.0 2.5 4.0 7.0 9.0 12.0 25.0 40.0 Consult factory for other values 0.50 1.5 3.0 5.0 7.5 10.0 15.0 30.0 45.0 8. VDE Approval: Blank = UL/CSA approved breaker V = VDE approved breaker without auxiliary switch Authorized distributors are more likely to stock the following items. W91-X112-1 W91-X112-15 W91-X113-15 W91-X152-40 W92-X112-5 W92-X112-30 W92-X1110-30 W93-X112-30 W91-X112-2 W91-X112-20 W91-X150-5 W91-X152-50 W92-X112-7 W92-X112-40 W93-X112-5 W93-X112-40 W91-X112-3 W91-X112-40 W91-X152-10 W91-X1110-20 W92-X112-10 W92-X112-50 W93-X112-10 W93-X112-50 W91-X112-5 W91-X112-50 W91-X152-15 W92-X112-1 W92-X112-15 W92-X113-15 W93-X112-15 W93-X1110-20 W91-X112-7 W91-X113-5 W91-X152-20 W92-X112-2 W92-X112-20 W92-X113-20 W93-X112-20 W93-X1110-30 W91-X112-10 W91-X113-10 W91-X152-30 W92-X112-3 W92-X112-25 W92-X1110-20 W93-X112-25 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 121 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions - Toggle Actuator Models W6 Series Panel Mounting Cutout 1.640 .245 .235 (41.66) (6.22) .750 (5.97) Ş .625 +.010 (19.05) -.000 15.88 +0.25 LINE ( ) O -0.00 A N 1 PER POLE 29° 1.660 1.530 (42.16) (38.86) 30° 1.048 (26.62) OFF B LO A D Ş .156 (3.96) 2.040 .67 [2 PLACES PER POLE] (51.82) (17.02) W6 Series 1 Pole 2 Pole 3 Pole 4 Pole Ş .590 (15.00) 1.500 2.250 3.000 .750 (38.10) (57.15) (76.20) (19.05) 1.660 2.000 (42.16) (50.80) 1.05 1.22 (26.67) (31.00) 6.32 TH'D. .14 (3.56) DP . TYP. M3 X 0.5 OPTIONAL Note: Multi-pole models furnished with separate handle tie hardware. VDE Models UL/CSA Models UL/CSA/VDE Models W/Screw Terminals W/Screw Terminals W/Aux. Switch .235 2.032 2.38 “A” STYLE (5.9) (51.61) .416 (60.45) (10.57) LINE LINE LINE .827 C (20.85) 1.058 1.530 (26.87) NO (38.86) NC LOAD LOAD LOAD Notes: 1. Terminal protrusion dimensions are referenced from back of mounting panel. 2. Main terminals are male quick connect type .250 (6.35) wide x .031 (.79) thick x .377 (9.58) long. Optional 8-32 x .250 (6.35) or 10-32 x .250 (6.35) screw type. 3. Panel mounting cutout detail mtg. detail tol.: ± .005 (.13) unless noted. Add additional cutouts to correspond to number of poles. Outline drawing tolerance ± .015 (.38) unless noted. Dimensions in brackets ( ) are in millimeters. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 122 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions - Rocker Actuator Models W6 Series 1Pole 2, 3 & 4 Pole 3.000 .805 1.640 (76.20) (20.45) (41.66) .750 2.250 4 (19.05) (57.15) POLE .390 1.500 .375 (9.91) 3 (38.10) (9.53) .180 POLE 2 POLE (4.57) LOAD D .388 1.530 2.000 1.30 (9.86) (38.86) ON ON ON ON ON 1.660 (50.80) (33.0) 2.600 (42.16) (66.04) OFF OFF OFF OFF OFF LINE A .235 (5.97) .375 2.430 (9.53) TAPPED FOR #6-32 .750 .750 (61.72) M3 X 0.5 OPTIONAL (19.05) (19.05) .750 (19.05) Panel Mounting Cutout VDE Rocker Marking .750 .750 .750 (19.05) (19.05) (19.05) .205 .375 .750 .375 (5.21) (9.53) (19.05) (9.53) 1.250 Notes: (31.75) .388 1. Outline drawing tolerance ± .015 (.38) unless 1.660 2.000 (9.86) noted. Dimensions in brackets ( ) are in (42.16) I (50.80) 2.600 millimeters. (66.04) 2. Mounting Detail Tol.: ± .005 (.13) unless noted O .750 1 POLE Ş .156 (19.05) 1.500 (3.96) 2 POLE (38.10) TYP. 2 PER POLE 2.250 3 POLE TAPPED FOR #6-32 (57.15) M3 X 0.5 OPTIONAL 3.000 4 POLE (76.20) Outline Dimensions W9 Series Series Trip Model Series Trip Model .750 .375 .750 .750 1.845 (19.05) (9.53) (19.05) (19.05) .398 (46.86) .281 .375 .750 .313 (10.77) (7.14) (9.53) (19.05) (7.95) LINE ON ON ON ON ON ON ON ON ON ON ON .218 29° (5.54) 1.438 (36.53) 1.940 2.065 2.50 (49.28) (52.45) 30° OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF (63.5) OFF LOAD 2 POLE .14 1 POLE 1.500 #10-32 (3.56) (38.10) STUD TERMINATION 2.10 2.250 3 POLE TAPPED #6-32 X .16 (4.06) (53.34) (57.15) DEEP 3.000 4 POLE 2.50 .74 M3 X 0.5 OPTIONAL (76.20) (64.00) (18.8) Series Trip Model Panel Mounting Cutout Detail With Common Enclosed Auxiliary Switch .750 .750 Notes: (19.05) (19.05) 2.46 'A' STYLE .750 .385 1. Terminal protrusion .732 (62.48) .281 (19.05) (9.78) (18.59) dimensions are referenced (7.14) from the back of the mounting panel. .907 2. Mounting detail tolerance (23.04) LINE ±.005 (13) unless noted. 1.450 3. Outline drawing tolerance ± C (36.83) 2.065 .015 (.38) unless noted. 1.940 NO (52.45) Dimensions in brackets ( ) (49.28) are in millimeters. NC LOAD .76 1 POLE 2X Ş .156 (19.3) (3.96) 1.52 2 POLE 2.50 PER POLE (38.6) 2.28 (64.00) 3 POLE (57.9) 3.04 4 POLE (77.2) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 123 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Engineering Notes Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 124 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 TRANSFORMERS Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 4000 ................... 5-30VA, Wire Leads, Class II ................... 204 4000 ................... 10-30VA, QC Terminals, Class II ............. 205 4000 ................... 20-40VA, Plate Mount, Class II................ 206 4000 ................... 40-50VA, Wire Leads, Class II ................. 207 Transformers ........................... 201-212 2 4000 ................... 40-50VA, QC Terminals, Class II ............. 208 4000 ................... 60-75VA, Wire Leads, Class II ................. 209 4000 ................... 60-75VA, QC Terminals, Class II ............. 210 Low-signal PC Board Relays .......... 5-18 3 4700 ................... 60-150VA, Wire Leads or QC, UL 508 .... 211 57 ....................... Transformer Relay for HVAC ................... 212 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ................ 22-35 5 Relays with 6 Forcibly-Guided Contacts.............. 36-79 Plug-in/Panel Mount 7 General Purpose Relays................ 80-88 Power Relays & Definite 8 Purpose Contactors...................... 89-131 Latching, Impulse & 9 Rotary Relays ...............................149-154 Automotive Relays ......................141-148 10 Solid State Relays & 11 Input/Output Modules ................195-207 Time Delay Relays & 12 Counters ........................................208-232 Sensors & Monitors ...................233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 201 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Transformers...Questions and Answers What is a Transformer? A transformer is a passive electrical device which is designed to change one AC voltage to another by magnetic induction. It “steps-up” or “steps-down” voltage in order to match incoming supply voltage from the utility to the voltage required by the user’s end product. Typical USA supply voltages are 120, 208, 240, 277, 480 (and 575 in Canada). Common International voltages include 110, 220, 380, and 415. What is an Isolation Transformer? An isolation transformer is a transformer whose primary and secondary windings are separate for the purpose of isolating the circuit from the supply source. What is an Autotransformer? An autotransformer has only one winding, which is shared by the primary and secondary circuits. Autotransformers do not provide isolation but offer a substantial savings when used to obtain small increments of voltage above or below the input voltage. What is a Class II Transformer? A Class II transformer is used to supply Class II circuits. Class II transformers have a maximum VA (Volt-Ampere) rating of less than 100 and a maximum secondary output of 30 VAC. The maximum VA generally offered is 75 and the most common secondary voltage is 24 VAC. All Class II transformers are either inherently or non-inherently limited. This means that the maximum output current of the transformer is limited, either by the intrinsic coil impedance or by a fuse or circuit breaker. These transformers are designed to meet the requirements of U.L. 1585. Inherently Energy Limited Transformers - Class II transformers up to 50 VA are “Inherently Limited” which means that the transformer, if overloaded, will short itself out and fail safely, not requiring a fuse. Non-Inherently Energy Limited Transformers - 60 thru 75 VA Class II transformers are generally protected by a resettable circuit breaker or a fuse within the transformer secondary. Without this overload protection, the transformer would not satisfy the safety requirements for a Class II circuit. What is a General Purpose Transformer? General purpose transformers include any VA rating along with primary and secondary voltage ratings up to 600 VAC. Although internal fusing is an option, no fusing is required. However, applicable U.L. specifications may require fusing in the end product. These transformers are designed to meet the requirements of U.L. 506. What is Voltage Regulation? Voltage regulation is the percent of change in the output voltage when the load is reduced from full load to no load while the input voltage remains constant. What is the effect of a load on a control transformer? A control transformer is designed to provide rated output voltage at full VA. As the load decreases, the output voltage will go up. Conversely, increases in load will result in lower output voltages. Typically, the smaller the VA size of the unit, the greater difference there is between no-load and full-load voltage. Part Numbering System This chart illustrates a breakdown of our part numbering system on a few of our most popular models. Consult factory for your specific requirements. Typical Part No. B 4000 – 01 E 07 BB 999 1. Series: 4000 = Class II (UL 1585) inherently protected or internally fused. 4500 = Autotransformer. 4001 = Class II (UL 1585) externally fused. 4600 = 60 Hz. only 4100 = No UL or CSA approval. 4700 = General Purpose (UL 506). 2. Packaging: – = Bulk Pack Y = Individual Box 3. Primary and Secondary Voltages: Primary V Secondary V Primary V Secondary V 01 = 120 24 09 = 208/240 24 02 = 240 24 13 = 208/240/480 24 03 = 277 24 20 = 120 12 04 = 480 24 51 = 380/415 24 05 = 120/208/240 24 78 = 575 24 4. VA and Series Dimension: VA Rating Series Size VA Rating Series Size A = 10 3/4” (19.05mm) AW = 50 7/8” (22.22 mm) C = 20 3/4” (19.05mm) L = 60 15/16” (23.81mm) M = 30 3/4” (19.05mm) J = 75 15/16” (23.81mm) E = 40 7/8” (22.22 mm) K = 100 1 1/4” (31.75mm) V = 40 3/4” (19.05mm) Z = 150 1 1/4” (31.75mm) 5. Stack Thickness and Fusing (Generally determined at factory): 19 = 0.5” (12.7mm) thick. 07 = 0.875” (22.225mm) thick. 15 = 1.00” (25.4mm) thick. 02 = 0.625” (15.875mm) thick. 04 = 1.00” (25.4mm) thick. 18 = 1.25” (31.75mm) thick. 6. Mounting and Termination: Mounting Termination Mounting Termination K = Foot Mount Leads AE = Foot Mount QCs on Top BC = 4” (101.6mm)foot Screw / Leads BB = Foot Mount QCs on One Side G = Panel Mount Leads AB = Foot Mount QCs on Other Side 7. Customer ID Suffix: 000-999 = Factory assigned customer ID Example: 4000-01E07BB999 This part number is a Class II transformer with a 120V primary and 24V secondary. It is 40VA and inherently energy limited. This is a foot mount transformer with quick connect terminals (line & load) exiting out of the same side of the transformer cover. Note: This is a partial listing only. Consult factory for your specific requirements. All combinations of voltage and VA may not be available. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 202 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Custom Transformer Capabilities In addition to our industry leading standard transformer series (see the following pages), We have a proven track record of being an innovative leader in custom transformer designs. We specialize in working with our customers in the initial stages of their design process, offering ideas and suggestions which lead to a transformer product that can be manufactured with the lowest Defective Parts Per Million (DPPM) levels and at the highest value to the customer. The following is a list of guidelines for transformer products which compliment our Demand Flow Manufacturing system. Leaded Transformers - Quick Connect Transformers - PC Mount Transformers - Inductors • 5 VA through 400 VA • Spray on rust preventative • Butt stack and weld lamination construction • Molded bobbin construction • Numerous welded bracket options • Molded cover with integral strain relief for lead or quick connect terminal When a transformer fits the above criteria and the customer is willing to share in the design process with us, we can both benefit from Design For Manufacturing (DFM), as demonstrated in the following example: Traditional Method DFM Method • DPPM level >2000 • DPPM level <100 • 10 Week lead time • 1 Week lead time • 3 Part numbers • 1 Universal part number • 12 Inventory turns • 50 Inventory turns • Costly • 20% Cost improvement • Fragile design • Robust design Our electrical and mechanical design groups are ready to work with you on your specific product needs. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 203 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 5 VA - 30VA Inherently Energy Limited No Secondary Fusing Required Wire Leads File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Specifications Features • Type K Foot Mount - features a steel bracket welded to the bottom of the Wire Size: All leads are 18 AWG stranded 2/64” (.794 mm) insulation laminations for easy mounting. thickness. Standard parts have 12” (305 mm) total length with • Type G Panel Mount - features .179” (4.55 mm) diameter holes in each 1/2” (12.7 mm) strip. corner to allow direct mounting to a panel. Frequency: 50/60 Hz. • Multiple voltage combinations are available. Consult factory for availability. Insulation Class: UL Class B (130°C). Weight: 5VA – 10.56 oz. (300 g); 10VA – 10.88 oz. (308 g); 20VA – 14.24 oz. (404 g); 30VA – 19.2 oz. (544 g). Standard “999” Models Available Partial Listing of Custom Models Primary V Secondary V 20VA Primary V Secondary V 5VA 10VA 20VA 30VA 120 24 4000-01C02K999 120 24 4000-01X19K* 4000-01A19K* 4000-01C02K* 4000-01M04K* 120 24 4000-01C02K999 240 24 4000-02X19K* 4000-02A19K* 4000-02C02K* 4000-02M04K* 277 24 4000-03X19K* 4000-03A19K* 4000-03C02K* 4000-03M04K* For more details about standard models see Part 480 24 4000-04X19K* 4000-04A19K* 4000-04C02K* 4000-04M04K* Numbering System table at beginning of transformer 208/240 24 – – 4000-09C02K* 4000-09M04K* section in this catalog . 120 12 – – 4000-20C02K* – * A three digit customer ID suffix will be assigned by the factory. All custom model part numbers are listed as Type K Foot Mount. To specify Type G Panel Mount, replace K in above part numbers with G. Outline Dimensions 2.812 (71.42) .187 DIA (4.75) 2.25 “A” DIM. (57.15) .22 (5.59) 1.88 Type K (47.75) Foot Mount 1.25 03 (31.75) (.76) SEE TABLE .750 (19.05) 1.55 (39.37) “A” DIM. “B” DIM. .179 DIA TYP 1.55 .218 SEE (4.55) (39.37) (5.54) TABLE Type G 1.50 Panel Mount (38.1) 1.25 (31.75) 1.88 (47.75) “A” and “B” Dimensions 5 VA 10 VA 20 VA 30 VA “A” Dimension [inches (mm)] 1.5 (38.1) 1.5 (38.1) 1.625 (41.28) 2.00 (50.8) “B” Dimension [inches (mm)] 0.5 (12.7) 0.5 (12.7) 0.625 (15.9) 1.00 (25.4) Details regarding leads on standard models Primary Leads Secondary Leads Voltage COM 120 208 240 277 480 575 24 VAC Color Black White Red Orange Brown Black/Red Gray Blue Yellow Length [inches (mm)] 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) Strip Length [inches (mm)] 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 204 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 10VA - 30VA Inherently Energy Limited No Secondary Fusing Required Quick Connect Terminals File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications • Type BB Same Side Termination - features quick connect terminals with Terminals: Standard male quick connects are .250” x .032” (6.35 x .81 line and load terminations on the same side of transformer. mm). Other available quick connects include .187” x .032” • Type AE Laydown Termination - features quick connect terminals with line (4.75 x .81 mm) and .187” x .020” (4.75 x .51 mm). and load terminations on the top of transformer. Frequency: 50/60 Hz. • Type AB Opposite Side Termination - features quick connect terminals Insulation Class: UL Class B (130°C). with line and load terminations on opposite sides of transformer. Weight: 10VA – 10.9 oz. (308 g); 20VA – 14.1 oz. (399 g); • Multiple voltage combinations are available. Consult factory for availability. 30VA – 18.6 oz. (525 g). Standard “999” Models Available Partial Listing of Custom Models No standard models are offered. Primary V Secondary V 10VA 20VA 30VA 30VA 120 24 4000-01A19BB* 4000-01C02BB* 4000-01M04BB* 4000-01M04BB* 240 24 4000-02A19BB* 4000-02C02BB* 4000-02M04BB* 4000-02M04BB* 277 24 – – 4000-03M04BB* 4000-03M04BB* 480 24 – – 4000-04M04BB* 4000-04M04BB* For more details about standard models see Part 208/240 24 – – 4000-09M04BB* 4000-09M04BB* Numbering System table at beginning of 120 12 – 4000-20C02BB* – – transformer section in this catalog . * A three digit customer ID suffix will be assigned by the factory. To specify Type AE Laydown Termination, replace BB in above part numbers with AE. Outline Dimensions 2.812 “A” DIM. .22 (71.42) (5.59) 2.25 1.60 “B” DIM. (57.15) (40.6) .187 DIA (4.75) Type BB .750 1.88 Same Side 1.40 (19.05) (47.75) Termination (35.56) .031 (.787) 2.812 1.60 1.40 (71.42) (40.6) (35.56) 1.88 .187 DIA (4.75) (47.75) Type AE 1.0 Laydown (2.54) “A” DIM. Termination “B” DIM. R .375 (9.53) 2.25 .048 (57.15) (1.22) 2.812 .22 (71.42) (5.59) “A” DIM. 1.55 “B” DIM. 2.25 (39.4) .187 DIA (57.15) (4.75) Type AB 1.88 .750 1.40 Opposite Side (19.05) (47.75) (35.56) Termination R .375 (9.53) .031 (.787) “A” and “B” Dimensions 10VA 20VA 30VA “A” Dimension [inches (mm)] 1.50 (38.1) 1.625 (41.28) 2.00 (50.8) “B” Dimension [inches (mm)] .50 (12.7) 0.625 (15.88) 1.00 (25.4) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 205 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 20VA - 40VA Inherently Energy Limited No Secondary Fusing Required Plate for Electrical Box Mounting File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications • Type BC Plate Mount - mounted on a 4” (101.6mm) square plate designed Wire Size: All leads are 18 AWG stranded 2/64” (.794 mm) insulation to fit a standard 4” (101.6mm) square electrical box. thickness. Standard parts have 12” (305 mm) total length with • The line voltage is connected inside the electrical boxto the color-coded 1/2” (12.7 mm) strip. leads on the transformer. The low voltage is terminated to either 1/4” Frequency: 50/60 Hz. (4.75 mm) quick connects and/or #6-32 screw furnished on the Insulation Class: UL Class B (130°C). secondary side. Weight: 20VA – 19.2 oz. (544 g); 40VA – 32 oz. (906 g). • Multiple voltage combinations are available. Consult factory for availability. Standard “999” Models Available Partial Listing of Custom Models Primary V Secondary V 20VA 40VA Primary V Secondary V 20VA 40VA 120 24 4000-01C02BC999 4000-01V18BC999 120 24 4000-01C02BC* 4000-01V18BC* 208/240 24 4000-09C02BC* 4000-09V18BC* For more details about standard models see Part Numbering System table at beginning of transformer section in this catalog . * A three digit customer ID suffix will be assigned by the factory. All custom model part numbers are listed as Type K Foot Mount. To specify Type G Panel Mount, replace K in above part numbers with G. Outline Dimensions 4.25 (108) “A” DIM. 3.375 (85.72) .22 .50 (5.59) (12.7) .187 (4.75) 1.55 (39.37) 4.25 (108) 3.375 1.25 1.88 (85.72) (31.75) (47.75) .187 (4.75) 1.187 (30.15) “B” DIM. 2.25 1.00 (57.15) (25.4) “A” and “B” Dimensions 20 VA 40 VA “A” Dimension [inches (mm)] 1.625 (41.28) 2.56 (65.02) “B” Dimension [inches (mm)] .625 (15.88) 1.25 (31.75) Details regarding leads on standard models Primary Leads Secondary Leads Voltage COM 120 208 240 277 480 575 24 VAC Color Black White Red Orange Brown Black/Red Gray Blue Yellow Length [inches (mm)] 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) Strip Length [inches (mm)] 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 206 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 40 VA - 50VA Inherently Energy Limited No Secondary Fusing Required Wire Leads File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Specifications Features • Type K Foot Mount - features a steel bracket welded to the bottom of the Wire Size: All leads are 18 AWG stranded 2/64” (.794 mm) insulation laminations for easy mounting. thickness. Standard parts have 12” (305 mm) total length with • Type G Panel Mount - features .156” (3.96 mm) diameter holes in each 1/2” (12.7 mm) strip. corner to allow direct mounting to a panel. Frequency: 50/60 Hz. • Multiple voltage combinations are available. Consult factory for availability. Insulation Class: UL Class B (130°C). Weight: 40VA – 24.3 oz. (600 g); 50VA – 33.6 oz. (953 g). Standard “999” Models Available Partial Listing of Custom Models Primary V Secondary V 40VA 50VA Primary V Secondary V 40VA 40VA 50VA 120 24 4000-01E07K999 4000-01AW18K999 120 24 4000-01V18K* 4000-01E07K* 4000-01AW18K* 277 24 4000-03E07K999 4000-03AW18K999 240 24 4000-02V18K* 4000-02E07K* 4000-02AW18K* 480 24 4000-04E07K999 4000-04AW18K999 277 24 4000-03V18K* 4000-03E07K* 4000-03AW18K* 120/208/240 24 4000-05E07K999 – 480 24 4000-04V18K* 4000-04E07K* 4000-04AW18K* 208/240 24 4000-09E07K999 4000-09AW18K999 120/208/240 24 – 4000-05E07K* – 208/240 24 4000-09V18K* 4000-09E07K* 4000-09AW18K* For more details about standard models see Part Numbering System 208/240/480 24 – 4000-13E07K* – table at beginning of transformer section in this catalog . 380/415 24 4000-51V18K* 4000-51E07K* 4000-51AW18K* 575 24 4000-78V18K* 4000-78E07K* 4000-78AW18K* * A three digit customer ID suffix will be assigned by the factory. All custom model part numbers are listed as Type K Foot Mount. To specify Type G Panel Mount, replace K in above part numbers with G. Outline Dimensions [1] 2.812 (71.42) [2] 3.125 (79.38) .187 DIA (4.75) [1] 2.25 (57.15) “A” DIM. .22 [2] 2.625 (66.68) (5.59) Type K [1] 1.88 (47.75) [2] 2.188 (55.58) Foot Mount [1] 1.25 (31.75) [2] 1.44 (36.58) 03 .750 (.76) (19.05) SEE TABLE [1] 1.55 (39.37) [2] 1.813 (46.05) [1] 1.55 (39.37) .218 “A” DIM. [2] 1.813 (46.05) (5.54) “B” DIM. Type G [1] 1.50 (38.1) SEE Panel Mount TABLE [1] 1.25 (31.75) [2] 1.75 (44.45) [2] 1.44 (36.58) [1] 1.88 (47.75) .156 DIA TYP (3.96) [2] 2.188 (55.58) [1] Applies to V18 models. “A” and “B” Dimensions [2] Applies to E07 & AW18 models. 40 VA / V18 40 VA / E07 50 VA / AW18 “A” Dimension [inches (mm)] 2.25 (57.15) 2.125 (53.98) 2.56 (65.02) “B” Dimension [inches (mm)] 1.25 (31.75) 0.875 (22.22) 1.25 (31.75) Details regarding leads on standard models Primary Leads Secondary Leads Voltage COM 120 208 240 277 480 575 24 VAC Color Black White Red Orange Brown Black/Red Gray Blue Yellow Length [inches (mm)] 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) Strip Length [inches (mm)] 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 207 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 40VA - 50VA Inherently Energy Limited No Secondary Fusing Required Quick Connect Terminals File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Specifications Features • Type BB Same Side Termination - features quick connect terminals with Terminals: Standard male quick connects are .250” x .032” (6.35 x .81 line and load terminations on the same side of transformer. mm). Other available quick connects include .187” x .032” • Type AE Laydown Termination - features quick connect terminals with line (4.75 x .81 mm) and .187” x .020” (4.75 x .51 mm). and load terminations on the top of transformer. Frequency: 50/60 Hz. • Type AB Opposite Side Termination - features quick connect terminals Insulation Class: UL Class B (130°C). with line and load terminations on opposite sides of transformer. Weight: 40VA – 22.4 oz. (636 g); 50VA – 35.2 oz. (999 g). • Multiple voltage combinations are available. Consult factory for availability. Standard “999” Models Available Partial Listing of Custom Models Primary V Secondary V 40VA Primary V Secondary V 40VA 40VA 40VA 50VA 120 24 4000-01E07AE999 120 24 4000-01E07BB* 4000-01V18BB* 4000-01V18AB* 4000-01AW18BB* 120 24 4000-01E07BB999 240 24 4000-02E07BB* 4000-02V18BB* 4000-02V18AB* 4000-02AW18BB* 208/240 24 4000-09E07AE999 277 24 4000-03E07BB* 4000-03V18BB* 4000-03V18AB* 4000-03AW18BB* 480 24 4000-04E07BB* 4000-04V18BB* 4000-04V18AB* 4000-04AW18BB* For more details about standard models see Part 208/240 24 4000-09E07BB* 4000-09V18BB* 4000-09V18AB* 4000-09AW18BB* Numbering System table at beginning of 380/415 24 4000-51E07BB* 4000-51V18BB* 4000-51V18AB* 4000-51AW18BB* transformer section in this catalog . 575 24 4000-78E07BB* 4000-78V18BB* – 4000-78AW18BB* * A three digit customer ID suffix will be assigned by the factory. To specify Type AE Laydown Termination, replace BB in above part numbers with AE. Outline Dimensions [1] 2.25 (57.15) “A” DIM. .22 [2] 3.125 (79.38) (5.59) [1] 2.25 (57.15) [1] 1.50 (38.1) [2] 2.625 (66.68) “B” DIM. [2] 1.81 (45.97) .187 DIA (4.75) Type BB [1] 1.88 (47.75) .750 Same Side [1] 1.40 (35.56) [2] 2.188 (55.58) (19.05) Termination [2] 1.494 (37.95) .031 (.787) [1] 2.812 (71.42) [1] 1.40 (35.56) [1] 1.50 (38.1) [2] 3.125 (79.38) [2] 1.494 (37.95) [2] 1.81 (45.97) .187 DIA 1.88 (4.75) (47.75) Type AE Laydown 1.0 “A” DIM. (2.54) “B” DIM. Termination R .375 (9.53) [1] 2.25 (57.15) .048 [2] 2.625 (66.68) (1.22) [1] 2.812 (71.42) .22 [2] 3.125 (79.38) (5.59) “A” DIM. 1.55 (39.4) “B” DIM. [1] 2.25 (57.15) .187 DIA [2] 2.625 (66.68) (4.75) Type AB 1.40 (35.56) .750 [1] 1.88 (47.75) Opposite Side (19.05) [2] 2.188 (55.58) Termination R .375 (9.53) .031 (.787) “A” and “B” Dimensions [1] Applies to V18 models. 40 VA / V18 40 VA / E07 50 VA / AW18 [2] Applies to E07 & AW18 models. “A” Dimension [inches (mm)] 2.25 (57.15) 2.125 (53.98) 2.56 (65.02) “B” Dimension [inches (mm)] 1.25 (31.75) 0.875 (22.22) 1.25 (31.75) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 208 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 60VA -75VA Non-Inherently Energy Limited Secondary Fusing Required Wire Leads File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications • Type K Foot Mount - features a steel bracket welded to the bottom of the Wire Size: All leads are 18 AWG stranded 2/64” (.794 mm) insulation laminations for easy mounting. thickness. Standard parts have 12” (305 mm) total length with • Type G Panel Mount - features .218” (5.54 mm) diameter holes in each 1/2” (12.7 mm) strip. corner to allow direct mounting to a panel. Frequency: 50/60 Hz. • For agency approval, 60 & 75VA transformers must have one of the Insulation Class: UL Class B (130°C). following overcurrent protectors in series with the secondary winding: Weight: 60VA – 35.2 oz. (997 g); 75VA – 38.4 oz. (1087 g). Internal fuse, integral circuit breaker. Any customer-supplied fusing or Partial Listing of Custom Models protection must be approved by the factory. Primary V Secondary V 60VA 75VA • Multiple voltage combinations are available. Consult factory for availability. 120 24 4000-01L15K* 4000-01J15K* Standard “999” Models Available 240 24 4000-02L15K* 4000-02J15K* Primary V Secondary V 75VA 277 24 4000-03L15K* 4000-03J15K* 120 24 4000-01J15K999 480 24 4000-04L15K* 4000-04J15K* 277 24 4000-03J15K999 120/208/240 24 4000-05L15K* 4000-05J15K* 208/240 24 4000-09J15K999 208/240 24 4000-09L15K* 4000-09J15K* 575 24 4000-78J15K999 208/240/480 24 – 4000-13J15K* 120/208/240/480 24 4000-08J15K999 380/415 24 – 4000-51J15K* 575 24 – 4000-78J15K* For more details about standard models see Part Numbering System table at beginning of transformer section in this catalog . All 75VA standard models * A three digit customer ID suffix will be assigned by the factory. come with an integral circuit breaker. For Type G Panel Mount, replace K in above part numbers with G. Outline Dimensions 3.562 (90.47) “A” DIM. 3.00 (76.2) “B” DIM. .22 (5.59) .187 DIA Type K (4.75) Foot Mount - 2.50 Internally 1.830 (63.5) (46.48) Fused .062 (1.57) .750 (19.05) SEE TABLE 2.106 (53.49) 3.562 (90.47) “A” DIM. 3.00 (76.2) .187 DIA “B” DIM. (4.75) Type K SEE TABLE Foot Mount - .22 (5.59) Integral 1.830 2.50 Circuit (46.48) (63.5) Breaker .062 .830 (1.57) (21.1) .750 (19.05) 2.106 (53.49) “A” DIM. .218 (5.54) 2.106 (53.49) “B” DIM. 2.0 Type G (50.8) 1.830 Panel Mount (46.48) .218 DIA SEE TABLE (5.54) 2.50 (63.5) “A” and “B” Dimensions for 60VA & 75VA Models L15K & J15K L15K & J15K J41K Internally Fused w/ Integral Circuit Breaker Standard Part “A” Dimension [inches (mm)] 2.475 (62.86) 3.25 (82.55) 3.45 (87.63) “B” Dimension [inches (mm)] 1.00 (25.4) 1.00 (25.4) 1.125 (28.58) Details regarding leads on standard models Primary Leads Secondary Leads Voltage COM 120 208 240 277 480 575 24 VAC Color Black White Red Orange Brown Black/Red Gray Blue Yellow Length [inches (mm)] 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) Strip Length [inches (mm)] 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 209 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4000 series Class II UL 1585 Transformer 60VA -75VA Non-Inherently Energy Limited Secondary Fusing Required Quick Connect Terminals File E87824 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications • Type BB Same Side Termination - features quick connect terminals with Terminals: Standard male quick connects are .250” x .032” (6.35 x .81 line and load terminations on the same side of transformer. mm). Other available quick connects include .187” x .032” • Type AE Laydown Termination - features quick connect terminals with line (4.75 x .81 mm) and .187” x .020” (4.75 x .51 mm). and load terminations on the top of transformer. Frequency: 50/60 Hz. • For agency approval, 60 & 75VA transformers must have one of the Insulation Class: UL Class B (130°C). following overcurrent protectors in series with the secondary winding: Weight: 60VA – 35.2 oz. (997 g); 75VA – 38.4 oz. (1087 g). Internal fuse, integral circuit breaker. Any customer-supplied fusing or Partial Listing of Custom Models protection must be approved by the factory. • Multiple voltage combinations are available. Consult factory for availability. Primary V Secondary V 60VA 75VA 120 24 4000-01L15BB* 4000-01J15BB* 240 24 4000-02L15BB* 4000-02J15BB* 277 24 4000-03L15BB* 4000-03J15BB* Standard “999” Models Available 480 24 4000-04L15BB* 4000-04J15BB* Primary V Secondary V 75VA 120/208/240 24 4000-05L15BB* 4000-05J15BB* 120 24 4000-01J15AE999 208/240 24 4000-09L15BB* 4000-09J15BB* 208/240 24 4000-09J15AE999 208/240/480 24 – 4000-13J15BB* For more details about standard models see Part Numbering System table at 380/415 24 – 4000-51J15BB* beginning of transformer section in this catalog. All 75VA standard models come 575 24 – 4000-78J15BB* with an integral circuit breaker. * A three digit customer ID suffix will be assigned by the factory. For Type AE Laydown Termination, replace BB in above part numbers with AE. Outline Dimensions 3.562 (90.47) .22 (5.59) 2.10 (53.34) “A” DIM. 3.00 (76.2) “B” DIM. .187 DIA (4.75) .750 Type BB (19.05) 2.50 1.830 Same Side .830 (46.48) (63.5) Termination (21.1) R .375 (9.53) .062 (1.57) 2.40 (61.0) 1.830 (46.48) .219 2.10 (53.34) 3.562 (90.47) (5.56) R .375 (9.53) Type AE 1.0 “A” DIM. 2.50 Laydown (2.54) “B” DIM. (63.5) Termination - Internally Fused .187 DIA (4.75) 3.00 (76.2) .062 (1.57) 1.830 (46.48) 2.40 (61.0) .830 .219 3.562 (90.47) (5.56) (21.1) R .375 Type AE (9.53) Laydown 1.0 Termination - 2.50 (2.54) (63.5) Integral Circuit “A” DIM. “B” DIM. .187 DIA Breaker (4.75) 3.00 (76.2) .062 (1.57) “A” and “B” Dimensions for 60VA & 75VA Models Internally Fused w/ Integral Circuit Breaker “A” Dimension [inches (mm)] 2.475 (62.86) 3.25 (82.55) “B” Dimension [inches (mm)] 1.00 (25.4) 1.00 (25.4) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 210 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 4700 series UL 506 Transformer 60VA - 150VA Non-Fused Wire Leads or Quick Connects File E102980 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Specifications • Type K Foot Mount - features wire leads and a steel bracket welded to Wire Size: All leads are 18 AWG stranded 2/64” (.794 mm) insulation the bottom of the laminations for easy mounting. thickness. Standard parts have 12” (305 mm) total length with • Type BB Same Side Termination - features quick connect terminals with 1/2” (12.7 mm) strip. line and load terminations on the same side of transformer. Terminals: Standard male quick connects are .250” x .032” (6.35 x .81 • Multiple voltage combinations are available. Consult factory for availability. mm). Other available quick connects include .187” x .032” (4.75 x .81 mm) and .187” x .020” (4.75 x .51 mm). Frequency: 50/60 Hz. Insulation Class: UL Class B (130°C). Weight: 60VA – 36.8 oz. (1042 g); 100VA – 80 oz. (2270 g); 150VA – 83.2 oz. (2356 g). Partial Listing of Custom Models Standard “999” Models Available Primary V Secondary V 100VA 150VA Primary V Secondary V 60VA 100VA 120 24 4700-01K18K* 4700-01Z18K* 120 24 4700-81L15K999 – 277 24 4700-03K18K* 4700-03Z18K* 120/208/240/480 24 – 4700-08K18K999 480 24 4700-04K18K* 4700-04Z18K* For more details about standard models see Part Numbering System table at 120/208/240/480 24 4700-08K18K* – beginning of transformer section in this catalog . 208/240 24 4700-09K18K* 4700-09Z18K* 208/230/460 24 4700-12K18K* – 208/240/480 24 4700-13K18K* – 400 24 4700-48K18K* 4700-48Z18K* 575 24 4700-78K18K* 4700-78Z18K* 460/575 24 4700-130K18K* 4700-130Z18K* * A three digit customer ID suffix will be assigned by the factory. Outline Dimensions 3.562 2.475 (90.47) (62.87) 3.00 1.00 (76.2) (25.4) .22 (5.59) .187 DIA (4.75) Type K 2.50 Foot Mount (63.5) 1.830 60VA (46.48) .750 .062 (19.05) (1.57) SEE TABLE 2.106 (53.49) 3.125 (79.38) 2.53 (64.26) 1.25 3.75 (31.75) .187 X R. 375 (95.25) (4.75 x 9.52) Type K 2.165 Foot Mount (54.99) 2.313 100VA (58.75) 3.125 (79.38) SEE TABLE 2.875 (73.03) Primary Leads Secondary Leads Voltage COM 120 208 240 277 480 575 24 VAC Color Black White Red Orange Brown Black/Red Gray Blue Yellow Length [inches (mm)] 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) 12 (305) Strip Length [inches (mm)] 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) 0.5 (12.7) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 211 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 57 series Transformer Relay for HVAC Applications File E113772 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Relay Data @ 25°C Features Arrangements: 1 Form A (SPST-NO) through 2 Form C (DPDT), depending • Cover mounts on conventional 4” square box. • All leads terminate in the box. upon relay selected • Leads are 8” (203.2 mm) long with 1/2” (12.7mm ) stripped) Rating: 9100 Series Relay: 12 FLA, 60 LRA, 15A resistive @ 125VAC; • Standard transformer is 40VA Class II Energy Limited. Other transformers 6 FLA, 36 LRA, 15A resistive @ 240VAC; are available. 3/4 HP @ 125/250VAC. • Five secondary terminations (two are hot) for thermostat connection and 9400 Series Relay: 12 FLA, 60 LRA, 18A resistive @ 125VAC; #6-32 screw termination is standard. Quick connects are optional. 8 FLA, 48 LRA, 18A resistive @ 240VAC. • Assembled with choice of 9100 or 9400 series relays. • Custom-built to meet customer requirements. Specifications Insulation Class: UL Class B (130°C). Duty Cycle: Continuous. Weight: 32 oz. (909 g) approximately Ordering Information 57 series products are custom-built. Your Tyco Electronics sales engineer will need to consult with the factory to develop a model meeting your needs. Standard part numbers listed below are more likely to be available from stock. Custom parts only. Outline Dimensions 4.25 (108) 3.375 2.00 .50 (85.72) (50.8) (12.7) .187 (4.75) 4.25 (108) Using 9100 3.375 (85.72) Series Relay .187 1.88 1.25 (4.75) (47.75) (31.75) 1.25 2.25 1.0 (31.75) (57.15) (25.4) 2.56 (65.0) 4.25 (108) 2.00 3.375 .50 (50.8) (85.72) (12.7) .187 (4.75) 4.25 (108) Using 9400 3.375 Series (85.72) Relay .187 1.25 1.88 (4.75) (31.75) (47.75) 1.25 2.25 1.0 (31.75) 2.56 (57.15) (25.4) (65.0) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 212 specified. Refer to inside back cover. LABEL LABEL LABEL LABEL Catalog 1308242 Issued 3-03 LOW-SIGNAL PC BOARD RELAYS Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 159/160 ................ Mercury-Wetted Reed Relays............... 308 190 ....................... DPDT, THT Relay .................................. 331 D2N (V23105 ) ...... DPDT, THT Relay .................................. 333 FP2 ....................... DPDT, THT Relay .................................. 323 Transformers.............................. 201-212 2 FT2/FU2................ DPDT, SMT or THT Relay ..................... 327 FX2 ....................... DPDT, THT Relay .................................. 329 IM ......................... DPDT, SMT or THT Relay ..................... 321 Low-signal PC Board Relays 301-338 3 JWD/JWS............. SPST-NO – DPDT, Dry Reed Relay ....... 303 MT2 ...................... DPDT, THT Relay .................................. 335 MT4 ...................... 4PDT, THT Relay ................................... 337 Mid-Range PC Board Relays ....... 19-21 OL ........................ SPST-NO & DPST-NO, Dry Reed Relay 304 4 OMR..................... SPST-NO & DPST-NO, Dry Reed Relay 306 OUAZ ................... SPDT, THT Relay................................... 319 T81 ....................... SPDT, THT Relay................................... 318 Power PC Board Relays ................ 22-35 5 P1 (V23026) .......... SPDT, SMT or THT Relay ...................... 314 P2 (V23079) .......... DPDT, SMT or THT Relay ..................... 325 TSC....................... SPDT, THT Relay................................... 316 Relays with V23026 (P1) .......... SPDT, SMT or THT Relay ...................... 314 6 Forcibly-Guided Contacts.............. 36-79 V23079 (P2) .......... DPDT, SMT or THT Relay ..................... 325 V23105 (D2N) ....... DPDT, THT Relay .................................. 333 Plug-in/Panel Mount 7 General Purpose Relays................ 80-88 High Performance Relays If you need a low signal relay capable of switching up to 6Ghz or enduring challenging environments such as extreme shock, NOTE: A question tree that may help you in selecting an Power Relays & Definite vibration, or temperature, you should consider our CII high appropriate low-signal relay for your application can be 8 Purpose Contactors...................... 89-131 performance relays. There is an overview of our high perfor- found on the next page. mance relay product line in section 14 of this databook. Latching, Impulse & 9 Rotary Relays ...............................149-154 Automotive Relays ......................141-148 10 Solid State Relays & 11 Input/Output Modules ................195-207 Time Delay Relays & 12 Counters ........................................208-232 Sensors & Monitors ...................233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 301 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 LOW-SIGNAL PC BOARD RELAYS Low Signal (<3A), PC Board Relay Question Tree This guide helps the user select one or more relay series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, the user must assume ultimate responsibility for determining the suitability of a relay for a particular application. What mounting type do you need? Through-Hole PC Board Terminals Surface Mount PC Board Terminals One Pole One Pole 159/160 Series V23026 (P1) Series Bridging or Non-bridging, Hg -wetted Reed Relay. Low Profile, Polarized. JWD/JWS Series Dry Reed Relay. Two Pole OL Series Dry Reed Relay. IM Series OMR Series Ultraminiature, Slim or Low Profile, Polarized. Dry Reed Relay. FT2/FU2 Series OUAZ Series Slim, Polarized. Non-polarized. V23079 (P2) Series T81 Series Slim, Polarized. Non-polarized. TSC Series Non-polarized. V23026 (P1) Series Low Profile, Polarized. Two Pole 190 Series Non-polarized. FP2 Series Low Profile, Polarized. FT2/FU2 Series Slim, Polarized. FX2 Series Slim, Polarized. IM Series Ultraminiature, Slim or Low Profile, Polarized. JWD Series Dry Reed Relay. MT2 Series Non-polarized. V23079 (P2) Series Slim, Polarized. V23105 (D2N) Series Non-polarized. Four Pole MT4 Series Non-polarized. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 302 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B JWD/JWS series Dual In-Line Package & Single In-Line Package Dry Reed Relays Features File E29244 File LR81479 • JWD has dual in-line package (DIP) configuration. (14-pin DIP) Ordering Information – Boldface items are more likely to be stocked. • JWS has single in-line package (SIP) configuration. • Low cost, dry reed reliability with various contact arrangements. Nom. Resis- Must Must Max. Nom. Wir- • Wave solderable and immersion cleanable. Relay Volt- tance Operate Release Volt- Coil ing • Optional coil suppression diode. Part Diode age ±10% Voltage Voltage age Power Dia. No. (VDC) (Ohms) (VDC) (VDC) (VDC) (mW) No. Contact Data @ 25°C JWD (DIP units) with 1 Form A (SPST-NO) contacts rated 10W max. JWD-107-1 No 5/6 500 3.8 0.5 19 50/72 1 Arrangements: 1 Form A (SPST - NO) on JWD & JWS. 1 Form B (SPST - NC), JWD-107-5 Yes 5/6 500 3.8 0.5 19 50/72 1 1 Form C (SPDT) and 2 Form A (DPST-NO) on JWD only. JWD-107-3 No 12 1,200 9.6 1.0 19 120 1 Material: Ruthenium. JWD-107-7 Yes 12 1,200 9.6 1.0 19 120 1 Expected Mechanical Life: 100 million operations. JWD-171-5 No 24 2,150 19.2 2.0 40 268 2 Expected Electrical Life: JWD-171-10 Yes 24 2,150 19.2 2.0 40 268 2 Resistive Load End of Life Criteria No. of Operations JWD (DIP units) with 2 Form A (DPST-NO) contacts rated 10W max. 6 JWD-171-21 No 5/6 200 3.8 0.5 14 125/180 3 Forms A & B 20VDC, 500mA 500mV Loss 1 x 10 6 JWD-171-25 Yes 5/6 200 3.8 0.5 14 125/180 3 20VDC, 250mA 500mV Loss 20 x 10 6 JWD-171-23 No 12 500 9.6 1.0 19 288 3 Low Level (5VDC, 1mA) 50 Ohms 100 x 10 JWD-171-27 Yes 12 500 9.6 1.0 19 288 3 6 Form C 12VDC, 500mA 500mV Loss 1 x 10 JWD-171-24 No 24 2,200 19.2 2.0 40 262 3 6 10VDC, 10mA 50 Ohms 25 x 10 JWD-171-28 Yes 24 2,200 19.2 2.0 40 262 3 6 Low Level (5VDC, 1mA) 50 Ohms 100 x 10 JWD (DIP units) with 1 Form B (SPST-NC) contacts rated 10W max. Contact Ratings: JWD-171-12 No 5/6 500 3.8 0.5 7 50/72 4 Maximum Switched Voltage: 100VDC for Forms A & B; 28VDC for Form C. JWD-171-17 Yes 5/6 500 3.8 0.5 7 50/72 4 JWD-171-14 No 12 1,200 9.6 1.0 16 120 4 Maximum Switched Current: 500mA for all models. JWD-171-19 Yes 12 1,200 9.6 1.0 16 120 4 Maximum Switched Power:10W for Forms A & B; 3W for Form C. JWD-171-15 No 24 2,200 19.2 2.0 40 262 4 Initial Contact Resistance: 200 milliohms, max. at 10mA, 6VDC. JWD-171-20 Yes 24 2,200 19.2 2.0 40 262 4 JWD (DIP units) with 1 Form C (SPDT) contacts rated 3W max. Initial Dielectric Strength JWD-172-1 No 5/6 200 3.8 0.5 12 125/180 5 Between Open Contacts: 250VDC for Forms A & B; 175VDC for Form C. JWD-172-5 Yes 5/6 200 3.8 0.5 12 125/180 5 JWD-172-3 No 12 500 9.6 1.0 19 288 5 Between Contacts and Coil: 500VDC. JWD-172-7 Yes 12 500 9.6 1.0 19 288 5 JWD-172-4 No 24 2,200 19.2 2.0 38 262 5 Initial Insulation resistance JWD-172-8 Yes 24 2,200 19.2 2.0 38 262 5 10 JWD-172-155 No 5/6 200 3.8 0.5 12 125/180 6 Between Mutually Insulated Conductors: 10 ohms at 100VDC. JWD-172-159 Yes 5/6 200 3.8 0.5 12 125/180 6 JWD-172-157 No 12 1,000 9.6 1.0 19 144 6 Coil Data @ 25°C JWD-172-161 Yes 12 1,000 9.6 1.0 19 144 6 JWD-172-158 No 24 2,150 19.2 2.0 38 268 6 See Ordering Information table. JWD-172-162 Yes 24 2,150 19.2 2.0 38 268 6 Operate Data @ 25°C JWS (SIP units) with 1 Form A (SPST-NO) contacts rated 10W max. JWS-117-1 No 5 500 3.8 0.5 16 50 7 Operate Time (Including Bounce)†: 1.5 ms, max. JWS-117-6 Yes 5 500 3.8 0.5 16 50 7 Release Time (Including Bounce)†: 0.5 ms, max., for Forms A & B; JWS-117-3 No 12 530 9.6 1.0 19 272 7 3.0 ms, max., for Form C. JWS-117-8 Yes 12 530 9.6 1.0 19 272 7 JWS-117-13 No 12 1,850 9.6 1.0 30 78 7 † At or from Nominal Coil Voltage. JWS-117-18 Yes 12 1,850 9.6 1.0 30 78 7 JWS-117-5 No 24 2,150 19.2 2.0 36 268 7 Environmental Data JWS-117-10 Yes 24 2,150 19.2 2.0 36 268 7 Temperature Range: -35°C to +85°C. Shock: 100 g, max., in three planes for 8 ms, 1/2 wave pulse. Outline Dimensions Vibration: 20 g, max., between 10 and 2,000 Hz. .300 MAX. .770 MAX. JWD Mechanical Data (19.56) (7.62) Termination: Printed circuit terminals on 0.100" (2.54mm) grid centers. Enclosure Type: Black molded epoxy package. .125 ± .010 .315 (8.0) MAX. Weight: 0.08 oz. (2.3g) approximately. 12 6 7 (3.18 ± .254) WITH TERMINALS VERTICAL Wiring Diagrams (Top Views) Dia. 1 Dia. 2 Dia. 3 Dia. 4 76+21 76 +21 76 +21 76+21 .020 TYP. (.51) .100 TYP. .6004° MAX..012 TYP.(2.54) (15.24)TYP. (.3) MAGNET 8 9 13 14 8 9 13 14 8 9 13 14 8 9 13 14 .800 MAX. .260 MAX. JWS (20.32) (6.6) Dia. 5 Dia. 6 Dia. 7 76+21 76+21 .307 MAX. (7.8) 1 35 7 89 13 14 89 1314 1+3 5 7 .018 TYP. .020 TYP. .010 TYP. Note: Terminal numbers are for reference only and do not appear on relays. (.46) (.51) (.25) .200 TYP. .125 ± .010 Users should thoroughly review the technical data before selecting a product (5.08) (3.18 ± .254) part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the Note: Magnetic shielding may be required between relays when they are placed in very product meets the requirements for a given application. close proximity to one another. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 303 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OL series Dry Reed Relay Telecommunications, Office Machines. Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data • Low cost, small package dry reed relay. Voltage: 6 to 24VDC. • 1 Form A and 2 Form A contact arrangements. Nominal Power: 100 mW to 270mW. • Immersion cleanable, sealed version available. Consult factory. Coil Temperature Rise: 30°C max., at rated coil voltage. Max. Coil Power: 150% of nominal. Duty Cycle: Continuous. Contact Data @ 20°C Arrangements: 1 Form A (SPST-NO), 2 Form A (DPST-NO). Material: Rh, Ru. Coil Data @ 20°C Max. Switching Rate: 300 ops./min. (no load). OL 30 ops./min. (rated load). Expected Mechanical Life: 100 million operations (no load). Rated Coil Nominal Coil Must Operate Must Release Expected Electrical Life: 1,000,000 operations (rated load). Voltage Current Resistance Voltage Voltage Minimum Load: 1mA @ 1VDC. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) Initial Contact Resistance: 150 milliohms @ 100mA, 6VDC. 6 34.3 175 4.20 0.60 9 22.5 400 6.30 0.90 12 17.1 700 8.40 1.20 24 11.4 2,100 16.80 2.40 Contact Ratings Ratings: 100μA @ 5VDC, 100,000,000 operations. 1mA @ 5VDC, 50,000,000 operations. 5mA @ 5VDC, 50,000,000 operations. Operate Data 5mA @ 12VDC, 50,000,000 operations. 10mA @ 12VDC, 50,000,000 operations. Must Operate Voltage: 70% of nominal voltage or less. 100mA @ 12VDC, 10,000,000 operations. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 1.0 ms max. 100mA @ 24VDC, 7,000,000 operations. Release Time: 0.5 ms max. 200mA @ 24VDC, 7,000,000 operations. 400mA @ 24VDC, 5,000,000 operations. Max. Switched Voltage: AC: 120V. DC: 60V. Max. Switched Current: 0.5A. Environmental Data Max. Switched Power: 10VA, 10W. Temperature Range: Operating: -30°C to +60°C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Initial Dielectric Strength Operational: 100m/s (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing) Between Open Contacts: 200VDC. (1 second). Between Coil and Contacts: 3,000VDC. (1 second). Surge Voltage Between Coil and Contacts: 3,000V (10 / 160μs). Mechanical Data Initial Insulation Resistance Termination: Printed circuit terminals. Between Mutually Insulated Elements: 1,000M ohms min. @ 100VDCM. Enclosure (94V-0 Flammability Ratings): Snap-on dust cover. Weight: 0.07 oz (2g) approximately. www.tycoelectronics.com Dimensions are shown for Dimensions are in inches over Specifications and availability Technical support: reference purposes only. (millimeters) unless otherwise subject to change. 304 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OL -C -1 12 H ,000 1. Basic Series: OL = Dry Reed Relay. 2. Enclosure: C = Snap-on dust cover. 3. Termination: 1 = 1 pole 2 = 2 pole 4. Coil Voltage: 06 = 6VDC 12 = 12VDC 09 = 9VDC 24 = 24VDC 5. Contact Rating: H = 0.1A @ 120VAC 6. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Coil Alignment Recess Coil Alignment Recess .244 .260 .216 .228 (6.2) (5.5) (6.6) (5.8) .157 .157 (4.0) (4.0) .795 ± .012 .795 ± .012 (20.2 ± .3) (20.2 ± .3) 2 – .1 ± .004 (2.54 ± .1) .700 ± .01 .700 ± .01 (17.78 ± .25) (17.78 ± .25) .311 ± .012 .311 ± .012 (7.9 ± .3) (7.9 ± .3) .200 ± .004 (5.08 ± .1) 2 Form A 1 Form A Wiring Diagrams (Bottom View) 2 Form A 1 Form A PC Board Layouts (Bottom View) 6 – .031 DIA. 4 – .031 DIA. (.8) (.8) 2 – .1 ± .004 .200 ± .004 (2.54 ± .1) (5.08 ± .1) .700 ± .004 .700 ± .004 (17.78 ± .1) (17.78 ± .1) 2 Form A 1 Form A Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 305 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OMR series Dry Reed Relay Telecommunications, Office Machines. File No. E82292 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data • Low cost, small package dry reed relay. Voltage: 6 to 24VDC. • 1 Form A contact and 2 Form A arrangements. Nominal Power: 100 mW to 280mW. Coil Temperature Rise: 30°C max., at rated coil voltage. Max. Coil Power: 160% of nominal. Duty Cycle: Continuous. Contact Data @ 20°C Arrangements: 1 Form A (SPST-NO), 2 Form A (DPST-NO). Material: Rh, Ru. Max. Switching Rate: 300 ops./min. (no load). Coil Data @ 20°C 30 ops./min. (rated load). Expected Mechanical Life: 100 million operations (no load). OMR Expected Electrical Life: 1,000,000 operations (rated load). Rated Coil Nominal Coil Must Operate Must Release Minimum Load: 1mA @ 1VDC. Voltage Current Resistance Voltage Voltage Initial Contact Resistance: 150 milliohms @ 100mA, 6VDC. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) 5/6 24.0 250 3.50 0.50 9 12.9 700 6.30 0.90 12 11.4 1,050 8.40 1.20 24 11.5 2,080 16.80 2.40 Contact Ratings Ratings: 100μA @ 5VDC, 100,000,000 operations. 1mA @ 5VDC, 50,000,000 operations. 5mA @ 5VDC, 50,000,000 operations. Operate Data 5mA @ 12VDC, 50,000,000 operations. 10mA @ 12VDC, 50,000,000 operations. Must Operate Voltage: 70% of nominal voltage or less. 100mA @ 12VDC, 10,000,000 operations. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 1.0 ms max. 100mA @ 24VDC, 7,000,000 operations. Release Time: 0.5 ms max. 200mA @ 24VDC, 7,000,000 operations. 400mA @ 24VDC, 5,000,000 operations. Max. Switched Voltage: AC: 120V. DC: 60V. Max. Switched Current: 0.5A . Max. Switched Power: 10VA, 10W. Environmental Data Temperature Range: Operating: -30°C to +70°C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Operational: 100m/s (10G approximately). Initial Dielectric Strength Operating Humidity: 20 to 85% RH. (Non-condensing) Between Open Contacts: 200VDC. (1 second). Between Coil and Contacts: 3,000VDC. (1 second). Surge Voltage Between Coil and Contacts: 3,000V (10 / 160μs). Mechanical Data Initial Insulation Resistance Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Between Mutually Insulated Elements: 1,000M ohms min. @ 100VDCM. OMR: Open, no cover. OMR-C: Snap-on dust cover. Weight: 0.16 oz (4.5g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 306 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OMR -C -1 12 H ,000 1. Basic Series: OMR = Dry Reed Relay. 2. Enclosure: Blank = Open, no cover. C = Snap-on dust cover. 3. Termination: 1 = 1 pole 2 = 2 pole 4. Coil Voltage: 06 = 6VDC 12 = 12VDC 09 = 9VDC 24 = 24VDC 5. Contact Rating: H = 0.5A @ 120VAC 6. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Open Type, 1 Form A Open Type, 2 Form A .350 (8.9) .353 (9.0) .157 (4.0) .157 .992 (4.0) (25.2) .1 .046 .992 (2.54) (1.18) (25.2) .437 .315 .2 (11.1) (8.0) (5.08) .1 (2.54) 2 – .024 DIA .018 x .018 (.6) .1 .1 ± .004 (.45 x .45) .900 (2.54) (2.54 ± .1) (22.85) .045 .799 ± .004 (1.15) 20.3 ± .1 Snap-on Dust Cover Type, Snap-on Dust Cover type, 1 Form A 2 Form A .390 .390 (9.9) (9.9) .157 .157 (4.0) 1.067 (4.0) 1.067 (27.1) .083 (27.1) .1 .083 (2.12) (2.54) (2.12) .2 .1 .390 (5.08) (2.54) .504 (9.9) (12.8) .1 .018 x .018 (2.54) (.45 x .45) .1 ± .004 2 – .024 DIA (2.54 ± .1) .8 ± .004 (.6) 20.32 ± .1 .9 (22.85) Wiring Diagrams (Bottom View) PC Board Layout (Bottom View) .2 1 Form A 1 Form A (5.08) .1 ± .004 4 – .035 DIA (2.54 ± .1) .800 ± .004 (.9) (20.3 ± .1) .1 (2.54) .1 (2.54) .1 (2.54) 2 Form A 2 Form A .900 6 – .035 DIA (22.85) (.9) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 307 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 159/160 series Mercury-Wetted Reed Relays Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. General Information The mercury-wetted contact relay represents one of the more sophisticated types of relays made today. The early pioneer work in mercury-wetted contact switching dates back to the 1950’s, as telephone laboratory scientists sought out the “perfect contact”. Mercury- wetted contacts represent the nearest thing to the perfect contact yet developed, being characterized by such parameters as: bounce-free operation; very low and stable contact resistance; hermetic protection; fast operating speeds; Form C or Form D contact, action contact life measured in billions of operations. The only major weakness of a mercury- wetted contact relay is the necessity to mount the relay within 30° of a vertical position, due to its position sensitivity. While there are several variations of the mercury-wetted contact relay on the market, the basic contact element has essential concepts in common. The mercury-wetted contact element consists of a glass-encapsulated nickel-iron reed with its base immersed in a pool of mercury. The free reed cantilever projects upward between sets of stationary contact electrodes, which have been glass-sealed in proper juxtaposition at the top of the glass chamber. The mercury is induced to flow up the cantilever by capillary action, wetting mercury on both the cantilever contact tip as well as the stationary contacts. Thus a mercury-to-mercury contact is maintained on both the normally-closed and normally-open contacts, and the system is self-replenishing. The 2-ampere mercury-wetted capsule is shown far left. Along with the inherent fast actuation of the capsule and excellent load-handling capacity, the mercury-wetted contacts exhibit extremely long life, as the mercury films re-establish at each closure and contact erosion is eliminated. Contact interface resistance is very low and 2 Ampere stable, and as the mercury films are elastic, contact bounce is eliminated. A dynamic Capsule sequence of the mercury-wetted contact action is shown below. While the below sequence portrays a Form D (make-before-break) contact action, a true Form C (break-before-make) contact can be provided by proper control of the mercury film dynamics and the contact electrode spacing. The mercury-wetted contact capsules generally are mounted within a coil assembly, and with appropriately mounted bias magnets, mounting base and magnetic shielded enclosures. The more popular assemblies contain one or two capsules in a convenient printed circuit mounting module. Mercury-wetted relays can be adjusted to operate with very low levels of input power, in the order of 10-20 milliwatts. Thus, power gain switching of as great as 10,000 can be realized. For all but very light contact loads, contact protection is required to limit the current or voltage rise time across the contacts. Form D Mercury-Wetted Contact Action As Seen In High-Speed Sequence (1) Mercury (shown in black) covers armature and contact points; (2) and (3) as armature moves from open to closed position, mercury filament joins both contacts momentarily; (4) ruptured mercury surfaces accelerate away from each other, providing rapid breaking action; (5) as contact surfaces join, mercury wetting dampens rebound, eliminates electrical chatter, and provides contact reliability. SPDT (Form C or Form D) Contact Specifications Material Rating (Switched Load) (Carry Load) Bridging and Transfer Time Contact Resistance Life Expectancy Mercury-wetted 2 amperes 5 amperes When operated by a single 14 milliohms typical; 1 billion platinum contacts maximum maximum DC pulse, the bridging or 20 milliohms maximum operations hermetically 500 volts maximum Not switched transfer time will be greater Stable within minimum sealed in an 100 VA maximum than 50 microseconds, but ±2 milliohms at rated load inert atmosphere less than 500 microseconds. throughout life. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 308 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Mercury-Wetted Relays Contact Protection The essentially infinite life of mercury-wetted contact relays may only be realized if the requirements for suitable contact protection are observed. In that the goal is control of the rate of rise of voltage across the contacts when the circuit is opened (rather than peak transient limiting), the only suitable protection recognized is an RC network. Values of R and C may be calculated using the formula shown, or may be obtained from the direct reading nomograph. Nomograph Explanation I=Steady state current at time of circuit opening E=Open circuit voltage Find I on the ordinate scale. Read C on the scale adjacent to I. R is found at the intersection of I and E. To reduce voltage transient amplitudes, C may be increased up to 10 times calculated values. (R must be calculated value.) For I=0.5 amps or less and E=50 volts or less R may be omitted C must be calculated value Resistor Tolerances ER Less than 70V R up to 2R 70V to 100V ±50% 100V to 150V ±10% Greater than 150V ±5% Specifications Parameter 159 Series 160 Series Coils Single Wound–max. ohms 8,600 9,000 Double Wound–max. ohms 4,275 4,500 Rating–Watts Continous 2.0 1.75 Temp. Rise–°C per watt 30° 35° Dielectric Breakdown–RMS, 60Hz 1,000 1,000 Insulation Resistance–Megohms–500 VDC 1,000 1,000 Capacitance–Armature to Coi pf, Typical 9.0 9.0 Electrostatic Shielding–Optional yes yes Typical Operate Times–mS, 2X Must Operate 1-3 1-3 Typical Release Times–mS, 2X 2.5 2.5 Contact Form Available Form C, D Form C, D Adjustments Available Single-side-stable yes yes Bi-stable yes yes Polar 1% Balance yes yes Temperature Range Operating °C All types – 38.8°C to + 85°C Storage °C All types – 65°C to + 100°C Weight–ounces 2.0 0.5 Encapsulant Polyurethane Polyurethane Mounting Method PCB PCB Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 309 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 159 series Mercury-Wetted Reed Relays Features Outline Dimensions 159 series relays are available in a Form C or Form D 2 amp contact arrangement, single or dual coil and printed circuit board terminals. Weight: 1.0 ounce Positive potential applied to the start of the winding indicated by the symbol will close the contacts shown open on the electrical schematics. For reset of bistable relays, reversed polarity must be applied. Wiring Diagrams Note: Relay must be mounted within 30° of vertical and suitable contact Single Coil Double Coil protection must be used. Part Numbering System Relay Series Enclosure And Terminals Contacts And Adjustment Coils Standard Or Special 160 1A-1Z–Single Coil 00–Standard 1–.625 Ht., .125 Lg. 1–1D Single-Side-Stable 2–.625 Ht., .156 Lg. 2K-2V–Double Coil A1-Z9–Special 2–1D Bistable 7A-7T–Single Coil Customer Requirement 3–.625 Ht., .187 Lg. 5–1C Single-Side-Stable 4–.625 Ht., .250 Lg. 8A-8Z–Bifilar Coil 6–1C Bistable 9A-9Z–Double Coil 7–1C Dynamic (1%) (Concentric) Balanced Bistable 1S and 2S–Special 0–Special 0–Special Example: 159-151N00 is a 159 series relay, enclosure height of .625 in., pin length of .125 in., Form C contact, single-side-stable adjustment, single coil 1N, of completely standard construction. Coil Characteristics and Part Numbers One Winding Single-Side-Stable 40 Milliwatts Part Number Coil Resistance Must Operate Must Operate Must Release Maximum Coils Voltage (VDC) Voltage (VDC) (Ohms) Current (MA-DC) Voltage (VDC) Form C Form D 1A 2.2 116 .28 .06 2.1 159-151A00 159-111A00 1B 3.9 86 .37 .07 2.8 159-151B00 159-111B00 1C 6.4 67 .47 .09 3.6 159-151C00 159-111C00 1D 9.0 60 .60 .12 4.3 159-151D00 159-111D00 1E 14 47 .72 .15 5.3 159-151E00 159-111E00 1F 24 35 .93 .19 6.9 159-151F00 159-111F00 1G 34 32 1.2 .24 8.2 159-151G00 159-111G00 1H 56 24 1.5 .30 11 159-151H00 159-111H00 1J 86 20 1.9 .39 13 159-151J00 159-111J00 1K 140 15 2.3 .46 17 159-151K00 159-111K00 1L 225 12 2.9 .59 21 159-151L00 159-111L00 1M 385 9.0 3.8 .73 28 159-151M00 159-111M00 1N 620 7.0 4.8 .95 35 159-151N00 159-111N00 1P 940 5.8 6.0 1.2 43 159-151P00 159-111P00 1Q 1,450 4.8 7.7 1.6 54 159-151Q00 159-111Q00 1R 2,430 3.6 9.7 2.0 70 159-151R00 159-111R00 1T 3,620 2.9 12 2.3 85 159-151T00 159-111T00 1U 5,500 2.5 15 3.0 105 159-151U00 159-111U00 1V 8,600 2.0 19 3.8 130 159-151V00 159-111V00 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 310 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 159 Series (continued) – Coil Characteristics and Part Numbers Two Windings Single-Side-Stable 80 Milliwatts Per Winding Part Number Must Operate Must Operate Must Release Maximum Dielectric Stand Coil Resistance Coils Current (MA-DC) Voltage (VDC) Voltage (VDC) Voltage (VDC) Off Between (Ohms) (Either Winding) (Either Winding) (Either Winding) (Either Winding) Form C Form D Coils (VDC) 2K 70/70 30 2.3 .47 12 500 159-152K00 159-112K00 2L 159-152L00 115/115 23 3.0 .60 15 500 159-112L00 2M 190/190 18 3.8 .79 19 400 159-152M00 159-112M00 2N 159-152N00 325/325 14 5.0 1.0 26 400 159-112N00 2P 490/490 12 6.2 1.3 31 400 159-152P00 159-112P00 2Q 730/730 9.6 7.7 1.6 38 400 159-152Q00 159-112Q00 2R 159-152R00 1250/1250 7.2 10 2.0 50 400 159-112R00 2T 1860/1860 5.8 12 2.5 61 200 159-152T00 159-112T00 2U 74 159-152U00 2760/2760 5.0 15 3.0 200 159-112U00 2V 4275/4275 3.9 18 3.8 92 200 159-152V00 159-112V00 Two Windings Single-Side-Stable 40 Milliwatts Per Winding 159-162K00 2K 70/70 15 .30 1.2 12 500 159-122K00 159-162L00 115/115 12 .37 1.5 15 159-122L00 2L 500 159-162M00 2M 190/190 9.0 .47 1.9 19 400 159-122M00 159-162N00 325/325 7.0 .62 2.5 26 400 159-122N00 2N 159-162P00 2P 490/490 5.8 .77 3.1 31 400 159-122P00 159-162Q00 2Q 730/730 4.8 .97 3.9 38 400 159-122Q00 159-162R00 1250/1250 3.6 1.2 5.0 50 400 159-122R00 2R 159-162T00 2T 1860/1860 3.0 1.5 6.0 61 200 159-122T00 159-162U00 2760/2760 2.5 1.8 7.5 74 200 159-122U00 2U 159-162V00 2V 4275/4275 2.0 2.3 9.2 92 200 159-122V00 Two Windings Bifilar Windings Bistable 40 Milliwatts Per Winding 159-168A00 8A 135/135 16 .48 2.4 16.4 500 159-128A00 159-168B00 170/170 15.5 .58 2.9 18.5 400 159-128B00 8B 159-168C00 8C 200/200 13.3 .58 2.9 20.0 400 159-128C00 159-168D00 310/310 11.9 .82 4.1 24.9 400 159-128D00 8D 159-168E00 8E 460/460 7.8 .80 4.0 30.3 400 159-128E00 159-168F00 8F 675/675 6.5 .96 4.8 36.7 400 159-128F00 159-168G00 810/810 6.85 1.2 6.1 40.2 400 159-128G00 8G 159-168H00 8H 1000/1000 6.75 1.5 7.4 44.7 400 159-128H00 159-168J00 1240/1240 5.6 1.4 7.0 49.8 400 159-128J00 8J 159-168K00 8K 2300/2300 3.82 1.9 9.7 67.8 200 159-128K00 Note: All values at 25°C. Resistances specified are ±10%. Maximum voltages based on 2 watts continuous dissipation. One Winding Single-Side-Stable 115 Milliwatts And Bistable 25 Milliwatts Single-Side-Stable Bistable Nominal Must Operate Must Operate Must Maximum Part Number Must Operate Must Operate Must Part Number Resistance Current Voltage Release Voltage Release Current Voltage (Ohms) Voltage Voltage (MA-DC) (VDC) (VDC) (MA-DC) (VDC) Form C Form D Form C Form D (VDC) (VDC) 159-167A00 159-127A00 18 66.6 1.3 .18 6.0 159-157A00 159-117A00 31.2 .62 .12 37.4 159-157B00 159-117B00 17.8 159-167B00 159-127B00 65 2.7 .36 11.4 .26 1.3 159-167C00 159-127C00 85 33.3 3.1 .42 13.0 159-157C00 159-117C00 15.6 .30 1.5 37.7 159-157D00 159-117D00 17.6 159-167D00 159-127D00 90 3.8 .51 13.4 .36 1.8 159-167E00 159-127E00 115 30.0 3.8 .51 15.1 159-157E00 159-117E00 14.0 .36 1.8 159-167F00 159-127F00 275 17.0 5.2 .77 23.4 159-157F00 159-117F00 8.0 .50 2.5 12.9 159-157G00 159-117G00 6.0 159-167G00 159-127G00 450 6.4 .85 30.0 .60 3.0 159-167H00 159-127H00 675 11.6 8.6 1.1 36.7 159-157H00 159-117H00 5.4 .80 4.0 10.1 159-157J00 159-117J00 4.7 159-167J00 159-127J00 940 10.5 1.4 43.3 .98 4.9 159-167K00 159-127K00 950 12.1 12.7 1.7 43.6 159-157K00 159-117K00 5.7 1.2 6.0 159-167L00 159-127L00 1250 9.4 12.9 1.8 50.0 159-157L00 159-117L00 4.4 1.2 6.1 8.3 159-157M00 159-117M00 3.9 159-167M00 159-127M00 1425 13 1.8 53.4 1.2 6.2 159-167N00 159-127N00 1800 9.4 18.6 2.6 60.0 159-157N00 159-117N00 4.4 1.7 8.8 7.5 159-157P00 159-117P00 3.5 159-167P00 159-127P00 1950 17.6 2.1 62.4 1.5 7.5 159-167Q00 159-127Q00 2400 7.35 20.6 2.6 69.2 159-157Q00 159-117Q00 3.4 1.8 9.0 5.55 159-157R00 159-117R00 2.6 159-167R00 159-127R00 4000 24.4 3.3 89.5 2.3 159-167T00 159-127T00 4000 17.6 2.4 89.5 159-157T00 159-117T00 1.9 1.6 8.3 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 311 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 160 series Mercury-Wetted Reed Relays Features Outline Dimensions 160 series relays are available in a single Form C or Form D two ampere contact arrangement, single or dual coil and printed circuit board terminals. The part numbers shown on the adjacent page are for relays with 0.093” terminal spacing. The part number designator for the 0.100” grid is a 160- 3XXXXX for a pin of 0.09” length, and 160-4XXXXX for a pin of 0.125” length. Positive potential applied to the start of the winding indicated by the symbol will close the contacts shown open on the electrical schematics. For reset of bistable relays, reversed polarity must be applied. Weight 0.5 ounces. UL File E55708 Note: Relay must be mounted within 30° of vertical and suitable contact protection must be used. Wiring Diagrams Grid 0.093 Grid 0.100 (160-1) (160-3) (160-2) (160-4) Single Coil Double Coil Part Numbering System Relay Series Enclosures And Terminals Contacts and Adjustments Standard or Special Coil 160 1–1D Single-Side-Stable 1–.090 Lg., .093 Grid 00–Standard 1A-1Z–Single Coil 2–1D Bistable A1-Z9–Special 2–.125 Lg., .093 Grid 2A-2Z–Double Coil 5–1C Single-Side-Stable 3–.090 Lg., .100 Grid Customer Requirement 6–1C Bistable 4–.125 Lg., .100 Grid 1S–Special Single Coil 7–1C Dynamic (1%) 2S–Special Double Coil Balanced Bistable 0–Special 0–Special Example: 160-151K00 is a 160 series relay, enclosure height of .400 in., pin length of .090 in., Form C contact, single-side-stable adjustment, single coil 1K, of completely standard construction. Coil Characteristics and Part Numbers Two Windings Bistable 20 Milliwatts Per Winding Part Number Must Operate Must Not Operate Must Operate Maximum Dielectric Standoff Coil Resistance Coil Voltage (VDC) Current (MA-DC) Voltage (VDC) Voltage (VDC) Between Coils (Ohms) Form C Form D (Either Winding) (Either Winding) (Either Winding) (One Winding Only) (VDC) 160-162K00 160-122K00 2K 60/60 17 .29 1.1 10 500 15 160-162L00 160-122L00 2L 90/90 .38 1.5 13 400 160-162M00 160-122M00 2M 155/155 11 .49 1.9 16 400 10 160-162N00 160-122N00 2N 205/205 .61 2.3 19 400 160-162P00 160-122P00 2P 340/340 7.5 .73 2.8 24 400 160-162Q00 160-122Q00 2Q 560/560 6.0 .98 3.6 31 400 4.7 160-162R00 160-122R00 2R 870/870 1.2 4.5 39 200 160-162T00 160-122T00 2T 1320/1320 3.8 1.4 5.5 48 200 3.2 160-162U00 160-122U00 2U 1980/1980 1.8 7.0 59 200 160-162V00 160-122V00 2V 3000/3000 2.7 2.3 9.0 73 200 2.1 160-162W00 160-122W00 2W 4500/4500 2.8 11.0 89 200 Note: All values at 25°C. Resistances specified are ±10%. Maximum voltages based on 1.75 watts continuous dissipation. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 312 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 160 Series (continued) – Coil Characteristics and Part Numbers One Winding Single-Side-Stable 40 Milliwatts Part Number Maximum Coil Resistance Must Operate Must Operate Must Release (Ohms) Voltage (VDC) Current (MA-DC) Voltage (VDC) Voltage (VDC) Form C Form D 160-151A00 160-111A00 113 .27 .05 2.0 2.2 160-151B00 160-111B00 103 .35 3.1 .07 2.3 160-151C00 160-111C00 90 .43 .08 2.8 4.4 160-151D00 160-111D00 80 .52 5.9 .10 3.2 160-151E00 160-111E00 49 .71 .14 4.8 13.0 160-151F00 160-111F00 43 .87 18.7 .18 5.7 160-151G00 160-111G00 36 1.1 27.7 .22 7.0 160-151H00 160-111H00 25 1.4 .28 9.4 50 160-151J00 160-111J00 23 1.8 70 .35 11 160-151K00 160-111K00 16 2.3 .46 15 125 160-151L00 160-111L00 14 2.9 185 .60 18 160-151M00 160-111M00 11 3.8 .77 24 325 160-151N00 160-111N00 10 4.6 435 .94 28 160-151P00 160-111P00 7.5 5.7 680 1.1 35 160-151Q00 160-111Q00 5.9 7.2 1.4 44 1,120 160-151R00 160-111R00 4.6 8.8 1,750 1.7 55 160-151T00 160-111T00 3.8 11 2.2 68 2,650 160-151U00 160-111U00 3.2 14 3,900 2.7 83 160-151V00 160-111V00 2.6 17 3.5 103 6,100 160-151W00 160-111W00 2.1 21 9,000 4.2 125 Two Windings Single-Side-Stable 80 Milliwatts Per Winding Part Number Must Operate Must Not Operate Must Operate Maximum Dielectric Standoff Coil Resistance Current (MA-DC) Voltage (VDC) Voltage (VDC) Voltage (VDC) Between Coils (Ohms) (Either Winding) (Either Winding) (Either Winding) (One Winding Only) (VDC) Form C Form D 160-152K00 160-112K00 60/60 33 2.2 .44 10 500 160-152L00 160-112L00 90/90 29 2.9 .58 13 400 160-152M00 160-112M00 155/155 22 3.7 .74 16 400 160-152N00 160-112N00 205/205 20 4.5 .92 19 400 160-152P00 160-112P00 340/340 15 5.6 1.1 24 400 160-152Q00 160-112Q00 560/560 10.8 7.9 1.3 31 400 160-152R00 160-112R00 870/870 9.3 9.0 1.8 39 200 160-152T00 160-112T00 1,320/1,320 7.5 11.0 2.2 48 200 160-152U00 160-112U00 1,980/1,980 6.4 14.0 2.8 59 200 160-152V00 160-112V00 3,000/3,000 5.3 18.0 3.5 73 200 160-152W00 160-112W00 4,500/4,500 4.2 21.0 4.2 89 200 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 313 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM V23026 (P1) series Miniature, Sealed PC Board Relay File E48393 File LR45064-5 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23°C Features Nominal Maximum Nominal Resistance Coil Number • Surface and through-hole mounting types. Voltage Operating Power (Ohms) Order Designation • 1 Form C contact arrangement. (VDC) Voltage (VDC) (mW) ± 10% (Step 4 in Ordering • Latching or non-latching versions available. Information chart) • Switches loads from dry circuit to 1 amp. Non-Latching — Through-Hole versions (A1) • Washable – meets IEC protection class IP67. • Low coil power requirement for IC compatibility. 1.5 4.5 63 36 7 • Terminals arranged on 0.1” grid. 3 8.8 66 137 6 2 5 14.5 67 370 1 • Designed for compact, high density mounting, 106.6mm surface area. 9 25.5 69 1,165 5 • Ideal for data and communication systems. 12 35 64 2,250 2 15 42 72 3,100 3 24 50 128 4,500 4 Contact Data @ 23°C Non-Latching — Surface-Mount versions (D1) Arrangements: 1 Form C (SPDT) bifurcated contacts. 1.5 4 80 28 7 Material & Style:Palladium-Nickel with Gold-Rhodium overlay. 3 8 80 113 6 Expected Mechanical Life: 1 billion operations. 5 13.3 80 313 1 Expected Electrical Life: 50 million ops. at 10mA, 12VDC; 9 24 80 1,013 5 10 million ops. at 100mA, 6VDC; 12 32 80 1,800 2 100,000 ops. at 1A, 30VDC. 15 40 80 2,813 3 Contact Ratings: 24 50 128 4,500 4 Maximum Switched Voltage: 125VDC, 150VAC. Bistable, Dual Coils — Through-Hole and Surface-Mount versions (B1,E1) Maximum Switched Current: 1A. (1) (values are the same for each coil) Maximum Carrying Current: 1A. 1.5 4.25 70 32 7 Maximum Switched Power: 30W (DC), 60VA (AC). 3 8.55 69 130 6 Minimum Switched Capability: 100μV. 5 14.75 64 390 1 UL/CSA Contact Ratings: 1A @ 30VDC; 9 14.75 68 1,200 5 460mA @ 65VDC; 12 29 96 1,500 2 460mA @ 150VAC. 15. 29 150 1,500 3 Initial Contact Resistance: 50 milliohms max. @ 10mA, 20mV. Bistable, Single Coil — Through-Hole and Surface-Mount versions (C1,F1) 1.5 6 37 61 5 3 13 30 300 6 High Frequency Data 5 20 34 740 1 Capacitance: Between Open Contacts: 5pF, max. 9 35 38 2,160 7 Between Coil and Contacts: 6pF, max. 12 50 32 4,500 2 RF Characteristics: Isolation at 100 / 900 MHz: -30.9 db / -18.0 db. 15. 50 50 4,500 3 Insertion loss at 100 / 900 MHz: -0.12 db / -1.9 db. 24 50 128 4,500 4 V. S. W. R. at 100 / 900 MHz: 1.06 db / 1.75 db. (1) The specified voltages apply with only one coil energized. Operate Data @ 23°C Must Operate Voltage: 75% of nominal voltage or less. Initial Dielectric Strength Must Release Voltage: 10% of nominal voltage or less. Between Open Contacts: 500V rms for 1 minute. Max. Continuous Thermal Load : 500mW. Between Contacts and Coil: 1,500V rms for 1 minute. Operate Time (Excluding Bounce)†: 1 ms, typ. Surge Voltage Resistance per Bellcore TR-NWT-001089 (2 / 10 μs): Operate Bounce Time†: 1 ms, typ. Between Open Contacts: 2,000V on request. Release Time (Excluding Bounce)†: 0.4 ms, typ. Between Coil and Contacts: 2,500V. Set Time (Latching)†: 1 ms, typ. Surge Voltage Resistance per FCC 68 (10 / 160 μs): Reset Time (Latching)†: 1 ms, typ. Between Open Contacts: 1,500V on request. Maximum Switching Rate: 200 operations/second. Between Coil and Contacts: 1,500V. † At or from Nominal Coil Voltage Note: Consult factory regarding availability of models meeting high surge Environmental Data resistance requirements between open contacts. Temperature Range: -40°C to +70°C. Vibration, Operational: 40g, 10-200 Hz; 20g, 200-2000 Hz. Initial Insulation Resistance Shock, Operational: 50g at 11 ms 1/2 sinusoidal impulse. 9 Resistance to Soldering Heat: 260°C for 10s. Internal relay temperature Between Mutually Insulated Conductors: 10 ohms @ 500VDC. should not exceed 210°C. Needle Flame Test: Application time 20s, burning time <15s. Coil Data @ 23°C Mechanical Data Voltage: 1.5 to 24VDC. Termination: Through-hole or surface mount printed circuit terminals. Thermal Resistance at Continuous Thermal Load: 130°K per Watt. Maximum Coil Temperature: 85°C. Enclosure Type: Immersion cleanable, plastic sealed case. Duty Cycle: Continuous. Weight: 0.063 oz. (1.8g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 314 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM Ordering Information Typical Part Number B V23026 A1 00 2 B201 1. Basic Series: V23026 = P1 Miniature, printed circuit board relay. 2. Termination: Non-Latching Dual Coil Latching Single Coil Latching Through-Hole A1 B1 C1 Surface Mount D1 E1 F1 Consult factory regarding availability of models meeting FCC Part 68/1500V surge requirement. 3. Function Type: 00 = Single Coil Non-Latching, Through-Hole terminals 02 = Single Coil Non-Latching, Surface-Mount terminals 05 = Single Coil Latching 10 = Dual Coil Latching 4. Coil Voltage: (1) (1) (2) 7 = 1.5VDC 6 = 3VDC 1 = 5VDC 5 = 9VDC 2 = 12VDC 3 = 15VDC 4 = 24VDC (1) For single coil latching versions only (C1, F1), 5 =1.5VDC and 7 = 9VDC (2) 24V coil not available on dual coil version 5. Contact Type: B201 = Bifurcated, 1 Form C (SPDT). *Consult factory for tape and reel packaging. Our authorized distributors are more likely to stock the following items for immediate delivery. V23026A1001B201 V23026D1021B201 V23026A1002B201 V23026D1022B201 V23026A1004B201 V23026D1024B201 Outline Dimensions Wiring Diagrams (Bottom Views) Through-Hole Single Coil Non-Latching & Single Coil Latching 1 3 5 .512 MAX. .30 MAX. + (13) (7.62) .272 MAX. (6.9) INDEX MARK - 10 8 .012 MAX. For non-latching versions, coil polarity must be observed. (.3) For single coil latching versions, polarity shown results in "set" condition. Reverse polarity results in "reset" condition. .138 MAX. Diagram indicates de-energized position for non-latching and "reset" position (3.5) for single coil latching. Surface Mount .31 MAX. .531 MAX. Dual Coil Latching (7.9) (13.5) 3 5 1 + .315 MAX. SET (8) .02 INDEX RESET (0.5) MARK - + .08 MAX. .016 Ş .008 Ş 8 6 10 .06 (2) (.4) 0°/8° (.2) (.15) .41 MAX. Diagram indicates relay in the "reset" position, with "reset" coil most recently (10.3) energized as shown. Energizing "set" coil as shown will transfer the contacts. PC Board Layouts (Bottom Views) Through-Hole Surface Mount .067 .100 TYP. (1.7) .05 .0315 DIA. ± .002 (2.54) (1.26) (.8 ± .05) .100 TYP. (2.54) INDEX MARK .3 (7.62) INDEX MARK .134 (3.4) .047 (1.2) .004 (.10) .047 .100 (1.2) (2.54) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 315 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG TSC series Miniature, Sealed PC Board Relay Telecommunications, Appliances, Office Machines UL File No. E82292 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20°C • Designed for thermostat, modem, computer peripherals, video TSC-L Sensitive recording and security applications. • 1 Form C contact arrangement. Rated Coil Nominal Coil Must Operate Must Release • Low coil power requirement for IC compatibility. Voltage Current Resistance Voltage Voltage • Terminals arrangement on grid pattern. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) 5 30.0 166 3.75 0.25 6 25.0 240 4.50 0.30 9 16.7 540 6.75 0.45 12 12.5 960 9.00 0.60 24 6.3 3,840 18.00 1.20 Contact Data @ 20°C Arrangements: 1 Form C (SPDT). TSC-D Standard Material: Gold overlay Silver Nickel Alloy. Rated Coil Nominal Coil Must Operate Must Release Max. Switching Rate: 300ops./ min. (no load). Voltage Current Resistance Voltage Voltage 30ops./ min. (rated load). (VDC) (mA) (ohms) ± 10% (VDC) (VDC) Expected Mechanical Life: 5 million ops (no load). 5 60.0 83 3.75 0.25 Expected Electrical Life: 100,000 ops (rated load). 6 50.0 120 4.50 0.30 Minimum Load: 1mA @ 1VDC. 9 33.4 270 6.75 0.45 Initial Contact Resistance: 50 milliohms @ 100mA, 6VDC. 12 25.0 480 9.00 0.60 24 12.5 1,920 18.00 1.20 Contact Ratings Ratings: 1A @ 24VDC resistive. 1A @ 120VAC resistive. Max. Switched Voltage: AC: 120V. DC: 30V. Max. Switched Current: 1A. Max. Switched Power: 120VA, 24W. Operate Data @ 20°C Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Initial Dielectric Strength Operate Time: 5ms max. Between Open Contacts: 400VAC, 50/60 Hz. (1 min.). Release Time: 5ms max. Between Contacts and Coil: 1,000VAC, 50/60 Hz. (1 min.). Note: Consult factory for higher dielectric version: 1,500VAC, 50/60 Hz. (1 min.). Surge Voltage Between Coil and Contacts: 1,500V FCC Part 68 (10/160μs). Environmental Data Initial Insulation Resistance Temperature Range: Operating: -40°C to +80°C. Between Mutually Insulated Conductors: 1,000Mohm @ 500VDCM. Vibration,Mechanical: 10 to 55Hz., 1.5mm double amplitude. Operational: 10 to 55Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 500m/s (50G approximately). 2 Operational: 100m/s (10G approximately). Coil Data Operating Humidity: 45 to 85% RH. (Non-condensing) Voltage: 5 to 24VDC. Duty Cycle: Continuous. Nominal Power: TSC-L: 150mW. TSC-D: 300mW. Mechanical Data Max. Coil Power: TSC-L: 140% of nominal at 70°C. TSC-D:115% of nominal at 70°C. Termination: Printed circuit terminals. Enclosure: Plastic sealed case. Weight: 0.1 oz (3g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 316 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B TSC -1 05 L 3 H ,000 1. Basic Series: TSC = Miniature relay 2. Termination: 1 = 1 pole 3. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12= 12VDC 4. Coil Input: L = Sensitive D = Standard 5. Contact Material: 3 = Silver Nickel 6. Enclosure: Blank = Vented (Flux-tight) cover H = Sealed plastic case 7. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to stock the following items for immediate delivery. TSC-105L3H,000 TSC-124L3H,000 TSC-112D3H,000 TSC-112L3H,000 TSC-105D3H,000 TSC-124D3H,000 Outline Dimensions Wiring Diagram (Bottom View) .390 ± .012 (9.9 ± .3) .138 (3.5) .016 .016 .020 (.4) (.4) (.5) .056 .300 .1 .012 .012 (1.43) PC Board Layout (Bottom View) (7.62) (2.54) (.3) .2 (.3) (5.08) .484 ± .012 6 – 0.31 DIA (12.3 ± .3) (.8) .2 (5.08) .29 ± .012 (7.4 ± .3) .1 .300 (2.54) (7.62) Reference Data Load Limit Curve Coil Temperature Rise Ambient Temp. & Operate Voltage 40 270 100 250 90 35 230 L type 0.15W 80 30 210 70 190 24.0 C ° 25 24W load limit curve 60 170 20 50 150 D type 0.30W 130 40 15 110 application field ° 80.0 C 30 10 90 20 70 5 Pick-Up Voltage (Cool Coil) 10 50 0 0 30 -30 -10 10 70 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 30 50 90 0.1 110 ° Coil Power (W) Ambient Temp. ( C) Contact Current (A) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 317 specified. Refer to inside back cover. Temp Rise (°C) of Supplying Voltage to Coil VDC Catalog 1308242 Issued 3-03 P&B T81N/T81H series Ultraminiature, High Density PC Board Relay File E29244 Features File LR48471 • Gold clad contacts in a 1 Form C contact arrangement. Users should thoroughly review the technical data before selecting a product • Standard 0.1" x 0.3" grid spacing in a DIP configuration. part number. It is recommended that user also seek out the pertinent • Standard or sensitive DC coils through 24 volts. approvals files of the agencies/laboratories and review them to ensure the • High dielectric strength. product meets the requirements for a given application. • Well suited for audio communications circuits, logic and process control, vending machines, thermostats and office automation applications. Coil Data @ 20°C • Immersion cleanable, plastic sealed case. Standard Coils Sensitive Coils • Quiet operation for security applications. Nominal Resistance Nominal Resistance Contact Data @ 20°C Voltage ±10% Voltage ±10% (VDC) (Ohms) (VDC) (Ohms) Arrangements: 1 Form C (SPDT). Material: Gold overlay silver-palladium alloy. 320 3 45 Ratings: 1 amp @ 24VDC, resistive; 0.5 amp @ 120VAC, resistive. 5 55 5 125 6 80 6 180 Max. Switching Current: 2A 9 180 9 400 Max. Switching Power: 60VA/24W. 12 320 12 700 Max. Switching Voltage: 120VAC/60VDC. 24 1,280 24 2,800 Expected Mechanical Life: 10 million operations. Expected Electrical Life: 150,000 ops. @ 1A, 24VDC, resistive. 100,000 ops. @ 1A, 120VAC, resistive. Operate Data @ 20°C Initial Contact Resistance: 50 milliohms, max., @ 100mA, 6VDC. Must Operate Voltage: 70% of nominal voltage or less. Surge Voltage: Must Release Voltage: 5% of nominal voltage or more. Between Coil and Contacts (10 x 160μs): 1,500V: (FCC Part 68). Operate Time (Excluding Bounce)†: Standard Coil : 5 ms, approx. Initial Dielectric Strength Sensitive Coil : 5 ms, approx. Release Time (Excluding Bounce)†: All Models: 2 ms, approx. Between Open Contacts: 500V rms, 50/60 Hz., for 1 minute. Contact to Coil: 1,000V rms, 50/60 Hz., for 1 minute. † At or from Nominal Coil Voltage. Initial Insulation Resistance Environmental Data 8 Between Mutually Insulated Conductors: 10 ohms @ 500VDC, 20°C Temperature Range: Standard Coil: -40°C to +55°C. and 65% relative humidity. Sensitive Coil: -40°C to +75°C. Coil Data @ 20°C Vibration: 0.059" (1.5mm) max. excursions for 10-40 Hz. Shock: Standard Coil: 10g for 11 ms. Voltage: 3 through 24VDC. Sensitive Coil: 6g for 11 ms. Nom. Power (Approx.): Std. Coil: 450 mW; Sensitive Coil: 200 mW. Maximum Power: Std. Coil: 800 mW.;Sensitive Coil: 640 mW. Mechanical Data Temperature Rise: Std. Coil: 105°C per watt, typ. Termination: Printed circuit terminals on 0.1" (2.54mm) centers. Sensitive Coil: 125°C per watt, typ. Maximum Coil Temperature: 105°C. Enclosure: Sealed PBT plastic case. Weight: 0.14 oz. (4g) approximately. Duty Cycle: Continuous. Outline Dimensions Ordering Information .429 MAX. Typical Part Number B T81H 5 D 312 -12 .626 MAX. (10.9) (15.9) 1. Basic Series: T81 = Ultraminiature, PC board relay. .460 .122 (11.7) (3.10) 2. Coil Sensitivity: N = Standard coil. H = Sensitive coil. 3. Contact Arrangement: 5 = 1 Form C (SPDT) 4. Coil Input: Wiring Diagram (Bottom View) D = DC Voltage. Terminals - #1 & 2 1 2 5. Dielectric Strength: .023 (0.6) X .018 (0.45) 3 = High dielectric strength, UL recognized. Terminals - #11 & 12 6. Contact Rating: .023 (0.6) X .016 (0.40) 1 = 1A @ 24VDC; 0.5A @ 120VAC. Terminal - #7 1 2 1 1 7 .008 (0.20) X .023 (0.6) 7. Contact Material: 2 = Gold overlay silver-palladium alloy. 8. Coil Voltage: PC Board Layout (Bottom View) 03 = 3VDC 06 = 6VDC 12 = 12VDC 05 = 5VDC 09 = 9VDC 24 = 24VDC 0.04 DIA. .299 (1.01) (7.6) Our authorized distributors are more likely to stock these items. T81H5D312-05 T81H5D312-12 T81N5D312-05 T81N5D312-24 .100 .397 T81H5D312-06 T81H5D312-24 T81N5D312-12 (2.54) (10.1) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 318 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OUAZ series Miniature, Sealed PC Board Relay Telecommunications, Appliances, Office Machines, Audio Equipment. UL File No. E82292 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features • Gold overlay silver palladium alloy contact suitable for low loads. OUAZ-D Standard • High density available on PC board due to small size. Rated Coil Nominal Coil Must Operate Must Release • 2.54mm terminal pitch same as I.C. socket terminal pitch. Voltage Current Resistance Voltage Voltage • Sensitive and standard coils available. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Immersion cleanable, sealed version available. 5 90.9 55 3.50 0.25 6 75.0 80 4.20 0.30 9 50.0 180 6.30 0.45 12 37.5 320 8.40 0.60 Contact Data @ 20°C 24 18.8 1,280 16.80 1.20 Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). OUAZ-L Sensitive Material: Gold overlay silver palladium. Max. Switching Rate: 300 ops./min. (no load). Rated Coil Nominal Coil Must Operate Must Release Voltage Current Resistance Voltage Voltage 30 ops./min. (rated load). (VDC) (mA) (ohms) ± 10% (VDC) (VDC) Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). 5 40.0 125 3.75 0.50 Minimum Load: 1mA @1VDC. 6 33.3 180 4.50 0.60 Initial Contact Resistance: 50 milliohms @ 100mA,6VDC. 9 22.5 400 6.75 0.90 12 17.0 700 9.00 1.20 24 8.6 2,800 18.00 2.40 Contact Ratings Operate Data Ratings: 1A @ 24VDC resistive, Must Operate Voltage: OUAZ-D: 70% of nominal voltage or less. 1A @ 120VAC resistive. OUAZ-L: 75% of nominal voltage or less. Max. Switched Voltage: AC: 120V. Must Release Voltage: OUAZ-D: 5% of nominal voltage or more. DC: 60V. OUAZ-L: 10% of nominal voltage or more. Max. Switched Current: 1A. Operate Time: OUAZ-D: 5 ms max. Max. Switched Power: 120VA, 30W. OUAZ-L: 10 ms max. Release Time: 7 ms max. Initial Dielectric Strength Environmental Data Between Open Contacts: 500VAC 50/60 Hz. (1 minute). Temperature Range: Between Coil and Contacts: 1,000VAC 50/60 Hz. (1 minute). Operating: OUAZ-D: -30°C to +60°C Surge Voltage Between Coil and Contacts: 1,500V FCC Part 68 OUAZ-L: -30°C to +75°C. (10/160μs). Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 500m/s (50G approximately). 2 Operational: 100m/s (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing) Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Coil Data Mechanical Data Voltage: 5 to 24VDC. Termination: Printed circuit terminals. Nominal Power: OUAZ-D: 450 mW. Enclosure (94V-0 Flammability Ratings): OUAZ-L: 200 mW. OUAZ-SS: Vented (Flux-tight), plastic cover. Coil Temperature Rise: OUAZ-D: 60°C max., at rated coil voltage. OUAZ-SH: Sealed, plastic case. OUAZ-L: 25°C max., at rated coil voltage. Weight: 0.12 oz. (3.5g) approximately. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 319 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OUAZ -SS -1 12 L M ,900 1. Basic Series: OUAZ = Miniature, sealed PC board relay. 2. Enclosure: SS = Vented (Flux-tight)*, plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 03 = 3VDC 06 = 6VDC 12 = 12VDC 05 = 5VDC 09 = 9VDC 24 = 24VDC 5. Coil Input: L = Sensitive D = Standard 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Suffix: ,900 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .441 ± .02 11.2 ± .5 .016 .018 .023 .008 (.40) (.6) (.45) .023 (.2) (.6) .409 ± .02 10.4 ± .5 PC Board Layout (Bottom View) .299 ± .008 5 – .04 DIA. 7.6 ± .2 (1.0) .063 .299 .098 ± .008 (1.6) (7.6) 2.5 ± .2 .40 ± .008 10.1 ± .2 .098 (2.5) .606 ± .02 15.4 ± .5 .397 (10.1) Reference Data Coil Temperature Rise Operate Time Life Expectancy 100 60 12 10 50 24VDC Resistive 8 40 120VAC Resistive 30 6 10 Operate Time 20 4 2 10 Release Time 1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.2 0.4 0.6 0.8 1.0 1.2 Coil Power (W) Coil Power (W) Contact Current (A) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 320 specified. Refer to inside back cover. Temp. Rise (°C) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 AXICOM IM series DPDT Slimline and Low Profile Telecom/Signal PC Board Relays File E111441 File 169679-1079886 16501-003 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 23°C • Through hole or surface mount terminals. Voltage: 1.5 to 24VDC. • Meets Bellcore GR 1089, FCC Part 68 and ITU-T K20. Nominal Power: 100mW for 1.5 - 12VDC latching models; • For applications in telecommunications, office automation, consumer 140mW for 1.5 - 12VDC non-latching models; electronics, medical equipment, measurement and control equipment. 200mW for all 24VDC models. • Immersion cleanable, plastic sealed case. Duty Cycle: Continuous. • 100mW coil for latching models, 140mW coil for non-latching. • Ultrasonic cleaning not recommended. Coil Data @ 23°C Nominal Operate/Set Range Minimum Resistance Part Voltage Minimum Maximum Release/Reset ±10% Number (VDC) Voltage Voltage Voltage (Ohms) (VDC) (VDC) (VDC) Non-latching 1 coil versions Contact Data @ 23°C (except as noted) 1.5 1.13 3.4 0.15 16 IM00 Arrangement: 2 Form C (DPDT) bifurcated contacts. 3 2.1 6.8 0.3 64 IM01 Material: Stationary: Palladium-Ruthenium, gold covered. 4.5 3.15 10.3 0.45 145 IM02 5 3.5 11.4 0.5 178 IM03 Ratings: Max. Switched Current: 2A. 6 4.2 13.7 0.6 257 IM04 Max. Carry Current: 2A (at max ambient temperature. 9 6.3 20.4 0.9 574 IM05 Max. Switched Voltage: 220VDC, 250VAC. 12 8.4 27.3 1.2 1,028 IM06 Max. Switched Power: 60W DC or 62.5VA AC. 24 16.8 45.6 2.4 2,880 IM07 UL/CSA Ratings: 250mA @ 250VAC; 2A @ 30VDC; Latching 1 coil versions 500mA @ 120VDC; 270mA @ 220VDC. Initial Contact Resistance: <70 milliohms @ 10mA / 20mV. 1.5 1.13 4.1 -1.13 23 IM40 Expected Mechanical Life: 100 million operations. 3 2.25 8.1 -2.25 90 IM41 Expected Electrical Life: 2.5 million operations @ 10mA / 30mVDC. 4.5 3.38 12.1 -3.38 203 IM42 2 million operations @ cable load open end. 5 3.75 13.5 -3.75 250 IM43 500,000 operations @ 240mA / 125VDC, res. 6 4.5 16.2 -4.5 360 IM44 500,000 operations @ 1A / 30VDC, res. 9 6.75 24.2 -6.75 810 IM45 100,000 operations @ 270mA / 220VDC, res. 12 9.0 32.3 -9.0 1,440 IM46 100,000 operations @ 2A / 30VDC, res. 24 18.0 41.9 -18.0 2,880 IM47 100,000 operations @ 250mA / 250VDC, res. Thermoelectric potential: <10μV. Operate Data @ 23°C High Frequency Data Operate and Release Voltage: See values in chart above. Operate Time (at nominal voltage): 1 ms, typ.; 3 ms, max. Capacitance: Between Open Contacts: 1pF, max. Reset Time [latching](at nominal voltage): 1 ms, typ.; 3 ms, max. Between Coil and Contacts: 2pF, max. Release Time [non-latching](without diode in parallel): 1 ms, typ.; 3 ms, Between Poles: 2pF, max. max. RF Characteristics: Isolation at 100 / 900 MHz: -37.0 db / -18.8 db. Release Time [non-latching](with diode in parallel): 3 ms, typ.; 5 ms, Insertion loss at 100 / 900 MHz: -0.03 db / -0.33 db. max. V. S. W. R. at 100 / 900 MHz: 1.06 db / 1.49 db. Bounce Time (at contact close): 1 ms, typ.; 5 ms, max. Maximum Switching Rate (no load): 50 operations/s. Environmental Data Temperature Range: -55°C to +85°C. Initial Dielectric Strength Maximum Allowable Coil Temperature: 125°C. Between Open Contacts: 1,000Vrms for 1 minute. Thermal Resistance: < 150K/W. Between Coil and Contacts: 1,800Vrms for 1 minute. Shock, half sinus, 11 ms: Functional: 50g. Between Poles: 1,000Vrms for 1 minute. Shock, half sinus, 0.5 ms: Destructive: 500g. Surge Voltage Resistance per Bellcore 1089 (2 / 10 μs), Vibration, 10-1000 Hz.: Functional: 20g. FCC 68 (10 / 160 μs) and IEC (10 / 700 μs): Needle Flame Test: Application Time 20s. Between Open Contacts: 1,500V. Resistance to Soldering: 260°C for 10s. Between Coil and Contacts: 2,500V. Between Poles: 1,500V. Mechanical Data Termination: Through-hole printed circuit terminals or gull-wing or J-leg surface mount printed circuit terminals. Mounting Position: Any. Initial Insulation Resistance Enclosure Type: Immersion cleanable (IP67) plastic case. Weight: 0.03 oz. (.75g) approximately. 9 Between Contact and Coil: 10 ohms or more @ 500VDC. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 321 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM U = Minimum voltage at 23° C after pre-energizing I with nominal voltage without contact current U = Maximum continous voltage at 23° II The operating voltage limits U and U depend on I II the temperature according to the formula: U =K · U I tamb I I 23° C and U =K · U II tamb Il Il 23° C t = Ambient temperature amb U = Minimum voltage at ambient temperature, t I tamb amb U = Maximum voltage at ambient temperature, t II tamb amb k , k = Factors (dependent on temperature), see diagram I II Ambient temperature t [°C] amb Ordering Information See "Part Number" column in Coil Data chart on previous page for available Packaging Information base part numbers in the IM series. For THT versions, add the suffix "TS" to the base part number. THT IM series relays are shipped in tubes of 50. There are 1,000 relays in a full carton. SMT IM series relays are shipped in reels of 1,000. There For gull-wing SMT versions, add the suffix "GR" to the base part number. For J-leg SMT versions, add the suffix "JR" to the base part number. are 1,000 or 5,000 relays in a full carton. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions SMT Version w/ Gull Wings SMT Version w/ J Legs THT Version .236 ± .003 .393 ± .003 .236 ± .003 .236 ± .003 .393 ± .003 .393 ± .003 (6 ± .08) (10 ± .08) (6 ± .08) (6 ± .08) (10 ± .08) (10 ± .08) .222 – .008 .222 – .008 .222 – .008 (5.65 – .2) (5.65 – .2) (5.65 – .2) .2 ± .004 T1 D1 D2 D2 D1 D2 D2 (5.08 ± .1) T2 .125 .2 ± .004 (3.2) D1 D2 D2 .015 .126 ± .006 .015 .110 ± .007 .295 ± .011 .126 ± .006 D1= (5.08 ± .1) D1= T1= .015 (.4) (3.2 ± .15) (.4) (2.8 ± .2) (7.5 ± .3) (3.2 ± .15) .126 ± .006 (.4) D1= (3.2 ± .15) .087 ± .006 .087 ± .006 .2 ± .004 D2= D2= T2= (2.2 ± .15) (2.2 ± .15) (5.08 ± .1) .087 ± .006 D2= (2.2 ± .15) PC Board Layout (Bottom View) Solder Pad Layout (Bottom Views) Wiring Diagram (Bottom View) SMT Version w/ Gull Wings SMT Version w/ J Legs THT Version .126 .087 .087 .087 .087 .126 (3.2) (2.2)(2.2) .126 .087 .087 (2.2)(2.2) (3.2) (3.2) (2.2)(2.2) .018 ± .006 .2 ± .006 .315 (.46 ± .15) .094 .252 .236 .173 (5.08 ± .15) .157 (8) (2.4) (6.4) (6) (4.4) (4) .030 (.75) DIA. .047 ± .006 .047 ± .006 .028 ± .004 MIN. (1.2 ± .15) (1.2 ± .15) (.7 ± .1) .047 ± .006 .028 ± .004 (1.2 ± .15) (.7 ± .1) Recommended Soldering Conditions (according to CECC 00802) Vapor Phase Soldering: Temperature/Time Profile Infrared Soldering: Temperature/Time Profile (Lead Temperature) (Lead Temperature) 10 sec 20-40 sec max. 245°C 215°C 215°C ca. 40 sec 180°C 180°C 130°C 130°C forced external preheating cooling 100°C Solid Line: Typical Dotted Line: Process Limits Solid Line: Typical Dotted Line: Process Limits Time (s) Time (s) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 322 specified. Refer to inside back cover. Temperature °C Temperature °C Catalog 1308242 Issued 3-03 AXICOM FP2 series DPDT Low Profile Telecom/Signal PC Board Relays File E111441 File 169679-1079886 16501-003 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23°C Features Nom. Operate/Set Range Minimum Nom. Resis- Part • Through hole PC board terminals. Voltage Min. Max. Release/Reset Power tance Number • Meets FCC Part 68 and ITU-T K20. (VDC) Voltage Voltage Voltage (mW) ±10% • For applications in telecommunications, office automation, consumer (VDC) (VDC) (VDC) (Ohms) electronics, medical equipment, measurement and control equipment. Non-latching 1 coil versions • Immersion cleanable, plastic sealed case. 3 2.1 6.8 0.3 140 64 D3006 • 80mW coil for high sensitivity models, 140mW coil for sensitive types. 4.5 3.15 10.3 0.45 140 145 D3004 • Ultrasonic cleaning not recommended. 5 3.5 11.4 0.5 140 178 D3009 6 4.2 13.7 0.6 140 257 D3005 9 6.3 20.4 0.9 140 574 D3010 Contact Data @ 23°C (except as noted) 12 8.4 27.3 1.2 140 1,028 D3002 Arrangement: 2 Form C (DPDT) bifurcated contacts. 24 16.8 45.7 2.4 200 2,880 D3012 Material: Stationary: Silver-nickel, gold covered. 48 33.6 67.5 4.8 300 7,680 D3013 Ratings: Max. Switched Current: 2A. Non-latching, sensitive 1 coil versions Max. Carry Current: 2A (at max ambient temperature. 3 2.25 9.0 0.3 80 113 D3021 Max. Switched Voltage: 125VDC, 250VAC. 4.5 3.38 13.5 0.45 80 253 D3022 Max. Switched Power: 30W DC or 62.5VA AC. 5 3.75 15.0 0.5 80 313 D3023 UL/CSA Ratings: 500mA @ 50VDC; 1.25A @ 30VDC; 6 4.5 18.0 0.6 80 450 D3024 500mA @ 50VAC. 9 6.75 27.1 0.9 80 1,013 D3025 Initial Contact Resistance: <70 milliohms @ 10mA / 20mV. 12 9.0 36.1 1.2 80 1,800 D3026 Expected Mechanical Life: 100 million operations. 24 18.0 54.7 2.4 140 4,114 D3027 Expected Electrical Life: 2.5 million operations @ 10mA / 30mVDC. 48 36.0 72.5 4.8 260 8,882 D3028 2 million operations @ cable load open end. Latching 1 coil versions 100,000 operations @ 240mA / 125VDC. 3 2.25 8.1 -2.25 100 90 D3041 100,000 operations @ 250mA / 250VDC. 4.5 3.375 12.1 -3.375 100 203 D3042 100,000 operations @ 1.25A / 24VDC. 5 3.75 13.5 -3.75 100 250 D3043 Thermoelectric potential: <10μV. 6 4.5 16.2 -4.5 100 360 D3044 9 6.75 24.2 -6.75 100 810 D3045 12 9.0 29.0 -9.0 100 1,440 D3046 24 18.0 47.5 -18.0 150 3,840 D3047 High Frequency Data Latching 2 coil versions Capacitance: Between Open Contacts: 1pF, max. 3 2.1 5.7 2.1 200 45 D3061 Between Coil and Contacts: 4pF, max. 4.5 3.15 8.6 3.15 200 101 D3062 Between Poles: 1pF, max. 5 3.5 9.5 3.5 200 125 D3063 RF Characteristics: Isolation at 100 / 900 MHz: -40.2 db / -22.3 db. 6 4.2 11.4 4.2 200 180 D3064 Insertion loss at 100 / 900 MHz: -0.03 db / -0.25 db. 9 6.3 17.1 6.3 200 405 D3065 V. S. W. R. at 100 / 900 MHz: 1.01 db / 1.07 db. 12 8.4 22.6 8.4 200 720 D3066 24 16.8 33.7 16.8 200 1,920 D3067 Initial Dielectric Strength Between Open Contacts: 700Vrms for 1 minute. Operate Data @ 23°C Between Coil and Contacts: 1,000Vrms for 1 minute. Operate and Release Voltage: See values in chart above. Between Poles: 1,000Vrms for 1 minute. Operate Time (at nominal voltage): 3 ms, typ.; 4 ms, max. Surge Voltage Resistance per FCC 68 (10 / 160 μs) and Reset Time [latching](at nominal voltage): 3 ms, typ.; 4 ms, max. IEC (10 / 700 μs): Release Time [non-latching](w/o diode in parallel): 1 ms, typ.; 3 ms, max. Between Open Contacts: 1,500V. Release Time [non-latching](with diode in parallel): 3 ms, typ.; 4 ms, max. Between Coil and Contacts: 1,500V. Bounce Time (at contact close): 1 ms, typ.; 5 ms, max. Between Poles: 1,500V. Maximum Switching Rate (no load): 50 operations/s. Initial Insulation Resistance Environmental Data 9 Between Contact and Coil: 10 ohms or more @ 500VDC. Temperature Range: -55°C to +85°C. Maximum Allowable Coil Temperature: 110°C. Coil Data @ 23°C Thermal Resistance: < 185K/W. Shock, half sinus, 11 ms: Functional: 50g. Voltage: 3 to 48VDC. Shock, half sinus, 11 ms: Destructive: 1,500g. Nominal Power: 80-300mW depending on models. See coil data tables. Vibration, 10-500 Hz.: Functional: 20g. Duty Cycle: Continuous. Needle Flame Test: Application Time 20s. Resistance to Soldering: 260°C for 10s. Mechanical Data Termination: Through-hole printed circuit terminals. Mounting Position: Any. Enclosure Type: Immersion cleanable (IP67) plastic case. Weight: 0.08 oz. (2g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 323 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM U = Minimum voltage at 23° C after pre-energizing I with nominal voltage without contact current U = Maximum continous voltage at 23° II The operating voltage limits U and U depend on I II the temperature according to the formula: U =K · U I tamb I I 23° C and U =K · U II tamb Il Il 23° C t = Ambient temperature amb U = Minimum voltage at ambient temperature, t I tamb amb U = Maximum voltage at ambient temperature, t II tamb amb k , k = Factors (dependent on temperature), see diagram I II Ambient temperature t [°C] Ordering Information amb See "Part Number" column in Coil Data chart on previous page for available Packaging Information part numbers in the FP2 series. FP2 series relays are shipped in tubes of 50. There are 1,000 relays in a full carton. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions PC Board Layout (Bottom View) .1 (2.54) .35 ± .003 .574 ± .003 (9.02 ± .08) .1 (14.2 ± .08) (2.54) .196 ± .004 .0275 ± .004 (5 ± .1) (.7 ± .1) .3 (7.62) .009 ± .002 .02 (.25 ± .05) (.5) .3 ± .004 .125 ± .011 .076 ± .004 (7.62 ± .1) .0335 DIA. MIN. (3.2 ± .3) (1.93 ± .1) (.85) Wiring Diagrams (Bottom Views) Non-Latching and Latching, 1 Coil Latching, 2 Coil Reset Condition Release or Reset Condition Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 324 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM V23079 (P2) series 5 Amp Switching, High Dielectric DPDT Polarized FCC Part 68 PC Board Relay File E48393 File LR45064 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 23°C • Surface and through hole mounting types. Voltage: 3-24V. • Breakdown voltage between contacts and coil: 1,500Vrms. Nominal Power: 70mW-140mW, dependent on model. See chart below. • Surge withstand between contacts and coil: 2,500V (Bellcore). Operating Range @ 23°C@ 85°C • High capacity contact: 2A @ 30VDC. Nominal Must Operate Max. Max. Coil • 2 Form C contact arrangement. Voltage Voltage Voltage Voltage Resistance • Board space saving, vertical mount (14.6 x 7.2mm surface area). (VDC) (VDC) (VDC) (VDC) @ 23°C • Immersion cleanable, plastic sealed case. Non-Latching, 140mW Nominal Power • Single and dual coil latching versions available. 3 2.25 6.5 3.4 64.3 ± 6 • Basic insulation (coil-to-contact) according to EN 60950 / UL 1950. 4.5 3.375 9.8 5.1 145 ± 15 • Ultrasonic cleaning is not recommended. 5 3.75 10.9 5.7 178 ± 18 6 4.50 13.0 6.8 257 ± 26 9 6.75 19.6 10.3 578 ± 58 Contact Data @ 23°C 12 9.0 26.1 13.8 1,029 ± 103 Arrangement: 2 Form C (DPDT) bifurcated contacts. 24 18.0 52.3 27.7 4,114 ± 411 Material: Gold overlay on silver nickel. Single Coil Latching, 70mW Nominal Power Rating: 3 2.25 9.2 4.8 128 ± 13 Max. Switching Voltage: 250VAC, 220VDC. 4.5 3.375 13.8 7.3 289 ± 29 Max. Switching Current: 5A. 5 3.75 15.3 8.1 357 ± 36 Max Carrying Current: 2A. 6 4.5 18.5 9.8 514 ± 51 Max Switching Power: 60W, DC; 62.5VA, AC. 9 6.75 27.7 14.6 1,157 ± 116 Min. Permissible Load: 100μV. 12 9.0 37.0 19.6 2,057 ± 206 UL/CSA Rating: 1A @ 30VDC; 300mA @ 110VDC; 24 18.0 74.0 39.2 8,228 ± 823 500mA @ 120VAC; 250mA @ 240VAC. Dual Coil Latching, 140mW Nominal Power Expected Mechanical Life: Approx. 100 million ops. 3 2.25 6.5 – 64.3 ± 6 Expected Electrical Life: 50 million ops. @ 10mA, 12V, 4.5 3.375 9.8 – 145 ± 15 10 million ops. @ 100mA, 6V. 5 3.75 10.9 – 178 ± 18 1 million ops. @ 1A, 30V, 6 4.5 13.0 – 257 ± 26 500,000 ops. @ 500mA, 60V. 9 6.75 19.6 – 578 ± 58 200,000 ops. @ 2A, 30V. 12 9.0 26.1 – 1,029 ± 103 Initial Contact Resistance: 50 milliohms @ 10mA, 20mV. 24 18.0 52.3 – 4,114 ± 411 Thermoelectric potential: <10μV. Operate Data @ 23°C High Frequency Data Must Operate Voltage: 75% of nominal or less. Capacitance: Between Open Contacts: 2pF, max. Must Release Voltage: 10% of nominal or more. Between Coil and Contacts: 1.5pF, max. Operate Time (at nominal voltage): 3 ms, typ.; 5 ms, max. Between Poles: 1pF, max. Reset Time (at nominal voltage): 3 ms, typ.; 5 ms, max. RF Characteristics: Isolation at 100 / 900 MHz: -39.0 db / -20.7 db. Release Time (non-latching w/o diode in parallel): 2 ms, typ.; 4 ms, max. Insertion loss at 100 / 900 MHz: -0.02 db / -0.27 db. Release Time (non-latching with diode in parallel): 4 ms, typ.; 6 ms, max. V. S. W. R. at 100 / 900 MHz: 1.04 db / 1.40 db. Bounce Time (at contact close): 1 ms, typ.; 3 ms, max. Maximum Switching Rate (no load): 50 operations/s. Initial Dielectric Strength Between Open Contacts: 1,000Vrms for 1 minute. (1,500Vrms on Environmental Data request, consult factory for availability). Temperature Range: -40°C to +85°C. Between Coil and Contacts: 1,500Vrms for 1 minute. (single coil relay). Maximum Allowable Coil Temperature: 110°C. Between Poles: 1,000Vrms for 1 minute. Thermal Resistance: < 165K/W. Surge Voltage Resistance per Bellcore TR-NWT-001089 (2 / 10 μs): Shock, half sinus, 11 ms: Functional: 50g. Between Open Contacts: 2,000V. Shock, half sinus, 11 ms: Destructive: 150g. Between Coil and Contacts: 2,500V (single coil relay). Vibration, 10-1,000 Hz.: Functional: 35g. Between Poles: 2,500V. Needle Flame Test: Application time 20s, burning time <15s. Surge Voltage Resistance per FCC 68 (10 / 160 μs): Resistance to Soldering Heat: 260°C for 10s. Between Open Contacts: 1,500V. Between Coil and Contacts: 1,500V (single coil relay). Between Poles: 1,500V. Mechanical Data Termination: Through hole or surface mount printed circuit terminals. Mounting Position: Any. Initial Insulation Resistance Enclosure: Immersion cleanable (IP67) plastic case. 9 Between Mutually Insulated Conductors: 10 ohms @ 500VDC. Weight: .084 oz. (2.5g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 325 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM Ordering Information Typical Part Number B V23079 A10 01 B301 1. Basic Series: V23079 = P2 Miniature, printed circuit board relay. 2. Termination: Non-Latching Normal Ht. Non-Latching Reduced Ht. Dual Coil Latching Single Coil Latching (1) Through-Hole A10 A20 B12 C11 (1) SMT Extended Terminal D10 D20 E12 F11 (1) SMT Short Terminal G10 G20 H12 J11 3. Coil Voltage: (2) 08 = 3VDC 11 = 4.5VDC 01 = 5VDC 02 = 6VDC 06 = 9VDC 03 = 12VDC 05 = 24VDC 4. Contact Type: B301 = Bifurcated, 2 Form C (DPDT), Silver Nickel. (1) Reduced mounting height of 10.0 mm, as opposed to 10.4 mm (SMT) or 9.6 mm as opposed to 9.9 (through-hole). Non-latching only, not available with 24V coil. (2) Not available with Termination A20, D20 or G20. Our authorized distributors are more likely to stock the following items for immediate delivery. V23079A1001B301 V23079A1011B301 V23079A2011B301 V23079D1005B301 V23079D2003B301 V23079A1003B301 V23079A2001B301 V23079D1001B301 V23079D1011B301 V23079D2011B301 V23079A1005B301 V23079A2003B301 V23079D1003B301 V23079D2001B301 Outline Dimensions Wiring Diagrams (Bottom Views) THT Single Coil Latching* and Dual Coil SMT .57 MAX. .28 MAX. .59 MAX. .295 MAX. Single Coil Non-latching** Latching*** (14.5) (7.2) (7.5) (15) 1 34 5 6 1 34 5 .039 MAX. .022 + + (1.0) .39 + (.56) (9.9) .41 MAX. .018 MAX. (10.4) (0.45) 4° ± 2 .122 MAX. - - - (3.1) .217 ± .006 .020 ± .002 12 10 9 8 7 12 10 9 8 (5.52 ± 0.15) (0.5 ± 0.05) .29 ± .006 Short ORIENTATION MARK ORIENTATION MARK (7.4 ± 0.15) terminals (ON TOP OF RELAY) (ON TOP OF RELAY) Note: Mounting height varies dependent upon Termination type .37 ± .006 Extended selected in step 2 of Ordering Information (9.4 ± 0.15) Note: All diagrams shown in de-energized or reset position. terminals *Note: For non-latching versions, coil polarity must be observed. **Note: For single coil latching versions, polarity shown results in "set" condition. Reverse polarity results in "reset" condition. Coil Limits ***Note: The contact position illustrated shows the reset condition. If a positve potential is applied to terminal 1 or 7, the relay U = Minimum voltage at 23° C after pre-energizing 1.3 I adopts the set position. with nominal voltage without contact current 1.2 U = Maximum continous voltage at 23° II 1.1 The operating voltage limits U and U depend on I II PC Board Layout (Bottom View) the temperature according to the formula: 1.0 .100 TYP. .100 TYP. U =K · U 0.9 (2.54) (2.54) I tamb I I 23° C and 0.8 134 5 6 .200 U =K · U THT II tamb Il Il 23° C (5.08) 12 10 9 8 7 t = Ambient temperature amb 0.7 U = Minimum voltage at ambient temperature, t I tamb amb .037 .039 MAX. U = Maximum voltage at ambient temperature, t (0.95) 0.6 (1.0) II tamb amb k , k = Factors (dependent on temperature), see I II .59 SMT 0.5 .045 diagram extended (15) (1.15) terminals 0.4 -40 -20 0 20 40 60 80 100 .43 3 Ambient Temperature, t [°C] ----- > 1546 SMT amb .295 .204 .35 (10.9) (7.5) (5.2) (8.9) (Solder Pad) 12 1097 8 Packaging Information .10 THT P2 relays are shipped in tubes of 50. There are 2,000 relays in a carton. SMT P2 relays with (2.54) SMT .004 long terminals are shipped in reels of 400, with 2,000 relays in a carton. SMT P2 relays with short .035± .004 (.10) short terminals are shipped in reels of 500. There are 2,500 relays in a full carton. terminals (0.9±0.1) Recommended Soldering Conditions (according to CECC 00802) Vapor Phase Soldering: Temperature/Time Profile Infrared Soldering: Temperature/Time Profile (Lead Temperature) (Lead Temperature) 10 sec 20-40 sec max. 245°C 215°C 215°C ca. 40 sec 180°C 180°C 130°C 130°C forced external 100°C Solid Line: Typical Solid Line: Typical Time (s) Time (s) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 326 specified. Refer to inside back cover. Temperature °C Temperature °C SET RESET Catalog 1308242 Issued 3-03 AXICOM FT2/FU2 series DPDT Slim Package Telecom/Signal PC Board Relays File E111441 File 176679-1079886 16504-002 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23°C Features Nom. Operate/Set Range Minimum Nom. Resis- Coil & • Through hole PC board terminals. Voltage Min. Max. Release Power tance Sensitivity • High-dielectric (>5,000 V contact-to-coil surge) version available. (VDC) Voltage Voltage Voltage (mW) ±10% Code • Meets Bellcore GR 1089 and FCC Part 68 and ITU-T K20. (VDC) (VDC) (VDC) (Ohms) • For applications in telecommunications, office automation, consumer Sensitive versions electronics, medical equipment, measurement and control equipment. 3 2.25 4.2 0.3 200 45 21 • Immersion cleanable, plastic sealed case. 4 3.0 5.7 0.4 200 114 29 • Standard or sensitive coils for 3 - 48 VDC. 4.5 3.38 6.4 0.45 200 101 22 • Ultrasonic cleaning not recommended. 5 3.75 7.1 0.5 200 125 23 Contact Data @ 23°C (except as noted) 6 4.5 8.5 0.6 200 180 24 9 6.75 12.7 0.9 200 405 25 Arrangement: 2 Form C (DPDT) bifurcated contacts. 12 9.0 17.0 1.2 200 720 26 Material: Stationary: Silver-nickel, gold-covered or palladium-ruthenium, 24 18.0 33.9 2.4 240 2,400 27 gold-covered. 48 36.0 67.9 4.8 240 9,600 28 Contact Ratings: Silver-nickel Palladium-ruthenium Standard versions Max. Switched Current: 2A 2A. 3 2.25 5.2 0.3 300 30 01 Max. Carry Current: 1.25A 2A 4.5 3.38 7.8 0.45 300 68 02 (at max ambient temp.) 5 3.75 8.7 0.5 300 83 03 Max. Switched Voltage: 125VDC, 250VAC 220VDC, 250VAC. 6 4.5 10.4 0.6 300 120 04 Max. Switched Power: 30W DC, 62.5VA AC 60W DC, 62.5VA AC. 9 6.75 15.6 0.9 300 270 05 UL/CSA Contact Ratings: 1.25A @ 125VDC; 1.25A @ 125VAC. 12 9.0 20.8 1.2 300 480 06 Initial Contact Resistance: <70 milliohms @ 10mA / 20mV. 24 18.0 40.8 2.4 300 1,920 07 Expected Mechanical Life: 100 million operations. 48 36.0 81.6 4.8 300 768 08 Expected Electrical Life: 2.5 million operations @ 10mA / 12VDC. High dielectric versions 2 million operations @ cable load open end. 3 2.25 4.2 0.3 200 45 91 100,000 operations @ 250mA / 125VDC, res. 5 3.75 7.1 0.5 200 125 93 100,000 operations @ 250mA / 250VDC, res. 12 9.0 17.0 1.2 200 720 96 100,000 operations @ 1.25A / 24VDC, res. 24 18.0 33.9 2.4 240 2,400 97 Thermoelectric potential: <10μV. Part Number Structure High Frequency Data Capacitance: Between Open Contacts: 1pF, max. Between Coil and Contacts: 4pF, max. Between Poles: 1pF, max. RF Characteristics: Isolation at 100 / 900 MHz: -30.6 db / -13.7 db. Insertion loss at 100 / 900 MHz: -0.02 db / -0.50 db. V. S. W. R. at 100 / 900 MHz: 1.02 db / 1.27 db. Initial Dielectric Strength Standard Model Between Open Contacts: 1,500Vrms for 1 minute. Between Coil and Contacts: 1,500Vrms for 1 minute. Between Poles: 1,500Vrms for 1 minute. Operate Data @ 23°C Surge Voltage Resistance per Bellcore TR-NWT-001089 (2 / 10 μs) and Operate and Release Voltage: See values in chart above. FCC 68 (10 / 160 μs): Operate Time (at nominal voltage): 3 ms, typ.; 5 ms, max. Between Open Contacts: 2,500V. Release Time (w/o diode in parallel): 2 ms, typ.; 5 ms, max. Between Coil and Contacts: 1,500V. Release Time (with diode in parallel): 4 ms, typ.; 5 ms, max. Between Poles: 1,500V. Bounce Time (at contact close): 1 ms, typ.; 5 ms, max. High-Dielectric Model Maximum Switching Rate (no load): 50 operations/s. Between Open Contacts: 3,500Vrms for 1 minute. Between Coil and Contacts: 1,800Vrms for 1 minute. Environmental Data Between Poles: 1,800Vrms for 1 minute. Temperature Range: -55°C to +85°C. Surge Voltage Resistance per Bellcore TR-NWT-001089 (2 / 10 μs) and Maximum Allowable Coil Temperature: 125°C. FCC 68 (10 / 160 μs): Thermal Resistance: < 165K/W. Between Open Contacts: 5,000V. Shock, half sinus, 11 ms: Functional: 15g. Between Coil and Contacts: 2,500V. Shock, half sinus, 11 ms: Destructive: 500g. Between Poles: 2,500V. Vibration, 10-500 Hz.: Functional: 10g. Needle Flame Test: Application Time 20s. Initial Insulation Resistance Resistance to Soldering: 260°C for 10s. 9 Between Contact and Coil: 10 ohms or more @ 500VDC. Mechanical Data Coil Data @ 23°C Termination: Through-hole printed circuit terminals. Voltage: 3 to 48VDC. Mounting Position: Any. Nominal Power: 200-300mW, depending on model. See coil data tables. Enclosure Type: Immersion cleanable (IP67) plastic case. Duty Cycle: Continuous. Weight: 0.12 oz. (3g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 327 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM U = Minimum voltage at 23° C after pre-energizing I with nominal voltage without contact current U = Maximum continous voltage at 23° II The operating voltage limits U and U depend on I II the temperature according to the formula: U =K · U I tamb I I 23° C and U =K · U II tamb Il Il 23° C t = Ambient temperature amb U = Minimum voltage at ambient temperature, t I tamb amb U = Maximum voltage at ambient temperature, t II tamb amb k , k = Factors (dependent on temperature), see diagram I II Ambient temperature t [°C] Ordering Information amb See "Part Number Structure" chart on previous page for available part Packaging Information numbers in the FT2/FU2 series. FT2 relays are shipped in tubes of 50. There are 1,000 relays in a carton. FU2 relays with long terminals are shipped in reels of 400, with 2,000 relays in a carton. FU2 relays with short terminals are shipped in reels of 500. There are 2,500 relays in a full carton. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions SMT Version w/ Short Terminals THT Version SMT Version w/ Long Terminala .295 ± .005 .295 ± .005 .296 ± .005 .590 ± .005 .590 ± .005 .590 ± .005 (7.5 ± .05) (7.5 ± .05) (7.6 ± .05) (15.0 ± .05) (15.0 ± .05) (15.0 ± .05) .013 ± .001 .377 ± .001 .393 ± .006 .393 ± .006 (.35 ± .03) (9.6 ± .03) (10.0 ± .15) (10.0 ± .15) .2 .2 (5.08) (5.08) .2 .02 .02 (5.08) (.5) .362 ± .008 (.5) .295 ± .008 .02 .129 ± .011 (9.2 ± .2) (7.5 ± .2) (.5) (3.3 ± .3) PC Board Layout (Bottom View) Solder Pad Layout (Bottom Views) Wiring Diagram (Bottom View) SMT Version w/ Short THT Version SMT Version w/ Long Terminals Terminals .1 (2.54) 4 X .1 4 X .1 (2.54) (2.54) .0476 (1.21) .1 .35 .397 .2 (2.54) .2 (8.9) (10.9) (5.2) (5.2) .035 ± .0004 .045 .035 ± .0004 .0439 .045 .0335 DIA. MIN. (0.9 ± .01) (1.15) (0.9 ± .01) (1.115) (1.15) (.85) Recommended Soldering Conditions (according to CECC 00802) Vapor Phase Soldering: Temperature/Time Profile Infrared Soldering: Temperature/Time Profile (Lead Temperature) (Lead Temperature) 10 sec 20-40 sec max. 245°C 215°C 215°C ca. 40 sec 180°C 180°C 130°C 130°C forced external preheating cooling 100°C Solid Line: Typical Dotted Line: Process Limits Solid Line: Typical Dotted Line: Process Limits Time (s) Time (s) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 328 specified. Refer to inside back cover. Temperature °C Temperature °C Catalog 1308242 Issued 3-03 AXICOM FX2 series DPDT Slim Package Telecom/Signal PC Board Relays File E111441 File 176679-1079886 16504-002 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23°C Features Nom. Operate/Set Range Minimum Nom. Resis- Part • Through hole PC board terminals. Voltage Min. Max. Release/Reset Power tance Number • Meets Bellcore GR 1089 and FCC Part 68. (VDC) Voltage Voltage Voltage (mW) ±10% • For applications in telecommunications, office automation, consumer (VDC) (VDC) (VDC) (Ohms) electronics, medical equipment, measurement and control equipment. Non-latching 1 coil versions • Immersion cleanable, plastic sealed case. 3 2.1 6.8 0.3 140 64 D3206 • 80mW coil for high sensitivity models, 140mW coil for sensitive types. 4 2.8 7.6 0.4 140 114 D3207 • Ultrasonic cleaning not recommended. 4.5 3.15 10.3 0.45 140 145 D3204 5 3.5 11.4 0.5 140 178 D3209 6 4.2 13.7 0.6 140 257 D3205 Contact Data @ 23°C (except as noted) 9 6.3 20.4 0.9 140 574 D3210 Arrangement: 2 Form C (DPDT) bifurcated contacts. 12 8.4 27.3 1.2 140 1,028 D3202 Material: Stationary: Palladium-ruthenium. 24 16.8 45.7 2.4 200 2,880 D3212 Ratings: Max. Switched Current: 2A. 48 33.6 67.5 4.8 300 7,680 D3213 Max. Carry Current: 2A (at max ambient temperature.) Non-latching, sensitive 1 coil versions Max. Switched Voltage: 220VDC, 250VAC. 3 2.25 9.0 0.3 80 113 D3221 Max. Switched Power: 60W DC or 62.5VA AC. 4.5 3.38 13.5 0.45 80 253 D3222 UL/CSA Ratings: 300mA @ 110VDC; 1A @ 30VDC; 5 3.75 15.0 0.5 80 313 D3223 500mA @ 120VAC; 250mA @ 240VAC. 6 4.5 18.0 0.6 80 450 D3224 Initial Contact Resistance: <70 milliohms @ 10mA / 20mV. 9 6.75 27.1 0.9 80 1,013 D3225 Expected Mechanical Life: 100 million operations. 12 9.0 36.1 1.2 80 1,800 D3226 Expected Electrical Life: 2.5 million operations @ 10mA / 30mVDC. 24 18.0 54.7 2.4 140 4,114 D3227 2 million operations @ cable load open end. 48 36.0 72.5 4.8 260 8,882 D3228 500,000 operations @ 250mA / 125VDC. Latching 1 coil versions 500,000 operations @ 1.25A / 24VDC. 3 2.25 8.1 -2.25 100 90 D3241 500,000 operations @ 2A / 30VDC. 4.5 3.375 12.1 -3.375 100 203 D3242 Thermoelectric potential: <10μV. 5 3.75 13.5 -3.75 100 250 D3243 6 4.5 16.2 -4.5 100 360 D3244 9 6.75 24.2 -6.75 100 810 D3245 12 9.0 29.0 -9.0 100 1,440 D3246 High Frequency Data 24 18.0 47.5 -18.0 150 3,840 D3247 Capacitance: Between Open Contacts: 2pF, max. Between Coil and Contacts: 4pF, max. Between Poles: 2pF, max. RF Characteristics: Isolation at 100 / 900 MHz: -34.0 db / -15.1 db. Operate Data @ 23°C Insertion loss at 100 / 900 MHz: -0.03 db / -0.60 db. Operate and Release Voltage: See values in chart above. V. S. W. R. at 100 / 900 MHz: 1.07 db / 1.45 db. Operate Time (at nominal voltage): 3 ms, typ.; 4 ms, max. Reset Time [latching](at nominal voltage): 3 ms, typ.; 4 ms, max. Initial Dielectric Strength Release Time [non-latching](w/o diode in parallel): 1 ms, typ.; 3 ms, max. Between Open Contacts: 1,800Vrms for 1 minute. Release Time [non-latching](with diode in parallel): 3 ms, typ.; 4 ms, max. Between Coil and Contacts: 1,800Vrms for 1 minute. Bounce Time (at contact close): 1 ms, typ.; 5 ms, max. Between Poles: 1,800Vrms for 1 minute. Maximum Switching Rate (no load): 50 operations/s. Surge Voltage Resistance per Bellcore GR1089 (2 / 10 μs) and FCC 68 (10 / 160 μs): Between Open Contacts: 2,500V. Between Coil and Contacts: 3,500V. Between Poles: 2,500V. Environmental Data Temperature Range: -55°C to +85°C. Initial Insulation Resistance Maximum Allowable Coil Temperature: 110°C. Thermal Resistance: < 185K/W. 9 Between Contact and Coil: 10 ohms or more @ 500VDC. Shock, half sinus, 11 ms: Functional: 50g. Shock, half sinus, 11 ms: Destructive: 1,500g. Coil Data @ 23°C Vibration, 10-500 Hz.: Functional: 20g. Needle Flame Test: Application Time 20s. Voltage: 3 to 48VDC. Resistance to Soldering: 260°C for 10s. Nominal Power: 80-300mW, depending on model. See coil data tables. Duty Cycle: Continuous. Mechanical Data Termination: Through-hole printed circuit terminals. Mounting Position: Any. Enclosure Type: Immersion cleanable (IP67) plastic case. Weight: 0.10 oz. (2.5g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 329 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM U = Minimum voltage at 23° C after pre-energizing I with nominal voltage without contact current U = Maximum continous voltage at 23° II The operating voltage limits U and U depend on I II the temperature according to the formula: U =K · U I tamb I I 23° C and U =K · U II tamb Il Il 23° C t = Ambient temperature amb U = Minimum voltage at ambient temperature, t I tamb amb U = Maximum voltage at ambient temperature, t II tamb amb k , k = Factors (dependent on temperature), see diagram I II Ambient temperature t [°C] Ordering Information amb See "Part Number" column in Coil Data chart on previous page for available Packaging Information part numbers in the FX2 series. FX2 series relays are shipped in tubes of 50. There are 1,000 relays in a full carton. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions PC Board Layout (Bottom View) .283 ± .003 .587 ± .003 .1 (7.27 ± .08) (14.93 ± .08) (2.54) .421 ± .003 .0431 ± .004 (10.7 ± .08) (1.095 ± .1) .1 (2.54) .2 ± .004 .02 .011 ± .002 (5.08 ± .1) (.5) (.3 ± .05) .129 ± .011 .0439 ± .004 .0335 DIA. MIN. (3.3 ± .3) (1.115 ± .1) (.85) Wiring Diagram (Bottom View) Non-Latching and Latching, Release or Reset Condition Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 330 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 190 series 2 Amp, DPDT, High Sensitivity, DIP PC Board Relay File E55708 File LR73303 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23°C Features Nominal Current Maximum Resistance Approx. • Standard DIP configuration mates with 16-pin socket. Voltage ±10% Voltage ±10% Power • Meets FCC Part 68 (10/160μs). (VDC) (mA) (VDC) (Ohms) (mW) • For applications in telecommunications, office automation, security Standard sensitivity (Max. Voltage stated @ 65°C, except 48V @ 60°C) devices, measurement and control equipment. • Immersion cleanable, plastic sealed case. 3 166.7 3.6 18 500 • Standard, high and ultra-sensitive coils. 5 100.0 6.0 50 500 • Ultrasonic cleaning not recommended. 6 83.3 7.2 72 500 9 55.6 10.8 162 500 12 41.7 14.4 288 500 24 20.8 28.8 1,152 500 48 12.0 52.8 4,000 580 High sensitivity (Max. Voltage stated @ 70°C) Contact Data @ 23°C 3 120.7 3.6 25 360 Arrangement: Bifurcated 2 Form C (DPDT) contacts. 5 72.0 6.0 70 360 Material: Stationary: Silver, gold clad. 6 60.0 7.2 100 360 Ratings: Max. Switched Current: 2A. 9 40.0 10.8 225 360 Max. Carry Current: 2A. 12 30.0 14.4 400 360 Max. Switched Voltage (at nom. voltage): 125VDC, 125VAC. 24 15.0 28.8 1,600 360 Max. Switched Power: 60W DC or 62.5VA AC. 48 7.5 52.8 6,400 360 Min. Switching Load: 10μA, 10mVDC. Rated Load: 500mA at 125VAC. Ultra high sensitivity (Max. Voltage stated @ 70°C) Initial Contact Resistance: 50 milliohms. 3 50.0 4.5 60 150 Expected Mechanical Life: 15,000,000 ops at 36,000 ops/hr. 5 30.0 7.5 167 150 6 25.0 9.0 240 150 9 16.7 13.5 540 150 12 12.5 18.0 960 150 24 8.3 36.0 2,880 200 48 6.25 72.0 7,680 300Ap Initial Dielectric Strength Operate Data @ 23°C Between Open Contacts: 750VAC 50/60 Hz. for 1 minute. Between Coil and Contacts: 1,000VAC 50/60 Hz. for 1 minute. Operate Voltage: 75% of nominal voltage. Between Poles: 1,000VAC 50/60 Hz. for 1 minute. Release Voltage: 5% of nominal voltage. Surge Voltage Resistance per FCC 68 (10 / 160 μs): Operate Time: 7 ms, max. (3.5 ms, mean). Between Open Contacts: 1,500V. Release Time: 3 ms, max. (0.8 ms, mean). Between Coil and Contacts: 1,500V. Bounce Time: Operate: 0.5 ms, approx. Between Poles: 1,500V. Release: 3.5 ms, approx. Operating Frequency: Mechanical: 36,000 ops/hr. Electrical: 1,800 ops/hr at rated load. Environmental Data Temperature Range: -40°C to +70°C. Initial Insulation Resistance Relative Humidity Range: 35% to 85%. 9 Between Contact and Coil: 10 ohms or more @ 500VDC. 2 Shock: Functional: 200m/s (approx. 10g). 2 Destructive: 1,000m/s (approx. 100g). Vibration: 10-55 Hz., .059 in (1.5 mm) double amplitude. Coil Data @ 23°C Mechanical Data Voltage: 3 to 48VDC. Termination: DIP compatible, printed circuit terminals. Enclosure Type: Immersion cleanable plastic case. Nominal Power: 150mW to 580mW. See Coil Data table for details. Duty Cycle: Continuous. Weight: 0.21 oz. (6g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 331 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Operational Performance Curves Maximum Switching Capacity Electrical Service Life Ambient Temp. vs. Max. Voltage Ordering Information Typical Part Number ➤190 - 2 2 B 2 UO 1. Basic Series: 190 = Miniature PC board relay. 2. Enclosure and Terminals: 2= DIP, 16-pin package, sealed. 3. Contact Arrangement: 2= DPDT (2 form C). 4. Coil Voltage: J = 3VDC A= 6VDC B = 12VDC D = 48VDC E= 5VDC G= 9VDC C = 24VDC 5. Contact Material and Type: 2= Silver, gold clad. Bifurcated crossbar. 6. Coil Sensitivity UO = Standard sensitivity (Approx. 500-580mW). SO = High sensitivity. (Approx. 360mW) US = Ultra high sensitivity. (Approx. 150-200mW) Our authorized distributors are more likely to stock the following items for immediate delivery. 190-22B2UO 190-22C2UO 190-22E2UO Outline Dimensions Wiring Diagram (Bottom View) PC Board Layout (Bottom View) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 332 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM V23105 series 3 Amp, DPDT, High Sensitivity, DIP PC Board Relay File E48393 File LR45064-27 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23°C Features Nominal Minimum Maximum Resistance Coil • Standard DIP configuration mates with 16-pin socket. Voltage Voltage Voltage ±10% Version • Meets FCC Part 68 (10/160μs). (VDC) (VDC) (VDC) (Ohms) Voltage • For applications in telecommunications, office automation, security Code devices, measurement and control equipment. 150mW versions • Immersion cleanable, plastic sealed case. • 150mW, 200mW, 400mW or 500mW coil. 5 4.0 13.0 167 001 • Ultrasonic cleaning not recommended. 6 4.8 15.6 240 002 9 7.2 23.4 540 006 12 9.6 31.2 960 003 Contact Data @ 23°C 24 19.2 59.5 3,480 005 Arrangement: 2 Form C (DPDT) single contacts. 200mW versions Material: Stationary: Silver-nickel, gold overlaid. 3 2.1 6.7 45 308 Ratings: Max. Switched Current: 3A. 5 3.5 11.2 125 301 Max. Carry Current: 3A. 6 4.2 13.5 180 302 Max. Switched Voltage (at nom. voltage): 220VDC, 250VAC. 9 6.3 20.3 405 306 Max. Switched Power: 60W DC or 125VA AC. 12 8.4 27.0 720 303 Min. Switching Load: 10mVDC. 24 16.8 54.1 2,880 305 UL/CSA Ratings: 1A / 30VDC; 300mA / 100VDC; 48 33.6 108.3 11,520 307 1A / 125VAC (400 & 500mW coils only); 500mA / 125VAC (150 & 200mW coils only). 400mW versions Initial Contact Resistance: 100 milliohms @ 10mA / 20mV. 5 3.5 7.9 62 401 Expected Mechanical Life: 15,000,000 ops. 6 4.2 9.5 90 402 Expected Electrical Life: 2 million operations @ 100mA / 6VDC. 9 6.3 14.3 203 406 500,000 operations @ 1.0A / 30VDC. 12 8.4 19.1 360 403 100,000 operations @ 2.0A / 30VDC for 24 16.8 37.9 1,440 405 400mW and 500mW versions only. 48 33.6 75.8 5,760 407 300,000 operations @ 500mA / 230VAC. 500mW versions Thermoelectric potential: <15μV. 5 3.5 6.3 36 501 6 4.2 8.9 70 502 9 6.3 12.5 140 506 High Frequency Data 10 7.0 15.0 200 504 12 8.4 18.0 280 503 Capacitance: Between Open Contacts: 1pF, max. 24 16.8 36.0 1,050 505 Between Coil and Contacts: 2pF, max. 48 33.6 72.0 4,000 507 Between Poles: 1.5pF, max.. RF Characteristics: Isolation at 100 / 900 MHz: -39.0 db / -20.7 db. Insertion loss at 100 / 900 MHz: -0.02 db / -0.27 db. Operate Data @ 23°C V. S. W. R. at 100 / 900 MHz: 1.04 db / 1.40 db. Operate Voltage: 70% of nominal voltage (80% for 150mW coil). Release Voltage: 5% of nominal voltage. Operate Time (Including Bounce): <10 ms. Initial Dielectric Strength Release Time (Including Bounce): <10 ms. Between Open Contacts: 750Vrms for 1 minute. Between Coil and Contacts: 1,000Vrms for 1 minute. Environmental Data Between Poles: 750Vrms for 1 minute. Temperature Range: 150/200mW coil: -25°C to +85°C. Surge Voltage Resistance per FCC 68 (10 / 160 μs): 400mW coil: -25°C to +75°C. Between Open Contacts: 1,500V. 500mW coil: -25°C to +60°C. Between Coil and Contacts: 1,500V. Maximum Allowable Coil Temperature: 105°C. Between Poles: 1,500V. Thermal Resistance: < 100K/W. Shock: Functional: 10g. Destructive: 40g. Vibration, 10-55 Hz.: Functional: 10g. Initial Insulation Resistance Needle Flame Test: Application time 20s, burning time <15s. 9 Between Contact and Coil: 10 ohms or more @ 500VDC. Resistance to Soldering Heat: 260°C for 10S.. Mechanical Data Coil Data @ 23°C Termination: DIP compatible, printed circuit terminals. Voltage: 3 to 48VDC. Enclosure Type: Immersion cleanable (IP67) plastic case. Nominal Power: See Coil Data table. Weight: 0.21 oz. (6g) approximately. Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 333 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM Ordering Information Typical Part Number B V23105-A5 4 01 A201 1. Basic Series: V23105-A5 = Miniature PC board relay. 2. Version: 0 = 150mW coil. 3 = 200mW coil. 4 = 400mW coil. 5 = 500mW coil. 3. Coil Voltage: 08 = 3VDC (150mW and 200mW coils only) 06 = 9VDC 05 = 24VDC 01 = 5VDC 04 = 10VDC (500mW coil only) 07 = 48VDC (not available with 150mW coil) 02 = 6VDC 03 = 12VDC 4. Contact Type and Material: A201 = DPDT, silver-nickel, gold overlaid. Our authorized distributors are more likely to stock the following items for immediate delivery. V23105A5001A201 V23105A5401A201 V23105A5403A201 V23105A5003A201 V23105A5005A201 V23105A5405A201 V23105A5407A201 Outline Dimensions Wiring Diagram (Bottom View) .799 MAX. .398 MAX. (10.1) (20.3) 14 6 8 .0098 MIN. .45 MAX. (0.25) (11.43) 16 13 11 9 .028 MAX. .016 MAX. .138 (0.4) (0.72) (3.5) PC Board Layout (Bottom View) .039 + .004 DIA. 8 X (1.0 + 0.1) 1 468 .300 (7.62) 16 13 11 9 .200 (5.08) .200 (5.08) .300 (7.62) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 334 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM MT2 series DPDT Telecom/Signal PC Board Relays File E111441 File 176679-1079886 16502-001 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 23°C Features Nominal Minimum Maximum Minimum Resistance Part • Through hole type terminals. Voltage Voltage Voltage Release ±10% Number • Meets FCC Part 68 and ITU-T K20. (VDC) (VDC) (VDC) Voltage (Ohms) • For applications in telecommunications, office automation, consumer (VDC) electronics, medical equipment, measurement and control equipment. 150mW versions • Immersion cleanable, plastic sealed case. 4.5 3.2 10.1 0.45 136 C 93406 • 150mW, 200mW, 300mW, 400mW or 550mW coil. 5 3.6 11.3 0.50 168 C 93401 • Ultrasonic cleaning not recommended. 6 4.3 13.4 0.60 240 C 93427 9 6.4 20.3 0.90 544 C 93405 12 8.6 27.1 1.2 968 C 93402 24 174.1 54.1 2.4 3,872 C 93404 48 33.1 108.3 4.8 15,468 C 93404 200mW versions Contact Data @ 23°C (except as noted) 4.5 2.9 8.7 0.45 101 C 93415 Arrangement: 2 Form C (DPDT) bifurcatedcontacts. 5 3.3 9.7 0.5 125 C 93416 Material: Stationary: Silver-nickel, gold covered. 6 3.9 11.6 0.6 180 C 93428 Ratings: Max. Switched Current: 2A. 9 5.9 17.5 0.9 405 C 93417 Max. Carry Current: 1.25A (at max ambient temperature. 12 7.8 23.3 1.2 720 C 93418 Max. Switched Voltage: 150VDC, 150VAC. 24 15.6 46.7 2.4 2,880 C 93419 Max. Switched Power: 30W DC or 62.5VA AC. 48 31.2 93.4 4.8 11,520 C 93420 UL/CSA Ratings: 400mA @ 125VAC; 1.25A @ 24VDC. 300mW versions Initial Contact Resistance: <70 milliohms @ 10mA / 20mV. 4.5 3.1 7.4 0.45 73 C 93433 Expected Mechanical Life: 100,000,000 ops. 5 3.4 8.2 0.5 90 C 93434 Expected Electrical Life: 5 million operations @ 10mA / 30mVDC. 12 8.25 19.7 1.2 515 C 93412 2.5 million operations @ cable load open end. 24 16.5 39.5 2.4 2,060 C 93435 200,000 operations @ 1.25A / 24VDC, res. 48 32.5 79.0 4.8 8,240 C 93436 200,000 operations @ 200mA / 150VDC, res. 400mW versions Thermoelectric potential: <10μV. 4.5 2.9 6.1 0.45 50 C 93421 5 3.3 6.9 0.5 63 C 93422 6 3.9 8.2 0.6 90 C 93429 9 5.9 12.4 0.9 203 C 93423 12 7.8 16.5 1.2 360 C 93424 24 15.6 33.0 2.4 1,440 C 93425 48 31.2 66.0 4.8 5,760 C 93426 High Frequency Data 550mW versions Capacitance: Between Open Contacts: 2pF, max. 4.5 2.9 6.0 0.45 36 C 93438 Between Coil and Contacts: 4pF, max. 5 3.3 6.8 0.5 45 C 93450 Between Poles: 2pF, max.. 6 3.9 8.1 0.6 66 C 93437 RF Characteristics: Isolation at 100 / 900 MHz: -31.8 db / -14.2 db. 12 7.8 16.7 1.2 280 C 93432 Insertion loss at 100 / 900 MHz: -0.02 db / -0.97 db. 24 15.6 32.4 2.4 1,050 C 93431 V. S. W. R. at 100 / 900 MHz: 1.03 db / 1.31 db. 48 31.2 64.1 4.8 4,100 C 93430 Operate Data @ 23°C Operate and Release Voltage: See values in chart above. Operate Time (at nominal voltage): 4 ms, typ.; 5 ms, max. Release Time (without diode in parallel): 1 ms, typ.; 3 ms, max. Release Time (with diode in parallel): 4 ms, typ.; 6 ms, max. Initial Dielectric Strength Bounce Time (at contact close): 1 ms, typ.; 5 ms, max. Between Open Contacts: 700Vrms for 1 minute. Maximum Switching Rate (no load): 50 operations/s. Between Coil and Contacts: 1,050Vrms for 1 minute. Environmental Data Between Poles: 700Vrms for 1 minute. Surge Voltage: 1,500V surge per FCC Part 68 and IEC. Temperature Range: -55°C to +85°C. Maximum Allowable Coil Temperature: 125°C. Thermal Resistance: < 125K/W. Shock, half sinus, 11 ms: Functional: 50g. Destructive: 100g. Initial Insulation Resistance Vibration, 10-500 Hz.: Functional: 10g. 9 Between Contact and Coil: 10 ohms or more @ 500VDC. Needle Flame Test: Application Time 10s. Resistance to Soldering: 260°C for 10s. Mechanical Data Coil Data @ 23°C Termination: DIP compatible, printed circuit terminals. Voltage: 4.5 to 48VDC. Mounting Position: Any. Nominal Power: See Coil Data table. Enclosure Type: Immersion cleanable (IP67) plastic case. Duty Cycle: Continuous. Weight: 0.18 oz. (5g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 335 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM U = Minimum voltage at 23° C after pre-energizing I with nominal voltage without contact current U = Maximum continous voltage at 23° II The operating voltage limits U and U depend on I II the temperature according to the formula: U =K · U I tamb I I 23° C and U =K · U II tamb Il Il 23° C t = Ambient temperature amb U = Minimum voltage at ambient temperature, t I tamb amb U = Maximum voltage at ambient temperature, t II tamb amb k , k = Factors (dependent on temperature), see diagram I II Ambient temperature t [°C] amb Ordering Information Packaging Information See "Part Number" column in Coil Data chart on previous page for available MT2 series relays are shipped in tubes of 25. There are 500 relays in a full part numbers in the MT2 series. carton. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) .393 +.002/-.0008 Orientation mark (10 +.05/-.02) .795 +.002/-.0008 14 6 8 (20.2 +.05/-.02) .021 .433 +.004/-.008 (.55) (11 +.1/-.2) 16 13 11 9 .020 .3 ± .005 .122 ± .011 (.5) (7.62 ± .15) (3.1 ± .3) PC Board Layout (Bottom View) .031 DIA. MIN. 8 X (0.8) .048 ± .005 .300 (1.21 ± .15) (7.62) .200 (5.08) .047 ± .005 .200 (1.19 ± .15) (5.08) .300 (7.62) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 336 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM MT4 series 4PDT Telecom/Signal PC Board Relays File E111441 File 176679-1079886 16501-001 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 23°C • Through hole type terminals. Voltage: 4.5 to 48VDC. • Meets Bellcore GR 1089, FCC Part 68 and ITU-T K20. Nominal Power: See Coil Data table. • For applications in telecommunications, office automation, consumer Duty Cycle: Continuous. electronics, medical equipment, measurement and control equipment. • Immersion cleanable, plastic sealed case. • 300mW coil. • Ultrasonic cleaning not recommended. Coil Data @ 23°C Contact Data @ 23°C (except as noted) Nominal Minimum Maximum Minimum Resistance Part Arrangement: 4 Form C (DPDT) bifurcatedcontacts. Voltage Voltage Voltage Release ±10% Number Material: Stationary: Silver-nickel, gold covered. (VDC) (VDC) (VDC) Voltage (Ohms) Ratings: Max. Switched Current: 1.25A. (VDC) Max. Carry Current: 1.25A (at max ambient temperature. 300mW versions Max. Switched Voltage: 150VDC, 150VAC. Max. Switched Power: 30W DC or 62.5VA AC. 4.5 3.2 7.8 0.45 67 C 93807 UL/CSA Ratings: 400mA @ 125VAC; 1.25A @ 24VDC. 5 3.6 8.65 0.5 83 C 93801 Initial Contact Resistance: <70 milliohms @ 10mA / 20mV. 9 6.4 15.6 0.9 270 C 93805 Expected Mechanical Life: 100,000,000 ops. 12 8.6 20.8 1.2 480 C 93802 Expected Electrical Life: 10 million operations @ 10mA / 30mVDC. 24 17.1 41.6 2.4 1,920 C 93803 5 million operations @ cable load open end. 48 34.1 83.2 4.8 7,680 C 93804 200,000 operations @ 1.25A / 24VDC, res. 200,000 operations @ 200mA / 150VDC, res. Thermoelectric potential: <10μV. Operate Data @ 23°C Operate and Release Voltage: See values in chart above. Operate Time (at nominal voltage): 4 ms, typ.; 6 ms, max. High Frequency Data Release Time (without diode in parallel): 1 ms, typ.; 3 ms, max. Release Time (with diode in parallel): 4 ms, typ.; 6 ms, max. Capacitance: Between Open Contacts: 2pF, max. Bounce Time (at contact close): 1 ms, typ.; 5 ms, max. Between Coil and Contacts: 4pF, max. Maximum Switching Rate (no load): 50 operations/s. Between Poles: 2pF, max. RF Characteristics: Isolation at 100 / 900 MHz: -31.2 db / -17.2 db. Insertion loss at 100 / 900 MHz: -0.05 db / -0.91 db. V. S. W. R. at 100 / 900 MHz: 1.03 db / 1.31 db. Environmental Data Temperature Range: -55°C to +85°C. Initial Dielectric Strength Maximum Allowable Coil Temperature: 100°C. Between Open Contacts: 700Vrms for 1 minute. Thermal Resistance: < 105K/W. Between Coil and Contacts: 1,800Vrms for 1 minute. Shock, half sinus, 11 ms: Functional: 10g. Between Poles: 700Vrms for 1 minute. Destructive: 100g. Surge Voltage Resistance per Bellcore TR-NWT-001089 (2 / 10 μs), Vibration, 10-500 Hz.: Functional: 10g. FCC 68 (10 / 160 μs) and IEC (10 / 700 μs): Needle Flame Test: Application Time 10s. Between Open Contacts: 1,500V. Resistance to Soldering: 260°C for 10s. Between Coil and Contacts: 2,500V. Between Poles: 1,500V. Mechanical Data Termination: DIP compatible, printed circuit terminals. Initial Insulation Resistance Mounting Position: Any. Enclosure Type: Immersion cleanable (IP67) plastic case. 9 Between Contact and Coil: 10 ohms or more @ 500VDC. Weight: 0.25 oz. (7g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 337 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AXICOM U = Minimum voltage at 23° C after pre-energizing I with nominal voltage without contact current U = Maximum continous voltage at 23° II The operating voltage limits U and U depend on I II the temperature according to the formula: U =K · U I tamb I I 23° C and U =K · U II tamb Il Il 23° C t = Ambient temperature amb U = Minimum voltage at ambient temperature, t I tamb amb U = Maximum voltage at ambient temperature, t II tamb amb k , k = Factors (dependent on temperature), see diagram I II Ambient temperature t [°C] amb Ordering Information Packaging Information See "Part Number" column in Coil Data chart on previous page for available MT4 series relays are shipped in tubes of 25. There are 500 relays in a full part numbers in the MT4 series. carton. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) Orientation mark .795 ±.004 .582 ±.004 (20.0 ± .1) (14.8 ± .1) .031 .433 +.004/-.008 (.8) (11 +.1/-.2) .020 .5 ± .005 (.5) (12.7 ± .15) .122 ± .011 (3.1 ± .3) PC Board Layout (Bottom View) .1 TYP . (2.54) .048 ± .005 .1 TYP . .5 (1.21 ± .15) (2.54) (12.7) .041 ± .005 (1.05 ± .15) 14 X .031 DIA. MIN. (0.8) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 338 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 MID-RANGE PC BOARD RELAYS Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 0409 (Hi-Inrush) ......... 10A, One-pole Relay ......................... 488 0410 .......................... 16A, One-pole Relay ......................... 491 NOTE: A question tree that may help you in selecting an 0429 (Hi-Inrush) ......... 10A, One-pole Relay ......................... 457 appropriate relay for your application can be found on 0430 .......................... 10-16A, One- or Two-pole Relay ...... 495 Transformers.............................. 201-212 the next page. 2 600 ............................ 3-15A, One-pole Relay ...................... 497 Card E (V23057) ........ 8A, One-pole Relay ........................... 480 IF (V23077) ................ 16A, One-pole Relay ......................... 489 OJ/OJE ...................... 3-10A, One-pole Relay ...................... 422 Low-signal PC Board Relays. 301-336 3 OMI/OMIH ................ 16A, One-pole Relay ......................... 458 OMI 2 ........................ 5A, Two-pole Relay........................... 460 OMIF ......................... 20A, One-pole Relay ......................... 466 OMIT ......................... 10A, One-pole Relay ......................... 464 Mid-Range PC Board Relays.... 401-498 4 ORWH ....................... 10A, One-pole Relay ......................... 438 OSA ........................... 3-5A, Two-pole Relay........................ 470 OSZ ........................... 16A, One-pole Relay ......................... 472 OUDH........................ 10A, One-pole Relay ......................... 432 Power PC Board Relays ................ 22-35 5 OZ/OZF...................... 16A, One-pole Relay ......................... 462 PB.............................. 10A, One-pole Relay ......................... 426 PCD/PCDF ................. 15A, One-pole Relay ......................... 424 NOTE: In addition to the products listed in this section of the Relays with PCE ........................... 10A, One-pole Relay ......................... 436 databook, 3-20A relays described in other sections are 6 Forcibly-Guided Contacts.............. 36-79 PCG ........................... 5A, Two-pole Relay........................... 493 available with printed circuit board terminals. Following is a list: PCH ........................... 5-10A, One-pole Relay ...................... 418 PCI............................. 3A, Two-pole Relay........................... 468 Plug-in/Panel Mount Relays with Forcibly Guided Contacts PCJ ............................ 5A, One-pole Relay ........................... 416 7 SR4 D/M................................................................... 606 General Purpose Relays............701-749 PCK ........................... 16A, One-pole Relay ......................... 478 SR6 D/M................................................................... 607 PCN ........................... 3A, One-pole Relay ........................... 407 SR6S ........................................................................ 611 PE .............................. 5A, One-pole Relay ........................... 403 V23047 (SR2M) ........................................................ 603 Power Relays & Definite RE.............................. 6A, One-pole Relay ........................... 405 V23050 (SR6) ........................................................... 609 8 Purpose Contactors...................... 89-131 RP II/1........................ 8-16A, One-pole Relay ...................... 484 Plug-in/Panel Mount Relays RP II/2........................ 8A, Two-pole Relay........................... 482 K10 ........................................................................... 720 RP3SL (Hi-Inrush) ...... 16A, One-pole Relay ......................... 486 Latching, Impulse & KH ............................................................................ 709 RT - AC Coil .............. 8-16A, One- or two-pole Relay ......... 448 9 KU ............................................................................ 723 Rotary Relays ...............................149-154 RT - DC Coil .............. 8-16A, One- or two-pole Relay ......... 446 PCL/PCLH ................................................................ 713 RT - Sensitive ........... 10A, One-pole Relay ......................... 451 PT ............................................................................. 717 RT - Hi-Inrush ........... 16A, One-pole Relay ......................... 455 R10 ........................................................................... 703 Automotive Relays ......................141-148 RM ........................................................................... 733 RT - Hi-Temp ............ 10-16A, One-pole Relay .................... 453 10 RY II........................... 8A, One-pole Relay ........................... 412 Power Relays & Contactors SDT ........................... 10A, One-pole Relay ......................... 474 KUHP........................................................................ 803 Solid State Relays & SDT-R ........................ 5-10A, One-pole Relay ...................... 476 11 SNR (V23092) ............ 6A, One-pole Relay ........................... 409 Input/Output Modules ................195-207 Latching, Impulse, Rotary & SRUDH ...................... 12A, One-pole Relay ......................... 442 Special Application Relays SRUUH ...................... 15A, One-pole Relay ......................... 444 KUL .......................................................................... 908 Time Delay Relays & PCKWK..................................................................... 904 T7C ............................ 5-12A, One-pole Relay ...................... 440 PE - Latching ............................................................ 902 12 T7N............................ 10A, One-pole Relay ......................... 434 Counters ........................................208-232 RT - Latching ............................................................ 906 T73 ............................ 10A, One-pole Relay ......................... 430 T75 ............................ 8-14A, One-pole Relay ...................... 414 Solid State Relays & I/O Modules T77 ............................ 3-10A, One-pole Relay ...................... 420 Sensors & Monitors ...................233-234 OAC/ODC ............................................................... 1110 13 U/UB (V23148 ) ......... 7A, One-pole Relay ........................... 428 OACM/ODCM ........................................................ 1118 V23057 (Card E) ........ 8A, One-pole Relay ........................... 480 Products in our line of high performance relays (see V23077 (IF) ................ 16A, One-pole Relay ......................... 489 High Performance Relays overview in section 14 of this databook) are also V23092 (SNR) ............ 6A, One-pole Relay ........................... 409 and Contactors (overview) ....... 233-234 14 offered with PC terminals. V23148 (U/UB) .......... 7A, One-pole Relay ........................... 428 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 401 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 MID-RANGE PC BOARD RELAYS Mid Range (3-20A) PC Board Relay Question Tree This guide helps the user select one or more relay series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, the user must assume ultimate responsibility for determining the suitability of a relay for a particular application. Several relay product families are quite broad (i.e., RT), and only the basic family designator, not the actual product series designator (RT - Sensitive) is listed in this guide. Contact Switch Rating? 3 to 10 10 to 20 amps* amps* AC or DC AC or DC Coil? Coil? AC DC AC DC Coil Coil Coil Coil Number Number Number Number of Poles? of Poles? of Poles? of Poles? One Two + One Two + One Two + One Two + Pole Poles Pole Poles Pole Poles Pole Poles None RT 600 0430 RT None 0409 0430 OJ/OJE OMI-2 0410 OMIT OSA 0429 ORWH PCG 0430 OUDH PCI 600 OZ RP II/2 OMI/OMIH PB RT OMIF PCE OMIT PCH ORWH PCJ OSZ PCN OUDH PE OZ RE PB RP II/1 PCD/PCDF RY II PCE SDT PCK SDT-R RP II/1 T7C RP3 SL T7N RT T73 SDT T77 SRUDH V23057 SRUUH V23092 T7C V23148 T7N T73 T75 V23077 * Typical loads at 28VDC or 120VAC, resistive, for comparison purposes. See catalog pages for a given series for detailed rating specifications. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 402 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK PE series 5 Amp Miniature Printed Circuit Board Relay File E214025 File 6656UG Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Contact Life • 1 Form C (SPDT). • 5 amp rated current. • Sensitive coil 200mW. • 10mm height. • Flux-tight for wave soldering. • Supplied in tubes. • DIP configuration. • 4kV coil-to-contact insulation. • Latching version available. See separate “PE Latching Series” data sheet. Contact Data @ 85°C Arrangement: 1 Form C (SPDT). Material: Silver-nickel 90/10. Expected Mechanical Life: 15 million operations minimum. Ratings: 5 amp 250VAC resistive 100,000 operations. Initial Dielectric Strength Between Open Contacts: 1,000VAC. Max. DC Load Breaking Capacity Between Coil and Contacts: 4,000VAC. Creepage/Clearance Coil-Contact: >3.2/4mm. 20 Coil Data DC @ 20°C 10 Nominal Coil Power: 200mW. 5 DC Must Nominal 2 Nominal Resistance Operate Drop-out Coil Resistive Load Voltage in Ohms Voltage Voltage Current 1 VDC ±10% VDC VDC (mA) 0.5 05 125 3.8 0.5 40.0 06 172 4.5 0.6 34.9 0.2 12 685 9.0 1.2 17.5 24 2,725 18.0 2.4 8.8 0.1 48 10,970 36.0 4.8 4.4 10 20 30 40 50 100 200 300 DC Voltage (VDC) Operate Data Must Operate Voltage: See Coil Data table. Operate Time : 5 ms typical, at nom. voltage. Coil Operating Range Release Time : 2 ms typical, at nom. voltage. Bounce Time: 1 ms typical, at nom. voltage (N/O contact); 3.0 5 ms typical, at nom. voltage (N/C contact). Switching Rate: 360 ops./hr. max. at rated load. DC Coil 2.6 0A 2.2 Environmental Data 5A Temperature Range: 1.8 Operating: -40°C to +85°C DC coil. Vibration (30 to 500 Hz.): 15g N/O; 5g N/C. 1.4 Shock (Destructive): >100g. Nominal Coil Voltage 1.0 Mechanical Data 0.6 Termination: Printed circuit terminals. 0 +20 +40 +60 +80 +100 Enclosure (94 V-0 rated): Flux-tight plastic case. Ambient T emperature (°C) Weight: 0.18 oz. (5 g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 403 specified. Refer to inside back cover. DC Current (A) Applied Coil Voltage (% of rated nom.) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B PE 0 1 4 024 1. Basic Series: PE = Miniature printed circuit board relay. 2. Enclosure*: 0 = Flux-tight. 3. Contact Arrangement: 1 = 1 Form C (SPDT) 4. Contact Material: 4 = Silver-nickel 90/10 5. Coil Voltage: 005 = 5VDC 012 = 12VDC 048 = 48VDC 006 = 6VDC 024 = 24VDC * Sealed version available on request. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PE014005 PE014024 PE014012 Outline Dimensions Wiring Diagram (Bottom View) .787 .394 (20.0) (10.0) .394 (10.0) .149 .055 (3.8) (1.4) PC Board Layout (Bottom View) .051 + 0.004 – 0 1.3 + 0.1 – 0 ( ) .30 (7.62) .047 .30 (1.2) (7.62) .70 (17.78) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 404 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RE series 6 Amp Miniature Printed Circuit Board Relay File E214025 NR 10071 NR 8841-014-02 NR 10308.ZA1.A Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data • 1 Form A (SPST-NO). Termination: Printed circuit terminals. • 6 amp rated current. Enclosure (94 V-0 rated): Sealed (RTIII) plastic case. • Sensitive coil 200 mW. Weight: 0.18 oz. (5 g) approximately. • 10.6mm height. • Fully sealed with vent hole. • Supplied in tubes. Contact Data @ 70°C Arrangements: 1 Form A (SPST-NO). Contact Life Material: Silver-cadmium oxide. Silver-nickel 0.15 with gold plating. Expected Mechanical Life: 30 million operations minimum. Ratings: 6 amp 30 VDC resistive load 500,000 ops. 0.3 amp 50 VDC L/R = 40ms 3,000,000 ops. UL/CSA AgCdO @ 25°C 6 amp 250VAC general purpose 30,000 ops. 10 amp 120VAC general purpose (+70°C) 6,000 ops. 1/4 HP 240VAC 30,000 ops. 1/6 HP 277VAC 30,000 ops. 1/8 HP 120VAC 30,000 ops. B300 6,000 ops. UL/CSA AgNi 0.15 @ 70°C 6 amp 250VAC general purpose 6,000 ops. VDE 0435 @ 70°C 6 amp 250VAC general purpose 100,000 ops. 10mA 5VDC 5,000,000 ops. VDE 0660 AC 11 @ 35°C Max. DC Load Breaking Capacity 2 amp 400VAC 200,000 ops. Initial Dielectric Strength Between Open Contacts: 1,000VAC. Between Coil and Contacts: 4,000VAC. Creepage/Clearance Coil-Contact: 4/4mm. Coil Data DC @ 20°C Nominal Coil Power: 200mW. DC Must Nominal Nominal Resistance Operate Drop-out Coil Voltage in Ohms Voltage Voltage Current VDC ±10% VDC VDC (mA) 05 125±10% 3.5 0.5 40 06 180±10% 4.2 0.6 33.3 12 720±10% 8.4 1.2 16.7 24 2,880±15% 16.8 2.4 8.3 Coil Operating Range 48 11,520±15% 33.3 4.8 4.2 Operate Data Must Operate Voltage: See Coil Data table. Operate Time : 5 ms typical, at nom. voltage. Release Time : 1 ms typical, at nom. voltage. Bounce Time: 1 ms typical, at nom. voltage. Switching Rate: 360 ops./hr. max. at rated load. 12,000 Environmental Data Temperature Range: Operating: -40°C to +70°C. (+85°C @ 4 amp). Vibration: 10 to 150 Hz. at 10g N/O 20g N/C. Shock (destructive): >100g. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 405 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RE 0 3 0 006 1. Basic Series: RE = Miniature printed circuit board relay. 2. Enclosure: 0 = Sealed 3. Contact Arrangement: 3 = 1 Form A (SPST-NO) 4. Contact Material: 0 = Silver-cadmium oxide. 2 = Silver-nickel 0.15 with gold plating. 5. Coil Voltage: 005 = 5VDC 012 = 12VDC 048 = 48VDC 006 = 6VDC 024 = 24VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. RE030005 RE030024 RE030012 Outline Dimensions Wiring Diagram (Bottom View) .417 .787 (10.6) .394 (20.0) (10.0) VENT .138 HOLE* (3.5) In case of full load on contacts and under extreme operating conditions (switching rate, ambient temperature) it is recommended to open the sealed (washable) relays, by opening the vent hole* provided for this purpose, after completion of the cleaning process. PC Board Layout (Bottom View) .051 + 0.004 – 0 1.3 + 0.1 ( ) – 0 .3 (7.62) .4 (10.16) .7 (17.78) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 406 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCN series Slim, 3 Amp PC Board Relay File No. E82292 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features Voltage: 5 to 24VDC. • Only 5 mm wide, permitting high density spacing. Nominal Power: 120mW. • 1 Form A contact arrangement. Operate Power: 58.8mW. • Sensitive coil requires only 120mW coil power. Coil Temperature Rise: 35°C max., at rated coil voltage. • Well suited for HVAC controls, I/O panels, PLCs. Max. Coil Voltage: 130% of nominal. Duty Cycle: Continuous. Coil Data @ 20°C PCN Contact Data @ 20°C Rated Coil Nominal Coil Must Operate Must Release Arrangements: 1 Form A. Voltage Current Resistance Voltage Voltage Type: Bifurcated. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) Material: AgNi Max. Switching Rate: 12,000 ops./min. (no load). 5 24.0 208 3.5 0.5 6 20.0 300 4.2 0.6 100 ops./min. (rated load). 9 13.3 675 6.3 0.9 Expected Mechanical Life: 20 million operations (no load). 12 10.0 1,200 8.4 1.2 Expected Electrical Life: 100,000 operations (rated load). 24 5.0 4,800 16.8 2.4 Minimum Load: 1mA @ 5VDC. Contact Ratings Operate Data Ratings: 3A @ 250VAC resistive. Must Operate Voltage: 70% of nominal voltage or less. 3A @ 30VDC resistive. Must Release Voltage: 10% of nominal voltage or more. Max. Switched Voltage: AC: 277V; DC: 125V. Operate Time: 5 ms typ. Rated Switched Voltage: AC: 250V. Release Time: 2 ms typ. Max. Switched Current: 3A. Bounce Time: <1 ms typ. Max. Switched Power: AC: 1250VA; DC: 150W. Initial Contact Resistance: 50 milliohms @ 100mA, 6VDC (reference). NOTE: A 5A rated version ot the PCN series is now in development. Consult factory regarding its availability. Environmental Data Temperature Range: Operating: -40°C to +70°C Insulation Data Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude. Operational: 10 to 55Hz., 1.5mm double amplitude. Insulation to IEC 664/VDE 0110 2 Shock, Mechanical: 1,000m/s (100G approximately). Voltage Rating: 277VAC. 2 Operational: 100m/s (10G approximately). Pollution Degree: 2. Operating Humidity: 10 to 90% RH. (Non-condensing). Overvoltage Category: II. Tracking Resistance of Relay Base: PTI 600. Mechanical Data Initial Dielectric Strength Termination: Printed circuit terminals. Between Open Contacts: 750Vrms. Enclosure (94V-0 Flammability Ratings): Sealed (RT III / wash-tight) plastic Between Coil and Contacts: 3,000Vrms. case. Surge Voltage Between Coil and Contacts: 5,080V (1.2 / 50µs). Weight: 0.1 oz (3g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 407 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B PCN -1 06 D 3 M H Z ,300 1. Basic Series: PCN = Slim 3A PC Board Relay 2. Number of Poles: 1 = 1 Pole 3. Coil Voltage: 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 18 = 18VDC 24= 24VDC 4. Coil Version: D = Standard 120mW 5. Contact Material: 3 = AgNi 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Enclosure Version: H = Sealed (wash-tight) 8. Insulation: Z = High Insulation 9. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram .787 .197 (20.0) (5.0) .492 (12.5) .154 MAX. PC Board Layout (Bottom View) (3.9) .049 - .05 GRID (1.25 - 1.27) .041 (1.05) .0275 DIA. + .004 .0394 DIA. + .004 (.7 + .1) (1 + .1) Reference Data Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 408 Refer to inside back cover. specified. Catalog 1308242 Issued 3-03 SCHRACK V23092 (SNR) series 6 Amp Slim Miniature, PC Board Relay File E48393 VDE File 0631 / 0160 / 0435 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Environmental Data Features Temperature Range: • 1 Form A (SPST-NO) and 1 Form C (SPDT). Operating: -40°C to +85°C. • 6 A rated current. Operating Humidity: 20 to 85% RH. • Slim package : 5mm width. • Sensitive coil 170mW. • 4kV coil-to-contact insulation. Mechanical Data • Applications: PLCs, timers, temperature controllers, I/O modules. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Plastic sealed case (RT III wash tight). Weight: 0.2 oz. (6g) approximately. Contact Data @ 20°C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver tin oxide, silver tin oxide with gold plating; and Contact Life silver nickel 90/10. Max. Switching Rate: 12,000 ops./min. (no load). 60 ops./min. (rated load). Initial Contact Resistance: AgSnO or AgNi 90/10: 100 milliohms @ 1A, 12VDC. AgSnO, Au plated: 50 milliohms @ 100mA, 6VDC. Max. Switched Voltage: AC: 400V; DC: 300V. Rated Voltage: AC: 250V; DC: 24V. Max. Switched Current: 6A. Max. Switched Power: 1,500VA. (See curve for DC Power). Minimum Load: AgSnO or AgNi 90/10: >500mA, 12VAC/VDC. AgSnO, Au plated: >10mA, 5VAC/VDC. Expected Mechanical Life: 10 million operations. Expected Electrical Life: See curve. Initial Dielectric Strength Max. DC Load Breaking Capacity Between Open Contacts: 1,000VAC, (1 minute). Between Contacts and Coil: 4,000VAC, (1 minute). Surge Voltage Between Coil and Contacts: 6,000V (1.2/50μs). Creepage/Clearance Coil-to-Contact: Min. 6/8mm. Consult factory regarding availability of 1 Form A model with 8/8mm. Initial Insulation Resistance Between Mutually Insulated Conductors: 100,000Mohm @ 500VDC. Coil Data @ 20°C Voltage: 5 to 48VDC. Nominal Power: 170mW. V23092 Rated Coil Nominal Coil Must Operate Must Release Coil Operating Range Voltage Current Resistance Voltage Voltage (VDC) (mA) (ohms) ± 10% (VDC) (VDC) 5 34.0 119 3.50 0.25 12 14.2 848 8.40 0.6 24 7.1 3,390 16.80 1.20 48 4.5 10,600* 33.60 2.40 * ±15% Operate Data @ 20°C Must Operate Voltage: 70% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 5 ms max. at nominal voltage. Release Time: 2.5 ms max. at nominal voltage. Bounce Time: 1.5 ms (N/O) typical at nominal voltage. 5 ms (N/C) typical at nominal voltage. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 409 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B V23092 A 1 024 A 3 01 1. Basic Series: V23092 = Slim PC board relay. 2. Package Type: A = PCB vertical version. B = PCB flat pack version. 3. Enclosure: 1 = Plastic sealed case. 4. Coil Input: 005 = 5VDC 012 = 12VDC 024 = 24VDC 48 = 48VDC 5. Contact System: A = Standard. 6. Contact Material: 2 = AgSnO, Au plated. 3 = AgSnO 8 = AgNi 90/10 7. Contact Arangement: 01 = 1 Form C (SPDT). 02 = 1 Form A (SPST-NO). Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. V23092A1012A301 V23092A1024A301 Outline Dimensions Vertical Version Flat Pack Version PC Board Layout (Bottom View) Wiring Diagrams (Bottom Views) 1 Form C 1 Form A Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 410 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK DIN Rail Interface Module and Accessories for V23092 Series (SNR) Relay PC Board Relay Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Outline Dimensions • Module width is 0.2 in (5.08mm). • Narrow width permits high density packing of modules on a DIN rail. • Jumper bars available. • Available as a set or as individual components. Technical Information Rated Current / Rated Voltage: 6A / 250VAC. Dielectric Strength, Coil-to-Contact: >4,000Vrms. Insulation Category (VDR 0110b): C / 250. Operating Ambient Temperature: - 20°C to +55°C. Protection Category: IP 20. Protection Against Accidental Contact Meeting: VBG 4. 2 Wire Cross Section with/without Bootlace Crimp: 0.22 - 2.5mm . Terminal Torque (Nominal / Maximum): .295 / .442 ft-lb (0.4 / 0.6 Nm). Component Parts ST 1F 000 Socket without LED ST 1F L24 Socket with LED for 12-24VDC. ST 16 016 Mounting frame for relay, without marking ST 17 002 Jumper bar, 2 pole ST 17 005 Jumper bar, 5 pole ST 17 010 Jumper bar, 10 pole ST 16 040 Marking plate, consiting of 100 marking tags Sets - Relay in frame, mounted in socket ST 1P3 024 24VDC, AgSnO contacts 2 ST 1P3 L12 12VDC, with LED, AgSnO contacts 2 ST 1P3 L24 24VDC, with LED, AgSnO contacts 2 ST 1P3 L48 48VDC, with LED, AgSnO contacts 2 ST 1P2 L24 24VDC, with LED, Au plated AgSnO contacts 2 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 411 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RY II series 8 Amp Miniature Printed Circuit Board Relay File E214025 NR 10071 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data • 1 Form A (SPST-NO) and1 Form C (SPDT). Termination: Printed circuit terminals. Sockets available. • 8 amp rated current. Enclosure (94 V-0 rated): Flux-tight (RT II) or sealed (RTIII) plastic case. • Sensitive coil 220 mW. Weight: 0.28 oz. (8 g) approximately. • 12.3 mm height. • 8 mm coil to contact spacing. • Flux-tight and washable (sealed) versions. Contact Data @ 70°C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT), single contact. Contact Life Material: Silver-cadmium oxide; Silver-tin oxide; and Silver-nickel 0.15 with or without gold plating. Expected Mechanical Life: 30 million operations minimum. Ratings: Current: 8A Voltage: 250VAC. Power (breaking): 2,000 VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): 30A. UL508 @ 70°C (RY610 type) 8 amp 28VDC 30,000 ops. 280mA 250VDC 30,000 ops. 1/2 HP 240VAC. 1/4 HP 277VAC. B300 120 or 240VAC VDE 0631 @ 85°C (RY531 type) 6 (4) amp, 250VAC 100,000 ops. Max. DC Load Breaking Capacity Initial Dielectric Strength Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 5,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20°C Nominal Coil Power: 220mW. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in Ohms Voltage Voltage Voltage Current VDC ±10% VDC VDC VDC (mA) 5 113 3.5 0.5 11.8 44.0 6 164 4.2 0.6 14.1 36.7 12 620 8.4 1.2 28.2 19.3 24 2,350 16.8 2.4 56.4 10.2 Coil Operating Range 48 9,600 33.6 4.8 112.8 5.0 Operate Data Must Operate Voltage: See Coil Data table. Operate Time : 7 ms, at nom. voltage. Release Time: 3 ms, at nom. voltage. Bounce Time (N/O contact) : 1 ms, at nom. voltage. Switching Rate: 3,600 ops./hr. max. at rated load. Nominal coil voltage (Un) Environmental Data Temperature Range: Operating: -40°C to +85°C. Vibration: (10 to 500 Hz.) 5g. Shock (destructive): >100g. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 412 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RY 6 1 0 012 1. Basic Series: RY = RY II miniature printed circuit board relay. 2.Version: 2 = Flux-tight, pins on 3.2 mm spacing. Only available with contact arrangement 1. 5 = Flux-tight, pins on 5 mm spacing. Only available with contact arrangement 3. 6 = Sealed, pins on 3.2 mm spacing. Only available with contact arrangement 1. A = Sealed, pins on 5 mm spacing. Only available with contact arrangement 3. 3. Contact Arrangement: 1 = 1 Form C (SPDT) Only available with 3.2 mm pin spacing. 3 = 1 Form A (SPST-NO) Only available with 5 mm pin spacing. 4. Contact Material: 0 = Silver-cadmium oxide. 2 = Silver-nickel 0.15 with gold plating 1 = Silver-nickel 0.15 3 = Silver-tin oxide. 5. Coil Voltage: 005 = 5VDC 012 = 12VDC 048 = 48VDC 006 = 6VDC 024 = 24VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions 1.12 .398 1.12 .398 (10.1) (28.5) (28.5) (10.1) .484 .484 (12.3) (12.3) .075 .128 .126 .126 (1.9) (3.25) (3.2) (3.2) 1 Form C, 3.2mm pin spacing 1 Form A, 5mm pin spacing PC Board Layouts & Wiring Diagrams (Bottom Views) .098 - .1 GRID .051 + .004 DIA. .098 - .1 GRID .051 + .004 DIA. (2.5 - 2.54) (2.5 - 2.54) (1.3 + .1) (1.3 + .1) .075 .744 .126 .128 .744 .198 (1.9) (18.9) (3.2) (3.25) (18.9) (5.04) 1 Form C, 3.2mm pin spacing 1 Form A, 5mm pin spacing Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 413 specified. Refer to inside back cover. 200 W 100 W 50 W 25 W Catalog 1308242 Issued 3-03 P&B Sensitive, Low Profile, Hi-Current Relay Designed to Meet International Standards T75 series 14 Amp, PC Board Miniature Relay File E29244 File LR45064 File No. 3919 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Dielectric Strength • High sensitivity – nominal coil power requirement is as low as 212mW. Between Open Contacts: 1,000V rms. 2 2 • Low profile, .591 in. (15mm) tall case uses only .465 in (3cm ) of area on Between Contacts and Coil: 4,000V rms, 8mm. the printed circuit board, permitting high density circuit design. • Power switching capability – contacts rated 14 amps in 1 Form A (SPST- NO) or 1 Form C (SPDT) arrangements. • Designed to meet UL, CSA, VDE, SEMKO and SEV requirements. • Designed to meet VDE 8mm spacing, 4kV dielectric, coil to contacts. Coil Data • Designed to meet 3 mm creepage between contacts. • Conforms to: VDE 0110 – Insulation Group C (250V) Voltage: 3 to 60VDC. VDE 435 Part 201 – High current applications Maximum Power @ 25°C: 1W. VDE 0804 – Telecommunications equipment Nominal Power @ 25°C: 230mW, typ. VDE 0631 – Temperature controllers and limiters Temperature Rise: 85C° per Watt. VDE 0700 – Household appliances Duty Cycle: Continuous. VDE 0805/5.90 – Office machines § • Immersion cleanable , ultrasonically sealed case. • Well suited for a broad range of applications e.g. HVAC, appliances, Coil Data security and industrial control. DC Must Nominal § For more details, refer to application note 13C265, “Mounting, Termination and Cleaning of Nominal Resistance Operate Coil PC Board Relays.” Voltage in Ohms Voltage Current Contact Ratings @ 25°C with relay properly vented. ±10% (mA) Remove vent nib after soldering and cleaning. 3 40 2.1 75.0 5 118 3.6 42.4 Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). 6 165 4.3 36.4 Material: Silver-cadmium oxide. DC 9 365 6.4 24.7 Expected Mechanical Life: 20 million operations. Coils 12 650 8.5 18.5 Expected Electrical Life: 18 1,455 12.8 12.4 100,000 operations at 8 amps, 240VAC. 24 2,270 17.2 10.6 50,000 operations at 14 amps NO / 5 amps NC, 120VAC Res. 36 5,460 25.4 6.4 30,000 operations at 7.2 FLA, 45 LRA, 120VAC. 48 8,790 34.5 5.5 10,000 operations at 5 FLA, 30 LRA, 240VAC. 60 15,265 42.8 3.9 30,000 operations at B300 pilot duty (360VA, 240VAC; 470VA, 120VAC). Contact Ratings (See Figure 1): Maximum Switched Voltage: 380VAC. Maximum Switched Current: 14/5 (N.O./N.C.) amps, AC resistive; 8 amps DC (see Fig. 1) Operate Data @ 25°C Maximum Switched Power: 200W, DC; 2,000VA, AC. Minimum Required Contact Load: 12V, 100mA. Must Operate Voltage: 72% of nom. voltage or less. VDE Contact Ratings: 8 amps, 250VAC. Must Release Voltage: 10% of nom. voltage or more. UL/CSA Contact Ratings: 10 amps, 240VAC; 8 amps 24VDC; Operate Time (Excluding Bounce): 6 ms, typ., at nom. voltage. 1/3 HP, 120VAC; 1/2 HP, 240VAC. Release Time (Excluding Bounce): 2.5 ms, typ., at nom. voltage. Maximum Switching Rate: 20 operations/second. Figure 1 - DC Switching Load Limit Curve Maximum Continuous Operating Voltage: 225% of nom. voltage. 300 200 ENVIRONMENTAL DATA Temperature Range 100 Storage: -40°C to +130°C. Operating: -40°C to +70°C. 50 40 30 20 Mechanical Data Termination: Printed circuit terminals. 10 Enclosures: Immersion cleanable, plastic sealed case. .1 1 10 100 Weight: 0.65 oz. (18.5g) approximately. Switching Current (Amps DC) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 414 specified. Refer to inside back cover. Switching Voltage (VDC) Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B T75 S 5 D 1 1 2 -12 1. Basic Series: T75 = Low profile, printed circuit board relay. 2. Enclosure: S = Immersion cleanable, plastic sealed case. 3. Contact Arrangement: 1 = 1 Form A (SPST-NO) 5 = 1 Form C (SPDT) 4. Coil Input: D = DC voltage 5. Coil Configuration: 1 = Single coil, non-latching (monostable) 6. Mounting and Terminals: 1 = Printed circuit terminals 7. Contact Material: 2 = Silver-cadmium oxide (AgCdO) 8. Coil Voltage: 03 = 3VDC 06 = 6VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 05 = 5VDC 09 = 9VDC 18 = 18VDC 36 = 36VDC 60 = 60VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T75S5D112-05 T75S5D112-12 T75S5D112-24 Outline Dimensions Wiring Diagram (Bottom View) FORM A FORM C .591 .150 1.126 MAX. 1.181 MAX. * (15) (3.8) (28.6) (30) .394 *ON SINGLE THROW MODELS, (10) ONLY NECESSARY TERMINALS ARE PRESENT. CONTACT TERMINALS: .023 x .040 (.58 x 1.02) REF. COIL TERMINALS: .024 (.61) DIA. REF. PC Board Layouts (Bottom Views) 1 Form C 1 Form A .051 DIA. TYP. .051 DIA. TYP. (1.3) (1.3) .300 .300 (7.6) (7.6) .126 .110 .197 .110 (3.2) (2.8) (5) (2.8) .126 (3.2) .748 .748 (19) (19) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 415 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCJ series Slim 5 Amp Miniature Power PC Board Relay Air Conditioners, Refrigerators, Microwave Ovens UL File No. E82292 CSA File No. 1031444 VDE File No. 122301 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20°C • Slim outline, L20.4 x W7 x H15 (mm). PCJ • 1 Form A (SPST-NO) contact arrangement. Rated Coil Nominal Coil Must Operate Must Release • High dielectric capacity of 4kV. Voltage Current Resistance Voltage Voltage • UL, CSA, VDE approvals. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Immersion cleanable, sealed version available. • Cadmium-free contacts. 5 40.0 125 3.75 0.25 6 33.3 180 4.50 0.30 9 22.5 405 6.75 0.45 Contact Data @ 20°C 12 16.7 720 9.00 0.60 Arrangements: 1 Form A (SPST-NO). 18 11.1 1,620 13.50 0.90 Material: Ag Alloy. 24 8.6 2,880 18.00 1.20 Max. Switching Rate: 300 ops./ min. (no load). 20 ops./ min. (rated load). Expected Mechanical Life: 5 million ops (no load). Expected Electrical Life: 100,000 ops (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100Mohms @ 1A, 6VDC. Operate Data @ 20°C Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 10ms max. Contact Ratings Release Time: 4ms max. Ratings: 5A @ 250VAC resistive. Max. Switched Voltage: AC: 275V. DC: 30V. Max. Switched Current: 5A. Max. Switched Power: 1,250VA, 150W. Environmental Data Temperature Range: Initial Dielectric Strength Operating: -30°C to + 70°C. Between Open Contacts: 750VAC, 50/60 Hz. (1 min.). Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude. Between Contacts and Coil: 4,,000VAC, 50/60 Hz. (1 min.). Operational: 10 to 55Hz., 1.5mm double amplitude. Surge Voltage Between Coil and Contacts: 7,000V (1.2/50μs). 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Operational: 100m/s (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Conductors: 1,000Mohm @ 500VDCM. Coil Data Voltage: 5 to 24VDC. Duty Cycle: Continuous. Mechanical Data Nominal Power: 200mW. Termination: Printed circuit terminals. Max. Coil Power: 130% of nominal. Weight: 0.14 oz. (4g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 416 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B PCJ -1 05 D 3 M H ,000 1. Basic Series: PCJ = Miniature 1 Form A relay 2. Termination: 1 = 1 pole 3. Coil Voltage: 05 = 5VDC 09 = 9VDC 18 = 18VDC 06 = 6VDC 12 = 12VDC 24 = 24VDC 4. Coil Input: D = Standard 200mW 5. Contact Material: 3 = AgNi 6. Contact Arrangement: M = 1 Form A (NO) 7. Enclosure: Blank = Vented (Flux-tight) cover H = Sealed plastic case 8. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PCJ-105D3MH,000 PCJ-112D3MH,000 PCJ-124D3MH,000 Outline Dimensions Wiring Diagram (Bottom View) .59 (15.0) .126 (3.2) .009 .007 .012 .02 .02 (.3) (.24) (.18) (.5) (.5) .275 .045 .453 (1.15) (11.5) (7.0) PC Board Layout (Bottom View) .185 .275 .453 .275 (4.70) (7.0) (11.5) (7.0) .041 .803 (1.05) .185 (20.4) (4.70) Reference Data Coil Temperature Rise Operate Time Life Expectancy 4.5 50 100 100 4.0 40 3.5 3.0 30 Operate Time 2.5 10 10 2.0 20 1.5 Release Time 1.0 10 0.5 0 0.0 1 0.2 0.3 0.4 0.6 23 4 5 6 0 0.1 0.5 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Coil Power (W) Coil Power (W) Contact Current (A) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 417 specified. Refer to inside back cover. Temp. Rise (°C) Time (msec) 4 Operation (x10 ) Catalog 1308242 Issued 3-03 OEG PCH series 5 - 10 Amp Miniature 1 Form A or C Power PC Board Relay Air Conditioners, Refrigerators, Microwave Ovens UL File No. E82292 CSA File No. LR48471 VDE File No. 119568 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20°C • 1 Form A (SPST-NO) or 1 Form C (SPDT) contact arrangements. • 5 or 10A ratings. 200mW Coils (Only available with 1 Form A contact arrangements) • Compact size 20L x 10W x 15.2H (mm). Rated Coil Nominal Coil Must Operate Must Release • High surge voltage of 8000V. Voltage Current Resistance Voltage Voltage • Cadmium-free contacts. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Sensitive (200mW) coil available on 1 Form A types. 5 40.0 125 3.75 0.25 • UL, CSA, VDE approval. 6 30.0 180 4.50 0.30 9 22.5 400 6.75 0.45 12 16.7 720 9.00 0.60 Contact Data @ 20°C 24 8.6 2,800 18.00 1.20 Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: AgSnO. 400mW Coils Max. Switching Rate: 300ops./ min. (no load). Rated Coil Nominal Coil Must Operate Must Release 20ops./ min. (rated load). Voltage Current Resistance Voltage Voltage Expected Mechanical Life: 5 million ops (no load). (VDC) (mA) (ohms) ± 10% (VDC) (VDC) Expected Electrical Life: 100,000ops (rated load). Minimum Load: 100mA @ 5VDC. 5 80.0 62.5 3.75 0.25 Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. 6 66.7 90.0 4.50 0.30 9 44.4 202.5 6.75 0.45 12 33.3 360.0 9.00 0.60 Contact Ratings 18 22.2 810.0 13.50 0.90 24 11.1 1,440.0 18.00 1.20 Ratings: Models with 1 Form C Contacts, 400mW Coil 48 5.6 5,760.0 36.00 2.40 5A (NO) /3A (NC) @ 30VDC resistive. 5A (NO) /3A (NC) @ 277VAC resistive. 10A (NO) @ 125VAC resistive. TV-3 (NO). Operate Data @ 20°C Models with 1 Form A Contacts, 400mW Coil Must Operate Voltage: 75% of nominal voltage or less. 5A @ 277VAC/30VDC resistive. Must Release Voltage: 5% of nominal voltage or more. 10A @ 125VAC resistive. Operate Time: 10ms max. TV-3. Release Time: 5ms max. Models with 1 Form A Contacts, 200mW Coil 5A @ 277VAC/30VDC resistive. 10A @ 125VAC resistive. Max. Switched Voltage: AC: 277V. Environmental Data DC: 30V. Max. Switched Current: 10A (NO) / 3A(NC). Temperature Range: Max. Switched Power: 1400VA, 150W (NO); 850VA, 90W (NC). Operating: Models with Class F insulation: -30°C to +85°C. Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude. Operational: 10 to 55Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). Initial Dielectric Strength 2 Operational: 100m/s (10G approximately). Between Open Contacts: 750VAC, 50/60 Hz. (1 min.). Operating Humidity: 20 to 85% RH. (Non-condensing). Between Contacts and Coil: 4,000VAC, 50/60 Hz. (1 min.). Surge Voltage Between Coil and Contacts: 8,000V (1.2/50μs). Initial Insulation Resistance Mechanical Data Between Mutually Insulated Conductors: 1000Mohm @ 500VDCM. Termination: Printed circuit terminals. Weight: 0.25 oz (7g) approximately. Coil Data Voltage: 5 to 48VDC. Duty Cycle: Continuous. Nominal Power: 200mW or 400mW. Max. Coil Power: 130% of nominal. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 418 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B PCH -1 12 D 2 H ,001 1. Basic Series: PCH = Miniature 1 Form C relay 2. Termination: 1 = 1 pole 3. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 4. Coil Input: D = Standard 400mW L = Sensitive 200mW (Only available with 1 Form A contacts) 5. Contact Material: 2 = AgSnO 6. Contact Arrangement: Blank = 1 Form C (Only available with Standard 400mW coil) M = 1 Form A 7. Enclosure: Blank = Vented (Flux-tight) cover H = Sealed plastic case 8. Insulation class: Blank = Class 155(F) system 9. Option: ,001 = Standard model Other Suffix = Special options Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PCH-105D2H,001 PCH-124D2H,001 PCH-112D2H,001 Outline Dimensions Wiring Diagram (Bottom View) .78 .39 (19.8) (9.90) .598 (15.2) NOTE: Only necessary terminals are present on 1 Form A models. .157 (4.0) PC Board Layout (Bottom View) .008 .018 .031 .031 (.2) (.45) (.8) .200 .009 (.8) 2 – .047 .400 .031 (.24) (5.08) (10.16) (1.20) (.8) .400 .200 (10.16) 3 – .059 (5.08) (1.50) .300 (7.6) .300 (7.6) .100 (2.54) .100 .043 NOTE: Only necessary terminals are present on 1 Form A models. (2.54) (1.10) Reference Data (Typical Values) (Only applicable for 1 Form C, 400mW coil model with 277VAC load on NO) Coil Temperature Rise Operate Time Life Expectancy 70 100 6.0 60 5.0 50 Operate Time 4.0 40 3.0 10 30 2.0 20 1.0 10 Release Time 0 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 1 0.32 0.4 0.48 0.56 0.6 0.72 0 1 2 34 5 6 7 8 910 Coil Power (W) Coil Power (W) Contact Current (A) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 419 specified. Refer to inside back cover. Temp. Rise (°C) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 P&B T77 series 10 Amp Miniature PC Board Relay File E29244 File LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20°C • Small size for high density PC board mounting. Voltage: 3 to 24VDC. Nominal Coil Power: Contact rating 3 = 200mW. • 1 Form A contact arrangements. • Creepage spacings of 6.5mm between contact and coil. Contact rating 10 = 450mW. Coil Temperature Rise: Contact rating 3 = 35°C max. • Ideal for appliance, office equipment. • 4,000VAC dielectric strength between contact and coil. Contact rating 10 = 40°C max. Max. Coil Power: 120% of nominal. • UL Class F (155°C) approved insulation system. Duty Cycle: Continuous. Coil Data @ 20°C Contact Data @ 20°C Rated Coil Must Must Arrangements: 1 Form A (SPST-NO). Coil Resistance Operate Release Material: Contact rating 3 - Silver. Voltage (Ohms) ±10% Voltage Voltage Contact rating 10 - Silver alloy. (VDC) (VDC) (VDC) Contact Rating 3 Contact Rating 10 Max. Switching Rate: 300 ops./min. (no load). 3 45 20 2.25 0.15 30 ops./min. (rated load). 5 125 55 3.75 0.25 Expected Mechanical Life: 10 million operations. 12 720 320 9.00 0.60 Expected Electrical Life: 100,000 operations. 24 2,800 1,280 18.00 1.20 Minimum Contact Load: 10mA @ 5VDC. Initial Contact Resistance: 100 milliohms max. @ 100mA, 6VDC. Contact Ratings @ 20°C with relay properly vented. Remove vent nib after soldering and cleaning. Contact UL/CSA Ratings Type Operations Rating Operate Data @ 20°C Operate Time: 10 ms, max. (excluding bounce). 3 3A @ 277VAC Resistive 6,000 10LRA/1.5FLA @ 120VAC Motor 30,000** Release Time: 4 ms, max. (excluding bounce). 5.4LRA/0.9FLA @ 240VAC Motor 30,000** 3LRA/1.5FLA @ 120VAC Motor 100,000* 3A @ 250VAC Resistive 100,000 3A @ 250VAC UL General Purpose 100,000 3A @ 30VDC Resistive 100,000 2A @ 120VAC Gen. Purpose 100,000*** 3A @ 120VAC Resistive 100,000*** 10 10LRA/1.5FLA @ 120VAC Motor 30,000** Environmental Data 5.4LRA/0.9FLA @ 240VAC Motor 30,000** Temperature Range: Storage: -40°C to +130°C. 10A @ 250VAC Resistive 100,000 Operating: -30°C to +55°C. 10A @ 30VDC Resistive 100,000 Contact Rating 3: -40°C to +80°C. 10A @ 250VAC UL General Purpose 200,000 Contact Rating 10: -40°C to +55°C. Vibration: Mechanical: 10 to 55 Hz., 1.5mm double amplitude. *Denotes test at 70°C ambient temperature. Operational: 10 to 55 Hz., 1.5mm double amplitude. **Denotes test at 85°C ambient temperature. Shock: Mechanical: 100g min. ***Denotes test at 105°C ambient temperature. Operational: 10g min. Operating Humidity: 45 to 85% RH. Initial Dielectric Strength Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 4,000VAC 50/60 Hz. (1 minute). Mechanical Data Termination: Printed circuit board. Enclosures (94V-0 Flammability Ratings): T77S: Immersion cleanable. Initial Insulation Resistance T77V: Vented, flux-tight, plastic cover. 8 Between Mutually Insulated Elements: 10 ohms, min. @ 500VDC. Weight: 0.36 oz. (9g). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 420 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Figure 1 - Coil Temperature Rise Operate Time Life Expectancy 100 12 60 Contact Rating 10, 120VAC Res. 10 50 40 8 10 30 6 Operate Time 20 4 Contact Rating 3, 250VAC Res. 2 10 Release Time 1 0.2 0.2 0.1 0.3 0.4 0.5 0.6 0.7 0.1 0.3 0.4 0.5 0.6 0.7 0 1 2 34 5 6 7 8 910 Coil Power (W) Contact Current (A) Coil Power (W) Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Ordering Information Typical Part Number B T77 V 1 D 10 -24 1. Basic Series: T77 = Miniature PCB relay. 2. Enclosure: V = Vented (Flux-tight)* S = Immersion cleanable case 3. Contact Arrangement: 1 = (SPST-NO) 4. Coil Input: D = DC Voltage 5. Contact Rating: 3 = 3A 10 = 10A 6. Coil Voltage: 03 = 3VDC 05 = 5VDC 12 = 12VDC 24 = 24VDC *Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T77V1D3-12 T77V1D10-12 T77S1D3-12 T77S1D10-12 T77V1D3-24 T77V1D10-24 T77S1D3-24 T77S1D10-24 Outline Dimensions Wiring Diagram (Bottom View) 1 Form A .716 .40 (18.20) (10.20) .57 (14.70) 2 PLACES .16 2 PLACES .017 X .017 (4.0) .04 X .011 (.45 X .45) (1.0 X .30) Suggested PC Board Layout (Bottom View) 4 - .051(1.3)Ş .30 (7.6) .100 .50 (2.54) (12.7) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 421 specified. Refer to inside back cover. Temp. Rise (Deg.) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG OJ/OJE series 3-10 Amp Miniature, PC Board Relay Appliances, HVAC, Industrial Control. UL File No. E82292 CSA File No. LR48471 VDE File No. 10080 TUV File No. R75081 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features OJ/OJE-L Sensitive • Miniature size 18.2 x 10.2 x 14.7h. • 1 Form A (SPST-NO) contact arrangement. Rated Coil Nominal Coil Must Operate Must Release • Designed to meet UL, CSA, VDE, TUV requirements. Voltage Current Resistance Voltage Voltage (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Designed to meet 4kV dielectric between coil and contacts (OJ). • Sensitive and standard coils available. 5 40.0 125 3.75 0.25 • Immersion cleanable, sealed version available. 6 33.3 180 4.50 0.30 9 22.5 400 6.75 0.45 Contact Data @ 20°C 12 16.7 720 9.00 0.60 Arrangements: 1 Form A (SPST-NO). 24 8.6 2,800 18.00 1.20 Material: Ag, Ag Alloy. OJ/OJE-D and -H Standard Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Rated Coil Nominal Coil Must Operate Must Release Expected Mechanical Life: 10 million operations (no load). Voltage Current Resistance Voltage Voltage Expected Electrical Life: 100,000 operations (rated load). (VDC) (mA) (ohms) ± 10% (VDC) (VDC) Minimum Load: 100mA @5VDC. 5 91.0 55 3.50 0.25 Initial Contact Resistance: 100 milliohms @ 1A,6VDC. 6 75.0 80 4.20 0.30 9 50.0 180 6.30 0.45 Contact Ratings 12 37.5 320 8.40 0.60 Ratings: OJ/OJE-LM: 3A @ 250VAC resistive, 24 18.8 1,280 16.80 1.20 48 9.4 5,100 33.60 2.40 3A @ 28VDC resistive. OJ/OJE-LMH: 8A @ 250VAC resistive, 8A @ 28VDC resistive. OJ/OJE-DM: 5A @ 250VAC resistive, Operate Data 5A @ 28VDC resistive. OJ/OJE-HM: 10A @ 250VAC resistive, Must Operate Voltage: 10A @ 28VDC resistive. OJ/OJE -L: 75% of nominal voltage or less. Max. Switched Voltage: AC: 265V. OJ/OJE -D and -H: 70% of nominal voltage or less. DC: 30V. Must Release Voltage: Max. Switched Power: OJ/OJE -L: 5% of nominal voltage or more. OJ/OJE-LM: 720VA, 90W OJ/OJE -D and -H: 5% of nominal voltage or more. OJ/OJE-LMH: 1,800VA, 200W OJ/OJE-DM: 1,200VA, 150W Operate Time: OJ/OJE -L: 15 ms max. OJ/OJE-HM: 2,500VA, 280W OJ/OJE -D and -H: 10 ms max. Release Time: 4 ms max. Note: Consult factory regarding TV-5 rated models. Initial Dielectric Strength Environmental Data Between Open Contacts: Temperature Range: OJ: 750VAC 50/60 Hz. (1 minute). Operating: OJ/OJE-L: -30°C to +80°C OJE: 750VAC 50/60 Hz. (1 minute). OJ/OJE-D and -H: -30°C to +60°C. Between Coil and Contacts: Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude OJ: 4,000VAC 50/60 Hz. (1 minute). Operational: 10 to 55 Hz., 1.5mm double amplitude. OJE: 3,000VAC 50/60 Hz. (1 minute). 2 Shock, Mechanical: 1,000m/s (100G approximately). Surge Voltage Between Coil and Contacts: 2 Operational: 100m/s (10G approximately). OJ: 10,000V (1.2/50μs). Operating Humidity: 20 to 85% RH. (Non-condensing). OJE: 5,000V (1.2/50μs). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Coil Data Mechanical Data Voltage: 5 to 48VDC. Termination: Printed circuit terminals. Nominal Power: OJ/OJE-LM and LMH: 200 mW. Enclosure (94V-0 Flammability Ratings): OJ/OJE-DMand HM: 450 mW. OJ/OJE-SS: Vented (Flux-tight), plastic cover. Coil Temperature Rise: OJ/OJE-SH: Sealed, plastic case. OJ/OJE-LM and LMH : 30°C max., at rated coil voltage. Weight: 0.32 oz (9g) approximately. OJ/OJE-DM and HM: 40°C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 422 Refer to inside back cover. specified. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OJE -SH -1 12 L M H ,095 1. Basic Series: OJ = 4kV dielectric, coil and contacts. OJE = 3kV dielectric, coil and contacts. 2. Enclosure: SS = Vented (Flux-tight)*, plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input/Contact Rating: L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts H = Standard (450mW) Coil, 10A Contacts 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. High Capacity Contact Rating Option for Sensitive Coil: H = 8A Contacts (Only available with Coil Input/Contact Rating code "L"). 8. Suffix: ,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model * Not suitable for immersion cleaning processes. ** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information. Our authorized distributors are more likely to stock the following items for immediate delivery. OJE-SH-124LMH,095 OJ-SH-105HM,095 OJE-SH-105DM,095 OJE-SH-112HM,095 OJ-SH-112LMH,095 OJE-SH-112DM,095 OJE-SH-105LMH,095 OJ-SH-124LMH,095 OJE-SH-124DM,095 OJE-SH-112LMH,095 Wiring Diagram (Bottom View) Outline Dimensions .58 ± .02 (14.7 ± .5) .157 ± .012 (4.00 ± .3) .012 .018 x .018 (.3) (.45 x .45) .039 .039 .012 PC Board Layout (Bottom View) (.3) (1.0) (1.0) 4 – .05 DIA (1.3) .067 .401 ± .02 (1.71) (10.2 ± .5) .300 ± .008 (7.62 ± .2) .300 ± .004 (7.6 ± .1) .067 (1.71) .500 ± .008 (12.70 ± .2) .100 ± .004 .500 ± .004 .1 ± .008 (2.54 ± .1) (12.7 ± .1) .716 ± .02 (2.54 ± .2) (18.2 ± .5) Reference Data Coil Temperature Rise Operate Time Life Expectancy 100 12 60 HM type, 120VAC Res. 10 50 LMH type, 250VAC Res. 40 8 10 30 6 Operate Time 20 4 LM type, 250VAC Res. 2 10 DM type, 250VAC Res. Release Time 1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0 1 2 34 5 6 7 8 910 Coil Power (W) Contact Current (A) Coil Power (W) Test relay: OJE-SH-112LMH Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 423 specified. Refer to inside back cover. Temp. Rise (°C) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG PCD/PCDF series 15 Amp Low Profile Power PC Board Relay Appliances, HVAC, Office Machines UL File No. E82292 CSA File No. LR48471 TUV File No. R9751117 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features • Low profile (10mm), 15 Amp switching capacity. PCD &PCDF • 1 Form A contact arrangement. Rated Coil Nominal Coil Must Operate Must Release • Sensitive 200mW coil (250mW on 48VDC coil). Voltage Current Resistance Voltage Voltage • Immersion cleanable, sealed version available. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Quick connect terminals available (PCDF). 5 40.0 125 3.75 0.50 6 33.3 180 4.50 0.60 9 22.5 400 6.75 0.90 12 17.0 720 9.00 1.20 Contact Data @ 20°C 24 8.6 2,880 18.00 2.40 Arrangements: 1 Form A (SPST-NO). 48 5.2 9,200 36.00 4.80 Material: AgSnO. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Contact Ratings Operate Time:15 ms max. Ratings: 15A @ 125VAC resistive (PCDF only, load must be carried Release Time: 8 ms max. through QC terminals to achieve this rating), 10A @ 250VAC resistive, 10A @ 24VDC resistive. 5A @ 125VAC inductive (cosş= 0.4, L/R=7msec), 5A @ 24VDC inductive (cosş= 0.4, L/R=7msec). Environmental Data Max. Switched Voltage: AC: 250V. Temperature Range: DC: 24V. Operating:-30°C to +70°C Max. Switched Current: 15A. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Max. Switched Power: 1,800VA, 240W. Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Operational: 100m/s (10G approximately). Initial Dielectric Strength Operating Humidity: 20 to 85% RH. (Non-condensing). Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 2,500VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 5,000V (1.2 / 50μs). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Mechanical Data Termination: PCD: Printed circuit terminals. PCDF: Printed circuit terminals and quick connect terminals. Coil Data Enclosure (94V-0 Flammability Ratings): Sealed plastic case. Voltage: 5 to 48VDC. Weight: PCD: 0.31 oz (9g) approximately. Nominal Power: 200 mW except 48VDC coil (250mW). PCDF: 0.35 oz (10g) approximately. Coil Temperature Rise: 20°C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 424 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B PCD -1 24 D 1 M H ,000 1. Basic Series: PCD = PC Board Terminals. PCDF = Quick Connect Terminals. 2. Termination: 1 = 1 pole 3. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 4. Coil Input: D = Standard 5. Contact Material: 1 = AgSnO 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Enclosure: Blank = Vented (Flux-tight)* plastic cover H = Sealed plastic case 8. Suffix: ,000 = PCD standard model ,S000 = PCDF standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. .248 Outline Dimensions (6.3) .187 .051 DIA (4.75) (1.3) PCDF PCD .634 ± .008 .126 (16.1 ± .2) .25 (3.2) (6.35) .402 ± .008 .402 ± .02 .533± .012 (10.2 ± .2) (10.2 ± .5) (13.55 ± .3) .138 ± .012 .197 ± .008 .047 .018 (3.5 ± .3) .071 (5.0 ± .2) .047 .138 ± .012 (1.2) (.45) (1.8) (1.2) (3.5 ± .3) .018 .047 .807 ± .012 (.45) (1.2) (20.5 ± .3) .905 ± .02 .024 ± .004 .98 ± .008 (23.0 ± .5) (.6 ± .1) (25.0 ± .2) .012 .059 (.3) (1.5) .075 .197 ± .008 (1.9) (5.0 ± .2) .634 ± .02 .905 ± .008 (16.1 ± .5) .500 ± .008 (23.0 ± .2) .02 (12.7 ± .2) .56 ± .008 (.5) .700 ± .008 (14.25 ± .2) .02 (17.78 ± .2) (.5) .40 ± .008 .118 ± .008 (10.16 ± .2) (3.0 ± .2) .700 ± .008 .153 .012 (17.78 ± .2) (3.89) (.3) Wiring Diagrams PC Board Layouts (Bottom View) .063 DIA PCDF 2 — .039 DIA PCD PCD PCDF .400 (1.6) (1.0) (10.16) .118 .153 .236 .059 .197 (3.0) (3.89) .079 (.6) (1.5) (5.0) (2.0) .56 .700 .500 (14.25) (12.7) (17.78) 2 — .039 DI A .039 .075 .061 (1.0) (1.0) .118 .700 (1.9) (1.55) (Bottom View) (Top View) (Bottom View) (3.0) (17.78) Reference Data Coil Temperature Rise Operate Time Life Expectancy 180 12 100 10A Maximum 160 Allowable 15A 10 Coil Voltage 125VAC Resistive 140 Operating 8 120 Votage Range Operate Time 100 10A 15A 6 10 80 24VDC Resistive Cool Coil 60 4 Hot Coil Applied 40 Pick-Up Voltage 2 Release Time 20 1 0 0.4 0.2 0.6 0.8 1.0 1.2 1.4 -40 -20 0 20 40 60 80 100 120 140 0 2 46 8 1012 14 16 18 20 Ambient T emp. (°C) Coil Power (W) Contact Current (A) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 425 specified. Refer to inside back cover. % of Supplying Voltage to Coil Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 SCHRACK PB series 10 Amp, PC Board Miniature Relay File E214025 File 4570-4940-0042 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data Temperature Range (Operating): PB1 or PB3: -40°C to +85°C. • Small size for high density PC board mounting. • 1 Form A and 1 Form C contact arrangements. PBH: -20°C to +105°C. Vibration: 30 to 400 Hz., 4g's, min. • Creepage/clearance to VDE 0435 and VDE 0700. • 2,500Vrms dielectric strength between contact and coil. Shock: Mechanical (Destruction): 30g min. Protection Category: IP 54 • UL Class F approved insulation system. • Low-complexity design for enhanced reliability. • High-temperature version available. Mechanical Data Termination: Printed circuit board. Contact Data Enclosure: Splash-resistant (unsealed) plastic case (UL Flammability Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Class V-0). Material: Silver nickel 90/10. Weight: 0.2 oz. (5.4g). Max. Switching Rate: 6,000 ops./min. (minimum load). 600 ops./min. (rated load). Contact Life (PB1 & PB3) Expected Mechanical Life: 5 million operations. Expected Electrical Life : PB1 &PB3 @85°C: 100,000 operations @ 6A, 240VAC (NO). 25,000 operations @ 10A, 240VAC (NO). 25,000 operations @ 10A/3A, 240VAC (NO/NC). 1,000 operations @ 10A/10A, 240VAC (NO/NC). PBH @105°C: 250,000 operations @ 2A, 240VAC (NO). 150,000 operations @ 5A, 240VAC (NO). 100,000 operations @ 6A/6A, 240VAC (NO/NC). Maximum Contact Rating: PB1 &PB3: NO (Make) 10A / NC (Break) 3A. PBH: 6A (mtg. space 3mm); 4A (dense pack). Maximum Switching Voltage: PB1 &PB3: 250VAC, 100 VDC. PBH: 250VAC Maximum Make Current (All): 15A (max. 4 sec at 10% duty cycle.) Maximum Breaking Capacity: PB1 &PB3: 750VA (NC contact) / 2,500VA (NO contact). PBH: 1,500VA. Initial Dielectric Strength Max. DC Load Breaking Capacity (PB1 & PB3) Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 2,500Vrms. Surge Voltage Resistance Between Coil and Contacts: 4,000Vrms. Clearance / Creeepage Distance: 3 mm / 4 mm. Initial Insulation Resistance 8 Between Mutually Insulated Elements: 10 ohms. Tracking Resistance of Relay Base: PB1: CTI 250 PB3: CTI 300 Insulation to VDE 0110b (2/79): Category C / Reference Voltage 250. Coil Data @ 20°C Voltage: 5, 6, 9, 12, 24 and 36VDC. Nominal Coil Power: 360mW. Operate Coil Power: 200mW. Coil Data @ 20°C Coil Operating Range (PB1 & PB3) Rated Coil Must Must Coil Coil Resistance Operate Release Current Voltage ±10% Voltage Voltage (mA) (VDC) (ohms) (VDC) (VDC) 5 70 3.75 0.5 72.0 6 100 4.5 0.6 60.0 9 225 6.75 0.9 40.0 12 400 9.0 1.2 30.0 24 1,600 18.0 2.4 15.0 36 3,600 27.0 3.6 60.0 Operate Data @ 20°C Operate/Release Time: 20 ms, max. (excluding bounce). Bounce Time: 15 ms, max. Operate Coil Power: 200mW. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 426 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B PB 1 3 4 012 1. Basic Series: PB = Miniature, 10A PC board relay. 2. Version: 1 = Standard version, CTI 250 3 = High CTI version, CTI 300 H = High Temerature (105°C) version, CTI 250 3. Contact Arrangement: 1 = 1 Form C (SPDT) 3 = 1 Form A (SPST-NO) 4. Contact Material: 4 = AgNi 90/10 4. Coil Input: 005 = 5VDC 006 = 6VDC 009 = 9VDC 012 = 12 VDC 024 = 24VDC 036 = 36VDC (Other voltages available as special order) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PB114012 PB114024 Outline Dimensions .59 .59 (15.0) (15.0) .787 (20.0) .59 (15.0) Wiring Diagram (Bottom View) Suggested PC Board Layout (Bottom View) .05 + .004 DIA. (1.3 + .1) 11 A1 12 .197 A2 .295 (5.0) 14 (7.5) .197 (5.0) .197 .049 .098 (5.0) (1.25) .246 (2.5) (6.25) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 427 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK V23148 (U/UB) series 7 Amp, Latching or Non-latching, Miniature Printed Circuit Board Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • 1 Form A (SPST-NO), 1 Form B (SPST-NC) and1 Form C (SPDT). Must Operate Voltage: See Coil Data table. • 8 amp rated current. Operate Time: 6 ms, standard model; 7 ms, sensitive model; • Standard (non-latching) or latching types. 5 ms, latching model. • Sensitive model requires 180mW to pull-in. Release (Reset) Time: 3 ms. • 2,000Vrms and 4,000Vrms contact-to-coil dielectric versions. Bounce Time (N/O contact / N/C contact) : 2 ms / 10ms. • Washable (sealed) plastic case. Switching Rate: 180,000 ops./hr. max. at rated load. Contact Data @ 70°C Environmental Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT), single contact. Temperature Range: Material: Silver-nickel 0.15. Operating: -25°C to +70°C. Expected Mechanical Life: 20 million operations. Vibration: (10 to 55 Hz.) 10g. Ratings: Shock (functional): 10g at 11ms, half-sine. Current: 7A, standard and latching types; 5A, sensitive type. Voltage: 250VAC. Power (breaking): 1,750 VA standard and latching; 1,250 VA, sensitive. Voltage (breaking): 250VAC. Current (making, max. 4s at 10% duty cycle): 12A. Standard Type 7 amp resistive, 24VDC or 250VAC, 50,000 ops 5 amp resistive, 250VAC, 150,000 ops. Latching Type Mechanical Data 7 amp resistive, 24VDC or 250VAC, 50,000 ops. Termination: Printed circuit terminals. 5 amp resistive, 250VAC, 100,000 ops. Enclosure (94 V-0 rated): Sealed (RTIII) plastic case. Sensitive Type Weight: 0.34 oz. (9.5 g) approximately. 5 amp resistive, 250VAC, 100,000 ops. 5 amp resistive, 24VDC, 30,000 ops. Initial Dielectric Strength Max. DC Load Breaking Capacity Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 2,000Vrms for standard dielectric version. 4,000Vrms for high dielectric version. Creepage/Clearance: 2.5/2.5mm for standard dielectric version. 3.5/3.5mm for high dielectric version. Surge Resistance Between Coil and Contacts: 5,000Vrms. Coil Data DC @ 20°C Nominal Coil Power: 330 - 800mW, dependent upon model. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in Ohms Voltage Voltage Voltage Current VDC ±10% VDC VDC VDC (mA) Standard, non-latching models 6 80 4.2 0.6 10.5 75.0 12 320 8.4 1.2 21.1 37.5 24 1,280 16.8 2.4 42.2 18.8 Coil Operating Range 48 3,800 33.6 4.8 72.4 5.0 Sensitive, non-latching models 6 110 4.4 0.6 12.6 54.6 12 440 8.8 1.2 25.3 27.3 24 1,780 17.5 2.4 50.6 13.5 48 4,000 35.0 4.8 76.3 12.0 DC Must Nominal Nominal Resistance Operate Reset Maximum Coil Voltage in Ohms Voltage Voltage Voltage Current VDC ±10% VDC VDC VDC (mA) Nominal coil voltage (Un) Latching models 6 33 4.7 1.5 6.2 181.8 12 119 9.4 3.0 12.4 100.8 24 475 18.7 6.0 24.7 50.5 48 1,750 37.4 12.0 49.4 27.4 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 428 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B V23148 -A 0 0 03 -C 101 1. Basic Series: V23148 = U/UB miniature printed circuit board relay. 2.Version A = Non-latching. B = Latching. 3. Dielectric Strength, Coil-to-Contacts: 0 = 2,000Vrms. 1 = 4,000Vrms. 4. Coil Sensitivity: 0 = Standard. 1 = Sensitive (Not available on latching version). 5. Coil Voltage: 03 = 6VDC 05 = 12VDC 07 = 24VDC 08 = 48VDC 6. Contact Arrangement: A = 1 Form C (SPDT) B = 1 Form A (SPST-NO) C = 1 Form B (SPST-NC) 7. Contact Material: 101 = Silver-nickel 0.15 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) .835 MAX. .638 MAX. 1 Form C (21.2) (16.2) .587 MAX. .035 (14.9) (.9) .063 .126 + .008 (1.6) (3.2 + .2) 1 Form A PC Board Layout (Bottom View) .059 + .004 DIA. .1 GRID (1.5 + .1) (2.54) 1 Form B .067 (1.7) .047 + .004 DIA. (1.2 + .1) .063 .039 + .004 DIA. (1.6) (1.0 + .1) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 429 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B T73 series Low Profile, 10 Amp Printed Circuit Board Relay File E29244 File LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features Voltage: 3 to 48VDC. • 10 amp switching capacity. Nominal Power: 450 milliwatts. • UL Class F (155°C) coil insulation system standard. 660 milliwatts for 48VDC coil. • 1 Form A and 1 Form C contact arrangements. Coil Temperature Rise: 35C° max, at rated coil voltage. • Ideal for domestic appliances, HVAC and security. Max. Coil Power: 130% of nominal. • Resists high temperature and various chemical solutions. Duty Cycle: Continuous. • Immersion cleanable, plastic sealed case available. Coil Data @ 20°C Contact Data @ 20°C Rated Coil Coil Must Operate Must Release Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Voltage Resistance Voltage Voltage Material: Silver-cadmium oxide. (VDC) (Ohms) +10% (VDC) (VDC) Max. Switching Rate: 240 ops./min. (no load). 3 20 1.95 0.15 30 ops./min. (rated load). 5 56 3.25 0.25 Expected Mechanical Life: 10 million operations. 6 80 3.90 0.30 Expected Electrical Life: 100,000 operations. 9 180 5.85 0.45 Minimum Load: 10mA @ 5VDC 12 320 7.80 0.60 Initial Contact Resistance: 100 milliohms max. @ 100mA, 6VDC. 18 720 11.7 0.90 24 1,150 15.6 1.20 Contact Ratings @ 20°C with relay properly vented. Remove vent 48 3,500 31.2 2.40 nib after soldering and cleaning. Contact Typical Ratings Type Operations Arrang. Operate Data @ 20°C 1 & 5 1/3HP NO @ 240VAC Motor 30,000 Operate Time: 10 ms (excluding bounce). 10A NO @ 120VAC Resistive 100,000 Release Time: 5 ms (excluding bounce). 6A NO @ 120VAC Resistive 100,000 6A NO @ 24VDC Resistive 100,000 10A/5A @ 120VAC Resistive 100,000 Environmental Data 1/4HP NO @ 120VAC Motor Temperature Range: Consult factory for other ratings. Storage: -40°C to +130°C. Operating: -30°C to +80°C. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Initial Dielectric Strength Shock, Mechanical: 100g min. Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Operational: 10g min. Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute). Operating Humidity: 45 to 85% RH. Mechanical Data Initial Insulation Resistance Termination: Printed circuit terminals. 8 Between Mutually Insulated Elements: 10 ohms min. @ 500VDC. Enclosure (94V-0 Flammability Ratings): Ag contact rating. Weight: 0.42 oz. (12g). Figure 1 - Coil Temperature Rise Operate Time Life Expectancy 12 100 60 28VDC Resistive 10 50 8 40 Operate Time 120VAC Resistive 30 6 10 20 4 2 10 Release Time 1 0.3 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0 8 10 0.2 0.4 0.5 0.6 0.7 0.8 2 4 6 12 Coil Power (W) Coil Power (W) Contact Current (A) Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 430 specified. Refer to inside back cover. Temp. Rise (Deg.) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B T73 S 5 D 1 5 -24 1. Basic Series: T73 = Miniature, printed circuit board relay. 2. Enclosure: V = Vented (Flux-tight)* S = Immersion cleanable, plastic sealed case. 3. Contact Arrangement: 1 = 1 Form A (SPST-NO). 5 = 1 Form C (SPDT) 4. Coil Input: D = DC voltage. 5. Relay Type: 1 = Standard coil. 6. Contact Material: 5 = Silver-Cadmium Oxide 7. Coil Voltage: 03 = 3VDC 06 = 6VDC 12 = 12VDC 24 = 24VDC 05 = 5VDC 09 = 9VDC 18 = 18VDC 48 = 48VDC * Not suitable for immersion cleaning process. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T73S5D15-05 T73S5D15-12 T73S5D15-24 Outline Dimensions .877 .693 (22.3) (17.6) .610 (15.5) 0.30 .067 (7.62 .122 (1.7) (3.1) Suggested PC Board Layouts (Bottom Views) Wiring Diagrams (Bottom Views) 1 Form A 1 Form A .700 (17.8) .200 (5.08) 2 x .051 DIA. 2 (1.3) .300 (7.62) 34 5 2 x .039 DIA. (1.0) 1 Form C 1 Form C .700 (17.8) .200 (5.08) 1 3 x .051 DIA. (1.3) 2 .500 (12.7) .300 (7.62) 34 5 2 x .039 DIA. (1.0) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 431 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG OUDH series 10 Amp Miniature, Sealed PC Board Relay Appliances, HVAC, Office Machines. UL File No. E58304 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features • Low profile miniature power relay OUDH • High density available on PC board due to small size. Rated Coil Nominal Coil Must Operate Must Release • 450mW coil available. Voltage Current Resistance Voltage Voltage • Meets 2kV dielectric between coil and contacts. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Meets 5kV surge voltage. 5 89.6 56 3.75 0.50 • Immersion cleanable, sealed version available. 6 75.0 80 4.50 0.60 9 50.0 180 6.75 0.90 12 37.5 320 9.00 1.20 24 20.9 1,280 18.00 2.40 Contact Data @ 20°C 48 13.7 3,500 36.00 4.80 Arrangements: 1 Form A (SPST-NO), 1 Form C (SPDT). Material: Ag Alloy. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Contact Ratings Operate Time: 10 ms max. Release Time: 5 ms max. Ratings: 10A @ 120VAC resistive, 10A @ 28VDC resistive, 1/4 HP @ 120VAC. 3A @ 120VAC inductive (cosş= 0.4), 3A @ 28VDC inductive (L/R= 7msec). Environmental Data Max. Switched Voltage: AC: 240V. Temperature Range: DC: 110V. Operating: -30°C to +60°C Max. Switched Current: 10A. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Max. Switched Power: 1,200VA, 300W. Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Operational: 100m/s (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Dielectric Strength Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 5,000V (1.2/50μs). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Coil Data OUDH-SS: Vented (Flux-tight), plastic cover. OUDH-SH: Sealed, plastic case. Voltage: 5 to 48VDC. Weight: 0.35 oz (10g) approximately. Nominal Power: 450mW except 48VDC coil (660mW) Coil Temperature Rise: 60°C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 432 Refer to inside back cover. specified. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OUDH -SH -1 12 D M ,000 1. Basic Series: OUDH = Miniature, sealed PC board relay. 2. Enclosure: SS = Vented (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) .602± .012 (15.3 ± .3) .138 ± .012 (3.5 ± .3) .1 .1 .020 .018 .012 (2.54) (2.54) (.5) (.3) (.45) .067 .2 (1.70) (5.08) .500 PC Board Layout (Bottom View) (12.70) .085 ± .008 .858 ± .012 (2.15 ± .2) .085 ± .008 (21.8 ± .3) (2.15 ± .2) .300 ± .012 .300 ± .012 (7.62 ± .3) (7.62 ± .3) .673 ± .012 (17.10 ± .3) .200 ± .012 .200 ± .012 (5.08 ± .3) (5.08 ± .3) .500 .2 (12.70) (5.08) Reference Data Coil Temperature Rise Operate Time Life Expectancy 12 100 60 28VDC Resistive 10 50 40 8 Operate Time 120VAC Resistive 30 6 10 20 4 2 10 Release Time 1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0 2 4 6 8 10 12 Coil Power (W) Coil Power (W) Contact Current (A) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 433 specified. Refer to inside back cover. Temp. Rise (°C) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 P&B T7N series 10 Amp Miniature PC Board Relay File E22575 File LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Insulation Resistance 8 • Low cost, reduced height, 10A relay. Between Mutually Insulated Elements: 10 ohms, min. @ 500VDC. • 1 Form A and 1 Form C contact arrangement. • Plastic materials employ UL 94V-0 flammability. • UL class F (155°C) coil standard. • Immersion cleanable, sealed package. • Applications include appliance, HVAC, security system, garage opener Coil Data light, emergency lighting. Voltage: 3 through 48VDC. • European "white goods" version available by special order. Nom. Power: 360mW. Coil Temp. Rise: See Figure 1. Max. Coil Power: 150% of nominal. Duty Cycle: Continuous. Contact Data @ 20°C Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver-cadmium oxide. Coil Data @ 20°C Max. Switching Rate: Mechanical: 300 operations/min. Rated Coil Coil Must Operate Must Release Electrical: 30 operations/min. Voltage Resistance Voltage Voltage Expected Mechanical Life: 10 million operations min. (no load). (VDC) ±10% (Ohms) (VDC) (VDC) Expected Electrical Life: 100,000 operations min. (at rated coil voltage). 3 25 2.1 .15 Minimum Contact Load: 10mA @ 5VDC. Initial Contact Resistance: 100 milliohms, max. @ 1A, 6VDC. 5 70 3.5 .25 6 100 4.2 .30 9 225 6.3 .45 12 400 8.4 .60 UL Contact Ratings @ 20°C with relay properly vented. Remove 18 900 12.6 .90 24 1,600 16.8 1.20 vent nib after soldering and cleaning. 36 3,600 25.2 1.80 Contact UL/CSA Ratings Type Operations 48 6,400 33.6 2.40 Arrang. 1 & 5 1/4HP @ 240VAC Motor 1,000* 1/3HP @ 120VAC Motor 6,000 1/3HP NO @ 120VAC Motor 6,000 1/3HP NO @ 240VAC Motor 6,000** 5A/5A @ 240VAC Resistive 6,000* Operate Data @ 20°C 10A NO @ 240VAC Resistive 6,000 Operate Time: 10 ms, max. (excluding bounce). 10A/5A @ 240VAC Gen. Purpose 6,000 Release Time: 5 ms, max. (excluding bounce). 8A NC @ 240VAC Resistive 6,000 1/6HP NC @ 240VAC Motor 6,000** 1/4HP NO @ 240VAC Motor 6,000** 1/10HP NO @ 120VAC Motor 6,000** 10A/5A @ 240VAC Resistive 6,000** TV-3 NO @ 120VAC Tungsten 25,000 Environmental Data 6A NC @ 240VAC Resistive 25,000** Temperature Range: 10A/5A @ 240VAC Resistive 30,000 Storage: -40°C to +130°C. 10A/5A @ 28VDC Resistive 30,000 Operating: -40°C to +85°C. (no water condensation and no water drop). 10A NO @ 240VAC Resistive 30,000** Vibration: 10-55 Hz., .063” (1.6mm) double amplitude; 10A NO @ 240VAC Gen. Purpose 30,000** 10-55 Hz., .079” (2.0mm) double amplitude. 34.8LRA/6FLA NO @ 120VAC Motor 100,000 Shock: Mechanical: 100g minimum. 10A/5A @ 120VAC Resistive 100,000 Operational: 10g minimum. 5A/5A @ 240VAC Resistive 100,000 Operating Humidity: 45 to 85% RH. 10A/5A @ 28VDC Resistive 100,000 *Denotes test at 70°C ambient temperature. **Denotes test at 85°C ambient temperature. Mechanical Data Termination: Printed circuit terminals. Enclosure (UL 94V-O Flammability Ratings): Initial Dielectric Strength T7NS: Immersion cleanable case with knock-off nib for ventilation. T7NV: Vented, flux-tight plastic cover. Between Open Contacts: 750VAC, 50/60 Hz. (1 min.) Weight: 0.38 oz. (11g) approximately. Between Coil and Contacts: 2,000VAC, 50/60 Hz. (1 min.) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 434 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Figure 1 – Coil Temperature Rise Operate Time Life Expectancy 100 100 12 10A 90 28VDC Resistive 10 80 Operate Time 5A 70 8 0A 60 6 10 50 240VAC Resistive 40 4 30 20 2 Release Time 10 1 0 0.2 0 4 6 8 10 12 0.1 0.3 0.4 0.5 0.6 0.7 2 0 0.2 0.4 0.6 0.8 1.0 1.2 Contact Current (A) Coil Power (W) Applied Continuous Coil Volt. (% Of Rated Volt.) Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Ordering Information Typical Part Number B T7N S 5 D 1 -24 1. Basic Series: T7N = Miniature, printed circuit board relay. 2. Enclosure: V = Vented, flux-tight* S = Immersion cleanable case with knock-off nib. 3. Contact Arrangement: 1 = 1 Form A(SPST-NO) 5 = 1 Form C (SPDT) 4. Coil Input: D = DC Coil. 5. Contact Material: 1 = Silver-cadmium oxide contacts. 6. Coil Voltage: 03 = 3VDC 06 = 6VDC 12 = 12VDC 24 = 24VDC 48 = 48VDC 05 = 5VDC 09 = 9VDC 18 = 18VDC 36 = 36VDC * Not suitable for immersion cleaning. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T7NS1D1-12 T7NS5D1-05 T7NS5D1-24 T7NS1D1-24 T7NS5D1-12 T7NS5D1-48 Outline Dimensions Suggested PC Board Layout (Bottom View) Tolerance (unless otherwise noted): 3 decimal: ±.010 (±.254); 2 decimal: ±.015 (±.381). .052 DIA. TYP. .480 .079 (1.3) (12.2) (2.0) .015 MAX. .63 MAX. 4 PLACES (.40) (16.0) .023 x .043 MAX. (.58 x 1.04) .472 (12.0) .87 MAX. .081 (22.0) .236 (2.06) (6.0) .140 +.040, –.030 (3.5 +1.0, – 0.8) .040 DIA. (1.02) Socket 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and .65 MAX. Canada. Designed to fit same suggested board layout as relay. (16.4) Wiring Diagram (Bottom View) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 435 specified. Refer to inside back cover. Coil Temp. Rise Above Ambient (°C) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG PCE series 10 Amp Miniature Power PC Board Relay Appliances, HVAC, Office Machines UL File No. E82292 CSA File No. LR48471 VDE File No. 6175 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data • Small, low profile package, 10 Amp switching capacity. Voltage: 6 to 48VDC. • 1 Form A and 1 Form C contact arrangements. Nominal Power: 360 mW • UL Class F (155°C) insulation system standard Coil Temperature Rise: 35°C max., at rated coil voltage. • Immersion cleanable, sealed version available. Max. Coil Power: 130% of nominal. • Applications include appliance, HVAC, security system, garage opener Duty Cycle: Continuous. control, emergency lighting. Coil Data @ 20°C PCE Contact Data @ 20°C Rated Coil Nominal Coil Must Operate Must Release Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Voltage Current Resistance Voltage Voltage Material: Ag Alloy, AgSnO. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). 6 60 100 4.50 0.30 Expected Mechanical Life: 10 million operations (no load). 9 40 225 6.75 0.45 Expected Electrical Life: 100,000 operations (rated load). 12 30 400 9.00 0.60 Minimum Load: 100mA @ 5VDC. 24 15 1,600 18.00 1.20 Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. 48 7 6,400 36.00 2.40 Contact Ratings Ratings: 10A @ 250VAC resistive, Operate Data 10A @ 120VAC resistive, Must Operate Voltage: 75% of nominal voltage or less. 10A @ 28VDC resistive. Must Release Voltage: 5% of nominal voltage or more. Operate Time: 10 ms max. 3A @ 250VAC inductive (cosş= 0.4), Release Time: 5 ms max. 3A @ 120VAC inductive (cosş= 0.4), 3A @ 28VDC inductive (L/R=7msec). Environmental Data Temperature Range: Max. Switched Voltage: AC: 250V. Operating: -30°C to +70°C DC: 28V. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Max. Switched Current: 10A. Operational: 10 to 55 Hz., 1.5mm double amplitude. Max. Switched Power: 2,500VA, 280W. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Operational: 100m/s (10G approximately). Initial Dielectric Strength Operating Humidity: 20 to 85% RH. (Non-condensing). Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 2,000VAC 50/60 Hz. (1 minute). Mechanical Data Surge Voltage Between Coil and Contacts: 4,000V (1.2 / 50μs). Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Initial Insulation Resistance PCE: Sealed plastic case with knock-off nib for ventilation Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Weight: 0.32 oz (11g) approximately. Reference Data Coil Temperature Rise Operate Time Life Expectancy 180 100 12 160 28VDC Resistive Maximum 10 Allowable 140 Operating Operate Time Coil Voltage Votage Range 8 120 100 10 6 240VAC Resistive 80 Cool Coil 60 4 Hot Coil 10A Applied 40 Pick-Up Voltage 2 20 Release Time 1 0 0 6 8 10 -30 -10 10 30 50 70 90 110 130 150 0.1 0.2 0.3 0.4 0.5 0.6 0.7 2 4 12 Ambient T emp. (°C) Coil Power (W) Contact Current (A) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 436 specified. Refer to inside back cover. % of Supplying Voltage to Coil Time (msec) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B PCE -1 24 D 1 M ,000 1. Basic Series: PCE = Miniature Power PC board relay. 2. Termination: 1 = 1 pole 3. Coil Voltage: 06 = 6VDC 12 = 12VDC 48 = 48VDC 09 = 9VDC 24 = 24VDC 4. Coil Input: D = Standard 5. Contact Material: 1 = AgCdO 2 = AgSnO 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Enclosure: Blank = Flux-tight plastic case. H = Sealed plastic case with knock-off nib for ventilation 8. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PCE-112D1MH,000 PCE-112D1H,000 PCE-124D1H,000 PCE-124D1MH,000 Outline Dimensions Wiring Diagram (Bottom View) .646 ± .02 (16.4 ± .5) .016 (.4) .138 ± .012 (3.5 ± .3) .012 .039 .039 .039 .016 (.3) (1.0) (.4) (1.0) (1.0) .016 .866 ± .02 (.4) (22.0 ± .5) PC Board Layout (Bottom View) .63 ± .02 .47 ± .008 (16.0 ± .5) (12.0 ± .2) .472 ± .004 (12.0 ± .1) 5 – .05 DIA .079 ± .008 .48 ± .004 (1.3) .079 ± .008 .48 ± .008 .216 ± .008 (2.0 ± .2) (12.2 ± .1) (2.0 ± .2) (12.2 ± .2) (5.5 ± .2) Socket 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and Canada. Designed to fit same suggested board layout as relay. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 437 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG ORWH series 10 Amp Miniature Power PC Board Relay File No. E82292 .. TUV Rheinland Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features • Compact relay with 1 Form A and 1 Form C contact arrangements. ORWH • 10 Amp switching capacity. Rated Coil Nominal Coil Must Operate Must Release • Flux-tight or sealed version available. Voltage Current Resistance Voltage Voltage • Applications include appliance, HVAC, security system, garage opener (VDC) (mA) (ohms) ± 10% (VDC) (VDC) control, emergency lighting. 3 120.0 25 2.1 0.3 5 71.4 70 3.5 0.5 6 60.0 100 4.2 0.6 Contact Data @ 20°C 9 44.4 225 6.3 0.9 Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). 12 40.0 400 8.4 1.2 Material: AgCdO. 24 15.0 1,600 16.8 2.4 48 7.5 6,400 33.6 4.8 Max. Switching Rate: 300 ops./min. (no load). 20 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations at 10A @ 250VAC res. (NO). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data Must Operate Voltage: 70% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 10 ms max. Contact Ratings Release Time: 5 ms max. Ratings: 10A/6A @ 250VAC resistive (NO/NC), 10A/6A @ 28VDC resistive (NO/NC), 15A @ 120VAC resistive (NO), 15A @ 28VDC resistive (NO), 10A @ 277VAC resistive (NO). Max. Switched Voltage: AC: 277V. DC: 30V. Max. Switched Current: 15A. Environmental Data Max. Switched Power: 2,770VA, 360W. Temperature Range: Operating: -30°C to +70°C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Initial Dielectric Strength 2 Shock, Mechanical: 1,000m/s (100G approximately). Between Open Contacts: 750VAC 50/60 Hz. (1 minute). 2 Operational: 100m/s (10G approximately). Between Coil and Contacts: 1,500VAC 50/60 Hz. (1 minute). Operating Humidity: 20 to 85% RH. (Non-condensing). Surge Voltage Between Coil and Contacts: 3,000V (1.2 / 50μs). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Mechanical Data Termination: Printed circuit terminals. Coil Data @ 20°C Enclosure (94V-0 Flammability Ratings): Voltage: 3 to 48VDC. ORWH-SS: Vented (flux-tight) cover. Nominal Power: 360 mW ORWH-SH: Sealed plastic case. Note: Vent nib should be removed Max. Coil Power: 130% of nominal. after soldering and cleaning. Duty Cycle: Continuous. Weight: 0.33 oz (9.5g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 438 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B ORWH -SS -1 12 D M ,N000 1. Basic Series: ORWH = Miniature Power PC board relay. 2. Enclosure: SS = Vented (flux-tight)* plastic case. SH = Sealed plastic case 3. Number of Poles: 1 = 1 pole 4. Coil Voltage: 03 = 3VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 05 = 5VDC 09 = 9VDC 24 = 24VDC 5. Coil Input: D = Standard 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Option: ,N000= Standard model. Other Suffix = Custom model. * Not suitable for immersion cleaning Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. ORWH-SS-148D,N000 ORWH-SS-112DM,N000 ORWH-SS-106D,N000 ORWH-SH-112DM,N000 ORWH-SH-109D,N000 ORWH-SS-109D,N000 ORWH-SH-112D,N000 ORWH-SS-124DM,N000 ORWH-SH-124DM,N000 ORWH-SS-148DM,N000 ORWH-SS-112D,N000 ORWH-SH-105D,N000 ORWH-SH-124D,N000 ORWH-SS-124D,N000 ORWH-SH-148D,N000 ORWH-SS-105D,N000 ORWH-SH-106D,N000 Wiring Diagram (Bottom View) Outline Dimensions .748 ± .012 .61 ± .012 (15.5 ± .3) (19.0 ± .3) .622 ± .02 (15.8 ± .5) .157 ± .008 (4.0 ± .2) PC Board Layout (Bottom View) TERMINAL DIMENSIONS: COIL: 0.024 (0.6) DIA. LOAD: 0.12 x 0.35 (0.3 x 0.9) .236 ± .004 (6.0 ± .1) .236 ± .004 (6.0 ± .1) Note: Only necessary terminals are present on 1 Form A models. 5 – .05 DIA .079 ± .004 .48 ± .004 (1.3) (2.0 ± .1) (12.2 ± .1) Socket 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and Canada. Designed to fit same suggested board layout as relay. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 439 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B T7C series 5 - 12 Amp Miniature Power PC Board Relay File E22575 File LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Dielectric Strength • Up to 12 amp switching capacity. Between Open Contacts: 750VAC 50/60 Hz. (1 minute). • UL Class F (155°C) coil insulation system. Between Coil and Contacts: 1,500VAC 50/60 Hz. (1 minute). • 1 Form A and 1 Form C contact arrangements. • Ideal for domestic appliances, HVAC and security. • Resists high temperature and various chemical solutions. Initial Insulation Resistance 8 Contact Data @ 20°C Between Mutually Insulated Elements: 10 ohms min. @ 500VDC. Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver-cadmium oxide or silver. Coil Data @ 20°C Max. Switching Rate: 300 ops./min. (no load). Voltage: 3 to 48VDC. 30 ops./min. (rated load). Nominal Power: 360 milliwatts. Expected Mechanical Life: 10 million operations. 510 milliwatts for 48VDC coil. Expected Electrical Life: 100,000 operations. Coil Temperature Rise: 35C° max, at rated coil voltage. Minimum Load: 10mA @ 5VDC Max. Coil Voltage: 130% of nominal. Initial Contact Resistance: Ag: 100 milliohms max. @ 100mA, 6VDC. Duty Cycle: Continuous. AgCdO: 100 milliohms max. @ 1A, 6VDC. Coil Data @ 20°C Silver Cadmium Oxide Contact Ratings @ 20°C with relay Rated Coil Coil Resistance Must Operate Must Release properly vented. Remove vent nib after soldering and cleaning. Voltage (Ohms) +10% Voltage Voltage Contact UL/CSA Ratings Type Operations (VDC) (VDC) (VDC) Arrang. 3 25 2.25 0.15 1 & 5 1/3HP NO @ 120VAC Motor 6,000** 5 70 3.50 0.25 TV-2 NO @ 120VAC Tungsten 25,000** 6 100 4.50 0.30 9 225 6.75 0.45 5.4LRA/0.9FLA NO @ 240VAC Motor 30,000*** 12 400 9.00 0.60 10LRA/1.5FLA @ 120VAC Motor 30,000*** 24 1,600 18.00 1.20 12A NO @ 120VAC Resistive/GP 100,000* 48 4,500 36.00 2.40 34.8LRA/6FLA NO @ 120VAC Motor 100,000** 10A/5A @ 240VAC Resistive/GP 100,000** Operate Data @ 20°C 10A/5A @ 28VDC Resistive 100,000** 240VA, 240VAC Pilot Duty 100,000** Operate Time: 10 ms (excluding bounce). 4LRA/4FLA NO @ 120VAC Motor 100,000**** Release Time: 5 ms (excluding bounce). 4LRA/2FLA NC @ 120VAC Motor 100,000**** 6LRA/6FLA NO @ 120VAC Motor 100,000*** Environmental Data 7A @ 277VAC Resistive/GP 100,000 Temperature Range: 10LRA/2.5FLA NO @ 277VAC Motor 100,000 Storage: -40°C to +130°C. Operating: -40°C to +85°C. Consult factory for other ratings. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude *Denotes test at 60°C ambient temperature. Operational: 10 to 55 Hz., 1.5mm double amplitude. **Denotes test at 70°C ambient temperature. ***Denotes test at 85°C ambient temperature. Shock, Mechanical: 100g min. ****Denotes test at 105°C ambient temperature. Operational: 10g min. Operating Humidity: 45 to 85% RH. Silver Contact Ratings @ 20°C with relay properly vented. Mechanical Data Remove vent nib after soldering and cleaning. Termination: Printed circuit terminals. Contact Ratings Type Operations Enclosure (94V-0 Flammability Ratings): Arrang. T7CS: Immersion cleanable with knock-off nib. 1 & 5 5A @ 120VAC Resistive 6,000 T7CV: Vented, flux-tight, plastic cover with knock-off nib. 5A @ 28VDC Resistive 6,000 Weight: 0.42 oz. (12g). Figure 1 - Coil Temperature Rise Operate Time Life Expectancy 180 12 100 160 Maximum 10 24VDC Resistive 140 Operating Allowable Voltage Range Coil Voltage 8 120 Operate Time 100 6 10 240VAC Resistive 80 Cool Coil 60 4 Hot Coil 10A Applied 40 Pick-Up Voltage 2 Release Time 20 1 0 0.2 0.4 0 4 6 8 10 12 0.6 0.8 1.0 1.2 1.4 2 30 50 70 90 110 150 -30 -10 10 130 Coil Power (W) Contact Current (A) Ambient T emp. (°C) Note: Graphical data should not be used as a substitute for specific application verification. To be used for estimates only. Graphical data applicable to model with silver cadmium oxide contacts. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 440 specified. Refer to inside back cover. % of Supplying Voltage to Coil Time (msec) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B T7C V 5 D -24 1. Basic Series: T7C = Miniature power relay. 2. Enclosure: V = Vented (Flux-tight)* S = Immersion cleanable case with knock-off nib. 3. Contact Arrangement: 1 = 1 Form A (SPST-NO) 5 = 1 Form C (SPDT) 4. Coil Input: D = DC Voltage 5. Contact Material: Leave Blank = Silver Cadmium Oxide (12A Max. Rating) 2 = Silver (5A Max. Rating) 6. Coil Voltage: 03 = 3VDC 05 = 5VDC 06 = 6VDC 09 = 9VDC 12 = 12VDC 18 = 18VDC 24 = 24VDC 48 = 48VDC * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T7CV5D-05 T7CV5D-12 T7CS5D-05 T7CS5D-12 T7CV5D-06 T7CV5D-24 T7CS5D-06 T7CS5D-24 Outline Dimensions .795 ± .02 .65 (20.2 ± .5) (16.50) Movable Contact Terminal: .012 x.039 (0.3 x 1.0) .795 ± .02 Stationary (20.2 ± .5) Contact Terminals: .012 x .039 (0.3 x 1.0) Coil Terminals: .022 x .022 (.56 x .56) .197 MAX. (5.0) Suggested PC Board Layouts (Bottom Views) Wiring Diagrams (Bottom Views) 1 Form A 1 Form A 2-.043Ş 2-.051Ş (2-1.1) (1.3) .236 ± .008 (6 ± .2) .236 ± .008 .079 ± .008 .48 ± .008 (6 ± .2) (2 ± .2) (12.2 ± .2) 1 Form C 1 Form C 2-.043Ş 3-.051Ş (2-1.1) (1.3) .236 ± .008 (6 ± .2) .236 ± .008 .079 ± .008 .48 ± .008 (6 ± .2) (2 ± .2) (12.2 ± .2) Hold-Down Spring Socket 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and 20C430 spring is designed to secure T7C relay in 27E1064 socket. Canada. Designed to fit same suggested board layout as relay. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 441 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG SRUDH series 12 Amp Miniature Power PC Board Relay Appliances, HVAC, Office Machines UL File No. E82292 CSA File No. LR48471 TUV File No. R60271 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data • Small package, 12 Amp switching capcity. Voltage: 6 to 48VDC. • 1 Form A and 1 Form C contact arrangements. Nominal Power: 360 mW except 48VDC coil (510mW) • Immersion cleanable, sealed version available. Coil Temperature Rise: 35°C max., at rated coil voltage. • Applications include appliance, HVAC, security system, garage opener Max. Coil Power: 130% of nominal. control, emergency lighting. Duty Cycle: Continuous. Coil Data @ 20°C Contact Data @ 20°C SRUDH Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Rated Coil Nominal Coil Must Operate Must Release Material: Ag Alloy. Voltage Current Resistance Voltage Voltage Max. Switching Rate: 300 ops./min. (no load). (VDC) (mA) (ohms) ± 10% (VDC) (VDC) 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). 6 60 100 4.50 0.60 Expected Electrical Life: 100,000 operations (rated load). 9 40 225 6.75 0.90 Minimum Load: 100mA @ 5VDC. 12 30 400 9.00 1.20 Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. 24 15 1,600 18.00 2.40 48 10 4,500 36.00 4.80 Contact Ratings Ratings: 12A @ 120VAC resistive, Operate Data 10A @ 240VAC resistive, Must Operate Voltage: 75% of nominal voltage or less. 10A @ 28VDC resistive. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 15 ms max. 4A @ 120VAC inductive (cosş= 0.4), Release Time: 5 ms max. 4A @ 28VDC inductive (L/R=7msec) Environmental Data Max. Switched Voltage: AC: 240V. DC: 28V. Temperature Range: Max. Switched Current: 12A. Operating: -30°C to +60°C Max. Switched Power: 2,400VA, 300W. Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Operational: 100m/s (10G approximately). Initial Dielectric Strength Operating Humidity: 20 to 85% RH. (Non-condensing). Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 1,500VAC 50/60 Hz. (1 minute). Mechanical Data Surge Voltage Between Coil and Contacts: 3,000V (1.2 / 50μs). Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): SRUDH-SS: Vented (Flux-tight) plastic cover Initial Insulation Resistance SRUDH-SH: Sealed plastic case Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Weight: 0.42 oz (12g) approximately. Reference Data Coil Temperature Rise Operate Time Life Expectancy 180 12 100 160 Maximum 10 24VDC Resistive Allowable 140 Operating Coil Voltage Votage Range 8 120 Operate Time 100 6 10 240VAC Resistive 80 Cool Coil 60 4 Hot Coil 10A Applied 40 Pick-Up Voltage 2 Release Time 20 1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 2 4 6 8 10 12 -30 -10 10 30 50 70 90 110 130 150 Coil Power (W) Contact Current (A) Ambient T emp. (°C) Note: Rise data is based on the max. allowable temp. for E type insulation coil (115°C). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 442 specified. Refer to inside back cover. % of Supplying Voltage to Coil Time (msec) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B SRUDH -SS -1 12 D M 1 ,000 1. Basic Series: SRUDH = Miniature Power PC board relay. 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 06 = 6VDC 12 = 12VDC 48 = 48VDC 09 = 9VDC 24 = 24VDC 5. Coil Input: D = Standard 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Contact Material: 1 = AgCdO 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SRUDH-SH-112DM1,000 SRUDH-SH-112D1,000 SRUDH-SH-124D1,000 SRUDH-SH-124DM1,000 Wiring Diagram (Bottom View) Outline Dimensions .795 ± .02 (20.2 ± .5) .177 ± .008 (4.5 ± .2) .012 .039 .020 .020 (.3) .018 (1.0) (.5) (.5) (.45) .039 .079 ± .008 (1.0) (2.0 ± .2) PC Board Layout (Bottom View) .236 ± .008 .236 ± .004 (6.0 ± .2) (6.0 ± .1) .65 ± .02 (16.5 ± .5) .236 ± .004 .236 ± .008 (6.0 ± .1) (6.0 ± .2) 5 – .05 DIA .079 ± .008 .48 ± .004 (1.3) .079 ± .008 (2.0 ± .2) (12.2 ± .1) .48 ± .008 .157 ± .008 (2.0 ± .2) (12.2 ± .2) (4.0 ± .2) .795 ± .02 (20.2 ± .5) Socket Hold-Down Spring 20C430 spring is designed to secure SRUDH relay in 27E1064 socket. 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and Canada. Designed to fit same suggested board layout as relay. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 443 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG SRUUH series 15 Amp Miniature Power PC Board Relay UL File No. E82292 TUV File No. R60271 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features • 15 Amp switching capacity. SRUUH • 1 Form A and 1 Form C contact arrangements. Rated Coil Nominal Coil Must Operate Must Release • Immersion cleanable, sealed version available. Voltage Current Resistance Voltage Voltage • Applications include appliance, HVAC, security system, garage opener (VDC) (mA) (ohms) ± 10% (VDC) (VDC) control, emergency lighting. 3 120 25 2.25 0.30 6 60 100 4.50 0.60 9 40 225 6.75 0.90 12 30 400 9.00 1.20 24 15 1,600 18.00 2.40 Contact Data @ 20°C 48 10 4,500 36.00 4.80 Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Silver cadmium oxide. Max. Switching Rate: 300 ops./min. (no load). 20 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load, relay vented). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time: 15 ms max. Release Time: 5 ms max. Contact Ratings Ratings: 15A @ 120VAC resistive, 10A @ 240VAC resistive, 10A @ 28VDC resistive. Max. Switched Voltage: AC: 240V. DC: 28V. Max. Switched Current: 15A. Environmental Data Max. Switched Power: 2,400VA, 300W. Temperature Range: Operating: -30°C to +60°C Note: Sealed relays should be vented after soldering and cleaning in order Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude to achieve listed ratings. Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Operational: 100m/s (10G approximately). Initial Dielectric Strength Operating Humidity: 20 to 85% RH. (Non-condensing). Between Open Contacts: 750VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 1,500VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 3,000V (1.2 / 50μs). Initial Insulation Resistance Between Mutually Insulated Elements: 100M ohms min. @ 500VDC. Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Coil Data SRUUH-SS: Vented (Flux-tight) plastic cover Voltage: 3 to 48VDC. SRUUH-SH: Sealed plastic case Nominal Power: 360 mW except 48VDC coil (510mW). Weight: 0.42 oz (12g) approximately. Coil Temperature Rise: 60°C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 444 Refer to inside back cover. specified. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B SRUUH -SS -1 12 D 1 M ,000 1. Basic Series: SRUUH = Miniature Power PC board relay. 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 03 = 3VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard 6. Contact Material: 1 = Silver Cadmium Oxide 6. Contact Arrangement: Leave Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Option: ,000= Standard model. Other Suffix = Custom model. * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SRUUH-SH112D1M,000 SRUUH-SH112D1,000 SRUUH-SH124D1M,000 SRUUH-SH124D1,000 Wiring Diagram (Bottom View) Outline Dimensions .795 ± .02 (20.2 ± .5) .177 ± .008 (4.5 ± .2) .012 .039 PC Board Layout (Bottom View) .020 .020 (.3) .022 (1.0) (.5) (.5) (.56) .039 .079 ± .008 (1.0) (2.0 ± .2) .236 ± .004 (6.0 ± .1) .236 ± .004 .236 ± .008 (6.0 ± .1) (6.0 ± .2) .65 ± .02 5 – .05 DIA (16.5 ± .5) .079 ± .008 .48 ± .004 (1.3) .236 ± .008 (2.0 ± .2) (12.2 ± .1) (6.0 ± .2) .079 ± .008 .157 ± .008 .48 ± .008 (2.0 ± .2) (12.2 ± .2) (4.0 ± .2) Note: Only necessary terminals are present on 1 Form A (SPST-NO) models. .795 ± .02 (20.2 ± .5) Socket Hold-Down Spring 27E1064 socket is rated 10A @ 300VAC. UL Recognized for US and 20C430 spring is designed to secure SRUUH relay in 27E1064 socket. Canada. Designed to fit same suggested board layout as relay. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 445 specified. Refer to inside back cover. 300 260 220 180 0 A 8 A 12A 140 16A 100 B A 60 0 20 40 60 80 100 Catalog 1308242 Issued 3-03 P&B RT series (DC Coil) 16 Amp PC Board Miniature Relay File E22575 File LR15734 NR 6106 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 25°C Features • SPST through DPDT contact arrangements. Voltage: 5 to 110VDC. • Immersion cleanable and flux tight versions available. Nominal Power @ 25°C: 400mW. • VDE 10mm spacing, 5kV dielectric, coil to contacts. Duty Cycle: Continuous. • UL Class F (155°C) coil insulation system. Initial Insulation Resistance: 10,000 megohms, min., at 25°C, 500VDC • Conforms to UL 508, 1873, 353 and 1950. and 50% rel. humidity. • Low profile; 15.7mm height. Coil Construction: UL Class F (155°C). • Sensitive coil; 400mW. • Withstand surge voltage of 10,000V. Coil Data @ 25°C • Potter & Brumfield or Schrack brand. DC Must Nominal Nominal Resistance Operate Coil Contact Data Voltage in Ohms Voltage Current Arrangements: 1 Form A (SPST-NO) Wiring Diagram Code 1, 2,3. VDC ±10% VDC (mA) – 50/60Hz. 2 Form A (DPST-NO) Wiring Diagram Code 5. 005 62 3.5 80 1 Form C (SPDT) Wiring Diagram Code 1, 2, 3. 006 90 4.2 66.7 2 Form C (DPDT) Wiring Diagram Code 5. 009 202 6.3 44.4 Material: Silver-nickel 90/10. 012 360 8.4 33.3 Minimum Load: 12V/100mA. 018 810 12.6 22.2 Expected Mechanical Life: 10 million operations. 024 1,440 16.8 16.7 Initial Contact Resistance: 100 milliohms max @ 1A 12VDC. 048 5,760 33.6 8.3 060 9,000 42.0 8.0 Designed to meet UL/CSA/VDE ratings with relay proper- 110 30,250 77.0 4.3 ly vented. Remove vent nib after soldering and cleaning. Max. Ambient Temp. vs. Coil Voltage UL/CSA/VDE Ratings @ 25°C Code NO/NC Load Type Operations 1 10A/10A @ 277VAC Resistive/GP 100K 10A/10A @ 30VDC Resistive 100K 12A/12A @ 250VAC Resistive/GP 30K 12A/12A @ 30VDC Resistive 30K 3/4 HP @ 480VAC* Motor 6K 1/2 HP @ 240VAC* Motor 6K 1/3 HP @ 120VAC* Motor 6K 48 LRA/10 FLA @ 240VAC* Motor 30K TV-3 @ 120VAC* Tungsten 25K A300, 720VA @ 240VAC* Pilot Duty 30K 3 16A/16A @ 250VAC Resistive/GP 50K 20A/20A @ 277VAC Resistive/GP 30K 20A/20A @ 24VDC Resistive 30K 16A/16A @ 30VDC Resistive 30K Max. Allowable Ambient Temp. (°C) 1 HP @ 480VAC* Motor 6K A: Coil temperature = Ambient temperature. 1 HP @ 240VAC* Motor 6K B: 110% of nominal coil voltage at rated contact load. 1/2 HP @ 120VAC* Motor 6K 60 LRA/10 FLA @ 250VAC* Motor 30K Operate Data @ 25°C TV-5 @ 120VAC* Tungsten 25K Must Operate Voltage(DC): 70% of nominal. A300, 720VA @ 240VAC* Pilot Duty 30K Must Release Voltage(DC): 10% of nominal. B300, 360VA @ 240VAC** Pilot Duty 30K Operate Time (Excluding Bounce): 5 8A/8A @ 277VAC Resistive/GP 100K 7 ms, typ., 15ms max. at nom. voltage. 8A/8A @ 30VDC Resistive 100K Release Time (Excluding Bounce): 10A/10A @ 250VAC Resistive/GP 30K 3 ms, typ., 6ms max. at nom. voltage. 10A/10A @ 30VDC Resistive 30K 1/2 HP @ 240VAC* Motor 6K 1/4 HP @ 120VAC* Motor 6K Environmental Data 34.8 LRA/6 FLA @ 120VAC* Motor 30K Temperature Range: 17.4 LRA/5 FLA @ 240VAC* Motor 30K Storage: -40°C to +105°C. B300, 360VA @ 240VAC* Pilot Duty 30K Operating: -40°C to +85°C at rated current. TV-3 @120VAC* Tungsten 25K Vibration, Operational * Form A only N.O.:0.065”(1.65mm) max. excursions from 10 - 55 Hz: ** Form B only N.C.:0.032”(0.82mm) max. excursions from 10 - 55 Hz: with no contact opening >10µs. Initial Dielectric Strength Mechanical Data Between Open Contacts: >1,000VAC (1 minute). Termination: Printed circuit terminals. Between Poles (code 5): >2,500VAC (1 minute). Enclosures: RT 1, 2, 3, 4: Flux-tight, top vented, plastic case. Between Coil and Contacts: >5,000VAC (1 minute). RT B, C, D, E: Immersion cleanable, plastic case. Surge Voltage (DC): >10,000VAC x (1.2 x 50 µsec). Weight: 0.35 oz. (10g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 446 specified. Refer to inside back cover. Applied Coil Voltage (% of rated nom.) Catalog 1308242 Issued 3-03 P&B Ordering Information (DC Coil Models) Typical Part Number B RT B 3 4 012 F 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 1 = 1 pole 12A, Pinning 3.5mm, flux-tight (Code 1). B = 1 pole 12A, Pinning 3.5mm, sealed (Code 1). 2 = 1 pole 12A, Pinning 5mm, flux-tight (Code 2). C = 1 pole 12A, Pinning 5mm, sealed (Code 2). 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). D = 1 pole 16A, Pinning 5mm, sealed (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). E = 2 pole 8A, Pinning 5mm, sealed (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPDT) (Requires wiring diagram codes 1, 2 or 3.) 2 = 2 Form C (DPDT) (Requires wiring diagram code 5.) 3 = 1 Form A (SPST-NO) (Requires wiring diagram codes 1, 2 or 3.) 4 = 2 Form A (DPST-NO) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10 (standard stock). 5. Coil Voltage: 005 = 5VDC 009 = 9VDC 018 = 18VDC 048 = 48VDC 110 = 110VDC 006 = 6VDC 012 = 12VDC 024 = 24VDC 060 = 60VDC 5. Coil Insulation Classification, Brand and Case Color F = UL Class F, Potter & Brumfield Brand, Black Case Leave Blank = UL Class F, Schrack Brand, Orange Case Our authorized distributors are more likely to stock the following items for immediate delivery. RT114012F RTB14012F RTB34024F RTD14005F RTD34012F RTE24005F RTE44012F RT114024F RTD14012F RT424012F RTE24012F RTB14024F RT314012F RTE44024F RTB14005F RTB34012F RT314024F RTD14024F RT424024F RTE24024F Breaking Capacity Outline Dimensions 1 Pole .50 2 Pole .62 (12.7) (15.7) 50 50 6X .031 X .020 A (.80 X .52) 10 10 B 5 5 1.14 (29) 2 2 A B 1 1 0.5 0.5 2X .020 X .020 (.52 X .52) 0.1 .17 0.1 10 20 50 100 200 300 10 20 50 100 200 300 (4.3) DC Voltage DC Voltage A: 1 Contact. PC Board Layouts (Bottom View) A: 16A Version. B: 2 Contacts in series. B: 12A Version. 1 Pole 16A 1 Pole 12A 1 Pole 12A 2 Pole 8A 3.5mm 5mm 5mm .051 DIA. .051 DIA. .051 DIA. (1.30) (1.30) (1.30) Contact Life for Resistive AC Load (Typical) .276 .400 .400 7 (7.0) (10.16) (10.16) 10 A: 8A Model B: 12A Model .800 .800 .800 C: 16A Model (20.32) (20.32) (20.32) 6 10 051 DIA. .051 DIA. .051 DIA. B .300 .300 .300 (1.30) (1.30) (1.30) A C (7.62) (7.62) (7.62) 5 10 Code 1 Code 2 Code 3 & 5 Notes: 1. On single throw models, only necessary terminals are present. 2. With the recommended PCB hole sizes, a grid with a pattern from 0.0984 to 0.1 4 in (2.5 - 2.54 mm) can be used. 10 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 Breaking Capacity (kVA) Wiring Diagrams (Bottom View) 1 Pole 16A 2 Pole 8A 1 Pole 12A Note: Data from 250VAC @ 70°C. Code 5 Codes 1 & 2 Code 3 Note: On single throw models, only necessary terminals are present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 447 specified. Refer to inside back cover. Contact Current Operations Contact Current 300 260 220 180 0 A 8 A 12A 140 16A 100 B A 60 0 20 40 60 80 100 Catalog 1308242 Issued 3-03 SCHRACK RT series (AC Coil) 16 Amp Miniature Printed Circuit Board Relay File E214025 NR 6106 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20°C • SPST through DPDT contact arrangements. Voltage: 24, 115, 230VAC (consult factory for availability of other voltages). • Immersion cleanable and flux tight versions available. Nominal Power @ 25°C: .75VA. • Meets VDE 10mm spacing, 5kV dielectric, coil to contacts. Duty Cycle: Continuous. • Conforms to UL 508, 1873 and 353. Initial Insulation Resistance: 10,000 megohms, min., at 20°C, 500VDC • UL Class F (155°C) coil construction and 50% rel. humidity. • Schrack brand Coil Construction: UL Class F (155°C). Contact Data Coil Data Arrangements: 1 Form A (SPST-NO) Wiring Diagram Code 1, 2, 3. DC Must Nominal Nominal 2 Form A (DPST-NO) Wiring Diagram Code 5. Nominal Resistance Operate Drop-out Coil Coil 1 Form C (SPDT) Wiring Diagram Code 1, 2, 3. Voltage in Ohms Voltage Voltage Current Current 2 Form C (DPDT) Wiring Diagram Code 5. VAC ±10% VAC VAC (mA)–50Hz. (mA)–60Hz. Material: Silver-nickel 90/10. 24 350 18.0 3.6 31.6 24.3 Minimum Load: 12V/100mA. 115 8,100 86.3 17.3 6.6 5.1 Expected Mechanical Life: 10 million operations. 230 32,500 172.5 34.5 3.3 2.3 Designed to meet UL/CSA/VDE ratings with relay proper- ly vented. Remove vent nib after soldering and cleaning. Max. Ambient Temp. vs. Coil Voltage UL/CSA Ratings @ 25°C: Code NO/NC Load Type Operations 1 12A NO @ 240VAC GP 30K 10A/5A @ 240VAC Resistive/GP 100K 8A @ 28VDC Resistive 30K 1 HP @ 240VAC* Motor 6K 1/2 HP @ 120VAC* Motor 6K 8A @ 28VDC* Resistive 30K B300 Pilot Duty 6K 3 16A/8A @ 240VAC GP 6K 8A @ 28VDC Resistive 30K 1/2 HP @ 120VAC* Motor 6K 1HP @ 240VAC* Motor 6K 48 LRA, 8 FLA @ 240VAC Motor 30K Max. Allowable Ambient Temp. (°C) B300 Pilot Duty 6K A: Coil temperature = Ambient temperature. 5 8A @ 240VAC Resistive 30K B: 110% of nominal coil voltage at rated contact load. 8A @ 28VDC Resistive/GP 30K 1/2 HP @ 240VAC Motor 6K 1/4 HP @ 120VAC Motor 6K Operate Data B300 Pilot Duty 6K Must Operate Voltage: See coil data. * Form A only Operate Time (Excluding Bounce): 8 ms, typ., at nom. voltage. Release Time (Excluding Bounce): 11 ms, typ., at nom. voltage. VDE Ratings @ 25°C: Code NO/NC Load Type Operations 1 12A @ 250VAC Resistive 30K Environmental Data 12A @ 250VAC Resistive 100K Temperature Range: 3 16A @ 250VAC Resistive 10K Storage: -40°C to +105°C. 16A @ 250VAC Resistive 50K Operating: -40°C to +70°C at rated current. Vibration: 30 - 150 Hz: 5 8A @ 250VAC Resistive 30K at 20g with no contact opening >10µs on the N.O. contact; 8A @ 250VAC Resistive 50K at 5g with no contact opening >10µs on the N.C. contact. Initial Dielectric Strength Mechanical Data Between Open Contacts: >1,000VAC (1 minute). Termination: Printed circuit terminals. Between Poles (code 5): >2,500VAC (1 minute). Enclosures: RT 1, 2, 3, 4: Flux-tight, top vented, plastic case. Between Coil and Contacts: >5,000VAC (1 minute). RT B, C, D, E: Immersion cleanable, plastic case. Creepage/Clearance, Coil to Contact: 10/10mm. Weight: 0.42 oz. (12g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 448 specified. Refer to inside back cover. Applied Coil Voltage (% of rated nom.) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information (AC Coil Model) Typical Part Number B RT D 1 4 524 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 1 = 1 pole 12A, Pinning 3.5mm, flux-tight (Code 1). B = 1 pole 12A, Pinning 3.5mm, sealed (Code 1). 2 = 1 pole 12A, Pinning 5mm, flux-tight (Code 2). C = 1 pole 12A, Pinning 5mm, sealed (Code 2). 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). D = 1 pole 16A, Pinning 5mm, sealed (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). E = 2 pole 8A, Pinning 5mm, sealed (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPDT) (Requires wiring diagram codes 1, 2 or 3.) 2 = 2 Form C (DPDT) (Requires wiring diagram code 5.) 3 = 1 Form A (SPST-NO) (Requires wiring diagram codes 1, 2 or 3.) 4 = 2 Form A (DPST-NO) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10. 5. Coil Voltage: 524 = 24VAC 615 = 115VAC 730 = 230VAC Note: All AC coil model RT part numbers are Schrack brand, are orange in color and have UL Class F (155°C) coil construction. Our authorized distributors are more likely to stock the following items for immediate delivery. RTE24524 RTB14524 RTD14524 RTD14615 RTE24615 RTB14615 RTE24730 RTB14730 RTD14730 Outline Dimensions Breaking Capacity 1 Pole 2 Pole .50 .62 (12.7) (15.7) 6X .031 X .020 50 50 (.80 X .52) A 10 10 B 1.14 5 5 (29) 2 2 A B 1 1 2X .020 X .020 0.5 0.5 (.52 X .52) .17 0.1 0.1 (4.3) 10 20 50 100 200 300 10 20 50 100 200 300 DC Voltage DC Voltage PC Board Layouts (Bottom View) A: 1 Contact. A: 16A Version. B: 2 Contacts in series. B: 12A Version. 1 Pole 16A 1 Pole 12A 1 Pole 12A 2 Pole 8A 3.5mm 5mm 5mm .051 DIA. .051 DIA. .051 DIA. (1.30) (1.30) (1.30) Contact Life for Resistive AC Load (Typical) .276 .400 .400 7 10 (7.0) (10.16) (10.16) A: 8A Model B: 12A Model C: 16A Model .800 .800 .800 (20.32) (20.32) (20.32) 6 10 B .051 DIA. .051 DIA. .051 DIA. .300 .300 .300 A (1.30) (1.30) (1.30) C 5 (7.62) (7.62) (7.62) 10 Code 1 Code 2 Code 3 & 5 Notes: 1. On single throw models, only necessary terminals are present. 4 10 2. With the recommended PCB hole sizes, a grid with a pattern from 0.0984 to 0.1 in (2.5 - 2.54 mm) can be used. 0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 Breaking Capacity (kVA) Note: Data from 250VAC @ 70°C. Wiring Diagrams (Bottom View) 1 Pole 12A 1 Pole 16A 2 Pole 8A Codes 1 & 2 Code 3 Code 5 Note: On single throw models, only necessary terminals are present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 449 specified. Refer to inside back cover. Operations Contact Current Contact Current Catalog 1308242 Issued 3-03 SCHRACK RT series Sockets and Accessories File E135149 File LR14385 NR 5318 RP78601 RT16016 RT78625 with RPMU0730 Sockets for RT Series Relays 1,2 1 1,2 RT78626 RT78624 RT78625 10A, 300VAC 1 Pole 10A, 250VAC 1 Pole 12A, 300VAC 2 Pole 2x 12A, 300VAC 3.5mm Pinning 2 Pole 2x 10A, 250VAC 5mm Pinning 5mm Pinning 21 11 21 11 22 12 24 14 14 21 11 14 24 2.972 Relay 2.972 2.972 (75.5) (75.5) (75.5) Ejector A2 A1 A2 A1 Module 22 12 A2 A1 .610 .610 .610 (15.5) (15.5) .874 (15.5) .874 .874 .177 .177 .177 (22.2) (22.2) (22.2) (4.5) (4.5) (4.5) 1.693 1.693 2.283 (43) (43) (58) 3 Hold-Down Spring RT16016 Hold-Down Spring RT16016 Ejector/Hold-Down Spring RT16016 1 1 RP78601 RP78602 10A, 250VAC 1 Pole 10A, 250VAC 3.5mm Pinning PC Board Layout 2 Pole 2x 10A, 250VAC PC Board Layout (Bottom View) 5mm Pinning (Bottom View) .20 .138 (5.08) (3.51) 1.22 1.22 (31.0) (31.0) .425 .425 .80 (10.8) .662 (10.8) (20.32) (16.82) .60 .189 .20 .189 (15.24) (4.8) .5 .5 (4.8) (5.08) (12.7) .189 (12.7) .189 (4.8) (4.8) Ş .06 DIA. .30 Ş .06 DIA. (1.52) .354 .354 .30 (7.62) (1.52) (9.0) (9.0) (7.62) Hold-Down Spring RP16041 Hold-Down Spring RP16041 Socket and Accessory Selection Table Stock items are boldfaced. Socket Socket Termination Hold-Down Spring 1,2 RT78624 DIN Screw Terminal Socket RT16016 1,2 RT78625 DIN Screw Terminal Socket RT16016 1 RT78626 DIN Screw Terminal Socket RT16016 * Note 1 RP78601 PCB Terminal Socket RY16041 1 1. Not suitable for bistable relay with two coils. RP78602 PCB Terminal Socket RY16041 2. For a 16A 1 pole relay the following jumpers have to be connected; 4 RPMT00A0 Protection Diode Module 1N4007 – 11 to 21, 12 to 22 and 14 to 24. RPMU0548 RC Network Module 24-48VAC – 3. Insertion of the relay. RPMU0730 RC Network Module 110-230VAC – 4 First the ejector (and eventually the module) has to be mounted onto the RPML0024 LED Module 12-24VDC – socket. Then the relay has to be set in the correct position and pressed RPML0524 LED Module 12-48VAC/VDC – 4 into the socket until the ejector snaps over the top of the relay. RPML0110 LED Module 110VDC – 4. Standard polarity: A1:+, A2:– RPML0730 LED Module 110-230VAC – Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 450 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RT series (Sensitive) 10 Amp, 1 Pole PC Board Relay with 250mW Coil File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data • Sensitive coil requires only 250mW. Termination: Printed circuit terminals. • 10A contacts in 1 Form A (SPST-NO) or 1 Form C (SPDT) arrangement. Enclosure (94 V-0 Rated): Flux-tight (RT II) or sealed (RT III) plastic case. • UL Class F coil construction. Weight: .49 oz. (14 g) approximately. • 5kV/10mm contact-to-coil. Contact Life Contact Data Arrangements: 1 Form A (SPST-NO) or 1 Form C (SPDT), single contact. Material: Silver-nickel 90/10. Expected Mechanical Life: 30 million operations. Ratings: Current: 10A. Voltage: 250VAC. Power (breaking): 2,500 VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): 15A. Load/Life 8A, 250VAC; 430,000 ops. 370W, 230VAC, compressor, NO contact; >330,000 ops. 550W, 250VAC, incandescent, NO contact; 190,000 ops. 0.8A /0.08A, 230VAC, cosϕ=0.23, peak contactor 190 / 90 VA, NO contact; >8.8 million ops. Initial Dielectric Strength Max. DC Load Breaking Capacity Between Open Contacts: 1,000Vrms Between Coil and Contacts: 5,000Vrms. Creepage/Clearance: 10/10mm. Coil Data DC @ 20°C Nominal Coil Power: 250mW. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in Voltage Voltage Voltage Current VDC Ohms VDC VDC VDC (mA) 5 100 ± 10% 3.7 0.5 15.0 50.0 6 144 ± 10% 4.5 0.6 18.0 41.7 12 576 ± 10% 9.0 1.2 36.0 20.8 24 2,304 ± 10% 18.0 2.4 72.0 10.4 48 9,216 ± 10% 36.0 4.8 144.0 5.4 60 12,857 ± 12% 45.0 6.0 180.0 4.7 Coil Operating Range Operate Data Must Operate Voltage: See Coil Data table. Operate Time (typical): 7 ms. Release Time (typical): 3 ms. Bounce Time (typical): NO: 2 ms; NC: 4 ms. Switching Rate: 3,600 ops./hr. max. at rated load. Environmental Data Nominal coil voltage (Un) Temperature Range: Operating: -40°C to +85°C. Vibration (30-150 Hz.): 5g. Shock (destructive): 100g. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 451 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RT 1 7 4 012 1. Basic Series: RT = Printed circuit board relay. 2.Version: 1 = 10A, 3.5mm pin spacing, flux-tight case. B = 10A, 3.5mm pin spacing, sealed case. 3. Contact Configuration: 7 = 1 Form C (SPDT) 8 = 1 Form A (SPST-NO) 4. Contact Material: K = Silver-nickel 90/10. 5. Coil Voltage: 005 = 5VDC 012 = 12VDC 048 = 48VDC 006 = 6VDC 024 = 24VDC 060 = 60VDC Stock Items – Authorized distributors are more likely to stock the following items. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) .50� 1.14� (29.0) (12.7) .62� 1 Form C (15.7) .150� (3.8) 1 Form A PC Board Layouts (Bottom Views) .099 GRID* .051 + .004 DIA. (2.52) (1.3 + .1) 1 Form C .090 .138 .138 (2.3) (3.5) (3.5) * With the recommended hole size, a grid pattern from .0984 - .1 in (2.5 - 2.54 mm) can be used. .099 GRID* .051 + .004 DIA. (2.52) (1.3 + .1) 1 Form A .090 .138 (2.3) (3.5) * With the recommended hole size, a grid pattern from .0984 - .1 in (2.5 - 2.54 mm) can be used. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 452 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RTH series 10-16 Amp, 1 Pole PC Board Relay for Operation to 105°C File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data • Sensitive (250mW) version with 10A, 1 Form A (SPST-NO) contacts. Temperature Range: • 16A version with 1 Form A (SPST-NO) or 1 Form C (SPDT) contacts. Operating: -40°C to +105°C. • UL Class F coil construction. Vibration (30-150 Hz.): Standard Coil NO / NC: 20 / 5g. • 5kV/10mm contact-to-coil. Sensitive Coil: 5g. • DC coil. Shock (destructive): 100g. Contact Data Mechanical Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). 1 Form C not Termination: Printed circuit terminals. available with sensitive coil. Enclosure (94 V-0 Rated): Flux-tight (RT II) plastic case. Material: Silver-nickel 90/10. Weight: .49 oz. (14 g) approximately. Expected Mechanical Life: 10 million operations. Ratings: Current: Standard Coil: 16A; Sensitive Coil: 10A. Contact Life Voltage: 250VAC. Power (breaking): Standard Coil: 4,000 VA; Sensitive Coil: 2,500VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): Standard Coil: 30A; Sensitive Coil: 15A. Load/Life – Standard Coil – Standard 1 Form A Contact 10 amp, 250VAC, 105°C; 150,000 ops. 16 amp, 250VAC, 105°C; 20,000 ops. Load/Life – Standard Coil – High Performance 1 Form A Contact 10 amp, 250VAC, 105°C; 300,000 ops. 16 amp ON / 8 amp OFF, 250VAC, 105°C; 250,000 ops. Load/Life – Sensitive Coil – 1 Form A Contact 12 amp, 250VAC, 105°C, dry switching; >500,000 ops. 10 amp, 250VAC, cyclical heat 105/40°C; 200,000 ops. 10 amp, 250VAC, 105°C; 150,000 ops. Models with Sensitive Coil Initial Dielectric Strength Max. DC Load Breaking Capacity Between Open Contacts: 1,000Vrms Between Coil and Contacts: 5,000Vrms. Creepage/Clearance: 10/10mm. Coil Data DC @ 20°C Nominal Coil Power: Sensitive Coil: 250mW.; Standard Coil: 400mW† † Standard coil continuous thermal load >10A at 105°C requires reduction of coil power to 64% of nominal after 100ms. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in Ohms Voltage Voltage Voltage Current VDC ±10% VDC VDC VDC (mA) Models with Standard Coil Models with Sensitive Coil Sensitive Coils (10A max. rating, 1 Form A only) 12 576 9.0 1.2 36.0 20.8 24 2,304 18.0 2.4 72.0 10.4 Coil Operating Range Standard Coils (16A max. rating, 1 Form A or 1 Form C) 9 203 6.3 0.9 22.9 44.3 12 360 8.4 1.2 30.6 33.3 24 1,440 16.8 2.4 61.2 16.7 Operate Data Must Operate Voltage: See Coil Data table. Operate Time (typical): Standard Coil: 7 ms. Sensitive Coil: 8 ms. Nominal coil voltage (Un) Nominal coil voltage (Un) Release Time (typical): Standard or Sensitive Coil: 3 ms. Bounce Time (typical): Standard Coil NO / NC: 1 / 3 ms. Sensitive Coil: 2 ms. Switching Rate: 3,600 ops./hr. max. at rated load. Models with Standard Coil Models with Sensitive Coil Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 453 specified. Refer to inside back cover. Applied coil voltage (U/Un) Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RTH 1 4 012 1. Basic Series: RTH = Printed circuit board relay for high temperature (105°C) applications. 2. Coil Type and Contacts: 1 = Standard coil, standard 1 Form C (SPDT) contacts, 16A rating 3 = Standard coil, standard 1 Form A (SPST-NO) contacts, 16A rating H = Standard coil, “high performance” 1 Form A (SPST-NO) contacts, 16A rating 8 = Sensitive coil, standard 1 Form A (SPST-NO) contacts, 10A rating 3. Contact Material: 4 = Silver-nickel 90/10. 4. Coil Voltage: 009 = 9VDC (standard version coil only) 012 = 12VDC 024 = 24VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) .50� 1.14� (29.0) (12.7) .62� (15.7) 1 Form C, Standard Coil Only .150� (3.8) 1 Form A, Standard or Sensitive Coil PC Board Layouts (Bottom Views) .099 GRID* .051 + .004 DIA. (2.52) (1.3 + .1) 1 Form C, Standard Coil Only .090 .197 .197 (2.3) (5.0) (5.0) * With the recommended hole size, a grid pattern from .0984 - .1 in (2.5 - 2.54 mm) can be used. .099 GRID* .051 + .004 DIA. (2.52) (1.3 + .1) 1 Form A, Standard or Sensitive Coil .090 .197 (2.3) (5.0) * With the recommended hole size, a grid pattern from .0984 - .1 in (2.5 - 2.54 mm) can be used. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 454 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RT series (High Inrush) 16 Amp, 1 Pole PC Board Relay for Inrush Currents to 80A File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Contact Life • Capable of handling 80A inrush currents. • 16A, 1 Form A (SPST-NO) contacts. • UL Class F coil construction. • 5kV/10mm contact-to-coil. • 400mW DC coil. Contact Data Arrangements: 1 Form A (SPST-NO), single contact. Material: Silver-nickel 90/10 or Silver-tin oxide. Expected Mechanical Life: 30 million operations. Ratings: Current: 16A. Voltage: 250VAC. Power (breaking): 4,000 VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): 30A. Peak Inrush Current (20ms): 80A. Load/Life – Silver-nickel contacts Max. DC Load Breaking Capacity 1000W, 250VAC, incandescent lamps; 90,000 ops. Load/Life – Silver-tin oxide contacts 1000W, 250VAC, incandescent lamps; 80,000 ops. Compressor, 230VAC, I ≤21A ,I =3.5A, cosϕ=0.5; 230,000 ops. in peak off Initial Dielectric Strength Between Open Contacts: 1,000Vrms Between Coil and Contacts: 5,000Vrms. Creepage/Clearance: 10/10mm. Coil Data DC @ 20°C Nominal Coil Power: 400mW. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in Voltage Voltage Voltage Current VDC Ohms VDC VDC VDC (mA) 12 360 ± 10% 8.4 1.2 30.6 33.3 24 1,440 ± 10% 16.8 2.4 61.2 16.7 48 5,520 ± 10% 33.6 4.8 122.4 8.7 60 7,340 ± 12% 42.0 6.0 153.0 8.1 Coil Operating Range Operate Data Must Operate Voltage: See Coil Data table. Operate Time (typical): 8 ms. Release Time (typical): 3 ms. Bounce Time (typical): 2 ms. Switching Rate: 3,600 ops./hr. max. at rated load. Environmental Data Temperature Range: Operating: -40°C to +85°C. Vibration (30-500 Hz.): 20g. Nominal coil voltage (Un) Shock (destructive): 100g. Mechanical Data Termination: Printed circuit terminals. Enclosure (94 V-0 Rated): Flux-tight (RT II) plastic case. Weight: .49 oz. (14 g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 455 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RT 3 3 K 012 1. Basic Series: RT = Printed circuit board relay. 2.Version: 3 = 16A, 5mm pin spacing, flux-tight case. 3. Contact Configuration: 3 = 1 Form A (SPST-NO) 4. Contact Material: K = Silver-nickel 90/10 contacts for high inrush currents. L = Silver-tin oxide contacts for high inrush currents. 5. Coil Voltage: 012 = 12VDC 048 = 48VDC 024 = 24VDC 060 = 60VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) .50� 1.14� (29.0) (12.7) .62� (15.7) .150� (3.8) PC Board Layout (Bottom View) .099 GRID* .051 + .004 DIA. (2.52) (1.3 + .1) .090 .197 (2.3) (5.0) * With the recommended hole size, a grid pattern from .0984 - .1 in (2.5 - 2.54 mm) can be used. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 456 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK 0429 series High Inrush (80A/20ms), Miniature Printed Circuit Board Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • 1 Form A (SPST-NO). Must Operate Voltage: See Coil Data table. • Tungsten prerun contact and silver-tin oxide contact. Operate Time (typical): 6 ms. • 10 amp rated current, 80A/20ms inrush current. Release Time (typical): 4 ms. • 4kV/8mm contact-to-coil, insulation to VDE 0631 and 0700. Bounce Time (typical): 3 ms. • Sensitive coil (480mW). Switching Rate: 6,000 ops./hr. max. at rated load. • Low-profile (.59 in [15 mm]) flux-tight case. • Well suited for lighting systems, motors, lamp loads. Contact Data Environmental Data Arrangements: 1 Form A (SPST-NO), single contact. Temperature Range: Material: Tungsten prerun contact and silver-tin oxide contact. Operating: -40°C to +70°C. Expected Mechanical Life: 5 million operations. Shock (destructive): 100g. Ratings: Current: 10A. Current (making, max. 4s at 10% duty cycle): 16A. Current (peak inrush 20ms): 80A. Voltage: 250VAC. Mechanical Data Voltage (breaking): 400VAC. Load/Life Termination: Printed circuit terminals. 10 amp resistive, 250VAC, 50,000 ops. Enclosure (94 V-0 rated): Flux-tight (RTII) plastic case. 2,500W, incandescent lamps, 30,000 ops. Weight: 0.35 oz. (10 g) approximately. 1,300W, fluorescent lamps (140µF), 30,000 ops. 1,000W, Dulux lamps (140µF), 30,000 ops. Coil Operating Range Initial Dielectric Strength Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20°C Nominal Coil Power: 480mW. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in Ohms Voltage Voltage Voltage Current VDC ±10% VDC VDC VDC (mA) Nominal coil voltage (Un) 6 80 4.2 0.4 12.0 75.0 12 300 8.4 0.9 24.0 40.0 24 1,200 16.8 1.8 48.0 20.0 48 4,825 33.6 3.6 96.0 10.0 60 7,500 42.0 4.5 120.0 8.0 Ordering Information Typical Part Number B 0429 03 13 12 00 1. Basic Series: 0429 03 = Miniature printed circuit board relay for high inrush currents. 2. Coil Voltage: 16 = 6VDC 13 = 12VDC 08 = 24VDC 05 = 48VDC 03 = 60VDC 3. Contact Material: 12 = Tungsten prerun contact and silver-tin oxide contact. 4.Version: 00 = Standard Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions PC Board Layout (Bottom View) Wiring Diagram (Bottom View) 1.12 .492 .051 + .004 DIA. .098 GRID (28.5) (12.5) (1.3 + .1) (2.5) .59 (15.0) .197 .087 (2.2) (5.0) .138 + .020 (3.5 + .5) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 457 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 OEG OMI/OMIH series 16A Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E58304 CSA File No. LR48471 VDE File No. 6678 SEMKO File No. 9517235 (OMI) 9143112 (OMIH) Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features OMI/OMIH-L Sensitive • Meet UL 508, VDE0435 and SEMKO requirements. • 1 Form A and 1 Form C contact arrangements. Rated Coil Nominal Coil Must Operate Must Release • Immersion cleanable, sealed version available. Voltage Current Resistance Voltage Voltage • Meet 5,000V dielectric voltage between coil and contacts. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Meet 10,000V surge voltage between coil and contacts (1.2 / 50μs). 5 106.4 47 3.75 0.50 6 88.0 68 4.50 0.60 9 58.0 155 6.75 0.90 12 44.4 270 9.00 1.20 24 21.8 1,100 18.00 2.40 Contact Data @ 20°C 48 10.9 4,400 36.00 4.80 Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Material: Ag Alloy (OMI), AgSnO (OMIH). OMI/OMIH-D Standard Max. Switching Rate: 300 ops./min. (no load). Rated Coil Nominal Coil Must Operate Must Release 30 ops./min. (rated load). Voltage Current Resistance Voltage Voltage Expected Mechanical Life: 10 million operations (no load). (VDC) (mA) (ohms) ± 10% (VDC) (VDC) Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. 5 138.9 36 3.50 0.50 Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. 6 120.0 50 4.20 0.60 9 78.3 115 6.30 0.90 12 60.0 200 8.40 1.20 24 29.3 820 16.80 2.40 Contact Ratings 48 14.5 3,300 33.60 4.80 Ratings: OMI: 10A @ 240VAC resistive, 10A @ 30VDC resistive, 3A @ 240VAC inductive (cosş= 0.4), Operate Data 3A @ 30VDC inductive (L/R=7msec). OMIH:16A @ 240VAC resistive, Must Operate Voltage: 16A @ 30VDC resistive, OMI/OMIH-D: 70% of nominal voltage or less. 4A @ 240VAC inductive (cosş= 0.4), OMI/OMIH-L: 75% of nominal voltage or less. 4A @ 24VDC inductive (L/R=7msec). Must Release Voltage: 5% of nominal voltage or more. Operate Time: OMI/OMIH-D: 15 ms max. Max. Switched Voltage: AC: 250V. OMI/OMIH-L: 20 ms max. DC: 30V. Release Time: 8 ms max. Max. Switched Current: 10A (OMI), 16A (OMIH). Max. Switched Power: OMI: 2,400VA, 300W. OMIH: 3,800VA, 480W. Environmental Data Temperature Range: Initial Dielectric Strength Operating: OMI/OMIH-D: -30°C to +55°C Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). OMI/OMIH-L: Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). -30°C to +70 °C Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50μs). Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). Initial Insulation Resistance 2 Operational: 100m/s (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Coil Data Mechanical Data Voltage: 5 to 48VDC. Termination: Printed circuit terminals. Nominal Power: 720 mW (OMI-D), 540mW (OMI-L). Enclosure (94V-0 Flammability Ratings): Coil Temperature Rise: 45°C max., at rated coil voltage. OMI/OMIH-SS: Vented (Flux-tight) plastic cover. Max. Coil Power: 130% of nominal. OMI/OMIH-SH: Sealed plastic case. Duty Cycle: Continuous. Weight: 0.46 oz (13g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 458 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OMIH -SH -1 24 L ,294 1. Basic Series: OMI = 10A rating OMIH = 16A rating 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Suffix: ,300 = Standard model for "SS" enclosure ,394 = Standard model for "SH" enclosure Other Suffix = Custom model Our authorized distributors are more likely to stock the following items for immediate delivery. OMIH-SH-105D,394 OMIH-SH-105L,394 OMIH-SH-112L,394 OMIH-SH-112D,394 OMIH-SH-124D,394 OMIH-SH-124L,394 Outline Dimensions Wiring Diagram (Bottom View) .811 ± .02 (20.6 ± .5) .157 ± .012 (4.0 ± .3) .02 (.5) .024 c .039 .039 .012 (.60) .012 (1.0) (1.0) (.3) (.3) .100 ± .008 1.15 ± .02 PC Board Layout (Bottom View) (2.55 ± .2) (29.2 ± .5) 3 – .059 DIA (1.5) .504 ± .02 (12.8 ± .5) .30 ± .008 2 – .047 DIA .30 ± .004 (7.6 ± .2) (1.2) (7.6 ± .1) .144 .650 .138 ± .004 (3.65) (16.5) .650 ± .004 (3.5 ± .1) .138 .138 (16.5 ± .1) (3.5) (3.5) .138 ± .004 (3.5 ± .1) Reference Data Coil Temperature Rise Operate Time Life Expectancy 12 100 60 OMIH type 240VAC, 24VDC Resistive 50 10 Operate Time 40 8 30 6 10 20 4 OMI type 250VAC, 30VDC Resistive 2 10 Release Time 1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 2 46 8 1012 14 16 18 20 Coil Power (W) Coil Power (W) (A) Contact Current Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 459 specified. Refer to inside back cover. Temp. Rise (C°) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG OMI 2 Pole series 2 Pole Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E58304 CSA File No. LR48471 VDE File No. 6678 SEMKO File No. 9517235 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features OMI-L Sensitive • Meet UL 508, VDE0435 and SEMKO requirements. • 2 Form A and 2 Form C contact arrangements. Rated Coil Nominal Coil Must Operate Must Release Voltage Current Resistance Voltage Voltage • Immersion cleanable, sealed version available. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Meet 5,000V dielectric voltage between coil and contacts. • Meet 10,000V surge voltage between coil and contacts (1.2 / 50μs). 5 106.4 47 4.00 0.50 6 88.0 68 4.80 0.60 9 58.0 155 7.20 0.90 12 44.4 270 9.60 1.20 24 21.8 1,100 19.20 2.40 Contact Data @ 20°C 48 10.9 4,400 38.40 4.80 Arrangements: 2 Form A (DPST-NO) and 2 Form C (DPDT). Material: Ag Alloy. OMI-D Standard Max. Switching Rate: 300 ops./min. (no load). Rated Coil Nominal Coil Must Operate Must Release 30 ops./min. (rated load). Voltage Current Resistance Voltage Voltage Expected Mechanical Life: 10 million operations (no load). (VDC) (mA) (ohms) ± 10% (VDC) (VDC) Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. 5 138.9 36 3.75 0.50 Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. 6 120.0 50 4.50 0.60 9 78.3 115 6.75 0.90 12 60.0 200 9.00 1.20 24 29.3 820 18.00 2.40 Contact Ratings 48 14.5 3,300 36.00 4.80 Ratings: 5A @ 240VAC resistive, 5A @ 120VAC resistive, 5A @ 30VDC resistive, Operate Data 1/8 HP @ 250VAC. Must Operate Voltage: OMI-D: 75% of nominal voltage or less. 1.5A @ 240VAC inductive (cosş= 0.4), OMI-L: 80 % of nominal voltage or less. 1.5A @ 120VAC inductive (cosş= 0.4), Must Release Voltage: 5% of nominal voltage or more. 1.5A @ 24VDC inductive (L/R=7msec). Operate Time: OMI-D: 15 ms max. OMI-L: 20 ms max. Max. Switched Voltage: AC: 240V. DC: 30V. Release Time: 8 ms max. Max. Switched Current: 5A. Max. Switched Power: OMI: 1,200VA, 150W. Environmental Data Temperature Range: Initial Dielectric Strength Operating: OMI-D: Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). -30°C to +55°C Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). OMI-L: Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50μs). -30°C to +70 °C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Initial Insulation Resistance Operational: 100m/s (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Coil Data Mechanical Data Voltage: 5 to 48VDC. Termination: Printed circuit terminals. Nominal Power: 720mW (OMI-D), 540mW (OMI-L). Enclosure (94V-0 Flammability Ratings): Coil Temperature Rise: 45°C max., at rated coil voltage. OMI-SS: Vented (Flux-tight) plastic cover. Max. Coil Power: 130% of nominal. OMI-SH: Sealed plastic case. Duty Cycle: Continuous. Weight: 0.46 oz (13g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 460 Refer to inside back cover. specified. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OMI -SS -2 12 L M ,594 1. Basic Series: OMI = 2 Pole Miniature Power PC Board Relay. 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 2 = 2 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 2 Form C, DPDT M = 2 Form A, DPST-NO 7. Suffix: ,500 = Standard model for "SS" enclosure ,594 = Standard model for "SH" enclosure Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to stock the following items for immediate delivery. OMI-SH-205L,594 OMI-SH-205D,594 OMI-SH-212D,594 OMI-SH-212L,594 OMI-SH-224L,594 OMI-SH-224D,594 Wiring Diagram (Bottom View) Outline Dimensions .811 ± .02 (20.6 ± .5) .157 ± .012 (4.0 ± .3) .012 .024 c .039 .039 .012 (.60) (.3) .012 (1.0) (.3) (1.0) (.3) .100 ± .008 PC Board Layout (Bottom View) 1.15 ± .02 (2.55 ± .2) (29.2 ± .5) 6 – .059 DIA (1.5) .504 ± .02 (12.8 ± .5) .30 ± .008 .30 ± .004 2 – .039 DIA (7.6 ± .2) (7.6 ± .1) (1.0) .2 .6 .2 .144 .600 (5.08) .2 (15.24) (5.08) (.067) .2 (15.24) (5.08) (5.08) Reference Data Coil Temperature Rise Operate Time Life Expectancy 12 60 100 240VAC, 24VDC 10 50 Resistive 8 40 Operate Time 30 6 10 20 4 2 10 Release Time 1 0.2 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 0.3 0.4 0.5 0.6 0.7 0.8 01 2 3 4 5 Coil Power (W) Coil Power (W) Contact Current (A) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 461 specified. Refer to inside back cover. Temp. Rise (°C) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG OZ/OZF series 16A Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E82292 CSA File No. LR48471 TUV File No. R85447 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features OZ-L Sensitive • Meet UL 508, CSA and TUV requirements. Rated Coil Nominal Coil Must Operate Must Release • 1 Form A and 1 Form C contact arrangements. Voltage Current Resistance Voltage Voltage • Immersion cleanable, sealed version available. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Meet 5,000V dielectric voltage between coil and contacts. • Meet 10,000V surge voltage between coil and contacts (1.2 / 50μs). 5 106.4 47 3.75 0.25 • Quick Connect Terminal type available (OZF). 6 88.0 68 4.50 0.30 • UL TV-8 rating available (OZT). 9 58.0 155 6.75 0.45 12 44.4 270 9.00 0.60 24 21.8 1,100 18.00 1.20 Contact Data @ 20°C 48 10.9 4,400 36.00 2.40 Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). OZ-D Standard Material: Ag Alloy (1 Form C) and AgSnO (1 Form A). Max. Switching Rate: 300 ops./min. (no load). Rated Coil Nominal Coil Must Operate Must Release 30 ops./min. (rated load). Voltage Current Resistance Voltage Voltage Expected Mechanical Life: 10 million operations (no load). (VDC) (mA) (ohms) ± 10% (VDC) (VDC) Expected Electrical Life: 100,000 operations (rated load). 5 138.9 36 3.50 0.25 Minimum Load: 100mA @ 5VDC. 6 120.0 50 4.20 0.30 Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. 9 78.3 115 6.30 0.45 12 60.0 200 8.40 0.90 24 29.3 820 16.80 1.20 48 14.5 3,300 33.60 2.40 Contact Ratings Ratings: OZ/OZF: 20A @ 120VAC resistive, 16A @ 240VAC resistive, 5A @ 120VAC inductive (cosş= 0.4), 5A @ 24VDC inductive ( L/R= 7msec). Operate Data Must Operate Voltage: OZT: 8A @ 240VAC resistive, OZ-D: 70% of nominal voltage or less. TV-8 @ 120VAC tungsten, 25,000ops. OZ-L: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Max. Switched Voltage: AC: 240V. Operate Time: OZ-D: 15 ms max. DC: 110V. OZ-L: 20 ms max. Max. Switched Current: 16A (OZ/OZF), 8A (OZT). Release Time: 8 ms max. Max. Switched Power: 3,850VA, 600W. Environmental Data Initial Dielectric Strength Temperature Range: Operating: OZ-D: -30°C to +55°C Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). OZ-L: -30°C to +70 °C Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50μs). Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Operational: 100m/s (10G approximately). Initial Insulation Resistance Operating Humidity: 20 to 85% RH. (Non-condensing). Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Mechanical Data Coil Data Termination: Printed circuit terminals. Voltage: 5 to 48VDC. Enclosure (94V-0 Flammability Ratings): Nominal Power: 720 mW (OZ-D), 540mW (OZ-L). OZ-S: Vented (Flux-tight) plastic cover. Coil Temperature Rise: 45°C max., at rated coil voltage. OZF-SS: Vented (Flux-tight) plastic cover. Max. Coil Power: 130% of nominal. OZ-SH: Sealed plastic case. Duty Cycle: Continuous. Weight: 0.46 oz (13g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 462 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OZ -SH -1 24 L M 1 ,294 1. Basic Series: OZ = 16A PC Board Terminals OZF = Quick Connect Terminals OZT = TV-8 Rating PC Board Terminals 2. Enclosure: S = Vent (Flux-tight)* plastic cover (only available with OZF) SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Contact Material: Blank = AgCdO (1 Form C) 1 = AgSnO (1 Form A, only available with OZ....LM1 or DM1) 8. Mounting and Termination: Blank = PC Board Terminals P = PC Board and Quick Connect Terminals (only available only with OZF-S-1..LM1P). 9. Suffix: ,200 = Standard model for "SS" enclosure on OZ and OZT ,000 = Standard model for coil input "D" on OZF Other Suffix = Custom model ,294 = Standard model for "SH" enclosure on OZ and OZT ,300 = Standard model for coil input "L" on OZF * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. OZ-SH-105D,294 OZ-SH-124D,294 OZ-SH-112LM1,294 OZ-SH-105L,294 OZ-SH-124L,294 OZ-SH-112L,294 OZ-SH-112D,294 OZ-SH-105LM1,294 OZ-SH-124LM1,294 Outline Dimensions PC Board Layouts (Bottom View) .092 ± .012 .061 DIA .266 ± .012 OZ OZF (2.35 ± .3) (1.55) (6.75 ± .3) .224 (5.7) .2 ± .002 OZ .187 8 – .059 DIA (.5 ± .05) (4.75) (1.5) .134 .25 (3.4) .126 (6.35) (3.2) .811 ± .02 .295 ± .012 (20.6 ± .5) (7.5 ± .3) .197 ± .012 (5.0 ± .3) .945 ± .08 .197 ± .012 (24.0 ± .2) (5.0 ± .3) .600 ± .012 .157 ± .012 (15.24 ± .3) (4.0 ± .3) .012 .024 c (.3) .012 .047 .047 (.60) .012 (.3) (1.2) (1.2) (.3) 1.15 ± .02 .165 ± .012 (29.2 ± .5) (4.2 ± .3) OZF .024 ± .004 .047 2 – .047 DIA 2 – .059 DIA (0.6 ± .1) .047 .047 (1.2) (1.5) .504 ± .02 (1.2) (1.2) (1.2) 1.14 ± .02 (12.8 ± .5) .394 (29.0 ± .5) .295 ± .012 (10.0) (7.5 ± .3) .300 ± .004 .394 ± .006 .394 ± .006 (7.6 ± .1) (10.0 ± .15) .300 ± .004 .085 ± .012 .59 ± .012 (10.0 ± .15) (7.6 ± .1) (2.15 ± .3) (15.0 ± .3) .197 ± .012 .073 ± .012 .197 ± .012 (5.0 ± .3) (1.85 ± .3) (5.0 ± .3) 1.02 ± .008 1.02 ± .02 .098 ± .004 .073 (26.0 ± .2) (26.0 ± .5) (2.5 ± .1) (1.85) Wiring Diagrams OZ OZF * * No electrical connection, (Bottom View) (Bottom View) (Top View) for board attachment only. Reference Data Operate Time Life Expectancy Operating Voltage 180 12 100 13A 8A 160 Maximum 10 16A 240VAC Resistive Allowable 140 Operate Time Coil Voltage Operating 120 8 Votage Range 100 13A/16A 6 10 80 8A Cool Coil 60 4 Hot Coil Applied 40 Pick-Up Voltage 2 20 Release Time 0 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 -40 -20 0 20 40 60 80 100 120 140 0 2 46 8 1012 14 16 18 20 Ambient T emp. (°C) Coil Power (W) Contact Current (A) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 463 specified. Refer to inside back cover. % of Supplying Voltage to Coil Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG OMIT series 10A Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E58304 CSA File No. LR48471 VDE File No. 6678 SEMKO File No. 8713114 SEV File No. 97550375 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C OMIT-L Sensitive Features Rated Coil Nominal Coil Must Operate Must Release • Meet UL 508, VDE0435, SEMKO and SEV requirements. Voltage Current Resistance Voltage Voltage • 1 Form A contact arrangements. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • UL TV-5 rating available. • Immersion cleanable, sealed version available. 5 106.4 47 3.75 0.25 • Meet 5,000V dielectric voltage between coil and contacts. 6 88.0 68 4.50 0.30 • Meet 10,000V surge voltage between coil and contacts (1.2 / 50μs). 9 58.0 155 6.75 0.45 12 44.4 270 9.00 0.90 24 21.8 1,100 18.00 1.20 48 10.9 4,400 36.00 2.40 Contact Data @ 20°C OMIT-D Standard Arrangements: 1 Form A. Rated Coil Nominal Coil Must Operate Must Release Material: AgSnO Voltage Current Resistance Voltage Voltage Max. Switching Rate: 300 ops./min. (no load). (VDC) (mA) (ohms) ± 10% (VDC) (VDC) 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). 5 138.9 36 3.50 0.25 Expected Electrical Life: 100,000 operations (rated load). 6 120.0 50 4.20 0.30 Minimum Load: 100mA @ 5VDC. 9 78.3 115 6.30 0.45 Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. 12 60.0 200 8.40 0.90 24 29.3 820 16.80 1.20 48 14.5 3,300 33.60 2.40 Contact Ratings Operate Data Ratings: 10A @ 240VAC resistive, Must Operate Voltage: TV-5 @ 120VAC tungsten 25,000ops. OMIT-D: 70% of nominal voltage or less. Max. Switched Voltage: AC: 240V. OMIT-L: 75% of nominal voltage or less. DC: 30V. Must Release Voltage: 5% of nominal voltage or more. Max. Switched Current: 10A. Operate Time: OMIT-D: 15 ms max. Max. Switched Power: 2,400VA, 300W. OMIT-L: 20 ms max. Release Time: 8 ms max. Initial Dielectric Strength Environmental Data Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Temperature Range: Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). Operating: OMT-D: Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50μs). -30°C to +55°C OMT-L: -30°C to +70 °C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Initial Insulation Resistance Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. 2 Operational: 100m/s (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Coil Data Voltage: 5 to 48VDC. Mechanical Data Nominal Power: 720 mW (OMI-D), 540mW (OMI-L). Termination: Printed circuit terminals. Coil Temperature Rise: 45°C max., at rated coil voltage (OMI-D). Enclosure (94V-0 Flammability Ratings): 35°C max., at rated coil voltage (OMI-L). OMIT-SS: Vented (Flux-tight) plastic cover. Max. Coil Power: 130% of nominal. OMIT-SH: Sealed plastic case. Duty Cycle: Continuous. Weight: 0.46 oz (13g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 464 Refer to inside back cover. specified. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OMIT -SS -1 12 L M ,300 1. Basic Series: OMIT = Miniature Sealed PC Board Relay 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard (720mW) L = Sensitive (540mW) 6. Contact Arrangement: Blank = 1 Form C, SPDT M = 1 Form A, SPST-NO 7. Suffix: ,300 = Standard model for "SS" enclosure ,394 = Standard model for "SH" enclosure Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for imnmediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) .811 ± .02 (20.6 ± .5) .157 ± .012 (4.0 ± .3) .012 .024 c .012 .039 .039 (.3) (.60) (.3) (1.0) (1.0) .100 ± .008 PC Board Layout (Bottom View) 1.15 ± .02 (2.55 ± .2) (29.2 ± .5) 2 – .059 DIA (1.5) .504 ± .02 (12.8 ± .5) .300 ± .008 2 – .047 DIA (7.6 ± .2) (1.2) .300 ± .008 (7.6 ± .2) .144 (3.65) .787 .138 .138 ± .004 .787 ± .004 (20.0) (3.5) (3.5 ± .1) (20.0 ± .1) Reference Data Coil Temperature Rise Operate Time Life Expectancy 100 60 12 240VAC Resistive 10 50 8 40 Operate Time 30 10 6 20 4 2 10 Release Time 1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 1 23 4 5 6 7 8 910 Coil Power (W) Coil Power (W) Contact Current (A) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 465 specified. Refer to inside back cover. Temp. Rise (°C) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG OMIF series 20A Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E82292 CSA File No. LR48471 VDE File No. 6031 TUV File No. R85447 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features Voltage: 12 to 24VDC. • Meet UL 508, CSA, VDE0435 and TUV requirements. Nominal Power: 540mW. • 1 Form A contact arrangements. Coil Temperature Rise: 35°C max., at rated coil voltage. • Quick Connect Terminal type. Max. Coil Power: 130% of nominal. • Meet 5,000V dielectric voltage between coil and contacts. Duty Cycle: Continuous. • Meet 10,000V surge voltage between coil and contacts (1.2 / 50μs). Coil Data @ 20°C OMIF Rated Coil Nominal Coil Must Operate Must Release Voltage Current Resistance Voltage Voltage Contact Data @ 20°C (VDC) (mA) (ohms) ± 10% (VDC) (VDC) Arrangements: 1 Form A. 12 44.4 270 9.00 0.60 Material: AgSnO 18 30.0 600 13.50 0.90 Max. Switching Rate: 300 ops./min. (no load). 24 21.8 1,100 18.00 1.20 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data Must Operate Voltage: 75% of nominal voltage or less. Contact Ratings Must Release Voltage: 5% of nominal voltage or more. Operate Time: 20 ms max. Ratings: 20A @ 125VAC resistive. Release Time: 10 ms max. 16A @ 250VAC resistive, 16A @ 24VDC resistive. Max. Switched Voltage: AC: 250V. DC: 24V. Max. Switched Current: 20A. Max. Switched Power: 4,000VA, 385W. Environmental Data Temperature Range: Operating: -30°C to +70°C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Operational: 100m/s (10G approximately). Initial Dielectric Strength Operating Humidity: 20 to 85% RH. (Non-condensing). Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50μs). Mechanical Data Termination: Printed circuit terminals with quick connect terminals. Enclosure (94V-0 Flammability Ratings): Initial Insulation Resistance OMIF-S: Vented (Flux-tight) plastic cover. Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Weight: 0.53 oz (15g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 466 Refer to inside back cover. specified. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OMIF -S -1 24 L M ,300 1. Basic Series: OMIF = 20A PC Board Terminals 2. Enclosure: S = Vented (Flux-tight)* plastic cover 3. Termination: 1 = 1 pole 4. Coil Voltage: 12 = 12VDC 18 = 18VDC 24= 24VDC 5. Coil Input: L = Sensitive (540mW) 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Suffix: ,300 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Wiring Diagram .224 .092 – .012 .266 – .012 (5.70) (2.35 – .3) (6.75 – .3) .187 .126 .020 (3.2) (4.75) (.5) (Top View) .061 DIA .25 (1.55) (6.35) .134 (3.4) (Bottom View) .964 – .012 (24.5 – .3) .189 – .012 (4.8 – .3) .024 c – .004 .020 .039 .039 .020 (.60 – .1) (.5) (1.0) (1.0) (.5) PC Board Layout (Bottom View) 1.14 – .02 (29.0 – .5) 2 – .059 DIA .496 – .012 (1.5) (12.6 – .3) .300 – .010 (7.6 – .25) 2 – .047 DIA .300 ± .004 (1.2) (7.6 ± .1) .075 – .008 .098– .008 (1.90 – .2) (2.50 – .2) .787 – .010 .138 – .010 (20.0 – .25) .138 ± .004 (3.5 – .25) .787 ± .004 1.00 – .010 .142 – .004 (20.0 ± .1) (3.5 ± .1) (25.4 – .25) (3.60 – .1) Reference Data Operating Voltage Operate Time Life Expectancy 180 12 100 0A-8A 160 Maximum 10 13A-16A 240VAC Resistive 140 Allowable Operate Time Coil Voltage Operating 120 8 Votage Range 100 6 10 80 60 4 Cool Coil 8A 13A-16A 40 Hot Coil Applied 2 20 Release Time Pick-Up Voltage 1 0 0.4 2 16 -40 -20 0 20 40 60 80 100 120 140 0.2 0.6 0.8 1.0 1.2 1.4 0 46 8 1012 14 18 20 Coil Power (W) Contact Current (A) Ambient T emp. (°C) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 467 specified. Refer to inside back cover. % of Supplying Voltage to Coil Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG PCI series Slim 2 Form A Miniature PC Board Relay Appliances, Audio Equipment, Office Machines UL File No. E82292 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features PCI • Slim and simple architecture. • 2 Form A (DPST-NO) contact arrangement. Rated Coil Nominal Coil Must Operate Must Release • Cadmium-free contacts. Voltage Current Resistance Voltage Voltage • UL, CSA, approvals. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Immersion cleanable, sealed version available. • Magnetic blow-out available for DC loads. 5 69.4 72 3.50 0.50 6 58.8 102 4.20 0.60 9 39.1 230 6.30 0.90 12 29.1 413 8.40 1.20 24 14.5 1,650 16.80 2.40 Contact Data @ 20°C Arrangements: 2 Form A (DPST-NO). Material: Ag-GS Alloy. Max. Switching Rate: 300ops./ min. (no load). 30ops./ min. (rated load). Expected Mechanical Life: 1 million ops (no load). Expected Electrical Life: 100,000 ops (rated load). Minimum Load: 1mA @ 1VDC. Initial Contact Resistance: 50 milliohms @ 1mA, 6VDC. Operate Data @ 20°C Must Operate Voltage: 70% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Operate Time : 15ms max. Release Time : 5ms max. Contact Ratings Ratings: 3A @ 24VDC resistive. 3A @ 120VAC resistive. Max. Switched Voltage: AC: 240V. DC: 50V. Environmental Data Max. Switched Current: 5A. Temperature Range: Max. Switched Power: 300VA, 90W. Operating: -30°C to +70°C. Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude. Operational: 10 to 55Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Initial Dielectric Strength Operational: 100m/s (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Between Open Contacts: 1,000VAC, 50/60 Hz. (1 min.). Between Adjacent Contacts: 2,000VAC, 50/60 Hz (1 min). Between Contacts and Coil: 4,000VAC, 50/60 Hz. (1 min.). Surge Voltage Between Coil and Contacts: 7,000V (1.2/50μs). Mechanical Data Termination: Printed circuit terminals. Initial Insulation Resistance Enclosure: Plastic sealed case with enclosure option "H". Between Mutually Insulated Conductors: 1,000Mohm @ 500VDCM. Otherwise, vented (flux-tight) cover. Weight: 0.41 oz (10.5g) approximately. Coil Data Voltage: 5 to 48VDC. Duty Cycle: Continuous. Nominal Power: 350mW. Max. Coil Power: 130% of nominal at 20°C. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 468 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Typical Part Number B PCI -2 05 D M ,000 1. Basic Series: PCI = Miniature relay 2. Termination: 2 = 2 pole 3. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 4. Coil Input: D = Standard 5. Contact Arrangement: M = 2 Form A 6. Enclosure: Blank = Vented (Flux-tight) cover H = Sealed plastic case 7. Optional: Blank = Standard M = with magnetic blow-out 8. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) .984 ± .02 (25.0 ± .5) .016 (.4) PC Board Layout (Bottom View) .016 .016 (.4) (.4) .039 .039 .018 c .157 ± .008 (.45) (1.0) (1.0) (4.0 ± .2) 4 – .051 DIA 2 – .039 DIA (1.3) (1.0) .394 ± .008 .295 ± .012 (7.5 ± .3) (10.0 ± .2) .295 ± .004 (7.5 ± .1) .59 ± .004 .094 .59 ± .008 .197 ± .004 (15.0 ± .1) (2.4) (15.0 ± .2) (5.0 ± .1) .197 ± .008 (5.0 ± .2) .945 ± .008 (24.0 ± .2) DC Cut Ability for Audio Speaker Loads 100 60 8Ω 6Ω 90 180 4Ω Maximum 80 50 20°C 3A 160 Allowable Operating Coil Voltage 70 140 Votage Range 40 60 120 Magnet Model 20°C 0A 100 Hot Coil (3A) 50 30 80 40 20 60 85°C 3A Cool Coil 30 non Magnet Model 40 Pick-Up Voltage 20 10 20 85°C 0A 10 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 -40 -20 0 20 40 60 80 100 120 140 0 2 46 8 10 12 14 16 18 20 22 24 Coil Power (W) Ambient T emp. (°C) Contact Current (A) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 469 specified. Refer to inside back cover. Temp. Rise (°C) % of Supplying Voltage to Coil Contact Voltage (VDC) Catalog 1308242 Issued 3-03 OEG OSA series 2 Pole Miniature Power PC Board Relay Appliances, Audio Equipment, Office Machines UL File No. E82292 CSA File No. LR48471 SEMKO File No. 9452086 (available for DM5) TUV File No. R9551879 (available for DM5) Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features • Meet UL TV-3 and CSA TV-4 rating available for DM5 type. OSA • 2 Form A contact arrangements. Rated Coil Nominal Coil Must Operate Must Release • Immersion cleanable, sealed version available. Voltage Current Resistance Voltage Voltage • Meet 3,000V dielectric voltage between coil and contacts. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Meet 5,000V surge voltage between coil and contacts (1.2 / 50μs). 5 106.4 47 3.75 0.50 6 88.0 68 4.50 0.60 Contact Data @ 20°C 9 58.0 155 6.75 0.90 12 44.4 270 9.00 1.20 Arrangements: 2 Form A (DPST-NO). 24 21.8 1,100 18.00 2.40 Material: Ag-GS Alloy (DM3) and AgSnO (DM5). 48 11.0 4,400 36.00 4.80 Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: OSA-DM3: 1mA @ 1VDC. OSA-DM5: 100mA @ 5VDC. Initial Contact Resistance: 50 milliohms @ 1A, 6VDC. Operate Data Must Operate Voltage: 75% of nominal voltage or less. Contact Ratings Must Release Voltage: 10% of nominal voltage or more. Operate Time:20 ms max. Ratings: OSA-DM3: 3A @ 120VAC resistive, Release Time: 10 ms max. 3A @ 24VDC resistive, OSA-DM5: 5A @ 240VAC resistive, 5A @ 30VDC resistive, TV-3 @ 120VAC Tungsten (UL), TV-4 @ 120VAC Tungsten (CSA). Max. Switched Voltage: Environmental Data OSA-DM3: AC: 240V.DC: 50V. OSA-DM5: AC: 250V.DC: 30V. Temperature Range: Max. Switched Current: 5A Operating:-30°C to +60°C Max. Switched Power: Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude OSA-DM3: 300VA. Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 OSA-DM5: 1,100VA. Shock, Mechanical: 1,000m/s (100G approximately). 2 Operational: 100m/s (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 3,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 5,000V (1.2 / 50μs). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Coil Data OSA-SS: Vented (Flux-tight) plastic cover. Voltage: 5 to 48VDC. OSA-SH: Sealed plastic case. Nominal Power: 540 mW Weight: 0.46 oz (13g) approximately. Coil Temperature Rise: 50°C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 470 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OSA -SS -2 24 D M 3 ,000 1. Basic Series: OSA = Miniature Power PC board relay. 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 2 = 2 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard 6. Contact Arrangement: M = 2 Form A, DPST-NO 7. Contact Rating: 3 = 3A @ 120VAC resistive (DM3). 5 = 5A @ 240VAC resistive (DM5). 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .976 ± .02 (24.8 ± .5) .157 ± .02 (4.0 ± .5) .012 .039 ± .004 .02 .039 ± .004 .018 (.3) (1.0 ± .1) (.5) (1.0 ± .1) (.45) .106 ± .008 .96 ± .02 (2.7 ± .2) PC Board Layout (Bottom View) (24.4 ± .5) .508 ± .02 4 – .047 DIA (12.9 ± .5) (1.2) .295 ± .008 (7.5 ± .2) .295 ± .004 2 – .039 DIA (7.5 ± .1) (1.0) .59 ± .008 .106 ± .008 (15.0 ± .2) (2.7 ± .2) .197 ± .008 .59 ± .004 .197 ± .004 .077 ± .008 (5.0 ± .2) (15.0 ± .1) (5.0 ± .1) (1.95 ± .2) .096 ± .008 (2.45 ± .2) Reference Data Coil Temperature Rise Operate Time Life Expectancy 12 100 60 DM5 T ype, 240VAC, 30VDC 10 50 Resistive 8 40 Operate Time 30 6 10 DM3 T ype, 120VAC, 24VDC Resistive 20 4 2 10 Release Time 1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.2 0.4 0.6 0.8 1.0 1.2 1.4 01 2 3 4 5 Coil Power (W) Coil Power (W) Contact Current (A) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 471 specified. Refer to inside back cover. Temp. Rise (°C) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG OSZ series 1 Pole Miniature Power PC Board Relay Appliances, HVAC, Office Machines UL File No. E58304 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features • Meet UL Tungsten TV-8 rating. OSZ • 1 Form A contact arrangements. Rated Coil Nominal Coil Must Operate Must Release • Immersion cleanable, sealed version available. Voltage Current Resistance Voltage Voltage • Meet 4,000V dielectric voltage between coil and contacts. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Meet 7,000V surge voltage between coil and contacts (1.2 / 50μs). 5 106.4 47 3.75 0.25 6 88.0 68 4.50 0.30 9 58.0 155 6.75 0.45 12 44.4 270 9.00 0.60 Contact Data @ 20°C 24 21.8 1,100 18.00 1.20 48 11.0 4,400 36.00 2.40 Arrangements: 1 Form A (SPST-NO). Material: AgSnO. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Contact Ratings Operate Time:20 ms max. Ratings: 16A @ 240VAC resistive, Release Time: 10 ms max. 16A @ 24VDC resistive, TV-8 @ 120VAC Tungsten, 25,000ops. Max. Switched Voltage: AC: 240V. DC: 24V. Max. Switched Current: 16A. Max. Switched Power: 2,400VA, 380W. Environmental Data Temperature Range: Operating:-30°C to +65°C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Operational: 100m/s (10G approximately). Initial Dielectric Strength Operating Humidity: 20 to 85% RH. (Non-condensing). Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 4,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 7,000V (1.2 / 50μs). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Coil Data OSZ-SS: Vented (Flux-tight) plastic cover. Voltage: 5 to 48VDC. OSZ-SH: Sealed plastic case. Nominal Power: 540 mW Weight: 0.45 (13g) approximately. Coil Temperature Rise: 55°C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 472 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B OSZ -SS -1 12 D M 8 ,000 1. Basic Series: OSZ = Miniature Power PC board relay. 2. Enclosure: SS = Vent (Flux-tight)* plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard 6. Contact Arrangement: M = 1 Form A, SPST-NO. 7. Contact Rating: 8 = TV-8 rating 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .976 ± .02 (24.8 ± .5) .157 ± .02 (4.0 ± .5) .012 PC Board Layout (Bottom View) .035 .035 .02 .018 (.3) (.9) (.9) (.5) (.45) 4 – .047 DIA .96 ± .02 (1.2) (24.4 ± .5) .508 ± .02 .295 ± .004 (12.9 ± .5) 2 – .039 DIA .295 ± .008 (7.5 ± .1) (1.0) (7.5 ± .2) .59 ± .004 .197 ± .004 .197 ± .008 (15.0 ± .1) .077 .59 ± .008 (5.0 ± .1) (5.0 ± .2) (15.0 ± .2) (1.95) .096 (2.45) Reference Data Coil Temperature Rise Operate Time Life Expectancy 100 180 12 DM8 T ype, 160 240VAC, 24VDC Maximum 10 Resistive 16A Allowable 140 Operate Time Operating Coil Voltage 8 Votage Range 120 8A 8A 100 16A 6 10 80 Cool Coil 60 4 Hot Coil Applied DM5 T ype, 40 Pick-Up Voltage 2 240VAC,24VDC Release Time Resistive 20 1 0 0.4 0.2 0.6 0.8 1.0 1.2 1.4 0 2 4 68 10 12 14 16 18 20 -40 -20 0 20 40 60 80 100 120 140 Contact Current (A) Ambient T emp. (°C) Coil Power (W) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 473 specified. Refer to inside back cover. % of Supplying Voltage to Coil Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG SDT series 10 Amp Miniature Power PC Board Relay Appliances, HVAC, CTV, Monitor Display UL File No. E82292 CSA File No. LR48471 SEMKO File No. 9308008 TUV File No. R9551731 SEV File No. 97550375 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features SDT • UL TV-5 rating relay. • 1 Form A contact arrangement. Rated Coil Nominal Coil Must Operate Must Release • Immersion cleanable, sealed version available. Voltage Current Resistance Voltage Voltage • Applications include appliance, HVAC, CTV, monitor, emergency lighting. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) 5 106.4 47 3.75 0.50 6 88.0 68 4.50 0.60 9 58.0 155 6.75 0.90 Contact Data @ 20°C 12 44.4 270 9.00 1.20 24 21.8 1,100 18.00 2.40 Arrangements: 1 Form A (SPST-NO) 48 10.9 4,400 36.00 4.80 Material: AgSnO. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Contact Ratings Operate Time: 15 ms max. Ratings: 5A Tungsten @ 120VAC (TV-5) 25,000ops. Release Time: 8 ms max. 10A @ 250VAC resistive, 10A @ 120VAC resistive, 10A @ 30VDC resistive. 3A @ 250VAC inductive (cosş= 0.4), 3A @ 30VDC inductive (L/R=7msec). Max. Switched Voltage: AC: 250V. DC: 30V. Max. Switched Current: 10A. Environmental Data Max. Switched Power: 2,500VA, 300W. Temperature Range: Operating: -30°C to +70°C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Initial Dielectric Strength 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Between Open Contacts: 900VAC 50/60 Hz. (1 minute). Operational: 100m/s (10G approximately). Between Coil and Contacts: 4,000VAC 50/60 Hz. (1 minute). Operating Humidity: 20 to 85% RH. (Non-condensing). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50μs). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Mechanical Data Coil Data Termination: Printed circuit terminals. Voltage: 5 to 48VDC. Enclosure (94V-0 Flammability Ratings): Nominal Power: 540 mW SDT-SS: Vented (Flux-tight) plastic cover Coil Temperature Rise: 40°C max., at rated coil voltage. SDT-SH: Sealed plastic case Max. Coil Power: 130% of nominal. Weight: 0.39 oz (11g) approximately. Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 474 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B SDT -SS -1 12 D M ,000 1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: SS = Vented (Flux-tight) * plastic cover. SH = Sealed, plastic case. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: D = Standard 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) .984 ± .02 (25.0 ± .5) PC Board Layout (Bottom View) .018 4 — .05 DIA (.4) .012 .031 .031 (1.3) .018 (.3) (.8) (.8) (.45) .96 ± .02 .295 – .004 (24.4 ± .5) (7.5 – .1) .409 ± .02 .295 ± .010 .646 – .004 .38 – .004 (10.4 ± .5) (7.5 ± .25) (16.4 – .1) (3.5 – .1) .646 ± .012 .38 ± .008 (16.4 ± .3) (3.5 ± .2) .100 (2.55) Reference Data Operating Voltage Operate Time Life Expectancy 180 12 100 160 250VAC, 30VDC 5A Maximum 10 Resistive Allowable 140 Operate Time Coil Voltage Operating 8 120 Votage Range 1A 100 5A 6 10 80 Cool Coil 1A 60 4 Hot Coil Applied 40 Pick-Up Voltage 2 20 Release Time 1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 1 2 3 4 5 6 7 -40 -20 0 20 40 60 80 100 120 140 Coil Power (W) Contact Current (A) Ambient T emp. (°C) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 475 specified. Refer to inside back cover. % of Supplying Voltage to Coil Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG SDT–R series 10 Amp Miniature Power PC Board Relay Appliances, HVAC, CTV, Monitor Display. UL File No. E58304 CSA File No. LR48471 SEMKO FileNo. 9722134, 9803052 TUV File No. R9750487 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features • UL TV-5 and TV-8 rating relay. SDT-LMR (250mW) • 1 Form A contact arrangement. Rated Coil Nominal Coil Must Operate Must Release • Sensitive and standard coils available. Voltage Current Resistance Voltage Voltage • Applications include appliance, HVAC, CTV, Monitor, emergency lighting. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) 5 50.0 100 3.75 0.50 6 41.7 144 4.50 0.60 Contact Data @ 20°C 9 27.7 325 6.75 0.90 Arrangements: 1 Form A (SPST-NO) 12 20.7 580 9.00 1.20 Material: AgSnO 24 10.5 2,300 18.00 2.40 Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). SDT-DMR (400mW) Expected Mechanical Life: 10 million operations (no load). Rated Coil Nominal Coil Must Operate Must Release Expected Electrical Life: 100,000 operations (rated load). Voltage Current Resistance Voltage Voltage Minimum Load: 100mA @ 5VDC. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. 5 106.4 47 3.75 0.50 6 88.0 68 4.50 0.60 9 58.0 155 6.75 0.90 Contact Ratings 12 44.4 270 9.00 1.20 24 21.8 1,100 18.00 2.40 Ratings: 48 10.9 4,400 36.00 4.80 SDT-LMR: 5A Tungsten @ 120VAC (TV-5) 25,000ops. 5A @ 250VAC resistive, 5A @ 30VDC resistive. SDT-DMR: 8A Tungsten @ 120VAC (TV-8) 25,000ops. 10A @ 250VAC resistive, Operate Data 10A @ 30VDC resistive. Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 10% of nominal voltage or more. Max. Switched Voltage: AC: 250V. Operate Time:15 ms max. DC: 30V. Release Time: 5 ms max. Max. Switched Current: 5A (SDT-LMR), 10A (SDT-DMR) Max. Switched Power: 1,250VA, 150W (SDT-LMR), 2,500VA, 300W (SDT-DMR). Initial Dielectric Strength Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Environmental Data Between Coil and Contacts: 4,000VAC 50/60 Hz. (1 minute). Temperature Range: Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50μs). Operating:-30°C to +70°C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. Initial Insulation Resistance 2 Shock, Mechanical: 1,000m/s (100G approximately). Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. 2 Operational: 100m/s (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Coil Data Voltage: 5 to 48VDC. Nominal Power : SDT-LMR : 250 mW Mechanical Data SDT-DMR : 540 mW Termination: Printed circuit terminals. Coil Temperature Rise: 40°C max., at rated coil voltage. Enclosure (94V-0 Flammability Ratings): Max. Coil Power: 130% of nominal. SDT-S: Snap-on dust cover (Flux-tight). Duty Cycle: Continuous. Weight: 0.38 oz. (11g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 476 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B SDT -S -1 12 L M R ,000 1. Basic Series: SDT = Miniature Power PC board relay. 2. Enclosure: S = Snap-on (Flux-tight)* cover. 3. Termination: 1 = 1 pole 4. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 5. Coil Input: L = Sensitive (250mW) D = Standard (540mW) 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Construction: R = New construction 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .984 ± .012 (25.0 ± .3) .039 .018 (1.0) (.4) PC Board Layout (Bottom View) .02 .018 .008 (.5) .039 (.45) (.2) (1.0) 2 – .059 DIA (1.5) .295 .394 ± .012 (7.5) (10.0 ± .3) .295 ± .004 2 – .05 DIA (7.5 ± .1) (1.3) .138 ± .008 .646 ± .012 (3.5 ± .2) (16.4 ± .3) .646 ± .004 .38 ± .004 .098 (16.4 ± .1) (3.5 ± .1) .945 ± .012 (2.5) (24.0 ± .3) Reference Data Operating Voltage (SDT-LMR) Operate Time Life Expectancy 180 24 100 160 250VAC Resistive 20 Maximum (540mW Coil) Operating 140 Allowable Voltage Range Coil 16 120 Voltage 100 12 10 80 Operate Time 250VAC Resistive Cool Coil (250mW Coil) 60 8 Hot Coil 5A Applied 40 Pick-Up Voltage 4 20 Release Time 1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 6 8 10 2 4 12 -40 -20 0 20 40 60 80 100 120 140 Ambient T emp. (°C) Coil Power (W) Contact Current (A) Note: This data is based on the max. allowable temperature for E type insulation coil (115°C). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 477 specified. Refer to inside back cover. % of Supplying Voltage to Coil Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 OEG PCK series Slim 16 Amp Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E82292 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20°C • Slim outline to save board space. PCK • 1 Form A contact arrangement. Rated Coil Nominal Coil Must Operate Must Release • Quick connect terminal type. Voltage Current Resistance Voltage Voltage • Meet 5,000V dielectric voltage between coil and contacts. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Meet 10,000V surge voltage between coil and contacts. 5 100.0 50.0 3.75 0.25 6 83.3 72.0 4.50 0.30 9 55.6 162.0 6.75 0.45 12 41.7 288.0 9.00 0.60 Contact Data @ 20°C 18 27.8 648.0 13.50 0.90 Arrangements: 1 Form A (SPST-NO) . 24 20.9 1,150.0 18.00 1.20 Material: AgSnO. Max. Switching Rate: 300ops./ min. (no load). 20ops./ min. (rated load). Expected Mechanical Life: 2 million ops (no load). Expected Electrical Life: 100,000 ops (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data @ 20°C Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Contact Ratings Operate Time: 20ms max. Release Time: 10ms max. Ratings: 16A @ 250VAC resistive. 16A @ 24VDC resistive. Max. Switched Voltage: AC: 277V. DC: 24V. Max. Switched Current: 16A. Max. Switched Power: 4,000VA, 385W. Environmental Data Temperature Range: Operating: -30°C to +70°C. Initial Dielectric Strength Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude. Operational: 10 to 55Hz., 1.5mm double amplitude. Between Open Contacts: 1,000VAC, 50/60 Hz. (1 min.). 2 Shock, Mechanical: 1000m/s (100G approximately). Between Contacts and Coil: 5,000VAC, 50/60 Hz. (1 min.). 2 Operational: 100m/s (10G approximately). Surge Voltage Between Coil and Contacts: 10,000V (1.2/50μs). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Conductors: 1,000Mohm @ 500VDC. Mechanical Data Coil Data Termination: Printed circuit terminals with quick connect terminals. Voltage: 5 to 24VDC. Enclosure: Vented (Flux-tight) plastic cover. Duty Cycle: Continuous. Weight: 0.46 oz (13g) approximately. Nominal Power: 500mW. Max. Coil Power: 130% of nominal at 20°C. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 478 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B PCK -1 12 D 2 M ,000 1. Basic Series: PCK = 16A PC board terminals 2. Termination: 1 = 1 pole 3. Coil Voltage: 05 = 5VDC 09 = 9VDC 18 = 18VDC 06 = 06VDC 12 = 12VDC 24 = 24VDC 4. Coil Input: D = Standard 5. Contact Material: 2 = AgSnO 6. Contact Arrangement: M = 1 Form A (SPST-NO) 7. Suffix: ,000 = Standard model Other Suffix = Custom model Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .22 .236 (5.60) (6.0) .126 .069 .183 (3.20) (1.75) .020 (4.65) (.5) .020 DIA .25 (.5) .061 DIA (6.35) (1.55) .077 (1.95) 1.05 (26.7) PC Board Layout (Bottom View) .020 .138 .012 (.5) .039 .039 .020 (3.5) (.3) (1.0) (1.0) (.5) 2 – .051 DIA .043 .677 .039 .039 .043 .677 (1.10) (17.20) (1.30) .102 .024 (1.0) (1.0) (1.10) (17.20) (2.60) (0.60) 2 – .059 DIA .295 .057 .024 .041 (1.50) .295 (7.50) .041 (1.45) (0.60) (1.05) (7.50) (1.05) Reference Data Operate Time Coil Temperature Rise Life Expectancy 70 14 100 100 250VAC RESISTIVE, 12 60 D TYPE (20 AMP) 50 10 Operate Time 40 8 10 30 6 250VAC RESISTIVE, H TYPE (16 AMP) 20 4 Release Time 2 10 0 0 1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 0 0.2 0.4 0.6 0.8 1.2 02 4 6 8 1012 1416182022 1.0 1.4 Coli Power (W) Coil Power (W) Contact Current (A) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 479 specified. Refer to inside back cover. Temp Rise (°C) Time (msec) 4 Operation (x10 ) Catalog 1308242 Issued 3-03 SCHRACK V23057 (Card E) series 8 Amp, Miniature Printed Circuit Board Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data • 1 Form A (SPST-NO) and 1 Form C (SPDT). Termination: Printed circuit terminals. • 8 amp rated current. Enclosure (94 V-0 rated): Sealed (RTIII) plastic case. • Vertical or horizontal version. Weight: 0.28 oz. (8 g) approximately. • Single or bifurcated contacts. • 4,000Vrms contact-to-coil dielectric. • Washable (sealed) plastic case. Contact Data Contact Life Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT), single or bifurcated contact. Material: Silver-nickel 0.15, silver-nickel 20 or silver-cadmium oxide. Expected Mechanical Life: 20 million operations. Ratings: Current: 8A; 5A with silver-nickel 0.15 contacts. Voltage: 250VAC. Power (breaking): 2,000 VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): 15A. Silver-nickel 0.15 4 amp resistive, 30VDC, 2 million ops 1 amp inductive L / R = 40 ms, 24VDC, 200,000 ops. Silver-cadmium oxide 1 amp cosj = 0.4, 230VAC, 500,000 ops. Initial Dielectric Strength Max. DC Load Breaking Capacity Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 4/4mm. Coil Data DC @ 20°C Nominal Coil Power: 450 - 500mW, dependent upon model. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in Voltage Voltage Voltage Current VDC Ohms VDC VDC VDC (mA) 6 80 ±10% 4.0 0.6 10.6 75.0 12 330 ±10% 8.0 1.2 21.5 36.4 24 1,200 ±15% 16.0 2.4 40.0 20.0 48 4,700 ±15% 32.0 4.8 79.0 10.2 Coil Operating Range 60 7,200 ±15% 40.0 6.0 98.0 8.3 Operate Data Must Operate Voltage: See Coil Data table. Operate Time: 7 ms. Release Time: 3 ms. Bounce Time (N/O contact / N/C contact) : 0.5 ms / 3 ms. Switching Rate: 3,600 ops./hr. max. at rated load. Nominal coil voltage (Un) Environmental Data Temperature Range: Operating: -40°C to +70°C. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 480 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B V23057 -A 0 006 -A 1 01 1. Basic Series: V23057 = Card E miniature printed circuit board relay. 2. Mounting Orientation: A = Horizontal. B = Vertical. 3.Version: 0 = Standard 4. Coil Voltage: 001 = 6VDC 002 = 12VDC 006 = 24VDC 013 = 48VDC 023 = 60VDC 5. Contact Type: A = Single contact. B = Bifurcated contact (Not available on 1 Form A version). 6. Contact Material: 1 = Silver-nickel 0.15 2 = Silver-nickel 20 4 = Silver-cadmium oxide 7. Contact Arrangement: 01 = 1 Form C (SPDT) 02 = 1 Form A (SPST-NO) Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) 1.10 MAX.� .409� (28.0) (10.4) .988� Vertical Version Vertical Version (25.1) .124� .138� (3.15) (3.5) .984 MAX.� 1.10 MAX.� (25.0) (28.0) Horizontal Version .425 MAX.� Horizontal Version (10.8) .197� .130� .138� (5.0) (3.3) (3.5) PC Board Layouts (Bottom Views) .098 - .1 GRID .051 + .004 DIA. (2.5 - 2.54) (1.3 + .1) Vertical Version .222 (5.65) .098 - .1 GRID .051 + .004 DIA. (2.5 - 2.54) (1.3 + .1) .197 Horizontal Version (5.0) .130 (3.3) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 481 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RP II/2 series 8 Amp, 2 Pole PC Board Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data • 2 Form A (DPST-NO) or 2 Form C (DPDT). Temperature Range: • 8 amp rating with terminals on 5 mm pin spacing. Operating: -40°C to +70°C. • 4kV/8mm contact-to-coil. Vibration (30-150 Hz.): N/O: 11g; N/C: 1.5g. • Sockets available. Shock (destructive): 100g. Mechanical Data Contact Data Termination: Printed circuit terminals. Arrangements: 2 Form A (DPST-NO) and 2 Form C (DPDT), single contact. Enclosure: Flux-tight (RT II) plastic case or sealed (RT III) cover. Material: Silver-cadmium oxide or silver-nickel 0.15. Weight: .63 oz. (18 g) approximately. Expected Mechanical Life: 20 million operations. Ratings: Current: 8A (UL: 10A) Contact Life Voltage: 250VAC Power (breaking): 2,000VA Voltage (breaking): 440VAC Make Current (max. 4s at 10% duty cycle): 14A Load/Life Type Load Life (Ops.) RP440 64A ON, 2A OFF, 250VAC 10,000 RP421 2A, 50VDC, resistive 2 million RP421 1/10 HP, 240VAC, per contact UL 508 RP4213A,380VAC,AC11 30,000 RP421 0.18A, 110VDC, DC11 100,000 RP420 0.6A, 220VAC, cosϕ = 0.8, single phase motor 1.3 million Max. DC Load Breaking Capacity Initial Dielectric Strength Between Open Contacts: 1,000Vrms Between Coil and Contacts: 4,000Vrms. Between Contact Sets: 2,500Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20°C Nominal Coil Power: 500mW. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in VoltageVoltageVoltageCurrent VDC Ohms VDC VDC VDC (mA) Coil Operating Range 5 54 ± 10% 3.5 0.5 9.0 92.6 6 68 ± 10% 4.2 0.6 10.8 88.2 12 270 ± 10% 8.4 1.2 21.6 44.4 24 1,100 ± 15% 16.8 2.4 43.2 21.8 48 4,400 ± 15% 33.6 4.8 86.4 10.9 60 6,540 ± 15% 42.0 6.0 108.0 9.2 110 23,100 ± 15% 77.0 11.0 198.0 4.8 Operate Data Nominal coil voltage (Un) Must Operate Voltage: See Coil Data table. Operate Time (typical): 9 ms. Release Time (typical): 3 ms. Bounce Time (typical): N/O: 2 ms; N/C: 3 ms. Switching Rate: 6.000 ops./hr. max. at rated load. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 482 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RP 4 1 0 012 1. Basic Series: RP = Printed circuit board relay. 2.Version: 4 = 8A, flux-tight. 8 = 8A, sealed. 3. Contact Arrangement: 2 = 2 Form C (DPDT). 4 = 2 Form A (DPST-NO). 4. Contact Material and Pin Spacing: 0 = Silver-cadmium oxide, 5 mm pin spacing. 1 = Silver-nickel 0.15, 5 mm pin spacing. 5. Coil Voltage: 005 = 5VDC 012 = 12VDC 048 = 48VDC 110 = 110VDC 006 = 6VDC 024 = 24VDC 060 = 60VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) 1.14 .496 (29.0) (12.6) 2 Form C 1.00 (25.5) .130 (3.3) 2 Form A PC Board Layout (Bottom View) .098 - .1 GRID .051 + .004 DIA. (2.5 - 2.54) (1.3 + .1) .094 .197 .197 (2.4) (5.0) (5.0) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 483 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RP II/1 series 8-16 Amp, 1 Pole PC Board Relay File E214025 12A Version Only Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data • 1 Form A (SPST-NO) or 1 Form C (SPDT). Temperature Range: • 8 and 12 amp models available with 3.5 or 5mm pin spacing. Operating: -40°C to +70°C. • 16 amp models available with 5mm pin spacing. Vibration (30-300 Hz.): N/O: >10g; N/C: 2g. • 4kV/8mm contact-to-coil. Shock (destructive): 100g. • Sockets available. Mechanical Data Contact Data Termination: Printed circuit terminals. Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT), single contact. Enclosure: Flux-tight (RT II) plastic case or sealed (RT III) cover. Material: Silver-cadmium oxide or silver-nickel 0.15. Weight: .63 oz. (18 g) approximately. Expected Mechanical Life: 30 million operations. Ratings: Current: 8A 12A 16A Contact Life Voltage: 250VAC 250VAC 250VAC Power (breaking): 2,000VA 3,000VA 4,000VA Voltage (breaking): 400VAC 400VAC 400VAC Make Current: 16A 20A 25A Material: AgNi 0.15 AgCdO AgCdO Load/Life Type Load Life (Ops.) RP410 12A, 250VAC, cosϕ = 1, 1200/h, 40% duty cycle 110,000 RP410 9.1A, 220VAC, cosϕ = 1, 360/h, 15% duty cycle 200,000 RP418 3.4A ON, 0.42A OFF, 220VAC, cosϕ = 0.6 > 1.1 million RP411 8A, 250VAC, cosϕ = 1, 50% duty cycle 100,000 RP412 8A, 250VAC, cosϕ = 1, 50% duty cycle 100,000 RP330 18.2A, 250VAC, cosϕ = 1, 600/h, 15% duty cycle 110,000 RP330 96A ON, 16A OFF, 250VAC, cosϕ = 0.6, 450/h >30,000 Max. DC Load Breaking Capacity Initial Dielectric Strength Between Open Contacts: 1,000Vrms Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20°C Nominal Coil Power: 500mW. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in VoltageVoltageVoltageCurrent VDC Ohms VDC VDC VDC (mA) Coil Operating Range 5 54 ± 10% 3.5 0.5 9.0 92.6 6 68 ± 10% 4.2 0.6 10.8 88.2 12 270 ± 10% 8.4 1.2 21.6 44.4 24 1,100 ± 15% 16.8 2.4 43.2 21.8 48 4,400 ± 15% 33.6 4.8 86.4 10.9 60 6,540 ± 15% 42.0 6.0 108.0 9.2 110 23,100 ± 15% 77.0 11.0 198.0 4.8 Operate Data Nominal coil voltage (Un) Must Operate Voltage: See Coil Data table. Operate Time (typical): 8 ms. Release Time (typical): 2 ms. Bounce Time (typical): N/O: 2 ms; N/C: 4 ms. Switching Rate: 6.000 ops./hr. max. at rated load. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 484 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RP 4 1 0 012 1. Basic Series: RP = Printed circuit board relay. 2.Version: 3 = 16A, flux tight. 4 = 8/12A, flux-tight. 7 = 16A, sealed. 8 = 8/12A, sealed. 3. Contact Arrangement: 1 = 1 Form C (SPDT). 3 = 1 Form A (SPST-NO). 4. Contact Material and Pin Spacing: 0 = Silver-cadmium oxide, 16A or 12A, 5 mm pin spacing. 2 = Silver-nickel 0.15, 8A, 3.5 mm pin spacing. 1 = Silver-nickel 0.15, 8A, 5 mm pin spacing. 8 = Silver-cadmium oxide, 12A, 3.5 mm pin spacing. 5. Coil Voltage: 005 = 5VDC 012 = 12VDC 048 = 48VDC 110 = 110VDC 006 = 6VDC 024 = 24VDC 060 = 60VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) 1.14 .496 (29.0) (12.6) 1 Form C, 8/12A, 3.5 mm 1.00 (25.5) .130 (3.3) 1 Form A, 8/12A, 3.5 mm PC Board Layouts (Bottom Views) .098 - .1 GRID .051 + .004 DIA. (2.5 - 2.54) (1.3 + .1) 8/12A, 3.5 mm Pin Spacing .094 .138 .138 1 Form C, 8/12A, 5 mm (2.4) (3.5) (3.5) .098 - .1 GRID .051 + .004 DIA. (2.5 - 2.54) (1.3 + .1) 8/12A, 5 mm Pin Spacing .094 .138 .138 (2.4) (3.5) (3.5) 1 Form A, 8/12A, 5 mm .098 - .1 GRID .051 + .004 DIA. (2.5 - 2.54) (1.3 + .1) 16A, 5 mm Pin Spacing .094 .197 .197 (2.4) (5.0) (5.0) 1 Form C, 16A, 5 mm 1 Form A, 16A, 5 mm Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 485 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RP 3 SL series 16 Amp, 1 Pole PC Board Relay for High Inrush Loads File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data • 1 Form A (SPST-NO). Temperature Range: • 16 amp models handles up to 120A peak inrush current. Operating: -40°C to +70°C. • 4kV/8mm contact-to-coil. Vibration (30-300 Hz.): 20g. • Latching and non-latching types. Shock (destructive): 100g. Contact Data Arrangements: 1 Form A (SPST-NO), single contact. Mechanical Data Material: Silver-tim oxide. Termination: Printed circuit terminals. Expected Mechanical Life: 30 million operations. Enclosure: Flux-tight (RT II) plastic case or sealed (RT III) cover. Ratings: Weight: .63 oz. (18 g) approximately. Current: 16A Voltage: 250VAC Power (breaking): 4,000VA Contact Life Voltage (breaking): 440VAC Make Current (max 4s at 10% duty cycle): 25A Peak Inrush Current: 120A Load/Life 12A, 250VAC, cosϕ = 1; 300,000 ops. TV8; 25,000 ops. 2,500W, 230VAC, Halogen lamps; > 10,000 ops. 1,000W, 250VAC, Incandescent lamps; 230,000 ops. 3,000W, 250VAC, Incandescent lamps; 36,000 ops. 1,500VA, Fluorescent lamps, 163µF; 10,000 ops. Initial Dielectric Strength Between Open Contacts: 2,000Vrms Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20°C Max. DC Load Breaking Capacity Nominal Coil Power: Non-latching: 500mW. Single-coil latching: 1.2 - 1.4W. Dual-coil latching: 1.2 - 1.5W. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in VoltageVoltageVoltageCurrent VDC Ohms VDC VDC VDC (mA) Non-Latching Models 12 270 ± 10% 9.0 1.2 21.6 44.4 24 1,100 ± 15% 18.0 2.4 43.2 21.8 48 4,400 ± 15% 36.0 4.8 86.4 10.9 60 6,540 ± 15% 45.0 6.0 108.0 9.2 DC Must Nominal Nominal Resistance Operate Reset Reset Coil Voltage in VoltageVoltage R1 Current VDC Ohms VDC VDC Ohms / W (mA) Coil Operating Range Single-coil Latching Models – Reset Voltage 70-110% of Nom. 5 21 ± 10% 3.7 3.6 39 / 0.5 238.1 Non-latching 12 115 ± 10% 9.0 8.7 220 / 0.5 104.3 Latching version 24 460 ± 10% 18.0 16.7 820 / 0.5 52.2 Dual-coil Latching Models – Reset Voltage 75-120% of Nom. 12 105 ± 15% 9.0 9.0 – 114.3 24 460 ± 15% 18.0 18.0 – 52.2 Nominal coil voltage (Un) Operate Data Nom. coil V (Un) Must Operate Voltage: See Coil Data table. Operate / Release Time (Non-latching, typical): 8 ms / 2 ms. Operate / Reset Time (Latching, typical): 6 ms / 2 ms. Bounce Time (typical): 2 ms. Switching Rate: 6.000 ops./hr. max. at rated load. Latching Models Non-Latching Models Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 486 specified. Refer to inside back cover. Applied coil voltage (U/Un) Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RP 3 SL F12 1. Basic Series: RP = Printed circuit board relay. 2.Version: 3 = Flux tight. 7 = Sealed. 3. Contact Arrangement / Material: SL = 1 Form A (SPST-NO), Silver-tin oxide. 4. Coil Voltage: Non-Latching Models: 012 = 12VDC 024 = 24VDC 048 = 48VDC 060 = 60VDC Single-Coil Latching Models: A05 = 5VDC A12 = 12VDC A24 = 24VDC Dual-Coil Latching Models: F12 = 12VDC F24 = 24VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. TBD Outline Dimensions Wiring Diagram (Bottom View) 1.14 .496 (29.0) (12.6) Latching Versions: Contact position shown results during or after Coil energization 1.00 with reset voltage. (25.5) Two-Coil Versions: Operate: A2, A3 Reset A1, A3 .130 Terminal b) only present on (3.3) two-coil latching models PC Board Layout (Bottom View) Circuit Diagram for Single-Coil Latching Model .098 - .1 GRID .051 + .004 DIA. (2.5 - 2.54) (1.3 + .1) (b) .094 .197 (2.4) (5.0) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 487 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK 0409 series High Inrush (500A/10µs) Printed Circuit Board Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Latching Coil Data DC @ 20°C Features • 1 Form A (SPST-NO). Nominal Coil Power: Latching: 0.8 - 1W. • Tungsten prerun contact and silver-cadmium oxide contact. Minimum Energization Time: 20 ms. • 10 amp rated current, 500A/10µs inrush current. DC Must Min. Max. Nominal • 4kV/8mm contact-to-coil, insulation to VDE 0631 and 0700. Nominal Resistance Operate Reset Reset Coil • Non-latching and latching types. Voltage in Ohms Voltage Voltage Voltage Current • Well suited for lighting systems, motors, lamp loads. VDC ±10% VDC VDC VDC (mA) Contact Data 12 118 8.9 0.7 2.5 40.0 24 457 18.0 1.3 5.0 20.0 Arrangements: 1 Form A (SPST-NO), single contact. Material: Tungsten prerun contact and silver-cadmium oxide contact. Expected Mechanical Life: 30 million operations. Operate Data Ratings: Must Operate Voltage: See Coil Data table. Current: 10A. Operate Time /Release Time (typical): 10 ms / 3ms. Current (making, max. 4s at 10% duty cycle): 16A. Bounce Time (typical): 3 ms. Current (peak inrush 10µs): 500A. Switching Rate: 9,000 ops./hr. max. at rated load. Voltage: 250VAC. Voltage (breaking): 400VAC. Load/Life Environmental Data 10 amp resistive, 250VAC; 250,000 ops. Temperature Range: Operating: -20°C to +70°C. 2,500W, incandescent lamps; 30,000 ops. Vibration (30-300 Hz.): 20g. 1,300W, fluorescent lamps (140µF); 30,000 ops. Shock (destructive): 100g. 1,000W, Dulux lamps (140µF); 30,000 ops. Mechanical Data Initial Dielectric Strength Between Open Contacts: 1,000Vrms. Termination: Printed circuit terminals. Enclosure (94 V-0 rated): Flux-tight (RTII) plastic case. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Weight: 0.35 oz. (10 g) approximately. Coil Operating Range Non-Latching Coil Data DC @ 20°C Nominal Coil Power: Non-latching: 820mW. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in Ohms Voltage Voltage Voltage Current VDC ±10% VDC VDC VDC (mA) 6 80 4.2 0.4 12.0 75.0 Nominal coil voltage (Un) 12 300 8.4 0.9 24.0 40.0 24 1,200 16.8 1.8 48.0 20.0 48 4,825 33.6 3.6 96.0 10.0 60 7,500 42.0 4.5 120.0 8.0 Ordering Information Typical Part Number B 0409 47 031 001 1. Basic Series: 0409 = Miniature printed circuit board relay for high inrush currents. 2.Type: 47 = Non-latching 67 = Latching 3. Coil Voltage: Non latching Coil: 031 = 12VDC 027 = 24VDC 024 = 48VDC 023 = 60VDC Latching Coil: 032 = 12VDC 029 = 24VDC 4. Contact Configuration: 001 = 1 Form A (SPST-NO) Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions PC Board Layout (Bottom View) Wiring Diagram (Bottom View) 1.12� .48� .098 GRID (28.5) (12.2) .051 – .004 DIA. (2.5) (1.3 – .1) .996� (25.3) .138� (3.5) .090 (2.3) .157 + .02� (4 + .5) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 488 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK V23077 (IF) series 16 Amp, Miniature Printed Circuit Board Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data • 1 Form A (SPST-NO) and 1 Form B (SPST-NC). Termination: Printed circuit terminals, plus quick connects for load. • 16 amp rated current. Enclosure (94 V-0 rated): Flux-tight (RTII) plastic case. • Quick connect terminals for load. Weight: 0.92 oz. (26 g) approximately. • Ambient temperature up tp 125°C. • 4kV/8mm contact-to-coil, insulation to VDE 0631 and 0700. • Flux-tight plastic case. Contact Life Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form B (SPST-NC), single contact. Material: Silver-cadmium oxide. Expected Mechanical Life: 30 million operations. Ratings: Current: 16A. Voltage: 250VAC. Power (breaking): 4,000 VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): 25A. 1 Form A Contacts 10 amp resistive, 400VAC, 125°C, 200,000 ops. 16 amp resistive, 250VAC, 125°C, 100,000 ops. 1 Form B Contacts 10 amp resistive, 400VAC, 125°C, 50,000 ops. 16 amp resistive, 250VAC, 125°C, 50,000 ops. Initial Dielectric Strength Max. DC Load Breaking Capacity Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20°C Nominal Coil Power: 360mW. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in Ohms Voltage Voltage Voltage Current VDC ±10% VDC VDC VDC (mA) 6 100 3.8 0.6 16.9 60.0 12 400 7.5 1.2 33.8 30.0 24 1,600 14.9 2.4 67.7 15.0 48 6,400 30.0 4.8 135.3 7.5 Coil Operating Range Operate Data Must Operate Voltage: See Coil Data table. Operate Time: 10 ms. Release Time: 2 ms. Bounce Time (N/O contact / N/C contact) : 1 ms / 2 ms. Switching Rate: 3,600 ops./hr. max. at rated load. Nominal coil voltage (Un) Environmental Data Temperature Range: Operating: -40°C to +125°C. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 489 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B V23077 -A 1 005 -A 4 03 1. Basic Series: V23077 = IF 125°C miniature printed circuit board relay.. 2.Termination: A = PC terminals for coil, .25” (6.35mm) quick connects for load. 3.Version: 1 = Standard. 4. Coil Voltage: 003 = 6VDC 005 = 12VDC 007 = 24VDC 009 = 48VDC 5. Contact Type: A = Single contact. 6. Contact Material: 4 = Silver-cadmium oxide. 7. Contact Arrangement: 02 = 1 Form A (SPST-NO). 03 = 1 Form B (SPST-NC). Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) 1.14 .520 .248 x .031 (13.2) (29) (6.3 x .8) .248 (6.3) 1.14 1 Form A (29) .59 (15) .098 1 Form C (2.5) 1.594 .167 ± .001 (40.5) (4.25 ± .25) PC Board Layout (Bottom View) .051 .098 GRID + .004 DIA. (2.5) (1.3 + .1) .098 (2.5) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 490 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK 0410 series 16 Amp, Miniature Printed Circuit Board Relay File E214025 NOTE: 0410 83 version is VDE only, not UL, CSA or SEMCO. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data • 1 Form A (SPST-NO), 1 Form B (SPST-NC) and 1 Form X (SPST-NO-DM). Temperature Range: • 16 amp rated current. Operating: 410 63: -20°C to +125°C; 410 83: -20°C to +85°C. • Quick connect terminals for load. Vibration: (10 to 500 Hz.) 10g [410 83]. • 410 63 types operate in ambient temperature up to 125°C. Shock (functional): 100g [410 83]. • 4kV/8mm contact-to-coil, insulation to VDE 0631 and 0700. • 410 83 version provides 3 mm contact gap. • Flux-tight plastic case. Mechanical Data Contact Data Termination: Printed circuit terminals, plus quick connects for load. Enclosure (94 V-0 rated): Flux-tight (RTII) plastic case. Arrangements: Weight: 0.85 oz. (24 g) approximately. 410 63: 1 Form A (SPST-NO) and 1 Form B (SPST-NC), single contact. 410 83: 1 Form X (SPST-NO-DM). Material: 410 63: Silver-cadmium oxide.; 410 83: Silver-nickel. Contact Life Expected Mechanical Life: 10 million operations. Ratings: Current: 16A. Voltage: 250VAC. Power (breaking): 4,000 VA. Voltage (breaking): 440VAC. Current (making, max. 4s at 10% duty cycle): 410 63: 25A.; 410 83: 20A. 410 63 – 1 Form A Contacts 16 amp resistive, 250VAC, 125°C, 100,000 ops. 12 amp resistive, 250VAC, 70°C, 450,000 ops. 10 amp resistive, 400VAC, 125°C, 50,000 ops. 12 amp cosϕ = 0.6, 250VAC, 125°C, 50,000 ops. 410 63 – 1 Form B Contacts 410 63 Type 410 83 Type 16 amp resistive, 250VAC, 125°C, 150,000 ops. 1 Form A or 1 Form C 1 Form X, 3 mm Contact Gap 410 83 – 1 Form X Contacts 16 amp resistive, 250VAC, 85°C, 30,000 ops. 10 amp resistive, 250VAC, 85°C, 100,000 ops. 10 amp resistive, 400VAC, 85°C, 10,000 ops. Max. DC Load Breaking Capacity Initial Dielectric Strength Between Open Contacts: 410 63: 1,000Vrms.; 410 83: 2,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20°C Nominal Coil Power: 360mW. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Voltage in Ohms Voltage Voltage Voltage Current 410 63 Type VDC ±10% VDC VDC VDC (mA) 1 Form A or 1 Form C 410 63 models (1 Form A or 1 Form B) 6 100 3.8 0.6 16.9 60.0 12 400 7.5 1.2 33.8 30.0 Coil Operating Range 24 1,600 14.9 2.4 67.7 15.0 48 6,400 30.0 4.8 135.3 7.5 410 83 models (1 Form X with 3 mm contact gap) 6 100 3.6 0.45 16.9 60.0 12 400 7.3 0.9 33.8 30.0 24 1,600 14.6 1.8 67.7 15.0 48 6,400 29.2 3.6 135.3 7.5 60 10,000 36.5 4.5 135.3 6.0 Nominal coil voltage (Un) Nominal coil voltage (Un) Operate Data Must Operate Voltage: See Coil Data table. Operate Time (typical): 410 63: 10ms.; 410 83: 14 ms. Release Time (typical): 5 ms. 410 63 Type 410 83 Type Bounce Time (typical): 3 ms. 1 Form A or 1 Form C 1 Form X, 3 mm Contact Gap Switching Rate: 6,000 ops./hr. max. at rated load. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 491 specified. Refer to inside back cover. Applied coil voltage (U/Un) Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B 0410 83 046 001 1. Basic Series: 0410 = Miniature printed circuit board relay with quick connect terminals for load. 2.Version: 63 = Model for ambient temperature up to 125°C. 83 = Model with 3 mm contact gap, for ambient temperature up to 85°C 3. Coil Voltage: 054 = 6VDC 050 = 12VDC 046 = 24VDC 043 = 48VDC 042 = 60VDC (Note: 60VDC coil is not available with version 63) 4. Contact Arrangement: 01 = 1 Form A (SPST-NO) on version 63; 1 Form X (SPST-NO-DM) on version 83. 02 = 1 Form B (SPST-NC), not available on version 83. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) 1.24 MAX .492 MAX .248 x .031 (31.5) (12.5) 1.14 (6.3 x .8) (29) .248 1.12 MAX .697 410 63, 1 Form A (28.5) (17.7) (6.3) .59 (15) .098 410 63, 1 Form B (2.5) .295 ± .008 1.594 MAX .157 ± .02 (7.5 ± .2) (40.5) (4 ± .5) 410 83, 1 Form X PC Board Layout (Bottom View) .098 GRID .051 + .004 DIA. (1.3 + .1) (2.5) .098 (2.5) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 492 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCG series 2 Pole Miniature Power PC Board Relay Appliances, Audio Equipment, Office Machines UL File No. E82292 CSA File No. LR48471 SEMKO File No. 8744066 SEV File No. 98110096 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features PCG • Meet UL Tungsten TV-5 rating. • 2 Form A contact arrangements. Rated Coil Nominal Coil Must Operate Must Release • Meet UL, CSA, SEMKO and SEV requirements. Voltage Current Resistance Voltage Voltage • Meet 4,000V dielectric voltage between coil and contacts. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Meet 10,000V surge voltage between coil and contacts (1.2 / 50μs). 5 106.4 47 4.00 0.25 6 88.0 68 4.80 0.30 9 58.0 155 7.20 0.45 12 44.4 270 9.60 0.60 Contact Data @ 20°C 24 21.8 1,100 19.20 1.20 Arrangements: 2 Form A (DPST-NO). 48 11.0 4,400 38.40 2.40 Material: AgSnO. Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data Must Operate Voltage: 80% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Operate Time:15 ms max. Release Time: 5 ms max. Contact Ratings Ratings: 5A @ 250VAC resistive, 100,000ops. 8A @ 250VDC resistive, 50,000ops. TV-5 @ 120VAC Tungsten, 25,000ops. Max. Switched Voltage: AC: 277V. DC: 30V. Environmental Data Max. Switched Current: 10A. Temperature Range: Max. Switched Power: 1,250VA, 380W. Operating:-30°C to +70°C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Operational: 10 to 55 Hz., 1.5mm double amplitude. 2 Shock, Mechanical: 1,000m/s (100G approximately). 2 Initial Dielectric Strength Operational: 100m/s (10G approximately). Operating Humidity: 20 to 85% RH. (Non-condensing). Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). Between Coil and Contacts: 4,000VAC 50/60 Hz. (1 minute). Surge Voltage Between Coil and Contacts: 10,000V (1.2 / 50μs). Surge Voltage Between Contact and other Pole: 6,000V (1.2 / 50μs). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM. Mechanical Data Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): PCG-N: Vented (Flux-tight) snap-on cover. Coil Data Weight: 0.63 oz (18g) approximately. Voltage: 5 to 48VDC. Nominal Power: 540 mW Coil Temperature Rise: 50°C max., at rated coil voltage. Max. Coil Power: 130% of nominal. Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 493 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B PCG -2 24 D 2 M N ,000 1. Basic Series: PCG = Miniature Power PC board relay. 2. Termination: 2 = 2 pole. 3. Coil Voltage: 05 = 5VDC 09 = 9VDC 24 = 24VDC 06 = 6VDC 12 = 12VDC 48 = 48VDC 4. Coil Input: D = Standard 5. Contact Material: 2 = AgSnO 6. Contact Arrangement: M = 2 Form A, DPST-NO. 7. Contact Rating: N = Vented (Flux-tight)* snap-on cover. 8. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) .98 ± .012 (24.9 ± .3) .157 ± .012 (4.0 ± .3) .012 .012 .039 .039 .016 (.3) (.3) (1.0) (1.0) (.4) 1.11 ± .012 PC Board Layout (Bottom View) (28.2 ± .3) .039 (1.0) .031 2 – .039 DIA 4 – .051 DIA (.8) (1.0) (1.3) .559 ± .012 (14.2 ± .3) .315 ± .004 .295 ± .012 .295 ± .004 .315 ± .012 (8.0 ± .1) (7.5 ± .3) (7.5 ± .1) (8.0 ± .3) .687 ± .004 .303 ± .004 .303 ± .012 (17.45 ± .1) (7.7 ± .1) (7.7 ± .3) .687 ± .012 .065 (17.45 ± .3) (1.65) Reference Data Coil Temperature Rise Operate Time Life Expectancy 12 60 100 250VAC Resistive 50 10 Operate Time 40 8 8A 30 6 10 20 4 2 10 Release Time 1 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1 8 0 2 345 6 7 910 Coil Power (W) Coil Power (W) Contact Current (A) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 494 specified. Refer to inside back cover. Temp. Rise (°C) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 SCHRACK 0430 series 10-16 Amp, 1 or 2 Pole PC Board or Panel Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • 1 Form A (SPST-NO) through 2 Form C (DPDT). Must Operate Voltage: See Coil Data table. • 16 amp rated current (1 pole) or 10 amp (2 pole). Operate Time (typical): Standard Contact Gap: 18 ms. • Printed circuit or quick connect terminals. 3mm Contact Gap: 15 ms. • 4kV/8mm contact-to-coil. Release Time (typical): Standard Contact Gap: 3 ms. • 3 mm contact gap version available. 3mm Contact Gap: 8 ms. • Optional magnetic blowout on 3mm contact gap version. Bounce Time (typical): Standard Contact Gap: 3 ms. • PC board, bracket or panel mount. 3mm Contact Gap: 4 ms. Switching Rate: 9,000 ops./hr. max. at rated load. Contact Data Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC), 1 Form C (SPDT), 2 Form A (DPST-NO), 2 Form B (DPST-NC), 2 Form C (DPDT). Material: Silver-cadmium oxide or silver-copper 3. Environmental Data Expected Mechanical Life: 250,000 operations. Temperature Range: Ratings: Operating: 410 63: -20°C to +70°C. Current: One pole: 16A; Two pole: 10A. Shock (destructive): 100g. Voltage: 250VAC. Power (breaking): One pole: 4,000 VA; Two pole: 2,500VA. Voltage (breaking): 400VAC. Current (making, max. 4s at 10% duty cycle): One pole: 25A; Two pole: 15A. Load/Life – One Pole – Model with Standard Contact Gap Mechanical Data 16 amp resistive, 250VAC, 250,000 ops. Termination: Printed circuit or quick connect terminals. Load/Life – One Pole – Model with 3mm Contact Gap Enclosure: Plastic dust cover. 16 amp resistive, 250VAC, 70°C, 150,000 ops. Weight: 1.13 oz. (32 g) approximately. 10 amp resistive, 250VAC, 105°C, 150,000 ops. Load/Life – Two Pole 10 amp resistive, 250VAC, 250,000 ops. Contact Life Initial Dielectric Strength Between Open Contacts: Standard Contact Gap: 1,000Vrms 3mm Contact Gap: 2,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20°C Nominal Coil Power: DC Coil : 1W.; AC Coil: 1.8VA DC Must Nominal Models with Std. Contact Gap Models with 3mm Contact Gap Nominal Resistance Operate Drop-out Maximum Coil Voltage in Ohms Voltage Voltage Voltage Current VDC ±10% VDC VDC VDC (mA) DC Coils Max. DC Load Breaking Capacity 12 145 7.8 0.6 15.6 83.0 24 580 15.6 1.2 31.2 41.0 with� blowout� 48 2,200 31.2 2.4 62.4 22.0 magnet� 110 13,000 71.5 5.5 143.0 9.0 AC Coils – Models with Standard Contact Gap 24 200 18.0 3.6 27.0 75.0 60 1,250 45.0 9.0 69.0 30.0 110 4,500 83.0 16.0 127.0 16.0 230 17,500 170.0 35.0 253.0 10.0 AC Coils – Models with 3mm Contact Gap 24 145 18.0 3.6 27.0 75.0 60 950 45.0 9.0 69.0 30.0 110 3,100 83.0 16.0 127.0 16.0 230 11,400 170.0 35.0 253.0 9.0 Models with Std. Contact Gap Models with 3mm Contact Gap Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 495 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B 0430 1 6 10 1 100 1. Basic Series: 0430 = Miniature printed circuit board or panel mount relay. 2. Mounting: 0 = PC board 1 = Mounting brackets 2 = Snap mounting 5 = DIN rail mounting 3.Version: 4 = 1 pole, 3mm gap. 5 = 1 pole, 3mm gap, magnetic blowout. 6 = 1 pole, Std. gap. 7 = 2 pole, Std. gap. 4. Coil Voltage: DC Coils for all Types: 09 = 12VDC 10 = 24VDC 11 = 48VDC 13 = 110VDC AC Coils for Std. Gap Types: 03 = 24VAC 05 = 60VAC 06 = 110VAC 07 = 230VAC AC Coils for 3 mm Gap Types: 23 = 24VAC 25 = 60VAC 26 = 110VAC 27 = 230VAC 5. Contact Material: 0 = Silver-copper 3 1 = Silver-cadmium oxide. 6. Contact Arrangement: 100 = 1 Form A (SPST-NO) 200 = 1 Form B (SPST-NC) 300 = 1 Form C (SPDT). 400 = 2 Form A (DPST-NO) 500 = 2 Form B (DPST-NC) 600 = 2 Form C (DPDT). Note: 2 pole forms not available with 3mm contact gap. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions .646 1.40 1.40 (16.4) (35.5) (35.5) .354 (9.0) 1.10 (28) 1.10 (28) .157 .984 .984 (25) (4.0) (25) .165 (4.2) PC Board Version, Std. Gap. .472 1.65 .126 .126 (12) (42) (3.2) (3.2) 1.40 1.48 – .004 (35.5) .130 + .004 (37.7 – .1) .079 + .004 (3.3 + .1) (2 + .1) 1.10 .138 + .004 (28) (12.1 + .1) Mounting Bracket Versions .126 .40 .157 (3.2) (1.0) (4.0) PC Board Version, 3mm Gap Snap Mount Version Wiring Diagrams (Bottom Views) PC Board Layouts (Bottom Views) .098 GRID .051 + .004 DIA. (1.3 + .1) (2.5) 1 Form A, Standard Contact Gap 1 Form A, Standard Contact Gap .063 .177 (1.6) (4.5) .051 + .004 DIA. .098 GRID (1.3 + .1) (2.5) 1 Form A, 3mm Contact Gap 1 Form A, 3mm Contact Gap .063 .177 (1.6) (4.5) .051 + .004 DIA. .098 GRID (2.5) (1.3 + .1) 2 Form A, Standard Contact Gap 2 Form A, Standard Contact Gap .063 .177 (1.6) (4.5) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 496 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 600 series 15 Amp Sensitive PC Board Relay File E39006 and E42149 File LR48569 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Dielectric Strength • Low power sensitive coil. Between Open Contacts: 500VAC, 60 Hz., 2 seconds. • 1 Form A, 1 Form B and 1 Form C contact arrangements. Between Coil and Contacts: 1,000VAC, 60 Hz., 2 seconds. • Various contact materials and types for ratings to 15 amps. • Coil assembly rated 130°C, 94V-O. • Applications include sensor and timer controls, emergency lighting, instr- mentation, alarm systems, smoke and fire detectors, business equipment and vending machines. Coil Data @ 25°C Rated Voltage: 3 to 48VDC. Contact Data Maximum Voltage @ 85°C: 120% of Rated Voltage. Nominal Power @ 25°C: 110mW for 3A and 5A rated models; Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC) and 1 Form C 240mW for 15A rated models. (SPDT). Maximum Power @ 25°C: 1W. Material and Type: Gold-silver crossbar, silver-cadmium crossbar, palladi- Duty Cycle: Continuous. um crossbar, gold-flashed silver cadmium, silver sadmium oxide, find silver, Initial Insulation Resistance: 10,000 megohms, min., at 25°C, 500VDC gold-flashed coin silver. and 50% rel. humidity. Expected Mechanical Life: 10 million operations, minimum. Expected Electrical Life: 100,000 operations, minimum, at rated load. UL/CSA Ratings @ 25°C Coil Data @ 25°C Code Contact Material Rating DC Resistance in Ohms Must Must B Au Flashed AgCd 75VA@24VAC Pilot Duty§ Nominal ±10% Operate Release 1A@120VAC General Purpose Voltage Voltage Voltage 1.5A@50VDC Resistive VDC 3 A & 5A Types 15A Types VDC VDC 600W@277VAC Gen’l. Purpose SPST-NO Only 003 82 38 2.25 0.3 240W@277VAC Gen’l. Purpose SPST-NC Only 006 327 150 4.5 0.6 480VA@277VAC Pilot Duty SPDT Only 009 736 338 6.75 0.9 480VA@Ballast SPDT Only 012 1,309 600 9.0 1.2 1/10 HP@120VAC 018 2,945 1,350 13.5 1.8 G Au Ag 3A@28VDC Resistive 024 5,236 2,400 18.0 2.4 125VA@120VAC Pilot Duty§ 028 7,127 3,267 21.0 2.8 1/8 HP@120/240 VAC 048 20,945 9,600 36.0 4.8 H AgCdO 15A@150VAC Inductive 0.4 PF NO Only 10A@277VAC Resistive 15A@28VDC Resistive Operate Data @ 25°C TV5@NO Contacts Must Operate Voltage: 75% of nominal. TV2@NC Contacts Must Release Voltage: 10% of nominal. 600W@277VAC Tungsten SPDT-NO Only Operate Time: 10 ms, typ. 240W@277VAC Tungsten SPDT-NC Only Release Time: 10 ms, typ. 480VA@277VAC Pilot Duty SPDT Only § 480VA@277VAC Ballast SPDT Only 1/3 HP@120/240VAC NO 1/6 HP@120/240VAC NC K Au Flashed Coin Ag 5A@240VAC Resistive 5A@28VDC Environmental Data 125VA@240VAC Pilot Duty § Temperature Range: 125VA@125VAC Pilot Duty § Storage: -55°C to +85°C. R Fine Ag 15A@150VAC Resistive Operating: -55°C to +85°C. 15A@28VDC Resistive 10A@277VAC Resistive 480VA@240VAC Pilot Duty TV2@NC Contacts TV4@NO Contacts 480W@120VAC Tungsten NO 240W@120VAC Tungsten NC S Ag Cd 3A@240VAC Resistive Mechanical Data 3A@28VDC Resistive Termination: Printed circuit terminals. V Palladium 2A@28VDC Resistive Enclosures: Unsealed dust cover or sealed plastic case. Weight: 1.6 oz. (45g) approximately. § Only when Code Y Electrical Spacing is specified. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 497 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B 60 3 – 24 V Y Q 1. Basic Series Type: 60 = Miniature, PC board relay rated 3A or 5A (Contact Material Code G, S, V or B only) 61 = Miniature, PC board relay rated 15A (Contact Material Code H or R only) 65 = Miniature, PC board relay rated 5A (Contact Material Code K only) 2. Contact Arrangement: 1 = 1 Form A (SPST-NO) 2 = 1 Form B (SPST-NC) 3 = 1 Form C (SPDT) 3. Coil Voltage: 003 = 3VDC 009 = 9VDC 018 = 18VDC 028 = 28VDC 006 = 6VDC 012 = 12VDC 024 = 24VDC 048 = 48VDC 4. Contact Material: G = Au Ag crossbar, rated 3A (Only available with Basic Series Type 60). S = Au Cd crossbar, rated 3A (Only available with Basic Series Type 60). V = Pd crossbar, rated 3A (Only available with Basic Series Type 60). B = Au-flashed AgCd crossbar, rated 5A (Only available with Basic Series Type 60). H = AgCdO, rated 15A (Only available with Basic Series Type 61). R = Fine Ag, rated 15A (Only available with Basic Series Type 61). K = Au-flashed coin Ag, rated 5A (Only available with Basic Series Type 65). 5. Electrical Spacing: Leave Blank = 0.125 in (3.175 mm) Clearance and 0.125 in (3.175 mm) Creepage Y = 0.125 in (3.175 mm) Clearance and 0.250 in (6.35 mm) Creepage 6. Enclosure Type Leave Blank = Unsealed dust cover Q = Sealed cover Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions .775 MAX. 1.250 MAX. (19.69) (31.75) 1.200 MAX. (30.48) .240 (6.1) PC Board Layout (Bottom View) Wiring Diagrams (Bottom Views) 1 Form B 1 Form C 1 Form A .546 (SPST-NC) (SPDT) (SPST-NO) (13.9) .273 (6.93) .067 DIA. TYP. .313 (1.70) (7.95) .843 (21.4) .297 (7.54) .594 (15.1) Note: On single throw models, only necessary terminals are present. Note: On single throw models, only necessary terminals are present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 498 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 POWER PC BOARD RELAYS Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 491 ................ 20A AC Coil PCB or Panel Mt. Relay ............. 509 PCF ................ 25A DC Coil PCB Relay ................................. 502 T9A ................ 30A DC Coil PCB or Panel Mt. Relay ............. 506 T90 ................ 30A DC Coil PCB Relay ................................. 504 Transformers.............................. 201-212 2 T92 ................ 30A AC or DC Coil PCB or Panel Mt. Relay ... 511 NOTE: Some of the relay series described in the Power Relays and Contactors section are also available with printed Low-signal PC Board Relays. 301-336 circuit board terminals as an option. 3 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ........ 501-512 5 Relays with 6 Forcibly-Guided Contacts.............. 36-79 Plug-in/Panel Mount Power (20-30A) PC Board Relay Question Tree 7 General Purpose Relays............701-749 This guide helps the user select one or more relay series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, Power Relays & Definite the user must assume ultimate responsibility for determining the suitability of a relay for a particular application. 8 Purpose Contactors...................... 89-131 Mounting and Termination? Latching, Impulse & 9 Rotary Relays ...............................149-154 PCB Panel PCB + QC Only Mount Terminals Automotive Relays................ 1001-1025 10 AC or DC AC or DC AC or DC Coil? Coil? Coil? Solid State Relays & 11 Input/Output Modules ................195-207 AC DC AC DC AC DC Coil Coil Coil Coil Coil Coil Time Delay Relays & 12 Counters ........................................208-232 Number Number Number Number Number Number of Poles? of Poles? of Poles? of Poles? of Poles? of Poles? Sensors & Monitors ...................233-234 One Two One Two One Two One Two One Two One Two + 13 Pole Poles Pole Poles Pole Poles Pole Poles Pole Poles Pole Poles None T92 T90 T92 491 T92 T9A T92 491 None PCF None High Performance Relays T9A T90 T9A and Contactors (overview) ....... 233-234 14 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 501 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCF series 25A Miniature Power PC Board Relay Appliances, HVAC, Office Machines. UL File No. E58304 CSA File No. LR48471 TUV File No. R9551880 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features • Meet UL 508, CSA, TUV requirements. PCF / PCFN • 1 Form A contact arrangements. Rated Coil Nominal Coil Must Operate Must Release • Quick connect terminal type and PC board type. Voltage Current Resistance Voltage Voltage • Meet 5,000V dielectric voltage between coil and contacts. (VDC) (mA) (ohms) ± 10% (VDC) (VDC) • Meet 10,000V surge voltage between coil and contacts (1.2 / 50μs). 06 150.0 40 4.50 0.30 09 100.0 90 6.75 0.45 12 75.0 160 9.00 0.60 24 37.5 640 18.00 1.20 Contact Data @ 20°C Arrangements: 1 Form A. Material: AgSnO Max. Switching Rate: 300 ops./min. (no load). 30 ops./min. (rated load). Expected Mechanical Life: 10 million operations (no load). Expected Electrical Life: 100,000 operations (rated load). Minimum Load: 100mA @ 5VDC. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. Operate Data Must Operate Voltage: 75% of nominal voltage or less. Must Release Voltage: 5% of nominal voltage or more. Contact Ratings Operate Time: 20 ms max. Release Time: 10 ms max. Ratings: 25A @ 250VAC resistive. 23A @ 277VAC resistive. 20A @ 250VAC inductive (cosş= 0.4). Max. Switched Voltage: AC: 250V. Max. Switched Current: 25A. Max. Switched Power: 6,370VA. Environmental Data Temperature Range: Operating: -30°C to +55°C Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude Initial Dielectric Strength Operational: 10 to 55 Hz., 1.5mm double amplitude. Between Open Contacts: 1,000VAC 50/60 Hz. (1 minute). 2 Shock, Mechanical: 1,000m/s (100G approximately). Between Coil and Contacts: 5,000VAC 50/60 Hz. (1 minute). 2 Operational: 100m/s (10G approximately). Surge Voltage Between Coil and Contacts: 8,000V (1.2 / 50μs). Operating Humidity: 20 to 85% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDC. Coil Data Mechanical Data Voltage: 6 to 24VDC. Termination PCF : Printed circuit terminals with quick connect terminals. Nominal Power: 900 mW. PCFN : Printed circuit terminals. Coil Temperature Rise: 55°C max., at rated coil voltage. Enclosure (94V-0 Flammability Ratings): Max. Coil Power: 130% of nominal. PCF / PCFN: Vented (Flux-tight) plastic cover. Duty Cycle: Continuous. Weight: 0.99 oz (28g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 502 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B PCFN -1 24 D 2 M ,000 1. Basic Series: PCFN = 25A PC Board Terminals PCF = Quick Connect Terminals 2. Enclosure: 1 = 1 pole 3. Coil Voltage: 06 = 6VDC 09 = 9VDC 12 = 12VDC 18 = 18VDC 24 = 24VDC 4. Coil Input: D = Standard 5. Contact Material: 2 = AgSnO 6. Contact Arrangement: M = 1 Form A, SPST-NO 7. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram Outline Dimensions .630 ± .02 (16.0 ± .5) PCF (Top View) .472 ± .008 (12.0 ± .2) 1.20 ± .02 (30.4 ± .5) .464 ± .008 PCFN (11.8 ± .2) .331 (Bottom View) .031 (8.40) .25 (.8) PCF (6.35) .394 ± .008 .069 DIA (10.0 ± .2) (1.75) .079 (2.0) 1.04 ± .02 (26.5 ± .5) PC Board Layout (Bottom View) .031 .059 .063 .012 (.8) (1.50) (1.60) (.3) 2 – .071 DIA 1.09 ± .008 .157 ± .012 (1.8) (27.6 ± .2) (4.0 ± .3) .244 PCFN (6.2) .472 ± .008 .228 (12.0 ± .2) (5.8) 1.04 ± .02 (26.5 ± .5) .472 .394 2 – .063 DIA (12.0) (10.0) (1.6) .059 .031 .012 .063 (1.50) (.8) (.3) (1.60) 1.09 ± .008 .157 ± .012 (27.6 ± .2) (4.0 ± .3) .472 ± .008 (12.0 ± .2) .866 ± .008 (22.0 ± .2) Reference Data Coil Temperature Rise Operate Time Life Expectancy 24 100 60 250VAC Resistive 20 50 40 16 25A Operate Time 20A 30 10 12 20 8 0A 4 10 Release Time 1 0.4 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.2 0.6 0.8 1.0 1.2 1.4 2 461 8 102 14 16 18 20 22 24 26 Coil Power (W) Coil Power (W) Contact Current (A) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 503 specified. Refer to inside back cover. Temp. Rise (°C) Time (msec) 4 Operation (x 10 ) Catalog 1308242 Issued 3-03 P&B T90 series 30 Amp Printed Circuit Board Relay File E22575 File LR15734 Patented Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Typical Coil Temperature Rise • Up to 30A switching in SPST and 20A switching in SPDT arrangements. Data below are average values and should be verified in application. Tests • Silver cadmium oxide contacts. were conducted within a 2’ (.6 m) cube (still air) with relay mounted to a (6) • Available as an open-frame relay, with a snap-on dust cover or with an 30A, single side P.C. board ; at nominal coil power @ 25°C; with normally (6) immersion cleanable , plastic sealed case. open contact loaded; and with 4’ (1.22 m) long, #10 AWG load wires. • Meets UL 508 & UL 873 spacing – 1/8” through air, 1/8” over surface. 130 (1/4” over surface with terminal code 4) Open Style Relay, No Dust Cover 120 • UL class F insulation standard. 110 • Well suited for various industrial, commercial and residential applications, 100 as well as many others. 90 80 Contact Ratings @ 25°C 70 Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). 30A Load 60 Material: Silver-cadmium oxide. 50 25A Load Mechanical Life: 10 million operations, typical. 20A Load 40 15A Load 30 10A Load Contact Ratings @ 25°C with relay properly vented. Remove vent 0A Load 20 nib after soldering and cleaning. 50 75 100 125 150 175 200 225 Typical Electrical Load & Life (Open Style Relay) Applied Continuous Coil Voltage (% of Rated Voltage) Form & Contact Material Contact Load Type of Load Ops 150 (3) (1) Silver-cadmium 30A @ 240VAC UL General Purpose 100,000 Sealed Relay, Vented 140 oxide 20A @ 240VAC Resistive Heater 100,000 130 120 (5) Silver-cadmium 20A/10A @ 240VAC UL General Purpose 100,000 110 oxide 20A/10A @ 28VDC Resistive 100,000 100 90 Minimum Contact Load: 80 Silver Contacts: 500mA @ 5VDC or 12VAC. Silver Cadmium Oxide Contacts: 1A @ 5VDC or 12VAC. 70 30A Load 60 Initial Contact Resistance: 75 mΩ, max., @ min. rated current (switched). 25A Load 50 20A Load 40 15A Load Initial Dielectric Strength 10A Load 30 0A Load Between Open Contacts: 1,500V rms. 20 Between Contacts and Coil: 1,500V rms ( terminal code 1). 50 75 100 125 150 175 200 225 2,500V rms (UL 873 version terminal code 4). Applied Continuous Coil Voltage (% of Rated Voltage) Environmental Data Initial Insulation Resistance Storage Temperature Range: -40°C to 130°C. 9 Between Mutually Insulated Elements: 10 ohms, min., @ 500VDC, (1) Operating Temperature Range: -55°C to +85°C . 25°C and 50% R.H. Vibration, Operational: 0.065” (1.65mm) max. excursions from 10-55 Hz. with no contact opening >100μs. Coil Data @ 25°C Shock, Operational: 10g for 11 ms with no contact opening >100μs. Voltage: 5 to 110VDC. Shock, Mechanical: 100g. Maximum Coil Power: 2.8 Watt (5) Maximum Coil Temperature : Class F: 155°C. Mechanical Data Duty Cycle: Continuous. (4) Termination: Printed circuit terminals . Enclosures (all have 94V-0 flammability rating, Class F temp. rating): Coil Data Optional dust cover:Snap-on plastic dust cover is available for use on Nominal Voltage Resistance Nominal Power Nominal Current open style T90N. (VDC) ± 10% (Ohms) (mW) (mA) (2) Sealed case (T90S): Immersion cleanable, sealed plastic case . Weight: Open Model T90N: 0.7 oz. (20g) approximately. 5 27 930 185 6 40 900 150 Sealed Model T90S: 0.9 oz. (26g) approximately. 9 97 840 93 Notes 12 155 930 77 15 256 880 59 (1) Operating ambient temperature must consider “Must Operate Voltage Change 18 380 850 47 Over Temperature,” Contact Temperature Rise, Coil Temperature Rise (If coil 24 660 870 36 is not allowed to cool) and Maximum Coil Temperature. Specification ambient 48 2,560 900 19 considers nominal coil voltage, 20A load with coil cooled to ambient. 110 13,450 900 8 (2) Sealed relay terminals should not be bent. (3) Knock-off nib should be removed after cleaning process for optimum life of sealed relays. Operate Data @ 25°C (4) Maximum soldering temperature is 500°F for 4 seconds. Must Operate Voltage: 75% of nominal voltage or less. (5) Class F coils are UL systems approved for maximum coil temperature of Must Release Voltage: 10% of nominal voltage or more. 155°C by change of resistance method. Operate Time (Including Bounce)†: 15 ms, max. (6) See application note 13C265 for proper relay mounting, termination, cleaning Release Time (Including Bounce)†: 15 ms, max. and PC board conductor width. Coil rise test performed with 30A PC board to † At or From Nominal Coil Voltage maintain 20°C maximum rise @ 30A. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 504 specified. Refer to inside back cover. Coil Temp. Rise Above Ambient (°C) Coil Temp. Rise Above Ambient (°C) Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B T90 S 5 D 1 2 -24 1. Basic Series: T90 = Printed circuit board power relay. 2. Enclosure: N = Open, no cover (snap-on dust cover available as an option). S = Immersion cleanable, sealed plastic case with knock-off nib for ventilation. 3. Contact Arrangement: 1 = 1 Form A (SPST-NO). 5 = 1 Form C (SPDT). 4. Coil Input: D = DC Voltage. 5. Terminals: 1 = Printed circuit terminals. 4 = Printed circuit terminals, no common terminal between coil terminals (see wiring diagram). Note: Terminal code 4 recommended for UL 873 applications. Consult factory for use of terminal code 1 for UL 873 applications. 6. Contact Material: 2 = Silver-cadmium oxide. 7. Coil Voltage: 5 = 5V DC 6 = 6V DC 9 = 9V DC 12 = 12V DC 15 = 15V DC 18 = 18V DC 24 = 24V DC 48 = 48V DC 110 = 110V DC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T90N1D12-12 T90N1D42-24 T90N5D42-24 T90S1D42-24 T90S5D42-24 T90N1D12-18 T90N5D12-12 T90S1D12-12 T90S5D12-12 T90N1D12-24 T90N5D12-24 T90S1D12-24 T90S5D12-24 Outline Dimensions Optional Dust Cover For Use With Open-Style Relays Optional plastic dust cover is a snap-on unit, open on the PC board side of T90N .031 x .062 the relay. The cover, when ordered with the relay, is shipped separately. It .680 MAX. (.79 x 1.58) is designed to be snapped into place by the customer after the relay has (17.27) TERMINALS .950 MAX. been assembled to the PC board. (24.13) .130 ± .020 (3.3 ± .51) 1.20 MAX. (30.5) Cover Ordering Information – Boldface items are stocked. Part No. Description 35C620A Black dust cover for use on open-style, T90N relay. .025 x .025 .045 x .045 (.64 x .64) (1.14 x 1.14) TERMINALS 1.067 MAX. TERMINALS .719 (27.1) (18.26) T90S .130 + .016 – .010 .805 MAX. .212 MAX. .50 .69 3.30 + .41 (12.7) (20.4) (5.38) ( ) (17.5) –.25 .032 x .062 (.8 x 1.6) 1.256 MAX. TERMINALS (31.9) .10 MAX. .50 .69 (2.54) (12.8) (17.6) .090 1.27 MAX. (2.29) (32.26) .87 (22.1) .025 x .025 2x (.64 x .64) TERMINALS .016 1.08 MAX. (.43) .045 x .045 (27.43) 2x (1.14 x 1.14) TERMINALS UL & CSA Contact Ratings Wiring Diagram & PC Board Layout (Bottom Views) 1 Form C (Unused terminals Voltage Load Type N.O. Contact N. C. Contact .081 ± .005 DIA. are not present) (2.06 ± .13) .078 ± .003 DIA. (1.98 ± .08) .100 Silver Contacts .300 (2.54) (7.62) 240VAC General Purpose 10A 5A 240VAC Resistive 10A 5A 28VDC Resistive 10A 5A Silver-Cadmium Oxide Contacts .600 .600 (15.24) (15.24) 240VAC General Purpose† 30A 15A 240VAC UL Resistive† 20A 15A 120VAC Motor 1 HP 1/4 HP .043 ± .003 DIA. (1.09 ± .08) 240VAC Motor 2 HP 1/2 HP .350 240VAC LRA/FLA† 80/30 30/10 .150 Note: This terminal not (8.89) (3.81) 240VAC Tungsten TV5 TV3 present with .550 277VAC Ballast 6A 3A terminal code 4. (13.97) 28VDC Resistive 20A 10A .700 17.78 † For Form C application, derate current to 67%. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 505 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B T9A series DC Coil 30 Amp PC Board or Panel Mount Relay File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Dielectric Strength • Up to 30 amp switching in SPST and 20 amp in SPDT arrangements. Between Open Contacts: 1,500V rms. (6) • Immersion cleanable , plastic sealed case available. Between Contacts and Coil: 2,500V rms. • Meets UL 873 and UL 508 spacing – 1/8" through air, 1/4" over surface. 6 kV surge using 1.2μs/50μs Impulse Wave or • Load connections made via 1/4" Q. C. terminals and safety wells accept .5μs – 100kHz Ring Wave insulated female Q. C. terminals (mounting codes 2 & 5). • UL Class F insulation system standard. • Well suited for various industrial, commercial and residential applications. Contact Ratings @ 25°C Initial Insulation Resistance Arrangements: 1 Form A (SPST-NO), and 1 Form C (SPDT). 9 Material: Silver-cadmium oxide. Between Mutually Insulated Elements: 10 ohms, min., @ 500VDC, Mechanical Life: 10 million operations, typical. 25°C and 50% R.H. Minimum Contact Load: 1A @ 5VDC or 12VAC. Initial Contact Resistance: 75 milliohms, max., @ min. rated current (switched). Contact Ratings @ 25°C (unless otherwise noted) with relay properly vented. Remove vent nib after soldering and cleaning. Coil Data @ 25°C Typical Electrical Load & Life - 1 Watt Coil Voltage: 5 to 110VDC. Contact Contact Load Type of Load Operations Nominal Coil Power: 1.0W, (approx.) and 900mW (approx.) versions. Arrangement Maximum Coil Power: 2.8 Watt. 1 30A @ 240VAC UL General Purpose 100,000 (5) Maximum Coil Temperature : Class F: 155°C. 25A @ 240VAC Resistive Heater 100,000 Duty Cycle: Continuous. 5 20A/10A @ 240VAC UL General Purpose 100,000 20A/10A @ 240VAC UL Resistive 100,000 20A/10A @ 28VDC Resistive 100,000 Coil Data - 1 Watt UL 508/873 & CSA Contact Ratings - 900mW Coil Nominal DC Resistance Nominal Voltage ± 10% (Ohms) Current (mA) Voltage Load Type N.O. Contact N.C. Contact Operations 525 200 240VAC General Purpose 30A – 100,000 981 111 240VAC Resistive 18A – 100,000 @ 105°C 12 144 83 240VAC Resistive – 15A 6,000 18 324 56 240VAC LRA/FLA 30A/15A – 100,000 24 576 42 48 2,304 21 120VAC LRA/FLA 50A/16A – 100,000 110 12,100 9 120VAC LRA/FLA 30A/11A – 200,000 Note: Consult factory for other 900mW version contact ratings. UL 508/873 & CSA Contact Ratings - 1 Watt Coil Coil Data - 900mW Voltage Load Type N.O. Contact N.C. Contact Nominal DC Resistance Nominal Voltage ± 10% (Ohms) Current (mA) 277VAC Tungsten * 5.4A – 5 27 185 277VAC Ballast 10A 3A 997 93 240VAC Motor 2 HP 1/2 HP 12 155 77 240VAC Resistive *† 25A 20A 18 380 47 24 660 36 240VAC General Purpose† 30A 15A 48 2,560 19 240VAC LRA/FLA **†† 80A/30A 30A/12A 110 13,450 8 240VAC Pilot Duty * 470VA 275VA 125VAC Motor 1 HP 1/4 HP 120VAC LRA/FLA 98A/22A – 120VAC Tungsten * 8.3A – 120VAC Pilot Duty 470VA – Operate Data @ 25°C 28VDC Resistive 20A 10A Must Operate Voltage: 75% of nominal voltage or less. * Rated 6,000 operations. Must Release Voltage: 10% of nominal voltage or more. ** Higher UL & CSA ratings available. Operate Time (Including Bounce)§: 15 ms, max. † For Form C application, derate current to 20A (N.O.), 10A (N.C.). Release Time (Including Bounce)§: 15 ms, max. †† For Form C application, derate current to 67%. § At or From Nominal Coil Voltage Note: Consult factory for other 900mW version contact ratings. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com Technical support: reference purposes only. (millimeters) unless otherwise subject to change. 506 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ambient Temperature vs. Coil Voltage - 1 Watt Coil Environmental Data Data below are average values and should be verified in application. Tests Storage Temperature Range: -55°C to 130°C. (1) were conducted within a 2' (.6 m) cube (still air); at nominal coil power @ Operating Temperature Range : -55°C to +85°C. 25°C; with normally open contact loaded; and with 4' (1.22 m) long, #10 Vibration, Operational: 0.065" (1.65mm) max. excursions from 10-55 Hz. AWG load wires. P.C. board relays were mounted to a 30A, single side P.C. with no contact opening >100μs. (6) board . Shock, Operational: 10g for 11 ms with no contact opening >100μs. Shock, Mechanical: 100g. 140 120 100 80 0A 60 10A 20A 40 Mechanical Data (note 3) Sealed Relay, Vented ; 30A 20 (4) Load Connections Via Q.C. Terminals, Termination: Printed circuit and quick connect terminals . PC Mount Enclosures (all have 94V-0 flammability rating): 0 T9AP: Unsealed, plastic dust cover. 60 80 100 120 140 160 180 (2 & 3) Applied Continuous Coil Voltage (% of Rated Voltage) T9AS: Immersion cleanable, sealed plastic case . T9AV: Vented, flux-tight, plastic cover. 140 Weight: Q.C. version: 1.2 oz. (33g) approx. (mounting code 2 & 5). Sealed Model T9AS: 0.9 oz. (26g) approx. (mounting code 1). 120 100 0A 80 10A 20A 60 Relay With Dust Cover, 30A Flange Mount 40 60 80 100 120 140 160 180 Applied Continuous Coil Voltage (% of Rated Voltage) Notes 140 (1) Operating ambient temperature must consider “Must Operate Voltage 120 Change Over Temperature,” Contact Temperature Rise, Coil Temperature Rise (If coil is not allowed to cool) and Maximum Coil Temperature. 100 Specification ambient considers 20A load with coil cooled to ambient. 80 (2) Sealed relay terminals should not be bent. (3) Remove knock-off nib after cleaning process for optimum life of sealed 60 0A relays. 10A (4) Maximum soldering temperature is 500°F for 4 seconds. 40 20A (5) Class F coils are UL systems approved for maximum coil temperature of (note 3) 20 Sealed Relay, Vented 140°C, by change of resistance method. PC Terminals For Coil & Contacts 30A (6)See application note 13C265 for proper relay mounting, termination, 0 60 80 100 120 140 160 180 cleaning and PC board conductor width. Coil rise test performed with 30A Applied Continuous Coil Voltage (% of Rated Voltage) PC board to maintain 20°C maximum rise @ 30A. Ordering Information Typical Part Number B T9A S 5 D 2 2 -12 1. Basic Series: T9A = Low cost, printed circuit board/panel power relay. 2. Enclosure: P = Unsealed, plastic dust cover (mounting code 5). S = Immersion cleanable, knock off nib, sealed plastic case (mounting codes 1 & 2). V = Vented, flux-tight (mounting code 1). 3. Contact Arrangement: 1 = 1 Form A (SPST-NO). 5 = 1 Form C (SPDT). 4. Coil Input: D = DC voltage (1 Watt) L = DC voltage (900mW) 5. Mounting & Termination: (a) 1 = Printed circuit board mounting; PC terminals for coil & contacts . (b) 2 = Printed circuit board mounting; PC terminals for coil & contacts, and .250" (6.35mm) quick connects for contacts . (c) 5 = Flanged mounting; .187" (4.75mm) quick connects for coil and .250" (6.35mm) quick connects for contacts . 6. Contact Material: 2 = Silver-cadmium oxide. 7. Coil Voltage: 5 = 5VDC 12 = 12VDC 24 = 24VDC 110 = 110VDC 9 = 9VDC 18 = 18VDC 48 = 48VDC a) Only available with enclosure code “S” & “V”. b) Only available with enclosure code “S”. c) Only available with enclosure code “P”. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. T9AS1D12-24 T9AS5D22-12 T9AP1D52-9 T9AP1D52-12 T9AS1D12-48 T9AS5D22-24 T9AS1D22-12 T9AV1L22-24 T9AP5D52-12 T9AP5D52-24 T9AS1D22-24 T9AS5D12-12 T9AS1D12-12 T9AS1D12-18 T9AS5D12-24 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 507 specified. Refer to inside back cover. Max. Alowable Max. Alowable Max. Alowable Ambient Temp. (°C) Ambient Temp. (°C) Ambient Temp. (°C) Catalog 1308242 Issued 3-03 P&B Outline Dimensions T9AS – Mounting & Termination Code 2 T9AP – Mounting & Termination Code 5 .187 x .020 1.080 MAX. 1.100 MAX. (4.75 x .508) (27.43) (27.94) QUICK CONNECT .250 x .032 QUICK .130 ± .020 (6.35 x .81) CONNECT (3.30 ± .51) .250 x .032 (6.35 x .81) .03 QUICK Ş (.80) 1.980 MAX. CONNECT 2 PLACES (50.29) .045 x .045 1.713 ± .010 1.280 MAX. 1.280 MAX. (1.14 x 1.14) (43.51 ± .25) (32.51) (32.51) .032 x .062 (.81 x 1.57) 1.080 MAX. 1.100 MAX. (27.43) (27.94) .071 (1.80) RAD. FOR #6 SCREW Note: Recommended mounting screw torque is 4.0-5.0 lbs.in when #6 screw is used. T9AS/V – Mounting & Termination Code 1 .805 MAX. .212 MAX. (20.4) .130 + .016 (5.38) .032 x .062 – .010 (.8 x 1.6) 3.30 + .41 ( ) TERMINALS –.25 .50 .10 MAX. .69 (12.8) (2.54) (17.6) 1.280 MAX. (32.51) .045 x .045 (1.14 x 1.14) TERMINAL .03 Ş (.80) .016 1.08 MAX. TERMINALS (.43) (27.43) PC Board Layouts (Bottom Views) Wiring Diagrams (Bottom Views) 1 Form A 1 Form C T9AP/S – Mounting & Termination Code 2 .140 MAX. .250 MAX. .081 ± .005 DIA. (3.56) (6.35) (2.06 ± .13) .100 .300 .078 ± .003 DIA. (2.54) (7.62) (1.98 ± .08) .600 .043 ± .003 DIA. .500 (15.24) (1.09 ± .08) (12.7) .150 (3.81) .550 (13.97) .700 (17.78) T9AS/V – Mounting & Termination Code 1 .212 MAX. .081 ± .005 DIA. (5.38) (2.06 ± .13) .100 .300 (2.54) (7.62) .078 ± .003 DIA. (1.98 ± .08) .600 .500 .043 ± .003 DIA. (15.24) (12.7) (1.09 ± .08) .150 (3.81) .550 (13.97) .700 (17.78) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com Technical support: reference purposes only. (millimeters) unless otherwise subject to change. 508 specified. Refer to inside back cover. NC NO COM NC NO COM Catalog 1308242 Issued 3-03 P&B 491 series AC Coil 20 Amp PC Board or Panel Mount Relay File E38802 File LR75282 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features Nominal DC Resistance Must Operate Must Release • Up to 20 amp switching in SPST-NO and 13.3 amp in SPDT arrange- Voltage ± 10% (Ohms) Voltage (Max.) Voltage (Min.) ments. 12 26 10.2 1.8 • Washable, plastic sealed case available. 24 106 20.4 3.6 • Meets UL 873 and UL 508 spacing – 1/8" through air, 1/4" over surface. 110 2,750 93.5 16 • Load connections made via 1/4" Q. C. terminals. 220 11,000 187 33 • Choice of UL Class B or F insulation system. • Well suited for various industrial, commercial and residential applications. Operate Data @ 25°C Contact Ratings @ 23°C Must Operate Voltage: 85% of nominal voltage or less. Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC) and 1 Form C Must Release Voltage: 15% of nominal voltage or more. (SPDT). Operate Time (Including Bounce)§: 20 ms, max. Material: Silver-cadmium oxide. Release Time (Including Bounce)§: 15 ms, max. Mechanical Life: 10 million operations, at 300 ops/minute. § At or From Nominal Coil Voltage Electrical Life: 100,000 operations at factory rated load, 6 ops/minute. Minimum Contact Load: 1A @ 5VDC or 12VAC. Initial Contact Resistance: 50 milliohms @ 100mA, 6VDC). Environmental Data Storage Temperature Range: -40°C to 130°C. (1) Contact Ratings @ 23°C with relay properly vented. Remove tape Operating Temperature Range : -55°C to +85°C. Vibration, Operational: 0.065" (1.5mm) max. excursions from 10-55 Hz. from vent hole after soldering and cleaning. Shock, Operational: 10g for 11 ms. Shock, Mechanical: 100g. Factory Contact Ratings Voltage 1 Form A 1 Form B 1 Form C (NO) (NC) Mechanical Data 240VAC 20A 10A 13.3A 6.7A (4) Termination: Printed circuit and quick connect terminals . 28VDC 20A 6.7A 13.3A 6.7A Enclosures (all have 94V-0 flammability rating): Open, unsealed dust cover or sealed case. Weight: 1.2 oz. (33g) approx. UL/CSA Contact Ratings Voltage Load Type 1 Form A 1 Form B 1 Form C (NO) (NC) Coil Temperature Rise 240VAC General Purpose 30A 15A 20A 10A 240VAC Resistive * 30A 15A 20A 10A 240VAC Motor 2 HP 1/2 HP 2 HP 1/2 HP 120VAC Motor 1 HP 1/4 HP 1 HP 1/4 HP 240VAC LRA/FLA ** 80/30 30/10 50/20 20/7 120VAC LRA/FLA 98/22 – – – 120VAC Tungsten * TV5 TV3 TV5 TV3 277VAC Ballast 10A 3A 10A 3A 28VDC Resistive 20A 10A 20A 10A Initial Dielectric Strength Between Open Contacts: 1,500V rms, 1 minute. Between Contacts and Coil: 1,500V rms, 1 minute. Initial Insulation Resistance 9 Notes Between Mutually Insulated Elements: 10 ohms, min., @ 500VDC, 23°C and 50% R.H. (1)Operating ambient temperature must consider must operate voltage change over temperature, contact temperature rise, coil temperature rise (If coil is not allowed to cool) and maximum coil temperature. Coil Data @ 23°C (2) Sealed relay terminals should not be bent. (3) Remove tape after cleaning process for optimum life of sealed relays. Voltage: 12 to 220VAC. (4) Class B coils are UL systems approved for maximum coil temperature of Nominal Coil Power: 2.0VA, (approx.). (4) 130°C, by change of resistance method. Class F coils are UL systems Maximum Coil Temperature : Class B: 130°C. approved for maximum coil temperature of 155°C, by change of resistance Class F: 155°C. method. Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 509 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B 491 -1 1 G 2 00 1. Basic Series: 491 = AC coil, printed circuit board/panel power relay. 2. Enclosure & Terminals: 1 = Dust Cover, PC terminal. 7 = Sealed Case, Panel Mount, .187 Coil Terminal. 2 = Sealed Case, PC terminal. 8 = Open Unit 6 = Sealed Case, Panel Mount, .110 Coil Terminal. 3. Contact Arrangement: 1 = 1 Form C (SPDT) 4 = 1 Form B (SPST-NC) 5 = 1 Form A (SPST-NO) 4. Coil Input: P = 12VAC Q = 24VAC T = 120VAC U = 220VAC 5. Contacts: 2 = Silver-cadmium oxide 6. Coil Insulation and Special Features: 00 = Standard, UL Class B Coil Insulation System M0 = Magnetic Blowout (with enclosure 1 or 2 only, not UL or CSA) F0 = Special, UL Class F Coil Insulation System A1 - E9 = Special - Customer Specific Features Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. 491-21T200 491-24T200 491-61T200 491-64T200 491-24Q200 491-61Q200 491-64Q200 491-21Q200 Outline Dimensions 3 – .25 QC 1.22 .921 Open Style (6.35) (31.1) (23.4) 3 – .047 (1.2) .3 .403 (7.7) (10.24) 1.18 MAX. .7 (30 MAX.) (17.8) .9 (22.9) 2 – .024 DIA. .11 .15 .4 .63 (.6) .21 (2.8) (3.8) (10.2) (16.2) (5.4) PC Board Layout (Bottom View) Sealed Case for .11 PC Board Mounting 1.08 MAX. (2.8) 3 – .08 DIA. .138 1.10 MAX. (27.5) (2) (3.5) (28) .3 (7.7) 1.26 MAX. .6 2 – .04 DIA. (32.5) (2.54) (1) .24 .25 QC (6.1) (6.35) Reference Only .55 .7 (17.8) (17.8) Mounting Hole Pattern Sealed Case for 1.08 MAX. 2 – 0.12 (3.2) DIA. or M3 1.10 MAX. (27.5 MAX.) (28 MAX.) Panel Mounting 1.71 (43.5) 1.71 .25 QC (43.5) (6.35) 1.99 MAX. 1.28 MAX. (50.3 MAX.) (32.5 MAX.) .11 QC (2.8) Wiring Diagrams (Bottom Views) 1 Form A 1 Form B 1 Form C Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 510 specified. Refer to inside back cover. AC Coil 30 A AC Coil 0 A DC Coil 30 Amp Contact Load DC Coil 0 Amp Contact Load Catalog 1308242 Issued 3-03 P&B T92 series Two-Pole, 30 Amp PC Board or Panel Mount Relay File E22575 File E22575 (type 2,3,4,5) File LR15734 File No. 5386 (type 1,2,3,4) Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data (@ 25°C Coil Temperature) Features ( ) DC Coils 1.7W • 30A DPST-NO and DPDT switching capabilities. Nom. Voltage DC Resist. Nom. Voltage DC Resist. • Designed to control compressor loads to 3.5 tons, 25.3 FLA, 110 LRA. ( ) ( )( ) ( ) VDC ±10% Ohms VDC ±10% Ohms • Extended life – >300,000 operations at 30A, 240VAC (DC coil). 12 86 48 1,390 >100,000 operations at 30A, 240VAC (AC coil). 24 350 110 7,255 • Meets requirements of UL873 and UL508 spacings. ( ) AC Coils 4.0VA – .315” (8mm) through air, .375” (9.5mm) over surface. Nom. Voltage Freq. DC Resist. Nom. Voltage Freq. DC Resist. • Meets requirements of VDE 8mm spacing, 4kV dielectric coil-to-contacts. ( ) ( )( ) ( ) VAC ±10% Ohms VAC ±10% Ohms • Meets requirements of UL Class F construction. 12 60 9.1 110/120 50/60 950 • UL approved for 600VAC switching (1.5HP). 24 60 36.6 220/240 50/60 3800 • Conforms to VDE 0435, 0631, and 0700. 250/277 50/60 5485 • New screw terminal version (consult factory for availability, ratings). Ambient Temperature vs. Coil Voltage Contact Ratings @ 25°C with relay properly vented. 120 Remove tape over vent hole after soldering and cleaning. Arrangements: 2 Form A (DPST-NO) and 2 Form C (DPDT). 100 Materials: Silver cadmium oxide. 80 Max. Load Rating: Normally Open Contacts: 60 30A @ 120/277VAC, resistive; 40 10A @ 600VAC, resistive; 1 HP @ 120VAC, 2.5 HP @ 240VAC;1.5 HP @ 480VAC, 1.5 HP @ 600VAC 20 (1) 110 LRA, 25.3 FLA, @ 240VAC with DC coil ; . 60 LRA, 14 FLA @ 240VAC with AC coil 0 70 75 80 85 90 95 100 105 110 115 120 125 130 135 140 145 150 3A @ 240VAC pilot duty; Applied Coil Voltage (% of Rated Nominal) 20A @ 28VDC; TV10 @ 120VAC. Assumptions: VDE Rating (Flange Mount): 25A @ 400VAC, 100K Ops. (30K Ops. for 1. Thermal resistance = 35°C per Watt (DC only.) Form C Models). 2. Still air. VDE Rating (PC Mount): 30A @ 400VAC, 100K Ops. (30K Ops. for 3. Nominal coil resistance. Form C Models). 4. Max. mean coil temperature = 155°C (change of resistance method). Normally Closed Contacts: 5. Coil temperature rise due to load = 6.3°C @ 30 amps. 3A @ 28VDC or 277VAC, 2A @ 480VAC, 1A @ 600VAC. 6. Curves are based on 1.7W at 25°C (DC only.) VDE Rating (Flange or PC Mount): 3A @ 400VAC, 30K Ops. Min. Load Rating: Operate Data Normally Open Contacts: 500mA @ 12VAC/VDC. Must Operate Voltage: AC Coil: 80% of nominal voltage or less. Normally Closed Contacts: 100mA @ 6VAC/VDC. DC Coil: 75% of nominal voltage or less. Expected Mechanical Life: 5 million operations. Must Release Voltage: 10% of nominal voltage or more. Expected Electrical Life: 100,000 operations at rated load. (2) Initial Operate Time : 15 ms typical, (25 ms max. w/bounce). ARI 780-86 Endurance Test (section 6.6): (2) Initial Release Time : 10 ms typical, (25 ms max. w/bounce). HVAC Definite Purpose Contactor Standard Max Operating Frequency: 14 operations per minute. Normally Open Contacts Single Phase/Two Pole (Both poles together switching a single load) Environmental Data 110 LRA, 25.3 FLA, 200K operations (DC Coil). L1 L2 Temperature Range: Storage: -55°C to +155°C. Operating: AC Coil: -40°C to +65°C. T2 T1 DC Coil: -40°C to +85°C. Vibration: 0.065” (1.65mm) double amplitude for 10-55 Hz., functional. Single Phase Per Pole (Single load per pole) L1 L2 Shock, Operational: 10g for 11 ms, 1/2 sine wave pulse with no contact 110 LRA, 18 FLA, 200K operations (DC Coil). opening > 100μs. T1 T2 60 LRA, 14 FLA, 200K operations (AC Coil). Shock, Mechanical: 100g for 11 ms, 1/2 sine wave pulse. Flammability: UL 94V-0. Notes: Vent hole tape must be removed to achieve all listed ratings. Consult factory regarding ratings for screw terminal versions. Mechanical Data Termination: Printed circuit terminals; .250” (6.35mm) quick connects for Initial Dielectric Strength coil and contacts; .187” (4.75mm) quick connects for coil Between Contacts and Coil: 4,000V rms, 50/60 Hz. and .250” (6.35mm) quick connects for contacts; or M4 Between Open Contacts: 1,500V rms, 50/60 Hz. screws with captive pressure plates for coil and contacts. Between Poles: 2,000V rms, 50/60 Hz. Enclosure: Unsealed, plastic dust cover or immersion cleanable, tape sealed plastic cover. Initial Insulation Resistance Weight: 3 oz. (86g) approximately. 9 Between Mutually Insulated Elements: 10 ohms, min. @ 500VDC. Conditions Coil Data All parametric, environmental and life tests are performed according to EIA Voltage: 12 through 110VDC and 12 through 277VAC. Standard RS-407-A at standard test conditions (25°C ambient, 20-50% RH, Resistance: See Coil Data table. 29.5 ± 1” Hg.) unless otherwise noted. Nom. Power: AC Coil: 4.0VA; DC Coil: 1.7W. Notes Coil Temp. Rise: 35°C/W. Max. Coil Temp.: 155°C. (1) FLA, LRA ratings are compatible with 3.5 ton compressor applications. Duty Cycle: Continuous. (2) Nominal voltage, no coil suppression, excluding bounce. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 511 specified. Refer to inside back cover. Max. Allowable Ambient Temp. (°C) Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B T92 S 11 D 2 2 -24 1. Basic Series: T92 = Printed circuit board / panel mount power relay. 2. Enclosure: P = Plastic dust cover (unsealed). S = Immersion cleanable, tape sealed plastic case (code 1). Top sealed, not immersion cleanable, not tape sealed on bottom (codes 2, 3 & 4). 3. Contact Arrangement: 7 = 2 form A (DPST-NO). 11 = 2 form C (DPDT). 4. Coil Input: A = AC voltage, 60 Hz. or 50/60 Hz. (See Coil Data Table) D = DC voltage. 5. Mounting & Termination: 1 = Printed circuit board mount; printed circuit board terminals. 2 = Panel mount via flanged cover; .250” (6.35mm) x .032” (.81mm) quick connect terminals. 3 = Panel mount via flanged cover; .187” (4.75mm) x .032” (.81mm) quick connect terminals for coil and .250” (6.35mm) for contacts. 4 = Panel mount via flanged cover, .187” (4.75mm) x .020” (.51mm) quick connect terminals for coil and .250” (6.35mm) for contacts. 5 = Panel mount via flanged cover, M4 screw terminals w/ captive pressure plates. Requires Enclosure P and Contact Arrangement 7.‡ 6. Contact Material: 2 = Silver cadmium oxide. 7. Coil Voltage: (See Coil Data Table) (DC) 12 = 12VDC 24 = 24VDC 48 = 48VDC 110 = 110VDC (60Hz.) 12 = 12VAC 24 = 24VAC (50/60Hz.) 110 = 100/110VAC 120 = 110/120VAC 240 = 220/240VAC 277 = 250/277VAC ‡ New option. Consult factory for detailed ratings, specifications and availability. Stock Items – We recommend that our authorized distributors stock the following items for immediate delivery. T92P7A22-24 T92P7D12-24 T92P7D22-24 T92P11A22-120 T92S7D12-12 T92P7A22-240 T92P11D22-12 T92S11D22-12 T92P7A22-120 T92P7D12-12 T92P7D22-12 T92P11A22-24 T92P11A22-240 T92P11D22-24 T92S7D12-24 T92S11D22-24 Outline Dimensions Mounting & Termination Type 1 Mounting & Termination Types 2, 3 & 4 1.36 MAX. 2.700 MAX. 2.06 MAX. 1.36 MAX. (34.54) (68.58) (52.32) (34.54) 1.04 MAX. 1.495 MAX. 1.21 MAX. (26.42) (37.97) (30.73) .156 (3.96) .250 TYP. (6.35) 1.618 ± .020 2.05 MAX. (41.10 ± .51) .047 TYP. .585 ± .005 (52.07) (1.19) (14.86 ± .13) .032 TYP. .309 ± .005 2.35 ± .005 (0.81) (7.85 ± .13) (59.71 ± .13) 1.618 TYP. (41.10 ± .51) .585 ± .005 (14.86 ± .13) .309 ± .005 1.000 ± .010 (7.85 ± .13) .630 ± .005 (25.40 ± .25) .090 RAD. (16.00 ± .13) (2.29) FOR #8 SCREW .630 TYP. (16.00) Mounting & Termination Type 5 2.700 MAX. Suggested PC Board Layout Wiring Diagram (68.58) (Bottom View) 1.36 MAX. 0 1.618 (34.54) (41.10) 2 4 3 .090 (2.29) .585 RAD. FOR (14.86) .185 .309 #8 SCREW 6 8 7 (4.70) (7.85) .365 1 2.35 ± .005 (9.27) (59.71 ± .13) 1.431 MAX. 2.135 MAX. .630 1.000 (36.34) (54.23) (16.00) Only necessary terminals are (25.40) present on single throw models. .203 TYP. (5.16) .052 TYP. 2.010 MAX. .072 TYP. (1.32) (51.05) (1.83) .162 (4.12) .913 MAX. Note: An alternate PC board layout utilizes .076 ± (23.19) .003 (1.93 ± .076) diameter holes on the same center-to-center spacing shown above. Use of the rectangular holes is recommended for improved solderability. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 512 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 RELAYS WITH FORCIBLY-GUIDED CONTACTS Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 SR2M (V23047) ......... 2 Pole Relay ...................................... 603 SR4 D/M.................... 4 Pole Relay ...................................... 606 SR6 (V23050) ............ 6 Pole Relay ...................................... 609 SR6 D/M.................... 4 Pole Relay ...................................... 607 Transformers.............................. 201-212 2 SR6S ......................... Sensitive 6 Pole Relay ...................... 611 SR6Z.......................... 6 Pole Relay Module......................... 613 V23047 (SR2M) ......... 2 Pole Relay ...................................... 603 Low-signal PC Board Relays. 301-336 3 V23050 (SR6) ............ 6 Pole Relay ...................................... 609 Mid-Range PC Board Relays ....... 19-21 4 Power PC Board Relays ................ 22-35 5 Relays with 6 Forcibly Guided Contacts ...... 601-614 Plug-in/Panel Mount 7 General Purpose Relays................ 80-88 Definitions – Relays with forcibly guided contacts ("safety relays") Power Relays & Definite 8 General Information Function Purpose Contactors...................... 89-131 Relays with forced guidance contacts play a decisive role in avoiding Power relays with forcibly guided (linked) contacts: accidents on machines and in systems. Safety control circuits enable Power relays with at least one break contact and at least one make Latching, Impulse & to switch into the fail safe state. Forcibly guided contacts monitor the contact designed that by mechanical means make and break contacts 9 Rotary Relays ...............................149-154 function of the safety control circuits. can never be simultaneously in the closed position. For this safety function, all the assumed faults that can occur must Contact gaps shall never be less than 0.5 mm over the operating life, already have been taken into consideration and their effects exam- not only under normal operating conditions, but also when a fault ined. Standard EN 50205 "Relays with forcibly guided contacts" occurs. Automotive Relays ......................141-148 10 contains current internationally-defined design requirements. Relays This requirement allows the respective exclusive-or contact to detect with forcibly guided contacts that comply with EN 50205 are also the fault of a contact to open. For example, the welding of a make referred as "safety" relays. contact is indicated by the non-closing of the break contact when the Solid State Relays & energization is switched off. 11 Input/Output Modules ................195-207 To fulfill the specifications of the standard, the assumed faults must be considered: Time Delay Relays & Assumed fault Effect 12 Counters ........................................208-232 Failure of the contact to open The failure of any make contact to open has the effect that none of the due to welding break contacts close even when the relay is not energized. The failure of any break contact to open has the effect that none of the make contacts close when the relay is energized. Sensors & Monitors ...................233-234 13 Failure of the contact to open The drive has no effect on the forcibly guided contact operation. due to failure of the drive Breakage of the contact spring Simultaneous closing of the break and make contacts is not possible even as a High Performance Relays result of breakage. Completely insulated contact chambers (SR2, SR4, SR6) or barriers (SR2M) guarantee a contact gap of 0.5 mm. and Contactors (overview) ....... 233-234 14 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 601 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 RELAYS WITH FORCIBLY-GUIDED CONTACTS Application Example – Relays with forcibly guided contacts ("safety relays") The configuration of safety control circuits is basically only possible Operation with specified fault conditions. Safety relays have the characteristic - Closing the "ON" switch causes the K1 relay to be pulled in that make and break contacts can never both be closed at the same - The K2 and K3 relays are energized via the make contacts time. K1-1 and K1-2 and hold themselves via K2-2 or K3-2 - The break contacts K2-1 and K3-1 cause the drop-out of K1 The following circuit diagram shows an emergency stop control circuit where the load circuit is released via the break contacts of consisting of three 4-pole safety relays. K1-3 or K1-4. The first fault to occur - does not cause the safety function to fail because more components are used than required for the circuit to function (redundancy). - prevents an restart and can be detected as a result (self monitoring) Fault analysis (examples): Type of fault Is there any danger arising from the fault? Is a restart possible? Failure of contact No, K3-3 opens when the emergency No, K2-1 and K2-3 cannot be closed at the K2-3 to open stop switch is actuated same time (fault excluded by forcibly guidance). "ON" button does not cause K1 to close Failure of contact No, K2-3 and K3-3 open when the No, K1-1 and K1-2 cannot close due to K1-3 to open emergency stop switch is actuated closed K1-3. K2 and K3 are not energized Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 602 specified. Refer to inside back cover. 500W 200W 100W 50W 20W 10W Catalog 1308242 Issued 3-03 SCHRACK V23047 series SR2M "Safety Relay" - PCB, neutral, monostable relay with two forcibly guided contacts. File E214024 VDE No. 116064 .. TUV Rheinland TUV-Rheinland, No. 945/EZ 116/99 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Insulation Resistance 6 • 1 NO and 1 NC or 2 Form C contacts. Between Mutually Insulated Elements: 10 ohms. • High insulation spacing for the safe separation of the contact circuits. • Sealed case. Coil Data @ 23°C • Ideal for emergency shut-off, machine control, elevator and escalator Voltage: 5 to 110VDC. control, light barrier control. Nominal Power: 700mW. Max. Coil Temperature: 105°C. Contact Data @ 23°C Duty Cycle: Continuous. Type: Single button contacts, forcibly guided. Arrangements: 1 NO and 1 NC or 2 Form C. Coil Data @ 23°C Material: Silver-nickel alloy. Rated Coil Coil Must Operate Nominal Max. Continuous Current at Max. Amb. Temp.: 6A, 1 contact loaded. Voltage Resistance Voltage Coil Current Max. Switched Current: See Expected Electrical Life chart. (VDC) (Ohms) (VDC) (mA) Max. Switched Voltage: 250VDC. 5 35.7 ± 3.6 3.75 140 Max. Switched Power: 1,500VA. (See Fig. 1, Limit Curve for DC Power Load). 6 51 ± 5.1 4.5 118 Max. Switching Rate: 6 operations/min. at rated load. 9 116 ± 11.6 6.8 78 300 operations/min. at minimum load. 12 206 ± 20.6 9 60 Minimum Load: AgNi: >50mW. 21 630 ± 63.0 15.8 34 Initial Contact Resistance: AgNi: ≤100 mΩ - 1A/24VDC. 24 823 ± 82.3 18 30 7 Expected Mechanical Life: 10 operations. 36 1,851 ± 185 27 19.5 Expected Electrical Life: 48 3,291 ± 494 36 14.6 6A @ 250VAC, Resistive, 100,000 ops. @ 70°C amb. temp.; 60 5,142 ± 617 45 11.7 80 9,143 ± 1,097 60 8.8 10/0.5A @ 110VAC, Inductive, 2,000,000 ops. @ 23°C amb. temp.; 110 17,285 ± 2,074 83 6.4 6A/230VAC, 100,000 ops. @ 70°C amb. temp.; 6A/24VDC, T = 300ms, switchcycle 0.1 Hz., 0.95 Operate Data @ 23°C Standard IEC947-5-1 (DC-13), NO contact loaded; Operate Time: 10 ms (excluding bounce). Standard IEC947-5-1 (AC-15), power factor 0.3; switchcycle 0.1 Hz., Release Time (w/o parallel diode, typ.): 4 ms (excluding bounce). NO contact: 3A/230VAC, inrush current 30A, 6,050 ops., Bounce Time: 10 ms. NC contact: 1.5A/230VAC, inrush current 15A, 6,050 ops; Must Release Voltage: 10% of nominal voltage. 3A/24VDC, T = 300ms, switchcycle 0.33 Hz., Diode (1N4007) 0.95 across the inductive load, Standard IEC947-5-1 (DC-13), Max. Allowed Ambient Temp. vs. Applied Coil Voltage NO contact loaded, 1,000,000 ops; 1A/24VDC, T = 144ms, switchcycle 0.33 Hz., Diode (1N4007) 0.95 2.0 Operating across the inductive load, Standard IEC947-5-1 (DC-13), 1.9 Curve 1 - Must operate voltage NO contact loaded, 1,500,000 ops. 1.8 when the coil is not pre-energized. 1.7 Curve 2 - Operate voltage raises due to a pre-energizing with 1.1 x Vnom. Figure 1 - Limiting Curve for DC Power Load 1.6 Curve 3 - Maximum allowable voltage. 1.5 1000 1.4 Release 1.3 500 The must release voltage may fall to 1.2 W 5% of Vnom during operation life of the relay. Curve 3 1.1 1.0 Denotes recommended operation 0.9 100 Curve 2 area. 0.8 Curve 1 0.7 0.6 -20 -10 0 10 20 3040 5060 70 Max. Allowable Ambient Temperature (°C) 10 Environmental Data 0.1 1 10 Temperature Range: -25°C to +70°C. Switching Current (Amps DC) Solder Bath Temp./Max. Duration: 260°C/5s. Initial Dielectric Strength Mechanical Data Between Open Contacts: 1,000V rms. Termination: Printed circuit terminals. Enclosure (94V-0 Flammability Ratings): Sealed plastic case. Between Adjacent Contacts: 4,000V rms. Weight: 0.6 oz. (18g). Between Coil and Contacts: 4,000V rms. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 603 specified. Refer to inside back cover. Switching Voltage (VDC) Applied Coil Voltage (% of rated nom.) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B V23047 A1 012 A 5 01 1. Basic Series: V23047 = SR2M safety relay. 2. Enclosure: A1 = Sealed. 3. Coil Voltage: 005 = 5VDC 006 = 6VDC 009 = 9VDC 012 = 12VDC 021 = 21VDC 024 = 24VDC 036 = 36VDC 048 = 48VDC 060 = 60VDC 080 = 80VDC 110 = 110VDC 4. Contact Type: A = Single button, forcibly guided. 5. Contact Material: 5 = Silver nickel. 6. Contact Arrangement: 01 = 2 Form C. 11 = 1 NO and 1 NC. Our authorized distributors are more likely to stock the following items for immediate delivery. V23047A1012A501 V23047A1012A511 Wiring Diagrams (Bottom Views) Outline Dimensions 1 NO and 1 NC 1.14 MAX. (29.0) .50 (12.6) A1 11 14 22 21 A2 1 (25.4) .094 2 Form C .130 (2.4) (3.3) A1 12 11 14 22 21 24 A2 Suggested PC Board Layouts (Bottom Views) 1 NO and 1 NC 2 Form C .098 - 1.0 (2.5 - 2.54) .098 - 1.0 (2.5 - 2.54) .051 .051 ∅ ∅ (1.3) (1.3) .098 - 1.0 .098 - 1.0 (2.5 - 2.54) (2.5 - 2.54) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 604 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Sockets for V23047 Series Relays RP78602 RT78625 Socket with PCB Terminals DIN Rail Mount Socket with Screw-Type Terminals .098 - 1.0 (2.5 - 2.54) .059 .354 ∅ (1.5) (9.0) 21 11 24 14 Retainer Relay 1.22 2.97 (31.0) (75.5) .098 - 1.0 (2.5 - 2.54) .425 Module (10.8) A2 A1 .50 22 12 .189 (12.7) (4.8) .177 (4.5) .61 .874 (15.5) (22.2) 2.68 (68.0) RP16104 Plastic Retaining Clip RT78626 DIN Rail Mount Socket with Screw-Type Terminals 22 12 21 11 24 14 Relay 2.97 (75.5) Retainer Module A2 A1 .61 3.07 (15.5) (78.0) RP16104 Plastic Retaining Clip RT16040 Marking Tags Function and Protection Modules .236 (6.0) • Easy insertion of module into the socket. • Wiring in parallel to the coil. .059 (1.5) • White • Marking area .610 (15.5) x .236 (6.0). • Snaps on socket in up to 4 positions. Ordering Code Type RT16040 Marking Tags RPMT00A0 Protection Diode 1N4007* RPML0024 LED 12 - 24VDC* RPML0524 LED 12 - 48VDC RPML0110 LED 110VDC* * Standard Polarity: A1:+, A2:- Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 605 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK SR4 D/M series “Safety Relay” with four forcibly guided contacts. File E214024 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data DC @ 20°C • 2 NO + 2NC or 3NO + 1 NC contacts. Nominal Coil Power: 800mW. • 4kV/10mm contact-to-coil. DC Must Nominal • Compact package. Nominal Resistance Operate Drop-out Coil • Well suited for emergency shut-off, machine control, elevator and Voltage in VoltageVoltageCurrent escalator control, light barrier control. VDC Ohms VDC VDC (mA) Contact Data 5 31 ± 10% 3.8 0.5 161.3 6 45 ± 10% 4.5 0.6 133.3 Type: Single button contact, forcibly guided. 9 101 ± 10% 6.8 0.9 89.1 Arrangements: 2 NO + 2NC or 3NO + 1 NC. 12 180 ± 10% 9.0 1.2 66.7 Material: Silver-tin oxide. 15 281 ± 10% 11.3 1.5 53.4 Expected Mechanical Life: 10 million operations. 18 405 ± 10% 13.5 1.8 44.4 Ratings: 21 551 ± 10% 15.8 2.1 38.1 Current: 8A. 24 720 ± 10% 18.0 2.4 33.3 Voltage: 250VAC. 36 1,620 ± 10% 27.0 3.6 22.2 Voltage (breaking): 440VAC. 40 2,000 ± 10% 30.0 4.0 20.0 Power (breaking): 2,000VA. 48 2,880 ± 10% 25.0 4.8 16.7 Minimum Contact Load: >50mW. 60 4,500 ± 10% 45.0 6.0 13.3 Initial Contact Resistance: ≤ 100 millohms/1A/24VDC; 85 9,031 ± 10% 64.0 8.5 9.4 ≤ 20 millohms/10mA/5VDC. 110 15125 ± 10% 82.5 11.0 7.3 Initial Dielectric Strength All values are given for coil without preenergization, at 20°C ambient. Between Open Contacts: 1,000Vrms. At 70°C after preenergization with 1.1 x nominal voltage, the maximum Between Coil and Contacts: 4,000Vrms. operating voltage is 85% of nominal. Between Contact Sets: 2,500Vrms. At 70°C maximum coil voltage is 1.1 x nominal. Creepage/Clearance: Contact-to-coil: 10/10mm. Between Contact Sets: 3/3.5mm. Environmental Data Initial Insulation Resistance Temperature Range: Operating: -20°C to +70°C. 6 Between Mutually Insulated Elements: 10 ohms. Vibration (10-200 Hz.): NO: 8g; NC: 2.5g. Mechanical Data Operate Data Termination: Printed circuit terminals. Must Operate Voltage: See Coil Data table. Enclosure: Sealed (RTIII) plastic case. Operate Time /Release Time (typical): 12 ms / 20 ms. Weight: 0.56 oz. (16 g) approximately. Switching Rate: 3,600 ops./hr. max. at rated load. Ordering Information Typical Part Number B SR4 D 4 012 1. Basic Series: SR4 = 4 pole printed circuit board relay with forcibly guided contacts. 2. Contact Configuration: D = 2 NO + 2 NC contacts M = 3 NO + 1 NC contacts 3. Contact Material: 4 = Silver-tin oxide. 4. Coil Voltage: 005 = 5VDC 009 = 9VDC 015 = 15VDC 021 = 21VDC 036 = 36VDC 048 = 48VDC 085 = 85VDC 006 = 6VDC 012 = 12VDC 018 = 18VDC 024 = 24VDC 040 = 40VDC 060 = 60VDC 110 = 110VDC Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions PC Board Layout (Bottom View) Wiring Diagrams (Bottom Views) 1.57� .51� .051 + .004 DIA. (40) (13) (1.3 + .1) .63� .299 (16) 2 NO + 2 NC (7.6) .130� .256 (3.3) .134 .7106 (6.5) (3.4) (18.05) .197 .197 (5.0) (5.0) 3 NO + 1 NC Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 606 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK SR6 D/M series “Safety Relay” with four forcibly guided contacts and large spacings, improved isolation File E214024 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Insulation Resistance • 2 NO + 2NC or 3NO + 1 NC contacts. 6 Between Mutually Insulated Elements: 10 ohms. • Large spacings for improved isolation. • Well suited for emergency shut-off, machine control, elevator and escalator control, light barrier control Operate Data Must Operate Voltage: See Coil Data table. Contact Data Operate Time /Release Time (typical): 11 ms / 3ms. Type: Single button contact, forcibly guided. Switching Rate: 3,600 ops./hr. max. at rated load. Arrangements: 2 NO + 2NC or 3NO + 1 NC. Material: Silver-tin oxide. Expected Mechanical Life: 10 million operations. Ratings: Environmental Data Current: 8A. Temperature Range: Operating: -20°C to +70°C. Voltage: 250VAC. Vibration (10-200 Hz.): NO: 8g; NC: 5g. Voltage (breaking): 440VAC. Shock (functional) 16ms, half-sine: NO: 8g; NC: 6g. Power (breaking): 2,000VA. Minimum Contact Load: >50mW. Initial Contact Resistance: ≤ 100 millohms/1A/24VDC; ≤ 20 millohms/10mA/5VDC. Mechanical Data Termination: Printed circuit terminals. Enclosure (94 V-0 rated): Sealed (RTIII) plastic case. Weight: 1.06 oz. (30 g) approximately. Initial Dielectric Strength Max. DC Load Breaking Capacity Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 3,000Vrms. Between Contact Sets: 3,000Vrms; 4,000Vrms, in longitudinal direction. Creepage/Clearance: Contact-to-coil: 5.5/5.5mm. Between Contact Sets: 5.5/5.5mm; 12/12mm, in longitudinal direction. Coil Data DC @ 20°C Nominal Coil Power: 800mW. DC Must Nominal Nominal Resistance Operate Drop-out Coil Voltage in VoltageVoltageCurrent VDC Ohms VDC VDC (mA) 5 21 ± 10% 3.8 0.5 238.1 6 30 ± 10% 4.5 0.6 200.0 9 68 ± 10% 6.8 0.9 132.4 Coil Operating Range 12 120 ± 10% 9.0 1.2 100.0 18 270 ± 10% 13.5 1.8 66.7 21 368 ± 10% 15.8 2.1 57.1 24 480 ± 10% 18.0 2.4 50.0 36 1,080 ± 10% 27.0 3.6 33.3 40 1,333 ± 10% 30.0 4.0 30.0 48 1,920 ± 10% 25.0 4.8 25.0 60 3,000 ± 12% 45.0 6.0 20.0 85 6,021 ± 12% 64.0 8.5 14.1 110 10,080 ± 12% 82.5 11.0 10.9 Nominal coil voltage (Un) All values are given for coil without preenergization, at 20°C ambient. At 70°C after preenergization with 1.1 x nominal voltage, the maximum operating voltage is 85% of nominal. At 70°C maximum coil voltage is 1.1 x nominal. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 607 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B SR6 D 4 012 1. Basic Series: SR6 = 4 pole printed circuit board relay with forcibly guided contacts, increased spacing. 2. Contact Configuration: D = 2 NO + 2 NC contacts M = 3 NO + 1 NC contacts 3. Contact Material: 4 = Silver-tin oxide. 4. Coil Voltage: 005 = 5VDC 009 = 9VDC 018 = 18VDC 024 = 24VDC 040 = 40VDC 060 = 60VDC 110 = 110VDC 006 = 6VDC 012 = 12VDC 021 = 21VDC 036 = 36VDC 048 = 48VDC 085 = 85VDC Our authorized distributors are more likely to stock the following items for immediate delivery . None at present. Outline Dimensions PC Board Layouts (Bottom Views) 2.165 MAX.� .65� .051 + .004 DIA. (55) (16.5) (1.3 + .1) .63� (16) .492 .394 2 NO + 2 NC (10) (12.5) .126� (3.2) .096 .886 .709 (2.45) (22.5) (18) .197 .197 (5.0) (5.0) .886 .197 .709 .197 (22.5) (5) (18) (5) .051 + .004 DIA. (1.3 + .1) .492 .394 3 NO + 1 NC (12.5) (10) .096 .925 .669 (2.45) (17) (23.5) .197 .197 (5) (5) Wiring Diagrams (Bottom Views) 2 NO + 2 NC 3 NO + 1 NC Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 608 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK V23050 series SR6 "Safety Relay" - PCB, neutral, monostable relay with six forcibly guided contacts. File E214024 VDE No. 116064 .. TUV Rheinland TUV-Rheinland, No. 945/EZ 116/99 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data @ 23°C Minimum Release Voltage: 10% of nominal voltage. • 4 NO and 2 NC or 3 NO and 3 NC or 5 NO and 1 NC contacts. • Extremely compact. Minimum Operating Voltage @ 70°C: 85% of nominal voltage. • High insulation spacing for the safe separation of the contact circuits. • Sealed case. • Ideal for emergency shut-off, machine control, elevator and escalator Environmental Data control, light barrier control. Temperature Range: -25°C to +70°C. Solder Bath Temp./Max. Duration: 260°C/5s. Contact Data @ 23°C Type: Single button contacts, forcibly guided. Mechanical Data Arrangements: 3 NO and 3 NC, 4 NO and 2 NC or 5 NO and 1 NC. Material: Silver nickel alloy. Termination: Printed circuit terminals. Max. Continuous Current at Max. Amb. Temp.: 8A, 1 contact loaded. Enclosure (UL94V-2 Flammability Ratings): Sealed (RTIII) plastic case. Max. Switched Voltage: 400VAC/VDC. Weight: 1.01 oz. (30g). Max. Switched Power: 2,000VA. Max. Switching Rate: 6 operations/min. at rated load. 600 operations/min. at minimum load. Minimum Load: 50mW. Max. DC Load Breaking Capacity Initial Contact Resistance: 100 mΩ - 1A/24VDC. 7 Expected Mechanical Life: 10 operations. Electrical Life: 250VAC, 70°C ambient, 1 NO loaded with 8A and 1 NC loaded with 5A: 75,000 operations. Initial Dielectric Strength Between Open Contacts: 1,000VAC rms. Between Adjacent Contacts: 3,000VAC rms. Between Coil and Contacts: 3,000VAC rms. Coil Data @ 23°C Voltage: 5 to 110VDC. Nominal Power: 1.2W. Max. Coil Temperature: 130°C. Duty Cycle: Continuous. Coil Operating Range Coil Data @ 23°C Rated Coil Coil Must Operate Nominal Voltage Resistance Voltage Coil Current (VDC) (Ohms) (VDC) (mA) 5 21 ± 2 3.75 240 6 30 ± 3 4.5 200 9 68 ± 7 6.8 130 12 120 ± 12 9.0 100 18 270 ± 27 13.5 70 Nominal coil voltage (Un) 21 370 ± 40 15.8 60 24 480 ± 50 18.0 50 40 1,330 ± 130 30.0 30 60 3,000 ± 300 45.0 20 85 6,020 ± 600 64.0 14 110 10,000 ± 1,000 82.5 11 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 609 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B V23050 A1 012 A 5 33 1. Basic Series: V23050 = SR6 safety relay. 2. Enclosure: A1 = Sealed. 3. Coil Voltage: 005 = 5VDC 006 = 6VDC 009= 9VDC 012 = 12VDC 021= 21VDC 024= 24VDC 040 = 40VDC 060= 60VDC 085 = 85VDC 110 = 110VDC 4. Contact Type: A = Single contact. 5. Contact Material: 5 = Silver nickel. 6. Contact Arrangement: 33 = 3 NO and 3 NC. 42 = 4 NO and 2 NC. 51 = 5 NO and 1 NC. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions 2.17 MAX. .65 MAX. (55.0) (16.5) .126 .63 MAX. (3.2) (16.0) Wiring Diagrams (Bottom Views) 3 NO and 3 NC 4 NO and 2 NC 5 NO and 1 NC A2 A2 A2 22 21 41 44 61 64 22 21 41 44 61 64 21 24 41 44 61 64 12 11 31 34 51 54 12 11 32 31 51 54 12 11 31 34 51 54 A1 A1 A1 Suggested PC Board Layouts (Bottom Views) 3 NO and 3 NC, 4 NO and 2 NC 5 NO and 1 NC .051 +.004 .197 ş .051 .197 (1.3 + 0.1) ∅ (5.0) (1.3) (5.0) .197 (5.0) .256 .886 .256 .197 (6.5) .49 .394 (22.5) (6.5) (5.0) (12.5) (10) .492 .394 (12.5) (10.0) .197 .197 (5.0) (5.0) .888 .256 .236 .096 .925 .197 (6.0) (22.5) (6.5) (2.45) .256 (23.5) (5.0) .096 .236 (6.5) (2.45) (6.0) .197 .197 (5.0) (5.0) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 610 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK SR6 Sensitive series Sensitive “Safety Relay” with six forcibly guided contacts. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Insulation Resistance • 4 NO + 2NC, 3 NO + 3 NC or 5 NO + 1 NC contacts. 6 Between Mutually Insulated Elements: 10 ohms. • Polarized, 800mW coil. • 6 kV surge resistance between poles. • Well suited for emergency shut-off, machine control, elevator and escalator control, light barrier control Contact Data Operate Data Type: Single button contact, forcibly guided. Must Operate Voltage: See Coil Data table. Arrangements: 4 NO + 2NC, 3 NO + 3 NC or 5 NO + 1 NC. Operate Time /Release Time (typical): 11 ms / 3ms. Material: Silver-tin oxide. Switching Rate: 3,600 ops./hr. max. at rated load. Expected Mechanical Life: 10 million operations. Ratings: Current: 8A. Voltage: 250VAC. Voltage (breaking): 440VAC. Power (breaking): 2,000VA. Environmental Data Minimum Contact Load: >50mW. Initial Contact Resistance: ≤ 100 millohms/1A/24VDC; Temperature Range: Operating: -20°C to +70°C. ≤ 20 millohms/10mA/5VDC. Vibration (10-200 Hz.): NO: 8g; NC: 5g. Shock (functional) 16ms, half-sine: NO: 8g; NC: 6g. Initial Dielectric Strength Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 3,000Vrms. Between Contact Sets: 3,000Vrms. Mechanical Data Creepage/Clearance: Contact-to-coil: 5.5/5.5mm. Termination: Printed circuit terminals. Between Contact Sets: 5.5/5.5mm. Enclosure (94 V-0 rated): Sealed (RTIII) plastic case. Weight: 1.06 oz. (30 g) approximately. Coil Data DC @ 20°C Nominal Coil Power: 800mW. DC Must Nominal Max. DC Load Breaking Capacity Nominal Resistance Operate Drop-out Coil Voltage in VoltageVoltageCurrent VDC Ohms VDC VDC (mA) 5 31 ± 10% 3.8 0.5 161.3 6 45 ± 10% 4.5 0.6 133.3 9 101 ± 10% 6.8 0.9 89.1 12 180 ± 10% 9.0 1.2 66.7 15 281 ± 10% 11.3 1.5 53.4 18 405 ± 10% 13.5 1.8 44.4 21 551 ± 10% 15.8 2.1 38.1 24 720 ± 10% 18.0 2.4 33.3 36 1,620 ± 10% 27.0 3.6 22.2 40 2,000 ± 10% 30.0 4.0 20.0 48 2,880 ± 10% 25.0 4.8 16.7 All values are given for coil without preenergization, at 20°C ambient. At 70°C after preenergization with 1.1 x nominal voltage, the maximum operating voltage is 85% of nominal. At 70°C maximum coil voltage is 1.1 x nominal. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 611 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B SR6 A 4 S 012 1. Basic Series: SR6 = 6 pole printed circuit board relay with forcibly guided contacts. 2. Contact Configuration: A = 3 NO + 3 NC contacts B = 4 NO + 2 NC contacts C = 5 NO + 1 NC contacts 3. Contact Material: 4 = Silver-tin oxide. 3. Coil Type: S = Sensitive coil. 5. Coil Voltage: 005 = 5VDC 009 = 9VDC 018 = 18VDC 024 = 24VDC 040 = 40VDC 060 = 60VDC 110 = 110VDC 006 = 6VDC 012 = 12VDC 021 = 21VDC 036 = 36VDC 048 = 48VDC 085 = 85VDC Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) 2.17 MAX. .65 MAX. (55.0) (16.5) A2 22 21 41 44 61 64 3 NO + 3 NC .126 .63 MAX. 12 11 32 31 51 54 A1 (3.2) (16.0) PC Board Layouts (Bottom Views) A2 22 21 41 44 61 64 4 NO + 2 NC .051 .197 12 11 31 34 51 54 ∅ A1 (1.3) (5.0) 3 NO + 3 NC .49 .394 and (12.5) (10) 4 NO + 2 NC .197 .197 (5.0) (5.0) .096 .888 .256 (22.5) (6.5) (2.45) .256 A2 21 24 41 44 61 64 (6.5) 5 NO + 1 NC 12 11 31 34 51 54 A1 .051 +.004 .197 ş (1.3 + 0.1) (5.0) .197 (5.0) .256 .886 .256 .197 (6.5) (22.5) (6.5) (5.0) .492 .394 5 NO + 1 NC (12.5) (10.0) .236 .925 .197 (6.0) (23.5) (5.0) .096 .236 (2.45) (6.0) .197 .197 (5.0) (5.0) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 612 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK SR6 Z series 6-pole “Safety Relay” on DIN-rail module. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data DC @ 20°C • 6-pole SR6 relay mounted to PC board on DIN-rail module. Nominal DC Voltage: 24VDC. • AC/DC input. Nominal AC/DC Voltage: 24, 115VAC/VDC. • Spring connectors. Nominal AC Voltage: 230VAC. • Module is 1.81 in (46mm) wide. Minimum Operating Voltage: 90% of nominal. • Well suited for emergency shut-off, machine control, elevator and Minimum Release Voltage: ≤10% of nominal. escalator control, light barrier control Maximum Operating Voltage: 110% of nominal. Input Circuit: Bridge rectifier, series resistor. Contact Data Type: Single button contact, forcibly guided. Operate Data Arrangements: 4 NO + 2NC, 3 NO + 3 NC or 5 NO + 1 NC. Switching Rate: 3,600 ops./hr. max. at rated load. Material: Silver-tin oxide. Expected Mechanical Life: 10 million operations. Ratings: Environmental Data Current: 8A. Voltage: 250VAC. Temperature Range: Operating: -20°C to +50°C. Voltage (breaking): 440VAC. Power (breaking): 2,000VA. Minimum Contact Load: >50mW. Mechanical Data Initial Contact Resistance: ≤ 100 millohms/1A/24VDC; ≤ 20 millohms/10mA/5VDC. Termination: Spring clamp connections. Acceptable Wire Sizes: 14 - 18 AWG.. Weight: 3.17 oz. (90 g) approximately. Initial Dielectric Strength Ordering Information Between Open Contacts: 1,000Vrms. Between Coil and Contacts: 3,000Vrms. Typical Part Number B SR6Z A 024 Between Contact Sets: 2,000Vrms. 1. Basic Series: Creepage/Clearance: Contact-to-coil: 5.5/5.5mm. SR6Z = 6 pole relay with forcibly guided Between Contact Sets: 3/3mm. contacts on DIN-rail module. 2. Contact Configuration: A = 3 NO + 3 NC contacts Outline Dimensions B = 4 NO + 2 NC contacts C = 5 NO + 1 NC contacts 5. Coil Voltage: Module width: 1.81 in (46 mm). 024 = 24VDC 524 = 24VAC/VDC Module length: 3.42 in (87 mm). 615 = 115VAC/VDC 730 = 230VAC Mounted height: 2.12 - 2.28 in. (54 - 58 mm) depending upon DIN rail. Distributors are more likely to stock the following items. Module fits mounting rails per DIN EN 50022 or DIN EN 50035. None at present. Wiring Diagrams (Bottom Views) DC Module, 5 NO + 1 NC AC/DC Module, 3 NO + 3 NC DC Module, 4 NO + 2 NC DC Module, 3 NO + 3 NC AC/DC Module, 4 NO + 2 NC AC/DC Module, 5 NO + 1 NC Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 613 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Engineering Notes Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 614 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PLUG-IN / PANEL MOUNT RELAYS Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 0419 .......................... Relay w/Dust Cover .......................... 745 K10 ............................ Relay w/Dust Cover .......................... 720 KA.............................. Open Relay ....................................... 737 KH/KHA ..................... Relay w/Dust Cover .......................... 709 Transformers.............................. 201-212 2 KHS ........................... Hermetically Sealed Relay ................ 709 KRP–3–H ................... Relay w/Dust Cover .......................... 739 KR–E.......................... Hermetically Sealed Relay ................ 737 Low-signal PC Board Relays. 301-336 3 KRP/KRPA ................. Relay w/Dust Cover .......................... 737 KU/KUP ..................... Open Relay or Relay w/Dust Cover .. 723 NOTE: A question tree that may help you in selecting an KUE/KUEP ................. Open Relay or Relay w/Dust Cover .. 723 appropriate relay for your application can be found on the next page. Mid-Range PC Board Relays ....... 19-21 KUGP......................... Relay w/Dust Cover .......................... 723 4 KUIP .......................... Relay w/Dust Cover .......................... 723 KUM/KUMP............... Open Relay or Relay w/Dust Cover .. 723 KUP93 ....................... Relay w/Dust Cover .......................... 731 Power PC Board Relays ................ 22-35 5 MT ............................. Relay w/Dust Cover .......................... 742 PCL/PCLH ................. Relay w/Dust Cover .......................... 713 PT .............................. Relay w/Dust Cover .......................... 717 Relays with R10-R ........................ Immersion-Cleanable Relay .............. 703 6 Forcibly-Guided Contacts.............. 36-79 R10 ............................ Relay w/Dust Cover .......................... 703 RM ............................ Relay w/Dust Cover .......................... 733 Plug-in/Panel Mount Socket Usage Guide............................................................. 749 7 General Purpose Relays ........ 701-752 Track Mount System ............................................................ 747 Power Relays & Definite 8 Mature Products Purpose Contactors...................... 89-131 Some mature product series are no longer described in the technical databook, as they no longer represent the most effec- tive solution for many new design requirements. However, Latching, Impulse & certain models within these series are currently available, in 9 Rotary Relays ...............................149-154 varying quantities, for retrofit applications. Some of these prod- ucts are scheduled for obsolescence or discontinuance in the near future. Contact technical support (see inside back cover) for NOTE: Many of the relay products described in this section are suggestions regarding alternate products which may be appropri- Automotive Relays ......................141-148 10 also available with printed circuit board terminals as an ate for your application. option. Solid State Relays & 11 Input/Output Modules ................195-207 Time Delay Relays & 12 Counters ........................................208-232 Sensors & Monitors ...................233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 701 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PLUG-IN / PANEL MOUNT RELAYS Plug-in / Panel Mount General Purpose (≤20A) Relay Question Tree This guide helps the user select one or more relay series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, the user must assume ultimate responsibility for determining the suitability of a relay for a particular application. Several relay product families are quite broad (i.e., R10, KU), and only the basic family designator, not the actual product series designator (i.e., R10S, KUIP) is listed in this guide. Contact Switch Rating? 0 to 3 3 to 10 10 to 20 amps* amps* amps* AC or DC AC or DC AC or DC Coil? Coil? Coil? AC DC AC DC AC DC Coil Coil Coil Coil Coil Coil Number Number Number Number Number Number of Poles? of Poles? of Poles? of Poles? of Poles? of Poles? One Two + One Two + One Two + One Two + One Two + One Two + Pole Poles Pole Poles Pole Poles Pole Poles Pole Poles Pole Poles R10 KHA R10 KHA KA 0419 KA 0419 KA K10 KA K10 KRPA K10 KRPA K10 R10 R10 KRPA KA KRPA KA KR-3 KA KR-3 KA KU KHA KU KHA KU KRPA KU KRPA PCLH KRPA PCLH KRPA PCLH KU PCLH KU R10 KU R10 KU PCLH PCLH MT MT RM RM PCLH PCLH PT PT R10 R10 RM RM * Typical loads at 28VDC or 120VAC, resistive, for comparison purposes. See catalog pages for a given series for detailed rating specifications. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 702 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B R10 series General Purpose Dry Circuit to 7.5 Amp Multicontact AC or DC Relay • R10-E – Clear Dust Cover Version • R10-R – Sealed, Immersion Cleanable Type • R10S – Super Sensitive, Logic Compatible File E29244 File LR15734 R10 R10-R R10S Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Capacitance • Broad range of coil options provide sensitivity ranging from 25 to 750mW. Between Contacts: 2 pf, typ. • Various contacts switch from dry circuit to 7.5 amps. Between Contacts and Coil: 2 pf, typ. • Many mounting and termination options. Between Coil and Frame: 30 pf, typ. Initial Insulation Resistance Contact Data @ 25°C 10 Between Mutually Insulated Elements: 10 ohms @ 25°C, 50% RH. 12 Arrangements: 1 Form C (SPDT) through 8 Form C (8PDT) See Ordering Consult factory for optional acetal resin material rated 10 ohms. Information tables for more details regarding availability. Coil Data @ 25°C (also see Coil Data tables) Contact Materials, Styles & Ratings @ +25°C Voltage: 3 to 115VDC and 6 to 115VAC. Maximum Coil Power: 2.2 Watts. Contact Contact Contact Coil Codes Contact Ratings Coil Temperature Rise: 30°C per Watt. Code Material Style Available Min. Typ. Max. Maximum Coil Temperature: 105°C. W Silver-Cadmium Oxide Single Button V, Q, S, J 500mA - 7.5A‡ X Silver-Cadmium Oxide Single Button V, Q, S, J 500mA - 5A§ Operate Data @ 25°C Y Fine Silver Single Button All 100mA 2A 3A Z Fine Silver Bifurcated All 1mA 100mA 2A R10 Relays (DC Only) Typical Ranges of Operations P Gold overlay on Silver Bifurcated Crossbar All Dry Circuit 1mA 3A (Curves for reference only. If specific values are required, testing is required.) Ratings are at 28VDC or 155VAC unless otherwise specified. Total load must not 30 12 exceed 30A per relay. ‡ Use ungrounded frame for AC loads of 5A or greater. Max.ratings are 7.5A at 115VAC and 25 Typical Operate 10 4A at 28VDC for coil codes S and J. and Release Time § Use ungrounded frame for AC loads of 5A or greater. Max.ratings are 5A at 115VAC and 3A (all contact configurations) at 28VDC for coil codes S and J. 20 8 UL Horsepower Contact Ratings (Coil Code V Only) 15 6 Contact Code No. of Poles At 110-120VAC At 220-240VAC Release Time W 1, 2, 4 1/8 HP (3.8A) 1/6 HP (2.2A) (no suppression) 10 4 X 1, 2, 4, 6 1/20 HP (1.5A) 1/10 HP (1.5A) 5 2 Expected Mechanical Life: 100 million operations, typical. (Except contact Operate Time Code W: 1,000,000 operations, typical.) 1.0 1.33 1.5 2.0 2.5 3.0 Typical Expected Life For Resistive Loads @ 25°C Multiple of Max. Pull-In Voltage or Current Type Current Voltage Contact Style Coil Code Operations†† 4 R10 Ultra-Sensitive "SS" and "JJ" Typical Ranges of Operation R10 7.5A 120VAC, 60 Hz. W V,S,J 7.5 · 10 4 R10 7.5A 28VDC W V 7.5 · 10 (Curves for reference only. If specific 4 R10 5.0A 120VAC, 60 Hz. X V,S,J 5 · 10 values are required, testing is required.) 4 R10 5.0A 28VDC X V 5 · 10 50 10 4 R10 4.0A 28VDC W S,J 2 · 10 4 R10 3.0A 28VDC X S,J 2 · 10 Typical Operate 4 R10 3.0A 28VDC or 120VAC P V,S,J 3 · 10 and Release Times 8 40 6 R10 2.0A 28VDC P,Y,Z V 1.5 · 10 (all contact configurations) 5 R10 2.0A 28VDC P,Y,Z S,J 6 · 10 5 R10S 2.0A 28VDC P,Y,Z J 5 · 10 30 6 6 R10 1.0A 28VDC P,Y,Z V,S,J 12 · 10 5 Release Time R10 1.0A 28VDC P,Y,Z SS,JJ 5 · 10 6 (no suppression) R10S 1.0A 28VDC P,Y,Z J 1 · 10 20 4 6 R10 500mA 28VDC P,Y,Z SS,JJ 5 · 10 8 R10 100mA 28VDC or 120VAC P,Y,Z V,S,J 1 · 10 6 R10 100mA 48VDC P,Z SS,JJ 5 · 10 10 2 Operate Time 7 R10 100mA 6VDC P SS,JJ 5 · 10 6 R10S 100mA 28VDC or 120VAC P,Y,Z J 1 · 10 7 R10 50mA 6VDC P,Z V,S,J 5 · 10 1.0 1.5 2.0 3.0 4.0 6 R10S 30mA 6VDC P,Z J 5 · 10 7 R10 1mA 6VDC P SS,JJ 5 · 10 Multiple of Max. Pull-In Voltage or Current †† Relay operated at rated coil voltage or 133% of pick-up current or higher. Environmental Data Storage Temperature Range: -55°C to +105°C. Initial Dielectric Strength Operating Temperature Range: -55°C to +75°C. Between Open Contacts: 500V rms, for contact codes P and Z. Mechanical Data 1,000V rms for contact codes W, X and Y with coil code V. Terminal Finish: Tin plating standard. Between All Other Conductors: 1,000V rms. Weight: 0.8 to 1.4 oz. (23 to 40g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 703 specified. Refer to inside back cover. Operate Time (Milliseconds) Operate Time (Milliseconds) Release Time (Milliseconds) Release Time (Milliseconds) Catalog 1308242 Issued 3-03 P&B Coil Data Tables @ 25°C One of the boldface resistance or voltage values from a table below is to be inserted in step 6 of the ordering chart on the next page. V Standard DC Voltage Adjustment J Sensitive DC Current Adjustment 2.2 Watts Maximum Continuous Coil Dissipation @ 25°C Must Operate Current (mA) Coil Resistance All Applicable Types Except R10S VDC at 25°C at 25°C ± 10% (ohms) Coil 2 Form A, 4 Form A, 6 Form A, 8 Form A, Max. 1, 2 & 4 Form 6 Form A, 8 Form A, Resistance B, C or D B, C or D B, C or D B or C Coil A, B, C or D B or C B or C ±10% Pick-up Pick-up Pick-up Pick-up Current Nominal Pick-up Pick-up Pick-up Pick-up (ohms) 85mW 175mW 250mW 400mW (mA) (Max.) 500mW 850mW 1000mW 1.0K 8.5 13.0 16.0 20.0 45.0 3.0 2.25 10 6 5 2.5K 5.8 8.4 10.0 13.0 28.0 5.0 3.75 28 16 14 5.0K 4.1 6.2 7.2 9.0 20.0 6.0 4.5 52 25 20 10.0K 3.1 4.5 5.0 6.4 14.0 12.0 9.0 185 90 72 15.0K 2.6 3.5 4.2 5.3 11.5 24.0 18.0 700 430 350 30.0K 1.7 2.5 2.9 3.7 8.3 48.0 36.0 2.5K 1.5K 1.25K R10S Types Only 72.0 54.0 5.8K 3.5K 2.8K 115.0 86.0 15.0K 9.0K 8.0K Coil 1 2 4 Resistance Form C Form C Form C ±10% Pick-up Pick-up Pick-up (ohms) 10mW 20mW 40mW 500 4.5 (A) 6.3 (A) 9.0 1.0K 3.2 (A) 4.5 6.5 2.5K 2.0 2.9 (B) 4.1 (B) 5.0K 1.4 (B) 2.0 2.9 (C) Q Special DC Voltage Adjustment 10.0K 1.0 1.4 (C) 2.0 16.0K 0.8 1.2 1.4 1 & 2 Form A, B, C or D 3 & 4 Form A, B, C or D 30.0K 0.6 (C) 0.8 1.2 Coil Res. Pick-up Coil Res. Pick-Up Nominal @ 25°C (Max.) Pick-up @ 25°C (Max.) Pick-Up Voltage (A) Suggested for 5VDC operation. ± 10% @ 25°C@ 25°C ± 10% @ 25°C@ 25°C@ 25°C (B) Suggested for 12VDC operation. (ohms) (VDC) (mW) (ohms) (VDC) (mW) (VDC) (C) Suggested for 24VDC operation. 52 3.1 180 32 3.8 450 5 110 4.5 185 52 4.2 340 6 450 9.2 190 185 8.4 380 12 JJ Ultra-Sensitive Current Adjustment 1.8K 17.4 170 1.0K 17.2 295 24 (1-4 Pole Only) 7.5K 36.2 175 3.2K 31.1 300 48 Maximum Pick-Up Current (mA) 15.0K 49.5 165 7.5K 49.3 325 72 30.0K 67.5 160 15.0K 67.5 300 115 Coil 1 Form C 2 Form C 3 & 4 Form C Maximum Resistance Pick-Up Pick-Up Pick-Up Continuous at 25°C Power Power Power Coil Current ±10% 20mW 40mW 80mW (mA) 1.0K 4.5 6.5 9.0 45.0 2.5K 2.9 4.1 5.8 28.0 5.0K 2.1 2.9 4.1 20.0 10.0K 1.5 2.0 3.0 14.0 15.0K 1.2 1.7 2.4 11.5 S Sensitive DC Voltage Adjustment 30.0K 0.85 1.2 1.7 8.3 2.2 Watts Maximum Continuous Coil Dissipation @ 25°C Coil Resistance VDC at 25°C at 25°C ± 10% (ohms) 1 & 2 Form 3 & 4 Form A, 6 Form A, 8 Form A, Standard AC Operated Relays A, B, C or D B, C or D B or C B or C Coil Resistance Nominal Pick-up Pick-up Pick-up Pick-up Pick-up @ 25°C ± 20% (ohms) Volts AC @ 25°C (Max.) 100mW 175mW 250mW 400mW Pick-Up Maximum 3.0 2.25 50 30 20 12 2 & 4 Form C 6 & 8 Form C (max.) Nominal Continuous 5.0 3.75 140 80 56 35 6.0 4.5 200 110 80 52 25 15 5.0 6 7.2 12.0 9.0 800 450 320 200 120 90 9.0 12 14.5 24.0 18.0 3.2K 1.8K 1.2K 800 500 350 18.0 24 30.0 48.0 36.0 13.0K 7.5K 5.2K 3.2K 2.0K 1.4K 36.0 48 60.0 72.0 54.0 28.0K 16.0 13.0K 7.5K 9.0K 7.5K 86.0 115 130.0 115.0 86.0 50.0K 40.0K 30.0K 16.0K Note: Dual coil diode rectified construction. Typical Coil Inductance 500 SS Ultra-Sensitive Voltage Adjustment (1-4 Pole Only) 2.2 Watts Maximum Continuous Coil Dissipation @ 25°C 100 Coil Resistance 50 VDC at 25°C at 25°C ± 10% (ohms) 1 Form C 2 Form C 3 & 4 Form C, Pick-up Pick-up Pick-up 10 Nominal Pick-up Power Power Power Armature (open) (Max.) 20mW 40mW 80mW Armature (closed) 3.0 2.25 220 110 52 5.0 3.75 700 350 175 1.0 6.0 4.5 1.0K 500 250 12.0 9.0 4.0K 2.0K 1.0K 0.5 18.0 13.5 9.0K 4.5K 2.2K 24.0 18.0 15.0K 7.5K 3.7K 36.0 27.0 30.0K 15.0K 7.5K 0.1 48.0 36.0 — 30.0K 15.0K 10 50 100 500 1K 5K 10K 100K Coil Resistance (Ohms) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 704 specified. Refer to inside back cover. Coil Inductance (Henrys) Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B R10 -E 1 Y 4 -V700 1. Basic Series: R10 = Relay with Form C contacts. R10S = Super sensitive R10 (case and terminals E1 & E2 only, J coil adj. only). 2. Case Style: E = Non-sealed polycarbonate cover. R = Immersion cleanable, tape sealed plastic case (R10 only [Form C], terminal code 2 & 9 only [std. PCB]). No ground or stud included. Not available on R10S. 3. Terminals & Mounting: 1 = Solder/plug-in terminals with #3-48 mounting stud. 2 = Printed circuit terminals (std.) .064” (1.62mm) clearance, 1.25” (31.75mm) seated ht. 6 = Side mounting plate with #6-32 stud, solder/plug-in terminals (#3-48 stud not included). 7 = Narrow (.04” [1.02mm] wide) printed circuit terminals .013” (.33mm) clearance, 1.2” (30.48mm) seated ht. 9 = Non-shouldered, narrow (.04” [1.02mm] wide) printed circuit terminals in a staggered arrangement (1 to 6 poles only). 4. Contact Style & Rating: WX Y Z P Single Contact Single Contact Single Contact Bifurcated, Low Bifurcated Crossbar, V, Q, S & J Coil Adjustment Only Level Contacts Dry Circuit Contacts Typ. 2A Typ. 100mA Typ. 1mA Max. 7.5A† Max. 5A‡ Max. 3A Max. 2A Max. 3A Min. 500mA Min. 500mA Min. 100mA Min. 1mA Min. Dry Circuit R10 X XXXX R10S X X X Ratings are at 28VDC or 115VAC. Total load must not exceed 30A per relay. † Use ungrounded frame for AC loads of 5A or greater. Max. ratings are 7.5A at 115VAC and 4A at 28VDC for coil codes S & J. ‡ Use ungrounded frame for AC loads of 5A or greater. Max. ratings are 5A at 115VAC and 3A at 28VDC for coil codes S & J. 5. Number of Poles: 1 = 1 pole. 4 = 4 pole 2 = 2 pole. 6 = 6 pole (not available with W contacts). 3 = 3 pole. 8 = 8 pole (available on case style E only; not available with W contacts). 6. Coil (Refer to Coil Data Tables): AC Voltage (available on R10 only) DC Voltage Specify nominal coil voltage followed by V (example: 24V). Specify coil adjustment code letter followed by coil resistance (example: V700). Our authorized distributors are more likely to stock the following items for immediate delivery. R10-E1P2-115V R10-E1X2-24V R10-E1Y2-J1.0K R10-E1Y4-V700 R10-E2P4-V185 R10-E2Y4-V185 R10-E1P2-V700 R10-E1X2-S800 R10-E1Y6-V1.5K R10-E1Y2-J2.5K R10-E2P4-V700 R10-E2Y4-V700 R10-E1P4-115V R10-E1X2-V185 R10-E1Y2-V15.0K R10-E1Z2-V185 R10-E2W2-V185 R10S-E1Y2-J5.0K R10-E1P4-V700 R10-E1X2-V700 R10-E1Z2-V700 R10-E1Y2-V185 R10-E2X2-V185 R10S-E2Y1-J1.0K R10-E1W2-V185 R10-E1X4-115V R10-E1Y2-V2.5K R10-E1Z4-V185 R10-E2X2-V700 R10-E1W2-V700 R10-E1X4-V185 R10-E1Z4-V2.5K R10-E1Y2-V700 R10-E2X4-V185 R10-E1W4-V185 R10-E1X4-V2.5K R10-E1Y4-J10.0K R10-E1Z4-V700 R10-E2X4-V700 R10-E1W4-V700 R10-E1X4-V700 R10-E1Z6-V1.5K R10-E1Y4-V2.5K R10-E2Y2-V185 R10-E1X2-115V R10-E1X6-V430 R10-E1Y4-V52 R10-E1Z6-V430 R10-E2Y2-V700 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 705 specified. Refer to inside back cover. � � Catalog 1308242 Issued 3-03 P&B Outline Dimensions 1.187 MAX. (30.15) R10S: 1.50 MAX. .735 MAX. CASE R ONLY (38.1) (18.67) Recommend tape tab CASE E be removed after ONLY immersion cleaning 2 POLE .950 MAX. (24.13, 2 POLE 1R10) and before relay is put 4 POLE 1.165 MAX. .406 in service. Peel off to (29.59, 4 POLE 1R10) (10.31) .085 MAX. permit proper relay 6 POLE 1.375 MAX. (2.16) (34.93) ventilation. 8 POLE 1.580 MAX. .135 (40.13) (3.43) .171 .354 (4.43) TYPE E6 ONLY (8.99) .210 .156 .375 (5.33) (3.96) 3-48 THREAD (9.53) #6-32 TYPE E1 ONLY } NIB .091 DIA. x .020 HIGH THREAD (2.31) (.51) TYPE E6 ONLY .59 REF. .437 (15.0) (11.10) STUD ON NARROW SIDE ONLY PC Terminal Dimensions A B C D Arrang. Type 2 .131 .050 .064 1.251 Inline Solder Terminal Dimensions Type 7 .131 .040 .013 1.20 Inline .090 (2.29) Type 9 .170 .040 .000 1.187 Staggered .040 (1.02) Thickness .012 012 .012 .013 ––– .012 B .080 (.30) (2.03) C A D (TO TOP OF CASE) Wiring Diagrams (Bottom Views) R10 Wiring Diagrams R10-AC Wiring Diagram 28 15 16 26 27 14 22 12 13 25 12 13 20 21 11 23 24 11 DUAL 16 9 10 COIL 16 9 10 19 9 10 22 9 10 14 15 8 14 15 8 20 21 8 17 18 8 10 6 7 10 6 7 13 6 7 13 6 7 16 6 7 19 6 7 8 9 5 8 9 5 11 12 5 11 12 5 14 15 5 17 18 5 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 4 3 2 1 1 POLE 2 POLE 3 POLE 4 POLE 6 POLE 8 POLE Suggested PC Board Layouts (Component Side of Boards) Suggested Panel Cutout For Relay or Socket Terminal Types E2 & R2 Terminal Types E9 & R9 Mounting Hole Layout 2 HOLES .500 ± .010 + .005 TOLERANCE: For Terminal & Mounting (12.70) .109 DIA. (± .25) .210 – .000 .740 Style 6 .100 (5.33) + .13 (18.80) 2.77 (2.54) ( ) .530 – .00 .420 .187 ± .002 DIA. X .320 6 GRID (13.46) (10.67) (4.75 ± .05) (8.13) POLE .400 .550 4 .110 .630 .437 (10.16) .500 2 (13.97) POLE (2.79) (16.00) .281 (11.10) (12.70) POLE .140 .281 ± .015 .354 (7.14) HOLES (3.56) (7.14 ± .38) (8.99) HOLES + .004 .656 ± .015 DIA. .056 .450 + .004 .150 - .000 .056 DIA. .100 (16.66 ± .38) (11.43) - .000 (3.81) + .10 (2.54) 1.42 .147 ± .002 DIA. ( ) .450 + .10 X = 2 POLE – .343 ± .020 - .00 1.42 ( ) (3.73 ± .05) (11.43) - .00 (8.71 ± .51) 4 POLE – .562 ± .020 (14.27 ± .51) 6 POLE – .781 ± .020 (19.84 ± .51) 8 POLE – 1.000 ± .020 (25.40 ± .51) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 706 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B R10 Socket & Accessory Information Ordering Data – Stock items are boldfaced. Socket No. of Type of Grounding All tolerances ±.010 (±.25) unless otherwise noted. Part No. Poles Terminal Provision Suggested Panel Cutout 2 POLE .343 (8.71) 4 POLE .562 (14.27) 27E125 2 Strip 6 POLE .781 (19.84) .281 8 POLE 1.000 (25.40) (7.14) 27E126 4 Strip Socket Specifications 27E127 6 Solder Strip Contact Material: 2 HOLES ++ 27E162 2 None Spring brass, tin-plated. .109 DIA. 27E163 4 None (2.77) Body Material: 2 and 4 pole: polyester. .140 27E164 6 None (3.56) 6 and 8 pole: phenolic. .354 .281 ± .015 (8.99) (7.14 ± .38) Voltage Drop: 30mV max. @ 10A. .656 ± .015 Dielectric Strength: 1,000V rms. (16.66 ± .38) 9 Insulation Resistance: 10 megohms. Suggested Board Layout (Component Side) 27E128 2 Strip Max. Current: 10A. 27E129 4 Strip .500 6 Solder or PC Terminal Sockets 27E130 6 Strip (12.70) POLE Rugged, molded socket body retains floating 27E254 8 Strip .100 terminals of either solder or printed circuit pin 27E212 2 PC Stag. None 8 (2.54) configuration. PC terminal sockets are offered POLE 27E213 4 .180” long None GRID 4 with pins in either 0.1” (2.54mm) grid or in-line 27E271 6 (4.57mm) None POLE arrangement. 27E258 8 None .500 2 27E193 2 Terminal (12.70) POLE Grounding Provisions 27E194 4 Terminal HOLES Pre-installed on sockets .100 + .004 .150 27E636 2 PC Stag. Strip (2.54) .056 DIA. Not for use at 5A AC and above. - .000 (3.81 27E637 4 .210” long Strip .450 Grounding Strip: Mounting stud of relay HOLE FOR GROUND + .10 ) 1.42 (11.43) ( ) (5.33mm) TERMINAL (IF REQ’D.) - .00 contacts grounding strip. Grounding strip is grounded with screw or rivet through round hole in socket. 27E631 2 Strip Suggested Board Layout (Component Side) .400 Grounding Terminal (PC sockets only): 27E632 4 Strip (10.16) Mounting stud of relay contacts ground terminal 27E340 6 PC In-line Strip .110 through square hole in socket. (2.79) 27E342 2 .180” long None .530 27E629 4 (4.57mm) None .420 .320 (13.46) (10.16) Strip Terminal 27E630 6 None (8.13) 27E338 4 Terminal .550 .450 .210 (13.97) (11.43) 27E633 2 PC In-line Strip (5.33) + .004 27E634 4 .210” long Strip .050 DIA. .056 - .000 (1.27) 27E635 6 (5.33mm) Strip .150 + .10 1 HOLE (3.81) 1.42 .450 ( ) - .00 (11.43) DIA. HOLES Caution: Hold Downs For Use With R10 Sockets Hold Down Spring Hold Down Strap Printed circuit sockets are manufactured with Part No. No. of (PC Sockets Only) “floating” (loose) terminals. This permits them to Poles Description align with holes in the circuit board and with the relay terminals. During the mounting and 20C249 2 Wire Hold Down Spring soldering of the socket, vertical float should be 20C250 4 Wire Hold Down Spring eliminated and the terminals seated on the board. 20C251 6 Wire Hold Down Spring (This may be accomplished by inserting a dummy 20C266 8 Wire Hold Down Spring relay in the socket.) Failure to eliminate float may 20C259 All Wire Hold Down Strap (PC only) cause fracture of the solder joint or separation of 20C300 2 (R10S) Hold Down Spring the copper conductor from the printed circuit 20C301 4 (R10S) Hold Down Spring board when a relay is inserted in the socket after See following page for additional sockets & accessories. soldering. 37D645 – Mounting Strip Solder & PC Terminal Socket Outline Dimensions Strip of .060” (1.52mm) aluminum contains ten pre-punched, breakaway mounting plates. Each plate accomodates a 2, 4, 6 or 8 pole solder terminal 2 POLE .978 (24.84) .175 4 POLE 1.184 (30.07) (4.45) .750 R10 relay or socket to facilitate chassis- or rack mounting. 6 POLE 1.390 (35.31) (19.05) 8 POLE 1.546 (40.54) .210 .535 1.205 .350 A (5.33) (13.59) (30.61) .090 R. 1.205 (8.89) (2.29) .25 (30.61) .13 (6.4) (3.3) .032 .065 .330 (.81) (1.65) (8.38) B .090 “A” = .109 DIA. .235 (2.29) 2.000 (2.77) .045 x .090 (5.97) .625 (50.80) (1.14 x 2.28) (15.88) 2.50 .090 (63.5) ++ ++ “A” “A” (2.29) .180 CLEARANCE HOLE FOR PC Socket Dim. A Dim. B (4.57) RELAY MNTG. STUD & Term. Length GROUNDING SPRING .180” .180 .115 .312 2 POLE 1.135 (4.57) (2.92) (7.92) .120 DIA. HOLE (28.83) .16 .210” .210 .156 .519 (3.05) .32 4 POLE (5.33) (3.96) (4.1) (13.18) (8.1) .165 ±.010 .725 6 POLE (4.19) ( ) TOLERANCES ± .25 (18.42) UNLESS OTHERWISE SHOWN .931 8 POLE (23.65) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 707 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B R10 Socket & Accessory Information (Continued) Ordering Data – Stock items are boldfaced. Socket No. of Type of Grounding Part No. Poles Terminal Provision X= 2 POLE .978 .85 MAX. (24.84) (21.6) 4 POLE 1.184 (30.07) X .075 .210 TYP . .437 (1.91) (5.33) (11.10) 27E317 2 Solder/ Strip .150 27E152 4 Bracket Strip .484 (3.81) (12.29) + Bracket Mount Socket .058 .045 x .090 TYP. .156 Allows solder terminal relay to mount (1.47) (1.14 x 2.28) (3.96) flat on a chassis. MATERIAL .437 TAPPED #6-32 THREAD THICKNESS (11.10) .045 x .090 Socket No. of Dim. A Dim. B Dim. C .780 MAX. .175 REF. (1.14 x 2.28) (19.81) (4.45) Part No. Poles Nom. Max. Min. SLOT IN TERMINALS .065 2 HOLES (1.65) .147 DIA. (3.73) .687 27E446 2 1.437 1.822 .937 (17.45) (36.50) (46.27) (23.80) AB C Flange Mount Socket 27E447 4 1.687 2.072 1.125 Solder terminal socket with tin-plated .210 (42.85) (52.63) (28.58) terminals and grounding strip pre- (5.33) assembled on .065” (1.65mm) steel 2 MTG. HOLES .25 .320 REF. 27E448 6 1.875 2.260 1.343 mounting plate. Requires only one .187 ± .010 .147 DIA. (6.35) (8.13) (47.63) (57.40) (34.11) (4.75 ± .25) (3.73) chassis cutout. Part No. No. of Dim. A Dim. B Dim. C 2 Pole Poles Nom. Max. Nom. Terminal Wiring Code (2) MTNG. HOLES .187 DIA. 27E460 2 1.800 2.230 .200 #6-32 SCREWS .100 (4.75) (45.72) (56.64) (5.08) (2.54) + 6 10 7 8 +++ 27E461 4 2.125 2.830 .337 +++ 5 +++ 9 (53.98) (71.88) (8.56) A B +++ 1 4 Track Mount Socket 2 3 Provides front wiring, screw terminal .062 ± .007 27E462 6 2.812 3.830 .494 + (1.57 ± .178) connections for R10 family relays. No (71.42) (97.28) (12.55) grounding provision. C 2.75 ± .015 .530 MAX. 1.375 ± .010 See preceding page for hold down springs. (69.85 ± .381) (13.46) (34.93 ± .254) 4 Pole 6 Pole Terminal Wiring Code Terminal Wiring Code 9 12 9 15 + + 13 21 10 16 +++ 11 22 +++ +++ 8 14 10 20 +++ +++ Suggested Track Mounting Suggested Chassis Mounting 7 8 +++ 19 13 +++ +++ +++ 7 17 11 5 +++ 27EXXX 5 16 6 12 +++ PC BOARD 6 14 27EXXX .187 MIN. 1 4 .187 MIN. 15 18 PC BOARD (4.75) + (4.75) 1 2 3 4 + 2 3 24A110 40G432 1.375 TRACK CHASSIS INSULATOR (34.93) 1.12L x .41W x .26H 24A071 SUGGESTED STANDOFF (28.4 x 10.4 x 6.60) MOUNTING CLIP (CUSTOMER SUPPLIED) OR INSULATOR (40G432) .375 (9.53) DIA. MIN; .625 (15.88) DIA. MAX. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 708 specified. Refer to inside back cover. SUGG CHASSIS CUTOUT Catalog 1308242 Issued 3-03 P&B KHA series General Purpose Dry Circuit to 5A Multicontact AC or DC Relay File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product KHS KHAU part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 25°C Features • Miniature size from 2 pole to 4 pole. Voltage: From 6 to 120VDC, and 6 to 240VAC, 50/60 Hz. • KHAU is produced on an automated line, while KHU is produced Nom. Power: DC coils - 0.9 watt; 0.5 watt minimum operate @ 25°C. manually. Form, fit and function of the two versions are identical. AC coils - 1.2 VA; 0.55 VA minimum operate @ 25°C. • KHS hermetically sealed version UL Approved for Class 1 Division 2 Max. Power: DC coils - 2.0 watts @ 25°C. hazardous locations. Duty Cycle: Continuous. • Various applications include process control, photocopier, and data Initial Breakdown Voltage: 500V rms, 60 Hz. processing. • Push-to-test and indicator options available. • Various contact materials available for specific load requirements. Coil Data DC Coils AC Coils Resistance Nominal Resistance Nominal Nominal in Ohms Inductance in Ohms AC Current Voltage ±10% @ in Henrys ±15% in mA 0 25 C Contact Data @ 25°C 5 32 .072 — — Arrangements: 2 Form C (DPDT), 4 Form C (4PDT). 6 40 .08 10.5 200 Expected Life: 10 million operations, mechanical; 100,000 operations min. 12 160 .28 43 100 at rated loads. Ratings are based on tests of relays with 24 650 1.0 160 52 ungrounded frames. 48 2,600 4.5 668 25 Initial Breakdown Voltage: 500V rms, 60 Hz., between open contacts. 110 * 11,000 17.0 — — 1240V rms, 60 Hz., between all other 120 * — — 3,900 11.0 elements. 240 — — 12,000 6.0 *Note: For 220 and 240VDC, use series dropping 5W resistor of 11,000Ω. Contact Ratings Resistive Rating Contact Operate Data @ 25°C Material Code Minimum Maximum Must-Operate Voltage: DC: 75% of nominal voltage. AC: 85% of nominal voltage. 1 Silver 100mA @ 3A @ Operate Time: 13 milliseconds typical @ nominal voltage (excluding 12VAC/12VDC 120VAC/28VDC bounce). Release Time: 6 milliseconds typical @ nominal voltage (excluding 2* Silver-cadmium 500mA @ 5A @ bounce). oxide 12VAC/12VDC 120VAC/28VDC 3 Gold-silver-nickel 10mA @ 2A @ 12VAC/12VDC 120VAC/28VDC 6 Bifurcated cross bar, Dry circuit 1A @ Environmental Data gold overlay silver 120VAC/28VDC Temperature Range: -45°C to +70°C operate. 8 Gold diffused silver 50mA @ 3A @ -60°C to +130°C storage. 12VAC/12VDC 120VAC/28VDC Note: Relays should only carry a maximum of 15 amps continuously for all poles combined. Mechanical Data Mountings: #3-48 stud, sockets with printed circuit or solder terminals, or bracket plate with #6-32 threaded stud. KHS Contact Ratings Termination: Printed circuit or solder/socket terminals. Class I Division II Hazardous Location: Printed circuit terminals are available for KHS on a special 5A@28VDC/120VAC order basis. UL 508 (Industrial Control): Enclosures: See Ordering Information table. 3A@28VDC/120VAC; 1/10 HP @ 120VAC. Weight: 1.6 oz. approx. (45g). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 709 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B KHA U -17 A 1 1 B -24 1. Basic Series: (See Note 1) 2. Type: E = Printed circuit terminals, nylon dust cover, contacts rated opposite polarity (UL & CSA). S = Solder terminals, hermetically sealed steel case (UL & CSA). Note: Do not ground KHS frame without consulting factory for load levels. (Order as KHS, not KHAS.) U = Solder terminals, clear polycarbonate dust cover, contacts rated same polarity (UL & CSA). 3. Contact Arrangement: 11 = 2 Form C (DPDT) 17 = 4 Form C (4PDT) 4. Operating Coil: A = AC D = DC 5. Mounting and Termination: 1 = Socket mount, solder terminals on S, U types; printed circuit terminals on E types. 6. Contact Material: Relay Type E S U Available Codes 1, 2, 3, 1*, 2*, 1, 2, 6, 8 3 6, 8 *UL Rated 1/10 HP, 3A, 120VAC when used with mounting & termination 1. 1 = Silver. 3 = Gold-silver-nickel. 8 = Gold diffused silver. 2 = Silver-cadmium oxide. 6 = Bifurcated crossbar, gold overlay silver. 7. Options Available: Relay Type E S U N Available Codes B (DPDT only) None B H L M B = Push to test button. N = Neon indicator. Only available with 120VAC or 110VDC coils. Not available with mounting & termination 4 or 8. H = Neon indicator and push to test button. Only available with 120VAC or DC coils. Not available with mounting & termination 4 or 8. L = LED indicator. Only available with 6-48VAC or DC coils. M = LED indicator and push-to-test button. Only available with 6-48VAC or DC coils. 8. Coil Voltage: 6, 12, 24, 48, 120, 240**VAC 6, 12, 24, 48, 110VDC **240VAC coil is not available on KHS type relays. Note 1: Some KHA models available in KH construction. Specify KH instead of KHA. Stock Items – Our authorized distributors are likely to stock the following items. KHAE-17D12-24 KHAU-17D11-24 KHS-17D11-48 KHAU-11A11-120 KHAU-17D11-48 KHS-17D11-110 KHAU-11D11-24 KHAU-17D11-110 KHS-17D12-12 KHAU-17A11-12 KHAU-17D12-12 KHS-17D12-24 KHAU-17A11-24 KHAU-17D12-24 KHAU-17A11-120 KHAU-17D12-48 KHAU-17A11N-120 KHAU-17D12-110 KHAU-17A12-120 KHAU-17D16-12 KHAU-17A13-120 KHAU-17D16-24 KHAU-17A16-24 KHS-17A11-24 KHAU-17A16-120 KHS-17A11-120 KHAU-17A18-120 KHS-17A12-120 KHAU-17D11-6 KHS-17D11-12 KHAU-17D11-12 KHS-17D11-24 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 710 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions Mounting Code 1 - KHAU only. Mounting Code 1 - KHS only. 2 & 4 Pole 2 & 4 Pole .859 MAX. (21.82) .910 MAX. (23.11) .750 .250 + .015 .45 REF. .25 (19.05) (6.35 ± .38) (11.4) (6.4) 1 2 3 4 .022 REF 5 6 7 8 .022 (.56) 1.109 MAX. #3-48 THREAD 1.156 MAX. 9 10 11 12 (.56) (28.17) (29.36) .168 (4.27) .000 - .010 .263 .263 REF. (.00 - .25) (6.68) .265 1.281 MAX. (6.68) .525 .281 REF. .312 (6.73) 1.281 MAX. (32.54) (13.34) (7.14) (7.92) .421 .525 REF. (32.54) .312 + .031 (10.69) (13.34) (7.92 ± .79) PC terminal models have rivet, not stud. Max. seated height in 27E006 socket is Class 1 Div. 2 Group A, B, C & D Hazards 1.37" (34.8mm). Mounting Code 1 - Neon Indicator, Push-To-Test. Printed Circuit Terminals .859 MAX. (21.82) .168 ± 020 .797 ± .020 .250 .750 (20.24 ± .51) (6.35) (4.27 ± .51) (19.05) .125 DIA. .313 .040 ± .010 (3.18) (7.95) (1.02 ± .25) .052 REF. 1 2 3 4 (1.32) 5 6 7 8 .168 (4.27) #3-48 THREAD 9 10 11 12 .112 .15 .265 ± .046 .047 (2.84) (3.81) (6.73 ± 1.17) REF. (1.19) 1.281 MAX. .219 .421 ± .046 .263 Printed circuit terminal thickness .022 (.558) (32.54) (10.69 ± 1.17) (5.56) .312 ± .031 (6.68) 1.600 MAX WITH .525 (7.92 ± .79) .200 (5.08) terminal length available on special order INDICATOR LAMP (13.34) .180 DIA. BOSSES (38.10) (4.57) Wiring Diagrams (Bottom Views) 2 Pole 4 Pole 1 2 3 4 1 4 5 6 7 8 5 8 9 10 11 12 9 12 13 14 13 14 + + - - + = Polarity for LED indicator. PC Board Layout (Bottom View) .160 (4.06) .410 (10.41) .660 For KHAE Relays with PC terminals (16.76) and sockets with 14 PC terminals .175 PLACES (4.45) .070 DIA. (1.78) .350 .525 (13.34) (8.89) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 711 specified. Refer to inside back cover. #3-48 THREAD .022 ± .015 (.56 ± .38) 1.109 MAX. (28.17) 2.363 MAX. (60.02) Catalog 1308242 Issued 3-03 P&B Sockets For KHA And KHS Series Boldface sockets are normally maintained in stock for immediate delivery. 4-Pole Socket For KHAU, KHAX, KHS, KHU Relays. Relays with solder terminals are required for use with sockets. .068 (1.73) Socket Description .183 (4.65) Industrial No. of Terminal Grounding Socket Part No. Poles and Length Provision Material 1.150 27E006* 4 Solder .375" Yes Nylon (29.21) (9.53mm) .012 (0.30) 27E007* 4 P.C. .218" Yes Nylon (5.54mm) .310 27E023* 4 P.C. .218" No Nylon (7.87) 1.07 .850 27E220* 2 (5.54mm) (2.72) (21.59) 27E166** 4 Screw Yes Glass-filled .440 Polyester (11.18) 27E894** 4 Screw No Glass-filled Polyester Recommended Chassis Cutouts 20C217 Relay Hold Down Spring For Mounting Sockets 20C297 Relay Hold Down Spring - use with 27E166 20C426 Relay Hold Down Spring - use with 27E894 .858 (21.79) * UL Recognized, file E22575 Recommended Chassis Thickness ** UL Recognized, file E59244 .031 (.79) to .062 (1.57) 1.015 Pierced Solder Terminals Mounting Strip 37D633 Socket punch Greenlee part (25.78) 5015115.0, Type 731R available 1.388 .629 from Greenlee Tool Co., (35.26) (15.98) 1.323 Rockford, Illinois. (4-pole) .090 R. 1.388 .25 (33.60) (35.26) (2.29) .125 ± .010 (6.4) (3.18 ± 0.25) .617 Printed Circuit Terminals (15.67) With Grounding Lug 1.750 GROUND (44.45) 1.015 .171 .105 LUG (25.78) .090 (4.34) (2.67) (2.29) .052 ± .010 .218 ± .016 (1.32 ± 0.25) (5.54 ± 0.41) .16 .429 .180 .061 GROUND (10.90) (4.1) (4.57) .858 (1.55) LUG .32 (21.79) .065 (8.1) (1.65) .13 Without Grounding Lug (3.3) 37D633 will mount eight solder terminal sockets .171 in one length of aluminum strip measuring 10.97" x 2.25" x .062 (4.34) (278.6 x 57.15 x 1.57) .218 ± .016 (5.54 ± 0.41) Screw Terminal Socket 27E166 Screw Terminal DIN Rail, .061 Relays with solder terminals are required for use Snap-Mount Socket 27E894 (1.55) with screw terminal sockets. (Use with mounting track 24A110) .236 1.181 M3 SCREWS & .800 MAX. (5.99) .94 (30.00) CAPTIVE WASHERS (20.32) (23.88) .446 REF. Caution: Printed circuit sockets are manufactured with .47 .709 (11.33) "floating" (Loose) terminals. This permits them to align (11.93) (18.01) with holes in the circuit board and with the relay terminals. .165 1.18 During the mounting and soldering of the socket, vertical (4.19) (30.0) float should be eliminated and the terminals seated on the 1.771 board. (This may be accomplished by inserting a dummy 2.441 relay in the socket.) Failure to eliminate float may cause (44.98) (62.00) fracture of the solder joint or separation of the copper .140 TYP. conductor from the printed circuit board when a relay is (3.56) inserted in the socket after soldering. .210 TYP. .728 (5.33) .118 1.024 Hold Down # 4-40 SCREWS & (18.49) (3.00) (26.01) .984 CAPTIVE WASHERS Spring 20C217 (24.99) .600 (15.24) 1.22 MAX. 27E894 27E166 (30.99) Terminal Terminal Location Location 8 7 6 5 8 7 6 5 43 21 4 3 2 1 14 13 14 G 13 12 9 11 10 12 11 10 9 Top View Top View Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 712 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCL/PCLH series 3A, 5A, 10A, 15A General Purpose Miniature Relay Factory Automation, Process Controls, Electrical Panels, etc. UL File No. E58304 CSA File No. LR48471 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data@ 20°C • Small size, 3A, 5A, 10A and 15A switching capacity. PCL AC Coil • Meets UL and CSA requirements. Coil Must Operate Must Release Rated Coil Nominal Coil • 1 pole, 2 poles and 4 poles contact arrangements. Resistance Voltage Voltage Voltage Power • AC and DC coils with UL Class F (155°C) coil insulation system standard. (ohms)±10% (VAC) (VAC) (VAC) (VA) • Optional flange mount case. • Plug-in terminals or PCB terminals. 610 12 40 24 160 Contact Data @ 20°C 48 600 80% max. 30% min. abt. 1.4 Arrangements: 1 Form A (SPST-NO), 1 Form C (SPDT), 100 2,800 110/120 3,400 2 Form A (DPST-NO), 2 Form C (DPDT), 200 11,000 4 Form A (4PST-NO), 4 Form C (4PDT). 220/240 13,600 Material: Ag, Ag Alloy. Max.Switching Rate: 300ops./min.(Mechanical). PCL DC Coil 30ops./min.(Electrical). Rated Coil Coil Must Operate Must Release Nominal Coil Expected Mechanical Life: 100 million operations (no load). Voltage Resistance Voltage Voltage Power Expected Electrical Life: 100,000 operations (rated load). (VDC) (ohms)±10% (VDC) (VDC) (W) Minimum Load: 100mA @ 5VDC. 640 Initial Contact Resistance: 50milliohms @ DC6V,1A. 12 160 abt. 0.9 24 650 80% max. 10% min. Contact Ratings 48 2,600 100/110 11,000 abt. 1.1 Ratings: PCL-4 3A @ AC250V/DC24V resistive. PCL-2 5A @ AC250V/DC24V resistive. PCLH-2 15A @ AC120V resistive. 10A @ AC250V/DC24V resistive. PCLH-1 15A @ AC250V/DC24V resistive. Max. Switched Current: PCL-4 3A. PCL-2 5A. PCLH-2 15A. Operate Data @ 20°C PCLH-1 15A. Must Operate Voltage: AC 80% of nominal voltage or less. Max. Switched Power: PCL-4 660VA, 72W. DC 80% of nominal voltage or less. PCL-2 1,100VA, 120W. Must Release Voltage: AC 30% of nominal voltage or more. PCLH-2 3,168VA, 240W. DC 10% of nominal voltage or more. PCLH-1 3,300VA, 360W. Operate Time: AC 20ms max. DC 15ms max. Initial Dielectric Strength Release Time: AC 20ms max. DC 8ms max. Between Open Contacts: 1,000VAC 1minute. Between Adjacent Contact Terminals: 1,500VAC 1minute. Between Contacts and Coil: 2,000VAC 1minute. Surge Voltage (Coil-Contact): 3,000V(1.2/50μs). Environmental Data Temperature Range: Initial Insulation Resistance Operating: -10°C to +55°C. Humidity: 45 to 85%. (Non-condensing). Between Open Contacts: 1,000Mohms @ 500VDC. Vibration, Operational: 10 to 55Hz 1.0mm double amplitude. Between Adjacent Contact Terminals: 1,000Mohms @ 500VDC. Mechanical: 10 to 55Hz 1.0mm double amplitude. Between Contacts and Coil: 1,000Mohms @ 500VDC. 2 Shock, Operational: 100m/s (abt. 10G). 2 Mechanical: 1,000m/s (abt. 100G). Coil Data Voltage: AC 6 - 240V. DC 6 - 110V. Nominal Power: AC abt. 1.4VA/1.2VA (50Hz/60Hz). Mechanical Data DC abt. 0.9W. Termination: Plug-in, PCB. Coil Temperature Rise: AC 60°C max. Enclosure: Snap-on cover. DC 50°C max. Weight: 1.26 oz (32g) approximately. Max. Coil Power: 110% of nominal voltage. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 713 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number PCL -2 02A 1 S ,000 1. Basic Series: PCL = 3A, 5A type PCLH = 10A,15A type 2. Number of Poles: 1 = 1 pole (PCLH only) 2 = 2 pole 4 = 4 pole (PCL only) 3. Coil Voltage: 01A=6VAC 02A=12VAC 03A=24VAC 04A=48VAC 05A=100VAC 06A=110/120VAC 07A=200VAC 08A=220/240VAC 01D=6VDC 02D=12VDC 03D=24VDC 04D=48VDC 05D=100/110VDC 4. Contact Material: Blank = Ag (only available on 4 pole model) 1 = Ag Alloy (available with all versions) 5. Contact Arrangement: Blank = Form C M = Form A 6. Case Type: S = Standard (Smoke color) F = Flange mount (Smoke color) 7. Terminal Type: Blank = Plug-in P = PCB 8. Indicator Lamp: Blank = None L = Indicator Lamp 9. Option: ,000 = Standard model Other suffix = Custom model. Our authorized distributors are more likely to stock the following items for immediate delivery. PCLH-202A1S,000 PCLH-203A1S,000 PCLH-206A1S,000 PCLH-208A1S,000 PCLH-202D1S,000 PCLH-203D1S,000 PCLH-204D1S,000 PCLH-205D1S,000 PCLH-206A1SP,000 PCLH-202D1SP,000 PCLH-203D1SP,000 PCLH-205D1SP,000 Outline Dimsisions PCL 2c, 2a type (Plug-in Terminal) PCL 2c, 2a type (PCB Terminal) 1.32 ± .02 1.32 ± .02 (33.6 ± .5) (33.6 ± .5) .157 ± .008 (4.0 ± .2) .02 .02 (.5) (.5) .059 .059 .02 .197 ± .012 .02 .02 (1.5) (1.5) .02 (.5) .22 ± .012 .098 .098 (5.0 ± .3) .02 .02 (.5) (.5) (.5) (5.6 ± .3) (2.5) (2.5) (.5) (.5) NOT PRESENT ON FORM A MODEL .157 ± .008 .157 ± .008 1.08 ± .02 1.08 ± .02 (4.0 ± .2) (4.0 ± .2) (27.5 ± .5) (27.5 ± .5) .835 ± .02 .835 ± .02 .520 ± .008 .520 ± .008 (21.2 ± .5) (21.2 ± .5) (13.2 ± .2) (13.2 ± .2) .25 .25 (6.35) (6.35) .498 .498 .248 (12.65) (12.65) .248 (6.3) .659 (6.3) .659 (16.75) (16.75) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 714 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG Outline Dimensions (continued) PCL 4c, 4a type (Plug-in Terminal) PCL 4c, 4a type (PCB Terminal) 1.32 ± .02 1.32 ± .02 (33.6 ± .5) (33.6 ± .5) .157 ± .008 (4.0 ± .2) .02 .02 .039 (.5) .039 (.5) .02 .096 .197 ± .012 (1.0) (1.0) .22 ± .012 (.5) .02 .02 .02 .02 (5.0 ± .3) .02 (2.45) .039 (5.6 ± .3) .039 (.5) (.5) (.5) (.5) (.5) (1.0) .096 (1.0) .096 (2.45) NOT PRESENT ON FORM A MODEL (2.45) .096 .157 ± .008 1.08 ± .02 .157 ± .008 1.08 ± .02 (2.45) (4.0 ± .2) .157 ± .008 (27.5 ± .5) (4.0 ± .2) .157 ± .008 (27.5 ± .5) (4.0 ± .2) (4.0 ± .2) .835 ± .02 .346 ± .008 .835 ± .02 .346 ± .008 (21.2 ± .5) (8.8 ± .2) (21.2 ± .5) (8.8 ± .2) .520 ± .008 .520 ± .008 (13.2 ± .2) (13.2 ± .2) .25 .25 (6.35) (6.35) .498 .498 .248 (12.65) .248 (12.65) (6.3) .659 (6.3) .659 (16.75) (16.75) PCLH type (Plug-in Terminal) PCLH type (PCB Terminal) 1.32 ± .02 1.32 ± .02 (33.6 ± .5) (33.6 ± .5) .24 ± .012 (6.1 ± .3) .02 .02 .02 .02 .177 ± .012 .02 .02 .02 (.5) (.5) (.5) (.5) .02 (.5) (4.5 ± .3) (.5) (.5) (.5) .02 .079 .079 .187 .02 .187 .079 (4.75) (.5) (2.0) (2.0) (.5) (4.75) (2.0) NOT PRESENT ON FORM A MODELS .187 .132 ± .008 1.08 ± .02 .132 ± .008 1.08 ± .02 (4.75) (3.35 ± .2) (27.5 ± .5) (27.5 ± .5) (3.35 ± .2) .22 ± .008 .22 ± .008 (5.6 ± .2) .835 ± .02 (5.6 ± .2) .835 ± .02 (21.2 ± .5) (21.2 ± .5) .571 ± .008 .394 ± .008 .394 ± .008 .571 ± .008 (10 ± .2) (14.5 ± .2) (10 ± .2) (14.5 ± .2) .285 .285 (7.25) (7.25) .518 .518 (13.15) .234 (13.15) .703 (5.95) (17.85) .234 .703 (17.85) (5.95) PCLH type (Flange Mount Case) .854 MAX. .090 TYP . (21.7) (2.3) 12 3 4 56 8 7 1.60 MAX. .138 TYP. (40.7) (3.5) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 715 specified. Refer to inside back cover. 1.10 MAX. (28.0) 1.496 (38.0) 1.71 MAX. (43.5) Catalog 1308242 Issued 3-03 OEG Wiring Diagrams (Bottom Views) PCL 4c type PCL 2c type PCLH 2c type PCLH 1c type PCL 4a type PCL 2a type PCLH 2a type PCLH 1a type PC Board Layouts (Bottom Views) PCL 4pole type PCL 4pole type PCLH type .520 .520 .571 (13.2) (13.2) (14.5) 14 – .059 DIA 8 – .079 DIA 8 – .098 DIA (1.5) (2.0) (2.5) .661 .705 .661 (17.9) (16.8) (16.8) 1.08 1.08 .500 .500 .520 (27.5) (27.5) (12.7) (12.7) (13.2) .252 .252 .287 (6.4) (6.4) (7.3) .248 .248 .236 (6.3) (6.3) (6.0) .173 .173 (4.4) (4.4) .83 .83 .83 (21.2) (21.2) (21.2) Reference Data Coil Temperature Rise Operate Time 35 35 100 DC 30 80 DC Operate Time AC 20 60 AC 15 40 10 Release Time 20 5 DC AC 0.4 0.8 1.2 1.6 2.0 2.4 70 80 90 100 110 120 130 Coil Voltage (% of Rated Nominal) Coil Power (W,VA) Sockets For PCL socket information refer to KH series sockets (page 712). For PCLH socket information refer to K10 series sockets (page 722). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 716 specified. Refer to inside back cover. Temp. Rise (°C) Time (msec) 27.5 Catalog 1308242 Issued 3-03 SCHRACK PT series 6 to 12 Amp Miniature Relay 2, 3 or 4 Pole, PCB or Plug-in UL File E79990 NR 5353 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • Low profile height of 29mm. Must Operate Voltage: See Coil Data table. • DPDT, 3PDT or 4PDT contact arrangements. Operate Time : 15 ms typical, at nom. voltage. • Greater switching performance – up to 3,000VA. Release Time : 10 ms typical, at nom. voltage. • AC and DC coils. Bounce Time: 5 ms typical, at nom. voltage. • Mechanical indicator. Switching Rate: 6 ops./minute max. at rated load. • Manual test tab with locking option available. Environmental Data Temperature Range: Contact Data @ 20°C Storage: -45°C to +80°C. Arrangements: 2 Form C (DPDT), 3 Form C (3PDT) and 4 Form C (4PDT). Operating: -45°C to +70°C. Material: Silver-nickel 90/10 with optional gold plating. Vibration: 55 to 150 Hz. at 7g N/O, 4g N/C. Minimum Load: Silver-nickel 90/10: 10mA @ 12V. Operational Shock: 20g N/O, 5g N/C. Silver-nickel 90/10 with gold plating: 1mA @ 20mV. Mechanical Shock: 50g. Expected Mechanical Life: DC coil 30 million operations minimum. AC coil 20 million operations minimum. Ratings: Arrangement 2 Form C 3 Form C 4 Form C Electrical Life 7 Rated Current 12A 10A 6A 10 Rated Voltage 250VAC 250VAC 250VAC Maximum Switching Voltage 440VAC 440VAC 440VAC 250VAC Resistive Load Rated Breaking Capacity 3,000VA 2,500VA 1,500VA 6 10 Maximum Make Current 24A 20A 12A 5 Initial Dielectric Strength 10 Between Open Contacts: 1,500VAC. Between Coil and Contacts: 2,500VAC; 5,000V surge (1.2 / 50µs). 4 10 Between Poles: 2 and 3 Pole:2,500VAC, 4 Pole: 2,000VAC. 04 8 12 16 20 Switching Current (A) DC Coil Data @ 20°C Max. DC Load Breaking Capacity (resistive load) Nominal Coil Power: 750mW 50 DC Must Nominal 2 Pole Nominal Resistance Operate Drop-out Coil 10 Voltage in Ohms Voltage Voltage Current 3 Pole VDC ±10% VDC VDC (mA) 5 06 48 4.5 0.6 125.0 4 Pole 2 12 192 9.0 1.2 62.5 1 24 777 18.0 2.4 30.8 0.5 48 3,072 36.0 4.8 15.6 60 4,845 45.0 6.0 12.4 110 16,133 82.5 11.0 6.8 0.1 10 20 30 4050 100 200 300 220 64,533 165.0 22.0 3.4 DC Voltage (V) AC Coil Data @ 20°C Coil Operating Range Nominal Coil Power: 1.0VA @ 50 Hz. / 0.86VA @ 60 Hz. 220 220 DC Must Nominal 200 200 AC Coil DC Coil Nominal Resistance Operate Drop-out Coil 180 180 Voltage in Ohms Voltage (VAC) Voltage Current (mA) 160 160 VAC ±10% 50 Hz / 60 Hz VAC 50 Hz. / 60 Hz. 140 140 06 11 4.8 / 5.4 1.8 166.5 / 141 12 48 9.6 / 10.8 3.6 83.3 / 70.5 120 120 24 192 19.2 / 21.6 7.2 41.6 / 33.0 100 100 48 777 38.4 / 43.2 14.4 21.3 / 18.2 80 80 60 1,306 48.0 / 54.0 18.0 16.7 / 14.5 60 115 4,845 92.0 / 103.5 34.5 8.8 / 7.5 60 0 +20 +40 +60 +80 +100 0 +20 +40 +60 +80 +100 230 19,465 184.0 / 207.0 69.0 4.3 / 3.9 Ambient Temperature (°C) Ambient Temperature (°C) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 717 specified. Refer to inside back cover. Applied Coil Voltage (% of Nominal) DC Current (A) Operations Applied Coil Voltage (% of Nominal) ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B PT 2 7 0 024 1. Basic Series: PT = General purpose relay. 2. Contact Arrangement: 2 = 2 Form C (DPDT) 3 = 3 Form C (3PDT) 5 = 4 Form C (4PDT) 3. Contact Material and Test Button Option: 2 = Silver-Nickel 90/10, no test button. 3 = Silver-Nickel 90/10, with gold plating, no test button. 7 = Silver-Nickel 90/10 with locking test button. 8 = Silver-Nickel 90/10, with gold plating, and locking test button. 4.Termination: 0 = Socket mount, solder terminals. 1 = Printed circuit board terminal. 5. Coil Voltage: 006 = 6VDC 012 = 12VDC 024 = 24VDC 048 = 48VDC 060 = 60VDC 110 = 110VDC 220 = 220VDC 506 = 6VAC 512 = 12VAC 524 = 24VAC 548 = 48VAC 560 = 60VAC 615 = 115VAC 730 = 230VAC Our authorized distributors are more likely to stock the following items for immediate delivery. PT580024 PT220024 PT221024 PT270024 PT320024 PT321024 PT370024 PT520024 PT521024 PT570024 PT320524 PT580524 PT220524 PT221524 PT270524 PT321524 PT370524 PT520524 PT521524 PT570524 PT580615 PT220615 PT221615 PT270615 PT320615 PT321615 PT370615 PT520615 PT521615 PT570615 Outline Dimensions Socket Mount, SolderTerminals Printed Circuit Board Terminals 1.102 .882 ➤ ➤ 1.102 (28) (22.4) .882 ➤ ➤ (28) (22.4) 1.14 1.14 (29) (29) .095 (2.4) .165 (4.2) .020 .047 ➤ ➤ .087 .236 (0.5) ➤ .020 (1.2) ➤ (2.2) .185 (6.0) (0.5) (4.7) Wiring Diagrams (Bottom Views) (1) (4) (1) (2) (3) (1) (2) (3) (4) 12 42 12 22 32 12 22 32 42 (7) (5) (8) (5) (6) (7) (5) (6) (8) 34 14 44 14 24 34 14 24 44 (9) (12) (9) (10) (9) (10) (11) (12) (11) 11 41 11 21 11 21 31 41 31 (13) (14) (13) (14) (13) (14) A1 A2 A1 A2 A1 A2 PC Board Layout (Bottom Views) .173 (4.4) .173 .173 (4.4) .175 (4.4) .173 (4.45) .173 .260 (4.4) .157 (4.4) (6.6) .173 .260 .519 (4.0) .25 (6.6) (13.2) (4.4) (6.35) .051 + .004 Ş (1.3 + 0.1) .25 (6.35) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 718 specified. Refer to inside back cover. ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ Catalog 1308242 Issued 3-03 SCHRACK 27E894 DIN Rail Socket with Screw Terminals, 4 pole .236 1.181 M3 SCREWS & (5.99) (30.00) CAPTIVE WASHERS .709 (18.01) .165 (4.19) 1.771 2.441 (44.98) (62.00) .728 .118 1.024 (18.49) (3.00) (26.01) .984 (24.99) PT78702, PT78703, PT78704 (2, 3 and 4 Pole) 27E023 DIN Rail Socket with Screw Terminals 4 Pole Socket with PCB Terminals 1.06 1.67 1.150 (29.21) (27.0) (42.5) .889 1.06 (22.5) (27.0) GROUND LUG .850 .061 (21.59) (1.55) 2.95 (75.0) .218 ± .016 .126 (5.54 ± 0.41) (3.2) .171 (4.34) 27E220 27E006 2 Pole Socket with PCB Terminals 4 Pole Socket with SolderTerminals 1.150 1.150 (29.21) (29.21) GROUND LUG .061 .850 .850 .052 ± .010 (1.55) (21.59) (21.59) (1.32 ± 0.25) .105 .218 ± .016 (2.67) (5.54 ± 0.41) .125 ± .010 .171 (3.18 ± 0.25) (4.34) Socket Selection Table LED and Protection Module Selection Table Stock items are boldfaced. Stock items are boldfaced. Socket Socket Termination Mounting No. of Accepts Module Type Part No. Style Poles Modules? Part No. RPM T0 0A0 Protection diode 1N4007 (Note 1) 27E894 Screw Terminals DIN-rail 4 No RPM U0 548 RC network 24-48VAC PT78702 Screw Terminals DIN-rail 2 Yes RPM U0 730 RC network 110-230VAC PT78703 Screw Terminals DIN-rail 3 Yes RPM L0 024 LED 12-24VDC (Note 1) PT78704 Screw Terminals DIN-rail 4 Yes RPM L0 524 LED 12-48VAC/VDC 27E006 .375 (9.53) SolderTerminals Panel Cutout 4 No RPM L0 110 LED 110VDC (Note 1) 27E220 .218 (5.54) SolderTerminals PC Board 2 No RPM L0 730 LED 110-230VAC 27E023 .218 (5.54) PCB Terminals PC Board 4 No Note 1: Standard polarity: A1: +, A2: – Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 719 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B K10 series 15 Amp General Purpose Miniature Relay File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features • K10 - DPDT contact arrangement standard. DC Coils AC Coils • AC and DC coils. Nominal Resistance Nominal Resistance Nominal • Mounting options include socket, PCB, top flange. Voltage in Ohms Current in in Ohms Current in • UL Class B coil insulation system. ± 10% Milliamps ± 15% Milliamps 6 40 150 10.5 200 12 160 75 43 100 24 650 37 160 52 48 2,600 18.5 668 26 110 11,000 10 ___ ___ 120* ___ ___ 3,900 11 240* ___ ___ 12,000 6 Contact Data @ 25°C *For 220/240VDC operation, use 11,000 Ohm, 5 Watt dropping resistor in series with the 110VDC coil. Materials: Silver-cadmium oxide. Expected Life: 10 million operations, mechanical; 100,000 operations minimum at rated loads. Contact Ratings Contact Code Material UL/CSA Ratings Type 5 Silver-cadmium 15A @ 30VDC Resistive Operate Data @ 25°C oxide 15A @ 120VAC Resistive 10A @ 277VAC Resistive Must Operate Voltage: 1/3HP @ 120VAC DC Coils: 75% of nominal voltage. 1/2HP @ 250VAC AC Coils: 85% of nominal voltage. Operate Time (Excluding Bounce):13 milliseconds, typical, at nominal voltage. Release Time (Excluding Bounce): 6 milliseconds, typical, at nominal voltage. Initial Dielectric Strength Between Open Contacts: 1,000V rms. Between Adjacent Contacts: 1,500V rms. Environmental Data Between Contacts and Coil: 1,500V rms. Temperature Range: Storage: -60°C to +105°C. Operating: -45°C to +70°C. Coil Data @ 25°C Mechanical Data Nominal Power: DC Coils: .9 Watts. Mounting: Socket mount, printed circuit board, top flange. AC Coils: 1.2VA. Termination: .187" (4.75mm) quick connect/solder terminals, or Maximum Power: 2.0 Watts. printed circuit terminals. Duty Cycle: Continuous. Enclosure: Smoke-color polycarbonate dust cover. Insulation: Class B: (130°C). Weight: 1.8 oz. (51g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 720 specified. Refer to inside back cover. 1 2 3 4 5 6 A B Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B K10 P -11 D 1 5 -6 1. Basic Series: K10 = 15 amp miniature relay. 2. Cover: P = Polycarbonate (smoke color). 3. Contact Arrangement: 11 = 2 Form C (DPDT) 4. Coil Input: A = 50/60 Hz. AC D = DC 5. Mounting & Termination: 1 = Socket mount; .187" (4.75mm) quick connect/solder terminals. 5 = Printed circuit terminals; .160" length. T = Mounting bracket on end of cover; .187" (4.75mm) quick connect/solder terminals. 6. Contact Type: 5 = 15 amp silver-cadmium oxide 7. Coil Voltage: To 240VAC or 110VDC, see coil data table. Our authorized distributors are more likely to stock the following items for immediate delivery. K10P-11A15-6 K10P-11D15-6 K10P-11D55-24 K10P-11A15-12 K10P-11D15-12 K10P-11D55-110 K10P-11A15-24 K10P-11D15-24 K10P-11DT5-12 K10P-11A15-120 K10P-11D15-110 K10P-11DT5-24 K10P-11AT5-120 K10P-11D55-12 Outline Dimensions Mounting Code 1 Mounting Code 5 Mounting Code T Socket Mount Printed Circuit Terminals .854 MAX. (21.69) .078 TYP. (1.98) w/NEON INDICATOR 1.600 MAX. (40.64) 12 1.375 MAX. 3 4 .125 (34.93) (3.18) 5 6 .25 (6.4) B A .078 .078 (1.98) .160 .187 ± .002 (1.98) .020 ± .002 (4.06) (4.75 ± .05) (.51 ± .05) .020 ± .002 1.109 MAX. 1.682 MAX. (.51 ± .05) .142 TYP. (28.17) (42.72) (3.61) .860 MAX. .559 .394 (21.84) (14.20) (10.01) .281 (7.14) .181 .239 REF. .517 (4.60) (6.07) (13.13) PC Board Layout Wiring Diagram .086 DIA. 1 2 .394 (2.18) (10.01) .185 3 4 .232 (4.70) (5.89) 5 6 A B .285 .559 (7.24) (14.20) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 721 specified. Refer to inside back cover. 1.400 MAX. (35.56) w/NEON INDICATOR 1.625 MAX. (41.28) 1.087 ± .010 (27.61 ± .25) 1.480 ± .003 (37.59 ± .08) 1.720 MAX. (43.69) Catalog 1308242 Issued 3-03 P&B Sockets and Accessories for K10 Relays Sockets for K10 series relays are rated 10 amps, and are UL recongnized, File E59244, and CSA certified, File LR15734. 27E488 20C217 Chassis Cutout For 37D633 Pierced Solder Terminals Hold Down Mounting 27E488 Mounting Strip Spring For Socket 27E488 & 27E489 .629 1.388 (15.98) .617 (35.26) .844 .440 .850 ± .005 (15.67) .075 (11.18) (21.79 ± .13) (21.44) 1.388 .090 R. 1.323 .25 (1.90) (35.26) (33.60) (2.29) (6.4) 1.015 ± .005 1.158 .012 (28.07 ± .13) (29.41) (0.30) 1.015 1.750 (25.78) .090 (44.45) .072 x .140 (2.29) (1.83 x 3.56) .070 Recommended chassis (1.78) .429 .16 .180 thickness .039" (.99mm) to .770 (10.90) (4.1) (4.57) .079" (2.01mm). .859 (19.56) .065 .32 (21.79) (1.65) (8.1) .13 (3.3) Socket punch Greenlee part 37D633 will mount eight 27E488 sock- 5015115.0, Type 731R ets in one length of aluminum strip mea- available from suring 10.97" x 2.25" x .062". Greenlee Tool Co., (278.64 x 57.15 x 1.57) Rockford, Illinois. 27E489 Printed Circuit Terminals P.C. Board Layout For Socket Caution: Printed circuit sockets are manufac- tured with "floating" (loose) terminals. This per- .440 mits them to align with holes in the circuit board .086 DIA. TYP. (11.18) .507 .844 and with the relay terminals. During the mount- .075 (12.88) (2.18) (21.44) .113 ing and soldering of the socket, vertical float (1.90) (2.87) should be eliminated and the terminals seated on the board. (This may be accomplished by .417 .672 inserting a dummy relay in the socket.) Failure to 1.158 .012 (10.59) (17.07) eliminate float may cause fracture of the solder (29.41) (0.30) .185 joint or separation of the copper conductor from (4.70) .620 the printed circuit board when a relay is inserted (15.75) in the socket after soldering. .184 (4.69) Note: P.C. terminal socket will also fit P.C. board layout for relay. However, in order to accomplish this, terminals must be formed accordingly. .078 (1.98) 27E895 27E487 20C426 Screw Terminals, DIN Rail Snap-Mount Screw Terminals Hold Down Spring (Use with mounting track 24A110) For 27E487 & 27E895 Terminal 1.036 1.130 Terminal Location (26.31) (28.70) Location 43 43 1.299 1.375 (32.99) (34.93) 2 1 2 1 2.598 2.750 (65.99) (69.85) B A .170 TYP. .156 TYP . (4.32) (3.96). 8 7 8 7 6 5 .313 TYP . .315 TYP . .669 (7.94) (8.00) 6 5 (16.99) 1.178 1.385 (29.92) (35.18) .312 1.045 .995 (7.92) (26.54) (25.27) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 722 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B KU series KUP Enclosed Relay KUIP VDE 8mm Coil to Contacts KUGP VDE 8mm 3mm Gap Coil to Contacts KUEP 10 Amp 150VDC Load Switching KUMP 15 Amp 277VAC File E22575 File LR15734 0435 Registration 1792 (KUIP) 0435 Registration 1792 (KUGP) License 81.12102.01 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 25°C Features • AC coils: 6-240VAC, 50/60 Hz. DC: 6-110VDC. Voltage: 6 to 110VDC and 6 to 240VAC. Nominal Coil Power: • Contact arrangement up to 4PDT. • Wide selection of termination and mounting styles. DC Coils: 1.2 Watts - KUP, KUIP, KUMP, 1 - 3 pole; KUEP, 1 pole. DC Coils: 1.8 Watts - KUP, 4 pole; KUEP, 2 pole; KUGP. • PC terminals available. • Push to test button and indicator lamps. AC Coils: 2.0VA - KUP, KUIP, 1 - 2 pole; KUEP, 1 pole. AC Coils: 2.7VA - KUP, KUIP, 3 pole; KUEP, 2 pole; KUGP, KUMP. • KUEP incorporates a blow out magnet for high voltage DC switching. • KUIP/KUGP are VDE approved. • Complete line of sockets and DIN rail. • Class B coil insulation. Coil Data DC Volts 1.2 Watt 1.8 Watt Contact Data @ 25°C Nominal DC Ohms ± 10% Nom. I ma DC Ohms ± 10% Nom. I ma Arrangements: See respective ordering information table. 5 21 238 14 360 Materials: Fine silver (5 amp) silver-cadmium oxide (10 amp). 6 32.1 187 20 300 Gold flash available as standard. 12 120 100 80 150 Gold diffused and gold alloy on special order. 24 472 51 320 75 Expected Mechanical Life: 48 1,800 26.7 1,260 38 110 10,000 11 6,720 16 Contact Ratings AC Volts 2VA 2.7VA Material Arrangement UL/CSA Ratings Expected Nominal DC Ohms ± 15% Nom. I ma DC Ohms ± 15% Nom. I ma Life 6 6 335 4.2 460 12 24 168 18 230 Fine All 5 amps @ 28VDC or 240VAC 24 85 84 72 115 Silver 80% PF, 2.5 amp tungsten 120 2,250 17.5 1,700 24 @120VAC, 1/2 amp @ 120VDC. 100,000 240 9,110 8.75 7,200 12 1/6 HP @120VAC, 1/3 HP @ 240VAC, 5 FLA, 15 LRA @ 250VAC (FLA covered by 30,000 operations). Silver- 1-2 Pole 10 amps @ 28VDC or 240VAC, Cadmium KUP 80% PF, 5 amp tungsten @ Operate Data @ 25°C Oxide KUIP 120VAC, 3A 600VAC, 1/2 amp Must Operate Voltage: KUGP @ 120VDC. 100,000 DC Coils: 75% of nominal voltage or less. KUEP 1/3 HP @ 120VAC, 1/2 HP @ AC Coils: 85% of nominal voltage or less. All KUMP 240, 480, and 600VAC, 10 FLA Operating Time (Excluding Bounce): 30 LRA @ 120VAC, 5 FLA, 15 milliseconds, typical, at nominal voltage. 15 LRA @ 250VAC.(FLA ratings Release Time (Excluding Bounce): covered by 30,000 operations) 10 milliseconds, typical, at nominal voltage. KUMP 15 amp @ 277VAC, 80% PF KUM KUMP 100,000 3 Pole 10 amp @ 28VDC or 120VAC, KUP 80% PF, 6 2/3 amp @ 240VAC, KUIP 80% PF 100,000 4 Pole 10 amp per pole not to exceed Environmental Data 30 amp total @ 28VDC, 120VAC, Temperature Range: 80% PF, 6 2/3 amp @ 240VAC, Operating: Enclosed Relays: -45°C to maximum listed in table below. 80% PF 100,000 Open Relays: Add 15°C to maximum listed. KUEP SPST-NO 10 amp @ 150VDC Max C° +45°C +50°C +55°C +70°C +75°C +80°C +95°C KUEP KUP AC DC AC DC 2PST-NO 5 amp @ 150VDC 3-4 pole 4 pole 1-2 pole 1-3 pole KUEP 2PDT 3 amp @ 150VDC 100,000 KUIP AC AC DC 3 pole 1-2 pole 1-3 pole (All other AC ratings apply KUEP.) KUGP AC DC 2 pole 2 pole Initial Dielectric Strength KUEP AC DC AC DC 2 pole 2 pole 1 pole 1 pole Between Open Contacts: 1,200V rms; KUGP, 3,500V rms. KUMP AC AC DC Between Adjacent Contacts: 2,200V rms. 3 pole 1-2 pole 1-3 pole Between Contacts and Coil: 2,200V rms; KUGP, KUIP, 3,750V rms. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 723 specified. Refer to inside back cover. 2.0 VA 60 Hz. COIL 2.7 VA 60 Hz. COIL 1.8 Watt DC Coil 1.2 Watt DC Coil Catalog 1308242 Issued 3-03 P&B Environmental Data (Continued) Mechanical Data Maximum Allowable Ambient Temperature vs. Voltage (KUP enclosed) Termination: Quick connect, solder and PC board. 75° 75° Enclosure: Clear polycarbonate dust cover. 70° Weight: 3.0 oz. (85g) approximately. 70° 60° 60° 50° 50° 40° 40° 30° 30° 20° 20° 100 110 120 130 140 100 110 120 130 140 150 160 % of Nominal Voltage DC % Of Nominal 60 Hz. Voltage Ordering Information Typical Part No. B KU -14 A 1 5 F -120 1. Basic Series & Type: KUP KU = Basic open relay. KUP = Basic enclosed relay. 2. Contact Arrangement: 1 = 1A (SPST-NO) 14 = 3C (3PDT) 5 = 1C (SPDT) 17 = 4C (4PDT) 11 = 2C (DPDT) 3. Coil Input: A = AC 50/60 Hz. D = DC 4. Mountings: Type KU KUP (through 3 poles) KUP (4 pole models) Codes 1,2,3,4,5, Available 1,3,4 A,E,T 1,3,5,A,E OPEN STYLE 1 = PLAIN CASE; 1 = #6-32 stud, .218" (5.54mm) locating tab. 2 = with test button. 3 = #6-32 tapped core, .125" (3.18mm) locating tab. 3 = with indicator lamp.* 4 = #6-32 tapped core, .218" (5.54mm) locating tab. 4 = with test button & indicator lamp.* 5 = BRACKET MOUNT CASE. A = PLAIN CASE, #6-32 stud, locating tab. E = PLAIN CASE, tapped core, locating tab. T = TOP FLANGE CASE. * Indicator lamps are available on models with the following coils: 6-24VAC and DC, 110VDC and 120-240VAC. Only models with 120-240VAC coils are UL recognized. 5. Terminal & Contact Material: Type 1 & 2 Pole Models 3 Pole Models 4 Pole Models Codes 1, 5, 7, K 1, 5, 7 1**, 5**,7, 9 **4 pole KUP with .187" (4.75mm) quick connect/solder Available terminals will not plug into sockets. Must use .110" (2.79 mm) quick connect solder terminals for socket mounting. 1 = .187" (4.75mm) quick-connect/solder; silver, 5 amps. 5 = .187" (4.75mm) quick connect/solder; silver-cadmium oxide, 10 amps. 7 = .047” (1.19mm) printed circuit; silver-cadmium oxide, 10 amps. 9 = 4 pole KU, KUP: .110" (2.79mm) quick connect/solder; silver-cadmium oxide, 10 amps. K = .250" (6.35mm) quick connect; silver-cadmium oxide, 10 amps. 5A. Gold Flashed Contact Option: F = Optional gold flashing for silver and silver-cadmium oxide contacts. 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. Our authorized distributors are more likely to stock KUP-5A15-24 KUP-11A15-12 KUP-11D15-5 KUP-11D55-110 KUP-14A55-24 KUP-14D25-24 KUP-5A15-120 KUP-11A15-24 KUP-11D15-12 KUP-14A11-120 KUP-14A55-120 KUP-14D35-24 KUP-5A15-240 KUP-11A15-120 KUP-11D15-24 KUP-14A15-12 KUP-14A55-240 KUP-14D55-12 KUP-5A55-120 KUP-11A15-240 KUP-11D15-110 KUP-14A15-24 KUP-14D11-24 KUP-14D55-24 KUP-5D15-12 KUP-11A35-120 KUP-11D35-24 KUP-14A15-120 KUP-14D15-6 KUP-17A19-120 KUP-5D15-24 KUP-11A55-24 KUP-11D55-6 KUP-14A15-240 KUP-14D15-12 KUP-17A55-24 KUP-5D55-12 KUP-11A55-120 KUP-11D55-12 KUP-14A25-120 KUP-14D15-24 KUP-17D19-24 KUP-5D55-24 KUP-11AT5-120 KUP-11D55-24 KUP-14A35-120 KUP-14D15-48 KUP-17D55-24 KUP-11A11-120 KUP-11D11-24 KUP-11D55-48 KUP-14A45-120 KUP-14D15-110 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 724 specified. Refer to inside back cover. Max. Ambient Temp. °C Max. Ambient Temp. °C Catalog 1308242 Issued 3-03 P&B Ordering Information VDE Approved Design Typical Part No. B KUIP -5 A 5 5 -120 1. Basic Series & Type: KUGP KUIP = Enclosed relay designed for General VDE 0435.* KUGP = Enclosed relay with 3mm open contact spacing. (Form A and Form X arrangements only)* 2. Contact Arrangement: 5 = 1 Form C (SPDT)* 11 = 2 Form C (DPDT)* 7 = 2 Form A (DPST-NO) 14 = 3 Form C (3PDT)* 3. Coil Input: A = AC, 50/60 Hz.* D = DC* 4. Mountings: 1 = PLAIN CASE, SOCKET MOUNT.* T = TOP FLANGE CASE.* 5 = BRACKET MOUNT CASE.* 5. Terminal & Contact Material: 3 = .047" (1.19mm) printed circuit board; silver. 5 = .187" (4.75mm) quick connect/solder; silver-cadmium oxide.* 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. (For 277VAC, consult factory.)* See coil data tables. * Options included in VDE file. Our authorized distributors are more likely to stock the following items for immediate delivery. KUIP-14A15-120 KUGP-7D55-24 KUIP-14D15-12 KUIP-5A55-120 KUIP-14D15-24 KUIP-11D55-12 KUIP-11D55-24 Ordering Information High Voltage DC Switching Typical Part No. B KUEP -3 A 1 5 -120 1. Basic Series & Type: KUEP = Enclosed relay with magnetic blow-outs. 2. Contact Arrangement: 3 = 1X (SPST-NO-DM) 7 = 2A (DPST-NO) 11 = 2C (DPDT) 3. Coil Input: A = AC 50/60 Hz. D = DC 4. Mountings: 1 = PLAIN CASE; 3 = with indicator lamp.* *Indicator lamps are available on models with the following coils: 5 = BRACKET MOUNT CASE 6-24VAC and DC, 110VDC and 120-240VAC. Only models with T = TOP FLANGE CASE. 120-240VAC coils are UL recognized. 5. Terminal & Contact Material: 5 = .187" (4.75mm) quick connect/solder; silver- 7 = .047' (1.19mm) printed circuit; silver-cadmium-oxide. cadmium-oxide. 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. (For 277VAC, consult factory.) Our authorized distributors are more likely to stock the following items for immediate delivery. KUEP-3A15-120 KUEP-3D15-110 KUEP-11D15-12 KUEP-3D15-12 KUEP-7D15-24 KUEP-11D15-24 KUEP-3D15-24 KUEP-11A15-120 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 725 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information 15 Amp Switching Typical Part No. B KUM -14 A 1 8 -120 1. Basic Series & Type: KUMP KUM = 15 amp open relay KUMP = 15 amp enclosed relay 2. Contact Arrangement: 1 = 1A (SPST-NO) 2 = 1B (SPST-NC) 3 = 1X (SPST-NO-DM) 4 = 1Y (SPST-NC-DB) 5 = 1C (SPDT) 6 = 1Z (SPDT-NC-NO [DB-DM]) 7 = 2A (DPST-NO) 8 = 2B (DPST-NC) 11 = 2C (DPDT) 12 = 3A (3PST-NO) 13 = 3B (3PST-NC) 14 = 3C (3PDT) 3. Coil Input: A = AC, 50/60 Hz. D = DC 4. Mountings: Type KUM KUMP OPEN STYLE 1 = PLAIN CASE; A = PLAIN CASE, #6-32 STUD LOCATING TAB; 1 = #6-32 stud, .218" 2 = with test button. B = with test button. (5.54mm) locating 3 = with indicator lamp.* C = with indicator lamp.* tab. 4 = with test button & indicator lamp.* D = with test button & indicator lamp.* 2 = 2-hole bracket, 5 = BRACKET MOUNT CASE; E = PLAIN CASE, TAPPED CORE, LOCATING TAB; #6-32 tapped. 6 = with test button. F = with test button. 3 = #6-32 tapped core, 7 = with indicator lamp.* G = with indicator lamp.* .125" (3.18mm) 8 = with test button & indicator lamp.* H = with test button & indicator lamp.* locating tab. 9 = STUD ON END OF PLAIN CASE. T = TOP FLANGE CASE. 4 = #6-32 tapped core, .218" (5.54mm) locating tab. *Indicator lamps are available on models with the following coils: 5 = #6-32 tapped core, 6-24VAC and DC, 110VDC and 120-240VAC. Only models with no locating tab. 120-240VAC coils are UL recognized. 5. Terminal & Contact Material: Type 1 & 2 Pole Models 3 Pole Models Codes 6,8,9,G 6,8,9 Available 6 = .205" (5.21mm) quick connect/solder; silver-cadmium-oxide. 8 = .187" (4.75mm) quick connect/solder; silver-cadmium-oxide. 9 = .047" (1.19mm) printed circuit; silver-cadmium-oxide. G = .250" (6.35mm) quick connect; silver-cadmium-oxide. (Not available on 3 pole models.) 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC (For 277VAC, consult factory.) Our authorized distributors are more likely to stock the following items for immediate delivery. KUMP-11A18-24 KUMP-11D18-12 KUMP-14A18-24 KUMP-14D18-24 KUMP-11A18-120 KUMP-11D18-24 KUMP-14A18-120 KUMP-11A18-240 KUMP-11D18-110 KUMP-14D18-12 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 726 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions Open Relays X Is For Terminal Dimensions. Bracket Type See Terminal Drawings. Seated Heights For Open Relays 2.43 MAX.* 1.437 (61.72) .19 1.391" (35.33mm) for #6-32 stud (36.50) 2.33 MAX.** X (4.8) X with .218" (5.54mm) locating tab. (59.18) 2.29 MAX.*** 1.52" (38.6mm) for bracket (58.17) with 2-#6 32 tapped holes. .63 .63 X (16.0) (16.0) 1.282" (32.56mm) for #6-32 tapped core 2.27 MAX.* with .125" (3.18mm) or .218" (5.54mm) locating tab. (57.7) 2.171 MAX.** .16 2.046" (51.97mm) for relay (55.14) (2) #6-32 THREAD (4.1) 2.125 MAX.*** with printed circuit terminals. TAPPED HOLES (53.98) Stud Type 1.468 MAX. 2.27 MAX.* (37.29) STUD TYPE also available with .125" (3.18mm) (57.7) .031 REF. .031 REF. tab, as well as without stud and locating tab. (.79) (.79) 2.171 MAX.** Models without stud have core tapped #6-32 1 2 3 (55.14) THREAD, .25" (6.4mm) minimum depth. 4 5 6 2.125 MAX.*** 1.391 (53.98) 1.282 MAX. 7 8 9 (35.33) (35.56) .218 *Dimensions with .250" (6.35mm) terminals. 1.687 MAX. (5.54) .109 MAX. A B (42.85) **Dimensions with .110" (2.79mm) or (2.77) .205"(5.21mm) terminals. 1.39 MAX.* .31 .065 (7.9) (35.3) ***Dimensions with .187" (4.75mm) terminals. (1.65) .437 1.29 MAX.** .150 (11.10) TAB WIDTH (32.8) #6-32 (3.81) 1.25 MAX.*** THREAD (31.8) Enclosed Relays Plain Case Core and Stud Mount Cases .187 (4.75) DIA. 1.968 MAX.† PUSH-TO-TEST BUTTON .288 X (49.99) AVAILABLE ON KUP, (7.32) 1.906 MAX.‡ & KUMP (48.41) 1.43 MAX. .130 (36.27) 1.531 MAX. .219 MAX. (3.30) 1.74 MAX. (38.89) (5.56) (44.2) 1.968 MAX.† 1 2 3 (49.99) 4 5 6 1.906 MAX.‡ 1.406 MAX. STUD with 7 8 9 (48.41) (35.71) #6-32 THREAD .312 1.39 MAX.* X or CORE TAPPED A B (7.92) (35.3) #6-32 1.29 MAX.** .437 ± .010 (32.8) X (11.10 ± .25) 1.25 MAX.*** X Is For Terminal Dimensions. (31.8) X See Teminal Drawings. X †Dimensions with .250" (6.35mm) terminals. Top Flange Case ‡Dimensions with .110" (2.79mm), .187" (4.75mm and .205" 5.21mm) terminals. .078 TYP. 1.518 MAX. (1.98) (38.56) *Dimensions with .250" (6.35mm) terminals. **Dimensions with .110" (2.79mm) or 1 2 3 .205" (5.21mm) terminals 1.713 ± .003 4 5 6 (43.51 ± .08) ***Dimensions with .187" (4.75mm) terminals. 1.373 ± .010 7 8 9 1.989 ± .003 (34.87 ± .25) (50.52) A B Stud on End Case 1.968 MAX. 2.248 MAX. (49.99) (57.10) .178 TYP. .38 1.906 MAX. (4.52) (9.7) (48.41) .085 MAX. Bracket Mount Case (2.16) .312 .078 R. TYP. PUSH-TO-TEST BUTTON 2.90 MAX. .625 TYP. TYP. (73.7) (1.98) AVAILABLE ON KUP (15.88) (7.92) X & KUMP .75 (19.1) 1.531 MAX. #6-32 THREAD (38.89) .06 .16 (1.52) (4.1) X .375 X 1.968 MAX.† .437 (9.53) (49.99) .07 2.500 (11.10) 1.906 MAX.‡ (1.8) (63.50) (48.41) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 727 specified. Refer to inside back cover. 1.406 MAX. (35.71) 1.128 (28.65) ➛ ➛ Catalog 1308242 Issued 3-03 P&B Outline Dimensions (Continued) Relay Front Diagrams Relays With 1-3 Pole Relays .250" (6.35mm) Terminals 4 Pole Relays 1.531 MAX. 1.531 MAX. 1.531 MAX. (38.89) (38.89) (38.89) 1 2 3 4 1 2 3 1 2 3 1 2 3 4 5 6 7 8 4 5 6 4 5 6 1.406 MAX. 1.406 MAX. 1.406 MAX. 9 10 1 1 12 7 9 (35.71) 7 8 9 (35.71) (35.71) A B A B A B Terminal Dimensions .110" (2.79mm) .205" (5.21mm) .250" (6.35mm) Quick ConnectQuick Connect Quick Connect .035 .093 .156 .109 (.89) (2.36) (2.77) .034 (3.96) .070 DIA. (.86) (1.78) .250 ± .003 HEADER .205 ± .002 HEADER (6.35 ± .08) .035 .110 (5.21 ± .05) HEADER (.89) (2.79) .280 .035 (7.11) .311 REF. .134 .285 (.89) (7.90) (3.40) (7.24) .032 .305 THICKNESS .316 REF. (.81) .312 (7.75) (8.03) (7.92) .358 REF. .032 THICKNESS (9.09) (.81) THICKNESS .032 (0.81) Printed .187” (4.75mm) Circuit Quick Connect .093 .156 ➛ .125 (2.36) (3.96) (3.18) .180 ➛ .187 ± .002 Note: All drawings shown oversize. HEADER HEADER (4.57) (4.75 ± .05) ➛ .250 .078 .237 .156 (6.02) (6.35) (1.98) (3.96) .047 ➛ .268 REF. .281 REF. (1.19) (6.81) (7.14) .032 .020 THICKNESS THICKNESS (.81) (.51) Wiring Diagrams *1 Form X 1 Form C *2 Form A *2 Form C 3 Form C 4 Form C 2 4 1 3 1 3 1 3 2 2 – – 4 6 5 6 7 8 5 4 6 4 6 4 5 6 + + – – – + 7 7 9 7 9 7 8 9 9 10 11 12 – – + + B A A B A B A B A B A B *Recommended Load Polarity for Optimum Arc Suppression. PC Board Layouts (Bottom Views) 1 Form X 3 Pole Models 4 Pole Models .076 DIA. TYP. .206 .076 DIA. TYP. .076 DIA. TYP. .206 (1.93) (5.23) (1.93) (1.93) (5.23) .626 .328 .328 (15.90) (8.33) .626 (8.33) .626 (15.90) (15.90) .875 .170 (22.23) (4.32) .437 .340 (11.10) (8.64) .510 .875 (12.95) (22.23) 1.020 (25.91) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 728 specified. Refer to inside back cover. ➛ ➛ ➛ ➛ ➛ Catalog 1308242 Issued 3-03 P&B Sockets For KU Series Relays Through 3 Poles Socket Selection Table Stock items are boldfaced. For KUP, KUEP, KUGP, KUIP, and KUMP relays, through 3 poles, with .187" (4.75mm) quick connect termination. Socket Socket Termination Hold-Down Spring 27E043 Solder eyelet 20C228 or 20C254* 27E046 PC board, .144" (3.66mm) terminals 20C228 or 20C254 27E067 .187" (4.75mm) quick connect 20C228 or 20C254 27E121 Screw terminals 20C314 (2 per socket required) 27E305 PC board, .184" (4.67mm) terminals 20C228 or 20C254 27E396 .187" (4.75mm) quick connect* 20C254 27E893 Screw terminals† 20C318 * 20C228 held in place by socket hold-down screw where as 20C254 snaps onto socket. ** Snap-in mounting. † DIN rail mounting. Hard Mount Sockets For Relays Through 3 Poles 27E067 27E043 .50 TYP. Nylon sockets with .187" (4.75mm) quick .165 DIA. (12.7) connect, solder or printed circuit terminals (4.19) are available for KUEP, KUGP, KUIP, KUMP, 2 HOLES and KUP relays, through 3 poles, with .187" 1.250 1.250 (4.75mm) quick connect terminals. (31.75) (31.75) 1.370 2.03 All are rated 15 amps and UL recognized, File (34.80) (51.56) E59244 and CSA certified File LR15734 27E043–with solder eyelet terminals. 27E067–with .187" (4.75mm) quick connect .125 .125 (3.18) (3.18) terminals. .875 ± .010 .297 .297 .250 .250 (22.23 ± .25) (7.54) (7.54) 1.50 (6.35) (6.35) (38.1) .34 MAX. .34 MAX. (8.64) (8.64) The 27E043 and 27E067 use chassis cutout shown on this page. 1.375 (34.93) 27E046, 27E305 Suggested Socket 27E396 Socket With Printed Circuit Terminals PC Board Layout Snap-In Socket For Relays Through 3 Poles Nylon snap-in socket with .187" (4.75mm) quick .50 TYP . .875 2 HOLES .437 connect terminals is available for KUEP, KUGP, KUIP, (12.7) (22.23) .165 DIA. .076 DIA. (11.10) KUMP, and KUP relays, through 3 poles, with .187" (4.19) (1.93) .218 (4.75mm) quick connect terminals. Snap-in sockets (5.54) reduce labor by eliminating time consuming screw or 1.687 rivet mounting. Preassembled wiring harnesses may 1.370 2.03 (42.85) .626 also be used as the sockets are designed to snap into (34.80) (51.56) (15.90) 1.076 the chassis from either front or back. All are rated 15 (27.33) .090 TYP. amps and UL recognized, File E59244. The 27E396 (2.29) uses chassis cutout shown on this page. .328 .125 .875 ± .010 .180 TYP. .156 TYP. 27E396–with .187" (4.75mm) quick connect terminals. (8.33) (3.18) (4.57) (22.23 ± .25) .297 (3.96) 1.50 (7.54) (38.1) .023 (.58) 27E046 HAS TERMINALS .144" (3.66 mm) LONG. 27E305 HAS TERMINALS .184" (4.67 mm) LONG. .396 (10.06) Recommended Chassis Cutout Recommeded Chassis Cutout For Hard Mount Sockets For Snap-In Sockets 1.260 (32.00) 1.395 (35.43) .020 .875 (.51) .065 TYP . (22.23) 1.270 .239 (1.65) 1.375 (32.26) (6.07) .281 (34.93) 1.687 (7.14) (42.85) 1.270 .110 (32.26) (2.79) 1.395 4 PLACES (35.43) Recommended chassis thickness .156 DIA. (3.96) .031" (.79mm) to .062" (1.57mm). .208 2 HOLES .260 (5.28) (6.60) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 729 specified. Refer to inside back cover. 1.687 ± .010 (42.85 ± .25) 1.687 ± .010 (42.85 ± .25) Catalog 1308242 Issued 3-03 P&B Sockets For KU Series Relays Through 3 Poles (continued) 27E121 27E893 Screw Terminal Socket Screw Terminal, Din Rail Snap-Mount Socket (use with mounting track 24A110) The 27E121 socket offers screw termination for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3 poles, with .187" (4.75mm) The 27E893 DIN rail, snap-mount socket offers screw termination quick connect terminals. This socket stacks on 1.700" (43.18mm) centers. for KUEP, KUGP, KUIP, KUL, KUMP and KUP relays, through 3 poles, with When surface mounting, two #6-32 screws of suitable length are required. .187" (4.75mm) quick connect terminals. This socket is constructed with a When track mounting, two 24A071 retainer clips (not shown) are required. spring-loaded latch which allows it to be quickly snapped onto or removed The 27E121 is rated 15 amps and is UL recognized, File E59244, CSA from a “top hat” style mounting track. No special tools or extra hardware certified, File LR15734. is required for installation. The 27E893 is UL rated 15 amps, 94V-0, File E59244 and CSA rated 10 amps, File LR15734. Terminal Location .895 MAX. Top View 1.550 (22.73) 1.700 ± .010 (39.37) .540 (43.18 ± .25) 6 5 4 (13.72) Terminal .850 ± .010 Location 3 2 1 (21.59 ± .25) .315 MIN. Top View 1.500 (8.00) (38.10) 6 5 4 3.000 3 2 1 (76.20) 1.500 .156 TYP. (38.10) (3.96) .156 TYP . (3.96) B A 9 8 7 3.150 MAX. .317 TYP . (80.01) (8.04) B A 1.030 1.703 (26.16) (43.26) 9 8 7 .390 1.450 MAX. (9.91) (36.83) 1.900 MAX. #6-32 SCREWS & (48.26) CAPTIVE WASHERS Sockets For KU Series 4 Pole Relays Socket Selection Table Stock items are boldfaced. For 4 pole KUP relays with .110" (2.79mm) quick connect termination. Socket Socket Termianation Hold-Down Spring 27E415 .187" (4.75mm) quick connect 20C228 or 20C254 27E419 PC board 20C228 or 20C254 27E867* Screw terminals 20C254 * Use 40G432 insulator pad or customer supplied alternative. Hard Mount Sockets For 4 Pole Relays Suggested Socket Screw Terminal Socket For 4 Pole Relays PC Board Layout 27E415–with .187" (4.75mm) quick connect/solder terminals. 27E867 offers screw termination for 4 pole KUP relays 27E419–with printed circuit terminals. See PC board with .110" (2.79mm) quick connect/socket mount .076 DIA. TYP. .206 layout at right. terminals. Rated 10 amps and is UL recognized, File (1.93) (5.23) E59244. Note: Only 4 pole KUP relays with .110" (2.79mm) quick connect terminals can be used with 4 pole hard mount sockets. .156 DIA. .250 ± .010 #6-32 SCREWS .50 TYP. .328 (3.96) (6.35 ± .254) .150 MAX. (12.7) (8.33) (2) MTNG. HOLES .626 .165 ± .005 (3.81) .060 TYP. (15.90) (4.19 ± .13) 5 + 9 (1.52) 2 HOLES 1 A .170 ++ + + 2 10 (4.32) 1.687 .340 ++ + 6 7 1.370 (42.85) 1.250 (8.64) 2.03 3 ++ + 11 (31.75) (34.80) .510 (51.6) 4 B ++ + + (12.95) 8 12 .062 REF. 1.020 + (1.57) (25.91) 1.750 ± .010 .125 .875 .230 ± .030 (44.45 ± .254) (3.18) (22.23) (5.84 ± .762) .770 MAX. 3.50 ± .030 .297 27E415 uses same chassis cutout as 1.50 (19.56) (88.9 ± .762) (7.54) .250 27E043. (38.1) (6.35) .32 MAX. (8.1) .461 MAX. W/QC TERMINALS (11.71) W/PC TERMINALS Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 730 specified. Refer to inside back cover. 2.250 ± .010 (57.15 ± .254) 2.750 ± .015 (69.96 ± .381) Catalog 1308242 Issued 3-03 P&B KUP93 series General Purpose 3 to 10 Amp, Multicontact AC or DC Relay File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features • AC coils 24, 120 & 240V 50/60 Hz.; DC 12 & 24VDC. DC Must Nominal • Contact arrangement to 3PDT. Nominal Resistance Operate Coil • Sockets available for all models. Voltage in Ohms Voltage Current • Accepted pin pattern for HVAC industry. ± 10%* (mA) • Primarily designed for the HVAC industry. DC 12 120 9.0 100 Coils 24 472 18.0 51 AC 24 72 20.4 115 Coils 120 1,700 102.0 24 240 7,200 204.0 12 *AC coils, ± 15% Contact Data @ 25°C Material: Fine silver or silver-cadmium oxide. Operate Data @ 25°C Must Operate Voltage: DC Coils: 75% of nominal voltage or less. Contact Ratings AC Coils: 85% of nominal voltage or less. Operate Time (Excluding Bounce): 15 milliseconds, typical, Material UL/CSA Ratings Life Expected at nominal voltage. Release Time (Excluding Bounce): Fine silver 5A @ 28VDC or 240VAC, 80% PF, DC Coils: 10 milliseconds, typical, at nominal voltage. 1/10 HP @ 120VAC, 1/4 HP @ 240VAC 100,000 AC Coils: 10 milliseconds, typical, at nominal voltage. Silver- 10A @ 28VDC or 240VAC, 80% PF, cadmium 1/4 HP @ 120VAC,1/3 HP @ 240VAC 100,000 oxide 10 FLA, 30 LRA @ 120VAC, 5 FLA,15 LRA @ 240VAC 30,000 Environmental Data Temperature Range: Storage: All Coils: -45°C to +105°C. Initial Dielectric Strength Operating: Between Open Contacts: 500V rms. DC Coils: -45°C to +70°C. Between Adjacent Contacts: 1,500V rms. AC Coils: -45°C to +45°C. Between Contacts and Coil: 1,500V rms. Coil Data @ 25°C Mechanical Data Nominal Power: DC Coils: 1.2 Watts. Termination: .187" x .020" quick connect. AC Coils: 2.7VA. Enclosures: Clear polycarbonate dust cover. Initial Insulation Resistance: 100 megohms, min., at 25°C. Weight: 3.0 oz. (86g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 731 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B KUP93 11 A 2 1 -24 1. Type: KUP93 = Enclosed general purpose relay. 2. Contact Arrangement: 14 = 3 Form C (3PDT) 3. Coil Input: A = AC D = DC 4. Mounting: 1 = PLAIN CASE; 5. Terminals, Contact Material & Rating: 1 = .187" (4.75mm) quick connect, silver, 5 amps. 3 = .187" (4.75mm) quick connect, silver-cadmium oxide, 10 amps. 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. Our authorized distributors are more likely to stock the following items for immediate delivery. No items in this series typically are stocked. Outline Dimensions Wiring Diagrams 3 Form C 1.406 MAX. .187 TYP . 5 (35.71) 2 (4.75) 8 6 9 3 4 1 7 C2 C1 1.531 MAX. (38.89) .054 DIA. 1.906 MAX. (1.37) (48.41) .250 (6.35) KUP93 Sockets Socket PC Board Layout (Component Side of Board) .218 REF. .205 DIA. (5.54) .790 (5.21) 20.07 (2 HOLES) .395 .161 ± .005 .276 (10.03) (4.09 ± .13) 2.350 (7.01) DIA. (2) HOLES .062 (59.69) .338 (1.57) MTG. HOLE (8.58) 1.858 .737 .157 ± .003 (47.19) (18.72) (3.99 ± .08) 1.858 .710 (47.19) (18.03) .097 ± .004 (2.46 ± .10) .790 .469 ± .015 .465 DIA. (11) HOLES (20.07) (11.91 ± .38) (11.81) .100 .317 1.250 (2.54) (8.05) (31.75) KUP93 Socket Number Socket P C Socket With Color Terminals Natural Nylon 27E168** **UL Recognized, file E22575 Socket: Rated 10 amperes. Will accept .187" (4.75mm) quick-connect terminals of all KUP93 relays. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 732 specified. Refer to inside back cover. 1.308 (33.22) Catalog 1308242 Issued 3-03 SCHRACK RM series RM2/3/7 2/3 Pole 10/16 Amp RM5/6 VDE 3mm Contact Gap RM8 25 Amp File E214025 NR 5330, NR 5365, NR 5333 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features AC Coil Data @ 25°C • Contact arrangements to 3PDT. DC DC Nominal Nominal • Plug-in or PC terminals. • Push to test button and mechanical indicator. Nominal Operate Drop-out Resistance Resistance Coil Coil Voltage Voltage Voltage in Ohms in Ohms Current Current • RM 5/6 VDE approved with 3mm contact gap. VAC VAC VAC ±10% ±10% (mA) (mA) RM 2 RM 5 RM 2 RM 5 RM 3 RM 6 RM 3 RM 6 Contact Data @ 25°C RM 7 RM 7 Arrangements: RM 8 RM 8 RM 2/3/7: 2 Form C (DPDT) and 3 Form C (3PDT). 06 4.8 2.4 5.3 4.7 381.7 476.7 RM 5/6: 2 Form A (DPST-NO) and 3 Form A (3PST-NO). 12 9.6 4.8 24.0 19.5 182.5 225.8 RM 8: 2 Form C (DPDT). 24 19.2 9.6 86.0 80.0 94.2 109.2 Material: Silver-cadmium oxide. 48 38.4 19.2 345.0 320.0 47.5 54.2 Expected Mechanical Life: 20 million operations minimum. 60 48.0 24.0 544.0 500.0 37.8 43.7 Contact Ratings: 115 92.0 46.0 2,000.0 1,850.0 20.6 23.0 UL/CSA @ 25°C 230 184.0 92.0 8,300.0 7,500.0 10.1 11.7 RM 2/5: 16A, 250VAC G.P., 30,000 Ops. 400 320.0 160.0 27,500.0 23,500.0 5.8 6.5 16A, 28VDC G.P., 30,000 Ops. 1 HP, 120VAC G.P., 30,000 Ops. 1HP, 240VAC G.P., 30,000 Ops. RM 3/6: 10A, 250VAC G.P., 30,000 Ops. 10A, 28VDC G.P., 30,000 Ops. RM 3/6/7: 1 HP, 120VAC, 30,000 Ops. 1/2 HP, 240VAC, 480VAC, 600VAC, 30,000 Ops. 1.5 HP, 240VAC, 3 Phase, 30,000 Ops. RM 7: 16A, 250VAC G.P., 30,000 Ops. 16A, 10VDC G.P., 30,000 Ops. RM 8: 25A,. 240VAC, G.P., 30,000 Ops. Operate Data 1.5 HP, 120VAC, G.P., 30,000 Ops. Must Operate Voltage: see coil data. 2 HP, 240, G.P., 30,000 Ops. Operate Time : Approximate ms VDE @ 35°C RM RM RM RM 2: 16A, 400VAC, 100,000 Ops. 2/3/7 5/6 8 RM 3/6: 10A, 400VAC, 100,000 Ops. Pull-in 15 15 15 RM 5/7: 16A, 400VAC, 100,000 Ops. Drop Out 10 10 15 RM 8: 25A, 250VAC, 10,000 Ops. Bounce 3 4 3 Switching Rate: 1000 ops/hr max. at rated load. Initial Dielectric Strength Between Open Contacts: 1,500VAC (RM 5/6 2,500VAC). Between Coil and Contacts: 2,500VAC. Creepage/Clearance coil-contact: 6/3.5mm (RM 8 4/2.8). DC Coil Data @ 25°C Environmental Data DC DC Nominal Nominal Nominal Operate Drop-out Resistance Resistance Coil Coil Temperature Range: Voltage Voltage Voltage in Ohms in Ohms Current Current Operating: -45°C to maximum °C listed below. VDC VDC VDC ±10% ±10% (mA) (mA) RM2 RM3 RM5 RM6 RM7 RM8 RM 2 RM 5 RM 2 RM 5 DC Coil +70°C +60°C +60°C +60°C +60°C +65°C RM 3 RM 6 RM 3 RM 6 AC Coil +55°C +55°C +50°C +50°C +50°C +40°C RM 8 RM 7 RM 8 RM 7 Vibration: 06 4.5 0.9 32 24 187.5 250.0 RM2/3/7: 30 to 150 Hz at 5g N/O, 2g N/C 12 9.0 1.8 110 86 109.1 139.5 RM5/6: 30 to 150 Hz at 12g N/O. 24 18.0 3.6 475 345 50.5 69.6 RM8: 30 to 150 Hz at 10g N/O, 5g N/C 48 36 7.2 2,000 1,340 24.0 35.8 60 45 9.0 2,850 2,200 21.1 27.3 110 82.5 16.5 10,000 7,300 11.0 15.1 221 165 33 40,000 30,000 5.5 7.3 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 733 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RM2/3/7 Max. DC Load Breaking Capacity 2/3 POLE 10/16A Contact Life 7 16 D 10 10 E A: 1 contact 5 B: 2 contacts in series 6 C: 3 contacts in series 10 A C 1 D: RM 2, RM 7 E: RM 3 B 0.5 5 10 0.1 10 20 30 40 50 100 200 300 4 10 0 1 23 45 6 7 89 10 DC Voltage (VDC) Breaking Capacity (kVA) AC Coil Operating Range DC Coil Operating Range 220 220 200 200 180 180 160 160 140 140 B A: RM 2 A: RM 2, RM 3 A C 120 B: RM 3 120 B: RM 7 C: RM7 A B 100 100 80 80 60 60 0 +20 +40 +60 +80 +100 0 +20 +40 +60 +80 +100 Ambient T emperature (°C) Ambient T emperature (°C) RM5/6 2/3 POLE 10/16A Max. DC Load Breaking Capacity (Contact gap 3 mm) Contact Life 7 16 10 C 10 5 6 10 A: 1 contact. 1 A B: 2 contacts in series. B C: 3 contacts in series. 0.5 5 10 0.1 10 20 30 40 50 100 200 300 4 10 DC Voltage (VDC) 0 1 23 45 6 7 89 10 Breaking Capacity (kVA) DC Coil Operating Range AC Coil Operating Range 220 220 200 200 180 180 160 160 140 140 120 120 100 100 80 80 60 60 0 +20 +40 +60 +80 +100 0 +20 +40 +60 +80 +100 Ambient T emperature (°C) Ambient T emperature (°C) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 734 specified. Refer to inside back cover. Applied Coil Voltage Operations Applied Coil Voltage Operations % of Rated Nominal % of Rated Nominal Applied Coil Voltage DC Current (A) Applied Coil Voltage DC Current (A) % of Rated Nominal % of Rated Nominal Catalog 1308242 Issued 3-03 SCHRACK RM8 2 POLE 25A Contact Life Max. DC Load Breaking Capacity 7 10 30 20 10 6 10 5 1 A: 1 contact. A B B: 2 contacts in series. 5 10 0.5 4 10 0.1 0 1 23 45 6 7 89 10 10 20 30 40 50 100 200 300 Breaking Capacity (kVA) DC Voltage (VDC) DC Coil Operating Range 220 200 180 160 140 120 100 80 60 0 +20 +40 +60 +80 +100 Ambient T emperature (°C) Ordering Information Typical Part Number B RM 2 3 2 024 1. Basic Series: RM = General purpose relay. 2. Contact Arrangement and Rating: 2 = 2 Form C (DPDT) 16 Amp 3 = 3 Form C (3PDT) 10 Amp 5 = 2 Form A (DPST-NO) 16 Amp 3mm Contact Gap 6 = 3 Form A (3PST-NO) 10 Amp 3mm Contact Gap 7 = 3 Form C (3PDT) 16 Amp 8 = 2 Form C (DPDT) 25 Amp (Available only with enclosure 5,8, and 9.) 3. Test: 0 = without push-to-test-button. 3 = with push-to-test-button. 4. Enclosure: 2 = Plain Case .187 (4.75mm) quick-connect (Not available with RM 8). 3 = Bracket Mount Case 0.187 (4.75mm) quick connect. (Not available with RM 8) 5 = Bracket Mount Case 0.250 (6.35mm) quick connect. 7 = Plain Case printed circuit (not available with RM8). 8 = Case with snap-on attachment on top 0.250 (6.35mm) quick-connect. 9 = Case with snap-on attachment on side 0.250 (6.35mm) quick-connect. 5. Coil Voltage: Standard with LED with with LED Standard with LED with with LED protection and protection and diode protection diode diode protection diode 006 006 OA6 LA6 =6VDC 506 R06 — — =6VAC 012 L12 0B2 LB2 =12VDC 512 R12 — — =12VAC 024 L24 0C4 LC4 =24VDC 524 R24 — — =24VAC 048 L48 0E8 LE8 =48VDC 548 R48 — — =48VA 060 L60 0G0 LG0 =60VDC 560 R60 — — =60VAC 110 M10 1B0 MB0 =110VDC 615 S15 — — =115VAC 220 N21 2C1 NC1 =220VDC 730 T30 — — =230VAC 900 V00 — — =400VAC Our authorized distributors are more likely to stock the following items for immediate delivery. RM203012 RM205024 RM302024 RM502524 RM602615 RM702615 RM703615 RM805615 RM202012 RM202024 RM203024 RM205524 RM302524 RM502615 RM702012 RM703012 RM805012 RM203524 RM205615 RM302615 RM602024 RM702024 RM703024 RM805024 RM202524 RM202615 RM203615 RM302012 RM502024 RM602524 RM702524 RM703524 RM805524 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 735 specified. Refer to inside back cover. Applied Coil Voltage Operations % of Rated Nominal DC Current (A) Catalog 1308242 Issued 3-03 SCHRACK Outline Dimensions RM .187 quick connect terminals RM .250 quick connect terminals, with brackets 1.516 MAX. 1.398 MAX. 1.516 MAX. (38.50) (35.50) (38.50) .157 .059 (4.00) (1.50) 1.909 MAX. .303 (48.50) (7.70) 2.520 (64.00) 1.909 MAX. 2.303 (48.50) (58.50) 2.894 MAX. .020 .189 (73.50) (.50) (4.80) .031 RM with PCB terminals (0.80) .248 .059 1.516 MAX. 1.398 MAX. (6.30) (1.50) (38.50) (35.50) 1.398 MAX. (35.50) 2.185 MAX. (55.50) RM with snap-on attachment .157 (4.00) Wiring Diagrams (Bottom Views) RM2/8 2 Pole RM3/7 3 Pole PC Board Layout (Bottom View) (1) 12 (3) 32 (2) 22 (3) 32 (1) 12 – – .240 (4) 14 (6) 34 (5) 24 (4) 14 (6) 34 – – (6.10) .079 DIA. TYP. (7) 11 (9) 31 (7) 11 (8) 21 (9) 31 (2.00) + + .469 (11.90) .795 (A) A1 (B) A2 (A) A1 (B) A2 (20.20) 1.098 (27.90) RM5 2 Pole RM6 3 Pole (4) 14 (5) 24 (6) 34 .429 (4) 14 (6) 34 – – (11.00) (7) 11 (8) 21 (9) 31 (7) 11 (9) 31 + + .858 (21.79) (A) A1 (B) A2 (A) A1 (B) A2 RM Sockets and Accessories RM78702 RM78700/701 .295 (7.50) RM78700 has QC Terminals RM78701 has Solder Terminals .295 2.03 1.677 (7.50) (51.60) 1.299 (42.60) (33.00) .744 (18.90) 2.03 1.280 1.677 .441 1.071 .165 (51.60) (32.50) (42.60) (11.20) (27.20) (4.20) .433 1.488 .437 (11.00) (37.80) (11.10) .866 .866 .165 (22.00) (22.00) (4.20) Hold-Down Spring RM28802 1.488 1.398 (37.80) (35.50) RM78705 .630 16A, 250VAC, Socket with Screw Terminals (16.00) 1.658 1.041 (42.20) Hold-Down Spring RM28802 (26.50) 1.398 .984 (35.50) (25.00) Socket Selection Table Stock items are boldfaced. 1.165 Socket Socket Termination Hold-Down Spring (4.20) RM78700 .187(4.75)QC Terminals RM28802 3.206 1.375 RM78701 Solder Terminals RM28802 (81.60) (35.00) RM78702 .142(3.61)PCB Terminals RM28802 RM78705 Screw Terminals Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 736 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B KRPA, KRP, KA, KR series 5 to 10 Amp General Purpose Relay File E29244, E22575, E81558 (KR Hermetic) File LR15734 KRPA KRP KA Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Initial Dielectric Strength • Industry standard octal-type termination for quick installation. Between Open Contacts: 500V rms. • Contact arrangements from 1 Form C (SPDT) to 3 Form C (3PDT). Between All Elements: 1,500V rms. • Indicator lamp and push-to-test options available on certain models. • The KRPA is the automated manufactured version of the KRP. • Hermetically sealed option available with KR UL recognized for Class I Coil Data @ 25°C Div. 2 Hazardous locations, Groups A, B, C, D. Nominal Power Maximum Power Contact Data @ 25°C KRP AC 2VA Enclosed Models - 4VA Arrangements: See Ordering Information Table. KRPA DC 1.2W Enclosed Models - 3W Materials: Silver or silver-cadmium oxide, with or without gold flashing. KA AC 2VA Open Models - 4VA Expected Life: 10 million operations min., mechanical; 100,000 DC 125mW per movable arm Open Models - 4W operations min. @ rated loads. Duty Cycle: Continuous. KA, KRP, KRPA UL/CSA Contact Ratings @ 25°C Initial Insulation Resistance: KRP, KRPA - 1000 Megohms, min. (Except KR) KA - 100 Megohms, min. Contact Code Arrangement Contact Rating Y 1, 2, 3 Poles 5A @ 120VAC Coil Data @ 25°C (Silver) 3A @ 240VAC 1/10HP @ 120VAC Nominal DC Resistance (Ω) Nominal Coil 1/6HP @ 240VAC Voltage ±10% Current (mA) G&N 1, 2, 3 Poles 10A @ 240VAC 632 188 (Silver-Cad. 1/2 HP @ 240VAC 12 120 100 Oxide) 1/3HP @ 120VAC DC 24 472 51 Coils 48 1,800 26.6 KR–E (Herm. Sealed) UL Contact Ratings @ 25°C 110 10,000 11.5 Class I, Div. 2, Hazardous Loc. 220 Use 110V relay with 10,000 Ω 5W Resistor in series Contact Code Arrangement Contact Rating 6 6 335 AC 12 24 168 Y 1, 2, 3 Poles 5A @ 120VAC (Silver) 3A @ 240VAC Coils 24 85 84 120 2,250 17.5 1/10HP @ 120VAC 1/6HP @ 240VAC 240 9,110 8.75 G&N 1, 2, 3 Poles 10A @ 240VAC (Silver-Cad. Oxide) 1/6 HP @ 120VAC Operate Data @ 25°C KR–E (Herm. Sealed) UL Contact Ratings @ 25°C Must-Operate Voltage: UL 508 Industrial Control DC: 75% or less of nominal voltage. Contact Code Arrangement Contact Rating AC: 85% or less of nominal voltage. Operate Time (Excluding Bounce): Y , G 1, 2, 3 Poles 3A @ 120VAC 15 milliseconds typical @ nominal voltage. (Silver) 3A @ 28VDC Release Time (Excluding Bounce): 1/10HP @ 120VAC 10 milliseconds typical @ nominal voltage. KRP, KRPA Factory Ratings Contact Code Arrangement Contact Rating Environmental Data Y 1, 2, 3 Poles 5A @ 28VDC, 120VAC, 80% PF Temperature Range: Open Models: AC: -45°C to +70°C. G&N 1, 2, 3 Poles 10A @ 28VDC, 120VAC, 80% PF 6A @ 250VAC DC: -45°C to +85°C. Enclosed Models: AC: -45°C to +55°C. KA UL Contact Ratings DC: -45°C to +70°C. Contact Code Series Contact Ratings 1 YKA 5A @ 120VAC, 3A @ 240VAC, Mechanical Data 1/10 HP @ 120VAC, 1/6 HP @ 240VAC Open Models: Solder terminals. 2 GKA 10A @ 120VAC, 6A @ 240VAC Enclosed Models: Octal-type plug. 1/6 HP @ 120VAC, 1/3 HP @ 240VAC Enclosures: Transparent polycarbonate (except KR). Hermetically sealed metal case available with KR only. 1 Listed by C.S.A. for 5A @ 120VAC 80% PF Weight: KA: 1.7 oz. (48.2g) approximately. 2 Listed by C.S.A. for 10A @ 120VAC 80% PF KRPA, KRP: 3.0 oz. (85g) approximately. Note: See KRPA, KRP, KA, KR-E Ordering Information table. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 737 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B KRPA -5 A Y -120 1. Series: KRPA (Newer version, enclosed) KRP (Older version, enclosed) KR (Hermetically sealed option ‘E’only) KA (Open style) 2. Contact Arrangement: 5 = 1 Form C (SPDT) 11 = 2 Form C (DPDT) 14 = 3 Form C (3PDT) 3. Coil Input: A = AC, 50/60 Hz. D = DC 4. Contact Rating and Indicator Lamp Option: TYPE KRPA KRP KR KA Codes Y, G, N, Y, G, N, Y, G, Y, G, Available Leave Blank = Silver, no indicator lamp for hermetically sealed KR (option E below). Y = Silver, no indicator lamp G = Silver-cadmium oxide, no indicator lamp N = Silver-cadmium oxide, with indicator lamp* 5. Options: Leave Blank = No options (except KR). E = Hermetically Sealed Option (KR only). 6. Coil Voltage: Up to 240VAC Up to 125VDC *Indicator Lamp not available on 25-90V coils. Only 120-240VAC and 110VDC models are UL recognized and CSA certified. Our authorized distributors are more likely to stock the following items for immediate delivery. KRPA-11AN-24 KRPA-14AG-120 KA-5AG-120 KR-11DGE-24 KRP-14AN-120 KA-5AY-120 KR-14AGE-120 KRPA-11AN-120 KRPA-14AG-240 KRP-14AY-120 KRPA-11AN-240 KRPA-14AN-24 KA-5DG-6 KR-14DGE-24 KRP-14DG-12 KA-5DG-12 KRP-5AG-120 KRPA-11AY-6 KRPA-14AN-120 KRP-14DG-24 KRPA-11AY-12 KRPA-14AN-240 KA-5DG-110 KRP-11AG-24 KRP-14DG-110 KA-11AG-120 KRP-11AG-120 KRPA-11AY-24 KRPA-14AY-24 KRP-14DN-24 KRPA-11AY-120 KRPA-14AY-120 KA-11AY-6 KRP-11AG-240 KRPA-5AG-24 KA-11AY-24 KRP-11AN-24 KRPA-5AG-120 KRPA-11AY-240 KRPA-14AY-240 KRPA-11DG-6 KRPA-14DG-12 KA-11AY-120 KRP-11AN-120 KRPA-5AY-120 KA-11DG-12 KRP-11AY-120 KRPA-5DG-6 KRPA-11DG-12 KRPA-14DG-24 KRPA-11DG-24 KRPA-14DG-48 KA-11DG-24 KRP-11DG-12 KRPA-5DG-12 KA-11DG-110 KRP-11DG-24 KRPA-5DG-24 KRPA-11DG-48 KRPA-14DG-110 KRPA-11DG-110 KRPA-14DN-24 KA-14AG-120 KRP-11DG-48 KRPA-5DY-12 KA-14AY-120 KRP-11DG-110 KRPA-5DY-24 KRPA-11DN-12 KRPA-14DY-24 KRPA-11DN-24 KA-14DG-24 KRP-11DG-125 KRPA-11AG-6 KA-14DG-110 KRP-11DN-12 KRPA-11AG-12 KRPA-11DN-110 KRPA-11DY-12 KR-11AE-120 KRP-11DN-24 KRPA-11AG-24 KR-11AGE-120 KRP-11DY-24 KRPA-11AG-120 KRPA-11DY-24 KRPA-14AG-12 KR-11DE-24 KRP-14AG-120 KRPA-11AG-240 KR-11DGE-12 KRP-14AG-240 KRPA-11AN-12 KRPA-14AG-24 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 738 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B KRP-3-H series 20 Amp Small AC or DC Relays File E22575 KRP-3-H Features Coil Data @ 25°C • 1 Form X (SPST - NO - DM) contact rating of 20A. See chart on page 105. • Heavy copper alloy movable contact arms. Nominal Power: DC Coils: 1.2W • Twin silver-cadmium oxide contacts. AC Coils: 2.0VA • Many uses in automation controls and other applications requiring high Initial Insulation Resistance: 1,000 megohms. current switching. Operate Data @ 25°C Contact Data @ 25°C Must-Operate Voltage: DC: 75% of nominal voltage. Arrangement: 1 Form X (SPST - NO - DM). AC: 85% of nominal voltage. Ratings: UL Rating: 20A @ 120VAC, 3/4 HP @ 120VAC. Operate Time: 15 milliseconds approximate (Excluding Bounce). Factory Rating: 20A @ 120VAC, 80% PF; 1 HP @ Release Time: 10 milliseconds approximate (Excluding Bounce). 120/240VAC. Material: Twin, silver-cadmium oxide. Expected Life: 2.5 million operations min., mechanical. 100,000 Environmental Data operations at rated contact load. Temperature Range: Enclosed Models: AC: -45°C to +55°C. DC: -45°C to +70°C. Initial Dielectric Strength Between Open Contacts: 500V rms, 60 Hz. between all elements. Mechanical Data Mounting: Socket mounting. Termination: Octal-type plug. Enclosure: Polycarbonate enclosure with octal-type mounting. Weight: 2 oz. (57g) approximately. Ordering Information Typical Part No. B KR P -3 D H -12 1. Basic Series: KR 2. Type: P = Enclosed (20 amp models available only with Contact Arrangement 3 and Material H.) 3. Contact Arrangement: 3 = 1 Form X (SPST - NO - DM) 4. Coil Input: A = AC D = DC 5. Contact Material & Rating: H = Silver-cadmium oxide, 1/4" (6.35mm) dia., 20 amps. 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. Our authorized distributors are more likely to stock the following items for immediate delivery. KRP-3AH-120 KRP-3DH-24 KRP-5AG-120 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 739 specified. Refer to inside back cover. 1.406 MAX. (35.71) 2.281 MAX. (57.94) 1.406 MAX. (35.71) 2.0 MAX. (50.8) Catalog 1308242 Issued 3-03 P&B Outline Dimensions KA Series 1.468 MAX. (37.29) 1.06 MAX. .44 (26.9) 1 STUD .25 (11.2) #6-32 .15 (6.4) 1.92 MAX. .312 THREAD (3.8) (48.8) (7.92) Tolerances on .XX Decimals ± .02 (± .5) Unless Otherwise Specified Tolerances on .XXX Decimals ± .005 (± .13) Unless Otherwise Specified KR Series Enclosures Type “P” Clear Dust Cover For KRPA and KRP For KRP3-H 1.406 MAX. 1.531 MAX. (35.71) (38.89) .031 (.79) Hermetically Sealed Enclosure Hold-Down Spring (KR only) 20C176 KRPA & KRP 20C206 KAP and KRP3 Durable stainless steel spring can be moved Octal Plug aside for relay removal or installation. Mounts with same machine screws or 1.656 rivets that secure socket (53.98) to chassis. Two .156" (3.96mm) dia. holes required. 1.437 (36.50) Height: 2.125" (53.98mm) max. Wiring Diagrams (Bottom Views) KA KR11 KR14* KRP3AH KR5 KAP11 KAP14 KAP5 KRP11 KRP14 KRP5 KRPA11 KRPA14 KRPA5 8 8 1 1 1111 8 *The hermetically sealed KR14 10 2 7 2 7 2 7 2 has pins 5 and 6 reversed. 9 3 6 3 3 6 3 6 8 4 5 5 4 5 4 7 5 4 6 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 740 specified. Refer to inside back cover. 1.375 MAX. (34.93) Catalog 1308242 Issued 3-03 P&B Sockets For KRP, KRPA Series Relays The following sockets are normally maintained in stock for immediate delivery. Screw Terminal, DIN Rail Snap-Mount Sockets (Use with mounting track 24A110) 27E891 Terminal 27E892 Terminal 10A, 300VAC Location 10A, 300VAC Location Top View Top View 1.295 2.060 (32.89) (52.32) 21 87 1 11 1.005 2 10 1.018 (25.53) 3 9 (25.84) 2.010 2.035 (51.05) (51.69) .165 (4.19) .165 DIA.TYP. 4 8 (4.19) 5 7 3 4 5 6 DIA.TYP 6 .312 TYP . .580 .312 TYP . .580 (7.92) (14.73) (7.92) (14.73) 2.332 .770 1.575 (59.22) (19.56) (40.01) .970 (24.64) .970 (24.64) Sockets have M3.5 screw terminals which accept up to two #12 AWG wires. Rated 10 amps @ 300VAC and meets UL 94V-0. Screw Terminal Sockets 27E122 27E123 10A, 300VAC 10A, 300VAC 8-pin 11-pin 1.296 2.060 (32.92) (52.32) .648 .062 1.030 (16.46) (1.57) (26.16) 1.296 (32.92) .156 DIA. TYP. .648 (3.96) 2.385 MAX. .062 (16.46) (60.58) (1.57) 1.188 2.385 MAX. (30.18) .093 (60.58) (2.36) ++ ¢ .210 TYP. .781 (5.33) (19.84) 1.188 (30.18) 1.572 MAX. (39.93) = 6-32 SCREWS & ¢ 1.156 .210 TYP. CAPTIVE WASHERS .093 (29.36) (5.33) (2.36) 2.322 MAX. = 6-32 SCREWS & .925 MAX. (58.98) CAPTIVE WASHERS (23.50) ¢ .925 MAX. (23.50) Terminal 65 4 3 Location 87 65 4 Terminal Location 78 1 2 910 11 1 2 3 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 741 specified. Refer to inside back cover. .156 TYP. (3.96) .156 TYP. (3.96) Catalog 1308242 Issued 3-03 SCHRACK MT series 10 Amp General Purpose Relay File E214025 NR 6182 NR 95.1, 10956.02 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • DPDT or 3PDT contact arrangements. Must Operate Voltage: See Coil Data table. • 4 amp bifurcated contact available. Operate Time: 12 ms typical, at nom. voltage. • AC and DC coils. Release Time: 5 ms typical, at nom. voltage. • Protection Diode available (DC coils). Bounce Time: 4 ms typical, at nom. voltage. • Mechanical indicator - all models. Switching Rate: 1,200 ops./hr. max. at rated load. • Electrical indicator available. • Test actuator with front operated finger protected push to test button Environmental Data and integral locking test tab. Temperature Range: Operating: -45°C to +60°C DC coil. Contact Data @ 25°C -45°C to +50°C AC coil. Vibration: 30 to 1,500 Hz. at 5g N/O, 2g N/C. Arrangements: 2 Form C (DPDT). Shock: 50g N/O, 10g N/C. 3 Form C (3PDT. Material: 10 amp; Silver-nickel 90/10 with or without gold plating. 4 amp; Silver-nickel 90/10 with gold plating. Electrical Life Expected Mechanical Life: 20 million operations minimum. 7 10 Ratings: UL/CSA NO/NC @ 25°C: 250VAC 4 amp (Bifurcated) 250VAC Resistive 30,000 ops. Resistive Load 6 10 amp 240VAC Resistive 30,000 ops. 10 1/2 HP 240VAC 30,000 ops. 1/4 HP 120VAC 30,000 ops. B300 Pilot duty 30,000 ops. 5 10 VDE @ 35°C: 10 amp 250VAC Resistive 100,000 ops., DC Coil, AC Coil N/O. 20,000 ops., AC Coil N/C. 4 10 04 2 6810 121416 Initial Dielectric Strength Switching Current (A) Between Open Contacts: 1,500VAC. Between Coil and Contacts: 2,500VAC. Max. DC Load Breaking Capacity Between Poles: 2,500VAC. Creepage/Clearance Coil-Contact: 4/2.8mm. 50 Coil Data @ 25°C 10 Nominal Coil Power: 1.2W, 2.3VA. 5 A: 1 contact. B: 2 contacts in series. DC Data 2 C: 3 contacts in series. A B C 1 DC Must Must Nominal Nominal Resistance Operate Release Coil 0.5 Voltage in Ohms Voltage Voltage Current VDC ±10% VDC VDC (mA) 0.1 06 32 4.5 0.6 187.5 10 20 30 40 50 100 200 300 12 110 9 1.2 109.1 DC Voltage (V) 24 475 18 2.4 50.5 48 2,000 36 4.8 24.0 Coil Operating Range 60 2,850 45 6.0 21.1 110 10,000 82.5 11.5 11.0 2.2 220 40,000 165 22.0 5.5 2.0 AC Data 1.8 DC Must Must Nominal Nominal Resistance Operate Release Coil 1.6 Voltage in Ohms Voltage Voltage Current A: DC coil. A 1.4 VAC ±10% VAC VAC (mA) B: AC coil. 1.2 06 5.3 4.8 2.4 381.7 B 12 24 9.6 4.8 182.5 1.0 24 86 19.2 9.6 94.2 0.8 48 345 38.4 19.2 47.5 0.6 60 544 48 24 37.8 0 +20 +40 +60 +80 +100 115 2,000 92 46 20.6 Ambient Temperature (°C) 230 8,300 184 92 10.1 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 742 specified. Refer to inside back cover. Operations U /U DC Current (A) B N ➤ ➤ ➤ ➤ ➤ Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B MT 3 2 1 012 1. Basic Series: MT = General purpose relay. 2. Contact Arrangement: 2 = 2 Form C (DPDT) 8 pin 3 = 3 Form C (3PDT) 11 pin 3. Contact Material: 2 = Silver Nickel 90/10 with mechanical actuator. 3 = Silver Nickel 90/10, gold plated, with mechanical actuator. B = 4 amp Silver Nickel 90/10 bifurcated contact with gold plating. 4. Test: 1 = DC coil with test-button. 3 = DC coil with test-button and LED. 6 = AC coil with test-button. 8 = AC coil with test-button and LED. 5. Coil Voltage: Standard With protection diode Standard With protection diode 006 = 6VDC 0A6 = 6VDC 006 = 6VAC N/A 012 = 12VDC 0B2 = 12VDC 012 = 12VAC N/A 024 = 24VDC 0C4 = 24VDC 024 = 24VAC N/A 048 = 48VDC 0E8 = 48VDC 048 = 48VAC N/A 060 = 60VDC 0G0 = 60VDC 060 = 60VAC N/A 110 = 110VDC 1B0 = 110VDC 115 = 115VAC N/A 220 = 220VDC 2C0 = 220VDC 230 = 230VAC N/A Our authorized distributors are more likely to stock the following items for immediate delivery. MT226024 MT226230 MT321024 MT326115 MT221012 MT221024 MT226115 MT321012 MT326024 MT326230 Wiring Diagrams (Bottom Views) Outline Dimensions ➤ (6) (5) (7) 21 22 24 1.398 MAX. (8)32 (4)12 (5)22 (4)12 (35.50) (3)14 (9)34 (3)14 (6)24 (10) (2)A1 (7)A2 (2) (1) (11) A2 A1 (1) (8) 11 31 2.244 MAX. 11 21 ➤ 1.398 MAX. ➤ (57.00) (35.50) 2.717 MAX. ➤ (69.01) MT Sockets and Accessories MT78750 MT78755 10A, 400VAC 10A, 400VAC 11 Pin Socket 8 Pin Socket 1.496 MAX. .059 Mounting Hole Centers Mounting Hole Centers 1.496 MAX. .059 (38.0) (1.50) (38.0) (1.50) 24 22 12 14 32 22 M3 34 24 14 12 M3 M3 M3 6 54 3 8 7 5 34 9 1.102 1.102 (28.00) (28.00) 2.441 MAX. 100° 2.441 MAX. (62.0) 100° (62.0) 1.220 1.272 (31.00) .902 7 8 1 2 (32.30) .953 10 11 4 1 2 (22.9) (24.2) A2 21 11 A1 A2 31 21 11 A1 .366 .366 (9.30) .157 .157 (9.30) (4.00) (4.00) 1.024 1.024 (26.00) (26.00) Hold-Down Spring MT28800 Hold-Down Spring MT28800 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 743 specified. Refer to inside back cover. ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ ➤ Catalog 1308242 Issued 3-03 SCHRACK MT Sockets and Accessories (continued) Module-capable Sockets MT78745 MT78740 10A, 400VAC 10A, 400VAC 8 Pin Socket 11 Pin Socket 1.496 MAX. 1.496 MAX. .118 (38.0) (38.0) (3.00) 24 22 14 12 34 32 24 22 14 12 .126 DIA. 6 54 3 .126 DIA. 9 8 7 5 34 2.95 (3.2) (3.2) (75.0) .22 .22 .394 (5.6) (5.6) (10.0) .165 DIA. .165 DIA. .394 (4.2) (4.2) 7 7 8 1 2 10 10 11 4 1 2 A2 A2 21 11 A1 A2 A2 31 21 11 A1 1.024 1.18 1.18 (26.00) 2.44 (30.0) (30.0) (62.0) 2.76 (70.0) Socket Selection Table Timing Module Selection Table Stock items are boldfaced. Stock items are boldfaced. Socket Socket Type and Termination Hold-Down Spring Module Type MT78750 11-pin, DIN Rail w/ Screw Terminals MT28800 MTMZ0W00 Delay ON timing module MT78755 8-pin, DIN Rail w/ Screw Terminals MT28800 MTMF0W00 Multifunction timing module MT78740 11-pin, module-capable, DIN Rail w/ Screw Terminals MT28800 MT78745 8-pin, module-capable, DIN Rail w/ Screw Terminals MT28800 LED and Protection Module Selection Table Stock items are boldfaced. Module Type MTMT00A0 Protection diode 1N4007 MTMU0524 RC-network 24 – 115 VAC MTMU0730 RC-network 230 VAC MTML0024 LED 24 VAC / VDC MTML0615 LED 115 VAC Timing Module Functional Data Timing Function Diagrams Nominal Voltage: 24 – 240 VAC / VDC U/t Delay ON Frequency: 48 – 63 Hz. R Precision of Time Setting: ± 0.5%. Readiness for Repetition: ≤ 0.5% or 5 ms. U/t Influence of Temperature: ≤ 0.1% /°C. Delay OFF S Time Range Switchable: 0.05 s – 240 h in 8 ranges. Ambient Temperature: –25°C to +55°C. R U/t Single shot leading edge S R U/t Single shot trailing edge S R U/t Single shot S R U/t Delay ON triggered by signal contact R U/t Flasher starting with pause R U/t Flasher starting with pulse R Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 744 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK 0419 series 16 Amp RAST 5 Relay File E214025 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data • 2 Form A (DPST-NO). Temperature Range: • 16 amp rated current. Operating: -20°C to +90°C. • Compatible with RAST 5 connector. Vibration: (5 to 500 Hz.) 2g. • Contact gap exceeds 3 mm; 4kV/8mm contact-to-coil spacing. Shock (destruction): 80g. • Designed for European domestic appliances. • Snap-in or screw mounting. • Dust cover. Mechanical Data Contact Data Termination: Rast 5. Arrangements: 2 Form A (DPST-NO). Enclosure: Plastic dust cover. Weight: 3.2 oz. (90 g) approximately. Material: Silver-cadmium oxide or silver-nickel. Expected Mechanical Life: 2 million operations. Ratings: Current: 16A. Voltage: 250VAC. Power (breaking): 4,000 VA. Voltage (breaking): 400VAC. Current (making, max. 4s at 10% duty cycle): 25A. Contact Life AC Coil Models 16 amp resistive, 250VAC, 100,000 ops. 12 amp resistive, 250VAC, 100,000 ops. DC Coil Models 16 amp resistive, 250VAC, 250,000 ops. 12 amp resistive, 250VAC, 250,000 ops. Initial Dielectric Strength Between Open Contacts: 2,000Vrms. Between Coil and Contacts: 4,000Vrms. Creepage/Clearance: 8/8mm. Coil Data DC @ 20°C Nominal Coil Power: AC Coils: 2.0-2.5 VA; DC Coils: 1.3W. DC Must Nominal Nominal Resistance Operate Drop-out Maximum Coil Coil Operating Range Voltage in Ohms Voltage Voltage Voltage Current VDC ±10% VDC VDC VDC (mA) DC Coils 12 118 7.7 0.9 19.5 102.0 24 470 15.5 1.8 39.0 51.0 AC Coils (50 Hz) 110-120 1,650 93.0 18.0 132.0 20.0 220-240 6,600 187.0 36.0 264.0 10.0 380-400 20,000 323.0 60.0 440.0 6.0 Nominal coil voltage (Un) Operate Data Must Operate Voltage: See Coil Data table. Operate Time (typical): 15 ms. Release Time (typical): 15 ms. Bounce Time (typical): 4 ms. Switching Rate: 9,000 ops./hr. max. at rated load. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 745 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B 0419 01 14 01 00 1. Basic Series: 0419 01= Power relay with RAST 5 connection. 2. Coil Voltage: 31 = 12VDC 29 = 24VDC 14 = 110-120VAC 10 = 220-240VAC 09 = 380-400VAC 3. Contact Material: 01 = Silver-cadmium oxide. 03 = Silver-nickel 90/10 4. Mounting: 00 = Snap mounting, 1.0 mm panel 01 = Snap mounting, 1.5 mm panel 02 = Screw mounting Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions and Wiring Diagrams .602 (15.3) .405 .602 (10.3) (15.3) 1.90 – .008 (48.2 – .2) .85 – .004 .047 [.067] 1.06 ± .004 .295 (21.6 – .1) .177 [.197 (1.2 [1.7]) (27 ± .1) .85 – .004 (7.5) .374 (4.5 [5.0]) (21.6 – .1) .157 .197 .567 + .004 (9.5) (14.4 + .1) (4) (5) .030 [.043] 1.85 (.75 [1.1]) (47) .039 1.85 .157 .165 ± .004 (1) (47) (4) (4.2 ± .1) .433 .433 (11) (11) .079 .473 .216 (2) (11.5) (5.5) .473 (11.5) .075 1.48 .650 ± .004 .051 (1.9) (16.5 ± .1) (37.6) (1.3) .075 1.85 + .008 1.48 .051 .984 ± .004 (1.9) (47 + .2) (37.6) (1.3) 1.85 + .008 (24 ± .1) .984 ± .004 (47 + .2) (24 ± .1) Screw Mount Version Snap Mount Version Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 746 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B DIN Rail Mount Screw Terminal Socket Track Mounting System File E59244 File LR35144 Features Location of Socket Dimensions • Sockets mount on standard 35mm DIN track & P&B “top hat” track. Typical Relay Base Socket Part Number Page • Spring loaded integral clip holds sockets securely to the track. KRPA (DPDT) 8-pin octal-type 27E891 741 • Small screwdriver can be used to release sockets from track. KRPA (3PDT) 11-pin octal-type 27E892 741 • Any available hold-down springs must be ordered separately. See Relay & Socket Usage Chart beginning on page 747. KUP 11-blade square 27E893 730 • End clips can be used to further stabilize sockets on track. KH, PCL 14-blade square 27E894 712 K10, PCLH 8-blade square 27E895 722 RT (code 1) 5-blade square RT78624 452 RT (codes 3 & 5) 8-blade square RT87625 452 MT (DPDT) 8-pin octal-type MT78755 743 MT (3PDT) 11-pin octal-type MT78750 743 RM 11-blade square RM78705 736 PT (DPDT) 8-blade square PT78702 719 PT (3PDT) 11-blade square PT78703 719 PT (4PDT) 14-blade square PT78704 719 24A110 – DIN Rail Style Mounting Track 24A110 mounting track is designed to accept snap-mount sockets, as well as all other P&B screw terminal sockets. Track is made of lightweight, 36.00 ± .060 sturdy extruded aluminum and is shipped in three-foot (914cm) lengths with (914.4 ± 1.52) 1.375 ± .010 3.00 6.00 mounting holes on six-inch (152mm) centers. Track can be cut to shorter (34.93 ± .254) (76.2) (152.4) lengths or used end-to-end. .750 .187 .405 ± .007 (19.05) (4.75) (10.29 ± .178) 24A071 & 40G432 – End Clip 24A071 steel mounting clip with one #6-32 screw 7/16" (11.1mm) long is 40G432 used with a 40G432 insulator to prevent sockets from moving sideways or sliding off the end of the track. 24A071 Our authorized distributors are more like to stock the items listed below in boldface. Part Number Description 24A110 DIN rail style extruded aluminum mounting track for DIN or standard sockets. 24A071 Steel mounting clip with one #6-32 screw 7/16" (11.1mm) long. Use with 40G432 below to make end clip. 40G432 Plastic insulator. Use with 24A071 above to make end clip. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 747 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 27E867 27E462 27E461 27E460 27E122 27E123 27E121 27E166 27E487 24A071 & 40G432 24A071 & 40G432 24A071 24A072 24A071 Conventional Screw Terminal Socket Track Mounting Sytem Features Track & Mounting Accessories •P&B DIN rail track accommodates a variety of sockets and relays. See Relay & Socket Usage Chart beginning on page 747. •Various clips are available to secure components to track. Location of Socket Dimensions 24A110 Typical Relay Base Socket Part Number Page K10 8-blade square 27E487 722 KH 14-blade square 27E166 712 KUP (3PDT) 11-blade square 27E121 730 40G432 KRPA (3PDT) 11-pin octal-type 27E123 741 KRPA (DPDT) 8-pin octal-type 27E122 741 24A072 R10 (DPDT) 10-blade square 27E460 708 R10 (4PDT) 16-blade square 27E461 708 24A071 R10 (6PDT) 22-blade square 27E462 708 KUP (4PDT) 14-blade square 27E867 730 Our authorized distributors are more like to stock the items listed below in boldface. Part Number Description 24A110 DIN rail style extruded aluminum mounting track 36" (914mm) long with holes on 6.0" (152.4mm) centers. Holes accept #8 screws. 24A071 Steel mounting clip with one #6-32 screw 7/16" (11.1mm) long. 24A072 Plastic twist mounting clip for 27E166, 27E122 and 27E123 sockets. Twist clip into track to hold socket in place, except when used on end of track. Use 24A071 on ends of track to lock first and last socket in place. 40G432 Plastic insulator for track or surface mounting. Use with 27E460, 27E461, 27E462 and 27E867 sockets. Track Mounting System – Chart below lists typical applications. See Relay & Socket Usage Chart on following pages for more detail. Socket Typ. Relay Component Hold Down Spring 24A110 Track Mounting Hardware Chassis Mounting 27E121 KUP 20C314 Hooks into slots below mounting 24A071 36" (914cm) strip will mount 19 Two suitable screws on 1.7" (43.2mm) centers. ears. Two hold downs required sockets. per socket. 27E122 KRPA See Socket Usage Chart. 24A071 36" (914cm) strip will mount 22 Two suitable screws on 1.296" (32.92mm) centers. 24A072 sockets. 27E123 KRPA See Socket Usage Chart. 24A071 36" (914cm) strip will mount 15 Two suitable screw on 1.296" (32.92mm) or 2.06" 24A072 sockets. (52.3mm) centers. 27E166 KHAU 20C297 Hooks into slots on side of 24A071 36" (914cm) strip will mount 30 Two suitable screws on .94" (23.9mm) centers. socket body. One hold down sockets. required per socket. 27E460 R10 20C249 Hooks into slots on side of 24A071 36" (914cm) strip will mount 16 Two 40G432 insulators and two suitable screws on 27E461 20C250 socket body. One hold down 40G432 27E460, 12 27E461 or 9 27E462 1.8" (45.7mm), 2.125" (53.98mm) or 2.812" 27E462 20C251 required per socket. sockets. (71.42mm) centers. 27E487 K10 20C297 Hooks into slots on side of 24A071 36" (914cm) strip will mount 31 Two suitable screws on 1.143" (29.03mm) centers. socket body. One hold down 24A072 sockets. required per socket. 24A072 can be used on small ear only. 27E867 KUP 20C254 Hooks into slots on side of 24A071 36" (914cm) strip will mount 13 Two 40G432 insulators and two suitable screws on (4PDT) socket body. One hold down. 40G432 sockets. 2.25" (57.15mm) centers. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 748 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 RELAY SOCKET USAGE CHART Relay and Socket Usage Chart Terminal Hold-Down Socket Relay Socket Type Spring Notes Page Comments 48K 27E122 Screw — — 741 (8-pin octal) 27E891 Screw 5 741 48K 27E123 Screw — — 741 (11-pin octal) 27E892 Screw 5 741 CB 27E122 Screw — — 741 (8-pin octal) 27E891 Screw 5 741 CB 27E123 Screw — — 741 (11-pin octal) 27E892 Screw 5 741 CD 27E122 Screw — — 741 (8-pin octal) 27E891 Screw 5 741 CD 27E123 Screw — — 741 (11-pin octal) 27E892 Screw 5 741 CG 27E122 Screw — — 741 (8-pin octal) 27E891 Screw 5 741 CG 27E123 Screw — — 741 (11-pin octal) 27E892 Screw 5 741 CH 27E122 Screw — — 741 (8-pin octal) 27E891 Screw 5 741 CH 27E123 Screw — — 741 (11-pin octal) 27E892 Screw 5 741 CK 27E122 Screw — — 741 (8-pin octal) 27E891 Screw 5 741 CK 27E123 Screw — — 741 (11-pin octal) 27E892 Screw 5 741 CL-41 & CL-44 27E043 Screw 20C228 or 20C254 — 729 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 27E046 PC 20C228 or 20C254 — 729 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 27E067 QC & Solder 20C228 or 20C254 — 729 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 27E121 Screw 20C314 — 730 Use 2 pieces 20C314 per socket. 27E396 QC & Solder 20C254 — 729 27E893 Screw 20C318 5 730 CL-51 27E043 Solder 20C247 — 729 20C247 held in place by socket hold down screw. 27E046 PC 20C247 — 729 20C247 held in place by socket hold down screw. 27E067 QC & Solder 20C247 — 729 20C247 held in place by socket hold down screw. 27E121 Screw 20C314 — 730 Use 2 pieces 20C314 per socket. 27E396 QC & Solder — 729 27E893 Screw 20C318 5 730 CN1 27E122 Screw — — 741 (8-pin octal) 27E891 Screw 5 741 CNM5 27E123 Screw — — 741 (11-pin octal) 27E892 Screw 5 741 CNS 27E122 Screw — — 741 (8-pin octal) 27E891 Screw 5 741 CNS 27E123 Screw — — 741 (11-pin octal) 27E892 Screw 5 741 CNT 27E123 Screw — — 741 (11-pin octal) 27E892 Screw 5 741 CR 27E122 Screw — — 741 (8-pin octal) 27E891 Screw 5 741 CS 27E122 Screw — — 741 (8-pin octal) 27E891 Screw 5 741 Note 1: Flange mount sockets pre-assembled on steel mounting plates. Grounding is not recommended for currents of 5 amps AC & above. Note 2: Listed hold-down springs cannot be used for R10S. Note 3: On R10L series hold down spring fits to the side of light emitting diode. Note 4: Use 40G432 insulator or suitable insulator (2 per socket). Note 5: Snap-mount relay sockets snap onto 24A110 mounting rail without extra hardware. Note 6: 27E893 cannot be used with KUIP and KUGP series relays. Relay and Socket Usage Chart continued on next page. Dimensions are shown for Dimensions are in inches over Specifications and availability reference purposes only. (millimeters) unless otherwise subject to change. 749 specified. Catalog 1308242 Issued 3-03 RELAY SOCKET USAGE CHART Relay and Socket Usage Chart Terminal Hold-Down Socket Relay Socket Type Spring Notes Page Comments CU-41 & CU-44 27E043 Solder 20C228 or 20C254 — 729 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 27E046 PC 20C228 or 20C254 — 729 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 27E067 QC & Solder 20C228 or 20C254 — 729 20C228 held in place by socket hold down screw whereas 20C254 snaps onto socket. 27E396 QC & Solder 20C254 — 729 27E400 Solder 20C254 — 729 27E121 Screw 20C314 — 730 Use 2 pieces 20C314 per socket. 27E893 Screw 20C318 5 730 CU-51 27E043 Solder 20C247 — 729 20C247 held in place by socket hold down screw. 27E046 PC 20C247 — 729 20C247 held in place by socket hold down screw. 27E067 QC & Solder 20C247 — 729 20C247 held in place by socket hold down screw. 27E121 Screw 20C314 — 730 Use 2 pieces 20C314 per socket. 27E396 QC & Solder — 729 27E893 Screw 20C318 5 730 GP CR0001 Screw CR0111 or CR0133 — 920 CR0002 Screw CR0111 or CR0133 — 920 CR0067 Screw CR0069 — 920 CR0095 Screw CR0070 or CR0155 — 920 IAC & IDC — — — — — Refer to page 1114 for I/O modules mounting board details. IACM & IDCM — — — — — Refer to page 1122 for Slim Line I/O modules mounting board details. K10 27E487 Screw 20C426 — 722 27E488 Solder 20C217 — 722 27E489 PC 20C217 — 722 27E895 Screw 20C426 5 722 KBP 27E123 Screw — — 741 (11-pin octal) 27E892 Screw 5 741 KH & KHA 27E006 Solder 20C217 — 712 (type-P,S,U,X) 27E007 PC 20C217 — 712 27E023 PC 20C217 — 712 27E166 Screw 20C297 — 712 27E894 Screw 20C426 5 712 KR Sealed 27E122 Screw — — 741 (8-pin octal) 27E891 Screw — 5 741 KR Sealed 27E123 Screw — — 741 (11-pin octal) 27E892 Screw — 5 741 KRP3-H 27E122 Screw — — 741 (8-pin octal) 27E891 Screw — 5 741 KRP & KRPA 27E122 Screw — — 741 (8-pin octal) 27E891 Screw — 5 741 KRP & KRPA 27E123 Screw — — 741 (11-pin octal) 27E892 Screw — 5 741 KUEP, 27E043 Solder 20C228 or 20C254 — 729 20C228 held in place by socket hold down screw whereas 20C254 KUGP, KUIP, snaps onto socket. KUMP & KUP 27E046 PC 20C228 or 20C254 — 729 20C228 held in place by socket hold down screw whereas 20C254 [1-3 poles snaps onto socket. with .187" 27E067 QC & Solder 20C228 or 20C254 — 729 20C228 held in place by socket hold down screw whereas 20C254 (4.75mm) QC] snaps onto socket. 27E121 Screw 20C314 — 730 Use 2 pieces 20C314 per socket. 27E396 QC & Solder 20C254 — 729 27E400 Solder 20C254 — 729 27E893 Screw 20C318 5, 6 730 KUL 27E043 Solder 20C247 — 729 20C247 held in place by socket hold down screw. with .187" 27E046 PC 20C247 — 729 20C247 held in place by socket hold down screw. (4.75mm) QC] 27E067 QC & Solder 20C247 — 729 20C247 held in place by socket hold down screw. 27E121 Screw 20C314 — 730 Use 2 pieces 20C314 per socket. 27E396 QC & Solder — 729 27E893 Screw 20C318 5 730 Note 1: Flange mount sockets pre-assembled on steel mounting plates. Grounding is not recommended for currents of 5 amps AC & above. Note 2: Listed hold-down springs cannot be used for R10S. Note 3: On R10L series hold down spring fits to the side of light emitting diode. Note 4: Use 40G432 insulator or suitable insulator (2 per socket). Note 5: Snap-mount relay sockets snap onto 24A110 mounting rail without extra hardware. Note 6: 27E893 cannot be used with KUIP and KUGP series relays. Relay and Socket Usage Chart continued on next page. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 750 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 RELAY SOCKET USAGE CHART Relay and Socket Usage Chart Terminal Hold-Down Socket Relay Socket Type Spring Notes Page Comments KUP 27E415 QC & Solder 20C228 or 20C254 — 101 20C228 held in place by socket hold down screw whereas 20C254 [4 pole snaps onto socket. with .110" 27E419 PC 20C228 or 20C254 — 101 20C228 held in place by socket hold down screw whereas 20C254 (2.79mm) QC] snaps onto socket. 27E867 Screw 20C254 4 101 MD0 27E006 Solder — — 712 27E007 PC — — 712 27E023 PC — — 712 27E166 Screw — — 712 27E894 Screw — 5 712 MT MT78750 Screw MT28800 — 743 For relays with 11-pin bases. MT78755 Screw MT28800 — 743 For relays with 8-pin bases. MT78740 Screw MT28800 — 744 For relays with 11-pin bases. Will accommodate function modules. MT78745 Screw MT28800 — 744 For relays with 8-pin bases. Will accommodate function modules. ML CR0001 Screw CR0111 or CR0133 — 920 CR0002 Screw CR0111 or CR0133 — 920 CR0067 Screw CR0069 — 920 CR0095 Screw CR0070 or CR0155 — 920 OAC & ODC — — — — — Refer to page 1114 for I/O module mounting board details. OACM & ODCM — — — — — Refer to page 1122 for Slim Line I/O modules mounting board details. ORWH 27E1064 PC — — 439 PCE 27E1064 PC — — 437 PT 27E006 Solder — — 719 Will accommodate 2- or 4-pole models. 27E220 PC — — 719 For use with 2-pole models. 27E023 PC — — 719 For use with 4-pole models. 27E894 Screw — 5 719 Will accommodate 2- or 4-pole models. PT78700 Screw — 5 719 Will accommodate 2- or 4-pole models. PT78702 Screw — 5 719 For 2-pole relays. Will accommodate function modules. PT78703 Screw — 5 719 For 3-pole relays. Will accommodate function modules. PT78704 Screw — 5 719 For 4-pole relays. Will accommodate function modules. R10, R10L & 27E125 Solder 20C249 2, 3 707 Tin plated terminals with grounding strip. R10S (2 pole) 27E162 Solder 20C249 2, 3 707 Tin plated terminals no grounding provision. 27E128 PC Stag. 20C249 or 20C259 2, 3 707 Tin plated terminals with grounding strip. 27E446 Solder 20C249 1, 2, 3 707 Tin plated terminals with grounding strip. 27E193 PC Stag. 20C249 or 20C259 2, 3 707 Tin plated terminals with grounding terminals. 27E212 PC Stag. 20C249 or 20C259 2, 3 707 Tin plated terminals no grounding provision. 27E342 PC In-Line 20C249 or 20C259 2, 3 707 Tin plated terminals no grounding provision. 27E317 Solder/Bkt. Mt. 20C249 2, 3 708 Tin plated terminals with grounding strip. 27E460 Screw 20C249 or 20C259 2, 3, 4 708 Tin plated terminals no grounding provision. R10, R10L & 27E126 Solder 20C250 2, 3 707 Tin plated terminals with grounding strip. R10S (4 pole) 27E163 Solder 20C250 2, 3 707 Tin plated terminals no grounding provision. 27E129 PC Stag. 20C250 2, 3 707 Tin plated terminals with grounding strip. 27E194 PC Stag. 20C250 or 20C259 2, 3 707 Tin plated terminals with grounding terminal. 27E213 PC Stag. 20C250 or 20C259 2, 3 707 Tin plated terminals no grounding provision. 27E629 PC In-Line 20C250 or 20C259 2, 3 707 Tin plated terminals no grounding provision. 27E461 Screw 20C250 or 20C259 2, 3, 4 708 Tin plated terminals no grounding provision. R10 & R10L 27E127 Solder 20C251 3 707 Tin plated terminals with grounding strip. (6 pole) 27E130 PC Stag. 20C251 or 20C259 3 707 Tin plated terminals with grounding strip. 27E630 PC In-Line 20C251 or 20C259 3 707 Tin plated terminals no ground provision. 27E462 Screw 20C251 or 20C259 3, 4 708 Tin plated terminals no grounding provision. RM RM78700 QC RM28802 — 736 RM78701 Solder RM28802 — 736 RM78702 PC RM28802 — 736 RM78705 Screw — 5 736 RT RP78601 PC RP16041 — 450 Use with Code 1. RP78602 PC RP16041 — 450 Use with Codes 3 & 5. RT78624 Screw RT16016 5 450 Use with Code 1. RT78625 Screw RT16016 5 450 Use with Codes 3 & 5. RT78626 Screw RT16016 5 450 Use with Codes 3 & 5. Note 1: Flange mount sockets pre-assembled on steel mounting plates. Grounding is not recommended for currents of 5 amps AC & above. Note 2: Listed hold-down springs cannot be used for R10S. Note 3: On R10L series hold down spring fits to the side of light emitting diode. Note 4: Use 40G432 insulator or suitable insulator (2 per socket). Note 5: Snap-mount relay sockets snap onto 24A110 mounting rail without extra hardware. Note 6: 27E893 cannot be used with KUIP and KUGP series relays. Relay and Socket Usage Chart continued on next page. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 751 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 RELAY SOCKET USAGE CHART Relay and Socket Usage Chart Terminal Hold-Down Socket Relay Socket Type Spring Notes Page Comments S89R11APP & 27E122 Screw — — 741 S89R11DPP 27E891 Screw 5 741 (8-pin octal) SCB, SCC, SCE 27E122 Screw — — 741 (8-pin octal) 27E891 Screw 5 741 SCB, SCC, SCE 27E123 Screw — — 741 (11-pin octal) 27E892 Screw 5 741 SCF BCSF11SC Screw — — 1218 SDAS-01 27E043 Solder — — 729 27E046 PC — — 729 27E067 QC & Solder — — 729 27E121 Screw 20C314 — 730 Use 2 pieces 20C314 per socket. 27E396 QC & Solder — — 729 27E893 Screw — 5 730 SRC 27E122 Screw — — 741 27E891 Screw 5 741 SRUDH 27E1064 PC 20C430 — 443 SRUUH 27E1064 PC 20C430 — 445 SSC, SST 27E122 Screw — — 741 (8-pin octal) 27E891 Screw 5 741 SSC, SST 27E123 Screw — — 741 (11-pin octal) 27E892 Screw 5 741 STA 27E043 Solder — — 729 27E046 PC — — 729 27E067 QC & Solder — — 729 27E121 Screw — — 730 27E396 QC & Solder — 729 27E893 Screw — 5 730 T7C 27E1064 PC 20C430 — 441 T7N 27E1064 PC — — 435 TR CR0001 Screw CR0111 or CR0133 — 920 CR0002 Screw CR0111 or CR0133 — 920 CR0067 Screw CR0069 — 920 CR0095 Screw CR0070 or CR0155 — 920 V23047 RP78602 PC — — 605 RT78625 Screw RP16104 5 605 Accommodates function modules. RT78626 Screw RP16104 5 605 Accommodates function modules. Note 1: Flange mount sockets pre-assembled on steel mounting plates. Grounding is not recommended for currents of 5 amps AC & above. Note 2: Listed hold-down springs cannot be used for R10S. Note 3: On R10L series hold down spring fits to the side of light emitting diode. Note 4: Use 40G432 insulator or suitable insulator (2 per socket). Note 5: Snap-mount relay sockets snap onto 24A110 mounting rail without extra hardware. Note 6: 27E893 cannot be used with KUIP and KUGP series relays. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 752 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 POWER RELAYS & CONTACTORS Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 38 .............................. Power Relay ..................................... 818 9100 .......................... Power Relay ..................................... 816 9400 .......................... Power Relay ..................................... 814 KUHP......................... Power Relay ..................................... 803 Transformers.............................. 201-212 2 Model 2000 ............... Definite Purpose Contactor .............. 828 Model 93-3100 .......... Definite Purpose Contactor .............. 834 Model 96-3100 .......... Definite Purpose Contactor .............. 830 Model 96-3186 .......... Definite Purpose Contactor .............. 838 Low-signal PC Board Relays. 301-336 3 Model 98-3100 .......... Definite Purpose Contactor .............. 832 Model A-3100............ Definite Purpose Contactor .............. 840 NOTE: A question tree that may help you in selecting an P25 ............................ Definite Purpose Contactor .............. 820 appropriate power relay or definite purpose contactor for your application can be found on the next page. P30/P40 ..................... Definite Purpose Contactor .............. 823 Mid-Range PC Board Relays ....... 19-21 4 P31/P41 ..................... Definite Purpose Contactor .............. 826 PM............................. Power Relay ..................................... 809 PRD ........................... Power Relay ..................................... 811 Power PC Board Relays ................ 22-35 RM C/D ..................... Power Relay ..................................... 805 5 S86R/S87R ................ Power Relay ..................................... 807 Relays with 6 Forcibly-Guided Contacts.............. 36-79 NOTE: In addition to the products described in this section of the databook, more power relays and contactors are also described in other sections. Following is a list. Plug-in/Panel Mount 7 General Purpose Relays............701-749 Power PC Board Relays 491 ........................................................................... 509 PCF........................................................................... 502 Power Relays & Definite T9A ........................................................................... 506 8 T90 ........................................................................... 504 Purpose Contactors ............... 801-842 T92 ........................................................................... 511 Plug-in/Panel Mount Relays Latching, Impulse & KRP-3-H .................................................................... 739 9 Rotary Relays ...............................149-154 RM8 ......................................................................... 733 Latching, Impulse Rotary & Special Application Relays Automotive Relays ......................141-148 136 ........................................................................... 916 10 S89R/S90R ............................................................... 912 Solid State Relays & I/O Modules Solid State Relays & SSR ........................................................................ 1104 11 Input/Output Modules ................195-207 SSRD ...................................................................... 1102 SSRQ...................................................................... 1108 SSRD ...................................................................... 1106 Time Delay Relays & Automotive Relays 12 Counters ........................................208-232 T72M ...................................................................... 1005 V23086 ................................................................... 1002 V2R......................................................................... 1012 VF4 ......................................................................... 1017 Sensors & Monitors ...................233-234 13 VF7 ......................................................................... 1021 VFM........................................................................ 1014 VKP......................................................................... 1007 High Performance Relays Power relays and contactors are also included in our and Contactors (overview) ....... 233-234 14 line of high performance products (see overview of product line in section 14 of this databook). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 801 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 POWER RELAYS & CONTACTORS Power Relay & Definite Purpose Contactor Question Tree This guide helps the user select one or more product series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, the user must assume ultimate responsibility for determining the suitability of a product for a particular application. Contact Switch Rating? Less than 40 amps* 40 amps* or More AC or DC AC or DC Coil? Coil? AC DC DC AC Coil Coil Coil Coil Number Number Number Number of Poles? of Poles? of Poles? of Poles? One Two Three Four Three Four One Two Pole Poles Poles Poles Pole Poles Poles Poles KUHP KUHP P25 PM PRD-3_P/R 96-3100 P40 93-3100 P30 PRD 98-3100 RM C/D S86R 96-3100 93-3100 S86R S87R 98-3100 P30 96-3186 93-3100 S87R PM 93-3100 A-3100 PRD PRD 9400 9100 9100 2000 38 96-3100 2000 Three Four One Two One Two Three Four Pole Poles Poles Poles Pole Poles Poles Poles KUHP KUHP P30 PM PRD-3_P/R None P40 P40 RM C/D S87R P31 P30 P31 S87R PRD P41 PRD 9100 9400 9100 * Typical loads for comparison purposes. See catalog pages for a given series for detailed rating specifications. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 802 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B KUHP series 30 Amp Power Relays File E22575 File LR15734-123 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features DC Must Nominal • AC coils 6-277VAC 50/60 Hz., DC 6-110VDC. Nominal Resistance Operate Coil • Contact arrangement up to DPDT. Voltage in Ohms Voltage Current • .250" combination push-on/solder terminals or PC terminals. ± 10%* (mA) • Side flange and top flange mounting. 6 32.1 4.5 187 • Designed to meet VDE space requirements. DC 12 120 9.0 100 Coils 24 472 18.0 51 • Class B coil insulation. 48 1,800 36.0 26.7 110 10,000 82.5 11 6 4.2 5.1 460 Contact Data @ 25°C 12 18 10.2 230 Arrangements: 1 Form C (SPDT) and 2 Form C (DPDT). AC 24 72 20.4 115 Material: Silver or silver-cadmium oxide. Coils 120 1,700 102.0 24 240 7,200 204.0 12 Expected Mechanical Life: 10 million operations. 277 10,250 235.5 9 *±15% for AC coils. Contact Ratings Contact UL/CSA Ratings Expected Arrangement Life Operate Data @ 25°C 1 Form C 30A 120/240VAC 100,000 Single Pole 1 HP @ 120VAC, ops. Must Operate Voltage: Double Throw 1 1/2 HP @ 240VAC DC Coils: 75% of nominal. 25A @ 28VDC AC Coils: 85% of nominal. 2 Form C 20A @ 120/240VAC 100,000 Operate Time (Excluding Bounce): 20 milliseconds, typical, at nominal Double Pole 3/4 HP @ 120VAC ops. voltage. Double Throw 1 1/2 HP @ 240VAC Release Time (Excluding Bounce): 20 milliseconds, typical, at nominal 20A @ 28VDC voltage. 7A @ 120VAC (Tungsten)* *NO contacts only. Initial Dielectric Strength Environmental Data Between Open Contacts: 1,200V rms. Temperature Range: (Operating) Between Adjacent Contacts: 3,750V rms. DC Coils: -45°C to +70°C. Between Contacts and Coil: 3,750V rms. AC Coils: -45°C to +45°C. Between Coil and Frame: 2,000V rms. Shock: 15g’s, 11 ms (non-operating). Vibration: .065" double amplitude, 10-55 Hz. Coil Data @ 25°C Voltage: 6-110VDC and 6-277VAC. Nominal Power: DC Coils: 1.2 Watts. Mechanical Data AC Coils: 2.7VA. Duty Cycle: Continuous. Termination: .250" quick connect/solder; and PC board. Initial Insulation Resistance: 100 megohms, min. Enclosure: Polycarbonate dust cover. Insulation: Class B, 130°C. Weight: 3.2 oz. (92g) approximately. Ordering Information Typical Part No. B KUHP- 11 A 5 1 -120 1. Basic Series and Type: KUHP = Enclosed 20/30 amp relay. 2. Contact Arrangement and Rating: 5 = 1C (SPDT); 30 amps. 11 = 2C (DPDT); 20 amps. 3. Coil Input: A = AC, 50/60 Hz. D = DC 4. Mountings: 1 = PLAIN CASE 5 = BRACKET MOUNT CASE T = TOP FLANGE CASE 5. Terminals and Contact Materials: 1 = .250" (6.35mm) quick connect/solder; silver-cadmium oxide. 7 = .047" (1.19mm) printed circuit; silver-cadmium oxide. 6. Coil Voltage: AC coils to 277VAC, 50/60 Hz. DC coils to 110VDC. NOTE: No sockets are available for this relay. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. KUHP-5A51-24 KUHP-5AT1-120 KUHP-5D51-24 KUHP-5DT1-24 KUHP-11A51-120 KUHP-11D51-12 KUHP-11DT1-12 KUHP-5DT1-12 KUHP-5A51-120 KUHP-5D51-12 KUHP-11A51-24 KUHP-11AT1-120 KUHP-11D51-24 KUHP-11DT1-24 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 803 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions Plain Case Top Flange Enclosure 1.393 MAX. 1.406 (35.38) .138 TYP. (35.71) (3.51) 1.875 ± .005 1.531 MAX. (47.63 ± .13) (38.89) 1.496 ± .015 2.382 MAX. (38.05 ± .38) (60.50) 1.968 MAX. (49.99) 2.461 MAX. .178 TYP. (62.51) (4.52) Terminal Dimensions Bracket Mount Case .250" (6.35mm) Quick Printed Circuit 1.406 MAX. Connect/Solder (35.71) .07 (1.78) .156 2.90 MAX. .035 .305 .250 (3.96) (73.66) .375 (.89) .047 (7.75) (6.35) (9.53) (1.19) 1.968 MAX. .125 DIA. .125 DIA. .312 TYP. (49.99) (3.18) (3.18) (7.92) .250 ± .003 HEADER HEADER (6.35 ± .08) .75 (19.05) 1.531 MAX. .106 .106 .305 (38.89) (2.69) (2.69) (7.75) .312 .312 .078 R. TYP. (7.92) (7.92) (1.98) .358 REF. .343 REF. .437 (9.09) (8.71) .625 TYP. 2.500 THICKNESS .032 THICKNESS .032 (15.88) (11.10) (63.50) (0.81) (0.81) .06 (1.52) Wiring Diagrams PC Board Layouts (Bottom Views) 1 Form C 2 Form C 1 Pole Model 2 Pole Model 1 Form A (Delete 2) 2 Form A (Delete 1 & 3) .243 .076 DIA. TYP. 1 Form B (Delete 5) 2 Form B (Delete 4 & 6) (6.17) (1.93) .875 2 1 3 .243 (22.23) (6.17) 5 4 6 .637 .240 7 7 9 (16.18) (6.10) .437 .240 AB AB (11.1) (6.10) .875 .397 .076 DIA. TYP. (22.23) (1.93) (10.08) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 804 specified. Refer to inside back cover. 1 2 3 4 5 6 7 9 A B 1 2 3 4 5 6 7 9 A B Catalog 1308242 Issued 3-03 SCHRACK RM C/D series 30 Amp Power Relays Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data • SPST-NO-DM or SPDT-DB-DM arrangements. Termination: .250” quick connects. • Flange-mount case. Enclosure: Plastic dust cover. • Optional push to test button. Weight: 2.86 oz. (81 g) approximately. • Available with LED indicator and protection diode. Contact Data @ 20°C Arrangements:1 Form X (SPST-NO-DM) and 1 Form Z (SPDT-DB-DM). Contact Life Material: Silver-cadmium oxide. Expected Mechanical Life: 10 million operations minimum. Rated Current: 30A. Rated Voltage: 250VAC. Maximum Breaking Capacity (AC): 7,500VA. Maximum Make Current (max. 4s at 10% duty cycle: 60A. Initial Dielectric Strength Between Open Contacts: 1,500VAC (RM 5/6 2,500VAC). Between Coil and Contacts: 2,500VAC. Creepage/Clearance: 2.8/4mm. Coil Data @ 20°C Voltage: 6-220VDC and 24-400VAC. Nominal Power: DC Coils: 1.2W; AC Coils: 2.8VA. Coil Data @ 20°C Maximum DC Load Breaking Capacity DC Nominal Nominal Operate Drop-out Resistance Coil Voltage Voltage Voltage in Current VDC VDC VDC Ohms (mA) DC Coils 6 4.5 0.6 32 ± 10% 187.5 12 9.0 1.2 110 ± 10% 109.1 24 18.0 2.4 475 ± 10% 50.0 48 36.0 4.8 2,000 ± 10% 24.0 60 45.0 6.0 2,850 ± 10% 21.1 110 82.5 11.0 10,000 ± 12% 11.0 220 165.0 22.0 40,000 ± 15% 5.5 AC Coils 24 19.2 9.6 80 ± 10% 109.2 48 38.4 19.2 320 ± 10% 54.2 60 48.0 24.0 500 ± 10% 43.7 115 92.0 46.0 1,850 ± 10% 23.0 230 184.0 92.0 7,500 ± 10% 11.7 DC Coil Operating Range 400 320.0 160.0 23,500 ± 15% 6.5 Operate Data Must Operate Voltage: See Coil Data table. Operate Time /Release Time (typical): 17 ms / 18 ms. Bounce Time (typical): 4 ms. Switching Rate: 9,600 ops./hr. max. at rated load. Environmental Data Nom. coil voltage (Un) Temperature Range (Operating): DC Coil: -45°C to +60°C. AC Coil: -45°C to +40°C. Vibration: 30 to 150 Hz at 10g N/O, 5g N/C Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 805 specified. Refer to inside back cover. Applied coil voltage (U/Un) Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B RM C 0 5 024 1. Basic Series: RM = General purpose relay. 2. Contact Arrangement and Rating: C = 1 Form Z (SPDT-DB-DM) 30 Amp D = 1 Form X (SPST-NO-DM) 30 Amp 3. Test: 0 = without push-to-test-button. 3 = with push-to-test-button. 4. Enclosure: 5 = Bracket Mount Case 0.250 (6.35mm) quick connect. 5. Coil Voltage: Standard with with with LED Standard with with with LED Coil LED protection and Coil LED protection and (bipolar) diode* protection diode diode protection diode 006 L06 0A6 LA6 =6VDC 524 R24 — — =24VAC 012 L12 0B2 LB2 =12VDC 548 R48 — — =48VAC 024 L24 0C4 LC4 =24VDC 560 R60 — — =60VAC 048 L48 0E8 LE8 =48VDC 615 S15 — — =115VAC 060 L60 0G0 LG0 =60VDC 730 T30 — — =230VAC 110 M10 1B0 MB0 =110VDC 900 V00 — — =400VAC 220 N21 2C1 NC1 =220VDC * For models with protection diode, standard polarity is: terminal A1 is positive, terminal A2 is negative. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom Views) (1) 12 (3) 12 1.516 MAX. (38.50) .157 .059 (4.00) (4) 14 (6) 14 (4) 14 (6) 14 (1.50) (A) A1 (B) A2 (A) A1 (B) A2 2.520 (64.00) 2.303 1.909 MAX. RMC RMD (58.50) (48.50) 2.894 MAX. 1 Form Z 1 Form X (73.50) (SPDT-DB-DM) (SPST-NO-DM) .031 .248 (0.80) .059 (6.30) (1.50) 1.398 MAX. (35.50) .24 .468 (6.1) (11.9) 1.1 (27.9) .433 .433 (11.0) (11.0) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 806 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B S86R/S87R series Low Cost 20 Amp Industrial Relays File E22575 File LR15734 S86R S87R Mounting Mounting Style 1 Style 2 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features Nominal Coil Resistance (Ohms) Nominal • Low cost. Coil AC, ± 15% Coil Current (mA) • Contact forms to 2 Form C. Voltage DC, ± 10% @ 25°C* • Applications include spa controls, vending machines, HVAC, and machine tool controls. S86R & • Variety of mounting styles. S87R (AC) All Models All Models 12VAC 8.0 330 24VAC 32 165 120VAC 800 33.0 240VAC 3,200 16.5 Single Double Single Double S87R (DC) Pole Pole Pole Pole Models Models Models Models 6VDC 12.5 8 480 750 12VDC 50 32 240 375 24VDC 200 128 120 188 Contact Data @ 25°C 36VDC 450 288 80 125 48VDC 800 512 60 94 S86R and S87R: 20 amps @ 277VAC; 60 LRA, 12 FLA, 1 HP @ 72VDC 1,800 1,150 40 63 125VAC; 125VDC 5,425 3,470 23 36 48 LRA, 8 FLA @ 240VAC; 2 HP @ 250VAC; Pilot Duty, *Increase AC current values by 25% for mounting style 2 with single switch. 360VA @ 125/250VAC. Materials: Silver and silver-cadmium oxide. Expected Life: 1 million operations, mechanical; 50,000 operations at rated loads. Initial Dielectric Strength Operate Data Initial Breakdown Voltage: 1,560V rms, 60 Hz. Must Operate Voltage: DC Coils: 75% of nominal voltage @ +25°C. AC Coils: 85% of nominal voltage @ +25°C. Operating Position: Relay is designed for operation with plunger either vertical or horizontal; however, the relay is not designed for operation in an upside-down position. Coil Data @ 25°C Nominal Power: S86R: 4.0VA for AC models. S87R: 2.9 Watts for single pole DC models. 4.5 Watts for double pole DC models. 4.0VA for AC models. Insulation: Class B (130°C). Environmental Data Temperature Range: -10°C to +65°C. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 807 specified. Refer to inside back cover. 2.156 ± .010 (54.76 ± .25) Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B S86R 5 A 1 B 1 D 1 -120 1. Basic Series: S86R = Standard relay with AC coil, 20 Amp contacts. S87R = Standard relay with AC or DC coil, 20 Amp contacts. 2. Contact Arrangement: 5 = SPDT 7 = DPST-NO 11 = DPDT 3. Coil Input: A = AC (available on S86R and S87R) D = DC (available on S87R only) 4. Mounting Style: S86: S87: (See outline dimensions) 1 = Style 1 2 = Style 2 5. Coil Terminal Style: B = .250" (6.35mm) Quick-connect/solder. 6. Coil Terminal Location (S86): Coil Terminal Location (S87): 1 = Same side as switch terminals. 1 = Located perpendicular to switch terminals. 7. Switch Terminal Style: D = .250" (6.35mm) Quick-connect/solder. 8. Switch Terminal Configuration: 1 = Style 1 9. Coil Voltage: AC coils to 240VAC, 50/60 Hz. DC coils to 125VDC. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. S86R11D1B1D1-12 S87R5A2B1D1-240 S87R11A2B1D1-24 S87R11A2B1D1240 S86R5A1B1D1-120 S87R5A2B1D1-120 S86R11A1B1D1120 S87R5D2B1D1-24 S87R11A2B1D1120 S87R11D2B1D1-110 Outline Dimensions S86R (2 pole shown) Style 1 S87R (2 pole shown) Style 2 1.62 MAX. 1.92 MAX. 2.60 MAX. (41.1) MTG. HOLES (3) (48.77) (66.04) MTG. .07 DEEP 2.00 MAX. BOSS 1.568 REF. .156 ± .005 DIA. .158-.161 DIA. (50.80) (39.83) 2.42 MAX. (3.96 ± .13) (4.01-4.09) (61.5) .380 (9.65) .614 ± .03 1.480 ± .010 (15.60 ± .76) (37.59 ± .25) 2.42 MAX. .035 (61.47) (.89) 1.20 MAX. COIL TERMINAL .188 (30.5) .940 MAX. LOCATION #1 (4.78) (23.88) .280 ± .005 COIL TERMINAL (5.46 ± .13) 2.07 MAX. .375 ± .005 .166 DIA. LOCATION #2 (52.6) (9.53 ± .13) (4.22) (1) MTG. HOLE Switch Terminal Style Switch Terminal Configuration .250" (6.35mm) Quick Connect Style 1 WITH COIL COM. DEENERGIZED .250 N.C. .066 D. (6.35) (1.68) N.O. .312 (7.92) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 808 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B PM series Heavy Duty 25 Amp Multicontact AC or DC Power Relay File E22575 (PM) File E22575 (PMT) File 15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features DC Coils AC Coils (50/60 Hz.) DC Resis. DC Resis. • Contact ratings to 25 amps. Nominal In Ohms Nominal Nominal In Ohms Nominal • 8-32 screw or .250 Q.C. termination. Voltage ±10% Current In Voltage ±15% Current In • AC and DC coils available. @ +25°C Milliamps @ +25°C Milliamps • 4PDT contact arrangement. • Plastic and metal covers available. 6 8.2 732 12 33 364 12 1.4 1070 24 132 182 24 5.0 540 48 526 91 120 120 128 110 2760 40 240 587 61 . 125 3570 35 Contact Data @ 25°C Use a 110 volt relay with 2700 to 3300 ohm 5 watt Arrangements: 4 Form C (4PDT). 220 wire wound resistor in series. Ratings: PM & PMT: 25 amps @ 277VAC, max.; 10 amps @ 28VDC; 1 HP @ 120/240VAC, Single Phase. Operate Data @ 25°C Minimum Ratings: 1 amp @ 12 VAC/VDC. Material: Silver-cadmium oxide. Must-Operate Voltage: DC: 75% of nominal voltage @ +25°C. AC: 85% of nominal voltage @ +25°C. Expected Life: 10 million operations, mechanical; 100,000 operations at rated loads @ 25°C. Environmental Data . Temperature Range: AC: -55°C to +45°C @ nominal coil power. Initial Dielectric Strength DC: -55°C to +55°C @ nominal coil power (+75°C available on special order). Initial Breakdown Voltage: 2,000V rms minimum between all elements and ground. . Mechanical Data Mounting: Three holes; one front key-hole and two rear channel slots for . #8-32 screws. Coil Data @ 25°C Termination: PM: Heavy-duty screw type with #8-32 BH screw. Voltage: From 6 to 125VDC and 12 to 240VAC, 50/60 Hz. PMT: .250” (6.35mm) quick connect terminals. Insulating Material: Molded polyester alkyd. Nom. Power: DC: 4.4 Watts @ 25°C. AC: 14VA @ 25°C. Enclosure: PM & PMT: Plastic dust cover or metal enclosure available. Order separately. See following page. Duty Cycle: Continuous. Initial Insulation Resistance: 100 megohms, minimum. Weight: 14 oz. (397g) approximately. Ordering Information Typical Part No. B PM -17 A Y -120 1. Basic Series: PM 2. Type: Leave blank = Open relay with screw terminals. T = Open relay with .250” (6.35mm) quick connect terminals. 3. Contact Arrangement: 17 = 4 Form C (4PDT) 4. Coil Input: A = AC D = DC 5. Contact Material: Y = Silver-cadmium oxide. 6. Coil Voltage: To 240VAC or 125VDC (to 220V with resistor). Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. PM-17AY-24 PM-17DY-12 PMT-17DY-24 PM-17AY-120 PM-17DY-24 PM-17AY-240 PM-17DY-110 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 809 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions 2.657 MAX. (67.49) 2.719 MAX. (69.06) 2.500 .410 MAX. 1.000 (63.50) (10.41) (25.40) .078 3.394 MAX. (1.98) 2.000 (86.21) (50.80) Tolerance: ± .010 (± .25) PM Plastic Dust Cover 35D203 Overall Dimensions In Inches (mm) Part No. Length Width Height 35D203 3.394* 2.657* 2.719* (86.21) (67.49) (69.06) 35D227 5.313 3.813 3.813 (134.95) (96.85) (96.85) *When Mounted On Relay PM Metal Cover 35D227 3.81 MAX. 5.31 MAX. (96.8) (134.9) 3 MTG. HOLES .50 ± .031 4.125 .96 TYP. .215 DIA. .093 (12.7 ± .79) (104.77) (24.4) (5.46) (2.36) 3.81 MAX. 2.000 1.50 1.875 (96.8) (50.80) (38.1) (47.63) 1.00 (25.4) .75 (19.1) .937 (23.80) 1.12 2.500 3 HOLES (28.4) (63.50) TAPPED .87 DIA. 4 KNOCK-OUT HOLES #8-32 (22.1) 2 KNOCK-OUT HOLES EACH END Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com 810 reference purposes only. (millimeters) unless otherwise subject to change. Technical support: specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B PRD series 10 to 50 Amp Heavy Duty AC or DC Power Relay File E22575 (Models With All Screw Terminals) File E22575 (All Others) File 15734 File 1949 (Q. C. Terminal models only) Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Auxiliary Snap-Action Switch • Contact ratings to 50 amps. Arrangements: 1 Form C (SPDT). • Magnetic blowouts available for switching DC loads. Rating: 5 amps at 120VAC, 60 Hz. @ 25°C. • Arrangements to DPDT. Material: Silver. • SPDT auxiliary switch available. • Replaces PR series. Contact Data @ 25°C Initial Dielectric Strength Arrangements: Available to 2 Form C (DPDT). See ordering information. Ratings: See UL contact rating table. Initial Breakdown Voltage: 2,000V rms minimum between all elements Minimum Rating: 1A @ 12 VAC/VDC. and ground. (2,200V rms on 600V ratings.) Material: Silver and silver-cadmium oxide standard. Other materials available for special applications. Expected Life: 100,000 operations at rated loads @25°C. Life increases at reduced loads or with appropriate arc suppression. Coil Data @ 25°C UL/CSA Contact Ratings Voltage: From 6 to 220VDC, and 6 to 480VAC. Resistance: See coil data table. Type Supply Contact Ratings Nom. Power: DC coils: -2.0 watts @ 25°C. AC DC AC coils: - 9.8VA @ 25°C. PRD 1, 3 or 5 25 amps @ 277VAC Max Power: DC coils: - 8.0 watts @ 25°C. AY DY 1 HP at 120VAC Duty Cycle: Continuous. 2 HP at 250VAC Initial Insulation Resistance: 100 megohms, minimum. 10 amps at 600VAC 7 amps at 50VDC Res. Coil Data PRD 1, 3 or 5 30 amps at 277VAC Res. AG DG 1.5 HP at 120VAC “DY” and “DG” “AY” and “AG” 2HP at 250VAC DC Coils AC Coils (50-60Hz.) 10 amp at 600VAC Nominal Resistance Nominal DC Nominal DC Resis. Nominal AC PRD 7 or 11 25 amps at 240VAC Volts In Ohms Current In Volts In Ohms Current In AY DY 20 amps at 277VAC ±10%@ 25°C Milliamps ±15%@ 25°C Milliamps 1HP at 120VAC 6 18 333 6 .86 1600 2HP at 250VAC 12 71 169 12 3.2 820 7 amps at 50VDC Res. 24 288 84 24 12.0 410 10 amps at 600VAC 110 6050 18.2 120 290 85 PRD 7 or 11 30 amps at 240VAC 220 Use 110V relay with 240 1200 43 AG DG 20 amps at 277VAC approx. 6 ,000 ohm 480 4500 22 1.5 HP at 120VAC 5W wire-wound 2 HP at 250VAC resistor in series. 10 amps at 600VAC PRD 3,7 or 11 AH DH 20 amp at 125VDC AJ DJ 1/3 HP at 125VDC Operate Data @ +25°C Must-Operate Voltage: DC: 75% of nominal voltage @ 25°C. UL Recognized Load/Life Parameters for 50 Amp PRD AC: 85% of nominal voltage @ 25°C. Type Contact Ratings Minimum Life 50 Amps, 277VAC max., General Purpose 100,000 Cycles PRD3AP4 30 Amps, 277VAC max., Ballast 6,000 Cycles PRD3DP4 15 Amps, 277VAC max., Tungsten 6,000 Cycles Environmental Data 102 LRA, 17 FLA, 240VAC 30,000 Cycles 120 LRA, 20 FLA, 120VAC 30,000 Cycles Temperature Range: AC: -55°C to +45°C. 1.5 HP at 120VAC 30,000 Cycles DC: -55°C to +80°C. 3 HP at 240VAC 30,000 Cycles Note: Any PRD relay deviating electrically or physically from the standard models in the table is not UL or CSA listed. All horsepower ratings are for single phase motors. Mechanical Data DC Factory Contact Ratings Mounting: Two .187”(4.75mm) diameter holes on 1.875” (47.63mm) centers. Type Contact Ratings Termination: See ordering information tables for various options. PRD3AR4 60 Amps, 28VDC Res. Enclosure: Metal dust cover, 35D013, available. Order separately. PRD3DR4 30 Amps, 125VDC Res. Weight: 10 oz. (284g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 811 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B PRD -7 A Y 0 -120 1.Type: PRD = Open relay. PRDA = Open relay with aux. SPDT snap-action switch. 2.Main Contact Arrangement: 1 = SPST-NO 7 = DPST-NO 3 = SPST-NO-DM 7V = DPST-NO with 3mm contact gap 5 = SPDT 11=DPDT 3.Coil Input: A = 50/60 Hz. D = DC 4.Main Contact Material: Y = .312” (7.92mm) dia. silver. G = .312” (7.92mm) dia. silver cad.-oxide. †H = Silver w/magnetic blow out. †J = Silver cad.-oxide w/magnetic blow out. N = Tungsten stationary & silver cad.-oxide movable. Code 1, 5, 7 & 11 only. †Available with Code 3, 7& 11 contact arrangement only. 5.Termination: PRD PRDA (With Aux. SPDT Snap-Action Switch) CODE 0 1 3 A B L MAIN #8-32 Screw Term. .250” (6.35mm) QC #8-32 Screw Term. #8-32 Screw Term. .250” (6.35mm) QC Twin .250” (6.35mm) QC COIL 6-32 Screw Term. .250” (6.35mm) QC .250” (6.35mm) QC #6-32 Screw Term. .250” (6.35mm) QC .250” (6.35mm) QC AUX. SWITCH Screw Term. .250” (6.35mm) QC .250” (6.35mm) QC 6.Coil Voltage: 6, 12, 24, 110VDC 6, 12, 24, 120, 240, 480VAC, 50/60 Hz.Coil voltages are available to 125VDC and 600VAC. Stock Items – The following items are normally maintained in stock for immediate delivery. PRD-11AY0-120 PRD-11DJ0-24 PRD-3AG0-120 PRD-5AY0-240 PRD-7DG0-24 PRD-3AJ3-24 PRD-5DY0-12 PRD-7DY0-12 PRD-11AY0-240 PRD-11DY0-12 PRD-7DY0-24 PRD-11AY0-480 PRD-11DY0-24 PRD-3AY0-120 PRD-5DY0-24 PRD-3DY0-12 PRD-7AG0-120 PRD-11AG0-24 PRD-11DG0-12 PRD-11DY0-110 PRD-11AG0-120 PRD-11DG0-24 PRDA-11AGA-120 PRD-3DY0-24 PRD-7AY0-24 PRD-5AY0-24 PRD-7AY0-120 PRD-11AG0-240 PRD-11DH0-12 PRDA-11AYA-120 PRD-11AH0-120 PRD-11DH0-24 PRD-5AY0-120 PRD-7AY0-240 PRD-5AY1-120 PRD-7AY3-120 PRD-11AY0-24 PRD-11DH0-110 Ordering Information Typical Part No. B PRD -3 A P 4 -120 1. Type: PRD = Open power relay. 2. Main Contact Arrangement: 3 = 1 Form X (SPST-NO-DM) 3. Coil Input: A = AC, 50/60 Hz. D = DC 4. Main Contact Material: P = 50 amp, silver. R = 50 amp, silver with magnetic blow out. 5. Termination: 4 = Main — boxlug terminals which accept #6-#14 wire. Coil — #6-32 screw terminals. 6. Coil Voltage: 12, 24, 48, 110, 125VDC 24, 120, 240, 277, 480VAC, 50/60 Hz. Stock Items - The following items are normally maintained in stock for immediate delivery. No models in the PRD-3AP series are maintained in stock. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 812 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions PRD/PRDA Small Base - Top View PRD/PRDA Large Base - Top View 50 Amp PRD 2 MTG. HOLES DIA. .875 MAX. 2.5 MAX. 3.375 MAX. .187 + .005 .31 .875 MAX. (22.23) .31 .31 (63.3) (85.73) – .003 (7.9) 1.687 (22.23) (7.9) (7.9) 4.75 + .13 .81 (42.85) ( ) – .08 (20.6) 4 2 4 6 2 2 6 8 2.51 MAX. 6 2.51 MAX. (63.8) 1.875 (63.75) COIL 2.50 1.875 (47.63) COIL BOX LUG COIL (63.5)(47.63) 1.875 7 CONNECTOR (47.63) 5 3 1 5 3 1 5 1 DIMENSIONS APPLY TO 2 MTG. HOLES PRD 11 AND PRDA 11 DIA. .81 DIMENSIONS APPLY TO .187 + .005 (20.6) 2 MTG. HOLES PRD 1, 3, 5, & 7 – .003 DIA. .59 MAX. 2.5 MAX. .187 + .005 4.75 + .13 (15.0) (64) ( ) – .003 – .08 4.75 + .13 ( ) – .08 2.28 MAX. 2.50 MAX. (57.9) (63.5) 2.50 MAX.On PRD7 2.28 MAX. (63.5) (57.9) .375 3.00 (9.53) (76.2) 2.23 .375 4.250 MAX. (56.6) (9.53) (107.95) 3.375 3.375 MAX. .375 (85.73) W/O AUX SWITCH (85.73) (9.53) 2.5 MAX. W/O AUX SWITCH (63.5) 35D013 Dust Cover 5.31 MAX. (134.9) PRD dust cover has a 3.13 MAX. 4.125 (79.5) steel base with knockouts (104.77) .97 for 0.5” (12.7mm) dia. .50 2.06 .687 (24.64) (12.7) (52.3) .093 conduit and a cover fitted (17.45) (2.36) with two screws. Fits PRD relays, except with auxi- liary contacts. Finished in 1.50 1.875 1.625 3.38 MAX. gray baked enamel. (38.1) (47.63) (41.28) .75 (85.9) (19.1) Mounting: .812 .937 Three No. 10 holes on (20.62) (23.86) 2.56 1.875” (47.63mm) x (65.0) 4.125” (104.77mm) 5.125 .88 DIA. .218 DIA. 4 KNOCKOUT HOLES centers. (130.18) (22.4) (5.54) 4 HOLES 3 MTG. HOLES Dust Cover Open 2 KNOCKOUT HOLES EACH END TAPPED #8-32 PRD Magnetic Blow-Out Drawings PRD3 with Magnetic Blow-Out PRD7 with Magnetic Blow-Out PRD11 with Magnetic Blow-Out THIS SIDE OF MAGNET THIS SIDE OF MAGNET THIS SIDE OF MAGNET ATTRACTS NORTH SEEKING ATTRACTS NORTH SEEKING ATTRACTS NORTH SEEKING POLE OF COMPASS. POLE OF COMPASS. POLE OF COMPASS. - - + + - - POLARITY POLARITY POLARITY MARKING MARKING MARKING Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 813 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 9400 series Power Relay 1-pole, 8-12 FLA AC or DC Coil File E75492 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Temperature Rise Above Ambient • Single-pole relay used extensively in HVAC applications. 140 • Multi-positional mounting without affecting operation. • Convenient 0.250” (6.35 mm) quick connect terminals. 120 100 80 60 Contact Data @ 25°C Arrangements: 1 Form X (SPST-NO-DM), 1 Form Y (SPST-NC-DB), 40 1 Form Z (SPDT-DM-DB) & 1 Form Z (SPDT-DM-DB) jumpered to wire as 1 Form C (SPDT). 20 Materials: Silver Alloy and Fine Silver. Maximum Ratings: 0 80 100 120 130 Silver Alloy (Power) Contacts % Of Nominal Coil Voltage All Forms: 12 FLA, 60 LRA @ 125VAC; 18A @ 125VAC, resistive; 8 FLA, 48 LRA @ 240/277VAC; 18A @ 240/277VAC, resistive. 1 Form X only: 25A @ 240/277VAC, resistive. Fine Silver (Pilot) Contacts All Forms: 3A, 277VAC; Operate Data @ 25°C 125VA @ 125VAC; Must Operate Voltage: Approximately 85% of AC nominal coil voltage. 250VA @ 250VAC; Approximately 75% of DC nominal coil voltage. 277VA @ 277VAC; Expected Life: 1 million ops., mechanical. 250,000 ops., at rated resistive load. 100,000 ops., at rated inductive load. Environmental Data Temperature Range: Storage and Operating: -40°C – +65°C. Initial Dielectric Strength Initial Breakdown Voltage: 1,554 VAC between live parts and exposed non-current carrying metal parts. Mechanical Data Coil Data @ 25°C Voltage: 12 & 24 VDC; 6-277 VAC, 50/60 Hz. Termination: 0.250” (6.35 mm) quick connects, standard. Consult factory for availability of optional 0.187” (4.75 mm) quick connects. Max. Sealed Power: 4 VA (AC coils.); 3 W (DC coils). Nominal Inrush Power: 5 VA (AC coils.); 3 W (DC coils). Weight: 2.88 oz. (82 g) approximately Insulation Class: UL Class B (130°C). Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 814 specified. Refer to inside back cover. Coil Temperature Rise (C) Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 9400 -0 3 Q 1 999 1. Series: 9400 = 1- pole, 8-12 FLA relay 2.Mounting Bracket: 1 = Standard I Bracket with mounting holes on 2.625” (66.67mm) centers 4 = Standard T Bracket with mounting holes on 1.563” (39.70mm) centers 0 = Special I Bracket with mounting holes on 2.156” (54.76mm) centers 3. Pole Configuration: 1 = 1 Form X (SPST-NO-DM) 3 = 1 Form Z (SPDT-DM/DB) 2 = 1 Form Y (SPST-NC-DB) 4 = 1 Form Z (SPDT-DM/DB) jumpered to wire as 1 Form C. 4. Coil Voltage (50/60 Hz.): B = 12VDC Y = 6VAC P = 100VAC S = 200VAC V = 277VAC C = 24VDC Q = 24VAC T = 120VAC U = 208/240VAC QS = 24VAC, low VA 5. Contact Type: 1 = Silver alloy power contacts 2 = Fine silver pilot contacts 6. Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID Standard part numbers listed below are more likely to be available from stock. 9400-03Q1999 9400-03T1999 9400-03U1999 9400-04Q1999 9400-04T1999 9400-04U1999 Outline Dimensions 1.500 MAX. 1.842 (38.1) .190 DIA (46.79) (4.826) 9400 Standard 1.265 MAX. .625 1.265 Series I Bracket (32.13) (15.9) (32.13) (Code 1) 2.625 (66.68) 3.00 (76.2) 1.842 (46.79) .150 DIA .922 (3.81) (23.42) 1.842 .150 DIA (46.79) (3.81) Standard Special .500 1.813 1.563 1.265 1.265 T Bracket I Bracket (12.7) (46.05) (39.7) (32.13) (32.13) (Code 4) (Code 0) 2.156 (54.76) .375 (9.52) 2.67 (67.8) Contact Configurations Jumpered 1 Form X 1 Form Y 1 Form Z 1 Form X Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 815 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 9100 series Power Relay 1- and 2-pole, 3-12 FLA AC or DC Coil File E75492 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Temperature Rise Above Ambient • Single- or double-pole relay used extensively in HVAC applications. • Multi-positional mounting without affecting operation. 100 • Convenient 0.250” (6.35 mm) quick connect terminals. 90 80 70 Contact Data @ 25°C 60 Arrangements: 1 Form A (SPST-NO), 1 Form B (SPST-NC), 1 Form C 50 (SPDT), 2 Form A (DPST-NO), 2 Form B (DPST-NC), 2 Form C (DPDT) or 1 Form A + 1 Form B (SPST-NO+SPST-NC). 40 Materials: Silver, Fine Silver and Gold Alloy. 30 Maximum Ratings: 20 Silver (Power) Contacts All Forms: 3/4 HP @ 125/250VAC; 10 12 FLA, 60 LRA, 15A resistive @ 125VAC; 0 6 FLA, 35 LRA, 15A resistive @ 250/277VAC; 80 100 120 130 3 FLA, 18 LRA, 12.5A resistive @ 480VAC; % Of Nominal Coil Voltage 3 FLA, 14 LRA @ 600VAC; Form A only: 25A @ 277VAC, resistive. Fine Silver and Gold Alloy (Pilot) Contacts All Forms: 1/10 HP @ 125/250VAC; 3A @ 277VAC; 125VA @ 125VAC. Operate Data @ 25°C Expected Life: 1 million ops., mechanical. Must Operate Voltage: Approximately 85% of AC nominal coil voltage. 250,000 ops., at rated resistive loads. Approximately 75% of DC nominal coil voltage. 100,000 ops., at rated inductive loads. Environmental Data Temperature Range: Storage and Operating: -40°C – +65°C. Initial Dielectric Strength Initial Breakdown Voltage: 2,200 VAC @ 60 Hz. between live parts and exposed non-current carrying metal parts. Mechanical Data Coil Data @ 25°C Voltage: 12 & 24 VDC; 24-277 VAC, 50/60 Hz. Termination: 0.250” (6.35 mm) quick connects. Dual terminals on the coil are standard. Max. Sealed Power: 9.5 VA (AC coils.); 5.75 W (DC coils). Nominal Inrush Power: 21.5 VA (AC coils.); 5.75 W (DC coils). Weight: 6.08 oz. (173 g) approximately Insulation Class: UL Class B (130°C). Duty Cycle: Continuous. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 816 specified. Refer to inside back cover. Coil Temperature Rise (C) Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 9100 -2 3 3 Q 999 1. Series: 9100 = 1- or 2-pole, 3-12 FLA relay 2. Pole Configuration: 1 = Two-pole 3 = Single-pole (1,2,3 omitted) 4 = Single-pole (4,5,6 omitted) 3. Contact Configuration – Poles 4, 5, 6: 1 = 1 Form A (SPST-NO), Silver Contacts. 7 = 1 Form A (SPST-NO), Gold Alloy Contacts. 2 = 1 Form B (SPST-NC), Silver Contacts. 8 = 1 Form B (SPST-NC), Gold Alloy Contacts. 3 = 1 Form C (SPDT), Silver Contacts 9 = 1 Form C (SPDT), Gold Alloy Contacts 4 = 1 Form A (SPST-NO), Fine Silver Contacts. 0 = 4, 5, 6 Omitted 5 = 1 Form B (SPST-NC), Fine Silver Contacts. 6 = 1 Form C (SPDT), Fine Silver Contacts 4. Contact Configuration – Poles 1, 2, 3: 1 = 1 Form A (SPST-NO), Silver Contacts. 7 = 1 Form A (SPST-NO), Gold Alloy Contacts. 2 = 1 Form B (SPST-NC), Silver Contacts. 8 = 1 Form B (SPST-NC), Gold Alloy Contacts. 3 = 1 Form C (SPDT), Silver Contacts 9 = 1 Form C (SPDT), Gold Alloy Contacts 4 = 1 Form A (SPST-NO), Fine Silver Contacts. 5 = 1 Form B (SPST-NC), Fine Silver Contacts. 6 = 1 Form C (SPDT), Fine Silver Contacts 5. Coil Voltage (50/60 Hz.): B = 12VDC Q = 24VAC T = 120VAC U = 208/240VAC V = 277VAC C = 24VDC P = 100VAC S = 200VAC N = 240VAC QS = 24VAC, low VA 6. Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID Standard part numbers listed below are more likely to be available from stock. 9100-233Q999 9100-233T999 9100-233U999 Outline Dimensions 2.01 (51.05) .095 1.81 (2.41) (45.97) .15 (3.81) .22 (5.59) .550 .495 (13.97) (12.57) 1.830 (46.48) 2.365 (60.1) .710 2.110 .203 DIA (19.03) (53.6) .145 .195 (5.16) (3.68) (4.95) .16 1.64 (4.06) (41.66) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 817 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED 38 series Potential Motor Starting Relay 1-pole, 35A, Normally Closed AC Coil File E83865 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 25°C Voltage: 130, 170, 214, 256, 336, 395, 420 and 495 VAC, 60 Hz. • Single-pole, normally closed relay used extensively in HVAC applications. Nominal Sealed Power: 5 VA). • Variety of mounting positions and brackets. Insulation Class: UL Class B (130°C). • Convenient 0.250” (6.35 mm) quick connect terminals. • Custom-built to meet customer requirements. Duty Cycle: Continuous. Contact Data @ 25°C Arrangements: Normally-Closed. Materials: Silver cadmium oxide. Mechanical Data Maximum Rating: 35A inductive @ 277VAC, 0.5 power factor (Break only.) Termination: 0.250” (6.35 mm) quick connects (single or dual, model Expected Life: 750,000 ops, mechanical. dependent). Terminals #4 & #6 are dummies for customer 250,000 ops., breaking rated load. convenience. Mounting Position: Each model is calibrated for its specified mounting Initial Dielectric Strength position. Pick-up voltage may vary if relay is mounted in positions other than specified. Initial Breakdown Voltage: 1,554 VAC @ 60 Hz. between live parts and Weight: 5.76 oz. (163.8 g) approximately exposed non-current carrying metal parts. Ordering Information Typical Part No. B 38 -A 144 C 3 000 1. Series: 38 = 1-pole, normally-closed, potential motor starting relay 2. Wiring and Terminal Type (number of QCs at given base locations): A = 2 @ loc. 1, 2 @ loc. 2, 4 @ loc. 3, 2 @ loc. 5 and 2 @ loc. 6. D = 2 @ loc. 1, 2 @ loc. 2, 4 @ loc. 3, 2 @ loc. 5 and 0 @ loc. 6. M = 2 @ loc. 1, 2 @ loc. 2, 2 @ loc. 3, 2 @ loc. 5 and 0 @ loc. 6. R = 1 @ loc. 1, 2 @ loc. 2, 0 @ loc. 3, 1 @ loc. 5 and 0 @ loc. 6. S = 1 @ loc. 1, 2 @ loc. 2, 0 @ loc. 3, 2 @ loc. 5 and 0 @ loc. 6. T = 2 @ loc. 1, 2 @ loc. 2, 0 @ loc. 3, 2 @ loc. 5 and 0 @ loc. 6. Y = 1 @ loc. 1, 2 @ loc. 2, 4 @ loc. 3, 2 @ loc. 5 and 0 @ loc. 6. 3. Coil Rating and Calibration: 000-999 = See table on following page for details. 4. Mounting Bracket Style: C, D, F or J = See drawings below for details. #8-32 1.59 UNC-2B THD. (40.39) C D F J .500 (12.7) #8-32 1.00 1.563 UNC-2B THD. (25.4) (39.7) 5. Mounting Position: 1, 2, 3, 4, 5 & 6 = See drawings below for details. NOTE: Devices calibrated in specified mounting position only. 1 2 3 4 5 6 6. Customer ID Suffix: 000-999 = Factory assigned customer ID Standard part numbers listed below are more likely to be available from stock. Custom parts only. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 818 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Coil Rating & Calibration Table Select proper continuous coil voltage from top of appropriate column, select pick - up (PU) and drop-out (DO) voltages and insert relay calibration (RC) number in part number. COIL #1 COIL #2 COIL #3 COIL #4 Outline Dimensions 130 V 60 Hz 170 V 60 Hz 256 V 60 Hz 336 V 60 Hz 117 V 50 Hz* 151 V 50 Hz* 228 V 50 Hz* 299 V 50 Hz* RES.@ 1480+10% RES.@ 2040+10% RES.@ 5100+10% RES.@ 6800+10% 24°C 24°C 24°C 24°C RC# PU DO RC# PU DO RC# PU DO RC# PU DO 1 2 159-172 20-77 3 240-269 45-95 4 243-271 55-125 8 9 10 259-288 45-95 11 261-290 55-125 1.59 15 16 17 278-306 45-115 18 280-309 55-125 (40.4) 22 23 24 296-325 45-115 25 299-327 55-125 29 30 31 315-343 45-115 32 317-345 55-125 36 37 38 323-352 45-115 39 326-354 55-125 43 44 45 333-363 45-115 46 335-364 55-125 50 51 52 285-305 MAX. 77 53 340-370 55-125 .156 57 111-125 20-50 58 111-124 30-65 59 240-269 35-77 60 171-184 40-90 .250 (3.96) 64 121-134 20-50 65 120-134 30-65 66 123-134 25-77 67 168-182 MAX. 90 (6.35) 71 130-143 20-55 72 130-144 30-65 73 74 180-195 40-90 78 139-153 20-55 79 140-153 30-65 80 136-150 45-90 81 219-253 40-115 85 149-163 20-55 86 149-163 30-65 87 150-163 45-90 88 152-166 55-115 92 93 159-172 30-65 94 159-172 45-90 95 162-175 55-115 99 100 168-182 30-65 101 168-182 45-95 102 171-184 55-115 106 107 178-192 30-75 108 178-192 45-95 109 180-193 55-115 1.82 2.065 113 114 139-153 MAX. 55 115 185-213 45-95 116 188-214 55-115 (46.2) (52.45) 120 121 122 203-231 45-95 123 205-234 55-115 127 128 129 221-250 45-95 130 224-252 55-125 134 135 136 140-152 33-77 137 186-215 40-90 141 80-110 20-55 142 143 285-305 45-115 144 162-175 40-90 148 62-76 20-45 149 150 159-172 35-77 151 162-175 70-100 156 157 158 150-162 MAX. 77 159 243-271 40-90 163 164 165 136-150 MAX. 50 166 205-234 40-90 170 171 172 166-182 35-77 173 180-195 MAX.105 178 179 180 181 224-252 40-90 185 186 187 188 280-309 55-100 194 205-234 40-90 198 152-166 40-90 1.82 (46.2) COIL #5 COIL #6 COIL #7 COIL #8 395 V 60 Hz 420 V 60 Hz 495 V 60 Hz 214 V 60 Hz 338 V 50 Hz* 378 V 50 Hz* 452 V 50 Hz* 193 V 50 Hz* RES.@ 9600+10% RES.@ 12700+10% RES.@ 15200+10% RES.@ 2840+10% 2.03 24°C 24°C 24°C 24°C (51.6) RC# PU DO RC# PU DO RC# PU DO RC# PU DO 5 245-275 60-140 6 242-272 75-150 7 239-268 75-170 193 158-171 25-57 12 262-290 60-140 13 262-290 75-150 14 258-287 75-170 196 120-134 25-56 19 280-310 60-140 20 280-310 75-160 21 277-305 75-170 197 129-142 25-57 26 305-335 60-140 27 300-328 75-160 28 295-324 75-170 33 187-208 60-130 34 318-347 75-160 35 314-342 75-180 40 326-354 60-140 41 328-356 75-150 42 323-352 75-180 47 335-365 60-140 48 337-366 75-160 49 332-361 75-180 54 340-370 60-140 55 340-370 75-160 56 258-287 60-135 61 180-195 40-105 62 300-328 75-121 63 68 215-225 MAX.120 69 300-328 MAX.125 70 323-352 MAX.135 75 334-363 50-110 76 212-232 MAX.121 77 277-305 75-150 82 298-326 50-110 83 195-224 60-121 84 295-324 60-135 89 189-205 60-130 90 204-233 60-121 91 325-345 MAX.135 96 162-175 50-100 97 260-290 60-121 98 103 180-195 50-100 104 242-272 60-121 105 110 180-195 60-130 111 180-195 60-121 112 239-268 60-135 117 190-215 60-130 118 190-215 60-121 119 325-345 75-170 124 208-239 60-130 125 204-233 75-150 126 277-305 60-135 131 223-254 60-140 132 223-252 75-150 133 138 245-275 MAX.120 139 195-224 75-150 140 145 208-239 MAX.120 146 320-340 60-121 147 152 260-275 MAX.120 153 295-315 MAX.195 154 160 260-275 60-140 161 218-243 60-121 162 167 215-225 60-130 168 205-234 40-90 169 174 239-270 50-110 175 223-252 60-121 176 182 208-239 50-110 183 295-315 MAX.125 184 189 224-252 60-121 190 280-310 60-121 191 195 190-215 40-105 192 180-195 40-105 200 279-308 50-110 *For 50 Hz, add 300 to RC# - i.e. for 151 V 50 Hz, RC# 58 changes to 358. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 819 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B P25 series Definite Purpose Magnetic Contactor 25 Ampere Full Load 30 Ampere Resistive AC & DC Coils File E22575 File LR15734 TUV Rheinland .. No. R 97069 P25 with DC coil P25 with AC coil Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features • AC and DC coils. Nominal Resistance Must Maximum Nominal Coil • For controlling motors, power supplies, heating elements and lighting. VDC (Ohms ± 10% Operate* Operating Current (ma) @ • Dust cover available. @ 25°C) Volts Volts Nominal Voltage • Auxiliary switch available. 12 34 9 15 353 24 133 18 30 180 AC Voltage Nominal Must Operate Contact Data @ 25°C Rating 60 Hz. 50 Hz. 60 Hz. 50 Hz. Arrangements: Up to 3 Form X (3PST-NO-DM). 24 24 24 20.4 20.4 Ratings: See contact rating table. 120 120 110 102 94 Material: Silver-cadmium oxide. 240 208/240 208/220 177 177 Expected Life: 500,000 operations at full load. AC coil: 2 million operations, mechanical. DC coil: 5 million operations, mechanical. Consult factory for other voltages. Minimum Contact Load: 3A @ 120VAC. *Must operate is 75% of nominal voltage for any mounting position, applicable for vertical or horizontal mounting, but not for upside-down mounting. **Units requiring less power can be provided for some applications. Consult factory for details. Note: Coil suppression is recommended for all DC coil units, particularly 120 and 240VDC coils. Main Contact Ratings @ +25°C, 60 Hz. Motor Rating in Amps, 3Ş3P or 1Ş2P Resistive Rating Type Full Load Locked Rotor (Electric Heat) @ 600V @ 240V @ 480V @ 600V @ 600V P25 25A 150A 125A 100A 30A Operate Data @ 25°C Motor Rating in Horsepower Must-Operate Voltage: See coil data tables. Type @ 120V @ 240V @ 440-600V 1Ş2P 1.5HP 3HP — 3Ş3P 3HP 7.5HP 10HP Notes: Models utilizing box lug terminals are restricted to the following ratings: 25 FLA, 150 LRA @ 250VAC; 30A @ 277VAC Resistive; Horsepower ratings shown in the table are valid up to 240VAC. Tungsten Lamp Rating: 30A, 277VAC. Environmental Data Electric Discharge Lamp Rating: 30A, 277VAC. Temperature Range: AC: —55°C to +65°C Heavy Duty Pilot Ratings @ 120V through 600V: 720VA max. (Box lug nut units limited to 277VAC.) DC: —55°C to +55°C Contact sales representative for higher Auxiliary Snap-Action Switch Arrangements: Up to 2 Form C (DPDT). temperature ratings. Rating: 10 amps at 120VAC, 60 Hz. @ 25°C. Material: Silver. Initial Dielectric Strength Initial Breakdown Voltage: 2,200V rms. minimum between all elements Mechanical Data and between all elements and ground. Mounting: No. 10 screws on 2.125” (53.98mm) centers or universal mounting bracket. Termination: Contacts: 8-32 screw for No. 16 to No. 8 wire, dual .250” (6.35mm) Coil Data @ 25°C quick connect, box lug or captive pressure plate. Coil: Combination 8-32 screw and .250” (6.35mm) or .187” (4.75mm) Voltage: From 6 to 240VDC and 24 to 600VAC, 50/60 Hz. quick connect, combination captive pressure plate and .250” Power: DC, 4-8W; AC, 40VA inrush; 10VA, sealed. (6.35mm) quick connect, or .250” (6.35mm) quick connect. Duty Cycle: Continuous. Aux. Switch: .250” (6.35mm) quick connect, .187” (4.75mm) quick Insulation Class: Class A, standard. Class B available. connect. Initial Insulation Resistance: 100 megohms, minimum. Weight: 14 oz. (397g). Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 820 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B P25 P 42 A 1 4 P 1 -240 1. Type: P25 Definite Purpose Contactor 2. Auxiliary Switch: P = No Aux Switch C = 1 Form C (SPDT), silver contacts F = 2 Form C (DPDT), silver contacts Double pole contact forms require two switches. 3. Main Contact Arrangement: 42 = 3 Form X (3PST-NO-DM) 43 = 2 Form X (DPST-NO-DM) & 1 Form Y (SPST-NC-DB) Other contact arrangements are available. 4. Coil Control Input: A = Alternating Current, 50/60 Hz. D = Direct Current 5. Mounting and Installed Accessories: 1 = Without Mounting Plate* 2 = With Mounting Plate * Order separately any mounting hardware which is to be bulk packed. 6. Main Contact Terminals: 2 = 8-32 Screw Terminals 3 = Dual .250” (6.35mm) Quick Connect 5 = 8-32 Screw with Captive Pressure Plate 7. Auxiliary Contact Terminals: P = No Auxiliary Switch D = .250” (6.35mm) Quick Connect 8. Coil Terminals: 1 = Combination 8-32 Screw Terminal and .250” (6.35mm) Quick Connect 6-32 Screw Terminal available on DC Coils only. 9. Coil Voltage: 24, 120 or 240VAC 12 or 24VDC See Coil Data table. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. P25P42A12P1-120 P25P42A12P1-240 P25P42A22P1-120 P25P42A22P1-240 P25P42D22P1-12 P25P42D22P1-24 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 821 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions P25 With AC Coil P25 With DC Coil Mounting Plate Footprint 2.50 4.050 MAX. 4.050 MAX. .218 ± .01 (63.5) (102.87) (102.87) (5.54 ± .25) 1.875 W/DOUBLE SWITCH W/DOUBLE SWITCH .218 ± .01 2.00 (47.63) (5.54 ± .25) (50.8) .062 .250 (1.00) (1.57) (6.35) (25.4) .21 1.625 3.250 (5.3) (41.28) (82.55) 3.75 .5 DIA. (95.3) (12.7) 3.125 (79.38) 1.062 .142 #10-32 TYP. (26.97) 3.400 MAX. 3.400 MAX. (3.61) 2 PLACES (86.36) (86.36) 2.125 W/SINGLE SWITCH W/SINGLE SWITCH (53.98) 2.750 MAX. 2.750 MAX. (69.85) (69.85) W/O SWITCHES W/O SWITCHES .69 ± .015 .69 ± .015 (17.5 ± .38) (17.5 ± .38) 1.61 MAX. .90 ± .015 (40.9) (22.9 ± .38) .88 ± .015 (22.4 ± .38) Contact Terminal Options Code 2 Code 3 Code 4 Code 5 #8-32 UNF-2A X .500” (12.7mm) #8-32 UNF-2A X .375” (9.525mm) Duak .250” (6.35mm) Screw With Captive Binder Terminal Screw 15S334 Box Lug Connector 26A866 Quick Connect 26A902 Pressure Plate 15S354 Replacement Parts and Accessories Contact Replacement Kit - 9P25X1 Contact replacement kit includes 3 contact pressure springs, 3 movable contact assemblies and 6 stationary contact assemblies. Contact replacement kits are for use only on those models with form X contact arrangements. Mounting Plate Kit - 9P25X2 Mounting plate kit includes one mounting plate (37B918) and two mounting screws (15J011). Auxiliary Switch Kit for P25 AC Coil Units - 9P25X3 This auxiliary switch kit includes one plastic actuator and one auxiliary switch assembly. It contains no screw. One assembly screw must be removed from the P25 contactor and used to mount the auxiliary switch. Auxiliary Switch Kit for P25 DC Coil Units - 9P25X4 This auxiliary switch kit includes one plastic actuator, one auxiliary switch assembly and one thread cutting screw. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 822 specified. Refer to inside back cover. 2.90 MAX. (73.7) W/SINGLE SWITCH 3.0 MAX. 2.50 MAX. (76.2) (63.5) W/O CONTACT DUST COVER 2.05 MAX. (52.1) 2.125 ± .01 (53.98 ± .25) 3.35 MAX. 3.25 MAX. (85.1) (82.6) W/DOUBLE SWITCH W/CONTACT DUST COVER 3.575 MAX. 3.35 MAX. (90.81) (85.1) W/CONTACT DUST COVER W/DOUBLE SWITCH 2.125 ± .01 (53.98 ± .25) 2.05 MAX. (52.1) 3.325 MAX. 2.50 MAX. (84.48) (63.5) W/O CONTACT DUST COVER 2.90 MAX. (73.7) W/SINGLE SWITCH Catalog 1308242 Issued 3-03 P&B P30/P40 series Definite Purpose Magnetic Contactor 30/40 Ampere Full Load 40/50 Ampere Resistive AC & DC Coils File E22575 P30 No. R 97070 .. TUV Rheinland File LR15734 P40 No. R 97071 Users should thoroughly review the technical data before selecting a product part DC Coil AC Coil number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features Nominal Resistance Must Maximum Nominal Coil • AC and DC coils. VDC (Ohms ± 10% Operate* Operating Current (ma) @ • Available with auxiliary switch. @ 25° C) Volts Volts Nominal Voltage • Variety of main contact terminals. 12 20.8 9 15 577 • For control of motors, power supplies, heating elements and lighting. 24 84 18 30 286 48 334 36 57 144 120 2,110 90 144 57 Contact Data @ 25°C Arrangements: Up to 4 Form X (4PST-NO-DM) Ratings: See contact rating table. Material: Silver-cadmium oxide. Expected Life: 200,000 operations at full load. AC Voltage Nominal Must Operate* AC coil: 2 million operations, mechanical. Rating 50/60 Hz. 50/60 Hz. DC coil: 10 million operations, mechanical. 24 24 20.4 Minimum Contact Data: 3A @ 120VAC. 120 110/120 94 240 208/240 177 277 277 236 Main Contact Ratings Motor Rating in Amps, 3Ş3P or 1Ş2P Resistive Tungsten *Applicable for vertical mounting, but not for upside-down mounting. Type Full Load Locked Rotor Rating Rating Note: Coil suppression is recommended for all DC coil units, particulary 120 and @ 600V @ 240V @480V @ 600V @ 600V @277V 240VDC coils. P30 30A 180A 150A 120A 40A 40A P40 40A 240A 200A 160A 50A 50A Operate Data P30 Electrical Discharge Lamp Control: 40A @ 240V (Delta), 40A @ 600V (Wye). P40 Electrical Discharge Lamp Control: 50A @ 600V (Wye). Must-Operate Voltage: See coil data tables. Motor Rating in Horsepower Type @ 120V @ 240V @ 440-600V P30 1Ş2P 1.5HP 3HP — 3Ş3P 3HP 7.5HP 7.5HP P40 1Ş2P 2HP 5HP — Environmental Data 3Ş3P 5HP 10HP 15HP Temperature Range: –55°C to +65°C. Auxiliary Snap-Action Switch Arrangements: Up to 2 Form C (DPDT). Rating: 10 amps at 120-250VAC @ 25°C. Material: Silver. Mechanical Data Mounting: Universal mounting bracket. See outline drawings. Initial Dielectric Strength Termination: Initial Breakdown Voltage: 2,200V rms minimum between all elements Contacts: Binder screw, box lug, captive pressure plate, combination and between all elements to ground. screw and dual .250” (6.35mm) quick connect, or combination box lug and dual .250” (6.35mm) quick connect. See Main Contact Terminal Options photo. Coil Data @ 25°C Coil: Combination 8-32 screw and .250” (6.35mm) quick connect. Aux. Switch: .250” (6.35mm) quick connect, .187” (4.75mm) quick Voltage: From 12 to 120VDC, and 24 to 277VAC, 50/60 Hz. connect. Power: DC, 7.5 W; AC, 92VA, In rush; 12 VA Sealed. Weight: 3 Pole Models: 25 oz. (709g) approximately. Duty Cycle: Continuous. 4 Pole Models: 28 oz. (794g) approximately. Insulation Class: Class A, standard, Class B available. Initial Insulation Resistance: 100 megohms, minimum. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 823 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B P30 P 42 A 1 4 P 1 -240 1. Type: P30 = Definite Purpose Contactor, 30 amp. P40 = Definite Purpose Contactor, 40 amp. 2. Auxiliary Switch: P = No Aux. Switch C = 1 Form C (SPDT) F = 2 Form C (DPDT) 3. Main Contact Arrangement: 42 = 3 Form X (3PST-NO-DM) 47 = 4 Form X (4PST-NO-DM) 43 = 2 Form X (DPST-NO-DM) 48 = 2 Form X (DPST-NO-DM) & 1 Form Y (SPST-NC-DB) & 2 Form Y (DPST-NC-DB) 45 = 1 Form X (SPST-NO-DB) 49 = 4 Form Y (4PST-NC-DB) & 2 Form Y (DPST-NC-DB) Other contact arrangements are available. 4. Coil Control Input: A = Alternating Current, 50/60 Hz. D = Direct Current 5. Mounting and Installed Accessories: 1 = Standard Mounting 6. Main Contact Terminals: 2 = Screw Terminals 5 = Captive Pressure Plate 3 = Screw Terminals & Dual .250” (6.35mm) Quick Connect 6 = Box Lug & Dual .250” (6.35mm) Quick Connect 4 = Box Lug 7. Auxiliary Contact Terminals: P = No Auxiliary Switch C = .187” (4.75mm) Quick Connect D = .250” (6.35mm) Quick Connect 8. Coil Terminals: 1 = Combination 8-32* Screw Terminal and .250” (6.35mm) Quick Connect 9. Coil Voltage: 24, 120, 240 or 277VAC 12, 24 or 120VDC Our authorized distritburos are more likely to maintain the following items in stock for immediate delivery. P30P42A12P1-120 P40C42A12D1-120 P30P42D12P1-24 P40P42A12P1-24 P30P47A12P1-120 P40P42A12P1-120 P30P47D12P1-24 P40P42A12P1-240 P40P42D12P1-24 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 824 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions 3 Pole Models AC Coil DC Coil 3.25 MAX. (82.55) 2.550 W/SWITCH (64.77) 2.650 MAX. .21 TYP. 3.420 MAX. 3.975 MAX. (67.31) .25 TYP. (5.3) (86.87) (100.97) W/O SWITCH (6.4) 3.250 ± .010 (82.55 ± .25) 3.800 MAX. 3.550 MAX. 3.550 MAX. 3.125 ± .010 .5 DIA. (96.52) (90.17) (90.17) (79.38 ± .25) (12.7) 1.500 ± .020 (38.10 ± .51) 2.00 (50.8) 4 Pole Models AC Coil DC Coil 3.600 MAX. (91.44) W/SWITCH 2.550 .21 TYP. 3.350 MAX. (64.77) 3.975 MAX. 3.420 MAX. (5.3) (85.09) .25 TYP. (100.97) (86.87) W/O SWITCH (8.4) 3.250 ± .010 3.550 MAX. (82.55 ± .25) (90.17) 3.125 ± .010 3.550 MAX. .5 DIA. (79.38 ± .25) (90.17) (12.7) 3.800 MAX. (96.52) 1.500 ± .020 (38.10 ± .51) 2.00 (50.8) Contact Terminal Options Code 2 Code 4 Code 5 Code 3 Code 6 #10-32 UNF-2A X .500” (12.7mm) Screw with Captive #10-32 UNF-2A X .375” (9.525mm) Dual .250” (6.35mm) Pressure Plate 15S362 Binder Terminal Screw 15S365 Box Lug (Keyed) 24C540 with Quick Connect 26A945 Dual .250” (6.35mm) Accepts the following wire sizes: accepts the following 15S361 & 15S364 Screws #10-32 UNF-2A X .375” (9.525mm) Quick Connect 26A945 Solid, Single —22-8 AWG Accepts the following wire sizes: wire size: Solid, Single — 8 AWG Binder Terminal Screw 15S365 Box Lug 9P30X3 Solid, Double —22-14 AWG Solid, Single —14-4 AWG accepts the following Accepts the following wire sizes: Stranded, Single —22-8 AWG wire size: Solid, Single — 8 AWG Solid, Single —14-4 AWG Stranded, Double —22-16 AWG Main Contact Ordering and Replacement Information Contact Replacement Kits Contact replacement kits for 3 pole models include 3 contact pressure springs, 3 movable contact assemblies and 6 stationary contact assemblies. Kits for 4 pole models include 4 contact pressure springs, 4 movable contact assemblies and 8 stationary contact assemblies. Contact replacement kits are for use only on those models with form X contact arrangements. Kits for P30 contactors: To Replace Contacts: 3 Form X models - Kit No. 9P30X1 1. Remove screws holding dust cover in place, and remove cover. 4 Form X models - Kit No. 9P30X2 2. Compress and remove contact pressure springs. 3. Lift movable contacts and remove. Kits for P40 contactors: 4. Remove screws holding stationary contact in place, and remove contacts. 3 Form X models - Kit No. 9P40X1 5. Reverse the above procedure to install new stationary and movable contacts. 4 Form X models - Kit No. 9P40X2 Caution: Do not overtighten the screws, as it is possible to strip the threads. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 825 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B P31/P41 series Definite Purpose Magnetic Contactor 16 to 40 Amp Full Load 20 to 50 Amp Resistive File E25575 P31 No. R 9071107 .. TUV Rheinland P31 P41 File LR15734 P41 No. R 9071106 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 25°C • 3 phase and single phase switching. Voltage: 12 and 24V DC. See Coil Data table. • Integral dual QC terminals. Power: 8W. • Class “B” coil insulation. Duty Cycle: Continuous. • Variety of main terminals. Insulation: Class B. • Applications include HVAC industrial control. Initial Insulation Resistance: 100 megohms minimum. • Direct activated DC coils. Coil Data @ +25°C DC Nominal Must Nominal Resistance Coil Code Operate Voltage in Ohms Current Contact Data @ 25°C Voltage ±10% (mA) Main Contacts: DFO 12DC 21 9 571 Arrangements: 3 Form X (3PST-NO-DM) and 4 Form X (4PST-NO-DM). DHO 24DC 84 18 286 Ratings: See Main Contact Ratings Table. Material: Silver-cadmium oxide. *Applicable for vertical or horizontal mounting, but not for upside-down mounting. Initial Breakdown Voltage: 2,200V rms minimum between all elements Note: Coil suppression is recommended for all units. and between all elements to ground. Expected Life: 200,000 operations at motor load. 500,000 operations, mechanical. Operate Data @ 25°C Minimum Contact Data: 3A @ 120VAC. Must-Operate Voltage: See Coil Data Table. Initial Dielectric Strength Environmental Data Initial Breakdown Voltage: 2,200V rms minimum between all elements and between all elements and ground. Temperature Range: –55°C to +65°C. Mechanical Data Main Contact Ratings @ 25°C, 60 Hz. AC (Per Pole) Mounting: Universal mounting bracket. See Outline Drawings. @ 240VAC @ 480VAC @ 600VAC Termination: LRA FLA LRA FLA LRA FLA RES Contacts: Dual .250” (6.35mm) quick connect with or without binder head screw or box lug. P31C 150 25 125 25 100 25 35 P31E 240 40 200 40 160 40 50 Coil: Dual .250” (6.35mm) quick connect. P41B 120 20 100 20 80 20 25 Weight: 18 oz. (510g) approximately. P41C 150 25 125 25 100 25 35 Ordering Information Typical Part No. B P41 C 47 D HO 1 03 1. Type: P31 = 3 Pole P41 = 4 Pole 2. Contact Rating C = 25 Amp E = 40 Amp (40A rating only offered on P31) 3. Contact Arrangement: 42 = 3 Form X (3PST-NO-DM) 47 = 4 Form X (4PST-NO-DM) P41 only 4. Coil Input: D = Direct Current (Direct Operated) 5. Coil Voltage: FO = 12VDC, with coil cover HO = 24VDC, with coil cover 6. Coil Terminal Location And Marking (See Terminal Location and Marking Diagram): 1 = Dual .250” (6.35mm) quick connect 7. Contact Terminals (See Contact Terminal Options Diagram): 03 = Dual .250” (6.35mm) quick connect turned up per Figure 03 (25 amps, Max.) 05 = #10-32 binder head screw with dual .250” (6.35mm) quick connect per Figure 05 08 = Aluminum box lug (for #4-#14 copper wire) with dual .250” (6.35mm) quick connect per Figure 08 Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 826 specified. Refer to inside back cover. L1 L2 L3 L1 L2 L3 L4 T1 T2 T3 T4 T1 T2 T3 Catalog 1308242 Issued 3-03 P&B Outline Dimensions P31 Top View 2.870 MAX. 2.415 MAX. (72.90) (61.34) 1.000 ± .010 .105 ± .005 R. .062 ± .005 (25.40 ± .25) (2.67 ± .13) (1.57 ± .13) 10 PLACES .250 ± .005 (6.35 ± .13) COIL TERMINALS 2.725 MAX. LOAD LINE (69.22) SIDE SIDE .210 ± .010 (5.33 ± .25) .210 ± .010 (5.33 ± .25) 1.500 ± .010 (38.10 ± .25) 2.000 ± .010 (50.80 ± .25) 2.550 MAX. (64.77) P41 Top View 2.630 MAX. 2.730 MAX. (66.80) (69.34) 1.000 ± .010 .250 ± .005 (25.40 ± .25) (6.35 ± .13) .105 ± .005 R. (2.67 ± .13) COIL 10 PLACES TERMINALS 2.725 MAX. LOAD LINE (69.22) SIDE SIDE .210 ± .010 (5.33 ± .25) .210 ± .010 (5.33 ± .25) 1.500 ± .010 (38.10 ± .25) 2.000 ± .010 (50.80 ± .25) 2.550 MAX. (64.77) Contact Terminal Options Figure 02 Figure 03 Figure 05 .250” (6.35mm) #10-32 UNF-2B Quick Connect Tapped Hole #10-32 UNF-2A X .375” (9.525mm) Turned Up Binder Head Screw Figure 06 Figure 07 Figure 08 #10-32 UNF-2A X .500” (12.7mm) #10-32 UNF-2A X .375” (9.525mm) Box Lug Connector Screw With Captive Screw With #12 Binder Head Pressure Plate Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 827 specified. Refer to inside back cover. 3.800 MAX. 3.800 MAX. (96.52) (96.52) 3.250 ± .010 3.250 ± .010 (82.55 ± .25) (82.55 ± .25) 3.125 ± .010 3.125 ± .010 (79.38 ± .25) (79.38 ± .25) Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED PRELIMINARY DATA Model 2000 series Definite Purpose Contactor 1- or 2-pole, 25-30 FLA AC Coil File E75492 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 25°C Voltage: 24, 100, 120, 200, 208-240 and 277 VAC, 50/60 Hz. • Next-generation contactor is smaller and lighter than previous models. • Enclosed case affords contact and coil protection while working in Nominal Power: 6 VA (60 Hz.); 8 VA (50 Hz.). conjunction with plastic mounting base to reduce operational noise level Nominal Inrush Power: 25 VA (60 Hz.); 30 VA (50 Hz.). and electrically isolate unit. Coil Temperature Rise: 65°C Max. • Snap-together assembly and reduced part count help to hold down cost. Insulation Class: UL Class B (130°C). • Design permits direct access to holes in mounting base. Duty Cycle: Continuous. Contact Data @ 25°C Operate Data @ 25°C Must Operate Voltage: 85% of nominal coil voltage or less. Arrangements: 1 Form X (SPST-NO-DM) with or without shunt and Must Release Voltage: 10% of nominal coil voltage or more. 2 Form X (DPST-NO-DM). Initial Operate Time: 20 ms, typical. Maximum Ratings: See Contact Ratings Table. Initial Release Time: 10 ms, typical. Minimum Ratings: 96VA. Max. Bounce Time: 0-10 ms, typical. Material: Silver Cadmium Oxide. Expected Life (application dependent): 200,000 ops., at rated load. 500,000 ops., mechanical. Contact Ratings Maximum Full Locked Resistive Model Environmental Data Voltage Load Rotor Load Temperature Range: Storage and Operating: -40°C – +65°C. VAC Amps Amps Amps Flammability: UL 94-HB housing. 25 Amp Contactor 277 25 150 30 30 Amp Contactor 277 30 150 40 Initial Dielectric Strength Mechanical Data Contact Termination: Initial Breakdown Voltage: Type: #10-32 Screw with quad 0.250” (6.35 mm) quick connects. Between Contacts and Coil: 1,600 VAC Wire Size: 16-8 AWG (Must use ring terminal for 8 AWG wire.) Between Poles: 1,600 VAC Tightening Torque: 22 in.-lbs. Between Open Contacts: 1,600 VAC Coil Termination: Dual 0.250” (6.35 mm) quick connects. Weight: 4.93 oz. (140 g) approximately Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 828 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 2000 - 20 Q 6 999 1. Series: 2000 = 1- or 2-pole, 25-30FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3. Pole Configuration: 10 = 1 Form X (SPST-NO-DM) 15 = 1 Form X (SPST-NO-DM) with Shunt 20 = 2 Form X (DPST-NO-DM) 4. Coil Voltage (50/60 Hz.): Q = 24VAC T = 120VAC U = 208/240VAC P = 100VAC S = 200VAC V = 277VAC 5. Contact Ratings (Inductive): 1 = 25 FLA on 1-pole models 5 = 25 FLA on 2-pole models 2 = 30 FLA on 1-pole models 6 = 30 FLA on 2-pole models 6. Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. 2000-15Q1999 2000-20Q5999 2000-15T1999 2000-20T5999 2000-15U1999 2000-20U5999 2000-15Q2999 2000-20Q6999 2000-15T2999 2000-20T6999 2000-15U2999 2000-20U6999 Outline Dimensions 2.125 2.125 (53.975) (53.975) 1.625 3.000 1.625 3.000 (41.275) (76.2) (41.275) (76.2) 0.215 DIA 0.215 DIA (5.461) (5.461) 4 PLACES 4 PLACES 1.625 1.625 (41.275) (41.275) Model 2000-10 (one pole) Model 2000-20 (two pole) Model 2000-15 (one pole with shunt) 2.125 2.125 (53.975) (53.975) Termination Options STANDARD SPECIAL #10-32 Combination #10-32 Sems Screw Philliips, Slotted & with Pressure Plate 5/16 Hex Head #12 Washer ORDERING NOTE: “Standard” terminals need not be specified in the “Ordering Information” chart above. “Special” terminals are offered on a special order basis. Special order items may be subject to extended leadtimes and significant minimum order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information regarding items with these options. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 829 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Model 96 - 3100 series Definite Purpose Contactor 1- or 2-pole, 20-40 FLA AC Coil File E75492 File EN60947-4-1:1991 IEC 947-4-1 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data Temperature Range: Storage and Operating: -40°C – +65°C. • Robust 1- and 2-pole contactors. • Shunt available on 1-pole models. Flammability: UL 94-HB housing. • Convenient mounting plate. Mechanical Data Contact Termination: Contact Data @ 25°C 20, 25, 30 FLA Models Arrangements: 1 Form X (SPST-NO-DM) with or without shunt and Type: #10-32 Screw with quad 0.250” (6.35 mm) quick connects. 2 Form X (DPST-NO-DM). Wire Size: 16-8 AWG (Stranding must be split for 8 AWG wire.) Maximum Ratings: See Contact Ratings Table. Tightening Torque: 25 in.-lbs. Material: Silver Cadmium Oxide. 40 FLA Models Type: Box Lug with dual 0.250” (6.35 mm) quick connects. Wire Size: 14-4 Cu/Al AWG Tightening Torque: 40 in.-lbs. Coil Termination: Dual 0.250” (6.35 mm) quick connects. Coil Data @ 25°C Arc Cover: Optional on 20-30 FLA models, standard on 40 FLA models. Voltage: 24 - 277 VAC, 50/60 Hz. See Coil Data Table below. Weight: One Pole Types: 8 oz. (227 g) approximately. Insulation Class: UL Class B (130°C). Two Pole Types: 9.6 oz. (273 g) approximately Duty Cycle: Continuous. Contact Ratings Full Number Line Locked Resistive Maximum Horsepower Load of Voltage Rotor Amps Voltage Single Amps Poles Amps Rating Phase 240/277 120 30 120 2 20 2 480 100 30 240 3 600 80 30 240/277 150 30 120 1 25 1 480 50 30 240 2 600 40 30 240/277 150 35 120 2 25 2 480 125 35 240 3 600 100 35 240/277 150 40 120 1 30 1 480 75 40 240 2 600 50 40 240/277 150 40 120 2 30 2 480 125 40 240 3 600 100 40 240/277 240 50 120 2 40 1 480 200 50 240 3 600 160 50 240/277 240 50 120 2 40 2 480 200 50 240 3 600 160 50 Coil Data 1-Pole Models 2-Pole Models Nominal Coil Voltage 24 120 208/240 277 24 120 208/240 277 Maximum Pickup Volts 18 88 177 221 18 88 177 221 Drop-Out Volts Range 6 - 15 20 - 70 40 - 140 50 - 165 6 - 15 20 - 70 40 - 140 50 - 165 Nominal Inrush VA @ 50 Hz 22.5 22.5 22.5 22.5 37 37 37 37 Nominal Inrush VA @ 60 Hz 20 20 20 20 35 35 35 35 Nominal Sealed VA @ 50 Hz 77778888 Nominal Sealed VA @ 60 Hz 5.25 5.25 5.25 5.25 7777 Nominal DC Resistance - Ohms 16.5 420 1850 2650 11 250 1000 1600 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 830 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 3100 - 20 Q 6 999 1. Series: 3100 = 1- or 2-pole, 20-40 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 10 = 1 Form X (SPST-NO-DM) 15 = 1 Form X (SPST-NO-DM) with Shunt 20 = 2 Form X (DPST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC T = 120VAC U = 208/240VAC P = 100VAC S = 200VAC V = 277VAC 5.Contact Ratings (Inductive): 1 = 25 FLA on 1-pole models 3 = 20 FLA on 2-pole models 2 = 30 FLA on 1-pole models 5 = 26 FLA on 2-pole models 14 = 35 FLA on 1-pole models 6 = 30 FLA on 2-pole models 19 - 40 FLA on 1-pole models 18 = 40 FLA on 2-pole models 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. 3100-15Q2999 3100-20Q6999 3100-20Q18999CL 3100-15T2999 3100-20T6999 3100-20T18999CL 3100-15U2999 3100-20U6999 3100-20U18999CL Outline Dimensions Termination Options 2.10 Max. 1-Pole (53.3) .253 (6.43) 1.625 3.30 2.313 .875 (41.28) (83.8) (57.75) (22.2) Standard Special Standard on 20, 25, 30, 35 FLA on 20, 25, 30, 35 FLA on 40 FLA #10-32 Combination #10-32 Sems Screw Lug accepts 14-4 Phillips, Slotted & with Pressure Plate Cu/Al AWG .215 TYP (5.46) 1.625 (41.3) 5/16 Hex Head 2.00 (50.8) #12 Washer 2.445 (62.1) 2.541 (64.5) 2.10 Max. 2-Pole (53.3) 1.625 .875 3.30 2.313 (41.28) (22.2) (83.8) (57.75) .215 TYP (5.46) 1.625 (41.3) 2.00 (50.8) 2.445 (62.1) 2.610 (66.3) ORDERING NOTE: “Standard” terminals need not be specified in the “Ordering Information” chart above. “Special” terminals are offered on a special order basis. Special order items may be subject to extended leadtimes and significant minimum order quantities. Your Tyco Electronics sales engineer must consult with the factory before providing price and availability information regarding items with these options. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 831 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Model 98 - 3100 series Definite Purpose Contactor 3-pole, 20-40 FLA AC Coil File E75492 File EN60947-4-1:1991 IEC 947-4-1 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data Temperature Range: Storage and Operating: -40°C – +65°C. • 3-pole contactors. • Industry-standard mounting plate. Flammability: UL 94-HB housing. • Optional interlock/auxiliary switches available. • Manual test button is standard. • Coil dust cover helps keep dust and dirt away from magnet and coil area. • Double E magnet system provides optimal performance. Mechanical Data Contact Termination: 20, 25, 30 FLA Models Contact Data @ 25°C Type: #10-32 Screw with quad 0.250” (6.35 mm) quick connects. Wire Size: 16-8 AWG (Stranding must be split for 8 AWG wire.) Arrangements: 3 Form X (3PST-NO-DM). Tightening Torque: 25 in.-lbs. Maximum Ratings: See Contact Ratings Table. 40 FLA Models Material: Silver Cadmium Oxide. Type: Box Lug with dual 0.250” (6.35 mm) quick connects. Wire Size: 14-4 Cu/Al AWG Tightening Torque: 40 in.-lbs. Coil Termination: Dual 0.250” (6.35 mm) quick connects, standard. Coil Data @ 25°C A 0.250” quick connect and a #6-32 screw, optional. Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Arc Cover: Optional on 20-30 FLA models, standard on 40 FLA models. Insulation Class: UL Class B (130°C). Weight: 16 oz. (455 g) approximately Duty Cycle: Continuous. Contact Ratings Full Number Line Locked Resistive Maximum Horsepower Load of Voltage Rotor Amps Voltage Single Three Amps Poles Amps Rating Phase Phase 240/277 120 30 110/120 1.5 - 20 3 480 100 30 200/240 3 7.5 600 80 30 480/600 - 7.5 110/120 2 - 240/277 150 35 200/208 - 7.5 25 3 480 125 35 240/277 5 10 600 100 35 480 - 15 600 - 20 110/120 2 - 240/277 180 40 200/208 - 10 30 3 480 150 40 240/277 5 10 600 120 40 480 - 15 600 - 20 110/120 3 - 240/277 240 50 200/208 - 10 40 3 480 200 50 240/277 7.5 10 600 160 50 480 - 20 600 - 25 Coil Data Nominal Coil Voltage 24 120 208/240 277 480 Maximum Pickup Volts 18 88 177 220 384 Drop-Out Volts Range 6 -15 20 - 70 40 - 140 65 - 185 150 - 270 Nominal Inrush VA @ 50 Hz 60 60 60 60 65 Nominal Inrush VA @ 60 Hz 53 53 53 53 53 Nominal Sealed VA @ 50 Hz 6.0 6.0 6.0 6.0 6.0 Nominal Sealed VA @ 60 Hz 5 5 5 5 5 Nominal DC Resistance - Ohms 7 180 720 950 3100 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 832 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 3100 - 30 Q 9 999 1. Series: 3100 = 3-pole, 20-40 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 30 = 3 Form X (3PST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC U = 208/240VAC H = 480VAC J = 120VAC, molded M = 277VAC, molded T = 120VAC V = 277VAC I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded 5.Contact Ratings (Inductive): 7 = 20 FLA 8 = 25 FLA 9 = 30 FLA 10 = 40 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. 3100-30Q9999CY 3100-30U9999CY 3100-30T10999CG 3100-30T9999CY 3100-30Q10999CG 3100-30U10999CG Outline Dimensions Termination Options 2.97 2.00 (75.44) .250 TYP. (50.8) 1.78 1.19 3.00 (6.35) (45.21) (30.23) (76.2) .253 (6.43) 3.25 .203 TYP. (82.55) (5.156) Standard on Special on Standard 20, 25, 30, 35 FLA 20, 25, 30, 35 FLA on 40 FLA .455 DIA. 2.39 #10-32 Combination #10-32 Sems Lug accepts 14-4 (11.56) (86.1) 3.75 Phillips, Slotted & Screw Cu/Al AWG (95.25) 5/16 Hex Head with Pressure #12 Washer Plate ORDERING NOTE: “Standard” terminals need not be specified in the “Ordering Information” chart above. “Special” terminals are offered on a special order basis. Special order items may be 2.0 MAX. .203 TYP. .125 subject to extended leadtimes and significant minimum order (50.8) (5.156) (3.175) quantities. Your Tyco Electronics sales engineer must consult 2.375 TYP. Shown with Optional Auxiliary Switches with the factory before providing price and availability (60.325) information regarding items with these options. Auxiliary Switches Various interlock / auxiliary switches are available for the Model 98 contactor. Equipped with 0.250” (6.35) Quick Connect Terminals All auxiliary switches for the Model 98 are snap-on design, no tools required. Factory Modifications Field Added Kits Description Contact Config. Kit Catalog Number of NO NC Number Kits Required Single unit interlock 1 0 98220-303 1 configurations listed. 0 1 98220-331 1 Maximum of two. 1 1 98220-332 1 (One on each side.) 2 0 98220-303 2 0 2 98220-331 2 See footnote (1) for ratings. 2 2 98220-332 2 SPDT Circuit 1 1 98220-337 1 (Either one or two 2 2 98220-338 1 switches per side.) 2 2 98220-337 2 See footnote (2) for ratings. 4 4 98220-338 2 ONE SPDT TWO SPDT 1 N/O / 1 N/C SPDT Dry Circuit 1 1 98220-341 1 SWITCH SWITCHES 0.1 amp max. 2 2 98220-340 1 PER SIDE PER SIDE Gold Flashed Contacts 4 4 98220-340 2 Equipped with #6-32 Screw Terminals & Saddle Clamps Factory Modifications Field Added Kits Footnotes: Ratings of Auxiliary Interlocks / Switches Description Contact Config. Kit Catalog Number of (1) Contact Rating Single Circuit NO or NC and two circuit NO/NC: NO NC Number Kits Required 120V 240V 480V 600V Single unit interlock 1 0 98220-303 1 Amperes - Break 3.0 1.5 0.75 0.6 configurations listed. 0 1 98220-331 1 Amperes - Make 30 15 7.5 6 Maximum of two. 1 1 98220-332 1 Amperes - Continuous 10 10 10 10 (One on each side.) 2 0 98220-303 2 0 2 98220-331 2 (2) Contact Rating SPDT (337): See footnote (1) for ratings. 2 2 98220-332 2 10A, 1/3 HP, 125 or 250 VAC 1/2A, 125 VDC; 1/4A, 250 VDC: 4A 120 VAC on Lamp Load Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 833 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Model 93 - 3100 series Definite Purpose Contactor 3-pole, 50-60 FLA AC Coil File E75492 File EN60947-4-1:1991 IEC 947-4-1 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data Temperature Range: Storage and Operating: -40°C – +65°C. • 3-pole contactors. • Convenient “universal” mounting plate. Flammability: UL 94-HB housing. • Optional interlock/auxiliary switches available. Mechanical Data Contact Termination: Type: Box Lug with dual 0.250” (6.35 mm) quick connects. Contact Data @ 25°C Wire Size: 14-2 Cu/Al AWG Tightening Torque: 50 in.-lbs. Arrangements: 3 Form X (3PST-NO-DM). Coil Termination: Dual 0.250” (6.35 mm) quick connects, standard. Maximum Ratings: See Contact Ratings Table. A 0.250” quick connect and a #6-32 screw, optional. Material: Silver Cadmium Oxide. Arc Cover: Standard. Weight: 32 oz. (910 g) approximately Coil Data @ 25°C Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Insulation Class: UL Class B (130°C). Duty Cycle: Continuous. Contact Ratings Full Number Line Locked Resistive Maximum Horsepower Load of Voltage Rotor Amps Voltage Single Three Amps Poles Amps Rating Phase Phase 110/120 3 - 50 3 240 300 65 200/208 7.5 15 480 250 65 240/277 10 15 600 200 65 480 - 25 600 - 25 110/120 5 - 60 3 240 360 75 200/208 7.5 25 480 300 75 240/277 10 25 600 240 75 480 - 30 600 - 30 Coil Data Nominal Coil Voltage 24 120 208/240 277 480 Maximum Pickup Volts 182 93 177 235 374 Drop-Out Volts Range 6 -15 20 - 70 40 - 135 50-180 120 - 286 Nominal Inrush VA @ 50 Hz 140 140 140 140 140 Nominal Inrush VA @ 60 Hz 132 132 132 132 132 Nominal Sealed VA @ 50 Hz 20 20 20 20 20 Nominal Sealed VA @ 60 Hz 14 14 14 14 14 Nominal DC Resistance - Ohms 2.4 45 180 280 852 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 834 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 3100 - 30 Q 16 999 1. Series: 3100 = 3-pole, 50-60 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 30 = 3 Form X (3PST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC U = 208/240VAC H = 480VAC J = 120VAC, molded M = 277VAC, molded T = 120VAC V = 277VAC I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded 5.Contact Ratings (Inductive): 16 = 50 FLA 17 = 60 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. None at present. Outline Dimensions Termination 3.563 3.10 .218 TYP. (90.5) (78.7) (5.537) .438 2.75 (11.12) 2.032 .250 (69.9) (51.61) (6.35) .253 (6.43) Standard 3.25 on 50-60 FLA (82.55) Lug accepts 14-2 3.75 Cu/Al AWG 3.19 (95.25) (81.03) 1.468 .250 (37.29) 2.65 (6.35) 2.242 (67.3) (56.95) Shown with Optional Auxiliary Switch Auxiliary Switches Equipped with 0.250” (6.35) Quick Connect Terminals Various interlock / auxiliary switches are available for the Model 93 contactor. Factory Modifications Field Added Kits Description Contact Config. Kit Catalog Number of NO NC Number Kits Required Single unit interlock 1 0 34300-303 1 configurations listed. 0 1 34300-331 1 Maximum of two. Must 1 1 34300-332 1 be same polarity. 2 0 34300-303 2 NORMALLY OPEN NORMALLY CLOSED See footnote (1) for ratings. 0 2 34300-331 2 -303 STYLE -331 STYLE 2 2 34300-332 2 SPDT Circuit 1 1 34300-337 1 See footnote (2) for ratings. 2 2 34300-337 2 SPDT Dry Circuit, 0.1 amp max. 1 1 34300-341 1 Gold Flashed Contacts 2 2 34300-340 1 Equipped with #6-32 Screw Terminals & Saddle Clamps Factory Modifications Field Added Kits NORMALLY OPEN & CLOSED SPDT Description Contact Config. Kit Catalog Number of -332 STYLE -337 & -341 STYLE NO NC Number Kits Required Single unit interlock 1 0 34300-342 1 configurations listed. 0 1 34300-343 1 Maximum of two. Must 1 1 34300-344 1 be same polarity. (note 1) Footnotes: Ratings of Auxiliary Interlocks / Switches (1) Contact Rating Single Circuit NO or NC (2) Contact Rating SPDT (337): and two circuit NO/NC: 10A, 1/3 HP, 125 or 250 VAC W/ #6-32 SCREW & SADDLE CLAMP 120V 240V 480V 600V 1/2A, 125 VDC; 1/4A, 250 VDC: -344 STYLE Break 3.0A 1.5A 0.75A 0.6A 4A 120 VAC on Lamp Load Make 30A 15A 7.5A 6A Continuous 10A 10A 10A 10A Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 835 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Model 93 - 3100 series Definite Purpose Contactor 4-pole, 25-40 FLA AC Coil File E75492 File EN60947-4-1:1991 IEC 947-4-1 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data Temperature Range: Storage and Operating: -40°C – +65°C. • 4-pole contactors. • Convenient “universal” mounting plate. Flammability: UL 94-HB housing. • Optional interlock/auxiliary switches available. Mechanical Data Contact Termination: 25, 30 FLA Models Contact Data @ 25°C Type: #10-32 Screw with quad 0.250” (6.35 mm) quick connects. Wire Size: 16-8 AWG (Stranding must be split for 8 AWG wire.) Arrangements: 4 Form X (4PST-NO-DM). Tightening Torque: 25 in.-lbs. Maximum Ratings: See Contact Ratings Table. 40 FLA Models Material: Silver Cadmium Oxide. Type: Box Lug with dual 0.250” (6.35 mm) quick connects. Wire Size: 14-4 Cu/Al AWG Tightening Torque: 40 in.-lbs. Coil Termination: Dual 0.250” (6.35 mm) quick connects, standard. Coil Data @ 25°C A 0.250” quick connect and a #6-32 screw, optional. Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Arc Cover: Optional on 25-30 FLA models, standard on 40 FLA models. Insulation Class: UL Class B (130°C). Weight: 24 oz. (683 g) approximately Duty Cycle: Continuous. Contact Ratings Full Number Line Locked Resistive Maximum Horsepower Load of Voltage Rotor Amps Voltage Single Three Amps Poles Amps Rating Phase Phase 240/277 150 35 110/120 2 - 25 3 480 125 35 200/208 - 7.5 600 100 35 240/277 5 10 480 - 15 240/277 180 40 110/120 2 - 30 3 480 150 40 200/208 - 10 600 120 40 240/277 5 10 480 - 15 240/277 240 50 110/120 3 - 40 3 480 200 50 200/208 - 10 600 160 50 240/277 7.5 10 480 - 20 Coil Data Nominal Coil Voltage 24 120 208/240 277 480 Maximum Pickup Volts 19.2 93 177 220 384 Drop-Out Volts Range 6 -15 20 - 70 40 - 140 50-185 150 - 270 Nominal Inrush VA @ 50 Hz 68 68 68 58 48 Nominal Inrush VA @ 60 Hz 60 60 60 52 52 Nominal Sealed VA @ 50 Hz 14 14 14 11 11 Nominal Sealed VA @ 60 Hz 9 9 9.5 9.5 9 Nominal DC Resistance - Ohms 5 148 520 750 2700 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 836 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 3100 - 40 Q 9 999 1. Series: 3100 = 4-pole, 25-40 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 40 = 4 Form X (4PST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC U = 208/240VAC H = 480VAC J = 120VAC, molded M = 277VAC, molded T = 120VAC V = 277VAC I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded 5.Contact Ratings (Inductive): 8 = 25 FLA 9 = 30 FLA 10 = 40 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. None at present. Outline Dimensions Termination Options 2.00 3.055 (50.8) .250 .250 (77.6) (6.35) (6.35) .253 (6.43) Standard on Special on Standard 3.25 (82.55) 25, 30 FLA 25, 30 FLA on 40 FLA 3.125 3.75 #10-32 Combination #10-32 Sems Lug accepts 14-4 (79.38) (95.25) Phillips, Slotted & Screw Cu/Al AWG 5/16 Hex Head with Pressure #12 Washer Plate ORDERING NOTE: “Standard” terminals need not be specified in the “Ordering Information” chart above. “Special” terminals are offered on a special order basis. Special order items may be 2.493 subject to extended leadtimes and significant minimum order .203 TYP (63.3) .203 TYP quantities. Your Tyco Electronics sales engineer must consult (5.156) (5.156) 2.633 with the factory before providing price and availability (66.9) information regarding items with these options. Shown with Optional Auxiliary Switch Auxiliary Switches Equipped with 0.250” (6.35) Quick Connect Terminals Various interlock / auxiliary switches are available for the Model 93 contactor. Factory Modifications Field Added Kits Description Contact Config. Kit Catalog Number of NO NC Number Kits Required Single unit interlock 1 0 34220-303N 1 configurations listed. 0 1 34220-331N 1 Maximum of two. Must 1 1 34220-332N 1 be same polarity. 2 0 34220-303N 2 NORMALLY OPEN NORMALLY CLOSED See footnote (1) for ratings. 0 2 34220-331N 2 -303 STYLE -331 STYLE 2 2 34220-332N 2 SPDT Circuit 1 1 34220-337N 1 See footnote (2) for ratings. 2 2 34220-337N 2 SPDT Dry Circuit, 0.1 amp max. 1 1 34220-341N 1 Gold Flashed Contacts 2 2 34220-340N 1 Equipped with #6-32 Screw Terminals & Saddle Clamps Factory Modifications Field Added Kits NORMALLY OPEN & CLOSED SPDT Description Contact Config. Kit Catalog Number of -332 STYLE -337 & -341 STYLE NO NC Number Kits Required Single unit interlock 1 0 34220-342N 1 configurations listed. 0 1 34220-343N 1 Maximum of two. Must 1 1 34220-344N 1 be same polarity. (note 1) Footnotes: Ratings of Auxiliary Interlocks / Switches (1) Contact Rating Single Circuit NO or NC (2) Contact Rating SPDT (337): and two circuit NO/NC: 10A, 1/3 HP, 125 or 250 VAC W/ #6-32 SCREW & SADDLE CLAMP 120V 240V 480V 600V 1/2A, 125 VDC; 1/4A, 250 VDC: -344 STYLE Break 3.0A 1.5A 0.75A 0.6A 4A 120 VAC on Lamp Load Make 30A 15A 7.5A 6A Continuous 10A 10A 10A 10A Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 837 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Model 96 - 3186 series Definite Purpose Contactor 3-pole, 75-90 FLA AC Coil File E75492 File EN60947-4-1:1991 IEC 947-4-1 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data Temperature Range: Storage and Operating: -40°C – +65°C. • 3-pole contactors. • Convenient “universal” mounting plate. Flammability: UL 94-HB housing. • Optional interlock/auxiliary switches available. Mechanical Data Contact Termination: Type: Box Lug with dual 0.250” (6.35 mm) quick connects. Contact Data @ 25°C Wire Size: 14-1/0 Cu/Al AWG Tightening Torque: 50 in.-lbs. Arrangements: 3 Form X (3PST-NO-DM). Coil Termination: 0.250” quick connect and a #6-32 screw. Maximum Ratings: See Contact Ratings Table. Arc Cover: Standard. Material: Silver Cadmium Oxide. Weight: 64 oz. (1820 g) approximately Coil Data @ 25°C Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Insulation Class: UL Class B (130°C). Duty Cycle: Continuous. Contact Ratings Full Number Line Locked Resistive Maximum Horsepower Load of Voltage Rotor Amps Voltage Single Three Amps Poles Amps Rating Phase Phase 110/120 5 - 75 3 240 450 93 200/208 10 20 480 375 93 240/277 15 25 600 399 93 480 - 40 600 - 25 110/120 7.5 - 90 3 240 540 120 200/208 15 25 480 450 120 240/277 20 30 600 360 120 480 - 50 600 - 50 Coil Data Nominal Coil Voltage 24 120 208/240 277 480 Maximum Pickup Volts 18 88 177 220 384 Drop-Out Volts Range 6 -15 20 - 70 40 - 110 65-185 150 - 270 Nominal Inrush VA @ 50 Hz 285 285 285 285 285 Nominal Inrush VA @ 60 Hz 240 240 240 240 240 Nominal Sealed VA @ 50 Hz 42 42 42 42 42 Nominal Sealed VA @ 60 Hz 27 27 27 27 27 Nominal DC Resistance - Ohms .63 15.6 63.5 84 255 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 838 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 3186 - 30 Q 90 999 1. Series: 3186 = 3-pole, 75-90 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 30 = 3 Form X (3PST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC U = 208/240VAC H = 480VAC J = 120VAC, molded M = 277VAC, molded T = 120VAC V = 277VAC I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded 5.Contact Ratings (Inductive): 75 = 75 FLA 90 = 90 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standar Standard par d part numbers list t numbers listed belo ed below ar w are mor e more lik e likely t ely to be a o be av vailable fr ailable from st om stoc ock. k. None at present. Outline Dimensions Termination 2.875 4.062 4.187 (73.02) (103.2) (106.3) 2.50 (63.5) 3.75 (95.25) .406 (10.31) Standard 3.75 (95.25) on 75-90 FLA 5.00 Lug accepts 14-1/0 (127.01) Cu/Al AWG 4.625 (117.5) .203 (5.16) 2.25 (57.15) .188 2.50 (63.5) (4.78) 2.875 (73.02) Shown with Optional Auxiliary Switch Auxiliary Switches Equipped with 0.250” (6.35) Quick Connect Terminals Various interlock / auxiliary switches are available for the Model 96 contactor. Factory Modifications Field Added Kits Description Contact Config. Kit Catalog Number of NO NC Number Kits Required Single unit interlock 1 0 34300-303 1 configurations listed. 0 1 34300-331 1 Maximum of two. Must 1 1 34300-332 1 NORMALLY OPEN NORMALLY CLOSED be same polarity. 2 0 34300-303 2 -303 STYLE -331 STYLE See footnote (1) for ratings. 0 2 34300-331 2 2 2 34300-332 2 SPDT Circuit 1 1 34300-337 1 See footnote (2) for ratings. 2 2 34300-337 2 SPDT Dry Circuit, 0.1 amp max. 1 1 34300-341 1 Gold Flashed Contacts 2 2 34300-340 1 Equipped with #6-32 Screw Terminals & Saddle Clamps Factory Modifications Field Added Kits NORMALLY OPEN & CLOSED SPDT Description Contact Config. Kit Catalog Number of -332 STYLE -337 & -341 STYLE NO NC Number Kits Required Single unit interlock 1 0 34300-342 1 configurations listed. 0 1 34300-343 1 Maximum of two. Must 1 1 34300-344 1 be same polarity. (note 1) Footnotes: Ratings of Auxiliary Interlocks / Switches (1) Contact Rating Single Circuit NO or NC (2) Contact Rating SPDT (337): and two circuit NO/NC: 10A, 1/3 HP, 125 or 250 VAC W/ #6-32 SCREW & SADDLE CLAMP 120V 240V 480V 600V 1/2A, 125 VDC; 1/4A, 250 VDC: -344 STYLE Break 3.0A 1.5A 0.75A 0.6A 4A 120 VAC on Lamp Load Make 30A 15A 7.5A 6A Continuous 10A 10A 10A 10A Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 839 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Model A - 3100 series Definite Purpose Contactor 3-pole, 120 FLA AC Coil File E75492 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data Temperature Range: Storage and Operating: -40°C – +65°C. • 3-pole contactors. • Convenient “universal” mounting plate. Flammability: UL 94-HB housing. • Optional interlock/auxiliary switches available. Mechanical Data Contact Termination: Type: Box Lug with dual 0.250” (6.35 mm) quick connects. Contact Data @ 25°C Wire Size: 2 – 4-0 Cu/Al AWG Tightening Torque: 100 in.-lbs. Arrangements: 3 Form X (3PST-NO-DM). Coil Termination: 0.250” quick connect and a #6-32 screw. Maximum Ratings: See Contact Ratings Table. Arc Cover: Standard. Material: Silver Cadmium Oxide. Weight: 128 oz. (3640 g) approximately Coil Data @ 25°C Voltage: 24 - 480 VAC, 50/60 Hz. See Coil Data Table below. Insulation Class: UL Class B (130°C). Duty Cycle: Continuous. Contact Ratings Full Number Line Locked Resistive Maximum Horsepower Load of Voltage Rotor Amps Voltage Single Three Amps Poles Amps Rating Phase Phase 110/120 10 - 120 3 240 720 150 200/208 20 30 480 600 150 240 25 40 600 480 150 480 - 75 600 - 75 Coil Data Nominal Coil Voltage 24 120 208/240 277 480 Maximum Pickup Volts 20.4 93 176 235 374 Drop-Out Volts Range 6 -15.6 20 - 70 40 - 135 65-180 150 - 270 Nominal Inrush VA @ 50 Hz 470 600 600 600 – Nominal Inrush VA @ 60 Hz 400 510 510 510 510 Nominal Sealed VA @ 50 Hz 43 50 50 50 – Nominal Sealed VA @ 60 Hz 40 48 48 40 48 Nominal DC Resistance - Ohms .264 4.73 18.6 30.25 78 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 840 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Ordering Information Typical Part No. B 3100 - 30 Q 120 999 1. Series: 3100 = 3-pole, 120 FLA contactor 2.Packaging: Y = Individual Pack - = Bulk Pack A-ZZZ = Customer specific information (assigned by factory) 3.Pole Configuration: 30 = 3 Form X (3PST-NO-DM) 4.Coil Voltage (50/60 Hz.): Q = 24VAC U = 208/240VAC H = 480VAC J = 120VAC, molded M = 277VAC, molded T = 120VAC V = 277VAC I = 24VAC, molded K = 208/240VAC, molded W = 480VAC, molded 5.Contact Ratings (Inductive): 120 = 120 FLA 6.Customer ID Suffix: 999 = Standard Model 000-998 = Factory assigned customer ID 7. Option Code: Leave Blank = No customer-specific options A - ZZ = Factory assigned customer-specific options. Standard part numbers listed below are more likely to be available from stock. 3100Y30Q120999CJ 3100Y30T120999CJ 3100Y30U120999CJ Outline Dimensions Termination 5.00 2.50 (127.0) 4.625 (63.5) (117.48) CLEARANCE FOR #10 SCREW .563 (14.3) 4.437 6.375 Standard 6.00 (112.7) (161.92) (152.4) on 120 FLA 4.625 Lug accepts 14-0 (117.47) Cu/Al AWG .265 (6.73) 5.10 2.5 .187 (129.54) (63.5) (4.75) 2.875 .203 DIA. (73.025) 3.25 Shown with Optional Auxiliary Switch (5.16) (82.55) Auxiliary Switches Equipped with 0.250” (6.35) Quick Connect Terminals Various interlock / auxiliary switches are available for the Model A contactor. Factory Modifications Field Added Kits Description Contact Config. Kit Catalog Number of NO NC Number Kits Required Single unit interlock 1 0 34300-303 1 configurations listed. 0 1 34300-331 1 Maximum of two. Must 1 1 34300-332 1 be same polarity. 2 0 34300-303 2 NORMALLY OPEN NORMALLY CLOSED See footnote (1) for ratings. 0 2 34300-331 2 -303 STYLE -331 STYLE 2 2 34300-332 2 SPDT Circuit 1 1 34300-337 1 See footnote (2) for ratings. 2 2 34300-337 2 SPDT Dry Circuit, 0.1 amp max. 1 1 34300-341 1 Gold Flashed Contacts 2 2 34300-340 1 Equipped with #6-32 Screw Terminals & Saddle Clamps Factory Modifications Field Added Kits NORMALLY OPEN & CLOSED SPDT Description Contact Config. Kit Catalog Number of -332 STYLE -337 & -341 STYLE NO NC Number Kits Required Single unit interlock 1 0 34300-342 1 configurations listed. 0 1 34300-343 1 Maximum of two. Must 1 1 34300-344 1 be same polarity. (note 1) Footnotes: Ratings of Auxiliary Interlocks / Switches (1) Contact Rating Single Circuit NO or NC (2) Contact Rating SPDT (337): and two circuit NO/NC: 10A, 1/3 HP, 125 or 250 VAC 120V 240V 480V 600V 1/2A, 125 VDC; 1/4A, 250 VDC: W/ #6-32 SCREW & SADDLE CLAMP Break 3.0A 1.5A 0.75A 0.6A 4A 120 VAC on Lamp Load -344 STYLE Make 30A 15A 7.5A 6A Continuous 10A 10A 10A 10A Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 841 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 PRODUCTS UNLIMITED Engineering Notes Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 842 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 LATCHING, IMPULSE, ROTARY & SPECIAL APPLICATION RELAYS Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 136 ....................... Traffic Light (Flash Transfer) Relay........ 916 GP ........................ Control Relay......................................... 917 KBP ...................... Mechanical Latching Relay ................... 910 KUL ...................... Magnetic Latching Relay ....................... 908 Transformers.............................. 201-212 2 MDR ..................... Rotary Relay (High Shock Resistance) .. 914 NOTE: In addition to the products listed in this section of the ML ........................ Magnetic Latching Control Relay .......... 917 databook, we offer latching versions of some of our TR ......................... Timing Control Relay ............................. 917 Low-signal PC Board Relays 301-338 other relay series. Following is a list of these products: 3 PE (latching) ......... Magnetic Latching Relay ....................... 902 PCKWK................. Magnetic Latching Relay ....................... 904 Low Signal Relays FP2 ........................................................................... 323 RT (latching) ......... Magnetic Latching Relay ....................... 906 FX2 ........................................................................... 329 Mid-Range PC Board Relays ....... 19-21 S89R/S90R ........... Impulse Relay ....................................... 912 4 IM ............................................................................. 321 V23026 (P1) .............................................................. 314 V23079 (P2) .............................................................. 325 Power PC Board Relays ................ 22-35 Mid-range PC Board Relays 5 0409 ......................................................................... 488 RP 3 SL .................................................................... 486 V23148 (U/UB) ......................................................... 428 Relays with 6 Forcibly-Guided Contacts Many of the products in our line of high performance .............. 36-79 relays and contactors (see overview in section 14 of this databook) are also offered as latching devices. Plug-in/Panel Mount 7 General Purpose Relays................ 80-88 Power Relays & Definite 8 Purpose Contactors...................... 89-131 Latching, Impulse, Rotary & 9 Special Application Relays ... 901-920 Automotive Relays ......................141-148 10 Solid State Relays & 11 Input/Output Modules ................195-207 Time Delay Relays & 12 Counters ........................................208-232 Sensors & Monitors ...................233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 901 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK PE Latching series 5 Amp, Miniature, Single Coil Printed Circuit Board Relay File E38891 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Mechanical Data • 1 Form C (SPDT). Termination: Printed circuit terminals. • 5 amp rated current. Enclosure (94 V-0 rated): Flux-tight plastic case. • 10mm height. Weight: 0.18 oz. (5 g) approximately. • Flux-tight for wave soldering. • Supplied in tubes. • DIP configuration. • 4kV coil-to-contact insulation. Contact Life Contact Data Arrangement: 1 Form C (SPDT). Material: Silver-nickel 90/10. Expected Mechanical Life: 5 million operations. Ratings: 5 amp 250VAC resistive 100,000 operations. Initial Dielectric Strength Between Open Contacts: 1,000VAC. Between Coil and Contacts: 4,000VAC. Creepage/Clearance Coil-Contact: >3.2/4mm. Coil Data @ 20°C Nominal Coil Power: 360mW. DC Nominal Max. DC Load Breaking Capacity Nominal Resistance Pull-in Reset Coil Voltage in Ohms Voltage Voltage Current VDC ±10% VDC VDC (mA) 03 25 2.25 2.25 120.0 05 69 3.75 3.75 72.0 06 100 4.5 0.6 60.0 12 400 9.0 1.2 30.0 24 1,600 18.0 2.4 15.0 Operate Data Minimum Energization Time: 20 ms, at nom. voltage. (Consult factory on information on reduced pulse duration at higher voltages.) Maximum Energization Time: 1 min. at 10% duty cycle. Maximum Reset Voltage: 120% of nominal voltage at -40°C. Switching Rate: 360 ops./hr. max. at rated load. Coil Operating Range Coil Operation Version A.. C.. Coil Terminals A1 A2 A1 A2 Pull-In Polarity +– –+ Reset Polarity –+ +– Note: Contact position not defined at delivery. Environmental Data Temperature Range: Operating: -40°C to +70°C. Shock (Destructive): >100g. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 902 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information Typical Part Number B PE 0 1 4 A06 1. Basic Series: PE = Miniature printed circuit board relay. 2. Enclosure*: 0 = Flux-tight. 3. Contact Arrangement: 1 = 1 Form C (SPDT) 4. Contact Material: 4 = Silver-nickel 90/10 5. Coil Type & Voltage (see Coil Data table and Coil Operation table for details): A03 = 3VDC, positive voltage applied to Terminal A1 results in pull-in. C03 = 3VDC, positive voltage applied to Terminal A2 results in pull-in. A05 = 5VDC, positive voltage applied to Terminal A1 results in pull-in. C05 = 5VDC, positive voltage applied to Terminal A2 results in pull-in. A06 = 6VDC, positive voltage applied to Terminal A1 results in pull-in. C06 = 6VDC, positive voltage applied to Terminal A2 results in pull-in. A12 = 12VDC, positive voltage applied to Terminal A1 results in pull-in. C12 = 12VDC, positive voltage applied to Terminal A2 results in pull-in. A24 = 24VDC, positive voltage applied to Terminal A1 results in pull-in. C24 = 24VDC, positive voltage applied to Terminal A2 results in pull-in. * Sealed version available on request. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) .787 .394 12 A2 (20.0) (10.0) .394 (10.0) 14 11 A1 .149 .055 (3.8) (1.4) PC Board Layout (Bottom View) .051 + 0.004 – 0 1.3 + 0.1 – 0 ( ) .30 (7.62) .047 .30 (1.2) (7.62) .70 (17.78) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 903 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 OEG PCKWK series Latching, Slim 16Amp Miniature Power PC Board Relay Appliances, HVAC, Office Machines. Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 20°C PCKWK • Efficient, latching operation. • Slim outline to save board space. Rated Coil SET Coil RESET Coil SET Coil RESET Coil • 1 Form A contact arrangement. Voltage Resistance Resistance Voltage Range Voltage Range (VDC) (ohms) ± 10% (ohms) ± 10% (VDC) (VDC) 12 80 180 6.0 - 9.0 2.0 - 7.0 Contact Data @ 20°C Arrangements: 1 Form A (SPST-NO). Material: Ag Alloy. Max. Switching Rate: 300 ops./ min. (no load). 20 ops./ min. (rated load). Operate Data @ 20°C Expected Mechanical Life: 5 million ops (no load). SET Time: 10 ms max. (including bounce) at rated voltage. Expected Electrical Life: 100,000 ops (16A @ 250VAC). 8 ms max. (including bounce) at 130% rated voltage. Minimum Load: 100mA @ 5VDC. RESET Time: 10 ms max. at rated voltage. Initial Contact Resistance: 100 milliohms @ 1A, 6VDC. 8 ms max. at 130% rated voltage. The pulse to either the set or reset coil of the PCKWK relay should be no less than 30 milliseconds duration, and no more than 1 second duration. Contact Ratings Observe coil polarity. Ratings: 16A @ 277VAC resistive. Max. Switched Voltage: AC: 277V. Do not apply voltage to both SET and RESET coils simultaneously. Max. Switched Current: 16A. Max. Switched Power: 4,432VA. External magnetic fields may affect the operation of the relay. Initial Dielectric Strength Between Open Contacts: 1,000VAC, 50/60 Hz. (1 min.); 1,200VAC, 50/60 Hz. (1 sec.). Environmental Data Between Contacts and Coil: 4,000VAC, 50/60 Hz. (1 min.); Temperature Range: 4,800VAC, 50/60 Hz. (1 sec.). Operating: -30°C to +70°C. Surge Voltage Between Coil and Contacts: 10,000V (1.2/50μs). Vibration, Mechanical: 10 to 55Hz., 1.5mm double amplitude for 2 hr. Operational: 10 to 55Hz., 1.5mm double amplitude for 5 min. 2 Shock, Mechanical: 980m/s . 2 Operational (when SET): 98m/s . 2 Operational (when RESET): 980m/s . Operating Humidity: 20 to 65% RH. (Non-condensing). Initial Insulation Resistance Between Mutually Insulated Conductors: 1,000Mohm @ 500VDC. Coil Data Voltage: 12VDC (Consult factory for other coil voltage). Mechanical Data Nominal Power: 1.8W (SET). Termination: Printed circuit terminals. 800mW (RESET). Enclosure: Vented (Flux-tight) plastic cover. Max. Coil Power: 130% of nominal at 20°C. Weight: 0.49 oz (14g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 904 Refer to inside back cover. specified. Catalog 1308242 Issued 3-03 OEG Ordering Information Typical Part Number B PCKWK -1 12 D 2 M ,000 1. Basic Series: PCKW = 16A double coil relay 2. Termination: 1 = 1 pole 3. Coil Voltage: 12= 12VDC Consult factory for other voltages. 4. Coil Input: D = Standard 5. Contact Material: 2 = AgSnO 6. Contact Arrangement: M = 1 Form A (SPST-NO) 7. Suffix: ,000 = Standard model Other Suffix = Custom model * Not suitable for immersion cleaning processes. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Wiring Diagram (Bottom View) Outline Dimensions .457 .957 (11.60) (24.30) + RESET SET + COIL COIL – 1.05 (26.7) .039 (1.0) .039 .012 PC Board Layout (Bottom View) (1.0) (.3) .039 .059 (1.0) .102 .138 .039 (1.50) (2.60) (3.5) (1.0) .043 .677 .027 .171 (17.20) (0.70) (1.10) (4.35) .295 .026 (7.50) (0.65) .181 .171 (4.60) (4.35) .295 .026 (7.50) (0.65) .677 .043 .027 (17.20) (1.10) (0.70) .033 5 – .059 DIA .059 (0.85) (1.50) (1.50) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 905 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK RT series (Latching) 16 Amp Miniature Printed Circuit Board Relay File E38891 NR 6106 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data @ 20°C Features Voltage: 5 to 24VDC*, 1 coil. • Latching relay with 1 or 2 coils. 3 to 24VDC*, 2 coil. • SPDT (16A) and DPDT (8A) contact arrangements. • Flux tight enclosure. Nominal Power @ 25°C: 400mW, 1 coil. • Meets VDE 10mm spacing, 5kV dielectric, coil to contacts. 600mW, 2 coil. • Conforms to UL 508, 1873 and 353. Duty Cycle: Continuous. • UL Class F (155°C) coil construction Initial Insulation Resistance: 10,000 megohms, min., at 20°C, 500VDC • Schrack brand and 50% rel. humidity. Coil Construction: UL Class F (155°C). * Other coil voltages upon request. 1 Coil Data Contact Data DC Nominal Arrangements: 1 Form C (SPDT) Wiring Diagram Code 3. Nominal Resistance Set Reset Coil 2 Form C (DPDT) Wiring Diagram Code 5. Voltage in Ohms Voltage Voltage Current Material: Silver-nickel 90/10. VDC ±10% VDC VDC (mA) Minimum Load: 12V/100mA. Expected Mechanical Life: 5 million operations, 1 pole. 05 62 3.5—6.0 2.75—6.0 80.0 2 million operations, 2 pole. 06 90 4.2—7.2 3.30—7.2 66.7 12 360 8.4—14.4 6.60—14.4 33.3 24 1,440 16.8—28.8 13.20—28.8 16.7 2 Coil Data Designed to meet UL/CSA/VDE ratings with relay proper- DC Nominal ly vented. Remove vent nib after soldering and cleaning. Nominal Resistance Set Reset Coil Voltage in Ohms Voltage Voltage Current UL/CSA ratings @ 70°C: VDC ±10% VDC VDC (mA) Code NO/NC Load Type Operations 05 42 3.5—7.5 2.75—4.5 120.0 3 16A/8A @ 240VAC GP 6K 06 55 4.2—9.0 3.30—9.0 108.0 8A @ 28VDC Resistive 30K 12 240 8.4—18.0 6.60—18.0 50.0 1/2 HP @ 120VAC* Motor 6K 24 886 16.8—36.0 13.20—36.0 27.0 1HP @ 240VAC* Motor 6K 48 LRA, 8 FLA @ 240VAC Motor 30K B300 Pilot Duty 6K 5 8A @ 240VAC Resistive 30K 8A @ 28VDC Resistive/GP 30K 1/2 HP @ 240VAC Motor 6K Operate Data @ 20°C 1/4 HP @ 120VAC Motor 6K B300 Pilot Duty 6K Must Operate Voltage: See coil data. Operate Time (Excluding Bounce): 5 ms, typ., at nom. voltage. * Form A only Release Time (Excluding Bounce): 4 ms, typ., at nom. voltage. Max. Switching Rate: 360 ops. at rated load. VDE Ratings @ 70°C: Code NO/NC Load Type Operations 3 16A@ 250VAC Resistive 10K 8A @ 250VAC Resistive 30K Environmental Data 5 8A @ 250VAC Resistive 30K Temperature Range: 8A @ 250VAC Resistive 100K Storage: -40°C to +105°C. Operating: -40°C to +70°C at rated current. Vibration: 30 - 500 Hz: N/C opens at >3g and changes from reset to set at >5g; Shock: N/C opens at >6g and changes from reset to set at >15g.; Initial Dielectric Strength Mechanical Data Termination: Printed circuit terminals. Between Open Contacts: >1,000VAC (1 minute). Between Poles (code 5): >2,500VAC (1 minute). Enclosures: RT 3, 4: Flux-tight, top vented, plastic case. Weight: 0.46 oz. (13g) approximately. Between Coil and Contacts: >5,000VAC (1 minute). Creepage/Clearance, Coil to Contact: 10/10mm. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 906 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SCHRACK Ordering Information (Latching Model) Typical Part Number B RT 3 2 4 A05 1. Basic Series: RT = Miniature, printed circuit board relay. 2. Enclosure: 3 = 1 pole 16A, Pinning 5mm, flux-tight (Code 3). 4 = 2 pole 8A, Pinning 5mm, flux-tight (Code 5). 3. Contact Arrangement: 1 = 1 Form C (SPDT) (Requires wiring diagram code 3.) 2 = 2 Form C (DPDT) (Requires wiring diagram code 5.) 4. Contact Material: 4 = Silver-nickel 90/10. 5. Coil Voltage: 1 Coil 2 Coil Voltage A05 F05 = 5VDC A06 F06 = 6VDC A12 F12 = 12VDC A24 F24 = 24VDC Note: All latching model RT part numbers are Schrack brand, are orange in color and have UL Class F (155°C) coil construction. Our authorized distributors are more likely to stock the following items for immediate delivery. None at present. Outline Dimensions Wiring Diagrams (Bottom View) .50 .62 1 Pole 16A 2 Pole 8A (12.7) (15.7) 6X .031 X .020 14 24 12 22 (.80 X .52) 11 21 11 21 1.14 12 22 14 24 (29) 2X .020 X .020 * 22 A3*A2 A1 A3*A2 (.52 X .52) *2 Coil version only .17 * 2 Coil Version Only (4.3) Code 5 Code 3 1 Coil 2 Coils Coil Terminals A1 A2 A1 A3 A2 Operate + – + – Reset –+–+ Contact position not defined at delivery. PC Board Layout (Bottom View) 1 Pole 16A 2 Pole 8A Breaking Capacity 5mm 1 Pole 2 Pole .051 DIA. (1.30) 50 50 A .394 10 10 (10.0) B 5 5 .788 2 2 A B (20.0) 1 1 0.5 0.5 * .051 DIA. .296 0.1 0.1 (1.30) 10 20 50 100 200 300 10 20 50 100 200 300 (7.52) DC Voltage DC Voltage * .148 (3.76 * 2 Coil Version Only A: 1 Contact. A: 16A Version. B: 2 Contacts in series. B: 12A Version. Code 3 & 5 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 907 specified. Refer to inside back cover. Contact Current Contact Current Catalog 1308242 Issued 3-03 P&B KUL series 10 Amp Magnetic Latching Relay File E22575 File 15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features DC Must • Single or dual-wound DC coils or single-wound AC coils. Nominal Resistance Operate 0.5 W • Contact arrangements to 3PDT. Voltage in Ohms Voltage Resistor • Reset occurs by reversing polarity in a single coil relay or by energizing ± 10%† the reset winding in dual coil relays. • Uses same sockets as other KU relays. Single Coil • Well suited for applications such as alarm systems, machine tools, 12 120 9.0 ___ battery chargers and process controls. DC 24 472 18.0 ___ Coils 48 1,800 36.0 ___ Dual Coil* 12 90 9.0 ___ 24 350 18.0 ___ 48 1400 36.0 ___ Contact Data @ 25°C Single Coil with Diodes** Arrangements: AC 24 176 20.4 680Ω DC Single Coil: 1 Form C (SPDT), 2 Form C (DPDT) and Coils 120 3,700 102.0 15,000Ω 3 Form C (3PDT). 50/60 Hz. 240 17,900 204.0 68,000Ω DC Dual Coil: 1 Form C (SPDT) and 2 Form C (DPDT). Dual Coil AC Single Coil: 1 Form C (SPDT), 2 Form C (DPDT) and Latch Reset 3 Form C (3PDT). 24 100 250 20.4 ___ Materials: Siver-cadmium oxide. 120 2525 7800 102.0 ___ Expected Life: Mechanical: 10 million operations. * Dual coil available only with 1 or 2 Form C contacts. On standard dual Electrical: 100,000 operations minimum at rated load. coil relays, the latch and unlatch voltage must be the same. For unlike voltages, please contact your sales representative. ** Diodes and resistors included inside relay with 1 and 2 Form C contacts. For 3 Form C relays, the customer must furnish and wire Contact Ratings diodes and resistors externally. † ±15% for AC coils. Contact Arrangement Ratings Code 5 1,2,3 poles 10A @ 28VDC or 240VAC, 80% PF; 1/4 HP @ 120VAC, 1/3 HP @ 240VAC Operate Data @ 25°C Must Operate Voltage: DC Coils: 75% of nominal voltage. Initial Dielectric Strength AC Coils: 85% of nominal voltage. Operate Time : 25 milliseconds maximum at nominal voltage. Between Open Contacts: 500V rms. Release or Reset Time: 25 milliseconds maximum at nominal voltage. Between Adjacent Contacts: 1,500V rms. Between Contacts and Coil: 1,500V rms. Environmenal Data Temperature Range: Storage: -45°C to +105°C. Operating: Coil Data @ 25°C Single Coil AC & DC: -45°C to +70°C. Duty Cycle: Continuous. (Latch and reset not to be energized Dual Coil DC: -45°C to +50°C. simultaneously). Initial Insulation Resistance: 100 megohms, minimum. Initial Breakdown Voltage: 1500V rms, 60 Hz. between all elements. Mechanical Data Termination:.187" (4.75mm) quick connect/solder terminals. Sockets are Note: On single coil AC models one terminal is common. Latch/Reset function is available. accomplished by input in series with a diode to provide the correct polarity to the coil. Enclosure: Clear plastic polycarbonate heat and shock resistant case. To perform either function, the terminal not being used (Latch or Reset) must be open Weight: 3.4 oz. (96g) approximately. or isolated with no other path to common or ground. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 908 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part No. B KUL -11 D 1 1 D -12 1. Basic Series: KUL magnetic latching relay 2. Contact Arrangement: 5 = 1 Form C (SPDT) 11 = 2 Form C (DPDT) 14 = 3 Form C (3PDT) 3. Coil Input: A = AC D = DC 4. Mounting: 1 = Plain case 5 = Bracket mount case 5. Terminal & Contact Materials: 5 = .187" (4.75mm) quick connect/solder; silver-cadmium oxide, 10 amps. 6. Number of Coils: S = Single coil D = Dual coil (1 & 2 pole models only) 7. Coil Voltages: Single coil—24-240VAC 12-48VDC Dual coil—12-48VDC, 24 or 120VAC (to 2 Form C) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.. KUL-5A15S-120 KUL-11A15S-120 KUL-11D15D-24 KUL-11D15S-24 KUL-11A15S-24 KUL-11D15D-12 KUL-11D15S-12 Outline Dimensions Wiring Diagrams (Bottom Views) Single Coil Type S Dual Coil Type D 1 2 3 DC Single Coil AC Coil AC or DC Dual Coil 4 5 6 1 Form C 1 Form C 1 Form C 1.406 MAX. 2 7 8 9 (35.71) 2 2 5 5 5 A B 7 9 RESET 7 7 89 + - 2.156 MAX. 1.531 MAX. AB LATCH AB AB (54.76) (38.89) RESET + COMMON - - + LATCH + - RESET Note 2 LATCH 1.378 MAX. 2 Form C 2 Form C 2 Form C (35.0) 1 3 1 3 1 3 - 4 6 4 6 4 5 6 2.125 MAX. 7 8 9 7 8 9 7 9 (53.96) AB AB 2.156 MAX. + AB LATCH - + (54.76) COMMON - + LATCH LATCH Note 2 + - Polarity for DC only. RESET See KU series drawings for bracket mount case. 3 Form C 3 Form C 1 2 3 1 2 3 Terminal Dimensions 4 5 6 4 5 6 .187" (4.75mm) Standard 7 8 9 7 8 9 LATCH AB AB .125 .078 Note 3 (3.18) (1.98) - + LATCH RESET + - RESET .187 ± .002 (4.75 ± .05) Note 1 Contact positions shown in diagrams is with the “RESET” input having been energized last. .250 (6.35) HEADER Note 2 Do not connect any low impedance loads from terminal B to A. .281 REF. (7.14) Note 3 Resistor and diodes connected by customer. See Coil Data Chart on KUL Series .020 engineering data page for resistor value. Recommended using 1N4007 diode. THICKNESS (.51) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 909 specified. Refer to inside back cover. RESET RESET Catalog 1308242 Issued 3-03 P&B KBP series 10 Amp Dual Coil Latching Relay File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Coil Data Features • Dual coil latching relay accepts a momentary impulse to one coil to Resistance in Nominal latch and a second impulse to the other coil to release. Nominal Ohms Current • Enclosed in a clear polycarbonate dust cover. Voltage ±10% @ 25°C Milliamperes • AC or DC coils. • Contacts up to 5PDT. DC 12 52.0 230 Coils 24 230 104 • Mounts in 11 or 20-pin octal-type plugs. 48 850 56.5 (to 5 pole) 110 4560 24 220 Use 110 volt relay with 5000 Ohms, 5 watt resistor in series. Resistance in Nominal Nominal Ohms Current Voltage ±15% @ 25°C Milliamperes Up to 4 Pole Relays 24 42 210 Contact Data @ +25°C AC 120 1030 44 Arrangements: From 2 Form C (DPDT) to 5 Form C (5PDT), Coils 240 4100 22 (3PDT each coil). For 5 Pole Relays Ratings: 10 amps @ 120VAC. 24 27 325 Materials: 10 amp models: Silver-cadmium oxide. 120 700 68 Expected Life: 500,000 operations, mechanical; 50,000 operations minimum at rated loads. Operate Data @ +25°C Must-Operate Voltage: DC: 75% of nominal voltage. AC: 85% of nominal voltage. Operate Time: 25 milliseconds excluding bounce. Initial Dielectric Strength Between Open Contacts: 500V rms. Between Adjacent Contacts: 1,000V rms. Between Contacts and Coil: 1,000V rms. Environmental Data Temperature Range: Storage: 105°C. Operating: -45°C to +85°C. Coil Data @ +25°C Nominal Power: Mechanical Data DC Coils: 2.7W. AC Coils: 5.3VA to 4 pole; 7.8VA to 5 pole. Termination: See terminals table on next page. Maximum Power: DC coils - 4.0W. Enclosures: Plastic dust cover standard. Hermetically sealed Duty Cycle: Intermittent. metal case available on special order. Initial Insulation Resistance: 100 megohms. Weight: 10.8 oz. (306g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 910 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information Typical Part Number B KBP -11 A G -24 1. Type: KBP = Enclosed, dual coil latching relay. KB = Open, dual coil latching relay. 2. Contact Arrangement: 11 = 2 Form C (DPDT) 17 = 4 Form C (4PDT) 20 = 5 Form C (5PDT) 3. Coil Input: A = AC D = DC 4. Contact Rating: G = 10 amps @ 120VAC, 80% PF. 5. Coil Voltage: 12, 24, 48, 110VDC Specify the same latch and release coil voltage for standard KBP 24, 120, 240VAC relays. Unlike coils available on special order. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. KB-17AG-120 KBP-11DG-110 KBP-11AG-120 KB-17DG-12 KBP-11DG-24 KBP-20AG-120 Outline Dimensions 27E928 Socket KB-Open Style Dust Cover 2.205 MAX. 1.781 MAX. TYP. (36.01) (45.24) .250 .500 (6.35) (12.7) 2 HOLES 1.187 REF. TYP. .157 DIA. REF. .005 (0.127) (30.15) 3.56 MAX. .010 (0.254) (3.99) 1.496 REF. (90.4) (38.00) 1.265 .156" DIA. 1.812 ± .015 (32.13) (4) MTG. HOLES (46.02 ± 0.38) (2 HOLES EACH .875 REF. TYP. 1.375 FOR END OR (22.23) .91 REF. (34.92) BOTTOM MOUNTING.) (23.1) .165 .44 ± .03 (4.19) .25 1.609 (11.2 ± .8) 2.406 MAX. (6.35) (40.87) 1.25 ± .03 .031 REF. 3.22 .56 ± .03 (61.11) (31.8 ± .8) (0.79) (14.2 ± .8) (81.79) Wiring Diagrams (Bottom Views) 91 1 9 1 1 13 13 6 7 7 5 7 10 12 12 10 4 8 8 14 8 14 6 16 6 5 5 16 15 9 4 15 18 4 18 3 3 2 2 17 3 17 10 2 20 20 1 1 19 1 19 11 Latch Reset Reset Reset Latch Latch KBP11 KBP17 KBP20 Note: Shown with reset coil energized last. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 911 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B S89R/S90R series Bistable, Impulse Relay 15 and 20 Amp Industrial Rating Continuous Coil Rating File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. S89R S90R Insulation: Class B (130°C). Features Initial Breakdown Voltage: 1,500V rms, 60 Hz. • Low cost, bistable impulse relay. Must-Operate Voltage: • Operates on 75ms min. pulse. DC Coils: 75% of nominal voltage @ +25°C. • Used in garage door controls, motor reversing and lighting controls. AC Coils: 85% of nominal voltage @ +25°C. • S89R available with plastic cover and octal plug-in base. Coil Data Contact Data @ 25°C Ratings: S89R: 15 amps, 1/2 HP, 125/250VAC; 5 amps, 125VAC, tungsten Nominal Resistance Nominal filament lamp load; 1/2 amp, 125VDC; 1/4 amp, 250VDC. Voltage DC Ohms Current Expected Life: 100,000 operations, mechanical; 50,000 operations at ±15% @ +25°C mA rated loads. 24VAC 8.7 375 Ratings: S90R: 120VAC 260 75 240VAC 1084 38 Load Minimum Life 6VDC 5.8 1035 20A, 120VAC or 7.5A, 277VAC, Tungsten. 10,000 Cycles 12VDC 22.5 533 15A, 125VAC or 7A, 277VAC, Fluorescent. 10,000 Cycles 24VDC 92 260 20A, 277VAC, 75-80% PF. 50,000 Cycles 1 HP, 125VAC, 50/60 Hz. 50,000 Cycles 2 HP, 250VAC, 50/60 Hz. 50,000 Cycles 12 FLA, 60 LRA, 120VAC. 50,000 Cycles 8 FLA, 48 LRA, 240VAC. 50,000 Cycles Environmental Data Pilot Duty, 360VA, 125/250VAC. 50,000 Cycles Temperature Range: -10°C to +60°C. Coil Data @ 25°C Nominal Power: Mechanical Data DC Coils: 6.33 Watts @ +25°C. Weight: 7.75 oz. (241g) approximately. AC Coils: 9VA @ +25°C. Ordering Information Typical Part No. B S89R 5 A B D 1 -24 1. Basic Series: S89R = 15A S90R = 20A 2.Contact Arrangement: 5 = SPDT 11 = DPDT 17 = 4PDT 3.Coil Input: A = AC D = DC 4.Coil Terminal Style: A = .187" (4.75mm) Quick connect/solder. P = Dust cover with octal plug-in base. (S89R only.) B = .250" (6.35mm) Quick connect/solder. 5.Switch Terminal Style: C = .187" (4.75mm) Quick connect.* P = Dust cover with octal plug-in base.* D = .250" (6.35mm) Quick connect. * S89R only. 6.Switch Terminal Configuration: 1 = Style 1 (See outline drawings.) 7. Coil Voltage: 24, 120, 240VAC 6, 12, 24VDC Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. S89R11DAC1-24 S90R5ABD1-120 S89R5ABD1-24 S89R11AAC1-24 S89R11ABD1-120 S90R11ABD1-24 S89R11APP1-120 S89R11DBD1-12 S89R5ABD1-120 S89R11AAC1-120 S89R11DBD1-24 S90R11ABD1-120 S89R5DBD1-12 S89R11ABD1-24 S89R11DAC1-12 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 912 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions Open Relays Enclosed Relays S89 Series 2.42 MAX. 1.86 MAX. (61.5) (47.2) Wiring Diagram 3.588 MAX. 2.70 MAX. (91.14) 3.050 MAX. (68.6) (77.47) 1.844 ± .015 (46.84 ± .381) .203 .56 (5.16) (14.2) INPUT 1.781 MAX. .078 1.00 (45.24) (1.98) (24.5) INSULATORS USED .562 MOUNTING PLATE ON S90R SERIES (14.3) 2.406 MAX. 2.00 MAX. (61.11) (50.8) TAPPED #8-32 THREAD TYP. (2) PLACES 2.42 MAX. (61.5) 1.98 MAX. (50.3) 1.000 (25.40) 1.326 ± .006 (33.68 ± .152) Switch Terminal Style Switch Terminal Configuration C = .187" (4.75mm) Quick-connect Style 1 D = .250" (6.35mm) Quick-connect .187" (4.75mm) .250" (6.35mm) COM. Quick Connect Quick Connect S89R S89R S90R C D .188 .250 .066 D. .055 D. (4.78) (6.35) (1.68) (1.40) .312 .250 (6.35) (7.92) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 913 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B MDR series 10 Amp Rotary Relay For Demanding Shock & Vibration Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Small 4PDT Medium 24PDT Features Operate Data @ 25°C Type Typ. Operate Time (ms) Typ. Release Time (ms) • AC and DC coils, latching and non-latching. • 4PDT through 24PDT contact arrangements. Small AC Non-Latching 5 to 12 5 to 18 • Contacts will not chatter when relays are subjected to high-impact shock Small DC Non-Latching 15 to 30 5 to 15 Small AC Latching 6 to 12 N/A blows of 2000 ft.-lbs. Small DC Latching 10 to 16 N/A Medium AC Non-Latching 6 to 12 6 to 20 Medium DC Non-Latching 65 to 90 10 to 30 Contact Data Medium AC Latching 8 to 14 N/A Medium DC Latching 30 to 80 N/A Arrangements: 4 Form C (4PDT) through 24 Form C (24PDT). Latching Two-Position Types: Except for the latching feature, MDR Contact Ratings latching relays utilize the same general construction as non-latching types. Single Contacts Two Contacts in Series They have two sets of coils and provide a latching two-position operation. 10A, 115VAC 3A, 440VAC L M K 3A, 28VDC 15A, 115VAC 1 3 0.8A, 125VDC 1.5A, 125VDC Contacts Shown With A J Coil Coil The above AC contact ratings are based on contact loads having a 50% power factor. The DC Coil 1-2 De-Energized and B H contact ratings are based on resistive loads. Coil 3-4 Energized. G C 2 4 Contact Section F Coils Must be Energized Alternately, D E Not Simultaneously Environmental Data Temperature Range: Standard models: 0°C to +65°C. Special order models: 0°C to +90°C. FIXED CONTACT Mechanical Data Termination: #5-40 screw terminals supplied. Weight (Approx.): Small – 4 & 8PDT: 32 oz. (0.914 kg); 12PDT: 33 oz. (0.943 kg). Medium – 16PDT: 72 oz. (2.04 kg); 24PDT: 74 oz. (2.10 kg). Ordering Information and Coil Characteristics – No models in this series are maintained in stock. Type Part Number Contacts Coil Voltage Coil Current DC Coil Coil Power* Breakdown (60 Hz. for AC) (Amps) Resistance (Ohms) (Watts) (Volts RMS) Small MDR-131-1 4PDT 115VAC 0.215 66 6.5 1,230 Non - MDR-131-2 4PDT 440VAC 0.045 1,256 5.1 1,880 Latching MDR-135-1 4PDT 28VDC 0.362 76 10.0 1,308 MDR-137-8 4PDT 125VDC 0.082 1,520 10.3 2,375 MDR-134-1 8PDT 115VAC 0.215 66 6.5 1,230 MDR-134-2 8PDT 440VAC 0.045 1,256 5.1 1,880 MDR-136-1 8PDT 28VDC 0.362 76 10.0 1,308 MDR-138-8 8PDT 125VDC 0.082 1,520 10.3 2,375 MDR-163-1 12PDT 115VAC 0.230 62 6.9 1,230 MDR-163-2 12PDT 440VAC 0.055 940 6.3 1,880 Medium MDR-170-1 16PDT 115VAC 0.620 8.4 17.0 1,230 Non - MDR-170-2 16PDT 440VAC 0.160 107 17.0 1,880 Latching MDR-172-1 16PDT 28VDC 0.667 42 18.7 1,308 MDR-173-1 16PDT 125VDC 0.125 1,024 16.0 2,375 MDR-141-1 24PDT 115VAC 0.620 8.4 17.0 1,230 MDR-141-2 24PDT 440VAC 0.160 107 17.0 1,880 MDR-167-1 24PDT 28VDC 0.667 42 18.7 1,308 Small MDR-67-2 4PDT 115VAC 0.150 210 5.5 1,230 Latching MDR-4091 4PDT 440VAC 0.020 4,500 3.0 1,880 MDR-67-3 4PDT 28VDC 0.778 36 21.8 1,308 MDR-5060 4PDT 125VDC 0.164 760 20.6 2,375 MDR-4076 8PDT 115VAC 0.150 210 5.5 1,230 MDR-4092 8PDT 440VAC 0.020 4,500 3.0 1,880 MDR-5035 8PDT 28VDC 0.778 36 21.8 1,308 MDR-5061 8PDT 125VDC 0.164 760 20.6 2,375 Medium MDR-6064 12PDT 115VAC 0.380 24 12.0 1,230 Latching MDR-7020 12PDT 28VDC 0.316 88.6 8.8 1,308 MDR-66-4 16PDT 115VAC 0.380 24 12.0 1,230 MDR-7036 16PDT 125VDC 0.083 1,500 10.4 2,375 * Actual Wattmeter readings Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 914 specified. Refer to inside back cover. G J H K J L K M L A M B Catalog 1308242 Issued 3-03 P&B Outline Dimensions Tolerances: Decimals ± .010 (± .25) Unless Otherwise Specified Small Models .196 ± .005 DIA. (4.98 ± .13) Overall Height 3 4 HOLES 4PDT 3.13" (79.5mm) Max. 2 8PDT 3.53" (89.7mm) Max. 1 12PDT 3.88" (98.6mm) Max. Coil and Contact Terminal Screws #5-40 Supplied 2.125 2.625 (53.98) (66.68) 12 COIL 2.125 (53.98) 2.625 (66.68) Medium Models .281 ± .005 DIA. (7.14 ± .13) 4 HOLES 6 5 Overall Height 4 12PDT 4.63" (117.6mm) Max. 16PDT 5.00" (127.0mm) Max. 3 24PDT 5.75" (146.1mm) Max. 2 3.250 1 Coil and Contact Terminal Screws #5-40 Supplied (82.55) 4.190 (106.43) 12 3.250 (82.55) 4.190 COIL (106.43) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 915 specified. Refer to inside back cover. A C B C D E D F E F G H Catalog 1308242 Issued 3-03 P&B 136 series DPDT, 20 Amp Traffic Control (flash transfer) Relay CALTRANS approved NEMA approved Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data @ 25°C • The Type 136 is a small power relay that will switch a 20 amp tungsten Nominal Voltage: 120VAC. load at 120VAC. Resistance (±10%): 390 ohms. • Mechanical life in excess of 5 million operations is obtained by the use of Nominal Power: 10VA. a wide friction-free knife-edge frame design and armature assembly. Duty Cycle: Continuous. • The dust cover enclosure is fitted with an 8-position Jones plug. Temperature Rise: 45°C. • All ratings are at 25°C ambient. Operate Data @ 25°C Contact Data @ 25°C Must Operate Voltage: 85% of nominal voltage. Materials: Silver-palladium, .375 (9.52) diameter. Rating: 20 amps, tungsten @ 120VAC. Expected Life: 5 million operations, mechanical; 250,000 operations at rated load. Mechanical Data Mounting: Socket mount. Termination: 8-position Jones Plug compatible with CINCH 2400 series socket. Initial Dielectric Strength Enclosure: Clear polycarbonate dust cover. Weight: 11 oz. (312g) approximately. Between All Points: 1,500VAC. Ordering Information Part Number Description 136-62T3A1 Traffic Control (Flash Transfer Function) Relay (120VAC coil; contacts rated 20A tungsten @ 120VAC) Our authorized distributors are likely to maintain the above-listed part number in stock for immediate delivery. Outline Dimensions Wiring Diagram 1.00 .460 (25.4) (11.68) 2.80 .500 (71.12) .550 (12.7) (13.97) 2.375 (60.32) .420 (10.66) .250 .062 (6.35) Terminal Detail (1.57) 1.75 (44.45) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 916 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT GP/ML/TR series 10 Amp Control Relay Non-latching, Latching & Timing Versions File E15631 File LR29186 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. SERIES GP SERIES TR GP/ML/TR Design Features Features Among the advances AGASTAT control relays offer over existing designs is • Occupies very small panel space a unique contact operating mechanism. An articulated arm assembly • May be mounted singly, in continuous rows or in groups. amplifies the movement of the solenoid core, allowing the use of a short • Available with screw terminal molded socket. stroke coil to produce an extremely wide contact gap. The long support • 4 SPDT contacts. arms used in conventional relays are eliminated. Both current capacity and • Magnetic blowout device option increases DC current carrying ability shock/vibration tolerance are greatly increased, as well as life expectancy. approximately ten times for both N.O. and N.C. contacts. In both AC and DC operation, the addition of the device will normally double the contact life, due to reduced arcing. Design/Construction AGASTAT control relays are operated by a moving core electromagnet GP/ML Contact Data @ 25°C whose main gap is at the center of the coil. A shoe is fitted to the core which overlaps the yoke and further increases the magnetic attraction. Arrangements: 4 Form C (4PDT) The coil itself is in the form of an elongated cylinder, which provides a Material: Siver plated. low mean turn length and also assists heat dissipation. Since the Ratings: See chart. maximum travel of the electromagnet does not provide optimum contacts Expected Life: Mechanical: 100 million operations. movement, an ingenious amplifying device has been designed. Electrical: See chart and graph. This consists of a W-shaped mechanism, shown in figure 1. When the center of the W is moved vertically the lower extremities move closer to Contact Ratings and Expected Life each other as can be seen in the illustration. The center of the W mecha- Power Factor Number of nism is connected to the moving core of the electromagnet and the two Current or Electrical lower points are connected to the moving contacts. Voltage (Amps) Time Constant Operations Remarks Two of these mechanisms are placed side-by-side to actuate the four 540 VAC 3 COS Ş = 0.5 15,000 2 contacts in series contacts sets of the relay. The outer arms of the W mechanisms are leaf 380 VAC 15 Resistive 10,000 2 contacts in parallel springs, manufactured from a flat piece of non-ferrous metal. These outer arms act as return springs for their corresponding contacts. This provides 380 VAC 10 Resistive 200,000 each contact with its own separate return spring, making the contacts 380 VAC 3 x 3.3 COS Ş = 0.8 200,000 3hp motor independent. 220 VAC 20 Resistive 20,000 2 contacts in parallel The mechanical amplification of the motion of the electromagnet 220 VAC 15 COS Ş = 0.5 20,000 2 contacts in parallel permits a greater distance between the contacts, while the high efficiency 220 VAC 10 Resistive 400,000 of the electromagnet provides a nominal contact force in excess of 100 220 VAC 3 x 6 COS Ş = 0.8 200,000 3hp motor grams on the normally open contacts. 220 VAC 5 1,500,000 Filament lamps All the contacts are positioned well away from the cover and are well ventilated and separated from each other by insulating walls. 220 VAC 5 Resistive 3,000,000 The absence of metal-to-metal friction, the symmetrical design of the 220 VAC 2.5 COS Ş = 0.25 2,000,000 contact arrangement and the lack of heavy impacts provides a mechanical 220 VAC 2 Resistive 15,000,000 life of 100,000,000 operations. 220 VAC 1.25 Resistive 30,000,000 For use in AC circuits, the relay is supplied with a built-in rectification 120 VDC 1.5 Resistive 20,000,000 with blow-out device circuit, thus retaining the high DC efficiency of the electromagnet. The current peak on energizing is also eliminated and consequently the relay 48 VDC 10 Resistive 1,000,000 can operate with a resistance in series (e.g. for high voltages or for drop- out by shorting the coil). The use of the rectification circuit offers still Load Life Curve other advantages. The same model can operated at frequencies ranging from 40 to 400 cycles. Operation of the relay is crisp; even with a low AC voltage, there is a complete absence of hum and vibration. The plastic dust cover has two windows through which the iron yoke protrudes to facilitate cooling and also to allow direct mounting arrangement of the relay irrespective of the terminals. Figure 1 – Illustration of Amplification This diagram illustrates amplification obtained by the articulated operating mechanism. NOTE: Seismic & radiation tested EGP, EML and ETR models are available. Consult factory for detailed information. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 917 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Initial Dielectric Strength Operate Data @ 20°C Between non-connected terminals: 2,000V rms, 60 Hz. Operate Time at Rated Voltage: Between energizing and opening of Between non-connected terminals & relay yoke: 2,000V rms, 60 Hz. normally closed contacts, less than 18 milliseconds on AC and less than 15 milliseconds on DC. Release Time: Between energizing and closing of normally open Initial Insulation Resistance contacts, less than 35 milliseconds on AC and less than 30 milliseconds 9 Between non-connected terminals: 10 ohms at 500VDC. on DC. Between de-energizing and opening of normally open contacts, 9 Between non-connected terminals & relay yoke: 10 ohms at 500VDC. less than 70 milliseconds on AC and less than 8 milliseconds on DC. Between de-energizing and closing of normally closed contacts, less than Coil Data 85 milliseconds on AC and less than 25 milliseconds on DC. Voltage: 24, 120 & 220VAC, 60 Hz. Add series resistor for 380-440VDC; 12, 24, 48, 125 & 250VDC. Environmenal Data Duty Cycle: Continuous. Operating Temperature Range: 0°C to +60°C. Nominal Coil Power: 6VA for AC coils; 6W for DC coils. Vibration: Single axis fragility curve data are available on request at There is no surge current during operation. frequencies from 5 Hz. to 33 Hz. Coil Operating Voltage Shock: The relay, when kept energized by means of one of its own contact sets, will withstand 40g shock load when operating on DC, and DC AC, 50/60Hz 150g shock load on AC. Nominal Coil Voltage 12 24 48 125 250 24 120 220 Minimum Pick-up Voltage at 20°C 9 18 36 94 187 19 92 175 Mechanical Data Minimum Pick-up Mounting Terminals: 16 flat base pins. Screw terminal sockets are Voltage at 40°C 9.5 19 38 100 200 20 102 188 available. Wire Connection: The 16 flat pins are arranged in four symmetrical rows Maximum voltage for of four pins; the pitch in both directions being .394”. Connection may be continuous use 13.5 27 53 143 275 27 137 245 made to the relay by soldering. Sockets are available with screw terminals. For 380VAC – Use 6800 ohms 4 watt resistor in series with 220VAC relay. The internal wiring of the relay is also symmetrical as shown in the For 440VAC – Use 8200 ohms 6 watt resistor in series with 220VAC relay. adjacent figure, allowing the relay to be inserted into the socket in either of two positions. Terminals B2 and B3 are provided as extra connections for Drop-out voltage is between 10% and 40% of the nomninal voltages for both DC special applications. and AC (For example: in a 120 VAC unit, drop-out will occur between 12 and 48 Weight: 10.9 oz. (308g) approximately. volts.) DC relays will function with unfiltered DC from a full-wave bridge rectifier. Ordering Information Typical Part No. ➤ GP I N 1. Basic Series: GP = Non-latching Control Relay ML = Magnetic Latching Control Relay 2. Coil Voltage: A = 12VDC G = 24VAC, 60 Hz. B = 24VDC I = 120VAC, 60 Hz. C = 48VDC J = 220VAC, 60 Hz. D = 125VDC F = 250VDC 3. Options: N = Magnetic Blow-out Device Q = Light to indicate coil energization (GP only. 120VAC, 125VDC, 220VAC and 250VDC voltages only.) R = Internal diode to suppress coil de-energization transient. (GP only. When used on DC unit, relay release time increases to same value as AC unit). Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.. GPD GPDN Outline Dimensions Wiring Diagrams (Bottom Views) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 918 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT TR series 10 Amp Control Relay – Timing Version Load Life Curve TR Features • 8 timing ranges. • 4 SPDT contacts. • Magnetic blowout device option increases DC current carrying ability approximately ten times for both N.O. and N.C. contacts. In both AC and DC operation, the addition of the device will normally double the contact life, due to reduced arcing. TR Design/Construction Couples an advanced electromechanical design with a field-proven solid- state timing network, an adaptation of the circuit used in the AGASTAT premium grade SSC Timer. This unique circuit also eliminates the need for supplementary temperature-compensation components, affording unusual stability over a realistically broad operating temperature range. It also provides transient protection and protection against premature switching of the output contacts due to power interruption during timing. Timing Specifications Operating Mode: On-Delay (Delay on energization). Timing Adjustment: Internal fized or internal potentiometer. Timing Ranges: .15 to 3 sec. 4 to 120 sec. .55 to 15 sec. 10 to 300 sec. 1 to 30 sec. 1 to 30 min. Initial Insulation Resistance 2 to 60 sec. 2 to 60 min. 9 Between non-connected terminals: 10 ohms at 500VDC. Accuracy: 9 Between non-connected terminals & relay yoke: 10 ohms at 500VDC. Repeat: ±2% as fixed temerature and voltage. Overall: ±5% over combined rated extremes of temerature and voltage. Reset Time: 75ms. Coil Data Voltage: 120VAC, 50-60 Hz.; 24 & 125VDC. Contact Data @ 25°C Transient Protection Arrangements: 4 Form C (4PDT) Nominal Rating: 10A @ 120VAC. 1,500 volt transient of less than 100 microseconds, or 1,000 volts or less. Contact Pressure: Between movable and normally closed contacts: 30 g, typical. Environmenal Data Between movable and normally open contacts: 100 g, typical. Expected Life: Mechanical: 100 million operations. Operating Temperature Range: 0°C to +50°C. Electrical: See load/life graph. Mechanical Data Initial Dielectric Strength Mounting Terminals: 16 flat base pins. Screw terminal sockets are available. Between terminals and case and between mutually-isolated Weight: 11 oz. (311g) approximately. contacts: 2,000VAC. Wiring Diagram (Bottom View) Ordering Information Typical Part No. ➤ TR 1 4 B 1 A N 1. Basic Series: TR = Timing control relay 2. Operation: 1 = On-delay 3. Output: 4 = 4PDT (4 form C) 4. Operating Voltage: B = 24VDC D = 215VDC I = 120VAC, 50/60 Hz. 5. Timing Adjustment: 1 = Internal fixed. 3 = Internal potentiometer. 6. Timing Range: A = .15 to 3 sec. C = 1 to 30 sec. E = 4 to 120 sec. I = 2 to 60 min. Outline Dimensions B = .55 to 15 sec. D = 2 to 60 sec. G = 10 to 300 sec. N = 1 to 30 min. Same as GP/MR. See previous page. 7. Options: N = Magnetic blow-out device. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.. None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 919 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Accessories for GP/ML/TR series control relays Front connected sockets Cat. No. CR0001 With captive clamp terminals Cat. No. CR0002 With (#6) binding head screws Cat. No. CR0095 With (#6) screw terminals Cat. No. CR0067 With (#6) screw terminals Hold down (locking) springs Cat. No. CR0069 Cat. No. CR0070 Cat. No. CR0111 For socket: CR0067 For socket: CR0095 For sockets: CR0001& CR0002 Heavy-duty hold down (locking) straps *Cat. No. CR0133 *Cat. No. CR0155 For socket: CR0001 & CR0002 For socket: CR0095 * Catalog number includes strap, strap plate and necessary brackets. Magnetic blowout device Extracting handle Cat. No. CR0190 Cat. No. CR0179 Reduces arcing on the Used to remove GP, ML and TR relay contacts when they units from mounting bases. make or break contact, either upon energizing or de-energizing, resulting in less contact degradation. Extends the life of the contact. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 920 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AUTOMOTIVE RELAYS Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 T72M ................................... Single 20A Relay .......................................... 1005 V23086 ............................. Single or Dual 20A Relay .......................... 1002 V2R ....................................... 20A Motor Reversing Module ................ 1012 VF4 ....................................... 40A Relay ........................................................ 1017 Transformers.............................. 201-212 2 VF7 ....................................... 70A Relay ........................................................ 1021 VFM ...................................... 20A Relay ........................................................ 1014 VKP ....................................... 40A Relay ........................................................ 1007 Low-signal PC Board Relays. 301-336 3 VTF........................................ Flasher Module.............................................. 1024 Mid-Range PC Board Relays ....... 19-21 4 Automotive Relay Question Tree This guide helps the user select one or more relay series which may be appropriate for a given application. The user should then refer to detailed specifications elsewhere in this catalog to determine the actual part number to be specified. Of course, the user must assume Power PC Board Relays ................ 22-35 5 ultimate responsibility for determining the suitability of a relay for a particular application. Contact Switch Rating? Relays with 6 Forcibly-Guided Contacts.............. 36-79 20 amps* 40 amps* 70 amps* Plug-in/Panel Mount 7 Mounting Type? Mounting Type? Mounting Type? General Purpose Relays............701-749 P.C. Board Plug-in / Flange P.C. Board Plug-in / Flange P.C. Board Plug-in / Flange Power Relays & Definite 8 Purpose Contactors...................... 89-131 T72M VFM VKP VF4 VF7 VF7 V23086 VF4 V2R Latching, Impulse & * Typical loads at 14VDC, resistive, for comparison purposes. See catalog pages for a given series for detailed rating specifications. 9 Rotary Relays ...............................149-154 Automotive Relays ..................1001-1026 10 Solid State Relays & 11 Input/Output Modules ................195-207 Time Delay Relays & NOTE: The "automotive" relays described in this section are DC coil 12 Counters ........................................208-232 relays designed to switch 14VDC loads in automobiles. They may also be suitable for non-automotive applications such as electric wheelchairs and other battery powered equipment. They are not UL recognized. Sensors & Monitors ...................233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1001 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS V23086 series 20 Amp Micro K (Single & Dual) PC Board Relay for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • 30A, 16VDC switching rating. Must Operate and Must Release Voltage: See Coil Data table. • 40A inrush at 16VDC. Initial Operate Time: 3 milliseconds, typical, with rated coil voltage • 20A continuous contact rating @ 85°C. applied. • Immersion cleanable plastic case with knock-off nib for ventilation. Initial Release Time: 1.5 milliseconds, typical, with zero volts applied (for • 60% less volume than other comparable power relays. unsuppressed relays after having been energized at • 1 Form A and 1 Form C arrangements in single and dual relay packages. rated coil voltage.) • Choice of AgNi 0.15 or AgSnO contacts. Conditions All parametric, environmental and life tests are performed according to Environmental Data EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH, 29.5 ± 1.0" Hg.) unless otherwise noted. Temperature Range: Storage: -40°C to +155°C. Operating: -40°C to +105°C. Shock: 20g, 11 milliseconds, half sine wave pulse. Contact Data Vibration: (For NC contacts, NO contacts are significantly higher.) Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT) in single relay 10-40 Hz., 1.27mm double amplitude. and dual relay configurations. 40-70 Hz., 5g's constant. Material: AgNi 0.15 - Recommended for inductive loads. 70-100 Hz., 0.5mm double amplitude. AgSnO - Recommended for high inrush, lamp and capacitive 100-500 Hz., 10g's constant. loads and applications prone to contact material transfer. Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Max. Load Current (@ 14VDC Load Voltage): Mechanical Data Load Form A Form C (NO) Termination: Printed circuit terminals. NO NC Enclosure: Immersion cleanable, sealed plastic cover. Max. Continuous Current 30A 30A 25A Weight:Sealed: 4 gm (0.14 oz.) approximately. Max. Break Current 30A 30A 25A Max. Make Current AgSnO 100A 100A 15A AgNi 0.15 40A 40A 10A Abnormal Operation Max. Switching Power: 35-320 watts DC (voltage dependent). Min. Recommended Current: 0.5 amp @ 12VDC. (2) Overload Current: 50A, 5 sec. Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts 87.5A, 0.5 sec. @ 10 amp contact load. 150A, 0.1 sec. 250 millivolts, maximum, for normally closed contacts 24V Jump Start: 24VDC for 5 minutes conducting rated contact current @ 5 amp contact load. @ 23°C. Expected Life: 10 million operations, mechanical; 100,000 operations at 20 Drop Test: Capable of meeting specifications after a 1.0 meter drop amps, 14VDC, resistive load on normally open contact. onto concrete in final enclosure. Flammability: UL94-HB or better (meets FMVSS 302). Initial Dielectric Strength Between Contacts and Coil: 500V rms. Notes Coil Data (1) Allowable overdrive is rated at ambient temperature of 23°C and 105°C Voltage: 12 VDC. as stated with no load current flowing through the relay contacts and Resistance: See Coil Data table. minimum coil resistance with power applied for 30 sec. max. (20% Nom. Power: 0.55 watts @ 23°C coil temp. and rated coil voltage. max. duty cycle.) Thermal Resistance: 50°C per actual coil watt in still air with no contact (2) Current and times are compatible with circuit protection by a typical 25A load current. fuse. Relay will make, carry and break the specified current. Coil Data (@ 23°C Coil Temperature) (1) Coil Rated Coil Coil Must-Operate Must-Release Allowable Designator Voltage Resistance Voltage Voltage Overdrive (VDC) ±10% (Ohms) (VDC) (VDC) (VDC) @ 23°C @ 105°C 001 12 254 6.9 1.5 27.2 16.5 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1002 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 - Operating Voltage Range 35 30 25 V max. Does not take into account the temperature rise due 20 to the contact current. V op = Operation Voltage 15 E = Pre-Generation V op (E = 13.5V) 10 5 V op (E = 0V) V rel. 0 60 80 100 120 -40 -20 020 40 Ambient T emperature (°C) Ordering Information Contact Contact Part Number Arrangement Enclosure Materials V23086-C1001-A303 1 Form C Sealed, Plastic Cover AgNi 0.15 V23086-C1001-A402 1 Form A Sealed, Plastic Cover AgSnO V23086-C1001-A403 1 Form C Sealed, Plastic Cover AgSnO V23086-C2001-A303 Dual Form C Sealed, Plastic Cover AgNi 0.15 V23086-C2001-A403 Dual Form C Sealed, Plastic Cover AgSnO Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. V23086-C1001-A303 V23086-C1001-A403 Outline Dimensions – Single Relay Wiring Diagrams – Single Relay (Bottom Views) 1 Form A 1 Form C Knock-off-nib 4 4 3 The Knock-off-nib may be removed after soldering 1 1 5 5 and washing (for ventilation) 2 2 .024 ± .008 (0.6 ± 0.2) .228 ± .004 (5.8 ± 0.1) Suggested PC Board Layout – Single Relay (Bottom View) .037 ± .008 .472 ±.004 (0.95 ± 0.2) (12 ± 0.1) .315 ± .004 Assembly and .098 ± .008 (8 ± 0.1) positioning aid .508 ± .008 (2.5 ± 0.2) (12.9 ± 0.2) ş .071 ± .002 .276 ± .004 .087 (1.8 ± 0.05) (7 ± 0.1) .301 ± .004 .390 ± .004 (2.2) (7.65 ± 0.1) (9.9 ± 0.1) .053 3 (1.35) .118 ± .002 4 5 (3 ± 0.05) 1 .283 ± .008 .016 ± .004 (7.2 ± 0.2) .110 ±. 008* (0.4 ± 0.1) 2 (2.8 ± 0.2) Terminals tinned ş .067 ± .002 *excluding solder (1.7 ± 0.05) .024 ± .004 (0.6 ± 0.1) .020 ± .008 (0.5 ± 0.2) ş .043 ± .002 (1.1 ± 0.05) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1003 specified. Refer to inside back cover. Coil Voltage (VDC) .315 ± .004 (8 ± 0.1) .756 ± .012 (19.2 ± 0.3) Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Outline Dimensions – Dual Relay Knock-off-nibs The knock-off-nibs may be removed after soldering and washing (for ventilation) .024 ± .008 (0.6 ± 0.2) .925 ± .008 .037 ± .008 (23.5 ± 0.2) (0.95 ± 0.2) .508 ± .008 .098 ± .008 (12.9 ± 0.2) (2.5 ± 0.2) .301 ± .004 .390 ± .004 (7.65 ± 0.1) (9.9 ± 0.1) .016 ± .004 .110 ± .008* (0.4 ± 0.1) (2.8 ± 0.2) * Terminals tinned Excluding solder 6 x ş .047 ± .002 .315 ± .004 (1.2 ± 0.05) (8 ± 0.1) .276 ± .004 .020 ± .008 (7 ± 0.1) .087 (0.5 ± 0.2) (2.2) .053 .024 ± .004 34 (1.35) .118 ± .002 (0.6 ± 0.1) (3 ± 0.05) 5 1 .283 ± .008 .118 ± .002 (7.2 ± 0.2) 4 x .020 + .002 2 (3 ± 0.05) (0.5 + 0.05) .087 .024 ± .004 (2.2) .020 ± .008 (0.6 ± 0.1) (0.5 ± 0.2) .276 ± .004 (7 ± 0.1) Wiring Diagrams - Dual Relay (Bottom Views) Suggested PC Board Mtg. Holes – Dual Relay (Bottom View) 1 Form A 1 Form C See bottom view of relay (above) for hole-to-hole spacing 4 4 3 ş .071 ± .002 1 1 5 ş .043 ± .002 5 (1.8 ± 0.05) (1.1 ± 0.05) 2 2 3 4 ş .067 ± .002 5 1 (1.7 ± 0.05) ş .067 ± .002 2 (1.7 ± 0.05) ş .043 ± .002 (1.1 ± 0.05) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1004 specified. Refer to inside back cover. 3 4 5 1 4 2 4 3 1 1 5 5 2 2 4 3 5 1 2 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS T72M series 20 Amp Miniature PC Board Relay for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • 20A, 16VDC switching rating. Must Operate and Must Release Voltage: See Coil Data table. • 60A inrush at 16VDC. Initial Operate Time: 5 milliseconds, typical, with rated coil voltage • 15A continuous contact rating @ 105°C. applied. • Immersion cleanable plastic case with knock-off nib for ventilation. Initial Release Time: 2 milliseconds, typical, with zero volts applied (for • Low profile package has a seated height of only .67‘’ (17mm). unsuppressed relays after having been energized at • 1 Form C arrangement. rated coil voltage.) • Choice of AgNi 0.15 or AgSnO contacts. Conditions Environmental Data All parametric, environmental and life tests are performed according to Temperature Range: Storage: -40°C to +155°C. (4) EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% Operating: -40°C to +105°C . RH, 29.5 ± 1.0" Hg.) unless otherwise noted. Shock: 20g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5g's constant. Contact Data 70-100 Hz., 0.5mm double amplitude. Arrangements: 1 Form C (SPDT). 100-500 Hz., 10g's constant. Material: AgNi 0.15 - Recommended for inductive loads. AgSnO - Recommended for high inrush, lamp and capacitive loads and applications prone to contact material transfer. Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Mechanical Data (1) Max. Switching Voltage: 75VDC . Termination: Printed circuit terminals. Max. Load Current (@ 14VDC Load Voltage): Enclosure: Immersion cleanable, sealed plastic cover. Load Form C Weight:Sealed: 12 gm (0.4 oz.) approximately. Audible Sound: 95dBA @ 10 cm, 14VDC coil voltage. NO NC 77dBA @ 1 M, 14VDC coil voltage. Max. Continuous Current 20A 10A (1) Max. Break Current 20A 20A (2) Max. Make Current AgNi 0.15 60A 12A Abnormal Operation AgSnO 80A 15A (5) Overload Current: 40A, 36 sec. (1) 80A, 10 sec. Max. Switching Power: 35-320 watts DC (voltage dependent) . 150A, 2.5 sec. Min. Recommended Current: 0.5 amp @ 12VDC. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts @ 23°C. @ 10 amp contact load. Drop Test: Capable of meeting specifications after a 1.0 meter drop 250 millivolts, maximum, for normally closed contacts onto concrete in final enclosure. @ 5 amp contact load. Flammability: UL94-HB or better (meets FMVSS 302). Expected Life: 10 million operations, mechanical; 100,000 operations at 20 amps, 14VDC, resistive load on normally open contact. Notes Initial Dielectric Strength (1) See Figure 1. Between Contacts and Coil: 500V rms. (2) Inrush current for lamp load. (3) Allowable overdrive is rated at ambient temperature of 23°C and 105°C as stated with a 10A load current flowing through the relay contacts and Coil Data minimum coil resistance with power applied for 30 sec. max. (20% max. Voltage: 12 and 24VDC. duty cycle.) For continuous duty information, see Figure 2. (Ambient Resistance: See Coil Data table. Termerature vs. Coil Voltage for Continuous Duty.) Nom. Power: 0.80 watts @ 23°C coil temp. and rated coil voltage. (4) See Figure 2. Thermal Resistance: 50°C per actual coil watt in still air with no contact (5) Current and times are compatible with circuit protection by a typical 20A load current. circuit breaker. Relay will make, carry and break the specified current. Coil Data (@23°C Coil Temperature) (3) Coil Rated Coil Coil Coil Must-Operate Must-Release Allowable Designator Voltage Resistance Inductance Voltage Voltage Overdrive (VDC) ±10% (Ohms) (H) (VDC) (VDC) (VDC) (Ref.) @ 23°C @ 105°C 12 12 180 0.9 6.3 1.2 24.6 14.3 24 24 720 3.2 12.6 2.4 49.3 28.7 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1005 specified. Refer to inside back cover. 320W 250W 200W 100W 40W Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 - Limiting Curve for Power Load 75 Safe breaking, arc extinguished (normally open contact) for resistive loads. 60 50 40 30 20 10 0.5 1 2345 7 10 12 20 Switching Current (Amps) Figure 2 - Ambient Temperature vs. Coil Voltage for Continuous Duty Assumptions: 140 1. Thermal resistance = 50°C per watt 120 2. Still air 100 3. Nominal coil resistance 80 4. Maximum mean coil temperature = 155°C 60 5. Coil temperature rise due to load 0 Amp Contact Load 40 10 Amp Contact Load = 8°C @ 10 amps 20 15 Amp Contact Load = 20°C @ 15 amps 20 Amp Contact Load 0 = 35.5°C @ 20 amps 80 90 100 110 120 130 140 150 160 170 180 190 200 6. Curves are based on 800mW at 23°C Applied Coil Voltage (% of Rated Nominal) 7. When full lifetime is at high ambient and high load current, subtract 25°C from maximum allowable ambient temperature. Ordering Information Contact Contact Part Number Arrangement Enclosure Materials T72M5D121-* 1 Form C Sealed, Plastic Cover AgNi 0. T72M5D155-* 1 Form C Sealed, Plastic Cover AgSnO *Standard Coil Voltages: 12 = 12VDC 24 = 24VDC (Consult factory for availability). Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) Tolerance (unless otherwise noted): 3 decimal: ± .010 (±.254); 2 decimal: ±.015 (±.381). Code 5 1 Form C .89 MAX. 5 (22.5) 4 1 .10 MIN. .67 MAX. (2.5) (17.0) SOLDER 3 2 .03 MAX. .140 ± .020 (.76) (3.5 ± .51) Suggested PC Board Layout (Bottom View) .040 DIA. (1.02) .65 MAX. .480 .079 .052 DIA. TYP. (16.5) (12.2) (2.0) (1.3) .081 .472 4 PLACES (2.06) (12.0) .020 x .045 MAX. (.51 x 1.14) .236 (6.0) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com 1006 reference purposes only. (millimeters) unless otherwise subject to change. Technical support: specified. Refer to inside back cover. Maximum Allowable Switching Voltage (VDC) Ambient Temperature (°C) Catalog 1308242 Issued 3-03 TYCO ELECTRONICS VKP series Compact, 40 Amp, Open or Sealed PC Board Relay For Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • 40A continuous contact rating @ 85°C. Must Operate and Must Release Voltage: See Coil Data table. • 1 Form A and 1 Form C arrangements. Initial Operate Time:5 milliseconds, typical, with rated coil voltage applied. • PC board terminals. Initial Release Time: 3 milliseconds, typical, with zero volts applied (for • Available as open frame or sealed relay. unsuppressed relays after having been energized at • Choice of AgNi 0.15 or AgSnO contacts. rated coil voltage). Conditions Environmental Data All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH, Temperature Range: Storage: -40°C to +155°C. 29.5 ± 1.0" Hg.) unless otherwise noted. (4) Operating: -40°C to +125°C . Shock: 20g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) Contact Data 10-40 Hz., 1.27mm double amplitude. Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). 40-70 Hz., 5g's constant. Material: AgNi 0.15 – Recommended for inductive loads. 70-100 Hz., 0.5mm double amplitude. AgSnO – Recommended for high inrush, lamp and capacitive loads 100-500 Hz., 10g's constant. and applications prone to contact material transfer. Max. Switching Rate:20 operations per second with no contact load. 6 operations per minute for rated life at rated load. (1) Max. Switching Voltage: 75VDC . Mechanical Data Max. Load Current (@ 14VDC Load Voltage): Termination: Printed circuit terminals. Load Form A Form C Enclosure: Sealed relay is suitable for immersion cleaning of PCB (NO) NO NC assembly or conformal coating. Relay may be vented after cleaning by cutting the vent projection from the corner of the Max. Continuous Open Frame 45A 45A 30A relay after processing using a razor knife or equivalent. Current Sealed Cover 45A 45A 30A Weight: 20g (0.7 oz.) approximately. (1) Max. Break Current 60A 60A 30A (2) Max. Make Current AgNi 0.15 100A 100A 30A Abnormal Operation AgSnO 180A 180A 30A Overload Current: Consult factory. (1) Max. Switching Power: 50-500 watts DC (voltage dependent) . 24V Jump Start: 24VDC for 5 minutes conducting rated contact Min. Recommended Current: 1 amp @ 12VDC. current @ 23°C. Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts Drop Test: Capable of meeting specifications after a 1.0 meter drop onto @ 40 amp contact load. concrete in final enclosure. 250 millivolts, maximum, for normally closed contacts Flammability: UL94-HB or better, internal parts (meets FMVSS 302). @ 20 amp contact load. Expected Life: 10 million operations, mechanical; 100,000 operations at 40 amps, 14VDC, resistive load on normally open contact. Notes Initial Dielectric Strength (1) See Figure 1. (2) Inrush current for lamp load. Between Contacts and Coil: 500V rms. (3) Allowable overdrive is rated at ambient temperature for 23°C or 85°C as stated with no load current flowing through the relay contacts and Coil Data minimum coil resistance. Also see Figure 2 for maximum ambient Voltage: 12 and 24VDC. temperature versus applied coil voltage. Resistance: See Coil Data table. (4) See Figure 2. Nom. Power: 1.6 watts @ 23°C coil temp. and rated coil voltage. (5) Current and times are compatible with circuit protection by a typical Thermal Resistance: 45°C per actual coil watt in still air with no contact automotive circuit breaker. Relay will make, carry and break the load current. specified current. Coil Data (@ 23°C Coil Temperature) (3) Coil Rated Coil Coil Coil Must-Operate Must-Release Allowable Designator Voltage Resistance Inductance Voltage Voltage Overdrive (VDC) ±10% (Ohms) (H) (Ref.) (VDC) (VDC) (VDC) @ 23°C @ 85°C F 12 90 0.6 6.8 1.2 19.6 14.3 H 24 362 2.3 13.9 2.4 39.3 28.6 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1007 specified. Refer to inside back cover. 500W 50W 200W Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 – Limiting Curve for Power Load 75 Safe breaking, arc extinguished (normally open contact) for resistive loads. 60 50 40 30 20 12 10 7 0.5 1 2 3 45 10 20 30 40 Switching Current (Amps) Figure 2 – Ambient Temperature vs. Coil Voltage for Continuous Duty 130 Assumptions: 1. Thermal resistance = 40°C per watt. 120 2. Still air. 3. Nominal coil resistance. 110 4. Maximum mean coil temperature = 180°C. 5. Coil temperature rise due to load. 100 = 3.5°C @ 8 amps. = 10°C @ 16 amps. = 20°C @ 24 amps. 90 0 Amp Contact Load 8 Amp Contact Load = 36°C @ 32 amps. = 55°C @ 40 amps. 80 16 Amp Contact Load 6. Thermal resistance and power dissipation based on coil resistance at 180°C. 70 24 Amp Contact Load 7. Curves are based on 1.6 watts at 23°C. 8. When full lifetime is at high ambient and high 60 load current, subtract 25°C from maximum 32 Amp Contact Load allowable ambient temperature. 50 9. Data is for open relays. 10. Subtract 10°C from the maximum allowable 40 ambient temperature for sealed version. 40 Amp Contact Load 30 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Ordering Information Contact Contact Part Number Arrangement Material Enclosure Termination Footprint VKP-11 * 42 1 Form A AgNi 0.15 Open U.S.A. VKP-15 * 42 1 Form C AgNi 0.15 Open U.S.A. VKP-11 *52 1 Form A AgSnO Open U.S.A. VKP-15 *52 1 Form C AgSnO Open U.S.A. VKP-31 *42 1 Form A AgNi 0.15 Immersion Cleanable Case U.S.A. VKP-35 * 42 1 Form C AgNi 0.15 Immersion Cleanable Case U.S.A. VKP-31 * 52 1 Form A AgSnO Immersion Cleanable Case U.S.A. VKP-35 * 52 1 Form C AgSnO Immersion Cleanable Case U.S.A. *Standard Coil Voltages: F = 12VDC H = 24VDC (Consult factory for availability) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Note: See page 1011 for Wiring Diagrams, Suggested PC Board Layouts and Outline Dimensions. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com 1008 reference purposes only. (millimeters) unless otherwise subject to change. Technical support: specified. Refer to inside back cover. Maximum Allowable Ambient Temperature (°C) Switchng Voltage (VDC) Catalog 1308242 Issued 3-03 TYCO ELECTRONICS New Relay for VKP series Flashing Lamp Applications PC Board Relay Features Coil Data • 30A flashing lamp rating up to 85°C. Voltage: 12 and 24VDC. • Long life for flashing lamp load applications. Resistance: See Coil Data table. • 1 Form A and 1 Form C arrangements. Nom. Power: 1.6 watts @ 23°C coil temp. and rated coil voltage. • Available as open frame or sealed relay. Thermal Resistance: 45°C per actual coil watt in stil air with no contact • Choice of standard or high current model. load current. Operate Data Conditions Must Operate and Must Release Voltage: See Coil Data table. All parametric, environmental and life tests are performed accourding to EIA Initial Operate Time:5 milliseconds, typical, with rated coil voltage applied. Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH, Initial Release Time: 3 milliseconds, typical, with zero volts applied (for 29.5 ± 1.0” Hg.) unless otherwise noted. unsuppressed relays after having been energized at rated coil voltage). Contact Data Environmental Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Temperature Range: Storage: Material: PdCu/AgNi 0.15. Open Types: -40°C to +155°C. Max. Switching Rate: 20 operations per second with no contact load. Sealed Types: -40°C to +125°C. 90 operations per minute for rated life at rated load. (4) Operating: -40°C to125°C . 270 operations per minute for passenger car lamp Shock: 20g, 11 milliseconds, half sine wave pulse. outage indication. Vibration: (For NC contacts, NO contacts are significantly higher.) Max. Switching Voltage: 28VDC. 10-40 Hz., 1.27mm double amplitude. Max. Load Current (@ 14VDC Load Voltage): 40-70 Hz., 5g’s constant. 70-100 Hz., 0.5mm double amplitude. Standard Current Types 100-500 Hz., 10g’s constant. Load Form A Form C (NO) NO NC Mechancial Data Steady-State Open Frame 15A 15A 5A (1) Flashing Sealed Cover 12A 12A 5A Termination: Printed circuit terminals. (U.S.A. footprint style only) Enclosure: Sealed relay is suitable for immersion cleaning of PCB assembly Alternate Open Frame -4A 4A or conformal coating. Relay may be vented cutting the vent (2) Flashing Sealed Cover -4A 4A projection from the corner of the relay after processing using (3) Max. Make Current 120A 120A 30A razor knife or equivalent. Max. Break Current 20A 20A 10A Weight: 20g (0.7 oz.) approximately. High Current Types Load Form A Form C Abnormal Operation (NO) NO NC Overload Current: Consult factory. 24V Jump Start: 24VDC for 5 minutes conducting rated contact Steady-State Open Frame 30A 30A 10A current @ 23°C. Flashing Sealed Cover 25A 25A 10A Drop Test: Capable of meeting specifications after a 1.0 meter drop onto Alternate Open Frame -8A 8A concrete in final enclosure. Flashing Sealed Cover -8A 8A Flammability: UL94-HB or better (meets FMVSS 302). (3) Max. Make Current 240A 240A 60A Max. Break Current 30A 30A 20A Notes (1) Continuous On-Off cycling of a single set of lamps at 60 to 90 cycles Min Recommended Current: 1 amp @ 12VDC. per minute and approximately a 50% duty cycle. Initial Voltage Drop: 100 millivolts, maximum, for normally open (2) Continuous cycling between two sets of lamps with one set switched contacts @ 10A contact load. by the N.O. contacts and the other by the N.C. contacts, at 60 to 90 200 millivolts, maximum, for normally closed cycles per minute and aproximately a 50% duty cycle. contacts @ 10A contact load. (3) Inrush current for lamp load. Expected Life: Mechanical Life: 10 million operations. (4) Allowable overdrive is rated at ambient temperature for 23°C or 85°C Electrical Life: (See application information.) as stated with no load current flowing through the relay contacts and minimum coil resistance. Also see Figure 2 for maximum ambient temperature versus applied coil voltage. (5) Current and times are compatible with circuit protection by a typical Electrical Isolation automotive circuit breaker. Relay will make, carry and break the Dielectric Strength (coil to contacts): 500 Vrms. specified current. Coil Data (@ 23°C Coil Temperature) (4) Coil Rated Coil Coil Coil Must-Operate Must-Release Allowable Designator Voltage Resistance Inductance Voltage Voltage Overdrive (VDC) ±10% (Ohms) (H) (Ref.) (VDC) (VDC) (VDC) @ 23°C @ 85°C F 12 90 0.6 6.8 1.2 19.6 14.3 H 24 362 2.3 13.9 2.4 39.3 28.6 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1009 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Application Information Electrical Life Test Information Load Polarity: VKP series relays for flashing lamp applications are Standard Current Relays: 3 bulb T/S (turn signal) system, combined turn constructed with Palladium-Copper movable contacts and fine grain silver signal and hazard warning with normal trailering (test requirements): stationary contacts. This causes the relay to be sensitive to the polarity of 3 bulb 1.8 million operations the load voltage. This type of VKP relay must be mechanized in the circuit 4 bulb 130 K operations such that the more positive connection is made to the movable contact 6 bulb 194 K operations (identified as terminal 4 in the wiring diagrams). Failure to do so will nullify 8 bulb 248 K operations the benefit of the Palladium Copper and will result in contact welding. TOTAL 2.3 million operations This application represent about the limit of the performance capability of Typical Applications: VKP series relays for flashing lamp applications are the “standard current” types and is generally the limit of the industry typically used for turn signal, hazard warning, emergency vehicle, and requirement for passenger car applications. security system applications. They may also be used for high in-rush Note: Bulb as used here is a 27 watt turn signal bulb, trade #1156. Testing includes operations current capacitive loads such as audio amplifiers. Use on inductive loads or at -40°C, 23°C, and 85°C. loads with high continuous load currents should be avoided. The relay should also not be used for applications which do not have a significant High Current Relays: 3 bulb T/S system, combined turn signal and hazard make current as high contact voltage drop may result. warning with special trailering (test requirements): 3 bulb 2.1 million operations Standard Current Relays: VKP series relays for flashing lamp applications 6 bulb 194 K operations which are indicated as “standard current” units are generally suitable for 7 bulb 259 K operations passenger car and light truck applications for turn signal, hazard warning, or 14 bulb 497 K operations combination flashers (with or without normal trailering requirements) for 2 TOTAL 3.0 million operations or 3 bulb turn signal systems. They are also generally suitable for security This application represent about the limit of the performance capability of system applications for lamp flashing and for most audio amplifier the “high current” types. It should be noted that the low current operations applications. have very little affect on the total product life where as the 14 bulb (33 ampere) operations are extremely destructive. Units test on 14 bulb (only) High Current Relays: VKP series relays for flashing lamp applications loads can be expected to fail at less than 1 million operations. which are designated as “high current” have larger contacts, a larger shunt Note: Bulb as used here is a 27 watt turn signal bulb, trade #1156. Testing includes operations connecting the movable contacts to the output terminals, and other at -40°C, 23°C, and 85°C. performance enhancing characteristics to provide longer life and provide higher current carrying capacity. This type relay should be used for truck Design Considerations: It should be noted that although the VKP series applications which have greater load current and in applications such as relays are capable of handling relatively high currents, when applying the emergency vehicle lighting and service vehicle hazard warning lights which product under high current and high ambient temperature conditions, have very high cycle life requirements . The high current versions are also providing adequate conductor volume is critical, as is the solder recommended for most alternating flasher applications, as this version has connection, particularly with respect to the normally open contact terminal. much improved performance of the normally closed contact. However, It may be necessary to use high temperature solder, a plated through hole optimum life can be obtained for alternating applications by using two PCB, or a copper lead frame type construction under these conditions to normally open relays and powering the coils alternately. prevent failure of the solder joint. Figure 2 – Ambient Temperature vs. Coil Voltage for Continuous Flashing at 50% Duty Cycle (Steady Current, Open Style) Consult factory. Ordering Information Contact Contact Part Number Arrangement Material Enclosure Load Ratings VKP-11 * 32 1 Form A PdCu/AgNi 0.15 Open Standard Current VKP-11 * 62 1 Form A PdCu/AgNi 0.15 Open High Current VKP-15 * 62 1 Form C PdCu/AgNi 0.15 Open High Current VKP-31 * 32 1 Form A PdCu/AgNi 0.15 Immersion Cleanable Case Standard Current VKP-31 * 62 1 Form A PdCu/AgNi 0.15 Immersion Cleanable Case High Current VKP-35 * 62 1 Form C PdCu/AgNi 0.15 Immersion Cleanable Case High Current *Standard Coil Voltages: F = 12VDC H = 24VDC (Consult factory for availability) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com 1010 reference purposes only. (millimeters) unless otherwise subject to change. Technical support: specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Outline Dimensions Open Model Sealed Model .911 MAX. 1.04 MAX. .866 MAX. .748 MAX. (23.1) (26.5) (22.0) (19.0) .715 MAX. (18.2) .878 MAX. (22.3) .150 MAX. .150 MAX. (3.8) (3.81) EXCLUDING SOLDER Wiring Diagrams (Bottom Views) Open Models Sealed Models 1 Form A 1 Form C 1 Form A 1 Form C 3 3 4 4 5 5 12 5 5 12 12 12 4 4 4 4 4 4 4 4 Suggested PC Board Layouts (Bottom Views) Open Model Sealed Model Hole Size Hole Size .055 DIA. .083 .055 DIA. .083 (1.4) (2.1) (2.1) (1.4) 2 PLACES 2 PLACES .062 (1.6) 3 3 4 .043 .043 5 12 5 12 .086 (1.1) (1.1) (2.2) 2 PLACES 2 PLACES 4 4 4 4 .086 .086 .062 .062 (2.2) (2.2) (1.6) (1.6) 2 PLACES 2 PLACES 2 PLACES 2 PLACES Center-To-Center Center-To-Center .586 (14.88) .211 .211 (5.35) .134 (5.35) .19 MAX. (3.4) (4.8) .148 .289 MAX. .147 .148 (3.75) (7.3) (3.73) (3.75) .213 3 3 4 (5.4) 5 5 1 2 1 .147 2 .467 .467 .092 (3.73) (11.87) (11.87) (2.33) 4 4 4 4 .161 .161 (4.08) (4.08) .483 .483 (12.28) (12.28) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1011 specified. Refer to inside back cover. X Catalog 1308242 Issued 3-03 TYCO ELECTRONICS V2R series 20 Amp DC Motor Reversing PC Board Relay for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • 20A, 16VDC switching rating. Must Operate and Must Release Voltage: See Coil Data table. • 75A inrush at 16VDC. Initial Operate Time: 5 milliseconds, typical, with rated coil voltage • 20A continuous contact rating @ 85°C. applied. • Operation to 105°C ambient. Initial Release Time: 2 milliseconds, typical, with zero volts applied (for • Immersion cleanable plastic case with knock-off nib for ventilation. unsuppressed relays after having been energized at • Low profile package has a seated height of only .67” (17 mm). rated coil voltage.) • H-Bridge motor reversing arrangement. Environmental Data Conditions Temperature Range: Storage: -40°C to +155°C. All parametric, environmental and life tests are performed according to EIA (2) Operating: -40°C to +105°C. Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH, Shock: 20g, 11 milliseconds, half sine wave pulse. 29.5 ± 1.0” Hg.) unless otherwise noted. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5g's constant. 70-100 Hz., 0.5mm double amplitude. Contact Data 100-500 Hz., 10g's constant. Arrangements: 2 x 1 Form C (H-Bridge). Material: AgNi 0.15 (consult factory for other contact materials). Max. Switching Rate: 20 operations per second with no contact load. 6 operations per minute for rated life at rated load. Mechanical Data Max. Switching Voltage: 24VDC. Max. Load Current 23°C (@ 14VDC Load Voltage): Termination: Printed circuit terminals. Enclosure: Immersion cleanable, sealed plastic cover. Continuous Carry: 20 Amperes Intermittent Carry: 40 Amperes for 30 seconds. Weight:Sealed: 25 gm (0.9 oz.) approximately. Audible Sound: 95dBA @ 10 cm, 14VDC coil voltage. Make: 75 Amperes Break: 40 Amperes 77dBA @ 1 M, 14VDC coil voltage. (1) Max. Switching Power: 320 watts DC (voltage dependent) Min. Recommended Current: 0.5 amp @ 12VDC. Initial Voltage Drop: 400 millivolts, maximum (measured between load terminals) @ 10 amp contact load. Abnormal Operation Nominal Circuit Resistance: 6 milliohms load terminal to load terminal (3) Overload Current: 40A, 36 sec. @ 10 amp (this value is provided for circuit 80A, 10 sec. design purposes only and is not a 150A, 2.5 sec. specified parameter). 24V Jump Start: 24VDC for 5 minutes conducting rated contact current Expected Life: @ 23°C. Mechanical: 10 million operations. Drop Test: Capable of meeting specifications after a 1.0 meter drop onto Electrical: 20A, 14VDC, 1mH > 100K operations. concrete in final enclosure. 40A, 14VDC, 0.5mH > 10K operations. Flammability: UL94V-0 (meets FMVSS 302). Initial Insulation Resistance @ 500VDC Notes Between Contacts and Coil: 10 megaohms. (1) See Figure 1. Between Open Contacts: 10 megaohms. (2) See Figure 2. (3) Current and times are compatable with circuit protection by a typical 20A circuit breaker. Relay will make, carry and break the specified Coil Data current. (4) Allowable overdrive is rated at ambient temperature of 23°C and Voltage: 12VDC. 105°C, as stated, with a 10A load current flowing throuth the relay Resistance: See Coil Data table. contacts and minimum coil resistance with power applied for 30 sec. Nom. Power: See Coil Data table. max. (20% max. duty cycle). For continuous duty information, see Thermal Resistance: 55°C per actual coil watt in still air with no contact Figure 2 (AmbientTemperature vs. Coil Voltage for Continuous Duty.) load current. Coil Data (@ 23°C Coil Temperature) (4) Relay Rated Coil Coil Coil Must-Operate Must-Release Nominal Allowable Part Voltage Resistance Inductance Voltage Voltage Power Overdrive Number (VDC) ±10% (Ohms) (H) (Ref.) (VDC) (VDC) (Watts) (VDC) @ 23°C @ 105°C V2R-1001 12 150 0.7 6.0 0.9 0.93 24V 16V Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1012 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 - Limiting Curve for Power Load At present, these data are still to be determined. Figure 2 - Ambient Temperature vs. Coil Voltage for Continuous Duty Assumptions: 130 1. Thermal resistance = 55°C per watt 120 2. Still air 3. Nominal coil resistance (150Ω) 4. Maximum mean coil temperature = 180°C 110 0 Amp Contact Load 5. Coil temperature rise due to load = 3°C @ 4 amps 4 Amp Contact Load = 9°C @ 8 amps 100 8 Amp Contact Load = 19°C @ 12 amps = 31°C @ 16 amps 90 12 Amp Contact Load = 51°C @ 20 amps 6. Thermal resistance and power dissipation based on 80 coil resistance at 180°C 16 Amp Contact Load 7. Curves are based on 0.96 watts at 23°C 70 8. When full lifetime is at high ambient and high load current, subtract 25°C from maximum allowable 60 ambient temperature. 20 Amp Contact Load 50 40 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Ordering Information Typical Application Schematic Part Coil Number Resistance V2R-1001 150Ω +12VDC +12VDC +12VDC MOTOR COIL B COIL A Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Outline Dimensions Wiring Diagram (Bottom View) Tolerance (unless otherwise noted): 3 decimal: ± .010 (±.254); 2 decimal: ±.015 (±.381). 2 x 1 Form C (H-Bridge) 2 3 6 1.46 MAX. .650 MAX. (37.1) (16.5) 1 7 .67 MAX. 5 4 8 (17.0) .030 MAX. Suggested PC Board Layout (0.8) .140 (3.6) .052 DIA. TYP. .236 (1.3) .236 (6.0) .480 .079 (6.0) .472 (12.2) (2.0) (12.0) .079 .632 .480 .079 (2.0) (16.1) (12.2) (2.0) .079 .632 .236 (2.0) (16.1) (6.0) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1013 specified. Refer to inside back cover. Maximum Allowable Ambient Temperature (°C) Catalog 1308242 Issued 3-03 TYCO ELECTRONICS VFM series 20 Amp Relay With Quick Connect Terminals for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • 20A continuous contact rating @ 85°C. Must Operate and Must Release Voltage: See Coil Data table. • 1 Form A and 1 Form C arrangements. Initial Operate Time: 4 milliseconds, typical, with rated coil voltage • Plug-in terminals. applied. • Plastic enclosure. Initial Release Time: 1.5 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage). Conditions All parametric, environmental and life tests are performed according to EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH, Environmental Data 29.5 ± 1.0" Hg.) unless otherwise noted. Temperature Range: Storage: -40°C to +155°C. (4) Operating: -40°C to + 125° . Shock: 10g, 11 milliseconds, half sine wave pulse. Contact Data Vibration: (For NC contacts, NO contacts are significantly higher.) Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). 10-40 Hz., 1.27mm double amplitude. Material: AgNi 0.15 and AgSnO (consult factory for other contact materials). 40-70 Hz., 5g's constant. Max. Switching Rate: 20 operations per second with no contact load. 70-100 Hz., 0.5mm double amplitude. 6 operations per minute for rated life at rated load. 100-500 Hz., 10g's constant. (1) Max. Switching Voltage: 75VDC . Max. Load Current (@ 14VDC Load Voltage): Mechanical Data Load Form A Form C Termination: Quick connect. (NO) NO NC Enclosure: Plastic dust cover. Max. Continuous Current 20A 20A 10A Weight: With QC terminals: 20g (0.7 oz.) approximately. (2) (2) Max. Make Current 120A 120A 40A (1) Max. Break Current 30A 30A 15A Abnormal Operation (1) Max. Switching Power: 35-250 watts DC (voltage dependent . (5) Overload Current: 40A, 36 sec. Min. Recommended Current: 1.0 amp @ 12VDC. 80A, 10 sec. Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts 200A, 2.5 sec. @ 15 amp contact load. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current 250 millivolts, maximum, for normally closed contacts @ 23°C. @ 10 amp contact load. Drop Test: Capable of meeting specifications after a 3.28 foot (1.0 meter) Expected Life: 10 million operations, mechanical; 100,000 operations at 20 drop onto concrete in final enclosure. amps, 14VDC, resistive load on normally open contact. Flammability: UL94-HB or better (meets FMVSS 302). Initial Dielectric Strength Between Contacts and Coil: 500V rms. Notes (1) See Figure 1. (2) Inrush current for lamp load. Coil Data (3) Allowable overdrive is rated at ambient temperature for 23°C or 85°C Voltage: 12VDC. as stated with no load current flowing through the relay contacts and Resistance: See Coil Data table. minimum coil resistance. Also see Figure 2 for maximum ambient Nom. Power: (@ 23°C coil temp. and rated coil voltage.): temperature versus applied coil voltage. 1.6W, unsuppressed. (4) See Figure 2. 1.81W, with 680 ohm resistor. (5) Current and times are compatible with circuit protection by a typical Thermal Resistance: 50°C per actual coil watt in still air with no contact 20A automotive circuit breaker. Relay will make, carry and break the load current. specified current. Coil Data (@ 23°C Coil Temperature) (3) Coil Rated Coil Coil Coil Must-Operate Must-Release Allowable Designator Voltage Resistance Inductance Voltage Voltage Overdrive (VDC) (VDC) ±10% (Ohms) (H) (Ref.) (VDC) (VDC) @ 23°C @ 85°C F 12 90 0.5 7.2 1.2 20.4 14.9 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1014 specified. Refer to inside back cover. 250W 200W 100W 40W Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 – Limiting Curve for Power Load 75 Safe breaking, arc extinguished (normally open contact) for resistive loads. 60 50 40 30 20 10 1 2345 7 10 12 20 0.5 Switching Current (Amps) Figure 2 – Ambient Temperature vs. Coil Voltage for Continuous Load 130 Assumptions: 1. Thermal resistance = 50°C per watt 120 2. Still air 3. Nominal coil resistance 110 4. Maximum mean coil temperature = 180°C 5. Coil temperature rise due to load 100 = 1°C @ 4 amps = 4.5°C @ 8 amps 90 = 9.5°C @ 12 amps = 18°C @ 16 amps 80 = 26.5°C @ 20 amps 0 Amp Contact Load 6. Thermal resistance and power dissipation 4 Amp Contact Load 8 Amp Contact Load 70 based on coil resistance at 180°C 12 Amp Contact Load 7. Curves are based on 1.5 watts at 23°C 60 16 Amp Contact Load 8. When full lifetime is at high ambient and high load current, subtract 25°C from maximum allowable ambient temperature. 50 20 Amp Contact Load 40 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Ordering Information Contact Contact Part Number Arrangement Terminals Material VFM-11F21 1 Form A Quick connect AgNi 0.15 VFM-11F41 1 Form A Quick connect AgSnO VFM-15F21 1 Form C Quick connect AgNi 0.15 VFM-15F41 1 Form C Quick connect AgSnO *Standard Coil Voltages: F = 12VDC Optional Coil Suppression Add suffix -S01 for 680 ohm resistor in parallel with 12VDC coil. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present.. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1015 specified. Refer to inside back cover. Maximum Allowable Ambient Temperature (°C) Switching Voltage (VDC) Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Outline Dimensions Wiring Diagrams (Bottom Views) .906 MAX. .610 MAX. 1 Form A 1 Form C (23.0) (15.5) 2 2 53 5 3 4 1.024 MAX. RESISTOR (26.00) 1 RESISTOR 1 IF USED IF USED .453 MAX. (11.5) .187 .250 (4.8) (6.3) .236 (6.0) .315 (8.0) 2 .354 5 3 (9.0) 4 1 .451 (11.45) Connector Connectors For Use With VFM Relays PC Board Socket Wire Harness Style, Bracket Mount Socket (Order Terminals Separately) VCFM-1000 VCFM-1002 .829 ± .008 1.420 ± .015 .814 ± .015 (21.06 ± 0.2) (36.07 ± 0.38) .188 (4.8) FEMALE (20.68 ± 0.38) Q.C. TERMINALS .619 ± .008 (15.72 ± 0.2) 1.101 ± .015 .080 (27.97 ± 0.38) (2.03) .250 (6.3) FEMALE .380 REF. Q.C. TERMINALS (9.65) .234 ± .016 .060 REF. (5.94 ± 0.4) .571 ± .008 (1.52) (14.5 ± 0.2) .619 (15.71) .309 .031 ± .004 (7.86) .715 (0.8 ± 0.1) (18.15) .107 R. .236 (2.72) (6.0) 2x .177 .470 (4.50) (11.94) .235 (5.97) .315 5x ş .092 (8.00) (2.34) .714 ± .015 (18.12 ± 0.38) Connector/Terminal Usage Chart - Boldface items are stocked. Required Crimp Terminals (Order Separately) Connector Terminal P/N Alternate P/N Wire AWG Qty. Required Use in Cavities Form A Form C Form A Form C VCFM-1000 None None N/A N/A N/A N/A N/A VCFM-1002 26A1349A AMP 60249-1 12-16 2 2 3 & 5 3 & 5 26A1349B AMP 42281-1 14-18 26A1492A G&H K26313 15-20 2 3 1 & 2 1, 2 & 4 26A1492B G&H K26312 14-16 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1016 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS VF4 series 40 Amp Relay With PC Board or Quick Connect Terminals for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • 40A continuous contact rating @ 85°C. Must Operate and Must Release Voltage: See Coil Data table. • 1 Form A and 1 Form C arrangements. Initial Operate Time: 7 milliseconds, typical, with rated coil voltage • Plug-in or PC board terminals. applied. • Optional mounting bracket. Initial Release Time: 2 milliseconds, typical, with zero volts applied (for • Various enclosure options. unsuppressed relays after having been energized at rated coil voltage.) Environmental Data Conditions Temperature Range: Storage: -40°C to +155°C. (4) All parametric, environmental and life tests are performed according to EIA Operating: -40°C to +125°C . Standard RS-407-A at standard test conditions (23°C Ambient, 20-50% RH, Shock: 20g, 11 milliseconds, half sine wave pulse. 29.5 ± 1.0" Hg.) unless otherwise noted. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5 g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10 g's constant. Contact Data Arrangements: 1 Form A (SPST-NO) and 1 Form C (SPDT). Mechanical Data Material: AgNi 0.15 (consult factory for other contact materials). Max. Switching Rate: 20 operations per second with no contact load. Termination: 0.250" quick connect and printed circuit terminals. 6 operations per minute for rated life at rated load. Enclosures: (1) Max. Switching Voltage: 75VDC . Dust Cover: Protects relay from dust. For use in passenger Max. Load Current (@ 14VDC Load Voltage): compartment or enclosures. Shrouded Dust Cover: Protects relay and relay connector (order Load Form A Form C separately) from dust and splash. (NO) NO NC Weatherproof Cover: Mates with a connector (order separately) to seal relay from salt spray etc. Recommended for under Max. Continuous Current 60A 60A 40A hood application. (2) Max. Make Current 120A 120A 45A Cover Retention: Dust cover will withstand a 33.7 pound (150 Newton) (1) Max. Break Current 60A 60A 40A force (axially applied) without detachment. Ultrasonic cover: 50 pound (220 Newton). (1) Max. Switching Power: 50-500 watts DC (voltage dependent) . Weight: 31g (1.1 oz.) approximately (dust cover model). Min. Recommended Current: 1 amp @ 12VDC. Initial Voltage Drop: 200 millivolts, maximum, for normally open contacts @ 40 amp contact load. Abnormal Operation 250 millivolts, maximum, for normally closed Overload Current: Consult factory. contacts @ 30 amp contact load. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current Expected Life: 10 million operations, mechanical; 100,000 operations at 40 @ 23°C. amps, 14VDC, resistive load on normally open contact. Drop Test: Capable of meeting specifications after a 3.28 foot (1.0 meter) drop onto concrete. Flammability: UL94V-0 external; UL94-HB or better, internal parts (meets FMVSS 302). Initial Dielectric Strength Notes Between Contacts and Coil: 500V rms. (1) See Figure 1. (2) Inrush current for lamp load. Coil Data (3) Allowable overdrive is rated at ambient temperature for 23°C or 85°C as Voltage: 6, 12 and 24VDC. stated with no load current flowing through the relay contacts and Resistance: See Coil Data table. minimum coil resistance. Also see Figure 2 for maximum ambient Nom. Power: (@ 23°C coil temp. and rated coil voltage.): temperature versus applied coil voltage. 1.6W, unsuppressed. (4) See Figure 2. 1.81W, with 680 ohm resistor. (5) Current and times are compatible with circuit protection by a typical Thermal Resistance: 50°C per actual coil watt in still air with no contact automotive circuit breaker. Relay will make, carry and break the load current. specified current. Coil Data (3) Coil Rated Coil Coil Coil Must-Operate Must-Release Allowable Designator Voltage Resistance Inductance Voltage Voltage Overdrive (VDC) ±10% (Ohms) (H) (Ref.) (VDC) (VDC) (VDC) @ 23°C @ 85°C D 6 22.5 0.2 3.6 0.6 10.1 7.9 F 12 90 0.8 7.2 1.2 20.2 15.7 H 24 360 2.7 14.4 2.4 40.5 31.5 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1017 specified. Refer to inside back cover. 500W 200W 100W Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 – Limiting Curve for Power Load 75 Safe breaking, arc extinguished (normally open contact) for resistive loads. 60 50 40 30 20 10 0.5 1 2 3 4 5 710 20 30 40 Switching Current (Amps) Figure 2 – Ambient Temperature vs. Coil Voltage for Continuous Duty 130 Assumptions: 1. Thermal resistance = 50°C per watt 120 2. Still air 3. Nominal coil resistance 4. Maximum mean coil temperature = 180°C 110 5. Coil temperature rise due to load = 2°C @ 8 amps 100 = 5°C @ 16 amps = 11°C @ 24 amps 90 = 20°C @ 32 amps = 32°C @ 40 amps 80 6. Thermal resistance and power dissipation based on coil resistance at 180°C 7. Curves are based on 1.6 watts at 23°C 70 0 Amp Contact Load 8. When full lifetime is at high ambient and high 8 Amp Contact Load 16 Amp Contact Load load current, subtract 25°C from maximum 60 allowable ambient temperature. 24 Amp Contact Load 50 32 Amp Contact Load 40 40 Amp Contact Load 30 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Ordering Information Contact Contact Part Number Arrangement Material Enclosure Terminals VF4-11 * 11 1 Form A AgNi0.15 Dust cover Quick connect VF4-11 * 13 1 Form A AgNi0.15 Dust cover Printed circuit VF4-15 * 11 1 Form C AgNi0.15 Dust cover Quick connect VF4-15 * 13 1 Form C AgNi0.15 Dust cover Printed circuit VF4-25 * 11 1 Form C AgNi0.15 Shrouded dust cover Quick connect VF435 * 11 1 Form C AgNi0.15 Weatherproof cover Quick connect VF4-41 * 11 1 Form A AgNi0.15 Dust cover with bracket Quick connect VF4-45 * 11 1 Form C AgNi0.15 Dust cover with bracket Quick connect VF4-45 * 21 1 Form C AgSnO Dust cover with bracket Quick connect VF4-51 * 11 1 Form A AgNi0.15 Shrouded dust cover with bracket Quick connect VF4-55 * 11 1 Form C AgNi0.15 Shrouded dust cover with bracket Quick connect VF4-61 * 11 1 Form A AgNi0.15 Weatherproof cover with bracket Quick connect VF4-65 * 11 1 Form C AgNi0.15 Weatherproof cover with bracket Quick connect VF4-81 * 11 1 Form A AgNi0.15 Dust cover with molded bracket Quick connect VF4-85 * 11 1 Form C AgNi0.15 Dust cover with molded bracket Quick connect *Standard Coil Voltages: D = 6VDC (Consult factory for availability). Optional Coil Suppression F = 12VDC Add suffix -S07 for 180 ohm resistor in parallel with 6VDC coil. H = 24VDC (Consult factory for availability). Add suffix -S01 for 680 ohm resistor in parallel with 12VDC coil. Add suffix -S08 for 2,700 ohm resistor in parallel with 24VDC coil. Epoxy Sealed Construction Add suffix -C01 for epoxy sealed unit. Add suffix -C05 for epoxy sealed unit with resistor. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. VF4-15F11 VF4-15H11 VF4-15F13 VF4-15H13 VF4-45F11 VF4-65F11-S01 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1018 specified. Refer to inside back cover. Maximum Allowable Ambient Temperature ( °C) Switching Voltage (VDC) 86 87 30 85 87A Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Outline Dimensions Dust Cover With Quick Connect Terminals Plastic Bracket Cover With Quick Connect Terminals VF4-1_ _ (Without Bracket) & VF4-4_ _ (With Bracket) VF4-8_ _ _ _ 1.10 MAX. .170 ± .008 .866 ± .020 .236 (28.0) (4.32 ± 0.2) .197 (22.0 ± 0.5) .59 (6.0) .236 ± .015 (5.0) (15.0) .079 ± .008 (6.0 ± 0.4) (2.0 ± 0.2) .638 1.10 MAX. (16.2) 1.10 MAX. (28.0) (28.0) ş .209 (5.3) 1.004 MAX. (25.5) .622 ± .024 ş.213 ± .004 1.004 MAX. (15.8 ± 0.61) (5.4 ± 0.1) (25.5) .453 MAX. (11.5) .453 MAX. .250 (11.5) .250 (6.3) (6.3) .032 ±.001 1.10 MAX. (0.81 ± 0.03) (28.0) .250 (6.3) .315 (8.0) .122 (3.1) 86 30 .661 Printed Circuit Board Terminals (16.8) 87 Clinchable Power 85 .098 .331 (2.50) TERMINALS (8.4) #30, 87, & 87a .705 (17.9) Single Pin .126 (3.2) .098 (2.50) TIN PLATED Weatherproof Cover With Quick Connect Terminals Shrouded Dust Cover With Quick Connect Terminals VF4-3_ _ (Without Bracket) & VF4-6_ _(With Bracket) VF4-2_ _ (Without Bracket) & VF4-5_ _(With Bracket) .653 ± .066 .355 (16.6 ± 0.15) .732 (9.0) .354 (18.6) .26 (9.0) (6.6) .886 .728 ± .010 (22.5) (18.5 ± 0.25) .252 (6.4) 1.516 MAX. 1.77 ± .019 .165 ± .006 .453 MAX. (38.0) .285 (45.0 ± 0.5) (4.20 ± 0.15) (11.5) (7.25) .453 MAX. (11.5) .16 MAX. .167 (4.1) .482 (4.25) .250 TYP. (12.25) .245 .295 ±.018 .775 ± .006 (6.3) (6.3) .453 ± .006 (7.5 ± 0.45) 1.26 MAX. (19.7 ± 0.15) (11.50 ±0.15) 1.42 MAX. (32.0) .984 MAX. (36.1) .157 (25.0) 1.42 MAX. .276 REF. (4.0) (36.1) (7.0) 1.26 MAX. (32.0) .331 .331 30 (8.4) (8.4) 85 87a .705 .705 (17.9) (17.9) 86 87 .315 .177 .354 (8.0) (4.5) (8.0) .472 ± .015 .66 .661 (12.0 ± 0.38) (16.8) (16.8) Suggested PC Board Layouts (Bottom Views) VF4-XXX13 VF4-XXX12 Wiring Diagrams (Bottom Views) .071 .102 .331 (2.6) .055 (1.8) .055 .102 (8.4) .331 1 Form A 1 Form C (1.4) (1.4) (2.6) .197 (8.4) (5.0) .098 .661 .661 (2.5) 86 86 .315 (16.8) (16.8) (8.0) .315 87a 87 87 .331 (8.0) 30 30 (8.4) .055 .331 .705 RESISTOR RESISTOR (1.4) (8.4) 85 85 .803 (17.9) IF USED IF USED (20.4) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com 1019 reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1019 specified. Refer to inside back cover. 87A Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Connectors Connectors For Use With Quick Connect Terminal VF4-1_ _ _ _ , VF4-4_ _ _ _ And VF4-8_ _ _ _ Relays Wiring Harness Style Connector (order terminals separately) PC Board Socket VCF4-1001 VCF4-1000 .274 .295 (7.0) .111 (7.5) .256 (2.8) .090 .040 .512 (6.5) (2.3) (1.0) (13.0) .083 (2.1) .945 .092 .665 .945 (24.0) (2.3) (16.9) (24.0) 5 HOLES .143 1.043 .571 .905 (3.6) 1.043 .083 (26.5) (14.5) .315 (23.0) (2.1) (26.5) .805 (8.0) .331 (20.4) 2 LOCATING (8.4) .705 PINS (17.9) Wiring Harness Style, Bracket Mount Socket (order terminals separately) Connector For Use With VF4-2_ _ _ _ or VF4-5_ _ _ _ (Mount individually or can be interlocked) Relays With Shrouded Dust Cover (order terminals separately) VCF4-1002 VCF4-1003 .218 .36 1.11 1.42 (5.5) (9.1) (36.1) (28.1) .48 (12.2) .331 .661(8.4) 1.09 (16.8) (27.6) 1.00 (25.4) .315 1.57 (8.0) 1.20 .331 (39.9) (30.5) (8.4) 24A111 terminal retainer 1.31 .705 supplied with (33.3) (17.9) connector Connector For Use With VF4-3_ _ _ _ or VF4-6_ _ _ _ Relays With Weatherproof Cover Connectors to mate with the weatherproof cover relays are available from Delphi Packard (1-800-PACKARD). (Typical Delphi Packard part number: 12065685). Connector/Terminal Usage Chart - Our authorized distributors are more likely to stock boldface items. Required Crimp Terminals (Order Separately) Connector Terminal P/N Alternate P/N Wire AWG Qty. Required Form A Form C VCF4-1000 None None N/A 0 0 26A1349A AMP 60249-1 12-16 VCF4-1001 45 26A1349B AMP 42281-1 14-18 26A1348A Packard 12015864 18-20 VCF4-1002 26A1348B Packard 12015865 14-16 4 5 VCF4-1003 26A1348C Packard 12084588 10-12 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1020 specified. Refer to inside back cover. 2 1 4 3 5 Catalog 1308242 Issued 3-03 TYCO ELECTRONICS VF7series 70 Amp Relay With PC Board or Quick Connect Terminals for Automotive Applications Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Operate Data • 70A continuous contact rating @ 85°C. Must Operate and Must Release Voltage: See Coil Data table. • 1 Form A arrangements. Initial Operate Time: 7 milliseconds, typical, with rated coil voltage • Plug-in or PC board terminals. applied. • Optional mounting bracket. Initial Release Time: 2 milliseconds, typical, with zero volts applied (for unsuppressed relays after having been energized at rated coil voltage). Conditions Environmental Data All parametric, environmental and life tests are performed according to Temperature Range: Storage: -40°C to +155°C. EIA Standard RS-407-A at standard test conditions (23°C Ambient, 20- (4) Operating: -40°C to +125°C . 50% RH, 29.5 ± 1.0" Hg.) unless otherwise noted. Shock: 20g, 11 milliseconds, half sine wave pulse. Vibration: (For NC contacts, NO contacts are significantly higher.) 10-40 Hz., 1.27mm double amplitude. 40-70 Hz., 5g's constant. 70-100 Hz., 0.5mm double amplitude. 100-500 Hz., 10g's constant. Contact Data Arrangements: 1 Form A (SPST-NO). Material: AgNi 0.15 (consult factory for other contact materials). Max. Switching Rate: 20 operations per second with no contact load. Mechanical Data 6 operations per minute for rated life at rated load. Termination: 0.250" and 0.375" quick connect and printed circuit terminals. (1) Max. Switching Voltage: 75VDC . Enclosures: Plastic dust cover. Max. Load Current (@ 14VDC Load Voltage): Cover Retention: Cover will withstand a 33.7 pound (150 Newton) force Max. Continuous Current: 70A. (axially applied) without detachment. (2) Max. Make Current: 120A . Weight: 31g (1.1 oz.) approximately. (1) Max. Break Current : 70A. (1) Max. Switching Power: 60-800 watts DC (voltage dependent) . Min. Recommended Current: 1 amp @ 12VDC. Initial Voltage Drop: 200 millivolts, max., @ 70 amp contact load. Abnormal Operation Expected Life: 10 million operations, mechanical; 100,000 operations at 70 (5) amps, 14VDC, resistive load. Overload Current: 140A, 60 sec. 245A, 2 sec. 420A, 0.15 sec. 24V Jump Start: 24VDC for 5 minutes conducting rated contact current @ 23°C. Drop Test: Capable of meeting specifications after a 1.0 meter drop onto Initial Dielectric Strength concrete, (Sealed model only.) Flammability: UL94-HB or better (meets FMVSS 302). Between Contacts and Coil: 500V rms. Notes (1) See Figure 1. Coil Data (2) Inrush current for lamp load. Voltage: 12 and 24VDC. (3) Allowable overdrive is rated at ambient temperature for 23°C or 85°C as Resistance: See Coil Data table. stated with no load current flowing through the relay contacts and Nom. Power: (@ 23°C coil temp. and rated coil voltage): minimum coil resistance. Also see Figure 2 for maximum ambient 2.0W, unsuppressed. temperature versus applied coil voltage. 2.21W, with 680 ohm resistor. (4) See Figure 2. Thermal Resistance: 50°C per actual coil watt in still air with no contact (5) Current and times are compatible with circuit protection by a typical 70A load current. automotive fuse. Relay will make, carry and break the specified current. Coil Data (@ 23°C Coil Temperature) (3) Coil Rated Coil Coil Coil Must-Operate Must-Release Allowable Designator Voltage Resistance Inductance Voltage Voltage Overdrive (VDC) ±10% (Ohms) (H) (Ref) (VDC) (VDC) (VDC) @ 23°C @ 85°C F 12 72 0.5 7.2 1.2 18.1 14.1 H 24 288 2.0 14.4 2.4 36.2 28.2 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1021 specified. Refer to inside back cover. 800W 500W 200W 100W Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Figure 1 - Limiting Curve for Power Load Safe breaking, arc extinguished (normally open contact) for resistive loads. 200 100 50 40 30 20 10 0.5 1 2 345 71012 20 50 70 Switching Current (Amps) Figure 2 - Ambient Temperature vs. Coil Voltage for Continuous Duty 130 Assumptions: 1. Thermal resistance = 50°C per watt 120 2. Still air 3. Nominal coil resistance 110 4. Maximum mean coil temperature = 180°C 100 5. Coil temperature rise due to load = 2°C @ 14 amps 90 = 4°C @ 28 amps = 7°C @ 42 amps 80 = 12°C @ 56 amps = 22°C @ 70 amps 70 6. Thermal resistance and power dissipation 60 based on coil resistance at 180°C 7. Curves are based on 2.0 watts at 23°C 50 8. When full lifetime is at high ambient and high load current, subtract 25°C from maximum 0 Amp Contact Load 40 14 Amp Contact Load allowable ambient temperature. 28 Amp Contact Load 30 42 Amp Contact Load 56 Amp Contact Load 20 70 Amp Contact Load 10 90 95 100 105 110 115 120 125 130 135 140 145 150 Applied Coil Voltage (% of Rated Nominal) Ordering Information Contact Part Number Arrangement Enclosure Terminals VF7-11 * 11 1 Form A Dust cover Quick connect VF7-11 * 12 1 Form A Dust cover Printed circuit (clinch) VF7-41 * 11 1 Form A Dust cover with bracket Quick connect *Standard Coil Voltages: F = 12VDC Optional Coil Suppression H = 24VDC (Consult factory for availability) Add suffix -S01 for 680 ohm resistor in parallel with 12VDC coil. Add suffix -S08 for 2700 ohm resistor in parallel with 24VDC coil. Epoxy Sealed Construction Add suffix -C01 for epoxy sealed unit. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. VF7-11F11 VF7-11F12 VF7-41F11 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1022 specified. Refer to inside back cover. Maximum Allowable Ambient Temperature (°C) Switching Voltage (VDC) Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Outline Dimensions Dust Cover With Quick Connect Terminals Printed Circuit Board Terminals 1.04 MAX. (26.5) .236 1.04 MAX. 1.04 MAX. .59 (6.0) .165 MAX. (26.5) (26.5) (15.0) (4.2) .630 1.04 MAX. (16.0) .992 MAX. (26.5) (25.2) .209 DIA. .118 (5.3) (3.0) .992 MAX. (25.2) .059 .453 MAX. (1.5) (11.5) TIN PLATED .150 (3.8) .709 MAX. (18.0) 2 PLACES 30 .032 (0.8) .250 .118 2 PLACES (6.3) .375 .375 85 86 (3.0) .047 (9.5) (9.5) 87 (1.2) 30 .705 85 86 (17.9) .331 87 (8.4) .661 .118 (16.8) (3.0) Wiring Diagram (Bottom View) Suggested PC Board Layout (Bottom View) 1 Form A .150 .706 (3.8) (17.9) .076 .331 86 (1.93) .150 (8.4) 2 PLACES (3.8) RESISTOR 87 .086 IF USED 30 (2.18) .669 6 PLACES 85 (17.0) .335 (8.5) .150 .150 (3.8) (3.8) Connector Wiring Harness Style Connector For Use With Quick Connect VF7 Relays (order terminals separately) VCF7-1000 1.240 (31.50) 1.275 1.057 (32.38) (26.85) Connector/Terminal Usage Chart - Our authorized distributors are more likely to stock boldface items. Required Crimp Terminals (Order Separately) Connector Terminal P/N Alternate P/N Wire AWG Qty. Required VCF7-1000 26A 1350A AMP 280756-4 10-12 2 (Contacts) 26A 1350B AMP 280755-4 6-10 2 (Contacts) and 26A 1349B AMP 42281-1 14-18 2 (Coil) Note: For information on crimping tools, please consult local representative or factory. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1023 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS VTF series Flasher Modules for Automotive Applications Safety Standards: U.S.A.: SAE J 590 (turn signal) SAE J 945 (hazard warning) SAE J 2068 (turn signal/hazard warning) FMVSS 108 (all) European: Designed to meet ECO guideline 76/756 requirements. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Environmental Data (1) Operating Ambient Temperature Range: -40°C to +85°C. • Combination turn signal and hazard warning signal flasher. Storage Ambient Temperature Range: -40°C to +125°C. • Meets all applicable U.S.A. safety standards. Shock: 20g, 10 millisecond, half sine wave pulse. • Stable electronic timing. Vibration: 10-40 Hz., 1.27mm double amplitude. • VKP relay with PdCu contact for output. 40-70 Hz., 5g’s constant. • Fits ISO 7588 socket. 70-100 Hz., 0.5mm double amplitude. • Wide operating voltage and temperature range. 100-500 Hz., 10g’s constant. Conditions All parametric, environmental and life tests are performed according to EIA Standard RS407-A at standard test conditions (23°C Ambient, 20-50% RH, 29.5 ± 1.0” Hg.) unless otherwise noted. Mechanical Data Termination: 0.250”(6.35mm) quick connect. Contact Load Requirements @ 12.8VDC Enclosures: Dust Cover: Protects relay from dust. Turn Signal Mode Hazard Mode Cover Retention: 50 pound (220 Newton) minimum. Loads 5 Lamp 5 Lamp Weight: 1.3 oz. (37g) approximately. System System Rated 5x27W 10x27W Loads + 1x3.5W + 2x3.5W + 1x1.3W + 2x1.3W Abnormal Operation Drop Test: Capable of meeting specifications after a 3.28 foot (1.0 meter) Flash Rate and Duty Cycle Data drop onto concrete in final enclosure. Turn Signal Mode Hazard Mode Flammability: UL94-HB or better (meets FMVSS 302). Normal Signal Normal Signal FPM Duty Cycle FPM Duty Cycle 70-110 35-55% 70-110 35-55% Operate Data Notes Nominal Voltage: 12VDC system. (1) Three lamp combination flashers with three terminals do not meet U.S. Operating Voltage Range: 9 - 16VDC. Federal motor vehicle safety requirements when lamp outage occurs Device Voltage Drop: Less than 0.400 VDC at rated turn signal load. during hazard mode operation. For more information consult factory. Less than 0.450 VDC at rated hazard signal load. (2) The actual sound pressure is highly dependent on mounting method Inital Turn-on Time: Less than or equal to 50 msec. used. Start Time: Less than 1.0 sec per FMVSS 108. (2) Sound Pressure Level : Min. 72 dbA at 1.0 meters. Ordering Information Meets the Safety Max. Number of Lamp Outage Standard of: Flasher Type Turn Signal Mode Lamps Sensing Part Number U.S.A. Turn Turn/Hazard 5 Lamp Hazard No Warning System VTF-11F31 XX VTF-14F11XX X 10 X Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1024 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Wiring Diagram (Bottom View) Figure 1 - Electrical Contact Life vs. Load Power 300 VTF-14F11 _ 250 • TO LAMP LOAD L 200 BATTERY + 150 • + 100 50 0 1.0 1.5 2.0 2.5 3.0 Number of Cycles (Millions) Outline Dimensions Connectors Wiring Harness Style Connector 1.398 MAX. (order terminals separately) (35.5) VCF4-1001 .090 (2.3) .945 (24.0) 3X TABS TO ISO STANDARD 8092 1.043 .905 DIN 46244 .25 (6.3) X .032 (0.8) (26.5) 1.12 MAX. 1.12 MAX. (23.0) 28.5 .453 MAX. 28.5 .331 ± .006 (11.5) (8.4 ± .15) L C L OF TERMINALS .33 ± .006 .66 ± .006 (8.35 ± .15) (16.80 ± .15) Sockets Wiring Harness Style, Bracket Mount Socket PC Board Socket VCF4-1000 (order terminals separately) VCF4-1002 .274 .218 (7.0) .111 .295 (5.5) .256 (2.8) (7.5) (6.5) .040 .48 (1.0) .083 (12.2) (2.1) .092 .665 .945 .36 .512 (2.3) 1.00 (16.9) (24.0) (9.1) (13.0) (25.4) 5 HOLES .143 .083 .571 1.09 1.57 (3.6) 1.043 (2.1) .315 (14.5) (27.7) (39.9) (26.5) (8.0) 2 LOCATING .331 1.31 .805 PINS (8.4) (33.3) (20.4) .705 24A111 terminal retainer (17.9) supplied with connector Connector/Terminal Usage Chart - Our authorized distributors are more likely to stock boldface items. Connector Required Crimp Terminals (Order Separately) Terminal P/N Alternate P/N Wire AWG Qty. Required VCF4-1000 None None N/A 0 VCF4-1001 26A1349A AMP 60249-1 12-16 3 26A1349B AMP 42281-1 14-18 26A1348A Packard 12015864 18-20 VCF4-1002 26A1348B Packard 12015865 14-16 3 26A1348C Packard 12084588 10-12 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1025 specified. Refer to inside back cover. Lamp Load (Watts) Catalog 1308242 Issued 3-03 TYCO ELECTRONICS Engineering Notes Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1026 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SOLID STATE RELAYS & MODULES Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 2IO .................... Mtg. Board for Standard I/O Modules .... 1114 2IOM ................. Mtg. Board for Slim Line I/O Modules .. 1122 IAC .................... Standard AC Input Modules ................... 1110 IACM ................. Slim Line AC Input Modules .................. 1118 Transformers.............................. 201-212 2 IDC .................... Standard DC Input Modules ................... 1110 IDCM ................. Slim Line DC Input Modules .................. 1118 OAC................... Standard AC Output Module .................. 1110 Low-signal PC Board Relays. 301-336 3 OACM ............... Slim Line AC Output Module ................. 1118 ODC .................. Standard DC Output Module.................. 1110 ODCM ............... Slim Line DC Output Module ................. 1118 Mid-Range PC Board Relays ....... 19-21 SSR ................... Solid State Relay, Paired SCR Output .... 1104 4 SSRD ................. Dual Solid State Relay ............................ 1106 SSRQ................. Quad Solid State Relay........................... 1108 SSRT ................. Solid State Relay, Triac Output .............. 1102 Power PC Board Relays ................ 22-35 5 Relays with 6 Forcibly-Guided Contacts.............. 36-79 Additional solid state relays are included in our CII high performance relay product line. For an overview of the CII Plug-in/Panel Mount product line, see section 14 of this databook. 7 General Purpose Relays............701-749 Power Relays & Definite 8 Purpose Contactors...................... 89-131 Latching, Impulse & 9 Rotary Relays ...............................149-154 Automotive Relays................ 1001-1025 10 Solid State Relays & 11 Input/Output Modules ............ 1101-1126 Time Delay Relays & 12 Counters ........................................208-232 Sensors & Monitors ...................233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1101 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B SSRT series “Hockey Puck” Solid State Relay With Snubberless Triac Output File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Engineering Data Features Form: 1 Form A (SPST-NO). • Standard “hockey puck” package. Duty: Continuous. • Enhanced noise immunity (designed to meet level 3 requirements of Isolation: 4000V rms minimum, input - output. European EMC Directive). • LED indicator. Capacitance: 8.0 pf typical (input to output). • Floating terminal design. Temperature Range: • Low cost snubberless triac outputs. Storage: –40°C to +100°C • 10A & 25A rms versions. Operating Temperature: –20°C to + 80°C • AC & DC input versions. Case Material: Plastic, UL rated 94V-0. • 4000V rms isolation. Case and Mounting: Refer to outline dimension. Termination: Refer to outline dimension. Approximate Weight: 3.5 oz. (98g). Ordering Information Sample Part Number SSRT -240 D 10 1. Basic Series: SSRT = “hockey puck” triac output solid state relay 2. Line Voltage: 240 = 24 - 280 VAC 3. Input Type & Voltage: A = 90 - 280 VAC linear D = 3 - 32 VDC constant current 4. Maximum Switching Rating: 10 = .1 - 10A rms, mounted to heatsink 25 = .1 - 25A rms, mounted to heatsink Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRT-240A10 SSRT-240D10 SSRT-240A25 SSRT-240D25 Input Specifications Parameter DC Input/AC Output AC Input/AC Output Control Voltage Range V 3 - 32VDC IN 90 - 280VAC Must Operate Voltage V (Max.) 90VAC 3VDC IN(OP) Must Release Voltage V (Min.) 10VAC 1VDC IN(REL) Input Current (Max.) 14mA 8.5mA Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1102 specified. Refer to inside back cover. 1.850 (47.0) 1.700 LED INDICATOR (43.18) .875 (22.23) 1.100 1.000 .470 (27.94) (25.4) (11.9) 1.750 (44.45) 2.250 (57.15) Catalog 1308242 Issued 3-03 P&B Output Specification (@ 25°C, unless otherwise specified) SSRT-240A10 SSRT-240A25 Parameter Units Conditions & SSRT-240D10 & SSRT-240D25 Load Voltage Range V L 24 - 280 V rms Repetitive Blocking Voltage (Min.) V peak 600 - Load Current Range I * .1 - 10 A rms .1 - 25 L Resistive Single Cycle Surge Current (Min.) A peak 100 250 f = 60 Hz. V = Nom. L .1 mA rms Leakage Current (Off-State) (Max.) (120 or 240 V rms) On-State Voltage Drop (Max.) 1.5 1.3 I = Max. V peak L 500 Static dv/dt (Off-State) (Min.) V/µs Thermal Resistance, Junction to Case ° C/W 2.2 1.7 (R ) (Max.) θj-c Turn-On Time (Max.) ms 8.3 for DC input types, 20 for AC input types f = 60 Hz. 8.3 for DC input types, 30 for AC input types Turn-Off Time (Max.) ms f = 60 Hz. 2 2 I t Rating t = 8.3 ms A Sec. 41 240 Load Power Factor Rating I = Max. 0.5 - 1.0 L *See Derating Curves Electrical Characteristics (Thermal Derating Curves) 10A Units 25A Units Heatsink Recommendations • We recommend that solid state relay modules be mounted to a heatsink sufficient to maintain the module’s base temperature at less than 85°C under worst case ambient temperature and load conditions. • The heatsink mounting surface should be a smooth (30-40 micro-inch finish), flat (30-40 micro-inch flatness across mating area), un-painted surface which is clean and free of oxidation. • An even coating of thermal compound (Dow Corning DC340 or equivalent) should be applied to both the heatsink and module mounting surfaces and spread to a uniform depth of .002” to eliminate all air pockets. • The module should be mounted to the heatsink using two#10 screws. Operating Diagrams 1 1 4 -4 ZERO ZERO CONSTANT + VOLTAGE VOLTAGE CURRENT OUTPUT AC INPUT OUTPUT CIRCUIT CIRCUIT DC INPUT 3 +3 EQUIVALENT CIRCUIT ONLY 2 EQUIVALENT CIRCUIT ONLY 2 Outline Dimensions .870 (22.1) .250 (6.35) .785 (19.94) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1103 specified. Refer to inside back cover. + Catalog 1308242 Issued 3-03 P&B SSR series “Hockey Puck” Solid State Relay With Paired SCR Output File E81606 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Engineering Data • Standard “hockey puck” package. Form: 1 Form A (SPST-NO). • Enhanced noise immunity (designed to meet level 3 requirements of Duty: Continuous. European EMC Directive). Isolation: 4,000V rms minimum. • LED indicator. Capacitance: 8 pf typical (input to output). • Inverse parallel SCR output. Temperature Range: • 25, 50, & 125A rms versions. Storage: –40°C to +100°C • 120/240VAC & 480VAC output types. Operating: –20°C to +80°C • Zero voltage and random voltage turn-on versions. • AC & DC input versions. Case Material: Plastic, UL rated 94V-0. • 4,000V rms optical isolation. Case and Mounting: Refer to outline dimension. • Floating terminal design. Termination: Refer to outline dimension. Approximate Weight: 3.5 oz. (98g). Ordering Information Sample Part Number SSR 25 -240 D 1. Basic Series: SSR = "hockey puck" inverse parallel SCR output solid state relay 2. Line Voltage: 240 = 24 - 240VAC 480 = 48 - 660VAC 3. Input Type & Voltage: A = 90 - 280VAC D = 3 - 32VDC 4. Maximum Switching Rating/Output: 25 = .1 - 25A rms, mounted to heatsink 50 = .1 - 50A rms, mounted to heatsink 125 = .1 - 125A rms, mounted to heatsink 5. Options: Leave Blank = Zero voltage turn-on R = Random voltage turn-on (phase controllable) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSR-240A25 SSR-240D25 SSR-240D50 SSR-240A50 SSR-240D25R SSR-480D125 Input Specifications DC Input AC Input Parameter Zero V Turn-on Units Zero and Random V Turn-on Units Control Voltage Range V 90 - 280VAC 3 - 32VDC IN Must Operate Voltage V (Min.) 90VAC 3VDC IN(OP) Must Release Voltage V (Min.) 10VAC 1VDC IN(REL) Input Current (Max.) 15mA 15mA Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com 1104 reference purposes only. (millimeters) unless otherwise subject to change. Technical support: specified. Refer to inside back cover. 1.850 (47.0) 1.700 LED INDICATOR (43.18) .875 (22.23) 1.100 1.000 (27.94) .470 (25.4) (11.9) 1.750 (44.45) 2.250 (57.15) Catalog 1308242 Issued 3-03 P&B Output Specifications (@ 25° C, unless otherwise specified) Parameter Nom. Line Voltage Conditions Units 25A Models 50A Models 125A Models 120/240V Model V rms 24 - 280 Load Voltage Range V L 480V Model V rms 48 - 660 120/240 Model ±600 V peak Repetitive Blocking Voltage (Min.) 480V Model V peak ±1200 Load Current Range I * A rms 120/240 & 480V Models Resistive .05 - 25 .1 - 50 .1 - 125 L Single Cycle Surge Current (Min.) 120/240 & 480V Models A peak 250 750 1,700 f = 60 Hz. V = 240V rms 120/240V Model mA rms .1 L Leakage Current (Off-State) (Max.) 480V Model f = 60 Hz. V = 480V rms .25 L On-State Voltage Drop (Max.) 120/240 & 480V Models I = Max. 1.35 L 120/240 & 480V Models V/µs Static dv/dt (Off-State) (Min.) 500 Thermal Resistance, Junction to Case 120/240 & 480V Models °C/W 0.4 0.25 .15 (R ) (Max.) θJ-C 8.3 for Zero Voltage Turn-On DC input types, 120/240 & 480V Models ms Turn-On Time (Max.) f = 60 Hz. 20 for Zero Voltage Turn-On AC input types, 0.02 for Random Voltage Turn-On Models Turn-Off Time (Max.) 120/240 & 480V Models f = 60 Hz. ms 8.3 for DC input types, 30 for AC input types 2 2 120/240 & 480V Models t = 8.3 ms A Sec. I T Rating 937 2,458 12,000 Load Power Factor Rating 120/240 & 480V Models I = Max. 0.5 - 1.0 L *See Derating Curves Electrical Characteristics (Thermal Derating Curves) 25A Units 50A Units 125A Units Heatsink Recommendations • We recommend that solid state relay modules be mounted to a heatsink sufficient to maintain the module’s base temperature at less than 85°C under worst case ambient temperature and load conditions. • The heatsink mounting surface should be a smooth (30-40 micro-inch finish), flat (30-40 micro-inch flatness across mating area), un-painted surface which is clean and free of oxidation. • An even coating of thermal compound (Dow Corning DC340 or equivalent) should be applied to both the heatsink and module mounting surfaces and spread to a uniform depth of .002” to eliminate all air pockets. • The module should be mounted to the heatsink using two #10 screws. Operating Diagrams Outline Dimensions 1 -4 CONSTANT ZERO .870 VOLTAGE CURRENT OUTPUT (22.1) † CIRCUIT DC INPUT +3 2 EQUIVALENT CIRCUIT ONLY 4 1 ZERO VOLTAGE OUTPUT AC INPUT CIRCUIT† 3 2 EQUIVALENT CIRCUIT ONLY † Random Turn-on Units have a Random Turn-on circuit .250 instead of Zero Voltage Circuit (6.35) .785 (19.94) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1105 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B SSRD series Dual AC Output “Hockey Puck” Solid State Relay With Paired SCR Outputs File E81606 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Engineering Data Form: 2 Form A (2 SPST-NO). • Two independent AC output solid state relays in one standard package. Duty: Continuous. Isolation: 4000V rms input-to-output; • Enhanced noise immunity (designed to meet level 3 requirements of European EMC Directive). 2500V rms input or output to ground. Capacitance: 8.0 pf typical (input to output). • Inverse parallel SCR outputs. • 25A rms & 40A rms versions available. Temperature Range: Storage: –40°C to +100°C • 4-15 VDC input control. • Zero voltage and random voltage turn-on versions. Operating: –40°C to + 80°C Case Material: Plastic, UL rated 94V-0. • 4000V rms optical isolation. • Quick connect style terminals. Case and Mounting: Refer to outline dimension. Termination: Refer to outline dimension. Approximate Weight: 3.5 oz. (98g). Ordering Information Sample Part Number SSRD -240 D 25 1. Basic Series: SSRD = Dual output SSR - 2 SPST - NO 2. Line Voltage: 240 = 24-280 VAC 3. Input Type & Voltage: D = 4-15 VDC 4. Maximum Switching Rating/Output: 25 = .1-25A rms @ 25°C, mounted to heatsink 40 = .1-40A rms @ 25°C, mounted to heatsink 5. Options: Blank = Zero voltage turn-on (both outputs) R = Random voltage turn-on (both outputs) Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRD-240D25 SSRD-240D40 Input Specifications Parameter Units Zero V Turn-on and Random V Turn-on Units Control Voltage Range V VDC 4-15 IN Must Operate Voltage V (Min.) VDC 3.75 IN(OP) Must Release Voltage V (Min.) IN(REL) VDC 1 34 Input Current (Max.) mA DC Input Current (Min. for On-State) mA DC 7.5 Input Resistance Ohms 500 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1106 specified. Refer to inside back cover. + – – + INPUT A INPUT B 2.250 (57.15) 3 X .100 1.88 (2.54) (47.75) 1.18 (30.0) 1.01 1.750 (25.65) (44.45) 4 X .250 4 X .025 .37 (6.35) (0.64) (9.4) 1.15 (29.21) Catalog 1308242 Issued 3-03 P&B Output Specifications (@ 25° C, unless otherwise specified) Parameter Conditions Units 25A Models 40A Models Load Voltage Range V L f = 47 - 63 Hz. V rms 24-280 Peak Voltage (Min.) t = 1 Min. V peak 550 Load Current Range I * Resistive 0.1-25 0.1-40 L A rms Single Cycle Surge Current (Max.) A peak 500 780 One Second Surge Current (Max.) A peak 150 234 Leakage Current (Off-State) (Max.) V = 280V rms mA rms 0.1 L On-State Voltage Drop (Max.) I = Max. V peak 1.4 1.3 L 500 Static dv/dt (Off-State) (Min.) V/µs Thermal Resistance, Junction to Baseplate (R ) (Max.) °C/W 0.6 0.6 Both Sections On θJ-B 8.33 for Zero Voltage Turn-On Models Turn-On Time (Max.) f = 60 Hz. ms <0.1 for Random Voltage Turn-On Models Turn-Off Time (Max.) 8.33 f = 60 Hz. ms 2 2 I t Rating t = 8.3 ms A Sec. 1,041 2,435 I = Max. Load Power Factor Rating 0.5 - 1.0 L *See Derating Curves Electrical Characteristics (Thermal Derating Curves) 25A Units 40A Units 80.0 50.0 70.0 40.0 60.0 50.0 30.0 0.7°C/W 40.0 0.5°C/W 1.0°C/W 20.0 30.0 1.5°C/W 1.0°C/W 2.0°C/W 20.0 1.5°C/W 10.0 2.0°C/W 10.0 0.0 0.0 20 25 30 35 40 45 50 55 60 65 70 75 80 20 25 30 35 40 45 50 55 60 65 70 75 80 Ambient Temperature (°C) Ambient Temperature (°C) Operating Diagram Heatsink Recommendations • We recommend that solid state relay modules be mounted to a + A1 heatsink sufficient to maintain the module’s base temperature at less ZERO Control A VOLTAGE Output A than 85°C under worst case ambient temperature and load conditions. VDC Input † CIRCUIT • The heatsink mounting surface should be a smooth (30-40 micro-inch – A2 finish), flat (30-40 micro-inch flatness across mating area), un-painted + B1 surface which is clean and free of oxidation. ZERO Control B VOLTAGE Output B VDC Input • An even coating of thermal compound (Dow Corning DC340 or † CIRCUIT equivalent) should be applied to both the heatsink and module mounting – B2 surfaces and spread to a uniform depth of .002” to eliminate all air pockets. † Random Turn-on Units have a Random Turn-on circuit instead of Zero Voltage Circuit • The module should be mounted to the heatsink using two #10 screws. Outline Dimensions Input Terminal Connectors are available from several different manufacturers. AMP P/N: 103976-3 or 640440-4 Methode P/N: 1300-004-422 Consult your local distributor for these or equivalent connectors. .89 (22.6) 1.26 (32.0) Tolerance: ±.035 (0.88) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1107 specified. Refer to inside back cover. Max. Load Current (Amps) Both Outputs ON Max. Load Current (Amps) Both Outputs ON Catalog 1308242 Issued 3-03 P&B SSRQ series Quad AC Output “Hockey Puck” Solid State Relay With Triac Outputs File E29244 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Engineering Data Form: 4 Form A (4 SPST-NO). • Four independent AC output solid state relays in one standard package. • 20A rms triac outputs. Duty: Continuous. Isolation: 2500V rms input-to-output-to-ground. • 4-15 VDC input control. • Zero voltage and random voltage turn-on versions. Capacitance: 10.0 pf maximum (input to output). Temperature Range: • 2500V rms optical isolation. • Quick connect style terminals. Storage: –40°C to +125°C Operating: –40°C to + 80°C Case Material: Plastic, UL rated 94V-0. Case and Mounting: Refer to outline dimension. Termination: Refer to outline dimension. Approximate Weight: 3.5 oz. (98g). Ordering Information Sample Part Number SSRQ -240 D 20 1. Basic Series: SSRQ = Quad output SSR - 4 SPST - NO 2. Line Voltage: 240 = 24 - 280 VAC 3. Input Type & Voltage: D = 4 - 15VDC, zero voltage turn-on types. R = 4 - 15VDC, random voltage turn-on types. 4. Maximum Switching Rating/Output: 20 = .05 - 20A rms, mounted to heatsink. NOTE: 60A max. per package. 5. Options: Blank = Zero voltage turn-on (all sections) Requires "D" input type above. R = Random voltage turn-on (all sections) Requires "R" input type above. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. SSRQ-240D20 Input Specifications Parameter Conditions Units Zero V or Random V Turn-on Units Control Voltage Range V 4-15 IN @ 25°C VDC Must Operate Voltage V (Min.) VDC 4 @ 25°C IN(OP) Must Release Voltage V (Min.) @ 25°C VDC 1 IN(REL) Input Current (Typ.) mA DC 12 @ 25°C Input Impedance (Nom.) ohms 330 @ 25°C Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1108 specified. Refer to inside back cover. 0.25°C/W 0.5°C/W 1°C/W 2°C/W 3°C/W Catalog 1308242 Issued 3-03 P&B Output Specifications (@ 25° C, unless otherwise specified) Parameter Conditions Units Load Voltage Range V L V rms 24-280 Repetitive Blocking Voltage (Min.) 600 V peak - Load Current Range I * Resistive A rms .15-20 L Single Cycle Surge Current (Min.) A peak 250 Leakage Current (Off-State) (Max.) f = 60 Hz. V = 280Vrms mA rms 10 L On-State Voltage Drop (Max.) I = Max. 1.6 V peak L Static dv/dt (Off-State) (Min.) V = 280Vrms 200 V/µs L Thermal Resistance, Junction to Case (R ) (Max.) All Sections On °C/W 1.2 θJ-C Turn-On Time (Max.) f = 60 Hz. ms 8.3 for Zero Voltage Turn-On Models 0.1 for Random Voltage Turn-On Models Turn-Off Time (Max.) f = 60 Hz. ms 8.3 2 2 t = 8.3 ms A Sec. 260 I t Rating Load Power Factor Rating 0.5 - 1.0 I = Max. L *See Thermal Derating Curves. Note: While each output section is rated for a maximum of 20A, the maximum output per package is 60A. Electrical Characteristics (Thermal Derating Curves) How To Use These Curves Knowing maximum load current and maximum ambient temperature, use derating curves to determine required heat sink and maximum allowable base plate temperature. On left hand power dissipation curve, locate the point corresponding to maximum load current. Extend a line to the right from that point to the intersection of vertical line on right hand chart corresponding to maximum ambient temperature. From heat sink curve, read directly or extrapolate required heat sink size. Extend the line farther to the right and read on the right hand scale the maximum allowable base plate temperature. Example #1: Given: I = Four 7.5A loads @ 60°C L 75 Find: Minimum heatsink required Solution: From Thermal Dissipation Graph 80 4 x 7.5A = 30A 4 sections ON Heatsink = 2°C/W minimum 60 90 Example #2: 40 Given: SSRQ24020 Find: Maximum rating mounting to 1.0°C/W HS @ 60°C All 20 105 sections ON Solution: From Thermal Dissipation Graph Rating mounted to 1.0°C/W HS @ 60°C = 36A total 0 15 30 45 60 0 20 40 60 80 9A for 4 Sections ON = 36A total Loads Current (A rms) Ambient Temp. (°C) 12A for 3 Sections ON = 36A total Operating Diagram Heatsink Recommendations B1 A1 • We recommend that solid state relay modules be ZERO ZERO mounted to a heatsink sufficient to maintain the VOLTAGE OUTPUT B VOLTAGE OUTPUT A module’s base temperature at less than 85°C under † † CIRCUIT CIRCUIT worst case ambient temperature and load conditions. B2 A2 -(B) -(A) • The heatsink mounting surface should be a smooth -(D) -(C) + (30-40 micro-inch finish), flat (30-40 micro-inch D1 C1 COMMON ZERO ZERO flatness across mating area), un-painted surface which VOLTAGE VOLTAGE is clean and free of oxidation. OUTPUT D OUTPUT C † † CIRCUIT CIRCUIT • An even coating of thermal compound (Dow Corning D2 C2 EQUIVALENT CIRCUIT ONLY DC340 or equivalent) should be applied to both the † Random Turn-On Units Have A Random Turn-On Circuit Instead Of A Zero Voltage Circuit heatsink and module mounting surfaces and spread to a uniform depth of .002” to eliminate all air pockets. • The module should be mounted to the heatsink using two #10 screws. Outline Dimensions MTNG HOLE / SLOT 2 PLCS. .170 (4.3) DIA. Input Terminals mate with the following 1.125 connectors or equivalent: A1 A2 C1 C2 A1 (28.57) 1.87 – DC SEC. C AMP P/N: 103976-4 (47.5) DC SEC. A – + DC COMM Consult your local distributor for connectors. DC SEC. B – 2.3 – DC SEC. D (58.4) .025 (.635) SQ. PINS B1 B2 D1 D2 ON .100 (2.54) CENTERS .250 (6.35) Q.C. TERMS .375 .85 1.75 8 PLACES (9.5) (21.6) (44.45) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1109 specified. Refer to inside back cover. Power Dissipation (Watts) Max. Allowable Base Temperature (°C) + Catalog 1308242 Issued 3-03 P&B IAC/OAC IDC/ODC Input/Output Modules File E81606 & E29244 File LR38595M77 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Engineering Data (all I/O modules) • Industry standard package and pin-out. Switch Form: 1 Form A (SPST-NO) • Color coded by function. Duty: Continuous. • 4,000V rms optical isolation. Isolation: 4,000V rms, 60 Hz. • High immunity to false operation. Capacitance: 8 pF Typical (input to output). • Series compatible. Operating Temperature: –30°C to +80°C. • Output modules can be controlled from sinking or sourcing logic. Storage Temperature: –40°C to +85°C. • Compatible with 2IO series mounting boards. Potting Compound Flammability: UL94V-0. Approximate Weight: 1.38 oz. (35g). Ordering Information Typical Part Number B OAC -5 H 1. Basic Series: IAC = AC input module - yellow case IDC = DC input module - white case OAC = AC output module - black case ODC = DC output module - red case 2. Input or Logic Voltage: 5 = 5VDC 15 = 15VDC 24 = 24VDC 3. Options: Blank = IAC Type — 120VAC/VDC input (90-140VAC/VDC) * * IDC Type — 3.3-32VDC input * * OAC Type — 3A, 24-280VAC, zero voltage turn-on output ODC Type — 3A, 3-60VDC output A = IAC Type — 240VAC/VDC input (180-280VAC/VDC) * * OAC Type — 3A, 24-280VAC, zero voltage turn-on output ODC Type — 1A, 3-250VDC output IDC Type — 10-60VDC input * * E = IAC Type — 18-36VAC/VDC input * * F = IDC Type — 4-32VDC input & fast turn-on & turn-off times * * H = OAC Type — 5A, 24-280VAC, zero voltage turn-on output R = OAC Type — 5A, 12-280VAC, random voltage turn-on output * * Is not polarity sensitive. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. IAC-5 IDC-24 OAC-24A IAC-5A OAC-5 ODC-5 IAC-5E OAC-5A ODC-5A IAC-15 OAC-5H ODC-15 IAC-24 OAC-15 ODC-15A IDC-5 OAC-24 ODC-24 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1110 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B IAC AC Input Modules Input Specifications IAC-5 IAC-15 IAC-5A IAC-15A IAC-5E IAC-15E IAC-24 IAC-24A IAC-24E Parameter ConditionsUnitsMin. Typ.Max.Min. Typ. Max.Min. Typ.Max. Control Voltage Range V VAC/VDC 90 120 140 180 240 280 18 24 36 IN Must Operate Voltage V VAC/VDC 90 180 18 IN(OP) Must Release Voltage V VAC/VDC 20 20 3 IN(REL) Max. Input Current @V=Max. mA 6 6 18 IN Input Resistance Ohms 28K 75K 2K Output Specifications (@ +25˚C unless otherwise specified) IAC-5 IAC-5A IAC-15 IAC-15A IAC-24 IAC-24A IAC-5E IAC-15E IAC-24E Parameter Conditions Units Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Maximum Output Voltage VDC 30 30 30 Maximum Output Current mADC 50 50 50 Maximum Output Leakage Current V=Max.µADC 10 10 10 OUT Maximum Output Voltage Drop I =50mA VDC .2 .2 .2 SINK Logic Supply Voltage V VDC 3 5 6 12 15 18 20 24 30 CC Logic Supply Current V =Max. mADC 18 18 18 CC Turn-On Time (Nominal) I=25mA ms 20 20 20 SINK Turn-Off Time (Nominal) I=25mA ms 30 30 30 SINK Output Type (Open Collector) Normally Open Normally Open Normally Open (SINKING) (SINKING) (SINKING) OAC AC Output Modules Input Specifications OAC-5 OAC-5A OAC-15 OAC-15A OAC-24 OAC-24A OAC-5H OAC-5R OAC-15H OAC-15R OAC-24H OAC-24R Parameter ConditionsUnitsMin. Typ.Max.Min. Typ. Max.Min. Typ.Max. Control Voltage Range V VDC 3 5 8 9 15 18 18 24 32 IN Must Operate Voltage V VDC 3 9 18 IN(OP) Must Release Voltage V VDC 1 1 1 IN(REL) Maximum Input Current @V=Nominal mADC 20 16 13 IN Input Resistance R Ohms 220 1000 2000 IN PIN-3 must be positive with respect to PIN-4 for correct operation. Output Specifications (47 to 63 Hz.,@ +25˚C unless otherwise specified) OAC-5 OAC-5A OAC-5H IAC-15H OAC-5R OAC-15R OAC-15 OAC-15A OAC-24H OAC-24R OAC-24 OAC-24A Parameter Conditions Units Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Load Voltage V V rms 24 120/240 280 24 120/240 280 24 120/240 280 L Repetitive Blocking Voltage V peak ±600 ±600 ±600 Load Current I * A rms .05 3 .05 5 .05 5 L Ouput Current mA/°C 58mA/°C 66mA/°C 66mA/°C Derating 40°C - 80°C 30°C - 80°C 30°C - 80°C Single Cycle surge Current A peak 100 250 250 Leakage Current (Off-State) V =120VAC mA rms 1 1 1 L @ 60 Hz. V =240VAC mA rms 2 2 2 L On-State Voltage Drop I =Max. V peak 1.6 1.6 1.6 L Static dv.dt (Off-State) V/µs 200 200 200 Turn-On Time @f=60 Hz. ms 8.3 8.3 .1 Turn-Off Time ms 8.3 8.3 8.3 Output Type (Form) Normally Open 1A Normally Open 1A Normally Open 1A H/P/ Rating @ 240VAC 1/4HP 1/2HP 1/2HP Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1111 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B IDC DC Input Modules Input Specifications IDC-5 IDC-15 IDC-5A IDC-15A IDC-5F IDC-15F IDC-24 IDC-24A IDC-24F Parameter ConditionsUnitsMin. Typ.Max.Min. Typ. Max.Min. Typ.Max. Control Voltage Range V VDC ±3.3 ±24 ±32 ±10 ±60 ±4 ±32 IN Must Operate Voltage V VDC ±3.3 ±10 ±4 IN(OP) Must Release Voltage V VDC ±2 ±3 ±1 IN(REL) Maximum Input Current @ V=Max. mA 34 34 68 IN Input Resistance Ohms 1K 2K 500 Output Specifications (@ +25˚C unless otherwise specified) IDC-5 IDC-5A IDC-15 IDC-15A IDC-24 IDC-24A IDC-5F IDC-15F IDC-24F Parameter Conditions Units Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Maximum Output Voltage VDC 30 30 30 30 30 30 Maximum Output Current mADC 50 50 50 50 50 50 Maximum Output Leakage Current V=Max.µADC 10 10 10 10 10 10 OUT Maximum Output Voltage Drop I =50mA VDC .2 .2 .2 .2 .2 .2 SINK Logic Supply Voltage V VDC 3 5 6 12 15 18 202430 3 5 6 12 15 18 202430 CC Logic Supply Current V=Max. mADC 18 18 18 18 18 18 CC Turn-On Time (Nominal) I =25mA ms 1* 1* 1* .05 .05 .05 SINK Turn-Off Time (Nominal) I =25mA ms 1* 1* 1* .10 .10 .10 SINK Output Type (Open Collector) Normally Open Normally Open Normally Open Normally Open Normally Open Normally Open (SINKING) (SINKING) (SINKING) (SINKING) (SINKING) (SINKING) * Nominal Turn-On and Turn-Off times for IDC5A, IDC15A & IDC24A are 5 ms. ODC DC Output Modules Input Specifications ODC-5 ODC-5A ODC-15 ODC-15A ODC-24 ODC-24A Parameter ConditionsUnitsMin. Typ.Max.Min. Typ. Max.Min. Typ.Max. Control Voltage Range V VDC 3 5 8 9 15 18 18 24 32 IN Must Operate Voltage V VDC 3 9 18 IN(OP) Must Release Voltage V VDC 1 1 1 IN(REL) Maximum Input Current @ V=Nominal mADC 18 16 13 IN Input Resistance R Ohms 250 1000 2000 IN PIN-3 must be positive with respect to PIN-4 for correct operation. Output Specifications (@ +25˚C unless otherwise specified) ODC-5 ODC-24 ODC-5A ODC-24A ODC-15 ODC-15A Parameter ConditionsUnitsMin. Typ.Max.Min. Typ. Max. Load Voltage VL VDC 3 60 3 250 Load Current IL ADC.01 3.01 1 Maximum Surge Current for 1 Second ADC 5 5 Maximum Leakage Current (Off-State) VL=MAX µADC 500 2000 Maximum On-State Voltage Drop IL=MAX VDC 1.5 1.5 MaximumTurn-On Time ms .1 .1 MaximumTurn-Off Time ms .75 .75 At 40°C, derate by 50mA/°Cto 80°C. PIN-1 must be positive with respect to PIN-2 for correct operation. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1112 specified. Refer to inside back cover. 0.7 (17.8) 1.0 (25.4) 1.6 (40.6) 1.2 (30.5) 1.7 (43.18) 1.4 (35.6) 1.25 (38.10) Catalog 1308242 Issued 3-03 P&B IAC Operating Diagram OAC Operating Diagram 1 1 INPUT ZERO OR OUTPUT RANDOM VOLTAGE 2 2 CIRCUIT R IN +V CC 3 + 3 INPUT SCHMIDT OUTPUT 4 TRIGGER – 4 COMMON 5 EQUIVALENT EQUIVALENT CIRCUIT ONLY CIRCUIT ONLY IDC Operating Diagram ODC Operating Diagram + + 1 + 1 INPUT OUTPUT 2 – 2 AMPLIFIER + + R C +V CC 3 + 3 INPUT SCHMIDT OUTPUT 4 TRIGGER – 4 COMMON 5 EQUIVALENT EQUIVALENT CIRCUIT ONLY CIRCUIT ONLY Outline Dimensions 0.1 (2.54) CAPTIVE #4-40 PHILLIPS HEAD HOLD DOWN SCREW Note: Pin 5 is not present on Output Modules. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1113 specified. Refer to inside back cover. .270 (6.85 ) 0.3 (7.62) .042 DIA.TYP. (1.067 ) 0.6 (15.2) .30 (7.62) 1.0 (25.4) 53 4 2 1 Catalog 1308242 Issued 3-03 P&B 2IO series Mounting Boards for Input/Output Modules • LED status indicators, plug-in fuses & pull-up resistors • Card edge logic connections (2IO8, 2IO16 & 2IO24) • Screw terminal logic connections (2IO4A, 2IO4B, 2IO4C, 2IO16A, 2IO16B & 2IO16C) • Screw terminals for field wiring • UL recognized/CSA certified for 125V max. with 5A fuses; 250V max. with #22 solid copper jumper wire instead of fuses File E61482 File LR15734-93 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Ordering Information – Boldface items listed below are more likely to be maintained in stock by authorized distributors. Part Number 2IO4A 2IO4B 2IO4C 2IO8 2IO16 2IO16A 2IO16B 2IO16C 2IO24 Number of I/O Channels 4448 16 16 16 16 24 Number of Module Positions 4448 16 16 16 16 24 Field Terminals: Screw Terminals XXXX X XXX X Logic Terminals: Screw Terminals X X X X X X Logic Terminals: 26-pin card edge connector X Logic Terminals: 50-pin card edge connector X X X Designed for neg. true logic; one logic voltage X X X X X Designed for neg. or pos. true logic; mult. logic voltages X X Designed for neg. true logic; mult. logic voltages X X 2IO4A, 2IO4B & 2IO4C Outline Dimensions Mating Connectors and Fuses POWER BARRIER BLOCK 26-pin card edge connector Thomas & Betts 622-2615* 9 TERMINAL 2 PLACES 50-pin card edge connector Thomas & Betts 622-5015* 5 amp fuse Littelfuse 251-005* 1 amp fuse** Littelfuse 251-001* 3.50 FUSE * Or equivalent (88.90) 5 AMP ** Used on 2IO24 only. 3.00 (76.20) PULL-UP 2IO4B Schematic RESISTOR 3.3k Ω Designed to operate with either neg. or pos. true logic (active low or high) systems & different LED STATUS logic voltages. (output modules only - input modules must be used in negative logic systems 1 2 3 45 6 7 89 INDICATOR SIGNAL only.) BARRIER FIELD INPUT/OUTPUT SIDE IS IDENTICAL TO 2104A BLOCK 4.00 3 0.25 (101.6) 4 (6.35) 4.50 5 (114.3) PULL-UP RESISTOR 3.3k Ω 2.20 MAX. TO TOP TYPICAL (55.8) OF MODULES LED RIVETED STANDOFF 0.75 (19.05) THRU HOLE .150 DIA. BARRIER LOGIC 12 3 45 67 89 4 PLACES (3.81) STRIP GND. 2IO4A Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. LOGIC INPUT/OUTPUT FIELD INPUT/OUTPUT SPARE BARRIER 123 4 5 6 7 8 9 STRIP 2IO4C Schematic Designed to operate with neg. true logic (active low) systems & different logic voltages. FUSE 5 AMP TYP. FIELD INPUT/OUTPUT SIDE IS IDENTICAL TO 2104A 1 2 3 3 4 4 5 5 PULL-UP RESISTOR 3.3k Ω PULL-UP RESISTOR TYPICAL 3.3k Ω TYPICAL LED LED LOGIC GND. BARRIER + LOGIC 12 3 45 67 8 9 STRIP BARRIER 12 3 45 6 7 8 9 STRIP + LOGIC LOGIC INPUT/OUTPUT LOGIC INPUT/OUTPUT Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1114 Refer to inside back cover. specified. 9 8 7 6 5 4 3 2 1 + Catalog 1308242 Issued 3-03 P&B 2IO8 Outline Dimensions BARRIER STRIP BARRIER STRIP 2 TERMINAL 16 TERMINAL PIN LOGIC SUPPLY INPUT 49/25 - FUSE 1.40 5 AMP (35.56) 3.00 KEY SLOT (76.20) 3.50 2.60 (88.90) (66.04) PULL-UP 0.39 RESISTOR (7.62) 0 1 2 3 4 567 3.3k Ω 0.45 7.5 0.25 8.00 (11.43) (190.5) (6.35) (203.2) 0.40 (10.16) 2.20 MAX TO TOP (55.8) OF MODULES 0.75 RIVETED STANDOFF LED STATUS (19.05) THRU HOLE .150 DIA. INDICATOR 4 PLACES (3.81) 2IO8 Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. FIELD INPUT/OUTPUT BARRIER STRIP - EDGE 1 2 3 4 5 6 7 8 9 10 1112 1314 15 16 FUSE CONN. 5 AMP BOT. 1 TYP. 2 LOGIC GND. 3 ALL 4 EVEN 5 PINS TOP 25 49 +LOGIC 47 23 45 21 PULL-UP 43 19 17 41 RESISTOR 39 15 37 13 3.3k Ω 11 35 TYPICAL 33 9 25 1 1 26 50 OR PIN PIN LED USER INSTALLABLE CONN. CONN. JUMPER 2 (PLCS) 2IO16 Outline Dimensions BARRIER STRIP BARRIER STRIP 2 TERMINAL 16 TERMINAL 0.40 LOGIC SUPPLY INPUT 2 PLACES 14.05 (10.16) 0.25 (356.87) (6.35) - 1.40 3.50 (35.56) (88.90) FUSE 5 AMP 2.60 (66.04) 13 1.60 KEY SLOT 11 (40.64) 1 0 12 45 6 78 9 11 12 14 15 3 10 13 PULL-UP 0.45 EDGE CARD IS ARRANGED TO 0.25 (11.43) ACCOMMODATE 50 CONTACT 0.1" (3mm) RESISTOR (6.35) CENTER CARD EDGE CONNECTOR 3.3k Ω LED STATUS INDICATOR 0.75 (19.05) 2.20 MAX. TO TOP (55.8) OF MODULES 6.25 7.30 (158.75) (185.42) RIVETED STANDOFF NYLON STANDOFF THRU HOLE 150 DIA. 4 PLACES (3.81) 2IO16 Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. FIELD INPUT/OUTPUT BARRIER STRIPS - 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 + FUSE EDGE CONN. 5 AMP TYP. BOT. 1 LOGIC ALL 2 3 GND. EVEN 4 PINS 5 TOP 1 17 19 21 23 25 27 29 31 33 35 PULL-UP 37 39 RESISTOR 41 3.3k Ω 43 45 TYPICAL 47 + LOGIC 49 LED USER INSTALLABLE JUMPER (2 PLACES) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1115 specified. Refer to inside back cover. LOGIC INPUT/OUTPUT LOGIC INPUT/OUTPUT + + 3231302928272625242322 2120191817 16151413121110 9 8 7 6 5 4 3 2 1 16 151413121110 9 8 7 6 5 4 3 2 1 Catalog 1308242 Issued 3-03 P&B 2IO16A, 2IO16B & 2IO16C Outline Dimensions BARRIER STRIP 16 TERMINAL 0.25 4 PLACES POWER 14.05 (6.35) (356.87) 1.40 3.50 (35.56) FUSE (88.90) 5 AMP PULL-UP LED STATUS 1.60 RESISTOR + - 1 2 3 4 56 7 8 9 10 11 12 13 14 15 16 17 18 19 20 212223 24 2526 27 28 29 30 31 32 INDICATOR (40.64) 3.3k Ω 0.25 (6.35) BARRIER STRIP SIGNAL 2 TERMINAL LOGIC SUPPLY INPUT 0.75 (19.05) 2.20 MAX. TO TOP (55.8) OF MODULES 7.30 6.25 (185.42) (158.75) NYLON STANDOFF RIVETED STANDOFF THRU HOLE 150 DIA. 4 PLACES (3.81) 2IO16A Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. FIELD INPUT/OUTPUT BARRIER STRIP 1 2 3 4 5 6 7 8 9 10 1112 1314 1516 1718 1920 2122 2324 2526 2728 2930 3132 FUSE 5 AMP TYP. 1 2 3 4 5 PULL-UP RESISTOR LED 3.3k Ω TYPICAL BARRIER STRIP + - 1 2 3 4 5 6 7 8 9 10 1112 1314 1516 1718 1920 2122 2324 2526 2728 2930 3132 + LOGIC LOGIC GND. LOGIC INPUT/OUTPUT 2IO16B Schematic Designed to operate with either neg. or pos. true logic (active low or high) systems & different logic voltages. (Note above applies to output modules only. Input modules must be use in negative logic systems only.) FIELD INPUT/OUTPUT SIDE IS IDENTICAL TO 21016A 3 4 5 PULL-UP LED RESISTOR 3.3k Ω TYPICAL BARRIER STRIP + - 1 2 3 4 5 6 7 8 9 10 1112 1314 1516 1718 1920 2122 2324 2526 2728 2930 3132 + LOGIC LOGIC GND. LOGIC INPUT/OUTPUT Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1116 Refer to inside back cover. specified. 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 Catalog 1308242 Issued 3-03 P&B 2IO16C Schematic Designed to operate with neg. true logic (active low) systems & different logic voltages. FIELD INPUT/OUTPUT SIDE IS IDENTICAL TO 21016A 3 4 5 PULL-UP LED RESISTOR 3.3k Ω TYPICAL BARRIER STRIP + - 1 2 3 4 5 6 7 8 9 10 1112 1314 1516 1718 1920 2122 2324 2526 2728 2930 3132 + LOGIC LOGIC GND. LOGIC INPUT/OUTPUT 2IO24 Outline Dimensions 18.75 (476.25) 16.50 (419.10) 11.00 1.13 BARRIER STRIP (279.40) 5.50 (28.58) 16 TERMINAL (139.70) 3 PLACES 4.50 FUSE (114.30) 5 AMP 4.00 (101.60) 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 - + 1 CUSTOMER 0.40 PULL-UP KEY SLOT FUSE 0.25 OPTION (10.16) BARRIER STRIP RESISTOR 3.3k Ω 1 MAP (6.35) 2 TERMINAL 2 1.00 2.60 8.06 LOGIC SUPPLY INPUT (25.4) (66.04) (204.72) 2 PLACES 0.75 (19.05) 2.20 MAX. TO TOP (55.8) OF MODULES Notes LED STATUS 1 2 + LOGIC AVAILABLE AT INDICATOR PIN 49 BY RELOCATING FUSE EDGE CARD IS ARRANGED TO RIVETED STANDOFF ACCOMMODATE 50 CONTACT, THRU HOLE 150 DIA. 0.1" (3mm) CENTER, CARD EDGE 8 PLACES (3.81) CONNECTOR 2IO24 Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. BARRIER STRIPS FIELD INPUT/OUTPUT FUSE 1 AMP - 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 + FUSE EDGE 5 AMP CONN. TYP. 1 BOT. 2 LOGIC ALL GND. EVEN 3 4 PINS 5 TOP 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 + LOGIC 49 USER INSTALLABLE PULL-UP LED STATUS JUMPER OR FUSE RESISTOR INDICATOR 3.3k Ω TYPICAL Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1117 specified. Refer to inside back cover. LOGIC INPUT/OUTPUT 26 28 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 54 3 2 1 Catalog 1308242 Issued 3-03 P&B IACM/OACM IDCM/ODCM Slim Line Input/Output Modules File E81606 & E29244 File LR38595M77 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Engineering Data (all I/O modules) Features • Slim line .4” (10.16mm) thick package. Switch Form: 1 Form A (SPST-NO) Duty: Continuous. • Foot print same as .6” (15.24mm) thick package. • 4,000V rms optical isolation. Capacitance: 8 pF Typical (input to output). Operating Temperature: –30°C to +80°C. • Color coded by function. • High immunity to false operation. Storage Temperature: –40°C to +85°C. Potting Compound Flammability: UL94V-0. • Series compatible. • Output modules can be controlled from sinking or sourcing logic. Solderability: 260°C for 5 seconds, maximum. Approximate Weight: .87 oz. (22.1g). • Compatible with 2IOM series mounting boards. Ordering Information Typical Part Number OACM –5 H B 1. Basic Series: IACM = Slim line AC input module — yellow case IDCM = Slim line DC input module — white case OACM = Slim line AC output module — black case ODCM = Slim line DC output module — red case 2. Input or Logic Voltage: 5 = 5VDC 15 = 15VDC 24 = 24VDC U = OACM & ODCM Types 3-15VDC input voltage 3. Options: Blank = IACM Type — 120VAC/VDC input (90-140VAC/VDC) * * IDCM Type — 3.3-32VDC input * * OACM Type — 3A, 24-280VAC, zero voltage turn-on output ODCM Type — 3A, 3-60VDC output A = IACM Type — 240VAC/VDC input (180-280VAC/VDC) * * IDCM Type — 10-60VDC input * * OACM Type — 3A, 24-280VAC ODCM Type — 1A, 5-250VDC output E = IACM Type — 18-36VAC/VDC input * * F = IDCM Type — 4-32VDC input & fast turn-on & turn-off times * * H = OACM Type — 5A, 24-280VAC, zero voltage turn-on output * * Is not polarity sensitive. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery. IACM-5 OACM-5H IACM-5A OACM-U IDCM-5 OACM-UH OACM-5 ODCM-5 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1118 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B IACM AC Input Modules Input Specifications IACM-5 IACM-15 IACM-5A IACM-15A IACM-5E IACM-15E IACM-24 IACM-24A IACM-24E Parameter ConditionsUnitsMin. Typ.Max.Min. Typ. Max.Min. Typ.Max. Control Voltage Range V VAC/VDC 90 120 140 180 240 280 18 24 36 IN Must Operate Voltage V VAC/VDC 90 180 18 IN(OP) Must Release Voltage V VAC/VDC 20 20 3 IN(REL) Max. Input Current @ V=Max. mA 6 6 18 IN Input Resistance RIN Ohms 28K 75K 2K Output Specifications (@ +25˚C unless otherwise specified) IACM-5 IACM-5A IACM-15 IACM-15A IACM-24 IACM-24A IACM-5E IACM-15E IACM-24E Parameter Conditions Units Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Maximum Output Voltage VDC 30 30 30 Maximum Output Current I mADC 50 50 50 SINK Maximum Output Leakage Current V=Max. µADC 10 10 10 OUT Maximum Output Voltage Drop I =50mA VDC .2 .2 .2 SINK Logic Supply Voltage V VDC 3 5 6 12 15 18 20 24 30 CC Maximum Logic Supply Current V =Max. mADC 18 18 18 CC Turn-On Time (Nominal) I=25mA ms 20 20 20 SINK Turn-Off Time (Nominal) I=25mA ms 30 30 30 SINK Output Type (Open Collector) Normally Open Normally Open Normally Open (Sinking) (Sinking) (Sinking) OACM AC Output Modules Input Specifications OACM-5 OACM-5H OACM-15 OACM-15H OACM-24 OACM-24H OACM-U OACM-UH OACM-5R OACM-15R OACM-24R OACM-UH Parameter Conditions Units Min. Typ. Max. Min. Typ. Max. Min. Typ. Max .Min. Typ. Max. Control Voltage Range V VDC 3 5 8 9 15 18 18 24 32 3 5 15 IN Must Operate Voltage V VDC 3 9 18 3 IN(OP) Must Release Voltage V VDC 1 1 1 1 IN(REL) Input Current @V =Nominal mADC 20 16 13 44 IN Input Resistance R Ohms 220 1000 2000 360 IN PIN-3 must be positive with respect to PIN-4 for correct operation. Output Specifications (47 to 63 Hz.,@ +25˚C unless otherwise specified) OACM-5 OACM-15 OACM-5H IAC-15H OACM-5R OACM-15R OACM-24 OACM-U OAC-24H OACM-UH OACM-24R OACM-UR Parameter Conditions Units Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Load Voltage V V rms 24 120/240 280 24 120/240 280 24 120/240 280 L Repetitive Blocking Voltage V peak ±600 ±600 ±600 Load Current I* A rms .05 3 .05 5 .05 5 L Output Current mA/°C 58mA/°C 66mA/°C 66mA/°C Derating 40°C - 80°C 30°C - 80°C 30°C - 80°C Single Cycle Surge Current A peak 100 250 250 Leakage Current (Off-State) V =120VAC mA rms 1 1 1 L V =240VAC mA rms 2 2 2 L On-State Voltage Drop I =Max. V peak 1.6 1.6 1.6 L Static dv.dt (Off-State) V/µs 200 200 200 Turn-On Time @ f=60 Hz. ms 8.3 8.3 .1 Turn-Off Time ms 8.3 8.3 8.3 H/P/ Rating @ 240VAC HP 1/4 1/2 1/2 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1119 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B IDCM DC Input Modules Input Specifications IDCM-5 IDCM-15 IDCM-5A IDCM-15A IDCM-5F IDCM-15F IDCM-24 IDCM-24A IDCM-24F Parameter ConditionsUnitsMin. Typ.Max.Min. Typ. Max.Min. Typ.Max. Control Voltage Range V VDC ±3.3 ±24 ±32 ±10 ±60 ±4 ±32 IN Must Operate Voltage V VDC ±3.3 ±10 ±4 IN(OP) Must Release Voltage V VDC ±2 ±3 ±1 IN(REL) Maximum Input Current @V=Max. mA 34 34 68 IN Input Resistance R Ohms 1000 2000 500 IN Output Specifications (@ +25˚C unless otherwise specified) IDCM-5 IDCM-15 IDCM-24 IDCM-24 IDCM-5A IDCM-15A IDCM-24A IDCM-5F IDCM-15F IDCM-24F Parameter Conditions Units Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Min Typ Max Maximum Output Voltage VDC 30 30 30 30 30 30 Maximum Output Current mADC 50 50 50 50 50 50 Maximum Output Leakage Current V=Max.µADC 10 10 10 10 10 10 OUT Maximum Output Voltage Drop I =50mA VDC .2 .2 .2 .2 .2 .2 SINK Logic Supply Voltage V VDC 3 5 6 12 15 18 202430 3 5 6 12 15 18 202430 CC Logic Supply Current V=Max. mADC 18 18 18 18 18 18 CC Turn-On Time (Nominal) I =25mA ms 1* 1* 1* .05 .05 .05 SINK Turn-Off Time (Nominal) I =25mA ms 1* 1* 1* .10 .10 .10 SINK Output Type (Open Collector) Normally Open Normally Open Normally Open Normally Open Normally Open Normally Open (SINKING) (SINKING) (SINKING) (SINKING) (SINKING) (SINKING) * Nominal Turn-On and Turn-Off times for IDCM5A, IDCM15A & IDCM24A are 5 ms. ODCM DC Output Modules Input Specifications ODCM-5 ODCM-5A ODCM-15 ODCM-15A ODCM-24 ODCM-24A ODCM-U ODCM-UA Parameter Conditions Units Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Control Voltage Range V VDC 3 5 8 9 15 18 18 24 32 3 5 15 IN Must Operate Voltage V VDC 3 9 18 3 IN(OP) Must Release Voltage V VDC 1 1 1 1 IN(REL) Maximum Input Current @V =Nominal mADC 18 16 13 44 IN Input Resistance R Ohms 250 1000 2000 360 IN PIN-3 must be positive with respect to PIN-4 for correct operation. Output Specifications (@ +25˚C unless otherwise specified) ODCM-5 ODCM-15 ODCM-5A ODCM-15A ODCM-24 ODCM-U ODCM-24A ODCM-UA Parameter Conditions Units Min. Typ. Max. Min. Typ. Max. Load Voltage V VDC 3 60 3 250 L Load Current I* ADC.01 3.01 1 L Maximum Surge Current for 1 Second ADC 5 5 Maximum Leakage Current (Off-State) V =MAX µADC 500 2000 L Maximum On-State Voltage Drop I =MAX VDC 1.5 1.5 L MaximumTurn-On Time ms .1 .1 MaximumTurn-Off Time ms .75 .75 * Above 40°C, derate by 50mA/°C to 80°C. PIN-1 must be positive with respect to PIN-2 for correct operation. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1120 specified. Refer to inside back cover. 0.7 (17.8) 1.6 (40.6) 1.2 (30.5) 1.7 (43.18) 1.4 (35.6) 1.00 (25.4) Catalog 1308242 Issued 3-03 P&B IACM Operating Diagram OACM Operating Diagram 1 1 INPUT OUTPUT ZERO OR RANDOM VOLTAGE 2 2 CIRCUIT RIN +V CC 3 + 3 INPUT SCHMIDT OUTPUT – 4 4 TRIGGER COMMON 5 EQUIVALENT EQUIVALENT CIRCUIT ONLY CIRCUIT ONLY ODCM Operating Diagram IDCM Operating Diagram + + + 1 1 INPUT OUTPUT 2 – 2 AMPLIFIER + + R C +V + 3 CC 3 INPUT SCHMIDT OUTPUT 4 – 4 TRIGGER COMMON 5 EQUIVALENT EQUIVALENT CIRCUIT ONLY CIRCUIT ONLY Outline Dimensions Note: Pin 5 is not present on Output Modules. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1121 specified. Refer to inside back cover. (6.85 ) 0.3 (7.62) (1.067 ) .270 .042 DIA.TYP. 0.4 (10.16) .10 (2.54) 53 4 2 1 Catalog 1308242 Issued 3-03 P&B 2IOM series Space Saving Mounting Boards for Slim Line Input/Output Modules • LED status indicators, plug-in fuses & pull-up resistors • Card edge, straight header, right-angle header and screw terminal logic connections • Screw terminals for field wiring • UL recognized/CSA certified for 125V max. with 5A fuses; 250V max. with #22 solid copper jumper wire instead of fuses File E61482 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Ordering Information - Boldface items listed below are more likely to be maintained in stock by authorized distributors. Part Number 2IOM4A 2IOM16 2IOM16A 2IOM16E 2IOM24 2IOM24D 2IOM32D Number of I/O Channels 4 16 16 16 24 24 32 Number of Module Positions 4 16 16 16 24 24 32 Field Terminals: Screw Terminals X X X X X X X Logic Terminals: Screw Terminals X X Logic Terminals: 50-pin card edge connector X X X Logic Terminals: 50-pin straight header XX Logic Terminals: 50-pin right angle header X Will accept 50-pin dual row header X X Designed for neg. true logic; one logic voltage X X X X X X X Mating Connectors and Fuses 1 50-pin card edge connector Thomas & Betts 622-5015 1 50-pin header connector Thomas & Betts 609-5030 1 5 amp fuse Littelfuse 251-005 3 1 7 amp fuse Littelfuse 251-007 2 1 1 amp fuse Littelfuse 251-001 Notes: 1. Or equivalent. 2. Used only on 24 and 32 position models. 3. Used only on 2IOM4A and 2IOM16A. 2IOM4A Outline Dimensions 2IOM4A Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. .250 3.25 .250 (6.35) (82.55) FIELD INPUT/OUTPUT (6.35) SPARE 1 9 BARRIER STRIP BARRIER STRIP 12 34 5 6 78 9 FUSE 9 TERMINAL FUSE 7 AMP 2 PLACES 3.25 7-AMP TYPICAL 1 (82.55) PULL-UP 4 PLACES 2 RESISTORS 3 2.75 4 3.3K Ω (69.85) 5 0 1 2 3 LED PULL-UP STATUS RESISTOR LED 3.3k Ω INDICATOR 1 9 TYPICAL .250 LOGIC BARRIER (6.35) GND. STRIP 123 45 67 89 1.9 MAX. TO TOP + LOGIC (48.3) OF MODULE LOGIC INPUT/OUTPUT RIVETED STANDOFF 0.75 THRU HOLE 4 PLACES (19.05) .150 DIA. 2.75 (3.81) (69.85) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1122 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 2IOM16 & 2IOM16E Outline Dimensions 10.00 .400 .450 BARRIER STRIP (254.0) (10.16) .200 BARRIER STRIP .250 (11.43) 2 TERMINAL LOGIC SUPPLY INPUT (5.08) 16 TERMINAL 2 PLACES (6.35) 116 17 32 EDGE CARD 49 FUSE +- IS ARRANGED 5 AMP TO ACCOMODATE 1.55 2.60 50 CONTACT (39.37) (66.04) KEY 0.1” (3mm) CENTER, 2IOM16E With Right-Angle Header SLOT CARD EDGE CONNECTOR 1.45 3.50 (36.83) (88.90) 1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PULL-UP RESISTORS 3.3K Ω .200 .250 (5.08) (6.35) LED STATUS INDICATOR WILL ACCEPT 50 PIN DUAL .750 ROW HEADER (19.05) 1.9 MAX. TO TOP RIVETED STANDOFF (48.3) OF MODULES THRU HOLE 4 PLACES 4.23 .150 DIA. 5.13 (130.18) (107.32) (3.81) 2IOM16 & 2IOM16E Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. BARRIER FIELD INPUT/OUTPUT STRIPS – 12 34 56 78 910 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 + FUSE 5 AMP EDGE CONN. BOT. 1 TYPICAL 2 LOGIC ALL 3 GND. EVEN 4 PINS 5 TOP 1 + LOGIC 17 19 21 23 25 27 29 31 33 35 37 39 41 LED 43 45 47 + LOGIC 49 PULL-UP RESISTOR 3.3k Ω� USER INSTALLABLE JUMPER (2 PLACES) TYPICAL 2IOM16A Outline Dimensions 9.50 .250 (241.30) BARRIER STRIP 4.68 .250 (6.35) .250 16 TERMINAL (118.75) (6.35) (6.35) 4 PLACES 116 17 32 1.13 FUSE (28.58) 7 AMP 16 PLACES 3.25 2.75 (82.55) (69.85) PULL-UP RESISTOR 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3.3K Ω LED STATUS +- INDICATOR 116 17 32 9.00 BARRIER STRIP 2 TERMINAL (228.60) LOGIC SUPPLY INPUT .750 RIVETED STANDOFF 1.9 MAX. TO TOP (19.05) THRU HOLE (48.3) OF MODULES 4 PLACES .150 DIA. (3.81) 9.00 (228.6) 2IOM16A Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. BARRIER FIELD INPUT/OUTPUT STRIP 12 34 56 78 910 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 FUSE 7 AMP 1 TYPICAL 2 3 4 5 LED PULL-UP RESISTOR BARRIER 3.3k Ω STRIP TYPICAL + – 12 34 56 78 910 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 LOGIC INPUT/OUTPUT Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1123 specified. Refer to inside back cover. LOGIC INPUT/OUTPUT LOGIC + LOGIC GND. Catalog 1308242 Issued 3-03 P&B 2IOM24 & 2IOM24D Outline Dimensions 8.00 .400 .250 (203.20) (10.16) .250 (6.35) (6.35) 24 112 13 BARRIER STRIP 2 TERMINAL +- 2IOM24D With Straight Header LOGIC SUPPLY INPUT 5.50 FUSE (139.70) 1 AMP FUSE 49 5 AMP EDGE CARD IS 24 PLACES ARRANGED TO ACCOMODATE 50 CONTACT LED 0 1 2 3 4 5 6 7 8 9 10 11 0.1” (3mm) CENTER, STATUS CARD EDGE CONNECTOR INDICATOR 2.60 23 22 21 20 19 18 17 6 15 14 13 12 (66.04) 6.00 KEY SLOT (152.40) PULL-UP RESISTORS 3.3K Ω BARRIER STRIP 12 TERMINAL 4 PLACES 48 37 36 25 .250 .250 (6.35) (6.35) WILL ACCEPT 50 PIN DUAL ROW HEADER .750 1.9 MAX. TO TOP (19.05) RIVETED STANDOFF (48.3) OF MODULES THRU HOLE 4 PLACES .150 DIA. (3.81) 7.50 (190.50) 2IOM24 & 2IOM24D Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. BARRIER STRIP FUSE +- 12 34 56 78 910 11 12 13 14 15 16 17 18 19 20 21 22 23 24 FOR FIELD WIRING 1 AMP OF MODULE 1 OPTIONAL INPUT/OUTPUT 2 FUSE 1 AMP 0 1 2 3 4 5 6 7 8 9 10 11 FUSE 49 3 5 AMP 4 5 47 MODULE 45 43 LOCATION 41 39 37 35 33 31 29 27 25 LED ALL EVEN PINS PULL-UP 2-50 RESISTOR NETWORK 23 3.3k Ω 21 19 17 15 13 11 9 7 5 3 1 MODULE 5 4 LOCATION 50-PIN 3 23 22 21 20 19 18 17 16 15 14 13 12 CONNECTOR 2 BARRIER STRIP 1 FOR FIELD WIRING OF MODULE 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 3029 28 27 26 25 INPUT/OUTPUT Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1124 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 2IOM32D Outline Dimensions .250 10.20 .400 BARRIER STRIP 2 TERMINAL .250 (6.35) (10.16) (261.62 LOGIC SUPPLY INPUT (6.35) 116 17 32 +- FUSE 1 AMP. 2IOM32D With Straight Header EDGE CARD IS ARRANGED FUSE TO ACCOMODATE 49 5 AMP 50 CONTACT 32 PLACES 0.1” (3mm) CENTER, CARD EDGE 3.30 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 5.7 CONNECTOR (83.82) (144.78) 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 2.60 (66.04) LED 6.20 1 STATUS (157.48) INDICATOR PULL-UP RESISTORS 3.3K Ω 64 49 48 33 5.50 .250 BARRIER STRIP (139.7) (6.35) 16 TERMINAL .250 4 PLACES (6.35) 1.9 MAX. TO T RIVETED STANDOFF (48.3) OF MODU THRU HOLE 6 PLACES .750 .150 DIA. 9.70 (19.05) (3.81) (246.38) 2IOM32D Schematic Designed to operate with neg. true logic (active low) systems & one logic voltage. BARRIER FIELD INPUT/OUTPUT STRIP – 12 34 56 78 910 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 + FUSE 5 AMP 1 2 FUSE 3 1 AMP 4 5 45 46 43 49 48 44 50 47 41 36 42 35 40 38 39 37 LED INDICATOR PULL-UP RESISTOR 3.3k Ω 14 12 13 11 16 9 15 10 4 1 7 3 2 8 5 6 5 17 4 19 3 21 22 2 23 1 25 26 28 30 31 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 34 FIELD INPUT/OUTPUT Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1125 specified. Refer to inside back cover. LOGIC INPUT/OUTPUT LOGIC GROUND Catalog 1308242 Issued 3-03 P&B Engineering Notes Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1126 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 TIME DELAY RELAYS & MODULES Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 AGASTAT Timer Accessories............................................. 1206 AGASTAT Timer Terms and Definitions ............................. 1204 AGASTAT Timer Timing Modes ......................................... 1205 2100 ..................... Miniature Electropneumatic Timer...... 1254 Transformers.............................. 201-212 2 7000 ..................... Electropneumatic Timer ...................... 1248 3RP15................... Programmable Time Delay Relay ........ 1207 48K ....................... Programmable Time Delay Relay ........ 1210 Low-signal PC Board Relays. 301-336 3 CB ........................ Discrete Function Time Delay Relay ... 1228 CD ........................ Discrete Function Time Delay Relay ... 1222 CG ........................ Discrete Function Time Delay Relay ... 1220 Mid-Range PC Board Relays ....... 19-21 CH ........................ Discrete Function Time Delay Relay ... 1226 4 CK......................... Discrete Function Time Delay Relay ... 1224 CL ......................... Discrete Function Time Delay Relay ... 1231 CN1 ...................... Discrete Function Time Delay Relay ... 1219 Power PC Board Relays ................ 22-35 5 NOTE: In addition to the products listed in this section of the CNM5 ................... Programmable Time Delay Relay ........ 1215 databook, time delay relays are also described in other CNS ...................... Programmable Time Delay Relay ........ 1213 sections are available with printed circuit board CNT ...................... Programmable Time Delay Relay ........ 1211 terminals. Following is a list: Relays with CR ........................ Discrete Function Time Delay Relay ... 1230 6 Forcibly-Guided Contacts.............. 36-79 Plug-in/Panel Mount Relays CU ........................ Discrete Function Time Delay Relay ... 1231 MT* .......................................................................... 742 MD0 ..................... Discrete Function Time Delay Relay ... 1233 Plug-in/Panel Mount *Relay, socket and module combination. P&B Time Delay Relay Terms & Definitions ...................... 1202 7 General Purpose Relays............701-749 P&B Time Delay Relay External Resistor Guide................. 1203 Latching, Impulse, Rotary & SCB ...................... Discrete Function Time Delay Relay ... 1235 Special Application Relays SCE ...................... Discrete Function Time Delay Relay ... 1239 TR ............................................................................. 917 Power Relays & Definite 8 SCF....................... Programmable Time Delay Relay ........ 1218 Purpose Contactors...................... 89-131 Time delay relays are also included in our line of high SRC ...................... Discrete Function Time Delay Relay ... 1237 performance relays (see overview in section 14 of this SSC ...................... Discrete Function Time Delay Relay ... 1234 databook). Latching, Impulse & SSF ....................... Programmable Time Delay Relay ........ 1217 9 Rotary Relays ...............................149-154 SST ....................... Discrete Function Time Delay Relay ... 1238 STA....................... Discrete Function Time Delay Relay ... 1236 VTM-1................... Discrete Function Timing Module ....... 1240 Automotive Relays ......................141-148 10 VTM1.................... Discrete Function Timing Module ....... 1241 VTM2.................... Discrete Function Timing Module ....... 1244 VTM3.................... Discrete Function Timing Module ....... 1245 Solid State Relays & VTM4.................... Discrete Function Timing Module ....... 1246 11 Input/Output Modules ................195-207 VTM7.................... Discrete Function Timing Module ....... 1247 VTMA1 ................. Discrete Function Timing Module ....... 1242 Time Delay Relays & VTMR1 ................. Discrete Function Timing Module ....... 1243 12 Modules .................................... 1201-1256 Sensors & Monitors ...................233-234 13 High Performance Relays and Contactors (overview) ....... 233-234 14 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1201 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B P&B Solid State Time Delay Terms and Definitions A wide selection of various types of solid state time delay controls are This additional change may be as much as 1-4% (depending again on time presented by Potter & Brumfield to meet the demands of commerce and delay type and design) and is usually obtained with off periods from 1-24 industry. Typical applications for P&B time delay relays include data hours or more. processing operations, machine tool, safety device control and alarm circuit actuating. These diverse applications require a wide variety of time Repeatability - The percent variance of time within a group of consecu- delays such as: fixed time delay on “operate” or “release” which is tive timing cycles, starting with the second operation, when the timing factory set and cannot be adjusted; resistor-adjustable time delay on device is operated under constant conditions (constant on-off times, input “operate“ which is adjustable with an external resistor; knob-adjustable voltage and temperature). The average of a series of five consecutive time delay on “operate” which has a calibrated knob built into the operations, at any given set of conditions within specifications, will serve assembly for ease of adjusting the time period. Each of the series of solid as the reference for determining the variation of individual readings within state time delays presented here varies in its degree of accuracy, variety the group from the average. The maximum variation under such condi- available and cost to meet the requirements of every application. tions should not exceed the repeatability value specified. For conve- nience, repeatability under standard conditions could be determined from Timing Variations - Any difference between the actual time delay of a the test used to measure ATSC (see below, left). particular device and the nominal value specified for that device. Tolerance - The variation between the specified delay time and the These variations are due to: ATSC value, given in percent of the former. (1) Manufacturing tolerances (component selections and toler- ances, adjustments, etc.). Delta-Time - The percent timing change (from the ATSC value) for any (2) Input voltage variation. variation of voltage and/or temperature within specified limits. Tests for Includes DC or rms voltage variations, plus instantaneous this parameter would be essentially the same as described for ATSC, voltage variations at time the control voltage is applied (AC except that any constant combination of specified voltage and tempera- only). ture extremes may be used. (3) Temperature (ambient plus self heating). (4) Input cycling conditions: Recycle Time - The length of time the control voltage must be inter- a. duration of “off” time rupted, immediately following a timing interval, to produce a subsequent b. duration of “on” time after actual time out delay of at least 95% of the reference delay under constant conditions of input voltage and ambient temperature. The reference delay may be the The terms used to define and specify time delay relay performance must ATSC value determined under standard conditions (nominal voltage and reflect one or more of these time variation factors with sufficient clarity 25°C); however, any constant voltage-temperature combination within that both the manufacturer and the user may arrive at essentially the same specifications may be used (must be the same voltage-temperature evaluation of device performance. To this end, the following terms and combination as used for recycle checks). definitions are used. Note: If control voltage is interrupted prior to completion of a timing Specified Delay Time - The advertised (or print specified) time of the period, or at a time other than immediately following time out, the recycle delay function. time value (off time) may produce a subsequently shorter timing period, depending upon the particular design and when the interruption occurs Actual Time, Standard Conditions (ATSC) - The actual delay time of within the internal RC charging cycle. a given device operated at 25°C and nominal input voltage, with sufficient “off” time of input voltage to permit full “short term” recovery of the Correspondingly, this subsequent time delay may be from 85% to 95% timing interval. For purposes of establishing a reference ATSC it is of the reference actual delay as defined above. recommended that the device be cycled @ 25°C, nominal voltage, with input pulses of 1.3X specified delay time, with 1 sec. off times. The Timing Cycle Interrupt “Transfer” - A momentary transfer (pickup and resulting average of a group of consecutive time delay readings (excluding dropout) of the switching relay contacts which may occur if the timing the 1st, which had an unknown off time) may be used to determine ATSC. cycle is interrupted. This phenomenon is inherent in CU series time Five cycles should be considered adequate for this determination. delays; and, depending on when the timing interval is interrupted, the transfer duration may vary from zero to the release time value for that The off time required for full “short term” recovery of the timing interval device. will vary to some extent, depending on relay type, timing circuit imped- ance (normally related to length of timing period), whether capacitor Release Time - The time required, after time out, for the output switch shorting contacts are used, whether the previous timing cycle was to return to its normal, de-energized state when the control voltage is completed or interrupted during time out, and, if completed, the degree removed. This will vary to some extent with the duration of “on” time to which the input control “on” time extended beyond actual time out. after actual time out and with temperature and voltage; the shortest release time being obtained when control voltage is removed immedi- In practice, off times used may vary from a minimum approaching the ately following completion of a timing period under conditions of mini- release time of the output (50 to 200 ms typical, depending on the mum temperature and input voltage. particular design) to a second or more, with as much as 15% difference in the resulting delay times. The greatest rate of change occurs as off Transient Protection is provided so that the time delay will not be times become increasingly short, while the rate of change becomes damaged by a transient input. relatively negligible as increasingly long off times approach 1 second. However, for very long off times (measured in hours), and additional Polarity Protection is provided internally to protect the time delay of DC change in the first subsequent operation delay time may be experienced. units from reversal of input voltage. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1202 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B External Resistor Selection Guide for P&B Time Delay Relays For CL, CK & CU Series For CD Series The "minimum" time setting on an external resistor adjustable model in the The "minimum" time setting on an external resistor adjustable model in any of these series is obtained by shorting together the external resistor CD series is obtained by shorting together the external resistor terminals of the relay. The “maximum” time setting (within tolerance limits) is pre-set terminals of the relay. The “maximum” time setting (within tolerance limits) is obtained by using the resistance value listed across from the at the factory, and no external resistor is necessary. Approximate resistance values required to obtain times between the minimum and maximum time for that unit in the tables below. Timing values between the minimum and maximum limits are linear with resistance within 10%. It maximum limits can be determined using the table and graph below. It is recommended that a 1/4 watt, mimimum, resistor be used. External is recommended that a 1/4 watt, mimimum, resistor be used. External timing resistor should have less than 500 PPM temperature coefficient. timing resistor should have less than 500 PPM temperature coefficient. The external resistor value R required to obtain any time T can be 0 0 calculated using the following formula: CD Resistor Values (AC & DC Models) T – T 0 S R =R Factory-set Approximate 0 1 ( ) T – T 1 S Time Delay. Resistance* Short Circuit T = Desired Time No Resistor to Reduce Time Delay 0 T = Short Time (see relay type) (seconds) Delay by 1/2 (seconds) S T = Long Time (see relay type) 1 1.0 33K ohms 0.1 R = Extrernal Resistor Value required to obtain T 1 1 5.0 200K ohms 0.1 R = External Resistor Value required to obtain T 0 0 10.0 400K ohms 0.1 Example: Given a CUH-41-30060, find an external resistor value that will * Resistor values shown correspond to a 1.0 multiplying factor. Use the graph below to give a 30 second delay. determine other resistor values required to obtain time periods between the limits stated in the chart. Known: T = 60 seconds 1 T = 1 second S R = 1 meg 1 6 R = 1 x 10 (29) 0 59 CD Timing Resistor Curve R = 492K 0 100 Note: The actual time obtained will normally be within 5% of the desired 90 time. This is due to construction tolerance. 80 70 CL & CU Delay On Operate Resistor Values 60 Time (Sec.) Approximate Resistance 50 CU CL AC DC 40 1.0 0.1 Short Short 30 10.0 10.0 200K 160K 20 1.0 0.3 Short Short 10 30.0 30.0 600K 500K 0 1.0 0.6 Short Short 0.01 0.1 1.0 10.0 100 60.0 60.0 1.2 Meg 1.0 Meg Resistor Multiplying Factor 1.0 1.2 Short Short 120.0 120.0 2.4 Meg 2.0 Meg To obtain CD series time delay relays having a linear resistance with time, please consult the factory. CK Delay On Operate Resistor Values Time Approximate Resistance (Sec.) AC DC 0.1 Short Short 10.0 750K 750K 1.8 Short Short 180.0 1.0 Meg 910K CK Delay On Release Resistor Values Time Approximate Resistance (Sec.) AC & DC 0.1 Short 10.0 820K 0.6 Short 60.0 910K Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1203 specified. Refer to inside back cover. Percent of Maximum Time Catalog 1308242 Issued 3-03 AGASTAT AGASTAT Solid State Time Delay Terms and Definitions Accuracy, absolute (or calibration accuracy) - the deviation of a selected Load rating - the maximum current, voltage, and frequency (if AC) of the load- time delay from the actual delay, measured with reference to a time standard, circuit energy that may be switched by a TDR, for normal life expectancy. under standard conditions. Load gates - solid state circuits that perform logic "switching functions." Accuracy, "attainable" - the "worst case" deviation in time delay, from a Mode - see operating mode. selected value, including all factors that contribute to its "error budget," Noise - any unwanted signal impinging on a circuit or its environment. including long-term drift, temperature drift, resolution, calibration accuracy, line-voltage and line-frequency effects, etc. Operate time - the longest interval between energization of an output relay and the completion of contact transfer under any combination of operating Accuracy, overall - the maximum deviation from the average of 100 consecu- temperature and voltage. tive time delays at any given time setting throughout the operating tempera- ture, voltage, and frequency ranges. Operating life - a measure of the number of operations a TDR can be expected to perform within specifications; for TDRs with electromechanical (EMR) load- Accuracy, repeat - the maximum deviation from the average of 100 consecu- switching means, there are two ratings - mechanical and electrical operations tive time delays at any given time setting and any fixed combination of at full rated load. temperature and operating voltage. Operating mode - the relationship between control signal input, generation Breakdown, circuit-to-case - the voltage insulation between any part of a of delay or count, and transfer of load-switching contacts. TDR's circuitry and the frame or any other conductive part in the structure, including the case. operating voltage range - the range of voltages over which a TDR will perform to specification. May be applied to either delay generating circuits, load- breakdown, control-to-load - the voltage insulation between control and switching circuits or both. load circuits. Peak current - the maximum short-duration load-circuit rating of the load- Calibration linearity - in the mechanical calibration of a TDR delay-setting switching circuit; also called "in-rush" or "surge" current. scale, the largest deviation of the actual delay-vs-rotation curve from a straight line drawn from minimum to maximum delay. R-C timer - an electronic time-delay relay in which the charging of a capacitor (C) through a resistor (R) generated the delay and an electronic circuit Counting TDR - a TDR in which a stable source generates precisely timed establishes a threshold, or critical value, for the capacitor voltage; when this voltage pulses, and a digital counter registers a different voltage pattern or value is reached, a load-switching device is operated. code on its output terminals for each pulse counted. The counter is connected to a digital decoder, preset to recognize a given code, which then operates the Release time - the longest time interval between de-energization of an output load-switching device. relay and the complete transfer of its contacts under any combination of operating temperature and voltage. Current drain - the current drawn by the delay and switching circuits in the TDR, not including the current drawn by the load. Resettability - the precision with which a delay adjustment, once changed, can be reset. delay - an interval of time generated before some planned event is caused to occur. Reset time - the shortest allowable interval between complete or interrupted timing cycles without risk of delay error or malfunction. Delay adjustability - the capability of setting the duration of a time delay generated by a TDR; the Resolution - the precision with which delay adjustment may be set; it depends on the type of adjustment means; for example, in a switch-settable design, the Delay range and resolution - taken together, describe the adjustability. smallest change that can be made by moving one unit in the least-significant Delay adjustment - means of setting the duration of a time delay: pointer- decade in a selector switch array. knob-and scale, thumbwheel switch, external or internal potentiometer, etc. solid-state relay (SSR) - a relay in which a semiconductor device (e.g., an SCR delay range - the span of time within which a TDR can generate time delays. or TRIAC), switches the load. Dielectric withstand - the ability of insulating materials and spacings to Stability, long-term - the measure of the effect of time along on the delay withstand specified overvoltages for a specified time without flashover or generated by a TDR under specific operating conditions - e.g., the difference puncture. in the repeat accuracy between that measured when the TDR is new, and that Electromechanical relay (EMR) - a controlled switch operated by causing measured one year later. sufficient current to flow through an electromagnetic coil; the resultant Stability, temperature - the effect of ambient temperature on the delay of a magnetic field, when strong enough, overcomes a spring force and closes and/ TDR, expressed in terms of the percent deviation in a preset delay per degree or opens the switch contacts. of temperature change from some nominal value. Interface - in a TDR, one of the following: the nature of the means of adjusting TDR - time-delay relay. time delay; of indicating status of delay and load; of powering control and load Time-delay relay (TDR) - a device that upon energization or operation of a circuits, or of switching control and load circuits. control circuit, generates a delay, at the end of which some planned event (e.g., Isolation, control-to-load - the degree to which interaction has been pre- load switching, or secondary control function) is caused to occur. vented between control and load circuits in a TDR usually expressed as the Timing diagram or timing ladder - a graphic representation of two or more effective impedance between them. sequences of events, all drawn to the same horizontal time scale, so that any Leakage current - the current conducted by a solid state switching device in point in one sequence occurs at the same time as any point directly above or an "off" state. below it in another sequence. LED readout - a numerical display made up of light-emitting diodes (solid state Timing range - the range of time intervals over which a particular TDR will devices that glow when current is passed through them). generate delays. linearity - the regularity of calibration of a delay scale - i.e., the uniformity of the Transfer - the switching of a relay's contacts from one state to the other, but spacing equal delay increments. In a TDR with externally controlled delay, the in the past tense commonly used to denote the position of the contacts in the constancy of the delay-to-resistance ration. relay's energized or "transferred" state as opposed to its de-energized or Line-frequency sensitivity - the deviation in delay, at any setting within "normal" state. specifications, per hertz or percent of line-frequency change from the nominal Transient protection or transient suppression - the prevention of malfunc- value, measured at specified line voltage and ambient temperature. tion of a TDR due to power-line transients, or the means of doing so. Usually Line-voltage sensitivity - the deviation in delay, at any setting within effective only over a stated range or up to a stated maximum transient specification, per volt or percent of line-voltage change from the nominal value, amplitude and duration. measured at specified line voltage and ambient temperature. Transient voltage tolerance - the largest momentary overvoltage peak that Load-dependent delay - the characteristic of certain TDR's in which there is a TDR will withstand without damage or catastrophic malfunction. a significant change, due to internal heating, of a preset delay interval, following a long "load-ON" period. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1204 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT AGASTAT Time Delay Relay Timing Modes On-Delay: Time delay is initiated upon application of a control signal (i.e., On-Delay / Off-Delay: Time delay is initiated for delay 1 upon closure of the operating voltage or on 11-pin model closure of the control switch). The output control switch, for delay 2 upon opening of the control switch. (Operating contacts energize at the end of the delay. Output contacts and the time delay voltage is applied continuously.) Output contacts energize at the end of time circuit reset upon removal of the control signal regardless of state. delay 1, and de-energize at the end of time delay 2. If the control state is reversed during the time delay, the time delay circuit automatically resets to zero. Note: For the 48K series, time delays 1 and 2 are identical. ON / CLOSED OPERATING VOLTAGE/ CONTROL SWITCH ON OFF / OPEN OPERATING VOLTAGE ENERGIZED OFF OUTPUT DELAY CONTACTS CLOSED DE-ENER. CONTROL SWITCH OPEN Off-Delay: The output contacts energize when the control switch is closed. ENERGIZED The time delay is initiated upon opening of the control switch (operating DELAY 1 OUTPUT voltage is applied continuously). De-energization occurs at the end of the CONTACTS DELAY 2 delay. Output contacts energize and the time delay circuit resets upon closure DE-ENER. of the control switch. Repeat Cycle: Application of the operating voltage starts time delay 1. Upon ON OPERATING expiration of this delay, the output contacts energize. Time delay 2 begins VOLTAGE simultaneously. At the end of time delay 2, the output contacts de-energize, OFF and a new cycle begins. The cycles continue until power is removed. To reset CLOSED the timer, input voltage must be removed. The state of the output contacts CONTROL may be reversed on the 11-pin 48K by closing the control switch. Note: For the SWITCH OPEN 48K series, the time delays are identical. ENERGIZED OUTPUT ON DELAY CONTACTS OPERATING DE-ENER. VOLTAGE OFF ENERGIZED DELAY DELAY Interval: Time delay is initiated upon application of a control signal (i.e., 1 1 OUTPUT CONTACTS DELAY DELAY operating voltage or closure of the control switch on 11-pin models). The 2 2 DE-ENER. output contacts energize when the control signal is applied. At the end of the delay, the output contacts de-energize. Output contacts and the time delay circuit reset upon removal of the control signal regardless of state. Accumulating On-Delay: Time delay is initiated upon closure of the control switch. (Operating voltage is applied continuously.) Energization of the output contacts occurs at the end of the delay. If the control switch is opened during ON / CLOSED the time delay, the time delay pauses, and the relay holds (remembers) the OPERATING VOLTAGE/ CONTROL SWITCH delay accumulated so far. The time delay resumes when the control switch OFF / OPEN is re-closed. After energization, reset by opening the control switch. Regard- less of state, reset by removing the operating voltage. ENERGIZED OUTPUT DELAY ON CONTACTS OPERATING DE-ENER. VOLTAGE OFF CLOSED CONTROL On / Interval : Time delay 1 is initiated upon application of a control signal (i.e., SWITCH operating voltage or closure of the control switch on 11-pin models). The OPEN output contacts energize at the end of time delay 1 and de-energize at the end ENERGIZED of time delay 2. Output contacts and the time delay circuit reset upon removal OUTPUT of the control signal regardless of state. Note: For the 48K series, delay 2 is CONTACTS fixed at 0.5 seconds. DE-ENER. DELAY ACCUMULATION ON / CLOSED OPERATING VOLTAGE/ One Shot (Latching Interval): Operating voltage must be applied continu- CONTROL SWITCH ously. Output contacts energize and time delay is initiated upon closure of the OFF / OPEN control switch. Once closed, state of control switch has no further influence ENERGIZED until time delay has expired. Upon expiration of time delay, output contacts de- OUTPUT energize and timer is reset by opening the control switch. CONTACTS DELAY 1 DELAY 2 DE-ENER. ON OPERATING VOLTAGE OFF CLOSED OFF AT CONTROL ANY TIME SWITCH OPEN Note: When an external control switch is used, it must be closed before the unit is energized. If external ENERGIZED control switch is open, the unit will not time out. OUTPUT DELAY CONTACTS DE-ENER. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1205 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Accessories for AGASTAT Solid State Time Delay Relays Sockets BDS08SS Socket • 8-pin octal socket • DIN rail or panel mount • Rated 10A @ 300VAC • #6-32 screws w/captive clamp plates • File E140494 • File LR29523M37 BDS11SS Socket • 11-pin octal-type socket • DIN rail or panel mount • Rated 10A @ 300VAC • #6-32 screws w/captive clamp plates • File E140494 • File LR29523M37 BCSF11SC Socket • Use with SCF series timer • 11-pin octal-type socket • DIN rail or panel mount • Rated 10A @ 380VAC • M3 screws w/captive clamp plates • File E140494 • File LR29523M37 BDT11SS Socket • 11-pin tab socket • DIN rail or panel mount • Rated 10A @ 300VAC • #6-32 screws w/captive clamp plates • File E140494 • File LR29523M37 External Potentiometer Time Range Ohms (±10%) .1 to 3 sec. 333.3K/sec. POT1MV External Potentiometer .1 to 10 sec. 100.0K/sec. Time adjustment by extermal potentiometer or fixed resistor for series SCB, SCC,SSC, .5 to 15 sec. 66.7K/sec. STA, VTM-1, VTM1, VTM2, VTM3, VTM4 & VTM7. (Potentiomter or resistor furnished 1 to 30 sec. 33.3K/sec. by customer.) 2 to 60 sec. 16.7K/sec. Minimum time is obtained with zero resistance. Longer time is obtained by adding resistance specified at right for each second, hour or cycle above the minimum. 4 to 120 sec. 8.3K/sec. Alternatively, an external 1 megohm potiometer may be used. 6 to 180 sec. 5.6K/sec. 10 to 300 sec. 3.3K/sec. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1206 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B 3RP1 series Multifunction Solid State DIN Mount Time Delay Relay • Available as SPDT or DPDT • 15 time setting ranges • .05s - 100hr programmable timing range • Universal 24-240 VAC/VDC or fixed input types. • 3A switching current rating • Fits 35mm DIN track • Single function, Delay-On available VDE Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Standards and Specifications Contact Data @ 25°C • IEC 721-3-3 "Ambient conditions" Arrangements: 1 Form C (SPDT). • IEC 61812-1/DIN VDE 0435 Part 2021 "Solid State Relays, Time Relays" 2 Form C (DPDT) • IEC 1000 "electromagnetic compatibility" Material: Silver tin oxide. • IEC 947-5-1: DIN VDE 0660 Part 200 "Low-voltage control circuit devices" Rating: 3A @ 250VAC. Switching Frequency: 2,500 ops./hour. Electrical Life: 200,000 operations min. at rated load. 6 Mechanical Life: 30 x 10 operations. Input Data @ 25°C Timing Specifications Voltage: Universal Input Type: 24 - 240V, 50/60 Hz. AC or DC. Timing Ranges: 0.05 to 1 / 0.15 to 3 / 0.5 to 10 / 1.5 to 30 / 5 to 100 sec.; Fixed Input Type: 24, 100-127, 200-240AC; 24VDC. 0.05 to 1 / 0.15 to 3 / 0.5 to 10 / 1.5 to 30 / 5 to 100 min.; Operating Range: AC: 85 to 110%. 0.05 to 1 / 0.15 to 3 / 0.5 to 10 / 1.5 to 30 / 5 to 100 hr. DC: 80 to 125%. Timing Adjustment: Potentiometer adjustable within selected range. Power Requirement: Tolerance: ±5% of full scale value. Universal Input Type: AC: 6VA. Reset Time: 150 ms. DC: 2W. Minimum On Period: 35 msec. Repeatability: ± 1%. Environmental Data Temperature Range: Storage: -40°C to +80°C. Operating: -25°C to +60°C. Protection Category: IP 20 according to EN 60529. Mechanical Data Timing Modes Termination: Screw terminal. See the following page for a description of timing modes. Enclosure: Plastic DIN case. Mounting: 35mm DIN track. Weight: (3RP1505) 5.29 oz. (150g) approximately. (3RP1525) 3.88 oz. (110g) approximately. Configuring L1 L1 • Changing the timer range and their functions will only be effective when they are carried out in a voltage-free state. S1 S1 S1 • Trigger input B1 or B3 must only be started when the supply voltage is applied. • The same potential must be applied to A1 and B1, or A3 and B3. With the A1 B1 A1 B1 K2 K1 K2 K1 two-voltage design, only one voltage range must be connected. A2 • The triggering of the load paralleled to the start input is not permissible N N when using AC (see adjacent diagrams). Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Input Voltage Input Contact Wiring Functions Part Type Arrang. Diagram Number DC AC 3RP1505 Multifunction 24 24, 100-127 Fixed SPDT 1 to 8 1 to 8 3RP15 05-1AQ30 24 24, 200-240 Fixed SPDT 1 to 8 1 to 8 3RP15 05-1AP30 24 24, 100-127 Fixed DPDT 9 to 24 9 to 24 3RP15 05-1BQ30 24-240 24-240 Universal DPDT 9 to 24 9 to 24 3RP15 05-1BW30 3RP1525 Delay On 24 24, 100-127 Fixed SPDT 1 1 3RP15 25-1AQ30 24 24, 200-240 Fixed SPDT 1 1 3RP15 25-1AP30 24 24, 100-127 Fixed DPDT 9 9 3RP15 25-1BQ30 24 24, 200-240 Fixed DPDT 9 9 3RP15 25-1BP30 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1207 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Outline Dimensions 3.39 3RP1505-1A, 3RP1525-1A 3RP1505-1B, 3RP1525-1B (86.0) 3.39 .19 .31 (86.0) (5.0) .19 2.36 (8.0) .31 (5.0) (60.0) (8.0) 2.36 1.18 (60.0) (30.0) 4.33 (110.0) 3.54 (90.0) 3.23 3.23 (82.0) (82.0) 2.99 4.33 (76.0) 2.44 4.72 (110.0) (62.0) 4.02 (120.0) (102.0) 2.44 (62.0) 4.72 (120.0) .59 .59 (15.0) .23 (15.0) .23 .886 .886 (6.0) (6.0) (22.5) (22.5) Wiring Diagram 1. On-Delay 2. Off-Delay 3. On and Off Delay 4. Flashing With Auxiliary Voltage With Auxiliary Voltage 3RP1505-1A 3RP1505-1A 3RP1505-1A 3RP1505-1A 3RP1525-1A AC/DC 24V AC/DC 24V AC/DC 24V AC/DC 24V AC100/127V AC100/127V AC100/127V AC100/127V AC200/240V AC200/240V AC200/240V AC200/240V A1 B1A3 B3 15 A1 B1 A3 B3 15 A1 A3 15 A1 A3 15 A2 16 18 A2 16 18 A2 16 18 A2 16 18 5. Making-Pulse Contact 6. Breaking-Pulse Contact 7. Pulse Forming 8. Additive On-Delay With Auxiliary With Auxiliary Voltage With Auxiliary Voltage Voltage and Instantaneous Contact 3RP1505-1A 3RP1505-1A 3RP1505-1A 3RP1505-1A 3RP1525-1A AC/DC 24V AC/DC 24V AC/DC 24V AC/DC 24V AC100/127V AC100/127V AC100/127V AC100/127V AC200/240V AC200/240V AC200/240V AC200/240V A1 B1A3 15 B3 A1 B1 A3 B3 15 A1 A3 15 A1 B1A3 B3 15 Σ ➝ ➝ A2 16 18 A2 16 18 A2 16 18 A2 18 16 9. On-Delay 10.Off-Delay 11.On-and Off-Delay 12.Flashing With Auxiliary Voltage With Auxiliary Voltage 3RP1505-1B 3RP1505-1B 3RP1505-1B 3RP1505-1B 3RP1525-1B AC/DC 24V AC/DC 24V AC/DC 24V AC/DC 24V AC100/127V AC100/127V AC100/127V AC100/127V AC200/240V AC200/240V AC200/240V AC200/240V A1 B1 A3 B3 15 25 A1 B1 A3 B3 15 25 A1 A3 15 25 A1 B1 A3 B3 15 25 28 26 28 A2 16 18 26 28 A2 16 18 26 A2 16 18 A2 16 18 26 28 13.Making-Pulse Contact 14.Breaking-Pulse Contact 15.Pulse Forming 16.Additive On-Delay With Auxiliary With Auxiliary Voltage With Auxiliary Voltage Voltage and Instantaneous Contact 3RP1505-1B 3RP1505-1B 3RP1505-1B 3RP1505-1B AC/DC 24V AC/DC 24V AC/DC 24V AC/DC 24V AC100/127V AC100/127V AC100/127V AC100/127V AC200/240V AC200/240V AC200/240V AC200/240V A1 A3 25 15 15 A1 B1 A3 B3 15 25 A1 B1 A3 B3 15 25 A1 B1 A3 B3 21 Σ ➝ ➝ ➝ ➝ 24 A2 16 18 26 28 A2 18 28 28 A2 16 18 22 16 26 A2 16 18 26 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1208 specified. Refer to inside back cover. ➝ ➝ ➝ Catalog 1308242 Issued 3-03 P&B Wiring Diagrams (continued) 17.On-Delay and 18.Off-Delay 19.On and Off Delay 20.Flashing and Instantaneous Contact With Auxiliary Voltage and With Auxiliary Voltage and Instantaneous Contact Instantaneous Contact Instantaneous Contact 3RP1505-1B 3RP1505-1B 3RP1505-1B 3RP1505-1B AC/DC 24V AC/DC 24V AC/DC 24V AC/DC 24V AC100/127V AC100/127V AC100/127V AC100/127V AC200/240V AC200/240V AC200/240V AC200/240V 15 A1 B1 A3 B3 15 21 A1 A3 15 21 A1 B1 A3 B3 21 A1 A3 15 21 24 A2 16 18 22 24 A2 16 18 22 24 A2 16 18 22 A2 16 18 22 24 21.Making-Pulse Contact and 22.Breaking-Pulse Contact 23.Pulse Forming With 24.Star-Delta Function Instantaneous Contact With Auxiliary Voltage and Auxiliary Voltage and Instantaneous Contact Instantaneous Contact 3RP1505-1B 3RP1505-1B 3RP1505-1B 3RP1505-1B AC/DC 24V AC/DC 24V AC/DC 24V AC/DC 24V AC100/127V AC100/127V AC100/127V AC100/127V AC200/240V AC200/240V AC200/240V AC200/240V A1 A3 17 27 A1 A3 15 21 A1 B1 A3 B3 15 21 A1 B1 A3 B3 15 21 ➝ ➝ A2 24 A2 24 A2 22 24 A2 Y18 28 16 18 22 16 18 22 16 18 Timing Function Descriptions and Settings 3RP1505-1A 3RP1505-1B 1. On Delay 5. Impulse On 9. On Delay 13. Impulse On 17. On Delay 21. Impulse On A./A2 A./A2 A./A2 A./A2 A./A2 A./A2 15/18 15/18 15/18 15/18 15/18 15/18 15/16 15/16 15/16 15/16 15/16 15/16 t t t t t t 25/28 25/28 21/24 21/24 25/26 25/26 21/22 21/22 2. Off Delay 6. Impulse Off 10. Off Delay 14. Impulse Off 18. Off Delay 22. Impulse Off A./A2 A./A2 A./A2 A./A2 A./A2 A./A2 > _ > > 35ms > _ _ > _ > _ 35ms 35ms _ 35ms 35ms 35ms B./A2 B./A2 B./A2 B./A2 B./A2 B./A2 15/18 15/18 15/18 15/18 15/18 15/18 15/16 15/16 15/16 15/16 15/16 15/16 t t t t t t 25/28 25/28 21/24 21/24 25/26 25/26 21/22 21/22 3. On/Off Delay 7. Pulse Shaping 11. On/Off Delay 15. Pulse Shaping 19. On/Off Delay 23. Pulse Shaping A./A2 A./A2 A./A2 A./A2 A./A2 A./A2 > _ > _ > 35ms 35ms _ 35ms B./A2 B./A2 B./A2 B./A2 B./A2 B./A2 15/18 15/18 15/18 15/18 15/18 15/18 15/16 15/16 15/16 15/16 15/16 15/16 t t t t t t t t t 25/28 25/28 21/24 21/24 25/26 25/26 21/22 21/22 4. Flasher 8. Cumulative On Delay 12. Flasher 16. Cumulative On Delay 20. Flasher 24. Star/Delta A./A2 A./A2 A./A2 A./A2 A./A2 A./A2 t t 2 2 t t t t 1 3 1 3 15/18 15/18 15/18 17/18 B./A2 B./A2 15/16 15/16 15/16 27/28 t t t t t t 15/18 15/18 t 15/16 25/28 21/24 50ms 15/16 25/26 21/22 Σt Σt 22/24 21/22 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1209 specified. Refer to inside back cover. ∇ ➝ Catalog 1308242 Issued 3-03 AGASTAT NOTE: This product is scheduled to soon be discontinued. Suggested alternatives are the P&B CNT, CNS and 48K series CNM5 series time delay relays. Programmable Time Delay Relay • Up to 8 user-programmable timing modes • 0.1 sec. to 10 hr. programmable timing range • Socket or panel mount (1/16 DIN enclosure) • Universal (24-240VAC/24-125VDC) and fixed input types • 10A output relay with DPDT contacts • Two LED indicators on universal input types • ANSI C37.90 transient protection on universal input types File E60363 File LR29186 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Initial Dielectric Strength Modes are user selectable via rotary selector switch (shown above) or Between Coil, Contacts and Case: 1,500VAC. screwdriver adjustment on optional recessed knob equipped models that are available on a special order basis for tamper-resistant requirements. Modes offered on specific models are: Input Data @ 25°C 48K91U: On-Delay, Off-Delay, Interval, On/Interval, One Shot, Repeat Cycle, On-Delay/Off-Delay, Accumulating On. Voltage: 48K90U & 48K91U: 24 - 240VAC, 50/60 Hz. and 24-125VDC. 48K90U: On-Delay, Interval, On/Interval, Repeat Cycle. 48K01A: 120VAC, 50/60 Hz. 48K01A: On-Delay. Power Requirement: 2W, max. Transient Protection: 48K90U & 48K91U: Meets ANSI C37.90 Transient Specification. Timing Specifications 48K01A: 2,500V for 1ms. Timing Ranges: 0.1 to 1 / 1 to 10 / 10 to 100 sec.; 1 to 10 / 10 to 100 min.; 1 to 10 hr. Timing Adjustment: Potentiometer adjustment with linear reference Environmental Data calibrations. Recessed dial option is available on a special order basis for Temperature Range: Storage: -25°C to +85°C. tamper-resistant requirements. Operating: -25°C to +60°C. Accuracy: Repeat Accuracy: ±0.5% ±0.02 sec. Overall Accuracy: ±1% ±0.02 sec. Reset Time: 25 ms. Mechanical Data Relay Operate Time: 50 ms. Termination: 8 or 11-pin octal style plug. Relay Release Time: 50 ms. Enclosure: Grey plastic 1/16 DIN case for socket or panel mounting. Indicating LEDs: 48K90U & 48K91U: Power On LED & Output Contacts LED (Typically Contact Data @ 25°C flashes when timing, stays on when output relay is Arrangements: 2 Form C (DPDT). energized.) Rating: 10A @ 30VDC or 120/240VAC, resistive. 48K01A: Output Contacts LED Expected Mechanical Life: 10 million operations. Sockets: Fits either 27E123 or 27E892 (snap-on) screw terminal sockets. Expected Electrical Life: 100,000 operations, min., at rated load. Weight: 5 oz. (142g) approximately. Ordering Information – Authorized distributors are likely to stock boldface part numbers listed below. Part Number Timing Modes Operating Voltage Termination Pins 48K01AS One - On-Delay 120VAC 50/60 Hz. 8 48K90US Four - On-Delay, Interval, On/Interval, Repeat Cycle Universal (24-240VAC, 50/60 Hz. or 24-125VDC) 8 48K91US Eight - On-Delay, Off-Delay, Interval, On/Interval, One Shot, Universal (24-240VAC, 50/60 Hz. or 24-125VDC) 11 Repeat Cycle, On-Delay/Off-Delay, Accumulating On Ordering Note: The part numbers listed above are standard products with knobs for adjustment of mode, range and timing. On a special order basis other models are available with recessed dials requiring a screwdriver for adjustment. On the special order versions, the "S" part number suffix is replaced by an "R" suffix. Consult factory for availability of special order models. Outline Dimensions Wiring Diagrams (Bottom Views) (pins numbered clockwise from keyway) 1.89 (48.0) Max. 48K90US 48K91US 1.89 48K01AS (48.0) Max. (dotted line represents internal connection) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com Technical support: reference purposes only. (millimeters) unless otherwise subject to change. 1210 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CNT series Multifunction, Digital Time Delay Relay/Counter • 10 programmable timing modes + 2 counting modes • 0.1 sec. to 9,990 hr. programmable timing range • 1 to 99,900 counting range • LCD digital display • Universal (24-240VAC/VDC) and fixed input types • 10A output relay with DPDT contacts • Thumbwheel switches for programming File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing and Counting Modes Input Data @ 25°C See the following page for a complete description of all program- Voltage: Universal Input Type: 24 - 240V ±15%, 50/60 Hz. AC or DC. Fixed Input Types: 120VAC ±15%, 50/60 Hz and 12VDC. mable timing and counting modes. Power Requirement: Universal Input Type: 10VA @ 240VAC; 5VA @ 120VAC; 1VA @ 24VAC. Timing Specifications 10W @ 240VDC; 5W @ 120VDC; 1W @ 24VDC. Timing Ranges: 0.1 to 99.9 / 1 to 999 sec.; 0.1 to 99.9 / 1 to 999 min.; Fixed Input Types: 3VA @ 120VAC; 3W @ 12VDC. 0.1 to 99.9 / 1 to 999 / 10 to 9,990 hr. Transient Protection: Yes. Timing Adjustment: Digital adjustment via thumbwheel switches. Reverse Voltage Protection: Yes. Tolerance: ±0.5% ±0.05 sec. Delta Time (for AC units add ±1 cycle 60 Hz.): ±0.1% ±0.05 sec. Input Voltages & Limits @ 25°C Repeatability (Including first cycle of operation.): ±0.1% ±0.05 sec. Input Nominal Minimum Maximum Reset Time (power interruption): 45 ms, typ.; 60 ms, max. Type Voltage Voltage Voltage Minimum Pulse Width, Control: 50 ms. Recycle Time: 45 ms, typ.; 60 ms, max. Universal 24-240VAC/VDC 20.4VAC/VDC 276VAC/VDC Fixed 120VAC 102VAC 138VAC Counting Specifications 12VDC 10.2VDC 13.8VDC Maximum Count: 1 to 999; 10 to 9,990 (÷10); 100 to 99,900 (÷100). Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). Maximum Count Rate: 100 counts per second. AC models will operate on 50 or 60 Hz. Mimumum Pulse Width:Count (Control): 3 ms.; Reset: 3 ms. Available Counting Functions: Operate at preset count and release at Environmental Data preset count. Temperature Range: Storage: -20°C to +70°C. Contact Data @ 25°C Operating: -10°C to +55°C. Humidity: 85% relative humidity, non-condensing. Arrangements: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Mechanical Data Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Termination: 11-pin octal style plug. Expected Mechanical Life: 10 million operations. Enclosure: Beige plastic 1/16 DIN case. Expected Electrical Life: 100,000 operations, min., at rated load. Sockets: Fits either 27E123 or 27E892 (snap-on) screw terminal sockets. Weight: 4.3 oz. (122g) approximately. Initial Dielectric Strength External Control: CONTROL, RESET: Active on contact closure or solid Between Open Contacts: 1,000V rms, 60 Hz. state switch closure to RETURN, 0-1.0VDC maximum Between All Other Conductors: 1,500V rms, 60Hz. voltage level (see wiring diagrams for interface circuits. Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Universal Input Model Accessories Part Number Name Description Input Voltage Part Number SSA-24C667 Mounting Clip Ratchet-fit clip slides onto CNT from behind 24-240VAC/VDC CNT-35-96 to secure CNT in panel mount applications. Fixed Input Models SSA-24C668 Protective Cover Clear, flexible cover slips snugly over bezel of Input Voltage Part Number CNT to help protect against dust and moisture. Durable cover also helps prevent inadvertant 12VDC CNT-35-26 changes of programming switch settings. 120VAC CNT-35-76 Outline Dimensions Wiring Diagrams (Bottom Views) (pins numbered clockwise from keyway) 1.88 2.83 EXTERNAL CONTROL SWITCHES** (47.8) (71.9) RESET .32 CONTROL (8.1) CONTROL (COUNT) RETURN RETURN RESET O NC N USE SAME 1.88 1.76 FOR RESET (47.8) (44.7) 111 A 1 1 1 H 111 INPUT* _ _ + + INPUT* * Note: Input polarity for DC operation. For most reliable operation on AC, connect high side .64 to “+” and low side to “–”. (16.3) ** Important: A dry circuit switch is recommended. A “dry circuit” switch is one rated to Fits 1.77 x 1.77 (45 x 45) 3.15 reliably switch currents of less than 50mA. Use of a switch rated for other Panel cutout (80.0) than dry circuit may result in failure of the time delay relay to function properly. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1211 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Protective Cover & Mounting Clip Dimensions SSA-24C668 SSA-24C667 Protective Cover Mounting Clip 1.99 .40 (50.5) (10.2) “A ” 2.283 1.970 (58.0) (50.0) 2.047 1.99 (52.0) (50.5) .591 (15.0) 1.654 Section "A-A" (42.0) “A 1.890 ” (48.0) Programming Switch Diagram With this setting, the relay would operate after a delay period of 214 seconds. A 214 S Function Select: Timer Mode: A = Delay On Operate E = Recycle I = Pulse B = Delay On Release F = Single Cycle J = Cumulative Delay On Operate C = Interval On G = Control On-Off Interval On D = Control-Off Interval On H = Control On-Off Delay Counter Mode: B = Divide by 10 C = Divide by 100 A & D-J = Normal Count Time/Counter Setting: 001 to 999 Time Base/Counter Mode Select: Time Base: .1S = 0.1 to 99.9 Sec. .1M = 0.1 to 99.9 Min. .1H = 0.1 to 99.9 Hrs. 10H =10 to 9990 Hrs. S = 1 to 999 Sec. M = 1 to 999 Min. H = 1 to 999 Hrs. Counter Mode: CO = Operate at Preset Count CR = Release at Preset Count Timer Function Descriptions started by momentary CONTROL input or power-on with CONTROL A . Delay On Operate Output relay turned on at end of programmed time interval which is started on. Relay stays on for equal time interval, then turns off. RESET terminates timing and turns relay off. Turning RESET off does not restart by CONTROL input or power-on with CONTROL on. Relay turned off by RESET input until next cycle is started. With CONTROL on, turning RESET timing. off restarts timing G. Control On-Off Interval On (Watch Dog Timer) B. Delay On Release Output relay turned on and programmed time interval started or restarted Output relay turned on with CONTROL input and remains on for programmed by change of CONTROL input. RESET turns relay off and stops timing. Turning RESET off does not restart timing. time interval following removal of CONTROL. During time interval after release of CONTROL, RESET turns relay off until cycle restarted with H. Control On-Off Delay reapplication of CONTROL. With CONTROL on, relay is held off while Output relay turned on at end of programmed timing interval which is RESET is activated. started or restarted by change of CONTROL input. If relay is on, turn-off C. Interval On of relay occurs at end of programmed time interval which is started or restarted by change of CONTROL input. RESET turns relay off and stops Output relay turned on for programmed time interval by CONTROL or power- on with CONTROL on. RESET turns relay off until next cycle is started, and timing. Turning RESET off does not restart timing. does not restart timing when RESET is removed. I. Pulse D. Control-Off Interval On Output relay turned on at end of programmed time interval, which is Output relay turned on for programmed time interval by turn-off of CON- started by CONTROL input, for 0.5 second duration, and continues in pulsed mode at programmed time interval with fixed 0.5 second on-time. TROL. RESET turns relay off until next cycle is started, and does not restart timing when RESET is removed. Turning CONTROL off turns relay off and stops timing. RESET turns relay off and inhibits operation. With CONTROL on, removal of RESET restarts E. Recycle timing. Output relay turned on at end of programmed time interval which is started J. Cumulative Delay On Operate by momentary CONTROL input or power-on with CONTROL on. Relay stays Output relay turned on at completion of total accumulate CONTROL input on for equal time interval, then turns off and cycle is repeated on a free- running basis until terminated by momentary RESET, turning relay off. With duration equal to programmed time. Turning CONTROL off before accumulation of programmed time results in measured time total being CONTROL on, turning RESET off restarts cycle. held until CONTROL is again turned on and total programmed time value F. Single Cycle is reached. RESET input resets time value to zero and turns relay off if Output relay turned on at end of programmed time interval which is energized. Turning RESET off restarts timing if CONTROL is on. Counter Function Descriptions CO – Operate at Preset Count – Normal Mode CR – Release at Preset Count – Normal Mode After initializing by momentary activation of RESET input, each on/off signal Initializing by momentary activation of RESET input turns relay on. Operation at COUNT (CONTROL) input increments displayed count in upcounting is similar to CO (Operate at Preset Count) except relay turns off at a preset manner from initial 000 value until preset count, set by thumbwheel count. switches, is reached and output relay turns on. Additional inputs continue to increment displayed count. Continued counting past maximum count (999) CO or CR – Divide-by-10 Mode results in a “wrap-around” effect to 000, followed by contrinued up-counting. Operation is as described previously, except count is incremented for every Activation of RESET input turns relay off and resets count to zero. 10 on/off input signals for a maximum presettable count of 9,990. CO or CR – Divide-by-100 Mode Operation is as described previously, except count is incremented for every 100 on/off input signals for a maximum presettable count of 99,900. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1212 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CNS series Multifunction Time Delay Relay • 8 programmable timing modes (4 on 8-pin models) • 0.1 sec. to 100 min. programmable timing range • Universal (24-240VAC/VDC) and fixed input types • 10A output relay with DPDT contacts • DIP switch selection of timing mode and range • Knob and dial scale for setting actual delay time File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Input Data @ 25°C See the following page for a complete description of timing modes. Voltage: Universal Input Type: 24 - 240V ±15%, 50/60 Hz. AC or DC. Fixed Input Type: 120VAC ±15%, 50/60 Hz. Power Requirement: Universal Input Type: 10VA @ 240VAC; 5VA @ 120VAC; 1VA @ 24VAC. Timing Specifications 10W @ 240VDC; 5W @ 120VDC; 1W @ 24VDC. Timing Ranges: 0.1 to 1.0 / 1.0 to 10 / 10 to 100 sec.; Fixed Input Type: 3VA @ 120VAC. 0.1 to 1.0 / 1.0 to 10 / 10 to 100 min. Transient Protection: Yes. Timing Adjustment: Knob adjustable within selected range. Reverse Voltage Protection: Yes. Tolerance: –0, +20% of max. specified at high end of timing range; min. Input Voltages and Limits @ 25°C specified, or less, at low end. Delta Time (for AC units add ±1 cycle 60 Hz.): ±10%. Input Nominal Minimum Maximum Repeatability (Including first cycle of operation.): ±2% (for AC units add Type Voltage Voltage Voltage ±1 cycle 60 Hz.). Universal 24-240VAC/VDC 20.4VAC/VDC 276VAC/VDC Reset Time (power interruption): 45 ms, typ.; 60 ms, max. Fixed 120VAC 102VAC 138VAC Minimum Pulse Width, Control: 50 ms. Recycle Time: 45 ms, typ.; 60 ms, max. Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. Contact Data @ 25°C Environmental Data Temperature Range: Storage: -20°C to +70°C. Arrangements: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Operating: -10°C to +55°C. Humidity: 85% relative humidity, non-condensing. Rating: 10 A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Mechanical Data Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. Termination: 8- or 11-pin octal style plug. Enclosure: Beige plastic 1/16 DIN case. Dial scale provided for knob adjustment reference. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) Initial Dielectric Strength screw terminal sockets. 11-pin types fit either 27E123 or Between Open Contacts: 1,000V rms, 60 Hz. 27E892 (snap-on) screw terminal sockets. Between All Other Conductors: 1,500V rms, 60 Hz. Weight: 4.3 oz. (122g) approximately. Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Universal Input Models Accessory Input Voltage Timing Functions No. of Pins Wiring Dia. Part Number Part Number Name Description 24-240VAC/VDC 4 8 1 CNS-35-92 SSA-24C667 Mounting Clip Ratchet-fit clip slides onto CNS from behind 24-240VAC/VDC 8 11 2 CNS-35-96 to secure CNS in panel mount applications. Fixed Input Models Input Voltage Timing Functions No. of Pins Wiring Dia. Part Number 120VAC 4 8 1 CNS-35-72 120VAC 8 11 2 CNS-35-76 Outline Dimensions Wiring Diagrams (Bottom Views) (pins numbered clockwise from keyway) .65 2.83 1.88 (16.5) (47.8) (71.9) \ .32 (8.1) 1 8 1 11 EXTERNAL INPUT* INPUT* +– 1.88 1.76 +– CONTROL (47.8) (44.7) SWITCH** * Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to “+” and low side to “–”. ** Important: A dry circuit switch is recommended. A “dry circuit” switch is one rated to .64 reliably switch currents of less than 50mA. Use of a switch rated for other than (16.3) dry circuit may result in failure of the time delay relay to function properly. Fits 1.77 x 1.77 (45 x 45) 3.15 Panel Cutout (80.0) The dotted lines shown between pins on 11-pin diagram indicate internal connections. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1213 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Mounting Clip Dimensions SSA-24C667 Mouting Clip 2.283 1.970 (58.0) (50.0) 2.047 (52.0) .591 (15.0) 1.654 (42.0) 1.890 (48.0) DIP Switch Layout Timing Range Switch Settings DIP Switch Timing Range DIP Switch Timing Range On Setting Setting 0.1 - 1.0 Second 0.1 - 1.0 Minute 567 567 1.0 - 10 Seconds 1.0 - 10 Minutes 1234567 567 567 Function Time 10 - 100 Seconds 10 - 100 Minutes Setting Setting 567 567 Note: The solid black blocks in the DIP switch diagrams indicate the switch positions. For example, all the switches are “off” in the diagram above. Timing Function Descriptions and Switch Settings 8 Or 11 Pin 11 Pin Only Delay on Operate Delay on Release 1 2 3 4 1 2 3 4 72 & 92 - Output relay is energized at the completion of the time interval which is initiated 76 & 96 - Output relay is energized by the closing of the control switch with the input applied by the application of input voltage. or the application of input voltage with the control switch already closed. The time interval will 76 & 96 - Same as the above except, closing the control switch after time out will de- be initiated by the opening of the control switch with the relay de-energizing at the completion energize the relay and reset the timer. Opening the switch will initiate another time interval. of the time interval. Closing the control switch after time out will energize the relay in Closing the control switch during timing will reset the time to zero and inhibit timing until preparation for another time interval. Closing the control switch during timing will reset the opened again. time to zero and inhibit timing until opened again. Inverted Delay on Release Interval On (Input Controlled) 1 2 3 4 72 & 92 - No Time Delay - Instantly On 1 2 3 4 76 & 96 - Output relay will energize with the application of the input voltage when the control switch is open. Control switch closing will de-energize the relay. A timing interval will 72 & 92 - Output relay is energized by the application of input voltage. The time interval is be initiated with the opening of the control switch, at the completion of which the relay initiated at the same time with the relay de-energizing at the completion of the time interval. willenergize. With the control switch closed upon application of input voltage, the relay will 76 & 96 - Same as above. Closing the control switch will have no effect on timing or the wait until the control switch is opened to initiate a time interval after which the relay will state of the relay. energize. Closing of the control switch during timing will reset the time to zero and inhibit timing until opened again. Interval On (Switch Controlled) Recycler (Initially Off) 1 2 3 4 1 2 3 4 76 & 96 - Output relay is energized by the application of input voltage with the control switch closed or the closing of the control switch with the input applied. Immediately upon either, 72 & 92 - Output relay will begin cycling at a 50% duty cycle with the application of input timing is initiated with the relay de-energizing at the completion of the time interval. Closing the power. The initial state of the relay will be de-energized. control switch after time out will reset the timer, energize the relay, and initiate another time 76 & 96 - Same as the above except, closing the control switch will de-energize the relay interval. Closing the control switch during timing will have no effect on timing or the state of the and inhibit timing until it is once again opened, at which time it will start from zero time. relay. Interval Off Recycler (Initially On) 1 2 3 4 76 & 96 - Output relay will initially be energized with the application of the input voltage when 1 2 3 4 the control switch is open. Control switch closing will de-energize the relay and start a time 72 & 92 - Output relay will begin cycling at a 50% duty cycle with the application of input interval. At the completion of the time interval, the relay will energize. With the control switch power. The initial state of the relay will be energized. closed upon application of input voltage, a time interval will be initiated after which the relay will 76 & 96 - Same as the above except, closing the control switch will energize the relay and energize. Closing of the control switch during timing will have no effect on timing or the state inhibit timing until it is once again opened, at which time it will start from zero time. of the relay. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1214 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CNM5 series Multifunction Time Delay Relay For Plug-In or Panel Mounting • Five timing functions selectable via rotary switch • 0.1 sec. to 9,990 hr. timing range • Fixed input type (120VAC ± 15%) • 10A output relay with DPDT contacts • 1/16 DIN style enclosure with 11-pin plug-in base • Thumbwheel switches for programming delay time File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Functions Initial Dielectric Strength See the following page for a complete description of timing functions. Between Output Poles: 1,500V rms, 60 Hz. Between Input and Output: 1,500V rms, 60Hz. Input Data @ 25°C Timing Specifications Voltage: 120VAC ±15%, 60 Hz. Timing Ranges: 0.1 to 99.9 / 1 to 999 sec.; Power Requirement: 3VA @ 120VAC. 0.1 to 99.9 / 1 to 999 min.; Transient Protection: 13 Joule MOV. 0.1 to 99.9 / 1 to 999 / 10 to 9,990 hr. Input Voltage & Limits Timing Adjustment: Digital adjustment via thumbwheel switches. Tolerance: ±0.05% ±0.04 sec.* Nominal Minimum Maximum Repeatability (Including first cycle of operation.): < ±0.05% ±0.04 sec.* Voltage Voltage Voltage Reset Time (power interruption): 45 ms, typ.; 60 ms, max. 120VAC 102VAC 138VAC Minimum Pulse Width, Control: 50 ms. * Timing is synchronized with input voltage frequency. Accuracy is dependent on input Environmental Data voltage frequency. Tolerance shows maximum variation from utility companies. Temperature Range: Storage: -40°C to +85°C. Operating: -10°C to +55°C. Contact Data @ 25°C Humidity: 85% relative humidity, non-condensing. Arrangement: 2 Form C (DPDT). Mechanical Data Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; Termination: 11-pin octal style plug. 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Enclosure: Black plastic 1/16 DIN (48mm x 48mm) case. Expected Mechanical Life: 10 million operations. Sockets: Fits either 27E123 or 27E892 (snap-on) screw terminal sockets. Expected Electrical Life: 100,000 operations, min., at rated load. Weight: 4.3 oz. (122g) approximate. Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Time Delay Relay Accessory Input Voltage Part Number Part Number Name Description 120VAC CNM5 SSA-24C667 Mounting Clip Ratchet-fit clip slides onto CNM5 from behind to secure CNM5 in panel mount applications. Outline Dimensions Mounting Clip Dimensions 1.88 2.83 SSA-24C667 (47.8) (71.9) .32 Mounting Clip (8.1) 1.970 1.88 2.283 1.76 (47.8) (58.0) (50.0) (44.7) 2 S 3 1 2.047 (52.0) .64 .591 (16.3) .560 3.15 (15.0) (14.2) (80.0) 1.654 Fits 1.77 x 1.77 (45 x 45) panel cutout. (42.0) 1.890 Wiring Diagrams (Bottom Views) (48.0) (pins numbered clockwise from keyway) Optional Solid State Input Interface EXTERNAL CONTROL SWITCH** CONTROL 111 111 INPUT INPUT **Important: A dry circuit switch is recommended. A "dry circuit" switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1215 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Timer Function Descriptions Repeat: Output relay is turned on at end of programmed time interval which is started by application of input power. Relay stays on for equal time interval, then turns off and cycle is repeated on a free-running basis with equal on and off times until terminated by removal of input power. LED is flashing when output relay is off and on continuously when the relay is on. Applying CONTROL input during LED to show time status. timing will have no effect on timing or the state of the relay. See functional explanation for details. One Shot: Output relay is turned on by applying CONTROL input with input voltage present or application of input voltage with the CONTROL input on. REPEAT Immediately upon either, timing is initiated with the output relay turning off at the ONE SHOT OFF DELAY completion of the selected time interval. Applying CONTROL input after time out INTERVAL will reset the timer, turn on the output relay and initiate another time interval. LED ON DELAY is on continuously when output relay is off and flashes when the relay is on. Applying CONTROL input during timing will have no effect on timing or the state of the relay. Off Delay: Output relay is turned on by applying CONTROL input with input voltage present or application of input voltage with the CONTROL input on. The time interval will be started by removing the CONTROL input with the output relay 3 1 2 S turning off at completion of the time interval. Reapplying the CONTROL during timing will reset the time to zero and inhibit timing until removed. LED is off when CONTROL input is on, flashing during timing and on continuously when the output relay is off. TIME TIME SET 000 TO 999 BASE Interval: Output relay is turned on for a programmed time interval by applying input voltage. LED flashes when output relay is on and is on continuously when the output relay is off. Applying CONTROL input will have no effect on timing or the state of the relay. Time Base: .1 S = 1/10 Seconds Timing Range 0.1 to 99.9 Seconds On Delay: Output relay is off for a programmed time interval which is started by S = Seconds Timing Range 1 to 999 Seconds applying input voltage. LED flashes when output relay is off and is on continuously .1 M = 1/10 Minutes Timing Range 0.1 to 99.9 Minutes when the output relay is on. Applying CONTROL input will have no effect on timing M = Minutes Timing Range 1 to 999 Minutes or the state of the relay. .1 H = 1/10 Hours Timing Range 0.1 to 99.9 Hours H = Hours Timing Range 1 to 999 Hours 10 H = 10 Hours Timing Range 10 to 9990 Hours Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1216 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SSF series Programmable Time Delay Relay • 4 user-programmable timing modes • 0.1 sec. to 10 hr. programmable timing range • Parameters set with recessed screwdriver dials • Universal voltage (plug-in relay dependent) • 10A DPDT replaceable output relay minimizes downtime • Front screw terminals • DIN-rail, panel or machine tool track mount File E15631 File LR29186 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Initial Dielectric Strength Modes are user selectable via screwdriver adjustment of recessed 4- Between Coil/Control Switch and Contacts: 1,500VAC for one minute. position selector dial. Modes offered are: On-Delay, Off-Delay, Interval and Latching Interval. Input Data @ 25°C Timing Specifications Voltage: See Ordering Information section for details. Timing Ranges: 0.1 to 3 / 0.33 to 10 / 1 to 30 / 4 to 120 sec.; 0.33 to 10 / Power Requirement: 2W, max. 1 to 30 / 2 to 60 min.; 0.33 to 10 hr. Transient Protection: Non-repetitive transients of the following magni- Timing Range Selection: Screwdriver select via recessed 8-position tudes will not cause spurious operation of affect function and accuracy. selector dial. Operating Voltage <0.1 ms <1 ms Timing Adjustment: Recessed potentiometer adjustment with reference calibrations. 24, 48 VAC/VDC 1,000V 480V Accuracy: Repeat Accuracy: ±1% ±0.01 sec. 120, 240VAC/VDC 3,000V 2500V* Overall Accuracy: ±3% ±0.01 sec. * Min. source impedance of 100 ohm@120/240VAC, 3000V <0.1 , sec. Reset Time: 30 ms. Relay Operate Time: On-Delay and Interval mode: 30 ms. Relay Release Time: Off-Delay, Interval and Latching Interval: 30 ms. (with Environmental Data factory-installed relay). Temperature Range: Storage: -40°C to +85°C. Contact Data @ 25°C Operating: -30°C to +65°C. Arrangements: 2 Form C (DPDT). Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC 345VA. Mechanical Data Expected Mechanical Life: 10 million operations (with factory-installed Mounting/Termination: Panel, DIN-rail, Machine Tool mounting track relay). mounting case with screw terminals. Expected Electrical Life: 500,000 operations, min., at rated resistive Weight: 5.5 oz. (156g) approximately. load( with factory-installed relay). Outline Dimensions Ordering Information 0.188 (5) WIDE SLOT FOR #8 OR M4 MACHINE SCREW 2.19 2.67 (56) SSF R 90 A 1.095 (68) (28) || | | 0.342 (9) Series SSF R = UL Operating Mode 90 Operating Voltage Universal Recognized Multiple modes - (+10%, –15%) Timer Component On-Delay A = 120VAC, 50/60 Hz. 3.125 2 3 4 5 (79) 1 6 Off-Delay B = 240VAC, 50/60 Hz. DIN HOLE Interval E = 24VAC, 50/60 Hz. 3.81 TRACK PATTERN (97) Latching Interval F = 48VAC, 50/60 Hz. MOUNT FOR N = 48VDC SCREW MOUNT O =24VDC 7 8 9 10 P = 125VDC X = No factory- 0.343 (9) installed relay.† 6-32 CAPTIVE 0.322 CLAMP SCREWS (8) † Voltage determined by customer-supplied relay. Only relays that operate on the above-listed voltages should be used. Timer operation using Wiring Diagram (Top View) other relay voltages is not recommended. Authorized distributors are likely to stock the following: SSFR90A SSFR90X Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1217 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SCF series Programmable Time Delay Relay • 4 user-programmable timing modes • 0.1 sec. to 10 hr. programmable timing range • Parameters set with recessed dials • Narrow width saves panel space • 10A DPDT output relay • Socket can be DIN-rail or back panel mounted File E15631(relay) and E140494 (socket) File LR29186 (relay) and LR29513M7 (socket) Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Input Data @ 25°C Timing Modes Modes are user selectable via screwdriver adjustment of recessed 4- Voltage: See Ordering Information section for details. position selector dial. Power Requirement: 2W, max. Modes offered are: On-Delay, Off-Delay, Interval and Latching Interval. Transient Protection: Non-repetitive transients of the following magni- tudes will not cause spurious operation of affect function and accuracy. Timing Specifications Operating Voltage <0.1 ms <1 ms Timing Ranges: 0.1 to 3 / 0.33 to 10 / 1 to 30 / 4 to 120 sec.; 0.33 to 10 / 12VDC 1,000V 240V* 1 to 30 / 2 to 60 min.; 0.33 to 10 hr. 24VAC/VDC 1,000V 240V* Timing Range Selection: Screwdriver select via recessed 8-position 48 VAC/VDC 1,000V 480V* selector dial. Timing Adjustment: External knob potentiometer adjustment with 120 VAC, 125VDC 3,000V 2,500V* reference calibrations. 240VAC/VDC 3,000V 2,500V* Accuracy: Repeat Accuracy: ±1% ±0.01 sec. * Minimum source impedance of 100 ohm. Overall Accuracy: ±3% ±0.01 sec. Reset Time: 30 ms. Environmental Data Relay Operate Time: On-Delay and Interval mode: 55 ms. Temperature Range: Storage: -40°C to +85°C. Relay Release Time: Off-Delay, Interval and Latching Interval: 40 ms. Operating: -30°C to +65°C. Contact Data @ 25°C Mechanical Data Arrangements: 2 Form C (DPDT). Mounting/Termination: 11-pin octal-type plug for use with mating socket. Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC; 345VA. Mount relay in horizontal position (pins horizontal, knob down, LEDs up). Expected Mechanical Life: 10 million operations. Status Indication: Power On LED and Output Contacts LED. Expected Electrical Life: 500,000 operations, min., at rated resistive load. Weight: Relay: 3.5 oz. (156g) approx.; Socket: 1.7 oz. (48.3g) approx. Initial Dielectric Strength Between Terminals and Case: 1,000VAC plus twice the nominal voltage for one minute. Ordering Information Outline Dimensions SCF RX 90 2 A A M3 X 0.5 CAPTIVE .84 | | | | | | CLAMP SCREWS (21) CLEARANCE HOLE FOR | | | Series SCF Operating Mode Output Rating M4 OR #8 MACHINE | | | SCREW Plug-In 90 = Multiple Modes A = 10 Amp 3.29 | | | Programmable On-Delay B = 5 Amp (84) | | | Timer Off-Delay 1.38 1.645 (35) (42) | Interval | | Latching Interval | | | 0.372 (10) .21 | | | 1.42 (5) (36) Mounting Output Operating Voltage 0.71 .109 (3) DIA. (18) ANTI-ROTATION (+10%, –15%) PIN BETWEEN RX = Without Socket 2 = DPDT Relay TERMS 10 & 2 RF = With Socket A = 120VAC, 50/60 Hz. / 125VDC B = 240VAC, 50/60 Hz. § SCF TIMER BCSF11SC SOCKET E = 24VAC, 50/60 Hz. / 24VDC Wiring Diagram (Bottom View) F = 48VAC, 50/60 Hz. / 24VDC Q = 12VDC § Voltage Option B is only available with 5 Amp output option. Authorized distributors are likely to stock the following: None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1218 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CN1 series On Delay, Time Delay Relay For Plug-In or Panel Mounting • 0.1 sec. to 9,990 hr. timing range • Fixed input type (120VAC ± 15%) • 10A output relay with DPDT contacts • 1/16 DIN style enclosure with 8-pin plug-in base • Thumbwheel switches for programming delay time File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Function Initial Dielectric Strength On Delay – Output relay turns on at the end of a programmed time interval Between Output Poles: 1,500V rms, 60 Hz. which is started by applying input voltage. LED flashes when output relay Between Input and Output: 1,500V rms, 60Hz. is off and is on continuously when the output relay is on. Removal of input voltage turns off output relay. Reapplying input voltage resets the unit. INPUT ON Input Data @ 25°C VOLTAGE OFF ➛Voltage: 120VAC ±15%, 60 Hz. N.O. RELAY ON TIME➛ CONTACTS OFF Power Requirement: 3VA @ 120VAC. Transient Protection: 13 Joule MOV. Timing Specifications Input Voltage & Limits Timing Ranges: 0.1 to 99.9 / 1 to 999 sec.; Nominal Minimum Maximum 0.1 to 99.9 / 1 to 999 min.; Voltage Voltage Voltage 0.1 to 99.9 / 1 to 999 / 10 to 9,990 hr. 120VAC 102VAC 138VAC Timing Adjustment: Digital adjustment via thumbwheel switches. Tolerance: ± 0.05% ± 0.04 sec.* Repeatability (Including first cycle of operation.): < ± .05% ± 0.04 sec.* Environmental Data Reset Time (power interruption): 45 ms, typ.; 60 ms, max. Temperature Range: Storage: -40°C to +85°C. * Timing is synchronized with input voltage frequency. Accuracy is dependent on input voltage frequency. Tolerance shows maximum variation from utility companies. Operating: -10°C to +55°C. Humidity: 85% relative humidity, non-condensing. Contact Data @ 25°C Arrangement: 2 Form C (DPDT). Mechanical Data Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; Termination: 8-pin octal style plug. 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. Enclosure: Black plastic 1/16 DIN (48mm x 48mm) case. Expected Mechanical Life: 10 million operations. Sockets: Fits either 27E122 or 27E891 (snap-on) screw terminal sockets. Expected Electrical Life: 100,000 operations, min., at rated load. Weight: 4.3 oz. (122g) approximate. Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Time Delay Relay Accessory Input Voltage Part Number Part Number Name Description 120VAC CN1 SSA-24C667 Mounting Clip Ratchet-fit clip slides onto CN1 from behind to secure CN1 in panel mount applications. Mounting Clip Dimensions Outline Dimensions SSA-24C667 1.88 2.83 Mounting Clip (47.8) (71.9) .32 (8.1) 1.970 2.283 (58.0) (50.0) 1.88 1.76 2.047 (47.8) (44.7) (52.0) 3 1 2 S .591 .64 (15.0) (16.3) Fits 1.77 x 1.77 (45 x 45) panel cutout. 3.15 1.654 (80.0) (42.0) 1.890 (48.0) Wiring Diagram (Bottom View) (pins numbered clockwise from keyway) Time Base .1 S = 1/10 Seconds Timing Range 0.1 to 99.9 Seconds S = Seconds Timing Range 1 to 999 Seconds .1 M = 1/10 Minutes Timing Range 0.1 to 99.9 Minutes M = Minutes Timing Range 1 to 999 Minutes 1 8 .1 H = 1/10 Hours Timing Range 0.1 to 99.9 Hours H = Hours Timing Range 1 to 999 Hours INPUT 10 H = 10 Hours Timing Range 10 to 9990 Hours Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1219 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CG series CMOS IC Time Delay Relay • Repeatability to .05% • Choice of timing modes – Delay on operate – Delay on release – Interval on • Knob adjustable • 10A output relay with DPDT contacts • Various models time from 0.5 sec. to 100 min. File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Contact Data @ 25°C Arrangements: 2 Form C (DPDT). Delay on operate – Delay period begins when input voltage is applied. At Material: Silver-cadmium oxide alloy. the end of the delay period, the relay will operate and will not release until Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; input voltage is removed. Reset occurs when input voltage is reapplied. 1/3 HP @ 120VAC. Expected Mechanical Life: 10 million operations. INPUT ON Expected Electrical Life: 100,000 operations, min., at rated load. VOLTAGE OFF ➛N.O. RELAY ON TIME➛ CONTACTS OFF Initial Dielectric Strength Between Open Contacts: 500V rms, 60 Hz. Delay on release – Input voltage must be applied continuously to operate Between All Other Conductors: 500V rms, 60 Hz. the internal relay. When the control switch is closed, the relay energizes. When the control switch is opened, timing begins. When timing is complete, the relay will de-energize. Time may be reset to zero during timing by closing the control switch. CONTROL ON SWITCH OFF Input Data @ 25°C ➛N.O. RELAY ON Voltage: 120VAC and 24VDC. TIME➛ CONTACTS OFF Power Requirement: AC Types: Typically less than 3 VA. DC Types: Typically less than 3 W. Transient Protection: Yes. Reverse Voltage Protection: Yes. Interval on – The relay energizes and timing begins when input voltage is Input Voltages & Limits @25°C applied. At the end of the time delay period the relay will de-energize. Voltage Nominal Minimum Maximum Reset is accomplished by removing, then reapplying, the input voltage. Type Voltage Voltage Voltage AC 120 105 130 DC 24 20 32 INPUT ON VOLTAGE OFF Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. ➛N.O. RELAY ON TIME➛ CONTACTS OFF Environmental Data Temperature Range: Storage: -40°C to +85°C. Timing Specifications Operating: -10°C to +55°C. Timing Ranges: From 0.5 to 5.0 sec. through 10 to 100 min. Timing Adjustment: Knob adjustable. Tolerance (for AC units add ±1/2 cycle 60 Hz.): Knob Adj. Types:–0, +10% of max. specified at high end of timing range; Mechanical Data +0, –10% of min. specified at low end. Termination: 8- or 11-pin octal style plug. Delta Time (for AC units add ±1 cycle 60 Hz.): ±2%, typ.; ±5%, max. Repeatability (including first cycle of operation): Enclosure: Yellow plastic case. Knob adjustable types have dial scale for reference only. AC: ±0.1%, typ.; ±0.5%, max.; but not less than ±16 ms. DC: ±0.05% typ.; ±0.1% max.; but not less than ±3 ms. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) screw terminal sockets. 11-pin types fit either 27E123 or Release Time: 30 ms, typ.; 45 ms, max. Recycle Time: AC: 40 ms, typ.; 60 ms, max. 27E892 (snap-on) screw terminal sockets. Weight: 8 oz. (227g) approximately. DC: 30 ms, typ.; 45 ms, max. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1220 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Delay on Operate Models Delay on Release Models Voltage Time Adjustment Wiring Dia. Part Number Voltage Time Adjustment Wiring Dia. Part Number 0.5 to 5 Min. CGB-38-70005M 120VAC 1 to 10 Min. Knob 2 CGB-38-78010M 120VAC 1 to 10 Min. Knob 1 CGB-38-70010M 5 to 50 Min. CGB-38-78050M 5 to 50 Min. CGB-38-70050M 10 to 100 Min. CGB-38-70100M Interval on Models 24VDC 5 to 50 Min. Knob 1 CGD-38-30050M Voltage Time Adjustment Wiring Dia. Part Number 120VAC 0.5 to 5 Sec. Knob 1 CGB-38-79005S 1 to 10 Min. CGB-38-79010M 24VDC 1 to 10 Min. Knob 1 CGD-38-39010M Outline Dimensions ➛ 2.406 MAX. (61.1) ➛ ➛➛➛2.937 MAX. .56 1.781 MAX. .60 ➛➛➛(45.2) (74.6) (14.2) (15.2) Wiring Diagrams – Bottom Views (pins numbered clockwise from keyway) ➛➛➛➛ ➛➛➛➛ EXT. CONT. _ _ + + INPUT INPUT SW* (DC POLARITY INDICATED) (DC POLARITY INDICATED) Fig.2 Fig.1 11 Pin 8 Pin * If control switch is closed when power is applied, relay will immediately energize. A 50 millisecond minimum switch closure is required. IMPORTANT: a dry circuit switch is recommemded. A “dry circuit” switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. ** Note: input polarity for DC operation. For most reliable operation on AC, connect high side to “+” and low side to “–”. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1221 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CD series CMOS IC Time Delay Relay • 1% Repeatability • Operates from -40°C to +55°C • Delay on operate or delay on release timing modes • Fixed, knob or resistor adjustable types – Calibrated dial on knob adjustable types • 10A output relay with SPDT or DPDT contacts • Various models time from 0.1 to 180 sec. File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Initial Dielectric Strength Timing Modes Between Open Contacts: 500V rms, 60 Hz. Delay on operate – Delay period begins when input voltage is applied. At Between All Other Conductors: 500V rms, 60 Hz. the end of the delay period, the relay will operate and will not release until input voltage is removed. Reset occurs when input voltage is reapplied. INPUT ON VOLTAGE OFF ➛ N.O. RELAY ON TIME➛ CONTACTS OFF Input Data @ 25°C Voltage: 24 & 120VAC and 12 through 110VDC. Delay on release – Input voltage must be applied continuously to operate Power Requirement: AC Types: Typically less than 3 VA. the internal relay. When control Input is applied, the relay energizes. DC Types: Typically less than 3 W. When control input is removed, timing begins. When timing is complete, Transient Protection: Yes. the relay will de-energize. Time may be reset to zero during timing by Reverse Voltage Protection: Yes. reapplying control input. Input Voltages & Limits @ 25°C Voltage Nominal Minimum Maximum CONTROL ON Type Voltage Voltage Voltage INPUT OFF N.O. RELAY ON➛ AC 24 20 28 TIME➛CONTACTS OFF 120 105 130 12 11 13 DC 24 20 32 48 41 55 110 95 125 Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). AC models will operate on 50 or 60 Hz. Timing Specifications Timing Ranges: From 0.1 to 180 sec. Timing Adjustment: Fixed, external resistor and knob adjustable. Tolerance (for AC units add ±1/2 cycle 60 Hz.): Knob Adj. Types: ±5% of max. specified at high end of timing range; min. specified, or less, at low end; ±10% full scale. Fixed Types: ±5%. Res. Adj. Types: ±5% at high end of timing range; min. specified, or less, Environmental Data at low end. Temperature Range: Storage: -55°C to +85°C. Delta Time (for AC units add ±1 cycle 60 Hz.): ±5%. Operating: -40°C to +55°C. Repeatability (for AC units add ±1 cycle 60 Hz.): ±1%. Release Time: 45 ms, typ.; 60 ms, max. Recycle Time: 45 ms, typ.; 60 ms, max. Mechanical Data Contact Data @ 25°C Termination: 8- or 11-pin octal style plug. Arrangements: 2 Form C (DPDT). Enclosure: Yellow plastic case. Knob adjustable types have dial scale Material: Silver-cadmium oxide alloy. calibrated in seconds ±5%. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) 120VAC. screw terminal sockets. 11-pin types fit either 27E123 or Expected Mechanical Life: 10 million operations. 27E892 (snap-on) screw terminal sockets. Expected Electrical Life: 100,000 operations, min., at rated load. Weight: 8 oz. (227g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1222 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Delay on Operate Models Delay on Release Models Voltage Time Adjustment Wiring Dia. Part Number Voltage Time Adjustment Wiring Dia. Part Number 0.1 to 1 Sec. CDB-38-70001 0.1 to 1 Sec. CDB-38-70016 0.1 to 5 Sec. CDB-38-70002 0.1 to 5 Sec. CDB-38-70091 120VAC 0.1 to 10 Sec. Knob 1 CDB-38-70003 120VAC 0.1 to 10 Sec. Knob 3 CDB-38-70014 0.3 to 30 Sec. CDB-38-70006 0.3 to 30 Sec. CDB-38-70092 0.6 to 60 Sec. CDB-38-70004 0.6 to 60 Sec. CDB-38-70012 1.8 to 180 Sec. CDB-38-70005 1.8 to 180 Sec. CDB-38-70015 120VAC 1 Sec. Fixed CDA-38-70012 120VAC 1 Sec. Fixed 3 CDA-38-70025 0.1 to 1 Sec. CDF-38-70001 12VDC 180 Sec. Fixed 3 CDC-38-20026 120VAC 0.1 to 5 Sec. Resistor 2 CDF-38-70002 0.1 to 10 Sec. CDD-38-30014 0.1 to 10 Sec. CDF-38-70003 24VDC 0.6 to 60 Sec. Knob 3 CDD-38-30012 0.1 to 10 Sec. CDD-38-30003 1.8 to 180 Sec. CDD-38-30008 24VDC 0.6 to 60 Sec. Knob 1 CDD-38-30004 1.8 to 180 Sec. CDD-38-30005 48VDC 0.6 to 60 Sec. Knob 1 CDD-38-40002 0.1 to 1 Sec. CDD-38-60004 110VDC 0.1 to 10 Sec. Knob 1 CDD-38-60001 0.6 to 60 Sec. CDD-38-60002 1.8 to 180 Sec. CDD-38-60003 Outline Dimensions ➛ 2.406 MAX. (61.1) ➛ ➛➛.56➛2.937 MAX. 1.781 MAX. .60 ➛➛➛(14.2) (74.6) (45.2) (15.2) Wiring Diagrams – Bottom Views (pins numbered clockwise from keyway) CONTROL INPUT* _ EXTERNAL RESISTOR + ➛➛ ➛➛ ➛➛➛➛ ➛➛ _➛➛+ _ SUPPLY + _ + INPUT INPUT INPUT (DC POLARITY INDICATED)** (DC POLARITY INDICATED)** (DC POLARITY INDICATED)** Fig. 1 Fig. 2 Fig. 3 8 Pin 11 Pin 11 Pin * If control input is applied when supply input is applied, relay will immediately energize. A 50 millisecond minimum control pulse is required. ** Note Input polarity for DC operation. For most reliable operation on AC, connect high side to “+” and low side to “–”. External Resistor Selection Chart See External Resistor Selection Charts at beginning of Time Delay Relay section of this Databook. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1223 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CK series Mid-Priced CMOS IC Time Delay Relay • Choice of timing modes – Delay on operate – Delay on release – Delay on dropout (no input required during timing) – Interval on • Knob or resistor adjustable types • 10A output relay with DPDT contacts • Various models time from 0.1 to 180 sec. File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Contact Data @ 25°C Arrangements: 2 Form C (DPDT). Delay on operate – Delay period begins when input voltage is applied. At the end of the delay period, the relay will operate and will not release until Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ input voltage is removed. Reset occurs when input voltage is reapplied. 120VAC. INPUT Expected Mechanical Life: 10 million operations. ON VOLTAGE OFF Expected Electrical Life: 100,000 operations, min., at rated load. ➛ N.O. RELAY ON TIME➛ CONTACTS OFF Delay on release – Input voltage must be applied continuously to operate Initial Dielectric Strength the internal relay. When the control switch is closed, the relay energizes. Between Open Contacts: 500V rms, 60 Hz. When the control switch is opened, timing begins. When timing is Between All Other Conductors: 500V rms, 60 Hz. complete, the relay will de-energize. Time may be reset to zero during timing by closing the control switch. CONTROL ON SWITCH OFF ➛N.O. RELAY ON Input Data @ 25°C TIME➛CONTACTS OFF Voltage: 24 & 120VAC and 12 & 24VDC. Power Requirement: AC Types: Typically less than 3 VA. DC Types: Typically less than 3 W. Delay on dropout – The relay operates immediately upon application of Initiate Time: Delay on dropout timers must have input voltage applied for input voltage. Timing begins when input voltage is removed. When timing a minimum of three seconds for dropout function to be is complete, the relay will de-energize. Reset occurs when input voltage is guaranteed. reapplied. Transient Protection: Yes. INPUT Reverse Voltage Protection: Yes. ON VOLTAGE OFF Input Voltages & Limits @ 25°C N.O. RELAY➛ON TIME➛CONTACTS OFF Voltage Nominal Minimum Maximum Type Voltage Voltage Voltage Interval on (with control switch) – Input voltage must be applied AC 24 20 28 continuously to operate the internal relay. The relay energizes and timing 120 105 130 begins when the external switch is closed. At the end of the time delay DC 12 11 13 period the relay will de-energize. Reset is accomplished by opening and 24 20 32 reclosing the control switch. Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). CONTROL ON AC models will operate on 50 or 60 Hz. SWITCH OFF ➛ N.O. RELAY ON TIME➛ CONTACTS OFF Environmental Data Timing Specifications Temperature Range: Storage: -55°C to +85°C. Timing Ranges: From 0.1 to 180 sec. Operating: -10°C to +55°C. Timing Adjustment: External resistor and knob adjustable. Tolerance (for AC units add ±1/2 cycle 60 Hz.): Knob Adj. Types:–0, +20% of max. specified at high end of timing range; Mechanical Data min. specified, or less, at low end. Fixed Types: ±5%. Termination: 8- or 11-pin octal style plug. Res. Adj. Types: ±5% at high end of timing range; min. specified, or less, Enclosure: White plastic case. Knob adjustable types have dial scale for at low end. reference only. Delta Time (for AC units add ±1 cycle 60 Hz.): ±10%. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) Repeatability (for AC units add ±1 cycle 60 Hz.): ±2%. screw terminal sockets. 11-pin types fit either 27E123 or Release Time: 60 ms, typ.; 100 ms, max. 27E892 (snap-on) screw terminal sockets. Recycle Time: 60 ms, typ.; 100 ms, max. Weight: 6 oz. (170g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1224 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Delay On Release Models Delay On Operate Models Voltage Time Adjustment Wiring Dia. Part Number Voltage Time Adjustment Wiring Dia. Part Number 0.1 to 10 Sec. CKB-38-78010 24VAC 0.1 to 10 Sec. Knob 1 CKB-38-30010 120VAC 0.6 to 60 Sec. Knob 3 CKB-38-78060 0.1 to 10 Sec. CKB-38-70010 1.8 to 180 Sec. CKB-38-78180 120VAC 0.6 to 60 Sec. Knob 1 CKB-38-70060 120VAC 0.1 to 10 Sec. Resistor 4 CKF-38-78010 1.2 to 120 Sec. CKB-38-70120 1.8 to 180 Sec. CKB-38-70180 24VDC 0.1 to 10 Sec. Resistor 4 CKH-38-38010 120VAC 0.1 to 10 Sec. Resistor 2 CKF-38-70010 12VDC 0.1 to 10 Sec. Knob 1 CKD-38-20010 Delay On Dropout Models Voltage Time Adjustment Wiring Dia. Part Number 24VAC 0.1 to 10 Sec. Knob 1 CKB-38-37010 0.6 to 60 Sec. CKB-38-37060 0.1 to 10 Sec. CKB-38-77010 120VAC 0.6 to 60 Sec. Knob 1 CKB-38-77060 1.2 to 120 Sec. CKB-38-77120 Interval On Models Voltage Time Adjustment Wiring Dia. Part Number 120VAC 0.1 to 10 Sec. Knob 3 CKB-38-79010 Outline Dimensions ➛ 2.406 MAX. (61.1) ➛ ➛➛➛2.937 MAX. .56 1.781 MAX. .60➛➛➛(74.6) (45.2) (14.2) (15.2) Wiring Diagrams – Bottom Views (pins numbered clockwise from keyway) EXTERNAL RESISTOR EXTERNAL RESISTOR ➛➛ EXTERNAL➛➛ EXTERNAL➛➛CONTROL ➛➛CONTROL➛➛SWITCH* ➛➛_ SWITCH* _ + +➛➛ ➛➛CONTINUOUS CONTINUOUS _ _ + + SUPPLY SUPPLY INPUT INPUT INPUT INPUT (DC POLARITY INDICATED)** (DC POLARITY INDICATED)** (DC POLARITY INDICATED)** (DC POLARITY INDICATED)** Fig.1 Fig. 2 Fig. 3 Fig. 4 8 Pin 11 Pin 11 Pin 11 Pin * If control switch is closed when power is applied, relay will immediately energize. A 50 millisecond minimum switch closure is required. IMPORTANT: A dry circuit switch is recommended. A “dry circuit” switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. ** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to “+” and low side to “–”. External Resistor Chart See External Resistor Selection Charts at beginning of Time Delay Relay section of this Databook. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1225 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CH series Mid- To Low-Priced CMOS IC Time Delay Relay • Choice of timing modes – Delay on operate – Delay on release – Interval on • Fixed or knob adjustable types • 10A output relay with DPDT contacts • Various models time from 1 to 180 sec. File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Contact Data @ 25°C Timing Modes Arrangements: 2 Form C (DPDT). Delay on operate – Delay period begins when input voltage is applied. At Material: Silver-cadmium oxide alloy. the end of the delay period, the relay will operate and will not release until Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ input voltage is removed. Reset occurs when input voltage is reapplied. 120VAC. INPUT ON Expected Mechanical Life: 10 million operations. VOLTAGE OFF Expected Electrical Life: 100,000 operations, min., at rated load. N.O. RELAY ON TIME CONTACTS OFF Initial Dielectric Strength Between Open Contacts: 500V rms, 60 Hz. Between All Other Conductors: 500V rms, 60 Hz. Delay on release – Input voltage must be applied continuously to operate the internal relay. When the control switch is closed, the relay energizes. When the control switch is opened, timing begins. When timing is complete, the relay will de-energize. Time may be reset to zero during timing by closing the control switch. Input Data @ 25°C CONTROL ON Voltage: 24 through 240VAC and 24VDC. SWITCH OFF Power Requirement: AC Types: Typically less than 3 VA. N.O. RELAY ON TIME DC Types: Typically less than 3 W. CONTACTS OFF Transient Protection: Yes. Reverse Voltage Protection: Yes. Input Voltages & Limits @ 25°C Voltage Nominal Minimum Maximum Type Voltage Voltage Voltage Interval on – The relay energizes and timing begins when input voltage is applied. At the end of the time delay period the relay will de-energize. Reset is accomplished by removing, then reapplying, the input voltage. AC 24 20 28 120 105 130 INPUT ON 240 210 260 VOLTAGE OFF DC 24 20 32 Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). N.O. RELAY ON AC models will operate on 50 or 60 Hz. TIME CONTACTS OFF Environmental Data Timing Specifications Temperature Range: Storage: -55°C to +85°C. Operating: -10°C to +55°C. Timing Ranges: From 1 to 180 sec. Timing Adjustment: Fixed and knob adjustable. Tolerance (for AC units add ±1/2 cycle 60 Hz.): Knob Adj. Types:–0, +20% of max. specified at high end of timing range; Mechanical Data min. specified, or less, at low end. Fixed Types: ±5%. Termination: 8- or 11-pin octal style plug. Res. Adj. Types: ±5% at high end of timing range; min. specified, or less, Enclosure: White plastic case. Knob adjustable types have dial scale for at low end. reference only. Delta Time (for AC units add ±1 cycle 60 Hz.): ±10%. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) Repeatability (for AC units add ±1 cycle 60 Hz.): ±2%. screw terminal sockets. 11-pin types fit either 27E123 or Release Time: 125 ms, typ.; 200 ms, max. 27E892 (snap-on) screw terminal sockets. Recycle Time: 125 ms, typ.; 200 ms, max. Weight: 6 oz. (170g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1226 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Delay on Operate Models Delay on Release Models Voltage Time Adjustment Wiring Dia. Part Number Voltage Time Adjustment Wiring Dia. Part Number 24VAC 1 to 10 Sec. Knob 1 CHB-38-30001 24VAC 1 to 10 Sec. Knob 3 CHB-38-30011 1 to 180 Sec. CHB-38-30003 1 to 10 Sec. CHB-38-70011 1 to 10 Sec. CHB-38-70001 120VAC 1 to 60 Sec. Knob 3 CHB-38-70012 120VAC 1 to 60 Sec. Knob 1 CHB-38-70002 1 to 180 Sec. CHB-38-70013 1 to 180 Sec. CHB-38-70003 24VDC 1 to 10 Sec. Knob 3 CHD-38-30011 120VAC 10 Sec. Fixed 1 CHA-38-70001 1 to 180 Sec. CHD-38-30013 240VAC 1 to 10 Sec. Knob 1 CHB-38-80001 Interval on Models 1 to 10 Sec. CHD-38-30001 24VDC 1 to 60 Sec. Knob 1 CHD-38-30002 Voltage Time Adjustment Wiring Dia. Part Number 1 to 180 Sec. CHD-38-30003 1 to 10 Sec. CHB-38-70021 120VAC 1 to 60 Sec. Knob 1 CHB-38-70022 1 to 180 Sec. CHB-38-70023 24VDC 1 to 10 Sec. Knob 1 CHD-38-30021 Outline Dimensions ➛ 2.406 MAX. (61.1) ➛ ➛➛➛2.937 MAX. .56 1.781 MAX. .60 ➛➛➛(14.2) (74.6) (45.2) (15.2) Wiring Diagrams – Bottom Views (pins numbered clockwise from keyway) EXTERNAL RESISTOR EXT SWITCH* ➛➛ ➛➛➛➛ ➛➛ ➛➛➛➛ _ _ + + + INPUT - INPUT (DC POLARITY INDICATED) (DC POLARITY INDICATED) AC INPUT Fig. 1 Fig. 3 Fig. 2 8 Pin 11 Pin 11 Pin * If control switch is closed when power is applied, relay will immediately energize. A 50 millisecond minimum switch closure is required. IMPORTANT: A dry circuit switch is recommended. A “dry circuit” switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. ** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to “+” and low side to “–”. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1227 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CB series CMOS IC Time Delay Relay • Choice of timing modes – Delay on operate – Delay on release – Interval on with or without control switch • Knob adjustable • 10A output relay with SPDT or DPDT contacts • Various models time from 0.1 sec. to 100 min. File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Contact Data @ 25°C Delay on operate – Delay period begins when input voltage is applied. At Arrangements: 2 Form C (DPDT), except 8-pin delay on release model the end of the delay period, the relay will operate and will not release until has 1 Form C (SPDT). input voltage is removed. Reset occurs when input voltage is reapplied. Material: Silver-cadmium oxide alloy. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; INPUT ON 1/3 HP @ 120VAC. VOLTAGE OFF Expected Mechanical Life: 10 million operations. Expected Electrical Life: 100,000 operations, min., at rated load. N.O. RELAY ON TIME CONTACTS OFF Delay on release – Input voltage must be applied continuously to operate the internal relay. When the control switch is closed, the relay energizes. Initial Dielectric Strength When the control switch is opened, timing begins. When timing is complete, the relay will de-energize. Time may be reset to zero during Between Open Contacts: 500V rms, 60 Hz. timing by closing the control switch. Between All Other Conductors: 500V rms, 60 Hz. CONTROL ON SWITCH OFF N.O. RELAY ON TIME CONTACTS OFF Input Data @ 25°C Interval on (without control switch) – The relay energizes and timing begins when input voltage is applied. At the end of the time delay period Voltage: 24 and 120VAC, and 12 and 24VDC. the relay will de-energize. Reset is accomplished by removing, then Power Requirement: AC Types: Typically less than 3 VA. reapplying, the input voltage. DC Types: Typically less than 3 W. Transient Protection: Yes. INPUT ON Reverse Voltage Protection: Yes. VOLTAGE OFF Input Voltages & Limits @ 25°C Voltage Nominal Minimum Maximum N.O. RELAY ON TIME CONTACTS OFF Type Voltage Voltage Voltage Interval on (with control switch) – Input voltage must be applied AC 24 20 28 continuously to operate the internal relay. The relay energizes and timing 120 105 130 begins when the external switch is closed. At the end of the time delay DC 12 11 13 period the relay will de-energize. Reset is accomplished by opening and 24 20 32 reclosing the control switch. Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). CONTROL ON AC models will operate on 50 or 60 Hz. SWITCH OFF N.O. RELAY ON TIME CONTACTS OFF Environmental Data Temperature Range: Storage: -55°C to +85°C. Timing Specifications Operating: -10°C to +55°C. Timing Ranges: From 0.1 to 1.0 sec. through 10 to 100 min. Timing Adjustment: Knob adjustable. Tolerance (for AC units add ±1/2 cycle 60 Hz.): Knob Adj. Types: –0, +30% of max. specified at high end of timing range; Mechanical Data min. specified, or less, at low end. Fixed Types: ±10%. Termination: 8- or 11-pin octal style plug. Res. Adj. Types: ±10% at high end of timing range; min. specified, or less, Enclosure: White plastic case. Knob adjustable types have dial scale for at low end. reference only. Delta Time (for AC units add ±1 cycle 60 Hz.): ±10%. Sockets: Models with 8-pin base fit either 27E122 or 27E891 (snap-on) Repeatability (for AC units add ±1 cycle 60 Hz.): ±2%. screw terminal sockets. 11-pin types fit either 27E123 or Release Time: 60 ms, typ.; 100 ms, max. 27E892 (snap-on) screw terminal sockets. Recycle Time: 60 ms, typ.; 100 ms, max. Weight: 6 oz. (170g) approximately. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1228 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Delay on Operate Models Delay on Release Models Voltage Time Adjustment Wiring Dia. Part Number Voltage Time Adjustment Wiring Dia. Part Number 24VAC 0.1 to 10 Sec. Knob 1 CB-1041B-30 24VAC 0.1 to 10 Sec. Knob 3 CB-1045B-38 1.8 to 180 Sec CB-1042B-30 1.8 to 180 Sec CB-1046B-38 0.1 to 1 Sec. CB-1001B-70 0.1 to 10 Sec. 3 CB-1021B-78 0.1 to 5 Sec. CB-1002B-70 120VAC 0.1 to 10 Sec. Knob 5 CB-1022B-78 0.1 to 10 Sec. CB-1003B-70 0.6 to 60 Sec. 3 CB-1023B-78 120VAC 0.6 to 60 Sec. Knob 1 CB-1004B-70 1.8 to 180 Sec. 3 CB-1024B-78 1.8 to 180 Sec. CB-1005B-70 24VDC 0.1 to 10 Sec. Knob 3 CB-1038D-38 1 to 10 Min. CB-1006B-70 1.8 to 180 Sec. CB-1039D-38 10 to 100 Min. CB-1007B-70 Interval on Models 12VDC 0.1 to 10 Sec. Knob 1 CB-1047D-20 Voltage Time Adjustment Wiring Dia. Part Number 0.1 to 1 Sec. CB-1026D-30 24VDC 0.1 to 10 Sec. Knob 1 CB-1028D-30 24VAC 0.1 to 10 Sec. Knob 1 CB-1043B-39 0.6 to 60 Sec. CB-1029D-30 0.1 to 5 Sec. 1 CB-1011B-79 1.8 to 180 Sec. CB-1030D-30 120VAC 0.1 to 10 Sec. Knob 1 CB-1014B-79 1 to 10 Min. 1 CB-1018B-79 24VDC 0.1 to 5 Sec. Knob 1 CB-1034D-39 1.8 to 180 Sec. CB-1036D-39 Outline Dimensions ➛ 2.406 MAX. (61.1) ➛ ➛➛➛.60 2.937 MAX. 1.781 MAX. .56 ➛➛➛ (15.2) (74.6) (45.2) (14.2) Wiring Diagrams - Bottom Views (pins numbered clockwise from keyway) EXTERNAL EXTERNAL CONTROL CONTROL SWITCH* SWITCH* ➛ ➛➛ ➛➛ ➛ ➛ ➛➛_ _ + + _ CONTINUOUS CONTINUOUS + SUPPLY SUPPLY INPUT (DC POLARITY INPUT INPUT INDICATED)** (DC POLARITY INDICATED)** (DC POLARITY INDICATED)** Fig. 3 Fig. 5 Fig. 1 11 Pin 8 Pin 8 Pin * If control switch is closed when power is applied, relay will immediately energize. A 50 millisecond minimum switch closure is required. IMPORTANT: A dry circuit switch is recommended. A “dry circuit” switch is one rated to reliably switch currents of less than 50mA. Use of a switch rated for other than dry circuit may result in failure of the time delay relay to function properly. ** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to “+” and low side to “–”. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1229 specified. Refer to inside back cover. ➛ Catalog 1308242 Issued 3-03 P&B CR series Recycle Time Delay Relay • Individual ON and OFF time adjustment knobs • 10A output relay with DPDT contacts • Various models time from 0.1 to 180 sec. File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Initial Dielectric Strength Recycle timing – First delay period begins when input voltage is applied. Between Open Contacts: 500V rms, 60 Hz. At the end of the first delay, or “off” period, the relay will operate and the Between All Other Conductors: 500V rms, 60 Hz. second delay, or “on” period, begins. When the second delay period ends, the relay de-energizes. This recycling sequence will continue until in- put voltage is removed. When input voltage is removed, the relay will de- Input Data @ 25°C energize. Voltage: 120VAC and 24VDC. INPUT ON Power Requirement: AC Types: Typically less than 3 VA. VOLTAGE OFF DC Types: Typically less than 3 W. 1 1 Transient Protection: Yes. N.O. RELAY ON TIME TIME TIME➛➛➛➛➛➛ 2 Reverse Voltage Protection: Yes. CONTACTS OFF Input Voltages & Limits @ 25°C Voltage Nominal Minimum Maximum Type Voltage Voltage Voltage Timing Specifications AC 120 105 130 Timing Ranges: From 0.1 to 180 sec. DC 24 20 32 Timing Adjustment: Knob adjustable. Tolerance (for AC units add ±1/2 cycle 60 Hz.): -0%, +20% of max. Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). specified at high end of AC models will operate on 50 or 60 Hz. timing range; min. speci- fied, or less, at low end. Delta Time (for AC units add ±1 cycle 60 Hz.): ±10%. Environmental Data Repeatability (for AC units add ±1 cycle 60 Hz.): ±2%. Release Time: 60ms, typ.; 100 ms, max. Temperature Range: Storage: -55°C to +85°C. Operating: -10°C to +55°C. Contact Data @ 25°C Mechanical Data Arrangements: 2 Form C (DPDT). Material: Silver-cadmium oxide alloy. Termination: Octal plug. Rating: 10 A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; Enclosure: White plastic case with dial scales for reference only. 1/3 HP @ 120VAC. Sockets: Fits either 27E122 or 27E891 (snap-on) 8-pin screw terminal Expected Mechanical Life: 10 million operations. sockets. Expected Electrical Life: 100,000 operations, min., at rated load. Weight: 6 oz. (170g) approximately. Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Voltage Time Part Number Voltage Time Part Number DC Type 0.1 to 10 Sec. CRB-48-70010 24VDC 1.8 to 180 Sec. CRD-48-30180 AC 120VAC 0.3 to 30 Sec. CRB-48-70030 Types 0.6 to 60 Sec. CRB-48-70060 1.8 to 180 Sec. CRB-48-70180 Outline Dimensions Wiring Diagram – Bottom View ➛➛(pins numbered clockwise form keyway)➛3.56 MAX. 1.781 MAX. .60 .56 ➛➛➛(90.42) (45.2) (15.2) (14.22)➛➛ ➛.875➛➛ ➛(22.23)➛➛ 18 1.25 _ + INPUT (31.75) (DC POLARITY INDICATED) Fig.1 ➛ 8 Pin ** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to “+” and low side to “–”. ➛ 2.406 MAX. (61.1) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1230 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CL -CU series Compact Time Delay Relay • Delay on operate timing mode • Fixed, knob or resistor adjustable types • 10A output relay with DPDT contacts • Variety of mounting options • Various models time from 0.1 to 120 sec. • No timing cycle interrupt transfer (CL only) File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Contact Data @ 25°C Delay on operate – Delay period begins when input voltage is applied. At Arrangements: 2 Form C (DPDT). the end of the delay period, the relay will operate and will not release until Material: Silver-cadmium oxide alloy. input voltage is removed. Reset occurs when input voltage is reapplied. Rating: 10A @ 30VDC or 277VAC, resistive; 1/2 HP @ 250VAC; 1/3 HP @ 120VAC. INPUT ON Expected Mechanical Life: 10 million operations. VOLTAGE OFF Expected Electrical Life: 100,000 operations, min., at rated load. N.O. RELAY ON TIME Initial Dielectric Strength➛➛CONTACTS OFF Between Open Contacts: 500V rms, 60 Hz. Between All Other Conductors: 500V rms, 60 Hz. CL Timing Specifications Input Data @ 25°C Timing Ranges: From 0.1 to 1.0 sec. through 1.2 to 120 sec. Voltage: 24 & 120VAC and 12 & 24VDC. Timing Adjustment: Fixed, external resistor and knob adjustable. Power Requirement: AC Types: Typically less than 3 VA. Tolerance (for AC units add ±1/2 cycle 60 Hz.): DC Types: Typically less than 3 W. Knob Adj. Types:–0, +20% of max. specified at high end of timing Transient Protection: Yes. range; min. specified, or less, at low end. Reverse Voltage Protection: Yes. Fixed Types: ±5%. Res. Adj. Types: ±10% at high end of timing range; min. specified, or Input Voltages & Limits @ 25°C less, at low end. Voltage Nominal Minimum Maximum Repeatability (for AC units add ±1 cycle 60 Hz.): ±3%. Type Voltage Voltage Voltage Release Time: 100 ms, typ.; 150 ms, max. Recycle Time: 100 ms, typ.; 150 ms, max. AC 24 20 28 120 105 130 DC 12 11 13 CU Timing Specifications 24 20 32 Timing Ranges: From 1.0 to 10 sec. through 1.0 to 120 sec. Note: DC voltage must be filtered (5% p-p ripple max. at nom. voltage). Timing Adjustment: Fixed, external resistor and knob adjustable. AC models will operate on 50 or 60 Hz. Tolerance (for AC units add ±1/2 cycle 60 Hz.): Knob Adj. Types:–0, +20% of max. specified at high end of timing Environmental Data range; min. specified, or less, at low end. Temperature Range: Storage: -55°C to +85°C. Fixed Types: ±5%. Operating: -10°C to +55°C. Res. Adj. Types: ±10% at high end of timing range; min. specified, or less, at low end. Mechanical Data Repeatability (for AC units add ±1 cycle 60 Hz.): ±3%. Release Time: 150 ms, typ.; 225 ms, max. Termination: 0.187 in. (4.75mm) quick-connect. Recycle Time: 150 ms, typ.; 225 ms, max. Enclosure: Yellow plastic case (see outline drawings for various options). Knob adjustable types have dial scale for reference only. Sockets: Solder, printed circuit and screw terminal sockets available. Note: On CU types the switching contact may momentarily transfer if the timing interval is interrupted. CL types have no timing cycle interrupt transfer. Weight: 3.5 oz. (99g) approximately. CL Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Voltage Time Adjustment Wiring Dia. Part Number Voltage Time Adjustment Wiring Dia. Part Number 24VAC 0.1 to 10 Sec. Knob 1 CLB-51-30010 12VDC 0.1 to 10 Sec. Knob 1 CLD-51-20010 24VAC 0.1 to 10 Sec. Resistor 2 CLF-42-30010 12VDC 10 Sec. Fixed 1 CLC-41-20010 0.1 to 10 Sec. CLB-51-70010 12VDC 1.2 to 120 Sec. Resistor 2 CLH-41-20120 120VAC 0.3 to 30 Sec. Knob 1 CLB-51-70030 24VDC 5 Sec. Fixed 1 CLC-41-30005 1.2 to 120 Sec. CLB-51-70120 0.1 to 10 Sec. CLH-41-30010 120VAC 3 Sec. Fixed 1 CLA-41-70003 24VDC 0.3 to 30 Sec. Resistor 2 CLH-41-30030 30 Sec. CLA-41-70030 0.1 to 10 Sec. CLH-45-30010 0.1 to 10 Sec. CLF-41-70010 41 style models (e.g. CLA-41-70010) have plain case. 120VAC 0.1 to 10 Sec. Resistor 2 CLF-42-70010 42 style models (e.g. CLF-42-70010) have bracket mount case. 1.2 to 120 Sec. CLF-41-70120 45 style models (e.g. CLH-45-30010) have bracket mount case with test button. 51 style models (e.g. CLB-51-30010) have plain case with knob. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1231 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CU Ordering Information – Authorized distributors are more likely to stock boldface items listed below. Voltage Time Adjustment Wiring Dia. Part Number Voltage Time Adjustment Wiring Dia. Part Number 24VAC 10 Sec. Fixed 1 CUA-41-30010 1 to 10 Sec. CUF-41-70010 1 to 10 Sec. CUF-42-70010 1 to 10 Sec. CUF-41-30010 120VAC 1 to 30 Sec. Resistor 2 CUF-41-70030 24VAC 1 to 10 Sec. Resistor 2 CUF-42-30010 1 to 120 Sec. CUF-41-70120 1 to 10 Sec. CUB-51-70010 1 to 120 Sec. CUF-42-70120 120VAC 1 to 30 Sec. Knob 1 CUB-51-70030 1 to 10 Sec. CUH-41-30010 1 to 60 Sec. CUB-51-70060 1 to 10 Sec. CUH-42-30010 1 to 120 Sec. CUB-51-70120 24VDC 1 to 120 Sec. Resistor 2 CUH-41-30120 1 Sec. CUA-41-70001 1 to 120 Sec. CUH-42-30120 3 Sec. CUA-41-70003 41 style models (e.g. CUA-41-70010) have plain case. 3 Sec. CUA-42-70003 42 style models (e.g. CUA-42-70010) have bracket mount case. 120VAC 5 Sec. Fixed 1 CUA-41-70005 51 style models (e.g. CUB-51-70010) have plain case with knob. 10 Sec. CUA-41-70010 10 Sec. CUA-42-70010 30 Sec. CUA-42-70030 120 Sec. CUA-41-70120 Outline Dimensions 41 Style 51 Style 42 & 45 Style 1.531 MAX. ➛➛(38.89) 1.406 MAX. .375 .645 TYP.➛➛(35.71) ➛➛(15.88) (9.53) .07 .312 TYP. ➛(1.78)➛➛➛➛(7.92) ➛ ➛ ➛.625 MAX.➛ (15.88) ➛ ➛ 1.906 MAX. (48.41) 1.906 MAX. 2.500 (48.41) 2.156 MAX. (63.50) (15.46) 2.90 MAX. ➛(73.66) ➛➛.281 REF. (7.14)➛ .437 ➛➛ (11.10) .281 REF. 1.531 MAX.➛➛ (7.14)➛➛(38.89)➛ ➛➛➛➛➛.06 .078 R TYP. 12 3➛ .75 ± .015 (1.98) (1.52) 45 6 (19.05 ± .38) Terminal Dimensions 78 9 1.406 MAX. .187" (4.74mm) (35.71) Quick Connect/Solder A B➛➛.078 .125➛➛ (1.98) (3.18) ➛ SEATED HEIGHT ABOVE .187 ± .002 CHASSIS MOUNTED (4.75 ± .05) ➛IN SOCKET : (57.2mm) ➛.250➛➛ (6.35) HEADER .281 REF. ➛➛ (7.14) THICKNESS 0.20 (.51) Wiring Diagrams – Bottom Views ➛ 1 3 1 3➛➛2➛➛ 46 4 6 5➛➛➛➛ 7 9 7 9 A B A B + - + - INPUT INPUT (DC DC POLARITY INDICATED) ** (DC POLARITY INDICATED) ** Fig. 1 Fig. 2 ** Note: Input polarity for DC operation. For most reliable operation on AC, connect high side to “+” and low side to “–”. External Resistor Selection Chart See External Resistor Selection Charts at beginning of Time Delay Relay section of this Databook. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1232 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT MD0 series Subminiature, On-Delay Time Delay Relay • On-delay timing mode • Seven user-selectable timing ranges (0.1 sec. to 10 hr.) • High accuracy and reliability • Exceptional transient protection (ANSI C37.90) • 5A DPDT or 4PDT output contacts • Universal voltage File E60363 File LR51332 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25°C Voltage: Universal: 24-240VAC, 50/60 Hz. or 24-125VDC. On-Delay. Power Requirement: 2W, max. Transient Protection: Meets ANSI C37.90 Transient Specification. Environmental Data Temperature Range: Storage: -25°C to +85°C. Operating: -25°C to +60°C. Timing Specifications Timing Ranges: Instantaneous; 0.1 to 1 / 1 to 10 / 10 to 100 sec.; 1 to 10 / 10 to 100 min.; 1 to 10 hr. Timing Range Selection: Screwdriver select via recessed dial on side. Timing Adjustment: Screwdriver adjust via recessed dial with reference Mechanical Data calibrations on top. Accuracy: Repeat Accuracy: ±0.5% Mounting/Termination: MD0 series time delay relays can be socket Overall Accuracy: ±1% ±0.02 sec. mounted horizontally or vertically and will Reset Time: 25 ms. operate within repeat accuracy of ±0.5%. Sockets: Fits either 27E166 or 27E894 (snap-on) screw terminal sockets. Status Indication: Power On LED and Output Contacts LED. Weight: 4 oz. (96g) approximately. Contact Data @ 25°C Arrangements: 2 Form C (DPDT) or 4 Form C (4PDT). Rating: 5A @ 30VDC or 240VAC, resistive. Expected Electrical Life: 100,000 operations, min., at rated resistive load. Outline Dimensions Ordering Information 3.00 (76.2) .85 Part Number Contacts Input Voltage 2.75 (21.6) (69.8) MD012AU DPDT Universal MD014AU 4PDT 24-240VAC, 50/60 Hz. or 24-125VDC 1.05 (26.7) Authorized distributors are likely to stock the following: MD014AU Wiring Diagrams (Bottom Views) Terminal Base Diagram NOTE: Only necessary terminals are present on DPDT models. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1233 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SSC series Specification Grade Discrete Plug-in Time Delay Relay • On-Delay, Off-Delay and Interval timing modes • 13 timing ranges from 0.1 sec. to 60 min. • 10A DPDT output contacts • Escellent repeatability of ±1% or better. • Exceptional immunity to transients and noise. • Wide operating temperature range. File 3520 File LR29186 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Input Data @ 25°C Timing Modes On-Delay, Off-Delay and Interval. Voltage: See Ordering Information section for details. Power Requirement: 3W, max. Transient Protection: Non-repetitive transients of the following magni- Timing Specifications tudes will not cause spurious operation of affect function and accuracy. Timing Ranges: 6 to 180 cycles; 0.1 to 3 / 0.1 to 10 / 0.33 to 10 / 1 to 30 / 4 Operating Voltage <0.1 ms <1 ms to 120 sec.; 0.33 to 10 / 1 to 30 / 2 to 60 min.; 0.33 to 10 12VDC 1,000V 240V* hr. (All are +10%, –1% of maximum values). 24VAC/VDC 1,000V 240V* Timing Adjustment: Knob or fixed time (internal fixed resistor) – all models; 48 VAC/VDC 1,000V 480V* customer supplied external potentiometer or resistor 120 VAC/VDC 3,000V 2,500V* – On-Delay and Interval models only. 240VAC 3,000V 2,500V* Accuracy: Repeat Accuracy: ±1% ±0.004 sec. at any combination of operating temperature and voltage. * Minimum source impedance of 100 ohm. Overall Accuracy: ±5.25% throughout operating temperature and voltage ranges. Environmental Data Reset Time: 25 ms. (minimum deenergized interval for on-delay or off-delay Temperature Range: Storage: -40°C to +85°C. models, or minimum required closure interval for interval Operating: -30°C to +65°C. models without affecting accuracy.) Relay Operate Time: Off-Delay mode only: 35 ms. Mechanical Data Relay Release Time: On-Delay mode only: 20 ms. Mounting/Termination: 8- or 11-pin octal type plug. 8-pin types fit either 27E122 or 27E891, while 11-pin types fit 27E123 or 27E892. Contact Data @ 25°C Weight: 4 oz. (112g) approximately. Arrangements: 2 Form C (DPDT). Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC. Ordering Information Expected Mechanical Life: 10 million operations. 01 SSC 2 A A A Expected Electrical Life: 500,000 operations, min., at rated resistive load. | | | | | | Initial Dielectric Strength | | | Series SSC Output Timing Range Between Terminals and Case: 1,000VAC plus twice the nominal voltage Discrete | 2 = DPDT Relay A =0 .1 to 3 sec. | | for one minute. Industrial B = 0.5 to 15 sec. | | | Timer C = 1 to 30 sec. | Outline Dimensions | | D = 2 to 60 sec. Operating Mode | E = 4 to 120 sec. | 1.97 .70 3.25 (50) (18) (83) 01 = On-Delay F = 6 to 180 sec. | | 02 = Off-Delay G = 10 to 300 sec. | | 03 = Interval I = 2 to 60 min. 1.97 | | K = 3 to 180 cycles (50) L = 0.33 to 10 min. | | M = 0.5 to 15 min. | | N = 1 to 30 min. | | P = 0.1 to 10 min. Wiring Diagrams (Bottom Views) Operating Voltage Timing Adjustment Insulated, shielded two- (+10%, –15%) A = Knob Adjust conductor cable similar to Belden 8719, 8720 or A = 120VAC, 50/60 Hz. B = External 8769 required for leads / 120VDC Potentiometer or longer than 6 inches. B = 240VAC, 50/60 Hz. resistor (Operating Max. permissble length is 50 feet. E = 24VAC, 50/60 Hz. / modes 1 and 3 only). 24VDC F = Fixed Times – F = 48VAC, 50/60 Hz. / Specify time delay 48VDC in seconds per the Q = 12VDC (±10%) following examples: F9.000 = 9 sec. F99.00 = 99 sec. F999.0 = 9999 sec. F1000 = 1000 sec. Off-Delay On-Delay & Interval On-Delay & Interval Authorized distributors are likely to stock the following: Fixed or Knob Fixed or Knob External Potentiomer SSC12AAA SSC12ACA SSC12AGA Adjust Adjust or Resistor Adjust SSC12ABA SSC12ADA SSC12ALA. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1234 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SCB/SCC series Specification Grade Discrete Plug-in Time Delay Relay • On-Delay, Off-Delay and Interval timing modes • 13 timing ranges from 0.1 sec. to 60 min. • 10A DPDT output contacts • Knob, fixed or external timing adjustment. • Rated for pilot duty • Premium components File 3520 File E60363 ® File LR51332 ® File E60363 (SCC only) Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Input Data @ 25°C Timing Modes On-Delay, Off-Delay and Interval. Voltage: See Ordering Information section for details. Power Requirement: 3W, max. Transient Protection: Non-repetitive transients of the following magni- tudes will not cause spurious operation of affect function and accuracy. Timing Specifications Operating Voltage <0.1 ms <1 ms Timing Ranges: 6 to 180 cycles; 0.1 to 3 / 0.1 to 10 / 0.33 to 10 / 1 to 30 / 4 All except 12 & 24 3,000V 2,500 to 120 sec.; 0.33 to 10 / 1 to 30 / 2 to 60 min.; 0.33 to 10 12 & 24 Consult Factory hr. (All are +5%, –0% of maximum values). Timing Adjustment: Knob or fixed time (internal fixed resistor) – all models; Environmental Data customer supplied external potentiometer or resistor – On-Delay and Interval models only. Temperature Range: Accuracy: Repeat Accuracy: ±0.5% ±0.004 sec. Storage: SCB and SCC: -40°C to +85°C. Overall Accuracy: ±2% max. Operating: SCB: -30°C to +65°C; SCC: -30°C to +50°C. Reset Time: 25 ms. Mechanical Data Relay Operate Time: Off-Delay mode: 30 ms; Interval mode: 20 ms.. Relay Release Time: On-Delay mode only: 15 ms. Mounting/Termination: SCB: UL recognized. Optional 8- or 11-pin octal-type sockets may be ordered separately. SCC: 8- or 11-pin octal type sockets supplied with timer. (Must be used Contact Data @ 25°C to qualify as "UL Listed" device.) Arrangements: 2 Form C (DPDT). Weight: SCB: 5.3 oz. (149g) approx.; SCC: 7.5 oz. (210g) approx. Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC; 345VA. Same polarity. Ordering Information (All "X's" must be included to complete part number) Expected Mechanical Life: 10 million operations. SCB RX 2XX A A XA Expected Electrical Life: 500,000 operations, min., at rated resistive load. 01 | | | | | | | | | | | Initial Dielectric Strength Series SCB Operating Mode Timing Range Series SCC 01 = On-Delay A =0 .1 to 3 sec. | | | | Between Terminals and Case: 1,000VAC plus twice the nominal voltage Discrete 02 = Off-Delay B = 0.5 to 15 sec. for one minute. | | | | Industrial 03 = Interval C = 1 to 30 sec. | | | | Timer D = 2 to 60 sec. Outline Dimensions | | E = 4 to 120 sec. | Output F = 6 to 180 sec. 1.97 .70 3.25 2XX = DPDT | | | (50) (18) (83) G = 10 to 300 sec. Relay | | | I = 2 to 60 min. | | K = 3 to 180 cycles Mounting Series SCB 1.97 (50) RX = 8- or 11-pin L = 0.33 to 10 min. | | M = 0.5 to 15 min. socket (order | | separately) N = 1 to 30 min. | | P = 0.1 to 10 min. Mounting Series SCC Wiring Diagrams (Bottom Views) LA = 8-pin socket p/n | | BCSA08SC for Insulated, shielded two- Operating Voltage Timing Adjustment operating mode conductor cable similar (+10%, –15%) XA = Knob Adjust to Belden 8719, 8720 or 01 or 03 with knob A = 120VAC, 50/60 Hz. XB = External 8769 required for leads adjust or fixed / 120VDC Potentiometer or longer than 6 inches. time. Max. permissble length B = 240VAC, 50/60 Hz. resistor (Operating LC = 11-pin socket p/n is 50 feet. E = 24VAC, 50/60 Hz. / modes 1 and 3 only). BCSA11SC for 24VDC XF =Fixed Times – operating mode F = 48VAC, 50/60 Hz. / Specify time delay 02; or 01 or 03 48VDC in seconds per the with external Q = 12VDC following examples: potentiometer or XF9.000 = 9 sec. resistor. XF99.00 = 99 sec. XF999.0 = 9999 sec. XF1000 = 1000 sec. Off-Delay On-Delay & Interval On-Delay & Interval Fixed or Knob Fixed or Knob External Potentiomer Authorized distributors are likely to stock the following: Adjust Adjust or Resistor Adjust None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1235 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT STA series Specification Grade Discrete Plug-in Time Delay Relay With QC Terminals • On-Delay, Off-Delay, Interval and Accumulating On-Delay timing modes • 13 timing ranges from 0.1 sec. to 48 hr. • 10A DPDT output contacts • Knob, fixed or external timing adjustment. • QC plug-in terminals save space, two LEDs show status File 3520 File E60363 ® File LR51332 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Input Data @ 25°C On-Delay, Off-Delay, Interval and Accumulating On-Delay. Voltage: See Ordering Information section for details. Power Requirement: 3W, max. Transient Protection: Non-repetitive transients of the following magni- Timing Specifications tudes will not cause spurious operation of affect function and accuracy. Timing Ranges: 6 to 180 cycles; 0.1 to 3 / 0.5 to 15 / 1 to 30 / 2 to 60 / Operating Voltage <0.1 ms <1 ms 4 to 120 / 6 to 180 / 10 to 300 sec.; 0.33 to 10 / 0.5 to 15 / All except 12 & 24 3,000V 2,500 1 to 30 min.; 1 to 6 / 2 to 48 hr. (All are +5%, –0% of 12 & 24 Consult Factory maximum values). Timing Adjustment: Knob or fixed time (internal fixed resistor) – all models; Environmental Data customer supplied external potentiometer or resistor – On-Delay and Interval models only. Temperature Range: Storage: -40°C to +85°C. Accuracy: Repeat Accuracy: ±.5% ±0.004 sec.. Operating: -30°C to +65°C. Overall Accuracy: ±2% throughout operating temperature and voltage ranges. Mechanical Data Reset Time: 30 ms. min. (between deenergization and reenergization Mounting/Termination: Quick connect terminals fit either 27E121 or without affecting accuracy.) 27E893 (snap-on) socket (order separately). Relay Operate Time: Off-Delay mode: 35 ms.; Interval mode: 20 ms. Status Indication: Power On LED and Output Contacts LED (optional). Relay Release Time: On-Delay and Accumulating On-Delay modes: 20 ms. Weight: 4.2 oz. (119g) approximately. Ordering Information (All "X's" must be included to complete part number) Contact Data @ 25°C Arrangements: 2 Form C (DPDT). RX S STA 01 2X A A XA Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC; 345VA. | | | | | | | Same polarity. | Expected Mechanical Life: 10 million operations. | | Status | | Series STA Operating Mode Timing Range Expected Electrical Life: 500,000 operations, min., at rated resistive load. Discrete 01 = On-Delay Indication A =0 .1 to 3 sec. | | | | S = LEDs Industrial 02 = Off-Delay B = 0.5 to 15 sec. | | | | Timer 03 = Interval X = No LEDs C = 1 to 30 sec. Initial Dielectric Strength | | | | With 09 = Accumulating D = 2 to 60 sec. Between Terminals and Case: 1,000VAC plus twice the nominal voltage Tab-type | On-Delay E = 4 to 120 sec. | | | for one minute. Terms. F = 6 to 180 sec. | | | Output G = 10 to 300 sec. Outline Dimensions 2X = DPDT | | | I = 2 to 60 min. Relay | J = 1 to 6 hr. | Mounting Series RX = 11-pin tab-type K = 3 to 180 cycles | | 1.500 MAX. L = 0.33 to 10 min. header (order (38) | | socket M = 0.5 to 15 min. | | N = 1 to 30 min. separately) .281 REF. .660 MAX. 3.045 1.390 MAX. R = 2 to 48 hr. | | (7) (17) (77) (35) Operating Voltage Timing Adjustment (+10%, –15%) XA = Knob Adjust Wiring Diagrams (Bottom Views) A = 120VAC, 50/60 XB = External Hz. / 120VDC Potentiometer or Insulated, shielded two-conductor E = 24VAC, 50/60 resistor (Operating cable similar to Belden 8719, 8720 or 8769 required for leads longer Hz. / 24VDC modes 1 and 3 than 6 inches. Maximum F = 48VAC, 50/60 only). permissble length is 50 feet. Hz. / 48VDC XF =Fixed Times – Q = 12VDC Specify time delay in seconds per the following examples: XF9.000 = 9 sec. XF99.00 = 99 sec. XF999.0 = 9999 sec. XF1000 = 1000 sec. Off-Delay & On-Delay On-Delay Accumulating & & Authorized distributors are likely to stock the following: On-Delay Interval Interval Fixed or Knob Fixed or Knob External Potentiomer None at present. Adjust Adjust or Resistor Adjust Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1236 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SRC series Specification Grade Repeat Cycle Plug-in Time Delay Relay • Repeat Cycle timing mode • Dual knobs for user adjustment of on and off times. • 13 timing ranges from 0.1 sec. to 60 min. • 10A DPDT output contacts • Exceptional immunity to line transients and noise • Premium components enhance reliability • Superior reset time of 24 msec. Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Modes Input Data @ 25°C Repeat Cycle: Application of line voltage starts the pre-set OFF-time period Voltage: See Ordering Information section for details. Upon expiration of the period, the output relay is energized, its contacts Power Requirement: 3W, max. transfer, and the pre-set ON-time period begins. At the end of this period Transient Protection: Non-repetitive transients of the following magni- the output relay is deenergized, and a new cycle begins. The OFF and ON tudes will not cause spurious operation of affect function and accuracy. cycles continue until power is removed. To reset the timer, input voltage Operating Voltage <0.1 ms <1 ms must be removed for at least 25 ms. 12VDC 1,000V 240V* 24VAC/VDC 1,000V 240V* Timing Specifications 48 VAC/VDC 1,000V 480V* Timing Ranges: OFF time and ON time ranges need not be the same. 120 VAC/VDC 3,000V 2,500V* 6 to 180 cycles; 0.1 to 3 / 1 to 10 / 0.5 to 15 / 1 to 30 / 2 to 240VAC 3,000V 2,500V* 60 / 4 to 120 / 6 to 180 / 10 to 300 sec.; 0.33 to 10 / 0.5 to 15 / 1 to 30 / 2 to 60 min. (All are +10%, –1% of maximum * Minimum source impedance of 100 ohm. values). Timing Adjustment: Two internal potentiometers with external knobs. Environmental Data Accuracy: Repeat Accuracy: ±1% ±0.004 sec.. Temperature Range: Storage: -40°C to +85°C. Overall Accuracy: ±2.25% max. Operating: -30°C to +65°C. Reset Time: 25 ms. max. (between deenergization and reenergization without affecting accuracy.) Mechanical Data Relay Operate Time: 20 ms. Relay Release Time: 15 ms. Mounting/Termination: Quick connect terminals fit either 27E121 or 27E893 (snap-on) socket (order separately). Weight: 5.3 oz. (149g) approximately. Contact Data @ 25°C Arrangements: 2 Form C (DPDT). Ordering Information Rating: 10A @ 28VDC or 120VAC, resistive; 1/3 HP @ 120/240VAC. Expected Mechanical Life: 10 million operations. SRC 7 2 A C C A Expected Electrical Life: 500,000 operations, min., at rated resistive load. | | | | | | | Initial Dielectric Strength | | | Series SRC Output Timing Range Timing Between Terminals & Case and Mutually Isolated Contacts: 1,480VAC. Repeat 2 = DPDT Off-Time Adjustment | | | Cycle Relay A =0 .1 to 3 sec. A = Dual Knob | | | Outline Dimensions Timer. B = 0.5 to 15 sec. Adjust | | | C = 1 to 30 sec. | D = 2 to 60 sec. | Operating Mode 1.97 3.7 MAX. E = 4 to 120 sec. 7= Repeat Cycle | | (50) .40 (94) F = 6 to 180 sec. (10) | | G = 10 to 300 sec. | | I = 2 to 60 min. 1.97 K = 3 to 180 cycles | | (50) L = 0.33 to 10 min. | Timing Range M = 0.5 to 15 min. On-Time | N = 1 to 30 min. A =0 .1 to 3 sec. | P = 0.1 to 10 sec. B = 0.5 to 15 sec. Operating Voltage C = 1 to 30 sec. (+10%, –15%) D = 2 to 60 sec. Wiring Diagram (Bottom View) A = 120VAC, 50/60 E = 4 to 120 sec. Hz. / 120VDC F = 6 to 180 sec. B = 240VAC, 50/60 G = 10 to 300 sec. Hz. I = 2 to 60 min. E = 24VAC, 50/60 K = 3 to 180 cycles Hz. / 24VDC L = 0.33 to 10 min. F = 48VAC, 50/60 M = 0.5 to 15 min. Hz. / 48VDC N = 1 to 30 min. Q = 12VDC P = 0.1 to 10 sec. Authorized distributors are likely to stock the following: None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1237 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SST series Industrial Grade Discrete Plug-in Time Delay Relay • On-Delay, Off-Delay, Interval, One Shot & Repeat modes • Time delays to 120 min. • Fast setting with time calibrated knobs. • Superior transient protection. • Rugged construction with 8- or 11-pin plug. • Flame retardant housing. File E15631 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Mechanical Data Timing Modes On-Delay, Off-Delay, Interval, One Shot (Latching Interval) or Repeat Cycle. Mounting/Termination: On-Delay, Interval and Repeat types have 8- pin octal plug that fits either 27E122 or 27E891 socket. Off-Delay and One Timing Specifications Shot types have 11-pin octal-type plug that fits 27E123 or 27E892. Sockets Timing Ranges: Nine ranges spanning 0.1 sec. to 120 min. must be orderd separately. Weight: 4 oz. (112g) approximately. Timing Adjustment: Knob adjust. Accuracy: Repeat Accuracy: ±1%. Overall Accuracy: ±5%. Ordering Information Reset Time: 50 ms., max., (25 ms typ.) for on-delay and interval; 300 ms, SST2 – Off Delay Types SST1 – On Delay Types max., for off-delay and one shot; 500 ms, max., for repeat type. Input Time Range Part No. Input Time Range Part No. Relay Operate Time: 50 ms. Relay Release Time: 30 ms. 120 0.1 - 10 sec. SST22AAA 120 0.1 - 10 sec. SST12AAA VDC 1.8 - 180 sec. SST22ADA VAC 0.6 - 60 sec. SST12ACA Contact Data @ 25°C 3 - 300 sec. SST22AEA 1.8 - 180 sec. SST12ADA 18 sec. - 30 min. SST22AGA 3 - 300 sec. SST12AEA Arrangements: 2 Form C (DPDT). 36 sec. - 60 min. SST22AHA 18 sec. - 30 min. SST12AGA Rating: 10A @ 120/240VAC, resistive; 1/3 HP @ 120/240VAC, 50/60 Hz. 36 sec. - 60 min. SST12AHA 24 0.1 - 10 sec. SST22EAA Expected Mechanical Life: 10 million operations. VDC 1.8 - 180 sec. SST22EDA Expected Electrical Life: 500,000 operations, min., at rated resistive load. 24 0.1 - 10 sec. SST12EAA VAC 1.8 - 180 sec. SST12EDA 24 0.1 - 10 sec. SST22OAA Initial Dielectric Strength 3 - 300 sec. SST12EEA VDC 1.8 - 180 sec. SST22ODA 24 0.1 - 10 sec. SST12OAA Between Contacts, Line Inputs and Control Circuits: 12 0.1 - 10 sec. SST22QAA VDC 1.8 - 180 sec. SST12ODA 1,500V RMS, minimum, at 60 Hz. VDC 1.8 - 180 sec. SST22QDA 3 - 300 sec. SST12OEA Input Data @ 25°C 12 0.1 - 10 sec. SST12QAA VDC 1.8 - 180 sec. SST12QDA Voltage: See Ordering Information section for details. 3 - 300 sec. SST12QEA Power Requirement: 3W, max. Transient Protection: Non-repetitive transients of the following magni- tudes will not cause spurious operation of affect function and accuracy. SST3 – Interval Types SST4 – One Shot* Types Operating Voltage <0.1 ms <1 ms Input Time Range Part No. Input Time Range Part No. 12 & 24 VAC/VDC 860V 208V* 120 0.1 - 10 sec. SST42AAA 120 0.1 - 10 sec. SST32AAA 120 VAC 2,580V 2,150V* VAC 1.8 - 180 sec. SST32ADA VDC 1.8 - 180 sec. SST42ADA 3 - 300 sec. SST42AEA 3 - 300 sec. SST32AEA * Minimum source impedance of 100 ohm. 18 sec. - 30 min. SST42AGA 36 sec. - 60 min. SST32AHA 36 sec. - 60 min. SST42AHA Environmental Data 24 0.1 - 10 sec. SST32EAA 24 0.1 - 10 sec. SST42EAA VAC 1.8 - 180 sec. SST32EDA Temperature Range: Storage: -23°C to +71°C. VDC 1.8 - 180 sec. SST42EDA Operating: -23°C to +54°C. 24 0.1 - 10 sec. SST32OAA 24 0.1 - 10 sec. SST42OAA VDC 1.8 - 180 sec. SST32ODA VDC 1.8 - 180 sec. SST42ODA Outline Dimensions 12 0.1 - 10 sec. SST32QAA 12 0.1 - 10 sec. SST42QAA VDC 1.8 - 180 sec. SST32QDA VDC 1.8 - 180 sec. SST42QDA 2.0 MAX. * Also known as Latching Interval (50.8) SST7 – Repeat Cycle Types SQUARE Input Time Range Part No. .812 MAX. 120 0.1 - 10 sec. SST72AAA 3.20 MAX. (20.6) (81.3) VDC 1.8 - 180 sec. SST72ADA 4.60 MAX. 3 - 300 sec. SST72AEA (116.8) 18 sec. - 30 min. SST72AGA 36 sec. - 60 min. SST72AHA Wiring Diagrams (Bottom Views) 24 0.1 - 10 sec. SST72EAA VDC 1.8 - 180 sec. SST72EDA 24 0.1 - 10 sec. SST72OAA VDC 1.8 - 180 sec. SST72ODA 12 0.1 - 10 sec. SST72QAA VDC 1.8 - 180 sec. SST72QDA Authorized distributors are likely to stock the following: None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1238 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT SCE series Specification Grade Discrete Plug-in True Off-Delay Time Delay Relay • True Off-Delay timing modes • Six time delays from 0.1 sec. to 10 min. • 10A SPDT or 5A DPDT output contacts. • Excellent repeat accuracy – typically better than ±1%. • 8--pin octal plug. File E15631 ® File LR51332 CAUTION: Users should thoroughly review the technical data before selecting a product part If unit has not been energized for several months, apply operating number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the voltage for 20 minutes prior to initial time delay. requirements for a given application. Timing Modes Initial Dielectric Strength True Off-Delay – Upon application of operating voltage (min. 100ms), Between Terminals and Case and relay contacts and active circuitry: output relay contacts transfer. When operating voltage is removed, the 1,480VAC for one minute. time delay period is initiated. At the end of the delay period, output relay contacts release. If operating voltage is reapplied prior to expiration of the Input Data @ 25°C delay period, the delay will be cancelled and output relay contacts will remain transferred. Voltage: See Ordering Information section for details. Power Requirement: 750mw. Transient Protection: 1,000V plus twice rated voltage for 0.1 ms. Timing Specifications Timing Ranges: 0.1 to 3 / 0.5 to 15 / 1 to 30 / 4 to 120 / 10 to 300 sec.; Environmental Data 0.33 to 10 min. Temperature Range: Storage: -40°C to +85°C. Timing Adjustment: Knob adjustment - Internal potentiometer with Operating: -30°C to +65°C. external knob adjustment. Maximum time calibrated with +10%, –0% of values shown below at rated voltage, at 68°F. Fixed time – internal fixed resistor. Mechanical Data Accuracy: Repeat Accuracy: ±1. Mounting/Termination: 8-pin octal plug fits either 27E122 or 27E891 Overall Accuracy: ±5%. (snap-on) socket (order separately). Reset Time: 30 ms. min. Weight: 4 oz. (112g) approximately. Relay Operate Time: 30 ms. Contact Data @ 25°C Ordering Information Arrangements: 1 Form C (SPDT) and 2 Form C (DPDT). SCE R X 2 2 A C A Rating: 1 Form C: 10A @ 120/240VAC, resistive; 1/3 HP @ 120VAC; 345VA | | | | | | | | @ 120VAC; 1/4 HP @ 240VAC; 275VA @ 240VAC. Same polarity. 2 Form C: 5A @ 28VDC or 120/240VAC, resistive; 1/6 HP @ 120/ | | | | Series SCE Output Rating Output Timing Range 240VAC; 200VA @ 120/240VAC. Same polarity. True W = 10A (SPDT) 1 = SPDT (W) A =0 .1 to 3 sec. | | | | Expected Mechanical Life: 10 million operations. Off-delay X = 5A (DPDT) 2 = DPDT (W) B = 0.5 to 15 sec. | | | | Expected Electrical Life: 200,000 operations, min., at rated resistive load. Timer C = 1 to 30 sec. | | | | E = 4 to 120 sec. Outline Dimensions | G = 10 to 300 sec. | Agency Operating L = 0.33 to 10 min. Recognition Mode | | 1.97 .60 3.25 R = UL recognized 2 = True (50) (15) (83) | | Off-Delay | | | Operating Voltage 1.97 (+10%, –15%) | (50) A = 120VAC, 50/60 | Hz. / 125VDC | E = 24VAC, 50/60 Hz. / 24VDC Timing Adjustment Wiring Diagrams (Bottom Views) F = 48VAC, 50/60 A = Knob Adjust Hz. / 48VDC F = Fixed Times – Specify time delay in seconds per the following examples: XF9.000 = 9 sec. XF99.00 = 99 sec. XF999.0 = 9999 sec. XF1000 = 1000 sec. Fixed Time Fixed Time Or Knob Adjust Or Knob Adjust Authorized distributors are likely to stock the following: None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1239 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTM-1 series Specification Grade, On-Delay Timing Module • On-delay timing mode • Timing from 1 to 1000 sec. • 1A solid state SPST-NO output • 0.25" (6.35) quick connect terminals • Universal voltage: 24 to 240VAC/VDC • Rated to 10 million operations File E60363 File LR51332 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25°C Operating Voltage: Universal: 24-240VAC/VDC (19-288VAC/VDC). On-Delay – VTM-1 in-line timing module is wired in series with the load circuit. Time delay is initiated when power is applied to the series network. Current: 2mA (max.) required to operate timer regardless of output state. Power Requirement: 3W, max. Connecting a resistor across the center terminals provides tamper-proof setting of time delay from 1-1000 sec. Transient Protection: MOV across input 2,000V for 11μs on line side of load. Timing Specifications Timing Ranges: 1 to 1,000 sec. Timing Adjustment: Time delay is set by connecting an appropriately rated Environmental Data resistor or potentiometer between the center two Temperature Range: Storage: -40°C to +85°C. terminals. As supplied, the unit provides a nominal 1 Operating: -30°C to +65°C. second delay. Add 10k ohm of resistance for every additional second of delay required. For example: 5 seconds = 40k ohms; 10 seconds = 90k ohms. Accuracy: Repeat Accuracy: ±2% Reset Time: 100 ms, max., in the timing or time-out condition. Mechanical Data Output Switch Data Mounting: Screw mount in horizontal or vertical position through built-in mounting ears. Arrangement: 1 Form A (SPST-NO). Termination: 0.250 in (6.35) quick connect terminals for input line, load Rating: 5A, inductive, at nominal operating voltage. output and timing resistor connection. Inrush: Not to exceed 10A for one cycle. Weight: 3 oz. (84g) approximately. Max. Leakage Current: 4mA rms. Expected Electrical Life: 10,000,000 operations at rated load. Initial Dielectric Strength Between Active Terminals and Outside of Case: 1,480VAC for one min. Outline Dimensions Ordering Information Part Number Mode Input Voltage VTM-1 On-Delay 24-240VAC or VDC Authorized distributors are likely to stock the following: VTM-1 Wiring Diagram Notes: 1. Do not operate timer without connecting load in series with line voltage. 2. For a time delay of 1 second, connect a jumper across the center two terminals. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1240 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTM1 series On-Delay Timing Module • On-delay timing mode • Reliable solid state timing circuitry. • Excellent transient protection. • Compact design. • Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25°C On-Delay. Voltage: 12 VAC/VDC, 24VAC/VDC, 120 VAC/VDC. Power Requirement: 3W, max. Timing Specifications Transient Protection: Non-repetitive transients of the following magni- tudes will not cause spurious operation of affect function and accuracy. Timing Ranges: 0.5 to 10 / 3 to 60 sec.; 0.5 to 10 / 3 to 60 min. Timing Adjustment: External resistor or potentiometer. An external Operating Voltage <0.1 ms <1 ms resistance of 1 megohm is required to obtain the 12, 24 VAC/VDC 860V* 208V* maximum time for all ranges. To determine the actual 120 VAC/VDC 2,580V 2,150V* resistance needed to obtain the required time delay, use the following formula: * Min. source impedance of 100 ohm. T - T req min R = x 1,000,000 ohms t (T - T ) max min Environmental Data Accuracy: Repeat Accuracy: ±1% Overall Accuracy: ±2% at R = 1 megohm. Temperature Range: Storage: -40°C to +85°C. Reset Time: 100 ms, max., before time-out; 10 ms, max., after time-out. Operating: -40°C to +65°C. Output Switch Data Arrangement: Solid state 1 Form A (SPST-NO). Rating: 1A, inductive, at nominal operating voltage. Mechanical Data Expected Electrical Life: 10,000,000 operations at rated load. Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Weight: 3 oz. (84g) approximately. Initial Dielectric Strength Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions Ordering Information 1.25 VTM1 A CD 2.00 (31.8) (50.8) .885 || | (22.5) Series VTM1 Input Voltage Time Range On-Delay A = 120VAC/VDC CD = 0.5 - 10 sec. 2.00 Timing Module E = 24VAC/VDC DD = 3 - 60 sec. (50.8) Q = 12VAC/VDC FD = 0.5 - 10 sec. GD = 3 - 60 sec. .250 (6.35) X .032 (.813) .170 DIA (4.32) ACCEPTS #8 SCREW QUICK CONNECTS Wiring Diagram An external resistance of 1 megohm is Authorized distributors are likely to stock the following: required to obtain the maximum time for all ranges. To determine the actual VTM1ECD LOAD resistance needed to obtain the VTM1EDD required time delay, use the following INPUT VOLTAGE formula: T - T req min R = x 1,000,000 ohms t ( ) T - T max min Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1241 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTMA1 series On-Delay Timing Module With Internal Potentiometer • On-delay timing mode • Discrete voltage or universal type. • Internal potentiometer for timing adjustment. • Reliable solid state timing circuitry. • Excellent transient protection. • Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25°C On-Delay. Voltage: ±10% 120VAC/VDC (unfiltered DC must be full-wave rectified) or 24 to 240 VAC/VDC. Timing Specifications Power Requirement: 250mW during timing; 3W, max. after time out. Transient Protection: Non-repetitive transients of the following magni- Timing Ranges: VMTA1ULA only: 24 to 480 sec. All others: 0.5 to 10 / 3 to 60 /15 to 300 sec.; 3 to 60 min. tudes will not cause spurious operation of affect function and accuracy. Timing Adjustment: Internal potentiometer. Operating Voltage <0.1 ms <1 ms Accuracy: Repeat Accuracy: ±5% 24 VAC/VDC 860V* 208V* Overall Accuracy: Max. Time: –0%, +10%. 120/240 VAC/VDC 2,580V 2,150V* Min. Time: –30%, +10%. Reset Time: 250 ms, max., before time-out; 10 ms, max., after time-out. * Min. source impedance of 100 ohms. Current Drain: 2mA, Max. Output Switch Data Environmental Data Temperature Range: Storage: -40°C to +85°C. Arrangement: Solid state 1 Form A (SPST-NO). Rating: 1A, inductive, at nominal operating voltage. Operating: -40°C to +65°C. Expected Electrical Life: 10,000,000 operations at rated load. Mechanical Data Mounting: Panel mount with one #8 screw. Initial Dielectric Strength Termination: 0.250 in (6.35) quick connect terminals. Between Terminals and Mounting: 3,000VAC rms. Weight: 4 oz. (112g) approximately. Between Input and Output: 1,500VAC rms. Outline Dimensions amd Wiring Diagram Ordering Information Part Number Time Range Input Voltage VTMA1ACA 0.5 to 10 sec. 2.00 1.25 120VAC or VDC VTMA1ADA 3 to 60 sec. (50.8) (31.8) .388 .885 (9.85) VTMA1ACA 24 to 480 sec. 24-240VAC or VDC (22.5) TIME DELAY .427 ADJUSTMENT (10.8) 2.00 .170 DIA (50.8) (4.32) ACCEPTS #8 SCREW .250 (6.35) X .032 (.813) INPUT LOAD VOLTAGE QUICK CONNECTS L1 L2 Authorized distributors are likely to stock the following: None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com Technical support: reference purposes only. (millimeters) unless otherwise subject to change. 1242 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTMR1 series On-Delay Timing Module With Internal Potentiometer, Relay Output • On-delay timing mode • 8A SPDT relay output. • Internal potentiometer for timing adjustment. • Reliable solid state timing circuitry. • Excellent transient protection. • Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25°C On-Delay. Voltage: ±10% 120VAC/VDC. Power Requirement: 3.5VA, max. Timing Specifications Transient Protection: Non-repetitive transients of the following magni- tudes will not cause spurious operation of affect function and accuracy. Timing Ranges: 15 to 300 sec. Timing Adjustment: Internal potentiometer. Operating Voltage <0.1 ms <1 ms Accuracy: Repeat Accuracy: ±5% max. (0.25% typ.) 120 VAC/VDC 2,580V 2,150V* Overall Accuracy: Max. Time: –0%, +10%. * Min. source impedance of 100 ohms. Min. Time: –30%, +10%. Reset Time: 250 ms, max. Current Drain: 30mA, Max. Environmental Data Output Contact Data Temperature Range: Storage: -40°C to +70°C. Arrangement: 1 Form C (SPDT). Operating: -40°C to +70°C. Rating: 8A, resistive, at nominal operating voltage. Expected Mechanical Life: 10,000,000 operations. Expected Electrical Life: 100,000 operations. Mechanical Data Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Initial Dielectric Strength Weight: 4 oz. (112g) approximately. Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions and Wiring Diagram Ordering Information 2.00 Part Number Time Range Input Voltage (50.8) .763 OUTPUT RELAY (19.4) VTMR1AEA 15 to 300 sec. 120VAC .278 (7.06) OUTPUT RELAY .286 TIME (7.26) DELAY ADJUST 2.00 (50.8) INPUT VOLTAGE .885 .170 DIA (22.5) (4.32) .250 (6.35) X .032 (.813) ACCEPTS 1.25 QUICK CONNECTS (31.8) #8 SCREW Authorized distributors are likely to stock the following: None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1243 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTM2 series Off-Delay Timing Module • Off-delay timing mode • Reliable solid state timing circuitry. • Excellent transient protection. • Compact design. • Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25°C Voltage:(±10%): 12 VAC/VDC, 24VAC/VDC, 120 VAC/VDC. Off-Delay. Power Requirement: 4W, with rated load. Transient Protection: Non-repetitive transients of the following magni- Timing Specifications tudes will not cause spurious operation of affect function and accuracy. Timing Ranges: 0.5 to 10 / 3 to 60 sec.; 3 to 60 min. Operating Voltage <0.1 ms <1 ms Timing Adjustment: External resistor or potentiometer. An external 12, 24 VAC/VDC 860V* 208V* resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual 120 VAC/VDC 2,580V 2,150V* resistance needed to obtain the required time delay, * Min. source impedance of 100 ohms. use the following formula: Current Drain: Less than 5mA. T - T req min R = x 1,000,000 ohms t (T - T ) max min Environmental Data Accuracy: Repeat Accuracy: ±1% Overall Accuracy: ±2% at R = 1 megohm. Temperature Range: Storage: -40°C to +85°C. Reset Time: 50 ms, max. Operating: -40°C to +65°C. Output Switch Data Arrangement: Solid state 1 Form A (SPST-NO). Mechanical Data Rating: 1A, inductive, at nominal operating voltage. Expected Electrical Life: 10,000,000 operations at rated load. Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Weight: 4 oz. (112g) approximately. Initial Dielectric Strength Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions Ordering Information 1.25 VTM2 A CD 2.00 (31.8) (50.8) .885 || | (22.5) Series VTM2 Input Voltage Time Range Off-Delay A = 120VAC/VDC CD = 0.5 - 10 sec. 2.00 Timing Module E = 24VAC/VDC DD = 3 - 60 sec. (50.8) Q = 12VAC/VDC GD = 3 - 60 min. .250 (6.35) X .032 (.813) .170 DIA (4.32) ACCEPTS #8 SCREW QUICK CONNECTS Wiring Diagram START An external resistance of 1 megohm is POLARITY SHOWN SWITCH Authorized distributors are likely to stock the following: required to obtain the maximum time FOR DC for all ranges. To determine the actual MODELS None at present. resistance needed to obtain the 5 LOAD 1 7 6 required time delay, use the following R t formula: 2 4 INPUT VOLTAGE T - T req min 3 R = x 1,000,000 ohms t ( ) T - T max min Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1244 Refer to inside back cover. specified. Catalog 1308242 Issued 3-03 AGASTAT VTM3 series Interval Timing Module • Interval timing mode • Reliable solid state timing circuitry. • Excellent transient protection. • Compact design. • Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25°C Voltage:(±10%): 12 VAC/VDC, 24VAC/VDC, 120 VAC/VDC. Interval. Power Requirement: 4W, with rated load. Transient Protection: Non-repetitive transients of the following magni- Timing Specifications tudes will not cause spurious operation of affect function and accuracy. Timing Ranges: 0.5 to 10 / 3 to 60 sec.; 3 to 60 min. Operating Voltage <0.1 ms <1 ms Timing Adjustment: External resistor or potentiometer. An external 12, 24 VAC/VDC 860V* 208V* resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual 120 VAC/VDC 2,580V 2,150V* resistance needed to obtain the required time delay, * Min. source impedance of 100 ohms. use the following formula: Current Drain: Less than 5mA. T - T req min R = x 1,000,000 ohms t (T - T ) max min Environmental Data Accuracy: Repeat Accuracy: ±1% Temperature Range: Storage: -40°C to +85°C. Overall Accuracy: ±2% at R = 1 megohm. Operating: -40°C to +65°C. Reset Time: 50 ms, max. Output Switch Data Arrangement: Solid state 1 Form A (SPST-NO). Mechanical Data Rating: 1A, inductive, at nominal operating voltage. Mounting: Panel mount with one #8 screw. Expected Electrical Life: 100,000,000 operations at rated load. Termination: 0.250 in (6.35) quick connect terminals. Weight: 4 oz. (112g) approximately. Initial Dielectric Strength Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions Ordering Information 1.25 VTM3 A CD 2.00 (31.8) (50.8) .885 || | (22.5) Series VTM3 Input Voltage Time Range Interval A = 120VAC/VDC CD = 0.5 - 10 sec. 2.00 Timing Module E = 24VAC/VDC DD = 3 - 60 sec. (50.8) Q = 12VAC/VDC GD = 3 - 60 min. .250 (6.35) X .032 (.813) .170 DIA (4.32) ACCEPTS #8 SCREW QUICK CONNECTS Wiring Diagram An external resistance of 1 megohm is POLARITY SHOWN FOR DC Authorized distributors are likely to stock the following: required to obtain the maximum time MODELS for all ranges. To determine the actual None at present. 1 5 LOAD resistance needed to obtain the R required time delay, use the following t 2 4 formula: INPUT VOLTAGE 3 T - T req min R = x 1,000,000 ohms t ( ) T - T max min Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1245 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VTM4 series One Shot (Latching Interval) Timing Module • One shot (latching interval) timing mode • Reliable solid state timing circuitry. • Excellent transient protection. • Compact design. • Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25°C One Shot (Latching Interval). Voltage:(±10%): 12 VAC/VDC, 24VAC/VDC, 120 VAC/VDC. Power Requirement: 4W, with rated load. Timing Specifications Transient Protection: Non-repetitive transients of the following magni- tudes will not cause spurious operation of affect function and accuracy. Timing Ranges: 0.5 to 10 / 3 to 60 sec.; 0.5 to 10 / 3 to 60 min. Timing Adjustment: External resistor or potentiometer. An external Operating Voltage <0.1 ms <1 ms resistance of 1 megohm is required to obtain the 12, 24 VAC/VDC 860V* 208V* maximum time for all ranges. To determine the actual 120 VAC/VDC 2,580V 2,150V* resistance needed to obtain the required time delay, * Min. source impedance of 100 ohms. use the following formula: Current Drain: Less than 5mA. T - T req min R = x 1,000,000 ohms t (T - T ) max min Environmental Data Accuracy: Repeat Accuracy: ±1% Temperature Range: Storage: -40°C to +85°C. Overall Accuracy: ±2% at R = 1 megohm. Operating: -40°C to +65°C. Reset Time: 50 ms, max. Output Switch Data Mechanical Data Arrangement: Solid state 1 Form A (SPST-NO). Rating: 1A, inductive, at nominal operating voltage. Mounting: Panel mount with one #8 screw. Expected Electrical Life: 100,000,000 operations at rated load. Termination: 0.250 in (6.35) quick connect terminals. Weight: 4 oz. (112g) approximately. Initial Dielectric Strength Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions Ordering Information VTM4 A CD 1.25 2.00 (31.8) || | (50.8) .885 Series VTM4 Input Voltage Time Range (22.5) One Shot A = 120VAC/VDC CD = 0.5 - 10 sec. (Latching Interval) E = 24VAC/VDC DD = 3 - 60 sec. 2.00 Timing Module Q = 12VAC/VDC FD = 0.5 - 10 min. (50.8) GD = 3 - 60 min. .170 DIA (4.32) .250 (6.35) X .032 (.813) ACCEPTS #8 SCREW QUICK CONNECTS Wiring Diagram START An external resistance of 1 megohm is POLARITY SHOWN SWITCH Authorized distributors are likely to stock the following: required to obtain the maximum time FOR DC for all ranges. To determine the actual MODELS None at present. resistance needed to obtain the 5 LOAD 1 7 6 required time delay, use the following R t formula: 2 4 INPUT VOLTAGE T - T req min 3 R = x 1,000,000 ohms t ( ) T - T max min Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1246 Refer to inside back cover. specified. Catalog 1308242 Issued 3-03 AGASTAT VTM7 series Repeat Cycle Timing Module • Repeat cycle timing mode • Independently adjustable On and Off times. • Reliable solid state timing circuitry. • Excellent transient protection. • Compact design. • Flame retardant, solvent resistant housing. File E60363 File LR33434 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Timing Mode Input Data @ 25°C Voltage:(±10%): 12 VAC/VDC, 24VAC/VDC, 120 VAC/VDC. Repeat Cycle. Power Requirement: 4W, with rated load. Transient Protection: Non-repetitive transients of the following magni- Timing Specifications tudes will not cause spurious operation of affect function and accuracy. Timing Ranges: 0.5 to 10 / 3 to 60 sec.; 3 to 60 min. Operating Voltage <0.1 ms <1 ms Timing Adjustment: External resistor or potentiometer. An external 12, 24 VAC/VDC 860V* 208V* resistance of 1 megohm is required to obtain the maximum time for all ranges. To determine the actual 120 VAC/VDC 2,580V 2,150V* resistance needed to obtain the required time delay, * Min. source impedance of 100 ohms. use the following formula: Current Drain: Less than 5mA. T - T req min R = x 1,000,000 ohms t (T - T ) max min Environmental Data Accuracy: Repeat Accuracy: ±1% Temperature Range: Storage: -40°C to +85°C. Overall Accuracy: ±2% at R = 1 megohm. Operating: -40°C to +65°C. Reset Time: 500 ms. Output Switch Data Arrangement: Solid state 1 Form A (SPST-NO). Mechanical Data Rating: 1A, inductive, at nominal operating voltage. Expected Electrical Life: 100,000,000 operations at rated load. Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Weight: 4 oz. (112g) approximately. Initial Dielectric Strength Between Terminals and Mounting: 3,000VAC rms. Between Input and Output: 1,500VAC rms. Outline Dimensions Ordering Information 1.25 VTM7 A CD 2.00 (31.8) (50.8) .885 || | (22.5) Series VTM7 Input Voltage Time Range Repat Cycle A = 120VAC/VDC CD = 0.5 - 10 sec. 2.00 Timing Module E = 24VAC/VDC DD = 3 - 60 sec. (50.8) Q = 12VAC/VDC GD = 3 - 60 min. .170 DIA (4.32) .250 (6.35) X .032 (.813) ACCEPTS #8 SCREW QUICK CONNECTS Wiring Diagram R POLARITY SHOWN t An external resistance of 1 megohm is FOR DC OFF MODELS Authorized distributors are likely to stock the following: required to obtain the maximum time for all ranges. To determine the actual 5 LOAD 1 None at present. 7 6 resistance needed to obtain the R t required time delay, use the following 2 4 ON formula: INPUT VOLTAGE 3 T - T req min R = x 1,000,000 ohms t ( ) T - T max min Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1247 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT 7000 series Industrial Electropneumatic Timing Relay File E15631 File LR29186 Series 7000 Timing Relays are also manufactured to MIL-SPEC requirements, conforming to requirements of MIL-C-2212F (SHIPS) with the exception of MIL- S-901. Consult factory for ordering information. Note:7032 types and certain models with accessories are not agency approved. Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Design Features On-delay model 7012 (delay on pickup) • Available in on-delay, true off-delay, and on/off-delay. Applying continuous voltage to the coil • Timing from 0.1 seconds to 60 minutes, fully calibrated in linear increments. (L1-L2) starts a time delay lasting for • Oversize time-calibrated adjustment knobs, serrated with high-resolution the preset time. During this period the markings visible from all angles makes the timer easy to set timers. normally closed contacts (3-5 and 4-6) • Inherent transient immunity. remain closed. At the end of the delay • Standard voltages from 6-550VAC and 12-550VDC (special voltages available.) period the normally closed contacts • Available in 2-pole or 4-pole models. break and the normally open contacts • Numerous enclosure options: explosion proof, dust tight, watertight, (1-5 and 2-6) make. The contacts re- hermetically-sealed, NEMA 1. main in this transferred position until • Auxiliary timed and instantaneous switches can be added for greater switching the coil is deenergized, at which time flexibility. the switch instantaneously returns to • Many mounting options: Surface mount, Panel mount, Octal plug-in mounting. its original position. • Options: quick-connect terminals, dial stops, and transient protection module. De-energizing the coil, either during • Easy-to-reach screw terminals, all on the face of the unit, clearly identified. or after the delay period, will recycle • Modular assembly - timing head, coil assembly and switchblock are all the unit within 50 msec. individual modules, with switches field-replaceable. It will then provide a full delay period upon re-energization, regardless of Design & Construction how often the coil voltage is interrupt- ed before the unit has been permitted There are three main components of Series 7000 Timing Relays: to "time-out" to its full delay setting. Calibrated Timing Head uses no needle valve, recirculates air under controlled pressure through a variable orifice to provide linearly adjustable Off-delay model 7022 (delay on dropout) timing. Patented design provides instant recycling, easy adjustment and long service life under severe operating conditions. Applying voltage to the coil (for at Precision-Wound Potted Coil module supplies the initial motive force least 50 msec) will instantaneously with minimum current drain. Total sealing without external leads eliminates transfer the switch, breaking the nor- moisture problems, gives maximum insulation value. mally closed contacts (1-5 and 2-6), Snap-Action Switch Assembly - custom-designed over-center and making the normally open mechanism provides greater contact pressure up to transfer time for contacts (3-5 and 4-6). Contacts positive, no flutter action. Standard switches are DPDT arrangement, with remain in this transferred position as flexible beryllium copper blades and silver-cadmium oxide contacts. Special long as the coil is energized. The "timing-duty" design assures positive wiping action, sustained contact pres- time delay begins immediately upon sure and greater heat dissipation during long delay periods. de-energization. At the end of the de- Each of these subassemblies forms a self-contained module which is lay period the switch returns to its then assembled at the factory with the other two to afford a wide choice of normal position. operating types, coil voltages, and timing ranges. Re-energizing the coil during the The squared design with front terminals and rear mounting permits the delay period will immediately return grouping of Series 7000 units side-by-side in minimum panel space. the timing mechanism to a point Auxiliary switches may be added in the base of the unit, without affecting where it will provide a full delay the overall width or depth. period upon subsequent de- energization. The switch remains in Operation the transferred position. Two basic operating types are available. To increase the versatility of the basic timer models, auxiliary switches may “On-Delay” models provide a delay period on energization, at the end of be added to either on-delay or off-delay types. They switch additional circuits, which the switch transfers the load from one set of contacts to another. De- provide two-step timing action, or furnish electrical interlock for sustained coil energizing the unit during the delay period immediately recycles the unit, energization from a momentary impulse, depending on the type selected and readying it for another full delay period on re-energization. its adjustment. Because of their simple attachment and adjustment features, In "Off-Delay" models the switch transfers the load immediately upon they can be installed at the factory or in the field, by any competent mechanic. energization, and the delay period does not begin until the unit is de- All auxiliary switches are SPDT with UL listings of 10A @ 125, 250, or 480 energized. At the end of the delay period the switch returns to its original po- VAC. A maximum of one Code T or two Code L auxiliary switches may be sition. Re-energizing the unit during the delay period immediately resets the added to each relay. The L or LL switch is available with on-delay relays only. timing, readying it for another full delay period on de-energization. No power The T switch is available with both the on-delay and off-delay relays. is required during the timing period. Auxiliary Switch Options for On-Delay In addition to these basic operating types, "Double-Head" models offer Instant Transfer (Auxiliary Switch Code L, sequential delays on pull-in and drop-out in one unit. With the addition of maximum of 2 per relay.) auxiliary switches the basic models provide two-step timing, pulse actuation 1. Energizing coil begins time delay and transfers auxiliary switch. for interlock circuits, or added circuit capacity. 2. Main switch transfers after total preset delay. 3. De-energizing coil resets both switches instantly. Auxiliary switch is nonadjustable. NOTE: Seismic & radiation tested E7000 models are available. Two-Step Timing (Auxiliary Switch Code T, Consult factory for detailed information. maximum of 1 per relay.) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1248 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Auxiliary switch options To increase the versatility of the basic timer models, auxiliary switches may 4. De-energizing coil resets both switches instantly. First delay is be added to either on-delay or off-delay types. They switch additional circuits, independently adjustable, up to 30% of overall delay. provide two-step timing action, or furnish electrical interlock for sustained coil (Recommended maximum 100 seconds.) energization from a momentary impulse, depending on the type selected and Auxiliary Switch Options for Off-Delay its adjustment. Because of their simple attachment and adjustment features, In these models the same auxiliary switch provides either two-step timing or they can be installed at the factory or in the field, by any competent mechanic. instant transfer action, depending on the adjustment of the actuator. All auxiliary switches are SPDT with UL listings of 10A @ 125, 250, or 480 VAC. Two-Step Timing (Auxiliary Switch Code T, maximum of 1 per relay.) A maximum of one Code T or two Code L auxiliary switches may be added to 1. Energizing coil transfers main and auxiliary switches instantly. each relay. The L or LL switch is available with on-delay relays only. The T 2. De-energizing coil begins time delay. switch is available with both the on-delay and off-delay relays. 3. After first delay auxiliary switch transfers. Auxiliary Switch Options for On-Delay 4. Main switch transfers after total preset delay. First delay is independently Instant Transfer (Auxiliary Switch Code L, maximum of 2 per relay.) adjustable, up to 30% of overall delay. (Recommended maximum 100 sec- 1. Energizing coil begins time delay and transfers auxiliary switch. onds.) 2. Main switch transfers after total preset delay. Instant Transfer (Auxiliary Switch Code L, maximum of 1 per relay.) 3. De-energizing coil resets both switches instantly. 1. Energizing coil transfers main and auxiliary switches instantly. Auxiliary switch is nonadjustable. 2. De-energizing coil resets auxiliary switch and begins time delay. Two-Step Timing (Auxiliary Switch Code T, maximum of 1 per relay.) 3. Main switch transfers after total preset delay. 1. Energizing coil begins time delay. Auxiliary switch is factory adjusted to give instant transfer operation, but may 2. After first delay auxiliary switch transfers. be easily adjusted in the field to provide two-step timing. 3. Main switch transfers after total preset delay. On-delay, off-delay model 7032 (double head) The Double Head model provides delayed switch transfer on energization of its coil, followed by delayed resetting upon coil de- energization. Each delay period is independently adjustable. In new circuit designs or the improvement of existing controls now using two or more conventional timers, the Double Head unit offers distinct advantages. Its compact design saves precious panel space, while the simplified wiring reduces costly interconnection. On-delay, off-delay model 7032 (double head) With the addition of an extra switch block at the bottom of the basic unit, this version of the Series 7000 offers four pole switch capacity with simul- taneous timing or two-step timing. The two-step operation is achieved by factory adjustment to your specifications. For two-step operation, a maximum timing ratio between upper and lower switches of 3:2 is recommended. Once adjusted at the factory, this ratio remains constant regardless of changes in dial settings. (Ex: If upper switch transfer is set on dial at 60 sec., minimum time on lower switch should be 40 sec.) This Series 7000 unit offers many of the performance features found in basic models - voltage ranges, timing and switch capacities are virtually iden- tical. Four pole models add approximately 1-1/4" to the maximum height of the basic model, approximately 1/8" to the depth. They are designed for vertical operation only. Surge/transient protection option Features The Surge/Transient Protection Option protects electronic control circuits from • Protect electronic control circuits transients and surges which are generated when the timer coil is activated. from voltage transients generated Built with a minimum of moving parts, the unit provides a fast response to rap- by the timer coil. idly rising voltage transients. The accurate, precision-made device is not polari- • Fast response to the rapidly rising ty sensitive and permits the user to initiate, delay, sequence and program back E.M.F. equipment actions over a wide range of applications under the most severe • High performance clamping voltage operating conditions. characteristics. It consists of a specially modified coil case, varistor, varistor cover, terminal • UL recognized, (except varistor and extensions and cup washers so that normal terminations can be used. The coil together). varistor will not affect the operating characteristics of the 7000 Timer. The • Timer NOT polarity sensitive. varistor has bilateral and symmetrical voltage and current characteristics and therefore can be used in place of the back-to-back zener diodes. This charac- teristic also means that the coil will not be polarity sensitive. Transient Suppressor Option "V" Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1249 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Timing Specifications (All values shown are at nominal voltage and 25°C unless otherwise specified). Operating Modes: Minimum operating voltages are based on vertically mounted 7012 units. Model 7012/7014: On-delay (delay on pick-up). 7012 horizontally mounted or 7022 vertically or horizontally mounted units Model 7022/7024: Off-delay (delay on drop-out). will operate satisfactorily at minimum voltages approximately 5% lower than Model 7032: On-delay, off-delay (double head). those listed. Timing Adjustment: Timing is set by simply turning the calibrated dial to AC units drop out at approximately 50% of rated voltage. DC units drop out the desired time value. In the zone of approximately 25° separating the at approximately 10% of rated voltage. high and low end of timing ranges A,D,E, and K, instantaneous operation All units may be operated on intermittent duty cycles at voltages 10% above (no time delay) will occur. All other ranges produce an infinite time delay the listed maximums (intermittent duty - maximum 50% duty cycle and 30 when the dial is set in this zone. minutes "on" time.) Models 7014 and 7032 are available with letter-calibrated dials only. The upper end of the time ranges in these models may be twice the values Surge/Transient Protection Option Characteristics (DC Timers Only) shown. Coil Voltage Max Excess Max De-energization Linear Timing Ranges: Models 7012, Models 7014, Nominal (DC) Energy Capacity (Joule) Transient Voltage Code 7022, 7024 7032 A .1 to 1 Sec. .2 to 2 Sec. 12 V 0.4 J 48 V B .5 to 5 Sec. .7 to 7 Sec. 24 V 1.8 J 93 V C 1.5 to 15 Sec 2 to 20 Sec. 28 V 1.8 J 93 V D 5 to 50 Sec. 10 to 100 Sec. 32 V 2.5 J 135 V E 20 to 200 Sec. 30 to 300 Sec. 48 V 3.57 J 145 V F 1 to 10 Min. 1.5 to 15 Min. 60 V 6 J 250 V H 3 to 30 Min. 3 to 30 Min. 96 V 10 J 340 V I 6 to 60 Min. Not Avail. 110 V 10 J 340 V J 3 to 120 Cyc. Not Avail. 125 V 10 J 340 V K 1 to 300 Sec. Not Avail. 220 V 17 J 366 V 250 V 17 J 366 V Repeat Accuracy: For delays of 200 seconds or less: 7012*, 7022, 7024: +5% Surge Life 7014*: +10% Applied 100,000 times continuously with the interval of 10 seconds at room 7032: +15% temperature. Below 68 VAC: 12A; Above 68 VAC: 35A For delays greater than 200 seconds: 7012*, 7022, 7014*, 7024: +10% Temperature Range 7032: +15% Operating: -22°F to +167°F (-30°C to + 75°C) * The first time delay afforded by Model 7012 with H (3 to 30 min.) and I (6 Storage: -40°F to +167°F (-40°C to +75°C) to 60 min.) time ranges or Model 7014 with H time range will be approx. 15% longer than subsequent delays due to coil temperature rise. Output/Life Contact Ratings: Contact Capacity in Amps (Resistive Load) Reset Time: 50 msec. (except model 7032) Contact Min. 100,000 Min. 1,000,000 Relay Release Time: 50 msec. for on-delay models (7012/7014) Voltage Operations Operations Relay Operate Time: 50 msec. for off-delay models (7022/7024) 30 VDC 15.0 7.0 110 VDC 1.0 0.5 120 V 60Hz 20.0 15.0 Operating Voltage Coil Data (for DPDT) 240 V 60Hz 20.0 15.0 480 V 60Hz 12.0 10.0 Operating* Operating 10 Amps Resistive, 240 VAC Coil Code Rated Voltage Rated Voltage 1/4 Horsepower, 120 VAC/240VAC (per pole) Part # Letter Voltage Range Voltage Range 15 Amps 30 VDC (per pole) @ 60Hz @50Hz 5 Amps, General Purpose, 600VAC (per pole) 7000 A 120 102-132 110 93.5-121 Dielectric: Withstands 1500 volts RMS 60Hz between terminals and B 240 204-264 220 187-242 ground. 1,000 volts RMS 60 Hz between non-connected terminals. For C 480 408-528 dielectric specification on hermetically sealed models consult factory. D 550 468-605 Insulation Resistance: 500 Megohms with 500VDC applied. E 24 20.5-26.5 Temperature Range: Operating: -20°F to +165°F (-29°C to 74°C) AC F 127 108-140 Storage: -67°F to +165°F (-55°C to 74°C) G 240 204-264 Temperature Variation: Using a fixed time delay which was set and H 12 10.2-13.2 measured when the ambient temperature was 77°F (25°C), the maximum I 6 5.1-6.6 observed shift in the average of three consecutive time delays was -20% at J 208 178-229 -20°F (-29°C) and +20% at 165°F (74°C). K Dual Voltage Coil Mounting/Terminals: Normal mounting of the basic unit is in a vertical (Combines A&B) position, from the back of the panel. A front mounting bracket is also L Special AC Coils supplied with each basic unit, for installation from the front of the panel. (L1, L2, etc.) All units are calibrated for vertical operation. Basic models (7012, 7022) 7010 M 28 22.4-30.8 may also be horizontally mounted, and will be adjusted accordingly when N 48 38.4-52.8 Accessory Y1 is specified in your order. O 24 19.2-26.4 Standard screw terminals (8-32 truss head screws supplied) are located P 125 100-137.5 on the front of the unit, with permanent schematic markings. Barrier Q 12 9.6-13.2 isolation is designed to accommodate spade or ring tongue terminals, with R 60 48-66 spacing to meet all industrial control specifications. DC S 250 200-275 The basic Series 7000 may also be panel mounted with the addition of a T 550 440-605 panelmount kit that includes all necessary hardware and faceplate. This U 16 12.8-17.6 offers the convenience of "out-front" adjustment, with large calibrated dial V 32 25.8-35.2 skirt knob. The faceplate and knob blend with advanced equipment and W 96 76.8-105.6 console designs, while the body of the unit and its wiring are protected Y 6 4.8-6.6 behind the panel. Z 220 176-242 Other mounting options include plug-in styles and special configurations X Special DC Coils to meet unusual installation requirements. Contact factory for details. (X1, X2, etc.) Power Consumption: Approximately 8 watts power at rated voltage . Approximate Weights: *Four pole Models: Operational voltage range 90% to 110% for AC units; Models 7012, 7022 . . . . . . . 2 lbs. 4 ozs. 85% to 110% for DC units. 7014, 7024 . . . . . . . 2 lbs. 10 ozs. 7032 . . . . . . . . . . . . 3 lbs. 5 ozs. Weight may vary slightly with coil voltage. See next column for more coil data. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1250 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Outline Dimensions (Dimensions in inches). Model 7032 Models 7012, 7022 Models 7014, 7024 Panel mount Option "X" Surge/Transient Protection Option Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1251 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Ordering Information Typical Part No. ➤ 70 1 2 A D GZ 1. Basic Series: 70 = 7000 series electropneumatic timing relay 2. Operation: 1 = On-delay 3 = On-delay, off-delay (double head) 2 = Off-delay 3. Contact Arrangement: 2 = 2PDT (2 form C) **4 = 4PDT (4 form C) 4. Coil Voltage: AC Coils DC Coils A = 120VAC, 60 Hz.; 110VAC, 50Hz. M = 28VDC B = 240VAC, 60 Hz.; 220VAC, 50Hz. N = 48VDC C = 480VAC, 60 Hz. O = 24VDC D = 550VAC, 60 Hz. P = 125VDC E = 24VAC, 60 Hz. Q = 12VDC F = 127VAC, 50 Hz. R = 60VDC G = 240VAC, 50Hz. S = 250VDC H = 12VAC, 60 Hz. T = 550VDC K = Dual voltage (combines A & B) U = 16VDC L = Special AC coils (L1, L2, etc.) V = 32VDC W = 96VDC Y = 6VDC Z = 220VDC X = Special DC coils (X1, X2, etc.) 5. Timing Range: Models 7012, 7022 & 7024 †Models 7014 & 7032 A = .15 to 3 sec. For model 7032 specify separate time B = .5 to 5 sec. range code for each head. Example: AB. C = 1.5 to 15 sec. Any two ranges may be selected. D = 5 to 50 sec. A = .2 to 2 sec. E = 20 to 200 sec. B = .7 to 7 sec. F = 1 to 10 min. C = 2 to 20 sec. H = 3 to 30 min. D = 10 to 100 sec. I = 6 to 60 min. E = 30 to 300 sec. J = 3 to 120 cyc. F = 1.5 to 15 min. K = 1 to 300 sec. H = 3 to 30 min. 6. Options: A1 = Single quick-connect terminals (note 4). K = Explosion-proof Enclosure (note 1). A2 = Double quick-connect terminals (note 4). L = Auxiliary Switch, instant transfer. 7012 only (notes 2 & 6). B = Plug-in connectors (note 4). LL = Two Aux. Switches, instant transfer. On Model 7014 Factory Installed Only. (notes 2 & 6) GZ = Enclosure with bottom knockouts (note 1). M = Dust-tight Gasketing (notes 4 & 5). H2 = Hermetically sealed enclosure, 8 pin solder (notes 1 & 4). P = Octal Plug Adapter. Can be combined only with options l1,l2. M, S, X, or Y1. (note 4). H3 = Hermetically sealed enclosure, 8 pin octal (notes 1 & 4). S = Dial Stops. H4 = Hermetically sealed enclosure, 8 screw terminal block (notes 1 & 4). T = Auxiliary Switch, two-step timing (notes 2 & 6). *H6 = Hermetically sealed enclosure, 11 pin solder (notes 1 & 4). V = Transient/Surge Protection (for DC coil voltage only). *H7 = Hermetically sealed enclosure, 11 pin octal (notes 1 & 4). W = Watertight Enclosure (note 1). *H8 = Hermetically sealed enclosure, 11 screw terminal block (notes 1 & 4). X = Panelmount includes hardware and adjustment for horizontal operation (note 4) l1 = Tamper-proof Cap, opaque black (Cannot be combined with Option X). Y1 = Horizontal calibration, for horizontal operation without panelmounting (note 4). l2 = Tamper-proof Cap, transparent (Cannot be combined with Option X). Y2 = Horizontal calibration, with Compensating Spring for vertical operation (note 4). Notes: 1. Cannot be combined with B, P or X Options 2. Cannot be combined with B, P or Y2 Options 3. Cannot be combined with GZ, H, l1, l2, K, W or Y1 Options 4. Not Avail. on 4-Pole Models 5. Not Available with L, T or LL options. 6. Not Available on hermetically sealed units. * Sized to accommodate one L or T Auxiliary Switch ** Not available on On-Delay, Off-Delay (Double Head) model. † Available with letter calibrated dials only. Upper end of time range may be twice the value shown †† 120 cycles = 2 sec. Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.. 7012AA 7012BC 7012PKX 7022AI 7012AB 7012NC 7012PJX 7022AJ 7012AC 7012PA 7022AA 7022AKT 7012AD 7012PB 7022AB 7022BC 7012AE 7012PC 7022AC 7022BK 7012AF 7012PD 7022AD 7022PA 7012AH 7012PF 7022AE 7022PB 7012AK 7012PJ 7022AF 7022PC 7012ACL 7012PK 7022AH 7022PK Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1252 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Ordering options – can only be orderd as factory installed options (Dimensions, where shown, are in inches.) A1 – Single Quick-Connect Terminals A2 – Double Quick-Connect Terminals B – Plug-In Connectors Use with Accessory “C” or “D” below. GZ – Total Enclosure H – Hermetically Sealed Enclosure I – Tamper-Proof Cover With knockouts for bottom connection. 3.16" W x 3.84" D x 7.63"H K – Explosion proof Enclosure L – Auxiliary Switch LL – Auxiliary Switch (Meets requirements for Class I, Groups C&D locations). 7.50"W x 6.00" D x 10.38" H M – Dustight P – Octal Plug Adapter S – Dial Stops Gasket Gasket T – Auxiliary Switch V – Transient/Surge Protection W – Watertight Enclosure (NEMA-4) 4.75" W x 4.44" D x 9.75" H Transient Protection X – Panelmount Kit Mounting hardware included. Accessories (Not available for 7032 models) Plug-In Receptacle (Accessory C) Plug-In Receptacle (Accessory D) Screw Terminals Catalog Quick Connect No. 700137. For use with Terminals "B" Option Catalog No. 700141. For use with "B" Option. Ordering options can only be ordered as factory installed options. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1253 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT 2100 series Miniature Electropneumatic Timing Relay Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Repeat Accuracy: NORMAL VERTICAL POSITION Design Features +5% at 25°C; +7% at 85°C; +8% at -55°C. • High Repeat Accuracy over voltage and temperature extremes The average time between -55°C and 85°C will be within +20% of the • Hermetically sealed units are designed for high shock and vibration average @ 25°C with a proportionally reduced effect at lesser extremes. applications In extremely short delay settings an additional 8 msec. variation may result • Instant recycling – easy linear adjustment on AC models due to "half cycle" alternating current effect. • Exclusive Dial Head adjustment – no needle valves Setting Tolerance: Factory time setting, when specified, subject to addition- • Delay ranges from milliseconds to 3 minutes al +5% tolerance. • DPDT contacts Position Sensitivity: HORIZONTAL POSITION: Approximately 5% increase from the initial time in Design & Construction the vertical position. INVERTED POSITION: Approximately 10% increase from the initial time in Sealed patented timing head circulates air under controlled pressure the vertical position. through a variable orifice to provide adjustable timing. Circular-path Dial Reset Time: 2112 Series: 25 msec.; 2122 Series: 75 msec. Head principle replaces traditional needle valve. Relay Release Time: 25 msec. (2112 Series) Snap-action switch assembly provides sustained contact pressure during Relay Operate Time: 75 msec. (2122 Series) timing cycles. Specially designed over center mechanism assures flutter- free load transfer after extended delay periods. Operating Voltage: Coil Data Precision-wound solenoid assembly supplies the basic motive force Nominal Resistance Nominal Resistance when the control circuit is closed. Operating Ohms Operating Ohms These assemblies are mounted in a rigid self-supporting framework within Code Voltage ±10% Code Voltage ±10% a steel enclosure. This rugged construction assures permanent alignment of all operating members, the key to this unit's long trouble-free operation. M 12VDC 30 S 120V 60 Hz 190 (2112 Series) N 28VDC 131 S 120V 60Hz 285 (2122 Series) P 48VDC 500 T 240V 60Hz 765 Operation R 110VDC 3200 U 115V 400Hz 2600 Series 2112 (On-Delay) - Applying rated voltage to the Y 125VDC 3380 solenoid coil starts the preset time delay. At the end of the Transients: Insensitive to transients of +1500 VAC for 10 milliseconds delay period the NC contacts break and the NO contacts Dielectric: 1000V RMS @ 60Hz between non-connected terminals. make. Contacts remain in this position until the coil is de- energized, when the switch instantaneously returns to its Contact Rating (DPDT Contacts): original position. De-energizing the coil, either during or 30V 110V 120V 120V 240V after the delay period, will immediately (within 25 msec.) re- DC DC 60Hz 400Hz 60Hz cycle the unit. It will then provide another full delay period on re-energization. Inductive (Amps) 2 .75 3 2 1.5 Series 2122 (Off-Delay) - Applying rated voltage to the coil for at least 75 msec. (for accurate timing) will instanta- Resistive (Amps) 10 1 10 10 5 neously transfer the switch, breaking the NC contacts and Based on 100,000 operations electrical, 1,000,000 mechanical. Inductive and making the NO contacts. Contacts remain in this position capacitive load should not have inrush currents that exceed five times normal as long as the coil is energized. The preset time delay operating load. period begins as soon as the coil is de-energized, at the Ambient Temperature Range: -55°C to +85°C end of which the switch returns to its original position. Weight: Maximum, any unit - 17 ozs. No power is required during the timing period. Re- Mounting/Terminals: Chassis mounting tabs, octal plugs and external (-4) energizing the coil, either during or after the delay period, or internal (-5) adjustment. Panel mounting back plate, internal adjustment, will immediately start a new cycle with full delay period. and solder hook terminals (-9). Operation (Listed values at nom. voltage, 25°C unless noted). Operating Mode: 2112: On-delay (delay on pull-in); 2122: Off-delay (delay on drop-out) Timing Adjustment: All standard models offer easy linear adjustment over one of nine timing ranges listed below. For applications requiring frequent readjustment, the external knob model with calibrated dial is recommended. For tamper-proof installation or where readjustment is infrequent, the internal key model may be preferred. This model requires removal of the cover plate for timing adjustment. Hermetically sealed models provide a slotted adjusting screw under the cap nut on the top cover. Timing Ranges: --4 --5 --9 Code Range Code Range These are minimum standards; where more severe environmental A .03 to .1 sec. G 2.0 to 60.0 sec. conditions must be met, please consult the factory. B .1 to .3 sec. H 5.0 to 120.0 sec. C .15 to 1.0 sec. J 5.0 to 180.0 sec. D .375 to 3.0 sec. K 1.5 to 30.0 cycles E .75 to 10.0 sec. L 3.0 to 120.0 cycles F 1.0 to 30.0 sec. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1254 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Outline Dimensions for Industrial Models (Dimensions in inches. Multiply by 25.4 to obtain millimeters.) Ordering Information for Industrial Models Typical Part No. ➤ 21 1 2 D 4 N B 1. Basic Series: 21 = 2100 Miniature electropneumatic timing relay 2. Operation: 1 = On-delay 2 = Off-delay 3. Contact Arrangement: 2 = DPDT (2 form C) 4. Operating Voltage: A = AC D = DC 5. Physical Characteristics: Code Enclosure Adjustment Connector Mounting 4 = Unsealed External Knob Octal Plug Chassis Mount 5 = Unsealed Internal Key Octal Plug Chassis Mount 9 = Unsealed Internal Key Solder Hook Panel Mount Plate 6. Coil Voltage: M = 12VDC N = 28VDC P = 48VDC R = 110VDC Y = 125VDC S = 120VAC, 50/60 Hz. T = 240VAC, 60 Hz. 7. Timing Range: A = .03 to .1 sec. C = .15 to 1.0 sec. E = .75 to 10.0 sec. H = 5.0 to 120.0 sec. K = 1.5 to 30.0 cycles B = .1 to .3 sec. D = .375 to 3.0 sec. F = 1.0 to 30.0 sec. J = 5.0 to 180.0 sec. L = 3.0 to 120.0 cycles Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.. None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1255 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Specifications for MIL-Spec and Hermetically Sealed Models Dielectric: In accordance with specification MIL-R- 6106E (ASG). Also withstands 1,000 Volts RMS at 60 Hz between non-connected terminals. Agastat timing relays Other: Agastat Miniature Timing Relays also perform to conform to applicable Mil-Spec. requirements military covering: specifications Moisture Ozone in Patriot Humidity Sunshine missiles. Sand/Dust Acoustic Noise Salt Spray Prolonged Storage Outline Dimensions for MIL-Spec and Hermetically Sealed Models (In inches. Multiply by 25.4 for millimeters). 8 pin solder 8 pin solder hook or MS/AN hook or MS/AN Connector Connector Panel Mount Panel Mount —H1, —H3 —9 Octal Plug (with internal Octal Plug (with internal adjustment or external adjustment or external adjustment knob adjustment knob Chassis Mount Chassis Mount —H2 —4, —5 Ordering Information for MIL-Spec and Hermetically Sealed Models Typical Part No. ➤ 21 1 2 D H1 N B 1. Basic Series: 21 = 2100 Miniature electropneumatic timing relay 2. Operation: 1 = On-delay 2 = Off-delay 3. Contact Arrangement: 2 = DPDT (2 form C) 4. Operating Voltage: A = AC D = DC 5. Physical Characteristics: Code Enclosure Adjustment Connector Mounting H1 = Hermetically Sealed External Screw Solder Hook Panel Mount Plate H2 = Hermetically Sealed External Screw Octal Plug Chassis Mount H3 = Hermetically Sealed External Screw “AN” Connector Panel Mount Plate 4 = Unsealed External Knob Octal Plug Chassis Mount 5 = Unsealed Internal Key Octal Plug Chassis Mount 9 = Unsealed Internal Key Solder Hook Panel Mount Plate 6. Coil Voltage: M = 12VDC N = 28VDC P = 48VDC R = 110VDC Y = 125VDC S = 120VAC, 50/60 Hz. T = 240VAC, 60 Hz. U = 115VAC, 400 Hz. 7. Timing Range: A = .03 to .1 sec. C = .15 to 1.0 sec. E = .75 to 10.0 sec. H = 5.0 to 120.0 sec. K = 1.5 to 30.0 cycles B = .1 to .3 sec. D = .375 to 3.0 sec. F = 1.0 to 30.0 sec. J = 5.0 to 180.0 sec. L = 3.0 to 120.0 cycles Our authorized distributors are more likely to maintain the following items in stock for immediate delivery.. None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1256 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 SENSORS, MONITORS & PROTECTIVE RELAYS Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 CS......................... Voltage Sensor .................................... 1302 PMA/PMB ............ Three Phase Power Quality Monitor ... 1305 SDAS-01 ............... Current Monitor .................................. 1307 VCA ...................... Single Phase Undervoltage Relay ....... 1303 Transformers.............................. 201-212 2 VMA ..................... Single Phase Undervoltage Relay ....... 1304 WD25 ................... Paralleling (Synch Check) Relay .......... 1308 WD2759 ............... Over/Undervoltage Relay .................... 1308 Low-signal PC Board Relays. 301-336 3 WD32 ................... Reverse Power Relay.......................... 1308 WD47 ................... Phase Sequence Relay ....................... 1308 WD5051 ............... 1 or 3-Phase Overcurrent Relay .......... 1308 Mid-Range PC Board Relays ....... 19-21 WD81OU.............. Over/Underfrequency Relay................ 1308 4 Steel-Cased Protective Relays Power PC Board Relays ................ 22-35 5 NOTE: KILOVAC protective relays were previously sold under Our KILOVAC steel-cased protective relays (listed below) are the WILMAR brand name. not described in this technical databook, as they do not represent the most cost effective solution for many new design requirements. Most customers find our plastic-cased Relays with KILOVAC WD... series products are more appropriate for many 6 Forcibly-Guided Contacts.............. 36-79 new industrial applications. However,we still offer our steel- cased protective relays. For details on KILOVAC steel-cased protective relays consult your Tyco Electronics sales engineer Plug-in/Panel Mount or visit our website at www.tycoelectronics.com. 7 General Purpose Relays............701-749 1000 ................................... Loss of Phase, Undervoltage Relay 1800 ........................................................ Paralleling (volt) Relay Power Relays & Definite 20-000 ............................................. Frequency, 56-66 Hz Relay 8 Purpose Contactors...................... 89-131 20-050-19 ........................................... Voltage/Frequency Relay 25-000 ........................................... Over/Underfrequency Relay Latching, Impulse & 250 ..................................................... Over/Undervoltage Relay 9 Rotary Relays ...............................149-154 700 ......................................................................... 1 & 3 Phase 700 .......................... 1 & 3 Phase, Adjustable Time Delay Relay 900 ........................................................ Phase Sequence Relay Automotive Relays ......................141-148 10 D100X .................................... Close Differential, 1 Phase Relay D101X .................................. Series Close Differential, 3 Phase WC1 & WCT1............. Overcurrent, Time Delay, 1 Phase Relay Solid State Relays & WC1G........................... Power Factor & Ground Fault Detector 11 Input/Output Modules ................195-207 WC3 & WCT3............. Overcurrent, Time Delay, 3 Phase Relay WCB ....................................................... Current Balance Relay Time Delay Relays & WCD.................................................. Current Differential Relay 12 Modules ....................................1201-1256 WGD ............................ Power Factor & Ground Fault Detector WOF & WUF .............. Overfrequency & Underfrequency Relay WOUF ............ Over/Underfrequency, Time Delay Option Relay Sensors, Monitors & WOUV .................................... DC Over/Undervoltage DC Relay 13 Protective Relays .................... 1301-1314 WOUVT .......................... Over/Undervoltage, Time Delay Relay WUV/WOV .................................... Under- & Overvoltage Relay WUV/WOV ........................ DC Under- & Overvoltage DC Relay High Performance Relays 14 WUVT/WOVT ..... Under- & Overvoltage with Time Delay Relay and Contactors (overview) ....... 233-234 WSYN........................... Voltage Frequency, Phase Angle Relay Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1301 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B CS series Solid State Hybrid Voltage Sensor • Close differential • Choice of two types – Fixed pick-up and knob adjustable drop-out – Knob adjustable pick-up and drop-out • Internal 2 Form C (DPDT) output relay File E22575 Fixed Pick-up and Adjustable Pick-up File LR15734 Adjustable Drop-out and Drop-out Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Engineering Data Sensing Modes Power Requirement: Typically less than 3VA or 3W. The CS can be used as an over or undervoltage sensor, depending upon Duty Cycle: Continuous. whether the load is connected to the normally closed (NC) or normally open Repeatability: ±1%, max. (NO) contacts of the sensor’s output relay. Response Time: 10-25 ms, typ. Internal Relay Contact Arrangement: 2 Form C (DPDT). Overvoltage sensor – The NC contacts are used. The relay remains de- Internal Relay Contact Rating: 10A @ 28VDC , res., or 120VAC, 80% p.f. energized until an overvoltage is sensed. Reverse Polarity Protection: On DC types. Temperature Range: -10°C to +55°C. Undervoltage sensor – The NO contacts are used. The relay remains en- Temperature Coefficient: 0.2%/°C, max. ergized until the voltage decreases to the preset level, where the sensor Enclosure: Plastic dust cover. de-energizes the relay. Mounting: 8-pin octal style plug. Fits either 27E122 or 27E891 (snap-on) screw terminal sockets. Weight: 8 oz. (227g) approximately. Adjustable Voltage Sensor Operation Ordering Information – Distributors are more likely to stock boldface items. Note 1 – As voltage increases, the RELAY Fixed Pick-Up and Adjustable Drop-Out relay will pick-up at its selected ENERGIZED point and remain energized while Part Number Pick-Up Drop-Out Range Maximum voltage is maintained at that level or (Volts) (Volts) Voltage higher. CSJ-38-71010 105 90-103 140VAC (50/60 Hz.) CSL-38-31010 22 16-21 32VDC Note 2 – As voltage decreases, af- HYSTERISIS ter pick-up, the relay will drop-out at Adjustable Pick-Up and Adjustable Drop-Out 2 VOLTS its selected point. Part Number Pick-Up Range Drop-Out Range* Maximum (Volts) (Volts) Voltage Note 3 – Minimum hysterisis, the RELAY CSJ-38-70010 92-140 90-138 150VAC (50/60 Hz.) voltage differential between pick-up DE-ENERGIZED CSL-38-30010 20-30 18-28 32VDC and drop-out, is typically 2% of CSL-38-40010 40-58 38-56 60VDC pick-up. CSL-38-60010 92-140 90-138 150VDC * Actual maximum drop-out voltage is the selected pick-up voltage less the hysterisis voltage. NOTE 1 NOTE 2 Outline Dimensions Wiring Diagrams – Bottom Views (pins numbered clockwise from keyway) 1.781 MAX. .600 MAX. (42.24) (15.24) .875 2.937 MAX. .560 (22.23) (76.60) (14.22) - 1.187 + AC DC (30.15) INPUT INPUT Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1302 specified. Refer to inside back cover. VOLTAGE 2.406 MAX. (61.11) Catalog 1308242 Issued 3-03 AGASTAT VCA series Single Phase Undervoltage Relay • Automatic reset minimizes equipment downtime. • Fixed pickup point prevents low voltage start-up. • Adjustable dropout point protects against undervoltage operation. • Delayed dropout prevents nuisance tripping. • Compact, inexpensive design saves space, reduces cost. • Solid state circuitry for enhanced accuracy and long life. • LED indicates normal voltage condition. File E60363 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Input Data Function Single phase undervoltage relay. Voltage: 120VAC, 240VAC. Power Requirement: 4W, max. Transient Protection: 120VAC ............... 30 joules 240VDC ............... 30 joules Sensing Specifications 120VAC ............... 10 joules Voltage Set-Point Adjustment: Internal potentiometer (screwdriver 120VDC ............... 10 joules adjustable) with linear calibrated dial. Response Time: Depending on severity of undervoltage: 0.1 - 1 sec. Accuracy: Repeat Accuracy: ±0.2% Overall Accuracy: ±1%. Environmental Data Temperature Range: Storage: -40°C to +85°C. Output Data Operating: -23°C to +55°C. Arrangement: 1 Form C (SPDT). Rating: 7A @ 250VAC; 1/6 HP @ 250VAC; 300VA @ 120/240VAC; 3A @ 30VDC. Expected Mechcanical Life: 10,000,000 operations. Expected Electrical Life: 100,000 operations at rated resistive load. Mechanical Data Mounting: Panel mount with one #8 screw. Termination: 0.250 in (6.35) quick connect terminals. Initial Dielectric Strength Status Indication: LED indicates normal voltage condition. Weight: 3.2 oz. (90.7g) approximately. Between Terminals and Case: 1,480V. Between Relay Contacts and Active Circuitry: 1,480V. Outline Dimensions and Wiring Diagram Ordering Information Part Number Operating Voltage 2.00 VCAA 120VAC (50.8) .763 OUTPUT RELAY VCAB 240VAC (19.4) .278 (7.06) OUTPUT RELAY .286 (7.26) UNDER 2.00 VOLTAGE (50.8) ADJUST INPUT VOLTAGE .885 .170 DIA Authorized distributors are likely to stock the following: (22.5) (4.32) .250 (6.35) X .032 (.813) None at present. ACCEPTS 1.25 QUICK CONNECTS #8 SCREW (31.8) Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1303 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT VMA series Single Phase, Plug-in Undervoltage Relay • Automatic reset minimizes equipment downtime. • Fixed pickup point prevents low voltage start-up. • Adjustable dropout point protects against undervoltage operation. • Locking potentiometer maintains selected set point. • Delayed dropout prevents nuisance tripping. • Plug-in mounting for easier installation. • Built-in protection against polarity reversal. • LED indicates normal voltage condition. File E60363 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Input Data Function Single phase undervoltage relay. Voltage: See ordering information. Power Requirement: 4W, max. Transient Protection: 24VAC ................. 1.5 joules 24VDC ................. 1.5 joules Sensing Specifications 48VDC ................. 10 joules Voltage Set-Point Adjustment: Locking potentiometer with calibrated dial. 120VAC ............... 10 joules Response Time: Standard 0.5 sec. delay on dropout. 125VDC ............... 10 joules Accuracy: Repeat Accuracy: ±0.5% under fixed conditions. 240VDC ............... 20 joules Overall Accuracy: ±1%. Reverse Polarity Protection: On DC models. Temperature Coefficient: ±0.02%/°C (Max.). Duty Cycle: Continuous. Environmental Data Output Data Temperature Range: Storage: -30°C to +60°C. Arrangement: 2 Form C (DPDT). Operating: -10°C to +55°C. Rating: 7A @ 250VAC; 1/6 HP @ 250VAC; 300VA @ 120/240VAC; 3A @ 30VDC. Expected Mechcanical Life: 10,000,000 operations. Expected Electrical Life: 100,000 operations at rated resistive load. Mechanical Data Mounting: Octal plug. Fits 27E122 or 27E891 (snap-on) screw terminal socket. Order socket separately. Initial Dielectric Strength Enclosure: Nylon cover protects against particles. Status Indication: LED indicates normal voltage condition. Between Terminals and Case: 1,480V. Weight: 6 oz. (168g) approximately. Between Relay Contacts and Active Circuitry: 1,480V. Outline Dimensions Ordering Information Part Number Nominal Voltage Pick-Up (V) Drop-Out Range (V) VMAXEA 24VAC 21 15 to 20 VMAXAA 120VAC 104 78 to 99 VMAXBA 240VAC 209 156 to 199 VMAXOA 24VDC 21 15 to 20 VMAXEA 48VDC 42 31 to 40 VMAXEA 125VDC 109 81 to 103 Wiring Diagram (Bottom View) Authorized distributors are likely to stock the following: None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1304 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT PMA/PMB series Three Phase Power Quality Monitor • Monitors deviation from nominal system voltage, phase imbalance, phase sequence and phase loss. • Locking potentiometer prevents tampering (PMA only). • Start-up delay permits staggered restarting (PMB only). • Four LEDs show nature of temporary/sustained faults. • 3-wire wye or delta connections for simple installation. • Calibrated nominal voltage potentiometer assures precise monitoring. • Superior transient immunity per ANSI C37.40. • Not fooled by back EMF. PMA PMB • 8 user-selectable thresholds – 4 undervoltage and 4 phase imbalance – match protection to load. Function • Manual or automatic reset for application flexibility. Three phase power quality monitor. • Suitable for commonly used grounded or ungrounded three-phase systems. Monitoring Specifications File E60363 Threshold Accuracy: ±0.2% of the average of 10 consecutive measure- File LR29186 ments of the threshold point at any fixed temperature within the operating temperature range. Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of ±2% of the average of 10 consecutive measure- the agencies/laboratories and review them to ensure the product meets the ments of the threshold point over the operating requirements for a given application. temperature range. Response Time: Phase loss and phase reversal: 2 line cycles +5 ms. Outline Dimensions Undervoltage and phase imbalance: See Figures 1 and 2 5.31 on the following page. (135) 1.78 4.94 (45) Input Data (125) 2.18 4.48 .89 .32 (55) (114) Nominal Voltage: 110 to 120VAC; 208 to 240VAC; 380 to 440VAC; (23) (8) 440 to 480VAC; 550 to 600VAC.. Maximum Voltage: 132VAC for the 110 to 120VAC model; 264VAC for the 208 to 240VAC model; 3.35 484VAC for the 380 to 440VAC model; (85) 3.85 528VAC for the 440 to 480VAC model; (98) 650VAC for the 550 to 600VAC model. 1.67 Frequency: 50/60 Hz. 3.35 (42) (85) Power Requirement: 750mW. Transient Noise Immunity: ICS 2-230, ANSI C37.40. CAPTIVE CLAMP SCREW #8 HEAD #6-32 BODY .22 Output Data .28 (6) (7) .37 Arrangement: 1 Form A (SPST-NO) + 1 Form B (SPST-NC). (9) .89 Rating: 8A @ 250VAC, resistive; 3A @ 30VDC, resistive; (23) 1/4 HP @ 125/250VAC; 275VAC pilot duty. .04 (1) Expected Mechcanical Life: 10,000,000 operations. Adapter Expected Electrical Life: 100,000 operations at rated resistive load. .58 Plate (15) 3.68 (93) 3.12 Initial Dielectric Strength (79) Between Input Terminals and Case or Active Circuitry: 2,200V. Between Relay Contacts and Active Circuitry: 1,500V. .218 1.09 .36 (6) (27) (9) DIA. TYP. 2.18 Environmental Data (55) Temperature Range: Storage: -40°C to +75°C. Ordering Information Operating: -10°C to +60°C. PMA LB S L Mechanical Data | | | | Mounting: Can be mounted on a flat surface with two screws or snapped Series Nominal Operating Voltage | Phase Imbalance on/off a furnished adapter plate which has been pre-mounted PMA = Power LA = 110 to 120VAC, 50/60 Hz. Threshold | on a flat surface. Can also be mounted on a 300-volt machine Quality Monitor LB = 208 to 240VAC, 50/60 Hz. L = Low (2-4%) | tool relay channel using the adapter plate. Direct mounting (no with Locking LG = 380 to 440VAC, 50/60 Hz. H = High (5-10%) adapter plate used) on a symmetrical DIN track is also possible. Potentiometer LC = 440 to 480VAC, 50/60 Hz. | Termination: Screw terminals. LD = 550 to 600VAC, 50/60 Hz. | Connections: 3 wire wye or delta. PMB = Power Status Indicators Vibration: Chatterless operation 5 to 60 Hz., 0.030 in.(0.762 mm) Quality Monitor S = "Contacts amplitude, 1 minute sweep. with Start-Up Transferred" and Status Indication: "Contacts Transferred" LED plus four additional LEDs Delay four fault status to designate the specific fault that released the relay. indicators Weight: 24 oz. (625g) approximately. Authorized distributors are likely to stock the following: None at present. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1305 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 AGASTAT Operation Monitor Operation: When the input voltage parameters are normal, the "Contacts Transferred" LED will be on and relay is energized. Once the unit has responded to a fault by releasing the output relay and simultaneously extinguishing the "Contacts Transferred" LED, the nature of the fault that caused the release will be identified by one of the four fault status indicators. In the automatic reset mode, the status indicator will extinguish and the "Contacts Transferred" LED will re-light once all faults are corrected and restart delay period has expired. In the manual reset mode, the fault indicator will flash when all faults have been corrected, thus indicating that the unit is ready for manual reset. When manually reset, the flashing fault status indicator will extinguish and the "Contacts Transferred" LED will re- light. Series PMA has a fixed start-up delay of approximately 375 millisec- onds. Series PMB has a start-up delay, adjustable from 0 to 5 minutes, which permits staggered restarting of motors, etc., affected by a common power outage. If the unit is wired for manual reset, the external reset switch must also be opened. The output relay will remain in the transferred state until one of the fault conditions occur. (See Figures 1 and 2) Phase Loss Condition: If the voltage of any phase drops below 68% of the nominal voltage setting for more than two line cycles, the output relay will release. If back EMF accompanies the loss of a phase, the unit will sense the loss as a phase imbalance and the relay will drop out. Figure 1 Phase Reversal Condition: If any two phases become reversed for more than two line cycles, the output relay will release. Undervoltage Condition: By strapping, the user can select one of four undervoltage thresholds: 10%, 14%, 17% or 20% below the nominal voltage, which is entered by means of a calibrated potentiometer located on the front panel. When the average voltage drops below the selected threshold, a time delay shown in Fig. 1 is initiated. The unit then continues to monitor the severity of the fault and modifies the time delay accordingly. If the undervoltage condition persists, the time delay will expire and the output relay will release. Phase Imbalance Condition: The unit continuously averages the three phase voltages and recognizes individual deviations from the average. By strapping, the user can select one of four imbalance thresholds: Either 2.0%, 3.0%, 3.5%, 4.0%, or 5.0%, 7.0%, 8.5%, 10.0% depending on model. When any phase voltage deviates more than the selected percent- age from the three phase average, a time delay as shown in Fig. 2 is initiated. The unit then continues to monitor the severity of the fault and modifies the time delay accordingly. If the phase imbalance condition persists, the time delay will expire and the output relay will release. Figure 2 Typical Connection Diagram Strapping Diagrams Undervoltage Threshold 67 8 9 10 10.0% TRANSFORMER (REQUIRED FOR LINE VOLTAGE >240VAC) 14.0% CONTROL VOLTAGE UP TO 240VAC 17.0% OL's START (IF USED) 20.0% STOP M L1 L2 L3 Low Phase Imbalance Threshold M Model PMAL*SL or PMBL*SL 6 789 10 12 34 5 2.0% MAN. FORM A N.O. FORM B N.C. 3.0% RESET CONTACTS CONTACTS 6 78 9 10 3.5% U1 U2 I 1 I 2 COMMON UNDERVOLTAGE PHASE IMBALANCE RESPONSE CURVES RESPONSE CURVES 4.0% 11 12 13 14 15 High Phase Imbalance Threshold ŞA ŞB ŞC M Model PMAL*SH or PMBL*SH VOLTAGE VOLTAGE VOLTAGE 6 789 10 5.0% LOAD 7.0% 8.5% 10.0% Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1306 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 P&B SDAS-01 series 1.5 To 15 Amp AC Current Sensor • Zero insertion loss • Inductive coupling to power line • Choice of modes – Adjustable overcurrent sensor – Adjustable undercurrent sensor • Solid state sensing circuit • 1 Form C (SPDT) or 2 Form C (DPDT) internal relay Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Sensing Modes Figure 1 – Typical Overcurrent Time Delay Curves Overcurrent sensor – Detects a current in excess of the value determined 10 by the potentiometer setting. A built-in time delay, 200 ms, minimum, allows for normal starting and surge currents. Actual time delay is dependent upon potentiometer setting and magnitude of overcurrent. Any overcurrent lasting longer than this causes the internal relay of the SDAS- 15 Amps 01 to energize. The relay will remain energized until sensor control voltage is removed, even if the overcurrent ceases to exist. 9 Amps 3 Amps Undercurrent sensor – Reacts to a complete loss of sense current, or any 1.0 current of less than the potentiometer setting. Upon application of sensor control voltage, there is a nominal 350ms delay during which time power line current must begin. This delay gives line components time to turn on. 1.5 Amps If, at the end of the delay, sense current should decrease to less than the potentiometer setting of the SDAS-01 and remain there for approximately 350 ms, the internal relay of the SDAS-01 will energize. It will remain energized until either sense control current again exceeds the potentiom- eter setting, or until sensor control voltage is removed. 0.1 x1 x10 x100 x1000 Engineering Data Sense Current Greater Than Poteniometer Control Voltage: 24VAC 50/60 Hz./DC ± 10%. Sense-Current Range: 1.5 to 15 amps AC. Internal Relay Contact Data: 1 Form C (SPDT) type (code X1): 5A @ 28VDC or 2.5A @ 120VAC, res. Ordering Information – 2 Form C (DPDT) type (code Y2): 2A @ 28VDC or 1A @ 120VAC, res. Distributors are more likely to stock boldface items. Set Point Variation: ±25% over operating temperature range. Undercurrent Sensors Time Delay: Part Number Contacts Mounting Overcurrent sensor: 200 ms, min., after beginning of overcurrent. Actual delay is dependent upon potentiometer setting and SDAS-01-7Y2S1024 DPDT, 2A DC/1A AC Socket SDAS-01-7X1S1024 SPDT, 5A DC/2.5A AC Socket magnitude of overcurrent (see Figure 1). Undercurrent sensor: 350 ms, typ.; 200 ms, min., from beginning of undercurrent after control voltage is applied. Overcurrent Sensors Power Requirement: 1.7W or 1.7VA @ 24VAC. Part Number Contacts Mounting Temperature Range: Storage: -40°C to +85°C. SDAS-01-8Y2S1024 DPDT, 2A DC/1A AC Socket Operating: -25°C to +70°C. Enclosure: Plastic dust cover. Mounting: Socket. For sockets see KUP 3 pole sockets. Weight: 3.17 oz. (90g) approximately. Outline Dimensions Wiring Diagrams – Bottom Views .291 MIN. .125 1 Form C (7.39) (3.18) INPUT VOLTS 25 AC .187 ± .002 3 or DC (4.75 ± .005) 9 .078 (1.98) 2.718 MAX. .515 MAX. .281 6 (70.64) (13.08) (7.14) 1.531 MAX. (38.89) .020 TYP. 2 Form C (0.51) 1 2 3 INPUT 4 5 6 VOLTS 25 1.406 MAX. AC 7 8 9 1 3 (35.71) or DC A B 7 9 4 6 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1307 specified. Refer to inside back cover. Time In Seconds Catalog 1308242 Issued 3-03 KILOVAC WD series DIN Rail or Screw Mounted Protective Relays • WD25 Paralleling (Synch Check) Relays • WD2759 Over/undervoltage Relays • WD32 Reverse Power Relays • WD47 Phase Sequence Relays • WD5051 Single- or Three-Phase Overcurrent Relays • WD81OU Over/Underfrequency Relays File E58048 DIN EN50022-35 Users should thoroughly review the technical data before selecting a product part number. It is recommended that user also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Overview Outline Dimensions The WD series offers several different models of protective relays in a 16 X M3.5 common package that is suitable for either DIN rail or screw mounting. These flexible, multifunction devices offer user selectable voltages, sense currents and frequencies. Adjustable time delays are standard. This allows a single part number to be suitable for multiple applications, thereby reduc- ing inventory costs. 1.38 2.87 (35.0) (73.0) Specifications common to all models Power Consumption: 2.5VA, maximum. Contact Ratings: 5 amps, resistive, at 120VAC. 5 amps, resistive, at 30VDC. Isolation from Control to Sense Inputs: 2,500VAC. Mechanical Life: 10 million operations. Shock: 10g. Vibration: 0.062 (1.57) double amplitude at 10-55 Hz. Terminals: M3.5 screws. 4.41 2 Maximum Wire Size: 2 x 24 AWG (2.5mm ) solid to DIN 46288 or 2 x 16 (112.0) 2 AWG (1.5mm ) stranded w/end sleeves. Operating Temperature Range: -40°C to +60°C. Enclosure: Plastic case (not sealed). Mounting Options: Snap mounts on standard DIN rail (DIN-EN 50022-35) or panel mounts with M4, M5, #8 or #10 screws. 0.35 (9.0) Weight: 14.4 oz. (400g) approximately. 2.95 (75.0) Installation and Maintenance Information M5 2.36 Installation: To mount the WD series protective relay on a DIN rail, hook M4 (60.0) the top edge of the cutout on the base of the case over one edge of the DIN rail, then press the opposite side of the cutout containing the release clip over the opposite side of the DIN rail. To remove or reposition the re- lay, lever the release clip and move the relay as required. WD series relays 2.36 should be installed in a dry location where the ambient temperature will be (60.0) within the operating temperature range. 1.97 Maintenance: WD series protective relays are solid state devices that re- (50.0) quire no maintenance. They are not designed to be serviced by the user. Consult KILOVAC customer service at 805-220-2023 if repairs should be necessary. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1308 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD25 Paralleling Relays • Function 25 • ANSI/IEEE C37.90-1978 WD25 Calibration WD25 Operation The calibration marks on the faceplate are provided only as guides. Proper WD25 paralleling relays are used to ensure that two circuits are synchro- calibration requires using an accurate voltmeter. Use the following proce- nized. When voltage, phase relationship and frequency are within the se- dure to calibrate the WD25: lected synchronizing limits, the output relay will energize. The WD25 paral- 1. Remove the cover. leling relay allows for a generator to be brought online without damage or 2. Adjust the SYNC VOLTAGE control fully counterclockwise (CCW). Apply system disturbance. WD25 series with a "dead bus" feature will energize nominal voltage to the LINE B (bus) sensing terminals. for a synchronized condition or an "on line" generator, "dead bus" condition. 3. Apply the maximum desired synchronization voltage to the LINE A (gen- This "dead bus" feature allows the generator to energize a dead bus. The erator) terminals. This voltage should be in phase with LINE B (bus) volt- "double dead bus" feature permits paralleling of two buses when: (a) both age and have the same frequency. the line voltages are equal and in phase, or (b) when either bus is "hot" and 4. Slowly adjust the SYNC VOLTAGE control clockwise (CW) until the relay the other bus is "dead." energizes. WD25 Specifications Nominal Operating Range: 120, 208, 277 or 480 VAC, selectable. Maximum Sensing Range: 575VAC. Nominal Frequency Range: 40-400. Contact Form: 2 form C (DPDT). WD25 Controls Sense Voltage: Voltage (nominal) 120 208 277 480 Synch Voltage (% of nom.) 6 - 30% (≈ 4°- 20° electrical degree) Dead Bus Voltage (% of nom.) 10 - 70% (Dead Bus) Control Voltage: Model WD25 -0X1 -0X2 -0X3 Input Voltage (VDC) 18 to 54 13.5 to 32 100 to 200 Input Voltage (VAC) – – 100 to 140 Ordering Information Typical Part Number B WD 25 -00 2 1. Basic Series: WD = DIN mount Protective Relay. 2. Type: 25 = Paralleling Relay. WD25 Connections 3. Dead Bus: 00 = Double Dead Bus 01 = Single Dead Bus 02 = Generator to Generator 4. Control Voltage: 1 = 18 to 54VDC 2 = 13.5 to 32 VDC 3 = 100-200VDC or 100-140VAC. Our authorized distributor is more likely to stock these items. WD25-001 WD25-013 WD25 Typical Hookup NOTE: For single dead bus option, connect the generator to 1 & 2 and the bus to 4 & 5. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1309 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD2759 Over/Undervoltage Relays • Function 27/59 • ANSI/IEEE C37.90-1978 WD2759 Calibration WD2759 Operation The calibration marks on the faceplate have a maximum error of 10% and WD2759 AC voltage sensing relays provide voltage monitoring and protection are provided only as guides. Proper calibration requires using an accurate in AC systems from 50 to 400 Hz. Sensing voltages, number of phases, over and undervoltage setpoint, and time delays are user configured. WD2759 voltmeter in parallel with the input signal. Use the following procedure to calibrate your relay. voltage relays operate when the externally adjustable trip point is reached. An external time delay control is provided with an adjustment of .5 to 10 seconds. OVER VOLTAGE This time delay may be used to prevent false tripping when there are slight 1. Remove cover. variations in the voltage supply. On overvoltage (OV) the output relay 2. Adjust the TRIP SET control fully clockwise (CW) and the TIME DELAY energizes when the input signal exceeds the trip point. On undervoltage (UV) the output relay de-energizes when the input signal goes below the trip point. control fully counterclockwise (CCW). 3. Apply the desired trip voltage to the relay. A green LED indicates power to the relay. Red LED lights indicate the state 4. Slowly adjust the TRIP SET control CCW until the relay trips. of the undervoltage and overvoltage trips. 5. Remove the applied voltage (do not change the voltage level) and set WD2759 Specifications the TIME DELAY control to the desired time delay. 6. Apply the trip voltage to the relay and measure the time to trip. Nominal Operating Range: 120, 208, 277 or 480 VAC, selectable. Maximum Sensing Range: 700VAC. 7. Adjust the TIME DELAY and repeat steps 4 and 5 until you have the desired time delay. Nominal Frequency Range: 50-400 Hz. Contact Form: 1 form C (SPDT) for undervoltage and 1 form C (SPDT) for UNDER VOLTAGE overvoltage. 1. Remove cover. Time Delay Adjustment: 0.5 to 10 sec. 2. Adjust the TRIP SET control fully CCW and the TIME DELAY control fully Sense Voltage: CCW. Voltage (nominal) 120 208 277 480 3. Decrease the applied sensing voltage from the nominal value until the UV Adjustment Range 72-120 125-208 166-277 288-480 desired tripping voltage is reached. OV Adjustment Range 120-168 208-291 277-388 480-672 4. Slowly adjust the TRIP SET control CW until the relay trips. 5. Set the TIME DELAY control to the desired time delay and apply Control Voltage: nominal voltage to the relay. Model WD2759 -001 -002 -003 6. Step down the applied voltage from nominal to a level jest below the Input Voltage (VDC) 18 to 54 13.5 to 32 100 to 200 trip level set in Step 3 and measure the time delay. Input Voltage (VAC) – – 100 to 140 7. Adjust the TIME DELAY and repeat steps 4 and 5 until the desired time delay is achieved. Ordering Information WD2759 Controls Typical Part Number B WD 2759 -002 1. Basic Series: WD = DIN mount Protective Relay. 2. Type: 2759 = Over/Undervoltage Relay. 3. Control Voltage: 001 = 18 to 54VDC 002 = 13.5 to 32 VDC 003 = 100-200VDC or 100-140VAC. Our authorized distributor is more likely to stock these items. WD2759-003. WD2759 Connections WD2759 Typical Hookup Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1310 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD32 Reverse Power Relays • Function 32 WD32 Calibration WD32 Operation WD32 reverse power relays are used to monitor the direction of power from The calibration marks on the faceplate have a maximum error of 10% and are provided only as guides. Proper calibration requires using an accurate AC generators. This is accomplished by measuring I cos q. If current from the Current Meter in series with the input current. Use the following generator is reversed and exceeds the adjustable setting, the relay will trip. A procedure to calibrate your relay. 0.5 to 20 second time delay is provided. A correct setting of the trip point and time delay will prevent motorizing the generator and prevent tripping during REVERSE POWER 1. Remove cover. transients that occur while synchronizing. A POWER LED indicates the 2. Adjust the TRIP SET control fully clockwise (CW) and the TIME condition of the power supply and a REVERSE POWER TRIP LED indicates the DELAY control fully counterclockwise (CCW). output status of the relay. 3. Apply the desired trip current to the relay. NOTE: for the Reverse Power (WD32-00X) a resistive load must be used and for the Reverse WD32 Specifications KVAR (WD32-01X) an inductive load must be used. Nominal Operating Range: 120 to 480 VAC, 1 or 3 phase. 4. Slowly adjust the TRIP SET control CCW until the relay trips. Maximum Sensing Range: 575VAC. 5. Remove the applied Current and set the TIME DELAY control to the Nominal Sensing Current: 5A. desired time delay. Nominal Frequency Range: WD32-00X: 40-400 Hz.; WD32-01X: 60 Hz. 6. Re-apply the Current (10% more than the trip current) to the relay and Contact Form: 2 form C (DPDT). measure the time to trip. Time Delay Adjustment: 0.5 to 20 sec. 7. Adjust the TIME DELAY and repeat steps 4 and 5 until you have the Sense Current: desired time delay. Reverse Power Trip: 0.2 to 1.0A (4-20% of nominal sense current). Control Voltage: WD32 Controls Model WD32 -001 -002 -003 Input Voltage (VDC) 18 to 54 13.5 to 32 100 to 200 Input Voltage (VAC) – – 100 to 140 Ordering Information Typical Part Number B WD 32 -00 2 1. Basic Series: WD = DIN mount Protective Relay. 2. Type: 32 = Reverse Power Relay. 3. Load: 00 = Resistive (power) WD32 Connections 01 = Inductive (Kvar, 60 Hz.) 4. Control Voltage: 1 = 18 to 54VDC 2 = 13.5 to 32 VDC 3 = 100-200VDC or 100-140VAC. Our authorized distributor is more likely to stock these items. WD32-003 WD32-011 WD32 Typical Hookup Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1311 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD47 Phase Sequence Relays • Function 47 • ANSI/IEEE C37.90-1978 WD47 Calibration WD47 Operation The WD47 has no adjustments and no calibration is necessary. Proper WD47 phase sequence relays are designed to monitor the correct phase operation may be verified as follows: rotation and loss of phase of three phase ac systems from 50 to 400 Hz. An 1. Apply a nominal, three-phase input with the correct phase sequence. incorrect phase sequence or loss of any phase will cause the WD47 to pickup. The output relay should dropout and the green LED should light. When the phase sequence is corrected or the lost phase is restored the 2. Apply a nominal, three-phase input with an incorrect phase sequence. contacts dropout. Red LED's light to indicate a fault condition. A green LED The output relay should pickup and the red LED should light. indicates power to the relay. The WD47 is often used to detect reverse phase 3. Apply only one or two phases with the correct phase sequence. The rotation or loss of phase to generators, busses, motors, and transformers. output relay should pickup and the red LED should light. WD47 Specifications Nominal Operating Range: 120 to 480 VAC. WD47 Controls Maximum Sensing Range: 575VAC. Nominal Frequency Range: 40-400 Hz. Contact Form: 2 form C (DPDT). Control Voltage: Model WD47 -001 -002 -003 Input Voltage (VDC) 18 to 54 13.5 to 32 100 to 200 Input Voltage (VAC) – – 100 to 140 Ordering Information Typical Part Number B WD 47 -002 1. Basic Series: WD47 Connections WD = DIN mount Protective Relay. 2. Type: 47= Phase Sequence Relay. 3. Control Voltage: 001 = 18 to 54VDC 002 = 13.5 to 32 VDC 003 = 100-200VDC or 100-140VAC. Our authorized distributor is more likely to stock these items. WD47-001 WD47 Typical Hookup Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1312 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD5051 1Ş and 3Ş Overcurrent Relays • Function 5051 WD5051 Calibration WD5051 Operation WD5051 AC current sensing relays provide current monitoring and protection The calibration marks on the faceplate are provided only as guides. Proper calibration requires using an accurate ammeter in series with the current in AC systems from 50 to 400 Hz. Nominal Sensing Current, Instantaneous source. Use the following procedure to calibrate your relay: Over Current setpoint, Time Over Current setpoint, and Time Over Current OVERCURRENT time delay are user configured. WD5051 current relays operate when the 1. Remover the cover. externally adjustable trip point is reached. An external time over current time 2. Adjust the TRIP SET control fully clockwise (CW) and the TIME delay control is provided with an adjustment of .5 to 20 seconds. This time DELAY control (TOC only) fully counterclockwise (CCW). delay may be used to prevent false tripping when there are slight variations in 3. Apply the desired trip current to the relay. the sensed current. With control power applied, the Instantaneous Over 4. Slowly adjust the TRIP SET control CCW until the relay trips. Current (IOC) contacts pick-up when the input signal exceeds the IOC trip 5. Remove the applied current (do not change the current level). Set the setpoint. Similarly, with control power applied, the Time Over Current (TOC) contacts pick-up after the preset time delay when the Sense Current rises TIME DELAY (TOC only) control to the desired time delay. above the TOC trip setpoint. The IOC contacts may also be configured to function as an under current relay. A green LED indicates power to the relay. WD5051 Controls Red LED lights indicate the state of the IOC and TOC trips. WD5051 Specifications Sense Current Full Scale: 1, 3, 6 or 8A, selectable. Maximum Sensing Current: 10A continuous; 30A for 10 sec.; 60A for 2.5 sec.; 100A for 0.9 sec.. Nominal Frequency Range: 50-400 Hz. Contact Form: 1 form C (SPDT) for IOC and 1 form C (SPDT) for TOC. TOC Time Delay Adjustment: 0.5 to 20 sec. IOC Operate Time (max.): 0.2 sec. Sense Current: Current (nominal) 1368 IOC 0.2 to 1.2 0.6 to 3.6 1.2 to 7.2 1.6 to 9.6 TOC 0.2 to 1.2 0.6 to 3.6 1.2 to 7.2 1.6 to 9.6 WD5051 Connections Control Voltage: Model WD5051 -001 -002 -003 Input Voltage (VDC) 18 to 54 13.5 to 32 100 to 200 WD5051 Input Voltage (VAC) – – 100 to 140 Single Phase Model Ordering Information Typical Part Number B WD 5051 -002 1. Basic Series: WD = DIN mount Protective Relay. 2. Type: 5051 = Single Phase Overcurrent Relay. 5051-3 = Three Phase Overcurrent Relay. WD5051-3 3. Control Voltage: Three Phase Model 001 = 18 to 54VDC 002 = 13.5 to 32 VDC 003 = 100-200VDC 0r 100-140VAC. Our authorized distributors are more likely to stock these items. WD5051-001 WD5051-003 WD5051-3-001 WD5051 Typical Hookup WD5051-3 WD5051 Three Phase Model Single Phase Model Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1313 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC WD81OU Over/Underfrequency Relays • Function 81 OU • ANSI/IEEE C37.90-1978 WD81OU Calibration WD81OU Operation The calibration marks on the faceplate are provided only as guides. Proper WD81OU frequency relays are used to provide frequency monitoring and calibration requires using an accurate frequency meter in parallel with the protection to generators, buses, power supplies, and other equipment. The input signal. relay operates at voltages from 120 to 480 Vac and at nominal frequencies of 50, 60, and 400 Hz. External controls include nominal frequency selection, UNDER FREQUENCY under frequency (UF) trip set, over frequency (OF) trip set, UF time delay, and 1. Remove the cover. OF time delay. A green LED indicates power to the relay. Red LED’s indicate 2. Set the SENSE FREQUENCY to the nominal system frequency. Adjust the status of the UF and OF trips. the Under Frequency TRIP SET fully clockwise (CW) and the TIME DELAY control fully counterclockwise (CCW). 3. Apply the desired trip frequency to the relay. WD81OU Specifications 4. Slowly adjust the TRIP SET control CCW until the relay trips. 5. Set the TIME DELAY control to the desired time delay and apply Nominal Operating Frequency: 50, 60 or 400 Hz., selectable. nominal frequency to the relay. Maximum Frequency @ 400Hz. Nominal: 1000 Hz. 6. Step down the applied frequency from nominal to just below the trip Nominal Sensing Voltage: 20-480VAC. level set in Step 4 and measure the time delay. Maximum Sensing Voltage: 575VAC. 7. Adjust the TIME DELAY and repeat steps 5 and 6 until the desired time Contact Form: 1 form C (SPDT) for underfrequency and 1 form C (SPDT) delay is set. for overfrequency. OVER FREQUENCY Time Delay Adjustment: 0.5 to 10 sec. 1. Remove the cover. Sense Frequency: 2. Set the SENSE FREQUENCY to the nominal system frequency. Adjust Frequency (nominal) 50 60 400 the OF TRIP SET and TIME DELAY controls fully counterclockwise UF Adjustment Range 40-50 48-60 360-400 (CCW). OF Adjustment Range 50-60 60-72 400-480 3. Apply the desired trip frequency to the relay. 4. Slowly adjust the TRIP SET control clockwise (CW) until the relay trips. Control Voltage: 5. Set the TIME DELAY control to the desired time delay and apply nominal frequency to the relay. Model WD81OU -001 -002 -003 6. Step down the applied frequency from nominal to just below the trip Input Voltage (VDC) 18 to 54 13.5 to 32 100 to 200 level set in Step 4 and measure the time delay. Input Voltage (VAC) – – 100 to 140 7. Adjust the TIME DELAY and repeat steps 5 and 6 until the desired time delay is set. Ordering Information WD81OU Controls Typical Part Number B WD 81OU -002 1. Basic Series: WD = DIN mount Protective Relay. 2. Type: 81OU = Over/Underfrequency Relay. 3. Control Voltage: 001 = 18 to 54VDC 002 = 13.5 to 32 VDC 003 = 100-200VDC or 100-140VAC. Our authorized distributors are more likely to stock these items. None at present. WD81OU Typical Hookup WD81OU Connections Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1314 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 HIGH PERFORMANCE RELAY PRODUCTS Alphanumeric Index Series Type Page Circuit Breakers........................ 101-124 1 0.100 Grid Relays ............................................................... 1403 1/5 Size Relays ................................................................... 1404 AC Contactors .................................................................... 1407 AC/DC Contactors .............................................................. 1408 Transformers.............................. 201-212 2 AC and DC High Voltage Contactors .................................. 1409 DC Automatic Dropout Contactors .................................... 1409 DC Contactors .................................................................... 1407 Low-signal PC Board Relays. 301-336 3 DC Reverse Current Contactors......................................... 1408 Full Size Relays .................................................................. 1404 Half Size Relays.................................................................. 1404 Mid-Range PC Board Relays ....... 19-21 High-Frequency Relays ...................................................... 1403 4 High Voltage DC Contactors .............................................. 1410 High Voltage Relays to 9kV ................................................ 1410 High Voltage Relays to 70kV .............................................. 1411 Power PC Board Relays ................ 22-35 5 Monitors ............................................................................. 1408 Over/Under Frequency Relays ........................................... 1412 NOTE: This section of the databook provides only a brief Over/Under Voltage Relays ................................................ 1412 overview of our CII, HARTMAN and KILOVAC high Relays with performance relay products. For more detailed Paralleling Relay ................................................................. 1412 6 Forcibly-Guided Contacts.............. 36-79 specifications on these products, visit our website at Phase Sequence Relay....................................................... 1412 www.tycoelectronics.com. Plug-In Contactors .............................................................. 1408 Plug-in/Panel Mount Power Distribution Systems .............................................. 1409 7 General Purpose Relays............701-749 Protective Relays ............................................................... 1412 Sensors .................................................................... 1405, 1408 Single Phase Overcurrent Relay......................................... 1412 Power Relays & Definite 8 Solenoids............................................................................ 1406 Purpose Contactors...................... 89-131 Solid State Relays .............................................................. 1405 Space Contactors ............................................................... 1409 Latching, Impulse & T0-5 Relays......................................................................... 1402 9 Rotary Relays ...............................149-154 Three Phase Overcurrent Relay ......................................... 1412 Timers ................................................................................ 1405 Automotive Relays................ 1001-1025 10 Solid State Relays & 11 Input/Output Modules.........1101-1125 Time Delay Relays & 12 Counters ........................................208-232 Sensors & Monitors ...................233-234 13 High Performance Relays and Contactors (overview) ... 1401-1412 14 Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1401 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 CII High Performance Signal Level Relays T0-5 Relays • Hermetically Sealed • Standard or Sensitive Coils • Optional Diodes/Transistors Sensitive Standard Version Version Standard Version P/N Series Contact Form Contact Rating Coil Voltage Temperature Rating Vibration Shock Mil-Spec Features/Options HM 2 Form C Up to 1A 5 to 30 Vdc -55° to +85°C 10 G's 30 G's Commercial 1 HMD 2 Form C Up to 1A 5 to 30 Vdc -55° to +85°C 10 G's 30 G's Commercial 1 HS 2 Form C Up to 1A 5 to 48 Vdc -55° to +85°C 10 G's 30 G's Commercial 1 HSD 2 Form C Up to 1A 5 to 48 Vdc -55° to +85°C 10 G's 30 G's Commercial 1 MA 2 Form C Up to 1A 5 to 30 Vdc -65° to +125°C 30 G's 75 G's M39016/9 1.5 1MA 1 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M39016/7 1.5 MAD 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M39016/15 1.5 1MAD 1 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M39016/23 1.5 MADD 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M39016/20 1.5 1MADD 1 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M39016/24 1.5 MAT 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M28776/1 1.5 1MAT 1 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M28776/5 1.5 MAV 2 Form C Up to 1A 5 to 30 Vdc -65° to +125°C 380 G's 150 G's M39016/9 Design MAVD 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 380 G's 150 G's M39016/15 Design MAVDD 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 380 G's 150 G's M39016/20 Design MS 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's M39016/11 1.5 1MS 1 Form C Up to 1A 5 to 40 Vdc -65° to +125°C 30 G's 75 G's M39016/10 1.5 MSD 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's M39016/16 1.5 1MSD 1 Form C Up to 1A 5 to 40 Vdc -65° to +125°C 30 G's 75 G's M39016/25 1.5 MSDD 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's M39016/21 1.5 1MSDD 1 Form C Up to 1A 5 to 40 Vdc -65° to +125°C 30 G's 75 G's M39016/26 1.5 MST 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's M28776/3 1.5 1MST 1 Form C Up to 1A 5 to 40 Vdc -65° to +125°C 30 G's 75 G's M28776/4 1.5 MSV 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 380 G's 150 G's M39016/11 Design MSVD 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 380 G's 150 G's M39016/16 Design MSVDD 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 380 G's 150 G's M39016/21 Design PRMA 2 Form C Up to 1A 5 to 30 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PR1MA 1 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PRMAD 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PR1MAD 1 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PRMADD 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PR1MADD 1 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PRMAT 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PR1MAT 1 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PRMS 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PR1MS 1 Form C Up to 1A 5 to 40 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PRMSD 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PR1MSD 1 Form C Up to 1A 5 to 40 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PRMSDD 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PR1MSDD 1 Form C Up to 1A 5 to 40 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PRMST 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PR1MST 1 Form C Up to 1A 5 to 40 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 * Commercial-Off-The-Shelf Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1402 specified. Refer to inside back cover. Standard Coil Sensitive Coil Diode Version Dual Diode Version Transistor Version Long Life Version Spreader Pads RF Performance (GHz) Catalog 1308242 Issued 3-03 CII High Performance Signal Level Relays MOSFET .100 Grid Relays Surface Mount Version • Hermetically Sealed Version • Standard or Sensitive Coils • Optional Diodes/MOSFETs Sensitive Version P/N Series Contact Form Contact Rating Coil Voltage Temperature Rating Vibration Shock Mil-Spec Features/Options Commercial 2 Form C Up to 1A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial 1 HC HCD 2 Form C Up to 1A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial 1 HCS 2 Form C Up to 1A 5 to 48 Vdc -55° to +85°C 10 G's 30 G's Commercial 1 2 Form C Up to 1A 5 to 48 Vdc -55° to +85°C 10 G's 30 G's Commercial 1 HCSD SHC 2 Form C Up to 1A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial 1 SHCD 2 Form C Up to 1A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial 1 2 Form C Up to 1A 5 to 48 Vdc -55° to +85°C 10 G's 30 G's Commercial 1 SHCS SHCSD 2 Form C Up to 1A 5 to 48 Vdc -55° to +85°C 10 G's 30 G's Commercial 1 MGA 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M39016/17 1.5 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M39016/18 1.5 MGAD MGADD 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M39016/19 1.5 MGAT 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M28776/6 1.5 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M39016/17 Design 1.5 SMGA SMGAD 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M39016/18 Design 1.5 SMGADD 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M39016/19 Design 1.5 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's M39016/41 1.5 MGS MGSD 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's M39016/42 1.5 MGSDD 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's M39016/43 1.5 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's M28776/7 1.5 MGST SMGS 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's M39016/41 Design 1.5 SMGSD 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's M39016/42 Design 1.5 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's M39016/43 Design 1.5 SMGSDD PRMGA 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PRMGAD 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PRMGADD PRMGAT 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PRMGS 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PRMGSD PRMGSDD 2 Form C Up to 1A 5 to 48 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 PRMGST 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 75 G's COTS Version* 1.5 * Commercial-Off-The-Shelf High Frequency Relays • Hermetically Sealed • Standard or Sensitive Coils Standard Sensitive • Standard or High Performance Versions T0-5 Grid Package Package • Excellent RF Performance P/N Series Contact Form Contact Rating Coil Voltage Temperature Rating Vibration Shock Mil-Spec Features/Options MW3 2 Form C Up to 1A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial 3 MW3S 2 Form C Up to 1A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial 3 MW4 2 Form C Up to 1A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial 4 MW4S 2 Form C Up to 1A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial 4 MW6 2 Form C Up to 1A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial 6 MW6S 2 Form C Up to 1A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial 6 MW3HP 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 100 G's Commercial 3 MW3HPS 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 100 G's Commercial 3 MW4HP 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 100 G's Commercial 4 MW4HPS 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 100 G's Commercial 4 MW6 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 100 G's Commercial 6 MW6HPS 2 Form C Up to 1A 5 to 26.5 Vdc -65° to +125°C 30 G's 100 G's Commercial 6 RF Performance Excellence - MW series high frequency relays are designed to provide excellent insertion loss repeatability over the frequency range from DC to 6 GHz. Exceptional isolation performance makes the MW series relays the logical choices for high performance RF applications. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1403 specified. Refer to inside back Standard Coil Sensitive Coil Standard Coil Diode Version Sensitive Coil Dual Diode Version Ground Pins MOSFET Version T0-5 Package Surface Mount Version Grid Package Mounting Pads RF Performance (GHz) RF Performance (GHz) Catalog 1308242 Issued 3-03 CII High Performance Subminiature Relays 1/5 Size Relays 4 Pole 4 Pole • Hermetically Sealed Grid Grid • Optional Terminals • Optional Mounting Styles 2 Pole Standard P/N Series Contact Form Contact Rating Coil Voltage Temperature Rating Vibration Shock Mil-Spec Features/Options 3SBC 2 Form C Up to 2A 5 to 36 Vdc -65° to +125°C 30 G's 100 G's M39016/13, 37, 38 3SBH 4 Form C Up to 2A 6 to 36 Vdc -65° to +125°C 30 G's 100 G's M39016/14, 53, 54 3SBM 4 Form C Up to 2A 6 to 26.5 Vdc -65° to +125°C 30 G's 150 G's M39016/31, 35, 36 3SCC 2 Form C Up to 2A 5 to 36 Vdc -40° to +125°C 30 G's 100 G's Commercial 3SDH 4 Form C Up to 2A 6 to 36 Vdc -40° to +125°C 30 G's 100 G's Commercial 1 Pole Half Size Relays Version • Hermetically Sealed • Optional Terminals Coaxial • Optional Mounting Styles 2 Pole Cables Version Version P/N Series Contact Form Contact Rating Coil Voltage Temperature Rating Vibration Shock Mil-Spec Features/Options C 1 Form C Up to 10A 6 to 26.5 Vdc -65° to +125°C 20 G's 100 G's M39016 Design HFC 2 Form C Up to 2A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial HFC4A 2 Form C Up to 4A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial HFC5A 2 Form C Up to 5A 5 to 26.5 Vdc -55° to +85°C 10 G's 30 G's Commercial HFW 2 Form C Up to 2A 5 to 48 Vdc -65° to +125°C 30 G's 100 G's M39016/6 HFW4A 2 Form C Up to 4A 5 to 48 Vdc -65° to +125°C 30 G's 100 G's M39016/6 Design HFW5A 2 Form C Up to 5A 5 to 26.5 Vdc -65° to +125°C 30 G's 100 G's M39016/6 Design HMB 2 Form C Up to 2A 6 to 26.5 Vdc -65° to +125°C 30 G's 100 G's M39016/22 HMS 2 Form C Up to 2A 5 to 36 Vdc -65° to +125°C 20 G's 100 G's M39016/44 LR 4 Form C Up to 2A 5 to 48 Vdc -65° to +125°C 30 G's 100 G's M39016 Design LS 2 Form C Up to 2A 5 to 48 Vdc -65° to +125°C 30 G's 100 G's Commercial RFK 1 or 2 Form C Up to 2A 6 to 26.5 Vdc -65° to +85°C 20 G's 100 G's Commercial SR 4 Form C Up to 2A 6 to 26.5 Vdc -65° to +125°C 20 G's 100 G's M39016/40 SS 6 Form C Up to 2A 6 to 26.5 Vdc -65° to +125°C 20 G's 100 G's M39016 Design Full Size Relays 10 Amp • Hermetically Sealed Tall Full Size • Optional Terminals Full Size • Optional Mounting Styles Standard Full Size ** 07 relay is also qualified to MS 27245 & MS27247 P/N Series Contact Form Contact Rating Coil Voltage Temperature Rating Vibration Shock Mil-Spec Features/Options 02 2 Form C Up to 2A 6 to 26.5 Vdc -65° to +125°C 20 G's 100 G's M5757/8 07 2 Form C Up to 10A 6-120 Vdc, 115 Vac -65° to +125°C 30 G's 100 G's M5757/23** 3SAM 2 Form C Up to 2A 6 to 24 Vdc -65° to +125°C 30 G's 150 G's M39016/32 3SDM 2 Form C Up to 2A 6 to 24 Vdc -65° to +125°C 30 G's 150 G's M39016 Design FW 2 Form C Up to 3A 6.3 to 110 Vdc -65° to +125°C 20 G's 100 G's M5757/10 FW5A 2 Form C Up to 5A 6.3 to 110 Vdc -65° to +125°C 20 G's 100 G's M5757/10 Design RD4 4 Form C Up to 2A 6 to 26.5 Vdc -65° to +125°C 20 G's 100 G's M5757/7 RD6 6 Form C Up to 2A 6 to 26.5 Vdc -65° to +125°C 20 G's 100 G's M5757/1 RFB 1 or 2 Form C Up to 2A 6 to 26.5 Vdc -65° to +85°C 20 G's 100 G's M5757 Design SF 2 Form C Up to 2A 1.8 to 40 Vdc -65° to +125°C 15 G's 100 G's M5757/13 Design SF5A 2 Form C Up to 5A 1.8 to 40 Vdc -65° to +125°C 15 G's 100 G's M5757/13 Design Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1404 specified. Refer to inside back cover. Standard Coil Standard Coil Standard Coil Bifilar Coil Bifilar Coil Grid Version Special Wiring Available Sensitive Coil Latching Design Latching Design Latching Design Low Profile Optional Diode Optional Diode Optional Diode Multi-pole Configurations Long Life Version Optional Dual Diode Coaxial Cables Coaxial Cables Long Life Version Excellent RF Switching Excellent RF Switching Excellent RF Switching Catalog 1308242 Issued 3-03 CII High Reliability Space Relays Products Services Features CII Hi-Rel products from Tyco Electronics are Half Size Non-Latching • High shock ratings 1, 2, 4, 6 Form C configurations, low level extensively tested to assure that your • High vibration ratings to 10 amps switching reliability standards and requirements • Latching versions are met or exceeded. Our services include: • Class 100 cleanroom Half Size Latching 2 and 4 Form C configurations, low level • Welded assemblies • Precision cleaning to 2 amps switching • Small particle inspection Applications 1/5 Size Non-Latching • Particle impact noise detection • Space satellites 2 and 4 Form C configurations, low level (telecommunications) to 2 amps switching • Serialized test data • Weather tracking 1/5 Size Latching • High shock testing • Surveillance 4 Form C, low level to • Test profiles can be • High vibration testing • Infrared observation 2 amps switching instrumentation tailored to individual • X-ray testing T0-5/.100 Grid • Missile systems 2 Form C, round and square outlines, low customer requirements. • Qualification testing • Torpedo guidance circuits level to 1 amp switching High Performance Solid State Relays DS11 Series DS13 Series JDS9-1Y JPS10 Series PS12-1Y DESC 88062 Qualified DESC 90091 Qualified M28750/9 Qualified M28750/10 Qualified DESC 86031Qualified 60 Vdc Output Voltage 60 Vdc Output Voltage 250 Vrms Output Voltage 250 Vrms Output Voltage 250 Vrms Output Voltage 2 Adc Output Current 2 Adc Output Current 2 Arms Output Current 25 Arms Output Current 10 Arms Output Current • Hermetically sealed DIP • Hermetically sealed DIP • Hermetically sealed DIP • Rugged encapsulated module • Rugged encapsulated module package package package • Optically isolated • Optically isolated • Thick film hybrid construction • Thick film hybrid construction • Thick film hybrid construction • Zero voltage turn-on • Zero voltage turn-on • Optically isolated • Optically isolated • Optically isolated • High transient immunity • High transient immunity • Low on-resistance (MOSFET • Low on-resistance (MOSFET • Zero voltage turn-on • 3.8-32 Vdc current regulated • 3.8-32 Vdc current regulated output) output) • High transient immunity input input • Optional switch status, short • Optional switch status, short • 3.8-32 Vdc current regulated circuit protection, trip status circuit protection, trip status input High Performance High Performance Timers and Sensors DC Solid State Relay / Power Controller Timers - Solid State Output Timers - Relay Output Sensors 1800/1900 Series 1600/1700 Series 1300/1350 Series PC2.5D10-2B Delay on operate, adjustable or Delay on operate, adjustable or fixed, Voltage sensors, DC and AC input, 60 Vdc Output Voltage fixed time delay, AC or DC input, optional mounting styles 2.5 Adc Output Current optional mounting styles optional mounting styles Built-in Circuit Protection 4800 Series 4600/4700 Series 1400 Series • Combines isolated load switching Interval timers, fixed time delay, Interval timers, adjustable or fixed, Phase sensors, 60 or 400 Hz, and circuit protection capabilities optional mounting styles AC or DC input, optional mounting styles • Fast acting, bounce free switching optional mounting styles • Carries full rated current (2.5A) without heat sinking to 90°C 6001/6155 Series 5600/5700 Series 7000 Series • Low output on-resistance and Delay on operate, fixed time delay, Delay on release, adjustable or fixed, Frequency sensors, 50 to 440 Hz, voltage drop 14 pin metal DIP, thick film hybrid, optional mounting styles digital logic design, • Meets surge requirement of meets Mil-R-83726/13 optional mounting styles 2400 Series MIL-STD-1275 & MIL-STD-740A • Nuclear tolerance tested Delay on operate, miniature package, • Hermetically sealed package fixed, optional mounting styles • Thick film hybrid construction Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1405 specified. Refer to inside back cover. COTS Version Available COTS Version Available COTS Version Available COTS Version Available COTS Version Available NEW PRODUCT Catalog 1308242 Issued 3-03 CII High Performance DC Tubular Solenoids – Series 3000 Pull-Type Solenoid Push-Type Solenoid Switch-Type Solenoid Custom configurations available Custom configurations available Custom configurations available DC tubular pull-type solenoids are DC tubular push-type solenoids DC tubular switch-type solenoids designed to provide up to 90 lbs of provide up to 120 lbs of force with a provide up to 50 lbs of force with a maximum stroke of 1 inch. force with a maximum stroke of .500 maximum stroke of .562 inches. inches. Actual usable force will depend on Actual usable force will depend on the stroke and power level. Actual usable force will depend on the stroke and power level. the stroke and power level. Coils are available from 12 to 115 Coils are available from 6 to 115 Vdc Vdc. Two coils are utilized, one Coils are available from 6 to 115 Vdc with a continuous duty power level of energized at pull-in for extra force with a continuous duty power level 3 to 36 watts and an intermittent and a holding coil for continuous of 2.2 to 54 watts and an duty power level of 9 to 240 watts. operation. Intermittent duty power intermittent duty power level of 12 to level of 112 to 700 watts and a continuous power level of 3 to 14 585 watts. watts. High Performance Custom Solenoids – Series 7000 Tyco Electronics can provide customized solenoids with many of the following features : Solenoid Styles Connector Styles Mounting Styles Plunger Styles High Temperature Flexible Leads Round Flanges Internal Threads 400Hz AC Connector Assemblies Square Flanges External Threads Commercial AC Threaded Flanges Clevice Plungers Right Angle AN Connectors Shaped Flanges Airframe Square Flange AN Connectors Extension Plungers Heavy Duty Quick-Connects Captive Plungers Two Coil Designs Screw, Solder & Stud Terminals Pressure Sealed Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1406 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 HARTMAN High Performance AC Contactors FEATURES: Side Stable Contactors • High reliability Latching Contactors • Meets requirements of Mil-R-6106 Center Off Contactors • Hermetic or gasket seal available • Repairable • Easily tailored to customer requirements P/N Current Rating Description P/N Current Rating Description DH-7YC 25 Amps 4PST N.O., 115/208 VAC, 400 Hz D-31TFA 100 Amps 3PDT, Center Off, 115/208 VAC, 400 Hz B-347A 25 Amps 3PDT, Double Break, 115/220 VAC, 400 Hz B-233R 120 Amps 3PDT, 115/200 VAC, 400 Hz DH-14B-3 25 Amps 3PDT, 115/200 VAC, 400 Hz BH-201B 120 Amps 3PST N.O., 115/200 VAC, 400 Hz B-252 30 Amps 3PDT, Center Off, 115/200 VAC, 400 Hz D-100A 120 Amps 3PST N.O., 115/200 VAC, 400 Hz B-140C 30 Amps 3PDT, Center Off, 120 VAC, 60 Hz B-435K-3 140 Amps 3PDT, Center Off, 115/200 VAC, 400 Hz N-415A-1 30 Amps 3PDT, Double Break, 115/200 VAC, 400 Hz B-233T 160 Amps 3PDT, 115/200 VAC, 400 Hz SA106E 30 Amps 3PDT, 115 VAC, 400/60 Hz B-451 175 Amps 3PST, Magnetic Latch, 115/200 VAC, 400 Hz DH-7ZAB 50 Amps 3PDT, 115/200 VAC, 400 Hz B-312D-1 175 Amps 3PST N.O., 120/208 VAC, 50/60 Hz D-7GRZ 50 Amps 3PDT, 115/200 VAC, 400 Hz B-499 35/200A 3PDT, Double Break, 115 VAC, 400 Hz/28 VDC NN-301 50 Amps SPDT w/Time Delay on Pickup, 115 VAC, 400 Hz BR-301AY 200 Amps 3PST N.O., 115/200 VAC, 400 Hz D-7GR 50 Amps 3PDT, 115/200 VAC, 400 Hz B-393P 200 Amps 3PDT, Center Off, 120/208 VAC, 50/60/400 Hz N-421A 50 Amps 3PST N.C., 115/200 VAC, 400 Hz B-345LS 225 Amps 3PDT, Center Off, 115/200 VAC, 400 Hz D-18F 50 Amps 3PDT, Center Off, 115/200 VAC, 400 Hz B-394 250 Amps 3PDT, 115/200 VAC, 400 Hz DR-18E-5 50 Amps 2SPST, Center Off, 115/208 VAC, 400 Hz BH-124AA 250 Amps 3PDT, Center Off, 115/200 VAC, 400 Hz B-227 60 Amps 3PDT, Center Off, 115/200 VAC, 400 Hz BH-360A 250 Amps 3PDT, 115/200 VAC, 400 Hz B-138S 60 Amps 3PST N.O., 115/200 VAC, 300-600 Hz B-430-1 275 Amps 3PST, Magnetic Latch, 115/200 VAC, 400 Hz DH-7BC 60 Amps 3PDT, 115/208 VAC, 400 Hz B-429A-1 300 Amps 3PST N.O., 115/200 VAC, 400 Hz BR-329BC 60 Amps 2PST N.O., 115 VAC, 60 Hz B-874L 335 Amps 3PST, 200 VAC, 400 Hz SA120B 60 Amps 3PDT, Side Stable, 115/200 VAC, 400 Hz B-429CA 350 Amps 3PST N.O., 120/208 VAC, 400 Hz NH-505 90 Amps 3PDT, Center Off, 115/200 VAC, 400 Hz B-479A-1 350 Amps 3PST, Magnetic Latch, 120/208 VAC, 400 Hz D-25BD 100 Amps 3PDT, 115/200 VAC, 400 Hz B-484 500 Amps 3PST, Magnetic Latch, 115/200 VAC, 400 Hz High Performance DC Contactors FEATURES: Side Stable Contactors • High reliability Latching Contactors • Meets requirements of Mil-R-6106 Center Off Contactors • Hermetic or gasket seal available • Repairable • Easily tailored to customer requirements P/N Current Rating Description P/N Current Rating Description A-837D 15/3A Latching Armature Relay, 28 VDC A-871F 200 Amps SPDT N.O. & N.C., 28 VDC C-28 25 Amps 2PST N.O., Latching, 40 VDC A-1077B 230 Amps SPDT, 28 VDC D-7TD 50 Amps 2SPST 1 N.O. 1 N.C., 28 VDC AH-965H 300 Amps SPDT N.O. & N.C., 28 VDC D-7AC 50 Amps 2SPST 1 N.O. 1 N.C., 28 VDC A-1019 300 Amps 2PDT, Center Off, 28 VDC DH-7KC-1 50 Amps 4PST 2 N.O. 1 N.C., 28 VDC A-876M 300 Amps SPDT N.C., 28 VDC N-208 50 Amps SPDT, Double Break, Magnetic Latch, 28 VDC K-300 300 Amps SPST N.O., 28 VDC NN-233C 60 Amps SPDT, Double Break, 28 VDC SD130A 400 Amps SPST N.O., Double Break, 28 VDC SD167A 100 Amps SPST, Side Stable, 28 VDC A-400B 400 Amps SPST N.O., 28 VDC D-32AB 100 Amps 2SPST, Center Off, Double Break, 28 VDC K-400 400 Amps SPST N.O., 28 VDC N-417E 100 Amps SPDT, Double Break, 28 VDC A-981S 400 Amps SPDT, 28 VDC A-885Y 100 Amps SPDT N.O. & N.C., 28 VDC AH-703F 400 Amps SPST N.O., 28 VDC NN-307 100 Amps SPST, Double Break, 28 VDC A-922F 600 Amps 2PST N.O., 28 VDC SDH128 100 Amps SPDT, Side Stable, 28 VDC A-712T 600 Amps SPST N.O., 28 VDC NN-449B 100 Amps SPDT, Double Break, 28 VDC A-931F 600 Amps SPST N.O., 28 VDC DH-16CH 131 Amps SPST, Latching, 31 VDC A-792ST 1000 Amps SPST N.O., 28 VDC A-1077F 200 Amps SPST N.O., 28 VDC A-882 1600 Amps SPST N.O., 28 VDC Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1407 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 HARTMAN High Performance AC/DC Contactors FEATURES: Side Stable Contactors • High reliability • Meets requirements of Mil-R-6106 • Hermetic or gasket seal available • Lightweight construction • Easily tailored to customer requirements P/N Current Rating Description P/N Current Rating Description C-8B 15 Amps 2PDT N.C., 28 VDC, 60 or 400 Hz D-14D 50 Amps 2SPST 1N.O. 1N.C., 28 VDC or 115 VAC, 400 Hz DH-7PF 50 Amps 4PST 2N.O. 2N.C., 28 VDC or 115 VAC, 400 Hz BH-316A 50 Amps 3PST, 28 VDC or 115 VAC, 400 Hz NN-233A 50 Amps SPDT, Double Break, 28 VDC or 115 VAC, 400 Hz C-21Y 60 Amps SPST N.O., Dbl. Break, 28 VDC or 115 VAC, 400 Hz DC Reverse Current Contactors FEATURES: Specialty Contactors • High reliability • Meets requirements of Mil-R-6106 • Gasket sealed • Repairable • Easily tailored to customer requirements P/N Current Rating Description P/N Current Rating Description A-718AAP 100 Amps SPST N.O., 28 VDC, Cutout Reverse Current A-701D 400 Amps SPST N.O., 28 VDC, Cutout Reverse Current A-700AQ-4 200 Amps SPST N.O., 28 VDC, Cutout Reverse Current A-702AAP 600 Amps SPST N.O., 28 VDC, Cutout Reverse Current A-700ZF 300 Amps SPST N.O., 28 VDC, Cutout Reverse Current A-791M 1000 Amps SPST N.O., 28 VDC, Cutout Reverse Current Sensors & Monitors FEATURES: Voltage & Current Sensors • High reliability Phase Rotation Sensors • Meets requirements of Mil-R-6106 Ground Power Monitors • Hermetic or gasket seal available Frequency Sensors • Lightweight construction units available • Epoxy encapsulated units available P/N Current Rating Description P/N Current Rating Description AVR-869C SPDT, 28 VDC, 3∅ Sequence Relay Q-50AC 0.3 Amp SPDT, 28 VDC, Encapsulated Current Indicator E-312P 5 Amps SPDT, 28 VDC, 400 Hz, Overvoltage Sensor CH-27 0.75 Amp 2PDT, 28 VDC, Current Sensor E-381 5 Amps SPDT, 130 VAC, 400 Hz, Undervoltage Sensor CH-26 1 Amp SPST, 28 VDC, Current Sensor E-308AA 7.5 Amps SPDT, 120 VDC, 60 Hz, 3∅ Undervoltage Sensor A-848KK 75 Amps 2PST, 28 VDC, Automatic Drop Out E-329E 10 Amps 3PDT, 115 VAC, Drop Out Time Delay A-772XTB 200 Amps SPST N.O., 28 VDC, Delayed Drop Out E-308AH 10 Amps 3PDT, 115 VAC, Drop Out Time Delay A-701P-1 400 Amps SPST N.O., 28 VDC, Remote Reset E-312A-1 10 Amps 2PDT, 440 VAC, 400 Hz, 3∅ Voltage Sensor A-701P-3 500 Amps SPST N.O., 28 VDC, Remote Reset E-348 0.25 Amp SPST N.O., 28 VDC, Overload Relay A-792CA 600 Amps 2PST N.O., 28 VDC, Automatic Drop Out E-308 3 Amps SPDT, 28 VDC, Adjustment Pick-Up Voltage E-326 1 Amp 115 VAC, 400 Hz, 3∅ Rotation Sensor AVR-834 3 Amps SPDT, 28 VDC, DC Voltage Sensor E-326A 1 Amp 115 VAC, 60 Hz, 3∅ Rotation Sensor E-311P 10 Amps 2PDT, 28 VDC, Drop Out Time Delay E-341 2 Amps SPDT, 208 VAC, 400 Hz, 3∅ Rotation Sensor QR-50AF 0.25 Amp SPST, 115 VAC, Encapsulated Current Indicator E-326E 5 Amps SPDT, 460 VAC, 60 Hz, 3∅ Rotation Sensor QR-50DA 0.25 Amp SPST, 115 VAC, Encapsulated Current Indicator E-145Z 25 Amps 2PST, 120/208 VAC, 400 Hz, Phase Loss Relay E-387 1 Amp SPDT, 115 VAC, 400 Hz, Current Sensor E-145Y 60 Amps 2PST, 120/208 VAC, 400 Hz, Phase Loss Relay E-145AK-4 5 Amps SPST, 115 VAC, 3∅ Current Sensor E-327AD 1 Amp 2PST, 115 VAC, Ground Power Monitor BE-500G-1 50 Amps 3PST N.O., 120 VAC, Overload Current Sensor E-384 3 Amps SPDT, 28 VDC, Under Frequency Sensor Q-50B 0.25 Amps SPDT, 28 VDC, Encapsulated Current Indicator Plug-In Contactors FEATURES: Side Stable Contactors • Fast installation/removal time Latching Contactors • Improved maintenance safety Center Off Contactors • High reliability • Meets requirements of Mil-R-6106 • Lightweight construction P/N Current Rating Description P/N Current Rating Description BP-353 50 Amps 3PST N.O., 115/200 VAC, 400 Hz BPE-494 175 Amps 3PST N.O., ELCU, 115/200 VAC, 400 Hz DP-25BD 100 Amps 3PDT, 115/200 VAC, 400 Hz BP-494 275 Amps 3PST N.O., 115/200 VAC, 400 Hz DP-31C 100 Amps 3PDT, Center Off, 115/200 VAC, 400 Hz BP-493-1 385 Amps 3PST, Magnetic Latch, 115/200 VAC, 400 Hz Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1408 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 HARTMAN DC Automatic Dropout Contactors FEATURES: DC Automatic Drop Out • High reliability Time Delay Relays • Meets requirements of Mil-R-6106 Phase Imbalance Sensors • Hermetic or gasket seal available Automatic Drop Out Contactors P/N Current Rating Description P/N Current Rating Description E-55 2 Amps 4PDT, 28 VDC, Time Delay A-757D 600 Amps SPST, 28 VDC, Automatic Dropout @ 180 Amps B-178 60 Amps 3PST, 120/208 VAC, 400 Hz, Phase Sensor AC & DC High Voltage Contactors FEATURES: High Voltage • High reliability AC Contactors • Meets requirements of Mil-R-6106 DC Contactors • Hermetic or gasket seal available Center Off Contactors • Lightweight construction units available Latching Contactors • Repairable P/N Current Rating Description P/N Current Rating Description CR-21A 5 Amps 3PST N.O., 440 VAC, 60 Hz or 380 VAC, 50 Hz B-459 250 Amps 3PDT, Center Off, 208 VAC, 400 Hz B-329P 20 Amps 3PST N.O., Dbl. Break, 260/450 VAC, 400 Hz B-460 250 Amps 6PST, 208 VAC, 400 Hz BR-393E 20 Amps 3PDT, Center Off, Dbl. Break, 380 VAC, 50 Hz B-461 250 Amps 3PDT, Center Off, 120/208 VAC, 400 Hz B-138DL 50 Amps 3PST N.O., 200 VAC, 400 Hz BH-125TH 250 Amps 3PST N.O., 208 VAC, 400 Hz B-140AA 60 Amps 3PDT, Center Off, 200 VAC, 400 Hz B-124GL 250 Amps 3PDT, Center Off, Dbl. Break, 208 VAC, 400 Hz B-138XAH 60 Amps 3PDT, 200 VAC, 400 Hz AV-875 60 Amps SPST N.O., 270 VDC B-312CS 100 Amps 3PST N.O., 380 VAC, 50 Hz A-751D-1 150 Amps SPST N.O., 110 VDC B-125N 150 Amps 3PST N.O., 208 VAC, 400 Hz A-754JD 150 Amps SPST N.O., 120 VDC B-493E 160 Amps 3PST, Magnetic Latch, 230 VAC, 400 Hz A-751YC 650 Amps SPST N.O., 340 VDC Space Contactors FEATURES: Space Relays • High reliability DC Latching Contactors • Meets requirements of Mil-R-6106 • Hermetically sealed • Lightweight construction • High shock, vibration, and acceleration levels P/N Current Rating Description P/N Current Rating Description N-409D 50 Amps 2PDT, Double Break, Magnetic Latch, 28 VDC N-208H 50 Amps SPDT, Double Break, Magnetic Latch, 40 VDC Power Distribution Systems FEATURES: Power Distribution Panels • Primary and secondary power distribution • Contactors/circuit breaker plug-in units Modular Units - Main power contactors • Power management capabilities Standard Panels - Secondary power contactors/relays • Value added - Current and voltage sensing • Space saving/weight saving designs - Logic/control signals • Custom designs for specific applications Modular Units Standard Panels • Utilizes plug-in line replaceable modules installed on a panel mounting system, or • Utilizes actuator and contact assemblies from discrete contactors, bussed back-plane. LRMs may be contactors, circuit breakers, sensing units, ELCUs, etc. together and packaged in one or more enclosures with external power and • Designed as a fault-free zone with no moving parts. Intended as a permanent control connections. installation on mother vehicle. • Optional current/voltage sensing, fuses, circuit breakers, power monitors, etc. FEATURES: FEATURES: • Weight savings over standard discrete components • Lightest power distribution approach • Value added • Value added • Ease of maintenance • Ease of maintenance • Reduced OEM labor • Reduced OEM labor These are just some of the HARTMAN products capabilities from Tyco Electronics: - Voltage, Current & Power Sensing - Phase Sequence, Unbalance & Failure - Turbine Starting - Over & Reverse Current - Impedance Relays - Trip-Free, Electrical & Mechanical - Over & Under Voltage - Ripple Detection Interlocking - Over & Under Frequency - Positive, Negative & Zero Sequence - Electrical & Magnetic Latching - Ground Fault & Detection Voltage - Polarization - Time Delay - Signal Amplification - Power Switching Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1409 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC High Voltage DC Relays & Contactors 28 Vdc 3.0 kV Aerospace Power Relays High Voltage Reed Relay Hi-Rel Satellite Relays Power Controllers P/N Series Carry Current Power Switching* RF Ratings Contact Form P/N Series Carry Current Power Switching* RF Ratings Contact Form AL50 50 amps Yes No SPST-NO S02DNA 2 amps Carry Only No SPST-NO AL90 90 amps Yes No SPST-NO AL150 150 amps Yes No SPST-NO AL350 350 amps Yes No SPST-NO 3.5 kV AL500 500 amps Yes No SPST-NO Vacuum Relays Gas Filled Relays 270 Vdc Aerospace Power Relays Hi-Rel Satellite Relays Power Controllers P/N Series Carry Current Power Switching* RF Ratings Contact Form HC-5 8 amps Make Only No SPDT P/N Series Carry Current Power Switching* RF Ratings Contact Form HC-3 15 amps Yes Yes SPDT AP5A 5 amps Yes No SPST-NO HC-1 25 amps Carry Only Yes SPDT AP5B 5 amps Yes No SPST-NC AP5C 5 amps Yes No SPDT AP5P 5 amps Yes No SPST-Latch 5.0 kV AP5R 5 amps Yes No SPDT-Latch High Voltage Reed Relays AP10A 10 amps Yes No SPST-NO Vacuum Relays AP10B 10 amps Yes No SPST-NC AP10P 10 amps Yes No SPST-Latch AP11A 10 amps Yes No SPST-NO AP44P 15 amps Yes No SPST-Latch P/N Series Carry Current Power Switching* RF Ratings Contact Form AP50X 50 amps Yes No SPST-NO S06FNA 6 amps Carry Only Yes SPST-NO AP90X 90 amps Yes No SPST-NO K41A 30 amps Yes Yes SPST-NO AP150X 150 amps Yes No SPST-NO K41B 30 amps Yes Yes SPST-NC AP265X 265 amps Yes No SPST-NO K41C 30 amps Yes Yes SPDT AP265P 265 amps Yes No SPST-NO K41P 25 amps Carry Only Yes SPST-Latch AP350X 500 amps Special No SPST-NO K41R 25 amps Carry Only Yes SPDT-Latch PD5A 5 amps Yes No SPST-NO K40P 35 amps Carry Only Yes SPST-Latch PD5B 5 amps Yes No SPST-NC PD10A 10 amps Yes No SPST-NO PD10B 10 amps Yes No SPST-NC PD10P 10 amps Yes No SPST-Latch 7.5 kV PD90X 90 amps Yes No SPST-NO Medical Relays Gas Filled Relays PD150X 150 amps Yes No SPST-NO 12-1800 Vdc Electric Vehicle Relays Specialty DC Power Relays and Contactors P/N Series Carry Current Power Switching* RF Ratings Contact Form Integrated Sensing KM-13 10 amps Make Only No DPDT KM-17 10 amps Make Only No DPDT P/N Series Carry Current Power Switching* RF Ratings Contact Form EV4 4 amps Make Only No SPST-NO EV200 200 amps Yes No SPST-NO EV250A 400 amps Yes No SPST-NO EV250B 400 amps Yes No SPST-NC 9 kV EV500 600 amps Yes No SPST-NO High Voltage Reed Relay 2.0 kV High Voltage Reed Relay P/N Series Carry Current Power Switching* RF Ratings Contact Form Vacuum Relay S06HBA 6 amps Carry Only Yes SPST-NO P/N Series Carry Current Power Switching* RF Ratings Contact Form S06CBA 6 amps Carry Only Yes SPST-NO K45C 15 amps Carry Only Yes SPDT * Consult Factory for Power Switching Level Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1410 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC High Voltage DC Relays & Contactors 8 kV 20 kV High Voltage Reed Relays Vacuum Relay Vacuum Relays Gas Filled Relays P/N Series Carry Current Power Switching* RF Ratings Contact Form P/N Series Carry Current Power Switching* RF Ratings Contact Form S06JNB 6 amps Carry Only Yes SPST-NC H-19 30 amps Special Yes DPDT HC-6 8 amps Make Only No SPDT 25 kV H-18 10 amps Yes Yes SPDT Vacuum Relays K47A 12 amps Yes Yes SPST-NO Gas Filled Relays K47B 12 amps Yes Yes SPST-NC HC-4 15 amps Yes No SPDT HC-2 25 amps No No SPDT P/N Series Carry Current Power Switching* RF Ratings Contact Form K44P 50 amps Yes Yes SPST-Latch KC-38 15 amps Make Only No SPST-NC K62A 18 amps Special No SPST-NO 10 kV K62B 18 amps Special No SPST-NC High Voltage Reed Relays K62C 18 amps Special No SPDT Vacuum Relays H-17 30 amps Special Yes SPDT KC-28 30 amps Make Only No SPST-NO KC-32 45 amps Special No SPST-NC P/N Series Carry Current Power Switching* RF Ratings Contact Form KC-30 55 amps Carry Only Yes SPST-NC S05LTA 5 amps Yes No SPST-NO KC-22 65 amps Special No SPST-NO S05LTB 5 amps Yes No SPST-NC KC-20 110 amps Carry Only Yes SPST-NO K81A 10 amps Special No SPST-NO K81B 10 amps Special No SPST-NC 30 kV K81C 10 amps Special No SPDT Vacuum Relays K43A 25 amps Special Yes SPST-NO K43B 25 amps Special Yes SPST-NC K43C 25 amps Special Yes SPDT P/N Series Carry Current Power Switching* RF Ratings Contact Form K43R 24 amps Carry Only Yes SPDT-Latch H-23 30 amps Carry Only Yes SPST-NC K43P 24 amps Carry Only Yes SPST-Latch H-24 30 amps Carry Only Yes SPST-NO 12 kV 35 kV Vacuum Relays Gas Filled Relays P/N Series Carry Current Power Switching* RF Ratings Contact Form P/N Series Carry Current Power Switching* RF Ratings Contact Form H-14 30 amps Carry Only Yes DPDT K61A 10 amps Make Only No SPST-NO H-16 30 amps Carry Only Yes DPDT K61B 10 amps Make Only No SPST-NC K61C 10 amps Make Only No SPDT 15 kV K60C 10 amps Make Only No SPDT High Voltage Reed Relays Vacuum Relays 50 kV Gas Filled Relays Vacuum Relays Gas Filled Relays P/N Series Carry Current Power Switching* RF Ratings Contact Form S05MTA 5 amps Carry Only No SPST-NO P/N Series Carry Current Power Switching* RF Ratings Contact Form KC-15 12 amps Make Only No SPDT K64C 10 amps Make Only No SPDT KC-16 12 amps Make Only No SPDT H-25 30 amps Special No SPDT KC-14 15 amps Yes No SPDT KC-18 15 amps Yes No SPDT 70 kV H-8 15 amps Yes No SPDT Gas Filled Relays KC-12 30 amps Yes Yes SPDT H-26 30 amps Carry Only Yes 4PDT KC-8 30 amps Yes Yes SPDT P/N Series Carry Current Power Switching* RF Ratings Contact Form KC-2 50 amps Carry Only Yes SPDT K70A 10 amps Make Only No SPST-NO KC-11 50 amps Carry Only Yes SPDT K70B 10 amps Make Only No SPST-NC K70C 10 amps Make Only No SPDT * Consult Factory for Power Switching Level Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1411 specified. Refer to inside back cover. Catalog 1308242 Issued 3-03 KILOVAC Protective Relays We offer a broad range of protective relays for use in portable generators, automatic transfer switches, irrigation pumps, industrial facilities, utilities, refineries, oil field, urban rapid transit systems, aircraft, ships and submarines. Some models are qualified by the military for use in ground support equipment, aircraft and Navy ships’ high shock applications. These are managed in the DOD supply system under NSN classes 5945 and 6110. KILOVAC protective relays were previously marketed under the WILMAR brand. Following is a just a partial listing of our protective relay offering: Voltage Sensitive WUV/WOV Series ........................Undervoltage & Overvoltage WUVT/WOVT Series ....................Undervoltage & Overvoltage with Time Delay WUV/WOV DC Series ................Undervoltage & Overvoltage DC WOUV DC Series ........................Over/Undervoltage DC WOUVT Series ............................Over/Undervoltage, Time Delay 250 Series ....................................Over/Undervoltage D100X Series................................Close Differential, 1 Phase D101X Series................................Series Close Differential, 3 Phase WD2759 Series ............................AC Over/Undervoltage Sensing Relay, DIN Rail Mounting Reverse Power 700 Series ....................................1 & 3 Phase 700 Series ....................................1 & 3 Phase, Adjustable Time Delay WD32 Series ................................Reverse Power Relay, DIN Rail Mounting Phase Failure 1000 Series ..................................Loss of Phase, Undervoltage Phase Sequence 900 Series ....................................Phase Sequence WD47 Series ................................ Phase Sequence Relay, DIN Rail Mounting Current Balance WCB Series ................................Current Balance Current Sensitive WC1 & WCT1 Series ..................Overcurrent, Time Delay, 1 Phase WC3 & WCT3 Series ..................Overcurrent, Time Delay, 3 Phase WD5051-3 Series ........................AC Over Current Sensing Relay, DIN Rail Mounting Current Differential WCD Series..................................Current Differential Paralleling 1800 Series ..................................Paralleling (volt) WSYN Series ..............................Voltage Frequency, Phase Angle WD25 Series ................................Paralleling Relay, DIN Rail Mounting Frequency Sensitive WOF & WUF Series ....................Overfrequency & Underfrequency WOUF Series ..............................Over/Underfrequency, Time Delay Option 25-000 Series ..............................Over/Underfrequency 20-000 Series ..............................Frequency, 56-66 Hz 20-050-19 Series ..........................Voltage/Frequency WD81OU Series ..........................Over/Under Frequency Relay, DIN Rail Mounting Ground Fault WGD Series..................................Power Factor & Ground Fault Detector WC1G Series................................Power Factor & Ground Fault Detector NOTE WD.. Series protective relays are described in section 13 of this databook. For details on other models, please visit our website at www.tycoelectronics.com. Dimensions are shown for Dimensions are in inches over Specifications and availability www.tycoelectronics.com reference purposes only. (millimeters) unless otherwise subject to change. Technical support: 1412 specified. Refer to inside back cover. Global Contacts Americas Argentina – Buenos Aires Canada – Markham Mexico – Mexico City For Latin/South American Phone: +54-11-4733-2200 Phone: +905-475-6222 Phone: +52-55-5-729-0425 Countries not shown Fax: +54-11-4733-2250 Fax: +905-474-5520 Fax: +52-55-5-398-1430 Phone: +57-1-240-9396 Product Information Center: Fax: +57-1-660-0206 Brasil – São Paulo (Technical Support) United States – Harrisburg, PA Phone: +55-11-3611-1311 Phone: +905-470-4425 Phone: +717-564-0100 Fax: +55-11-3611-0397 Fax: +905-474-5525 Fax: +717-986-7575 Product Information Center: Colombia – Bogota (Technical Support) Phone: +57-1-240-9396 Phone: +800-522-6752 Fax: +57-1-660-0206 Fax: +717-986-7575 Asia/Pacific Australia – Sydney Japan – Kawasaki, Kanagawa New Zealand – Auckland Singapore – Singapore Phone: +61-2-9840-8200 Phone: +81-44-844-8079 Phone: +64-9-634-4580 Phone: +65-4820-311 Fax: +61-2-9899-5649 Fax: +81-44-844-8733 Fax: +64-9-634-4586 Fax: +65-4821-012 Product Information Center: Product Information Center: Raychem Products (Technical Support) (Technical Support) Philippines – Makati City Phone: +65-4866-151 Phone: +61-2-9554-2600 Phone: +81-44-844-8013 Phone: +632-867-8641 Fax: +65-6545-514 Fax: +61-2-9502-2556 Fax: +81-44-812-3200 Fax: +632-867-8661 Raychem Products Taiwan – Taipei India – Bangalore Phone: +81-44-900-5102 People’s Republic of China Phone: +886-2-2664-9977 Phone: +91-80-841-0200 Fax: +81-44-5025-5027 Hong Kong Fax: +886-2-2664-9900 Fax: +91-80-841-0210 Phone: +852-2735-1628 Korea – Seoul Fax: +852-2735-0243 Thailand – Bangkok Indonesia – Jakarta Phone: +82-2-3274-0535 Phone: +66-2-955-0500 Phone: +6221-526-7852 Fax: +82-2-3274-0524/0531 Shanghai Fax: +66-2-955-0505 Fax: +6221-526-7856 Phone: +86-21-6485-0602 Malaysia – Selangor Fax: +86-21-6485-0728 Vietnam – Ho Chi Minh City Phone: +60-3-7053055 Phone: +84-8-8232-546/7 Fax: +60-3-7053066 Shunde Fax: +84-8-8221-443 Phone: +86-765-775-1368 Fax: +86-765-775-2823 Europe/Middle East/Africa Austria – Vienna Germany – Bensheim Italy – Collegno (Torino) Spain – Barcelona Phone: +43-190-560-0 Phone: +49-6251-133-0 Phone: +39-011-4012-111 Phone: +34-93-291-0330 Fax: +43-190-560-1333 Fax: +49-6251-133-1600 Fax: +39-011-4031-116 Fax: +34-93-201-7879 Product Information Center: Product Information Center: (Technical Support) Lithuania – Vilnius (Technical Support): Belgium – Kessel-Lo Phone: +49-6251-133-1999 Phone: +370-5-21-31-402 Phone: +34-93-291-0330 Phone: +32-16-352-300 Fax: +49-6251-133-1988 Fax: +370-5-21-31-403 Fax: +34-93-200-3779 Fax: +32-16-352-352 Netherlands – ’s-Hertogenbosch Sweden – Upplands Väsby Germany – Langen Bulgaria – Sofia Phone: +31-73-6246-246 Phone: +46-8-50-72-50-00 Phone: +49-6103-709-0 Phone: +359-2-971-2152 Fax: +31-73-6212-365 Fax: +46-8-50-72-50-01 Fax: +49-6103-709-1223 Fax: +359-2-971-2153 Product Information Center: (Technical Support) Switzerland – Steinach Germany – Speyer Phone: +31-73-6246-999 Czech Republic – Kurim Phone: +41-71-447-0447 Phone: +49-6232-30-0 Fax: +31-73-6246-998 Phone: +420-5-41-162-111 Fax: +41-71-447-0444 Fax: +49-6232-30-2243 Fax: +420-5-41-162-223 Norway – Nesbru Phone: +47-66-77-88-99 Germany Turkey – Istanbul Denmark – Viby J Fax: +47-66-77-88-55 HTS Division – Neunkirchen Phone: +90-212-281-8181…3 Phone: +45-70-15-52-00 Phone: +49-2247-305-0 +90-212-282-5130/5430 Fax: +45-86-29-51-33 Poland – Warsaw Fax: +49-2247-305-122 Fax: +90-212-281-8184 Phone: +48-22-5490-888 Fax: +48-22-5490-880 Egypt – Cairo Ukraine – Kiev Great Britain – Phone: +20-2-417-76-47 Phone: +38-044-238-6908 Stanmore Middlesex Romania – Bucharest Fax: +20-2-419-23-34 Fax: +38-044-568-5740 Phone: +44-181-954-2356 Phone: +40-1-311-3479+3596 Fax: +44-181-954-6234 Fax: +40-1-312-0574 Estonia – Tallinn Product Information Center: Phone: +372-65-05-474 (Technical Support) Russia – Moscow Fax: +372-65-05-470 Freephone GB: 0800-267-666 Phone: +7-095-926-55-06…09 Phone: +44-141 810 8967…69 Fax: +7-095-926-55-05 Finland – Helsinki Fax: +44-141 810 8971 Russia – St. Petersburg Phone: +358-95-12-34-20 Great Britain – Dorcan, Swindon Phone: +7-812-325-30-83 Fax: +358-95-12-34-250 Raychem Products Fax: +7-812-325-32-88 Phone: +44-1793-528171 Fax: +44-1793-572516 France – Scotland – Dundee Cergy-Pontoise Madison Cable Products Phone: +33-1-3420-8888 Greece – Athens Phone: +44-1382-508080 Fax: +33-1-3420-8600 Phone: +30-1-9370-396/397 Fax: +44-1382-505060 Product Information Center: Fax: +30-1-9370-655 (Technical Support) Phone: +33-1-3420-8943 Hungary – Budapest Slovakia – Banská Bystrica Fax: +33-1-3420-8623 Phone: +36-1-289-1000 Phone: +421-48-415-20-11/12 Fax: +36-1-289-1010 Fax: +421-48-415-20-13 France Tyco Electronics Export – Ireland – Dublin Slovenia – Ljubljana St Ouen L’Aumone Phone: +353-1-820-3000 Phone: +386-1561-3270 Phone: +33-1-3440-7200 Fax: +353-1-820-9790 Fax: +386-1561-3240 Fax: +33-1-3440-7220 or Israel – Yokneam +33-1-3440-7230 South Africa – Port Elizabeth Phone: +972-4-959-0508 Phone: +27-41-405-4500 Fax: +972-4-959-0506 Fax: +27-41-486-1314 1308242–35M–GIC–CAD–3-03 Tyco Electronics Corporation Printed in the U.S.A. www.tycoelectronics.com Catalog 1308242 Revised 3-03 Relays, Contactors, Timers, Transformers and Circuit Breakers For General Purpose Applications Relays, Contactors, Timers, AGASTAT TYCO ELECTRONICS CORPORATION WWW.TYCOELECTRONICS.COM Transformers and Circuit Breakers AXICOM For General Purpose Applications Catalog 1308242 Revised 3-03 KILOVAC OEG P&B PRODUCTS UNLIMITED SCHRACK