General Purpose Relays PCB Relays OEG Miniature PCB Relay PCH n 5 to 10A rating n 1 form A (NO) and 1 form C (CO) contact arrangements n Sensitive coil available for 1 form A type Typical applications Appliances, HVAC, refrigerators, microwave ovens F_PCH_B VZ Approvals Coil Data (continued) VDE 119568, UL E82292, CQC08001023449 Technical data of approved types on request Coil versions, DC coil Coil Rated Operate Release Coil Rated coil Contact Data code voltage voltage voltage resistance power Contact arrangement 1 Form A (NO) VDC VDC VDC Ω±10 % mW Rated voltage 30VDC, 277VAC Sensitive type (for form A type only) Max. switching voltage 30VDC, 277VAC 003 3 2.25 0.15 45 200 Rated current 5 to 10A 005 5 3.75 0.25 125 200 Contact material AgSnO 006 6 4.50 0.30 180 200 2 Min. recommended contact load 100mA, 5VDC 009 9 6.75 0.45 405 200 Frequency of operation 360 ops./h 012 12 9.00 0.60 720 200 Operate/release time max. 10/5ms 018 18 13.50 0.90 1620 200 Electrical endurance 024 24 18.00 1.20 2880 200 3 D type: 5A, 277VAC resistive, -30°C to +70°C100x10 ops. 048 48 36.00 2.40 11520 200 3 All figures are given for coil without pre-energization, at ambient temperature +23°C. L type: 5A, 277VAC resistive, -30°C to +70°C 30x10 ops. 3 D/L-WG type: 5A, 250VAC resistive, -40°C to +85°C 100x10 ops. Coil versions, DC coil Coil Rated Operate Release Coil Rated coil Contact ratings code voltage voltage voltage resistance power Type Contact Load Cycles VDC VDC VDC Ω±10 % mW IEC 61810 Standard type 3 PCH-..2M-WG A (NO) 5A 250VAC res, 85°C 100x10 003 3 2.10 0.15 23 400 3 PCH-..D2-WG A of C 5A 250VAC res, 85°C 100x10 005 5 3.50 0.25 63 400 3 PCH-..D2M A (NO) 5A 250VAC res, 70°C 100x10 006 6 4.20 0.30 90 400 3 PCH-..L2M A (NO) 5A 250VAC res, 70°C 30x10 009 9 6.30 0.45 202 400 3 PCH-..D2 C (CO) 5A/3A 250VAC res, 40°C 30x10 012 12 8.40 0.60 360 400 UL 508 018 18 12.60 0.90 810 400 3 PCH A (NO) 10A 125VAC res, 85°C 100x10 024 24 16.80 1.20 1440 400 3 PCH A (NO) 5A 250VAC general use, 85°C 100x10 048 48 33.60 2.40 5760 400 Reference Data Reference Data All figures are given for coil without pre-energization, at ambient temperature +23°C. 6 Mechanical endurance, DC coil 10x10 operations Coil Data Coil voltage range 3 to 48VDC Operative range, IEC 61810 2 Coil insulation system according UL Class F *Above reference data is apply for 1 Form C / NO contact side, rated voltage: 277Vac / Coil power: 400mW. *Above reference data is apply for 1 Form C / NO contact side, rated voltage: 277Vac / Coil power: 400mW. *Please contact with us about the graph of expected electrical life. *Please contact with us about the graph of expected electrical life. 1 12-2015, Rev. 1215 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions © Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B © Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445] TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445] This document is subject to change, Please call local TYCO Electronics for the latest version. This document is subject to change, Please call local TYCO Electronics for the latest version. Ordering Information for Relays General Purpose Relays PCB Relays OEG Example Part No. PCH -1 12 D 2 M H ,000 1. Basic Series PCH = Compact PCB mount type Miniature PCB Relay PCH (Continued) Ordering Information for Relays 2. Poles 1 = 1pole 3. Coil Voltage 05 = 5VDC 12= 12VDC Ord ering I nforma tion for Re lays Example Part No. Insulation Data PCH -1 12 D 2 M H ,000 06 = 6VDC 24 = 24VDC Initial dielectric strength 1. Basic Series 09 = 9VDC 48 = 48VDC* between open contacts 750V PCH = Compact PCB mount type rms Ordering Information for Relays 4. Coil Power 2. Poles between contact and coil 4000V rms Example Part No. D = 400mW (1a,1c) PCH -1 12 D 2 M H ,000 1 = 1pole Initial surge withstand voltage L = 200mW (1a) 3. Coil Voltage 1. Basic Series between contact and coil 10000V rms 05 = 5VDC 12= 12VD 5. C C ontac t Materi al PCH = Compact PCB mount E t xamp ype le Part No. Clearance/creepage PCH -1 12 D 2 M H ,000 06 = 6VDC 24 = 24VDC 2 = AgSnO 2 2. Poles between contact and coil NO: ≥ 4.9mm / 6.6mm 1. Basic Series 09 = 9VDC 48 = 48VDC* 6. Contact Arrangement 1 = 1pole between contact and coil CO: ≥ 4mm / 5mm PCH = Compact PCB mount type 4. Coil Power blank = 1c 3. Coil Voltage Tracking index of relay base 2. Poles D = 400mW (1a,1c) M = 1a 05 = 5VDC 12= 12VDC standard type PTI 175 L = 200mW (1a) 1 = 1pole 7. Enclosure 06 = 6VDC 24 = 24VDC WG txype PTI 250 5. Contact Material 3. Coil Voltage blank = Flux Proof 09 = 9VDC 48 = 48VDC* 2 = AgSnO 2 05 = 5VDC 12= 12VDC H = Wash Tight 4. Coil Power 6. Contact Arrangement 06 = 6VDC 24 = 24VDC 8. Suffix blank = 1c D = 400mW (1a,1c) Other Data 09 = 9VDC 48 = 48VDC* ,000 = Standard model M = 1a Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content L = 200mW (1a) 4. Coil Power 7. Enclosure Other refer to the Product Compliance Support Center at 5. Contact Material D = 400mW (1a,1c) blank = Flux Proof Suffix = Custom model www.te.com/customersupport/rohssupportcenter 2 = AgSnO 2 L = 200mW (1a) H = Wash Tight Ambient temperature -40°C to +85°C 6. Contact Arrangement 5. Contact Material 8. Suffix *Coil voltage: 48VDC only can chose 400mW type. Category of environmental protection blank = 1c ,000 = Standard model 2 = AgSnO 2 IEC 61810 RTII - flux tight M = 1a Other 6. Contact Arrangement RTIII - wash tight Terminal assignment 7. Enclosure Suffix = Custom model blank = 1c Shock resistance (functional) 10g Bottom view on solder pins blank = Flux Proof M = 1a Wiring Diagram (Bottom View) Outline Dimensions (mm) *Coil voltage: 48VDC only can chose 400mW type. Shock resistance (destructive) 100g H = Wash Tight 7. Enclosure 1c 1a 1c* Weight 7g 1 form C (CO) 1 form A (NO) 8. Suffix blank = Flux Proof Resistance to soldering heat THT ,000 = Standard model H = Wash Tight IEC 60068-2-20 RTII: 270°C/10s Other Wiring Diagram (Bottom View) 8. Suffix Outline Dimensions (mm) RTIII: 260°C/5s Suffix = Custom model 1c 1a ,000 = Standard model 1c* Packaging unit tray/100 pcs., carton box/1000 pcs. Other *Coil voltage: 48VDC only can chose 400mW type. Suffix = Custom model *Coil voltage: 48VDC only can chose 400mW type. Wiring Diagram (Bottom View) Outline Dimensions (mm) PC Board Layout (mm) (Bottom View) 1c 1a 1c* 1c Wiring Diagram (Bottom View) Outline Dimensions (mm) PCB layout Dimensions PC Board Layout (mm) (Bottom View) 1c 1a 1c* Bottom view on solder pins 1c 1 form C (CO) PC Board Layout (mm) (Bottom View) 1c PC Board Layout (mm) (Bottom View) 1a 1c 1 form A (NO) 1a *1a Outline dimensions is omitted. *1a Outline dimensions is omitted. Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm 1a *1a Outline dimensions is omitted. 1a *1a Outline dimensions is omitted. Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm Tolerance: 0.99mm Max.: +/-0.1mm, 1-2.99mm: +/-0.2mm, 3mm Min.: +/-0.3mm © Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B © Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445] TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445] This document is subject to change, Please call local TYCO Electronics for the latest version. This document is subject to change, Please call local TYCO Electronics for the latest version. 2 12-2015, Rev. 1215 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions © Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445] This document is subject to change, Please call local TYCO Electronics for the latest version. © Copyright 2009 by Tyco Electronics Japan G.K. All rights reserved. Edition: 1/2010 REV.B TYCO Electronics Japan G.K. [3-5-8, Hisamoto Takatsu-ku Kawasaki, 213-8535, Japan, TEL: 81 44 844 8445] This document is subject to change, Please call local TYCO Electronics for the latest version. General Purpose Relays PCB Relays OEG Miniature PCB Relay PCH (Continued) Product code structure Typical product code PCH -1 12 D 2 H ,000 Type PCH Miniature PCB Relay PCH Number of poles 1 1 pole Coil voltage Coil code: please refer to coil versions table (e.g. 05=5VDC) Coil sensitivity D Standard 400mW L 200mW (for 1 form A contact only) Contact material 2 AgSnO Contact arrangement Blank 1 form C (CO) contact M 1 form A (NO) contact Category of protection Blank Flux proof, vented cover H Wash tight, sealed plastic cover Insulation system designation Blank Class F system WG Class F system and for domestic appliances (IEC 60335-1, 4 Edition); Suffix ,000 Standard type Other types on request Product code Coil Sensitivity Cont.material Arrangement Enclosure Insulation Part number PCH-105D2H,000 5VDC Standard AgSnO 1 form C (CO) Wash tight Class F 9-1440003-0 2 PCH-105L2M,000 Sensitive 1 form A (NO) Flux proof 1461352-2 PCH-105L2MH,000 Wash tight 1461353-2 PCH-105L2M-WG Flux proof Cl. F, IEC 60335-1 1721768-2 PCH-106D2,000 6VDC Standard 1 form C (CO) Class F 9-1440003-8 PCH-109D2H,000 9VDC Wash tight 9-1440003-2 PCH-112D2,000 12VDC Flux proof 1440004 PCH-112D2H,000 Wash tight 9-1440003-3 PCH-112D2M,000 1 form A (NO) Flux proof 1461350-5 PCH-112D2M-WG Cl. F, IEC 60335-1 1721767-5 PCH-112D2-WG 1 form C (CO) 1721766-5 PCH-112L2M,000 Sensitive 1 form A (NO) Class F 1461352-5 PCH-112L2MH,000 Wash tight 1461353-5 PCH-112L2M-WG Flux proof Cl. F, IEC 60335-1 1721768-5 PCH-124D2,000 24VDC Standard 1 form C (CO) Class F 1440004-1 PCH-124D2H,000 Wash tight 9-1440003-5 PCH-124D2M,000 1 form A (NO) Flux proof 1461350-6 PCH-124D2MH,000 Wash tight 1461351-6 PCH-124L2M,000 Sensitive Flux proof 1461352-6 PCH-124L2MH,000 Wash tight 1461353-6 PCH-124L2M-WG Flux proof Cl. F, IEC 60335-1 1721768-6 PCH-148D2,000 48VDC Standard 1 form C (CO) Class F 1461410-2 3 12-2015, Rev. 1215 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions