RoHS Ready Products for Mobile Equipment TYCO ELECTRONICS “TECHNOLOGY PORTFOLIO” ● Connector Systems / ● Antennas, GPS Antennas, ● Battery Connectors & Electromechanical Components Integrated Antenna Systems Assemblies ● Relays ● Circuit Protection Devices ● Heat Sinks & Thermal Solutions ● Wireless Products ● Tubing & Harnessing Products ● Switches and Knobs ● Sensors ● Touch Screen Displays ● Identification Labeling Products ● Fiber Optic Products ● Power Systems ● Racks & Panels ● Wire & Cable ● Electronic Modules ● Smart Cards / Leadframes ● Application Tooling ● Resistors & Inductors TYCO ELECTRONICS “AT YOUR SERVICE” Tyco Electronics Online The Tyco Electronics website is an innovative and @ interactive source for application information, product updates and technical solutions. Our step-by-step software makes our website intuitive and user-friendly to better serve you! Please contact us at: www.tycoelectronics.com Internet Homepage Product Information Center www.tycoelectronics.com (PIC) You can rely on Tyco Electronics PIC Team to Electronic Internet Catalog provide you support for answers to your www.catalog.tycoelectronics.com general information or technical questions in an efficient and effective manner. To reach our PIC staff, please contact your local Tyco Electronics organization. Product Literature For more information about Tyco Electronics and its wide range of products we offer you a variety of literature such as product catalogs and a lot of product specific brochures. For catalogs and product brochures please contact your local Tyco Electronics organization. 1 All specifications subject to change. Consult Tyco Electronics for latest specifications. 2 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Introduction Tyco Electronics supplies a unique expertise for today’s and tomorrow’s mobile equipment applications, including cellular phones, mobile media players, digital camera’s, GPS, payment terminals and other portable electronics. We also provide high-level analyses and simulation services to allow OEMs to predict system performance, resulting in faster design cycles and lower costs. In addition our early involvement programs allow us to design next-generation products to support equipment requiring more speed, higher density and lower costs. Our wide product portfolio for mobile equipment ranges from a variety of connectors (SIM, I/O, Battery, Camera, LCD, Board-to-Board, FPC etc.) to battery packs, antennas circuit protection, cable assemblies and others. In addition to that Tyco Electronics offers a set of technologies especially developed to offer low applied cost products to our customers in example MID technology (Molded Interconnection Device). We have several dedicated Mobile Equipment engineering teams to provide you with the best service from persons which understand the way you are doing business. The teams are dedicated to your success and are located in several regions of the world. These regions are fully equipped with all necessary services such as quick turn sample shop, simulation equipment, test laboratories and others. Our standard offering is broad and reflected in this catalog. Therefore we are pleased to introduce you to our portfolio for mobile equipment. 10 Reasons to Choose Tyco Electronics for Mobile Equipment Applications 1. Tyco Electronics is committed to customer success! 2. Wide range of products applicable for mobile equipment. 3. Global Sales, Logistics, Development and manufacturing teams in all regions of the world. 4. The most innovative connector company in the industry. 5. Low cost manufacturing locations around the globe. 6. Working with 8 of the top 10 OEM’s. 7. Dedicated development teams for mobile equipment. 8. Wide range of (patented) technologies which enable reduction of applied cost. 9. Organization adopted to working with mobile equipment OEM’s and ODM’s. 10. Our commitment is your advantage. All specifications subject to change. Consult Tyco Electronics for latest specifications. 3 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Restriction on the Use of Hazardous Substances (RoHS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Connectors Generic SIM Connector, 6 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Generic SIM Connector, 8 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 5-Directional SIM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Scaleable SIM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Super Low Profile SIM Connector with Full Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Mini UICC SIM Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Sliding SIM Connector, 8 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 0.4 mm Pitch 1.0 mm or 1.5 mm Height Board-to-Board Connector . . . . . . . . . . . . . . . . 14 0.3 mm FPC Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Circular Audio Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Circular DC Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Mini USB Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Mini USB Receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Micro USB Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Generic Snake and Pad Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Multi Media Interface Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 MDIC and S-MDIC Connector System, 12 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 HDMI Connectors, Type C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Memory Card Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Micro SD Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Micro SD/SIM Combi Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Micro SD Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Spring Probe Connector (SPC), 1 Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Spring Fingers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 LCD ITO Connector, 8 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 LCD Connector 0.65 mm, 10 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Standard Switching Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Standard Switching Coax Test Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Standard Switching Coax Right-Angle Cable Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Standard Switching Coax with ESD Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 MID Micro Switching Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 MID Nano Switching Coax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Spring Probe Connector (SPC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Generic Battery Connector, 2 Positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 1.6 mm Pitch Low Profile Battery Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Right-Angle Leaf Spring Battery Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Battery Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Inboard SMIA 85 Camera Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Onboard SMIA 85 Camera Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Super Low Profile (SLP) Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Micro SLP Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 STAX™ LD Elastomeric Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 STAX™ Array Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Elastiboot™ Connectors for Microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 STAX™ Elastomeric Connectors for COG LCDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 SMT-ETI-1 STAX™ Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 STAX™ Coax Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Vibration Motor Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 4 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Table of Contents (continued) Antenna Products Antenna Manufacturing Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 RF Engineering Capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 MID Technology MID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Cable Products USB Data Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Music Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Charger Cable Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Mobile Phone Headset Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Bluetooth Hands-Free Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 High-Speed Micro-Coax Cable Assembly (MCC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Batteries Battery Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Mechatronic Center Niefern Technology Portfolio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 LAMFRAME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Mini SIM Card Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 M/A-COM Antenna Products GaAs SP6T 2.5 V Power Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Raychem Circuit Protection Products Lithium Cells and Battery Packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Rechargeable Battery Pack Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 Portable Electronics Input Port Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 HDMI: LCD, Plasma, HDTV, Set-Top Box, DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 Strap Battery Devices – VLR Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81 Strap Battery Devices – VLP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Strap Battery Devices – VTP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 Strap Battery Devices – LTP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Strap Battery Devices – LR4 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Strap Battery Devices – SRP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Surface-Mount Devices – nanoSMDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Surface-Mount Devices – microSMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Surface-Mount Devices – miniSMDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Surface-Mount Devices – miniSMDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Fast Acting Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Slow Blow Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 ESD Protection Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 Switches FSM 6 x 6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 FSMCT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 FSM 3.4 x 6 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97 FSM 0.5 mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 Turtle Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99 CoinKey™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Labels MP Metalized Polyester Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 ® Kapton Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 WP White Polyester Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Restriction on the Use of Hazardous Substances (RoHS) At Tyco Electronics, we’re ready to support your RoHS requirements. We’ve assessed more Restriction on the Use than 1.5 million end items/components for RoHS compliance, and issued new part numbers of Hazardous Substances where any change was required to eliminate the restricted materials. Part numbers in this catalog (RoHS) are identified as: RoHS Compliant Part numbers in this catalog are RoHS Compliant, unless marked otherwise. These products comply with European Union Directive 2002/95/EC as amended 1 January 2006 that restricts the use of lead, mercury, cadmium, hexavalent chromium, PBB, and PBDE in certain electrical and electronic products sold into the EU as of 1 July 2006. Note: For purposes of this Catalog, included within the definition of RoHS Compliant are products that are clearly “Out of Scope” of the RoHS Directive such as hand tools and other non-electrical accessories. Non-RoHS Compliant These part numbers are identified with a “�” symbol. These products do not comply with the material restrictions of the European Union Directive 2002/95/EC. 5 of 6 Compliant A “�” symbol identifies these part numbers. These products do not fully comply with the European Union Directive 2002/95/EC because they contain lead in solderable interfaces (they do not contain any of the other five restricted substances above allowable limits). However, these prod- ucts may be suitable for use in RoHS applications where there is an application-based exception for lead in solders, such as the server, storage, or networking infrastructure exemption. Note: Information regarding RoHS compliance is provided based on reasonable inquiry of our suppliers and represents our current actual knowledge based on the information provided by our suppliers. This information is subject to change. For latest compliance status, refer to our website referenced below. Getting the Information You Need Our comprehensive on-line RoHS Customer Support Center provides a forum to answer your questions and support your RoHS needs. A RoHS FAQ (Frequently Asked Questions) is available with links to more detailed information. You can also submit RoHS questions and receive a response within 24 hours during a normal work week. The Support Center also provides: ■ Cross-Reference from Non-compliant to Compliant Products ■ Ability to browse RoHS Compliant Products in our on-line catalog: RoHS http://ecommas.tycoelectronics.com/commerce/alt/RohsAltHome.do Customer ■ Downloadable Technical Data Customer Information Presentation Support ■ More detailed information regarding the definitions used above Center So whatever your questions when it comes to RoHS, we’ve got the answers at www.tycoelectronics.com/leadfree 6 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Generic SIM Connector, 6 Positions Generic SIM Connector, 6 Positions Features SIM (Security Identity Module) and UIM (Universal Identity Modules) cards have been and continue to be used in mobile equipment. Tyco Electronics offers a wide selection of low cost SMT SIM connectors with heights from 1.9 mm to 4.0 mm depending on your height requirements. Several variations have been tooled with and without ribs or positive stop (contact retention feature). This product works with SIM cards of Generation 1, 2 and 3. 2.54 All variations are packaged in Dim. B 7.5 8.5 tape & reel for pick and place 2.54 manufacturing. 2.54 1.5 Ribs 11.7 Material and Finish 1.0 2.54 Insulator: 1.7 LCP, glass-filled, black color Height Contact Pin: PCB Layout Phosphor bronze 7.0 Contact Plating: Selectively gold over nickel plated Part Numbers Package Height Quantity without Contact Retention with Contact Retention (mm) (Pieces Documentation per Reel) with Ribs without Ribs with Ribs without Ribs Drawing: 1.9 1-338063-9 1-1377227-9 1-1483288-9 1-1483437-9 1400 C-338063 2.0 2-338063-0 2-1377227-0 2-1483288-0 2-1483437-0 1400 Product Specification: 2.1 2-338063-1 2-1377227-1 2-1483288-1 2-1483437-1 1400 108-19122 2.2 2-338063-2 2-1377227-2 2-1483288-2 2-1483437-2 1400 Test Report: 2.3 2-338063-3 2-1377227-3 2-1483288-3 2-1483437-3 1400 501-19011 2.4 2-338063-4 2-1377227-4 2-1483288-4 2-1483437-4 1400 Application Specification: 2.5 2-338063-5 2-1377227-5 2-1483288-5 2-1483437-5 1400 114-19054 2.6 2-338063-6 2-1377227-6 2-1483288-6 2-1483437-6 1400 2.7 2-338063-7 2-1377227-7 2-1483288-7 2-1483437-7 1400 2.8 2-338063-8 2-1377227-8 2-1483288-8 2-1483437-8 1140 2.9 2-338063-9 2-1377227-9 2-1483288-9 2-1483437-9 1140 3.0 3-338063-0 3-1377227-0 3-1483288-0 3-1483437-0 1140 3.1 3-338063-1 3-1377227-1 3-1483288-1 3-1483437-1 1140 3.2 3-338063-2 3-1377227-2 3-1483288-2 3-1483437-2 1140 3.3 3-338063-3 3-1377227-3 3-1483288-3 3-1483437-3 1140 3.4 3-338063-4 3-1377227-4 3-1483288-4 3-1483437-4 1140 3.5 3-338063-5 3-1377227-5 3-1483288-5 3-1483437-5 1140 3.6 3-338063-6 3-1377227-6 3-1483288-6 3-1483437-6 1140 3.7 3-338063-7 3-1377227-7 3-1483288-7 3-1483437-7 1140 3.8 3-338063-8 3-1377227-8 3-1483288-8 3-1483437-8 1140 3.9 3-338063-9 3-1377227-9 3-1483288-9 3-1483437-9 1140 4.0 4-338063-0 4-1377227-0 4-1483288-0 4-1483437-0 1140 Bold Part Numbers are tooled All specifications subject to change. Consult Tyco Electronics for latest specifications. 7 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Generic SIM Connector, 8 Positions Generic SIM Connector, 8 Positions Features SIM (Security Identity Module) and UIM (Universal Identity Modules) cards have been and continue to be used in mobile equipment. Tyco Electronics offers a wide selection of low cost SMT SIM connectors with heights from 1.9 mm to 4.0 mm depending on your height requirements. All variations are packaged in tape & reel for pick and place manufacturing. 2.54 Material and Finish Insulator: 10.1 7.62 max. LCP, glass-filled, black color Contact Pin: Phosphor bronze Contact Plating: Selectively gold over nickel plated Documentation 11.7 Drawing: Dim. B C-338123 2.54 Product Specification: 108-19122 1.9 Height Test Report: 7.62 501-19011 Application Specification: 7.0 114-19054 1.5 11.95 max. 1.7 PCB Layout Package Package Height Part Height Part Quantity Quantity (mm) Number (mm) Number (Pieces/Reel) (Pieces/Reel) 1.9 1-338123-9 1100 3.0 3-338123-0 890 2.0 2-338123-0 1100 3.1 3-338123-1 890 2.1 2-338123-1 1100 3.2 3-338123-2 890 2.2 2-338123-2 1100 3.3 3-338123-3 890 2.3 2-338123-3 1100 3.4 3-338123-4 890 2.4 2-338123-4 1100 3.5 3-338123-5 890 2.5 2-338123-5 1100 3.6 3-338123-6 890 2.6 2-338123-6 1100 3.7 3-338123-7 890 2.7 2-338123-7 1100 3.8 3-338123-8 890 2.8 2-338123-8 1100 3.9 3-338123-9 890 2.9 2-338123-9 890 4.0 4-338123-0 890 Bold Part Number is tooled 8 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors 5-Directional SIM Connector 5-Directional SIM Connector Features Can be mated from 5 directions, left, right, front, back and top. The completely deep drawn contact nose provides smooth insertion and minimal card wear under any condition. Height range from 1.5 mm to 5.0 mm possible, while maintain- ing 0.5 mm contact deflection (GSM Specification). This product works with SIM cards of Generation 1, 2 and 3. 7.6 Material and Finish Insulator: 10.0 Dim. B GF liquid crystal polymer, black color Contact Pin: Copper alloy 2.54 Contact Plating: 1.2 µm nickel underlayer, 1.0 2.54 1.25 µm gold at card side, 2.54 2.54 0.1–0.2 µm gold at solder side Documentation 2.0 0.1 Dim. A Drawing: C-1705300 PCB Layout 0.5 Product Specification: 108-19280 Test Report: Package Package Dimensions (mm) Dimensions (mm) Part Part Quantity Quantity 501-19095 Number Number AB AB (Pieces/Reel) (Pieces/Reel) Application Specification: 1.5 7.7 1-1705300-5 1450 3.3 7.3 3-1705300-3 1450 114-19092 1.6 7.7 1-1705300-6 1450 3.4 6.7 3-1705300-4 1450 1.7 7.7 1-1705300-7 1450 3.5 7.6 3-1705300-5 950 1.8 7.6 1-1705300-8 1450 3.6 7.1 3-1705300-6 950 1.9 7.6 1-1705300-9 1450 3.7 7.6 3-1705300-7 950 2.0 7.5 2-1705300-0 1450 3.8 7.1 3-1705300-8 950 2.1 7.3 2-1705300-1 1450 3.9 7.5 3-1705300-9 950 2.2 7.2 2-1705300-2 1450 4.0 6.8 4-1705300-0 950 2.3 7.0 2-1705300-3 1450 4.1 7.5 4-1705300-1 950 2.4 6.7 2-1705300-4 1450 4.2 6.8 4-1705300-2 950 2.5 7.7 2-1705300-5 1150 4.3 7.6 4-1705300-3 950 2.6 7.5 2-1705300-6 1150 4.4 6.8 4-1705300-4 950 2.7 7.2 2-1705300-7 1150 4.5 7.7 4-1705300-5 800 2.8 6.9 2-1705300-8 1150 4.6 6.9 4-1705300-6 800 2.9 7.7 2-1705300-9 1150 4.7 7.6 4-1705300-7 800 3.0 7.4 3-1705300-0 1150 4.8 6.6 4-1705300-8 800 3.1 7.0 3-1705300-1 1150 4.9 7.6 4-1705300-9 800 3.2 7.7 3-1705300-2 1150 5.0 6.6 5-1705300-0 800 Bold Part Numbers are tooled All specifications subject to change. Consult Tyco Electronics for latest specifications. 9 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Scaleable SIM Connector Scaleable SIM Connector Features Scaleable SIM connector height from 0.7 mm to 2.0 mm (housing height), featuring two different kind of clips. 1 clip allover (1 piece clip design). The one piece clip design prevents for card bow. 2 piece clip design allows easy removal of the SIM card. Both versions have contact retention (anti lifting) features and smooth rounded contacts in order to decrease card wear to the minimum. Material and Finish Insulator: GF liquid crystal polymer, black color Contact Pin: Copper alloy Part Numbers Total Housing Contact Plating: SIM with Card Stop SIM without Card Stop SIM without Card Stop Height Height 1.2 µm nickel underlayer, Clip Allover Clip Allover 2-Piece Clip (mm) (mm) 1.25 µm gold at card side, (1000 Pieces per Reel) (750 Pieces per Reel) (1100 Pieces per Reel) 0.1–0.2 µm gold at solder side 1.9 0.7 -1747314-1 –– Clip: 2.0 0.8 – – – Stainless steel/phosphor bronze 2.1 0.9 -1871406-1 –– Clip Plating: 2.2 1.0 – – – 3.0 µm Sn allover, over 1.3 µm nickel underlayer 2.3 1.1 – – – 2.4 1.2 2-292292-4 –– 2.5 1.3 2-292292-5 – 1-1705615-3 2.6 1.4 2-292292-6 2-292373-6 1-1705615-4 2.7 1.5 2-292292-7 2-292373-7 1-1705615-5 2.8 1.6 2-292292-8 2-292373-8 1-1705615-6 2.9 1.7 2-292292-9 2-292373-9 1-1705615-7 3.0 1.8 3-292292-0 3-292373-0 1-1705615-8 3.1 1.9 3-292292-1 3-292373-1 1-1705615-9 3.2 2.0 – 3-292373-2 2-1705615-0 Bold Part Numbers are tooled Documentation Part No. 1705615 Part No. 292292 Part No. 292373 Part No. 1747314 Customer Drawing C-1705615 C-292292 C-292373 C-1747314 Product Specification 108-19241 108-60031 108-60031 108-5998 Test Report 501-19069 501-60001 501-60001 501-5559 Application Specification 114-19075 not available not available not available 10 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Super Low Profile SIM Connector with Full Clip Super Low Profile SIM Connector with Full Clip Features • Connector Height = 1.55 mm max. • Size (H x W x L): 1.43 x 16.3 x 17.5 mm • Big clip totally encapsulates SIM contact area • Soldered clips provide additional mechanical stability • Datecode printed on the product Material and Finish Housing: LCP Contacts: Copper alloy 1.3 µm nickel underlayer 0.4 µm gold in the contact area and 0.05 µm gold in the soldering area Clip: Stainless steel 1.3 µm nickel under- layer, tin plated all over 16.3 Documentation Drawing: C-1981898 Product Specification: 108-78472 Test Report: See Product Specification Application Specification: 114-19075 17.5 17.0 0.5 typ. 2.54 1.43 Part No. 1981898-1 Package Quantity: 1000 pcs per reel All specifications subject to change. Consult Tyco Electronics for latest specifications. 11 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Mini UICC SIM Connector Mini UICC SIM Connector Features This sliding SIM connector has been developed for usage with third generation SIM cards. The scaleable connector is avail- able in heights from 1.2 mm to 1.9 mm (housing height). The forky contact provides a preload as well as anti lifting capabilities. The smooth and rounded con- tacts ensure minimal card wear, while the clip keeps the card in position during usage. Material and Finish Insulator: 8.1 3.9 GF liquid crystal polymer, black color Contact Pin: Copper alloy Contact Plating: 1.2 µm nickel underlayer, 1.25 µm gold at card side, 0.1–0.2 µm gold at solder side 13.4 12.9 Clip: 11.3 Stainless steel 7.7 5.0 Clip Plating: 3.0 µm Sn allover, 2.89 over 1.3 µm nickel underlayer 5.43 7.97 2.54 Documentation 1.0 13.4 Drawing: 12.1 C-1705813 13.4 Product Specification: 0.9 108-19241 Test Report: 2.7 2.77 501-19069 1.6 2.2 Application Specification: PCB Layout 114-19075 Package Total Height Housing Height Part Quantity (mm) (mm) Number (Pieces/Reel) 1.9 0.7 1-1827465-1 1000 2.4 1.2 1-1705813-2 1000 2.5 1.3 1-1705813-3 1000 2.6 1.4 1-1705813-4 1000 2.7 1.5 1-1705813-5 1000 2.8 1.6 1-1705813-6 1000 2.9 1.7 1-1705813-7 1000 3.0 1.8 1-1705813-8 1000 3.1 1.9 1-1705813-9 1000 Bold Part Numbers are tooled 12 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Sliding SIM Connector, 8 Positions Sliding SIM Connector, 8 Positions Features SIM (Security Identity Module) and UIM (Universal Identity Modules) cards have been and continue to be used in mobile equipment. Tyco Electronics offers a wide selection of low cost SMT sliding SIM connectors. Material and Finish Insulator: Thermoplastic HT, UL 94 V-0 rated, black color 15.7 Contact Pin: Copper alloy 2.65 11.8 Contact Plating: 0.6 Selective gold over nickel plated 1.0 5.9 Clip: ∅ 0.6 Brass, tin over nickel plated 2.5 3.7 Documentation Drawing: 7.62 7.62 16.4 C-1857118 2.54 typ. ∅ 0.8 ∅ 0.9 0.9 13.3 8.0 0.78 Part No. 1857118-1 5.3 Package Quantity: 800 Pieces per Reel 0.2 1.55 11.41 PCB Layout All specifications subject to change. Consult Tyco Electronics for latest specifications. 13 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors 0.4 mm Pitch 1.0 mm or 1.5 mm Height Board-to-Board Connector 0.4 mm Pitch 1.0 mm or 1.5 mm Height Board-to-Board Connector Features 1.0 mm or 1.5 mm mated height low profile stacking connector. Connector body width is only 2.7 mm and enables space saving. Formed contacts provide contact points on rolled surface enabling high reliability. Multiple point contact system is available (see note in table). For the latest information please contact your local sales engineer. 0.2n + 2.05 0.2n + 1.20 Material and Finish 0.2n – 0.40 Insulator: 0.4 Pitch Thermoplastic, black color Contact Pin: Copper alloy 1.23 2.2 2.66 Contact Plating: Gold plating over nickel underplating Documentation 0.2n + 2.1 Drawing: 0.2n + 1.2 C-See table 0.2n – 0.4 Product Specification: 0.4 Pitch 108-5901 Test Report: 501-5570 1.26 2.2 2.7 Instruction Sheet: 411-78159 Stacking Height 1.0 mm Stacking Height 1.5 mm No. of Prototype Mass Pro- Prototype Mass Pro- Positions Plug Receptacle Plug Receptacle Tool duction Tool Tool duction Tool 10 1-1871566-0 1-1747769-0 X – 1-1871275-0 1-1871274-0 X – 12 1-1871566-2 1-1747769-2 X – 1-1871275-2 1-1871274-2 – – 16 1-1871566-6 1-1747769-6 X – 1-1871275-6 1-1871274-6 – – 20 2-1871566-0 2-1747769-0 – X 2-1871275-0 2-1871274-0 – – 22 2-1871566-2 2-1747769-2 X – 2-1871275-2 2-1871274-2 – – 24 2-1871566-4 2-1747769-4 – X 2-1871275-4 2-1871274-4 – X 28 2-1871566-8 2-1747769-8 X – 2-1871275-8 2-1871274-8 – – 30 3-1871566-0 3-1747769-0 X – 3-1871275-0 3-1871274-0 – – 40 4-1871566-0 4-1747769-0 X – 4-1871275-0 4-1871274-0 – – 46 4-1871566-6 4-1747769-6 – X 4-1871275-6 4-1871274-6 – – 50 5-1871566-0 5-1747769-0 – X 5-1871275-0 5-1871274-0 – – 54 5-1871566-4 5-1747769-4 – – 5-1871275-4 5-1871274-4 – X 56 5-1871566-6 5-1747769-6 – – 5-1871275-6 5-1871274-6 – X 60 6-1871566-0 6-1747769-0 – X 6-1871275-0 6-1871274-0 – – 70 7-1871566-0 7-1747769-0 – – 7-1871275-0 7-1871274-0 – – 80 8-1871566-0 8-1747769-0 X – 8-1871275-0 8-1871274-0 – – Stacking Height 1.0 mm: Plugs and Receptacles 4000 per Reel Stacking Height 1.5 mm: Plugs and Receptacles 3000 per Reel Please contact sales for other pin counts. 14 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors 0.3 mm FPC Connector 0.3 mm FPC Connector Features 1.0 mm height low profile and 3.8 mm width narrow FPC connector for space saving. FCP is securely connected with easy one touch flip lever actuator. For the latest information please contact your local sales engineer. Material and Finish 0.3n + 1.3 0.3n – 0.9 Insulator: Thermoplastic 0.12 typ. 0.6 Pitch Ref. Color: Body: beige, Actuator: black 1.85 2.5 Contact Pin: Copper alloy Contact Plating: Gold plating over nickel underplating 0.3 Pitch 0.3n – 0.3 Documentation 0.3n + 0.6 3.0 Drawing: 0.2 C-1746237 Product Specification: 0.9 108-5944 Test Report: 501-5647 Part Numbers No. of Narrow Type Standard Type Positions Front Flip Lock Back Flip Lock Front Flip Lock 11 0-1827827-1 0-1827674-1 0-1746237-1 13 0-1827827-2 0-1827674-2 0-1746237-2 15 0-1827827-3 0-1827674-3 0-1746237-3 17 0-1827827-4 0-1827674-4 0-1746237-4 19 0-1827827-5 0-1827674-5 0-1746237-5 21 0-1827827-6 0-1827674-6 0-1746237-6 23 0-1827827-7 0-1827674-7 0-1746237-7 25 0-1827827-8 0-1827674-8 0-1746237-8 27 0-1827827-9 0-1827674-9 0-1746237-9 29 1-1827827-0 1-1827674-0 1-1746237-0 31 1-1827827-1 1-1827674-1 1-1746237-1 33 1-1827827-2 1-1827674-2 1-1746237-2 35 1-1827827-3 1-1827674-3 1-1746237-3 37 1-1827827-4 1-1827674-4 1-1746237-4 39 1-1827827-5 1-1827674-5 1-1746237-5 41 1-1827827-6 1-1827674-6 1-1746237-6 43 1-1827827-7 1-1827674-7 1-1746237-7 45 1-1827827-8 1-1827674-8 1-1746237-8 47 1-1827827-9 1-1827674-9 1-1746237-9 49 2-1827827-0 2-1827674-0 2-1746237-0 51 2-1827827-1 2-1827674-1 2-1746237-1 53 2-1827827-2 2-1827674-2 2-1746237-2 55 2-1827827-3 2-1827674-3 2-1746237-3 57 2-1827827-4 2-1827674-4 2-1746237-4 Package Quantity: 4000 Pieces per Reel Please contact sales for available pin counts. All specifications subject to change. Consult Tyco Electronics for latest specifications. 15 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Circular Audio Connectors Circular Audio Connectors Features Tyco Electronics offers several circular Audio Connectors for usage with 3.5 mm or 2.5 mm diameter plug. The mounting style, which can be either SMD or compressive, where the compressive style does not require a solder connection and is invulnerable for forces applied to the connection. Material and Finish: See drawing Documentation Drawing: See table Product Specification: See table Test Report: See table Package Plug Part Connection Length Width Height Location Product Test Quantity Diameter Switch Number Style (mm) (mm) (mm) Pins Specification Report (Pieces) (mm) 1) 1) 1705058-1 4000 per Box 2.5 Compressive 13.5 07.2 5.0 Y N/A 108-19TBA 501-19TBA 1775250-1 1000 per Reel 2.5 SMD 11.6 07.7 3.0 Y Y 108-57570 501-57660 1470964-1 1000 per Reel 2.5 SMD 06.8 11.6 3.0 Y Y 108-57466 501-57536 1) 2) 1377032-3 3000 per Box 3.5 Compressive 12.7 13.0 5.0 Y N/A 108-19190 501-19056 1) 2) 1377032-2 3000 per Box 3.5 Compressive 12.7 13.0 5.0 Y N/A 108-19190 501-19056 1470033-1 50 per Tube 3.5 TH 14.2 09.2 4.5 Y Y 108-57185 501-57175 1470164-1 310 per Tray 3.5 TH 14.0 09.0 4.5 Y Y 108-57147 501-57130 1) 3) 0440217-1 55 per Tube 3.5 TH 14.2 09.2 4.5 Y Y 108-57047 501-57121 1) 4) 0440217-2 55 per Tube 3.5 TH 14.2 09.2 4.5 Y Y 108-57047 501-57121 1470636-1 700 per Reel 3.5 TH 13.5 06.0 5.0 Y Y 108-57296 501-57326 1470636-2 200 per Tray 3.5 TH 13.5 06.0 5.0 Y Y 108-57296 501-57326 1470778-1 700 per Reel 3.5 TH 13.5 06.0 5.0 Y Y 108-57296 501-57399 0440343-1 250 per Tray 3.5 TH 15.0 10.8 7.3 Y Y 108-57462 501-57532 1 ) Not yet tooled 2 ) Audio + DC, Application Specification 114-19046 3 ) Ring Color Silvery White 4 ) Ring Color Black 16 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Circular DC Connectors Circular DC Connectors Features Tyco Electronics offers several Circular DC Connectors for usage with 3.5 mm or 2.5 mm diameter plug. The mounting style, which can be either SMD or compressive, where the compressive style does not require a solder connection and is invulnerable for forces applied to the connection. Material and Finish: See drawing Documentation Drawing: See table Product Specification: See table Test Report: See table Package DC Plug Pin Part Connection Length Width Height Location Product Test Quantity Diameter Switch Diameter Number Style (mm) (mm) (mm) Pins Specification Report (Pieces) (mm) (mm) 1470177-1 800 per Reel 3.5 SMD 9.3 8.0 5.2 Y 1.00 Y 108-57176 501-57187 1470177-2 800 per Reel 3.5 SMD 9.3 8.0 5.2 Y 1.30 Y 108-57176 501-57187 1857353-1 1000 per Reel 3.5 SMD 9.3 8.0 5.3 Y 1.00 Y – – 1857353-2 1000 per Reel 3.5 SMD 9.3 8.0 5.3 Y 1.30 Y – – 1) 1) 1377032-3 3696 per Box 3.5 Compressive 12.70 13.00 5.0 Y 1.00 N/A 108-19190 501-19056. 1) 1) 1377032-2 3696 per Box 3.5 Compressive 12.70 13.00 5.0 Y 1.25 N/A 108-19190 501-19056. 1) 2) 1483596-2 308 per Tray 2.5 Compressive 10.30 6.2 4.5 N 0.65 N/A 108-19278 501-19TBA 1) 3) 1483596-1 308 per Tray 2.5 Compressive 10.30 6.2 4.5 N 0.65 N/A 108-19278 501-19TBA 1 ) Audio + DC, Application Specification 114-19046 2 ) Application Specification 114-19091 3 ) Color Yellow All specifications subject to change. Consult Tyco Electronics for latest specifications. 17 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Mini USB Plug Mini USB Plug Features Tyco Electronics offers a complete range of (Mini) USB receptacles, cables and plugs. The system is fully compliant with the USB specification and supports data transmission speeds >USB 2.0 full speed. Material and Finish Insulator: LCP, glass-filled, black color Contact Pin: Phosphor bronze Contact Plating: Selectively plated gold over nickel Documentation Drawing: C-1734205 Product Specification: 108-57062 Test Report: 501-57070 Mini B Plugs Package No. of Part Type Color Description Quantity Contacts Number (Pieces) 4 Mini B Black Mini B Plug with Contact Insert 4 Positions 0-1734205-1 1000 per Bag 5 Mini B Black Mini B Plug with Contact Insert 5 Positions 1-1734205-1 1000 per Bag Not applicable Mini B Not applicable Top and Front Shield 3-1734205-1 1000 per Bag Not applicable Mini B Not applicable Bottom Shield 4-1734205-1 1000 per Bag USB 2.0 Type A to Mini B Cable Assemblies Package No. of Length Part Plug 1 Plug 2 Color Description Quantity Conductors (mm) Number (Pieces) Standard USB-A to Mini-B Assembly, 1.0 M 1000 1496476-1 275 per Box Standard USB-A to Mini-B Assembly, 1.5 M 1500 1496476-2 220 per Box Standard USB-A to Mini-B Assembly, 2.0 M 2000 1496476-3 150 per Box Standard USB-A to Mini-B Assembly, 3.0 M 3000 1496476-4 110 per Box 4 USB Type A Mini B Black Standard USB-A to Mini-B Assembly, 5.0 M 5000 1496476-5 60 per Box Standard USB-A to Mini-B Assembly, 12″ 305 1496476-6 200 per Box Standard USB-A to Mini-B Assembly, 8″ 203 1496476-8 10 per Box C2113A USB Cable 800 1750516-1 200 per Box 18 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Mini USB Receptacle Mini USB Receptacle Features Tyco Electronics offers a complete range of (Mini) USB receptacles, cables and plugs. The system is fully compliant with the USB specification and supports data transmission speeds >USB 2.0 full speed. Material and Finish Housing: High temperature thermoplastic, UL 94 V-0, black color Contact: Phosphor bronze, selectively plated gold over nickel and tin-lead in solder area Shell: Phosphor bronze, half bright tin over copper underplating Documentation Drawing: C-See table Product Specification: Mini USB Receptacles, Type B 108-57062 Test Report: Package No. of Locating P&P Part Color Description Quantity 501-57070 Contacts Post Tape Number (Pieces) 4 Black Mini USB, Receptacle Y N 1-1775055-1 700 per Reel 1-1734035-1 150 per Tray YN 1-1734035-3 700 per Reel 5 Black Mini USB, Right-Angle, SMT, pbFree Y Y 1-1734035-4 700 per Reel 1-1734035-1 150 per Tray NN 1-1734035-3 700 per Reel All specifications subject to change. Consult Tyco Electronics for latest specifications. 19 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Micro USB Connector Micro USB Connector Features and Advantages The brand new Micro USB con- nector further decreases the size needed for the popular USB con- nector system, while maintaining performance on the same level. It is specifically developped for mobile phone applications where size is a major issue. • Low profile connector system; Height = 2.7 mm (2.7 x 5.0 x 7.5 mm) • Robust design • 10,000 cxycles durability • Latching design provides strong mating Material and Finish Insulator: Thermoplastic resin Contact Pin: Copper alloy Contact Plating: Selectively gold plated over Ni-Pd over nickel Shell: Stainless steel, tin over nickel plated Package No. of Part Type Color Description Quantity Documentation Conductors Number (Pieces) Drawing: Gray Receptacle AB 1981584-1 1000 C-See table Receptacle Product Specification: Black Receptacle B 1981568-1 1000 5 108-78434 White Plug A Type 1939053-1 1000 Plug Test Report: Black Plug B Type 1939054-1 1000 See Product Specification 20 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Generic Snake and Pad Connector Generic Snake and Pad Connector Features The Snake and Pad contact system is a spring loaded approach to the I/O connector. Inherently the system is very forgiving of large mating tolerances and boasts a low total application cost. Using this proven contact system Tyco Electronics has 12 and 16 pos. standard connectors available. The connector system uses solderless compression in-phone “pad” and cradle cable plug “snake” contacts. The plug con- sists of full load cradle and cable connectors as well as charging plugs. The connector system can be keyed for individual customer 29.9 applications. Tyco Electronics 25.7 Snake and Pad connectors are highly reliable cellular intercon- ∅ 3.7 2.75 nect solutions, used in millions 8.75 8.4 of handsets. 6.0 Material and Finish Insulator: 35.4 LCP, glass-filled, black color 0.7 typ. Contact Pin: Phosphor bronze 2.4 Contact Plating: 5.0 Selectively plated gold over nickel at contact position, tin over nickel at solder area 1.1 typ. Locking Springs: 26.8 POM, black color Documentation Drawing: C-See table 5.3 Product Specification: 4.35 108-19184 Test Report: 501-19044 3.3 5.2 1.65 max. 14.2 Application Specification: 114-19060 Mates with 5338980 5338979 5338982 338966 338967 Package PCB Part No. of Quantity Type Application Thickness 2 Pos. 12 Pos. 16 Pos. 12 Pos. 16 Pos. Number Pos. (Pieces) (mm) 5338980-1 2250 per Box 2 Plug Cable – – – – X X 5338979-1 2250 per Box 12 Plug Desktop Stand – – – – X – 5338979-2 2250 per Box 12 Plug Cable – – – – X – 5338982-1 1750 per Box 16 Plug Desktop Stand – –––– X 5338982-2 1750 per Box 16 Plug Cable – –––– X ✱ 338966-9 250 per Box 12 Receptacle N/A 0.9 X X ––– ✱ 1-338967-2- 250 per Box 16 Receptacle N/A 1.2 X–X– – ✱ ) Other PCB thickness can be made available upon request. All specifications subject to change. Consult Tyco Electronics for latest specifications. 21 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Multi Media Interface Connector Multi Media Interface Connector Features This small versatile Multi Media Interface Connector supports various digital data/audio appli- cations. Proprietary metal shell side lock provides superb EMI per- formance as well as mechanical robustness. Various cable assemblies are provided to support many mobile electronics applications. 2.0 5.3 1.5 0.18 1.0 Material and Finish 7.25 4.5 7.5 6.7 4.0 6.2 9.0 Insulator: Thermoplastic, UL 94 V-0, black color 0.5 typ. Contact Pin: 0.3 Copper alloy 7.5 Contact Plating: 8.5 1.0 µm min. nickel underlayer, 0.1 µm min. gold at mating side, 0.01–0.2 µm gold at solder tin 3.0 Shell Plating: 3.95 3.0 2.5 1.4 4.0 0.5 µm min. tin plating 0.95 0.2 Documentation 6.2 Drawing: 8.15 See table 7.05 Product Specification: See table Test Report: 0.3 See table 1.1 0.5 typ. 6.2 8.0 1.1 0.5 PCB Layout 1.9 1.3 (for reference only) MMI Connectors Package No. Height Part Pitch Type Style Description Quantity Comment of Pos. (mm) Number (Pieces) Plug N/A N/A Plug Assy for Ear Phone Connector 1612633-1 150 per Tray – 3.0 DIP Receptacle Assemby for Ear Phone 1612634-1 1500 per Reel – 3.0 SMT Receptacle Assy for Ear Phone Jack Connector 1674432-1 1200 per Reel – 10 3.2 DIP Rec. Assy for Ear Phone Connector onboard reverse 1827349-1 1500 per Reel Reversed Receptacle 1.4 DIP Receptacle Assy for Ear Phone Connector off 1674787-1 1500 per Reel Inboard 0.5 2.4 DIP Receptacle Assy for Ear Phone Connector off 1747124-1 1200 per Reel Inboard 2.4 DIP Receptacle Assy for Ear Phone Connector off 1746223-1 1500 per Reel Inboard, reversed Plug N/A N/A Plug Assy for MMIC 1746717-1 110 per Tray – 12 Receptacle 3.0 SMT Receptacle Assy for MMIC 1746716-1 600 per Reel – Plug N/A N/A Plug Assy for DC Cable 1717169-1 110 per Tray – 14 Receptacle 3.0 DIP Emboss Assy for MMIC Receptacle 1717312-1 600 per Reel – 22 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors MDIC and S-MDIC Connector System, 12 Positions MDIC and S-MDIC Connector System, 12 Positions Features The MDIC and S-MDIC I/O connector systems are further decreasing the size of common I/O interfaces. This 12 positions connector system is highly miniaturized and features a receptacle height as small as 2.0 mm. Small Size (L x W x H): 6.0 x 7.2 x 2.5 mm (S-MDIC) 7.15 x 8.7 x 2.0 mm (MDIC) Packaged in Tape and Reel Material and Finish Receptacle Plug Insulator: Thermoplastic acc. UL 94 V-0 6.5 4.0 1.85 Contacts: Copper alloy 0.3 µm gold over 0.8 typ. 1.3 µm nickel in contact area. 0.4 typ. Gold-flash in other areas. Shell: SUS nickel plated 2.0 µm min. 6.55 8.2 7.2 7.5 6.7 8.5 0.2 0.12 0.15 10.3 3.5 2.53 2.0 1.5 3.0 3.5 3.15 4.5 0.8 S-MDIC as shown Pitch Height Description Part Number Package Quantity (mm) (mm) S-MDIC Receptacle 0.4 2.5 368560-1 1000 per Reel S-MDIC Receptacle, Reversed 0.4 2.5 368565-1 1000 per Reel S-MDIC Plug 0.4 N/A 368555-1 1750 per Tray MDIC Receptacle 0.5 2.0 1827541-1 1000 per Reel MDIC Plug 0.5 N/A 1827546-1 1110 per Tray 23 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors HDMI Connectors, Type C HDMI Connectors, Type C Features New reduced form factor connector for small portable devices such as camcorders, still cameras and mobile phones. Compliant with HDMI version 1.3 specification. These HDMI connectors are on the approved connector list. Material and Finish Insulator: Thermoplastic acc. UL 94 V-0, color black Contact: 11.2 7.4 Copper alloy 8.5 0.35 Shell: Copper alloy Pick and Place Feature: 3.45 2.1 Polyamide tape 1.0 10.85 2.3 30.0 14.0 6.5 2.42 9.0 8.4 10.4 10.85 0.375 typ. 1.0 typ. 0.8 typ. 4.7 1.1 typ. 0.2 typ. 0.4 typ. PCB Layout 7.2 24 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Memory Card Connectors Memory Card Connectors Features Tyco Electronics offers a wide range of memory card connectors in several variations. Material and Finish: See drawing Documentation Drawing: See table Product Specification: See table Package Card Write Height Ejection Product Type Part Number Quantity Detection Protect Standoff Location Pin Packaging Type Specification (Pieces) Switch Switch (mm) SD 0-1470139-1 40 per Tray P-P Y Y 0 0.70 Long Tray 108-57127 0-1470139-2 32 per Tray P-P Y Y 0 0.70 Short Tray 108-57127 0-1470139-3 300 per Reel P-P Y Y 0 0.70 T&R 108-57127 0-1734234-1 45 per Tray P-PI Y Y 0 0.85 Tray 108-57127 0-1734234-2 500 per Reel P-PI Y Y 0 0.85 T&R 108-57127 0-1734234-3 45 per Tray P-PI Y Y 0 0.40 Tray 108-57127 0-1734234-4 500 per Reel P-PI Y Y 0 0.40 T&R 108-57127 0-1734472-1 40 per Tray P-P Y Y 0 0.70 Long Tray 108-57127 0-1734472-2 32 per Tray P-P Y Y 0 0.70 Short Tray 108-57127 0-1734472-3 300 per Reel P-P Y Y 0 0.70 T&R 108-57127 ✱ 1-1734472-1 40 per Tray P-P Y Y 0 0.70 Long Tray 108-57127 ✱ 1-1734472-2 32 per Tray P-P Y Y 0 0.70 Short Tray 108-57127 ✱ 1-1734472-3 300 per Reel P-P Y Y 0 0.70 T&R 108-57127 0-1871250-3 220 per Reel P-P Y Y 0 0.55 T&R 108-78220 0-1871250-4 220 per Reel P-P Y Y 0 0 T&R 108-78220 ✱✱ 0-1871583-1 280 per Reel P-P Y Y 0 0.55 T&R 108-78220 ✱✱ 0-1871583-2 281 per Reel P-P Y Y 0 0 T&R 108-78220 0-1871583-3 282 per Reel P-P Y Y 0 0.55 T&R 108-78220 0-1871583-4 283 per Reel P-P Y Y 0 0 T&R 108-78220 0-0440297-1 48 per Tray P-P Y Y 0 0.85 Tray 108-57127 0-0440297-2 500 per Reel P-P Y Y 0 0.85 T&R 108-57127 0-0440297-3 48 per Tray P-P Y Y 0 0.45 Tray 108-57127 0-0440297-4 500 per Reel P-P Y Y 0 0.45 T&R 108-57127 SD Reverse 0-1775059-1 250 per Reel P-P Y Y 0 0.50 T&R 108-57504 0-1775012-1 250 per Reel P-P Y Y 1.2 0.50 T&R 108-57504 0-1775067-1 250 per Reel P-P Y Y 0 0.50 T&R 108-57504 0-1871916-1 200 per Reel P-P Y Y 0 0.45 T&R – 0-1903302-1 180 per Reel P-P Y Y 0 0.45 T&R – Memory Stick 0-1674162-1 45 per Tray P-P Y N 0 0.80 Tray 108-57340 0-1674319-1 54 per Tray P-P N N 0 0 Tray 108-57340 0-1470332-1 72 per Tray P-PI N N 0 0.60 Tray 108-57238 0-1717431-1 54 per Tray P-P N N 0 0 Tray 108-57340 XD 0-1470864-1 50 per Tray P-PI N N 0 0.45 Tray 108-57432 T-Flash 0-1827034-1 1100 per Reel P-P N N/A 0 0 T&R 108-78224 Mini SD 0-1775204-1 750 per Reel P-P Y N/A 0 0.5 T&R 108-57589 Micro SD 0-1871602-1 1000 per Reel P-P Y N/A 0 0 T&R 108-78337 0-1871602-2 1000 per Reel P-P Y N/A 0 0.45 T&R 108-78337 MMC 0-0338610-1 1350 per Reel P-PI N N/A 0 0 T&R 108-19173 ✱ ✱✱ ) Full cover ) Reversed reflow possible All specifications subject to change. Consult Tyco Electronics for latest specifications. 25 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Micro SD Connector Micro SD Connector Features The Micro SD socket has an easy- to-use push-push connection. It is equipped with a mechanism we created in-house that maintains sufficient card ejection stroke while preventing the card from popping out. Also, it provides high reliability in a compact low profile shape with a durable card detection switch built-in and it holds contact securely. The Micro SD/SD adapter achieves long- lasting high operability by using an internal construction that prevents flexing and other stresses on the case from being conveyed to contacts. Micro SD Socket • Excellent insertion click • Rugged connectivity maintains connections • Supports embossed packaging Micro SD/SD Adapter 14.6 1.73 • Hook spring mechanism makes clear click connection • Comes with socket • Any label design modification is possible • Equipped with write protect key 14.3 15.3 16.0 Material and Finish Insulator: Thermoplastic, black color Contact: Copper alloy, gold over nickel plated Shell: Copper alloy, gold over nickel plated Coil: SWP 1.7 1.35 Cam Rod: SUS 2.5 Hook Spring: SUS Part No. 1871602-1 without Locating Pin Documentation Part No. 1871602-2 with Locating Pin Drawing: C-1871602 Product Specification: 108-78337 Test Report: 501-5756 26 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Micro SD/SIM Combi Connector Micro SD/SIM Combi Connector Features This connector combines a Micro SD memory slot with a SIM card connector on top of it. Besides of the enormous space savings this brings, the connector also includes features like shield- ing test points and of course push-push ejection system and a card detection switch. Material and Finish SIM Contact: Copper alloy, plated gold over nickel Insulator: Thermoplastic, black color Micro SD Contact: Copper alloy, plated gold over nickel Switch Contacts: Copper alloy plated gold over nickel Cam Slider: 17.3 Thermoplastic, black color Cam Hook Spring: 8.0 Stainless steel 3.0 Camrod: Stainless steel Coil Spring: 1.1 typ. Piano wire nickel plated Bottom Shell: Copper alloy, nickel plated 14.28 17.6 Top Shell: 19.7 Copper alloy, gold over nickel plated 11.0 Documentation 0.4 Drawing: 3.4 1.45 1.8 C-368637 Product Specification: 108-61079 18.85 0.65 1.1 1.3 0.6 1.5 Test Report: 501-61050 0.95 16.3 1.9 1.27 2.8 PCB Layout Part No. 368637-3 Package Quantity: 600 Pieces per Reel All specifications subject to change. Consult Tyco Electronics for latest specifications. 27 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Micro SD Adapter Micro SD Adapter Features This adapter allows the Micro SD card to be read in a normal SD card slot. The adapter is equipped with a spring which provides required retention force for the Micro SD card. Custom labeling can be provided on demand. Material and Finish Insulators: Thermoplastic Contacts: Copper alloy selective gold plated Spring: Stainless steel Label: PET Documentation Drawing: Description Part Number Package Quantity C-1903290 Micro SD Adapter with Soft Case 1903290-1 60 Tray Product Specification: 108-78355 28 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Spring Probe Connector (SPC), 1 Position Spring Probe Connector (SPC), 1 Position Features Spring Probe Connectors require very small space on printed circuit board. Spring Probe Connectors can be used for battery connections as well as antenna, shielding and many other applications. A wide variety of pin count, size, and soldering interfaces are available. Please contact your sales for more details. Material and Finish Plunger: Brass Body: Brass Spring: Piano wire Contact Plating: Nickel underlayer, 0.1 µm min. gold plating Height / Length (mm) Force (N) Force (N) Max. Min. Un- Body Working Min. Nominal Max. Min. Max. Compression Compression compressed Height Height Force Force Force Diameter Diameter Height Height Height 6.26 6.26 6.76 7.26 7.76 0.3 0.8 +/- 0.2 2 1.5 1.9 3.10 3.20 3.60 4.00 4.20 0.3 0.8 +.6 -0.2 – 1.5 1.9 6.10 6.20 6.60 7.10 7.60 0.5 0.9 +/-0.3 – 1.5 1.8 5.13 5.68 6.08 6.70 6.88 0.3 N/A 1.3 1.5 2.3 5.00 5.10 5.45 6.00 6.50 0.3 0.9 +/- 0.3 – 1.5 1.8 7.60 7.75 8.15 8.65 9.15 0.3 0.9 +/- 0.3 – 1.5 1.8 7.30 7.40 7.80 8.30 8.80 0.3 0.9 +/- 0.4 – 1.5 1.8 4.90 – 5.47 – 6.10 N/A 1 – 001.175 001.175 7.35 7.90 8.40 8.90 9.40 0.6 N/A 1.8 1.5 02.65 All specifications subject to change. Consult Tyco Electronics for latest specifications. 29 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Spring Fingers Spring Fingers Features Spring Fingers provides highly reliable connection in many applications such as shielding, cconnection to vibration motors, antennas, speakers and micro- phones. Our large portfolio contains products with several mating heights and plating variants. Material and Finish Contact Pin: Copper alloy Contact Plating: See table Documentation: Drawing: See table Product Specification: See table Test Report: See table Package Uncompressed Effective Plating Plating Part Width Base Product Test Description Quantity Height Height Solder Contact Number (mm) Material Specification Report (Pieces) (mm) (mm) Area Area 820 0-1447009-5 5000 per Reel 2.0 0.8 0.3–0.5 Cu Alloy Au Au 108-78123 501-78113 915 0-1483748-1 5000 per Reel 1.5 0.8 0.6–0.3 Cu Alloy Au Au – – 1312 0-1447009-6 5000 per Reel 1.2 1.3 0.7–1.0 Cu Alloy Au Au 108-78135 501-78123 1410 1-1447360-1 5000 per Reel 1.0 1.4 1.05–1.30 Cu Alloy Au Au 108-78174 501-78159 1511 0-1565158-1 5000 per Reel 1.1 1.5 0.95–1.30 Cu Alloy Au Au 108-57850 – 1520 0-1746136-1 5000 per Reel 2.0 1.5 0.6–1.0 BeCu Au Au – – 1608 0-1565322-1 5000 per Reel 0.8 1.6 1.1–1.4 Cu Alloy Au Au 108-57860 – 1715 0-1447360-9 5000 per Reel 1.5 1.7 0.9–1.3 Cu Alloy Au Au 108-78143 – 1895 0-1857724-4 5000 per Reel 0.95 1.8 1.5–1.0 Stainless Steel Au Au – – 3025 Z1-T 0- 440432-1 2500 per Reel 2.5 3.0 1.0–2.5 Cu Alloy Sn Au 108-57169 501-57159 3025-Z1T2 0-1734300-1 2500 per Reel 2.5 3.0 0.8–3.0 Cu Alloy Sn Au 108-57507 501-57581 3525A 0-1447009-8 2000 per Reel 2.5 3.5 2.0–3.0 Cu Alloy Au Au 108-78162 501-78162 4025 0-1437259-6 2000 per Reel 2.5 4.0 2.0–3.5 Cu Alloy Ni Ni 108-78156 501-78141 404025C-T 0-1720028-2 2000 per Reel 2.5 4.0 0.8–3.2 Cu Alloy Sn Sn 108-57507 501-57581 5025T 0- 440423-1 1500 per Reel 2.5 5.0 2.0–4.0 Cu Alloy Au Au – – 6525 0- 440430-1 1200 per Reel 2.5 6.5 4.0–6.5 Cu Alloy Sn Au 108-57130 501-57110 30 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors LCD ITO Connector, 8 Positions LCD ITO Connector, 8 Positions Features 8 positions ITO connector for chip on glass technology. The connector is being glued to the LCD, using an anisotropic con- ductive film. The compressive part of the connector is used for contacting the PCB. Material and Finish Insulator: Thermoplastic resin, black color Contact Pin: Copper alloy Contact Plating: 0.25 µm gold min. over 1.3 µm nickel in contact zones. Documentation Drawing: C-338970 8.05 Product Specification: 108-19189 0.4 1.15 typ. Test Report: 501-19047 Application Specification: 3.2 114-19061 1.8 0.6 3.5 16.0 4.5 Part No. 338970-1 Package Quantity: 1300 Pieces per Reel All specifications subject to change. Consult Tyco Electronics for latest specifications. 31 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors LCD Connector 0.65 mm, 10 Positions LCD Connector 0.65 mm, 10 Positions Features The connector is SMD soldered to the main board and provides a stable and reliable connection by compressive contacts with the LCD module. Material and Finish Insulator: Glass-reinforced LCP, black color Contact Pin: BeCu Copper alloy Bracket: BeCu Copper alloy Contact Plating: 0.5 µm gold min. over 1.3 µm nickel 17.15 in contact zone. Other area’s flash gold over 1.3 µm nickel. 2.1 Documentation 5.35 Drawing: 6.8 C-1705536 Product Specification: 108-19269 1.5 typ. 13.5 5.18 Part No. 1705536-2 0.62 2.15 Package Quantity: 1900 Pieces per Reel 1.1 17.4 9 x 1.5 = 13.5 1.5 1.2 0.8 4.85 7.17 1.64 1.4 0.78 0.9 PCB Layout 16.7 32 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Standard Switching Coax Standard Switching Coax Features These switching coax connectors are used for testing and setting the power of the phone on the production lines but also to make external switched connection in a car kit application to use an external antenna. The deep drawn outer shell allows a misalignment tolerance capture up to 1.0 mm in all direction. This system allows up to 20.000 mating/switching cycles. 3 different height available: 6.0 mm, 4.5 mm and 3.5 mm (only 0.5 mm tolerance capture). Coplanarity: 0.1 mm 2.7 Material and Finish Dielectric: PEEK, natural color 3.1 0.8 2.4 3.1 Outer Shell: Steel gold plated 2.7 Switch Contacts: Stainless steel, selective plated Center Pin: 3.8 3.2 0.9 Brass, gold plated 4.3 3.7 8.0 2.4 ∅ 5.4 Documentation ∅ 3.4 Drawing: C-619061, C-61062 and 619072 ∅ 0.6 Product Specification: 108-71000 3.7 3.0 Test Report: 501-19028 4.0 4.6 Dim. A 2.5 1.7 Recommended PCB Layout 0.1 Dimension A Part Package Quantity (mm) Number (Pieces) 6.0 619061-1 1200 per Reel 4.5 619062-1 1600 per Reel 3.5 619072-1 1600 per Reel All specifications subject to change. Consult Tyco Electronics for latest specifications. 33 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Standard Switching Coax Test Adapters Standard Switching Coax Test Adapters Features Test adapters are used in Test Jigs on mobile phone production lines to connect smoothly to the PCB Jack switch. This system allows a minimum of 100,000 cycles mating cycles. Applicable up to 3 GHz. Material and Finish Dielectric: PTFE Outer Shell: CuBe or similar, gold plated Center Contact: CuBe or similar, gold plated 35.0 22.0 13.0 Documentation 7.0 2.5 Drawing: C-619052, C-619068 6.62 Product Specification: 108-71000 ∅ 6.5 ∅ 3.4 Test Report: ∅ 10.0 501-19028 5.47 1/4″–36 UNS-2A Part No. 619052-1 35.0 22.0 13.0 7.0 2.5 6.62 ∅ 6.5 ∅ 3.4 ∅ 10.0 ∅ 8.18 5.47 1/4″–36 UNS-2A Part No. 619052-1 34 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Standard Switching Coax Right-Angle Cable Plug Standard Switching Coax Right-Angle Cable Plug Features Right-Angle cable plugs are used mainly for car kit application but can also be used in test jigs instead of test adapters. The integrated floating system allows smooth connection, able to capture tolerances up to 1.0 mm misalignment between phone and car kit with any risk of damaging the mobile phone. A minimum of 20,000 mating cycles can be done with this system. Various form and length can be offered. Cable to be used: RG 174, RG 316. 20.3 14.9 3.4 Material and Finish 11.0 Dielectric: PEEK Outer Shell: CuBe or similar, gold plated 3.4 ∅ 3.3 Center Contact: CuBe or similar, gold plated 3.1 Documentation Drawing: Part No. 5-619078-2 C-619078, C-619028 Package Quantity: 500 Pieces Product Specification: 108-71000 Test Report: 15.6 501-19028 12.1 10.92 6.62 1.65 ∅ 9.6 ∅ 3.4 ∅ 3.7 ∅ 3.9 5.47 Part No. 5-619028-2 Package Quantity: 500 Pieces For further models, please contact Tyco Electronics All specifications subject to change. Consult Tyco Electronics for latest specifications. 35 ∅ 5.8 1.0 (4x) Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Standard Switching Coax with ESD Proctection Standard Switching Coax with ESD Proctection Features These switching coax connectors are used for testing and setting the power of the phone on the production lines but also to make external switched connection in a car kit application to use an external antenna. This 3 connector types offer in addition an ESD protection which means that as long as the PCB connector is not connected to a test connector or a cable connec- tor, the center contact actuating the switch is grounded. The outer shell allows also a mis- alignment tolerance capture up to 1.0 mm in all direction. This system allows up to 20.000 mating/switching cycles. Two version available: Recommended PCB Layout Height of 6.3 mm and 4.1 mm 1.75 0.8 Coplanarity: 0.1 mm 1.75 Material and Finish 0.8 Dielectric: PEEK, natural color Outer Shell: 0.65 Steel gold plated Switch Contacts: 1.35 Stainless steel, selective plated Center Pin: Brass, gold plated ∅ 3.4 ∅ 5.0 ∅ 0.56 0.97 Documentation Drawing: 4.0 3.8 C-619201 and 619231 Product Specification: 1.8 108-71053 and 108-71063 Height Diameter Part Package Quantity Comment (mm) (mm) Number (Pieces) 619201-1 1600 per Reel – 4.1 5.0 619231-1 1600 per Reel In/Out 180° rotated Test Adapters and Cable Plugs to be used for all Standard switching Coax with ESD protection: Same as for Standard Switching Coax. 36 All specifications subject to change. Consult Tyco Electronics for latest specifications. 1.0 (4x) ∅ 4.4 ∅ 5.8 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors MID Micro Switching Coax MID Micro Switching Coax Features This very small switching coax connector is used for testing and setting the power of the phone on the Mobile Phone production lines. Applicable up to 6 GHz. This connector using MID tech- nology has only two components and allows a coplanarity value of max 0.08 mm. PCB surf. need: 3.0 x 3.0 mm Height: 2.5 mm Two types of mating connector offered: • Press-on for test jigs • Snap-on for hand testing 1.3 ∅ 3.0 3.0 Material and Finish 3.2 Dielectric / Outer Shell / Second Signal Contact: Two shot molded LCP selectively gold plated 1.12 0.46 0.46 0.92 Switch Contacts: 0.66 0.66 1.7 3.4 Stainless steel, gold plated 1.54 Documentation 2.5 Drawing: 0.8 (4x) C-619196, C-619210, C-619211 Product Specification: 108-71062 Recommended PCB Layout 3.0 SMD Switch: Part No. 619196-1 Package Quantity: 1,000 Pieces per Reel Right-Angle Cable Plug with Snap Fingers: Part No. 5-619211-1 Test Adapter: Part No. 619210-1 Package Quantity: 50 Pieces per Box All specifications subject to change. Consult Tyco Electronics for latest specifications. 37 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors MID Nano Switching Coax MID Nano Switching Coax Features This very small switching coax connector is used for testing and setting the power of the phone on the Mobile Phone production lines. Applicable up to 6 GHz. This connector using MID tech nology has only two components. By having the switch contact mounted inside the connector, only the MID outer shell is touch- ing the PCB. This allows remark- able coplanarity value of max. 0.06 mm. PCB surf. need: 2.7 x 2.7 mm Height: 1.7 mm Two types of mating connector offered: • Press-on for test jigs • Snap-on for hand testing Material and Finish Dielectric / Outer Shell / 2.7 Second Signal Contact: Two shot molded LCP selectively gold plated Switch Contact: Stainless steel, gold plated Recommended PCB Layout 2.7 ∅ 0.55 2.9 Documentation 1.55 0.4 Drawing: C-619213, C-619214, C-619217 Product Specification: 108-71065 1.0 0.93 ∅ 1.9 2.95 2.0 1.15 0.65 1.7 0.4 0.55 SMD Switch: Part No. 619213-1 Package Quantity: 8,000 Pieces per Reel Snap-On Test Adapter: Part No. 619217-1 • Spring loaded center contact Test Adapter: Part No. 619214-1 • Spring loaded outer conductor • Spring loaded center contact 38 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Spring Probe Connector (SPC) Spring Probe Connector (SPC) Features Spring Probe Connectors are widely used in the electronics industry. In mobile equipment they can be used in several applications such as antenna, charging/power, shielding and many other applications. Their proven design provides several advantages: • Relatively large stroke • Small Printed Circuit Board usage • Spring action in only one direc- tion (direction of movement) The Tyco Electronics spring probe connector portfolio contains a Package Contact vast variety of products with No. of Part Quantity Pitch Height Stroke Mating Type Battery Mating several heights, strokes, building Positions Number (Pieces) (Free) styles (verticall or right-angle), 1746730-1 1000 per Reel 3.00 3.30 0.90 Vertical (180°) Rotating (hinged) pin counts and pitches. 1746750-1 1500 per Reel 3.00 3.70 0.90 Vertical (180°) Rotating (hinged) 1279154-1 1000 per Reel 3.60 4.45 1.20 Vertical (180°) Rotating (hinged) 0900971-1 1000 per Reel 4.00 5.00 1.40 Vertical (180°) Rotating (hinged) 1612681-1 1000 per Reel 3.60 5.00 1.40 Vertical (180°) Rotating (hinged) Material and Finish 2 0900905-1 1000 per Reel 3.60 5.00 1.40 Vertical (180°) Rotating (hinged) Insulator: 1746931-1 1000 per Reel 3.00 5.10 0.90 Vertical (180°) Rotating (hinged) Thermoplastic, black color 0900795-1 1000 per Reel 4.00 5.70 1.50 Vertical (180°) Rotating (hinged) Probe Pin: 0900965-1 1000 per Reel 3.60 6.40 1.40 Vertical (180°) Rotating (hinged) Brass 0900712-1 1000 per Reel 3.00 6.90 1.50 Vertical (180°) Rotating (hinged) Body: 1705254-1 2060 per Reel 3.10 2.80 2.30 Right-Angle (90°) Sliding & hinged Brass 1612493-1 1000 per Reel 3.00 3.95 1.40 Vertical (180°) Rotating (hinged) Contact Plating: 1746751-1 1500 per Reel 3.00 5.50 1.50 Vertical (180°) Rotating (hinged) Nickel underlayer, 0.1 µm min. gold plating 1717400-1 1000 per Reel 4.00 6.30 1.40 Vertical (180°) Rotating (hinged) 1746116-1 1000 per Reel 4.60 6.35 1.25 Vertical (180°) Rotating (hinged) 3 1747103-1 1000 per Reel 3.45 4.15 1.70 Right-Angle (90°) Sliding & hinged 1717017-1 1000 per Reel 3.85 4.60 1.65 Right-Angle (90°) Sliding & hinged Documentation 1717257-1 1000 per Reel 3.50 3.95 1.40 Right-Angle (90°) Sliding & hinged Drawing: 1717029-1 1000 per Reel 3.50 4.43 1.70 Right-Angle (90°) Sliding & hinged See table 1717294-1 1000 per Reel 2.60 4.75 1.60 Right-Angle (90°) Sliding & hinged Product Specification: 1705130-1 1500 per Reel 2.50 5.00 1.50 Vertical (180°) Rotating (hinged) See drawing 1705030-1 1500 per Reel 2.54 3.60 1.00 Vertical (180°) Rotating (hinged) 1705795-1 1250 per Reel 2.54 5.60 1.50 Vertical (180°) Rotating (hinged) 4 0900688-1 1000 per Reel 4.00 5.50 1.40 Vertical (180°) Rotating (hinged) 0900988-1 1000 per Reel 4.00 5.50 1.50 Vertical (180°) Rotating (hinged) 1674783-1 1000 per Reel 4.00 5.70 1.50 Vertical (180°) Rotating (hinged) 1483960-1 1500 per Reel 2.54 4.10 1.00 Vertical (180°) Rotating (hinged) 1377269-2 1500 per Reel 2.54 5.00 1.50 Vertical (180°) Rotating (hinged) 1674977-2 1500 per Reel 2.90 5.15 1.25 Vertical (180°) Rotating (hinged) 5 1483940-1 1500 per Reel 2.54 5.20 1.40 Vertical (180°) Rotating (hinged) 1674977-1 1400 per Reel 2.90 6.65 1.25 Vertical (180°) Rotating (hinged) 1717989-1 1000 per Reel 3.70 2.90 1.65 Right-Angle (90°) Sliding & hinged 1746773-1 1000 per Reel 3.50 3.65 1.70 Right-Angle (90°) Sliding & hinged All specifications subject to change. Consult Tyco Electronics for latest specifications. 39 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Generic Battery Connector, 2 Positions Generic Battery Connector, 2 Positions Features Our Generic 2 positions SMT Battery Connector has an industry proven contact design that can be used in a wide variety of appli- cations. Two contacts can be used for one pad for redundancy reasons. Its small size and low cost make this connector ideal for low to medium volume requirements. This connector is also “in-line” stackable for multi position requirements. 6.2 1.0 Material and Finish Insulator: 7.0 4.25 1.85 LCP, glass-filled, black color Contact Pin: Phosphor bronze Contact Plating: Selectively plated gold over nickel 0.7 and tin on solder beam 4.1 2.0 Part No. 6337194-1 Documentation Package Quantity: Drawing: 550 Pieces per Reel C-6337194 4.8 Product Specification: 108-3419 1.5 Test Report: GB 39-99 0.4 0.85 Application Specification: 114-3211 7.0 4.25 1.0 Recommended PCB Layout 1.8 3.4 6.8 1.05 2.05 0.6 2.2 2.8 7.05 40 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors 1.6 mm Pitch Low Profile Battery Connector 1.6 mm Pitch Low Profile Battery Connector Features Because of their low cost, relia- bility and high current capacity, Leafspring connectors are ultimately suitable for battery connections. This connector series features a low housing height of 2.1 mm min. The product can be used with hinged or slided batteries and can carry up to 2 A at 250 V AC. Material and Finish Insulator: Thermoplastic, black color, LCP or equivalent UL 94 V-0 4.8 1.6 typ. 0.6 Contact Pin: Copper alloy 1.25 Contact Plating: 0.38 µm gold plating on contact area, gold-flash on solder area over 1.27 µm nickel 2.5 0.15 Documentation 1.0 0.1 Drawing: C-See table 7.0 Product Specification: 108-60035 Test Report: 1.2 501-5629 1.2 4.33 0.8 1.0 Recommended 1.25 PCB Layout 1.6 Housing Total Height Package No. of Pitch Height Uncompressed Part Number Quantity Positions (mm) (mm) (mm) (Pieces) 4 1.6 2.5 3.75 292331-1 1500 per Reel 2 1.6 2.5 3.75 292331-2 1500 per Reel 3 1.6 2.5 3.75 292331-3 1500 per Reel 5 1.6 2.5 3.75 292331-5 1500 per Reel 3 3.0 2.1 3.65 292448-1 1500 per Reel Bold Part Numbers have been tooled. 41 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Right-Angle Leaf Spring Battery Connector Right-Angle Leaf Spring Battery Connector Features Right-Angle Leaf Spring Battery Connector provides reliable battery interconnection for mobile handset application. Typical part numbers are shown below. For the custom sizes, please contact Tyco Electronics sales. Material and Finish Insulator: 12.0 6T PA, UL 94 V-0, black color Contact Pin and Solder Pegs: 10.9 Copper alloy 0.7 1.2 Contact Plating: 1.27 µm min. nickel underlayer, 1.0 µm min. gold at contact side 11.0 0.05–0.13 µm gold at solder side 2.2 Solder Peg Plating: 9.6 Ref. ∅ 1.2 2.0 7.4 1.0 µm min. nickel underlayer, 7.5 1.0 µm min. tin plating 2.2 1.0 3.2 3.0 10.5 Documentation 7.9 Drawing: See table 5.0 Product Specification: 1.72 1.5 See drawing 2.4 1.8 3.0 6.3 6.9 3.9 Recommended PCB Layout 1.9 1.8 Package Contact Total Mount Size No. of Part Quantity Pitch Height Height Width x Depth Finish Positions Number (Pieces) (mm) (mm) (mm) 1717273-1 500 per Reel 3.0 3.9 6.3 10.5 x 8.6 Ni + Au 1717406-1 500 per Reel 3.0 5.0 7.7 10.5 x 7.4 Ni + Au 1717413-1 500 per Reel 3.0 4.5 6.9 10.5 x 7.4 Ni + NiPd + Au 1717562-1 500 per Reel 3.0 4.5 6.9 10.5 x 7.4 Ni + NiPd + Au 1717838-1 40 per Tray 6.5 6.6 11.50 20.0 x 5.0 Ni + Au 3 1746142-1 500 per Reel 3.2 3.5 6.5 12.4 x 3.7 Ni + Au 1747129-1 500 per Reel 3.0 4.4 6.7 10.3 x 4.9 Ni + NiPd + Au 1827000-1 40 per Tray 6.5 10.40 17.10 19.9 x 2.6 Ni + Au 1827928-1 400 per Reel 3.0 05.75 7.6 11.2 x 2.5 Ni + Au 1871813-1 500 per Reel 2.7 3.9 6.0 10.3 x 4.7 Ni + NiPd + Au 42 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Battery Block Battery Block Features This battery concept allows for a stable battery connection in any circumstances. The plug side, which is mounted in the equip- ment, connects to the special connector in the battery. The battery side connector is equipped with two contact points per contact. The U-shaped contact always keeps the forces in the connector. The special construction of the connector allows for hinged or sliding mating of the battery pack. The small size of the complete 0.7 0.7 system makes it ultimately suit- 6.6 able for mobile applications. Receptacle: Part No. 1612901-1 1.2 Package Quantity: 3.0 1700 Pieces per Reel 4.0 Material and Finish Insulator: 2.0 0.7 Thermoplastic, UL 94 V-0, black color 7.4 PCB Layout Contact Pin: 2.0 Copper alloy 2.0 3.0 Contact Plating: Selectively plated gold over nickel and gold-flash in solder area 2.75 2.6 ∅ 0.75 0.55 0.55 1.5 1.55 0.6 Documentation 0.5 Drawing: C-Part No. 6.5 Product Specification: 5.5 108-5846 Test Report: Plug: Part No. 1612898-1 501-5452 Package Quantity: 75 Pieces per Tube 4.8 3.4 4.4 Plug: 2.0 4.9 Part No. 1612898-1 2.0 Receptacle: 2.0 2.0 2.2 Part No. 1612901-1 ∅ 0.75 ∅ 1.4 5.4 1.8 3.8 5.3 ∅ 0.8 2.6 1.6 0.9 1.8 5.9 0.5 PCB Layout All specifications subject to change. Consult Tyco Electronics for latest specifications. 43 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Inboard SMIA 85 Camera Socket Inboard SMIA 85 Camera Socket Features Inboard SMIA 85 Camera socket according to the SMIA standard. For camera modules with 8.5 x 8.5 mm footprint. • Fully-shielded camera socket • Inboard allows for “flat” phone design • Grounding fingers to camera module • Keying feature and optical identification feature • Large pick and place possibility inside • Grounding clips Material and Finish Insulator: LCP, black color Contact Pin: Phosphor bronze Part No. 1857258-1 Contact Plating: Package Quantity: Selectively plated gold over nickel 800 Pieces per Reel Shields: Phosphor bronze Top Shield Plating: 11.2 13.8 Selective gold over nickel Bottom Shield: 0.9 Tin over nickel 0.8 0.95 Documentation 0.25 1.1 Drawing: C-1857258 10.2 8.3 14.1 Product Specification: 11.8 13.1 108-19297 10.8 Application Specification: 114-19101 3.05 0.5 5.45 10.3 13.3 PCB Layout 44 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Onboard SMIA 85 Camera Socket Onboard SMIA 85 Camera Socket Features Onboard SMIA 85 Camera socket according to the SMIA standard. For camera modules with 8.5 x 8.5 mm footprint. • 4x camera module locking clips • Grounding to the camera by clips • Overmolded contacts • Keying and optical identification feature Material and Finish Insulator: PA, black color Contact Pin: Phosphor bronze Contact Plating: Selectively plated gold over nickel Shields: Copper alloy Shield Plating: Part No. 1857346-1 Selective gold over nickel Package Quantity: 1000 Pieces per Reel Documentation 10.3 10.55 Drawing: C-1857346 Product Specification: 108-19297 Application Specification: 114-19101 10.0 9.4 10.6 1.6 9.5 5.03 0.4 10.3 PCB Layout All specifications subject to change. Consult Tyco Electronics for latest specifications. 45 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Super Low Profile (SLP) Connector Super Low Profile (SLP) Connector Features This super low profile cable-to- board connector requires very little space for high density and small size mobile electronics. For your one stop shoping, various cable assemblies are provided to best suit your appli- cation. Applicable Cable Wire Size: AWG 32 Diameter: 0.39 mm Material and Finish 5.7 Insulator: PCB Layout 3.3 Thermoplastic, Black (Board Connector), Beige (Receptacle Connector) Contact Pin: Copper alloy 1.6 3.58 3.9 Contact Plating: Board Connector: 1.3 µm min. nickel underlayer, 5.3 0.3 µm min. gold at mating side 0.05–0.20 µm gold at solder side Receptacle Connector: 1.6 Gold plating 0.8 Board Shields: Connector 1.4 Copper alloy 1.7 Shield Plating: Selective gold over nickel 3.2 2.3 0.3 1.5 Documentation Drawing: See table Product Specification: 108-5822 Test Report: 2.05 3.55 501-5593 Application Specification: 114-5357 0.8 Cable Assembly (Example) 1.33 1.1 Plug: Part No. 1612537-1 Receptacle: Part No. 1612534-1 46 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Micro SLP Connector Micro SLP Connector Features This connector is applied for interconnection to speakers, receivers or other small devices in Mobile equipment. • Low Profile, Mating Height = 1.4 mm • Contact Pitch = 0.8 mm • Applied Wire Size: AWG 32 • Double slot mass termination • Double latch concept, contact and housing • Special latch design ensures good tactile feedback • Size (H x W x L): 1.4 x 2.85 x 4.66 mm • Design ensures contact protection during mating Material and Finish Insulator: Thermoplastic resin Contact Pin: Phosphor bronze 2.65 Contact Plating: 0.3 µm gold over 1.3 µm nickel in 4.4 contact area, gold-flash plating in solder area Shields: 2.85 1.0 Copper alloy 1.1 2.85 Shield Plating: Selective gold over nickel 4.3 0.8 Documentation Drawing: 0.7 C-See table 1.1 1.4 Product Specification: 1.5 108-78466 2.95 4.7 Test Report: PCB Layout See Product Specification Application Specification: 114-5426 Cable Assembly Plug: Part No. x-1981812-x Receptacle: Part No. 1981813-1 Package Quantity: 4000 Pieces per Reel All specifications subject to change. Consult Tyco Electronics for latest specifications. 47 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors STAX™ LD Elastomeric Connectors Product Facts STAX™ LD Elastomeric Connectors Surface-to-Surface Compression Connection for Board Stacking Applications ■ Single piece compression connector ■ Contact pitch as lows as 0.8 mm ■ No. of rows of contacts: 1 through 5 (two rows shown to the right) ■ No. of Contacts: 1–200 ■ Board Separation: 0.5–8.0 mm ■ Shielding Capability ■ Performs in high-speed applications (3 GHz) ■ Low resistance ■ Current Capability: 1 Amp typical with higher capability possible with modification ■ Easily modified standard designs ■ Facilitates automatic assembly, rework, and field upgrades ■ Compatible with tin and flash gold contact metallurgy ■ Rugged and reliable Dual-Row STAX Connector connects two rows of contact pads. Retention slot is provided in PCB separator. Elastomeric connectors are Tyco Electronics maintains Modifications & Options How STAX Elastomeric viable in most applications complete control over the Connectors Work The flexible elastomeric where traditional board-board quality and performance of the manufacturing process STAX elastomers are zero connectors are used. The product. The STAX product allows a fast, easy modifi- insertion force connectors applications may include high line is manufactured from basic cation of the products to that do not require soldering. speed, power, digital, ground- raw materials (silver or gold, suit the individual needs They provide a compliant ing/shielded interconnect. and silicone) using a proprie- of the application. Typically surface-to-surface com- tary manufacturing process. with an elastomer-only The elastomer is a single piece pression connection when solution there is no tooling. compression technology. The The result is a connector deflected between opposing There are requirements silicone within the connector technology that allows the mirror-image pad patterns. for minimum production provides the normal force freedom of design without the volume. (spring). The conductive layers traditional limitations of stand- (blend of silicone and silver ard product availability. There particles) make redundant is no need to compromise electrical contact to the pads the end product at the design on the board. stage. The STAX LD technology is Mechanically, the elastomeric based upon 30 years of capabilities are flexible. The experience in manufacturing technology can meet PCB and in the hundreds of millions area requirements in appli- of connectors used in trouble- cations of board separations free applications. This is a low under 8.0 mm. Electrically, durometer and low contact resistance and current ratings resistance product. are competitive with most alternative technologies. 48 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors STAX™ LD Elastomeric Connectors (continued) STAX elastomers are com- your application? Smaller 1. Determine if an application engineers are posed of alternating layers of height, higher I/O, greater cur- Elastomeric Connector avail-able to assist in: conductive and non-conduc- rent capacity, lower resistance, is appropriate for the • Defining customer furnish- tive silicone rubber. Silicone less PCB area are all modifi- Application ed housing requirements. rubber is the base material cations that can be made. • Providing design input for: a) Board-Board separation ■ because it has excellent aging • Alignment 3 – Fast >8.0 mm? ■ properties, chemical stability, • Deflection The flexible elastomeric manu- An elastomer cost is tied ■ electrical reliability, and super- • Pad layout facturing process allows quick closely to material usage ■ ior performance in shock and • Final elastomer dimen- turn on prototypes (1 week) (precious metals). In appli- vibration. It also provides a sions to test solutions and rapid cation greater than 8 mm gasket-like seal to protect the ramp on production. Proto- elastomers lose their price contact surfaces. types are made with the same competitiveness. 3. Can Tyco Electronics process as production. supply a complete The conductive layers consist b) X-YAlignment (>±0.25 mm)? Connector Solution? of tiny metallic particles 4 – No Tooling Unlike a mechanical male- dispersed in silicone rubber. An elastomer-only approach female connector an elas- Yes. These solutions can Within each of the conductive allows the customer to imple- tomer cannot perform the take the form of simple layers, the metallic particles ment the housing and align- alignment of the system. holders with STAX connec- create thousands of conduc- ment features within existing The reference drawings tors held in place by: tive paths. Therefore, each plastic or metal structure. show how pins can provide • Localized interference conductive layer provides Modifications of elastomer satisfactory alignment. • In-molding multiple points of contact at length, height, and width do Other methods can achieve • Grafting the substrate interface. While not require tooling. the same result. the conductive layers ensure The holder or frame can be 5 – Reliability c) Sliding Contact? contact between mating pads, plastic, silicone rubber, or Tyco Electronics elastomeric Silicone by the nature of the non-conductive layers metal and typically has low products have been tested to the product has a high co- isolate the conductive layers tooling investment: the following: efficient of friction. Sliding a from each other. The alter- Below are examples of contacting surface across nating STAX construction, • MIL STD-1344 complete connection solutions the elastomer will not be 200 conductive layers per inch • IEC-68-2 in challenging applications. reliable. (8 per mm), allows multiple • EIA-364 conductive layers to make • MIL STD-202 d) Contact Pitch: <0.8 mm? contact to a single contact • JIS C 0020 Since an elastomeric con- pad while the non-conductive • JEIDA 38 nector depends on the align- layers electrically isolate • INTEL SPEC 5.1, 5.2 ment of the mating surfaces adjacent contact pads. • NUMEROUS CUSTOMER by an external means, con- ACCELERATED LIFE tact pitch <0.8 mm is not The advantage of this material TESTING (ALT) easily achievable. However, construction is that you Circular Connector Grafted board real-estate is minimi- achieve 3–4 conductive layers Test data available on request. 160 Pos. (LCP Frame) zed by achieving more typically making contact to a 6 – Product Support closely-spaced rows of con- single contact pad on the Tyco Electronics product tacts pads than fine-pitch board. A single elastomeric engineers work directly with connectors. strip (element) is used to con- customer engineering teams nect an entire row of contacts. on modifications and custom 2. Determine if “holder” The multiple layers coupled solutions for volume applica- Ultra-Low Profile Inmolded functions can be inte- with the thousands of con- 8 Pos. 0.5 mm Height Silicone tions. All aspects of the design grated within existing Rubber Base ductive paths in each layer and implementation of the structure? ensure reliable interconnect. product are reviewed to ensure a successful product launch. The holder is synonymous with the plastic that sur- Why use a rounds traditional mecha- Tyco Electronics Custom Capability nical connectors. The most Elastomeric Connector efficient and cost effective Application requirements vary way to implement a STAX 1 – Simple Implementation dramatically across the many connector is by incorpora- Assembly is easy as making industries that elastomers are ting a retaining slot into an a sandwich. There is no used. The technology is existing housing or board soldering, no special tooling flexible in adapting to many separator as shown on the or machinery. of these requirements but, as reference designs. with any product, there are 2 – Easily Modified Module-to-Board Grafted limits. In an approved application, How often is a standard off- 220 Pos. Peripheral Contact Elastomeric Technologies the-shelf connector ideal for Ultem Frame All specifications subject to change. Consult Tyco Electronics for latest specifications. 49 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors STAX™ Array Connector STAX™ Array Connector Features Allows connection to non-stan- dard pad patterns without tooling and long lead time for custom connector. • Long term reliability and durability • Economical • One piece connector • Custom prototype samples within 1 week Physical Properties Height: 0.5–1.5 mm Minimum Pad Pitch: 0.8 mm Individual Conductor Width: 0.063 mm Individual Conductor Length: The STAX Array connector is an anisotropic conductive mat material that was developed to 0.25 mm interconnect land grid array pad patterns as well as random, circular or other non-linear circuit board pad patterns. As long as the material is deflected between two mating mirror image pad patterns electrical connection is made between the mirror image pads. Using our core competency in laminating silicone, the Tyco Electronics Elastomeric Technologies Typical Electrical Properties product line has created a mat material having .063 mm (0.0025″) x 0.25 mm (0.010″) conductive 1) Contact Resistance : silicone segments surrounded on all sides by 0.063 mm thick nonconductive silicone insulation. 50 mΩ As long as a minimum of 0.4 mm separation is maintained between adjacent pads on the mating Dielectric Constant: surface, shorting is avoided. 3.1 STAX array connectors are very easily customized to the users required dimension and can be 1) Insulation Resistance : made in either rectangular or die-cut shapes. Z-axis thicknesses between 0.5 mm and 1.5 mm 12 10 Ω min and dimensions from 2 mm x 2 mm to 60 mm x 60 mm can be accommodated. 1) Dielectric Withstanding Voltage : 1000 V without breakdown or arcing 1) Current Carrying Capacity : 0.5 A Deflection Force: 2 0.5–1.5 Newtons/mm Environmental Parameters Operating Temperature: –40 ºC to +125 ºC Moisture: 0 to 100% RH Test Report: TR 368 1 ) Elastomer: 1.0 mm (0.039″) high. Boards: Gold plated contact pads 0.5 mm (0.020″) wide on 1.0 mm (0.039″) pitch. Part No. 3-1442003-2 50 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Elastiboot™ Connectors for Microphones Elastiboot™ Connectors for Microphones Features • Boot and STAX elastomeric connector are together as one inseparable piece. • Elastiboot allows microphone to be provided as an assembly complete with acoustic boot and STAX compression-style connector. • Large deflection range of 5 thru 50%. • Standard Elastiboots available for smaller industry-standard leadless microphones of 4.0 and 6.0 mm diameter. • Elastiboot uses reliable, The Tyco Electronics line of Elastiboot connectors combines an elastomeric connector with an superior performing Tyco Electronics STAX elastomeric acoustic grommet or “boot” for industry standard 4.0 and 6.0 mm diameter leadless microphones. compression connectors. In a continued effort to lower the cost of hand-held electronic devices, high volume manufacturers • Custom, application specific are looking for value added sub-assemblies from their component suppliers. designs can be created. Elastiboot connectors from the Tyco Electronics Elastomeric Technologies product line fill this need by providing ease of assembly in connecting small form-factor microphones to host PCBs. Elastiboots combine the connector with the acoustic grommet (or “boot”) to create a one-piece, orientation free subassembly. Physical Properties Elastiboot connectors make assembly of microphones into portable electronic devices economical Height: and robust. See chart Minimum Pad Pitch: ■ Microphone is placed into See PCB drawings Elastiboot connector. STAX Conductor Width: ■ Elastiboot/Microphone as- 0.064 mm (.0025″) sembly is placed in cavity in front housing of mobile unit. STAX Conductor Pitch: 0.127 mm (.005″) ■ Makes blind-mate connec- tion to concentric-ring pads Elastiboot with Seal Ribs Elastiboot without Seal Ribs on PC Board during final assembly of unit. Environmental Parameters ■ Concentric-ring pad layouts Operating Temperature: allow for orientation-free –40 ºC to +125 ºC assembly. Moisture: ■ Elastiboot connector cap- 0 to 100% RH tures microphone while Test Report: providing electrical connec- Typical PCB Pattern for Typical PCB Pattern for 4.0 mm Diameter Microphone 6.0 mm Diameter Microphone TR 341 tion and acoustic sealing. Microphone Dimensions for Cavity in Host (above) Outer Diameter/ (mm) Part Number STAX Type Seal Ribs Thickness Diameter Max. Cavity Depth Mated Height (mm) 2-1442003-2 4.0 / 1.0 LD Yes 5.17 1.60 5.26 6-1442001-3 4.0 / 1.85 LD No 5.12 2.60 5.37 9-1442002-7 6.0 / 1.0 Gold Yes 7.37 1.35 7.46 5-1442003-9 6.0 / 1.0 LD Yes 7.37 1.35 7.46 1-1442002-5 6.0 / 1.3 SD Yes 7.50 1.70 7.65 9-1442000-8 6.0 / 1.5 SD Yes 7.50 2.26 7.66 8-1442001-6 6.0 / 2.2 LD No 7.30 2.30 7.44 6-1442001-0 6.0 / 2.2 LD Yes 7.50 2.30 7.50 All specifications subject to change. Consult Tyco Electronics for latest specifications. 51 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors STAX™ Elastomeric Connectors for COG LCDs STAX™ Elastomeric Connectors for COG LCDs Features • Easily customized. • Connects display glass or flex circuit to PCB. • Inhibits movement of the con- tact interface during vibration. • Stable electrical performance over a wide working range of deflection. • Can accommodate glass-to- board separations of as little as 0.25 mm. Low resistance STAX elastomeric connectors are the best means of connecting to Chip-on-Glass • Applications engineering sup- and other types of LCD modules. Gold STAX and STAX LD elastomeric connectors are easily port from Tyco Electronics to customized without the tooling charges and lead times typically found with stamped contacts incorporate STAX elastomeric and molded insulators. They can be retained in a slot incorporated into the light guide that allows connectors into your product. Support includes board layout, for automatic placement of the light guide subassembly. slot definition, alignment and STAX connectors provide a gasket-like contact interface to the compression. ITO traces thereby sealing the interface from the environment. • In-molded sub assemblies can At the same time, the compliant sealing properties of the silicone be created to combine LCD elastomeric connector maintain intimate conformal contact to connector with backlighting the ITO surface. connection while providing orientation features. STAX connectors have proven reliability in COG LCD displays for cell phone units – numbering in the hundreds of millions. Physical Properties STAX LD – Force vs Deflection vs Resistance Curve Height: 0.5–12.7 mm (.020″–.500″) Minimum Pad Pitch: 0.50 mm (.020″) Conductor Width: 0.064 mm (.0025″) Conductor Pitch: 0.127 mm (.005″) Typical Electrical Properties Contact Resistance: See chart Dielectric Constant: 3.1 : Insulation Resistance 12 10 Ω min 1) Gold STAX – Force vs Deflection vs Resistance Curve Dielectric Withstanding Voltage : 1000 V without breakdown or arcing Current Carrying Capacity: 1 Amp Environmental Parameters Operating Temperature: –40 ºC to +125 ºC Moisture: 0 to 100% RH Technical Documents Engineering Test Report: TR 341 52 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors SMT-ETI-1 STAX™ Connector SMT-ETI-1 STAX™ Connector Features • Surface Mount / Pick-n-Place • Tape & Reel or Bulk Packaging • Low Resistance: 20 µOhm • Deflection Range: 5–65% • Long term reliability and durability • Economical • Readily customized (Hd: 1.0 to 2.25 mm ) • No tooling required • One-piece connector • Quick delivery custom proto- type samples Tyco Electronics Elastomeric Technologies™ continues to demonstrate technology leader-ship with the introduction of the INDUSTRY’S FIRST surface-mount elastomeric connector product. Physical Properties The SMT-ETI-1 is a dedicated single position connector used in lieu of a spring-finger, pogo-pin, Deflected Height: or compliant materials in portable electronic and communication devices. The applications include 1.0–2.5 mm (.039″–.098″) grounding, power connection, and shielding to eliminate EMI and RFI. Minimum Pad Pitch: 3.0 mm (0.120″) The SMT-ETI-1 is an integration of Tyco Electronics’ ETI and 3.4 Elastomer Width: MID technologies: 1.00 ±0.10 mm ■ The surface mount holder is a gold plated plastic and Elastomer Length: 1.0 2.5 provides a low profile – small form factor “standard” base. 1.95 ±0.15 mm Conductor Pitch: ■ A STAX™ HT (high temperature resistant) elastomer is 0.127 mm (.005″) grafted into the SMT holder for a single-piece assembly. Pad Dimensions: See below A STAX™ elastomer has the widest range of deflection in low profile connection (5 thru 65%) while maintaining consistent performance and reliability. Combining the standard base with the flexibility of the elastomeric manufacturing process allows Part No. 1-1442004-7 Typical Electrical Properties for an optimized connector for each application. 1) Contact Resistance : This minimizes the deflection forces while compensating for 20 mΩ 1.5 z-axis tolerances. The silicone provides the normal force of the 1) Current Carrying Capacity : connector, seals the contact interface, and even conforms to 2 Amps irregular surfaces. Standard parts are available – modifications 1 ) Test Boards: Gold plated contact pads 2.4 can be easily created. The electrical characteristics of the SMT-ETI-1 rival all competitive technologies in resistance and current carrying capacity. Top PCB Contact Pad Environmental Parameters The SMT-ETI-1 STAX connector features silver particles (Flash-Gold) Dimensions embedded within a low durometer silicone. Within each of the Operating Temperature: conductive layers, the conductive particles create thousands –40 ºC to +125 ºC 2.5 of conductive paths. Each conductive layer provides multiple Moisture: points of contact to the substrate interface. 0 to 100% RH The pitch of the conductive layers is only 0.127 mm (0.005″), 3.4 allowing multiple conductive layers to make contact to each substrate pad. Technical Documents Qualification Test Report: Bottom PCB Contact TR 371 Solder Pad Dimensions All specifications subject to change. Consult Tyco Electronics for latest specifications. 53 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors STAX™ Coax Connector Tyco Electronics’ STAX coax connector is STAX™ Coax Connector the first surface mount RF coax connector Features on the market that uses elastomeric con- nector technology to provide an economi- • Low cost, low height and high cal means to achieve low board separation performance while maintaining excellent RF signal • Low insertion loss 0–0.5 dB integrity between PCBs. from 0–6 GHz • VSWR <1.07 from 0–6 GHz The connector uses laminated sections of • Wide working range of deflec- conductive and non-conductive silicone that tion are tuned to provide a 50 ohm impedance • Long term reliability and dura- line between mated substrates. bility The single piece construction of the STAX coax connector eliminates some of the signal anomalies • Surface mount / pick and place normally associated with mated pairs of metal contact coax connectors. The dimensional rela- • Low board separation <2.5 mm tionship of the inner and outer conductor is consistently maintained throughout the connector. • Technology can support board separations <1.5 mm With its metal holder, the STAX coax connector can be surface mount soldered to the PCB. An additional metal SMT holder aligns the connector to the mating PCB. If adequate PCB alignment • Easily modified free height is already maintained by other means, the coax connector may not need the additional mating • No tooling required for height receptacle and can become a blind-mating connector. This has an additional advantage in space modifications constrained mobile applications where very fine-pitch board-to-board connectors are also used. • Modified prototype samples within 2 weeks 619229-1 SMT STX Coaxial Connector Assembly PCB Pattern Physical Properties Board Separation: 2.5 mm ±0.2 (Standard Part) Center conductor PCB Board Area: Dielectric material board Outer conductor 4.0 mm diameter Solder ring Environmental Parameters Solder mask Operating Temperature: –40 ºC to +125 ºC Moisture: 0 to 100% RH Conductive elastomer outer conductor Electrical Properties Conductive elastomer inner conductor Non-conductive elastomer Contact Resistance: <50 mΩ Insulation Resistance: 619238-2 SMT Mating Target Holder PCB Pattern for Mating Target 12 10 Ω min Dielectric Withstanding Voltage: 1000 Volt Center conductor Technical Documents Dielectric material board Outer conductor • Qualification Test Report – TR 368 Solder ring • RF Performance Report – 00266 Solder mask Part No. 619229-1 STAX SMT Coax Connector Assembly: Consists of STAX coax elastomer in round SMT holder. Part No. 619238-2 Mating SMT Target Holder: Controls alignment between PCBs Part No. 1442004-1 STAX Coax Elastomer only: Used with customer furnished holder 54 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Connectors Vibration Motor Connector Tyco Electronics’ vibration motor Vibration Motor Connector elastomeric assembly is an innovative Features option to standard motor attachment methods using our proven STAX™ • Flexibility to modify the layered elastomeric connector standard product offering to product line. meet custom applications • Eliminates obsolete inventory Hundreds of millions of our STAX due to changing application family of connectors have been used requirements to connect flex circuits, LCD’s, micro- • Minimize PCB space phones, and speakers within space- • Eliminates fretting corrosion constrained products such as mobile issues phones, pagers, PDAs and disk • Enables single piece assembly drives. This solution allows the com- pression mate of a vibration motor to • Eliminates troublesome solder- almost any printed circuit board. ing of wires or use of male / female connectors The STAX connector consist of • Eliminates the need and time alternating layers of conductive and to tool many different spring non-conductive silicone. contacts These layers are typically 0.064mm thick on 0.127 mm centers and make redundant surface-to- • Economical surface connection when deflected between the flat contact pads on the vibration motor to the • Long term reliability and main PC Board. Vibration motor connectors provide a excellent combination of electrical perform- durability ance, reliability, functionality and durability. • Custom prototype samples within 2 weeks Physical Properties Application Deflected Height: 8.7 ±.02 mm (.342 ±0.008″) Compression Force: 0.4 kg (nominal deflection) Grommet Material: Silicone Rubber (55 Shore A durometer) Typical Electrical Properties Standard Voltage: 1.3 V DC Rotating Direction: Clockwise Standard Load Rotation: 9000 ±2000 Standard Load Current: 105 mA Starting Current: 130 mA max Insulation Resistance: 1 Mega Ohm Environmental Parameters Part No. 6-1442002-7 Vibration Motor Connector Assembly Operating Temperature: Part No. 7-1442002-3 Rubber Vibration Motor Boot –10 ºC to +60 ºC Part No. 7-1442002-2 Sanyo Motor # RS-2561 Moisture: Part No. 7-1442002-1 Elastomeric Silver STAX™ Connector 0 to 100% RH All specifications subject to change. Consult Tyco Electronics for latest specifications. 55 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Engineering Notes 56 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Antenna Products Antenna Manufacturing Capabilities Tyco Electronics Antenna Products combines world class antenna design competency with unsurpassed integration and optimization skills to provide the best integrated solutions for various applications. Our global footprint and wide variety of manufacturing technologies allows our customer s to be able to choose from a large base of manufacturing technologies and factory locations. Applications Voice Tyco Electronics Antenna Products provides handset OEM’s with the highest performing, lowest cost embedded antenna solutions. With over 500 million Tyco Electronics cellular handset antennas designed and manufactured to date, we offer the worldwide spectrum of frequencies required to support cutting edge embedded antenna solutions. In addition to the handset segments, the digital cordless telephone segment presents secondary voice capability for Tyco Electronics. As this market continues its evolution into the 900 MHz and 2.4 GHz frequency bands, Tyco Electronics Antenna Products is positioned to provide cutting-edge embedded antenna solutions. Data Rapid growth in the wireless data market is creating unprecedented demand for embedded antenna solutions. With the proper antenna, these devices can offer “any time” wireless access. Data devices that utilize Tyco Electronics Antenna Product embedded antennas are PDAs, laptops, access points, bar code scanners, compact flash cards, PC cards, printers, print servers, cameras, etc. The Tyco Electronics Antenna Products Group has developed an entire line of high performance, low cost embedded antennas for wireless data applications. Tyco Electronics has a variety of cutting-edge " off the shelf” and customized embedded solutions for virtually any wireless device. Covering 802.11a/b/g/n, WLAN, WWAN, WiBro, WiMAx, WiFi, DVB and UWB applications. Bluetooth Bluetooth is revolutionizing the communication industry. It facilitates fast and secure trans- missions of voice and data even when devices are not within line-of-sight. Devices include mobile phones, computers, cameras, printers and virtually any device that has information to communicate. The Tyco Electronics Antenna Products Group is at the forefront of Bluetooth antenna development with a number of standard antenna products that are already being utilized in the first generation Bluetooth devices on the market. All specifications subject to change. Consult Tyco Electronics for latest specifications. 57 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Antenna Products Antenna Manufacturing Capabilities Three Key Technologies MID (Molded Interconnect Device) Antennas In 2000, Tyco Electronics acquired Molded Interconnect Device, LLC (MID). Now part of Tyco Electronics Antenna Products, MID is headquartered in Rochester, NY and prides itself in being the world’s leader in utilizing its technology to make everyday products better. With over 500 million parts in service, our products are being utilized in applications ranging from joysticks to cell phones as well as minivans to airplanes. In its most basic form, MID technology can be defined as any product that results in selectively plated plastic parts. This technology results in outstanding repeat- ability, which is ultimately suitable for the design and production of complex shaped antennas. MID Two Shot Antennas ■ Design flexibility for 3D patterning ■ Fewest manufacturing steps and processes ■ Repeatability of manufacturing process ■ Ability to integrate multiple functions ■ Flexible manufacturing capacity ■ Manageability of demand increases ■ Simple low cost standardized interconnect utilized ■ Best utilization of the 3D space that is available ■ Tightest tolerances for pattern registration Stamped Metal and Overmolded Tyco Electronics Antenna products has developed a line of low profile, high performance Stamped Metal embedded antenna solutions for single-, dual-, tri-and quad-band applications. Tyco Electronics Stamped Metal antennas offer OEMs, a low cost and highly repeatable manu- facturing solution, in a number of standard “of the shelf” and customized antenna designs. Our stamped embedded antennas address the needs of a variety of applications from 400 MHz to 5 GHz such as; mobile phones (AMPS, TDMA, CDMA, WCDMA, PCS, DCS and GSM), cordless telephones, personal digital assistants (PDA), laptop computers, global positioning system (GPS) devices and wireless networking (Bluetooth, 802.11 and ISM). Stamped Antennas ■ Stamped and heatstaked ■ Stamped and overmolded ■ Pure stampings ■ Typically the lowest cost antenna technology when considering the interconnect cost as well ■ Interconnect can be designed in (contacts) ■ Production die is high volume capable ■ Hand assembly stations can be added for volume upswings 58 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Antenna Products Antenna Manufacturing Capabilities FPC and Printed Wiring Boards (PWB) Antennas The Tyco Electronics Antenna Products Group has developed a line of low profile, high perform- ance Print Wiring Board (PWB) antenna solutions for single-, dual-, tri-and quad-band applications. Allowing virtually any wireless product to operate on different frequencies without multiple antennas. Our FPC and PWB antenna solutions address the need of a variety of applications: mobile phones (AMPS, TDMA, CDMA, WCDMA, PCS, DCS and GSM), cordless telephones, personal digital assistants (PDA), laptop computers, global positioning system (GPS) devices and wireless networking (Bluetooth, 802.11 and ISM). FPC and PWB Antennas ■ Pure FPC/PWB ■ FPC on a carrier ■ Best flexibility for pattern changes during production ■ More ability to quickly tool to higher demand during production All specifications subject to change. Consult Tyco Electronics for latest specifications. 59 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Antenna Products RF Engineering Capabilities Antenna Design at Tyco Electronics Tyco Electronics gets the optimal performance out of antennas by applying system-level integra- tion and optimization design expertise to each wireless application. Our practical application and simulation skills are second to none with global expertise in the U.S., Europe, and Asia. Our global presence places antenna design experts next to the customer. Modeling and Simulation 3D Part Design at Tyco Electronics Modeling and Simulation Need info ■ Pro Engineer Wildfire 2.0 CAD software ■ Auto CAD 2005 ■ MPA Moldflow to predict moldings behaviors ■ Pro Mechanica stress and thermal analysis software Customer Support and Design Integration Tyco Electronics provides world class antenna design integration and optimization to its cus- tomers. Tyco Electronics prides itself in working with customers to optimize not only the antenna performance but also the total system performance. The earlier that Tyco Electronics can be involved in an integration project, the more opportunities there will be to deliver the most optimal solution. Six Step Integration Process ■ Evaluation: Is the customer’s expectation reasonable? ■ Modeling: Utilizing Ansoft HFSS ■ Rapid Prototyping: Are we making electrically working samples or just dummy mechanical samples? Prototypes can be made in 1 week. ■ Testing & Optimization: Do we have the real device and is it the latest version? ■ Production: Pick the manufacturing technology after the design is developed and fully understanding our customer’s goals ■ Quality Assurance: Our quality focus is inherent throughout the entire design process and product life cycle. 60 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Antenna Products RF Engineering Capabilities RF Engineering Capabilities ■ Six Anechoic Chambers ■ One Satimo Near Field Spherical Measurement Chamber ■ Satimo Upgrade for mobile phone compliance testing ® ■ Narda SAR Measurement Equipment FEM Electromagnetic Modeling (Ansoft HFSS) ■ One CTIA compliant 3D test chamber ■ Network analyzer to 20 GHz for Laptop programs RF Engineering Locations: ■ US ■ China ■ Japan ■ Taiwan ■ Korea ■ Europe Aptos, California All specifications subject to change. Consult Tyco Electronics for latest specifications. 61 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Engineering Notes 62 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 MID Technology MID MID Technology Two Shot MID Technology at Tyco Electronics Two Shot ■ Sequential injection molded substrate Tyco Electronics prides itself ■ A plateable resin and a non-plateable resin in being the global leader in ■ Imaging in the molding process providing Molded Interconnect Technology (MID). In it’s most ■ All electroless plating of catalyzed surfaces basic form, MID technology can be defined as any product that results in selectively plated plastic parts. This technology can be used in three basic ways, to solve 3-dimensional electro-mechanical problems, for shielding purposes, or to develop antennas. MID Technologies Tyco Electronics can manu- facture MID parts using three manufacturing technologies, Two Shot, Laser Imaging, and Laser Direct Structuring. Laser Imaging MID Technology Laser Imaging today is typically only used for rapid prototyping ■ Manufacturing using a circuit board production type process ■ Machine or single shot mold in 3–10 days ■ Laser image circuitry in 3–5 days ■ Circuitry and plating are accurate to production processes All specifications subject to change. Consult Tyco Electronics for latest specifications. 63 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 MID Technology MID Laser Direct Structuring Technology Laser Direct Structuring (LDS) Technology ■ Offers the ability to create parts with finer line width and spacing than conventional MID processes will allow for. ■ The structure is molded in a standard single shot mold using one of several proprietary plastics available. ■ Desired interconnect pattern is directly written on the resulting molded part and the conductive paths are plated using industry standard methods. ■ The plating adheres only where the plastic has been activated by the laser. 3D Part Design Tyco Electronics provides its customers vast design expertise over a wide variety of manufac- turing technologies. Our design engineers are experts in two shot design and product integration for MID products. Optimal solutions are engineered with the appropriate MID technology to best suit the application. Modeling and Simulation Tyco Electroniocs employs the most up to date design tools available. We use sophisticated 3D modeling and simulation packages to accurately manufacture and predict the end product. ■ Pro Engineer Wildfire 2.0 CAD software ■ Auto CAD 2005 ■ MPA Moldflow to predict molding behaviors ■ Pro Mechanica stress and thermal analysis software 64 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Cable Products USB Data Cable Assembly USB Data Cable Assembly Features ■ USB Data cable intend to connect a mobile phone to computer etc. ■ Can be used as charger ■ Connector and cable are approved by USB Org. ■ PU and PVC cable, both types are available. Connector USB A Type USB B Type Mini USB A Type Mini USB B Type Can design the connector to mate customer system USB Cable Assembly Cable 1P+2C+AL+D+B USB 2.0 28 AWG x 28 AWG 28 AWG x 26 AWG 28 AWG x 24 AWG 28 AWG x 22 AWG 28 AWG x 20 AWG Overmolding PVC PVC Free/PU Connectors All specifications subject to change. Consult Tyco Electronics for latest specifications. 65 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Cable Products Music Cable Assembly Music Cable Assembly Features ■ Audio cable intend to connect a mobile phone to the line-in on a stereo amplifier. ■ PU and PVC cable, both types are available. Connector RCA Plug 2.5 mm Audio Plug/Jack 3.5 mm Audio Plug/Jack Adapter from Plug to Jack Can design the connector to mate customer system. Cable Twin Cable Shielded Twisted Pair Cable Music Cable Assembly Overmolding PVC PVC Free/PU Connectors 66 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Cable Products Charger Cable Assembly Charger Cable Assembly Features ■ The semi-goods or finished goods intend to be used for the charger. ■ PU and PVC cable, both types are available. Connector USB Plug 2.0 mm DC Plug 3.5 mm DC Plug Can design the connector to mate customer system. Cable Can follow customer specification. Charger Cable Assembly Overmolding PVC PVC Free/PU Connectors All specifications subject to change. Consult Tyco Electronics for latest specifications. 67 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Cable Products Mobile Phone Headset Solution Mobile Phone Headset Solution Speaker Diameter: 15 mm Impedance: 16 Ω ±15% Frequency Range: 20 Hz up to 20 KHz Sensitive: 108 ±4dB at 1 kHz Nominal Power: 3 mW Maximum Power: 5 mW Connector 3 Pin, gold or nickel plating Cable Length: 400 ±15 mm Pull Force: 30 N/min Flexing Cycle: 3000 times/300 g Non-Migration: PS 60°, 500 g/72 H Cover: PVC Color: Grey/Silver 68 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Cable Products Bluetooth Hands-Free Solution Bluetooth Hands-Free Solution Key Features ■ Continuous Talk Time: 9 hours ■ Standby Time: 400 hours (16 days) ■ Weight: 12 g ■ Voice Dial ■ Redial Last Number1 ■ Call Muting ■ Multi Pairing2 ■ Fast Charge 2 hours ■ Reversible hook with anti allergic soft material for long hold. ■ Bluetooth R v 1.2 Headset and hands-free profile compatible. ■ For phones with hands-free profile function. ■ For headsets which are both in the headset profile. ■ Color: Grey/Black E11 Key Features ■ Continuous Talk Time: 9 hours ■ StandbyTime: 400 hours (16 days) ■ Weight: 14 g ■ Voice Dial ■ Redial Last Number1 ■ Call Muting ■ Multi Pairing2 ■ Fast Charge 2 hours ■ Reversible hook with anti allergic soft material for long hold. ■ Bluetooth v 1.2 headset and hands-free profile compatible. ■ For phones with hands-free profile function. ■ For headsets which are both in the headset profile. All specifications subject to change. Consult Tyco Electronics for latest specifications. 69 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Cable Products High-Speed Micro-Coax Cable Assembly (MCC) High-Speed Micro-Coax Cable Assembly (MCC) Features ■ Thin cable thickness and fine pitch can save room for application. ■ Multi-position can transfer 5 to 25 pairs of signal. ■ High soldering quality makes high performance connect between cable and contact. Tyco Electronics has special know-how for whole assembly process. ■ Tyco Electronics design the connectors by herself. Connector No. of Positions: 10, 17, 20, 30, 40, 44, 50 pos. are available to use. Pitch: 0.4, 0.5, 0.6, 1.0 mm pitch are available. Direction: Straight and 90 degree are available. Cable Gage: 30, 32, 36, 40, 42 AWG cables are available. Pairs: Single and Twin-Coax cables are available. Micro-Coax Cable Assembly Connectors 70 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Batteries Battery Systems Designing and Building Battery Systems for Technology The Leading Edge in Custom Power Tyco Electronics Battery Systems (TEBS) is a worldwide leader in the design and manufacture of custom battery packs and systems for any portable electronic device or stationary back-up Solutions power. A battery system is much more than a collection of cells. It is the source of the power that enables your products to their fullest potential. When you specify TEBS, you’re getting a dedicated team of innovative designers, trained to devise the perfect solution within your power, space, weight and cost parameters. From Concept Through Total Design TEBS’ worldwide engineering design team incorporates electrical, mechanical and chemical expertise to shorten the time required for design and development, ultimately reducing product delivery times. Our cutting edge technology can increase functionality while reducing size, weight and cost. TEBS has the ability to offer a turnkey design and manufacturing solution to match the battery system to the specifications of your products. Our unique program management system gives you a champion inside TEBS, charged with supervising the design process from concept through finished product. When you specify TEBS, you are buying the power to bring innovations to market, on time. Design Innovation With the goal of maximising compatibility with your product, our mechanical and electrical design team will use creativity and technology to provide the optimum solution. Our engineering and technical sales personnel are experienced in solving complex problems, validating the design steps to ensure downstream performance, and developing quality designs that work. TEBS’ innovations deliver everything needed to get to market sooner, with an added competitive edge. From Concept Through Total Design At TEBS, we provide powerful solutions for a wide range of OEM applications, including: ● Cellular Telephones ● Laptop Computers & PDA’s ● Power Back-Up (i.e. Mass Data Storage Units) ● Digital Still & Video Cameras ● Two-Way Radios ● Data Acquisition ● Test Equipment ● Medical Applications ● Handheld P.O.S. & GPS ● Outdoor Telecom UPS All specifications subject to change. Consult Tyco Electronics for latest specifications. 71 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Batteries Battery Systems Core Manufacturing Processes Cost effective and flexible manufacturing methods are at the core of TEBS’ working methodology. Incorporating advanced production techniques and the most reliable and efficient equipment available in both manual and automated processes. TEBS’ production techniques ensure the consistency and high performance of the finished product. Flexible, future proof processes allow large volume manufacturing capacities and a higher degree of repeatability in both quality and quantity of products. Integrating the best in both design and assembly, TEBS gives you a world-class combination in both service and technology. Testing and Qualification With a fully integrated professional battery pack and cell testing facility in Shanghai, China, TEBS provides complete in-house component and battery pack approval, typically covering cell, PCB and full product assemblies. Testing includes pre-compliance and planned compliance testing in safety, abuse, EMC, environmental reliability, performance and life testing through internal, customer and regulatory specifications and standards. In Shanghai, an array of environmental chambers, cell and pack cycling channels and other specialized equipment is housed in over 6,000 square feet of dedicated testing space. These unique independent testing capabilities offer our customers the ability to complete all of their required specification and environmental testing under one roof and enables TEBS to offer the complete turnkey power solution. The lab is approved by UL to conduct UL1642 and UL2054 testing and issue certification to both standards. TEBS also has senior level representation on the UL Standards Technical Panel (UL1642 & UL2054) and IEEE-P1725 Work Group. TEBS has the additional capability to conduct all UN/DoT testing in-house and provide the required certification documents. Global Commitment TEBS’ world-wide engineering design team incorporates electrical, mechanical and chemical expertise to shorten the time required for design and development, ultimately reducing product delivery times. Our cutting edge technology can increase functionality while reducing size, weight and cost. TEBS has the ability to offer a turnkey design and manufacturing solution to match the battery system to the specifications of your products. Our unique program management system gives you a champion inside TEBS, charged with supervising the design process from concept through finished product. When you specify TEBS, you are buying the power to bring innovations to market, on time. 72 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Mechatronic Center Niefern Technology Portfolio Reel-to-Reel Stamping Mechatronic Center Niefern ■ High-speed stamping ■ 4 fold stamping tool, Advanced Tyco Electronics 70 mm width technologies allow us to ■ Material: Copper alloy produce highly competitive semi-finished products for card manufacturers of the st nd rd 1 , 2 and 3 generation. ■ High-Speed Stamping ■ Selective Plating ■ Laminating ■ Reel-to-Reel Over-Molding Reel-to-Reel Plating The products are delivered ■ Plating in 70 mm width on a reel and can be used ■ Selective Metalization: for chip mounting by our ● Overall Ni customers. ● Contacts Side: – Spots on contact area – Gold flash ● Bonding Side: – Strips or Spots ■ Slitting in 35 mm Reel-to-Reel Lamination ■ Clean room class 100,000 ■ High accuracy dielectric stamping ■ Mechanical alignment and prefixing of dielectric ■ Leadframe roll lamination ■ 100% video control Reel-to-Reel Over-Molding ■ Free cutting in line ■ Multiple cavities mold Bonding Capability Guaranty All specifications subject to change. Consult Tyco Electronics for latest specifications. 73 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Mechatronic Center Niefern LAMFRAME LAMFRAME Key Features ■ Low cost tape for memory and microprocessor applications ■ Compatible with industry standard processes ■ Allow wide range of dielectric (type and thickness) ■ Optimisation of dielectric area for cost reduction ■ Minimum Slit Size: 0.15 mm This technology allows Tyco Electronics to offer a wide range of products for memory and microprocessor smart cards with: ■ Plating Finishes ● Gold ● “Grey like” plating ■ Dielectric ● Polyimide ● Glass epoxy ● Polyester ● … ■ Customized thickness ■ Disconnection option Lamination process is carried out in a clean room to avoid any outside contamination. Tyco Electronics is able to perform bonding tests with gold or aluminium wires during design phase but also to ensure the quality during all the life time of the products. Products are today customer specific, Tyco Electronics Open Design available. 74 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Mechatronic Center Niefern Mini SIM Card Packaging Mini SIM Card Packaging Tyco Electronics propose a new Packaging for the rd 3 Generation of SIM Cards The leadframe is over moulded with a plastic package at dimension close to the final Mini SIM card body. This technology allows our customers to work directly on advanced product and use their standard available reel-to-reel equipments. Key Features ■ Microelectronic can be made on semi final packaging, no module out cutting and embedding operation. ■ Lower risk and process time improvement. ■ Personalisation can be realized separately on tapes, and bring together by a final operation. st nd ■ No additional card body is needed, but also possibility to plug in 1 or 2 card body generation. Produced with the Standard Tyco Electronics Technologies ■ High-speed stamping ■ Selective plating ■ Laminating ■ Reel-to-reel over moulding All specifications subject to change. Consult Tyco Electronics for latest specifications. 75 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 M/A-COM Antenna Products GaAs SP6T 2.5 V Power Switch GaAs SP6T 2.5 V Power Switch Features M/A-COM’s MASWSS0091 is a GaAs PHEMT MMIC single pole six throw (SP6T) high power switch die. This switch is ideally suited for applications where 0.82 high power, low control voltage, low insertion loss, high isolation, small size and low cost are required. The MASWSS0091 is designed for dual-, tri-, and quad-band GSM and DCS/PCS handset systems that connect separate 1.01 transmit and receive functions to a common antenna, and can be used in all systems operating up to 2.5 GHz requiring high power Functional Schematic Die Layout at low control voltage. GaAs SP3T 2.6 V CDMA/GPS Switch GaAs SP3T 2.6 V CDMA/GPS Switch Features M/A-COM’s MASWSS0191 is an industry leading GaAs PHEMT MMIC single pole three throw (SP3T) CDMA-GPS switch in a 2 mm 8-lead STDFN package. The MASWSS0191 is uniquely configured to enable switching from a common antenna port to CDMA cellular, CDMA PCS, or GPS ports. The design is asym- metric and has been fully optimized for excellent cross modulation performance in CELL and PCS paths while still main- taining excellent insertion loss and isolation. The MASWSS0191 is fabricated using a 0.5 micron gate length GaAs PHEMT pro- cess. The process features full passivation for performance and 2.0 reliability. 2.0 Functional Schematic 76 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Lithium Cells and Battery Packs Lithium Cells and Battery Packs External shorts, runaway charging conditions, or abusive charging can cause considerable damage to primary and secondary lithium cells. Rechargeable lithium batteries are used in notebook computers and cellular phones as well as other portable electronic applications. Product Series: LR4, LTP, SRP, VLR, VTP All specifications subject to change. Consult Tyco Electronics for latest specifications. 77 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Rechargeable Battery Pack Protection Rechargeable Battery Pack Protection Due to external shorts, run- away charging conditions, or abusive charging, considerable damage can be sustained in both battery cells and pack surroundings. The most common applications are nickel-cadmium (NiCd), nickel- metal-hydride (NiMH), and lithium-ion (Li-ion) battery packs for cellular phones, laptop/notebook computers, and other portable electronic applications. Product Series: LR4, LTP, SRP, VLR, VLP, VTP 78 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Portable Electronics Input Port Protection Portable Electronics Input Port Protection The use of an incorrect or faulty adapter/charger can irre- parably damage unprotected portable electronics equip- ment. Typical applications include cellular phones, PDAs, and digital cameras. Product Series: nanoSMD, microSMD, miniSMD alternative position PolySwitch device Phone supply FET or BJT PolySwitch Strap device 3x NiMH Charge OV Control IC From AC PWM Ident Adapter OC1 OC2 Battery Pack All specifications subject to change. Consult Tyco Electronics for latest specifications. 79 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products HDMI: LCD, Plasma, HDTV, Set-Top Box, DVD Player HDMI: LCD, Plasma, HDTV, Set-Top Box, DVD Player HDMI (High Definition Multi- media Interface) applications such as LCD displays, Plasma displays, High Definition Tele- vision set-top boxes, and DVD players are susceptible to electrostatic discharge. To help protect the high speed TNDS lines against ESD hits PESD devices are used, two per line. Product Series: PESD 80 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Strap Battery Devices – VLR Series Strap Battery Devices – VLR Series Features ■ Current ratings from 1.7 A to 2.3 A ■ Voltage: 12 V ■ Agency Recognition: UL, CSA, TÜV ■ Fast time-to-trip ■ Low resistance Lead Material: 0.125 mm nominal thickness, quarter-hard nickel Tape Material: Polyester Figure B1 Figure B2 Figure B3 Dimensions (mm) A B C D E F Part Number Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 85 °C Typical Activation VLR VLR170F 20.8 23.2 – 0.8 3.5 3.9 4.5 6.5 4.5 06.5 2.4 2.6 B1 VLR170LF 38.8 41.2 – 0.8 3.5 3.9 8.7 10.30 18.70 20.3 2.4 2.6 B1 VLR170UF 20.8 23.2 – 0.7 3.5 3.7 5.3 6.7 5.3 06.7 2.4 2.6 B2 VLR175F 23.0 24.5 – 0.8 2.9 3.3 4.7 7.2 3.8 05.4 2.4 2.6 B1 VLR175LF 29.3 31.7 – 0.8 2.9 3.3 5.2 6.8 10.00 12.5 2.4 2.6 B1 VLR175UF 23.0 24.5 – 0.7 2.9 3.1 5.2 7.5 4.3 05.7 2.4 2.6 B2 VLR230F 20.9 23.1 – 0.8 4.9 5.3 4.1 5.8 4.1 05.8 3.9 4.1 B1 VLR230F-C36 25.3 27.7 – 0.8 3.5 3.9 3.5 5.7 3.5 05.7 2.9 3.1 B3 VLR230SUF 20.9 23.1 – 0.7 4.9 5.1 4.1 6.0 4.1 06.0 3.9 4.1 B2 All specifications subject to change. Consult Tyco Electronics for latest specifications. 81 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Strap Battery Devices – VLP Series Strap Battery Devices – VLP Series Features ■ Current ratings from 2.1 A to 2.7 A ■ Voltage: 16 V ■ Agency Recognition: UL, CSA, TÜV ■ Fast time-to-trip ■ Low resistance Lead Material: 0.125 mm nominal thickness, quarter-hard nickel Tape Material: Polyester Figure B4 Dimensions (mm) A B C D E F Part Number Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 90 °C Typical Activation VLP VLP220F 21.1 23.3 0.6 0.8 3.5 3.9 5.1 6.8 5.1 6.8 2.9 3.1 B4 VLP270F 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 5.8 3.9 4.1 B4 82 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Strap Battery Devices – VTP Series Strap Battery Devices – VTP Series Features ■ Current ratings from 1.1 A to 2.4 A ■ Voltage: 16 V ■ Agency Recognition: UL, CSA, TÜV ■ Fast time-to-trip ■ Low resistance Lead Material: 0.125 mm nominal thickness, quarter-hard nickel Tape Material: Figure B5 Figure B6 Figure B7 Polyester Figure B8 Figure B9 Dimensions (mm) A B C D E F Part Number Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 90 °C Typical Activation VTP VTP110F 23.6 25.6 – 0.7 2.7 2.9 7.0 8.0 7.0 08.0 2.3 2.5 B9 VTP170F 15.4 17.5 0.5 0.8 7.0 7.4 4.0 6.2 4.0 06.2 3.9 4.1 B5 VTP170XF 20.9 22.9 0.5 0.8 4.9 5.3 6.0 8.6 6.0 08.6 3.9 4.1 B6 VTP170XSF 20.9 22.9 0.5 0.8 4.9 5.3 6.0 8.6 6.0 08.6 3.9 4.1 B7 VTP175F 21.2 23.2 – 0.8 3.5 3.9 4.6 6.6 4.6 06.6 2.9 3.1 B6 VTP175LF 25.8 28.2 – 0.8 3.5 3.9 5.7 7.3 8.7 10.3 2.4 2.6 B6 VTP175UF 21.2 23.2 – 0.7 3.5 3.7 5.6 6.8 5.6 06.8 2.9 3.1 B9 VTP200GF 20.9 23.1 – 0.8 4.1 4.5 3.0 4.8 3.0 04.8 2.9 3.1 B6 VTP200UF 20.9 23.1 – 0.7 4.1 4.3 4.0 5.4 4.0 05.4 2.9 3.1 B9 VTP210GF 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 05.8 3.9 4.1 B6 VTP210SF 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 05.8 3.9 4.1 B7 VTP210SLF 29.0 32.0 0.6 0.8 4.9 5.3 3.5 5.8 12.50 14.5 3.9 4.1 B7 VTP210SSF 20.9 23.1 0.6 0.8 4.9 5.3 4.1 5.8 4.1 05.8 3.9 4.1 B8 VTP240F 23.8 26.2 – 0.8 4.9 5.3 3.5 5.7 3.5 05.7 3.9 4.1 B6 All specifications subject to change. Consult Tyco Electronics for latest specifications. 83 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Strap Battery Devices – LTP Series Strap Battery Devices – LTP Series Features ■ Current ratings from 0.7 A to 3.4 A ■ Voltage: 15 V to 25 V ■ Agency Recognition: UL, CSA, TÜV ■ Fast time-to-trip ■ Low resistance Lead Material: 0.125 mm nominal thickness, quarter-hard nickel Tape Material: Polyester Figure B10 Figure B11 Figure B12 Dimensions (mm) A B C D E F Part Number Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 110 °C Typical Activation LTP LTP070F 19.9 22.1 0.7 1.2 4.9 5.2 5.5 7.5 5.5 7.5 3.9 4.1 B10 LTP070SF 19.9 22.1 0.7 1.2 4.9 5.2 5.5 7.5 5.5 7.5 3.9 4.1 B11 LTP100F 20.9 23.1 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B10 LTP100SF 20.9 23.1 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B11 LTP100SLF 29.0 32.0 0.6 1.0 4.9 5.2 3.5 5.5 12.50 14.50 3.9 4.1 B11 LTP100SSF 20.9 23.1 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B12 LTP180F 24.0 26.0 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B10 LTP180LF 35.5 37.5 0.6 1.0 4.9 5.2 9.7 11.00 9.7 11.00 3.9 4.1 B10 LTP180SF 24.0 26.0 0.6 1.0 4.9 5.2 4.1 5.5 4.1 5.5 3.9 4.1 B11 LTP190F 21.3 23.4 0.5 1.1 10.20 11.00 5.0 7.6 5.0 7.6 4.8 5.4 B10 LTP260F 24.0 26.0 0.6 1.0 10.80 11.90 5.0 7.0 5.0 7.0 5.9 6.1 B10 LTP300F 28.4 31.8 0.5 1.1 13.00 13.50 6.3 8.9 6.3 8.9 6.0 6.6 B10 LTP340F 24.0 26.0 0.6 1.0 14.80 15.90 4.0 5.0 4.0 5.0 5.9 6.1 B10 84 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Strap Battery Devices – LR4 Series Strap Battery Devices – LR4 Series Features ■ Current ratings from 1.7 A to 14.1 A ■ Voltage: 15 V to 20 V ■ Agency Recognition: UL, CSA, TÜV ■ Fast time-to-trip ■ Low resistance Lead Material: 0.125 mm nominal thickness, quarter-hard nickel Tape Material: Polyester Figure B13 Figure B14 Figure B15 Figure B16 Dimensions (mm) Part Number A B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 125 °C Typical Activation LR4 LR4-170UF 19.0 21.0 0.5 0.7 3.8 4.0 5.3 6.5 5.3 6.5 2.9 3.1 B15 LR4-190F 19.9 22.1 0.6 1.0 4.9 5.5 5.5 7.5 5.5 7.5 3.9 4.1 B13 LR4-190SF 19.9 22.1 0.6 1.0 4.9 5.5 5.5 7.5 5.5 7.5 3.9 4.1 B14 LR4-260F 20.9 23.1 0.6 1.0 4.9 5.5 4.1 5.5 4.1 5.5 3.9 4.1 B13 LR4-260SF 20.9 23.1 0.6 1.0 4.9 5.5 4.1 5.5 4.1 5.5 3.9 4.1 B14 LR4-380F 24.0 26.0 0.6 1.0 6.9 7.5 4.1 5.5 4.1 5.5 4.9 5.1 B13 LR4-380XF 32.2 35.8 0.6 1.0 4.9 5.5 5.5 7.5 5.5 7.5 3.9 4.1 B13 LR4-450F 24.0 26.0 0.6 1.0 9.9 10.50 5.3 6.7 5.3 6.7 5.9 6.1 B13 LR4-550F 35.0 37.0 0.6 1.0 6.9 7.5 5.3 6.7 5.3 6.7 4.9 5.1 B13 LR4-600F 24.0 26.0 0.6 1.0 13.90 14.50 4.1 5.5 4.1 5.5 5.9 6.1 B13 LR4-600XF 40.5 42.7 0.6 1.0 6.9 7.5 5.2 6.8 5.2 6.8 4.9 5.1 B13 LR4-730F 27.1 29.1 0.6 1.0 13.90 14.50 4.1 5.5 4.1 5.5 5.9 6.1 B13 LR4-880SSF 62.8 65.2 0.6 1.0 7.9 8.5 10.00 12.00 10.00 12.00 5.9 6.1 B16 LR4-900F 45.4 47.6 0.9 1.3 7.9 8.5 4.6 6.2 4.6 6.2 5.9 6.1 B13 LR4-1300SSF 61.5 66.5 0.9 1.3 9.4 10.00 5.0 7.5 5.0 7.5 5.9 6.1 B16 All specifications subject to change. Consult Tyco Electronics for latest specifications. 85 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Strap Battery Devices – SRP Series Strap Battery Devices – SRP Series Features ■ Current ratings from 1.2 A to 4.2 A ■ Voltage: 15 V to 30 V ■ Agency Recognition: UL, CSA, TÜV ■ Fast time-to-trip ■ Low resistance Lead Material: 0.125 mm nominal thickness, quarter-hard nickel Tape Material: Polyester Figure B17 Figure B18 Figure B19 Dimensions (mm) Part Number A B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. SRP SRP120F 19.9 22.1 0.6 1.0 04.9 05.2 5.5 7.5 5.5 7.5 3.9 4.1 B17 SRP120LF 24.9 27.1 0.6 1.0 04.9 05.2 5.5 7.5 10.5 12.5 3.9 4.1 B17 SRP120SF 19.9 22.1 0.6 1.0 04.9 05.2 5.5 7.5 5.5 7.5 3.9 4.1 B18 SRP175F 20.9 23.1 0.6 1.0 04.9 05.2 4.1 5.5 4.1 5.5 3.9 4.1 B17 SRP175LF 29.9 32.1 0.6 1.0 04.9 05.2 5.5 7.5 10.50 12.50 3.9 4.1 B17 SRP175SF 20.9 23.1 0.6 1.0 04.9 05.2 4.1 5.5 4.1 5.5 3.9 4.1 B18 SRP175SSF 20.9 23.1 0.6 1.0 04.9 05.2 4.1 5.5 4.1 5.5 3.9 4.1 B19 SRP200F 21.3 23.4 0.5 1.1 10.2 11.0 5.0 7.6 5.0 7.6 4.8 5.4 B17 SRP350F 28.4 31.8 0.5 1.1 13.0 13.5 6.3 8.9 6.3 8.9 6.0 6.6 B17 SRP420F 30.6 32.4 0.5 1.1 12.9 13.6 5.0 7.5 5.0 7.5 6.0 6.7 B17 86 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Surface-Mount Devices – nanoSMDC Surface-Mount Devices – nanoSMDC Features ■ Broadest range of resett- able devices available in the industry ■ Current ratings from 0.12 A to 2 A ■ Voltage ratings from 6 V to 48 V ■ Agency Recognition: UL, CSA, TÜV ■ Fast time-to-trip ■ Low resistance Terminal Pad Material: 100 % matte tin with nickel underplate Figure S1 Dimensions (mm) Part Number A B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. nanoSMP Series Size 3216 mm/1206 mils nanoSMDC012F 3.00 3.40 0.62 1.00 1.37 1.80 0.25 0.75 0.08 – – – S1 nanoSMDC016F 3.00 3.40 0.62 1.00 1.37 1.80 0.25 0.75 0.08 – – – S1 nanoSMDC020F 3.00 3.40 0.38 0.64 1.37 1.80 0.25 0.75 0.08 – – – S1 nanoSMDC035F 3.00 3.40 0.38 0.64 1.37 1.80 0.25 0.75 0.08 – – – S1 nanoSMDC050F/13.2 3.00 3.40 0.38 0.64 1.37 1.80 0.25 0.75 0.08 – – – S1 nanoSMDC075F 3.00 3.40 0.28 0.48 1.37 1.80 0.25 0.75 0.08 – – – S1 nanoSMDC110F 3.00 3.40 0.67 1.00 1.37 1.80 0.25 0.75 0.08 – – – S1 nanoSMDC150F 3.00 3.40 0.55 0.89 1.37 1.80 0.25 0.75 0.08 – – – S1 nanoSMDC200F 3.00 3.40 0.68 1.25 1.37 1.80 0.25 0.75 0.08 – – – S1 All specifications subject to change. Consult Tyco Electronics for latest specifications. 87 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Surface-Mount Devices – microSMD Surface-Mount Devices – microSMD Features ■ Broadest range of resett- able devices available in the industry ■ Current ratings from 0.05 A to 1.75 A ■ Voltage ratings from 6 V to 30 V ■ Agency Recognition: UL, CSA, TÜV ■ Small footprint ■ Fast time-to-trip ■ Low resistance Terminal Pad Material: 100 % matte tin with nickel underplate Figure S2 Figure S3 Dimensions (mm) Part Number A B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. microSMD Series Size 3225 mm/1210 mils microSMD005F 3.00 3.43 0.50 0.85 2.35 2.80 0.25 0.75 0.20 – – – S3 microSMD010F 3.00 3.43 0.50 0.85 2.35 2.80 0.25 0.75 0.20 – – – S2 microSMD035F 3.00 3.43 0.38 0.62 2.35 2.80 0.25 0.75 0.20 – – – S2 microSMD050F 3.00 3.43 0.38 0.62 2.35 2.80 0.25 0.75 0.20 – – – S2 microSMD075F 3.00 3.43 0.38 0.62 2.35 2.80 0.25 0.75 0.20 – – – S2 microSMD110F 3.00 3.43 0.28 0.48 2.35 2.80 0.25 0.75 0.20 – – – S2 microSMD150F 3.00 3.43 0.51 1.22 2.35 2.80 0.25 0.75 0.20 – – – S2 microSMD175F 3.00 3.43 0.40 0.76 2.35 2.80 0.25 0.75 0.20 – – – S2 88 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Surface-Mount Devices – miniSMDC Surface-Mount Devices – miniSMDC Features ■ Broadest range of resett- able devices available in the industry ■ Current ratings from 0.14 A to 2.6 A ■ Voltage ratings from 6 V to 60 V ■ Agency Recognition: UL, CSA, TÜV ■ Small footprint ■ Fast time-to-trip ■ Low resistance Terminal Pad Material: 100 % matte tin with nickel underplate Figure S4 Dimensions (mm) Part Number A B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. miniSMDC Series Size 4532 mm/1812 mils miniSMDC014F 4.37 4.73 0.635 0.89 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC020F 4.37 4.73 0.635 0.89 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC050F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC075F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC075F/24 4.37 4.83 0.81 1.30 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC110F 4.37 4.73 0.38 0.62 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC110F/16 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC110F/24 4.37 4.83 0.81 1.30 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC125F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC125F/16 4.37 4.83 0.28 0.48 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC150F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC150F/12 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC150F/24 4.37 4.83 1.00 1.68 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC160F 4.37 4.73 0.28 0.48 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC200F 4.37 4.73 0.51 1.22 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC260F 4.37 4.73 0.48 0.74 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC260F/12 4.37 4.73 0.76 1.25 3.07 3.41 0.25 0.95 0.20 – – – S4 miniSMDC260F/16 4.37 4.73 0.76 1.25 3.07 3.41 0.25 0.95 0.20 – – – S4 All specifications subject to change. Consult Tyco Electronics for latest specifications. 89 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Surface-Mount Devices – miniSMDE Surface-Mount Devices – miniSMDE Features ■ Broadest range of resett- able devices available in the industry ■ Current Rating: 1.9 A ■ Voltage Rating: 16 V ■ Agency Recognition: UL, CSA, TÜV ■ Small footprint ■ Fast time-to-trip ■ Low resistance Terminal Pad Material: 100 % matte tin with nickel underplate Figure S5 Dimensions (mm) Part Number A B C D E F Figure Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. miniSMDE Series Size 11550 mm/4420 mils miniSMDE190F 11.15 11.51 0.33 0.53 4.83 5.33 0.51 1.02 0.38 – – – S5 90 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Fast Acting Fuses Fast Acting Fuses Features Fast-acting fuses help provide overcurrent protection on systems using DC power sources up to 63 V DC. The fuse’s monolithic, multilayer design provides the highest hold current in the smallest footprint, reduces diffusion-related aging, improves product relia- bility and resilience, and enhances high temperature performance in a wide range of circuit protection designs. This helps facilitate the development of more reliable, high-performance consumer electronics such as laptops, multimedia devices, cell phones, and other portable electronics. Material Specifications Construction Body Material: Ceramic Termination Material: Silver, Nickel, Tin Fuse Element: Silver Terminal Strength: Hanging Test Typical Electrical Maximum ✱ ✱ ✱ ✱ 0603: 0.5 kg, 30 seconds; Part Characteristics Interrupt Ratings Number 1206: 1.5 kg, 30 seconds; Rated Nominal Voltage Current 0402: Part types meet 2-pound push test † † Current Cold DCR (V ) (A) DC (A) (Ω) 0402SFF050F/24 0.50 0.380 Dimensions and Pad Layout 0402SFF075F/24 0.75 0.210 0402SFF100F/24 1.00 0.120 0402 (1005 mm) Fast Acting Surface-Mount Chip Fuses 0402SFF150F/24 1.50 0.056 24 35 Shape and Dimensions Recommended Pad Layout Inch (mm) Inch (mm) 0402SFF200F/24 2.00 0.035 0402SFF300F/24 3.00 0.021 0402SFF400F/24 4.00 0.014 0603SFF050F/32 0.50 0.485 0603SFF075F/32 0.75 0.254 50 0603SFF100F/32 1.00 0.131 0603SFF150F/32 1.50 0.059 0603SFF200F/32 2.00 0.044 0603 (1608 mm) Fast Acting Surface-Mount Chip Fuses 32 0603SFF250F/32 2.50 0.032 Shape and Dimensions Recommended Pad Layout 0603SFF300F/32 3.00 0.025 Inch (mm) Inch (mm) 35 0603SFF350F/32 3.50 0.024 0603SFF400F/32 4.00 0.018 0603SFF500F/32 5.00 0.013 0603SFF600F/24 6.00 0.010 24 1206SFF050F/63 0.50 0.500 1206SFF075F/63 0.75 0.330 1206SFF100F/63 1.00 0.220 63 1206SFF150F/63 1.50 0.120 50 1206 (3216 mm) Fast Acting Surface-Mount Chip Fuses 1206SFF175F/63 1.75 0.100 Shape and Dimensions Recommended Pad Layout 1206SFF200F/63 2.00 0.050 Inch (mm) Inch (mm) 1206SFF250F/32 2.50 0.035 1206SFF300F/32 3.00 0.031 32 1206SFF400F/32 4.00 0.022 1206SFF500F/32 5.00 0.015 1206SFF600F/24 6.00 0.013 45 1206SFF700F/24 7.00 0.011 24 1206SFF800F/24 8.00 0.008 ✱ ) Measured at 25 °C † ) Measured at 10% of rated current All specifications subject to change. Consult Tyco Electronics for latest specifications. 91 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products Slow Blow Fuses Slow Blow Fuses Features Industry standard 1206 chip sizes, high reliability and strong arc suppression characteristics. The fuse’s monolithic, multi- layer design helps provide some of the highest current ratings available in the 1206 footprint and enhances high temperature performance in a wide range of circuit protection designs. Designed for DC power applications of up to 63 V DC such as protection of power supplies, capacitor filter banks, LCD backlight inverters, electric motors and portable electronics. Material Specifications Construction Body Material: Ceramic Termination Material: Silver, Nickel, Tin Fuse Element: Silver Terminal Strength: Hanging Test: 1.5 kg, 30 seconds Dimensions and Pad Layout Typical Electrical ✱ ✱ Part Characteristics 1206 (3216mm) Slow Blow Surface-Mount Chip Fuses Number Rated Nominal Nominal Voltage † † 2 Current Cold DCR l t (V ) 2 2 DC (A) (Ω) (A sec) Shape and Dimensions 1206SFS100F/63 1.0 0.260 0.11 Inch (mm) 1206SFS125F/63 01.25 0.150 0.22 63 1206SFS150F/63 1.5 0.130 0.23 1206SFS200F/63 2.0 0.090 0.63 1206SFS250F/32 2.5 0.050 0.90 1206SFS300F/32 3.0 0.032 1.20 1206SFS350F/32 3.5 0.028 1.60 32 1206SFS400F/32 4.0 0.022 2.20 1206SFS450F/32 4.5 0.019 3.60 1206SFS500F/32 5.0 0.018 5.30 1206SFS550F/24 5.5 0.014 6.40 1206SFS600F/24 6.0 0.012 8.50 Recommended 24 Pad Layout 1206SFS700F/24 7.0 0.009 10.000 Inch (mm) 1206SFS800F/24 8.0 0.008 16.900 ✱ ) Measured at 10% of rated current and 25 °C 2 † ) Melting l t at 0.001 sec clear time 92 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Raychem Circuit Protection Products ESD Protection Devices ESD Protection Devices Features Designed for I/O port protection in high-speed data transmission applications, PESD protection devices shunt ESD away from sensitive circuitry in electronic devices. The Raychem PESD protection devices provide exceptionally low capacitance, and they perform better than other comparable components in transmission line pulse (TLP) testing, as well as IEC61000-4-2 testing, especially after multiple hits (up to 1000). The devices offer a lower trigger voltage and a lower clamping voltage than typical polymer ESD devices, resulting in improved protection of sensitive electronic components. Dimensions ✱ Dimensions (mm) Part Length A Height B Terminal Width C Width D Number Min. Max. Min. Max. Min. Max. Min. Max. 0402 0.95 1.05 0.33 0.43 0.10 0.30 0.45 0.55 0603 1.40 1.80 0.38 0.58 0.10 0.50 0.60 1.00 ✱ ) Rounded off approximation ✱ Dimensions (mm) Part Length A Height B Terminal Width C Width D Width E Width F Number Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. Min. Max. 1206Q 3.0 3.4 0.4 0.6 0.1 0.3 1.4 1.8 0.2 0.6 0.2 0.6 ✱ ) Rounded off approximation Pad Layout ✱ Dimensions (mm) Part Number VRef. WRef. XRef. YRef. Figure PESD0402Q – 0.65 ±0.05 0.35 ±0.05 0.85 ±0.05 – E3 PESD0603Q – 0.95 ±0.05 0.55 ±0.05 1.05 ±0.05 – E3 PESD1206Q 3.2 ±0.2 22.0 ±0.20 0.50 ±0.10 0.80 ±0.20 1.0 ±0.1 E4 Note: Solder Thickness 0.15 to 0.20 mm ✱ ) Rounded off approximation Figure E3 Figure E4 All specifications subject to change. Consult Tyco Electronics for latest specifications. 93 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Engineering Notes 94 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Switches FSM 6 x 6 Series FSM 6 x 6 Series ■ Different Actuator and Mounting Versions Technical Features Style: 6 x 6 mm Mounting Style: THT, SMT Right-Angle Versions: Available Low Profile Versions: Available Flush Actuator Version: Actuator Force Height Product Key Mounting Packaging Part Number (N) (mm) Available FSM2JSMATR 1.6 4.3 3-1437565-0 Different Actuator Styles: FSM4JSMATR 1.6 5.0 4-1437565-2 Available FSM6JSMATR 1.6 7.0 5-1437565-0 ESD Ground Terminal/ Locating Post: FSM2JSMAATR 2.6 4.3 2-1437565-9 Tape and Reel Optional/No FSM4JSMXLTR 0.7 5.0 0-1571563-2 Sealed Versions: FSM4JSMAATR 2.6 5.0 0-1571563-4 Available FSM6JSMAATR 2.6 7.0 1-1571563-2 Standard Actuation Force: FSM2JSMLTR 1.0 4.3 0-1571527-2 SMT 1.6 and 2.6 N FSM2JSMA 1.6 4.3 2-1437565-7 Electrical Endurance: FSM4JSMA 1.6 5.0 4-1437565-1 up to 2,000,000 cycles FSM6JSMA 1.6 7.0 4-1437565-9 FSM2JSMAA 2.6 4.3 2-1437565-8 Operating Temperature Range: Bulk –20 °C up to +85 °C FSM4JSMXL 0.7 5.0 0-1571563-1 FSM4JSMAA 2.6 5.0 0-1571563-3 Dimensions (L x W x H) Horizontal Version: FSM6JSMAA 2.6 7.0 1-1571563-1 6.0 x 6.0 x 4.3 … 17.0 mm FSM2JSML 1.0 4.3 0-1571527-1 Sealed Version: FSM, Extended Life, J-Lead 7.6 x 7.6 x 3.3 … 5.0 mm Bulk 0-1571625-5 FSM, J 1.6 2.5 SMT/J Packaging: Tape and Reel 0-1571625-6 Tape and Reel, Bulk FSM, Extended Life, Gull Wing Bulk 0-1571626-5 FSM, G 1.6 2.5 SMT/G Tape and Reel 0-1571626-6 FSM, Extended Life, Gull Wing, Ground Terminal Bulk 0-1571636-5 FSM, G, Grd.T. 1.6 2.5 SMT/G Tape and Reel 0-1571636-6 FSM1LP, Low Profile FSM1LP 1.6 1-1437565-6 3.1 SMT Bulk FSM1LPA 2.6 1-1437565-7 FSM1LPTR 1.6 1-1437565-9 3.1 SMT Tape and Reel FSM1LPATR 2.6 1-1437565-8 FSM Sealed Extended Actuator Bulk 0-1571294-1 4.3 SMT Tape and Reel 0-1571294-2 FSM Sealed 1.6 Bulk 0-1571294-3 5.0 SMT Tape and Reel 0-1571294-4 FSM Sealed Flush Actuator Bulk 0-1571296-1 FSM Sealed, Fl. 1.6 3.3 SMT Tape and Reel 0-1571296-2 FSM Sealed Right-Angle Bulk 0-1571407-1 FSM Sealed RA 2.6 – SMT Tape and Reel 0-1571407-2 All specifications subject to change. Consult Tyco Electronics for latest specifications. 95 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Switches FSMCT Series FSMCT Series ■ Low Profile Technical Features Style: 5 x 5 mm Mounting Style: SMT Right-Angle Versions: No Low Profile Versions: No Flush Actuator Version: No Actuator Force Height Product Key Mounting Packaging Part Number (N) (mm) Different Actuator Styles: FSMCTTR 1.6 8-1437565-0 No 1.5 SMT Tape and Reel FSMCTATR 2.6 8-1437565-1 ESD Ground Terminal/ Locating Post: No/No Sealed Versions: No Standard Actuation Force: 1.6 and 2.6 N Electrical Endurance: up to 1,000,000 cycles Operating Temperature Range: –20 °C up to +85 °C Dimensions (L x W x H) Horizontal Version: 5.2 x 5.2 x 1.5 mm Packaging: Tape and Reel 96 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Switches FSM 3.5 x 6 Series FSM 3.5 x 6 Series ■ Small PCB Footprint Technical Features Style: 3.5 x 6 mm Mounting Style: THT, SMT Right-Angle Versions: No Low Profile Versions: No Flush Actuator Version: Available Actuator Force Height Product Key Mounting Packaging Part Number (N) (mm) Different Actuator Styles: FSMSM Bulk 1437566-3 Available 4.3 SMT FSMSMTR 1437566-4 ESD Ground Terminal/ Locating Post: FSMJM3,5ATR 1.8 1.8 3.5 0147873-3 Tape and Reel No/No FSMJM4,3ATR 4.3 SMT/J 0147873-2 Sealed Versions: FSMJM5ATR 5.0 0147873-1 Available Standard Actuation Force: FSM Sealed 1.3 and 1.8 N FSM Sealed 5.0 SMT 1571298-2 Electrical Endurance: FSM Sealed 1.3 4.3 SMT/J Tape and Reel 1571299-2 up to 40,000 cycles FSM Sealed 5.0 SMT/J 1571299-4 Operating Temperature Range: –40 °C up to +85 °C Dimensions (L x W x H) Horizontal Version: 3.5 x 6.0 x 4.3 … 5.0 mm Sealed Version: 4.7 x 6.8 x 4.3 … 5.0 mm Packaging: Tape and Reel, Bulk All specifications subject to change. Consult Tyco Electronics for latest specifications. 97 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Switches FSM 0.5 mm FSM 0.5 mm ■ Ultra Low Profile Technical Features Style: 5 x 5 mm Mounting Style: SMT Right-Angle Versions: No Low Profile Versions: Standard Flush Actuator Version: Standard Actuator Force Height Product Key Mounting Packaging Part Number (N) (mm) Different Actuator Styles: FSM 4.8x4.8x0.5 1.6 0.5 SMT Tape and Reel 1825534-1 No ESD Ground Terminal/ Locating Post: No/No Sealed Versions: No Standard Actuation Force: 1.6 N Electrical Endurance: up to 500,000 cycles Operating Temperature Range: –20 °C up to +70 °C Dimensions (L x W x H) Horizontal Version: 4.8 x 4.8 x 0.5 mm Packaging: Tape and Reel 98 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Switches Turtle Style Turtle Style ■ Side Actuated Tactile Technical Features Style: Turtle Mounting Style: SMT Right-Angle Versions: No Low Profile Versions: No Flush Actuator Version: No Actuator Force Height Product Key Mounting Packaging Part Number (N) (mm) Different Actuator Styles: FSM Turtle Bulk 1571262-1 No 1.6 1.8 SMT FSM Turtle Tape and Reel 1571262-2 ESD Ground Terminal/ Locating Post: No/Optional Sealed Versions: No Standard Actuation Force: 1.6 N Electrical Endurance: up to 100,000 cycles Operating Temperature Range: –20 °C up to +85 °C Dimensions (L x W x H) Horizontal Version: 4.5 x 7.5 x 1.8 mm Packaging: Tape and Reel, Bulk All specifications subject to change. Consult Tyco Electronics for latest specifications. 99 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Switches CoinKey™ CoinKey™ ■ Improve the Human Interface Technical Features CoinKey is a one finger operated key with excellent input and navigational capabilities. With its two-ways rotation and 5 press points; left, right, top, bottom and center, CoinKey is the ultimate key for multi-application handheld devices. Its unique functionality makes it possible to develop more efficient and user-friendly menu systems than with any other navigation key in the market. We would be happy to offer opportunity assessment in that regard. Documentation Drawing: 1705448-1 Product Specification: 108-19288 CoinKey is a registered trademark of 100 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Engineering Notes All specifications subject to change. Consult Tyco Electronics for latest specifications. 101 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Labels MP Metalized Polyester Labels MP Metalized Polyester Labels Tyco Electronics MP is a thermal transfer printable metalized polyester film with a permanent acrylic adhesive, designed for rating plates and other applications that require a metal look, such as nameplates, equipment labels, detailed product information labels and serial number plates. MP is UL Listed and CSA Certified. Print performance and durability are reliable when used with Tyco Electronics’s RHD series ribbon. Features and Benefits ■ Thermal transfer printable ■ Metalized appearance ■ Ideal for rating plate applications ■ Several die-cut sizes available ■ UL Listed and CSA Certified Specifications: TTDS-074 Part Numbering System Adhesive: Permanent Acrylic MP-080080-10-8A Service Temperature: –40 °C to +150 °C ✱ Recommended Printer: T308S ✱ Recommended Ribbon: 1330-0607-10 Color ✱ ) Alternative printers and ribbons are Pack Size available for special applications. Label Height (mm) Contact Tyco Electronics for more information. Label Width (mm) Product Family Ordering Information 102 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Labels MP Metalized Polyester Labels (continued) Dimensions (mm) Product Package Labels Label Width Label Height Horizontal Repeat Vertical Repeat Web Width Order Code Quantity Across A B C D E MP-040040-25-8A 25,000 20 04.0 04.0 04.0 07.2 86.0 MP-064064-25-8A 25,000 12 06.4 06.4 06.4 09.5 82.2 ✱ MP-080080-10-8A 10,000 08 08.0 08.0 09.9 13.3 83.3 MP-089047-10-8A 10,000 05 08.9 04.7 11.4 07.9 60.6 MP-095080-25-8A 25,000 05 09.5 08.0 12.2 12.7 64.3 MP-095095-10-8A 10,000 07 09.5 09.5 11.1 12.7 82.1 MP-127111-10-8A 10,000 05 12.7 11.1 16.8 14.3 86.0 MP-127127-10-8A 10,000 05 12.7 12.7 15.9 15.9 82.6 ✱ MP-165051-25-8A 25,000 04 16.5 05.1 17.8 08.3 75.8 MP-165102-10-8A 10,000 05 16.5 10.2 19.1 13.8 99.1 MP-171171-10-8A 10,000 05 17.1 17.1 19.7 20.3 101.80 ✱ MP-178095-10-8A 10,000 04 17.8 09.5 19.1 12.7 80.9 ✱ MP-191064-10-8A 10,000 04 19.1 06.4 21.6 09.5 89.9 MP-191114-15-8A 15,000 03 19.1 11.4 22.2 14.7 69.5 ✱ MP-203127-10-8A 10,000 04 20.3 12.7 22.9 15.9 94.6 MP-229064-10-8A 10,000 03 22.9 06.4 28.6 09.5 86.0 MP-254045-10-8A 10,000 03 25.4 04.6 31.8 08.5 95.3 MP-254064-10-8A 10,000 03 25.4 06.4 27.9 09.5 87.3 MP-254097-10-8A 10,000 03 25.4 09.7 27.9 12.7 87.4 MP-254127-10-8A 10,000 03 25.4 12.7 27.9 16.9 87.4 MP-254254-10-8A 10,000 03 25.4 25.4 27.9 28.6 87.4 ✱ MP-305047-10-8A 10,000 02 30.5 04.7 33.0 07.8 69.5 MP-318064-10-8A 10,000 01 31.8 06.4 N/A 09.5 37.9 MP-318097-10-8A 10,000 01 31.8 09.7 N/A 12.7 37.8 MP-381064-10-8A 10,000 01 38.1 06.4 N/A 09.5 44.5 ✱ MP-381127-5-8A 05,000 02 38.1 12.7 44.2 15.9 88.2 MP-381191-5-8A 05,000 02 38.1 19.1 43.2 22.2 87.6 ✱ MP-381381-2.5-8A 02,500 02 38.1 38.1 44.5 40.8 88.9 ✱ MP-381635-5-8A 05,000 02 38.1 63.5 40.6 66.7 84.7 ✱ MP-406254-1.5-8A 01,500 02 40.6 25.4 55.9 38.1 102.90 MP-445064-10-8A 10,000 01 44.5 06.4 N/A 09.5 50.4 MP-445102-5-8A 05,000 01 44.5 10.2 N/A 12.7 50.4 MP-445445-2-8A 02,000 01 44.5 44.5 N/A 47.6 50.4 MP-478175-5-8A 05,000 01 47.8 17.5 N/A 24.4 66.0 MP-508064-10-8A 10,000 01 50.8 06.4 N/A 09.5 56.9 MP-508095-5-8A 05,000 01 50.8 09.5 N/A 12.7 57.2 MP-508127-5-8A 05,000 01 50.8 12.7 N/A 15.9 56.9 MP-508254-5-8A 05,000 01 50.8 25.4 N/A 28.6 57.2 MP-508318-2.5-8A 02,500 01 50.8 31.8 N/A 34.9 56.9 MP-508508-3-8A 03,000 01 50.8 50.8 N/A 54.6 54.0 MP-523841-1.5-8A 01,500 01 52.3 84.1 N/A 88.9 58.2 MP-610419-2.5-8A 02,500 01 61.0 41.9 N/A 45.5 67.3 MP-699191-5-8A 05,000 01 69.9 19.1 N/A 23.3 76.2 MP-699254-5-8A 05,000 01 69.9 25.4 N/A 28.6 76.2 MP-762381-2.5-8A 02,500 01 76.2 38.1 N/A 41.3 82.3 MP-762508-2.5-8A 02,500 01 76.2 50.8 N/A 54.0 82.6 MP-762127-1-8A 01,000 01 76.2 127.00 N/A 129.50 79.4 MP-101508-2.5-8A 02,500 01 101.60 50.8 N/A 54.6 104.10 MP-101635-2.5-8A 02,500 01 101.60 63.5 N/A 66.7 107.70 MP-101762-1.8-8A 01,800 01 101.60 76.2 N/A 79.4 104.10 MP-101101-1.3-8A 01,300 01 101.60 101.60 N/A 104.80 104.10 MP-101165-0.85-8A 00,850 01 101.60 165.10 N/A 168.30 104.90 ✱ ) Note: Standard Format Not Compatible with T200 Printers. All specifications subject to change. Consult Tyco Electronics for latest specifications. 103 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Labels ® Kapton Labels ® Kapton Labels ® Tyco Electronics polyimide (Kapton ) labels are all ideal for high temperature labeling requirements such as printed circuit boards. They are suitable for direct wave (bottom side) and IR reflow ® (top side) PCB applications. Tyco Electronics Kapton labels are designed to withstand the fluxes, cleaning solvents and molten solder encountered in the manufacture of printed circuit boards. They offer excellent contrast for bar code applications. ® Tyco Electronics Kapton labels are suitable for the harshest high temperature applications. For reliable print performance and durability, use with Tyco Electronics’s RHT-45 series ribbon. Features and Benefits ■ UL Listed: T1K, T2K & TSK ■ Thermal transfer printable ■ High temperature permanent acrylic adhesive T1K ■ Gloss white topcoat ■ Withstands surface mount board processes on either the top or bottom side of the board. Specifications: T1K TTDS-034 ■ Low profile 1 mil film offers polyimide thermal performance T2K TTDS-035 at competitive cost. TSK TTDS-085 ■ Ideal for manual apply applications. Adhesive: Permanent Acrylic Service Temperature: T2K 1 2 2 2 T1K , T2K , TSK , KTT –40 °C to +260 °C ■ Gloss white topcoat 3 T2Y –40 °C to +232 °C ■ Withstands surface mount board processes on either the top 1 Flash exposure to +472 °C or bottom side of the board. 2 Flash exposure to +538 °C ■ Ideal for auto apply applications. 3 Flash exposure to +316 °C Recommended Printer: KTT ✱ T1K, T2K, TSK, T2Y, T2Y, KTT T312S ■ Matte tan topcoat ✱ Recommended Ribbon: 1330-0619-10 ■ Withstands surface mount board processes on either the top ✱ ) Alternative printers and ribbons are or bottom side of the board. available for special applications. ■ Product approved for aerospace/defense applications. Contact Tyco Electronics for more ■ Low outgassing information. TSK ■ High opacity gloss white topcoat. ■ Withstands surface mount board processes on either the top Part Numbering System or bottom side of the board. ■ Deemed to be a static safe product in accordance with T1K-044033-10-9 EIA 625, EIA 541. Test methods employed were in accordance with EOS/ESD S11.11. ■ Ideal for auto apply applications. Color T2Y Pack Size ■ High opacity gloss white topcoat. Label Height (mm) ■ Economic alternative to T1K material. Label Width (mm) ■ Withstands surface mount board processes on either the top or Product Family bottom side of the board – can also be used on the top side of the board in mixed processes, but it is not recommended for the bottom side which is directly exposed to the wave solder environment. 104 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Labels ® Kapton Labels (continued) Ordering Information Dimensions (mm) Product Package Labels Label Width Label Height Horizontal Repeat Vertical Repeat Web Width Order Code Quantity Across A B C D E T1K-044033-10-9 10,000 20 04.4 3.3 04.4 09.5 92.4 T1K-064064-25-9 25,000 12 06.4 6.4 06.4 09.5 82.2 T1K-080080-10-9 10,000 08 08.0 8.0 09.9 13.3 83.3 T1K-095080-25-9 25,000 05 09.5 8.0 12.2 12.7 64.3 T1K-095095-10-9 10,000 07 09.5 9.5 11.1 12.7 82.1 T1K-127032-10-9 10,000 05 12.7 3.2 19.1 03.2 94.9 T1K-127111-10-9 10,000 05 12.7 11.10 16.8 14.3 86.0 T1K-127127-10-9 10,000 05 12.7 12.70 15.9 15.9 82.6 T1K-165051-25-9 25,000 04 16.5 5.1 17.8 08.3 75.8 T1K-171171-10-9 10,000 05 17.1 17.10 19.7 20.3 101.80 T1K-178095-10-9 10,000 04 17.8 9.5 19.1 12.7 80.9 T1K-191064-10-9 10,000 04 19.1 6.4 21.6 09.5 89.9 T1K-229064-10-9 10,000 03 22.9 6.4 28.6 09.5 86.0 T1K-254045-10-9 10,000 03 25.4 4.6 31.8 08.5 95.3 T1K-254064-10-9 10,000 03 25.4 6.4 27.9 09.5 87.3 T1K-254097-10-9 10,000 03 25.4 9.7 27.9 12.7 87.4 T1K-254127-10-9 10,000 03 25.4 12.70 27.9 16.9 87.4 T1K-254254-10-9 10,000 03 25.4 25.40 27.9 28.6 87.4 T1K-305047-10-9 10,000 02 30.5 4.7 33.0 07.8 69.5 T1K-318064-10-9 10,000 01 31.8 6.4 N/A 09.5 37.9 T1K-381020-10-9 10,000 01 38.1 2.0 N/A 10.7 44.1 T1K-381127-5-9 05,000 02 38.1 12.70 44.2 15.9 88.2 T1K-381381-2.5-9 02,500 02 38.1 38.10 44.5 40.8 88.9 T1K-445064-10-9 10,000 01 44.5 6.4 N/A 09.5 50.4 T1K-445102-5-9 05,000 01 44.5 10.20 N/A 12.7 50.4 T1K-508064-10-9 10,000 01 50.8 6.4 N/A 09.5 56.9 T1K-508095-5-9 05,000 01 50.8 9.5 N/A 12.7 57.2 T1K-508127-5-9 05,000 01 50.8 12.70 N/A 15.9 56.9 ® ✱ ) Note: Kapton /Polyimide Labels Not Compatible with T200 Printers. All specifications subject to change. Consult Tyco Electronics for latest specifications. 105 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Labels WP White Polyester Labels WP White Polyester Labels Tyco Electronics WP is a thermal transfer printable white polyester film with a permanent acrylic adhesive. It is ideal for bar coding, PCB and component labeling, as well as general purpose labeling applications that require a high durability white label. WP is resistant to a variety of solvents while maintaining print quality. It is UL Listed and CSA Certified, and print performance and durability are reliable when used with Tyco Electronics’s RHD series ribbon. Features and Benefits ■ Thermal transfer printable ■ Excellent for use in PCB component labeling ■ Ink receptive topcoat ■ Excellent for bar code applications ■ UL Listed and CSA Certified Specifications: TTDS-073 Part Numbering System Adhesive: Permanent Acrylic WP-040040-10-9 Service Temperature: –40 °C to +150 °C ✱ Recommended Printer: T308S ✱ Recommended Ribbon: 1330-0607-10 Color ✱ ) Alternative printers and ribbons are Pack Size available for special applications. Label Height (mm) Contact Tyco Electronics for more information. Label Width (mm) Product Family Ordering Information 106 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Labels WP White Polyester Labels (continued) Dimensions (mm) Product Package Labels Label Width Label Height Horizontal Repeat Vertical Repeat Web Width Order Code Quantity Across A B C D E WP-040040-25-9 25,000 20 04.0 04.0 04.0 07.2 86.0 WP-064064-25-9 25,000 12 06.4 06.4 06.4 09.5 82.2 ✱ WP-080080-10-9 10,000 08 08.0 08.0 09.9 13.3 83.3 WP-089047-10-9 10,000 05 08.9 04.7 11.4 07.9 60.6 WP-095080-25-9 25,000 05 09.5 08.0 12.2 12.7 64.3 WP-095095-10-9 10,000 07 09.5 09.5 11.1 12.7 82.1 WP-127111-10-9 10,000 05 12.7 11.1 16.8 14.3 86.0 WP-127127-10-9 10,000 05 12.7 12.7 15.9 15.9 82.6 ✱ WP-165051-25-9 25,000 04 16.5 05.1 17.8 08.3 75.8 WP-165102-10-9 10,000 05 16.5 10.2 19.1 13.8 99.1 WP-171171-10-9 10,000 05 17.1 17.1 19.7 20.3 101.80 ✱ WP-178095-10-9 10,000 04 17.8 09.5 19.1 12.7 80.9 ✱ WP-191064-10-9 10,000 04 19.1 06.4 21.6 09.5 89.9 WP-191114-15-9 15,000 03 19.1 11.4 22.2 14.7 69.5 ✱ WP-203127-10-9 10,000 04 20.3 12.7 22.9 15.9 94.6 WP-229064-10-9 10,000 03 22.9 06.4 28.6 09.5 86.0 WP-254045-10-9 10,000 03 25.4 04.6 31.8 08.5 95.3 WP-254064-10-9 10,000 03 25.4 06.4 27.9 09.5 87.3 WP-254097-10-9 10,000 03 25.4 09.7 27.9 12.7 87.4 WP-254127-10-9 10,000 03 25.4 12.7 27.9 16.9 87.4 WP-254254-10-9 10,000 03 25.4 25.4 27.9 28.6 87.4 ✱ WP-305047-10-9 10,000 02 30.5 04.7 33.0 07.8 69.5 WP-318064-10-9 10,000 01 31.8 06.4 N/A 09.5 37.9 WP-318097-10-9 10,000 01 31.8 09.7 N/A 12.7 37.8 WP-381064-10-9 10,000 01 38.1 06.4 N/A 09.5 44.5 ✱ WP-381127-5-9 05,000 02 38.1 12.7 44.2 15.9 88.2 WP-381191-5-9 05,000 02 38.1 19.1 43.2 22.2 87.6 ✱ WP-381381-2.5-9 02,500 02 38.1 38.1 44.5 40.8 88.9 ✱ WP-381635-5-9 05,000 02 38.1 63.5 40.6 66.7 84.7 ✱ WP-406254-1.5-9 01,500 02 40.6 25.4 55.9 38.1 102.90 WP-445064-10-9 10,000 01 44.5 06.4 N/A 09.5 50.4 WP-445102-5-9 05,000 01 44.5 10.2 N/A 12.7 50.4 WP-445445-2-9 02,000 01 44.5 44.5 N/A 47.6 50.4 WP-478175-5-9 05,000 01 47.8 17.5 N/A 24.4 66.0 WP-508064-10-9 10,000 01 50.8 06.4 N/A 09.5 56.9 WP-508095-5-9 05,000 01 50.8 09.5 N/A 12.7 57.2 WP-508127-5-9 05,000 01 50.8 12.7 N/A 15.9 56.9 WP-508254-5-9 05,000 01 50.8 25.4 N/A 28.6 57.2 WP-508318-2.5-9 02,500 01 50.8 31.8 N/A 34.9 56.9 WP-508508-3-9 03,000 01 50.8 50.8 N/A 54.6 54.0 WP-523841-1.5-9 01,500 01 52.3 84.1 N/A 88.9 58.2 WP-610419-2.5-9 02,500 01 61.0 41.9 N/A 45.5 67.3 WP-699191-5-9 05,000 01 69.9 19.1 N/A 23.3 76.2 WP-699254-5-9 05,000 01 69.9 25.4 N/A 28.6 76.2 WP-762254-5-9 05,000 01 76.2 25.4 N/A 28.6 82.3 WP-762381-2.5-9 02,500 01 76.2 38.1 N/A 41.3 82.3 WP-762508-2.5-9 02,500 01 76.2 50.8 N/A 54.0 82.6 WP-762127-1-9 01,000 01 76.2 127.00 N/A 129.50 79.4 WP-101508-2.5-9 02,500 01 101.60 50.8 N/A 54.6 104.10 WP-101635-2.5-9 02,500 01 101.60 63.5 N/A 66.7 107.70 WP-101762-1.8-9 01,800 01 101.60 76.2 N/A 79.40 104.10 WP-101101-1.3-9 01,300 01 101.60 101.60 N/A 104.80 104.10 WP-101165-0.85-9 00,850 01 101.60 165.10 N/A 168.30 104.90 ✱ ) Note: Standard Format Not Compatible with T200 Printers. All specifications subject to change. Consult Tyco Electronics for latest specifications. 107 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Engineering Notes 108 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 147873-1 97 2-338123-2 8 619213-1 38 4-1437565-1 95 147873-2 97 2-338123-3 8 619214-1 38 4-1437565-2 95 147873-3 97 2-338123-4 8 619217-1 38 4-1437565-9 95 2-292292-4 10 2-338123-5 8 619229-1 54 5-1437565-0 95 2-292292-5 10 2-338123-6 8 619231-1 36 8-1437565-0 96 2-292292-6 10 2-338123-7 8 619238-2 54 8-1437565-1 96 2-292292-7 10 2-338123-8 8 900688-1 39 1437566-3 97 2-292292-8 10 2-338123-9 8 900712-1 39 1437566-4 97 2-292292-9 10 3-338123-0 8 900795-1 39 9-1442000-8 51 3-292292-0 10 3-338123-1 8 900905-1 39 6-1442001-0 51 3-292292-1 10 3-338123-2 8 900965-1 39 6-1442001-3 51 292331-1 41 3-338123-3 8 900971-1 39 8-1442001-6 51 292331-2 41 3-338123-4 8 900988-1 39 1-1442002-5 51 292331-3 41 3-338123-5 8 1279154-1 39 6-1442002-7 55 292331-5 41 3-338123-6 8 1377032-2 16, 17 7-1442002-1 55 2-292373-6 10 3-338123-7 8 1377032-3 16, 17 7-1442002-2 55 2-292373-7 10 3-338123-8 8 1-1377227-9 7 7-1442002-3 55 2-292373-8 10 3-338123-9 8 2-1377227-0 7 9-1442002-7 51 2-292373-9 10 4-338123-0 8 2-1377227-1 7 2-1442003-2 51 3-292373-0 10 338610-1 25 2-1377227-2 7 3-1442003-2 50 3-292373-1 10 338966-9 21 2-1377227-3 7 5-1442003-9 51 3-292373-2 10 1-338967-2 21 2-1377227-4 7 1442004-1 54 292448-1 41 338970-1 31 2-1377227-5 7 1447009-5 30 1-338063-9 7 368555-1 23 2-1377227-6 7 1447009-6 30 2-338063-0 7 368560-1 23 2-1377227-7 7 1447009-8 30 2-338063-1 7 368565-1 23 2-1377227-8 7 1447360-9 30 2-338063-2 7 368637-3 27 2-1377227-9 7 1-1447360-1 30 2-338063-3 7 440217-1 16 1470033-1 16 3-1377227-0 7 2-338063-4 7 440217-2 16 3-1377227-1 7 1470139-1 25 2-338063-5 7 440297-1 25 3-1377227-2 7 1470139-2 25 2-338063-6 7 440297-2 25 3-1377227-3 7 1470139-3 25 2-338063-7 7 440297-3 25 3-1377227-4 7 1470164-1 16 2-338063-8 7 440297-4 25 3-1377227-5 7 1470177-1 17 2-338063-9 7 440343-1 16 3-1377227-6 7 1470177-2 17 3-338063-0 7 440423-1 30 3-1377227-7 7 1470332-1 25 3-338063-1 7 440430-1 30 3-1377227-8 7 1470636-1 16 3-338063-2 7 440432-1 30 3-1377227-9 7 1470778-1 16 3-338063-3 7 5-619028-2 35 4-1377227-0 7 1470864-1 25 3-338063-4 7 619052-1 34 1377269-2 39 1470964-1 16 3-338063-5 7 619061-1 33 1437259-6 30 1-1483288-9 7 3-338063-6 7 619062-1 33 1-1437565-6 95 2-1483288-0 7 3-338063-7 7 619068-1 34 1-1437565-7 95 2-1483288-1 7 3-338063-8 7 619072-1 33 1-1437565-8 95 2-1483288-2 7 3-338063-9 7 5-619078-2 35 1-1437565-9 95 2-1483288-3 7 4-338063-0 7 619196-1 37 2-1437565-7 95 2-1483288-4 7 1-338123-9 8 619201-1 36 2-1437565-8 95 2-1483288-5 7 2-338123-0 8 619210-1 37 2-1437565-9 95 2-1483288-6 7 2-338123-1 8 5-619211-1 37 3-1437565-0 95 2-1483288-7 7 All specifications subject to change. Consult Tyco Electronics for latest specifications. 109 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 2-1483288-8 7 1565322-1 30 1-1705300-6 9 1734205-1 18 2-1483288-9 7 1571262-1 99 1-1705300-7 9 1-1734205-1 18 3-1483288-0 7 1571262-2 99 1-1705300-8 9 3-1734205-1 18 3-1483288-1 7 1571294-1 95 1-1705300-9 9 4-1734205-1 18 3-1483288-2 7 1571294-2 95 2-1705300-0 9 1734234-1 25 3-1483288-3 7 1571294-3 95 2-1705300-1 9 1734234-2 25 3-1483288-4 7 1571294-4 95 2-1705300-2 9 1734234-3 25 3-1483288-5 7 1571296-1 95 2-1705300-3 9 1734234-4 25 3-1483288-6 7 1571296-2 95 2-1705300-4 9 1734300-1 30 3-1483288-7 7 1571299-2 97 1705336-2 32 1734472-1 25 3-1483288-8 7 1571299-4 97 1705448-1 99 1734472-2 25 3-1483288-9 7 1571407-1 95 1-1705615-3 10 1734472-3 25 4-1483288-0 7 1571407-2 95 1-1705615-4 10 1-1734472-1 25 1-1483437-9 7 1571527-1 95 1-1705615-5 10 1-1734472-2 25 2-1483437-0 7 1571527-2 95 1-1705615-6 10 1-1734472-3 25 2-1483437-1 7 1571563-1 95 1-1705615-7 10 1746116-1 39 2-1483437-2 7 1571563-2 95 1-1705615-8 10 1746136-1 30 2-1483437-3 7 1571563-3 95 1-1705615-9 10 1746142-1 42 2-1483437-4 7 1571563-4 95 2-1705615-0 10 1746223-1 22 2-1483437-5 7 1-1571563-1 95 1705795-1 39 1746237-1 15 2-1483437-6 7 1-1571563-2 95 1-1705813-2 12 1746237-2 15 2-1483437-7 7 1571598-2 97 1-1705813-3 12 1746237-3 15 2-1483437-8 7 1571625-5 95 1-1705813-4 12 1746237-4 15 2-1483437-9 7 1571625-6 95 1-1705813-5 12 1746237-5 15 3-1483437-0 7 1571626-5 95 1-1705813-6 12 1746237-6 15 3-1483437-1 7 1571626-6 95 1-1705813-7 12 1746237-7 15 3-1483437-2 7 1571636-5 95 1-1705813-8 12 1746237-8 15 1571636-6 95 1-1705813-9 12 1746237-9 15 3-1483437-3 7 3-1483437-4 7 1612493-1 39 1717017-1 39 1-1746237-0 15 3-1483437-5 7 1612534-1 46 1717029-1 39 1-1746237-1 15 3-1483437-6 7 1612537-1 46 1717169-1 22 1-1746237-2 15 3-1483437-7 7 1612633-1 22 1717257-1 39 1-1746237-3 15 3-1483437-8 7 1612634-1 22 1717273-1 42 1-1746237-4 15 3-1483437-9 7 1612681-1 39 1717294-1 39 1-1746237-5 15 4-1483437-0 7 1612898-1 43 1717312-1 22 1-1746237-6 15 1483596-1 17 1612901-1 43 1717400-1 39 1-1746237-7 15 1483596-2 17 1674162-1 25 1717406-1 42 1-1746237-8 15 1483748-1 30 1674319-1 25 1717413-1 42 1-1746237-9 15 1483940-1 39 1674432-1 22 1717431-1 25 2-1746237-0 15 1483960-1 39 1674783-1 39 1717562-1 42 2-1746237-1 15 1496476-1 18 1674787-1 22 1717838-1 42 2-1746237-2 15 1496476-2 18 1674977-1 39 1717989-1 39 2-1746237-3 15 1496476-3 18 1674977-2 39 1720028-2 30 2-1746237-4 15 1496476-4 18 1705030-1 39 1734035-1 19 1746716-1 22 1496476-5 18 1705058-1 16 1734035-3 19 1746717-1 22 1496476-6 18 1705130-1 39 1734035-4 19 1746730-1 39 1496476-8 18 1705254-1 39 1-1734035-1 19 1746750-1 39 1565158-1 30 1-1705300-5 9 1-1734035-3 19 1746751-1 39 110 All specifications subject to change. Consult Tyco Electronics for latest specifications. Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 1746773-1 39 1-1827674-4 15 2-1871274-2 14 1871583-4 25 1746931-1 39 1-1827674-5 15 2-1871274-4 14 1871602-1 25, 26 1747103-1 39 1-1827674-6 15 2-1871274-8 14 1871602-2 25, 26 1747124-2 22 1-1827674-7 15 3-1871274-0 14 1871813-1 42 1747129-1 42 1-1827674-8 15 4-1871274-0 14 1871916-1 25 1747314-1 10 1-1827674-9 15 4-1871274-6 14 1903290-1 28 1-1747769-0 14 2-1827674-0 15 5-1871274-0 14 1903302-1 25 1-1747769-2 14 2-1827674-1 15 5-1871274-4 14 1939053-1 20 1-1747769-6 14 2-1827674-2 15 5-1871274-6 14 1939054-1 20 2-1747769-0 14 2-1827674-3 15 6-1871274-0 14 1981568-1 20 2-1747769-2 14 2-1827674-4 15 7-1871274-0 14 1981584-1 20 2-1747769-4 14 1827827-1 15 8-1871274-0 14 1981812-1 47 2-1747769-8 14 1827827-2 15 1-1871275-0 14 1981813-1 47 3-1747769-0 14 1827827-3 15 1-1871275-2 14 1981898-1 11 4-1747769-6 14 1827827-4 15 1-1871275-6 14 5338979-1 21 5-1747769-0 14 1827827-5 15 2-1871275-0 14 5338979-2 21 5-1747769-4 14 1827827-6 15 2-1871275-2 14 5338980-1 21 5-1747769-6 14 1827827-7 15 2-1871275-4 14 5338982-1 21 6-1747769-0 14 1827827-8 15 2-1871275-8 14 5338982-2 21 7-1747769-0 14 1827827-9 15 3-1871275-0 14 6337194-1 40 8-1747769-0 14 1-1827827-0 15 4-1871275-0 14 1750516-1 18 1-1827827-1 15 4-1871275-6 14 1775012-1 25 1-1827827-2 15 5-1871275-0 14 1775055-1 19 1-1827827-3 15 5-1871275-4 14 1775059-1 25 1-1827827-4 15 5-1871275-6 14 1775067-1 25 1-1827827-5 15 6-1871275-0 14 1775204-1 25 1-1827827-6 15 7-1871275-0 14 1775250-1 16 1-1827827-7 15 8-1871275-0 14 1825534-1 98 1-1827827-8 15 1871406-1 10 1827000-1 42 1-1827827-9 15 1-1871566-0 14 1827034-1 25 2-1827827-0 15 1-1871566-2 14 1827349-1 22 2-1827827-1 15 1-1871566-6 14 1827465-1 12 2-1827827-2 15 2-1871566-0 14 1827541-1 23 2-1827827-3 15 2-1871566-2 14 1827546-1 23 2-1827827-4 15 2-1871566-4 14 1827674-1 15 1827928-1 42 2-1871566-8 14 1827674-2 15 1857118-1 13 3-1871566-0 14 1827674-3 15 1857258-1 44 4-1871566-0 14 1827674-4 15 1857346-1 45 4-1871566-6 14 1827674-5 15 1857353-1 17 5-1871566-0 14 1827674-6 15 1857353-2 17 5-1871566-4 14 1827674-7 15 1857724-4 30 5-1871566-6 14 1827674-8 15 1871250-3 25 6-1871566-0 14 1827674-9 15 1871250-4 25 7-1871566-0 14 1-1827674-0 15 1-1871274-0 14 8-1871566-0 14 1-1827674-1 15 1-1871274-2 14 1871583-1 25 1-1827674-2 15 1-1871274-6 14 1871583-2 25 1-1827674-3 15 2-1871274-0 14 1871583-3 25 All specifications subject to change. Consult Tyco Electronics for latest specifications. 111 Products for Mobile Equipment Catalog 1654270-2 Revised 8-2007 Engineering Notes 112 All specifications subject to change. Consult Tyco Electronics for latest specifications. Global Contacts Americas Argentina – Buenos Aires Canada – Toronto Mexico – Mexico City United States Phone: +54-11-4733-2200 Phone: +905-475-6222 Phone: +52-55-1106-0800 Harrisburg, PA Fax: +54-11-4733-2211 Fax: +905-474-5520 +01-800-733-8926 Phone: +1-717-564-0100 Product Information Center: Fax: +52-55-1106-0901 Fax: +1-717-986-7575 Brasil – São Paulo Phone: +905-470-4425 Product Information Center: Phone: +55-11-3611-1311 Fax: +905-474-5525 Phone: +1-800-522-6752 Fax: +55-11-3611-0397 For Latin/South American Fax: +1-717-986-7575 Colombia – Bogota Countries not shown Troy, MI Phone: +57-1-231-9398 Phone: +54-11-4733-2015 Phone: +1-248-273-3359 Fax: +57-1-660-0206 Fax: +54-11-4733-2083 Fax: +1-248-273-3322 Asia/Pacific Australia – Sydney Japan – Kawasaki, Kanagawa New Zealand – Auckland Singapore – Singapore Phone: +61-2-9554-2600 Phone: +81-44-844-8111 Phone: +64-9-634-4580 Phone: +65-6482-0311 Fax: +61-2-9502-2556 Fax: +81-44-812-3207 Fax: +64-9-634-4586 Fax: +65-6482-1012 Product Information Center: Product Information Center: Philippines – Makati City Taiwan – Taipei Phone: +61-2-9840-8200 Phone: +81-44-844-8013 Phone: +632-848-0171 Phone: +886-2-8768-2788 Fax: +61-2-9634-6188 Fax: +81-44-812-3200 Fax: +632-867-8661 Fax: +886-2-8768-2268 India – Bangalore Korea – Seoul People’s Republic of China Thailand – Bangkok Phone: +91-80-285-40800 Phone: +82-2-3415-4500 Hong Kong Phone: +66-2-955-0500 Fax: +91-80-285-40820 Fax: +82-2-3486-3810 Phone: +852-2735-1628 Fax: +66-2-955-0505 Indonesia – Jakarta Malaysia – Selangor Fax: +852-2735-0243 Vietnam – Ho Chi Minh City Phone: +65-6482-0311 Phone: +60-3-7805-3055 Shanghai Phone: +84-8-930-5546 Fax: +65-6482-1012 Fax: +60-3-7805-3066 Phone: +86-21-2407-1588 Fax: +84-8-930-3443 Fax: +86-21-2407-1599 Europe/Middle East/Africa Austria – Vienna France – Cergy-Pontoise Cedex Lithuania and Latvia South Africa – Port Elizabeth Phone: +43-1-905-60-0 Phone: +33-1-3420-8888 Lithuania – Vilnius Phone: +27-41-503-4500 Fax: +43-1-905-60-1333 Fax: +33-1-3420-8600 Phone: +370-5-213-1402 Fax: +27-41-581-0440 Product Information Center: Product Information Center: Fax: +370-5-213-1403 Spain – Barcelona Phone: +43-1-905-60-1249 Phone: +33-1-3420-8686 Product Information Center: Phone: +34-93-291-0330 Fax: +43-1-905-60-1251 Fax: +33-1-3420-8623 Phone: +370-5-211-3016 Fax: +34-93-201-7879 Fax: +370-5-213-1403 Belgium – Kessel-Lo France Export Divisions – Sweden – Upplands Väsby Phone: +32-16-352-300 Cergy-Pontoise Cedex Netherlands – ’s-Hertogenbosch Phone: +46-8-50-72-50-00 Fax: +32-16-352-352 Phone: +33-1-3420-8808 Phone: +31-73-6246-246 Fax: +46-8-50-72-50-01 Fax: +33-1-3420-8300 Fax: +31-73-6212-365 Bulgaria – Sofia Product Information Center: Switzerland – Steinach Phone: +359-2-971-2152 Germany – Bensheim Phone: +31-73-6246-999 Phone: +41-71-447-0447 Fax: +359-2-971-2153 Phone: +49-6251-133-0 Fax: +31-73-6246-998 Fax: +41-71-447-0444 Fax: +49-6251-133-1600 Czech Republic and Slovakia Product Information Center: Norway – Nesbru Turkey – Istanbul Czech Republic – Kurim Phone: +49-6251-133-1999 Phone: +47-66-77-88-50 Phone: +90-212-281-8181-83 Phone: +420-541-162-111 Fax: +49-6251-133-1988 Fax: +47-66-77-88-55 +90-212-282-5130/5430 Fax: +420-541-162-223 Fax: +90-212-281-8184 Product Information Center: Greece – Athens Poland – Warsaw Phone: +420-541-162-113 Phone: +30-210-9370-396/397 Phone: +48-22-4576-700 Ukraine – Kiev Fax: +420-541-162-132 Fax: +30-210-9370-655 Fax: +48-22-4576-720 Phone: +380-44-206-2265 Product Information Center: Fax: +380-44-206-2264 Denmark – Glostrup Hungary – Budapest Phone: +48-22-4576-704 Product Information Center: Phone: +45-43-48-04-00 Phone: +36-1-289-1000 Fax: +48-22-4576-720 Phone: +380-44-206-2265 Fax: +45-43-44-14-14 Fax: +36-1-289-1010 Fax: +380-44-206-2264 Product Information Center: Romania – Bucharest Egypt – Cairo Phone: +36-1-289-1016 Phone: +40-21-311-3479/3596 United Kingdom – Phone: +202-419-2334 Fax: +36-1-289-1017 Fax: +40-21-312-0574 Stanmore, Middlesex Fax: +202-417-7647 Phone: +44-8706-080208 Ireland – Dublin Russia – Moscow Estonia – Tartu Fax: +44-208-954-6234 Phone: +353-1-866-5612 Phone: +7-495-790-7902 Phone: +372-5138-274 Product Information Center: Fax: +353-1-866-5714 Fax: +7-495-721-1893 Fax: +372-7400-779 Freephone (UK only): Product Information Center: Israel – Petach-Tikva +0800-267-666 Phone: +7-495-790-7902-502 Finland – Helsinki Phone: +972-3-929-0999 Phone: +44-8706-080208 Fax: +7-495-721-1893 Phone: +358-95-12-34-20 Fax: +972-3-919-1088 Fax: +44-208-420-8095 Fax: +358-95-12-34-250 Russia – St. Petersburg Italy – Collegno (Torino) Phone: +7-812-718-8192 Phone: +39-011-4012-111 Fax: +7-812-718-8193 Fax: +39-011-4031-116 Product Information Center: Slovenia – Ljubljana Phone: +39-011-4012-428 Phone: +386-1561-3270 Fax: +39-011-40-287-428 Fax: +386-1561-3240 www.tycoelectronics.com Tyco Electronics AMP GmbH AMPèrestr. 12–14 64625 Bensheim / Germany Phone: +49-(0)6251-133-0 Fax: +49-(0)6251-133-1600 www.tycoelectronics.com AMP, ELASTIBOOT, KAPTON, LAMFRAME, M/A-COM, RAYCHEM, STAX, TE Logo and Tyco Electronics are trademarks © 2007 Tyco Electronics Ltd. 1654270-2 Revised 8-2007 5M ST