Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Chapter 4 – Issued 3-2010. Introduction MCON Interconnection System offers High Reliability for Long Term Use The New Generation MCON MCON Contact System MCON Connectors Connector System is designed ■ Base material with high ■ High reliability status for electronic and electrical current capacity supported for long term use applications in motor vehicles. ■ 8 defined contact points ■ High vibration level supported It fullfils all requirements for for increased reliability ■ Perfect design to avoid a connector system for use in ■ Improved vibration quality problems, reduce automobiles and covers a resistance manufacturing and service wide range of applications. cost ■ Good guiding inside the cavity ■ Integrated secondary locking device delivered in ■ Protected contact spring pre-locked position due to the closed box ■ Wire-to-wire sealed and ■ Overstress protection of the unsealed connectors (SWS) contact springs ■ Wire-to-board sealed and ■ Box with polarization and unsealed connectors (SWS) secondary locking feature ■ Polarization, several keyings ■ Protected locking lance OBSOLETE ■ Locking mechanism for smaller connectors/mating aid for higher numbers of ways NOT the LATEST REVISION All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-1 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Chapter 4 – Issued 3-2010. Engineering Notes All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-2 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Contact System Chapter 4 – Issued 3-2010. Introduction MCON Tabs and Receptacles for Fast and Economical Application The MCON New Generation ■ Protection of the contact The Main Advantages of the Tabs and receptacles can be Contact System is mainly used springs MCON Contact System are: applied in both sealed and in the automotive industry. unsealed connectors. ■ No over elongation of the ■ Base material with high Each contact consists of a flat contact springs possible current capacity MCON contacts can be fast receptacle, which mates with under normal circumstances ■ 8 or more defined contact and economically arranged to a flat tab. Base material of ■ No possibility to connect points for increased reliability the lead using Tyco Electronics contact spring and body is from the rear side application tooling. ■ Improved vibration copper alloy. ■ Protection against resistance The two-piece contact design mechanical damage ■ Good guiding inside the means that the electrical and ■ Good guiding in the cavity cavity mechanical properties are ■ Secondary locking possible ■ Protected contact spring separated. One end of the (from 3 directions) due to the closed box contact body is crimped to wire and the other end mates ■ Assembly into housing ■ Overstress protection of the with the matching tab. fully-automatically contact springs ■ Box with secondary locking feature ■ Protected locking lance All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-3 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 MCON-1.2 mm Contact System Chapter 4 – Issued 3-2010. Receptacle Contacts – Locking Lance (LL) Technical Features Contact Material: CuSn0.15/0.2; Insert Spring: CuNiSi Contact Finish: 0.2 Tin-silver plated, selective silver plated, selective gold plated 2.4 1.83 Wire Size Range: 2 0.14–0.22 mm , 2 0.25–0.35 mm , 2 0.50–0.75 mm , 15.0–16.5 2 1.00–1.50 mm Current Carrying Capacity: up to 20 Ampere (at 20 °C ambient temperature) Temperature Range: –40 °C ... +140 °C (tin-silver plated) 1.83 –40 °C ... +140 °C (silver plated) –40 °C ... +150 °C (gold plated) Contact Resistance: 7.25 New State �2 m� ● Mating Cycles: up to 20 cycles (tin-silver plated) up to 50 cycles (silver plated) up to 100 cycles (gold plated) Dimension of Male Contacts: ±0.1 ±0.03 (1.2 x 0.6 mm) Extraction Tool: Modular Dimensions (Centerline): Part No. 5-1579007-3 2 max. 0.75 mm 2.5 x 2.5 mm 2 Mating Force: max. 1.0 mm 2.5 x 3.0 mm sealed 4.0 x 4.0 mm; sealed staggered 3.5 x 4.0 mm, Max. 5 N cavity 3.55 mm diameter Unmating Force: 2 max. 1.5 mm 2.5 x 3.5 mm sealed 4.5 x 4.5 mm; Max. 2.5 N 3.0 x 3.5 mm sealed staggered 4.0 x 4.5 mm, Product Group Drawing: cavity 3.95 mm diameter 1452674 Product Specification: 108-18782 Application Specification: 114-18464 ● ) Mating Cycles are depending on various technical influences and must be clarified in each individual case. All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-4 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 MCON-1.2 mm Contact System Chapter 4 – Issued 3-2010. Receptacle Contacts – Locking Lance (LL) (continued) Standard Receptacle Contacts (SRC) Part Numbers Insulation Diameter Wire Size Material (mm) Range ✱ and Finish Strip Package Loose- Package � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR � � 0.25–0.35 – 1.10–1.75 -1 / -2 / -3 1452653 10,000 1452654 500 x-1528156-x 2063574-x � � 0.50–0.75 – 1.4–1.9 -1 / -2 / -3 1452656 8,000 1452657 500 x-1528157-x 2063570-x � � 1.0–1.5 – 1.9–2.4 -1 / -2 / -3 1452659 8,000 1452660 500 x-1528159-x 2063575-x Receptacle Contacts with Single Wire Sealing System (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range ✱ and Finish Strip Package Loose- Package � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR � � 0.25–0.35 – 1.10–1.75 -1 / -2 / -3 1452665 6,500 1452666 500 x-1528161-x 2063573-x 0.50–0.75 – 1.4–1.9 -1 / -2 / -3 1452668 6,500 1452669 500 x-1528162-x 2063537-1 1.0–1.5 – 1.9–2.4 -1 / -2 / -3 1452671 6,500 1452672 500 x-1528163-x 2119104-1 ✱ ) Material and Finish: � � xxx-1 = CuNiSi, pre-tin/silver plated Note: All part numbers are ) The pre- and suffix for the ) On request. xxx-2 = CuNiSi, selective gold plated RoHS and ELV compliant. applicators depends on the xxx-3 = CuNiSi, selective silver plated applied termination equipment. Receptacle Contacts with Short Circuit Area Part Numbers Insulation Diameter Wire Size (mm) Material Range ✱ Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.5 – 1.4–1.7 -1 1563888 8,000 1563889 500 x-1528944-x 2119105-1 ✱ ) Material and Finish: � xxx-1 = CuNiSi, selective gold plated Note: All part numbers are ) The pre- and suffix for the RoHS and ELV compliant. applicators depends on the applied termination equipment. All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-5 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 MCON-1.2 mm Contact System Chapter 4 – Issued 3-2010. Receptacle Contacts – Clean Body (CB) Technical Features Contact Material: 0.22 CuSn0.15/0.2; Insert Spring: CuNiSi 2.4 1.83 Contact Finish: Tin-silver plated, selective silver plated, selective gold plated Wire Size Range: 2 2 0.14–0.22 mm , 0.25–0.35 mm , 15.0–16.5 2 2 0.50–0.75 mm , 1.00–1.50 mm Current Carrying Capacity: up to 20 Ampere (at 20 °C ambient temperature) Temperature Range: –40 °C ... +140 °C (tin-silver plated) –40 °C ... +140 °C (silver plated) 1.83 –40 °C ... +150 °C (gold plated) Contact Resistance: New State �2 m� ● 7.25 Mating Cycles: up to 20 cycles (tin-silver plated) up to 50 cycles (silver plated) up to 100 cycles (gold plated) Dimension of Male Contacts: Modular Dimensions (Centerline): Product Group Drawing: 2 ±0.1 ±0.03 max. 0.75 mm 2.5 x 2.5 mm (1.2 x 0.6 mm) 1534326 2 max. 1.0 mm 2.5 x 3.0 mm sealed 4.0 x 4.0 mm; Extraction Tools depend on the sealed staggered 3.5 x 4.0 mm, Product Specification: Terminal/Housing Combination cavity 3.55 mm diameter 108-18782 – Typically: 2 max. 1.5 mm 2.5 x 3.5 mm sealed 4.5 x 4.5 mm; Part Nos. 1579007-8 and 3.0 x 3.5 mm sealed staggered 4.0 x 4.5 mm, Application Specification: 1-1579007-0 (Secondary Lock) cavity 3.95 mm diameter 114-18464 Mating Force: Max. 5 N ● Unmating Force: Max. 2.5 N ) Mating Cycles are depending on various technical influences and must be clarified in each individual case. Standard Receptacle Contacts (SRC) Part Numbers Insulation Diameter Wire Size (mm) Material Range ✱ Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR � � 0.25–0.35 – 1.10–1.75 -1 / -2 / -3 1534594 10,000 1534595 500 x-1528147-x 2119107-x � � #1670144# 8,000 #1670145# 500 x-1528673-x 2119108-x 0.50–0.75 – 1.4–1.9 -1 / -2 / -3 � � 1394897 8,000 1534063 500 x-1528148-x 2063676-x � � 1.0–1.5 – 1.9–2.4 -1 / -2 / -3 1452503 8,000 1452504 500 x-1528150-x 2063565-x Receptacle Contacts with Single Wire Sealing System (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range ✱ and Finish Strip Package Loose- Package � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR � � 0.14–0.22 – 1.05–1.20 -1 / -2 / -3 1418841 6,500 – – x-1528151-x 2119109-x � � 0.25–0.35 – 1.10–1.75 -1 / -2 / -3 1418844 6,500 1418845 500 x-1528152-x 2119110-x � � #1670146# 6,500 #1670147# 500 x-1528674-x 2119111-x 0.50–0.75 – 1.4–1.9 -1 / -2 / -3 � � 1418847 6,500 1418848 500 x-1528153-x 2119112-x � � 1.0–1.5 – 1.9–2.4 -1 / -2 / -3 1418850 6,500 1418851 500 x-1528154-x 2119113-x ✱ ) Material and Finish: #) CAUTION: Future Strip Form Orders will be replaced. � � ) On request. xxx-1 = CuNiSi, pre-tin/silver plated ) The pre- and suffix for the Because of change of the wire crimp at the new Part Nos. xxx-2 = CuNiSi, selective gold plated applicators depends on the 1670144 and 1670146 they will be processed with new crimp xxx-3 = CuNiSi, selective silver plated applied termination equipment. heights. See latest Application Specification 114-18464. All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-6 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 MCON-1.2 mm Contact System Chapter 4 – Issued 3-2010. Tab Contacts – Locking Lance (LL) Technical Features Contact Material: 9.2 16.3–16.8 CuNiSi; Insert Tab: CuSn0.15/0.2 Contact Finish: 0.2 Tin-silver plated, selective silver plated, selective gold plated 0.63 Wire Size Range: 2.4 1.83 2 0.14–0.22 mm , 2 0.25–0.35 mm , 2 0.50–0.75 mm , 2 1.00–1.50 mm 7.5 Extraction Tool: Part No. 5-1579007-3 1.2 1.83 Product Group Drawing: 1418754 Product Specification: 108-18782 Application Specification: Modular Dimensions (Centerline): 2 114-18464 max. 0.75 mm 2.5 x 2.5 mm 2 max. 1.0 mm 2.5 x 3.0 mm sealed 4.0 x 4.0 mm; sealed staggered 3.5 x 4.0 mm, cavity 3.55 mm diameter 2 max. 1.5 mm 2.5 x 3.5 mm sealed 4.5 x 4.5 mm; 3.0 x 3.5 mm sealed staggered 4.0 x 4.5 mm, cavity 3.95 mm diameter Standard Tab Contacts Part Numbers Insulation Diameter Wire Size (mm) Material Range ✱ Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR � � 0.14–0.22 – 1.05–1.20 -1 / -2 / -3 1418756 9,000 1418757 500 x-1528427-x 2119102-x � � 0.25–0.35 – 1.10–1.75 -1 / -2 / -3 1418758 9,000 1418759 500 x-1528428-x 2063574-x � � 0.50–0.75 – 1.4–1.9 -1 / -2 / -3 1418760 8,000 1418761 500 x-1528506-x 2063570-x � � 1.0–1.5 – 1.9–2.4 -1 / -2 / -3 1418762 7,000 1418763 500 x-1528507-x 2063575-x Tab Contacts with Single Wire Sealing System (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range ✱ Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.14–0.22 – 1.05–1.20 -1 / -2 / -3 1718756 6,500 – – x-1528508-x 2119103-1 � � 0.25–0.35 – 1.10–1.75 -1 / -2 / -3 1718758 6,500 1718759 500 x-1528509-x 2063573-x 0.50–0.75 – 1.4–1.9 -1 / -2 / -3 1718760 6,000 1718761 500 x-1528510-x 2063537-1 1.0–1.5 – 1.9–2.4 -1 / -2 / -3 1718762 6,000 1718763 500 x-1528511-x 2119104-1 ✱ ) Material and Finish: � � xxx-1 = CuNiSi, pre-tin Note: All part numbers are ) The pre- and suffix for the ) On request. xxx-2 = CuNiSi, selective gold plated RoHS and ELV compliant. applicators depends on the xxx-3 = CuNiSi, selective silver plated applied termination equipment. All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-7 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 MCON-1.2 mm Contact System Chapter 4 – Issued 3-2010. Tab Contacts – Clean Body (CB) Technical Features Contact Material: CuSn0.15/0.2; Insert Tab: CuSn0.15/0.2 9.2 15.3 Contact Finish: Tin-silver plated, selective silver plated, selective gold plated 0.2 Wire Size Range: 2 0.25–0.35 mm , 2 0.50–0.75 mm 0.63 2.4 1.83 Modular Dimensions (Centerline): 2 max. 0.75 mm 2.5 x 2.5 mm 7.5 2 max. 1.0 mm 2.5 x 3.0 mm 2 max. 1.5 mm 2.5 x 3.5 mm 3.0 x 3.5 mm Product Group Drawing: 1718398 1.2 1.83 Product Specification: 108-18782 Application Specification: 114-18464 Standard Tab Contacts Part Numbers Insulation Diameter Wire Size (mm) Material Range ✱ Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR � � 0.25–0.35 – 1.10–1.75 -1 / -2 / -3 1718348 9,000 1703698 500 x-1528156-x 2063574-x � � 0.50–0.75 – 1.4–1.9 -1 / -2 / -3 1718350 8,000 1718390 500 x-1528157-x 2063570-x ✱ ) Material and Finish: � � xxx-1 = CuNiSi, pre-tin Note: All part numbers are ) The pre- and suffix for the ) On request. xxx-2 = CuNiSi, selective gold plated RoHS and ELV compliant. applicators depends on the xxx-3 = CuNiSi, selective silver plated applied termination equipment. All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-8 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 MCON-1.2 mm Contact System Chapter 4 – Issued 3-2010. Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for MCON Contact System (Cavity Diameter 3.55 mm and 3.95 mm) 3.1 2.6 4.1 0.8 8.5 3.1 2.6 4.7 0.8 8.6 Cavity Diameter 3.55 mm Insulation Diameter Package Color Part Number FLK FLR Quantity (mm) (mm) – 0.9–1.4 Yellow 967067-2 20,000 – 1.4–2.1 Green 967067-1 20,000 Sealing Plug Blue 967056-1 5,000 Cavity Diameter 3.95 mm Insulation Diameter Package Color Part Number FLK FLR Quantity (mm) (mm) – 0.9–1.9 Gray 963142-2 20,000 – 1.9–2.4 Green 967067-1 20,000 Sealing Plug White 963143-1 20,000 All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-9 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 MCON-2.8 mm Contact System Chapter 4 – Issued 3-2010. Receptacle Contacts Technical Features 17.5–20.0 Contact Material: CuSn0.15/0.2; 7.3 Insertion Spring: CuNiSi 5.55 Contact Finish: Tin-silver plated, selective silver plated Wire Size Range: 2 3.8 2.5 0.20–0.35 mm , 2 0.50 mm , 2 0.75–1.00 mm , 2 �1.0–2.5 mm 2 �2.5–4.0 mm Extraction Tool: Part No. 5-1579008-2 4.3 Product Group Drawing: 1719797 Product Specification: 108-94002 Application Specification: Modular Dimensions (Centerline): 2 114-18718 max. 2.5 mm 5.0 x 5.5 mm sealed 5.5 x 5.5 mm staggered 4.5 x 5.5 mm sealed staggered 5.0 x 5.5 mm cavity diameter 4.9 mm 2 max. 4.0 mm 5.5 x 5.5 mm sealed 7.2 x 7.2 mm staggered 5.0 x 5.5 mm sealed staggered 6.0 x 7.2 mm cavity diameter 6.4 mm Standard Receptacle Contacts Part Numbers Insulation Diameter Wire Size Material (mm) Range ✱ and Finish Strip Package Loose- Package � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR � � 0.20–0.35 – 1.15–1.40 -1 / -3 1719836 2,500 1719837 500 x-1528691-x 2119119-x 0.50 – 1.4–1.6 -1 / -3 1563719 2,500 1563720 500 x-1528899-x � � 2119120-x 0.75–1.00 – 1.7–2.1 -1 / -3 1719838 2,500 1719839 500 x-1528632-x � � >1.0–2.5> – 2.2–3.0 -1 / -3 1719840 2,500 1719841 500 x-1528633-x 2119121-x � � >2.5–4.0> – 3.4–3.7 -1 / -3 1718475 2,500 1718477 500 x-1528585-x 2119122-x Receptacle Contacts with Single Wire Sealing System (SWS) Part Numbers Insulation Diameter Wire Size (mm) Material Range ✱ Strip Package Loose- Package and Finish � � 2 Applicator Hand Tool (mm ) Form Quantity Piece Quantity FLK FLR 0.50 – 1.4–1.6 -1 / -3 1563935 2,500 1563936 500 – – � � 0.75–1.00 – 1.7–2.1 -1 / -3 1670802 2,500 1670803 500 x-1528773-x 2119123-x � � >1.0–2.5> – 2.2–3.0 -1 / -3 1670804 2,500 1670805 500 x-1528774-x 2119124-x � � >2.5–4.0> – 3.4–3.7 -1 / -3 1670806 2,500 1670807 500 x-1528775-x 2119125-x ✱ � � ) Material and Finish: Note: All part numbers are ) The pre- and suffix for the ) On request. RoHS and ELV compliant. applicators depends on the xxx-1 = CuNiSi, pre-tin/silver plated applied termination equipment. xxx-3 = CuNiSi, selective silver plated All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-10 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 MCON-2.8 mm Contact System Chapter 4 – Issued 3-2010. Single Wire Seals and Sealing Plugs Single Wire Seals and Sealing Plugs for MCON Contact System (Cavity Diameter 4.9 mm 4.3 and 6.4 mm) A � 3.4 7.8 Cavity Diameter 4.9 mm Wire Size Insulation Diameter Package Range Diameter Color A Part Number Quantity (mm) (mm) (mm) 828904-1 1,000 0.75–1.00 1.4–2.1 Blue 5.6 828904-2 10,000 >1.5–2.5> 2.2–3.0 White 5.6 828905-1 10,000 Sealing Plug Natural 5.6 828922-1 10,000 Cavity Diameter 6.4 mm Wire Size Insulation Diameter Package Range Diameter Color A Part Number Quantity (mm) (mm) (mm) >2.5–4.0> 3.4–3.7 Green 7.2 828985-1 5,000 Sealing Plug Brown 7.2 828986-1 5,000 All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-11 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Chapter 4 – Issued 3-2010. Engineering Notes All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-12 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Introduction MCON Connectors offer Highest Reliability for Use in the Automotive Industry The New Generation MCON Features Connector System offers ■ CPA (Connector Position ■ Wire-to-Wire sealed and receptacle and tab housings Assurance) capability unsealed connectors (SWS) with capability for waterproof- ■ High reliability status ■ Wire-to-Board sealed and ing and resistance to condi- supported for long term use unsealed connectors (SWS) tions of extreme vibration. ■ High vibration level ■ Polarization, several keyings The system is designed for supported ■ Locking mechanism for electronic and electrical ■ Perfect design to avoid smaller connectors/mating applications in motor vehicles, quality problems, reduce aid for higher numbers of where vibrations and mecha- manufacturing and service ways nical stress, in the long term, cost can affect the quality on the ■ Integrated secondary contact system. locking device delivered in pre-locked position All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-13 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 2 Positions Housing Material: PA66-GF15 Wire Size Range: 2 1.0 mm 26.5 Product Specification: 108-18969 Application Specification: 114-18861 4.0 14.9 15.0 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical 2 A Black 1-1718643-1 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-14 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 2 Positions Housing Material: PA66 GF15 Wire Size Range: 2 1.0 mm 26.5 Product Specification: 108-18969 Application Specification: 114-18861 4.0 11.0 18.8 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical 2 A Black 1-1718811-1 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-15 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 2 Positions Housing Material: PA66-GF30/PA6-GF15 Wire Size Range: 2 1.0 mm 26.5 Product Specification: 108-18969 Application Specification: 114-18861 4.0 11.0 18.8 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical 2 A Black 1-1564440-1 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-16 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 2 Positions Housing Material: PA66-GF30/PA6-GF15 Wire Size Range: 2 1.0 mm 26.5 Product Specification: 108-18969 Application Specification: 114-18861 4.0 14.8 15.0 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical 2 A Black 1-1670915-1 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-17 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 2 Positions Housing Material: PA66-GF30/PA6-GF15 Wire Size Range: 2 1.0 mm 26.5 Product Specification: 108-18969 Application Specification: 114-18861 4.0 14.8 15.0 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1-1670916-1 – 1-1703498-1 – – 2 B Natural 2-1670916-1 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-18 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Tab Housings for Locking Lance Contacts Technical Features 8.6 No. of Positions: 2 Positions Housing Material: PBT-GF30 Wire Size Range: 2 1.0 mm Product Specification: 44.0 –– Application Specification: 114-18910-1 14.8 14.95 Sealed 1.2 mm Tab Housings Part Numbers No. of Keying Housing Tab Mating Mating PCB Header Positions Options Color Cover Housing Receptacle Housing Right-Angle Vertical 2 A Black 1-1703498-1 – 1-1670916-1 – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-19 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Tab Housings for Locking Lance Contacts Technical Features 8.6 No. of Positions: 2 Positions Housing Material: PBT-GF30 Wire Size Range: 2 1.0 mm Product Specification: 44.0 –– Application Specification: 114-18910-1 14.8 17.05 Sealed 1.2 mm Tab Housings Part Numbers No. of Keying Housing Tab Mating Mating PCB Header Positions Options Color Cover Housing Receptacle Housing Right-Angle Vertical 2 A Black 1-1703498-2 – 1-1670916-1 – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-20 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 3 Positions Housing Material: PA66-GF15 Wire Size Range: 2 1.0 mm 26.5 Product Specification: 108-18969 Application Specification: 114-18861 4.0 11.0 19.0 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical 3 A Black 1-1718644-1 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-21 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 3 Positions Housing Material: PA66-GF15 Wire Size Range: 2 1.0 mm 26.5 Product Specification: 108-18969 Application Specification: 114-18861 4.0 11.0 22.8 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical 3 A Black 1-1718812-2 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-22 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 3 Positions Housing Material: PA66-GF30/PA6-GF15 Wire Size Range: 2 1.0 mm 26.5 Product Specification: 108-18969 Application Specification: 114-18861 4.0 14.8 19.0 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1-1670917-1 – 1-1703494-1 – – 3 B Natural 2-1670917-1 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-23 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Tab Housings for Locking Lance Contacts Technical Features 8.6 No. of Positions: 3 Positions Housing Material: PBT-GF30 Wire Size Range: 2 1.0 mm Product Specification: 44.0 –– Application Specification: 114-18910-1 18.8 14.95 Sealed 1.2 mm Tab Housings Part Numbers No. of Keying Housing Tab Mating Mating PCB Header Positions Options Color Cover Housing Receptacle Housing Right-Angle Vertical 3 A Black 1-1703494-1 – 1-1670917-1 – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-24 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Tab Housings for Locking Lance Contacts Technical Features 8.6 No. of Positions: 3 Positions Housing Material: PBT-GF30 Wire Size Range: 2 1.0 mm Product Specification: 44.0 –– Application Specification: 114-18910-1 18.8 14.95 Sealed 1.2 mm Tab Housings Part Numbers No. of Keying Housing Tab Mating Mating PCB Header Positions Options Color Cover Housing Receptacle Housing Right-Angle Vertical 3 A Black 1-1703494-2 – 1-1670917-1 – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-25 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 4 Positions Housing Material: PA66-GF15 Wire Size Range: 2 26.5 1.0 mm Product Specification: 108-18969 Application Specification: 114-18861 4.0 16.5 24.7 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical 4 A Black 1-1718645-1 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-26 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 4 Positions Housing Material: PA66-GF30/PA6-GF15 Wire Size Range: 2 26.5 1.0 mm Product Specification: 108-18969 Application Specification: 114-18861 4.0 16.5 24.7 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1-1670918-1 – 1-1564559-1 – – 4 B Natural 2-1670918-1 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-27 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Tab Housings for Locking Lance Contacts Technical Features 21.9 9.9 No. of Positions: 4 Positions Housing Material: PBT-GF30 Wire Size Range: 2 1.0 mm Product Specification: 44.0 –– Application Specification: 114-18910-1 16.3 Sealed 1.2 mm Tab Housings Part Numbers No. of Keying Housing Tab Mating Mating PCB Header Positions Options Color Cover Housing Receptacle Housing Right-Angle Vertical 4 A Black 1-1564559-1 – 1-1670918-1 – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-28 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Tab Housings for Locking Lance Contacts Technical Features 21.9 9.9 No. of Positions: 4 Positions Housing Material: PBT-GF30 Wire Size Range: 2 1.0 mm Product Specification: 44.0 –– Application Specification: 114-18910-1 18.1 Sealed 1.2 mm Tab Housings Part Numbers No. of Keying Housing Tab Mating Mating PCB Header Positions Options Color Cover Housing Receptacle Housing Right-Angle Vertical 4 A Black 1-1564559-2 – 1-1670918-1 – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-29 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 5 Positions Housing Material: PA66-GF15 Wire Size Range: 2 26.5 1.0 mm Product Specification: 108-18969 Application Specification: 114-18861 4.0 16.5 28.7 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical 5 A Black 1-1718806-1 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-30 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 5 Positions Housing Material: PA66-GF30/PA6-GF15 Wire Size Range: 2 1.0 mm 26.5 Product Specification: 108-18969 Application Specification: 114-18861 4.0 16.5 28.7 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1-1670921-1 5 –– –– B Natural 2-1670921-1 All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-31 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 6 Positions Housing Material: PA66-GF15 Wire Size Range: 2 26.5 1.0 mm Product Specification: 108-18969 Application Specification: 114-18861 4.0 16.5 32.7 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical 6 A Black 1-1718646-1 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-32 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Locking Lance Contacts Technical Features No. of Positions: 6 Positions Housing Material: PA66-GF30/PA6-GF15 Wire Size Range: 2 26.5 1.0 mm Product Specification: 108-18969 Application Specification: 114-18861 4.0 16.5 32.7 Sealed 1.2 mm Receptacle Housings Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical 6 A Black 1-1670919-1 – – – – All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-33 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Clean Body Contacts Technical Features No. of Positions: 2 Positions Housing Material: PA66-GF15 for outer housing, PA66-GF35 for inner housing Wire Size Range: 26.5 2 0.5–1.5 mm Product Specification: –– Application Specification: 408-8928 ● For use with Clean Body 4.0 Contacts Numbers 1418847 and 1418850. ● Can be used with or without CPA (Connector Position Assurance). 15.8 15.0 Sealed 1.2 mm Receptacle Housings – Standard Latch without CPA Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1-1924067-1 2 B Natural 1-1924067-2 – – – – C Blue 1-1924067-3 Sealed 1.2 mm Receptacle Housings – Standard Latch with CPA Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1-1924067-4 2 B Natural 1-1924067-5 – – – – C Blue 1-1924067-6 All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-34 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Clean Body Contacts Technical Features No. of Positions: 3 Positions Housing Material: PA66-GF35 Wire Size Range: 26.5 2 0.5–1.5 mm Product Specification: –– Application Specification: 408-8928 ● For use with Clean Body Contacts Numbers 1418847 and 1418850. 4.0 ● Can be used with or without CPA (Connector Position Assurance). ● Blocked circuits versions 15.6 are available (see customer drawing for released options). 19.0 Sealed 1.2 mm Receptacle Housings – Standard Latch without CPA Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1488991-1 B Natural 1488991-2 3 –– –– C Blue 1488991-3 D Gray 1488991-4 Sealed 1.2 mm Receptacle Housings – Standard Latch with CPA Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1488991-5 B Natural 1488991-6 3 –– –– C Blue 1488991-7 D Gray 1488991-8 All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-35 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Clean Body Contacts Technical Features No. of Positions: 3 Positions Housing Material: PA66-GF35 Wire Size Range: 2 0.5–1.5 mm 26.5 Product Specification: –– Application Specification: 408-8928 ● For use with Clean Body Contacts Numbers 1418847 and 1418850. ● 4.0 Can be used with or without CPA (Connector Position Assurance). ● Blocked circuits versions 11.0 are available (see customer drawing for released options). 23.8 Sealed 1.2 mm Receptacle Housings – Low Profile Latch without CPA Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1488992-1 B Natural 1488992-2 3 –– –– C Blue 1488992-3 D Gray 1488992-4 Sealed 1.2 mm Receptacle Housings – Low Profile Latch with CPA Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1488992-5 B Natural 1488992-6 3 –– –– C Blue 1488992-7 D Gray 1488992-8 All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-36 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Clean Body Contacts Technical Features No. of Positions: 4 Positions Housing Material: PA66-GF15 for outer housing, PA66-GF35 for inner housing 26.5 Wire Size Range: 2 0.5–1.5 mm Product Specification: –– Application Specification: 408-8928 ● For use with Clean Body 4.0 Contacts Numbers 1418847 and 1418850. ● Can be used with or without CPA (Connector Position 17.5 Assurance). ● Blocked circuits versions are available (see customer drawing for released options). 24.7 Sealed 1.2 mm Receptacle Housings – Standard Latch without CPA Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1-1456426-1 B Natural 1-1456426-2 4 –– –– C Blue 1-1456426-3 D Gray 1-1456426-4 Sealed 1.2 mm Receptacle Housings – Standard Latch with CPA Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1-1456426-5 B Natural 1-1456426-6 4 –– –– C Blue 1-1456426-7 D Gray 1-1456426-8 All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-37 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Housing and Connectors Chapter 4 – Issued 3-2010. Sealed 1.2 mm Receptacle Housings for Clean Body Contacts Technical Features No. of Positions: 6 Positions Housing Material: PA66-GF15 for outer housing, PA66-GF35 for inner housing 26.5 Wire Size Range: 2 0.5–1.5 mm Product Specification: –– Application Specification: 408-8928 4.0 ● For use with Clean Body Contacts Numbers 1418847 and 1418850. ● Can be used with or without CPA (Connector Position 17.5 Assurance). ● Blocked circuits versions are available (see customer drawing for released options). 32.7 Sealed 1.2 mm Receptacle Housings – Standard Latch without CPA Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1924292-1 B Natural 1924292-2 6 –– –– C Blue 1924292-3 D Gray 1924292-4 Sealed 1.2 mm Receptacle Housings – Standard Latch with CPA Part Numbers No. of Keying Housing Receptacle Mating Mating PCB Header Positions Options Color Cover Housing Tab Housing Right-Angle Vertical A Black 1924292-5 B Natural 1924292-6 6 –– –– C Blue 1924292-7 D Gray 1924292-8 All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-38 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Chapter 4 – Issued 3-2010. Numerical Index Part Number Page Part Number Page Part Number Page Part Number Page 828904-1 4-11 1418847-3 4-60 1452672-1 4-50 1579007-8 4-60 828904-2 4-11 1418848-1 4-60 1452672-2 4-50 1-1579007-0 4-60 828905-1 4-11 1418848-2 4-60 1452672-3 4-50 5-1579007-3 4-4,0 4-70 828922-1 4-11 1418848-3 4-60 1-1456426-1 4-37 5-1579008-2 4-10 828985-1 4-11 1418850-1 4-60 1-1456426-2 4-37 1670144-1 4-60 828986-1 4-11 1418850-2 4-60 1-1456426-3 4-37 1670144-2 4-60 963142-2 4-90 1418850-3 4-60 1-1456426-4 4-37 1670144-3 4-60 963143-1 4-90 1418851-1 4-60 1-1456426-5 4-37 1670145-1 4-60 967056-1 4-90 1418851-2 4-60 1-1456426-6 4-37 1670145-2 4-60 967067-1 4-90 1418851-3 4-60 1-1456426-7 4-37 1670145-3 4-60 967067-2 4-90 1452503-1 4-60 1-1456426-8 4-37 1670146-1 4-60 1394897-1 4-60 1452503-2 4-60 1488991-1 4-35 1670146-2 4-60 1394897-2 4-60 1452503-3 4-60 1488991-2 4-35 1670146-3 4-60 1394897-3 4-60 1452504-1 4-60 1488991-3 4-35 1670147-1 4-60 1418756-1 4-70 1452504-2 4-60 1488991-4 4-35 1670147-2 4-60 1418756-2 4-70 1452504-3 4-60 1488991-5 4-35 1670147-3 4-60 1418756-3 4-70 1452653-1 4-50 1488991-6 4-35 1670802-1 4-10 1418757-1 4-70 1452653-2 4-50 1488991-7 4-35 1670802-3 4-10 1418757-2 4-70 1452653-3 4-50 1488991-8 4-35 1670803-1 4-10 1418757-3 4-70 1452654-1 4-50 1488992-1 4-36 1670803-3 4-10 1418758-1 4-70 1452654-2 4-50 1488992-2 4-36 1670804-1 4-10 1418758-2 4-70 1452654-3 4-50 1488992-3 4-36 1670804-3 4-10 1418758-3 4-70 1452656-1 4-50 1488992-4 4-36 1670805-1 4-10 1418759-1 4-70 1452656-2 4-50 1488992-5 4-36 1670805-3 4-10 1418759-2 4-70 1452656-3 4-50 1488992-6 4-36 1670806-1 4-10 1418759-3 4-70 1452657-1 4-50 1488992-7 4-36 1670806-3 4-10 1418760-1 4-70 1452657-2 4-50 1488992-8 4-36 1670807-1 4-10 1418760-2 4-70 1452657-3 4-50 1534063-1 4-60 1670807-3 4-10 1418760-3 4-70 1452659-1 4-50 1534063-2 4-60 1-1670915-1 4-17 1418761-1 4-70 1452659-2 4-50 1534063-3 4-60 1-1670916-1 4-18, 4-19, 1418761-2 4-70 1452659-3 4-50 1534594-1 4-60 4-20 1418761-3 4-70 1452660-1 4-50 1534594-2 4-60 2-1670916-1 4-18 1418762-1 4-70 1452660-2 4-50 1534594-3 4-60 1-1670917-1 4-23, 4-24, 1418762-2 4-70 1452660-3 4-50 1534595-1 4-60 4-25 1418762-3 4-70 1452665-1 4-50 1534595-2 4-60 2-1670917-1 4-23 1418763-1 4-70 1452665-2 4-50 1534595-3 4-60 1-1670918-1 4-27, 4-29 1418763-2 4-70 1452665-3 4-50 1563719-1 4-10 2-1670918-1 4-27 1418763-3 4-70 1452666-1 4-50 1563719-3 4-10 1-1670919-1 4-33 1418841-1 4-60 1452666-2 4-50 1563720-1 4-10 1-1670921-1 4-31 1418841-2 4-60 1452666-3 4-50 1563720-3 4-10 2-1670921-1 4-31 1418841-3 4-60 1452668-1 4-50 1563888-1 4-50 1-1703494-1 4-23, 4-24 1418844-1 4-60 1452668-2 4-50 1563889-1 4-50 1-1703494-2 4-25 1418844-2 4-60 1452668-3 4-50 1563935-1 4-10 1-1703498-1 4-18, 4-19 1418844-3 4-60 1452669-1 4-50 1563935-3 4-10 1-1703498-2 4-20 1418845-1 4-60 1452669-2 4-50 1563936-1 4-10 1703698-1 4-80 1418845-2 4-60 1452669-3 4-50 1563936-3 4-10 1703698-2 4-80 1418845-3 4-60 1452671-1 4-50 1-1564440-1 4-16 1703698-3 4-80 1418847-1 4-60 1452671-2 4-50 1-1564559-1 4-27, 4-28 1718348-1 4-80 1418847-2 4-60 1452671-3 4-50 1-1564559-2 4-29 1718348-2 4-80 All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-39 Section Catalog 1308070-2. Revised 12-2009. MCON Interconnection System Main Catalog 1654400-1 Chapter 4 – Issued 3-2010. Numerical Index Part Number Page Part Number Page Part Number Page 1718348-3 4-80 1718759-3 4-70 1719839-3 4-10 1718350-1 4-80 1718760-1 4-70 1719840-1 4-10 1718350-2 4-80 1718760-2 4-70 1719840-3 4-10 1718350-3 4-80 1718760-3 4-70 1719841-1 4-10 1718390-1 4-80 1718761-1 4-70 1719841-3 4-10 1718390-2 4-80 1718761-2 4-70 1-1924067-1 4-34 1718390-3 4-80 1718761-3 4-70 1-1924067-2 4-34 1718475-1 4-10 1718762-1 4-70 1-1924067-3 4-34 1718475-3 4-10 1718762-2 4-70 1-1924067-4 4-34 1718477-1 4-10 1718762-3 4-70 1-1924067-5 4-34 1718477-3 4-10 1718763-1 4-70 1-1924067-6 4-34 1-1718643-1 4-14 1718763-2 4-70 1924292-1 4-38 1-1718644-1 4-21 1718763-3 4-70 1924292-2 4-38 1-1718645-1 4-26 1-1718806-1 4-30 1924292-3 4-38 1-1718646-1 4-32 1-1718811-1 4-15 1924292-4 4-38 1718756-1 4-70 1-1718812-2 4-22 1924292-5 4-38 1718756-2 4-70 1719836-1 4-10 1924292-6 4-38 1718756-3 4-70 1719836-3 4-10 1924292-7 4-38 1718758-1 4-70 1719837-1 4-10 1924292-8 4-38 1718758-2 4-70 1719837-3 4-10 2063537-1 4-5,0 4-70 1718758-3 4-70 1719838-1 4-10 2119103-1 4-70 1718759-1 4-70 1719838-3 4-10 2119104-1 4-5,0 4-70 1718759-2 4-70 1719839-1 4-10 2119105-1 4-50 Disclaimer While Tyco Electronics and its affiliates referenced herein have made every reasonable effort to ensure the accuracy of the information contained in this catalog, Tyco Electronics cannot assure that this information is error free. For this reason, Tyco Electronics does not make any representation or offer any guarantee that such information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information at any time. Tyco Electronics expressly disclaims any implied warranty regarding the information contained herein, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. Tyco Electronics’ only obligations are those stated in Tyco Electronics’ Standard Terms and Conditions of Sale. Tyco Electronics will in no case be liable for any incidental, indirect or consequential damages arising from or in connection with, including, but not limited to, the sale, resale, use or misuse of its products. Users should rely on their own judgment to evaluate the suitability of a product for a certain purpose and test each product for its intended application. In case of any potential ambiguities or questions, please don’t hesitate to contact us for clarification. www.tycoelectronics.com www.tycoelectronics.com/automotive AMP, TE (Logo) and Tyco Electronics are trademarks of the Tyco Electronics Group of Companies and its Licensors. All specifications subject to change. Consult Tyco Electronics for latest specifications. 4-40