Electronics Finder

Description

Electromechanical Relay 12VDC 390Ohm 1A DPDT(10.38x9.4x7.11)mm THT High Frequency Relay
1617104-2

Part Number

1617104-2

Price

Request Quote

Manufacturer

TE CONNECTIVITY

Lead Time

Request Quote

Category

Relays and I/O Modules » Relay Other

Specifications

Manufacturer

TE Connectivity

Manufacturers Part #

1617104-2

Industry Aliases

MW6-12P

Sub-Category

Other Relays

Brand

Raychem Wire and Tubing

Factory Pack Quantity

Datasheet

DDEController?Action=srchrtrv&DocNm=5-1773450-5_Section2&DocType=CS&DocLang=EN.pdf

344 KiB

Download

Extracted Text

CII High Frequency, Low Signal Relays CII High Frequency, Low Signal Relays Table of Contents CII MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Double Pole, Electrically Held, 1 Amp and Less Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-2 MW3 & MW3HP Models, 3 GHz Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3, 2-4 MW4 & MW4HP Models, 4 GHz Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-5, 2-6 MW6 & MW6HP Models, 6 GHz Switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-7, 2-8 2 2–1 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. CII High Frequency, Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less MW3 / MW4 / MW6 / MW3HP / MW4HP / MW6HP Series Relays Microwave Switching, Hermetically Sealed, DPDT Product Facts n Excellent signal isolation, stable insertion loss and low VSWR n Provide repeatable RF performance at frequencies up to the 3 GHz. level (MW3/MW3HP), 4 GHz. level (MW4/MW4HP) & 6 GHz. level (MW6/MW6HP) n Standard versions for applications ranging from wireless communications to precision high-speed test equipment n High performance (HP) versions for use under more demanding environmental conditions These CII relays provide High performance models Signal isolation is 18dB at 6 n Standard or sensitive (S) microwave frequency (MW3HP, MW4HP and GHz. (MW6/MW6HP), 18dB coils are offered in a range switching in a hermetically MW6HP) offer extended at 4 GHz. (MW4/MW4HP), of DC input voltages sealed, subminiature temperature ratings of and 22dB at 3 GHz. n 2 Form C (DPDT) contacts package. -65°C to +125°C while (MW3/MW3HP). rated low-level to 1 amp providing 30G’s vibration Both standard and high Insertion loss is 0.38dB for and 100G’s shock (75G’s n Extended mechanical life performance models are MW6/MW6HP, 0.27dB for for MW3) environmental expectancy of 10 million offered in 3 GHz., 4 GHz. MW4/MW4HP, and 0.36dB ratings. operations and 6 GHz. types. for MW3/MW3HP. All are available with either n Robust, hermetically sealed Standard models (MW3, VSWR is a low 1.30:1 @ standard or sensitive DC enclosure MW4 and MW6) perform in 6GHz. for MW6/MW6HP, coils. Nominal coil power temperature ranges from 1.36:1 @ 4GHz. for is 367-500mW (model -55°C to +85°C and with- MW4/MW4HP, and 1.24:1 dependent) for standard stand 10G vibration and @ 3GHz. for MW3/MW3HP. coils and 169-250mW for 30G shock. sensitive coils. 2–2 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. CII High Frequency, Low Signal Relays CII High Frequency, Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) Microwave Switching, Hermetically Sealed, DPDT MW3 & MW3HP Models 3 GHz. Switching Electrical Characteristics Contact Ratings Contact Arrangement — Contact Operations Type Load Min. 2 Form C (DPDT) 1.0A @ 28VDC Resistive 100,000 Contact Resistance — 200mA @ 28VDC (300mH)* Inductive 100,000 2 Before life — 100 milliohms, max. (measured @ 10 mA @ 6 VDC) 30μA @ 50mVDC Low Level 10,000,000 After life — 200 milliohms, max. * The inductive rating is only applicable to high performance models (MW3HP and MW3HPS). (measured @ 1 A @ 28 VDC) Mechanical Life Expectancy — 10 million operations Coil Voltages — 5, 12, 18 & 26.5 VDC (MW3) 5, 6, 9, 12, 18 & 26.5 VDC (MW3HP) Coil Data Coil Power (mW max. @ 25°C) — MW3 Models MW3 MW3S MW3HP MW3HPS Nominal Coil Resistance Pickup Voltage Nominal Maximum Coil 675 565 673 563 Coil Voltage In Ohms VDC (Max.) Coil Power Coil Desig. (VDC) ±20% @ 25°C @ 25°C (mW) @ 25°C Voltage Duty Cycle — Continuous Standard Coil Pick-up Voltage — 5.0 50 3.6 500 5.8 5 MW3 — Approx 70% of nominal. 12.0 390 8.4 369 16.0 12 MW3HP — Approx 50% of nominal. 18.0 880 13.0 368 24.0 18 Pick-up Sensitivity (mW max. @ 26.5 1,560 17.0 450 32.0 26 25°C) — MW3 MW3S MW3HP MW3HPS Sensitive Coil 180 90 146 68 5.0 100 3.5 250 7.5 5 12.0 850 9.0 169 20.0 12 18.0 1,600 13.5 203 30.0 18 Operating Characteristics 26.5 3,300 18.0 213 40.0 26 Operate Time (ms max.) — MW3HP (High Performance) Models MW3 MW3S MW3HP MW3HPS Nominal Coil Res. Pickup V Release V Release V Nominal Maximum 4.0 6.0 2.0 4.0 Coil Coil Voltage in Ohms VDC (Max.) VDC (Max.) VDC (Min.) Coil Power Coil Desig. Release Time (ms max.) (VDC) ±10% @ 25°C @25°C @25°C @25°C (mW) @25°C Voltage MW3 MW3S MW3HP MW3HPS Standard Coil 3.0 3.0 1.5 2.0 5.0 50 2.7 1.4 0.22 500 5.8 5 Bounce Time (ms max.) 6.0 98 3.5 2.0 0.28 367 8.0 6 MW3 MW3S MW3HP MW3HPS 9.0 220 5.3 3.0 0.54 368 12.0 9 —— 1.5 1.5 12.0 390 7.0 4.0 0.63 369 16.0 12 Dielectric Withstanding Voltage — 18.0 880 10.5 6.0 0.91 368 24.0 18 Between Open Contacts, 26.5 1,560 14.2 8.0 1.37 450 32.0 26 Between Adjacent Contacts and Between Sensitive Coil Contacts and Coil — 5.0 100 2.6 1.4 0.23 250 7.5 5 MW3 types — 350 Vrms, 60 Hz. 6.0 200 3.4 2.0 0.28 180 10.0 6 MW3HP types — 500 Vrms, 60 Hz. 9.0 400 4.85 3.0 0.55 203 15.0 9 Insulation Resistance — 12.0 850 7.0 4.0 0.64 169 20.0 12 1,000 megohms @ 500 VDC 18.0 1,600 9.8 6.0 0.92 203 30.0 18 26.5 3,300 14.0 8.0 1.4 213 40.0 26 Environmental Characteristics Temperature Range — MW3 types — -55°C to +85°C. MW3HP types — -65°C to +125°C. Weight — MW3, MW3HP: 0.09 oz. (2.55 g) MW3S, MW3HPS: 0.12 oz. (3.40 g). Vibration Resistance — MW3 types — 10 G’s, 10-500 Hz. MW3HP types — 30 G’s, 10-3,000 Hz Shock Resistance — MW3 types — 30 G’s, 6 ± 1 ms. MW3HP types — 75 G’s, 6 ± 1 ms. 2–3 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. CII High Frequency, Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) Microwave Switching, Hermetically Sealed, DPDT MW3 & MW3HP Models, 3 GHz. Switching (Continued) Insertion Loss & VSWR: NO Contacts Insertion Loss & VSWR: NC Contacts Isolation (dB) (dB) VSWR (dB) VSWR 0.0 2.0 0.0 2.0 0 1.9 1.9 0.1 0.1 INSERTION LOSS INSERTION LOSS 1.8 1.8 0.2 0.2 -10 0.3 1.7 0.3 1.7 0.4 1.6 0.4 1.6 -20 0.5 1.5 0.5 1.5 ISOLATION 0.6 1.4 0.6 1.4 -30 0.7 1.3 0.7 1.3 0.8 1.2 0.8 1.2 -40 VSWR VSWR 1.1 1.1 0.9 0.9 1.0 1.0 1.0 1.0 -50 0 0.5 1.0 1.5 2.0 2.5 3.0 0 0.5 1.0 1.5 2.0 2.5 3.0 0 0.5 1.0 1.5 2.0 2.5 3.0 FREQUENCY (GHz) FREQUENCY (GHz) FREQUENCY (GHz) Test Conditions Test Board — 0.031" double sided Temperature — Room ambient. copper clad, PTFE based laminate. Signal Strength — 0 dBm. Connections — Relay header is sol- Notes: dered to ground place. Relay terminals 1. Unused terminals were terminated are soldered to through holes. SMA con- with 50 ohm impedance load. nectors are soldered to circuit traces. 2. All readings are typical. Enclosures Header .335 (8.51) DIA MAX .370 (9.40) DIA MAX .370 (9.40) DIA MAX ± ± .035 .010 .035 .010 .335 (8.51) DIA MAX .031 ± .003 .031 ± .003 (0.89) (0.89) (0.79) (0.79) GROUND PIN (OPTIONAL) .385 (9.78) MAX .275 (6.99) MAX .200 DIA .200 DIA + + 36° 3° 36° 3° (5.08) (5.08) TERMINAL GROUND PIN A = .750 MIN (19.05) (OPTIONAL) P = .187±.010 (4.75±.25) Ground Pin Ground Pin Position “G” Position “E” +.002 +.002 .017 (0.43) DIA .017 (0.43) DIA -.001 -.001 For other ground pin configurations consult factory. .370 (9.40) DIA MAX .370 (9.40) DIA MAX Header and Terminal Finish: Nickel plated on MW3 & MW3S. MW3S / MW3HPS MW3 / MW3HP Tin-lead plated on MW3HP & MW3HPS. Part Numbering System Typical Part Number MW3 S – 5 AG Wiring Diagram Series: MW3 = 3 GHz. switching relay MW3HP = High performance 3 GHz. switching relay Coil Sensitivity: Leave Blank = Standard Coil S = Sensitive Coil Coil Designator: 5 = 5VDC 6 = 6VDC† 9 = 9VDC† 12 = 12VDC 18 = 18VDC 26 = 26.5VDC † 6 and 9 volt coil only available on high performance models. Terminal Length: Terminal View A = 0.750 in (19.05 mm) P = 0.187 ± 0.010 in (4.75 ± 0.25 mm) Ground Pin Position (see header drawings above): G = Opposite locating tab E = Near locating tab. Consult factory for other ground pin configurations. 2–4 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. CII High Frequency, Low Signal Relays CII High Frequency, Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) Microwave Switching, Hermetically Sealed, DPDT MW4 & MW4HP Models 4 GHz. Switching Electrical Characteristics Contact Ratings Contact Arrangement — Contact Operations Type Load Min. 2 Form C (DPDT) 1.0A @ 28VDC Resistive 100,000 Contact Resistance — 200mA @ 28VDC (300mH)* Inductive 100,000 2 Before life — 100 milliohms, max. (measured @ 10 mA @ 6 VDC) 30μA @ 50mVDC Low Level 10,000,000 After life — 200 milliohms, max. * The inductive rating is only applicable to high performance models (MW4HP and MW4HPS). (measured @ 1 A @ 28 VDC) Mechanical Life Expectancy — 10 million operations Coil Voltages — 5, 12, 18 & 26.5 VDC (MW4) 5, 6, 9, 12, 18 & 26.5 VDC (MW4HP) Coil Data Coil Power (mW max. @ 25°C) — MW4 Models MW4 MW4S MW4HP MW4HPS Nominal Coil Resistance Pickup Voltage Nominal Maximum Coil 675 565 673 563 Coil Voltage In Ohms VDC (Max.) Coil Power Coil Desig. (VDC) ±20% @ 25°C @ 25°C (mW) @ 25°C Voltage Duty Cycle — Continuous Standard Coil Pick-up Voltage — 5.0 50 3.6 500 5.8 5 MW4 — Approx 70% of nominal. 12.0 390 8.4 369 16.0 12 MW4HP — Approx 50% of nominal. 18.0 880 13.0 368 24.0 18 Pick-up Sensitivity (mW max. @ 26.5 1,560 17.0 450 32.0 26 25°C) — MW4 MW4S MW4HP MW4HPS Sensitive Coil 180 90 123 68 5.0 100 3.5 250 7.5 5 12.0 850 9.0 169 20.0 12 18.0 1,600 13.5 203 30.0 18 Operating Characteristics 26.5 3,300 18.0 213 40.0 26 Operate Time (ms max.) — MW4HP (High Performance) Models MW4 MW4S MW4HP MW4HPS Nominal Coil Res. Pickup V Release V Release V Nominal Maximum 4.0 6.0 2.0 4.0 Coil Coil Voltage in Ohms VDC (Max.) VDC (Max.) VDC (Min.) Coil Power Coil Desig. Release Time (ms max.) (VDC) ±10% @ 25°C @25°C @25°C @25°C (mW) @25°C Voltage MW4 MW4S MW4HP MW4HPS Standard Coil 3.0 3.0 1.5 2.0 5.0 50 2.7 1.4 0.22 500 5.8 5 Bounce Time (ms max.) 6.0 98 3.5 2.0 0.28 367 8.0 6 MW4 MW4S MW4HP MW4HPS 9.0 220 5.3 3.0 0.54 368 12.0 9 —— 1.5 1.5 12.0 390 7.0 4.0 0.63 369 16.0 12 Dielectric Withstanding Voltage — 18.0 880 10.5 6.0 0.91 368 24.0 18 Between Open Contacts, 26.5 1,560 14.2 8.0 1.37 450 32.0 26 Between Adjacent Contacts and Between Sensitive Coil Contacts and Coil — 5.0 100 2.6 1.4 0.23 250 7.5 5 MW4 types — 350 Vrms, 60 Hz. 6.0 200 3.4 2.0 0.28 180 10.0 6 MW4HP types — 500 Vrms, 60 Hz. 9.0 400 4.85 3.0 0.55 203 15.0 9 Insulation Resistance — 12.0 850 7.0 4.0 0.64 169 20.0 12 1,000 megohms @ 500 VDC 18.0 1,600 9.8 6.0 0.92 203 30.0 18 26.5 3,300 14.0 8.0 1.4 213 40.0 26 Environmental Characteristics Temperature Range — MW4 types — -55°C to +85°C. MW4HP types — -65°C to +125°C. Weight — MW4, MW4HP: 0.09 oz. (2.55 g) MW4S, MW4HPS: 0.12 oz. (3.40 g). Vibration Resistance — MW4 types — 10 G’s, 10-500 Hz. MW4HP types — 30 G’s, 10-3,000 Hz Shock Resistance — MW4 types — 30 G’s, 6 ± 1 ms. MW4HP types — 100 G’s, 6 ± 1 ms. 2–5 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. CII High Frequency, Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) Microwave Switching, Hermetically Sealed, DPDT MW4 & MW4HP Models4 GHz. Switching (Continued) Insertion Loss & VSWR: NO Contacts Insertion Loss & VSWR: NC Contacts Isolation (dB) (dB) (dB) VSWR VSWR 0.0 2.0 0.0 2.0 0 1.9 1.9 0.05 0.05 1.8 1.8 0.10 0.10 -10 INSERTION LOSS 1.7 1.7 0.15 0.15 INSERTION LOSS ISOLATION 1.6 1.6 0.20 0.20 -20 1.5 1.5 0.25 0.25 1.4 1.4 0.30 0.30 -30 1.3 1.3 0.35 0.35 VSWR 1.2 1.2 0.40 0.40 -40 VSWR 1.1 1.1 0.45 0.45 1.0 1.0 0.50 0.50 -50 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.000 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 0.51.01.52.02.53.03.54.0 FREQUENCY (GHz) FREQUENCY (GHz) FREQUENCY (GHz) Test Conditions Test Board — 0.031" double sided Temperature — Room ambient. copper clad, PTFE based laminate. Signal Strength — 0 dBm. Connections — Relay header is sol- Notes: dered to ground place. Relay terminals 1. Unused terminals were terminated are soldered to through holes. SMA con- with 50 ohm impedance load. nectors are soldered to circuit traces. 2. All readings are typical. Enclosures Header .335 (8.51) SQ MAX .375 (9.53) SQ MAX .035± .010 .335 (8.51) SQ MAX .031± .003 (0.79) (0.98) .385 (9.78) MAX .280 (7.11) MAX .200 DIA TERMINAL + 36° 3° (5.08) P = .187±.010 (4.75±.25) A = .750 MIN (19.05) B = 1.50 MIN (38.10) Header and Terminal Finish: Gold plated +.002 +.002 .017 (0.43) DIA .017 (0.43) DIA -.001 -.001 .370 (9.40) SQ MAX .370 (9.40) SQ MAX MW4S / MW4HPS MW4 / MW4HP Part Numbering System Wiring Diagram Typical Part Number MW4 S – 5 P Series: MW4 = 4 GHz. switching relay MW4HP = High performance 4 GHz. switching relay Coil Sensitivity: Leave Blank = Standard Coil S = Sensitive Coil Coil Designator: 5 = 5VDC 6 = 6VDC† 9 = 9VDC† 12 = 12VDC 18 = 18VDC 26 = 26.5VDC Terminal View † 6 and 9 volt coil only available on high performance models. Terminal Length: A = 0.750 in (19.05 mm) B = 1.50 in (38.105 mm) – only available on high performance models P = 0.187 ± 0.010 in (4.75 ± 0.25 mm) 2–6 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. CII High Frequency, Low Signal Relays CII High Frequency, Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) Microwave Switching, Hermetically Sealed, DPDT MW6 & MW6HP Models 6 GHz. Switching Electrical Characteristics Contact Ratings Contact Arrangement — Contact Operations Type Load Min. 2 Form C (DPDT) 1.0A @ 28VDC Resistive 100,000 Contact Resistance — 200mA @ 28VDC (300 mH)* Inductive 100,000 2 Before life — 100 milliohms, max. (measured @ 10 mA @ 6 VDC) 30μA @ 50mVDC Low Level 10,000,000 After life — 200 milliohms, max. * The inductive rating is only applicable to high performance models (MW6HP and MW6HPS). (measured @ 1 A @ 28 VDC) Mechanical Life Expectancy — 10 million operations Coil Voltages — 5, 12, 18 & 26.5 VDC (MW6) 5, 6, 9, 12, 18 & 26.5 VDC (MW6HP) Coil Data Coil Power (mW max. @ 25°C) — MW6 Models MW6 MW6S MW6HP MW6HPS Nominal Coil Resistance Pickup Voltage Nominal Maximum Coil 675 565 673 563 Coil Voltage In Ohms VDC (Max.) Coil Power Coil Desig. (VDC) ±20% @ 25°C @ 25°C (mW) @ 25°C Voltage Duty Cycle — Continuous Standard Coil Pick-up Voltage — 5.0 50 3.6 500 5.8 5 MW6 — Approx 70% of nominal. 12.0 390 8.4 369 16.0 12 MW6HP — Approx 50% of nominal. 18.0 880 13.0 368 24.0 18 Pick-up Sensitivity (mW max. @ 26.5 1,560 17.0 450 32.0 26 25°C) — MW6 MW6S MW6HP MW6HPS Sensitive Coil 180 90 123 68 5.0 100 3.5 250 7.5 5 12.0 850 9.0 169 20.0 12 18.0 1,600 13.5 203 30.0 18 Operating Characteristics 26.5 3,300 18.0 213 40.0 26 Operate Time (ms max.) — MW6HP (High Performance) Models MW6 MW6S MW6HP MW6HPS Nominal Coil Res. Pickup V Release V Release V Nominal Maximum 4.0 6.0 2.0 4.0 Coil Coil Voltage in Ohms VDC (Max.) VDC (Max.) VDC (Min.) Coil Power Coil Desig. Release Time (ms max.) (VDC) ±10% @ 25°C @25°C @25°C @25°C (mW) @25°C Voltage MW6 MW6S MW6HP MW6HPS Standard Coil 3.0 3.0 1.5 2.0 5.0 50 2.7 1.4 0.22 500 5.8 5 Bounce Time (ms max.) 6.0 98 3.5 2.0 0.28 367 8.0 6 MW6 MW6S MW6HP MW6HPS 9.0 220 5.3 3.0 0.54 368 12.0 9 —— 1.5 1.5 12.0 390 7.0 4.0 0.63 369 16.0 12 Dielectric Withstanding Voltage — 18.0 880 10.5 6.0 0.91 368 24.0 18 Between Open Contacts, 26.5 1,560 14.2 8.0 1.37 450 32.0 26 Between Adjacent Contacts and Sensitive Coil Between Contacts and Coil — 5.0 100 2.6 1.4 0.23 250 7.5 5 MW6 types — 350 Vrms, 60 Hz. 6.0 200 3.4 2.0 0.28 180 10.0 6 MW6HP types — 500 Vrms, 60 Hz. 9.0 400 4.85 3.0 0.55 203 15.0 9 Insulation Resistance — 12.0 850 7.0 4.0 0.64 169 20.0 12 1,000 megohms @ 500 VDC 18.0 1,600 9.8 6.0 0.92 203 30.0 18 26.5 3,300 14.0 8.0 1.4 213 40.0 26 Environmental Characteristics Temperature Range — MW6 types — -55°C to +85°C. MW6HP types — -65°C to +125°C. Weight — MW6, MW6HP: 0.09 oz. (2.55 g) MW6S, MW6HPS: 0.12 oz. (3.40 g). Vibration Resistance — MW6 types — 10 G’s, 10-500 Hz. MW6HP types — 30 G’s, 10-3,000 Hz Shock Resistance — MW6 types — 30 G’s, 6 ± 1 ms. MW6HP types — 100 G’s, 6 ± 1 ms. 2–7 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. CII High Frequency, Low Signal Relays Double Pole, Electrically Held, 1 Amp and Less (Continued) Microwave Switching, Hermetically Sealed, DPDT MW6 & MW6HP Models 6 GHz. Switching (Continued) Insertion Loss & VSWR: NC Contacts Isolation Insertion Loss & VSWR: NO Contacts (dB) VSWR (dB) VSWR (dB) 2.0 2.0 0.0 0.0 0 1.9 1.9 0.1 0.1 1.8 1.8 0.2 INSERTION LOSS 0.2 -10 INSERTION LOSS 1.7 1.7 0.3 0.3 1.6 1.6 0.4 0.4 -20 ISOLATION 1.5 1.5 0.5 0.5 1.4 1.4 0.6 0.6 -30 1.3 1.3 0.7 0.7 1.2 1.2 0.8 0.8 -40 VSWR VSWR 1.1 1.1 0.9 0.9 1.0 1.0 1.0 1.0 -50 01 0.5 1.0.5 2.02.5 3.03.5 4.04.5 5.05.5 6.0 01 0.5 1.0.5 2.02.5 3.03.5 4.04.5 5.05.5 6.0 01 0.5 1.0.5 2.02.5 3.03.5 4.04.5 5.05.5 6.0 FREQUENCY (GHz) FREQUENCY (GHz) FREQUENCY (GHz) Test Conditions Test Board — 0.031" double sided Temperature — Room ambient. copper clad, PTFE based laminate. Signal Strength — 0 dBm. Connections — Relay header is sol- Notes: dered to ground place. Relay terminals 1. Unused terminals were terminated are soldered to through holes. SMA with 50 ohm impedance load. connectors are soldered to circuit traces. 2. All readings are typical. Enclosures Header .335 (8.51) SQ MAX .375 (9.53) SQ MAX .035± .010 .335 (8.51) SQ MAX .031± .003 (0.79) (0.98) .385 (9.78) MAX 280 (7.11) MAX .200 DIA TERMINAL + 36° 3° (5.08) P = .187±.010 (4.75±.25) A = .750 MIN (19.05) B = 1.50 MIN (38.10) Header and Terminal Finish: +.002 +.002 Gold plated .017 (0.43) DIA .017 (0.43) DIA -.001 -.001 .370 (9.40) SQ MAX .370 (9.40) SQ MAX MW6 / MW6HP MW6S / MW6HPS Part Numbering System Wiring Diagram Typical Part Number MW6 S – 5 P Series: MW6 = 6 GHz. switching relay MW6HP = High performance 6 GHz. switching relay Coil Sensitivity: Leave Blank = Standard Coil S = Sensitive Coil Coil Designator: 5 = 5VDC 6 = 6VDC† 9 = 9VDC† 12 = 12VDC 18 = 18VDC 26 = 26.5VDC Terminal View † 6 and 9 volt coil only available on high performance models. Terminal Length: A = 0.750 in (19.05 mm) B = 1.50 in (38.105 mm) – only available on high performance models P = 0.187 ± 0.010 in (4.75 ± 0.25 mm) 2–8 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products