TE CONNECTIVITY 1721081-9
Specifications
Manufacturer
TE Connectivity
Manufacturers Part #
1721081-9
Lead Time
17 Week Lead Time
Industry Aliases
1721081-9, PCJ-105D3MH,301
Sub-Category
Power Relays
Brand
AMP
Factory Pack Quantity
100
Datasheet

DDEController?Action=srchrtrv&DocNm=PCJ_series_relay_data_sheet_E&DocType=Data+Sheet&DocLang=English&PartCntxt=1721081-9.pdf
1255 KiB
Extracted Text
General Purpose Relays PCB Relays OEG Miniature PCB Relay PCJ n 1pole 3A/5A, 1 form A (NO) contact n Sensitive coil 200mW n Ambient temperature 85°C n RoHS compliant (Directive 2002/95/EC) n WG version : Product in accordance to IEC60335-1 Typical applications F0276-C Home appliances VUC Approvals Coil Data VDE 40009151, UL E58304, CSA LR48471-211, CQC 03001008593 Coil voltage range 3 to 24VDC Technical data of approved types on request Coil insulation system according UL Standard Version: class 105 (A) Contact Data WG version: class 155 (F) Contact arrangement 1 form A (NO) Rated voltage 250VAC Coil versions, DC coil Max. switching voltage 30VDC, 250VAC Coil Rated Operate Release Coil Rated coil Rated current 3A/5A code voltage voltage voltage resistance power Switching power 1,250VA, 150W VDC VDC VDC Ω±10% mW Contact material AgNi 03 3 2.25 0.15 45 200 Min. recommended contact load 100mA, 5VDC 05 4 3.75 0.25 125 200 Initial contact resistance 100mΩ at 1A, 6VDC 06 6 4.50 0.3 180 200 -1 Frequency of operation, with/without load 1800/18000h 09 9 6.75 0.45 405 200 Operate/release time max. 10/4ms 12 12 9.00 0.6 720 200 Electrical endurance 18 18 13.50 0.9 1620 200 3 3A version: 250VAC, resistive, 100x10 ops. 24 24 18.00 1.2 2880 200 3 5A version: 250VAC, resistive, 100x10 ops. All figures are given for coil without pre-energization, at ambient temperature +23°C. Contact ratings Type Contact Load Cycles IEC 61810 3 PCJ form A (NO) 5A,250VAC, cosφ=1, 85°C 100x10 3 PCJ form A (NO) 2A,250VAC, cosφ=0.6 85°C 100x10 3 PCJ form A (NO) 3A,250VAC, cosφ=1, 105°C 100x10 UL 508 3 PCJ form A (NO) 5A,250VAC, general use, 85°C 6x10 3 PCJ form A (NO) 3A,250VAC, cosφ=1, 85°C 100x10 3 PCJ form A (NO) 3A,250VAC, cosφ=1, 105°C 100x10 6 Mechanical endurance >10x10 operations Insulation Data Initial dielectric strength between open contacts 750V rms between contact and coil 4000V rms Initial surge withstand voltage between contact and coil 10000V rms Initial insulation resistance 1000MΩ Clearance/creepage between contact and coil ≥ 7.5/8mm 1 09-2011, Rev. 0911 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions General Purpose Relays PCB Relays OEG Miniature PCB Relay PCJ (Continued) Other Data PCB layout / terminal assignment Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Bottom view on solder pins refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 85°C (105°C) Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight S=511-AA Vibration resistance (functional) 10 to 50Hz, 1.5mm double amplitude Shock resistance (functional) 2 IEC 60068-2-27 (half sine) 98m/s , 11ms Terminal type PCB-THT Weight 4g Resistance to soldering heat THT S0511-AB IEC 60068-2-20 260°C/5s Packaging/unit box/1000 pcs. Dimensions S0512-C Product code structure Typical product code PCJ 1 12 D 3 M 301 Type PCJ Miniature PCB Relay PCJ Version 1 Single contact Coil Coil code: please refer to coil versions table Coil power D Standard 200mW Contact material 3 AgNi Contact arrangement M 1 form A (NO) contact Sealing Blank Flux proof H Wash tight* Suffix 301 Standard version WG Product in accordance with IEC 60335-1 (domestic appliances)* *) Wash tight WG version on request 2 07-2011, Rev. 0911 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions General Purpose Relays PCB Relays OEG Miniature PCB Relay PCJ (Continued) Product code Version Contact Cont. material Coil version Coil Sealing Part number PCJ-103D3M,301 3A 1 form A (NO) AgNi 200mW 3VDC Flux proof 1721081-1 PCJ-105D3M,301 5VDC 1721081-2 PCJ-106D3M,301 6VDC 1721081-3 PCJ-109D3M,301 9VDC 1721081-4 PCJ-112D3M,301 12VDC 1721081-5 PCJ-124D3M,301 24VDC 1721081-7 PCJ-103D3MH,301 3VDC Wash tight 1721081-8 PCJ-105D3MH,301 5VDC 1721081-9 PCJ-106D3MH,301 6VDC 1-1721081-0 PCJ-109D3MH,301 9VDC 1-1721081-1 PCJ-112D3MH,301 12VDC 1-1721081-2 PCJ-124D3MH,301 24VDC 1-1721081-4 PCJ-103D3M-WG 5A 3VDC Flux proof 1721547-1 PCJ-105D3M-WG 5VDC 1721547-2 PCJ-106D3M-WG 6VDC 1721547-3 PCJ-109D3M-WG 9VDC 1721547-4 PCJ-112D3M-WG 12VDC 1721547-5 PCJ-124D3M-WG 24VDC 1721547-7 PCJ-103D3MH-WG 3VDC Wash tight 1721547-8 PCJ-105D3MH-WG 5VDC 1721547-9 PCJ-106D3MH-WG 6VDC 1-1721547-0 PCJ-109D3MH-WG 9VDC 1-1721547-1 PCJ-112D3MH-WG 12VDC 1-1721547-2 PCJ-124D3MH-WG 24VDC 1-1721547-4 3 09-2011, Rev. 0911 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions
Frequently asked questions
How does Electronics Finder differ from its competitors?

Is there a warranty for the 1721081-9?

Which carrier will Electronics Finder use to ship my parts?

Can I buy parts from Electronics Finder if I am outside the USA?

Which payment methods does Electronics Finder accept?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods