LightCrimp Plus Optical Fiber Connectors & Accessories System Overview AMP NETCONNECT Key Features Optical Fiber Terminations In Less Than a Minute • Quick and easy fiber termination process With AMP NETCONNECT LightCrimp Plus optical fiber connectors from • Terminations take under a minute CommScope you can terminate optical fibers for premises cabling and • Easy termination procedure fiber-to-the-desk applications in less than a minute. • No polishing needed: simply strip and cleave the fiber, then crimp the connector AMP NETCONNECT LightCrimp Plus optical fiber connectors use CommScope’s crimp technology • Factory-polished to a consistent, high-quality to make fiber optic terminations a quick, clean and simple mechanical process. Only a few tools, end finish - ensures reliable physical contact and in most circumstances, little training are required. With LightCrimp Plus optical fiber products, you and eliminates return loss concerns can terminate fibers without epoxy, polishing papers, ovens, UV lamps, or electrical power for field termination tooling. • No need for epoxy, curing ovens or electricity Convenient side latches allow you to remove module covers without removing the base from the mounting surface. This speeds MACs (Moves, Adds and Changes) without needing to unplug existing, • LC, SC and ST-Style connectors active connections. For facilities requiring additional security in work areas and classroom environments, • No set-up required, ideal for low fiber the cover can be screwed shut to prevent unauthorized access. Pre-scored knockouts allow compatibility count installs with most surface mount raceway systems as well as modular furniture raceways. • No workstation required • Lowest applied labor costs • Exceeds connectors performance requirements of ANSI/TIA-568-C.3 • Same tool kit for single-mode and multimode terminations 1 For more information, visit commscope.com LightCrimp Plus Optical Fiber Connectors and Accessories Surface Mount Modules and Accessories G E B C A D F Key Features • No epoxy, no polish, no curing • Ceramic ferrules • Little or no setup or tear-down time • Three step termination: Strip, cleave, crimp • Compliant with ANSI/TIA-568-C.3 • LC and SC Duplex clips join two simplex connectors creating one duplex connector • Easiest and quickest fiber termination available • Factory polished for high consistency Connector Type Fiber Type Housing Color Boot Color For Use With Figure Part Numbers 900 µm buffered and 250 µm coated fibers A 6754482-1 Single-mode, UPC Blue Blue 1.6 to 2.0 mm Jacketed Cable 1918626-1 Single-mode, APC Green Blue 900 µm buffered and 250 µm coated fibers B 2064181-1 900 µm buffered and 250 µm coated fibers 6754483-4 XG Multimode, 50 µm Beige Aqua LC Simplex 1.6 to 2.0 mm Jacketed Cable 1918627-3 900 µm buffered and 250 µm coated fibers 6754483-2 Multimode, 50 µm Beige Black 1.6 to 2.0 mm Jacketed Cable 1918627-2 900 µm buffered and 250 µm coated fibers C 6754483-1 Multimode, 62.5 µm Beige Beige 1.6 to 2.0 mm Jacketed Cable 1918627-1 Single-mode, UPC Blue Blue 900 µm buffered and 250 µm coated fibers 6754484-1 XG Multimode, 50 µm Beige Aqua 900 µm buffered and 250 µm coated fibers 6754485-4 LC Duplex Multimode, 50 µm Beige Black 900 µm buffered and 250 µm coated fibers 6754485-2 Multimode, 62.5 µm Beige Beige 900 µm buffered and 250 µm coated fibers 6754485-1 Black Simplex LightCrimp Plus LC Connectors (6 clips per pack) D 1754371-1 Duplex Clip, LC Blue Simplex LightCrimp Plus LC Connectors (6 clips per pack) 1754371-4 Beige Simplex LightCrimp Plus LC Connectors (6 clips per pack) 1754371-5 Single-mode, UPC Blue Blue 900 µm buffered fibers, 250 µm coated fibers, and 3mm Jacketed Cable E 6693276-1 Single-mode, APC Green Blue 900 µm buffered and 250 µm coated fibers 2064184-1 SC Simplex XG Multimode, 50 µm Beige Aqua 900 µm buffered fibers, 250 µm coated fibers, and 3mm Jacketed Cable 6588291-2 Multimode, 50 µm Beige Black 900 µm buffered fibers, 250 µm coated fibers, and 3mm Jacketed Cable 6278079-2 Multimode, 62.5 µm Beige Beige 900 µm buffered fibers, 250 µm coated fibers, and 3mm Jacketed Cable 5492643-1 Single-mode, UPC Blue Blue 900 µm buffered fibers, 250 µm coated fibers, and 3mm Jacketed Cable 6693278-1 XG Multimode, 50 µm Beige Aqua 900 µm buffered fibers, 250 µm coated fibers, and 3mm Jacketed Cable 6588292-2 SC Duplex Multimode, 50 µm Beige Black 900 µm buffered fibers, 250 µm coated fibers, and 3mm Jacketed Cable 6278080-2 Multimode, 62.5 µm Beige Beige 900 µm buffered fibers, 250 µm coated fibers, and 3mm Jacketed Cable 6278009-1 Black Simplex LightCrimp Plus SC Connectors (1 set per pack) F 6348522-1 Green Simplex LightCrimp Plus SC Connectors (1 set per pack) 6348522-2 Duplex Clip, SC Blue Simplex LightCrimp Plus SC Connectors (1 set per pack) 6348522-3 Beige Simplex LightCrimp Plus SC Connectors (1 set per pack) 6348522-4 Single-mode, UPC Metallic Black 900 µm buffered fibers, 250 µm coated fibers, and 3mm Jacketed Cable 1828953-3 XG Multimode, 50 µm Metallic Aqua 900 µm buffered fibers, 250 µm coated fibers, and 3mm Jacketed Cable 6278082-2 ST Multimode, 50 µm Metallic Black 900 µm buffered fibers, 250 µm coated fibers, and 3mm Jacketed Cable G 6278082-1 Multimode, 62.5 µm Metallic Beige 900 µm buffered fibers, 250 µm coated fibers, and 3mm Jacketed Cable 5492642-2 2 For more information, visit commscope.com LightCrimp Plus Optical Fiber Connectors and Accessories LightCrimp Plus Termination Tool Kits and Accessories Terminates: Description LightCrimp Plus LightCrimp Part Numbers ALL MT-RJ LC SC ST SC ST Universal No-epoxy/No-polish Termination Kit X X X X 1278118-4 LightCrimp Plus LC/SC Connector Termination Kit X X 1754845-1 LightCrimp Plus ST Connector Termination Kit X 492697-1 Deluxe Premise Termination Kit X X X X X X 1278949-2 LightCrimp Plus Combination Adaptive Termination Kit X X X 1754739-2 LightCrimp Plus LC/SC Adaptive Termination Kit X X 1754846-1 LightCrimp Plus ST Adaptive Termination Kit X 1754738-1 Adds functionality to terminate LightCrimp Plus LC LC Connector Upgrade Termination Kit 1754847-2 Connectors To Other Adaptive Tool Kits Key Features • Adaptive tool kits are a cost-effective, upgradable solution, if common fiber and cable preparation tools are already available. • Termination tool kits come with a high quality, soft carrying case and are equipped with all the necessary tools required to terminate the listed, field installable connectors. • All kits come with LightCrimp Plus connector termination instructions and instructional CD-ROM. The CD-ROM is also available separately by requesting part number 1374503-1. Please contact your local sales engineer to request your copy, or call our customer service department at 800-553-0938. Deluxe Premise Termination Tool Kit 3 For more information, visit commscope.com LightCrimp Plus Optical Fiber Connectors and Accessories Kit Contents and Quantities Pre-polished Connectors Since AMP NETCONNECT LightCrimp Plus connectors are factory polished, all you have to Description Part Number do is strip cable, prepare and cleave the fiber, Premium, soft shell, carrying case 1278540-1 1 1 1 1 1 1 1 and crimp the connector. There is no setup time Strip tool, fiber combination 1754708-1 1 1 1 1 – – – – required and you get a more consistent, high KEVLAR shears 1278637-1 1 1 1 1 – – – – quality end-face finish. When compared to Wrench, ¼ inch, open end 1278422-1 2 2 2 2 2 2 2 2 epoxy/hand polished connectors. PRO-CRIMPER III Hand Tool 2064431-1 – 1 – – 1 1 1 – PRO-CRIMPER III Hand Tool with die set for LightCrimp 2064603-1 1 – – – – – – – LightCrimp Plus Connectors Plus LC and SC Connectors PROCRIMPER III Hand Tool with die set for LightCrimp 492623-1 – – 1 – – – – – Are Rugged Plus ST Connectors PROCRIMPER III Hand Tool with die set for LightCrimp LightCrimp Plus connectors offer consistent 492782-1 – – – 1 – – – – and LightCrimp Plus SC Connectors polish, crimp quality, and long term LightCrimp Plus LC die set for PROCRIMPER III Hand Tool 1754136-1 – – – 1 – – – 1 performance that’s on par with standard epoxy LightCrimp Plus ST die set for PROCRIMPER III Hand Tool 492622-1 1 – – 1 1 – 1 – style connectors. LightCrimp Plus LC and SC die set for PROCRIMPER III 1985766-1 – 1 – – 1 1 – – Hand Tool LightCrimp Plus connectors meet or exceed LightCrimp Plus SC die set for PROCRIMPER III Hand Tool 492783-1 – – – – 1 – – – the relevant ANSI/TIA, IEC, and EN optical LightCrimp Plus LC and SC cable/buffer holder 2064540-1 1 1 – – 1 1 – – – and mechanical specifications and operate in LightCrimp Plus LC cable/buffer holder 1754138-1 – – – 1 – – 1 LightCrimp Plus SC cable/buffer holder 1278023-1 – – – 1 1 – – – temperatures ranging from -10˚ to +60˚ C. LightCrimp Plus ST cable/buffer holder 492703-1 1 – 1 1 1 – 1 – Alcohol fiber wipe 501857-2 14 14 14 14 – – – – Tool Kit Upgrades OPTIMATE cable stripper 501198-1 1 – – – – – – – Micro-stripper, MT-RJ 492109-2 1 1 – 1 – – – – The tooling used to crimp LightCrimp Plus Actuation key, MT-RJ 1278576-1 2 – – 2 – – – – connectors can also be used with LightCrimp Strip Template, MT-RJ 1278598-1 1 – – 1 – – – – connectors. For existing users of LightCrimp or Label, termination kit 1374331-1 1 – – – – – – – other, pre-polished connectors, CommScope CD-ROM, termination training 1374503-1 1 1 1 1 1 1 1 – offers upgrade tool kits to make the transition Fiber Optics Cleaning and Inspection Guide 2064710-1 1 1 1 1 1 1 1 – to LightCrimp Plus connectors easier and more Ball end hex key (5) 1457999-1 1 – – 1 – – – – cost effective. Fiber cleaver, slide cutter 1871696-1 1 1 1 1 1 1 1 – Cable Slitter, 2 mm 2064453-2 1 1 – – – 1 – – Cable Clamp 1278625-1 1 1 – 1 – 1 – 1 Performance Characteristics 200x Microscope Kit 1754767-1 – – – – – – – – LightCrimp Plus connectors have been tested 200x Microscope Adapter, MT-RJ 1754768-1 – – – – – – – – 200x Microscope Adapter, 1.25 mm 1754765-1 – – – – – – – – per industry FOTPs (Fiber Optic Test Procedures) LightCrimp Cleave Tool 503705-1 – – – 1 – – – – and meet or exceed all requirements in the LightCrimp ST Strip Template 503574-1 – – – 1 – – – – Connector Performance Specification Annex of LightCrimp SC Strip Template 503694-1 – – – 1 – – – – ANSI/TIA-568-C. Polishing Plate, 8.5 x 11 inches 501197-1 – – – 1 – – – – Polishing Pad, Rectangular 504584-1 – – – 1 – – – – LightCrimp Plus connectors utilize ceramic Polishing Pad, Circular 501523-1 – – – 1 – – – – ferrules and yield terminations with typical Polishing Film, 0.3 µm 228433-5 – – – 10 – – – – Insertion Loss of 0.2 dB for single-mode, and Polishing Film, 0.5 µm 228433-8 – – – 10 – – – – 0.3 dB for multimode. LightCrimp ST Polishing Bushing, Black 503304-1 – – – 1 – – – – LightCrimp ST Polishing Bushing, Beige 503304-2 – – – 1 – – – – LightCrimp SC Polishing Bushing 502631-1 – – – 5 – – – – Scissors 501014-1 – – – 1 – – – 1 www.commscope.com Visit our website or contact your local CommScope representative for more information. © 2015 CommScope, Inc. All rights reserved. LightCrimp Plus, AMP NETCONNECT, PRO-CRIMPER, OPTIMATE and all trademarks identified by ® or ™ are registered trademarks or trademarks, respectively, of CommScope, Inc. This document is for planning purposes only and is not intended to modify or supplement any specifications or warranties relating to CommScope products or services. PS-313912-AE (12/15) 1278118-4 1754845-1 492697-1 1278949-2 1754739-2 1754846-1 1754738-1 1754847-2