General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT2 n 2 pole 8A, 2 form C (CO) or 2 form A (NO) contacts n Sensitive coil 400mW n 5kV/10mm coil-contact, reinforced insulation n Ambient temperature 85°C Typical applications Boiler control, timers, garage door control, POS automation, interface modules VZb Approvals Coil Data VDE REG.-Nr. 6106, UL E214025, cCSAus 14385 Coil voltage range 5 to 110VDC Technical data of approved types on request Operative range, IEC 61810 2 Coil insulation system according UL class F Contact Data Contact arrangement 2 form C (CO) or 2 form A (NO) Coil versions, DC coil Rated voltage 250VAC Coil Rated Operate Release Coil Rated coil Max. switching voltage 400VAC code voltage voltage voltage resistance power Rated current 8A, UL: 10A VDC VDC VDC Ω±10% mW Limiting continuous current 8A, UL: 10A 005 5 3.5 0.5 62 403 Limiting making current, max. 4s, duty factor 10% 15A 006 6 4.2 0.6 90 400 Breaking capacity max. 2000VA 009 9 6.3 0.9 200 400 Contact material AgNi 90/10 012 12 8.4 1.2 360 400 -1 Frequency of operation, with/without load 360/72000h 024 24 16.8 2.4 1440 400 Operate/release time max., DC coil 8/6ms 048 48 33.6 4.8 5520 417 All figures are given for coil without pre-energization, at ambient temperature +23°C. Bounce time max., DC coil, form A/form B 4/10ms Other coil voltages on request. Contact ratings Type Contact Load Cycles IEC 61810 3 RT424 DC coil C (CO) 8A, 250VAC, cosφ=1, 85°C 10x10 3 RT444 AC coil A (NO) 8A, 250VAC, cosφ=1, 70°C 50x10 3 RT424 AC coil C (CO) 8A, 250VAC, cosφ=1, 70°C 30x10 UL 508 3 RT424 DC coil A/B (NO/NC) 10A, 250VAC, gen. purpose, 85°C 20x10 3 RT424 DC coil A/B (NO/NC) 1/2hp, 240VAC, 85°C 1x10 3 RT424 DC coil A/B (NO/NC) Pilot duty, B300, R300, 85°C 6x10 EN60947-5-1 RTE24 DC coil A/B (NO/NC) AC15, 250VAC, 3A 6.050 RTE24 DC coil A/B (NO/NC) DC13, 24VDC, 2A 6.050 RTE24 DC coil A/B (NO/NC) DC13, 250VDC, 0.2A 6.050 EN60730-1 3 RT424 DC coil A/B (NO/NC) 6(2)A, 250VAC, 85°C 100x10 Insulation Data 6 Mechanical endurance >30x10 operations Initial dielectric strength between open contacts 1000V rms between contact and coil 5000V rms between adjacent contacts 2500V rms Clearance/creepage between contact and coil ≥10/10mm between adjacent contacts ≥ 3/4mm Material group of insulation parts IIIa Tracking index of relay base PTI 250V 1 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT2 (Continued) Other Data Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content refer to the Product Compliance Support Center at www.te.com/customersupport/rohssupportcenter Ambient temperature -40 to 85°C Category of environmental protection IEC 61810 RTII - flux proof, RTIII - wash tight Vibration resistance (functional), form A/form B contact, 30 to 300Hz 20g/5g Shock resistance (destructive) 100g Terminal type PCB-THT, plug-in Weight 13g Resistance to soldering heat THT, IEC 60068-2-20 RTII 270°C/10s RTIII 260°C/5s Packaging/unit tube/20pcs., box/500pcs. Accessories For details see datasheet Accessories Industrial Power Relay RT NOTE: indicated contact ratings and electrical endurance data for direct wiring of relays (according IEC 61810-1); for relays mounted on sockets deratings may apply. Dimensions PCB layout / terminal assignment Bottom view on solder pins S0418-CA S0272-BA *) With the recommended PCB hole sizes a grid pattern from 2.5 mm to 2.54 mm can be used. 2 form C (CO) contacts S0163-BJ 2 form A (NO) contacts S0163-BK 2 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions General Purpose Relays PCB Relays Potter & Brumfield Power PCB Relay RT2 (Continued) Product code structure Typical product code RT 4 2 4 024 F Type RT Power PCB Relay RT2 Version 4 8A, pinning 5mm, flux proof E 8A, pinning 5mm, wash tight Contact arrangement 2 2 form C (CO) contacts 4 2 form A (NO) contacts Contact material 4 AgNi 90/10 Coil Coil code: please refer to coil versions table Version F Standard version Product code Version Contacts Contact material Coil Part number RT424005F 8A, 2 form C (CO) AgNi 90/10 5VDC 1-1419108-6 RT424012F pinning 5mm, contacts 12VDC 2-1393237-8 RT424024F flux proof 24VDC 1-1419108-7 RT444012F 2 form A (NO) 12VDC 1-1419108-9 RT444024F contacts 24VDC 2-1419108-0 RTE24005F 8A, 2 form C (CO) 5VDC 4-1419108-0 RTE24006F pinning 5mm, contacts 6VDC 6-1393227-5 RTE24009F wash tight 9VDC 3-1393237-0 RTE24012F 12VDC 3-1393237-1 RTE24024F 24VDC 3-1393237-3 RTE24048F 48VDC 3-1393237-4 RTE44012F 2 form A (NO) 12VDC 4-1419108-2 RTE44024F contacts 24VDC 3-1393237-5 This list represents the most common types and does not show all variants covered by this datasheet. Other types on request 3 04-2011, Rev. 0411 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions