RF Signal Relays AXICOM HF3 S Relay n Y-Design n Frequency range DC to 3GHz n Impedance 50Ω / 75Ω n Small dimensions (15x7.6x10.6mm) Telecom-, Signal and RF Relays Sep. 07 n 1 form C contact (1 changeover contact) n Immersion cleanable HF3 S Relay n Low power consumption (≤140mW) Terminal assignment Typical applications Relay top view Cable modems and linecards/ CATV, Tabs, measurement and test equipment ATE, satellite / audio / video tuners, wireless base stations and Non-latching type, Latching type, 1 coil Latching type, 2 coils antennas, power stages not energized condition rest condition reset condition Telecom-, Signal and RF Relays Sep. 07 Contact Data Coil Data (continued) Telecom-, Signal and RF Relays Sep. 07 Contact arrangement 1 form C, 1 CO HF3 S Relay Max. switching voltage 220VDC, 250VAC Coil versions, bistable HF3 S Relay Rated current 2A Coil Rated Set Limiting Reset Coil Rated coil Limiting continuous current, 23°C 2A code voltage voltage voltage voltage resistance power Terminal assignment Switching power 60W, 62.5VA, VDC VDC VDC VDC Ω±10% mW Terminal assignment 50W (2.5GHz) 50Ω version, bistable, 1 coil Relay top view Max. Continuos RF-Power, 73S 5 3.75 15.30 -3.75 357 70 Relay top view 1) at 20°C., VSWR <1.2 100W @ 3GHz 50Ω version, bistable, 2 coils 1) 150W @ 2GHz 91S 3 2.25 6.50 2.25 64 140 Non-latching type, Latching type, 1 coil Latching type, 2 coils 1) Breaking capacity max. 300W 92S 4.5 3.38 9.80 3.38 145 140 Non-latching type, Latching type, 1 coil Latching type, 2 coils not energized condition rest condition reset condition Contact material Ag, Au covered 93S 5 3.75 10.90 3.75 178 140 not energized condition rest condition reset condition Minimum switching voltage 100µV 95S 9 6.75 19.60 6.75 574 140 Initial contact resistance <100mΩ at 10mA/30mV 96S 12 9.00 26.10 9.00 1028 140 Operate time typ. 3ms, max. 5ms 75Ω version, bistable, 2 coils Release time 41S 3 2.25 6.50 2.25 64 140 without diode in parallel typ. 2ms, max. 5ms 42S 4.5 3.38 9.80 3.38 145 140 with diode in parallel typ. 4ms, max. 6ms 43S 5 3.75 10.90 3.75 178 140 Bounce time max. typ. 1ms, max. 3ms 46S Coil Ope 12 ra9.00 ting Range 26.10 9.00 1028 140 Duration of set/reset pulse min. 20ms All figures are given for coil without pre-energization, at ambient temperature +23°C. 7 Mechanical endurance 10 operations 140 mW 70 mW 1) with appropriat cooling only Coil operating Range 3.5 140 mW Coil Data 70 mW Coil voltage range 3 to 24VDC 3 Umax. at 0 A Umax. at 0 A Coil versions, monostable 2.5 Coil Rated Operate Limiting Release Coil Rated coil 2 code voltage voltage voltage voltage resistance power VDC VDC VDC VDC Ω±10% mW 1.5 50Ω version, monostable, 1 coil U nom. nominal coil voltage U nom. nominal coil voltage 51S 3 2.25 6.50 0.30 64 140 1 52S 4.5 3.38 9.80 0.45 145 140 Uop. min. Coil Operating Range 0.5 53S 5 3.75 10.90 0.50 178 140 Uop. min. Coil Operating Range Urel. min. 55S 9 6.75 19.60 0.90 574 140 0 -55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135 56S 12 9.00 26.10 1.20 1028 140 140 mW 70 mW 140 mW 70 mW Ambient Temperature [°C] 57S 24 18.00 52.30 2.40 4114 140 Ambient Temperature [°C] 75Ω version, monostable, 1 coil 3.5 140 mW 01S 3 2.25 6.50 0.30 64 140 3.5 140 mW 70 mW U = Nominal coil voltage 70 mW 02S 4.5 3.38 9.80 0.45 145 140 nom 3 Umax. at 0 A 3 U = Upper limit of the operative range of 03S 5 3.75 10.90 0.50 178 Umax. at 0 A 140 max. Umax. at 0 A 05S 9 6.75 19.60 0.90 574 140 2.5 the coil voltage (limiting voltage) Umax. at 0 A 2.5 06S 12 9.00 26.10 1.20 1028 140 U = Lower limit of the operative range of op. min. 2 All figures are given for coil without pre-energization, at ambient temperature +23°C. 2 the coil voltage (reliable operate voltage) For latching relays U resp U min. set min. . reset 1.5 1.5 U nom. nominal coil voltage U = Lower limit of the operative range of rel. min. U nom. nominal coil voltage 1 U nom. nominal coil voltage the coil voltage (reliable release voltage) 1 U nom. nominal coil voltage Uop. min. Uop. min. 0.5 0.5 Uop. min. Urel. min. Uop. min. Urel. min. 0 0 -55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135 -55-45 -35-25 -15-55 15 25 35 45 55 65 75 85 95 105115 125135 Ambient Temperature [°C] Ambient Temperature [°C] Ambient Temperature [°C] Ambient Temperature [°C] All specifications subject to change. Consult Tyco Electronics for latest specifications. 1 5 of 12 03-2017, Rev. 0317 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- U = Nominal coil voltage nom U = Nominal coil voltage nom www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications U = Upper limit of the operative range of max. U = Upper limit of the operative range of © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. max. the coil voltage (limiting voltage) a TE Connectivity Ltd. company http://relays.te.com/definitions the coil voltage (limiting voltage) U = Lower limit of the operative range of op. min. U = Lower limit of the operative range of op. min. the coil voltage (reliable operate voltage) the coil voltage (reliable operate voltage) For latching relays U resp U min. set min. . reset For latching relays U resp U min. set min. . reset U = Lower limit of the operative range of rel. min. U = Lower limit of the operative range of rel. min. the coil voltage (reliable release voltage) the coil voltage (reliable release voltage) All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 12 All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 12 Coil Voltage [U/U nom ] Coil Voltage [U/U nom ] Coil Voltage [U/U nom ] Coil Voltage [U/U nom ] Coil Voltage [U/U nom ] Coil Voltage [U/U nom ] AXICOM AXICOM RF Signal Relays AXICOM Telecom-, Signal and RF Relays Telecom-, Signal and RF Relays 108-98021 Rev. 108-98021 Rev. D D AXICOM AXICOM HF3 S Relay (Continued) HF3 S Rela HF3 S Rela y y Telecom-, Signal and RF Relays Telecom-, Signal and RF Relays 108-98021 Rev. 108-98021 Rev. D D AXICOM AXICOM HF3 S Rela HF3 S Rela y y Insulation Data 50Ω version 75Ω version Other Data High Fr High Fr equency Data equency Data Initial dielectric strength Telecom-, Signal and RF Relays Telecom-, Signal and RF Relays Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content 108-98021 Rev. 108-98021 Rev. D D between open contacts 600V refer to the Product Compliance Support Center at rms between contact and coil 1000V www.te.com/customersupport/rohssupportcenter rms HF3 S Rela HF3 S Rela y y RF characteristics Initial surge withstand voltage RF characteristics 50 Ambient temperatur Ω 50 Ω e 75 Ω 75 Ω -55°C to +85°C High Fr High Fr equency Data equency Data between open contacts 1000V Thermal resistance <165K/W Isolation at 100 MHz / 900 MHz / 3 GHz Isolation at 100 MHz / 900 MHz / 3 GHz -95dB / -80dB / -55dB -95dB / -80dB / -55dB -96dB / -80dB / -50dB -96dB / -80dB / -50dB between contact and coil 1500V Category of environmental protection Insertion loss at 100 MHz / 900 MHz / 3 GHz Insertion loss at 100 MHz / 900 MHz / 3 GHz -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB IEC 61810 RT III - wash tight RF characteristics RF characteristics 50 Ω 50 Ω 75 Ω 75 Ω High Fr V High Fr V .S.W equency Data .S.W .R. at 100 MHz / 900 MHz / 3 GHz equency Data .R. at 100 MHz / 900 MHz / 3 GHz 1.05 / 1.10 / 1.25 V 1.05 / 1.10 / 1.25 ibration resistance (functional) 1.05 / 1.20 / 1.30 1.05 / 1.20 / 1.30 35g, 10 to 1000Hz RF Data Shock resistance (functional), half sinus 11ms 50g Isolation at 100 MHz / 900 MHz / 3 GHz Isolation at 100 MHz / 900 MHz / 3 GHz -95dB / -80dB / -55dB -95dB / -80dB / -55dB -96dB / -80dB / -50dB -96dB / -80dB / -50dB Isolation Shock resistance (destructive), half sinus 0.5ms 150g Insertion loss at 100 MHz / 900 MHz / 3 GHz Insertion loss at 100 MHz / 900 MHz / 3 GHz -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB at 100MHz/900MHz 95dB/80dB 96dB/80dB Terminal type SMT RF characteristics RF characteristics 50 Ω 50 Ω 75 Ω 75 Ω V V .S.W .S.W .R. at 100 MHz / 900 MHz / 3 GHz .R. at 100 MHz / 900 MHz / 3 GHz 1.05 / 1.10 / 1.25 1.05 / 1.10 / 1.25 1.05 / 1.20 / 1.30 1.05 / 1.20 / 1.30 at 3GHz 55dB 50dB Weight max. 3g 50 50  Isolation at 100 MHz / 900 MHz / 3 GHz Isolation at 100 MHz / 900 MHz / 3 GHz -95dB / -80dB / -55dB 75 -95dB / -80dB / -55dB 75   -96dB / -80dB / -50dB -96dB / -80dB / -50dB Insertion loss Resistance to soldering heat SMT Peak Value at 100MHz/900MHz 0.03dB/0.12dB 0.03dB/0.12dB IEC 60068-2-58 250°C/10s Insertion loss at 100 MHz / 900 MHz / 3 GHz Insertion loss at 100 MHz / 900 MHz / 3 GHz -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB -0.03dB / -0.12dB / -0.30dB at 3GHz 0.30dB 0.30dB Moisture sensitive level, JEDEC J-Std-020D MSL3 V V .S.W .S.W .R. at 100 MHz / 900 MHz / 3 GHz .R. at 100 MHz / 900 MHz / 3 GHz 1.05 / 1.10 / 1.25 1.05 / 1.10 / 1.25 1.05 / 1.20 / 1.30 1.05 / 1.20 / 1.30 Voltage standing wave ratio (VSWR) Ultrasonic cleaning not recommended 50 50   75 75   0 0 at 100MHz/900MHz/3GHz 1.05/1.10/1.25 1.05/1.20/1.30 Packaging/unit, SMT reel/400 pcs., box/400 pcs. or 2000 pcs. 0 0 NO NO NO NO NC NC NC NC -20 -20 -20 -20 50 50   75  75  0 0 0 0 -40 -40 -40 -40 NO NO NO NO RF performance, 50Ω version RF performance, 75Ω version NC NC NC NC -20 -20 -20 -20 -60 -60 -60 -60 0 0 0 0 -40 -40 -40 -40 -80 -80 -80 -80 NO NO NO NO NC NC NC NC -20 -20 -20 -20 -60 -60 -100 -100 -60 -60 -100 -100 -40 -40 -40 -40 -80 -80 -120 -120 -80 -80 -120 -120 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 05 05 00 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 Frequency [MHz Frequency [MHz ] ] -60 -60 -60 -60 Frequency [MHz] Frequency [MHz] -100 -100 -100 -100 -80 -80 -120 -120 -80 -80 -120 -120 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 05 05 00 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 Frequency [MHz Frequency [MHz ] ] -100 -100 Frequency [MHz] Frequency [MHz] -100 -100 -120 -120 0.00 0.00 0.00 0.00 -120 -120 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 NO NO 05 05 00 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 NO NO NC NC Frequency [MHz Frequency [MHz ] ] NC NC Frequency [MHz] Frequency [MHz] -0.10 -0.10 -0.10 -0.10 0.00 0.00 0.00 0.00 NO NO NO NO NC NC NC NC -0.20 -0.20 -0.20 -0.20 -0.10 -0.10 -0.10 -0.10 0.00 0.00 0.00 0.00 NO NO NO NO NC NC -0.30 -0.30 NC NC -0.30 -0.30 -0.20 -0.20 -0.20 -0.20 -0.10 -0.10 -0.10 -0.10 -0.40 -0.40 -0.40 -0.40 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 -0.30 -0.30 05 05 00 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 -0.30 -0.30 -0.20 -0.20 Frequency [MHz Frequency [MHz ] ] -0.20 -0.20 Frequency [MHz] Frequency [MHz] -0.40 -0.40 -0.40 -0.40 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 -0.30 -0.30 -0.30 -0.30 05 05 00 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 Frequency [MHz Frequency [MHz ] ] Frequency [MHz] Frequency [MHz] -0.40 -0.40 1.40 1.40 1.40 1.40 -0.40 -0.40 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 NO NO 05 05 00 00 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 NO NO NC NC Frequency [MHz Frequency [MHz ] ] NO NO NC NC Frequency [MHz] Frequency [MHz] NC NC 1.30 1.30 1.30 1.30 1.40 1.40 1.40 1.40 NO NO NO NO NC NC NO NO NC NC NC NC 1.20 1.20 1.20 1.20 1.30 1.30 1.30 1.30 1.40 1.40 1.40 1.40 NO NO NO NO NC NC NO NO 1.10 1.10 NC NC 1.10 1.10 NC NC 1.20 1.20 1.20 1.20 1.30 1.30 1.30 1.30 1.00 1.00 1.00 1.00 05 05 00 00 1000 1000 1500 1500 2000 2000 2500 2500 1.10 1.10 1.10 0 1.10 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 Frequency [MHz Frequency [MHz ] ] 1.20 1.20 1.20 1.20 Frequency [MHz Frequency [MHz ] ] 1.00 1.00 2 1.00 1.00 1.10 05 1.10 05 00 00 1000 1000 1500 1500 2000 2000 2500 2500 1.1003-2017, 1.10 Rev. 0317 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 Frequency [MHz Frequency [MHz ] ] Frequency [MHz Frequency [MHz ] ] www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. 1.00 1.00 a TE Connectivity Ltd. company http://relays.te.com/definitions 1.00 1.00 05 05 00 00 1000 1000 1500 1500 2000 2000 2500 2500 0 0 500 500 1000 1000 1500 1500 2000 2000 2500 2500 3000 3000 Frequency [MHz Frequency [MHz ] ] Frequency [MHz Frequency [MHz ] ] All specifications subject to change. Consult All specifications subject to change. Consult Tyco Electronics for latest specifications. Tyco Electronics for latest specifications. 8 of 12 8 of 12 All specifications subject to change. Consult All specifications subject to change. Consult Tyco Electronics for latest specifications. Tyco Electronics for latest specifications. 8 of 12 8 of 12 All specifications subject to change. Consult All specifications subject to change. Consult Tyco Electronics for latest specifications. Tyco Electronics for latest specifications. 8 of 12 8 of 12 Insertion-loss [dB] Insertion-loss [dB] Isolation [dB] Insertion-loss [dB] Isolation [dB] Isolation [dB] Insertion-loss [dB] Insertion-loss [dB]Insertion-loss [dB] Isolation [dB] Isolation [dB] Isolation [dB] 3 4° 4° 3 RF Signal Relays AXICOM HF3 S Relay (Continued) Terminal assignment TOP view on component side of PCB set Monostable Bistable, 1 coil Bistable, 2 coils + - reset - + 22 21 20 19 18 17 16 15 14 13 12 Contacts are shown in 1 2 3 4 5 6 7 8 9 10 11 reset condition. Contact position reset might change during + - transportation and must be reset before use. set - + PCB layout HF3-PIN-1SPULE_CONFIG HF3-PIN-1SPULE_CONFIG TOP view on component side of PCB HF3-PIN-2SPULEN 50Ω version 75Ω version THIS DRAWING IS A CONTROLLED DOCUMENT. THIS DRAWING IS A CONTROLLED DOCUMENT. LOC DIST REVISIONS LOC DIST REVISIONS P LTR DESCRIPTION DATE DWN APVD P LTR DESCRIPTION DATE DWN APVD Dimensions HJ - HJ - 15JAN2010 E New Coplanarity, Solder Pad Layout UKo HD New Coplanarity, Solder Pad Layout 15JAN2010 UKo HD E Printing 09JUL2010 UKo HD F F Printing 09JUL2010 UKo HD F1 REVISED PER ECO-11-005150 25MAR2011 RK HMR 25MAR2011 F1 REVISED PER ECO-11-005150 UKo AK 14JUN2013 50Ω version F2 REVISED PER ECO-11-017072 (ECR-13-009645) UKo AK 75Ω version REVISED PER ECO-13-009645 18JUN2013 UKo AK F2 +0.1 +0.1 +0.1 +0.1 14.9 7.5-0.1 -0.1 14.9 7.5-0.1 -0.1 A A 4.9 4.9 Coplanarity<=0.10mm Coplanarity<=0.10mm 6.7 6.7 +0.5 +0.5 16 +0.2 -0.5 16 +0.2 9.4 -0.5 -0.2 9.4 -0.2 0.3 A 0.3 A +0.1 +0.1 +0.1 +0.1 5.08-0.1 5.08-0.1 5.08-0.1 5.08-0.1 17.2 17.2 +0.1 +0.1 +0.1 +0.1 3.81-0.1 3.81-0.1 3.81 3.81 -0.1 -0.1 15 15 +0.1 +0.1 +0.1 +0.1 2.54 2.54 -0.1 -0.1 2.54 2.54 -0.1 -0.1 1.375 1.375 1.375 1.375 0.8 0.8 0.4 0.5 0.8 0.4 0.9 0.9 0.6 0.6 1.15 0.9 0.7 1.15 0.9 0.7 22 21 20 19 17 14 13 12 15 22 21 20 19 17 15 14 13 12 1.4 1.4 0.9 0.9 0.8 0.8 0.5 2.2 0.8 0.5 0.5 2.2 +0.1 +0.1 +0.1 +0.1 1.27 1.27 -0.1 -0.1 1.27 1.27 -0.1 -0.1 +0.1 +0.1 1 2 5 6 7 10 11 1 +0.1 +0.1 2 5 6 7 10 11 5.08 5.08 Relay Relay -0.1 -0.1 5.08 5.08 -0.1 -0.1 housing housing +0.15 +0.15 0.9 0.9 +0.15 +0.15 0.9 0.9 6.35 6.35 1.1 -0.15 -0.15 6.35 6.35 1.1 -0.15 -0.15 1.27 1.27 0.9 0.6 2.54 2.54 0.7 XX = Relay type 0.5 XX = Relay type 3 zz = nominal voltage 3.075 3.075 zz = nominal voltage 3.075 3.075 03-2017, YYWW = Date code Rev. 0317 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- YYWW = Date code NNNN = Lot number www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all cha NNNN = Lot number pters of tion, application notes and all specifications © 2015 DIMENSIONS: Tyco Electronics Corpora DWN tion, 26JAN2007 MATERIAL only together with the ‘Definitions’ section. FINISH the ‘Definitions’ section, available at are subject to change. DIMENSIONS: DWN 06NOV2006 MATERIAL FINISH UKo 9193 - - - - UKo 9193 a TE Connectivity Ltd. mm company http://relays.te.com/definitions mm CHK 26JAN2007 CHK 06NOV2006 HD 9121 HD 9121 TOLERANCES UNLESS TOLERANCES UNLESS OTHERWISE SPECIFIED: APVD 26JAN2007 TE Connectivity OTHERWISE SPECIFIED: APVD 06NOV2006 TE Connectivity HD 9121 DIN 7168-m DIN 7168-m HD 9121 PRODUCT SPEC PRODUCT SPEC 0 PLC - NAME 0 PLC - NAME 1 PLC - HF3-Relay metal cover 50 1 PLC - HF3-Relay metal cover 75 - - 2 PLC - 2 PLC - Dimensions 3 PLC - Dimensions APPLICATION SPEC 3 PLC - APPLICATION SPEC 4 PLC - 4 PLC - SIZE CAGE CODE DRAWING NO RESTRICTED TO SIZE CAGE CODE DRAWING NO RESTRICTED TO ANGLES - - ANGLES - - WEIGHT 00779 1462051-3 - WEIGHT 00779 1462050-3 - A4 - - A4 SCALE SHEET OF REV SCALE SHEET OF REV CUSTOMER DRAWING 1 1 CUSTOMER DRAWING 3:1 F2 3:1 1 1 F2 1469-35 (3/11) 1469-35 (3/11) 4° 3 3 4° THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION 2006 ALL RIGHTS RESERVED. C COPYRIGHT2006 BY TE Connectivity +0.5 8.6-0.5 10 7 6 5 +0.3 0.9 0 +0.5 10.5 0 3.1 7.6 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION 2006 ALL RIGHTS RESERVED. C COPYRIGHT2006 BY TE Connectivity +0.5 8.6 -0.5 10 7 6 5 +0.3 0.9 0 +0.5 10.5 0 3.1 7.6 RF Signal Relays AXICOM HF3 S Relay (Continued) Processing Packing Tape and reel for SMT Recommended reflow soldering profile IEC 61760-1 Resistance to soldering heat - reflow profile IEC 60068-2-58 Reel dimensions Recommended soldering conditions Vapour phase soldering 20 to 40s full line: typical dotted line: process limits 240°C 180°C forced cooling 130°C external preheating 100°C Vapour phase soldering temperature/time profile (lead and housing peak temp.) Time [s] 4 03-2017, Rev. 0317 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions Temperature [°C] RF Signal Relays AXICOM HF3 S Relay (Continued) Product code structure Typical product code HF3 53 S Type HF3 High Frequency Relays HF3S Series 1 form C, 1 CO Coil Coil code: please refer to coil versions table Performance type 5x 50Ω version, monostable 1coil 0x 75Ω version, monostable 1coil 7x 50Ω version, bistable 1coil 2x 75Ω version, bistable 1coil 9x 50Ω version, bistable 2coils 4x 75Ω version, bistable 2coils Type S High performance / shielded Product code Arrangement Version Coil Coil Type Part number HF3 53S 1 form C (1 CO) 50ohm 5VDC Monostable 2-1462051-3 HF3 55S 9VDC 4-1462051-0 HF3 56S 12VDC 3-1462051-1 HF3 57S 24VDC 2-1462051-2 HF3 92S 4.5VDC Bistable 2 coils 2-1462051-5 HF3 93S 5VDC 2-1462051-4 HF3 95S 9VDC 4-1462051-1 HF3 95S 9VDC 4-1462051-1 HF3 03S 75ohm 5VDC Monostable 2-1462050-2 HF3 05S 9VDC 3-1462050-3 HF3 06S 12VDC 2-1462050-7 This list represents the most common types and does not show all variants covered by this data sheet. 5 03-2017, Rev. 0317 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions