2-1618274-9 - TE CONNECTIVITY - Electronics Finder

Description

Electromechanical Relay 26.5VDC 335Ohm 25A SPDT Threaded Mount Voltage Relay
2-1618274-9

Part Number

2-1618274-9

Price

Request Quote

Manufacturer

TE CONNECTIVITY

Lead Time

Request Quote

Category

Relays and I/O Modules » Relay Other

Specifications

Manufacturer

TE Connectivity

Manufacturers Part #

2-1618274-9

Industry Aliases

HC-2

Sub-Category

Other Relays

Brand

Raychem Wire and Tubing

Factory Pack Quantity

Datasheet

DDEController?Action=showdoc&DocId=Catalog+Section%7F5-1773450-5_sec7_HC-1%7F0313%7Fpdf%7FEnglish%7FENG_CS_5-1773450-5_sec7_HC-1_0313_5-1773450-5_Sec7_HC.pdf

479 KiB

Download

Extracted Text

KILOVAC High Voltage Relays HC Series — 3.5 kV Relays HC-1 No Load Switching HC-3 Make & Break Load Switching Product Facts for HC-1 n Widely used for RF applications n Vacuum dielectric for low leakage current applications n Copper contacts for high current capability Product Facts for HC-3 n Not designed for power switching n Tungsten contacts for For factory-direct application assistance, long life when power dial 800-253-4560, ext. 2055, or n Meets requirements of switching 805-220-2055. MIL-R-83725 n Vacuum dielectric for power n QPL version available, switching low current loads M83725/5-001 HC-5 Make Only Load Switching Product Facts for HC-5 n Gas-filled for “make only” power switching n SF-6 gas-filled for capacitive discharge applications n Tungsten contacts for long life when power switching Open Contacts to Ground — Product Specifications for HC-1 —2.5 pF HC-1, HC-3 and HC-5 Contact Arrangement — SPDT Contact Resistance, Max. — Coil Data Contact Form — C HC-1 — 0.01 ohm Test Voltage, DC or 60 Hz (Peak) — Nominal Volts DC 12 Vdc 26.5 Vdc 115 Vdc HC-3 — 0.02 ohm 5 kV Pickup, Max. 8 Vdc 16 Vdc 80 Vdc HC-5 — 0.50 ohm* Rated Operating Voltage (Peak) — Dropout .5-5 Vdc 1-10 Vdc 5-50 Vdc Operate Time, Max. — 6 ms DC or 60 Hz — 3.5 kV Coil Resistance (±10%) 80 Ω 335 Ω 6000 Ω Release Time, Max. — 6 ms 2.5 MHz — 2.5 kV Ratings listed are for 25°C, sea level conditions Shock, 11ms, 1/2 Sine (Peak) — 16 MHz — 2 kV 50 g 32 MHz — 1.5 kV Vibration — Continuous Carry Current, Max. — Peak — 10 g (55 to 2000 Hz) Ordering Information DC or 60 Hz — HC-1 — 25 A HC-3 — 18 A Operating Ambient Temperature HC-5 — 8 A Range — -55°C to +125°C Sample Part Number HC- 1 /12Vdc 2.5 MHz — HC-1 — 14 A Mechanical Life — Series: HC-1, HC-3 — 2 million cycles 16 MHz — HC-1 — 9 A HC-5 — 1 million cycles Model: Weight, Nominal — 1 32 MHz — HC-1 — 7 A 28.35 g (1.0 oz.) 3 Note: Coil Hi-Pot (Vrms, 60 Hz) — 500 A 5 *Contact resistance for gas-filled Contact Capacitance — Coil Voltage: relays is measured at 28 Vdc, 1 Between Open Contacts — Amp Blank = 26.5 Vdc HC-1 —2 pF /12Vdc = 12 Vdc /115Vdc = 115 Vdc 7–58 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. KILOVAC High Voltage Relays HC Series — 8 kV Relays HC-2 No Load Switching HC-4 Make & Break Load Switching Product Facts for HC-2 n Vacuum dielectric and copper contacts for high current carry rating of 25 Amps n Not designed for power switching Product Facts for HC-4 n Stable, low contact n Tungsten contacts for long n Meets requirements of resistance life in power switching MIL-R-83725 n Meets requirements of applications MIL-R-83725 n Vacuum dielectric for arc suppression when making or breaking a load HC-6 Make Only Load Switching Product Facts for HC-6 n Tungsten contacts for switching high in-rush loads n SF-6 gas-filled for capacitive discharge applications n Suitable for ESD testing applications n Tungsten contacts for long life in power switching applications Product Specifications for Shock, 11ms, 1/2 Sine (Peak) — 50 g HC-2, HC-4 and HC-6 Coil Data Vibration — Contact Arrangement — SPDT Peak — 10 g (55 to 2000 Hz) Nominal Volts DC 12 Vdc 26.5 Vdc 115 Vdc Contact Form — C Operating Ambient Temperature Pickup, Max. 8 Vdc 16 Vdc 80 Vdc Test Voltage, DC or 60 Hz (Peak) — Range — -55°C to +125°C Dropout .5-5 Vdc 1-10 Vdc 5-50 Vdc 10 kV Mechanical Life — Coil Resistance (±10%) 80 Ω 335 Ω 6000 Ω Rated Operating Voltage (Peak) — HC-2 and HC-4 — 2 million cycles DC or 60 Hz — 8 kV Ratings listed are for 25°C, sea level conditions HC-6 — 1 million cycle Continuous Carry Current, Max. — Weight, Nominal — DC or 60 Hz — HC-2 — 25 A RMS 39.69 g (1.4 oz.) HC-4 — 15 A RMS HC-6 — 8 A RMS *Contact resistance for gas-filled Ordering Information Coil Hi-Pot (Vrms, 60 Hz) — 500 A RMS relays is measured at 28 Vdc, 1 Amp Contact Capacitance — Between Open Contacts — N/A Sample Part Number HC- 6 /12Vdc Open Contacts to Ground — N/A Series: Contact Resistance, Max. — HC-2 — 0.01 ohm Model: HC-4 — 0.02 ohm 24 6 HC-6 — 0.5 ohm* Coil Voltage: Operate Time, Max. — 6 ms For factory-direct application assistance, Blank = 26.5 Vdc Release Time, Max. — 6 ms dial 800-253-4560, ext. 2055, or /12Vdc = 12 Vdc 805-220-2055. /115Vdc = 115 Vdc 7–64 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products