TE CONNECTIVITY 2-1926733-5

MINIPAK HDL Connectors TE Connectivity’s MINIPAK HDL connector combines a high density power interface into a blind-mateable board-to-board connector, which stands only 8mm off the edge of the printed circuit board. The MINIPAK HDL product consists of a right angle plug and a right angle receptacle, which utilizes an eye of the needle tail that can be used in both solder and press- fit applications. The contact offers a current rating of 16 amps, low contact resistance, and mating forces less than 0.3 pounds per contact. The connector is designed and manufactured to be mass-customizable, allowing the customer to select a wide array of configurations and layouts. MINIPAK HDL connectors also contain three levels of mating sequences. This product is designed specifically for modular hot-swappable power distribution systems. The MINIPAK HDL connector offers 20% more current density in a smaller package than other products currently offered in the market. te.com/products/minipakhdl TE Connectivity MINIPAK HDL Connectors APPLICATIONS • 1U Servers • High-end severs • Telecommunications switches requiring low profile • Hot pluggable power supplies MECHANICAL • Gatherability: +/- 2mm radial misalignment • Mating forces of 1.5 N max per power contact • Single piece molded housing for best strength and alignment • Durabillity - 250 mating cycles KEY FEATuRES • Wipe - min of 2.5mm on shortest signal • 3 levels of sequencing • High density, low profile, power/signal blind-mate conector • Developed to meet next-generation SPECIFICIATIONS 1U application by reducing airflow impedance • Maximum operating temperature - 120°C • Current rating - 16 amps • Customizable design • Serves both solder reflow and press fit applications with the same contact PRODuCT DIMENSIONS The connector configuration is described by reading left to right on the plug and right to TECHNICAL DOCuMENTS left on the receptacle. • Product Specification: 108-2325 For example, the connector shown would be described 25SX10P. • Application Specification: 114-13215 A wide variety of additional configurations can beproduced due to the modular design of the product. Some popular configurations are shown here. TE Technical Support Center Internet: te.com/help USA: +1 (800) 522-6752 PART NuMbERS Canada: +1 (905) 475-6222 Mexico +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Configuration Right Angle Plug Right Angle Receptacle Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 25S/10P 2-1926732-5 2-1926733-5 France: +33 (0) 1-3420-8686 25S16P 4-1926732-6 4-1926733-6 Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015 6p/15s/6p 1-1926720-6 1-1926721-6 8P/25S/8P 2-1926720-5 2-1926721-5 te.com Note: Part Numbers are RoHS compliant. © 2013 Tyco Electronics Corporation, a TE Connectivity Ltd. company. All Rights Reserved. 8-1773448-5 DTC PDF 12/2013 MINIPAK, TE Connectivity and the TE connectiv- ity (logo) are trademarks. Other logos, product and company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this brochure are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications.