Introducing “Star Board” LED Pixel Holder “Star Board” LED Pixel Holder KEY FEATURES DESCRIPTION Modular LED assembly holder that can be easily integrated into • Design combines thermal and electrical standard, direct lighting fixtures connections to the hexagonal “Star” Easy, snap-together solderless thermal and electrical termination LED board configurations offered by LED manufacturers such as Philips/Lumileds, APPLICATIONS Cree, Osram, Seoul Semiconductor, and Plug and play capability which easily integrates into LED light fixtures Nichia Used in: office, residential, or architectural lighting • Design allows for versatility in mounting monochromatic and RGB “Star” LEDs ELECTRICAL without the need for solder (Note: RGB Operating Current: Up to 2.5 Amps uses 4 wire common anode) Operating Voltage: Up to 50VDC • Consists of a heat sink, locking ring, and LED Wattage Rating*: 0.5 to 3 Watts with Tyco Electronics heat sink contact carrier MECHANICAL • 3 Watts using standard Tyco Electronics Number of Positions: 2 contact loading for single-color LEDs and 4 heatsink* tooled to fit in standard contact loading for full color (RGB) LEDs GU10/MR16 light fixtures Wire Interface: Tyco Electronics 110 FASTON Receptacle Durability: 10 cycles • Design fits into the same envelope as Environmental Operating Temperature: -40 to 120 degree C an MR16 with it’s socket • Optional Tyco Electronics diffuser lens MATERIALS available Contacts: Copper Alloy Finish: Tin over Nickel • Optional Tyco Electronics integral LED LED “Star” board: Customer supplied driver available Contact Carrier and Locking Ring: Plastic (PBT) • Standard 110 FASTON Receptacle quick Heatsink: Cast Aluminum connects for easy Class 2 power wiring STANDARDS & SPECS • LED Holder allows for replacement of the star board after installation and can UL: UL 8750 Product Specification: 108-2350 accommodate star board thicknesses in Application Specification: 114-13227 the range of 1.0mm to 2.5mm * NOTICE: A Proper LED Thermal Management Plan is Required for All High Power LED Applications. The standard Tyco Electronics heatsink was tested under 40 degree ambient conditions inside a typical GU10 style semi-enclosed track light fixture without any forced air cooling using a Philips LUMILEDS LUXEON III LED. Higher or lower wattage LEDs can be used with this holder if the application conditions are appropriate. The application conditions to be considered include: ambient temperature, airflow, light fixture design, enclosure volume, holder orientation, thermal interface material, the selected LED's thermal characteristics/limitations, and other application specific factors. The customer will need to test their fixture with their selected LED under the expected ambient conditions of the final application to determine if their complete application meets the LED's junction temperature requirements as specified by the LED manufacturer. If the Tyco Electronics I “Star Board” LED's junction temperature requirements are exceeded, LED failure or reduced LED lumen maintenance can be expect- ed. Please contact Tyco Electronics for technical assistance regarding this "Star Board" LED Pixel Holder if there are any LED Pixel Holder questions about High Power LED Thermal Management. “Star Board” LED Pixel Holder PRODUCT DRAWING Diffuser Lens (optional item P/N 2008671-1) Thermally conductive pad (optional item P/N 2058329-1) Star LED (not supplied) REF Heat Sink Contact Carrier Assembly Locking Ring Reference Standard Star Board Package Dimension PRODUCT OFFERING • 2008675-1 “Star” LED Holder Kit (includes contact carrier, locking ring and heat sink) • 2008671-1 Diffuser lens (optional) • 2058329-1 Thermal Interface Pad (optional) APPLICATION TOOLING Standard long nose pliers required to install locking ring “Star Board” LED Pixel Holder I Tyco Electronics FOR MORE INFORMATION Technical Support Internet: www.tycoelectronics.com E-mail: newproducts@tycoelectronics.com USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 1-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-8706-080208 Tyco Electronics Corporation Harrisburg, PA tycoelectronics.com Copyright 2008 Tyco Electronics Corporation. All rights reserved. 1773452-1 - 5k -MS/FP - 7/2008. FASTON, TE Logo and Tyco Electronics are trademarks.