208M920-19B11 - TE CONNECTIVITY - Electronics Finder

Description

Shrink Boot Adapters 90° 21 Shell Size Cadmium Over Electroless Nickel Aluminum Alloy
208M920-19B11

Part Number

208M920-19B11

Price

Request Quote

Manufacturer

TE CONNECTIVITY

Lead Time

Request Quote

Category

Connectors » Shrink Boot Adapters

Specifications

Manufacturer

TE Connectivity

Manufacturers Part #

208M920-19B11

Lead Time

12 Week Lead Time

Industry Aliases

208M920-19B11, CN4532-000

Sub-Category

Shrink Boot Adapters

Brand

Raychem Wire and Tubing

Factory Pack Quantity

Datasheet

DDEController?Action=showdoc&DocId=Customer+Drawing%7F208M9XX%7FL%7Fpdf%7FEnglish%7FENG_CD_208M9XX_L.pdf

1035 KiB

Download

Extracted Text

ASSY USED ON: CODE 40 - BRAID TAIL BACKSHELL 208M916-19B08 SERIES DASH NUMBER (TABLE 1) MATERIAL REFER TO CH00-0250-004 FINISH REFER TO CH00-0250-004 2 ENTRY SIZE (TABLE 2) NOTES: 1. THIS PRODUCT IS DESIGNED TO TERMINATE A HEAT SHRINKABLE LIPPED BOOT TO A CONNECTOR. 2. FOR ADDITIONAL DIMENSIONS, ORDERING INFORMATION AND MODIFICATIONS, SEE CH00-0250-004 3. BACKSHELL TO BE PERMANENTLY MARKED/BAGGED AND LABELLED WITH CODE IDENTIFICATION NUMBER AND PART NUMBER. (e.g. 06090-208M912-19B08). 4. WHEN ENTRY SIZE EXCEEDS "MAX ENTRY", A 2 PIECE BACKSHELL (TYPE 2) IS SUPPLIED. 5. BRAID TERMINATION RING MAY BE SUPPLIED AS TINEL-LOCK SHAPE MEMORY RING AT MANUFACTURERS OPTION. 6. BACKSHELL MATES TO MIL-DTL-38999 SERIES III & IV, CLASS C, F, K AND W, D38999/20, /24, /26, /40, /46, /47 CONNECTORS AND WHEN SO MATED SHALL PROVIDE A WATER-TIGHT SEAL MEETING THE REQUIREMENTS OF MIL-C-85049, PAR. 3.5.7. D A TE 3RD ANGLE D R AW N K.WINCZURA T I T L E : PROJECTION 12/06/2015 NOT TO CHECKED 12/06/2015 SCALE BRAID TAIL BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 10/07/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 16/07/2015 ANGULAR +/- 1° REVISIONS LTR DATE APPROVED DESCRIPTION MIL-DTL-38999 SERIES III & IV M 06/04/2014 I.M REVISED PER ECO-14-008400 N REVISED PER ECO-15-010349 16/07/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 208M9XX N 1 POLAMCO/TE CAGE CODE: U5792 ASSY USED ON: IF MAX ENTRY IS EXCEEDED BACKSHELL WILL BE SUPPLIED AS TYPE 2 H W 16,80`0,50 SILICONE T M O-RING SILICONE SILICONE O-RING O-RING PART MARK PART MARK HERE HERE 4 ØZ ØY TINNED COPPER SHIELD 90° BACKSHELL - TYPE 2 90° BACKSHELL - TYPE 1 H W 16,80`0,50 T M 90° BACKSHELL - TYPE 1 90° BACKSHELL - TYPE 2 STAINLESS STEEL AND STAINLESS STEEL AND NICKEL ALUMINIUM BRONZE NICKEL ALUMINIUM BRONZE D A TE 3RD ANGLE D R AW N K.WINCZURA T I T L E : PROJECTION 12/06/2015 NOT TO CHECKED 12/06/2015 SCALE BRAID TAIL BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 10/07/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 16/07/2015 ANGULAR +/- 1° REVISIONS LTR DATE APPROVED DESCRIPTION MIL-DTL-38999 SERIES III & IV M 06/04/2014 I.M REVISED PER ECO-14-008400 N REVISED PER ECO-15-010349 16/07/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 208M9XX N 2 POLAMCO/TE CAGE CODE: U5792 ØB A THREAD XXXX 152,4 MIN E 152,4 MIN E ØK ØB A THREAD XXXX 152,4 MIN J 152,4 MIN J ASSY USED ON: THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE TABLE 1 ORDER SHELL SIZE MAX W T E W T E ØB A THREAD ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 NUMBER COM'L / MIL MAX ENTRY 18,0 21,0 14,0 24,0 21,2 16,3 24,0 208M908 9 / A M12x1.0 04 208M910 11 / B M15x1.0 21,0 07 24,0 15,5 25,7 24,3 17,2 25,7 24,5 27,0 17,0 27,2 28,3 19,4 27,2 208M912 13 / C M18x1.0 09 208M914 15 / D M22x1.0 29,0 10 31,0 19,5 28,7 31,1 21,0 28,7 32,5 34,0 21,0 30,4 34,2 22,8 30,4 208M916 17 / E M25x1.0 12 208M918 19 / F M28x1.0 35,5 14 35,0 20,0 32,0 38,5 25,3 32,0 208M920 21 / G M31x1.0 37,0 16 38,0 21,5 33,6 40,7 26,1 33,6 40,0 42,0 24,0 35,1 43,7 27,6 35,1 208M922 23 / H M34x1.0 18 208M924 25 / J M37x1.0 43,5 20 45,0 25,5 36,6 46,4 29,1 36,6 THESE DIMENSIONS APPLY IF BACKSHELL IS STAINLESS STEEL OR NICKEL ALUMINIUM BRONZE TABLE 2 H M J H M J ENTRY ØK ØZ ØY SIZE ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 ±0,5 MAX REF REF 4,77 03 NA 13,1 NA NA NA NA NA NA 6,35 13,1 04 NA NA NA NA NA NA NA 05 21,0 7,92 13,1 24,0 15,5 25,7 24,3 17,2 25,7 21,0 9,52 17,9 24,0 15,5 25,7 24,3 17,2 25,7 06 07 21,0 11,12 17,9 24,0 15,5 25,7 24,3 17,2 25,7 24,5 12,70 17,9 27,0 17,0 27,2 28,3 19,4 27,2 08 09 24,5 14,27 17,9 27,0 17,0 27,2 28,3 19,4 27,2 29,0 15,87 24,2 31,0 19,5 28,7 31,1 21,0 28,7 10 32,5 17,47 24,2 34,0 21,0 30,4 34,2 22,8 30,4 11 12 32,5 19,05 24,2 34,0 21,0 30,4 34,2 22,8 30,4 35,5 20,62 24,2 35,0 20,0 32,1 38,5 25,3 32,1 13 14 35,5 22,23 30,6 35,0 20,0 32,1 38,5 25,3 32,1 37,0 23,82 30,6 38,0 21,5 33,7 40,7 26,1 33,7 15 16 37,0 25,40 30,6 38,0 21,5 33,7 40,7 26,1 33,7 40,0 26,98 33,2 42,0 24,0 35,2 43,7 27,6 35,2 17 18 40,0 28,60 33,2 42,0 24,0 35,2 43,7 27,6 35,2 20 43,5 31,80 42,0 45,0 25,5 36,7 46,4 29,1 36,7 48,5 33,34 42,0 54,5 31,0 39,8 50,0 31,0 39,8 21 22 48,5 35,00 42,0 54,5 31,0 39,8 50,0 31,0 39,8 52,1 38,10 42,0 58,0 33,0 43,8 53,5 33,0 43,8 24 28 58,5 44,45 49,0 65,5 36,5 48,9 60,3 36,5 48,9 D A TE 3RD ANGLE D R AW N K.WINCZURA T I T L E : PROJECTION 12/06/2015 NOT TO CHECKED 12/06/2015 SCALE BRAID TAIL BACKSHELL UNLESS OTHERWISE SPECIFIED APPROVED K.SHEPPARD 10/07/2015 ALL DIMENSIONS IN MILLIMETRES GENERAL TOL LINEAR +/-0,25MM APPROVED H.SMITH 16/07/2015 ANGULAR +/- 1° REVISIONS LTR DATE APPROVED DESCRIPTION MIL-DTL-38999 SERIES III & IV M 06/04/2014 I.M REVISED PER ECO-14-008400 N REVISED PER ECO-15-010349 16/07/2015 H.SMITH TE CONNECTIVITY - POLAM CO LTD RESERVES THE RIGHT TO AMEND THIS DRAW ING DRAWING NO: DRAWING REV: SHT TE CAGE CODE: 06090 AND THE INFORMATION SET FORTH HEREON AT ANY TIM E. USERS SHOULD INDEPENDENTLY EVALUATE THE SUITABILITY OF THE PRODUCT FOR THEIR APPLICATION. 208M9XX N 3 POLAMCO/TE CAGE CODE: U5792

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products