General Purpose Relays Industrial Relays Potter & Brumfield KUEP Series Panel Plug-in Relay n 1 Form X, 2 Form A and 2 Form C contact arrangements n 10 amp current rating n Magnetic blow-out n Various mounting options n Indicator lamp available Typical applications DC load switching in industrial controls Approvals Coil Data UL E22575; CSA LR15734; CE (KUEP-11 only) Coil voltage range 5 to 125VDC Technical data of approved types on request 6 to 240VAC Coil insulation system according UL Class B Contact Data Coil versions, DC coil Contact arrangement 1 form X (NO-DM), 2 form A (NO), 2 form C (CO) Coil Rated Operate Coil Rated coil Rated voltage 150VDC code voltage voltage resistance power Rated current 10A VDC VDC Ω±10% W Contact material AgCdO AgSnOInO One pole versions Min. recommended contact load 300mA, 12VDC 5 5 3.75 21 1.2 Frequency of operation 360 ops./hour 360 ops./hour 6 6 4.5 32 1.125 Operate/releases time max. 15/10ms 12 12 9.0 120 1.2 Bounce time max. 17ms 24 24 18.0 472 1.25 48 48 36.0 1800 1.3 Contact ratings 110 110 82.5 10000 1.25 Type Load Cycles 125 125 93.75 13000 1.2 UL 508 Two pole versions KUEP, 1 form X, AgCdO 5 5 3.75 14 1.8 3 10A, 150VDC 100x10 6 6 4.5 20 1.8 3 1A, 300VDC 100x10 12 12 9.0 80 1.8 3 2.5 A, 170 VDC, resistive 100x10 24 24 18.0 320 1.8 KUEP, 2 form A, AgCdO 48 48 36.0 1250 1.85 5 A, 150 VDC 110 110 82.5 6720 1.8 3 2.5 A, 170 VDC, resistive 100x10 125 125 93.75 8680 1.8 KUEP, 2 form C, AgCdO All figures are given for coil without preenergization, at ambient temperature +23°C. 3 A, 150 VDC 3 2.5 A, 170 VDC, resistive 100x10 Coil versions, AC coil 10 A, 240 VAC Coil Rated Operate Coil Rated coil 10 A, 32 VDC code voltage voltage resistance power 5 FLA, 15 LRA, 250 VAC VAC VAC Ω±15% VA 1/3 HP, 120 VAC One pole versions 5 A, 120 VAC, tungsten 6 6 5.1 6 2.0 1/2 HP, 250 VAC 12 12 10.2 24 2.0 10 FLA, 40 LRA, 125 VAC 24 24 20.4 85 2.0 3 A, 600 VAC 120 120 102.0 2250 2.1 1/2 HP, 480 VAC 240 240 204.0 9110 2.1 1/2 HP, 600 VAC Two pole versions 1 HP, 480 VAC, 3 phase 6 6 5.1 4.2 2.8 KUEP, 1 form X, AgSnOInO 12 12 10.2 18 2.8 3 10A, 150VDC, resistive 30x10 24 24 20.4 72 2.8 KUEP, 2 form A, AgSnOInO 120 120 102.0 1700 2.9 3 5 A, 150 VDC, resistive 100x10 240 240 204.0 7200 2.9 KUEP, 2 form C, AgSnOInO 3 3 A, 150 VDC, resistive 100x10 All figures are given for coil without preenergization, at ambient temperature +23°C. 6 Mechanical endurance 10x10 ops. Insulation Data Initial dielectric strength between open contacts 1200V rms between contact and coil 2200V rms between adjacent contacts 2200V rms Initial insulation resistance between insulated elements 100MΩ 1 12-2016, Rev. 1216 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions General Purpose Relays Industrial Relays Potter & Brumfield KUEP Series Panel Plug-in Relay (Continued) Other Data Other Data (Continued) Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Weight 85g refer to the Product Compliance Support Center at Packaging/unit tray/25 pcs., box/150pcs. www.te.com/customersupport/rohssupportcenter Ambient temperature DC coil -45ºC to 70ºC Accessories AC coil 1 pole: -45ºC to 55ºC For details see datasheet Sockets and Accessories, KUP Relays 2 pole: -45ºC to 45ºC Category of environmental protection Product Code Description IEC 61810 RTI - dust protected 27E893 DIN socket (use 20C318 clip) Vibration resistance (functional) .065” double amplitude, 10-55Hz 27E121 Track mount socket (use 20C314 clips) Shock resistance (functional) 15g, 11ms (non-operating) 27E043 Chassis mount/solder eyelet socket (use 20C254 clip) Terminal type Quick connects (QC), .187 or .205 27E046 Chassis mount/PCB socket (use 20C254 clip) PCB-THT 27E067 Chassis mount/quick connect socket (use 20C254 clip) Terminal retention, push force 27E396 Snap-in/quick connect socket (use 20C254 clip) QC .205 17 lbs for 3s QC .187 25 lbs for 3s Dimensions Plain case Bracket mount case .312 .078 R. TYP . 2.90 MAX. .625 TYP . TYP . (73.7) (1.98) (15.88) (7.92) X 1.906 MAX. (48.41) .75 (19.1) X 1.531 MAX. (38.89) X X X .375 X .437 (9.53) X 2.500 (11.10) (63.50) 1.531 MAX. (38.89) 1 2 3 1.406 MAX. 4 5 6 (35.71) .06 1.406 MAX. 7 8 9 (1.52) (35.71) A B 1.906 MAX. .07 (48.41) (1.8) Top flange case Core / stud mount case 1.518 MAX. .078 TYP . (38.56) (1.98) 1.906 MAX. X (48.41) 1 2 3 1.713 ± .003 4 5 6 (43.51 ± .08) 1.43 MAX. 7 8 9 1.989 ± .003 1.373 ± .010 .130 (36.27) (50.52) (34.87 ± .25) (3.30) AB 1.74 MAX. (44.2) 2.248 MAX. .178 TYP. STUD with (57.10) (4.52) #6-32 THREAD .312 or CORE TAPPED (7.92) X Is For Terminal Dimensions. #6-32 See Teminal Drawings. 1.29 (32.8) MAX. W/ .205 (5.21) QC .437 .010 (11.10 .25) 1.25 (31.8) MAX. W/ .187 (4.75) QC Terminal dimensions 4.75mm (.187) quick connect 5.21mm (.205) quick connect 1.19mm (.047) printed circuit .125 .156 .093 .093 .156 (2.36) (3.18) (3.96) (2.36) (3.96) .187±.002 .205± .002 HEADER .180 HEADER (4.75±.05) (5.21± .05) HEADER (4.57) .250 .078 .035 .285 (6.35) (1.98) .237 .156 (.89) (7.24) 281 REF. (6.02) (3.96) .047 .316 REF. (7.14) .268 REF. (8.03) (1.19) .020 (6.81) THICKNESS .032 (.51) THICKNESS .032 (.81) THICKNESS (.81) 2 12-2016, Rev. 1216 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions General Purpose Relays Industrial Relays Potter & Brumfield KUEP Series Panel Plug-in Relay (Continued) PCB layout Bottom view on solder pins 1 form X version 2 form C version shown (Omit unnecessary holes for form A types) .076 DIA. TYP. .206 .076 DIA. TYP. (1.93) (5.23) (1.93) .626 (15.90) .328 (8.33) .626 (15.90) .875 (22.23) .875 (22.23) Terminal assignment 1 Form X 2 Form A 2 Form C 1 3 – – 4 6 6 4 4 6 + + – – – + 7 9 7 9 – – + + AB B B A A Load polarity noted above is recommended for optimum arc suppression. Product code structure Typical product code KUEP -3 A 1 5 -120 Type KUEP Enclosed relay with magnetic blow-outs Contact arrangement and rating 3 1 form X (1 NO-DM) 7 2 form A (2 NO) 11 2 form C (2 CO) Coil Input A AC, 50/60Hz D DC Mounting and options 1) 1 Socket mount (plain) case 3 Socket mount (plain) case, with indicator lamp 5 Bracket mount case A Plain case with #6-32 stud and locating tab E Plain case with #6-32 tapped core and locating tab T Top flange case 1) Indicator lamps are available on models with the following coils: 6-24VAC and VDC, 110VDC and 120-240VAC. Only models with 120-240VAC coils are UL recognized. Terminal and contact material 5 4.75mm (.187in) quick connect/solder; AgCdO 6 5.21mm (.205in) quick connect/solder; AgCdO 7 1.19mm (.047in) PCB, AgCdO P 4.75mm (.187in) quick connect/solder; AgSnOInO R 5.21mm (.205in) quick connect/solder; AgSnOInO S 1.19mm (.047in) PCB, AgSnOInO Coil voltage Coil code: please refer to coil versions table Product Code Arrangement Material Coil Terminals Mounting Part Number KUEP-3A15-120 1 Form X, 1 NO-DM AgCdO 120 VAC 4.75mm (.187in) QC Socket mount, plain case 9-1393113-4 KUEP-3D15-12 12 VDC 9-1393113-8 KUEP-3D15-24 24 VDC 1393114-1 KUEP-3D15-48 48 VDC 1393114-2 KUEP-3D15-110 110 VDC 9-1393113-7 KUEP-3D35-24 24 VDC Socket mount, plain case w/ indicator lamp 1393114-5 KUEP-7D15-24 2 Form A, 2 NO Socket mount, plain case 1-1393114-1 KUEP-11A15-120 2 Form C, 2 CO 120 VAC 8-1393113-3 KUEP-11D15-12 12 VDC 8-1393113-6 KUEP-11D15-24 24 VDC 8-1393113-7 KUEP-11D15-48 48 VDC 8-1393113-8 KUEP-11D15-110 110 VDC 8-1393113-5 3 12-2016, Rev. 1216 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2015 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions