Heat-shrinkable Tubing RAYCHEM Tubing Products SCL 1 Semirigid, Encapsulant-Lined, Polyolefin Tubing Product Facts  3:1 shrink ratio  Splash-resistant, moisture- resistant covering; not intended for use where immersion in fluids is required  Rugged protection against abrasion, vibration, and flexing  Excellent strain relief and insulation of weak points  RoHS compliant Applications Installation Operating Temperature Range Encapsulates components, Minimum shrink -55°C to 110°C splices, and terminations temperature: 125°C [257°F] [-67°F to 230°F] where moisture resistance Minimum full recovery and mechanical protection temperature: 135°C [275°F] are required. Encapsulant melts and flows to fill surface irregularities of the substrate. While still hot, the tubing can be blocked to form a wire breakout. Specifications/Approvals Series UL Military Raychem SCL E85381 AMS-DTL-23053/4*, Class 1 RT-1301 600 V, 125°C *Formerly MIL-I-23053/4 and MIL-DTL-23053/4. Available in: Americas Europe Asia Pacific   1-109 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products SCL (Continued) Product Dimensions Inside Diameter Recovered Wall Thickness** Additional Minimum Maximum Meltable Wall Size Standard Color Expanded Recovered Total Wall After Heating as Supplied After Heating After Heating (Nominal) 1/8 Brown 3.2 [0.125] 0.6 [0.023] 0.96 ± 0.15 [0.038 ± 0.006] 0.51 [0.020] 3/16 Gray 4.8 [0.187] 1.5 [0.060] 1.09 ± 0.15 [0.043 ± 0.006] 0.64 [0.025] 1/4 White 6.4 [0.250] 2.0 [0.080] 1.19 ± 0.15 [0.047 ± 0.006] 0.69 [0.027] 3/8 Red 9.5 [0.375] 3.4 [0.135] 1.27 ± 0.18 [0.050 ± 0.007] 0.76 [0.030] 1/2 Blue 12.7 [0.500] 5.0 [0.195] 1.39 ± 0.18 [0.055 ± 0.007] 0.89 [0.035] 3/4 Yellow 19.1 [0.750] 8.0 [0.313] 1.65 ± 0.18 [0.065 ± 0.007] 1.02 [0.040] 1 N/A 25.4 [1.000] 10.2 [0.400] 1.90 ± 0.18 [0.075 ± 0.007] 1.02 [0.040] **Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) for all sizes, plus one additional color per size per Product Dimensions table. Size selection Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. Standard packaging In 1.2-meter [4-foot] lengths. Ordering description*** Specify product name, size and color (for example, SCL 1/4-0). ***Europe only. For supply to MIL spec., Def Stan and BS add -MS, -DS or -BS to ordering description. 1-110 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products SCT 1 Flame-Retardant, Adhesive-Lined, Semirigid Polyolefin Tubing (Extended Temperature Range) Product Facts  4:1 shrink ratio allows a few sizes to cover a wide range of splice and component diameters  Flame-retardant and mechanically tough, the tubing provides strain relief and abrasion protection of wire splices, terminals, and other components  Thick adhesive liner forms an effective barrier against fluids and moisture and performs well at an extended temperature range  RoHS compliant Applications Installation Operating Temperature Range Specially designed to Minimum shrink -40°C to 150°C insulate and seal temperature: 110°C [230°F] [-40°F to 302°F] automotive wire splices Minimum full recovery and components in an temperature: 135°C [266°F] under-the-hood automotive environment. Specially formulated to function at an extended temperature range. Specifications/Approvals Series Raychem SCT SCT SCD Available in: Americas Europe Asia Pacific   1-111 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products SCT (Continued) Product Dimensions Inside Diameter Recovered Wall Thickness* Part Minimum Maximum Meltable Wall Total Wall Number Expanded Recovered After Heating After Heating as Supplied After Heating (Nominal) SCT No. 1 7.6 [0.300] 1.7 [0.065] 1.52 ± 0.30 [0.060 ± 0 .012] 0.76 [0.030] SCT No. 2 9.0 [0.355] 2.3 [0.090] 1.52 ± 0.30 [0.060 ± 0 .012] 0.76 [0.030] SCT No. 3 11.6 [0.455] 2.5 [0.100] 2.29 ± 0.30 [0.090 ± 0.012] 1.40 [0.055] SCT No. 4 17.8 [0.700] 4.4 [0.175] 2.54 ± 0.30 [0.100 ± 0.012] 1.52 [0.060] *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Black Size selection Always order the largest size that will shrink snugly over the component being covered. Special order sizes are available upon request. Standard packaging Cut pieces. Marking Tubing will be printed with its numbered size (such as SCT-1, SCT-2, SCT-3, SCT-4). Ordering description Specify product name, numbered size, color and cut length (for example, SCT-NO.3-E3-0-75MM). 1-112 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products SFR 1 Very Flexible, Flame-Retardant, Silicone Elastomer Tubing Product Facts  Outstanding low-temperature flexibility  Resistance to hydraulic fluids, fuel, and lubricating oil  Very good ablative characteristics: when exposed to flame, surface turns to insulative char or “ablates”  RoHS compliant Applications Installation Operating Temperature Range Provides cable jacketing, Minimum shrink -75°C to 180°C harness protection, and temperature: 135°C [285°F] [-103°F to 356°F] strain relief for electronic Minimum full recovery components, semi- temperature: 175°C [347°F] conductor leads, and wire splices. Suitable for applications that require flexibility over a wide range of operating temperatures. Specifications/Approvals Series Military Raychem SFR AMS-DTL-23053/10* RT-1140 MIL-PRF-46846, Type II, Class 1 *Formerly MIL-I-23053/10 and MIL-DTL-23053/10. Available in: Americas Europe Asia Pacific   1-113 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products SFR (Continued) Product Dimensions Inside Diameter Recovered Wall Thickness** Size Minimum Expanded Maximum Recovered After Heating as Supplied After Heating 1/4 6.4 [0.250] 3.6 [0.143] 0.88 ± 0.25 [0.035 ± 0.010] 3/8 9.5 [0.375] 5.4 [0.214] 1.02 ± 0.25 [0.040 ± 0.010] 1/2 12.7 [0.500] 7.3 [0.286] 1.21 ± 0.38 [0.048 ± 0.015] 5/8 15.9 [0.625] 9.1 [0.357] 1.32 ± 0.38 [0.052 ± 0.015] 3/4 19.1 [0.750] 10.9 [0.428] 1.44 ± 0.38 [0.057 ± 0.015] 7/8 22.2 [0.875] 12.7 [0.500] 1.65 ± 0.38 [0.065 ± 0.015] 1 25.4 [1.000] 14.5 [0.570] 1.77 ± 0.51 [0.070 ± 0.020] 1 1/4 31.8 [1.250] 18.1 [0.714] 2.21 ± 0.51 [0.087 ± 0.020] 1 1/2 38.1 [1.500] 21.8 [0.857] 2.41 ± 0.51 [0.095 ± 0.020] 1 3/4 44.5 [1.750] 25.4 [1.000] 2.71 ± 0.51 [0.107 ± 0.020] 2 50.8 [2.000] 29.0 [1.140] 2.79 ± 0.51 [0.110 ± 0.020] **Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) Size selection Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. Standard packaging On spools. Ordering description*** Specify product name, size and color (for example, SFR 1/4-0). ***Europe only. For supply to MIL spec., Def Stan and BS add -MS, -DS or -BS to ordering description. 1-114 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products SRFR 1 Highly Flexible, Silicone Rubber Tubing Product Facts  Highly flame-retardant  Extremely flexible at high and low temperatures  Shrink ratio 1.5:1 minimum except sizes 4/2.9 and 29/20  RoHS compliant Applications electrical properties. SRFR Installation is used in medical Highly flexible and Minimum shrink equipment where its key resistant to high and low temperature: 135°C [275°F] properties are outstanding temperatures. Unlike other flexibility and ability to Minimum full recovery silicone materials, SRFR withstand exposure to temperature: 175°C [347°F] displays outstanding sterilization conditions. physical strength. It resists Other applications include extreme heat shocks, and Operating Temperature Range thyristor power cable exhibits good thermal insulation, heating element -75°C to 200°C insulation. SRFR is non- and bus bar insulation, fiber [-103°F to 392°F] burning and has optic bundle sheathing, outstanding ablative and rocketry support cable properties as well as protection. excellent physical and Specifications/Approvals Series UL Raychem SRFR E85381 VW-1 RT-1142 600V, 200°C RW-2057 Available in: Americas Europe Asia Pacific   1-115 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products SRFR (Continued) Product Dimensions Inside Diameter Recovered Wall Thickness* Size Minimum Expanded Maximum Recovered After Heating as Supplied After Heating 2.9/1.7 2.9 [0.114] 1.7 [0.067] 1.0 ± 0.50 [0.039 ± 0.020] 4/2.9 4.0 [0.158] 2.9 [0.114] 1.0 ± 0.50 [0.039 ± 0.020] 7.8/4.6 7.8 [0.307] 4.6 [0.181] 1.0 ± 0.50 [0.039 ± 0.020] 10/6.5 10.0 [0.394] 6.5 [0.256] 1.5 ± 0.50 [0.059 ± 0.020] 15/9.6 15.0 [0.591] 9.6 [0.378] 1.5 ± 0.50 [0.059 ± 0.020] 21/13 21.0 [0.827] 13.0 [0.512] 2.0 ± 0.75 [0.079 ± 0.030] 29/20 29.0 [1.142] 20.0 [0.787] 2.0 ± 0.75 [0.079 ± 0.030] 41/27 41.0 [1.614] 27.0 [1.063] 3.0 ± 1.00 [0.118 ± 0.039] 51/33 51.0 [2.008] 33.0 [1.299] 3.0 ± 1.00 [0.118 ± 0.039] *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Gray (-8) Size selection Always order the largest size that will shrink snugly over the component to be covered. Standard packaging On spools. Ordering description Specify product name, size and color (for example, SRFR 2.9/1.7-8). 1-116 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products SST/SST-FR 1 Self-Sealing, Heat-Shrinkable Tubing Product Facts  Thick adhesive liner forms an effective barrier against fluids and moisture  Thick-wall insulation, strain relief and abrasion protection  No need for greases, tape, or epoxy  Expansion ratios as high as 3:1  Available in flame-retardant material  SST has the following agency approvals: - ABS (American Bureau of Shipping) - Lloyd’s (Lloyd’s Register of Shipping)  RoHS compliant Applications relief. The polymer tubing Installation has excellent insulating, SST provides a simple, Minimum shrink abrasion-resistance, and positive splice-sealing temperature: 90°C [195°F] strain-relief properties. method that offers Minimum full recovery protection under adverse temperature: 121°C [250°F] environmental conditions. Tubing supplied with Operating Temperature Range standard sealant provides water sealing and environ- -55°C to 110°C mental protection in wet or [-67°F to 230°F] underground applications. The thermoplastic adhesive not only seals, but also provides mechanical strain Specifications/Approvals Series Military Industry Agency Raychem SST—— RW-2011 SST-FR AMS-DTL-23053/15*, ASTM D 685, nonburning ABS, Lloyd’s RW-2011 Classes 1 and 2 *Formerly MIL-I-23053/I5 and MIL-DTL-23053/15. Available in: Americas Europe Asia Pacific   1-117 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products SST/SST-FR (Continued) Product Dimensions Inside Diameter Wall Thickness Recommended Standard Minimum Maximum Nominal Wall Cable Size† Nominal Expanded Recovered Expanded After Range for Length as Supplied After Heating Heating†† 600-Volt Cable SST*-03 30**, 48 0.300 0.100 0.025 0.070 18 through 14 AWG SST*-04 30**, 48 0.400 0.150 0.025 0.070 14 through 10 AWG SST*-07 48 0.750 0.220 0.030 0.095 8 through 1 AWG SST*-11 48 1.100 0.375 0.040 0.120 2 through 4/0 AWG SST*-13 48 1.300 0.375 0.035 0.120 2 through 4/0 AWG SST*-15 48 1.500 0.500 0.050 0.140 2/0 AWG through 500 MCM SST*-17 48 1.700 0.500 0.045 0.140 2/0 AWG through 500 MCM SST*-20 48 2.000 0.750 0.050 0.160 350 MCM through 1000 MCM SST*-27 48 2.700 0.900 0.050 0.160 500 MCM through 1250 MCM SST*-30 48 3.000 1.250 0.050 0.160 900 MCM through 1500 MCM SST*-40 48 4.000 1.750 0.050 0.160 1500 MCM through 2500 MCM SST*-45 48 4.500 1.750 0.050 0.160 1500 MCM through 2500 MCM †In place of asterisk* substitute length of tubing to be ordered. For example, SST*-11, as the second column indicates, comes in 48-inch lengths, so a 48-inch cut piece of SST tubing would be SST 48-11. ††Wall thickness will be less if tubing recovery is restricted during shrinkage. **30-inch length standard for /226 coating only. Ordering Information Color Standard Black Nonstandard White, Red, Yellow and Clear (Clear is non-flame-retardant) Size selection Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. Standard packaging See Product Dimensions table. Ordering description Specify product name, cut length, size and color (for example, SST 48-07/FR/97). Part Numbering System SST - _ - _ / _ / _ / _ / _ “NM” - no marking Color Black/leave blank (standard) White/WHT Red/RED Yellow/YLW Clear/CL (non-flame retardant) Adhesive/sealant /97 standard with FR /226 standard with Non FR “FR” - flame-retardant Size Length in inches (48 inch max) Family Example: SST-48-07/FR/97/NM 1-118 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products TAT-125 1 Adhesive-Lined, Flexible, Polyolefin Tubing Product Facts  2:1 shrink ratio  Thin adhesive lining that bonds to outer tubing and surface below, forming a positive environmental seal  Flexibility of both tubing and adhesive  Moisture seal that is resistant to bending of the substrate  Good mechanical strength and cut-through resistance  Adhesive that bonds to a wide variety of plastics, rubbers, and metals, including polyethylene, neoprene, lead, and steel  RoHS compliant Applications Installation Operating Temperature Range Seals and protects simple Minimum shrink -55°C to 110°C in-line splices, bimetallic temperature: 95°C [203°F] [-67°F to 230°F] joints, and components Minimum full recovery from fluids, moisture, and temperature: 121°C [250°F] corrosion. Repairs damaged wire insulation, especially where flexibility is required. Provides one- step electrical insulation and moisture sealing. Specifications/Approvals Series UL* Military Raychem TAT-125 Type 1 (colors) E85381 AMS-DTL-23053/4*, Class 2 RW-3032 600 V, 125°C TAT-125 Type 2 (clear) —— RW-3032 *Formerly MIL-I-23053/4 and MIL-DTL-23053/4. Sizes 1/4" through 1 1/2" only. Available in: Americas Europe Asia Pacific  1-119 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products TAT-125 (Continued) Product Dimensions Inside Diameter Recovered Wall Thickness** Minimum Maximum Total Wall Adhesive Wall Size Expanded Recovered After Heating After Heating as Supplied After Heating (Nominal) (Nominal) 1/8 3.2 [0.125] 1.6 [0.062] 0.69 [0.027] 0.23 [0.009] 3/16 4.8 [0.187] 2.4 [0.093] 0.71 [0.028] 0.25 [0.010] 1/4 6.4 [0.250] 3.2 [0.125] 0.74 [0.029] 0.13 [0.005] 3/8 9.5 [0.375] 4.8 [0.187] 0.74 [0.029] 0.13 [0.005] 1/2 12.7 [0.500] 6.4 [0.250] 0.76 [0.030] 0.15 [0.006] 3/4 19.1 [0.750] 9.5 [0.375] 0.89 [0.035] 0.15 [0.006] 1 25.4 [1.000] 12.7 [0.500] 1.07 [0.042] 0.20 [0.008] 1 1/2 38.1 [1.500] 19.1 [0.750] 1.19 [0.047] 0.28 [0.011] **Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) Nonstandard White (-9), red (-2), blue (-6), yellow (-4), green (-5), brown (-1), orange (-3), violet (-7), gray (-8), clear (-X , not flame-retardant) Size selection Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. Standard packaging In 1.2-meter [4-foot] lengths. Ordering description Specify product name, size and color (for example, TAT-125 1/4-0). 1-120 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products TC Caps 1 Semirigid, Flame- Retardant Polyolefin Caps Product Facts  2.5:1 shrink ratio  Flame-retardant  Permanent or temporary method to terminate wires  Rapid, simple installation  Rugged protection against abrasion, vibration, and flexing  RoHS compliant Applications Installation Operating Temperature Range Widely used for wire termi- Minimum shrink -55°C to 135°C nations because of their temperature: 110°C [230°F] [-67°F to 275°F] light weight, small size and Minimum full recovery durability. Vibration-proof temperature: 135°C [275°F] caps are used to insulate and terminate dead-end electrical cables, fixtures, connectors, and other elec- trical equipment. Also used to protect the ends of wire during storage. Specifications/Approvals Series UL Raychem TC Caps E85381 TC Caps SCD 600 V, 125°C Available in: Americas Europe Asia Pacific   1-121 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products TC Caps (Continued) Product Dimensions Color Length Inside Diameter Recovered Wall Thickness** After Heating Nominal Minimum Open Minimum Maximum Size Overall as Barrel after Expanded Recovered Supplied Recovery* as Supplied After Heating TC 4001 White (-9) 19.1 (0.750) 10.2 (0.400) 1.6 (0.063) 0.8 (0.030) 0.51 ± 0.12 (0.020 ± 0.005) TC 4003 Red (-2) 25.4 (1.000) 14.0 (0.550) 3.2 (0.125) 1.3 (0.050) 0.64 ± 0.12 (0.025 ± 0.005) TC 4005 Gray (-8) 28.6 (1.125) 14.0 (0.550) 6.4 (0.250) 2.5 (0.100) 0.69 ± 0.12 (0.027 ± 0.005) *See glossary for definition of “barrel”. **Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard One color per size per the Product Dimensions table. Size selection Always order the largest size that will shrink snugly over the component to be covered. Standard packaging In pieces. Ordering description Specify product name, size and color (for example, TC-CAPS-4003-2). 1-122 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products TFE and TFER 1 High-Temperature, Chemically Inert, Modified Tubing made of PTFE Product Facts  Shrink ratio: 1.8:1 (TFE) 3.2:1 (TFER)  High flame-resistance  Excellent chemical resistance  RoHS compliant Applications Installation Operating Temperature Range Designed to provide Minimum shrink -67°C to 250°C insulation and mechanical temperature: 330°C [625°F] [-88.6°F to 482°F] protection in severe Minimum full recovery chemical and thermal temperature: 340°C [644°F] environments. Used to cover hydraulic hose and couplings to prevent contamination and corrosion. The high mechanical strength and extremely low coefficient of friction make it good for reducing damage to bearing shafts and similar applications. Specifications/Approvals Series Military Raychem TFE, TFER AMS-DTL-23053/12*, Classes 3 and 5 RW-2055 (TFE) Def. Stan. 59-97 Type 5A (TFE) RW-2054 (TFER) Def. Stan. 59-97 Type 5B (TFER) *Formerly MIL-I-23053/12 and MIL-DTL-23053/12. Available in: Americas Europe Asia Pacific  1-123 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products TFE and TFER (Continued) Product Dimensions Inside Diameter Wall Thickness** Size Minimum Expanded Maximum Recovered Nominal Recovered TFE as Supplied After Heating After Heating 30 0.8 [0.032] 0.38 [0.015] 0.23 [0.009] 28 0.9 [0.035] 0.46 [0.018] 0.23 [0.009] 26 1.1 [0.043] 0.56 [0.022] 0.25 [0.010] 24 1.2 [0.047] 0.68 [0.027] 0.25 [0.010] 22 1.4 [0.055] 0.81 [0.032] 0.30 [0.012] 20 1.5 [0.059] 0.99 [0.039] 0.30 [0.012] 18 1.9 [0.075] 1.24 [0.049] 0.30 [0.012] 16 2.3 [0.091] 1.55 [0.061] 0.30 [0.012] 14 3.0 [0.118] 1.83 [0.072] 0.30 [0.012] 12 3.8 [0.150] 2.26 [0.089] 0.30 [0.012] 10 4.8 [0.189] 2.84 [0.112] 0.30 [0.012] 8 6.1 [0.240] 3.58 [0.141] 0.38 [0.015] 6 7.6 [0.299] 4.52 [0.178] 0.38 [0.015] 4 9.4 [0.370] 5.69 [0.224] 0.38 [0.015] 2 10.9 [0.429] 7.06 [0.278] 0.38 [0.015] 0 11.9 [0.469] 8.81 [0.347] 0.38 [0.015] **Wall thickness will be less if tubing recovery is restricted during shrinkage. TFER Inside Diameter Wall Thickness** Size Minimum Expanded Maximum Recovered Nominal Recovered as Supplied After Heating After Heating 5/64 2.0 [0.079] 0.6 [0.024] 0.23 [0.009] 1/8 3.2 [0.126] 1.0 [0.039] 0.25 [0.010] 1/4 6.4 [0.252] 1.6 [0.063] 0.30 [0.012] 3/8 9.5 [0.374] 2.4 [0.095] 0.30 [0.012] 1/2 12.7 [0.500] 3.7 [0.146] 0.38 [0.015] 5/8 15.9 [0.626] 4.5 [0.177] 0.38 [0.015] 3/4 19.0 [0.748] 5.7 [0.224] 0.38 [0.015] 1 25.4 [1.000] 7.1 [0.230] 0.38 [0.015] 1-1/4 32.0 [1.260] 8.8 [0.347] 0.38 [0.015] **Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Clear (-X) Size selection Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. Standard packaging In 1.2-meter [4-foot] lengths. Ordering description*** Specify product name, size and color (for example,TFE 22-X). ***Europe only. For supply to MIL spec., Def Stan and BS add -MS, -DS or -BS to ordering description. 1-124 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products Tubing Kits and Mini-Spools 1 Smaller Packaging Options for Single Wall and Adhesive-Lined Tubing Products Product Facts  VERSAFIT and RNF-100 tubing: 2:1 shrink ratio  DWP-125: 3:1 shrink ratio  ES1000: 4:1 shrink ratio  VERSAFIT tubing’s low full recovery temperature reduces installation time and the risk of damage to temperature-sensitive components  RNF-100 offers excellent physical, chemical, and electrical properties that meet or exceed commercial, industrial and military standards for highly reliable, general purpose tubing  DWP-125 and ES1000 have Applications wide variety of electrical Operating Temperature Range high-shrink-ratios to allow applications, including wire for insulation and sealing of Single wall VERSAFIT and VERSAFIT and RNF-100: splices, terminations, break- irregular shapes; few sizes RNF-100 tubing provide -55°C to 135°C outs and connector-to- cover a wide range of electrical insulation and [-67°F to 275°F] cable transitions. diameters strain relief of in-line com- DWP-125:  RoHS compliant ponents, electrical connec- -40°C to 110°C Installation tions, wire terminations, and [-40°F to 230°F] splices. They can be used Minimum full recovery ES1000: to bundle wires for flexible temperature: -40°C to 130°C light duty harnesses. Also VERSAFIT: 90°C [194°F] [-40°F to 266°F] to identify or color code wires, cables, terminals and RNF-100: 121°C [250°F] electronic components. DWP-125: 125°C [257°F] Adhesive-lined DWP-125 ES1000: 135°C [275°F] and ES1000 environmen- tally seal and protect a Specifications/Approvals ® Series UL CSA Raychem VERSAFIT E35586 VW-1 LR31929 VW-1 RW-3009 600 V, 125°C 600 V, 125°C RNF-100 E35586 LR31929 RT-350 600 V, 125°C 600 V, 125°C DWP-125 E35586 DWP-125 SCD — 600 V, 125°C ES1000 E85381 RT-1113 — 600 V, 125°C Available in: Americas Europe Asia Pacific  1-125 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products Tubing Kits and Mini-Spools (Continued) Single Wall Tubing Expanded I.D. Quantity (6 Inch Pieces) Fits Wire Gauge Size Refill Part Number VERSAFIT-3/16” 30 18 – 14 AWG D76139-000 KIT 1 – 2 to 1 Shrink Ratio • VERSAFIT-1/4” 28 12 – 10 AWG F37063-000 Black • 600V, 125°C, VERSAFIT-3/8” 24 8 AWG D27573-000 UL/CSA VW-1 VERSAFIT-1/2” 20 6 –3 AWG C02462-000 (KIT 1 PN: A55251-000) VERSAFIT-3/4” 14 2 – 1/0 AWG A92664-000 VERSAFIT-1” 10 2/0 – 4/0 AWG C21270-000 KIT 2 – 2 to 1 Shrink Ratio • Expanded I.D. Quantity (6 Inch Pieces) Fits Wire Gauge Size Refill Part Number 7 Colors** • 600V, 125°C, VERSAFIT-3/32” 35 18 AWG E31091-000 UL/CSA VW-1 (except clear) VERSAFIT-1/8” 28 16 AWG 349256-000 VERSAFIT-3/16” 21 14 AWG C53800-000 (KIT 2 PN: D54859-000) VERSAFIT-1/4” 21 12 – 10 AWG C87605-000 VERSAFIT-3/8” 14 8 AWG A82691-000 VERSAFIT-1/2” 14 6 – 3 AWG E10896-000 **Clear tubing in Kit 2 and Kit 2 Refills is RNF-100. Adhesive-Lined Tubing Expanded I.D. Quantity (6 Inch Pieces) Fits Wire Gauge Size Refill Part Number DWP-125-1/8” 25 20 – 16 AWG (3 to 1 Shrink Ratio) D14889-000 KIT 3 – Black/White/Red/Clear DWP-125-3/16” 25 14 –10 AWG (3 to 1 Shrink Ratio) E87367-000 • 600V, 125°C, UL DWP-125-1/4” 24 12 –10 AWG (3 to 1 Shrink Ratio) F91864-000 (KIT 3 PN: E42160-000) DWP-125-1/2” 10 6 –3 AWG (3 to 1 Shrink Ratio) F41454-000 DWP-125-3/4” 5 2 – 1/0 AWG (3 to 1 Shrink Ratio) C67617-000 DWP-125-1” 3 2/0 – 4/0 AWG (3 to 1 Shrink Ratio) F66623-000 ES1000-NO.1 6 16 – 12 AWG (4 to 1 Shrink Ratio) ES1000-NO.2 5 12 – 10 AWG (4 to 1 Shrink Ratio) ES1000-NO.3 5 10 – 8 AWG (4 to 1 Shrink Ratio) ES1000-NO.4 3 6 –3 AWG (4 to 1 Shrink Ratio) KITS 1, 2 and 3 are comprised of a durable six section plastic box with hinged lid. Inside the lid are product selection guidelines. Ask your Sales Representative about KIT 4 and KIT 6, our Economy Tubing Kits in a reclosable plastic bag, also used on “point of sale” racks. Here are Part Numbers for those Kits and their content: KIT 4: E32151-000 (Three pieces each of 3/16”, 1/4”, 3/8”, 1/2”, 3/4” and 1” Black tubing in 6 inch pieces) KIT 6: C72402-000 (Three pieces each of 3/64”, 1/16”, 3/32” and 1/8” Black tubing in 6 inch pieces) VERSAFIT MINI-SPOOLS Expanded I.D. Quantity (Feet) Part Number VERSAFIT-3/64” 100 C16404-000 2 to 1 Shrink Ratio • Black • VERSAFIT-1/16” 75 E40870-000 600V, 125°C, UL/CSA VW-1 VERSAFIT-3/32 65 D70981-000 VERSAFIT-1/8” 60 C17600-000 VERSAFIT-3/16” 50 F27135-000 VERSAFIT-1/4” 40 F64479-000 VERSAFIT-3/8” 35 D57591-000 VERSAFIT-1/2” 30 E37316-000 VERSAFIT-3/4” 25 449582-000 VERSAFIT-1” 15 F27156-000 VERSAFIT is a very flexible, highly flame-retardant polyolefin tubing, 90°C full recovery temperature, good fluid resistance with a UL 224/CSA VW-1 flammability rating. RNF-100 MINI-SPOOLS Expanded I.D. Quantity (Feet) Part Number RNF-100-3/64” 100 D00409-000 2 to 1 Shrink Ratio • Black • RNF-100-1/16” 75 A66551-000 600V, 125°C, UL/CSA RNF-100-3/32 65 D42391-000 RNF-100-1/8” 60 F56629-000 RNF-100-3/16” 50 E77288-000 RNF-100-1/4” 40 F75818-000 RNF-100-3/8” 35 D12330-000 RNF-100-1/2” 30 A81736-000 RNF-100-3/4” 25 E40866-000 RNF-100-1” 15 E62131-000 RNF-100 is a flexible, flame-retardant polyolefin tubing, 121°C full recovery temperature, excellent fluid resistance with a UL 224/CSA All Tubing flammability rating. 1-126 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products TUGA-GP 1 Shiny, Non-Flame- Retardant, Polyolefin Tubing Product Facts  2:1 shrink ratio  Can be easily hot-stamped  Bright, shiny surface  Semiflexible, non-flame- retardant, halogen-free  Conforms to substrates more uniformly and with less longitudinal change than most PVC-based materials  RoHS compliant Applications Installation Operating Temperature Range -55°C to 125°C TUGA-GP is a commercial Minimum shrink [-67°F to 257°F] grade tubing for general temperature: 85°C [85°F] applications where a Minimum full recovery flame-retardant product is temperature: not needed but where 110°C [230°F] electrical insulation and mechanical performance are important. TUGA-GP makes an attractive cover- ing for many automotive, appliance, and consumer- goods applications. Specifications/Approvals Series Raychem TUGA-GP RW-2201 Available in: Americas Europe Asia Pacific  1-127 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products TUGA-GP (Continued) Product Dimensions Inside Diameter Wall Thickness* Size Minimum Expanded Maximum Recovered Nominal as Supplied After Heating After Heating 1.2/0.6 1.2 [0.046] 0.6 [0.023] 0.4 [0.016] 1.6/0.8 1.6 [0.062] 0.8 [0.031] 0.4 [0.016] 2.4/1.2 2.4 [0.093] 1.2 [0.046] 0.5 [0.019] 3/1.5 3.0 [0.118] 1.5 [0.059] 0.5 [0.019] 5/2.5 5.0 [0.197] 2.5 [0.098] 0.5 [0.019] 6.4/32 6.4 [0.250] 3.2 [0.125] 0.6 [0.024] 8/4 8.0 [0.315] 4.0 [0.157] 0.6 [0.024] 9.5/4.8 9.5 [0.375] 4.8 [0.187] 0.6 [0.024] 11/5.5 11.0 [0.433] 5.5 [0.217] 0.6 [0.024] 12.7/6.4 12.7 [0.500] 6.4 [0.250] 0.6 [0.024] 15/7.5 15.0 [0.591] 7.5 [0.295] 0.8 [0.031] 20/10 20.0 [0.787] 10.0 [0.394] 0.8 [0.031] 25.4/12.7 25.4 [1.000] 12.7 [0.500] 0.9 [0.035] 38/19 38.0 [1.496] 19.0 [0.748] 1.0 [0.039] *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) Size selection Always order the largest size that will shrink snugly over the component to be covered. Special order sizes available upon request. Standard packaging On spools. Ordering description Specify product name, size and color (for example, TUGA 3/1.5-0). 1-128 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products URHT 1 Ultra-High-Ratio, Flame- Retardant, Polyolefin Heat- Shrinkable Tubing Product Facts  Shrink ratios as high as 8:1  Specially formulated for thick wall insulation, strain relief and abrasion protection  Flame-retardant passing ASTM D 635  Excellent performance in both hot and cold environments  Optional factory applied adhesive provides watertight environmental sealing in wet and corrosive locations  RoHS compliant Applications simply repair a damaged Installation outer insulation of a cable Ultra-high-shrink-ratio, heat- Minimum shrink or wire. shrinkable tubing, with temperature: 135°C [275°F] URHT tubing is available expansion ratios as high as Minimum full recovery with or without a hot melt 8-to-1, is designed to con- temperature: 150°C [302°F] adhesive lining. form to odd shapes and shrink over large transitions, Operating Temperature Range allowing for the repair and sealing of cable connectors -55°C to 135°C and equipment. Cable [-67°F to 275°F] harnesses can be repaired and released without disassembly. This product can be used to seal the back end of a connector or Specifications/Approvals Series Military Raychem URHT SAE-AS81765/1, Type II* URHT SCD *heat-shrinkable, crosslinked, flexible polyolefin Available in: Americas Europe Asia Pacific   1-129 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products URHT (Continued) Product Dimensions Inside Diameter Wall Thickness Minimum Maximum Nominal Unrestricted Full Size Expanded Recovered Recovered Recovered Length as Supplied After Heating After Heating ± 6.35 (.250) URHT-200 50.80 (2.000) 5.84 (0.230) 3.56 (0.140) 7.62, 101.60, 152.40, 254.00 (3, 4, 6, 10) URHT-300 76.20 (3.000) 8.64 (0.340) 3.56 (0.140) 7.62, 101.60, 152.40, 254.00 (3, 4, 6, 10) Ordering Information Color Standard Black (-0) Size selection Always order the largest size that will shrink snugly over the component to be covered. Standard packaging In pieces. Ordering description Specify product name, size, cut length and color (for example, URHT-200-10-0). Part Numbering System URHT - _ / _ / _ 42 = Std Adhesive 86 = High Performance Adhesive Unrestricted recovered length Expanded inside diameter - as supplied 1-130 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products Versafit 1 Highly Flame-Retardant, Very Flexible, Low-Shrink- Temperature, Polyolefin Tubing Product Facts  2:1 shrink ratio  Low shrink temperature reduces installation time and the risk of damage to temperature-sensitive components  Very flexible; doesn’t easily wrinkle when bent  Highly flame-retardant  Hot stamps extremely well  Higher temperature rating, better thermal stability, and higher resistance to physical abuse than noncrosslinked materials  Free of polybrominated biphenyls (PBBs) and polybrominated biphenyl oxides and ethers (PBBOs Applications Installation Operating Temperature Range and PBBEs), which are classified as environmentally Cost-effective choice for Minimum shrink -55°C to 135°C hazardous substances many commercial and temperature: 70°C [158°F] [-67°F to 275°F] military applications;  RoHS compliant Minimum full recovery electrically insulates temperature: 90°C [194°F] and protects in-line components, disconnect terminals, and splices. Bundles wires for very flexible light-duty harnesses. Strain-relieves electrical wire connections for commercial applica- tions. Identifies or color- codes wires, cables, terminals, and components. Specifications/Approvals ® Series UL CSA Military Raychem Versafit E35586 VW-1 LR31929 VW-1 AMS-DTL-23053/5* RW-3009 600 V, 125°C 600 V, 125°C Classes 1 & 3 *Formerly MIL-I-23053/5 and MIL-DTL-23053/5. Available in: Americas Europe Asia Pacific   1-131 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products Versafit (Continued) Product Dimensions Inside Diameter Recovered Wall Thickness** Size Expanded Maximum Recovered After Heating as Supplied After Heating 3/64 1.63 ± 0.2 [0.064 ± 0.008] 0.6 [0.023] 0.40 ± 0.08 [0.016 ± 0.003] 1/16 1.85 ± 0.2 [0.073 ± 0.008] 0.8 [0.031] 0.43 ± 0.08 [0.017 ± 0.003] 3/32 2.79 ± 0.2 [0.110 ± 0.008] 1.2 [0.046] 0.51 ± 0.08 [0.020 ± 0.003] 1/8 3.43 ± 0.2 [0.135 ± 0.008] 1.6 [0.062] 0.51 ± 0.08 [0.020 ± 0.003] 3/16 5.21 ± 0.3 [0.205 ± 0.010] 2.4 [0.093] 0.51 ± 0.08 [0.020 ± 0.003] 1/4 7.11 ± 0.3 [0.280 ± 0.010] 3.2 [0.125] 0.64 ± 0.08 [0.025 ± 0.003] 3/8 10.16 ± 0.4 [0.400 ± 0.015] 4.8 [0.187] 0.64 ± 0.08 [0.025 ± 0.003] 1/2 13.72 ± 0.4 [0.540 ± 0.015] 6.4 [0.250] 0.64 ± 0.08 [0.025 ± 0.003] 5/8*** 16.90 ± 0.4 [0.665 ± 0.015] 8.0 [0.315] 0.76 ± 0.08 [0.030 ± 0.003] 3/4 20.45 ± 0.4 [0.805 ± 0.015] 9.5 [0.375] 0.76 ± 0.08 [0.030 ± 0.003] 1 26.80 ± 0.4 [1.055 ± 0.015] 12.7 [0.500] 0.89 ± 0.12 [0.035 ± 0.005] 1 1/4*** 33.40 ± 0.7 [1.315 ± 0.025] 15.9 [0.625] 1.02 ± 0.15 [0.040 ± 0.006] 1 1/2 39.88 ± 0.8 [1.570 ± 0.030] 19.1 [0.750] 1.02 ± 0.15 [0.040 ± 0.006] 2 52.83 ± 1.0 [2.080 ± 0.040] 25.4 [1.000] 1.14 ± 0.16 [0.045 ± 0.007] 3 78.49 ± 1.0 [3.090 ± 0.040] 38.1 [1.500] 1.27 ± 0.20 [0.050 ± 0.008] 4 104.14 ± 1.3 [4.100 ± 0.050] 50.8 [2.000] 1.40 ± 0.23 [0.055 ± 0.009] **Wall thickness will be less if tubing recovery is restricted during shrinkage. ***Nonstandard size; available by special order only. Ordering Information Color Standard Black (-0), white (-9), red (-2), blue (-6), yellow (-4) Nonstandard Brown (-1), orange (-3), green (-5), violet (-7), gray (-8) Size selection Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. Standard packaging**** On spools. Ordering description***** Specify product name, size and color (for example, Versafit 1/4-0). ****Available in the convenient Mini-Spool packaging/dispensing system, for sizes 3/64” up to 1” (black only). *****Europe only. For supply to MIL, Def Stan and BS add -MS, -DS or -BS to ordering description. 1-132 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products Versafit-3X 1 Very Flexible, High-Shrink- Ratio, Highly Flame- Retardant, Low-Shrink- Temperature, Polyolefin Tubing Product Facts  Highly flame-retardant  3:1 shrink ratio easily accommodates irregular shapes; few sizes cover a wide range of diameters  Low shrink temperature reduces installation time and the risk of damage to temperature-sensitive components  Free of polybrominated biphenyls (PBBs) and polybrominated biphenyl oxides and ethers (PBBOs and PBBEs) which are classified as environmentally hazardous substances  RoHS compliant Applications Installation Operating Temperature Range Provides electrical insula- Minimum shrink -55°C to 135°C tion and strain relief of temperature: 70°C [158°F] [-67°F to 275°F] in-line components, Minimum full recovery electrical connections, wire temperature: 90°C [194°F] terminations, and splices. Bundles wires for flexible light duty harnesses. Identifies or color codes wires, cables, terminals and electrical and electronic components. Specifications/Approvals ® Series UL CSA Raychem Versafit-3X E35586 VW-1 LR31929 VW-1 RW-3009 600 V, 125°C 600 V, 125°C Available in: Americas Europe Asia Pacific   1-133 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products Versafit-3X (Continued) Product Dimensions Inside Diameter Recovered Wall Thickness* Size Minimum Expanded Maximum Recovered After as Supplied After Heating Heating 1/8 3.2 (0.125) 1.1 (0.042) 0.58 ± 0.08 (0.023 ± 0.003) 1/4 6.4 (0.250) 2.2 (0.083) 0.58 ± 0.08 (0.023 ± 0.003) 3/8 9.5 (0.375) 3.2 (0.125) 0.61 ± 0.08 (0.024 ± 0.003) 1/2 12.7 (0.500) 4.3 (0.166) 0.61 ± 0.08 (0.024 ± 0.003) 3/4 19.1 (0.750) 6.4 (0.250) 0.61 ± 0.08 (0.024 ± 0.003) 1 25.4 (1.000) 8.5 (0.333) 0.64 ± 0.08 (0.025 ± 0.003) *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) Nonstandard White (-9), red (-2), blue (-6), yellow (-4), green (-5), brown (-1), orange (-3), violet (-7), gray (-8) Size selection Always order the largest size that will shrink snugly over the component to be covered. Standard packaging On spools. Ordering description Specify product name, size and color (for example, Versafit-3X-1/4-0). 1-134 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products Versafit V2 1 Highly Flame-Retardant, Very Flexible, Low-Shrink- Temperature, Polyolefin Tubing Product Facts  2:1 shrink ratio  Low shrink temperature reduces installation time and the risk of damage to temperature-sensitive components  Very flexible; doesn’t easily wrinkle when bent  Highly flame-retardant  Hot stamps extremely well  Higher temperature rating, better thermal stability, and higher resistance to physical abuse than noncrosslinked materials  Free of polybrominated biphenyls (PBBs) and polybrominated biphenyl oxides and ethers (PBBOs Applications Installation Operating Temperature Range and PBBEs), which are classified as environmentally Cost-effective choice Minimum shrink -30°C to 125°C hazardous substances for many commercial temperature: 70°C [158°F] [-22°F to 257°F] applications; electrically  RoHS compliant Minimum full recovery insulates and protects temperature: 90°C [194°F] in-line components, disconnect terminals, and splices. Bundles wires for very flexible light-duty harnesses. Strain-relieves electrical wire connections. Identifies or color-codes wires, cables, terminals, and components. Specifications/Approvals ® Series UL CSA Raychem Versafit V2 E35586 VW-1 LR31929 VW-1 RW-3023 600 V, 125°C 600 V, 125°C Available in: Americas Europe Asia Pacific   1-135 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products Versafit V2 (Continued) Product Dimensions Inside Diameter Wall Thickness Expanded Maximum Expanded as Recovered* Size as Supplied Recovered Supplied After Heating After Heating (Nominal) (Minimum) 1.0 1.5 ± 0.2 [0.059 ± 0.008] 0.50 [0.020] 0.20 [0.008] 0.33 [0.013] 1.5 2.1 ± 0.2 [0.075 ± 0.008] 0.75 [0.030] 0.20 [0.008] 0.35 [0.014] 2.0 2.6 ± 0.2 [0.102 ± 0.008] 1.00 [0.039] 0.25 [0.010] 0.43 [0.017] 2.5 3.1 ± 0.2 [0.122 ± 0.008] 1.25 [0.049] 0.25 [0.010] 0.43 [0.017] 3.0 3.6 ± 0.2 [0.142 ± 0.008] 1.50 [0.059] 0.25 [0.010] 0.43 [0.017] 3.5 4.1 ± 0.3 [0.161 ± 0.012] 1.75 [0.069] 0.25 [0.010] 0.43 [0.017] 4.0 4.6 ± 0.3 [0.181 ± 0.012] 2.00 [0.079] 0.25 [0.010] 0.43 [0.017] 5.0 5.6 ± 0.3 [0.221 ± 0.012] 2.50 [0.098] 0.30 [0.012] 0.56 [0.022] 6.0 6.6 ± 0.3 [0.260 ± 0.012] 3.00 [0.118] 0.30 [0.012] 0.56 [0.022] 7.0 7.6 ± 0.3 [0.299 ± 0.012] 3.50 [0.138] 0.30 [0.012] 0.56 [0.022] 8.0 8.6 ± 0.3 [0.339 ± 0.012] 4.00 [0.158] 0.30 [0.012] 0.56 [0.022] 9.0 9.6 ± 0.3 [0.378 ± 0.012] 4.50 [0.177] 0.30 [0.012] 0.56 [0.022] 10.0 10.4 ± 0.3 [0.409 ± 0.012] 5.00 [0.197] 0.30 [0.012] 0.56 [0.022] 11.0 11.4 ± 0.3 [0.449 ± 0.012] 5.50 [0.217] 0.30 [0.012] 0.56 [0.022] 12.0 12.7 ± 0.3 [0.500 ± 0.012] 6.00 [0.236] 0.30 [0.012] 0.56 [0.022] 13.0 13.5 ± 0.3 [0.532 ± 0.012] 6.50 [0.256] 0.35 [0.014] 0.66 [0.026] 14.0 14.4 ± 0.4 [0.567 ± 0.016] 7.00 [0.276] 0.35 [0.014] 0.68 [0.027] 15.0 15.7 ± 0.4 [0.618 ± 0.016] 7.50 [0.295] 0.35 [0.014] 0.68 [0.027] 16.0 16.9 ± 0.4 [0.665 ± 0.016] 8.00 [0.315] 0.35 [0.014] 0.68 [0.027] 18.0 19.0 ± 0.4 [0.748 ± 0.016] 9.00 [0.354] 0.40 [0.016] 0.76 [0.030] 20.0 21.4 ± 0.4 [0.843 ± 0.016] 10.00 [0.394] 0.40 [0.016] 0.76 [0.030] 22.0 23.2 ± 0.4 [0.913 ± 0.016] 11.00 [0.433] 0.45 [0.018] 0.89 [0.035] 25.0 26.8 ± 0.4 [1.055 ± 0.016] 12.50 [0.492] 0.45 [0.018] 0.89 [0.035] 27.0 28.2 ± 0.5 [1.110 ± 0.020] 12.50 [0.492] 0.45 [0.018] 0.89 [0.035] 28.0 30.0 ± 0.5 [1.181 ± 0.020] 14.00 [0.551] 0.45 [0.018] 0.89 [0.035] 30.0 32.1 ± 0.5 [1.264 ± 0.020] 15.00 [0.591] 0.45 [0.018] 0.89 [0.035] *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) Nonstandard White (-9), red (-2), blue (-6), yellow (-4), green (-5), orange (-3), violet (-7), brown (-1), gray (-8) Size selection Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. Standard packaging On spools. Ordering description Specify product name, size and color (for example, V2-3.0-0). 1-136 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products Versafit V4 1 Very-Thin-Wall, Very Flexible, Highly Flame-Retardant, Polyolefin Tubing Product Facts  2:1 shrink ratio  Very thin wall provides space savings and rapid shrinking  Low shrink temperature further reduces installation time and risk of damage to temperature-sensitive components  Very flexible; doesn’t easily wrinkle when bent  Free of polybrominated biphenyls (PBBs) and polybrominated biphenyl oxides and ethers (PBBOs and PBBEs), which are classified as environmentally hazardous substances Applications Installation Operating Temperature Range  RoHS compliant Typically used where Minimum shrink -30°C to 125°C space saving is important. temperature: 70°C [158°F] [-22°F to 257°F] Offers the ability to pack Minimum full recovery components more closely temperature: 90°C [194°F] than is possible with standard tubings. Cost- effective choice for many commercial applications; electrically insulates and protects in-line compo- nents, disconnect terminals, and splices. Used for strain relief on high-density connectors. Specifications/Approvals ® Series UL CSA Raychem Versafit V4 E85381 VW-1 LR31929 VW-1 RW-3023 300 V, 125°C 150 V, 125°C Available in: Americas Europe Asia Pacific   1-137 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products Versafit V4 (Continued) Product Dimensions Inside Diameter Wall Thickness Expanded Maximum Expanded as Recovered* Size as Supplied Recovered Supplied After Heating After Heating (Nominal) (Minimum) 0.6 0.95 ± 0.25 [0.037 ± 0.010] 0.30 [0.012] 0.10 [0.004] 0.25 [0.010] 0.8 1.20 ± 0.25 [0.047 ± 0.010] 0.40 [0.016] 0.10 [0.004] 0.25 [0.010] 1.0 1.40 ± 0.25 [0.055 ± 0.010] 0.50 [0.020] 0.10 [0.004] 0.25 [0.010] 1.5 1.90 ± 0.25 [0.075 ± 0.010] 0.75 [0.030] 0.10 [0.004] 0.25 [0.010] 2.0 2.30 ± 0.25 [0.091 ± 0.010] 1.00 [0.039] 0.10 [0.004] 0.25 [0.010] 2.5 2.80 ± 0.25 [0.110 ± 0.010] 1.25 [0.049] 0.15 [0.006] 0.25 [0.010] 3.0 3.30 ± 0.25 [0.130 ± 0.010] 1.50 [0.059] 0.15 [0.006] 0.25 [0.010] 3.5 3.80 ± 0.25 [0.150 ± 0.010] 1.75 [0.069] 0.15 [0.006] 0.25 [0.010] 4.0 4.40 ± 0.25 [0.173 ± 0.010] 2.00 [0.079] 0.15 [0.006] 0.25 [0.010] 5.0 5.50 ± 0.25 [0.217 ± 0.010] 2.50 [0.098] 0.15 [0.006] 0.25 [0.010] 6.0 6.50 ± 0.40 [0.256 ± 0.016] 3.00 [0.118] 0.15 [0.006] 0.28 [0.011] 7.0 7.50 ± 0.40 [0.295 ± 0.016] 3.50 [0.138] 0.15 [0.006] 0.28 [0.011] 8.0 8.50 ± 0.40 [0.335 ± 0.016] 4.00 [0.158] 0.15 [0.006] 0.28 [0.011] 9.0 9.50 ± 0.40 [0.374 ± 0.016] 4.50 [0.177] 0.15 [0.006] 0.28 [0.011] 10.0 10.50 ± 0.50 [0.413 ± 0.020] 5.00 [0.197] 0.15 [0.006] 0.28 [0.011] Inside Diameter Recovered Wall Thickness* Inch Minimum Expanded Maximum Recovered After Size as Supplied After Heating Heating 3/64 1.2 [0.046] 0.6 [0.023] 0.30 ± 0.05 [0.012 ± 0.002] 1/16 1.6 [0.062] 0.8 [0.031] 0.30 ± 0.05 [0.012 ± 0.002] 3/32 2.4 [0.093] 1.2 [0.046] 0.30 ± 0.05 [0.012 ± 0.002] 1/8 3.2 [0.125] 1.6 [0.062] 0.33 ± 0.05 [0.013 ± 0.002] 3/16 4.8 [0.187] 2.4 [0.093] 0.33 ± 0.05 [0.013 ± 0.002] 1/4 6.4 [0.250] 3.2 [0.125] 0.36 ± 0.08 [0.014 ± 0.003] 3/8 9.5 [0.375] 4.8 [0.187] 0.36 ± 0.08 [0.014 ± 0.003] 1/2 12.7 [0.500] 6.4 [0.250] 0.36 ± 0.08 [0.014 ± 0.003] 3/4 19.1 [0.750] 9.5 [0.375] 0.43 ± 0.08 [0.017 ± 0.003] 1 25.4 [1.000] 12.7 [0.500] 0.51 ± 0.08 [0.020 ± 0.003] *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) Nonstandard Other colors available upon request. Size selection Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. Standard packaging On spools. Marking Marked with UL/CSA/-F- legends (metric sizes) or unmarked (inch sizes). Ordering description Specify product name, size (mm or in.) and color (for example, V4-1.0-0). 1-138 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products Versaflex 1 Expandable, Braided, Polyester Sleeving Product Facts  Excellent abrasion and cut- through resistance  Lightweight  Flexible (even at low temperatures)  Fungus proof  Not affected by most chemical and solvents, non-hygroscopic  Versaflex-FR sleeving meets UL VW-1 and is self- extinguishing  Wide range of sizes available  RoHS compliant Applications means for wire bundling Installation that will not trap heat or Versaflex sleeving is suited This product is cold moisture; expanding easily for the mechanical protec- applied. to fit over irregular shapes, tion of wire harnesses, then contracting to conform hoses, and all other appli- and grip. To prevent Operating Temperature Range cations where exceptional fraying, these products flexibility combined with -50°C to 150°C should be cut to length superior abrasion/cut resist- [-58°F to 302°F] using a hot knife. ance is required. It also (220°C [-58°F to 302°F] for serves as an economical short periods) Specifications/Approvals Series UL Raychem Versaflex-FR E306976 VW-1, 125°C Versaflex — RK-6772 Available in: Americas Europe Asia Pacific  1-139 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products Versaflex (Continued) Product Dimensions Versaflex (metric) Nominal Size Size Range Minimum Maximum 3 (0.118) 1 (0.039) 5 (0.197) 4 (0.158) 2 (0.079) 7 (0.276) 5 (0.197) 3 (0.118) 9 (0.354) 6 (0.236) 4 (0.158) 12 (0.472) 8 (0.315) 5 (0.197) 12 (0.472) 10 (0.394) 7 (0.276) 15 (0.591) 12 (0.472) 8 (0.315) 17 (0.669) 15 (0.591) 10 (0.394) 20 (0.787) 20 (0.787) 14 (0.551) 26 (1.024) 25 (0.984) 18 (0.709) 34 (1.339) 30 (1.181) 20 (0.787) 40 (1.575) 40 (1.575) 30 (1.181) 50 (1.969) 50 (1.969) 40 (1.575) 60 (2.362) Versaflex (Imperial) Size Nominal Size Size Range 1/8 3 (0.118) 2.4 – 6.4 (0.094 – 0.252) 1/4 6 (0.236) 3.2 – 9.5 (0.125 – 0.375) 3/8 10 (0.394) 4.7 – 16 (0.185 – 0.630) 1/2 13 (0.512) 6.4 – 19 (0.252 – 0.748) 3/4 19 (0.748) 13 – 32 (0.512 – 1.260) 1-1/4 32 (1.256) 19 – 45 (0.748 – 1.772) 1-3/4 45 (1.772) 32 – 70 (1.260 – 2.756) 2 51 (2.008) 38 – 76 (1.496 – 2.992) Versaflex-FR flame retardant, expandable polyester braid Size Nominal Size Size Range 1/8 3 (0.118) 2.4 – 6.4 (0.094 – 0.252) 1/4 6 (0.236) 3.2 – 9.5 (0.125 – 0.375) 3/8 10 (0.394) 4.7 – 16 (0.185 – 0.630) 1/2 13 (0.512) 6.4 – 19 (0.252 – 0.748) 3/4 19 (0.748) 13 – 32 (0.512 – 1.260) 1-1/4 32 (1.256) 19 – 45 (0.748 – 1.772) 1-3/4 45 (1.772) 32 – 70 (1.260 – 2.756) 2 51 (2.008) 38 – 76 (1.496 – 2.992) Ordering Information Color Standard Versaflex (metric) : Black (-0) Grey (-8) Versaflex (imperial) : Black (-0) Versaflex-FR : Black with a white X tracer (-09) Standard packaging On spools. Ordering description Specify product name, size and color (for example, VERSAFLEX-FR-1/4-09-SP) 1-140 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products XFFR 1 Halogen-Free, Flame-Retardant, Heat-Shrinkable Tubing Product Facts  Emits minimal amounts of toxic or acid gasses during combustion  Meets performance requirements of MIL-C-24640 and MIL-C-24643 cable jackets  Resists moisture, fungus, and weathering  Available in expansion ratios as high as 3:1  XFFR has the following approvals: - ABS (American Bureau of Shipping) - Lloyd’s (Lloyd’s Register of Shipping)  RoHS compliant Applications Installation Operating Temperature Range XFFR halogen-free tubing Minimum shrink -55°C to 110°C can be used for rejacketing temperature: 70°C [158°F] [-67°F to 230°F] and repairing halogen-free Minimum full recovery cables in any enclosed area temperature: 121°C [250°F] where a flame-retardant, halogen-free environment is required. These environments include tunnels, buildings, mass transit vehicles, and ships. When installed with S-1305 tape, the tubing can also be used in applica- tions requiring water seal- ing and protection from abrasion and corrosion. Specifications/Approvals Series Military Industry Raychem XFFR MIL-C-24640 NES 713 RW-2016 MIL-C-24643 NES 711 Available in: Americas Europe Asia Pacific   1-141 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products XFFR (Continued) Product Dimensions Inside Diameter Recovered Wall Thickness* Size Minimum Expanded Maximum Recovered After Heating as Supplied After Heating (Nominal) XFFR-03 7.62 [0.300] 2.54 [0.100] 2.03 [0.080] XFFR-04 10.16 [0.400] 3.81 [0.150] 2.03 [0.080] XFFR-07 19.05 [0.750] 5.59 [0.220] 2.03 [0.080] XFFR-11 27.94 [1.100] 9.52 [0.375] 2.67 [0.105] XFFR-15 38.10 [1.500] 12.70 [0.500] 3.05 [0.120] XFFR-20 50.80 [2.000] 19.05 [0.750] 3.05 [0.120] XFFR-30 76.20 [3.000] 31.75 [1.250] 4.06 [0.160] *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) Size selection Always order the largest size that will shrink snugly over the component to be covered. Standard packaging 1.2-meter [4-foot] or 7.5-meter [25-foot] lengths. Part Numbering System XFFR - 03 X 4 / NM “NM” - no mark Length in feet (4 feet standard) Size Family 1-142 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products ZH2 1 Flexible, Highly Flame- Retardant, Low Recovery Temperature, ZEROHAL Polyolefin Tubing Product Facts  2:1 shrink ratio  Highly flame-retardant; UL/CSA VW-1 flammability rating  Environmentally friendly tubing essentially free of halogens  Emits minimal amounts of toxic or acid gasses when burned  RoHS compliant Applications Installation Operating Temperature Range Electrical insulation and Minimum shrink -30°C to 125°C strain relief of connections temperature: 70°C [158°F] [-22°F to 257°F] and terminations in comput- Minimum full recovery ers, appliances, and other temperature: 90°C [194°F] commercial electronic products. Jacketing and bundling of light duty har- nesses in rail and mass transit vehicles, buildings, and other enclosed areas where emission of toxic gasses from burning mate- rials containing halogens is very undesirable. Specifications/Approvals ® Series UL CSA Raychem ZH2 E35586 VW-1 LR31929 VW-1 RW-3036 600 V, 125°C 600 V, 125°C Available in: Americas Europe Asia Pacific   1-143 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products ZH2 (Continued) Product Dimensions Inside Diameter Wall Thickness Expanded Maximum Expanded as Recovered* Size as Supplied Recovered Supplied After Heating After Heating (Nominal) (Minimum) 0.8 1.2 ± 0.2 [0.047 ± 0.008] 0.40 [0.016] 0.20 [0.008] 0.33 [0.013] 1.0 1.5 ± 0.2 [0.059 ± 0.008] 0.50 [0.020] 0.20 [0.008] 0.33 [0.013] 1.5 2.1 ± 0.2 [0.075 ± 0.008] 0.75 [0.030] 0.20 [0.008] 0.34 [0.013] 2.0 2.6 ± 0.2 [0.102 ± 0.008] 1.00 [0.039] 0.25 [0.010] 0.43 [0.017] 2.5 3.1 ± 0.2 [0.122 ± 0.008] 1.25 [0.049] 0.25 [0.010] 0.43 [0.017] 3.0 3.6 ± 0.2 [0.142 ± 0.008] 1.50 [0.059] 0.25 [0.010] 0.43 [0.017] 3.5 4.1 ± 0.3 [0.161 ± 0.012] 1.75 [0.069] 0.25 [0.010] 0.43 [0.017] 4.0 4.6 ± 0.3 [0.181 ± 0.012] 2.00 [0.079] 0.25 [0.010] 0.43 [0.017] 5.0 5.6 ± 0.3 [0.221 ± 0.012] 2.50 [0.098] 0.30 [0.012] 0.56 [0.022] 6.0 6.6 ± 0.3 [0.260 ± 0.012] 3.00 [0.118] 0.30 [0.012] 0.56 [0.022] 7.0 7.6 ± 0.3 [0.299 ± 0.012] 3.50 [0.138] 0.30 [0.012] 0.56 [0.022] 8.0 8.6 ± 0.3 [0.339 ± 0.012] 4.00 [0.158] 0.30 [0.012] 0.56 [0.022] 9.0 9.6 ± 0.3 [0.378 ± 0.012] 4.50 [0.177] 0.30 [0.012] 0.56 [0.022] 10.0 10.4 ± 0.3 [0.409 ± 0.012] 5.00 [0.197] 0.30 [0.012] 0.56 [0.022] 11.0 11.4 ± 0.3 [0.449 ± 0.012] 5.50 [0.217] 0.30 [0.012] 0.56 [0.022] 12.0 12.7 ± 0.3 [0.500 ± 0.012] 6.00 [0.236] 0.30 [0.012] 0.56 [0.022] 13.0 13.5 ± 0.3 [0.532 ± 0.012] 6.50 [0.256] 0.35 [0.014] 0.66 [0.026] 14.0 14.4 ± 0.4 [0.567 ± 0.016] 7.00 [0.276] 0.35 [0.014] 0.68 [0.027] 15.0 15.7 ± 0.4 [0.618 ± 0.016] 7.50 [0.295] 0.35 [0.014] 0.68 [0.027] 16.0 16.9 ± 0.4 [0.665 ± 0.016] 8.00 [0.315] 0.35 [0.014] 0.68 [0.027] 18.0 19.0 ± 0.4 [0.748 ± 0.016] 9.00 [0.354] 0.40 [0.016] 0.76 [0.030] 20.0 21.4 ± 0.4 [0.843 ± 0.016] 10.00 [0.394] 0.40 [0.016] 0.76 [0.030] 22.0 23.2 ± 0.4 [0.913 ± 0.016] 11.00 [0.433] 0.45 [0.018] 0.89 [0.035] 25.0 26.8 ± 0.4 [1.055 ± 0.016] 12.50 [0.452] 0.45 [0.018] 0.89 [0.035] 27.0 28.2 ± 0.5 [1.110 ± 0.020] 12.50 [0.452] 0.45 [0.018] 0.89 [0.035] 28.0 30.0 ± 0.5 [1.181 ± 0.020] 14.00 [0.551] 0.45 [0.018] 0.89 [0.035] 30.0 32.1 ± 0.5 [1.264 ± 0.020] 15.00 [0.591] 0.45 [0.018] 0.89 [0.035] *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) Size selection Always order the largest size that will shrink snugly over the component to be covered. Standard packaging On spools. Ordering description Specify product name, size and color (for example, ZH2-6.0-0). 1-144 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products ZH4 1 Very-Thin-Wall, Very Flexible, Highly Flame- Retardant, Low Recovery Temperature, ZEROHAL Polyolefin Tubing Product Facts  2:1 shrink ratio  Highly flame-retardant; UL/CSA VW-1 flammability rating  Very thin wall provides space savings and rapid shrinking  Low shrink temperature further reduces installation time and risk of damage to temperature-sensitive components  Environmentally friendly tubing essentially free of halogens  Emits minimal amounts of toxic or acid gasses when burned Applications rail and mass transit vehi- Installation  RoHS compliant cles, buildings, and other Electrical insulation and Minimum shrink enclosed areas where protection of in-line compo- temperature: 70°C [158°F] emission of toxic gasses nents, disconnect terminals, from burning materials con- Minimum full recovery and splices in computers, taining halogens is very temperature: 90°C [194°F] appliances, and other com- undesirable. mercial electronic products. Operating Temperature Range Typically used where space saving is important. Offers -30°C to 125°C the ability to pack compo- [-22°F to 257°F] nents more closely than is possible with standard tubings. Used for strain relief on high-density con- nectors. Suitable for use in Specifications/Approvals ® Series UL CSA Raychem ZH4 E85381 VW-1 LR31929 VW-1 RW-3036 300 V, 125ºC 150 V, 125ºC Available in: Americas Europe Asia Pacific   1-145 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products ZH4 (Continued) Product Dimensions Inside Diameter Wall Thickness Expanded Maximum Expanded as Recovered* Size as Supplied Recovered Supplied After Heating After Heating (Nominal) (Minimum) 0.6 0.95 ± 0.25 [0.037 ± 0.010] 0.30 [0.012] 0.10 [0.004] 0.25 [0.010] 0.8 1.20 ± 0.25 [0.047 ± 0.010] 0.40 [0.016] 0.10 [0.004] 0.25 [0.010] 1.0 1.40 ± 0.25 [0.055 ± 0.010] 0.50 [0.020] 0.10 [0.004] 0.25 [0.010] 1.5 1.90 ± 0.25 [0.075 ± 0.010] 0.75 [0.030] 0.10 [0.004] 0.25 [0.010] 2.0 2.30 ± 0.25 [0.091 ± 0.010] 1.00 [0.039] 0.10 [0.004] 0.25 [0.010] 2.5 2.80 ± 0.25 [0.110 ± 0.010] 1.25 [0.049] 0.15 [0.006] 0.25 [0.010] 3.0 3.30 ± 0.25 [0.130 ± 0.010] 1.50 [0.059] 0.15 [0.006] 0.25 [0.010] 3.5 3.80 ± 0.25 [0.150 ± 0.010] 1.75 [0.069] 0.15 [0.006] 0.25 [0.010] 4.0 4.40 ± 0.25 [0.173 ± 0.010] 2.00 [0.079] 0.15 [0.006] 0.25 [0.010] 5.0 5.50 ± 0.25 [0.217 ± 0.010] 2.50 [0.098] 0.15 [0.006] 0.25 [0.010] 6.0 6.50 ± 0.40 [0.256 ± 0.016] 3.00 [0.118] 0.15 [0.006] 0.28 [0.011] 7.0 7.50 ± 0.40 [0.295 ± 0.016] 3.50 [0.138] 0.15 [0.006] 0.28 [0.011] 8.0 8.50 ± 0.40 [0.335 ± 0.016] 4.00 [0.158] 0.15 [0.006] 0.28 [0.011] 9.0 9.50 ± 0.40 [0.374 ± 0.016] 4.50 [0.177] 0.15 [0.006] 0.28 [0.011] 10.0 10.50 ± 0.50 [0.413 ± 0.020] 5.00 [0.197] 0.15 [0.006] 0.28 [0.011] *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) Size selection Always order the largest size that will shrink snugly over the component to be covered. Standard packaging On spools. Ordering description Specify product name, size and color (for example, ZH4-2.0-0). 1-146 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products ZH-100 1 Flexible, Thin-Wall, Low- Fire-Hazard Tubing Product Facts  2:1 shrink ratio  Low smoke emissions  Flexible, flame-retardant  No added halogens  Low evolution of acid gases  RoHS compliant Applications Installation Operating Temperature Range ZH-100 is a flexible, Minimum shrink -30°C to 105°C thin-wall, heat-shrinkable temperature: 80°C [176°F] [-22°F to 221°F] tubing designed for low- Minimum full recovery fire-hazard applications. temperature: 120°C [248°F] ZH-100 contains no added halogens, and exhibits excellent fire safety characteristics combined with low evolution of acid gases, while retaining good mechanical and fluid resistance properties. Specifications/Approvals Series Industry Raychem ZH-100 BR 1326A RW-2031 Available in: Americas Europe Asia Pacific   1-147 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products ZH-100 (Continued) Product Dimensions Inside Diameter Recovered Wall Thickness* Size Minimum Expanded Maximum Recovered After Heating as Supplied After Heating 1/8 3.2 [0.125] 1.6 [0.062] 0.50 ± 0.10 [0.019 ± 0.004] 3/16 4.8 [0.187] 2.4 [0.093] 0.50 ± .0.10 [0.019 ± 0.004] 1/4 6.4 [0.250] 3.2 [0.125] 0.65 ± 0.15 [0.026 ± 0.006] 3/8 9.5 [0.375] 4.8 [0.187] 0.65 ± 0.15 [0.026 ± 0.006] 1/2 12.7 [0.500] 6.4 [0.250] 0.65 ± 0.15 [0.026 ± 0.006] 3/4 19.0 [0.750] 9.5 [0.375] 0.75 ± 0.15 [0.030 ± 0.006] 1 25.4 [1.000] 12.7 [0.500] 0.90 ± 0.15 [0.035 ± 0.006] 1 1/2 38.0 [1.500] 19.0 [0.750] 1.00 ± 0.20 [0.039 ± 0.008] 2 51.0 [2.000] 25.4 [1.000] 1.15 ± 0.25 [0.045 ± 0.010] *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) Size selection Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. Standard packaging On spools. Ordering description Specify product name, size and color (for example, ZH-100 1/8-0). 1-148 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 Heat-shrinkable Tubing RAYCHEM Tubing Products ZHTM 1 Heat-Shrinkable, Flexible Tubing with Low Toxicity for Fire Safety Applications Product Facts  2:1 shrink ratio  Low smoke emission  System 100 tubing  RoHS compliant Applications properties. Used for Installation insulation and protection A flexible, thick-wall, heat- Minimum shrink of cables, harnesses, and shrinkable tubing to be temperature: 80°C [176°F] electrical and electronic used in conjunction with components in enclosed Minimum full recovery -100 molded parts and spaces, such as in marine temperature: 121°C [250°F] Zerohal cable to form applications, mass transit Raychem System 100. This systems, and offshore Operating Temperature Range material exhibits excellent installations, to reduce fire safety characteristics toxicity risks, or where -30°C to 105°C combined with low smoke equipment would be [-22°F to 221°F] emission and low evolution irreparably damaged of acid gases while by corrosive products retaining good mechanical of combustion. and fluid-resistance Specifications/Approvals Series Military Agency Industry Raychem ZHTM Def. Stan. 59-97 BS 4G-198 Part 3 Type 15 BR 1326A RW-2058 Issue 3 Type 8 VG 95343 Part 5 Type L VDE 0341/Pt 9005 Available in: Americas Europe Asia Pacific   1-149 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666 RAYCHEM Tubing Products ZHTM (Continued) Product Dimensions Inside Diameter Recovered Wall Thickness* Size Minimum Expanded Maximum Recovered After Heating as Supplied After Heating 3/1.5 3.0 [0.118] 1.5 [0.059] 0.70 ± 0.10 [0.028 ± 0.004] 5/2.5 5.0 [0.197] 2.5 [0.098] 0.75 ± 0.12 [0.030 ± 0.005] 8/4 8.0 [0.315] 4.0 [0.157] 0.80 ± 0.15 [0.031 ± 0.006] 12/6 12.0 [0.472] 6.0 [0.236] 0.90 ± 0.15 [0.035 ± 0.006] 18/9 18.0 [0.709] 9.0 [0.354] 1.00 ± 0.18 [0.039 ± 0.007] 24/12 24.0 [0.945] 12.0 [0.472] 1.10 ± 0.20 [0.043 ± 0.008] 40/20 40.0 [1.575] 20.0 [0.789] 1.30 ± 0.23 [0.051 ± 0.009] 50/30 50.0 [1.969] 30.0 [1.181] 1.50 ± 0.28 [0.059 ± 0.011] *Wall thickness will be less if tubing recovery is restricted during shrinkage. Ordering Information Color Standard Black (-0) Size selection Always order the largest size that will shrink snugly over the component to be covered. Special order sizes are available upon request. Standard packaging On spools. Ordering description** Specify product name, size and color (for example, ZHTM 8/4-0). **Europe only. For supply to Def Stan and BS add -DS or -BS to ordering description. 1-150 9-1773447-9 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 Germany: 49-6251-133-1999 CIS WR 08/2011 millimeters unless otherwise reference purposes only. Canada: 1-905-475-6222 China: 86-400-820-6015 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 te.com are metric equivalents. to change. L. & S. America: 54-11-4733-2200 UK: 44-800-267-666