RF Coax Connectors COAXICON Contacts Miniature Contacts are Product Facts designed for high density ■ Tyco Electronics provides multiple circuit connector a variety of contacts for applications. A wide range coaxial connectors of cable sizes is accommo- ■ Contacts are available in dated by using three sizes a range of sizes that may of outer shell termination be used with the various ends and three sizes of types of coaxial cable on contacts. the market Subminiature Contacts ■ COAXICON contacts are of are used in high density the crimp, snap-in type and applications and are ideal are available in the follow- for mixing coaxial and other ing designs: Miniature styles of pin and socket Contacts, Subminiature contacts in the same con- Contacts and Size 8 Contacts nector housing. Size 8 Contacts are com- patible with industry stan- dard size 8 connectors such as Subminiature D and AMP-HDI connector housings. Straight and right-angle styles, as well as pc board versions for AMP-HDI connectors are available. 244 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors Miniature Contacts Temperature Range — -55°C to Inner Dielectric — Polypropylene, Performance Characteristics Finish +125°C nylon, or polymethylpentene, general Insulation Resistance — 5000 Outer Shell, Center Conductor — purpose Test Method for Electronic and megohms min 0.00076 [.000030] gold over 0.00076 Electrical Component Parts — Retention Spring — Stainless steel [.000030] nickel Dielectric Withstanding Voltage — MIL-STD-202 per QQ-S-766 Retention Spring — Nickel per 1,000 volts rms for 1 minute Ferrule — Copper per QQ-C-576 QQ-N-290 Contact Resistance — 2.0 milliohms Material Ferrule — Bright tin per MIL-T-10727 @ 1 ampere Outer Shell — Brass per MIL-C-50 Low-Level Conductivity — 10 milli- Center Conductor — Brass per volts DC min. QQ-B-626, or Beryllium copper VSWR — 1.3 to 1.0 @ 1,000 MHz max. per QQ-C-533 Cable Retention — Retention Springs Note: Part No. 201142-2 A ferrule and retention spring RG/U Retention (201142-2) are required for each pin Cable lbs [N] and socket. 58C 50 [222] Extraction Tool No. 305183-8 188A 30 [133] Ferrules 180B 28 [125] 195A 16 [71] Durability — 500 cycles @ 10 cycles per minute max. Vibration—2 hrs. per MIL-STD-202, Method 201 Shock — 50 G’s per MIL-Std-202, Method 213, Cond. G Socket Pin Temperature Cycling—5 cycles per MIL-STD-202, Method 102, Cond C. Die Insert for Tools: Part Numbers Ferrule Integral Die Hand Tool 69710-1 RG/U Cable PRO-CRIMPER No. Hand Tool Pneu. 69365-2, Pin Socket 2 69365-3 316, 188, 188A 328666-X —— 69227-2 201143-5 201144-5 174 179, 179A, 179B 161, 187, 187A 328666-X —— 69227-2 201143-1 201144-1 Belden 9221 188 Double Braid 221848-3 58290-1 — 69227-2 201143-5 201144-5 316 Double Braid 122 328664-X 45639-2 91912-3 69222-2 201145-1 — 180, 180A, 180B 195, 195A, 328664-X 45639-2 91912-3 69222-2 201145-2 201146-2 21-597 Belden 8218 328664-X 45639-2 91912-3 69222-2 201145-2 201146-2 58, 58A, 58B, 58C 328663-X 45740-2 — 69220-2 201145-4 201146-4 141 -X 330478 69248-4 — 69315-4 201145-4 201146-4 55, 55A, 55B, 223 124, 140, 210 62, 62A, 62B 329006-X —— 69675-1 201097-1* 201098-1* 59, 59A, 59B Twisted Pair 2 24-22 AWG [0.2-0.4 mm ] -X 328666 91912-4 — 69672-X 201143-5 201144-5 1 (Stranded) Shielded Wire -X 328663 45740-2 — 69220-2 201145-4 201146-4 22, NAS-702, Class B Brand Rex T5788A -X 328664 45639-2 91912-3 69222-2 201145-2 201146-2 2 3 26 AWG [0.12-0.155 mm ] *These contacts are for use in the 4-position G Series connector modules only. 1 Maximum insulation diameter–2.92 [.115] (two wires combined). 2 Includes bench mount and foot control; requires Manual Take-Up Attachment No. 69689. 3 Dielectric O.D.–2.69 [.106] max.; Cable O.D.–4.06 [.160]. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 245 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors Miniature PC Board Sockets Material Shell and Center Contact — Brass per MIL-C-50 and QQ-B-626 Dielectric — Polypropylene, or Shell Polymethylpentene, general purpose Finish Spring Latch Center Contact—0.00076 [.000030] gold over copper Shell — Gold plated per MIL-G-45204 Performance Characteristics Dielectric Withstanding Voltage — 1,000 volts, rms Impedance — Non-constant Operating Temperature Range — Locking Latch -55°C to +85°C Center Conductor 15.24 Spring Locking Latch [.600] Latch 2.54 12.7 2.54 2.54 6.23 [.100] Ref. Ref. [.500] [.100] [.100] [.245] 4.52 Dia. [.178] 2.54 1.32 Ref. Dia. [.100] [.052] A (5 Holes) 0.36 Ref. [.014] Recommended Mounting Hole Layout B 12.7 1.02 Dia. 1.27 [.500] 2.54 Typ. [.040] [.050] [.100] 17.78 [.700] Retention Dimensions PC Board Type Part No. Thickness lb. [N] A B 1.57 9.07 3.18 Spring Latch 1.25 5.56 50084-1 .062 .357 .125 3.18 7.49 4.75 Spring Latch 1.25 5.56 50095-1 .125 .295 .187 3.18 7.49 4.75 Locking Latch 7.25 31.16 50105-1 .125 .295 .187 1.57 9.07 3.18 Locking Latch 7.25 31.16 50107-1 .062 .357 .125 Note: For mateable Miniature Contacts, see page 245. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 246 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors Subminiature PC Board Sockets Material Shell and Center Contact — Brass Shell per MIL-C-50 and QQ-B-626 Dielectric — Polypropylene, or polymethylpentene, general purpose Locking Latch Finish Center Contact — 0.00076[.000030] gold per MIL-G-45204 over copper per MIL-C-14550 Shell — Gold Spring Latch Center Conductor Performance Characteristics Dielectric Withstanding Voltage — 600 volts, rms 22.23 Max. ±.0.2 Operating Temperature Range — [.875] 3.05 ±.008 [.120 ] -55°C to +85°C 4.52 1.09 Dia. [.178] [.043] 1.47 [.058] #57 Drill Locking (3 Holes) A Latch ±0.2 0.84 0.84 10.16 ±.008 [.033 ] Dia. 10.16 [.033] [.400] [.400] 15.24 [.600] 15.24 [.600] Recommended Mounting Hole Layout PC Board Dim. Type Part No. Thickness L 1.57 2.54 Spring Latch 226023-1 .062 .100 1.57 2.54 Locking Latch 226060-1 .062 .100 Mating Subminiature COAXICON Pins These short Subminiature COAXICON Pins are recommended for use with any of the sockets listed above. Note: Alignment springs are not required for this application and are not Die Insert for Tools: Integral RG/U Ferrule Hand Tool 69710-1 included with the pin assemblies. Die Part No. Cable No. Pneu. 69365-2, Hand Tool 69365-3 174 1-332056-0 91911-3 69690-X 51563-8 316, 188, 188A 179, 179A, 179B 1-332056-0 91911-4 69690-1 51563-8 187, 187A 161 1-332056-0 69656-5 — 51563-8 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 247 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors Subminiature Contacts Material Outer Shell — Brass per MIL-C-50 Center Conductor — Beryllium copper per QQ-C-533 (Pin); Brass per QQ-B-626 (Socket) Inner Dielectric — Polypropylene, nylon, or polymethylpentene, general purpose Ferrule Retention Spring — Stainless steel A per QQ-S-766 Ferrule Ferrule — Copper per QQ-C-576 Finish Outer Shell and Socket 16.51 Center Conductor — 0.00076 Max. [.650] Socket Pin [.000030] gold over 0.00127 [.000050] nickel Pin Center Conductor — 0.00076 [.000030] gold over 0.00254 [.000100] copper A = Multimate Pin 25.65 [1.010] Ferrule — Bright tin per MIL-T-10727 Short Pin 22.66 [.892] Selection Chart for Coaxial Cable Die Insert for Tools: Integral Contact Part Numbers Hand Tool 69710-1 RG/U Cable Die PRO-CRIMPER Multimate Short Pneu. Tool 69365-2, Hand Tool Socket Ferrule Pin Pin 69365-3* 178, 178A, 178B 69656-2 69690-2 226537-2 — 51565-2 1-332057-0 196, 196A 196 69656-9 — 226537-2 — 51565-2 1-225088-1 (Double Braid) 174, 316 — 91911-3 69690 -226537-1 — 51565-1 1-332056-0 188, 188A 179, 179A, 179B 187, 187A — 911911-4 69690-1 226537-1 — 51565-1 1-332056-0 Belden 9221 RD-316 69656-7 — 226537-1 — 51565-1 1-225088-3 187 69656-8 — 226537-1 — 51565-1 1-225088-1 (Double Braid) 161 69656-5 — 226537-1 — 51565-1 1-332056-0 Selection Chart for Twisted Pairs and Shielded Wire Die Insert for Tools: Contact Part Numbers Hand Tool Wire Size Integral Die PRO-CRIMPER 69710-1 Multimate Short Socket Ferrule 2 Hand Tool AWG [mm ] Pneu. Tool Pin Pin 69365-2, 69365-3* 30 0.05 69656-2 — 69690-2 226537-3 51563-3 51565-3 1-332057-0 (Twisted Pair, Solid) 28 0.08-0.09 — 91911-3 69690- 226537-3 51563-3 51565-3 1-332057-0 (Twisted Pair, Solid) 28 69690-1 (Twisted Pair, Stranded; 0.08-0.09 — 91911-4 or 226537-3 51563-3 51565-3 1-332057-0 7 str., .005 [0.13] Dia.) 69690-2 26 (Twisted Pair, 0.12-0.15 — 91911-3 69690-2 226537-3 51563-3 51565-3 1-332057-0 Solid or Stranded; 7 str., .0063 [0.16] Dia.) 26 (Shielded, 0.75 [1.91] 0.12-0.15 69656-3 — 69690-3 226537-1 — 51565-1 1-332057-0 Max. O.D.) *Includes bench mount and foot control. Extraction Tool 305183 Note: A ferrule is required for each pin and socket. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 248 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208