TE CONNECTIVITY 259006-2

PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components 1.3 µ µm LED Product Facts ■ High coupled power, typically 75 µW into 62.5 µm fiber ■ High reliability MTTW 8 2.3 x 10 hours ■ Wavelength centered at 1320 nm ■ Hermetically sealed TO ST Style TO-18 style package installed in industry standard ADMs ■ Functional over – 40°C to 85°C operating Specifications: 100mA Forward Current, 25°C temperature range Part No. Test Parameter Units Min. Typ. Max. Suffix Conditions Coupled power µW10 20 Tyco Electronics’ InGaAsP -1 — — 50 µm fiber dBm –20 –17 SLED products offer high µW30 45 coupled powers for digital 62.5 µm fiber -1 — — dBm –15 –13 fiber optic transmission µW20 30 50 µm fiber -2 — — applications. dBm –17 –15 µW50 75 Compatible with 62.5 µm fiber -2 — — dBm –13 –11 industry standards, the Wavelength nm 1290 — 1350 Tyco Electronics LED ADMs —— Spectral FWHM nm — — 170 consist of hermetically Forward voltage V — 1.4 1.7 sealed TO-18 style SLEDs Capacitance — f=1MHz, 0V pF — 15 50 which have been actively Leakage current –2V µA— — 2 aligned for maximum 100mA 50% duty Rise/fall time — ns — 2.5 4 cycle 12.5 MHz coupled power. The Bandwidth — — MHz — 115 — devices are permanently ∆λ/∆T nm/°C .38 fixed in place to assure — –40 to +85°C — — ∆POUT/∆T dB/°C –.03 stable performance over 8 Reliability MTTW — –1.5dB EOL hrs — 2.3 x 10 — all operating conditions. Note: dBm is rounded to nearest integer value. The ST connectors are suitable for both panel/ bulk-head and PC board mounting. Part Numbers Each unit is burned-in. Connector Interface Coupled power, capacitance, TO ST Style leakage current and spectral Standard 259006-1 259012-1 characteristics are measured Premium 259006-2 259012-2 on each unit. No data is Note: Coupled power in specifications. supplied with the unit. A lot code is used for traceability. Box label marked with date code on TO’s and pigtail ADM parts are physically marked. For additional information on product qualification, reference Product Specification 108-55008. Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 1 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications. PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components (Continued) 1.3 µ µm LED (Continued) Absolute Maximum Rating Units Min. Max. Operating temperature C –40 85 Storage temperature C –40 125 Reverse voltage V — 2 Forward current mA — 150 Mechanical Dimension Reference Figure # 1 2 3 Page No. 202 202 202 Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 2 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications. PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components (Continued) “NEW” 1310nm Fabry-Perot Lasers (TO-56) ‘TO-56 Laser Low Speed Device Product Facts ■ 1310nm typical emission wavelength Tyco Electronics’ TO-56 Laser The Laser packages are ■ Low threshold, low operating current is an InGaAsP/InP-based Strained uncooled, hermetically sealed Multi-Quantum Well (SMQW) for high reliability and incorporate ■ High-power, wide device that provides stable, single a photodiode for monitoring temperature range transverse mode oscillation with optical output. operation emission wavelength of 1310nm. ■ High reliability, long operational life Absolute Maximum Ratings ■ Available in two pin-out Symbol Parameter Conditions Ratings Unit configurations Po Light output power - 8 mW V Reverse Voltage (Laser diode) - 2 V RL V Reverse Voltage (Photodiode) - 20 V RD Part Numbers I Forward current (Photodiode) - 2 mA FD 1382568-2 (Case Anode) T Case Temperature - -40 to +85 °C C 1382675-2 (Common Anode) T Storage Temperature - -40 to +85 °C stg Electrical/Optical Characteristics Limits Symbol Parameter Unit Min Typ. Max. Optical λc Center Wavelength (25 °C) 1280 - 1320 nm Spectrum λct Center Wavelength (-40°C to +85°C) 1260 - 1350 nm ∆λ Spectral Width @ Po = 4mW(-40°C to +85°C) - 1 2.0 nm λc Wavelength temperature coefficient - 0.4 0.5 nm/°C T Light- I Threshold current @ 25°C - 6 10 mA th Current I Threshold current over temperature (-40°C to +85°C) 1 32 mA thOT Curve V Forward Voltage - 1.2 2.0 V F η Slope Efficiency @ 25°C 0.2 0.26 0.4 mW/mA I Drive current above I for 5 mW (-40°C to +85°C) 7 - 20 mA DR th P Optical Power @ I -3 mA - - 20 µW th th Modulation t t Rise & Fall Times - - 1.5 ns r, f Far Field θ Beam Divergence (Parallel) - 18 40 Deg // θ Beam Divergence (Perpendicular) - 26 40 Deg ⊥ Monitor I Current @ 5 mW (-40°C to +85°C) 0.3 - 0.7 mA m Diode I Dark current (25°C,V = 5V) - 0.01 0.1 µA d RD C Capacitance (V = 5V, ƒ = 1MHz) - 1.2 20 PF D RD Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 3 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications. PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components (Continued) “NEW” 1310nm Fabry-Perot Lasers (TO-56) (Continued) TO-56 Laser High Speed Device Product Facts ■ 1310nm typical emission wavelength ■ Low threshold, low Tyco Electronics’ TO-56 Laser The Laser packages are operating current is an InGaAsP/InP-based Strained uncooled, hermetically sealed Multi-Quantum Well (SMQW) for high reliability and incorporate ■ High-power, wide device that provides stable, single a photodiode for monitoring temperature range transverse mode oscillation with optical output. operation emission wavelength of 1310nm. ■ High reliability, long operational life Absolute Maximum Ratings ■ Available in two pin-out Symbol Parameter Conditions Ratings Unit configurations Po Light output power - 8 mW V Reverse Voltage (Laser diode) - 2 V RL V Reverse Voltage (Photodiode) - 20 V Part Numbers RD I Forward current (Photodiode) - 2 mA FD 1382585-2 (Case Anode) T Case Temperature - -40 to +85 °C C 1382676-2 (Common Anode) T Storage Temperature - -40 to +85 °C stg Electrical/Optical Characteristics Limits Symbol Parameter Unit Min Typ. Max. Optical λc Center Wavelength (25 °C) 1280 - 1320 nm Spectrum λct Center Wavelength (-40°C to +85°C) 1260 - 1350 nm ∆λ Spectral Width @ Po = 4mW(-40°C to +85°C) - 1 3.0 nm λc Wavelength temperature coefficient - 0.4 0.5 nm/°C T Light- I Threshold current @ 25°C - 6 10 mA th Current I Threshold current over temperature (-40°C to +85°C) 1 40 mA thOT Curve V Forward Voltage - 1.2 2.0 V F η Slope Efficiency @ 25°C I +10 mA 0.2 0.26 0.4 mW/mA th I Drive current above I for 5 mW (-40°C to +85°C) 9 - 25 mA DR th P Optical Power @ I -3 mA - - 20 µW th th Modulation t t Rise & Fall Times - - 0.2 ns r, f Far Field θ Beam Divergence (Parallel) - 18 40 Deg // θ Beam Divergence (Perpendicular) - 26 40 Deg ⊥ Monitor I Current @ 5 mW (-40°C to +85°C) 0.3 - 0.7 mA m Diode I Dark current (25°C,V = 5V) - 0.01 0.1 µA d RD C Capacitance (V = 5V, ƒ = 1MHz) - 1.2 20 PF D RD Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 4 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications. PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components (Continued) “NEW” Singlemode Receptacle Transmitters SC Receptacle Transmitter Optical Subassembly Low Speed Product Facts ■ 156 Mb/s data rates ■ 1310nm typical Tyco Electronics’ SC Receptacle The OSA’s are uncooled, emission wavelength Transmitter Optical Subassembly hermetically sealed for high ■ Low threshold, low (OSA), with InGaAsP/InP-based reliability and incorporate a operating current Strained Multi-Quantum Well photodiode for monitoring ■ Singlemode fiber stub with (SMQW) device, provides stable, optical output. split sleeve single transverse mode oscillation with emission wavelength of ■ Wide temperature range 1310nm. operation ■ High reliability, long Absolute Maximum Ratings - 1382459-1, -2 operational life Limits Symbol Parameter Conditions Unit ■ Telecordia GR-468 qualified Min Max I Laser Forward Current DC - 150 mA f I Laser Reverse Current DC - 100 uA r Part Numbers V Reverse Voltage (Laser diode) DC - 2 V RL 1382459-1 (Case Anode - 0 to -5 dBm) V Reverse Voltage (Photodiode) DC - 20 V RD 1382459-2 (Common Anode - 0 to -5 dBm) I Forward current (Photodiode) - - 2 mA FD 1382461-1 (Case Anode - -8 to -14 dBm) T Operating Case Temperature - 0 +70 °C C 1382461-2 (Common Anode - -8 to -14 dBm) T Storage Temperature - -40 +85 °C stg Electrical/Optical Characteristics - 1382459-1, -2 Limits Symbol Parameter Test Condition Unit Min Typ. Max. Optical P Optical Output Power (CW) Reference Grade -5 - 0 dB o Spectrum Cable Tc=0°C to +70°C 0.312 1.0 µW λ Central Wavelength Tc=25°C 1290 - 1315 nm c Tc=0°C to +70°C 1280 1335 ∆λ Spectral Width One Sigma, RMS - 1 2.5 nm (0°C to +70°C) λ Wavelength temperature - 0.4 0.5 nm/ °C cT coefficient Light- I Threshold current Tc=25°C 3 6 10 mA th Current Tc=0°C to +70°C 1.5 25 mA Curve V Forward Voltage - 1.2 2.0 V F η Slope Efficiency Tc=25°C 32 48 60 uW/mA I Drive Current above I Tc=25°C 17 - 32 mA d th @Po (CW) MAX Tc=0°C to +70°C 17 - 40 mA P Coupled Power in "off" state I = I - 2mA - - 12 µW th th Modulation t t Rise & Fall Times 20% - 80% - 1.5 ns r, f Monitor I Monitor Output current Tc=0°C to +70°C 0.5 - 1.3 mA m @ Po MAX Diode Dark current, Photodiode V = 5V - 0.01 0.1 mA RD Tc=0°C to +70°C C Capacitance, Photodiode V = 5V, 1MHz - 1.2 20 pF D RD Tc=0°C to +70°C ∆R Tracking Error @ Po Tc=0°C to +70°C ±1.0 dB MAX Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 5 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications. PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components (Continued) “NEW” Singlemode Receptacle Transmitters (Continued) SC Receptacle Transmitter Absolute Maximum Ratings - 1382461-1, -2 Limits Optical Subassembly Symbol Parameter Conditions Unit Min Max Low Speed (Continued) I Laser Forward Current DC - 150 mA f I Laser Reverse Current DC - 100 uA r Part Numbers V Reverse Voltage (Laser diode) DC - 2 V RL 1382459-1 (Case Anode - 0 to -5 dBm) V Reverse Voltage (Photodiode) DC - 20 V RD I Forward current (Photodiode) - - 2 mA 1382459-2 (Common Anode - 0 to -5 dBm) FD T Operating Case Temperature - -40 +85 °C C 1382461-1 (Case Anode - -8 to -14 dBm) T Storage Temperature - -40 +85 °C stg 1382461-2 (Common Anode - -8 to -14 dBm) Electrical/Optical Characteristics - 1382461-1, -2 Limits Symbol Parameter Test Condition Unit Min Typ. Max. Optical P Optical Output Power (CW) Reference Grade -14 - -8 dB o Spectrum Cable Tc=-40°C to +85°C 39 158 µW λ Central Wavelength Tc=25°C 1290 - 1333 nm c Tc=-40°C to +85°C 1261 1360 ∆λ Spectral Width One Sigma, RMS - 1 2.5 nm (-40°C to +85°C) λ Wavelength temperature - 0.4 0.5 nm/ °C cT coefficient Light- I Threshold current Tc=25°C 3 6 10 mA th Current Tc=-40°C to +85°C 1.5 32 mA Curve V Forward Voltage - 1.2 2.0 V F η Slope Efficiency Tc=25°C 18 - 30 uW/mA I Drive Current above I Tc=25°C 5 - 9 mA d th @Po (CW) MAX Tc=-40°C to +85°C 4 - 13 mA P Coupled Power in "off" state I = I - 2mA - - 12 µW th th Modulation t t Rise & Fall Times 20% - 80% - 1.5 ns r, f Monitor I Monitor Output current Tc=-40°C to +85°C 0.2 - 0.45 mA m @ Po MAX Diode Dark current, Photodiode V = 5V - 0.01 0.1 mA RD Tc=-40°C to +85°C C Capacitance, Photodiode V = 5V, 1MHz - 1.2 20 pF D RD Tc=-40°C to +85°C ∆R Tracking Error @ Po Tc=-40°C to +85°C ±1.5 dB MAX Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 6 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications. PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components (Continued) “NEW” Singlemode Receptacle Transmitters (Continued) SC Receptacle Transmitter Optical Subassembly High Speed Product Facts ■ Data rates up to 3.125 Gb/s ■ 1310nm typical Tyco Electronics’ SC Receptacle The OSA’s are uncooled, emission wavelength Transmitter Optical Subassembly hermetically sealed for high ■ Low threshold, low (OSA), with InGaAsP/InP-based reliability and incorporate a operating current Strained Multi-Quantum Well photodiode for monitoring (SMQW) device, provides stable, optical output. ■ Singlemode fiber stub with single transverse mode oscillation split sleeve with emission wavelength of ■ Wide temperature range 1310nm. operation Absolute Maximum Ratings ■ High reliability, long operational life Limits Symbol Parameter Conditions Unit Min Max ■ Telecordia GR-468 qualified I Laser Forward Current DC - 150 mA f I Laser Reverse Current DC - 100 uA r V Reverse Voltage (Laser diode) DC - 2 V RL V Reverse Voltage (Photodiode) DC - 20 V RD Part Numbers I Forward current (Photodiode) - - 2 mA FD 1382462-1 (Case Anode) T Operating Case Temperature - -40 +85 °C C 1382462-2 (Common Anode) T Storage Temperature - -40 +85 °C stg Electrical/Optical Characteristics Limits Symbol Parameter Test Condition Unit Min Typ. Max. Optical P Optical Output Power (CW) Reference Grade -14 - -8 dB o Spectrum Cable Tc=-40°C to +85°C 39 158 µW λ Central Wavelength Tc=25°C 1303 - 1329 nm c Tc=-40°C to +85°C 1274 1356 ∆λ Spectral Width One Sigma, RMS - 1 2.5 nm (-40°C to +85°C) λ Wavelength temperature - 0.4 0.5 nm/ °C cT coefficient Light- I Threshold current Tc=25°C 3 6 10 mA th Current Tc=-40°C to +85°C 1.5 32 mA Curve V Forward Voltage - 1.2 2.0 V F η Slope Efficiency Tc=25°C 18 - 30 uW/mA I Drive Current above I Tc=25°C 5 - 9 mA d th @Po (CW) MAX Tc=-40°C to +85°C 4 - 13 mA P Coupled Power in "off" state I = I - 2mA - - 12 µW th th Modulation t t Rise & Fall Times 20% - 80% - 1.5 ns r, f Monitor I Monitor Output current Tc=-40°C to +85°C 0.1 - 0.6 mA m @ Po MAX Diode Dark current, Photodiode V = 5V - 0.01 0.1 mA RD Tc=-40°C to +85°C C Capacitance, Photodiode V = 5V, 1MHz - 1.2 20 pF D RD Tc=-40°C to +85°C ∆R Tracking Error @ Po Tc=-40°C to +85°C ±1.5 dB MAX Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 7 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications. PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components (Continued) “NEW” Singlemode Receptacle Transmitters (Continued) LC Receptacle Transmitter Optical Subassembly High Speed Product Facts ■ Data rates up to 3.125 Gb/s ■ 1310nm typical emission wavelength Tyco Electronics’ SC Receptacle The OSA’s are uncooled, Transmitter Optical Subassembly hermetically sealed for high ■ Low threshold, low (OSA), with InGaAsP/InP-based reliability and incorporate a operating current Strained Multi-Quantum Well photodiode for monitoring ■ Singlemode fiber stub with (SMQW) device, provides stable, optical output. split sleeve single transverse mode oscillation ■ Wide temperature range with emission wavelength of operation 1310nm. ■ High reliability, long Absolute Maximum Ratings operational life Limits Symbol Parameter Conditions Unit ■ Telecordia GR-468 qualified Min Max I Laser Forward Current DC - 150 mA f I Laser Reverse Current DC - 100 uA r V Reverse Voltage (Laser diode) DC - 2 V RL Part Numbers V Reverse Voltage (Photodiode) DC - 20 V RD 1382482-1 (Case Anode) I Forward current (Photodiode) - - 2 mA FD 1382482-2 (Common Anode) T Operating Case Temperature - -40 +85 °C C T Storage Temperature - -40 +85 °C stg Electrical/Optical Characteristics Limits Symbol Parameter Test Condition Unit Min Typ. Max. Optical P Optical Output Power (CW) Reference Grade -10 - -3 dB o Spectrum Cable Tc=-40°C to +85°C 100 500 µW λ Central Wavelength Tc=25°C 1295 - 1333 nm c Tc=-40°C to +85°C 1266 1360 ∆λ Spectral Width One Sigma, RMS - 1 2.5 nm (-40°C to +85°C) λ Wavelength temperature - 0.4 0.5 nm/ °C cT coefficient Light- I Threshold current Tc=25°C 3 6 10 mA th Current Tc=-40°C to +85°C 1.5 32 mA Curve V Forward Voltage - 1.2 2.0 V F η Slope Efficiency Tc=25°C 30 - 50 uW/mA I Drive Current above I Tc=25°C 10 - 16 mA d th @Po (CW) MAX Tc=-40°C to +85°C 9 - 24 mA P Coupled Power in "off" state I = I - 2mA - - 12 µW th th Modulation t t Rise & Fall Times 20% - 80% - 0.2 ns r, f Monitor I Monitor Output current Tc=-40°C to +85°C 0.3 0.5 0.7 mA m @ Po MAX Diode Dark current, Photodiode V = 5V - 0.01 0.1 mA RD Tc=-40°C to +85°C C Capacitance, Photodiode V = 5V, 1MHz - 1.2 20 pF D RD Tc=-40°C to +85°C ∆R Tracking Error @ Po Tc=-40°C to +85°C ±1.5 dB MAX Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 8 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications. PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components (Continued) “NEW” Singlemode Receptacle Receivers 1.25 Gb/s to 2.5 Gb/s Receiver Product Facts ■ Low Cost ■ InGaAs/InP PIN Photodiode with transimpedance amplifier ■ High sensitivity with automatic gain control Tyco Electronics’ Receivers and is suitable for transceiver ■ Differential ended operation 1382649-1 and 1382650-1 are applications. low cost LC connectorized ■ LC interface metal ADM assemblies, suitable Normal static precautions should for short and intermediate reach be taken with handling these Part Numbers applications. These receivers components to prevent ESD 1382649-1 (High Reflectance) incorporate a highly reliable damage or degradation. 1382650-1 (Low Reflectance) MOCVD InP PIN photodiode and TIA. This design operates at 3.3V Absolute Maximum Ratings Parameter Symbol Specification Units Operating Temperature T -40 to +85 °C OP Storage Temperature T -40 to +85 °C STG Electrical/Optical Characteristics Parameter Symbol Spec Min Typical Spec Max Units Conditions Differential Gain G 5 6.7 8 mV/uW 250kHz, 25°C @ -10dBm Bandwidth, -40°C to +85°C f 1.8 GHz C Bandwidth, +25°C f 2.1 GHz C 23 Sensitivity @ 1.25GHz P -19 dBm 2 -1 PBRS, LOW -10 -40°C to +85°C BER 10 23 Sensitivity @ 1.25GHz P -26 dBm 2 -1 PBRS, LOW -10 +25°C BER 10 23 Sensitivity @ 2.5GHz P -18 dBm 2 -1 PBRS, LOW -10 -40°C to +85°C BER 10 23 Sensitivity @ 2.5GHz P -21 dBm 2 -1 PBRS, LOW -10 +25°C BER 10 Max Optical Input Power P 0 dBm HIGH Reflectance, 1382649-1 R -14 dB ref (HR) Reflectance, 1382650-1 R -30 dB ref (LR) Power Supply Current I 50 mA -40°C to +85°C DD Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 9 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications. PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components (Continued) “NEW” Singlemode Receptacle Receivers (Continued) 155 Mb/s Receiver Product Facts ■ Low Cost ■ InGaAs/InP PIN Photodiode with transimpedance amplifier ■ High sensitivity with automatic gain control Tyco Electronics’ Receiver and TIA. The design operates ■ Differential ended operation 1382594-1 is a low cost LC at 3.3V and 5.0V and is suitable connectorized metal ADM for transceiver applications. ■ SC interface assembly, suitable for short Normal static precautions and intermediate reach should be taken when handling Part Number applications. This receiver this component to prevent ESD 1382594-1 incorporates a highly reliable damage or degradation. MOCVD InP PIN photodiode Absolute Maximum Ratings Parameter Symbol Specification Units Operating Temperature T 0 to +70 °C OP 155 Mb/s Operating Temperature T -40 to +85 °C OP 622 Mb/s Storage Temperature T -40 to +85 °C STG Electrical/Optical Characteristics Parameter Symbol Spec Min Typical Spec Max Units Conditions Differential Gain G 10 12.4 15 mV/uW 250kHz, 25°C @ -18dBm Bandwidth, -0°C to +70°C f 120 MHz C Bandwidth, +25°C f 525 MHz C 23 Sensitivity -0°C to +70°C P -34 dBm 2 -1 PBRS, LOW -10 BER 10 23 Sensitivity +25°C P -36 dBm 2 -1 PBRS, LOW -10 BER 10 Max Optical Input Power P -10 dBm HIGH Optical Impedance Z 36 44 57 Ω o Reflectance R -14 dB ref Power Supply Current I 50 mA -0°C to +70°C DD Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 10 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications. PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components (Continued) Multimode InGaAs Photodetector Product Facts ■ High reliability passivated planar structure ■ High responsivity ■ Low dark current ■ Low capacitance ■ Hermetically sealed TO-18 style package installed in industry standard ADMs TO ST Style ■ –40° to +85°C operating temperature range Tyco Electronics’ multimode design using InGaAs PIN photodetectors offers high responsivity for nearly all digital and analog fiber optic applications. The unique design balances high-speed performance with noise-free linear output. FC Spectral response has been optimized for the long wavelength region of 1150 nm to 1600 nm. Every component delivered has Specifications: 25°C, –5 Volts passed extensive high- Test temperature screening to Parameter P/N Units Min. Typ. Max. Conditions ensure long-term reliability. Responsivity 50 µm -1 LED source A/W .60 .71 Compatible with industry — 62.5 µm -1 of 10 µW A/W .50 .61 standards, Tyco Electronics’ 50 µm -2 LED source A/W .75 .83 Active Device Mount — 62.5 µm -2 of 10 µW A/W .65 .80 components incorporate Spectral -1, 2 — nm 1150 — 1600 hermetically sealed TO-18 Response style PIN packages which Capacitance -1, 2 f=1MHz pF — 1.5 1.7 have been actively aligned Dark current -1, 2 — nA — 1.5 5 for optimal performance. Rise/fall -1, 2 ns 1 — ST modules are suitable Bandwidth -1, 2 — GHz — 1.5 — for both panel/bulkhead 8 Reliability -1, 2 ID>5nA hrs — 2.0 x 10 — and PC board mounting. Each unit is burned-in. Responsivity, dark current and capacitance are measured on each unit. No data is supplied with the Part Numbers unit. A lot code is used for Connector Interface traceability. TO FC ST Style For additional information Standard 259007-1 259015-1 259013-1 on product qualification, Premium 259007-2 259015-2 259013-2 reference Product Specification 108-55009. Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 11 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications. PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components (Continued) Multimode InGaAs Photodetector (Continued) Dark Current Capacitance Volts Volts Dark Current vs.Temperature Responsivity vs.Temperature Temperature (°C) Temperature (°C) Absolute Maximum Rating Units Min. Max. Operating temperature °C –40 85 Storage temperature °C –40 125 Reverse current mA — 1 Mechanical Dimension Reference Figure # 1 2 3 Page No. 202 202 202 Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 12 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications. Percent Change Capacitance (pF) PDF Datasheet 1654551 Revised 6-03 Only available as PDF at: http://www.amp.com/fiberoptics/documents/1654551.pdf Electro-Optic Packaged Components (Continued) Mechanical Dimensions TO Package PIN + LED Part Numbers 259006-1, -2 259007-1, -2 Part No. AB Suffix 2.05 .660 -1 0.81 .026 1.52 .510 -2 .060 .020 Figure 1 ST Style Board Mount/Panel Mount PIN + LED Part Numbers 259012-1, -2 259013-1, -2 Part No. Description Suffix -1 Standard -2 Premium Figure 2 FC Type Panel Mount PIN Part Numbers 259015-1, -2 Figure 3 Copyright 2003 by Tyco Electronics. All Rights Reserved. AMP and Tyco are trademarks. Dimensions are in millimeters with inches (if shown) in © brackets. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. 13 For drawings, technical data or samples, contact your Tyco Electronics sales engineer, call 1-800-522-6752, or visit our Website at: http://www.amp.com/fiberoptics. Specifications subject to change. Consult Tyco Electronics for latest specifications.