Catalog 1308242 P&B Issued 11-15 KUP93 series General Purpose 3 to 10 Amp, Multicontact AC or DC Relay File E22575 File LR15734 Users should thoroughly review the technical data before selecting a product part number. It is recommended that users also seek out the pertinent approvals files of the agencies/laboratories and review them to ensure the product meets the requirements for a given application. Features Coil Data • AC coils 24, 120 & 240V 50/60 Hz.; DC 12 & 24VDC. DC Nominal • Contact arrangement to 3PDT. Nominal Must • Sockets available for all models. Resistance Coil Voltage Operate • Accepted pin pattern for HVAC industry. in Ohms Current Voltage • Primarily designed for the HVAC industry. ± 10%* (mA) DC 12 120 9.0 100 Coils 24 472 18.0 51 24 72 20.4 115 AC 120 1,700 102.0 24 Coils 240 7,200 204.0 12 *AC coils, ± 15% Contact Data @ 25°C Material: Fine silver or silver-cadmium oxide. Contact rating Operate Data @ 25°C Must Operate Voltage: Life DC Coils: 75% of nominal voltage or less. Material UL/CSA Ratings Expected AC Coils: 85% of nominal voltage or less. Operate Time (Excluding Bounce): 15 milliseconds, typical, 5A @ 28VDC or 240VAC, 80% PF, 1/10 at nominal voltage. Fine silver 100,000 HP @ 120VAC, 1/4 HP @ 240VAC Release Time (Excluding Bounce): DC Coils: 10 milliseconds, typical, at nominal voltage. 10A @ 28VDC or 240VAC, 80% PF, 100,000 AC Coils: 10 milliseconds, typical, at nominal voltage. Silver cadmiun 1/4 HP @ 120VAC, 1/3 HP @ 240 VAC oxide 10 FLA, 30 LRA @ 120 VAC, 5 FLA, 30,000 15 LRA @ 240 VAC Environmental Data Temperature Range: Storage: All Coils: -45°C to +105°C. Initial Dielectric Strength Between Open Contacts: 500V rms. Operating: Between Adjacent Contacts: 1,500V rms. DC Coils: -45°C to +70°C. Between Contacts and Coil: 1,500V rms. AC Coils: -45°C to +45°C. Coil Data @ 25°C Mechanical Data Nominal Power: DC Coils: 1.2 Watts. Termination: .187” x .020” quick connect. AC Coils: 2.7VA. Enclosures: Clear polycarbonate dust cover. Initial Insulation Resistance: 100 megohms, min., at 25°C.r Weight: 3.0 oz. (86g) approximately.Ñ Dimensions are shown for Dimensions are in inches over Specifications and availability www.te.com reference purposes only.N (millimeters) unless otherwise subject to change. Technical support: 731 specified. Refer to inside back cover. Catalog 1308242 P&B Issued 11-15 Ordering Information Typical Part No. > KUP93 14 A 2 1 -24 1. Type: KUP93 = Enclosed general purpose relay. 2. Contact Arrangement: 14 = 3 Form C (3PDT) 3. Coil Input: A = AC D = DC 4. Mounting: 1 = PLAIN CASE; 5. Terminals, Contact Material & Rating: 1 = .187” (4.75mm) quick connect, silver, 5 amps. 3 = .187” (4.75mm) quick connect, silver-cadmium oxide, 10 amps. 6. Coil Voltage: To 240VAC, 50/60 Hz. or 110VDC. Our authorized distributors are more likely to stock the following items for immediate delivery. No items in this series typically are stocked.o Outline Dimensions Wiring Diagrams 3 Form C 5 2 8 6 9 3 4 1 7 C2 C1 KUP93 Sockets Socket PC Board Layout (Component Side of Board) .218 REF. .205 DIA. (5.54) .790 (5.21) 20.07 (2 HOLES) .395 .161 ± .005 .276 (10.03) (4.09 ± .13) 2.350 (7.01) DIA. (2) HOLES .062 (59.69) .338 (1.57) MTG. HOLE (8.58) 1.858 .737 .157 ± .003 (47.19) (18.72) (3.99 ± .08) 1.858 .710 (47.19) (18.03) .097 ± .004 (2.46 ± .10) .790 .469 ± .015 .465 DIA. (11) HOLES (20.07) (11.91 ± .38) (11.81) .100 .317 1.250 (2.54) (8.05) (31.75) KUP93 Socket Number Socket P C Socket With Color Terminals Natural Nylon 27E168** **UL Recognized, file E22575 Socket: Rated 10 amperes. Will accept .187” (4.75mm) quick-connect terminals of all KUP93 relays. » Dimensions are shown for Dimensions are in inches over Specifications and availability www.te.com reference purposes only.N (millimeters) unless otherwise subject to change. Technical support: 732 specified. Refer to inside back cover. 1.308 (33.22)