TE CONNECTIVITY 2ER1
Specifications
Manufacturer
TE Connectivity
Manufacturers Part #
2ER1
Industry Aliases
6609031-3
Sub-Category
Power Line Filters
Brand
Corcom
Factory Pack Quantity
40
Datasheet
Corcom-20VR6-datasheet1-311208804.pdf
221 KiB
Extracted Text
RFI Power Line Filters Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Two-stage General Purpose RFI Power Line Filter R Series VR7/7M UL Recognized VR3/ER3 CSA Certified 1 VDE Approved 10VR6 VR1/ER1 R Series Specifications • Dual T section RFI filter provides premium Maximum leakage current each Line to Ground: VR Models ER Models performance @120 VAC 60 Hz: .4 mA .21 mA • Well suited for low impedance loads where noisy @250 VAC 50 Hz: .7 mA .36 mA RFI environments are present Hipot rating (one minute): • Controls pulsed, continuous and/or intermittent Line to Ground: 2250 VDC interference Line to Line: 1450 VDC • ER models offer low leakage current without Rated Voltage (max): 250 VAC deterioration of insertion loss Operating Frequency: 50/60 Hz Rated Current: 1 to 20A Operating Ambient Temperature Range Ordering Information (at rated current I ): -10°C to +40°C r In an ambient temperature (T ) higher than +40°C 10E R 7 M a the maximum operating current (I ) is calculated as o follows: I = I (85-Ta)/45 o r Suffix M – Metric inserts (style 8 only) Available Part Numbers Omit for standard or none C – Ground choke (select models) 1VR1 1ER1 1VR3 1ER3 Input / Output Style 2VR1 2ER1 1 – .250 [6.3] spade terminals 2VR3 2ER3 3 – Wire leads 3VR1 3ER1 6 – Threaded bolt 3VR3 3ER3 7 – IEC inlet* (line side) 3VR7 3ER7 .250 [6.3] spade terminals 3VR7M 3ER7M (load side) 5VR1 5ER1 R Series 5VR3 5ER3 5VR7 5ER7 Leakage current designation 5VR7M 5ER7M E – Low leakage (<0.5 mA) 10VR1 10ER1 V – Standard 10VR3 10ER3 10VR6 10ER7 Current Rating 10VR7 10ER7M 1, 2, 3, 5, 10 or 20A 10VR7M 20ER1 20VR1 20VR6 *IEC 60320-1 C14 inlet mates with C13 connector 61 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change. Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Two-stage General Purpose RFI Power Line Filter (continued) R Series Electrical Schematic Case Styles (continued) R3 LINE LOAD Blue Blue B Brown Brown Green/ A Yellow D E C Case Styles R1 (1, 2, 3, 5, 10A) 10VR6 B B D D E C C E A A R1 (20A) 20VR6 E D B E DB 2.00 50.8 2.00 50.8 A C A C 62 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change. RFI Power Line Filters Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Two-stage General Purpose RFI Power Line Filter (continued) R Series Case Styles Case Dimensions (continued) A B CD E R7 & R7M Part No. Tapped insert 1VR1, 1ER1, 1 2VR1, 2ER1 D B 1VR3, 1ER1, 2VR3, 2ER3 3VR1, 3ER1, A E 5VR1, 5ER1 C 3VR3, 3ER3, 5VR3, 5ER3 3VR7/7M, 3ER7/7M 5VR7/7M, 5ER7/7M 10VR1, 10ER1 10VR3, 10ER3 Recommended Panel Cutout 10VR6 .235 .157 R Dia. (2) 5.96 3.98 10VR7/7M, 10ER7/7M .910 23.11 20VR1, 1.295 20ER1 32.89 1.575 20VR6 40.01 Accessories GA400: NEMA 5-15P to IEC 60320-1 C-13 line cord 63 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change. Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 Two-stage General Purpose RFI Power Line Filter (continued) R Series Performance Data Typical Insertion Loss Measured in closed 50 Ohm system 1ER 3ER 5ER 2ER, 10ER & 20ER db db db db 100 100 100 100 90 90 90 90 80 80 80 80 70 70 70 70 60 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 10 10 0 0 0 0 0.1 1 10 30 0.1 1 10 30 0.1 1 10 30 0.1 1 10 30 Frequency in MHz Frequency in MHz Frequency in MHz Frequency in MHz 1VR 2VR 3VR 5VR db db db db 100 100 100 100 90 90 90 90 80 80 80 80 70 70 70 70 60 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 10 10 0 0 0 0 0.1 1 10 30 0.1 1 10 30 0.1 1 10 30 0.1 1 10 30 Frequency in MHz Frequency in MHz Frequency in MHz Frequency in MHz 10VR 20VR db db 100 100 90 90 80 80 Common Mode / Asymmetrical (L-G) 70 70 Differential Mode / Symmetrical (L-L) 60 60 50 50 40 40 30 30 20 20 10 10 0 0 0.1 1 10 30 0.1 1 10 30 Frequency in MHz Frequency in MHz Minimum Insertion Loss Measured in closed 50 Ohm system Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) 64 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change.
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 2ER1?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods