Electronics Finder

Description

Reed Relay 24VDC 2.2KOhm 0.5A SPDT(19.56x8.22x8)mm THT Dry
3-1393771-1

Part Number

3-1393771-1

Price

Request Quote

Manufacturer

TE CONNECTIVITY

Lead Time

Request Quote

Category

Relays and I/O Modules » Reed Relays

Specifications

Manufacturer

TE Connectivity

Manufacturers Part #

3-1393771-1

Industry Aliases

JWD-172-8

Sub-Category

Reed Relays

Brand

AMP

Packaging

Box|Bundle|Tray

Factory Pack Quantity

Datasheet

DDEController?Action=showdoc&DocId=Data+Sheet%7F1308242_JWD-JWS%7F0712%7Fpdf%7FEnglish%7FENG_DS_1308242_JWD-JWS_0712.pdf

405 KiB

Download

Extracted Text

Signal Relays Potter & Brumfield JWD/JWS Series Reed Relays n JWD has dual in-line package (DIP) configuration (14-pin DIP) n JWS has single in-line package (SIP) configuration n Low cost, dry reed reliability with various contact arrangements n Wave solderable and immersion cleanable molded epoxy package n Optional coil suppression diode Typical applications Telecommunications, measurement and control, automated test equipment, security systems, medical equipment. UC Approvals Coil Data UL E29244, CSA LR81479 Coil voltage range 5 to 24VDC Technical data of approved types on request Min./Max. energization duration continuous Max. coil temperature 105º C Contact Data Thermal resistance approximately 100ºC/W Contact arrangement Coil insulation system according UL class A JWD and JWS 1 form A (NO) contact JWD only 1 form B (NC), 1 form C (CO), 2 form A (NO) Insulation Data Rated voltage Initial dielectric strength 1 form A, 1 form B and 2 form A 20VDC, 500mA between open contacts 1 form C (CO) 10 VDC, 500mA and 10VDC, 10mA form A (NO) and form B (NC) 250VDC, Max. switching voltage form C (CO) 175VDC 1 form A, 1 form B and 2 form A 100VDC between contact and coil 500VDC 1 form C (CO) 28VDC between adjacent contacts Rated current 2 form A (NO) of JWD only 500VDC 1 form A, 1 form B and 2 form A 500mA, 20VDC Initial insulation resistance 10 1 form C (CO) 500mA, 10VDC between insulated elements 10 Ω at 100VDC Limiting making current 500mA Capacitance between open contacts typ. 0.5pF Limiting breaking current 500mA Switching power form A (NO) and form B (NC) 10W Other Data form C (CO) 3W Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content Contact material Ruthenium refer to the Product Compliance Support Center at Min. recommended contact load 10mV, 10mA www.te.com/customersupport/rohssupportcenter Minimum switching voltage 10mV Ambient temperature -35ºC to +85ºC Initial contact resistance 200mΩ max. at 10mA, 6VDC Category of environmental protection Frequency of operation 100Hz IEC 61810 RTIII -wash tight Operate/release time max., incl. bounce Vibration resistance (functional) 20g, 10 to 2000 Hz form A (NO) and form B (NC) 1.5/0.5ms Shock resistance (functional), 3 planes, half sine pulse, 8ms form C (CO) 1.5/3.0ms form A (NO) 100g Electrical endurance form B (NC) and form C (CO) 50g form A (NO) and form B (NC), resistive load, +25°C Terminal type PCB-THT 6 20VDC, 500mA 1x10 ops. Mounting position any 6 20VDC, 250mA 20x10 ops. Weight approximately 2.3g ( 0.08 oz.) 6 5VDC, 1mA 100x10 ops. Resistance to soldering heat THT form C (CO) contact, resistive load, +25°C IEC 60068-2-20, wave solder max. 260ºC/10s 6 10VDC, 500mA 1x10 ops. Ultrasonic cleaning no 6 10VDC, 250mA 20x10 ops. Conformal coating yes 6 5VDC, 1mA 100x10 ops. Packaging/unit tray/50 pcs., Contact ratings bundle/250 pcs., 1 form A, 1 form B and 2 form A 500mA, 20VDC box/500 pcs. 1 form C (CO) 500mA, 10VDC 6 Mechanical endurance 100x10 operations 1 07-2012, Rev. 0712 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions Signal Relays Potter & Brumfield JWD/JWS Series Reed Relays (Continued) Terminal assignment Dimensions TOP view on component side of PCB Dia. 1 Dia. 2 Dia. 3 Dia. 4 JWD Series 7 6+21 76 +2 1 76 +2 1 7 6+21 .770 MAX. .300 MAX. (19.56) (7.62) .130 ± .015 MAGNET .315 (8.0) MAX. (3.3 ± 0.4) 12 67 89 1314 89 1314 89 1314 89 1314 WITH TERMINALS VERTICAL 7 6+21 7 21 .020 TYP . (.51) .100 TYP . .600 4° MAX. .012 TYP . (2.54) (15.24) TYP . (.3) 89 1314 89 1314 1+35 7 Dia. 5 Dia. 6 Dia. 7 JWS Series Note: Terminal numbers are for reference only and do not appear on relays. .260 MAX. .800 MAX. (20.32) (6.6) .307 MAX. (7.8) 1 35 7 .018 TYP . .020 TYP . .010 TYP . (.46) (.51) (.25) Note: Magnetic shielding may be required between relays when they are .125 ± .010 .200 TYP . placed in very close proximity to one another. (5.08) (3.18 ± .254) Product code Contacts Max. Diode Coil Coil Operate Coil Wiring Part number 1) rating voltage resistance voltage power diagram JWD-107-1 1 form A, 10W No 5/6VDC 500ohm 3.8VDC 50/72mW 1 1393771-3 JWD-107-5 1 NO contact Yes 5/6VDC 500ohm 3.8VDC 50/72mW 1 1393771-5 JWD-107-3 No 12VDC 1200ohm 9.6VDC 120mW 1 1393771-4 JWD-107-7 Yes 12VDC 1200ohm 9.6VDC 120mW 1 1393771-6 JWD-171-5 No 24VDC 2150ohm 19.2VDC 268mW 2 2-1393771-0 JWD-171-10 Yes 24VDC 2150ohm 19.2VDC 268mW 2 1393771-7 JWD-171-21 2 form A, No 5/6VDC 200ohm 3.8VDC 125/180mW 3 1-1393771-4 JWD-171-25 2 NO contacts Yes 5/6VDC 200ohm 3.8VDC 125/180mW 3 1-1393771-7 JWD-171-23 No 12VDC 500ohm 9.6VDC 288mW 3 1-1393771-5 JWD-171-27 Yes 12VDC 500ohm 9.6VDC 288mW 3 1-1393771-8 JWD-171-24 No 24VDC 2200ohm 19.2VDC 262mW 3 1-1393771-6 JWD-171-28 Yes 24VDC 2200ohm 19.2VDC 262mW 3 1-1393771-9 JWD-171-12 1 form B, No 5/6VDC 500ohm 3.8VDC 50/72mW 4 1393771-8 JWD-171-17 1 NCO contact Yes 5/6VDC 500ohm 3.8VDC 50/72mW 4 1-1393771-1 JWD-171-14 No 12VDC 1200ohm 9.6VDC 120mW 4 1393771-9 JWD-171-19 Yes 12VDC 1200ohm 9.6VDC 120mW 4 1-1393771-2 JWD-171-15 No 24VDC 2200ohm 19.2VDC 262mW 4 1-1393771-0 JWD-171-20 Yes 24VDC 2200ohm 19.2VDC 262mW 4 1-1393771-3 JWD-172-1 1 form C, 3W No 5/6VDC 200ohm 3.8VDC 125/180mW 5 2-1393771-1 JWD-172-5 1 CO contact Yes 5/6VDC 200ohm 3.8VDC 125/180mW 5 2-1393771-9 JWD-172-3 No 12VDC 500ohm 9.6VDC 288mW 5 2-1393771-7 JWD-172-7 Yes 12VDC 500ohm 9.6VDC 288mW 5 3-1393771-0 JWD-172-4 No 24VDC 2200ohm 19.2VDC 262mW 5 2-1393771-8 JWD-172-8 Yes 24VDC 2200ohm 19.2VDC 262mW 5 3-1393771-1 JWD-172-155 No 5/6VDC 200ohm 3.8VDC 125/180mW 6 2-1393771-2 JWD-172-159 Yes 5/6VDC 200ohm 3.8VDC 125/180mW 6 2-1393771-4 JWD-172-161 Yes 12VDC 1000ohm 9.6VDC 144mW 6 2-1393771-5 JWD-172-158 No 24VDC 2150ohm 19.2VDC 268mW 6 2-1393771-3 JWD-172-162 Yes 24VDC 2150ohm 19.2VDC 268mW 6 2-1393771-6 JWS-117-1 1 form A, 10W No 5VDC 500ohm 3.8VDC 50mW 7 3-1393771-2 JWS-117-6 1 NO contact Yes 5VDC 500ohm 3.8VDC 50mW 7 3-1393771-8 JWS-117-3 No 12VDC 530ohm 9.6VDC 272mW 7 3-1393771-4 JWS-117-8 Yes 12VDC 530ohm 9.6VDC 272mW 7 3-1393771-6 JWS-117-18 Yes 12VDC 1850ohm 9.6VDC 78mW 7 3-1393771-3 JWS-117-5 No 24VDC 2150ohm 19.2VDC 268mW 7 3-1393771-5 1) Coil resistance ±10%. 2 07-2012, Rev. 0712 Datasheets and product specification Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com according to IEC 61810-1 and to be used terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, only together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company http://relays.te.com/definitions

Frequently asked questions

Electronics Finder' parent company, GID Industrial, specializes in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. We stand apart from our competition through our commitment to quality, and look forward to the opportunity to show you how.

The warranty we offer will be based on what we negotiate with our suppliers. Sometimes, a part will be sold as-is and without a warranty. We usually offer a one-year warranty for single board computers in particular because they are our specialty.

We use FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. We are able to ship with other carriers if you would find it more convenient.

Electronics Finder will definitely serve you. We work with international clients all the time, which means we are regularly shipping goods all across the globe.

Visa, MasterCard, Discover, and American Express are all accepted by Electronics Finder. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may be offered (upon approval) for larger orders.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products