TE CONNECTIVITY 3-1534796-5

8 7 6 5 4 3 2 1 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION 2001 LOC DIST REVISIONS ALL RIGHTS RESERVED. COPYRIGHT 2001 - C P LTR DESCRIPTION DATE DWN APVD AI - D43 ECR-18-005675 25APR2018 KD FL +0.1 D44 ECR-18-007020 08MAY2018 B LZ FL -0.2 D45 ECR-18-008502 07JUN2018 KD FL A 2.5 7.3 D D 2 1 SECTION A-A C C 1 5.25 13 6.6 SECTION B-B WITH SPECIAL CHAIN FEATURE 25 24 SIDE KEYING ON LAST CAVITY, THICK-1,5mm - 23 SIDE KEYING, THICK, ON CAVITY No.1 19 COLOR MARKING IN THIS AREA. COLOR SEE TABLE 18 SLOT FOR KEYING, SLIM, BETWEEN POSITION 17 SLOT FOR KEYING, THICK, BETWEEN POSITION 16 KEYING, THICK, BETWEEN POSITION 15 COLOR CODE 14 TE LOGO 13 B B 12 PRELIMINARY PART NOT RELEASED FOR PRODUCTION KEYING, SLIM, BETWEEN POSITION 11 SLOT FOR SIDE KEYING, ON LAST CAVITY 10 Schlitz fuer Seitenkodierung, an letzter Kammer SIDE KEYING, SLIM, ON LAST CAVITY 9 Seitenkodierung, an letzter Kammer INCLUSIVE COPPER CLOADING 8 Inklusive Kupferkaschierung PCB PREFERABLY CHAMPFERED 7 Leiterplatte vorzugsweise angefast SLOT FOR SIDE KEYING, ON CAVITY NO 1 6 Schlitz fuer Seitenkodierung, an Kammer 1 SIDE KEYING, ON CAVITY NO. 1 18 5 Seitenkodierung, an Kammer Nr. 1 WIRE RANGE: 0.22-0.35mm² SEE APPLICATION SPEC. 114-18467 4 Drahtgroeßenbereich: 0.22-0.35mm² siehe Verarbeitungsspec. 114-18467 IEC60695-2-11 / IEC60335-1 GLOWWIRE TEST 750°C WITHOUT FLAME 3 IEC60695-2-11 / IEC60335-1 Gluehdrahttest 750°C ohne Flamme MATING PART: PCB (WITH FRAMES ACC. RAST 2.5 E.G. PN 964 575/576) TABHEADER PN 829 866/867 2 Passender Gegenstecker: Leiterplatten (mit Rahmen nach RAST 2.5 z.B. 964 575/576) Tabwannen Nr. 829 866/867 KEYING RIBS; CUTTING WITH TERMINATION MACHINE POSSIBLE 1 Kodierrippe; Schneiden auf der Verarbeitungsmaschine moeglich A A DWN 24MAY2002 THIS DRAWING IS A CONTROLLED DOCUMENT. H. Karabiyik TE Connectivity CHK 24MAY2002 B. Schnaubelt DIMENSIONS: TOLERANCES UNLESS APVD NAME OTHERWISE SPECIFIED: 24MAY2002 T. Klenner mm AMP DUOPLUG 2.5 MARK II 9 PRODUCT SPEC 0 PLC 0.2 FEMALE CONNECTOR 2-20 POSITION 1 PLC 0.2 108-18785 5 2 PLC 0.2 - 3 PLC APPLICATION SPEC - 4 PLC - SIZE CAGE CODE DRAWING NO RESTRICTED TO ANGLES 114-18467 1
$ MATERIAL FINISH WEIGHT 00779 1534796 - - - - A1 - - SCALE SHEET OF REV Customer Drawing 5:1 1 4 D45 4805 (3/11) 2.2 2.2 (13.85) 10.8 10.05 10.8 8 7 6 5 4 3 2 1 2001 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION LOC DIST REVISIONS ALL RIGHTS RESERVED. 2001 - COPYRIGHT C AI - P LTR DESCRIPTION DATE DWN APVD SEE SHEET 1 D D PART NUMBERS LOADED WITH TIN PLATED CONTACTS (2-9 POSITION) 9 20 24.9 2/3 5-1534796-9 9 20 24.9 4/5 2-1534796-9 12 9 20 24.9 3-1534796-9 9 20 24.9 X 3/4 4-1534796-9 12 Brown 8 17.5 22.4 2/3 9-1534796-8 8 17.5 22.4 X 3/4 8-1534796-8 8 17.5 22.4 3/4 X 7-1534796-8 8 17.5 22.4 3/4 6-1534796-8 8 17.5 22.4 X 5-1534796-8 PART NUMBERS LOADED WITH TIN PLATED CONTACTS (10-20 POSITION) 8 17.5 22.4 3-1534796-8 8 17.5 22.4 5/6 2-1534796-8 12 20 47.5 52.4 3-1534797-0 12 7 15 19.9 2/3 7-1534796-7 C C 12 19 45 49.9 5-1534797-9 BLUE 7 15 19.9 2/3 6-1534796-7 19 45 49.9 4-1534797-9 12 BLUE 7 15 19.9 X 2/3 4-1534796-7 19 45 49.9 3-1534797-9 12 7 15 19.9 5/6 5-1534796-7 16 37.5 42.4 3-1534797-6 7 15 19.9 3-1534796-7 15 35 39.9 3-1534797-5 6 12.5 17.4 2/3 X X 9-1534796-6 12 14 32.5 37.4 3-1534797-4 6 12.5 17.4 1/2 8-1534796-6 12 13 30 34.9 3-1534797-3 6 12.5 17.4 3/4 7-1534796-6 12 12 12 27.5 32.4 11/12 5-1534797-2 6 12.5 17.4 2/3 6-1534796-6 12 12 27.5 32.4 X 4-1534797-2 12 BLUE 6 12.5 17.4 4/5 2-1534796-6 12 27.5 32.4 3-1534797-2 12 6 12.5 17.4 4/5 5-1534796-6 10/11 12 6 12.5 17.4 X 4-1534796-6 12 27.5 32.4 X X 2-1534797-2 2/3 6 12.5 17.4 3-1534796-6 11 25 29.9 5/6 7-1534797-1 12 12 5 10 14.9 4/5 8-1534796-5 12 11 25 29.9 10/11 6-1534797-1 5 10 14.9 1/2 9-1534796-5 11 25 29.9 10/11 X 5-1534797-1 12 5 10 14.9 1/2 4-1534796-5 12 11 25 29.9 9/10 4-1534797-1 GREEN 5 10 14.9 3/4 7-1534796-5 12 11 25 29.9 3-1534797-1 BROWN 5 10 14.9 2/3 6-1534796-5 12 10 22.5 27.4 2/3 6-1534796-0 12 5 10 14.9 X 5-1534796-5 12 10 22.5 27.4 8/9 4-1534796-0 B 5 10 14.9 3-1534796-5 B 10 22.5 27.4 3-1534796-0 BROWN 5 10 14.9 1/2 0-1534796-5 12 10 22.5 27.4 7/8 7-1534796-0 4 7.5 12.4 X 0-2825353-4 12 COLOR 24 15 5 19 11 9 RED 4 7.5 12.4 9-1534796-4 POS. DIM A DIM B TE P/N 20 14 CODE KEYING KEYING KEYING KEYING KEYING KEYING BLACK 4 7.5 12.4 2/3 8-1534796-4 12 2 CONTACT CuSn TINNED BLACK 4 7.5 12.4 X 2/3 2-1534796-4 SEE TABLE 12 1 HOUSING HIGH TEMP PLASTIC NATUR 3 BLACK 4 7.5 12.4 3/4 5-1534796-4 SL NO PN DESCRIPTION MATERIAL COLOUR/FINISH 4 7.5 12.4 1/2 6-1534796-4 4 7.5 12.4 X 1/2 1534796-4 12 4 7.5 12.4 3/4 7-1534796-4 12 4 7.5 12.4 X 4-1534796-4 4 7.5 12.4 3-1534796-4 RED 3 5 9.9 2/3 2-1534796-3 3 5 9.9 X 8-1534796-3 12 RED 3 5 9.9 2/3 9-1534796-3 PART NUMBERS LOADED WITH SILVER PLATED CONTACTS 3 5 9.9 2/3 6-1534796-3 3 5 9.9 1/2 7-1534796-3 20 47.5 52.4 1-2319614-0 13 30 34.9 2319614-3 3 5 9.9 2/3 X 4-1534796-3 12 12 9 20 24.9 2319613-9 3 5 9.9 3-1534796-3 12 A A 6 12.5 17.4 2319613-6 2 2.5 7.4 1/2 1-1534796-2 12 12 DWN 24MAY2002 THIS DRAWING IS A CONTROLLED DOCUMENT. 2 2.5 7.4 1534796-2 2 2.5 7.4 2319613-2 H. Karabiyik 12 TE Connectivity CHK 24MAY2002 B. Schnaubelt COLOR DIMENSIONS: TOLERANCES UNLESS COLOR 24 15 5 19 11 9 5 APVD NAME 24 19 15 11 9 OTHERWISE SPECIFIED: 24MAY2002 POS. DIM A DIM B TE P/N POS. DIM A DIM B TE P/N CODE 20 T. Klenner mm AMP DUOPLUG 2.5 MARK II 14 CODE 14 KEYING KEYING KEYING KEYING KEYING KEYING KEYING KEYING KEYING KEYING KEYING KEYING PRODUCT SPEC 0 PLC 0.2 FEMALE CONNECTOR 2-20 POSITION 0.2 1 PLC 108-18785 2 PLC 0.2 2 CONTACT CuSn TINNED 2 CONTACT CuSn SILVERED - 3 PLC - APPLICATION SPEC SEE TABLE SEE TABLE - 4 PLC SIZE CAGE CODE DRAWING NO RESTRICTED TO 1 HOUSING HIGH TEMP PLASTIC NATUR 1 HOUSING HIGH TEMP PLASTIC NATUR 114-18467 ANGLES 1
$ 3 3 MATERIAL FINISH WEIGHT 00779 1534796 - - - - A1 - - SL NO PN DESCRIPTION MATERIAL COLOUR/FINISH SL NO PN DESCRIPTION MATERIAL COLOUR/FINISH SCALE SHEET OF REV Customer Drawing 5:1 2 4 D45 4805 (3/11) 8 7 6 5 4 3 2 1 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION 2001 LOC DIST REVISIONS ALL RIGHTS RESERVED. COPYRIGHT 2001 - C P LTR DESCRIPTION DATE DWN APVD AI - - SEE SHEET 1 - - - KEYING PLAN (EXAMPLES) Kodierschema (Beispiele) 1534796-2 12 2319613-2 7-1534796-4 14 PCB LAYOUT KEYED / CONNECTED ONLY WITH ADDIONAL FRAME 12 2-1534796-3 1-1534796-2 12 14 4-1534796-3 11 12 8-1534796-3 7-1534796-3 Leiterplattenanschluss kodiert / nur in Verbindung mit zusaetzlichem Rahmen 11 5 5 6-1534796-3 14 9-1534796-3 11 11 A 11 15 1.4 0.08 5-1534796-4 2825353-4 2.5 0.1 8-1534796-4 14 12 9 12 12 5 5-1534796-5 14 6-1534796-4 15 15 12 146-1534796-5 7-1534796-5 15 4-1534796-5 15 9-1534796-5 12 15 11 19 D D 24 6 15 4-1534796-6 3-1534796-6 (KEYED) 10 6-1534796-7 5-1534796-7 (WITHOUT KEYING) 11 12 6-1534796-6 a b c d e f g 5-1534796-6 11 a b c d e f g 12 14 7 5 11 2-1534796-6 15 7-1534796-7 15 11 +0.1 5-1534796-8 +0.1 9 0.6 8 1.6 1.5 0.14 5-1534797-1 (KEYED) 12 8-1534796-8 7-1534796-8 6-1534796-8 +0.1 6-1534796-0 5 11 a b c d e f g h i 2.55 1.55 11 Freimasstoleranz
#0.1 SCALE 5:1 11 5 11 5 11 PCB LAYOUT FOR KEYING BETWEEN POSITION C C 6-1534796-5 6-1534796-3 2-1534796-3 5-1534796-4 6-1534796-4 7-1534796-4 7-1534796-3 12 9-1534796-3 16 5-1534796-4 16 16 16 16 16 8-1534796-4 12 17 16 17 +0.1 0.9
#0.1 0.9
#0.1 0.6 0.9
#0.1 12 4-1534796-5 6-1534796-6 12 7-1534796-6 12 17 2-1534796-6 12 16 12 12 4-1534796-0 7-1534796-7 5-1534796-7 17 17 16 17 11 B B 17 5-1534796-6 12 6-1534796-7 17 4-1534797-1 12 17 5-1534797-1 6 7-1534796-0 6-1534796-0 12 12 A A DWN 24MAY2002 THIS DRAWING IS A CONTROLLED DOCUMENT. H. Karabiyik TE Connectivity CHK 24MAY2002 B. Schnaubelt DIMENSIONS: TOLERANCES UNLESS APVD NAME OTHERWISE SPECIFIED: 24MAY2002 T. Klenner mm AMP DUOPLUG 2.5 MARK II PRODUCT SPEC 0 PLC 0.2 FEMALE CONNECTOR 2-20 POSITION 1 PLC 0.2 108-18785 2 PLC 0.2 - 3 PLC APPLICATION SPEC - 4 PLC - SIZE CAGE CODE DRAWING NO RESTRICTED TO ANGLES 114-18467 1
$ 17 17 MATERIAL FINISH WEIGHT 17 00779 1534796 - - - - A1 - - SCALE SHEET OF REV Customer Drawing 5:1 3 4 D45 4805 (3/11) 60
$ 60
$ 1 +0.5 5.5 8 7 6 5 4 3 2 1 THIS DRAWING IS UNPUBLISHED. RELEASED FOR PUBLICATION 2001 LOC DIST REVISIONS ALL RIGHTS RESERVED. COPYRIGHT 2001 - C P LTR DESCRIPTION DATE DWN APVD AI - - SEE SHEET 1 - - - D D 22 21 0.7 0.5 22 KEYING KEYING 21 C C GWT 750C AND UL V0 VERSION 14 32.5 37.4 2304526-4 12 12 27.5 32.4 2304526-2 12 10 22.5 27.4 1-2304525-0 12 Blue 8 17.5 22.4 - - - - 2-2304525-8 12 8 17.5 22.4 - - - - 1-2304525-8 12 Brown 8 17.5 22.4 - - - 2/3 2304525-8 12 7 15 19.9 - - - - 2304525-7 12 Black 6 12.5 17.4 - - - - 4-2304525-6 12 Red 6 12.5 17.4 - - - 2/3 2-2304525-6 12 6 12.5 17.4 - - - - 1-2304525-6 12 KEYING. SPECIAL THICK. BETWEEN POSITION 22 Blue 6 12.5 17.4 - - - 4/5 2304525-6 12 KEYING. SPECIAL THIN. BETWEEN POSITION 21 5 10 14.9 1/2 - - 4-2304525-5 12 SLOT FOR KEYING SPECIAL. BETWEEN POSITION 20 5 10 14.9 - - - - 3-2304525-5 12 RECOMMENDED PCB CUTOFF DIMENSION FOR THE KEYING SPECIAL. BETWEEN POSITION 19 Green 5 10 14.9 - - - 3/4 2-2304525-5 12 Brown 5 10 14.9 - - - 2/3 1-2304525-5 12 5 10 14.9 - - - - 2304525-5 12 19 Black 4 7.5 12.4 - 3/4 - - 4-2304525-4 12 B B Blue 4 7.5 12.4 - - - - 3-2304525-4 12 4 7.5 12.4 - - - - 2-2304525-4 12 Brown 4 7.5 12.4 - - - 1/2 1-2304525-4 12 20 1.25
#0.05 Black 4 7.5 12.4 - - - 3/4 2304525-4 12 0 -0.2 0.9 Red 3 5 9.9 2/3 3-2302525-3 12 3 5 9.9 X 2-2302525-3 12 3 5 9.9 - - - - 1-2304525-3 12 Black 3 5 9.9 - - 1/2 - 2304525-3 12 Color POS. 15 21 PN 11 22 5 25 14 DIM A DIM B Code Polzahl Bestell-Nr. KEYING KEYING KEYING KEYING KEYING A A DWN 24MAY2002 THIS DRAWING IS A CONTROLLED DOCUMENT. H. Karabiyik TE Connectivity CHK 24MAY2002 B. Schnaubelt DIMENSIONS: TOLERANCES UNLESS APVD NAME OTHERWISE SPECIFIED: 24MAY2002 T. Klenner mm AMP DUOPLUG 2.5 MARK II PRODUCT SPEC 0 PLC 0.2 FEMALE CONNECTOR 2-20 POSITION 1 PLC 0.2 108-18785 2 PLC 0.2 - 3 PLC APPLICATION SPEC - 4 PLC - SIZE CAGE CODE DRAWING NO RESTRICTED TO ANGLES 114-18467 1
$ MATERIAL FINISH WEIGHT 00779 1534796 - - - - A1 - - SCALE SHEET OF REV Customer Drawing 5:1 4 4 D45 4805 (3/11) +0.1 0 5.1