TE CONNECTIVITY 30AYP6C
Specifications
Manufacturer
TE Connectivity
Manufacturers Part #
30AYP6C
Industry Aliases
6609072-2, 30AYP6C
Sub-Category
Power Line Filters
Brand
Corcom
Factory Pack Quantity
1
Datasheet
DDEController?Action=srchrtrv&DocNm=1654001_CORCOM_PRODUCT_GUIDE_A_SERIES&DocType=Catalog+Section&DocLang=English.pdf
179 KiB
Extracted Text
Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 High Performance 3-phase RFI Filters for WYE Applications A Series UL Recognized CSA Certified VDE Approved A Series Specifications Maximum leakage current, each Line to Ground: • For 3-phase, four wire, WYE Applications @ 120 VAC 60 Hz: 1.4 mA • Filters each of the three lines plus the neutral and @ 250 VAC 50 Hz: 3.4 mA ground line Hipot rating (one minute): • Both common mode and differential mode Line to Ground: 1500 VAC suppression from 50kHz to 30MHz Neutral to Ground: 1500 VAC • Effective for both balanced and unbalanced loads Line to Neutral: 1450 VDC • Ground choke included Rated Voltage (max): Phase to Phase: 440 VAC • Optional end bell kits available to shield input and Phase to Neutral / Ground: 250 VAC output terminals Operating Frequency: 50/60 Hz • AYP single stage for lower noise environments • AYT dual stage provides highest performance Rated Current: 20 to 60A Operating Ambient Temperature Range (at rated current I ): -10°C to +40°C r In an ambient temperature (T ) higher than +40°C a the maximum operating current (I ) is calculated as o follows: I = I (85-Ta)/45 Ordering Information o r 45 AYT 6 C Electrical Schematics Suffix AYP6C Models C – Ground Choke LINE LOAD AA Input / Output Style 6 – Threaded 1/4 – 20 bolt B B Series designation AYP – Single Stage AYT – Dual Stage C C Current Rating N N 20, 30, 45 or 60A LINE LOAD GND GND 98 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change. Three Phase Filters Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 High Performance 3-phase RFI Filters for WYE Applications (continued) A Series Electrical Schematics Case Style (continued) AYT6C Models A C LINE LOAD E A A B B C C D B N N LINE LOAD 2 GND GND Available Part Numbers Terminals: Mounting studs: 1/4 x 20 (10) No. 8-32 (8) 20AYP6C 20AYT6C 56 lbf-in ± 2 Torque: 30AYP6C 30AYT6C 6.33 N-m ±.23 45AYP6C 45AYT6C 60AYP6C 60AYT6C Accessories Mounting bracket kit with captive nuts: AA400: 20A & 30A versions Case Dimensions AA405: 45A & 60A versions A* B C D E AA406A Part No. AA407A 20AYP6C AA405 30AYP6C AA400 Protective cover for use with mounting bracket: 45AYP6C (For Europe only. Limited availability in other regions) AA406A: 20A & 30A versions 60AYP6C AA407A: 45A & 60A versions End bell kit (bracket and cover) with captive nuts: 20AYT6C AA406: 20A & 30A versions AA407: 45A & 60A versions 30AYT6C AA406 / AA407 45AYT6C Kits includes both bracket and cover 60AYT6C Additional captive nuts: AA401: 10 nuts 99 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change. Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 High Performance 3-phase RFI Filters for WYE Applications (continued) A Series Performance Data Typical Insertion Loss Measured in closed 50 Ohm system 20AYP6C 30AYP6C 45AYP6C 60AYP6C db db db db 100 100 100 100 90 90 90 90 80 80 80 80 70 70 70 70 60 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 10 10 0 0 0 0 0.01 0.1 0.15 1 10 30 0.01 0.1 0.15 1 10 30 0.01 0.1 0.15 1 10 30 0.01 0.1 0.15 1 10 30 Frequency in MHz Frequency in MHz Frequency in MHz Frequency in MHz 20AYT6C 30AYT6C 45AYT6C 60AYT6C db db db db 100 100 100 100 90 90 90 90 80 80 80 80 70 70 70 70 60 60 60 60 50 50 50 50 40 40 40 40 30 30 30 30 20 20 20 20 10 10 10 10 0 0 0 0 0.01 0.1 0.15 1 10 30 0.01 0.1 0.15 1 10 30 0.01 0.1 0.15 1 10 30 0.01 0.1 0.15 1 10 30 Frequency in MHz Frequency in MHz Frequency in MHz Frequency in MHz Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Minimum Insertion Loss Measured in closed 50 Ohm system AYP6C Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) AYT6C Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) 100 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change.
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 30AYP6C?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods