TE CONNECTIVITY 3VAQ3
Specifications
Manufacturer
TE Connectivity
Manufacturers Part #
3VAQ3
Industry Aliases
6609057-1, 3VAQ3
Sub-Category
Power Line Filters
Brand
Corcom
Factory Pack Quantity
6
Datasheet
DDEController?Action=srchrtrv&DocNm=1654001_CORCOM_PRODUCT_GUIDE_AQ_SERIES&DocType=Catalog+Section&DocLang=English.pdf
225 KiB
Extracted Text
Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 High Frequency Power Line Filter or Power Entry Module AQ Series UL Recognized CSA Certified 3VAQ8F 6VAQ8F AQ Series Specifications • Low cost solution to power line noise at high Maximum leakage current each Line to Ground: 3A Models 6A Models frequencies @ 120 VAC 60 Hz: 1.2 mA .7 mA • High common and differential mode performance @250 VAC 50 Hz: 2.3 mA 1.2 mA from 10kHz to 1GHz Hipot rating (one minute): • Available with an IEC inlet, fuseholder and switch Line to Ground: 2250 VDC • Suitable for applications where computers are Line to Line: 1450 VDC used to process secret or confidential information Rated Voltage (max): 250 VAC Operating Frequency: 50/60 Hz Ordering Information Rated Current: 3 or 6A 3 V AQ 8 FS Operating Ambient Temperature Range (at rated current I ): -10°C to +40°C r Suffix In an ambient temperature (T ) higher than +40°C a F – Fuseholder the maximum operating current (I ) is calculated as o FS – Fuseholder & Switch follows: I = I (85-Ta)/45 o r (F & FS on VAQ8 only) Electrical Schematics Omit if none 3A Models Input / Output Style LINE LOAD 3 – Wire leads 8 – IEC inlet* (line side) Wire leads (load side) 6A Models AQ Series LINE LOAD Leakage current designation V – Standard Current Rating 3 or 6A Accessories GA400: NEMA 5-15P to IEC 60320-1 C-13 line cord Available Part Numbers 3VAQ3 6VAQ3 3VAQ8F 6VAQ8F 3VAQ8FS 6VAQ8FS *IEC 60320-1 C14 inlet mates with C13 connector 12 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change. RFI Power Line Filters Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 High Frequency Power Line Filter or Power Entry Module (continued) AQ Series Case Styles and Dimensions 3VAQ3 6VAQ3 1 1.66 ± .015 2.46 C 2.572 L C L 42.1 ± .38 62.3 65.3 5.126 12.0 Min. 4.14 12.0 Min. 130.0 304.8 105.1 304.8 5.327±.015 (5 places) 4.36 ± .015 135.3 .515 111.4 ± .38 #6-32 .515 13.08 (2 places) #6-32 Thd. 13.08 .5 ± .01 1.0 ± 0.1 #6-32 (2 x) #6-32 12.7 ± .25 25.4 ± .25 3.061 2.0 ± .01 1.98 77.8 50.8 ± .25 40.1 .78 .50 ± .02 12.7 ± .5 19.8 3VAQ8F 6VAQ8F 5.96 6.457 152.0 164 5.68 ± .01 5.06 ± .015 44.3 ± .25 128.6 ± .38 4.0 ± .01 102 ± .25 2.35 ± .015 .90 59.6 ± .38 22.9 2.328 ± .01 3.062 1.125 ± .01 59 ± .35 77.8 2.48 1.58 ±.015 28.6 ± .25 .958 63.0 40 ± .38 24.3 .355 #6-32 .354 ±.010 .391 ± .01 ref ref (6) inserts 9.02 8.99 ± .25 9.93 ± .25 #6-32 .411 ref (6) inserts 12.0 Min. 10.4 12.0 Min. 305.0 305.0 2.576 1.62 65.4 41.2 .375 ± .125 .375 ± .125 9.53 ± 3.2 9.53 ± 3.2 3VAQ8FS 6VAQ8FS 7.125 5.39 ± .015 181.0 .172 136.9 ± .38 1.058 6.347 ± .015 4.37 26.9 2.35 ± .015 161.2 ± .38 #6-32 59.6 ± .38 4.0 ± .015 (6) inserts 101.55 ± .25 .44 11.2 2.48 1.575 ± .015 .958 63.0 2.33 ±.015 40.01 ± .38 3.07 24.3 1.52 ± .01 59.0 ± .38 77.8 38.5 ± .25 #6-32 .411 ref (6) inserts .364 10.4 1.12 ± .01 .391 ± .01 .375 ± .125 9.25 28.3 ± .25 9.93 ± .25 9.53 ± 3.2 12.0 Min. 1.62 304.8 41.2 2.58 65.4 6.30 12.0 Min. .375 ± .125 305.0 160.0 9.53 ± 3.2 13 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change. Catalog: 1654001 Corcom Product Guide Issue Date: 06.2011 High Frequency Power Line Filter or Power Entry Module (continued) AQ Series Recommended Panel Cutouts .910 ± .005 .855 ± .005 23.11 ± .13 .235 ± .005 21.72 ± .13 R 5.969 ± .13 .620 ± .005 15.75 ± .13 1.295 ± .005 32.89 ± .13 .620 ± .005 Dia. 15.75 ± .13 Performance Data Typical Insertion Loss Measured in closed 50 Ohm system 3VAQ 6VAQ db db 100 100 90 90 80 80 70 70 60 60 50 50 40 40 30 30 20 20 10 10 0 0 0.01 0.1 1 10 100 1000 0.01 0.1 1 10 100 1000 Frequency in MHz Frequency in MHz Common Mode / Asymmetrical (L-G) Differential Mode / Symmetrical (L-L) Minimum Insertion Loss Measured in closed 50 Ohm system Common Mode / Asymmetrical (Line to Ground) Differential Mode / Symmetrical (Line to Line) 14 Dimensions are in inches and millimeters unless otherwise specified. Values in italics For email, phone or live chat, please go to te.com/help are metric equivalents. Dimensions are shown for reference purposes only. corcom.com Specifications subject to change.
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 3VAQ3?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods