TE CONNECTIVITY 4-1618240-2

KILOVAC High Voltage Relays KILOVAC High Voltage Relays K43 Series Make & Break Load Switching — 10 kV Relays K43A and K43B Product Facts for K43A and K43B n 10 kV, 25 Amps continuous current relay n RF ratings to 32 MHz n Vacuum dielectric for power switching low current loads n 2 million cycle mechanical life n QPL versions available, M83725/17 & M83725/10 K43C Product Facts for K43C n SPDT version of K43 n Vacuum dielectric for power switching low current loads n Flange mounting available n Carries 10 Amps at 32 MHz n Meets requirements of MIL-R-83725 n QPL version available, M83725/16 For factory-direct application assistance, dial 800-253-4560, ext. 2055, or 805-220-2055. Contact Resistance, Max. — Product Specifications for Coil Data 0.02 ohm K43A, K43B and K43C Volts, Nominal DC 12 V 26.5 V 115 V Operate Time, Max. — 10 ms Contact Arrangement — Pickup, Max. 8 Vdc 16 Vdc 80 Vdc K43A — SPST-NO Release Time, Max. — 10 ms Dropout .5-5 Vdc 1-10 Vdc 5-50 Vdc K43B — SPST-NC Shock, 11ms, 1/2 Sine (Peak) — Coil Resistance (±10%) 70 Ω 290 Ω 4700 Ω K43C — SPDT 50 g Ratings listed are for 25°C, sea level conditions Contact Form — Vibration — K43A — A Peak — 10 g (55 to 2000 Hz) K43B — B 7 Operating Ambient Temperature K43C — C Ordering Information Range — -55°C to +125°C Test Voltage, DC or 60 Hz (Peak) — Sample Part Number K43 A3 3 4 Mechanical Life — 2 million cycles 11 kV Weight, Nominal — Series: Rated Operating Voltage (Peak) — 28.35 g (1 oz.) DC or 60 Hz — 10 kV Contact Form: 2.5 MHz — 7 kV A = SPST-NO B = SPST-NC C = SPDT 16 MHz — 6 kV 32 MHz — 4 kV Coil Voltage: 2 = 12 Vdc, Bus Wire 3 = 26.5 Vdc, Bus Wire Continuous Carry Current, Max. — DC or 60 Hz — 25 A 5 = 115 Vdc, Bus Wire 7 = 12 Vdc, Turret Terminal* 2.5 MHz — 20 A 8 = 26.5 Vdc, Turret Terminal* 16 MHz — 13 A 9 = 115 Vdc, Turret Terminal* 32 MHz — 10 A High Voltage Connections: Coil Hi-Pot (Vrms, 60 Hz) — 500 A 3 = Solder Connection *See page 7-87 for turret Contact Capacitance — terminal dimensions and Between Open Contacts — 1.2 pF Mounting*: Open Contacts to Ground — 1.2 pF mounting methods. 2 = Flanged 4 = Standard 7–69 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change. KILOVAC High Voltage Relays K43 Series Make & Break Load Switching — 10 kV Relays (Continued) KILOVAC K43P Make & Break Load Switching Product Facts for K43P n High power rating; 24 Amps DC continuous current carry n Vacuum dielectric for power switching low current loads n Low power consumption n Fast operating: 5 millisecond operate time n Meets requirements of MIL-R-83725 KILOVAC K43R Make & Break Load Switching Product Facts for K43R n Single pole, double throw contacts with latching actuator n Vacuum dielectric for power switching low current loads n Carries 6 Amps at 32 MHz n Meets requirements of MIL-R-83725 Contact Resistance, Max. — Product Specifications for Coil Data 0.02 ohm K43P and K43R Volts, Nominal 26.5 Vdc Operate Time, Max. — Contact Arrangement — Latch & Reset, Max. 16 Vdc K43P — 5 ms K43P — SPST-Latching Dropout N/A K43R — 6 ms K43R — SPDT-Latching Coil Resistance (±10%) 80Ω Release Time, Max. — N/A Contact Form — Ratings listed are for 25°C, sea level K43P — P Shock, 11ms, 1/2 Sine (Peak) — conditions K43R — R 30 g Test Voltage, DC or 60 Hz (Peak) — Vibration — 11 kV Peak — 7 g (55 to 2000 Hz) Rated Operating Voltage (Peak) — Operating Ambient Temperature DC or 60 Hz — 10 kV Range — -55°C to +125°C 2.5 MHz — 7 kV Mechanical Life — 1 million cycles Ordering Information 16 MHz — 6 kV Weight, Nominal — 32 MHz — 4 kV 28.35 g (1 oz.) Sample Part Number K43 P3 3 4 Continuous Carry Current, Max. — DC or 60 Hz — 24 A Series: 2.5 MHz — 16 A Contact Form: 16 MHz — 9 A P = SPST-Latching R = SPDT-Latching 32 MHz — 6 A Coil Hi-Pot (Vrms, 60 Hz) — 500 A Coil Voltage: Contact Capacitance — 3 = 26.5 Vdc, Bus Wire Between Open Contacts — 1.2 pF High Voltage Connections: Open Contacts to Ground — 1.2 pF 3 = Solder Connection For factory-direct application assistance, *See page 7-87 for mounting Mounting: dial 800-253-4560, ext. 2055, or methods. 2 = Flanged 4 = Standard 805-220-2055. 7–70 Catalog 5-1773450-5 Dimensions are shown for Dimensions are in millimeters USA: +1 800 522 6752 For additional support numbers Revised 3-13 reference purposes only. unless otherwise specified. Asia Pacific: +86 0 400 820 6015 please visit www.te.com Specifications subject UK: +44 800 267 666 www.te.com to change.