TE CONNECTIVITY 44/0411-20-9
Specifications
Manufacturer
TE Connectivity
Manufacturers Part #
44/0411-20-9
Industry Aliases
44/0411-20-9, 270049-000
Sub-Category
Single Conductor Cables
Brand
Raychem Wire and Tubing
Factory Pack Quantity
1
Datasheet
DDEController?Action=srchrtrv&DocNm=44%2F0411&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf.pdf
122 KiB
Extracted Text
44/0411 SPECIFICATION CONTROL DRAWING WIRE, RADIATION-CROSSLINKED, POLYALKENE-INSULATED, 5-25-11 J LIGHTWEIGHT, OUTER SPACE, 600 VOLT This specification sheet forms a part of the latest issue of Raychem Specification 44. PRIMARY INSULATION - RADIATION-CROSSLINKED, CONDUCTOR - TIN-COATED COPPER EXTRUDED POLYALKENE JACKET - RADIATION-CROSSLINKED, MODIFIED PVDF Thickness: .003 ± .001 in., AWG 26 - 12 .005 ± .001 in., AWG 10 TABLE I. CONSTRUCTION DETAILS FINISHED WIRE MAXIMUM WIRE CONDUCTOR DIAMETER OF MAXIMUM PART NUMBER MAXIMUM SIZE STRANDING STRANDED RESISTANCE DIAMETER 1/ WEIGHT (AWG) (number x AWG) CONDUCTOR AT 20°C (in.) (lbs/1000 ft.) (in.) (ohms/1000 ft) 44/0411-26-* 26 7 x 34 .021 42.5 .033 ± .002 1.3 44/0411-24-* 24 19 x 36 .026 26.2 .039 ± .002 2.0 44/0411-22-* 22 19 x 34 .033 16.2 .046 ± .002 3.0 44/0411-20-* 20 19 x 32 .041 9.88 .054 ± .002 4.5 44/0411-18-* 18 19 x 30 .051 6.23 .064 ± .002 7.0 44/0411-16-* 16 19 x 29 .058 4.81 .071 ± .003 8.7 44/0411-14-* 14 19 x 27 .073 3.06 .086 ± .004 13.7 44/0411-12-* 12 37 x 28 .090 2.02 .108 ± .004 21.7 44/0411-10-* 10 37 x 26 .114 1.26 .155 ± .005 34.8 TABLE II. PERFORMANCE DETAILS BEND TESTING MANDREL DIAMETER WEIGHT PART NUMBER (inch) (± 3%) (lb) (± 3%) 1/ IMMERSION COLD RADIATION IMMERSION AND LIFE COLD LIFE CYCLE AND WRAP BEND RESISTANCE ACCELERATED AGING CYCLE BEND ACCELERATED AGING 44/0411-26-* .500 .500 .250 .750 .125 .125 .500 44/0411-24-* .500 .500 .250 1.00 .185 .125 .500 44/0411-22-* .750 .750 .375 1.00 .185 .185 1.00 44/0411-20-* .750 .750 .375 1.25 .185 .185 1.00 44/0411-18-* 1.00 1.00 .500 1.50 .250 .250 1.00 44/0411-16-* 1.00 1.00 .500 1.50 .250 .250 1.00 44/0411-14-* 1.50 1.50 .750 1.75 .500 .500 3.00 44/0411-12-* 2.00 2.00 1.00 2.50 .500 .500 3.00 44/0411-10-* 3.00 6.00 1.00 3.00 2.00 2.00 5.00 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER. AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Raychem Wire & Cable 501 Oakside Avenue DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL. Redwood City, CA 94063-3800 Page 1 of 2 Phone: 1-800-227-8816 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. Fax: 1-650-361-6297 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. © 2006-2011 Tyco Electronics Corporation,. All rights reserved. Revision SCD Number Page 2 of 2 J SPECIFICATION CONTROL DRAWING 44/0411 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 135°C Maximum continuous conductor temperature VOLTAGE RATING: 600 volts (rms) at sea level ACCELERATED AGING: 225 ± 2°C for 6 hours BLOCKING: 150 ± 2°C for 24 hours COLOR: White preferred FLAMMABILITY: 30 seconds (maximum); 3 in. (maximum); no flaming of facial tissue HUMIDITY RESISTANCE: Insulation Resistance, 5000 megohms for 1000 ft. (minimum) IDENTIFICATION AND COLOR STRIPING DURABILITY: 125 cycles (250 strokes) (minimum), 500 g weight IMMERSION: Diameter increase 5% (maximum); no cracking, no dielectric breakdown. INSULATION ELONGATION AND TENSILE STRENGTH: Primary Insulation, Elongation, 150% (minimum) Tensile Strength, AWG 26-12, 2500 lbf/in² (minimum) AWG 10, 2000 lbf/in² (minimum) INSULATION FLAWS: Primary Insulation, Spark Test, 1.5 kV (rms) Impulse Dielectric Test, 6.0 kV (peak) Finished Wire, Spark Test, 3.0 kV (rms) at 3 kHz Impulse Dielectric Test, 8.0 kV (peak) INSULATION RESISTANCE: 5000 megohms for 1000 ft. (minimum) LIFE CYCLE: 200 ± 2°C for 120 hours LOW TEMPERATURE-COLD BEND: -65 ± 2°C for 4 hours RADIATION RESISTANCE: 500 megarads SHRINKAGE: 225 ± 2°C, AWG 26-12 , 0.125 in. (maximum) in 12 inches AWG 10 , 0.250 in. (maximum) in 12 inches SMOKE TEST: 165 ± 2°C, no visible smoke. SURFACE RESISTANCE: 500 megohms-in. (minimum), both readings THERMAL SHOCK RESISTANCE: 135 ± 2°C, 0.060 in. (maximum) VACUUM STABILITY: Total Mass Loss (TML), 1.00% (maximum) Volatile Condensable Material (VCM), 0.10% (maximum) VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms), 60 Hz, 5 minutes; except for the following AWG 26-24 Life Cycle only: 600 volts (rms), 60 Hz, 5 minutes WICKING: 2.25 in. (maximum) PART NUMBER: The "*" in the part numbers on page 1 shall be replaced by color code designators. 1/ Example: AWG 20, white: 44/0411-20-9 AWG 20, white with black stripe: 44/0411-20-90 1/ See footer section on page 1
Frequently asked questions
How does Electronics Finder differ from its competitors?
Is there a warranty for the 44/0411-20-9?
Which carrier will Electronics Finder use to ship my parts?
Can I buy parts from Electronics Finder if I am outside the USA?
Which payment methods does Electronics Finder accept?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods