TE CONNECTIVITY 5021H5331-0

SPECIFICATION CONTROL DRAWING 5021H5331 Date: 04-30-04 50 OHM, AWG 21, 19 STRANDS OF AWG 33, TRIAXIAL CABLE CHEMINAX Revision: C THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS DIMENSIONS ARE NOMINAL VALUES IN INCHES, UNLESS OTHERWISE DESIGNATED. CHARACTERISTIC IMPEDANCE 50 ± 2 ohms, Method A CAPACITANCE 32.0 pF/ft. (nominal) 35.0 pF/ft. (maximum) CONDUCTOR .0355 AWG 21, VELOCITY OF PROPAGATION 66% (nominal) 19 Strands of AWG 33, Tin-Coated Copper DIELECTRIC .116 Rayolin F Color - Natural ADDITIONAL REQUIREMENTS ELECTRICAL 1ST SHIELD .137 AWG 36 CONDUCTOR RESISTANCE 11.7 ohms/1000 ft. (maximum) Tin-Coated Copper INSULATION RESISTANCE 10,000 megohms (minimum) for 1000 ft. JACKET FLAWS SPARK TEST 1.0 kV (rms) IMPULSE TEST 6.0 kV (peak) .187 1ST JACKET VOLTAGE WITHSTAND Thermorad® S CONDUCTOR TO SHIELD 1000 volts (rms) (minimum) Color - Black SHIELD TO SHIELD 500 volts (rms) (minimum) ENVIRONMENTAL .208 2ND SHIELD AWG 36 FLAMMABILITY Method C Tin-Coated Copper HEAT SHOCK 225°C LOW TEMPERATURE- COLD BEND -55°C/7.00 inch mandrel VOLTAGE WITHSTAND (POST ENVIRONMENTAL) 1000 volts (rms), 1 minute .258 (nominal) 2ND JACKET PHYSICAL .271 Thermorad® F (maximum) INSULATION (DIELECTRIC) ELONGATION 200% (minimum) 2 TENSILE STRENGTH 1800 lbf/in (minimum) st 1 JACKET ELONGATION 200% (minimum) 2 TENSILE STRENGTH 2000 lbf/in (minimum) nd 2 JACKET ELONGATION 100% (minimum) 2 TENSILE STRENGTH 2000 lbf/in (minimum) JACKET THICKNESS (EACH) .025 inch (nominal) Outer jacket color will be black (designated by a "-0" appended to SHIELD COVERAGE (EACH) 90% (minimum) the part number, e.g., 5021H5331-0) unless otherwise specified. Designate outer jacket color with a dash in accordance with MIL-STD-681. Other codes and suffixes may be added to the part number, as necessary, to capture any additional WEIGHT 46.0 lbs/1000 ft. (nominal) requirements imposed by the purchase order. Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 501 Oakside Avenue THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER R Redwood City, California 94063-3800 DOCUMENTS REFERENCED HEREIN. REFERENCED Wire & Cable Phone: 1-800-227-8816 DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE Fax: 1-650-361-6297 OF INVITATION FOR BID.