TE CONNECTIVITY 5021K1011-0

SPECIFICATION CONTROL DRAWING 5021K1011 Date: 09-16-03 50 OHM, AWG 21, 19 STRANDS OF AWG 33, CHEMINAX COAXIAL CABLE Revision: T THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200 CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE CHARACTERISTIC IMPEDANCE 50 ± 2 ohms, Method A DESIGNATED. CAPACITANCE 25.0 pF/ft. (minimum) 30.0 pF/ft. (maximum) CONDUCTOR .035 AWG 21, 19 Strands of ± .001 VELOCITY OF PROPAGATION 76% (nominal) AWG 33, Tin-Coated Copper ATTENUATION 15.5 dB/100 ft. (maximum) at 400 MHz DIELECTRIC .093 ® Rayfoam L ± .004 Color - Natural ADDITIONAL REQUIREMENTS ELECTRICAL CONDUCTOR RESISTANCE 11.7 ohms/1000ft. (nominal) SHIELD .114 INSULATION RESISTANCE 10,000 megohms (minimum) AWG 36 for 1000 ft. Tin-Coated Copper JACKET FLAWS SPARK TEST 1.0 kV, IMPULSE TEST 6.0 kV (peak) VOLTAGE WITHSTAND 1000 volts (minimum) (DIELECTRIC) VSWR FREQUENCY (Mhz) STRUCTURAL RETURN LOSS (db) 41 - 88 22 (minimum) 90 - 136 22 (minimum) 162 - 230 22 (minimum) When terminated with an approved connector ENVIRONMENTAL JACKET FLAMMABILITY Method B Radiation-Crosslinked, HEAT SHOCK 225°C .134 Modified ETFE LOW TEMPERATURE- -55°C/3.75 inch mandrel (nominal) COLD BEND .141 SKYDROL RESISTANCE 24 hours at 50 ± 1°C, change in O.D. (maximum) of 5% (maximum) VOLTAGE WITHSTAND (POST ENVIRONMENTAL) 1000 volts (rms), 1 minute PHYSICAL INSULATION (DIELECTRIC) ELONGATION 50% (minimum) 2 TENSILE STRENGTH 1000 lbf/in (minimum) JACKET ELONGATION 50% (minimum) 2 TENSILE STRENGTH 5000 lbf/in (minimum) JACKET THICKNESS .008 inch (minimum) SHIELD COVERAGE 90% (minimum) Outer jacket color will be black (designated by a "-0" appended to the part number, e.g., 5021K1011-0) unless otherwise specified. PRODUCT IDENTIFICATION: The cable shall be marked in a contrasting color at 6 inch (minimum), 12 inch (maximum) intervals between marks as follows: "5021K1011 06090" Designate outer jacket color with a dash number in accordance with MIL-STD-681. Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. WEIGHT 15.0 lbs/1000 ft. (maximum) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. THIS SPECIFICATION SHEET TAKES PRECEDENCE R OVER DOCUMENTS REFERENCED HEREIN. REFERNCE 501 Oakside Avenue Redwood City, California 94063-3800 DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT Wire & Cable 1-800-227-8816 Fax: 1-650-361-6297 ON DATE OF INVITATION FOR BID.