Attenuators, WDMs, and Switches Fiber Optic Products Catalog Switches Ruggedized Multimode Switches Refractive Plate Switch Part Number 6588871-1 Product Facts: ■ No optical path interruption @200 G’s for 8 ms ■ Successfully passed MIL_S_901D (Navy) Heavyweight Shock Test (Barge Test) ■ Fiber type 62.5/125um Tyco Electronics’ “Ruggedized” This switch is designed for multimode Refractive Plate Switch is a extreme environments that multimode optical switch that require absolute product is capable of withstanding a quality on optical installations 200 G shock with a duration and optical signal integrity. of >8ms without interruption Specifications of the signal path. Operating Temperature Range — -30° to +85° C Storage Temperature Range — -40° to +85° C Product Dimensions: Durability — >1,000,000 cycles Minimum Actuation Voltage — 4.75 V Maximum Actuation Voltage — 5.25 V 6 Actuation Current at Typical — 5.0 V Actuation Voltage — 100mA (maximum) NOTE Dimensions are Inches over millimeters Recommended Mounting Layout Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 187 Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-06 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341 Fiber Optic Products Catalog Switches (Continued) Multimode 1 x 2 SPDT Switch Dual 1 x 2 DPDT Switch 2 x 2 Bypass Switch Product Facts ■ Low profile ■ Utilizes pivoting mirror ■ Wide wavelength range ■ Low insertion loss Tyco Electronics Low Profile available in the following ■ 2x2 Bypass Switch Fiber Optic Switches are configurations: ■ Excellent repeatability Tyco Electronics’ Bypass miniature, board mountable ■ 1 x 2 SPDT Switch Switches provide bypass ■ Environmentally stable devices that permit the protection for fiber optic ■ Dual 1 x 2 DPDT Switch ■ Shock and vibration switching of an optical signal ring networks. They also resistant from one fiber to another. Tyco Electronics’ SPDT and provide bypass protection Switching is accomplished DPDT Switches permit the ■ Board or chassis mounting for fiber optic ring networks by a slight pivoting motion transfer of optic signals from per IEEE 802.5 and ANSI ■ Optical & electrical leads of a spherical mirror which an input fiber to either of FDDI standards. exit from one end for easy reflects the optical signal two output fibers. Switches cable routing A self-test path permits to the appropriate fiber. are applied to the positive testing the node's transmit- This patented imaging terminal. The switch reverts ter against its receiver when technology provides very to its original state when the switch is in the bypass low optical loss. power is removed. mode. This transmitter - Tyco Electronics’ Fiber Optic receiver path is attenuated Switches can be terminated to prevent saturation of the with any Tyco fiber optic receiver, while maintaining connector, and they are minimal light loss in the bypass path. Specifications Configuration 1 x 2 and Dual 1 x 2 2 x 2 Fully Reversing Bypass Switching speed 10 milliseconds maximum 10 milliseconds maximum Operating wavelength 750–1450 nanometers 750–1450 nanometers Insertion loss at 1300nm 0.8 dB max. per FOTP-34, Method A2 0.8 dB max. per FOTP-34, Method A2 5 dB on loopback path max Crosstalk ≤45 dB per FOTP-42 ≤45 dB per FOTP-42 Switch driver 5 V at 80mA max. 5 V at 80mA max. Drop In/Drop Out Drop In: 4.0 V minimum Drop In: 4.0 V minimum Voltage Drop Out: 0.5 V minimum Drop Out: 0.5 V minimum Fiber types Graded index 50/125, 62.5/125 Graded index 50/125, 62.5/125 (others available upon request) (others available upon request) Lead length 1 meter 1 meter Temperature range Operating –10°C to +65°C per FOTP-3, C2 Operating –10°C to +65°C per FOTP-3, C2 Storage –30°C to +70°C per FOTP-188, 4 Storage –30°C to +70°C per FOTP-188, 4 Connector styles ST Style ST Style (others available upon request) (others available upon request) Electrical interface Bent pins for PCB soldering, Bent pins for PCB soldering, straight pins for soldering, or straight pins for soldering, or AMP modular connector AMP modular connector Durability >1 million cycles >1 million cycles Weight (unconnectorized) <1 oz. <1 oz. Note: IL is for unconnectorized product 188 Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-06 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341 Attenuators, WDMs, and Switches Fiber Optic Products Catalog Switches (Continued) Multimode 1 x 2 SPDT Switch Dual 1 x 2 DPDT Switch 2 x 2 Bypass Switch (Continued) Application Information 1 x 2 SPDT Possible Application Schematic Dual 1 x 2 DPDT Possible Application Schematic Position 1 6 Position 2 2 X 2 Bypass Fully Reversing Possible Application Schematic 189 Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-06 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341 Fiber Optic Products Catalog Switches (Continued) Multimode 1 x 2 SPDT Switch Dual 1 x 2 DPDT Switch 2 x 2 Bypass Switch (Continued) Dimensions Switch Fiber Leads Used 1x 2 SPDT 1,2,3 Dual 1x 2 DPDT 1,2,3,4,5,6 2x 2 Bypass 1,2,3,4 Part Number Information 900um Loose Tube Cable 3mm Cable Jacket Electrical Fiber Switch Type: Fiber Size Fiber Size Fiber Size Fiber Size Interface Connector 50/125 62.5/125 50/125 62.5/125 None — — 5099403-1 5099403-2 Bent Pin ST Style 5099414-1 5099414-2 5099415-1 5099415-2 SC Style — — 8-5099403-1 8-5099403-2 1X2 None 5099420-1 5099420-2 — 5099421-2 Straight Pin ST Style — — 5099427-1 5099427-2 SC Style 8-5099420-1 8-5099420-2 — 8-5099421-2 None 5099973-1 5099973-2 5099974-1 5099974-2 Bent Pin ST Style — — — — SC Style 8-5099973-1 8-5099973-2 8-5099974-1 8-5099974-2 Dual 1X2 None 5099979-1 5099979-2 — — Straight Pin ST Style 5099981-1 5099981-2 5099982-1 5099982-2 SC Style 8-5099979-1 8-5099979-2 — — None — — 5099405-1 5099405-2 Bent Pin ST Style 5099416-1 5099416-2 5099417-1 5099417-2 SC Style — — 8-5099405-1 8-5099405-2 2X2 Bypass None — — 5099423-1 5099423-2 Straight Pin ST Style — — 5099429-1 5099429-2 SC Style — — 8-5099423-1 8-5099423-2 Fiber Type: 50/125 62.5/125 -1 -2 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 190 Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-06 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341 Attenuators, WDMs, and Switches Fiber Optic Products Catalog Switches (Continued) Multimode Bypass Switches Product Facts ■ Increases reliability of mission-critical network applications ■ Low insertion loss — 1.8 dB typical, including connectors ■ Meets ANSI FDDI power output specification of -20 dBm ■ Choice of 62.5/125 µm, 50/125 µm ■ Choice of FSD MIC, ST-style, or duplex SC connectors and ports ■ Rack or panel-mount versions ■ Compact size with all front- mounted connections to conserve space ■ High-speed optical switching Tyco Electronics’ Bypass specific fibers in either the attached station and the ■ Simple to install Switch is a second- operate or bypass state. ring. Pigtailed optical-fiber generation device that Signal attenuation is very cables connect the switch allows a dual-attach station low on the network path. In module to the node, while to be bypassed without loss the bypass state, the path the primary and secondary of ring integrity. The switch from transmitter to receiver ring cables connect to 6 module contains two fully is attenuated to prevent the switch’s A and B ports. reversing optical bypass receiver saturation. Holding The electrical connection switches that direct the the switches in the operating is supplied by one of optical signals to the (non-bypass) state requires three standard electrical appropriate fiber according a 5-VDC, 160-mA power. interfaces. A status LED to signals on the device’s Both switches return to the lights when the switch is electrical interface. bypass state if the power is in the operate state. The removed. Switching occurs A spherical mirror, which is bypass switch can be in less than 10 ms. pivoted at high speeds either booth panel or rack between two stable The modules are easy to mounted. positions, reflects light into install between a dual- Singlemode Bypass Modules Tyco Electronics offers Singlemode Bypass Modules designed to meet your optical path protection needs. For more information, please consult your local Tyco Electronics Sales Representative or call Tyco Electronics Product Information Center at 1-800-522-6752. 191 Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-06 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341 Fiber Optic Products Catalog Switches (Continued) Multimode Bypass Switches (Continued) Switch Operation: Bypass and Operate States Specifications Insertion Loss Operate Mode Item Value Short Launch Powered Switching Speed 10 ms max. PI to PRx 1.8 dB Max. Operating Wavelength 750 - 1450 nm SI to SRx 1.8 dB Max. Crosstalk ≤45 dB (FOTP-42) PTx to PO 1.8 db Max. Switch Driver 5 V at 160 mA STx to SO 1.8 dB Max. Fiber Type 62.5/125-µm or 50/125-µm graded index Operate Mode Short Launch Operating Temperature -10ºC to +65ºC (FOTP-3, Condition C2) Not Powered Storage Temperature -30ºC to +70ºC (FOTP-3, Condition C2) PI to PRx 1.8 dB Max. Durability >1 million cycles SI to SRx 1.8 dB Max. Weight 12 oz [340 g] PTx to PO 5.0 dB Max. STx to SO 5.0 dB Max. Note: FOTP-34, Method A2. IL values given for ST/SC options. 192 Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-06 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341 Attenuators, WDMs, and Switches Fiber Optic Products Catalog Switches (Continued) Multimode Bypass Switches (Continued) Switch Module Base Part Numbers Part Numbers Optical Fiber Pigtails Input Mounting Port Interface 62.5/125-µm Fiber 50/125-µm Fiber FSD MIC ST-style SC FSD MIC SC Panel 5209161 5209162 5209163 5209167 — FSD MIC Rack 5209164 5209165 5209166 5209170 — 6 Panel — 5209174 5209175 — — ST Rack — 5209177 — — — Panel — — 5209187 — 5209193 Duplex SC Rack 5209188 — 5209190 — 5209196 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. Switch Module Dash Numbers: Electrical Interface Note: The electrical cable consists Dash Number Station Connector of an 8-position modular plug at one -3 6-pos. Shielded Modular Plug end for connecting to the switch and -4 6-pos. Shielded Miniature Circular DIN Plug one of the connectors listed at the other end. -6 4-pos. Modular Plug Ordering Information Select the required switch module. To the base part number for the module, add the dash number for the electrical interface you require for the station connector. Example: 209163- 3 is a switch with FSD MIC receptacles on ring ports, duplex SC connectors on the fiber pigtails, and a 6-position modular plug on the electrical cable. For other connector interfaces, contact your local Tyco Electronics Sales Representative 193 Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-06 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341 Fiber Optic Products Catalog Switches (Continued) Multimode Bypass Switches (Continued) Station Connector and Pinouts To Order the Electrical Interface Powercord Separately: Part Number Station Connector 5209503-1 6-pos. Modular Plug 5209504-1 6-pos. Shielded Miniature DIN Plug 5209506-1 4-pos. Modular Plug Rack-Mount Panel Part Number: 209197-1 Mounts in a 19-inch rack and accepts up to three switch modules. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 194 Catalog 1307895 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-06 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 52-55-1106-0800 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 57-1-254-4444 UK: 44-208-420-8341