TE CONNECTIVITY 5225974-2

RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Product Facts ■ Bayonet lock coupling for quick connect/disconnect ■ Various connectors available in 50 and 75 ohm versions ■ Fully intermateable with comparable BNC UG/U connectors ■ Full range of Hex Crimp and O Crimp Products for common coaxial cables. ■ Low VSWR ■ Single crimp connectors offer one crimping operation for fast application ■ Twist-on connectors require no special tooling for application to the cable ■ Field serviceable (Category A) connectors qualified to MIL-C-39012 ■ Field replaceable (Category C) plugs with captivated The Tyco Electronics BNC nectors feature numerous Tyco Electronics can also center contact RF connector family with styles including cable plugs supply low cost alternatives ■ Field replaceable plugs can bayonet locking coupling and jacks, adapters and with an extensive commer- be terminated with industry provides highly reliable, printed circuit board con- cial type product line. A standard tooling quick connect/disconnect nectors. In addition to a lower cost consumer series ■ Tarnish resistant Nickel coaxial connections. variety of crimp type termi- product offers the capability finish available Exclusive single and nations, connectors are fur- to supply center contacts in O crimp terminations allow nished in field replaceable strip form and allow for auto- ■ Choice of different dielectrics positive insulation grip and twist-on styles. These mated center contact crimp ■ Listed under the Component and require no soldering, connectors accept a wide technology. All connectors Program of Underwriters providing terminations at range of coaxial cables and are designed around the Laboratories Inc., a very low overall applied are intermateable with mil-specifications, but utilize R File No. E81956 cost. industry standard connec- low-cost materials, offering tors designed to MIL-C- comparable mechanical ■ PC Board soldered Available in both 50 and 75 39012 specifications. and electrical performance. connectors are recognized ohm versions, these con- under the Component Program of Underwriters Laboratories Inc., R File No. E81956 Related Product Data ■ Certified by Canadian Product Specifications — 108-12002 — BNC Commercial Performance Specifications — Standards R T Adapter Page 45 108-1275 — BNC Ohm Terminators Association 108-12095 — BNC Commercial 75 Material Specifications — Page 46 108-12020 — BNC O Crimp File No. LR 7189 Ohm Connectors Connectors Tooling — Pages 266-268 108-12096 — BNC Commercial Feed- 108-12044 — BNC Commercial Hex Military Category — All MIL type Thru and Bulkhead Crimp O crimp connectors are Category B Type Adapters (Tyco Electronics Crimp Tooling), unless 108-12047 — BNC Commercial and 108-12079 — BNC Commercial 50 otherwise noted. Hex Crimp Connectors Ohm Solder Jacks Between Series Adapters Packaging — All MIL Type connectors 108-12074 — BNC Solder Jacks 108-12103 — BNC Commercial PCB are packaged individually, all O crimp For BNC Between Series Adapters, see 108-12075 — BNC Connectors Press Fit Jacks connectors are bulk packaged and all Hex pages 251-260. (Category A) crimp connectors are individually pack- Application Specifications — 108-12078 — BNC Commercial PCB aged unless otherwise noted. 114-12001 — BNC Commercial PCB Panel-Mount Jacks Jack Press Fit 44 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Performance Specifications Commercial Commercial Single Category B Straight Right-Angle Commercial PC Commercial O Crimp O Crimp Characteristics Crimp O Crimp Solder Solder Board Solder & Hex Crimp & Hex Crimp (MIL Type) (MIL Type) Clamp Clamp 50 & 75 Ohms 50 Ohm Jacks 50 Ohms 75 Ohms Electrical Impedance, Nom. 50 50 50 50 50 75 50 & 75 50 & 75 (Ohms) Working Voltage 500 500 500 500 500 500 500 500 (Volts RMS) Contact Resistance Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 1.5 Inner: 2.0 Inner: 2.0 Inner: 6/1.5 Inner: 2.75 (Milliohms) Outer: 0.3 Outer: 0.2 Outer: .20 Outer: .20 Outer: 1.0 Outer: 2.0 Outer: 3/0.2 Outer: 1.0 Initial Insulation Resistance 5000 5000 5000 5000 5000 5000 5000 5000 (Megohms) Dielectric Withstanding 1500 1500 1500 1500 1500 1500 1500 1500 Voltage (VAC) Corona Level at 70,000 ft. 375 375 375 375 375 375 — 375 (Volts, RMS) RF Leakage, Max. -55 at -55 at -55 at -55 at -55 at — —— (dB) 2-3 GHz 2-3 GHz 2-3 GHz 2-3 GHz 1-2 GHz RF Insertion Loss, 0.2 at 0.2 at 0.3 at 0.2 at 0.15 at — —— Max. (dB) 3 GHz 3 GHz 3 GHz 3 GHz 2 GHz Frequency Range 0-4 and 0-2.5 0-4 0-4 0-4 0-4 0-2 0-4 (GHz) 0-2 VSWR in Frequency 1.35 1.30 1.30 1.35 1.30 1.30 — — Range Max. Mechanical Force to Engage (lbs. [N])/couple, 13.3/11.12 13.3/11.12 13.3/.028 13.3/.028 26.7/26.69 26.7/26.69 —— (in-lbs. [N-M]) max. [3/2.5] [3/2.5] [3/2.5] [3/2.5] [6/6.0] [6/6.0] Coupling Nut Retention, 444.8 444.8 444.8 444.8 266.9 266.9 —— Min. N [lbs.] [100] [100] [100] [100] [60] [60] Cable Retention, 266.9 [60] 266.9 [60] 177.9 [40] 177.9 [40] 266.9 [60] 266.9 [60] 266.9 [60] — N [lbs.] (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (RG58C/U) (PCB Ret) Durability (Cycles) 500 500 500 500 500 500 500 500 3 4 Jam Nut Mounting Torque, 25 25 25 25 25 25 /12 25 — Max. [N•m] (in. lbs.) [2.8] [2.8] [2.8] [2.8] [2.8] [2.8/1.4] [2.8] Environmental 1 Temperature Range, -65 to +165 -65 to +85 -65 to +165 -65 to +165 -55 to +85 -55 to +85 -55 to +85 -65 to +165 2 Operating (C°) -55 to +85 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 Vibration Method 204 Method 204 Method 204 Method 204 Method 2005 Method 204 Method 204 Method 201A Cond. B Cond. B Cond. B Cond. B Cond. III Cond. B Cond. B MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 Physical Shock Method 213 Method 213 Method 213 Method 213 Method 2004 Method 213 Method 213 Method 213 Cond. G, 50 G’s Cond. G, 50 G’s Cond. G Cond. G Cond. G, 100 G’s Cond. I, 100 G’s Cond. I or A, 50 G’s Cond. I, 100 G’s MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 Thermal Shock Method 1003 Method 107 Method 107 Method 107 Method 107 Method 107 Method 107 Method 107 Cond. A MIL-STD-1344 Moisture MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 Method 1002 Resistance Method 106 Method 106 Method 106 Method 106 Method 106 Method 106 Method 106 Type II MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-202 MIL-STD-1344 MIL-STD-202 MIL-STD-202 MIL-STD-202 Salt Spray Method 101 Method 101 Method 101 Method 101 Method 1001 Method 101 Method 101 Method 101 Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Cond. B Product 108-12044 108-12002 108-12020 — — 108-12095 108-12078 108-12079 Specification 108-12047 1 Assembled to cable with polytetrafluorethylene dielectric. 2 Assembled to cable with polyethylene dielectric. 3 For Metal Threads 4 For Polyester Threads 45 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors (50 ohm/75 ohm) Performance Specifications (Continued) Category Commercial Single Straight Right-Angle Commercial Commercial Commercial Connector B & C O Crimp Crimp Solder Solder PCB PCB Solder Adapters Component O Crimp Hex Crimp & (MIL Type) Clamp Clamp Solder Press Fit Ohm Jacks (MIL Type) Terminators Connector Material Brass Brass Brass QQ-B-626 Brass Collar Brass Brass —— — QQ-B-626 QQ-B-626 Zinc QQ-Z-363 QQ-B-626 Brass Brass Outer Contact QQ-B-626 Phos. Bronze Brass QQ-B-626 Brass Brass —— — (Plug) Beryl. Copper QQ-B-750 MIL-C-21768 Beryl. Copper QQ-C-530 QQ-C-530 Zinc Shell Brass Brass Zinc Zinc Zinc QQ-Z-363 Brass Brass — (Jack) QQ-B-626 QQ-B-626 QQ-Z-363 QQ-Z-363 QQ-Z-363 Brass QQ-B-626 QQ-B-626 PTFE Polyethylene PTFE PTFE MIL-P-19468 PTFE Polypropylene Polymethylpentene PTFE MIL-P-19468 MIL-P-19468 Dielectric PTFE PTFE 1 Polypropylene MIL-P-19468 Polymethylpentene Gen. Purpose MIL-P-19468 Polyester PBT Polypropylene, Gen. Purpose Gen. Purpose MIL-P-24519 Gen. Purpose Brass Center Contact Brass Brass Brass QQ-B-626 Brass Brass —— — (Plug) QQ-B-626 QQ-B-626 QQ-B-626 Beryl. Copper QQ-C-530 Phos. Bronze Phos. Bronze Beryl. Copper Beryl. Copper Center Contact Beryl. Copper Phos. Bronze Beryl. Copper QQ-B-570 QQ-B-570 ASTM-B-643 ASTM-B-643 Beryl. Copper Beryl. Copper (Jack) QQ-C-530 QQ-B-750 QQ-C-530 Beryl. Copper Beryl. Copper QQ-C-530 QQ-C-530 QQ-C-530 QQ-C-530 Silicon Rubber Silicon Rubber Silicon Rubber Silicon Rubber Gasket Silicon Rubber Silicon Rubber —— — QQ-R-765 QQ-R-765 QQ-R-765 QQ-R-765 Copper Copper Copper Ferrule —— —— — — QQ-C-576 QQ-C-576 QQ-C-576 2 Connector Primary Finishes Silver Silver Silver QQ-S-365 QQ-S-365 Silver/ Silver/ Bright Nickel QQ-S-365 Collar —— — Bright Nickel Bright Nickel Bright Nickel Bright Nickel QQ-N-290 Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 Silver Silver Bright or Outer Contacts QQ-S-365 QQ-S-365 Silver/ Silver/ Bright Nickel Bright Nickel Bright Nickel QQ-S-365 Matte Nickel (Plug & Jack) Gold Bright Nickel Bright Nickel Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 Bright Nickel QQ-N-290 QQ-N-290 QQ-N-290 Tin Lead Tin Lead Tin Lead Silver Center Contacts MIL-G-45204 Gold ASTM-B-545 ASTM-B-545 Gold ASTM-B-545 QQ-S-365 Gold Gold (Plug & Jack) Silver MIL-G-45204 Silver, QQ-S-365 Silver, QQ-S-365 MIL-B-45204 Silver, QQ-S-365 Gold Gold, MIL-G-45204 Gold, MIL-G-45204 Gold, MIL-G-45204 MIL-G-45204 Silver QQ-S-365 Tin Lead 3 Ferrule QQ-S-365 —— —— — — Tin Lead ASTM-B-545 ASTM-B-545 1 Several pc board connectors have an outer polyester PBT insulator per MIL-P-24519. 2 If more than one finish is listed, refer to individual catalog page(s) or customer drawings for exact specification. 3 Ferrules with tin-lead finish are used with nickel plated outer contacts. 46 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm Single Crimp Hex and O Crimp Plugs, Crimp L 14.53 L Max. [.572] 14.53 Max. Dia. Max. [.572] Dia. Max. Interchangeable Dies Interchangeable CERTI-CRIMP for PRO-CRIMPER Dies for Hand RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dielectric Style Tool 69710-1 Part No. Cable Type Plating L with or & 626 Pneu. Integral Die PRO-CRIMPER Head 318161-1 Adapter 679304-1 178, 178A, 33.33 178B, Single Crimp Silver PTFE MIL Type 69245-4 — 69471 5330876-0 1.312 - 196, 196A 33.53 Hex Crimp Nickel Polyethylene Commercial — 58436-3 — 2-5221128-1 1.320 27.69 O Crimp Nickel Polyethylene Commercial 220009-5 318450-2 220217-3 1-5227079-6 174, 1.090 188, 188A, 30.18 316 O Crimp Nickel PTFE MIL Type — 1424050-1 220026-1 5225395-7 1.188 33.33 Single Crimp Silver PTFE MIL Type 69245-2 — 69422- 2-5330061-1 1.312 33.53 Hex Crimp Nickel Polyethylene Commercial — 58436-3 — 2-5221128-3 1.320 179, 179A, 27.69 O Crimp Nickel Polyethylene Commercial — 1424050-1 220217-3 2-5227079-2 179B, 161, 1.090 187, 187A, 30.18 BELDEN O Crimp Nickel PTFE MIL Type - —— 220026-1 5225395-8 1.188 9221 33.33 — Single Crimp Silver PTFE MIL Type 91910-1 69408- 2-5329446-1 1.312 RD 316, 188, 27.69 O Crimp Nickel Polyethylene Commercial 69477-4 58539-1 — 8-5227079-2 Double Braid 1.090 33.53 2 Hex Crimp Nickel Polyethylene Commercial — 58436-1 — 2-5221128-7 1.320 BELDEN 8219 27.69 1 3 O Crimp Nickel Polyethylene Commercial 220187-1 58435-1 220217-1 6-5227079-7 1.090 BELDEN 9907, 27.69 4 89907 COMM/ O Crimp Nickel Polyethylene Commercial 220187-1 318452-2 220217-1 6-5227079-8 1.090 SCOPE 2104 27.69 O Crimp Nickel Polyethylene Commercial 69477-4 58539-1 58376-1 1-5227079-9 1.090 BELDEN 8218 30.18 O Crimp Nickel PTFE MIL Type — 91904-1 69669-2 1-5225395-0 1.188 1 Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2 Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 3 For use with BELDEN 9907 cable, COMM/SCOPE 3104 cable, and BELDEN 8219 cable only. 4 For use with BELDEN 89907 cable, and COMM/SCOPE 2104 cable only. BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 47 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Single Crimp Hex and O Crimp Plugs, Crimp (Continued) L 14.53 L Max. [.572] 14.53 Max. Dia. Max. [.572] Dia. Max. Interchangeable Dies Interchangeable CERTI-CRIMP for PRO-CRIMPER Dies for Hand RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dielectric Style Tool 69710-1 Part No. Cable Type Plating L with or & 626 Pneu. Integral Die PRO-CRIMPER Head 318161-1 Adapter 679304-1 33.53 2 3 Hex Crimp Nickel Polyethylene Commercial — 58436-1 — 5221128-1 1.320 27.69 1 O Crimp Nickel Polyethylene Commercial 220187-1 58435-1 220217-1 5227079-5 1.090 58, 58A, 58B, 58C 33.74 2 O Crimp Nickel PTFE MIL Type 69478-1 220189-3 69727- 5225395-1 1.328 33.33 2 Single Crimp Silver PTFE MIL Type — 91904-4 69223-1 2-5329444-1 1.312 33.53 2 BELDEN Hex Crimp Nickel Polyethylene Commercial — 58436-1 — 1-5221128-0 1.320 88240, BERK-TEK 33.33 1 O Crimp Nickel Polyethylene Commercial 220187-1 58435-1 220217-1 4-5227079-3 BTDC-58, 1.312 COMM/ 33.33 2 SCOPE 2135 O Crimp Nickel PTFE MIL Type 69478-1 220189-3 69727- 4-5225395-2 1.312 27.69 1 O Crimp Nickel Polyethylene Commercial 220187-1 58435-1 220217-1 5227079-6 1.280 223, 43.64 2 55, 55A, O Crimp Nickel PTFE MIL Type 69478-1 220189-3 69727- 5225395-3 1.718 55B 33.33 Single Crimp Silver PTFE MIL Type — 91904-3 69424- 2-5329444-2 1.312 27.69 1 O Crimp Nickel Polyethylene Commercial 220187-1 58435-1 220217-1 6-5227079-1 1.090 142, 142A, 30.18 2 O Crimp Nickel PTFE MIL Type 69478-1 220189-3 69727- 5225395-6 142B, 400 1.188 33.33 2 Single Crimp Silver PTFE MIL Type 69331-1 — 69429-1 2-5330358-2 1.312 Consult Tyco Electronics for recommended crimp tooling. 1 Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2 Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 3 Bulk packaged. BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. COMM/SCOPE is a trademark of Commscope, Inc. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 48 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Single Crimp Hex and O Crimp Plugs, Crimp (Continued) L 14.53 L Max. [.572] 14.53 Max. Dia. Max. [.572] Dia. Max. Interchangeable Dies Interchangeable CERTI-CRIMP for PRO-CRIMPER Dies for Hand RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Dielectric Style Tool 69710-1 Part No. Cable Type Plating L with or & 626 Pneu. Integral Die PRO-CRIMPER Head 318161-1 Adapter 679304-1 33.53 2 Hex Crimp Nickel Polyethylene Commercial — 58436-1 — 1-5221128-1 1.320 27.69 1 O Crimp Nickel Polyethylene Commercial 220187-2 58435-1 220217-2 5227079-7 124, 140, 210, 1.090 62, 62A, 62B, 27.69 1 59, 59A, 59B, O Crimp Nickel Polyethylene Commercial 220187-2 58435-1 220217-2 1-5227079-1 1.090 BELDEN 9291, 30.18 9209, 9269 O Crimp Nickel PTFE MIL Type — 58537-1 — 5225395-2 1.188 33.33 Single Crimp Silver PTFE MIL Type 69141-1 — — 2-5329445-1 1.312 302, BELDEN 33.53 2 88241, 89269, Hex Crimp Nickel Polyethylene Commercial — 58436-1 — 1-5221128-1 1.320 Hi-Temp 62A, Times PL62, 34.14 BERK-TEK, BTDC-59, O Crimp Nickel PTFE MIL Type 69477-1 58537-1 69669-1 4-5225395-1 1.344 BTDC-62 Hi-Temp 59, 33.33 Times PL59, O Crimp Nickel Polyethylene Commercial — 58537-1 — 5-5227079-3 1.312 PLF59 (20 AWG C.C.) BELDEN 33.53 2 9104, 9240, Hex Crimp Nickel Polyethylene Commercial — 58436-1 — 1-5221128-7 1.320 9112, 9167, 9259, 9266, 30.94 2 Times O Crimp Nickel PTFE MIL Type — 58537-1 69669-1 2-5225395-0 1.218 FM-59 BELDEN 8281, 9141, 9231, 41.50 Single Crimp Silver Polypropylene MIL Type 69652- — 220000-1 5330878 Western Electric 1.634 724, 728, 3049 8, 8A, 27.31 O Crimp Silver PTFE MIL Type 220015-1 — — 5225886-1 213 1.075 47.63 11, 11A O Crimp Silver PTFE MIL Type 220015-1 — — 5225886-4 1.875 BELDEN 9914, 47.63 O Crimp Silver PTFE MIL Type 220015-1 — — 5225886-7 Times FM-8 1.875 Alpha 9847, 47.63 O Crimp Silver PTFE MIL Type 220015-1 — — 225886-5� BELDEN 8213, 9292 1.875 9, 9A, 9B, 52.38 O Crimp Silver PTFE MIL Type 220015-1 — — 5225886-1 214 2.062 1 Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 2 Order Tyco Electronics PRO-CRIMPER Coaxial Hex Crimp Hand Tool assembly 58433-2, which includes dies 58436-1. 2 Tyco Electronics PRO-CRIMPER II Hand Tool Frame without dies Part No. 354940-1 BELDEN is a trademark of Belden Wire and Cable Company. BERK-TEK is a trademark of Nexans, Inc. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 49 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, Twist-On Related Product Data Twist-On plugs must be used with cable that has a solid conductor. These plugs 38.10 are not recommended for applications 14.53 [1.500] where the cable frequently moves or [.572] Dia. Max. flexes. RG/U Contact Body Mating Twist-On Jack — Page 52 Dielectric Style Part No. Cable Plating Plating 59, 59A, Polymethyl- Gold Nickel Commercial 5414265-3 59B pentene Single Crimp Hex and O Crimp Right-Angle Plugs, Crimp 26.57 26.57 [1.046] [1.046] L Max. L Max. 14.53 [.572] 14.53 Dia. Max. [.572] Dia. Max. Interchangeable Dies Interchangeable CERTI-CRIMP for PRO-CRIMPER Center Dies for Hand RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Contact Dielectric Style Tool 69710-1 Part No. Cable Type Plating L with or Plating & 626 Pneu. Integral Die PRO-CRIMPER Head 318161-1 Adapter 679304-1 Polymethyl- 39.45 Hex Crimp Gold Nickel Commercial — 58436-3 — 5413959-3 pentene 1.553 174, 188, 188A, 316 44.45 Single Crimp Gold Silver PTFE MIL Type — 91910-1 69422- 5331178-0 1.750 179, 179A, 39.45 179B, 161, Polymethyl- Hex Crimp Gold Nickel Commercial — 58436-3 — 5413959-4 1.553 187, 187A, pentene BELDEN 9221 180, 180A, 180B, Polymethyl- 39.45 Hex Crimp Gold Nickel Commercial — 58436-3 — 5413959-5 195, 195A pentene 1.553 BELDEN 9907, 89907, 8219, Polymethyl- 39.45 Hex Crimp Gold Nickel Commercial — 58436-1 — 5413959-6 COMM/SCOPE pentene 1.553 2104, 3104 Polymethyl- 39.45 Hex Crimp Gold Nickel Commercial — 58436-1 — 5413959-1 pentene 1.553 58, 58A, 37.29 O Crimp Gold Nickel PTFE MIL Type 69478-1 220189-3 69727-1 5225974-1 58B, 58C 1.468 44.45 Single Crimp Gold Silver PTFE MIL Type — 91904-1 69223-1 5331175-0 1.750 37.29 O Crimp Gold Nickel PTFE MIL Type 69478-1 220189-3 69727-1 5225974-2 1.468 55, 55A, 55B, 223 44.45 Single Crimp Gold Silver PTFE MIL Type — 91904-3 69429-1 5331182-0 1.750 142, 142A, 44.45 Single Crimp Gold Silver PTFE MIL Type 69331-1 — 69429-1 5331182-0 142B, 400 1.750 124, 140, 210, 62, 62A, 62B, 37.29 PTFE 59, 59A, 59B, O Crimp Gold Nickel MIL Type — 58537-1 69669-1 5225974-5 1.468 BELDEN 9291, 9209, 9269 BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 50 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Single Crimp Hex and O Crimp Jacks, Crimp 11.1 11.08 L [.437] L [.436] Max. Dia. Max. Max. Dia. Max. Interchangeable Dies Interchangeable CERTI-CRIMP for PRO-CRIMPER Center Dies for Hand RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Contact Dielectric Style Tool 69710-1 Part No. Cable Type Plating L with or Plating & 626 Pneu. Integral Die PRO-CRIMPER Head 318161-1 Adapter 679304-1 Polymethyl- 33.02 Hex Crimp Gold Nickel Commercial — 58436-3 — 5413779-3 pentene 1.300 Polypro- 30.48 O Crimp Gold Nickel Commercial — 1424050-1 220217-3 5228979-7 pylene 1.200 174, 188, 188A, 316 30.48 O Crimp Gold Nickel PTFE MIL Type - — 1424050-1 220026-1 5225396-7 1.200 33.33 Single Crimp Gold Silver PTFE MIL Type —— 69422- 2-5330062-1 1.312 179, 179A, 179B, 161, Polymethyl- -33.02 Hex Crimp Gold Nickel Commercial — 58436-3 — 2-5413779-4 187, 187A, pentene 1.300 BELDEN 9221 Polypro- 30.48 1 O Crimp Gold Nickel Commercial 220187-1 58435-1 220217-1 5228979-5 pylene 1.200 58, 58A, 58B, 58C 30.48 2 O Crimp Gold Nickel PTFE MIL Type — 91901-1 69727- 5225396-11 1.200 223, 55, 33.33 Single Crimp Gold Silver PTFE MIL Type 69140-2 91904-3 69424- 2-5329452-2 55A, 55B 1.312 124, 140, 210, Polypro- 30.48 1 O Crimp Gold Nickel Commercial 220187-2 58435-1 220217-2 5228979-6 62, 62A, 62B, pylene 1.200 59, 59A, 59B, 30.48 BELDEN 9291, O Crimp Gold Nickel PTFE MIL Type — 58537-1 269669-1 5225396-2 1.200 9209, 9269 1 Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 51 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks, Twist-On Related Product Data Twist-on jacks must be used with cable that has a solid conductor. These jacks are not recommended for applications where the cable frequently moves or flexes. 40.14 Max. [1.580] Mating Twist-On Plug — Page 50 RG/U Center Body Dielectric Style Part No. Cable Contact Plating 59, 59A, 59B Gold Nickel Acetal Commercial 222428-1 Panel Jacks, Crimp 11.2 Dia. [.441] ±0.1 12.7 ±.004 [.500 ] 17.84 ±0.1 Max. 12.7 28.96 [.702] ±.004 [.500 ] [1.140] 2.77 Max. Dia. [.109] Recommended Panel Cutout Interchangeable Dies Interchangeable CERTI-CRIMP for PRO-CRIMPER Center Dies for Hand RG/U Termination Body Hand Tool Hand Tool 354940-1 Contact Dielectric Style Tool 69710-1 Part No. Cable Type Plating with or Plating & 626 Pneu. Integral Die PRO-CRIMPER Head 318161-1 Adapter 679304-1 174, 188, 188A, 316 O Crimp Gold Nickel PTFE MIL Type — 1424050-1 220026-1 5225397-7 58, 58A, 58B, 58C O Crimp Gold Nickel PTFE MIL Type -69478-1 91901-1 69727- 5225397-1 124, 140, 210, 62, 62A, 62B, 59, 59A, 59B, BELDEN 9291, O Crimp Gold Nickel PTFE MIL Type -69477-1 258537-1 269669-1 5225397-2 9209, 9269, 89269 BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 52 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Single Crimp Hex and O Crimp Bulkhead Jacks, Crimp Note: Panel Insulating Bushings — Page 54 H L H L Max. Max. +0.13 12.83 -0.00 12.82 Dia. +.005 [.505 ] -.000 [.505] Dia. Min. Recommended Panel Cutouts 11.04 [.435] Maximum Panel Min. Thickness 3.18 [.125] +0.08 5.54 -0.00 +.003 [.218 ] -.000 H = 11/16" across flats, 20.32 [.800] Max. across points Interchangeable Dies Interchangeable CERTI-CRIMP for PRO-CRIMPER Center Dies for Hand RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Contact Dielectric Style Tool 69710-1 Part No. Cable Type Plating L with or Plating & 626 Pneu. Integral Die PRO-CRIMPER Head 318161-1 Adapter 679304-1 Polymethyl- 36.83 Hex Crimp Gold Nickel Commercial — 58436-3 — 5413771-3 pentene 1.450 Polypro- 34.93 O Crimp Gold Nickel Commercial —— 220217-3 5228980-7 pylene 1.375 174, 188, 188A, 316 35.71 O Crimp Gold Nickel PTFE MIL Type —— 220026-1 5225398-7 1.406 32.13 Single Crimp Gold Silver PTFE MIL Type —— 69422- 2-5330063-1 1.265 35.71 179, 179A, O Crimp Gold Nickel PTFE MIL Type — 1424050-1 220026-1 5225398-8 1.406 179B, 161, 187, 187A, 32.13 Single Crimp Gold Silver PTFE MIL Type — 91910-1 69408- 2-5329458-1 BELDEN 9221 1.265 35.71 Times RD316 O Crimp Gold Nickel PTFE MIL Type — 91904-1 69669-2 1-5225398-5 1.406 BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 53 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Single Crimp Hex and O Crimp Bulkhead Jacks, Crimp (Continued) Note: Panel Insulating Bushings — at the bottom of this page L H L Max. H Max. +0.13 12.83 -0.00 12.82 Dia. +.005 [.505 ] -.000 [.505] Dia. Min. Recommended Panel Cutouts 11.04 [.435] Maximum Panel Min. Thickness 3.18 [.125] +0.08 5.54 -0.00 +.003 [.218 ] -.000 H = 11/16" across flats, 20.32 [.800] Max. across points Interchangeable Dies Interchangeable CERTI-CRIMP for PRO-CRIMPER Center Dies for Hand RG/U Termination Body Dim. Hand Tool Hand Tool 354940-1 Contact Dielectric Style Tool 69710-1 Part No. Cable Type Plating L with or Plating & 626 Pneu. Integral Die PRO-CRIMPER Head 318161-1 Adapter 679304-1 58, 58A, 58B, 58C, BELDEN 88240, Polymethyl- 36.83 Hex Crimp Gold Nickel Commercial — 58436-1 — 5413771-1 BERK-TEK pentene1.450 BTDC-58, COMM/SCOPE 2135 Polypro- 34.93 1 O Crimp Gold Nickel Commercial 220187-1 58435-1 220217-1 5228980-5 pylene 1.375 58, 58A, 41.28 O Crimp Gold Nickel PTFE MIL Type — 91901-1 69727- 5225398-1 58B, 58C 1.625 32.13 Single Crimp Gold Silver PTFE MIL Type — 91904-4 69223-1 2-5329456-1 1.265 223, 35.71 O Crimp Gold Nickel PTFE MIL Type — 91901-1 69727- 5225398-3 55, 55A, 55B 1.406 142, 142A, 35.71 O Crimp Gold Nickel PTFE MIL Type — 91901-1 69727- 5225398-6 142B, 400 1.406 124, 140, 210, 62, 62A, 62B, Polypro- 34.93 1 59, 59A, 59B, O Crimp Gold Nickel Commercial 220187-2 58435-1 220217-2 5228980-6 pylene 1.375 BELDEN 9291, 9209, 9269 1 Order Tyco Electronics PRO-CRIMPER Coaxial “O” Crimp Hand Tool assembly 58433-1, which includes dies 58435-1. 0.89 Panel Insulating [.035] 5.46 Bushings for 12.93 ±0.13 14.73 [.215] 0.81 [.509] ±.005 [.580 ] Bulkhead Jacks 13.95 [.032] Dia. Dia. [.549] Material — Nylon Dia. ±0.08 14.1 Note: Can not be used with single ±.003 [.555 ] crimp bulkhead jacks. 17.45 BELDEN is a trademark of Belden Wire 14.58 [.687] Dia. and Cable Company. [.574] Dia. Recommended Panel Cutout BERK-TEK is a trademark of Nexans, Inc. Part No. 330620 (2 Required) COMM/SCOPE is a trademark of Commscope, Inc. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 54 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Plugs, for JIS Cables, Crimp Plating Body — Nickel Center Contact — Gold 14.53 L [.572] Max. Dia. Max. Interchangeable Dies for PRO-CRIMPER Termination Dim. Hand Tool 354940-1 JIS Cable Dielectric Part No. Type Lor PRO-CRIMPER Adapter 679304-1 33.53 3D-2V Hex Crimp Polyethylene 58436-1 3-5221128-1 1.320 Without Solder Terminal With Solder Terminal Bulkhead Solder Jacks, Front Mount Body Plating — Nickel 22.23 [.875] Accepts 1.5 [.059] 9.65/9.75 Accepts 1.5 [.059] Dia. Max. Wire 3/8" - 32 [.380/.384] Dia. Max. Wire Thread Dia. 3/8" - 32 Thread .396/4.04 [.156/.159] L L W W Max. Max. Dia. Max. Recommended Panel Cutout Dia. Max. Part No. Dimensions Contact Panel Insulating Dielectric Without Solder With Solder Material Thickness Bushing LW Terminal* Terminal** 26.93 13.09 1.17-3.18 227223-1 or Silver VALOX 5227754-3 5227755-3 1.060 .515 .046-.125 221951-1 33.33 13.09 1.17-6.35 227223-1 or — 5227169-7 1.312 .515 .046-.250 221951-1 VALOX 26.93 13.09 1.17-3.18 227223-1 or 5227754-2 5227755-2 1.060 .515 .046-.125 221951-1 Gold 33.33 13.09 1.17-6.35 227223-1 or 5227169-4 5227169-8 1.312 .515 .046-.250 221951-1 PTFE 26.93 13.09 1.17-3.18 227223-1 or 5227715-3 5227716-3 1.060 .515 .046-.125 221951-1 33.33 13.09 1.17-6.35 227223-1 or — 5227169-5 1.312 .515 .046-.250 221951-1 Tin VALOX 26.93 13.09 1.17-3.18 227223-1 or 5227754-1 5227755-1 1.060 .515 .046-.125 221951-1 **Includes lockwasher and jam nut. **Includes solder terminal and jam nut. VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 55 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) 4.04 1.09 3.94 Insulating Bushings Max. Max. 1.78 Dia. [.159] 12.7 [.043] [.155] [.070] [.500] 11.43 Dia. [.450] 0.94 10.93 0.81 11.94 Dia. [.030] [.430] [.032] [.470] Max. 14.86 9.53 9.53 15.88 Dia. Dia. Dia. [.585] [.375] [.375] [.625] Part No. 227223-1 Part No. 221951-1 ±0.08 12.83 ±0.08 11.56 ±.003 [.505 ] ±.003 [.455 ] Dia. Dia. ±0.06 ±0.08 10.97 12.07 ±.003 ±.003 [.432 ] [.475 ] Recommended Recommended Panel Cutout Panel Cutout 3/8" - 24 Isolated Bulkhead Solder Jacks, Thread Front Mount +0.13 Accepts 9.91 -0.20 1.5 [.059] Dia. +.005 [.390 ] DIa. Max. -.000 Plating Wire Body — Nickel Dielectric — White VALOX Center Flange & Part +0.08 Contact Thread 3.89 -0.00 No. 31.75 13.09 Dia. Plating Material +.003 Max. [.153 ] [1.250] -.000 [.515] Max. TinVALOX 5227726-1 Panel Thickness 1.17-6.35 [.046-.250] Silver VALOX 5227726-2 Recommended Gold VALOX 5227726-3 Panel Cutout 3/8" - 24 Thread +0.08 9.60 -0.00 Dia. +.003 [.378 ] Plating -.000 Body — Nickel Center Contact — Silver Dielectric — Black VALOX 12.83 [.505] Flange & Thread Material — Max. +0.08 Black VALOX 3.94 -0.00 26.80 +.003 [.155 ] -.000 [1.055] Max. Panel Thickness 1.17-3.18 [.046-.125] Recommended Panel Cutout Part No. 5414194-1 Rubber Sealed Bulkhead Solder Jack, Gasket Rear Mount +0.13 17.78 Dia. 12.83 -0.00 Dia. +.005 [.700] Max. [.505 ] 1/2" - 28 -.000 Thread Plating Accepts . Body — Nickel 1.5 [.059] DIa. Max. Center Contact — Gold Wire Dielectric — Polymethylpentene +0.08 This connector is designed to prevent 5.54 -0.00 +.003 moisture from entering the interface [.218 ] -.000 31.75 Max. from the rear of the connector. [1.250] Maximum Panel Thickness 6.35 [.250] Recommended VALOX is a trademark of General Electric Part No. 5227426-1 Panel Cutout Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 56 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) VALOX Body Metal Body Right-Angle Jacks PC Board/Panel Mount 1/2-28 Thread 1/2-28 Thread C C Mtg. Hgt. Mtg. Hgt. Body — Nickel Dielectric — Polymethylpentene C C L L A A B B 34.93 34.93 [1.375] [1.375] Mounting Post Style Part No. Center Dimensions Body Contact Without With With Material L L ABC Plating Mounting Posts Mounting Posts Compliant Posts 8.59 21.21 15.88 3.48 Tin 5226990-1 5227161-1 —— L .338 .835 .625 .137 VALOX, 8.59 21.21 15.88 3.48 Gold1 5226990-3 5227161-3 —— White .338 .835 .625 .137 6.91 21.21 13.18 3.48 Gold1 — 5227161-7 —— .272 .835 .519 .137 8.59 21.21 15.88 3.48 Tin — 5227161-2 —— .338 .835 .625 .137 Compliant Post 8.59 21.21 15.88 3.48 Gold1 5226990-6 5227161-6 —— .338 .835 .625 .137 VALOX, Black 6.91 21.21 13.18 3.48 Gold1 — 5227161-9 —— .272 .835 .519 .137 6.17 21.21 11.68 Gold1 — 5415046-1 —— — .243 .835 .460 E L 8.26 20.83 15.88 3.48 Tin — 5227661-1 —— .325 .820 .625 .137 8.26 20.83 15.88 3.48 Gold1 5227676-1 5227677-1 —— .325 .820 .625 .137 Metal 6.91 20.83 12.70 3.48 Gold1 1274668-1 5413879-1 —— +0.13 .272 .820 .500 .137 12.83 -0.00 Dia. +.005 6.91 20.83 12.70 3.48 [.505 ] -.000 Gold2 — 5413879-2 —— .272 .820 .500 .137 High Temp. 6.91 21.21 13.18 2.79 Gold1 —— — 5415218-5 Housing .272 .835 .519 .110 Plating: Gold1 — 0.00076 [.000030] thick Gold2 — 0.00127 [.000050] thick +0.08 5.54 -0.00 Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Dia. +.003 [.218 ] -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Lockwasher and Jam Nut Without Mounting Posts With Mounting Posts ±0.08 10.16 2.64 [.104] Dia. ±0.08 10.16 ±0.05 2.01 ±.003 [.400 ] Clearance Hole for ±.003 [.400 ] ±.002 [.079 ] 2-56 Self-Tapping Screw* (2 Holes) (2 Holes) ±0.05 ±0.05 5.08 5.08 ±.002 ±.002 [.200 ] [.200 ] ±0.05 ±0.05 5.08 5.08 Mating Mating ±.002 ±.002 [.200 ] [.200 ] Face Face GS GS ±0.08 ±0.08 0.89 0.89 ±.003 ±.003 [.035 ] [.035 ] Part No. Part No. ±0.05 ±0.05 2.54 2.54 1-329632-2 1-329631-2 ±.002 ±.002 [.100 ] [.100 ] (Top View) (Top View) Recommended PC Board Layouts VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 57 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) VALOX Body Metal Body Vertical Jacks PC Board/Panel Mount L L Plating 1/2-28 Thread 1/2-28 Thread Body — Nickel 15.88 15.88 Dielectric — Polymethylpentene [.625] [.625] B B 34.93 34.93 [1.375] [1.375] +0.13 Mtg. Hgt. Mtg. Hgt. 12.83 -0.00 Dia. +.005 [.505 ] -.000 Part No. Center Body Dim. Dim. +0.08 Without With Contact 5.54 -0.00 Material BL Mounting Mounting Dia. Plating +.003 [.218 ] Posts Posts -.000 21.21 3.48 Tin 5226993-1 5227222-1 Maximum Panel Thickness 6.1 [.240] .835 .137 VALOX, White 21.21 3.48 Recommended Panel Cutout Gold 5226993-3 5227222-3 .835 .137 21.21 3.48 Tin 5226993-2 5227222-2 .835 .137 VALOX, Black 21.21 3.48 Gold 5226993-6 5227222-6 .835 .137 20.83 3.48 Tin — 5227671-1 .820 .137 Lockwasher and Jam Nut Metal 20.83 3.48 Gold — 5227673-1 .820 .137 Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Without Mounting Posts With Mounting Posts Part No. Part No. 1-329632-2 1-329631-2 2.64 [.104] Dia. Clearance Hole ±0.08 2.01 for 2-56 ±0.05 ±0.05 5.08 5.08 ±.003 [.079 ] Self-Tapping ±.002 ±.002 [.200 ] [.200 ] (2 Holes) Screw* (2 Holes) ±0.05 ±0.05 5.08 5.08 ±.002 ±.002 [.200 ] [.200 ] ±0.05 2.54 ±0.05 2.54 ±.002 [.100 ] ±.002 ±0.08 [.100 ] 10.16 ±0.08 10.16 ±.003 [.400 ] ±.003 [.400 ] ±0.08 ±0.08 GS 0.89 0.89 GS ±.003 ±.003 ±0.08 [.035 ] [.035 ] 10.16 ±0.08 10.16 ±.003 [.400 ] ±.003 [.400 ] (Top View) (Top View) Recommended PC Board Layouts * Screw for board thickness of 2.38 [.093] or greater Part No. 221108-2. Screw for thickness of less than 2.38 [.093] Part No. 221108-4. VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 58 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jacks with Mounting Flanges PC Board/Panel Mount 1/2-28 Thread 15.88 [.625] Mounting Height +0.13 12.83 -0.00 Dia. +.005 [.505 ] -.000 8.59 C L [.338] 21.21 34.93 [.835] [1.375] +0.08 5.54 -0.00 Dia. +.003 [.218 ] -.000 Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Body Center Contact Part No. Material Plating Tin 5226978-1 VALOX, White Gold 5226978-3 Lockwasher and Jam Nut 3.3 [.130] Dia. Clearance Hole for 5-40 Screw ±0.08 22.86 ±.003 [.900 ] Mating 8.89 Face 11.43 [.350] [.450] Part No. Part No. 2.54 1-329632-2 1-329631-2 G S [.100] ±0.08 0.89 ±.003 [.035 ] (Top View) Recommended PC Board Layout VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 59 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Vertical Metalized Jacks PC Board Mount Body Center Leg Recommended PC Board Layouts Dielectric Style Part No. Plating Contact Plating Length L 6.35 Style A Silver VALOX A 5227699-1 .250 L 6.35 Gold VALOX A 5227699-2 ±0.08 12.7 .250 ±.003 [.500 ] 6.35 TinVALOX A 5227699-3 ±0.05 .250 6.35 Nickel ±.002 [.250 ] 3.81 1 Gold VALOX A 5414460-1 .150 4.45 Silver VALOX C 5222420-1 .175 ±0.08 12.7 17.45 ±.003 6.35 [.500 ] Sq. Gold VALOX E 5415189-1 [.687] .250 15.88 3.30 PTFE Drill Holes for ±0.05 Gold B 5413969-2 6.35 [.625] .130 ±0.05 ± .002 0.94 [.037 ] ±.002 [.250 ] 3.18 Dia. Pin (5 Places) Tin-Lead Silver VALOX C 5414305-1 .125 3.43 Gold VALOX D 5221123-2 .135 1 With .76 [.030] standoffs on top of legs. Style B L ±0.08 6.88 ±.003 [.271 ] ±0.08 1.50 ±0.08 3.44 Dia. ±.003 [.059 ] ±.003 [.135 ] (4 Holes) ±0.08 6.88 ±.003 [.271 ] 20.57 [.810] ±0.08 3.43 ±0.08 1.02 Dia. ±.003 [.135 ] ±.003 [.040 ] Style C Style D ±0.05 6.88 L ±.003 [.271 ] ±0.08 2.44 Dia. ±0.05 ±.003 L 1.07 [.096 ] Dia. ±0.05 3.43 ±.002 [.042 ] (4 Holes) 4.32 ±.002 [.135 ] [.170] ±0.05 1.73 Dia. ±0.05 6.88 6.48 ±.002 [.068 ] ±0.08 1.32 ±.003 [.271 ] [.255] Dia. ±.003 [.052 ] 3.73 15.88 [.147] 7.47 16.64 [.625] [.294] [.655] Style E (Panel Mount) �0.08 12.70 ±.003 [.500 ] ±0.06 6.35 ±.002 [.250 ] Drill Hole to Receive �0.06 0.94 20.78 �0.38 ±.002 [.037 ] [.818 �.015] Dia. Pin, 5 Required L �0.08 12.70 ±.003 VALOX is a trademark of General Electric [.500 ] Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 60 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) ± 0.08 Vertical Metalized Jacks, 7.50 Signal Contact Hole ± .003 [.295 ] PC Board Mount 24.00 ± 0.08 Switching 1.00 [.945] ± .003 Contact [.039 ] ± 0.10 Hole 1.70 2 Plcs. ± .004 [.067 ] ± 0.08 2.50 ± 0.25 ± .003 10.72 [.098 ] ± 0.10 3.00 ± .010 [.422 ] 4 Plcs. ± .004 [.118 ] ± 0.08 1.50 ± .003 ± 0.08 [.059 ] 10.70 ± .003 2 Plcs. [.421 ] Part No. 1274314-1 Recommended (Switching) PC Board Layout ± 0.08 3.75 ± .003 [.148 ] ± 0.08 1.00 24.00 ± .003 [.039 ] ± 0.10 1.70 [.945] ± .004 ± 0.08 [.067 ] 2.50 ± .003 [.098 ] 3 Plcs. ± 0.10 ± 0.25 3.00 10.72 ± .004 ± .010 [.118 ] [.422 ] ± 0.08 1.50 ± .003 ± 0.08 [.059 ] 10.70 ± .003 2 Plcs. [.421 ] Part No. 1274315-1 Recommended PC Board Layout Body Contact Part Dielectric Plating Plating No. Tin Silver Polyphenylene 6274314-1 Tin Silver Polyphenylene 6274315-1 Press Fit Vertical Metalized Jack, Insulating Bushing PC Board Mount Material — Polypropylene Part No. 222163-1 ±0.05 Only to be used on Part Nos. 5222006-1 6.88 11.94 Dia. ±.002 [.271 ] & 5222462-1 [.470] Max. +0.08 1.5 -0.10 ±0.05 3.43 +.003 [.059 ] ±.002 [.135 ] -.004 Dia. 4 Holes 14.61 11.94 ±0.05 Dia. Dia. 6.88 [.575] [.470] ±0.08 1.02 ±.002 [.271 ] Dia. ±.003 [.040 ] 20.57 2.96 [.810] Max. [.115] Max. Recommended PC Board Layout 6.61 PC Board Thickness Not Less Than 0.99 [.093] Max. [.260] Part No. 5222006-1 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 61 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Right-Angle Metalized Jacks, PC Board Mount ± 0.08 10.97 [.432] 6.6 ± .003 Mounting Height [.260 ] Body Center Part Dielectric Plating Contact Length No. ± 0.08 3.3 ± 0.08 2.11 Polymethyl- 4.34 ± .003 [.130 ] Nickel 5413631-1* ± .003 [.083 ] pentene .171 Dia. 4.34 (4 holes) PTFE Tin 5413631-2* ± 0.08 6.6 .171 ± 0.08 ± .003 1.17 [.260 ] C Dia. Polymethyl- 3.33 L 6.15 ± .003 ± 0.51 [.046 ] 27.64 Nickel 5413631-3* pentene .131 [.242] ± .020 [1.088 ] Maximum PC Board Thickness 2.54 [.100] Recommended PC Board Layout ±0.18 1.19 Dia. ±.007 ±0.08 [.047 ] 3.81 ±.003 [.150 ] 8.64 [.340] ±0.08 7.62 ±.003 [.300 ] Part Body Dielectric Contact No. Nickel TPX Gold 5414373-1 21.85 [.860] 25.40 ±0.08 7.62 ±0.08 1.78 Dia. [1.000] ±.003 [.300 ] ±.003 [.070 ] 2 Holes Recommended PC Board Layouts ± 0.08 6.6 Right-Angle Metalized Jacks, ± .003 [.260 ] PC Board/Panel Mount ± 0.08 3.3 ± 0.08 2.11 ± .003 [.130 ] Dia. Body Part ± .003 [.083 ] Dielectric Plating No. ± 0.51 27.64 4 holes ±.020 [1.088 ] Tin PTFE 5415025-2 ± 0.08 6.6 ± .003 ± 0.08 Tin TPX 5415025-1 [.260 ] 1.17 Dia. ± 0.25 ± .003 6.15 [.046 ] ±.010 [.242 ] ± 0.18 11.66 10.97 +0.13 12.83 -0.00 ±.007 [.459] [.432 ] Dia. +.005 [.505 ] -.000 1/2-28 Thread 4.34 [.171] +0.08 5.64 -0.00 Dia. +.003 [.222 ] -.000 Lockwasher and Jam Nut see page 59. Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout TPX is a trademark of Mitsui Chemicals America, Inc. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 62 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Style A Style B Style C Tee Adapters (Jack-Plug-Jack) With Insulated (Jack-Jack-Jack) Cover (Jack-Plug-Jack) D Insulation Material D D Polyphenylene oxide F E E E F Body Center Contact Comparable Packaging Dimensions Style Material Material Dielectric UG/U No. Part No. and Plating and Plating DE F Connector Per Pkg. Brass, BE CU, Gold 32.54 26.19 14.27 Bulk PTFE 274A 221543-2 2 Nickel (30) 1.281 1.031 .562 (100) PH BR, Gold 33.02 27.31 14.50 Bulk Acetal — 5413592-2 2 (15) 1.300 1.075 .571 (100) BE CU, Gold 33.02 27.31 14.50 Bulk Acetal — 5413592-6 A 2 (30) 1.300 1.075 .571 (100) Zinc, Nickel PH BR, Gold 33.02 27.31 14.50 Individual Acetal — 5413592-9 2 3 (15) 1.300 1.075 .571 (1) BE CU, Silver 33.02 27.31 14.50 Individual Acetal — 1-5413592-1 2 (200) 1.300 1.075 .571 (1) Zinc, BE CU, Gold 32.54 31.12 17.15 1 Bulk 1 — 5413366-2 B Acetal 2 Nickel (30) 1.281 1.225 .675 (100) Brass, BE CU, Silver 32.54 23.37 Bulk PTFE —— 221988-1 2 Nickel (200) 1.281 .920 (100) C Zinc, PH BR, Gold 32.54 23.62 Bulk Acetal —— 5414311-1 2 Nickel (50) 1.281 .930 (100) 1 Gray insulation cover 2 (Microinches min thickness) 3 (Special graphics) Tee Adapter Covers ±0.76 114.55 ± .030 [4.510 ] Material — Polypropylene, general purpose Part Color No. Black 221586-1 Ivory 221586-3 5.08 Dia. 15.11 [.200] Dia. [.595] Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 63 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Jack-Jack Adapters Style B Style A Center Body Contact Dielectric Style Part No. Plating Plating Nickel Silver PTFE A 221551-1 35.81 Nickel Gold PTFE A 221551-3 32.54 [1.410] Polymethyl- [1.281] Nickel Gold B 5414414-1 pentene Bulkhead Jack-Jack Adapters Center Dimensions Body Contact Dielectric Part No. Plating HL Plating +0.13 12.83 -0.00 Dia. 17.45 38.10 +.005 [.505 ] Nickel Silver PTFE 330024- -.000 .687 1.500 17.78 36.07 Poly- Nickel Gold1 5228226-1 .700 1.420 ethylene L H 17.78 36.07 Poly- Max. Nickel Gold2 5228226-3 Max. .700 1.420 ethylene Plating: +0.06 Gold1 — 0.00127 [.000050] thick Gold2 — 0.00076 [.000015] thick 5.54 -0.00 +.003 [.218 ] Note: If an Insulating Bushing is required see part number 330620 and -.000 Panel Cutout on page 54. Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points. +0.13 Isolated Bulkhead Jack-Jack 12.83 -0.00 Dia. +.005 [.505 ] Adapter -.000 Center Body Contact Dielectric Part No. Plating Plating +0.06 Nickel Gold Polymethylpentene 5414105-1 36.07 5.54 -0.00 Dia. 15.87 +.003 [1.420] [.218 ] -.000 [.625] Recommended Panel Cutout H= 11/16 across flats, 20.32 [.800] across points. Plug-Plug Adapter Contact Body Part No. Plating Plating Gold Nickel 415796-1 31.8 Ref. [1.252] Right-Angle Adapters 14.53 Dia [.572] Max. (Jack-Plug) Center Body Contact Dielectric Part No. Plating Plating Nickel Silver PTFE 5329517-1 22.89 Nickel Gold PTFE 5222165-2 [.901] 26.97 Nickel Gold Polymethylpentene 5414666-1 Max. [1.062] Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 64 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 50 Ohm (Continued) Terminator Plugs 50, 75, 93 Ohm Part No. Resistor Specification Tether With Tether Without Tether Plating 1 1 Watt, 50 Ohm 5221629-1 5221629-4 Body — Nickel 1 1 Watt, 75 Ohm 5221629-2 5221629-5 Center Contact — Gold 1 Watt, 93 Ohm — 5221629-6 Dielectric — Polyethylene 0.5 Watt, 75 Ohm — — 1 1 Watt, 50 Ohm 1-5221629-6 — 14.53 Dia. 33.02 1 Tether is conductive with #4 stud size [.572] Max. [1.300] #6 Stud Size Insulated Long Cover Terminators Insulation Material Polyphenylene oxide 38.10 38.10 Max. Max. [1.500] [1.500] 17.40 17.40 [.685] Short Cover* [.685] Register Cover Part Color Specification Style No. Long 5413557-1 Gray 1 Watt, 50 Ohm Short 5413364-2 Black Long 5413557-2 * The Short Cover is required when mating the Terminator with a Tee Adapter. Jack Covers Shorting Caps 22.10 Max. [.870] 14.53 Dia. Plating [.572] Max. Body — Nickel Body Plating Part No. Center Contact — Gold Silver 330022 Nickel 1-330022-2 15.24 [.600] 101.6 [4.000] 14.53 #6 Stud Size [.572] Dia. Max. Part No. 413453-1 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 65 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm Hex and O Crimp Plugs, Crimp These connectors have been designed for optimum performance and have a true 75 ohm impedance the complete length of the connector. The crimp die 14.53 tooling listed below is different from the L [.572] Max. equivalent 50 ohm connectors. Dia. Max. Plugs Interchangeable Dies for Interchangeable Center PRO-CRIMPER Dies for Hand RG/U Termination Body Dim. Contact Dielectric Style Hand Tool Tool 69710-1 Part No. Cable Type Plating L Plating 354940-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 29.46 179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 58425-2 — 5413589-8 1.160 179B, 187, 187A, 161, 35.56 O Crimp Gold Nickel Polyethelene Commercial 318451-2 — 5221185-8 BELDEN 9221 1.140 29.46 Hex Crimp Gold Nickel Polyethelene Commercial 58425-2 — 1-5413589-0 1.160 AT&T 735A 27.69 O Crimp Gold Nickel Polyethelene Commercial 58174-1 58248-3 1-5221185-8 1.090 29.46 Hex Crimp Gold Nickel Polyethelene Commercial 58425-2 — 5413589-3 1.160 BELDEN 8218 27.69 O Crimp Gold Nickel Polyethelene Commercial 58174-1 58248-3 5221185-3 1.090 29.46 140, 210, 62, 62A, Hex Crimp Gold Nickel Polyethelene Commercial 58425-1 — 5413589-2 1.160 62B, 59, 59A, 59B, BELDEN 9291, 27.69 O Crimp Gold Nickel Polyethelene Commercial 58536-1 58248-2 5221185-2 9209, 9269 1.090 302, BELDEN 89269, 88241, Hi-Temp 62A, 29.46 Hex Crimp Gold Nickel Polyethelene Commercial 58425-1 — 5413589-1 Times PL-62, Berk Tek 1.160 BTDC-59, BTDC-62 BELDEN 8212, 9104, 29.46 Hex Crimp Gold Nickel Polyethelene Commercial 58425-1 — 5413589-9 9112, 9167, 9240, 9259, 1.160 9266, Times FM-59, 27.69 (RG 59 Type O Crimp Gold Nickel Polyethelene Commercial 58536-1 58248-2 5221185-9 1.090 with 20 AWG C.C.) 29.46 Hex Crimp Gold Nickel Polyethelene Commercial 58425-1 — 5413589-7 1.160 BELDEN 9145, AT&T 734A 27.69 O Crimp Gold Nickel Polyethelene Commercial 58536-1 — 1-5221185-0 1.090 BELDEN 9248, 25.65 O Crimp Gold Nickel Polyethelene Commercial 58536-1 — 5221185-1 9114 1.010 37.85 6, 6A O Crimp Gold Nickel Polyethelene Commercial 58538-1 58248-1 5221185-7 1.490 BELDEN 8281, 29.46 58425-3 Hex Crimp Gold Nickel Polyethelene Commercial — 5413589-5 9141, 9231, 1.160 Western 28.45 Electric 724, O Crimp Gold Nickel Polyethelene Commercial 58538-1 58248-1 5221185-5 1.120 728, 3049 COMM/SCOPE 28.96 O Crimp Gold Nickel Polyethelene Commercial 58536-1 — 2-5221185-9 S59 Hec 1.140 COMM/SCOPE 28.96 O Crimp Gold Nickel Polyethelene Commercial 58536-1 — 3-5221185-1 F59 Hec-z 1.140 AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. COMM/SCOPE is a trademark of Commscope, Inc. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 66 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Plugs for JIS Cables, Crimp Plating Body — Nickel Center Contact — Gold 14.53 L [.572] Max. Dia. Max. Interchangeable Dies for PRO-CRIMPER Termination Dim. Hand Tool 354940-1 JIS Cable Dielectric Part No. Type Lor PRO-CRIMPER Adapter 679304-1 29.46 3C-2V Hex Crimp Polymethylpentene 58425-1 1-5413589-1 1.160 29.46 2.5C-2V Hex Crimp Polymethylpentene 58425-2 1-5413589-6 1.160 Bulkhead Jacks for JIS Cables, Crimp Plating Body — Nickel Center Contact — Gold 20.32 L Dielectric — Polymethylpentene [.800] Max. Max. Interchangeable Dies for PRO-CRIMPER Termination Dim. Hand Tool 354940-1 JIS Cable Dielectric Part No. Type Lor PRO-CRIMPER Adapter 679304-1 36.83 1.5C-2V Hex Crimp 75Ω 58425-2 5413590-4* 1.450 *Packaged in 100 pieces per bag. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 67 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Hex and O Crimp Right-Angle Plugs, Crimp 27.18 Max. [1.070] L Max. 14.53 Dia. [.572] Max. Interchangeable Dies for Interchangeable Center PRO-CRIMPER Dies for Hand RG/U Termination Body Dim. Contact Dielectric Style Hand Tool Tool 69710-1 Part No. Cable Type Plating L Plating 354940-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 179, 179A, 179B, 187, Polymethyl- 39.45 Hex Crimp Gold Nickel Commercial 58425-2 — -5413588-8 187A, 161 pentene 1.553 BELDEN 9221 Polymethyl- 39.45 AT&T 735A Hex Crimp Gold Nickel Commercial 58425-2 — 1-5413588-0 pentene 1.553 AT&T KS 19224 L2, Polymethyl- 39.45 Hex Crimp Gold Nickel Commercial 58425-2 — 5413588-4 RD179 pentene 1.553 Double Braid 140, 210, 62, 39.45 Polymethyl- 1 58425-1 5413588-2 Hex Crimp Gold Nickel Commercial — 62A, 62B, 59, 1.553 pentene 59A, 59B, Polymethyl- BELDEN 9291, 39.88 O Crimp Gold Nickel Commercial 5221402-2 58536-1 58248-2 - pentene 9209, 9269 1.570 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, Polymethyl- 39.45 Hex Crimp Gold Nickel Commercial 58425-1 — 5413588-9 Times FM-59, pentene 1.553 (RG 59 Type with 20 AWG C.C.) BELDEN 9145, Polymethyl- 39.88 O Crimp Gold Nickel Commercial 58536-1 — 5221402-4 AT&T 734A pentene 1.570 AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 68 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Hex and O Crimp Jacks, Crimp 11.08 Dia. [.436] Max. L Max. Interchangeable Dies for Interchangeable Center PRO-CRIMPER Dies for Hand RG/U Termination Body Dim. Contact Dielectric Style Hand Tool Tool 69710-1 Part No. Cable Type Plating L Plating 354940-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 33.02 179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 58425-2 — 5413760-8 1.300 179B, 161, 187, 187A, 30.48 O Crimp Gold Nickel Polyethelene Commercial 318451-2 — 5221199-5 BELDEN 9221 1.200 33.02 BELDEN 8218 Hex Crimp Gold Nickel Polyethelene Commercial 58425-2 — 5413760-3 1.300 140, 210, 62, 62A, 62B, 59, 30.48 59A, 59B, O Crimp Gold Nickel Polyethelene Commercial 58536-1 58248-2 5221199-2 1.200 BELDEN 9291, 9209, 9269 302, BELDEN 88241, 89269, Hi-Temp 62A, Times 33.02 Hex Crimp Gold Nickel Polyethelene Commercial 58425-1 — 5413760-1 PL-62, Berk 1.300 Tek BTDC-59, BTDC-62 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, 33.02 Hex Crimp Gold Nickel Polyethelene Commercial 58425-1 — 5413760-9 Times FM-59, 1.300 (RG 59 Type with 20 AWG C.C.) BELDEN 9248, 30.48 O Crimp Gold Nickel Polyethelene Commercial 58536-1 — 5221199-1 9114 1.200 BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 69 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Hex and O Crimp Bulkhead Jacks, Crimp +0.13 12.83 -0.20 Dia. +.005 [.505 ] -.000 +0.08 5.54 -0.00 34.93 Max. 20.32 +.003 [.218 ] [1.375] -.000 [.800] Max. Maximum Panel Thickness 6.1 [.240] Recommended Panel Cutout Interchangeable Dies for Interchangeable Center PRO-CRIMPER Dies for Hand RG/U Termination Body Dim. Contact Dielectric Style Hand Tool Tool 69710-1 Part No. Cable Type Plating L Plating 354940-1 or & 626 Pneu. PRO-CRIMPER Head 318161-1 Adapter 679304-1 36.83 179, 179A, Hex Crimp Gold Nickel Polyethelene Commercial 58425-2 — 5413590-8 1.450 179B, 161, 187, 187A, 34.93 O Crimp Gold Nickel Polyethelene Commercial 318451-2 — 5221221-5 BELDEN 9221 1.375 AT&T KS 19224 L2, 36.83 Hex Crimp Gold Nickel Polyethelene Commercial 58425-2 — 5413590-4 RD179 1.450 Double Braid 36.83 BELDEN 8218 Hex Crimp Gold Nickel Polyethelene Commercial 58425-2 — 5413590-3 1.450 140, 210, 62, 62A, 62B, 59, 34.93 59A, 59B, O Crimp Gold Nickel Polyethelene Commercial 58536-1 58248-2 5221221-2 1.375 BELDEN 9291, 9209, 9269 BELDEN 8212, 9104, 9112, 9240, 9167, 9259, 9266, 34.93 O Crimp Gold Nickel Polyethelene Commercial 58536-1 58248-2 5221221-7 Times FM-59 1.375 (RG 59 Type with 20 AWG C.C.) BELDEN 9114, 34.93 O Crimp Gold Nickel Polyethelene Commercial 58536-1 — 5221221-1 9248 1.375 AT&T is a trademark of AT&T Corporation. BELDEN is a trademark of Belden Wire and Cable Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 70 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Bulkhead Solder Jacks Front Mount Accepts Accepts .054 Dia. 27.43 Max. Max. .054 Dia. Max. Wire 27.43 [1.083] Max. Wire Plating [1.083] Body — Nickel Center Contact — Silver 3/8-32 Thread 3/8-32 Thread 9.75/9.65 [.384./380] 13.09 Dia. Dia. 13.09 Dia. [.515] Max. [.515] Max. Part No. 5415187-1 Part No. 5221244-1 4.04/3.96 (without Solder Terminal) (with Solder Terminal) [.159/.156] Maximum Panel Thickness 3.18 [.125] Note: If insulating bushing required Note: If insulating bushing required Recommended Panel Cutout use part no. 227223-1 or 221951-1 use part no. 227223-1 or 221951-1 (for details, reference page 55). (for details, reference page 55). Bulkhead Jack 3.30 ± 0.1 Ş 12.70 [.130] PC Board Mount 11.07 ± .004 [.500 ] Max. [.436] 20.8 ± 0.1 11.2 [.820] ± .004 [.441 ] Part No. 6274086-1 Accepts . Bulkhead Solder Jack .050 Dia. Rear Mount Max. WIre +0.13 12.83 -0.00 Lockwasher and Jam Nut see page 73. Dia. 17.78 Dia. +.005 [.505 ] 1/2-28 Thread -.000 [.700] Max. Plating Body — Nickel Center Contact — Gold +0.08 Dielectric — Polymethylpentene 5.54 -0.00 +.003 [.218 ] 31.75 -.000 Max. [1.250] Maximum Panel Thickness 6.35 [.250] Recommended Panel Cutout Part No. 5414217-1 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 71 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) VALOX Body Metal Body Right-Angle Jacks PC Board/Panel Mount 1/2-28 Threads 1/2-28 Threads C C Mtg. Hgt. Mtg. Hgt. Outer Shell — Nickel Dielectric — Polymethylpentene Lockwasher and Jam Nut see page 73. C C L L A A B 34.93 B 34.93 [1.375] [1.375] +0.13 Part No. Center 12.83 -0.00 Dimensions Body Dia. +.005 Contact [.505 ] Without With -.000 Material ABC L Plating Mounting Posts Mounting Posts VALOX, Black w/ * 6.17 21.21 11.68 2.79 Compliant Posts Gold3 — 5415105-2 .243 .835 .460 .110 (Economy)* VALOX, * 6.17 21.21 11.68 4.01 Black Gold3 — 5415105-1 L .243 .835 .460 .158 +0.13 (Economy)* 5.54 -0.00 +.005 [.218 ] VALOX, 6.91 21.21 13.88 3.48 -.000 Gold1 — 5413194-1 White .272 .835 .519 .137 Maximum Panel Thickness 6.1 [.240] VALOX, * 6.91 21.21 13.88 3.48 White Gold1 — 5415634-2 Recommended Panel Cutout .272 .835 .519 .137 (Economy)* VALOX, 6.91 21.21 13.88 3.48 Gold1 — 5413194-2 Black .272 .835 .519 .137 6.91 21.21 13.88 3.48 Gold1 — 5415634-1 VALOX, .272 .835 .519 .137 Black 8.59 21.21 15.88 3.48 Recommended PC Board Layouts (Economy)* Gold1 — 5415633-1 .338 .835 .625 .137 VALOX, 8.59 21.21 15.88 3.48 Without Mounting Posts Gold2 — 5414459-1 White .338 .835 .625 .137 8.25 20.83 15.88 2.16 ±0.08 10.16 2.64 [.104] Dia. Metal Gold1 — 5222092-1 .325 .820 .625 .085 ±.003 [.400 ] Clearance Hole for 2-56 Self-Tapping Screw* 8.25 20.83 15.88 Metal Gold1 — 5222093-1 — (2 Holes) .325 .820 .625 ±0.05 5.08 ±.002 Metal 8.25 20.83 15.88 3.48 [.200 ] Gold1 — 5414409-1 (Economy)* .325 .820 .625 .137 ±0.05 5.08 Mating ±.002 [.200 ] 6.91 20.83 12.70 3.48 Face Metal with Gold1 — 5415417-1 .272 .820 .500 .137 Compliant GS ±0.08 0.89 Posts ±.003 8.56 21.21 15.88 3.48 [.035 ] Tin — 5415419-1 ±0.05 (Economy)* 2.54 .337 .835 .625 .137 ±.002 [.100 ] (Top View) 8.25 20.83 15.88 3.48 Metal Gold1 — 5222092-3 .325 .820 .625 .137 6.91 20.83 12.70 3.48 Metal Gold1 — 5414907-1 .272 .820 .500 .137 With Mounting Posts 6.91 20.83 12.70 Metal Gold1 — 6274072-1 — ±0.08 .272 .820 .500 10.16 ±0.08 2.01 ±.003 [.400 ] ±.003 Metal 6.91 20.83 12.70 3.48 [.079 ] Gold1 — 6274084-1 (Economy)* .272 .820 .500 .137 (2 Holes) ±0.05 5.08 **Economy connector uses 50 Ω part with smaller dielectric and stamped and formed con- ±.002 [.200 ] tact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω, ±0.05 5.08 Mating screw machined Beryllium Copper). ±.002 [.200 ] Face Plating: GS ±0.08 0.89 Gold1 — 0.00076 [.000030] thick ±.003 [.035 ] Gold2 — 0.00127 [.000050] thick ±0.05 2.54 Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on ±.002 [.100 ] (Top View) page 54. * Screw for panel thickness of 2.38 [3/32] or greater * Part No. 221108-2. * Screw for panel thickness of less than 2.38 [3/32] * Part No. 221108-4. VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 72 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) VALOX Body Metal Body Vertical Jacks L L PC Board/Panel Mount Plating 1/2-28 Thread 1/2-28 Thread 15.88 15.88 Outer Shell — Nickel [.625] [.625] Dielectric — Polymethylpentene B B 34.93 34.93 [1.375] [1.375] Mtg. Hgt. Mtg. Hgt. +0.13 12.83 -0.00 Dia. +.005 Body Contact Dim. Dim. [.505 ] Part No. -.000 Material Plating B L VALOX, 21.21 3.48 Black Gold1 5415632-1 .835 .137 (Economy)* VALOX, 21.21 3.48 White Gold1 5415632-2 .835 .137 +0.13 (Economy)* 5.54 -0.00 +.005 20.83 3.48 [.218 ] Metal Gold1 5222132-1 -.000 .820 .137 Maximum Panel Thickness 6.1 [.240] Metal 21.21 3.48 Tin 5415520-1 (Economy)* .835 .137 Recommended Panel Cutout *Economy connector uses 50 Ω part with smaller dielectric and stamped and formed contact, Phosphor Bronze contact material (Compare to regular connector which is 75 Ω, screw machined Beryllium Copper). Plating: Gold1 — 0.00076 [.000030] thick Note: If an Insulating Bushing is required see part number 330620 and Panel Cutout on page 54. Lockwasher and Jam Nut Part No. Part No. ±0.08 2.01 1-329632-2 1-329631-2 ±0.05 5.08 ±.003 [.079 ] ±.002 [.200 ] (2 Holes) ±0.05 5.08 ±.002 [.200 ] ±0.05 2.54 ±.002 [.100 ] * Screw for panel thickness of 2.38 ±0.08 10.16 [3/32] or greater ±.003 [.400 ] ±0.08 0.89 GS * Part No. 221108-2. ±.003 [.035 ] ±0.08 10.16 * Screw for panel thickness of less ±.003 [.400 ] than 2.38 [3/32] * Part No. 221108-4. (Top View) Recommended PC Board Layout VALOX is a trademark of General Electric Company. Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 73 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Style A Style B Style C Vertical Metalized Jacks L PC Board Mount L L Plating Dielectric — PTFE 17.45 Sq. 20.57 [.687] 16.64 [.810] [.655] 15.88 [.625] ±0.08 ±0.08 6.88 12.7 ±0.05 ±.003 6.88 ±.003 [.271 ] [.500 ] ±.003 [.271 ] ±0.08 2.44 Dia. ±0.05 6.35 ±0.08 3.44 ±.003 [.096 ] ±0.08 1.50 ±.002 [.250 ] ±.003 ±0.05 [.135 ] 3.43 (4 Holes) ±.003 [.059 ] Dia. ±.002 [.135 ] (4 Holes) ±0.08 ±0.05 6.88 6.88 ±0.08 12.7 ±.003 ±.003 [.271 ] [.271 ] ±0.08 1.32 ±.003 [.500 ] Dia. ±.003 [.052 ] ±0.05 ±0.08 6.35 3.43 ±0.08 1.02 Drill Holes for ±.002 Dia. ±.003 [.250 ] [.135 ] ±.003 ±0.05 ±.002 [.040 ] 0.94 [.037 ] Dia. Pin (5 Places) Recommended PC Board Layout Center Leg Body Style F (Push-On) Contact Style Length Part No. Plating Plating L ± 0.08 5.16 3.30 ± .003 ± 0.076 [.203 ] Nickel Gold B 6274291-2 2.578 .130 ± .0030 [.1015 ] 3.30 Tin Gold B 6274291-1 .130 ± 0.08 1.02 Dia. ± .003 6.35 [.040 ] Tin Gold B 6274359-1 14.73 .250 [.580] 4.44 Tin Gold C 5414394-1 ± 0.08 .175 5.16 ± 0.05 2.06 Dia. ± .003 [.203 ] 6.35 2.54 ± .002 [.081 ] 4 Plcs. Nickel Silver A 5413986-1 5 Plcs. .250 [.100] 2.54 Tin Gold F 6274360-1 .100 ±0.1 6.88 Press Fit +.003 [.271 ] –.004 ±0.1 11.49 Dia. 1.5 Vertical Metalized Jacks Dia. +.004 [.470] Max. [.059 ] –.003 ±0.05 PC Board Mount 3.43 (4 Plated-Thru ±.002 [.135 ] Holes) Dim. Part A No. ±0.05 6.88 20.57 ±.002 5222462-1 [.271 ] .810 16.26 5414088-1 .640 ±0.08 1.02 A Max. Dia. ±.003 [.040 ] (Plated-Thru Hole) Recommended PC Board Layout Insulating Bushing 11.94 14.61 [.470] Dia. Material — Nylon [.575] Dia. Part No. 222163-1 Only to be used on Part Nos. 5222462-1 and 5222006-1 2.96 Max. [.115] 6.61 Max. [.260] Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 74 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Press Fit ±0.05 1.7 Dia. ±.002 [.067 ] ±0.05 Vertical Metalized Jacks 12.7 (2 Places) ±.002 [.500 ] 17.48 PC Board Thickness (Min.) Part No. PC Board Mount Sq. For Drive Screw [.688] ±0.05 2.36 6.35 (Continued) 5221336-3 ±.002 .093 [.250 ] 3.17 ±0.08 1.02 5221336-4 .125 ±.003 [.040 ] ±0.05 12.7 (Plated-Thru ±.002 [.500 ] Hole 3 Places) 15.88 Max. [.625] ±0.05 6.35 ±.002 [.250 ] Recommended PC Board Layout 6.88 Press Fit, Bulkhead [.271] ± 0.51 4.37 10.80 Vertical Metalized Jack ± .020 [.172 ] 3.43 [.425] 3.43 5 Plcs. [.135] + 0.13 ş 12.83 [.135] includes hardware – 0.00 + .005 [ş .505 ] – .000 28.78 [1.133] 24.41 + 0.08 5.54 [.961] – 0.00 6.88 + .003 [.218 ] [.271] – .000 ± 0.08 Ş 1.02 ± .003 [.040 ] Holes Plated Through 5 Plcs. Part No. 6274124-2 Recommended PC Board Layout Right-Angle Metalized Jacks PC Board Mount 10.97 [.432] Center Body Contact Part No. Mounting Dielectric Contact Plating Plating Height Dimension Nickel TPX Gold2 .171 [.007] 5413558-1 Tin PTFE Gold2 .171 [.007] 5413558-2 Nickel TPX Gold2 .131 [.005] 5413558-3 ± 0.08 6.6 Nickel TPX Gold1 .171 [.007] 5413558-5 C L 6.15 ± .003 [.260 ] 28.4 [.242] Max. Gold1 — 0.00076 [.000030] thick [1.118] ± 0.08 ± 0.08 3.3 2.11 Gold2 — 0.00127 [.000050] thick ± .003 ± .003 [.130 ] [.083 ] Dia. (4 holes) ± 0.08 6.6 ± 0.08 ± .003 1.17 [.260 ] Dia. ± .003 [.046 ] Maximum PC Board Thickness 2.54 [.100] Recommended PC Board Layout ± 0.43 11.43 ± .017 [.450 ] ± 0.08 3.81 ± 0.18 1.19 ± .003 [.150 ] Dia. ± .007 [.047 ] ± 0.08 11.07 7.62 17.78 Max. 21.84 ± .003 [.436] [.300 ] [.700] [.860] ± 0.38 ± 0.08 25.40 1.78 ± 0.08 Dia. 7.62 ± .015 ± .003 [1.000 ] [.070 ] ± .003 [.300 ] TPX is a trademark of Mitsui Chemicals America, Inc. Part No. 6274127-1 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 75 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) ± 0.51 +0.13 27.64 12.83 Right-Angle Metalized -0.00 ±.020 [1.088 ] +.005 [.505 ] Jacks -.000 Dia. ± 0.25 PC Board/Panel Mount 6.15 ±.010 [.242 ] ± 0.18 11.66 10.97 ±.007 [.459] [.432 ] +0.08 5.64 -0.00 +.003 [.222 ] -.000 1/2-28 Thread 4.34 Maximum Panel Thickness 6.35 [.250] [.171] Recommended Panel Cutout Body Dielectric Part No. Plating Tin PTFE 6274425-2 Bulkhead Jack-Jack Right-Angle Adapter (Jack-Plug) Adapter Plating Plating Body — Nickel Body — Nickel Center Contact —Gold Center Contact —Gold Dielectric — Dielectric — Polymethylpentene 14.53 Dia. +0.13 12.83 Polymethylpentene [.572] Max. -0.00 +.005 [.505 ] -.000 Dia. 22.89 +0.08 5.54 [.901] -0.00 36.07 Max. +.003 [.218 ] 11/16 26.97 [1.420] -.000 [1.062] Maximum Panel Thickness 6.35 [.250] Part No. 5222117-1 Recommended Panel Cutout Part No. 5415020-1 Bulkhead Jack-Jack Jack-Jack Adapter Adapter Plating Plating Body — Nickel Center Contact — Gold Body — Nickel Dielectric — Polymethylpentene Center Contact — Gold Dielectric — Polymethylpentene 36.04 +0.13 36.07 12.83 Max. Max. -0.00 [1.419] [1.420] +.005 [.505 ] -.000 Dia. ± 0.25 Ş 15.88 ± .010 [.625 ] +0.08 5.54 -0.00 +.003 [.218 ] -.000 Recommended Part No. 415567-1 Panel Cutout Part No. 1274935-1 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 76 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 RF Coax Connectors BNC Connectors, 75 Ohm (Continued) Bulkhead Jack-Push On Plug Adapter + 0.13 Ş 9.65 – 0.00 Ş 8.43 + .005 Max. [.380 ] – .000 [.332] ± 0.13 8.89 ± .005 [.350 ] 41.92 Ş 14.35 [1.650] Max. [.565] Recommended Panel Cutout Part No. 1274007-1 Note: Part Numbers are RoHS compliant except: �Indicates non-RoHS compliant. 77 Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208