TE CONNECTIVITY 536255-2

MICTOR SB Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) MICTOR SB Interconnection System (Continued) A Ref. 0.50 [.020] Centerline B 30.00 [1.181] Stack Height 20.00 Typ. [.788] Plugs 5.97 Position No. 1 [.235] ± 0.04 6.73 ± .002 [.265 ] 7.14 Ref. 0.20 29 Spaces at [.281] Typ. [.008] 0.50 [.020] Typ. = 14.50 [.571] A + 0.08 29.24 Note: Parts are available with – 0.03 + .003 vacuum dots for robotic [1.151 – .001 ] placement. 0.95 [.038] TOL D 0.94 A [.037] Section A-A 1.33 C [.053] Ø 0.89 Ref. [.035] 16.89 [.665] 5.28 6.35 0.30 [.208] [.250] Typ. 1.45 [.012] Pad Position No. 2 [.057] 0.64 Typ. 3.10 [.025] [.122] 1.05 2 Plcs. Orientation Hole E Spaces at [.041] 2 Plcs. 20.00 [.788] = F Position No. 1 B Ref. C Ref. Recommended PC Board Layout (Viewed from Connector Side) Gold Flash Plating 10 μ Gold Plating Dimensions Packaging No. of Vacuum Dots Vacuum Dots Type Positions AB C D E F Without With Without With 20.02 14.50 18.49 0.10 0.00 60 0 1658061-1 — 1658030-1 — .788 .571 .728 .004 .000 40.01 34.51 38.48 0.10 20.00 120 1 1658061-2 — 1658030-2 — 1.575 1.359 1.515 .004 .788 60.02 54.51 58.50 0.10 40.00 Tray 180 2 1658061-3 — 1658030-3 — 2.363 2.146 2.303 .004 1.575 80.01 74.51 78.49 0.15 60.01 240 3 1658061-4 — 1658030-4 — 3.150 2.934 3.090 .006 2.362 100.03 94.51 98.50 0.15 80.01 300 4 1658061-5 — 1658030-5 — 3.938 3.721 3.878 .006 3.150 Note: All part numbers are RoHS compliant. 65 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 D High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Introduction to the Micro-Strip Interconnection System (1.27 x 2.54 [.050 x .100] Centerline) Product Facts
Designed for high speed applications
Provides controlled impedance
Low inductance
High density
Superior electrical performance down to 100 picosecond rise times
40 high speed signal lines per inch
Daughtercard-to- motherboard stacking connectors available in sizes of 40 to 240 positions
Custom stacking heights available: between 10.92 [.430] and 18.75 [.738] or 31.12 [1.225] and 38.94 [1.533]
Cable-to-board system available in sizes of 40 to 120 positions
Vertical and right-angle board mount receptacles for Tyco Electronics Micro-Strip teristic impedance plus the PC board ground plane, cable connectors connectors are a high very low inductance and that ground plane is
Connector housings are density, controlled capacitance. extended through the polarized impedance connector mated connector. Discontinuities resulting
Recognized under the family compatible with the from connector structure Resistance is minimized Component Program requirements of high den- and solder interfaces are by a large contact area and of Underwriters sity and high speed data dimensionally small and short electrical length, pro- Laboratories Inc., transmission technologies. R therefore appear transpar- viding signal return paths File No. E28476 Each signal line within the ent to high speed signals. with negligible ground loop
Certified by Canadian mated connector is located Both vertical and right- voltages. Since signal Standards at a specific distance from angle board-to-board and return is via the bus bars, R Association, an integral, separable bus cable-to-board connector signal-ground-signal File No. LR 7189 bar serving as a ground versions share a nominal alternation, common to plane in a micro-strip impedance of 50 ohms high speed applications, configuration. The selection (single ended) or 100 ohms becomes unnecessary. All of housing dielectric, (differential pair). contacts can be dedicated spacing from signal to signal transmission, Each one inch length of contact-to-ground plane effectively doubling connector houses two elec- and conductor geometry connector density. trically isolated high current provide a specific charac- contacts. When soldered to 66 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 Micro-Strip Interconnection System Micro-Strip Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Introduction to the Micro-Strip Interconnection System (1.27 x 2.54 [.050 x .100] Centerline) (Continued) Vertical Board-to-Board Stacking Applications Performance Characteristics Vertical Plug Connector Impedance — (Pages 68 and 70) 50 ohms ±10% at 1 ns Vertical Receptacle Configuration — 2.54 [.100] (See page 73) signal row-to-signal row, 10.92 31.12 Extended Mated 1.27 [.050] signal-to-ground, [.430] [1.225] Vertical Stacking Receptacle 1.27 [.050] signal-to-signal Vertical Height (Above) Plugs (See pages 68-70) Vertical Receptacle (See page 73) Vertical Plug (Pages 71 and 72) 18.75 Mated [.738] Vertical 38.94 Plugs [1.533] (See pages 71 and 72) Stacking Height Extended Vertical Receptacle (Above) Right-Angle Board-to-Board Application* (Small Paddlecard Applications) Vertical Right-Angle Plugs Receptacles (See pages 68-70) (See pages 74 and 75) 9.27 [.365] * Not recommended for use as a daughtercard/backplane interconnector. Vertical and Right-Angle Cable-to-Board Applications (Ref. Tyco Electronics Catalog 65069, Micro-Strip Cable Assemblies) 67 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Vertical Plugs with Guides (Board-to-Board) 10.92 [.430] B Stacking Height Position No. 1 Indicator Material and Finish Housing — High-temperature thermo- 7.24 [.285] plastic, flame retardant, natural color Bus Bar — Phosphor bronze; duplex plated 0.00076 [.000030] gold in mat- Position No. 2 C ing area, 0.00254 [.000100] tin-lead in Indicator terminating area, with entire bus under- A plated 0.00127 [.000050] nickel Signal Pin — Phosphor bronze; duplex plated 0.00076 [.000030] gold in 4.83 mating area, 0.00254 [.000100] tin-lead [.190] 8.64 in terminating area, with entire contact [.340] underplated 0.00127 [.000050] nickel Related Product Data Performance Characteristics — Solder Tail page 67 (see chart) Mating Receptacles — pages 73, 74 and 76 Technical Documents — page 81 Position No. 3 D spaces at 1.27 [.050] = E Position No. 1 Ground Bus 4 spaces at 1.27 [.050] = 5.08 [.200] Position No. 1 Position No. 2 +0.08 0.71 -0.15 Position No. 4 +.003 .028 [ -.006] Dia. Typ. Recommended PC Board Layout Part Numbers Dimensions No. of 2.41 [.095] 3.18 [.125] Positions ABC D E Solder Tail Solder Tail 30.84 29.08 26.62 24.13   40 19 536280-1 536272-1 1.214 1.145 1.048 .950 43.54 41.78 39.32 36.83   60 29 536280-2 536272-2 1.714 1.645 1.548 1.450 56.24 54.48 52.02 49.53   80 39 536280-3 536272-3 2.214 2.145 2.048 1.950 68.94 67.18 64.72 62.23   100 49 536280-4 536272-4 2.714 2.645 2.548 2.450 81.64 79.88 77.42 74.93   120 59 536280-5 536272-5 3.214 3.145 3.048 2.950 94.34 92.58 90.12 87.63   140 69 536280-6 536272-6 3.714 3.645 3.548 3.450 107.04 105.28 102.82 100.33   160 79 536280-7 536272-7 4.214 4.145 4.048 3.950 119.74 117.98 115.52 113.03   180 89 536280-8 536272-8 4.714 4.645 4.548 4.450 132.44 130.68 128.22 125.73   200 99 536280-9 536272-9 5.214 5.145 5.048 4.950 Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant;  Indicates “5 of 6 compliant” (lead in solderable interface only). 68 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 Micro-Strip Interconnection System Micro-Strip Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Vertical Plugs with Guides (Board-to-Board) (Continued) 10.92 [.430] Position No. 1 Stacking Height Indicator A B Material and Finish D Housing — High-temperature thermo- plastic, flame retardant, natural color 7.24 [.285] Bus Bar — Phosphor bronze; duplex plated 0.00076 [.000030] gold in mat- ing area, 0.00254 [.000100] tin-lead in E terminating area, with entire bus under- C 4.47 plated 0.00127 [.000050] nickel 3.35 Position No. 2 Dia [.176] [.132] Indicator (2 Plc.) Signal Pin — Phosphor bronze; duplex plated 0.00076 [.000030] gold in 4.83 mating area, 0.00254 [.000100] tin-lead [.190] 8.64 in terminating area, with entire contact [.340] underplated 0.00127 [.000050] nickel Related Product Data Solder Tail Performance Characteristics — (see chart) page 67 Mating Receptacles — page 75 Technical Documents — page 81 Position No. 3 B 8.89 [.350] 8.89 [.350] F spaces at 1.27 [.050] = G Position No. 1 Ground Bus 4 spaces Position No. 1 at 1.27 [.050] = 5.08 [.200] +0.08 3.18 0.71 Position No. 2 Dia. [.125] -0.15 (2 Plc.) +.003 Position No. 4 .028 [ ] -.006 Note: Guide Pins must be Recommended PC Board Layout purchased separately; order Part Number 536304-2. Part Number Dimensions No. of 3.18 [.125] Positions AB CD E F G Solder Tail 114.30 105.41 94.34 92.58 90.12 87.63 140  69 536303-1 4.500 4.150 3.714 3.645 3.548 3.450 127.00 118.11 107.04 105.28 102.82 100.33 160  79 536303-2 5.000 4.650 4.214 4.145 4.048 3.950 152.40 143.51 132.44 130.68 128.22 125.73 200  99 536303-4 6.000 5.560 5.214 5.145 5.048 4.950 Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant;  Indicates “5 of 6 compliant” (lead in solderable interface only). 69 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Vertical Plugs with ACTION PIN Contacts (Board-to-Board) 10.92 [.430] B Position No. 1 Stacking Height Indicator 7.24 Material and Finish [.285] Housing — High-temperature thermo- plastic, flame retardant, natural color Bus Bar — Phosphor bronze; duplex C Position No. 2 plated 0.00076 [.000030] gold in mat- Indicator A ing area, 0.00254 [.000100] tin-lead in terminating area, with entire bus under- plated 0.00127 [.000050] nickel 4.83 Signal Pin — Phosphor bronze; [.190] duplex plated 0.00076 [.000030] gold in 8.64 [.340] mating area, 0.00254 [.000100] tin-lead in terminating area, with entire contact underplated 0.00127 [.000050] nickel Related Product Data Performance Characteristics — ACTION PIN Tail page 67 (see chart) Mating Receptacles — pages 73, 74 and 76 ACTION PIN Contacts — Position No. 3 pages 78 and 79 D spaces at 1.27 [.050] = E Application Tooling — Position No. 1 pages 80 Technical Documents — page 81 Ground Bus 4 spaces at 1.27 [.050] = 5.08 [.200] Position No. 1 Position No. 2 0.61±0.05 Dia. Typ. [.024±.002] Position No. 4 After Plating Recommended PC Board Layout (Connector Side of Board Shown) Part Numbers Dimensions No. of 3.68 [.145] Positions ABC D E ACTION PIN Tail 30.84 29.08 26.62 24.13  40 536274-1 19 1.214 1.145 1.048 .950 56.24 54.48 52.02 49.53  80 536274-3 39 2.214 2.145 2.048 1.950 68.94 67.18 64.72 62.23  100 536274-4 49 2.714 2.645 2.548 2.450 81.64 79.88 77.42 74.93  120 536274-5 59 3.214 3.145 3.048 2.950 94.34 92.58 90.12 87.63  140 536274-6 69 3.714 3.645 3.548 3.450 107.04 105.28 102.82 100.33  160 536274-7 79 4.214 4.145 4.048 3.950 119.74 117.98 115.52 113.03  180 536274-8 89 4.714 4.645 4.548 4.450 Note: Refer to page 78 for information on ACTION PIN. Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant;  Indicates “5 of 6 compliant” (lead in solderable interface only). 70 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 Micro-Strip Interconnection System Micro-Strip Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Vertical Plugs (Board-to-Board) Position No. 1 18.75 [.738] B Indicator Stacking Height 4.78 7.24 2.54 [.100] Material and Finish [.188] [.285] Housing — High-temperature thermo- plastic, flame retardant, natural color Bus Bar — Phosphor bronze; duplex Position No. 2 C plated 0.00076 [.000030] gold in mat- Indicator A ing area, 0.00254 [.000100] tin-lead in terminating area, with entire bus under- plated 0.00127 [.000050] nickel Signal Pin — Phosphor bronze; 4.83 [.190] duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire contact underplated 0.00127 [.000050] nickel 16.46 [.648] Related Product Data Performance Characteristics — page 67 Mating Receptacles — pages 73, 74 and 76 Technical Documents — page 81 Solder Tail (see chart) Position No. 3 D spaces at 1.27 [.050] = E Position No. 1 Ground Bus 4 spaces at 1.27 [.050] = 5.08 [.200] Position No. 1 Position No. 2 0.71±0.08 Dia. Typ. [.028±.003] Position No. 4 Recommended PC Board Layout (Component Side of Board) Part Numbers Dimensions No. of 2.41 [.095] 3.18 [.125] 4.70 [.185] Positions AB C D E Solder Tail Solder Tail Solder Tail 30.84 29.21 26.62 24.13    40 19 149009-1 149011-1 149012-1 1.214 1.150 1.048 .950 43.54 41.91 39.32 36.83    60 29 149009-2 149011-2 149012-2 1.714 1.650 1.548 1.450 56.24 54.61 52.02 49.53    80 39 149009-3 149011-3 149012-3 2.214 2.150 2.048 1.950 68.94 67.31 64.72 62.23   100 49 149009-4 149011-4 — 2.714 2.650 2.548 2.450 81.64 80.01 77.42 74.93   120 59 149009-5 149011-5 — 3.214 3.150 3.048 2.950 94.34 92.71 90.12 87.63   140 69 149009-6 149011-6 — 3.714 3.650 3.548 3.450 107.04 105.41 102.82 100.33   160 79 149009-7 149011-7 — 4.214 4.150 4.048 3.950 119.74 118.11 115.52 113.03   180 89 149009-8 149011-8 — 4.714 4.650 4.548 4.450 132.44 130.81 128.22 125.73   200 99 149009-9 149011-9 — 5.214 5.150 5.048 4.950 Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant;  Indicates “5 of 6 compliant” (lead in solderable interface only). 71 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Vertical Plugs with ACTION PIN Contacts (Board-to-Board) 18.75 [.738] Position No. 1 Stacking Height B Indicator Material and Finish 7.24 2.54 Housing — High-temperature thermo- [.285] [.100] plastic, flame retardant, natural color Bus Bar — Phosphor bronze; duplex plated 0.00076 [.000030] gold in mat- Position No. 2 ing area, 0.00254 [.000100] tin-lead in C Indicator terminating area, with entire bus under- A plated 0.00127 [.000050] nickel Signal Pin — Phosphor bronze; duplex plated 0.00076 [.000030] gold in 4.83 mating area, 0.00254 [.000100] tin-lead [.190] in terminating area, with entire contact underplated 0.00127 [.000050] nickel 16.46 [.648] Related Product Data Performance Characteristics — page 67 Mating Receptacles — pages 73, 74 and 76 ACTION PIN Contacts — pages 78 and 79 Application Tooling — ACTION PIN Tail pages 80 (see chart) Technical Documents — page 81 Position No. 3 D spaces at 1.27 [.050] = E Position No. 1 Ground Bus 4 spaces at 1.27 [.050] = 5.08 [.200] Position No. 1 Position No. 2 0.61±0.05 Dia. Typ. [.024±.002] Position No. 4 After Plating Recommended PC Board Layout (Connector Side of Board Shown) Part Numbers Dimensions No. of 3.68 [.145] 4.83 [.190] Positions AB C D E ACTION PIN Tail ACTION PIN Tail 30.84 29.21 26.62 24.13   40 19 149013-1 149014-1 1.214 1.150 1.048 .950 43.54 41.91 39.32 36.83  60 29 149013-2 — 1.714 1.650 1.548 1.450 68.94 67.31 64.72 62.23  100 49 149013-4 — 2.714 2.650 2.548 2.450 94.34 92.71 90.12 87.63   140 69 149013-6 149014-6 3.714 3.650 3.548 3.450 Note: Refer to page 78 for information on ACTION PIN. Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant;  Indicates “5 of 6 compliant” (lead in solderable interface only). 72 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 Micro-Strip Interconnection System Micro-Strip Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Vertical Receptacles (Board-to-Board) Material and Finish Housing — High-temperature thermo- A plastic, flame retardant, natural color Position No. 2 Receptacle Bus — Phosphor bronze; duplex plated 0.00076 [.000030] gold in 7.24 [.285] mating area, 0.00254 [.000100] tin-lead in terminating area, with entire bus underplated 0.00127 [.000050] nickel Position No. 1 B Receptacle Contact — Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 1.02 [.040] [.000100] tin-lead in terminating area, with entire contact underplated 0.00127 [.000050] nickel 4.93 [.195] Related Product Data Performance Characteristics — page 67 2.16 Mating Plugs — pages 68, 70-72 [.085] Technical Documents — page 81 Solder Tail (see chart) Position No. 4 C spaces at 1.27 [.050] = D Position No. 2 Ground Bus 4 spaces at 1.27 [.050] = 5.08 [.200] Position No. 1 Position No. 1 +0.08 0.71 -0.15 Position No. 3 +.003 .028 [ ] -.006 Dia. Typ. Recommended PC Board Layout (Connector Side of Board Shown) Part Numbers Dimensions No. of 2.41 [.095] 3.18 [.125] 4.57 [.180] Positions AB C D Solder Tail Solder Tail Solder Tail 28.96 26.34 24.13 40 19    536279-1 536254-1 536255-1 1.140 1.037 .950 41.66 39.01 36.83 60 29    536279-2 536254-2 536255-2 1.640 1.537 1.450 54.36 51.74 49.53 80 39    536279-3 536254-3 536255-3 2.140 2.037 1.950 67.06 64.44 62.23 100 49    536279-4 536254-4 536255-4 2.640 2.537 2.450 79.76 77.14 74.93 120 59    536279-5 536254-5 536255-5 3.140 3.037 2.950 92.48 89.84 87.63 140 69    536279-6 536254-6 536255-6 3.640 3.537 3.450 105.16 102.54 100.33 160 79    536279-7 536254-7 536255-7 4.140 4.037 3.950 117.86 115.24 113.03 180 89   536279-8 536254-8 — 4.640 4.537 4.450 130.56 127.94 125.73 200 99    536279-9 536254-9 536255-9 5.140 5.037 4.950 143.26 140.64 138.43 220 109  1-536279-0 —— 5.640 5.537 5.450 155.96 153.34 151.13 240 119  1-536279-1 —— 6.140 6.037 5.950 Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant;  Indicates “5 of 6 compliant” (lead in solderable interface only). 73 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Right-Angle Receptacles (Board-to-Board) Material and Finish 3.18 Housing — High-temperature thermo- Dia. A [.125] plastic, flame retardant, natural color (2 Plc) B Receptacle Bus — Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire bus 12.19 [.480] underplated 0.00127 [.000050] nickel Receptacle Contact — Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, 1.01 with entire contact underplated 0.00127 [.040] [.000050] nickel Position No. 2 C Indicator 8.00 Related Product Data [.315] Performance Characteristics — page 67 Mating Plugs — pages 68, 70-72 Position No. 1 Indicator Technical Documents — page 81 Solder Tail (see chart) Position No. 4 D spaces at 6.35 6.35 1.27 [.050] = E [.250] [.250] Position No. 2 4 spaces at 1.27 [.050] = 5.08 [.200] Ground Bus Position No. 1 3.18 Position No. 1 Dia. [.125] +0.08 0.71 Position No. 3 (2 Plc.) -0.15 +.003 .028 [ ] -.006 Dia. Typ. Recommended PC Board Layout (Connector Side of Board Shown) Part Numbers Dimensions No. of 2.41 [.095] 3.18 [.125] Positions AB C D E Solder Tail Solder Tail 43.18 36.83 26.34 24.13 40   19 536295-1 536297-1 1.700 1.450 1.037 .950 55.88 49.53 39.04 36.83 60   29 536295-2 536297-2 2.200 1.950 1.537 1.450 68.58 62.23 51.74 49.53 80   39 536295-3 536297-3 2.700 2.450 2.037 1.950 81.28 74.93 64.44 62.23 100   49 536295-4 536297-4 3.200 2.950 2.537 2.450 93.98 87.63 77.14 74.93 120   59 536295-5 536297-5 3.700 3.450 3.037 2.950 106.68 100.33 89.84 87.63 140  69 — 536297-6 4.200 3.950 3.537 3.450 119.38 113.03 102.54 100.33 160  79 536295-7 — 4.700 4.450 4.037 3.950 144.78 138.43 127.94 125.73 200   99 536295-9 536297-9 5.700 5.450 5.037 4.950 Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant;  Indicates “5 of 6 compliant” (lead in solderable interface only). 74 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208 Micro-Strip Interconnection System Micro-Strip Interconnection System High Speed Fine Pitch Connectors (MICTOR, MICTOR SB, Micro-Strip and STEP-Z Interconnection Systems) Micro-Strip Right-Angle Receptacles with Guides (Board-to-Board) Material and Finish Housing — High-temperature thermo- 3.18 Dia. A [.125] plastic, flame retardant, natural color B (2 Plc) Receptacle Bus — Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 [.000100] tin-lead in terminating area, with entire bus 12.19 [.480] underplated 0.00127 [.000050] nickel Receptacle Contact — Phosphor bronze; duplex plated 0.00076 [.000030] gold in mating area, 0.00254 1.01 [.040] Position No. 2 [.000100] tin-lead in terminating area, Indicator 3.56 [.140] Dia. with entire contact underplated 0.00127 C (2 Plc) [.000050] nickel 8.00 [.315] Related Product Data Performance Characteristics — page 67 Position No. 1 Indicator Mating Plugs — pages 69 Solder Tail Technical Documents — page 81 (see chart) Position No. 4 8.89 D spaces at 8.89 [.350] 1.27 [.050] = E [.350] Position No. 2 4 spaces at 1.27 [.050] = 5.08 [.200] Ground Bus Position No. 1 3.18 Dia. Position No. 1 [.125] +0.08 0.71 (2 Plc.) -0.15 Position No. 3 +.003 .028 [ ] -.006 Dia. Typ. Recommended PC Board Layout (Connector Side of Board Shown) Part Numbers Dimensions No. of 2.41 [.095] 3.18 [.125] Positions AB C D E Solder Tail Solder Tail 48.26 41.91 26.34 24.13  40 536296-9 — 19 1.900 1.650 1.037 .950 111.76 105.41 89.84 87.63  140 536296-3 — 69 4.400 4.150 3.537 3.450 124.46 118.11 102.54 100.33   160 536296-4 149031-1 79 4.900 4.650 4.037 3.950 149.86 143.51 127.94 125.73  200 536296-6 — 99 5.900 5.650 5.037 4.950 175.26 168.91 153.34 151.13  240 — 149031-2 119 6.900 6.650 6.037 5.950 Note: Part Numbers are RoHS compliant except:
Indicates non-RoHS compliant;  Indicates “5 of 6 compliant” (lead in solderable interface only). 75 Catalog 65194 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 6-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208