TE CONNECTIVITY 55PC0813-22-9CS2769

55PC0813 SPECIFICATION CONTROL DRAWING TITLE Date Revision WIRE, RADIATION-CROSSLINKED, MODIFIED, ETFE-INSULATED, 07-15-04 D GENERAL PURPOSE, NORMAL AIRFRAME This specification sheet forms a part of the latest issue of Raychem Specifiction 55PC. CONDUCTOR - NICKEL-COATED COPPER INSULATION - RADIATION-CROSSLINKED, MODIFIED ETFE CONSTRUCTION DETAILS FINISHED WIRE CONDUCTOR DIAMETER ( in.) DIAMETER WEIGHT MAXIMUM CONDUCTOR WIRE ( in.) ( lbs/1000 ft. ) RESISTANCE PART NUMBER SIZE STRANDING LOWER UPPER TARGET AT 20°C 1/ (number x AWG) (AWG) SPEC SPEC LOWER SPEC TARGET UPPER SPEC TARGET UPPER SPEC VALUE (ohms/1000 ft.) LIMIT LIMIT LIMIT VALUE LIMIT VALUE LIMIT 55PC0813-26-* 26 19 x 38 .0175 .0183 42.2 .0366 .0385 .0404 1.55 1.70 .0191 24 2.18 55PC0813-24-* 19 x 36 .0225 .0233 .0241 25.9 .0416 .0435 .0454 2.34 55PC0813-22-* 22 16.0 .0476 .0495 .0514 3.12 3.30 19 x 34 .0285 .0293 .0301 55PC0813-20-* 20 19 x 32 .0365 .0375 .0385 9.77 .0561 .0580 .0599 4.64 4.85 18 .0659 .0680 .0701 6.94 55PC0813-18-* 19 x 30 .0452 .0464 .0476 6.10 7.27 55PC0813-16-* 16 19 x 29 .0514 .0527 4.76 .0737 .0760 .0783 8.80 9.17 .0538 14 13.50 55PC0813-14-* 19 x 27 .0644 .0659 .0674 3.00 .0896 .0920 .0944 13.99 55PC0813-12-* 12 1.98 .1076 .1105 .1134 20.45 21.08 37 x 28 .0825 .0845 .0865 55PC0813-10-* 10 37 x 26 .1050 .1070 .1090 1.24 .1290 .1330 .1370 31.73 32.78 8 .188 .196 .203 56.8 55PC0813- 8-* 133 x 29 .158 .163 .169 .694 59.9 55PC0813- 6-* 6 133 x 27 .198 .205 .436 .233 .242 .251 89.7 94.7 .212 4 146. 55PC0813- 4-* 133 x 25 .250 .260 .268 .275 .300 .311 .322 154. 55PC0813- 2-* 2 .177 .370 .383 .397 227. 240. 665 x 30 .320 .330 .340 55PC0813- 0-* 0 1045 x 30 .395 .415 .425 .113 .449 .466 .483 343. 366. 00 .505 .525 .545 450. 55PC0813-00-* 1330 x 30 .440 .462 .475 .089 481. WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 200°C SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 in. (maximum) in 12 in. INSULATION ELONGATION AND TENSILE STRENGTH: VOLTAGE WITHSTAND TEST (Post Environmental): Maximum continuous conductor temperature Total Insulation, 2500 volts (rms) VOLTAGE RATING: 600 volts (rms) at sea level Elongation, 50% (minimum) COLOR: White preferred Tensile Strength, 5000 lbf/in² (minimum) PART NUMBER: CROSSLINK VERIFICATION: 300 ± 3°C for 1 hour INSULATION FLAWS: The "*" in the part numbers above shall be replaced by IDENTIFICATION AND COLOR STRIPING DURABILITY: Spark Test, 3.0 kV (rms) color code designators. 125 cycles (250 strokes) (minimum), 500 g weight Impulse Dielectric Test, 8.0 kV (peak) 1/ Example: AWG 22, white: 55PC0813-22-9 INSULATION THICKNESS: .010 in. (nominal) total insulation AWG 22, white with black stripe: 55PC0813-22-90 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. R R R R R Wire & Cable 501 Oakside Avenue DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL Redwood City, CA 94063-3800 Page 1 of 1 Phone: 1-800-227-8816 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. Fax: 1-650-361-6297 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.