TE CONNECTIVITY 580249-000

55PC0211 SPECIFICATION CONTROL DRAWING Date Revision TITLE WIRE, RADIATION-CROSSLINKED, MODIFIED, ETFE-INSULATED, 07-08-04 H GENERAL PURPOSE, LIGHT AIRFRAME This specification sheet forms a part of the latest issue of Raychem Specifiction 55PC. CONDUCTOR - TIN-COATED COPPER INSULATION - RADIATION-CROSSLINKED, MODIFIED ETFE CONSTRUCTION DETAILS FINISHED WIRE CONDUCTOR DIAMETER ( in.) DIAMETER WEIGHT MAXIMUM WIRE CONDUCTOR ( in.) ( lbs/1000 ft. ) RESISTANCE PART NUMBER SIZE STRANDING LOWER UPPER TARGET AT 20°C 1/ SPEC UPPER SPEC (AWG) (number x AWG) SPEC LOWER SPEC TARGET TARGET UPPER SPEC VALUE (ohms/1000 ft.) LIMIT LIMIT VALUE LIMIT VALUE LIMIT LIMIT 55PC0211-26-* .0183 .0362 1.38 1.52 26 19 x 38 .0175 .0191 41.3 .0328 .0345 55PC0211-24-* 24 19 x 36 .0225 .0233 .0241 26.2 .0378 .0395 .0412 1.98 2.13 55PC0211-22-* .0293 2.90 3.06 22 19 x 34 .0285 .0301 16.2 .0438 .0455 .0472 55PC0211-20-* .0365 .0375 .0385 .0557 4.38 4.57 20 19 x 32 9.88 .0523 .0540 55PC0211-18-* 18 19 x 30 .0452 .0464 .0476 6.23 .0616 .0635 .0654 6.59 6.90 55PC0211-16-* .0527 .0730 8.37 8.70 16 19 x 29 .0514 .0538 4.81 .0690 .0710 55PC0211-14-* 14 19 x 27 .0644 .0659 .0674 3.06 .0838 .0860 .0882 12.88 13.33 55PC0211-12-* .0845 19.73 20.30 12 37 x 28 .0825 .0865 2.02 .1020 .1047 .1074 55PC0211-10-* .1050 .1070 .1090 .1328 31.12 32.13 10 37 x 26 1.26 .1252 .1290 55PC0211- 8-* 8 133 x 29 .158 .163 .169 .701 .188 .196 .203 56.8 59.9 55PC0211- 6-* .205 .251 89.7 94.7 6 133 x 27 .198 .212 .445 .233 .242 55PC0211- 4-* 4 133 x 25 .250 .260 .268 .280 .300 .311 .322 145. 154. 55PC0211- 2-* .330 227. 240. 2 665 x 30 .320 .340 .183 .370 .383 .397 55PC0211- 1-* .360 .370 .380 .438 278. 291. 1 817 x 30 .152 .410 .424 55PC0211- 0-* 0 1045 x 30 .395 .415 .425 .116 .449 .466 .483 343. 366. 55PC0211-00-* .462 .545 450. 481. 00 1330 x 30 .440 .475 .091 .505 .525 WIRE RATINGS AND ADDITIONAL REQUIREMENTS TEMPERATURE RATING: 150°C INSULATION ELONGATION AND TENSILE STRENGTH: SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 in.(maximum) in 12 in. Maximum continuous conductor temperature Total Insulation, VOLTAGE WITHSTAND TEST (Post Environmental): VOLTAGE RATING: 600 volts (rms) at sea level Elongation, 50% (minimum) 2500 volts (rms) COLOR: White preferred Tensile Strength, 5000 lbf/in² (minimum) PART NUMBER: CROSSLINK VERIFICATION: 300 ± 3°C for 1 hour INSULATION FLAWS: The "*" in the part numbers above shall be replaced by IDENTIFICATION AND COLOR STRIPING DURABILITY: Spark Test, 3.0 kV (rms) color code designators. 125 cycles (250 strokes) (minimum), 500 g weight Impulse Dielectric Test, 8.0 kV (peak) 1/ Example: AWG 22, white: 55PC0211-22-9 INSULATION THICKNESS: .008 in. (nominal) total insulation AWG 22, white with black stripe: 55PC0211-22-90 Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. 1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER. R R R R R Wire & Cable 501 Oakside Avenue DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL Redwood City, CA 94063-3800 Page 1 of 1 Phone: 1-800-227-8816 THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN. Fax: 1-650-361-6297 REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.