TE CONNECTIVITY 7-1414778-3

Automotive Relays High Current Devices Battery Disconnect Switch BDS-A (Latching) n Limiting continuous current 190A at 85°C n Electrically settable and resettable ON/OFF bistable device n Suitable for voltage levels up to 42VDC 1) n High peak current carrying capability up to 1500A Typical applications Preheating systems (e.g. for diesel engines, catalytic converters), battery disconnection to prevent fire caused by short circuits during an accident, dual battery applications provide the start reliability by a separate starter battery, keeps the power net in balance and to control and secure the health of the energy storage systems, seasonal, service and transport deactivation, high current switching, energy management, battery coupling. F130_fcw1_bw Contact Data 12VDC 24VDC Contact arrangement 1 form X, 1 NO DM (bridge) Insulation Data Rated voltage 12VDC 24VDC Initial dielectric strength 2) Max. switching voltage depends on load parameter between open contacts 500V rms Rated current between contact and coil 500V rms 2 load current from Terminal B to A, cable 50mm 260A Limiting continuous current 2 23°C, load cable 50mm 260A Other Data 2 85°C, load cable 50mm 190A Ambient temperature -40°C to +120°C 2 125°C, load cable 50mm 88A Degree of protection Limiting making current, dustproof/splash water proof: IP54 (IEC 60529), RT I (IEC 61810) 2 resistive load, cable 50mm , 23°C, Vibration resistance (functional) 1) ton/toff=0.5s/10min 1500A, >5 ops. IEC 60068-2-6 (sine sweep) 22 to 500Hz, min. 10g. Limiting breaking current, Shock resistance (functional) 2 4) resistive load, cable 50mm , 23°C, IEC 60068-2-27 (half sine) 11ms, min. 40g 1) ton/toff=0.5s/10min 1500A, >5 ops. Terminal type connector and screw Limiting short-time current, Weight approx. 210g (7.4oz) 2 5) overload current at 23°C, cable 50mm , Packaging unit and delivery 24 pcs. 3 3) 1000A,1s - 0A, 9s 50x10 ops. 4) No change in the switching state >10µs. 5) Bistable relays are delivered in the reset position (open contacts). Due to mechanical Contact material AgSnO 2 impacts during transportation, we advise to check the contact status on receipt. Contact style bridge contact Latching (delivery status “ex works”). Initial voltage drop at 100A <40mV post 1min Operate/release time typ. 5ms at 14VDC (coil voltage) Electrical endurance inductance 0.1mH, temperature change 2 (-40/25/120°C) 2h each; cable 35mm 3 180A, ton/off >13x10 ops., 1.5/5s. 3 100A, ton/off >50x10 ops., 1.5/5s Terminal Assignment 3 150A, ton/off >25x10 ops., 0.5/5s 3 100A, ton/off >70x10 ops., 0.5/5s X2D2C 3 Mechanical endurance >150x10 ops. 1 form X, 1 NO DM (bridge), 1) Important: please pay attention to load current direction. with 2 coils and 2 diodes 2) Please contact TE relay application engineer. 3) Values are influenced by system temperature and load current. For further details please consult TE relay application engineers. Coil Data Magnetic system bistable (two coil system) Rated coil voltage 12/24VDC Max. coil power approx. 7W at 20°C for Uon/Uoff Max. coil temperature 155°C Coil versions, bistable 2 coils Coil Rated Set Reset Coil Impulse code voltage voltage voltage resistance length VDC VDC VDC Ω±10% ms 2021 12 6 6 4.7 15 to 100 2421 24 12 12 19.9 15 to 100 All figures are given for coil without preenergization, at ambient temperature +23°C. 1 06-2012, Rev. 0612 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions Automotive Relays High Current Devices Battery Disconnect Switch BDS-A (Latching) (Continued) 2 06-2012, Rev. 0612 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions Automotive Relays High Current Devices Battery Disconnect Switch BDS-A (Latching) (Continued) Product code structure Typical product code V23130 -C 2021 -A 4 00 Type V23130 Battery Disconnect Switch BDS-A Contact arrangement C 1 form X, 1 NO DM Coil 2021 12VDC (bistable) 2421 24VDC (bistable) Protection class A IP54 Contact material 4 AgSnO2 Standard version 00 Standard Product code Arrangement Coil Circuit Coil suppr. Protection Terminals Feature Part number V23130-C2021-A412 1 form X, 12VDC X2D2C Diode IP54 Screw + Bracket 1-1414939-4 V23130-C2421-A431 1 NO DM (bridge) 24VDC connector 7-1414778-3 This list represents the most common types and does not show all variants covered by this datasheet. Other types on request. 3 06-2012, Rev. 0612 Datasheets and product specification ac- Datasheets and product data is subject to the Datasheets, product data, ‘Definitions’ sec- www.te.com cording to IEC 61810-1 and to be used only terms of the disclaimer and all chapters of tion, application notes and all specifications © 2011 Tyco Electronics Corporation, together with the ‘Definitions’ section. the ‘Definitions’ section, available at are subject to change. a TE Connectivity Ltd. company. http://relays.te.com/definitions