SPECIFICATION CONTROL DRAWING 7528A5314 05-07-04 75 OHM, AWG 28, Date: 7 STRANDS OF AWG 36, TRIAXIAL CABLE CHEMINAX F Revision: THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE CHARACTERISTIC IMPEDANCE 75 ± 3 ohms, Method B DESIGNATED. CAPACITANCE 17.8 pF/ft. (nominal) at 1 kHz CONDUCTOR 19.0 pF/ft. (maximum) at 1 kHz .015 AWG 28, 7 Strands of AWG 36, Silver-Coated VELOCITY OF PROPAGATION 76% (nominal) High Strength Copper Alloy DIELECTRIC ® .065 Rayfoam L Color - Natural ADDITIONAL REQUIREMENTS ELECTRICAL ST 1 SHIELD CONDUCTOR RESISTANCE 74.0 ohms/1000 ft. (nominal) .082 AWG 38, INSULATION RESISTANCE 10,000 megohms (minimum) Tin-Coated Copper (CONDUCTOR TO SHIELD) for 1000 ft. JACKET FLAWS SPARK TEST 1.0 kV (rms) IMPULSE TEST 6.0 kV, (peak) VOLTAGE WITHSTAND ST 1 JACKET (DIELECTRIC) .102 ® Thermorad S CONDUCTOR TO SHIELD 1000 volts (rms) (minimum) Color - Black SHIELD TO SHIELD 500 volts (rms) (minimum) ENVIRONMENTAL FLAMMABILITY Method C ND 2 SHIELD HEAT SHOCK 225°C .119 AWG 38, LOW TEMPERATURE- -55°C/3.75 inch mandrel Tin-Coated Copper COLD BEND VOLTAGE WITHSTAND (POST ENVIRONMENTAL) 1000 volts (rms), 1 minute PHYSICAL INSULATION (DIELECTRIC) ND 2 JACKET ELONGATION 50% (minimum) .139 ® Thermorad S TENSILE STRENGTH 1000 lbf/in² (minimum) (nominal) JACKET (EACH) .146 ELONGATION 200% (minimum) (maximum) TENSILE STRENGTH 2000 lbf/in² (minimum) JACKET THICKNESS (EACH) .010 inch (nominal) SHIELD COVERAGE (EACH) 90% (minimum) CABLE IDENTIFICATION Mark outer jacket in contrasting color at 12 inch (nominal) intervals: "7528A5314 - 06090" Outer jacket color will be black (designated by a "-0" appended to the part number, e.g. 7528A5314-0) unless otherwise specified. Designate outer jacket color with a dash number in accordance with MIL-STD-681. Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. WEIGHT 15.3 lbs/1000 ft. (nominal) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. THIS SPECIFICATION SHEET TAKES PRECEDENCE 501 Oakside Avenue RRR RR OVER DOCUMENTS REFERENCED HEREIN. REFERENCED Redwood City, California 94063-3800 DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT Wire & Cable 1-800-227-8816 Fax: 1-650-361-6297 ON DATE OF INVITATION FOR BID.