SPECIFICATION CONTROL DRAWING 7530D5634 Date 3-27-13 75 OHM, AWG 30, 7 STRANDS OF AWG 38, TRIAXIAL CABLE CHEMINAX Revision D THIS SPECIFICATION SHEET FORMS A PART OF THE LATEST ISSUE OF RAYCHEM SPECIFICATION 1200. CONSTRUCTION DETAILS ELECTRICAL CHARACTERISTICS DIMENSIONS ARE NOMINAL VALUES IN INCHES UNLESS OTHERWISE DESIGNATED. CHARACTERISTIC IMPEDANCE 75 ± 3 ohms, Method B CAPACITANCE 20.6 pF/ft. (nominal) CONDUCTOR VELOCITY OF PROPAGATION 66% (nominal) .0120 AWG 30, 7 Strands of AWG 38, Silver-Coated High-Strength Copper ADDITIONAL REQUIREMENTS Alloy DIELECTRIC ELECTRICAL .067 Rayolin F ± .002 Color - Natural CONDUCTOR RESISTANCE 116. ohms/1000 ft. (nominal) INSULATION RESISTANCE 10,000 megohms (minimum) (CONDUCTOR TO SHIELD) for 1000 ft. st JACKET FLAWS 1 SHIELD SPARK TEST 1.0 kV (rms) .084 AWG 38, IMPULSE TEST 6.0 kV (peak) Tin-Coated Copper VOLTAGE WITHSTAND CONDUCTOR TO SHIELD 1000 volts (rms) (minimum) SHIELD TO SHIELD 500 volts (rms) (minimum) st 1 JACKET .104 Thermorad S ENVIRONMENTAL ± .005 Color - Black FLAMMABILITY Method B HEAT SHOCK 225°C LOW TEMPERATURE-COLD BEND -55°C/3.75 inch mandrel nd 2 SHIELD VOLTAGE WITHSTAND 1000 volts (rms), 1 minute .121 AWG 38, (Post Environmental) Tin-Coated Copper PHYSICAL INSULATION (DIELECTRIC) ELONGATION 200% (minimum) 2 TENSILE STRENGTH 1800 lbf/in (minimum) st 1 JACKET nd 2 JACKET ELONGATION 200% (minimum) .137 Radiation-Crosslinked 2 TENSILE STRENGTH 2000 lbf/in (minimum) (nominal) Modified ETFE nd 2 JACKET .152 ELONGATION 50% (minimum) (maximum) 2 TENSILE STRENGTH 5000 lbf/in (minimum) st 1 JACKET THICKNESS .010 inch (nominal) nd 2 JACKET THICKNESS .008 inch (nominal) SHIELD COVERAGE (EACH) 90% (minimum) Outer jacket color will be white (designated by a “-9)" appended to the part number, e.g. 7530D5634-9) unless otherwise specified. Designate outer jacket color with a dash number in accordance with MIL-STD-681. Other codes and suffixes may be added to the part number, as necessary, to capture any additional requirements imposed by the purchase order. WEIGHT 16.0 lbs/1000 ft. (nominal) Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice. Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer. Page 1 of 1 Rayolin, Thermorad, Cheminax, Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks. Raychem Wire & Cable THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS 501 Oakside Avenue REFERENCED HEREIN. REFERENCED DOCUMENTS SHALL BE OF THE Redwood City, California 94063-3800 ISSUE IN EFFECT ON DATE OF INVITATION FOR BID. 1-800-227-8816 Fax: 1-650-361-6297 © 2013 Tyco Electronics Corporation, All rights reserved.