TE CONNECTIVITY 765271-1

AMPOWER Wave Crimp System METRIC Dimensions are millimeters over inches Power Connectors & Interconnection Systems AMPOWER Wave Crimp System Product Facts ■ Termination of flat cable requires no stripping, does not reduce cable cross sec- tion and pro vides a reliable, low resistance, gas tight interface ■ Separable interfaces have positive locking, polariza- tion and contact shrouding ■ Right-angle and vertical headers on 2.54 [.100] centers, accommodate stan- dard 1.02 [.040] PCB hole diameters ■ Four cable self-aligning connector can pickup 2.03 [.080] misalignment off a common axis and measures 80 amps per cable (at 30°C temperature rise) depend- ing upon the application ■ Unique tap permits branch- ing of trunk lines to serve multiple distribution points ■ Assemblies are measured at 80–110 amps (with 30°C Today’s intelligent systems ping and discrete wire Typical Applications temperature rise) depend- require more sophisticated tapping. ■ Mass Storage ing upon mounting interface power distribution solutions ■ Switches Blindmate drawer connec- than ever before. Even the ■ Various Power Distribution ■ Recognized under the tors feature sequential mat- conductor geometry can Applications Component Program of ing and signal contacts. make a significant impact Underwriters Technical Documents AMPOWER flat cable on systems performance. R Laboratories Inc., Product Specifications assemblies provide a Flat conductors offer desir- File No. E28476, unique and effective means 108-1308 Separable able packaging advantages: No. E13288, and No. Interface of distributing power from ■ Improved heat dissipation E53799 source to load in today’s 108-1313 Terminal Block & Stud resulting in higher current Interface ■ Certified by Canadian high speed, high density capacity or reduced Standards Association, systems. 108-1315 Cable Tap Interface operating temperature. File No. 108-1319 Drawer R ■ Low inductance, high LR7189A-149 Performance Data Connector capacitance power 108-1387 FASTON Wire Tap distribution. Voltage Rating — 250 V AC ■ Reduced noise. RMS/DC. Single conductor cable 108-1391 Side Tap assemblies are available with a 600 V ■ Packaging flexibility. 108-1323 Cable Specification AC RMS/DC rating. 108-1410 ACTION PIN Header The AMPOWER Wave Dielectric Withstanding Voltage — 108-1436 Cable-to-Cable Drawer Crimp System is the first Power Contact: 1500 VAC Connector power distribution system to Signal Contact: 1200 VAC 108-1479 ACTION PIN Self-Aligning offer a cost effective, totally Insulation Resistance — Connector mechanical termination 5000 megohms initial 108-1403 Self-Aligning Header and method for insulated flat 1000 megohms final Receptacle copper cable. Temperature Range — 108-1408 Wave Crimp System �55°C to +105°C Assemblies provide: (Cable-to-Cable) Current Rating — Refer to Product A fully shrouded and polar- Application Specification and/or Application Specifications. ized separable interface 114-49005 with right-angle and vertical board-mount headers. The first flat cable tap that allows branching from pri- mary trunk lines, side tap- 205 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666 METRIC Dimensions are millimeters over inches Power Connectors & Interconnection Systems AMPOWER Wave Crimp System (Continued) Applications The variety of AMPOWER wave crimp system interfaces available from Tyco Electronics make flat copper cable a versatile and innovative systems solution to power Cable-to-Cable distribution. Separable Interface Separable Interface and Taps Service Multiple Distribution Points on Either Backplane or Daughtercards Interfacing to Intermediate Copper Bus Bars Permits Current Stepping in Large Systems Blindmate Drawer Connectors Enhance System Modularity Side Taps Permit Both Current Bussing and Joining of Two Cables .250 FASTON Tab Makes Interfacing to Round Wire Possible 30 and 50 AMP Standard Terminal Block Interconnects for Versatility and Reliability Direct Interface to Power Supply Studs 206 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666 AMPOWER Wave Crimp System AMPOWER Wave Crimp System METRIC Dimensions are millimeters over inches Power Connectors & Interconnection Systems AMPOWER Wave Crimp System (Continued) Copper Cable Options Circular Approx MILS AWG Amps Copper cable used in Per Conductor AMPOWER wave crimp system assemblies are available in a variety of 25.86 Max. Typ. [1.018] thicknesses and widths. ±0.020 ±0.13 0.25 25.07 The most common cable ±.0008 ±.005 [.010 ] [.987 ] sizes are shown here. 0.61 Max. 12,566 9 80 [.024] Resistance Conductor Thickness Single Conductor Single Dual 0.25 .912 2.030 .010 0.51 .456 .996 .020 Note: The D.C. resistance of a 304.80 [12.00] length of conductor, when measured at 25°C and 10 amps, shall be < this figure (in milliohms). ±0.13 11.43 ±0.020 0.25 ±.005 [.450 ] ±.0008 [.010 ] 0.61 Max. 5,729 13 40/40 [.024] Dual Conductor ±0.033 0.51 ±.0013 [.020 ] 0.86 Max. 25,133 6 110 [.034] Single Conductor ±0.033 0.51 ±.0013 [.020 ] 0.86 Max. 11,459 10 55/55 [.034] Dual Conductor 207 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666 METRIC Dimensions are millimeters over inches Power Connectors & Interconnection Systems AMPOWER Wave Crimp System (Continued) Terminal Block and Terminal Block Interface (14.27 [.562] Centerline) Stud Interface 6.35 11.4 21.3 4.34 [.250] [.45] [.84] [.171] 9.65 [.380] Material and Finish Housing — UL 94V-0 rated 36.1 14.27 [1.420] thermoplastic, black [.562] Contacts — Copper alloy silver on termination and mating interface. 9.65 27.4 [.380] 27.4 [1.08] All over nickel base plate. 6.86 Max. 11.4 [1.08] [.270] Typ. [.45] Terminal Block Interface (17.48 [.688] Centerline) 17.3 11.43 7.52 [.68] 6.86 [.450] [.296] [.270] 17.48 36.1 [.688] [1.420] 33.3 33.3 11.43 [1.31] [1.31] [.450] 6.86 Max. 17.3 [.270] Typ. [.68] Part Numbers Centerline Termination Spacing Cover Assembly 14.24 — 765228-1 Full Width .562 — — 765229-1 Half Width 17.48 765225-1 765228-1 Full Width .688 — 765225-1 765229-1 Half Width Stud Interface A Dia. 36.1 25.4 [1.420] [1.000] 15.2 [.60] 6.86 Max. 31 [.27] [1.22] Hole Part Numbers Stud Size Size Cover (x2) “A” 6.76 1/4" 765228-1 .266 8.33 5/16" 765228-1 .328 Note: All part numbers are RoHS compliant. 208 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666 AMPOWER Wave Crimp System AMPOWER Wave Crimp System METRIC Dimensions are millimeters over inches Power Connectors & Interconnection Systems AMPOWER Wave Crimp System (Continued) Cable-to-Cable Blindmate Receptacle Housing 14.8 [.570] 35.5 [1.40] 19.3 Part Number 766569-1 [.76] 4 Plc. 49.5 15.7 [1.95] [.620] 18.3 Mates with [.720] Part Number 765528-1* Ref. *Panel-mount (765530-1) or squeeze-to-release (765529-1) strain relief can be used on either 766569-1 or 765528-1 housing. At least one housing must have the squeeze-to-release strain relief; the panel-mount strain relief is optional on the mating housing. Separable Interface Plug Part Number 765191-1 Material and Finish Housing — UL94V-0 rated thermoplastic, black Contact — Copper alloy silver on termination and mating Polarizing Rib 50.8 interface. [2.00] Tin-lead on header solder and 7.2 ACTION PIN contact Tails. [.28] 26.4 All over nickel base plate. [1.04] Mates with Part Numbers 765478, 765204, 765206 Cable-to-Cable Receptacle Part Number 765478-1 8.9 [.35] 5 47 36.6 [1.85] [1.52] 53.6 Available with or without [2.11] mounting flanges Mates with Part Number 765191 Note: All part numbers are RoHS compliant. 209 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666 METRIC Dimensions are millimeters over inches Power Connectors & Interconnection Systems AMPOWER Wave Crimp System (Continued) Separable Interface — Vertical Header Headers Allow 6.6 [.26] for Mating Cable to PCB Material and Finish 17.02 2 Plcs. [.670] Housing — UL94V-0 rated thermoplastic, black Contact — Copper alloy Eyelet 53.85 X Min. 2 Plcs. 2 Plcs. silver on termination and mating [2.120] interface. Tin-lead on header solder and ACTION PIN contact Tails. “X” Tail Type Housing Part Numbers All over nickel base plate. 3.15 Standard Temp, Solder Tail 765206-1 .124 Black 5.72 Standard Temp, Solder Tail 765206-4 .225 Black 4.19 High Temp, Solder Tail 765206-6 .165 Natural 3.66 Standard Temp, 1 ACTION PIN Tail 765271-1 .144 Black 1 Uses insertion tool Part Number 765312-1 Horizontal Header 8.08 2 Plcs. [.318] X Min. 12 Plcs. Mates with Part Number 766569-1 “X” Tail Type Housing Part Numbers 4.19 Standard Temp, Solder Tail 765204-2 .165 Black 3.15 High Temp, Solder Tail 765204-5 .124 Natural 4.19 High Temp, Solder Tail 765204-6 .165 Natural Note: Recommended mounting hardware, 2 #4-40 screws and nuts, or 2 eyelets Tyco Electronics Part Number 748572-2. Note: All part numbers are RoHS compliant. 210 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666 AMPOWER Wave Crimp System AMPOWER Wave Crimp System METRIC Dimensions are millimeters over inches Power Connectors & Interconnection Systems AMPOWER Wave Crimp System (Continued) Half Width Plug Header Plug Material and Finish Housing — UL94V-0 rated thermoplastic, black Contact — Copper alloy Polarizing Rib 35.1 silver on termination and mating [1.38] interface. 7.2 27.5 [.28] Tin-lead on header solder and [1.08] ACTION PIN contact Tails. All over nickel base plate. Horizontal Header 38.6 [1.52] .370 [9.4] X Min. A Typ. 1.300 [33] 2.36 Typ. [.093] Vertical Header 34.3 [1.35] 4 Max. 23.6 [.93] X Min. Header Pin Header Assembly Part Numbers Pitch “X” Tail Type Horizontal Vertical “A” 3.15 Solder Tail 765450-1 765449-1 .124 4.19 Solder Tail 765450-2 765449-2 .165 2.54 .100 5.72 Solder Tail 765450-4 765449-4 .225 3.66 ACTION PIN Tail — 765451-1 .144 1 High temperature material. Notes: Recommended mounting hardware, 2 #4-40, screws and nuts or, 2 eyelets Tyco Electronics Part Number 748572-2, customer supplied. Allow 5.65 [.262] for mating cable to PCB. Note: All part numbers are RoHS compliant. 211 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666 METRIC Dimensions are millimeters over inches Power Connectors & Interconnection Systems AMPOWER Wave Crimp System (Continued) Mid-Cable Terminations Tap 35.8 [1.41] Material and Finish Housing — UL94V-0 rated thermoplastic, black 20.3 Contact — Silver plated [.80] 9.4 copper alloy Max. [.37] All over nickel base plate. Trunk Branch .250 FASTON Tab Tap 37.1 35.8 [1.46] [1.41] 1 1. FASTON Receptacles not included. Use Ultra-Pod fully insulated FASTON receptacles with 18 AWG to 12 AWG wire. 13.1 [.52] Side-Tap 7.1 3.906 [.28] 14.7 [.154] [.58] 35.8 [1.41] 20.3 9.4 [.80] [.37] Max. Right-Angle Side-Tap 5.2 [.20] Part Numbers Termination Type Termination Assembly Housing Cover Housing Base Flat Cable 765277-1 765278-1 — .250 FASTON Tab 765276-1 765295-1 765296-1 1 ⁄4" Stud — 765278-1 — 1 ⁄4" Stud 765311-1 765278-1 — Note: Connectors on this page are capable of terminating up to two 0.51 [.020] thick cables. Note: All part numbers are RoHS compliant. 212 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666 AMPOWER Wave Crimp System AMPOWER Wave Crimp System METRIC Dimensions are millimeters over inches Power Connectors & Interconnection Systems AMPOWER Wave Crimp System (Continued) Self-Aligning Headers 2 Cable Header Material and Finish Housing — UL94V-0 rated 66.5 55.9 thermoplastic, black 1 [2.62] [2.20] Contact — Copper alloy silver on mating interface Tin-lead on solder tails. Part Number 765608-1 ALL over nickel base plate. Signal contact gold plate. 4 Cable Header 88.9 2.4 Max. Thk. [3.50] 57.1 Mated [.093] Bulkhead 1 99.6 [2.25] Assembly [3.92] Part Number 766510-1 4.2±0.4 [.165±.015] 19.6 3, 4 4 Cable Header w/8 Signal Lines [.77] Typical For All Right-Angle Headers 106.7 [4.20] 117.3 1 [4.62] 31.8 14.5 [1.25] [.57] 3, 4 4 Cable Header w/21 Signal Lines X Min. 6.4 [.25] Typical For All Vertical Headers 111.8 [4.40] 122.4 1 [4.82] Outline For Receptacle Assembly Part Numbers 41.9 Max. Tail [1.65] “X” 2 Cable 4 Cable 4 Cable Header 4 Cable Header Type 3 3 Header Header 8 Signal Lines 21 Signal Lines 3.10 Solder 765527-1 765208-1 765249-1 765265-1 .122 Tail 3.96 Solder 765527-2 765208-2 765249-2 765265-2 .156 Tail Typical For All Vertical Headers 3.66 ACTION PIN 765527-5 765208-5 765249-5 765265-5 .144 Tail 1 Mounting holes offset from centerline of part .76 [.030]. 2 High temperature material. 3 Mates with MINI-TANDEM contact, Tyco Electronics Part Number 530553-x. Reference Catalog 82055. 4 Signal pins not shown for clarity. Notes: Tail length "x" is 4.20 (.165) for all right-angle headers. Recommended mounting hardware, 2 #4-40, screws and nuts or, 2 eyelets Tyco Electronics Part Number 748572-2, customer supplied. Note: All part numbers are RoHS compliant. 213 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666 METRIC Dimensions are millimeters over inches Power Connectors & Interconnection Systems AMPOWER Wave Crimp System (Continued) 36.3 Self-Aligning Receptacles 2 Cable Receptacle [1.43] 1 (Float-Mount) Max. Material and Finish Housing — UL94V-0 rated thermoplastic, black Contact — Copper alloy 18.55 71.1 silver on termination and [.730] [2.80] mating interface. 3 3 2 Typical For All 2 All over nickel base plate. Self-Aligning Signal contact see page 213. 1 Receptacles 4 Cable Receptacle 103.9 [4.09] 3 3 2 4 1 3 4 Cable Receptacle w/8 Signal Lines 121.7 [4.79] 3 3 2 4 1 3 2 4 Cable Receptacle w/21 Signal Lines 126.8 [4.99] 3 3 2 2 4 1 3 Part Numbers 2 Cable w/o 4 Cable w/o 4 Cable w/8 4 Cable w/21 Signal Lines Signal Lines Signal Lines Signal Lines Housing 765528-1 765247-1 765224-1 765261-1 Strain Relief 765530-1 765250-1 765238-1 765238-1 Ground Contacts 765209-1 765209-1 765209-1 765209-1 Power Contacts 765209-2 765209-2 765209-2 765209-2 1 Service loop suggested, allows for connector float. 2 Recommended mounting hardware, Tyco Electronics Part Number 208211-4, 2 required per kit and 2 #6-32 nuts (customer supplied). 3 Polarizing ribs, 2 places. Note: Custom signal module assemblies available with power assemblies. Note: All part numbers are RoHS compliant. 214 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666 2 AMPOWER Wave Crimp System AMPOWER Wave Crimp System METRIC Dimensions are millimeters over inches Power Connectors & Interconnection Systems AMPOWER Wave Crimp System (Continued) Self-Aligning Receptacles 2 Cable Receptacle 35.6 (Latching) [1.40] 1 Max. Material and Finish Housing — UL94V-0 rated thermoplastic, black Contact — Copper alloy silver on termination and mating 57.9 Ref. 18.55 interface. [2.28] [.730] 2 2 All over nickel base plate. 2 Typical For All Signal contact see page 213. Self-Aligning 1 Receptacles 4 Cable Receptacle 90.2 Ref. [3.55] 2 2 2 4 1 3 4 Cable Receptacle w/8 Signal Lines 109.7 Ref. [4.32] 2 2 2 4 1 3 4 Cable Receptacle w/21 Signal Lines 115.3 Ref. [4.54] 2 2 2 4 1 3 Part Numbers 4 Cable w/8 4 Cable w/21 2 Cable 4 Cable Signal Lines Signal Lines Housing 765528-1 765247-1 765224-1 765261-1 Strain Relief 765529-1 765248-1 765251-1 765251-1 Ground Contacts 765209-1 765209-1 765209-1 765209-1 Power Contacts 765209-2 765209-2 765209-2 765209-2 1 Service loop suggested, allows for connector disconnection. 2 Polarizing ribs, 2 places. Note: Custom signal module assemblies available with power assemblies. Note: All part numbers are RoHS compliant. 215 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666 METRIC Dimensions are millimeters over inches Power Connectors & Interconnection Systems AMPOWER Wave Crimp System (Continued) Cable-to-Cable Plug Connector w/8 Signal Lines Material and Finish 1 Housing — UL94V-0 rated thermoplastic, black 114 2 Contact — Copper alloy [4.49] silver plated All over nickel base plate. Mates with — Self-Aligning receptacle, 12.1 Conductor #4 Conductor #2 [.48] with 8 signal lines. Conductor #3 Conductor #1 Part Numbers 4 Cable w/8 Signal Lines Housing 765241-1 Strain Relief 765242-1 1 Service loop suggested, when float-mount strain relief used (not shown). 2 Polarizing slots, 2 places. Note: Custom signal module assemblies available with power assemblies. Self-Aligning Right-Angle Connector w/48 Signal Lines 121 112 [4.77 ] [4.40] Product Facts ■ Right-angle header for .06"–.12" PWB thickness 1 1 2 2 ■ 8 DC contacts Floating Receptacle Plug Header ■ 48 signal contacts ■ 3 possible levels of sequencing ■ Blindmate with .19" total mismate alignment ■ Polarization ■ Mechanical PWB fasteners Header Assembly ■ Drop-in-place custom PN 766090-1 assemblies Side View Receptacle Assembly With Custom Cables Mated Assembly 55.9 Material and Finish [2.20] Standard Customer Wave Solder Housing — UL94V-0 rated Termination Supplied thermoplastic, black Brackets Contact — Copper alloy silver on mating interface Tin-lead on header solder tails. All over nickel base plate. 2.4 4.2 ± 0.4 1 [.093] [.165 ] ± .015 Polarizing rib, 2 places. Signal contact gold plate. Max. Thk. Bulkhead 2 Polarizing slot, 2 places. Note: All part numbers are RoHS compliant. 216 Catalog 1773096 Dimensions are in inches and Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000 Revised 2-10 millimeters unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628 specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to change. C. America: 52-55-1106-0803 UK: 44-(0)8002-67666 AMPOWER Wave Crimp System